/linux-6.12.1/drivers/net/dsa/microchip/ |
D | ksz_ptp_reg.h | 9 #define REG_SW_GLOBAL_LED_OVR__4 0x0120 11 #define LED_OVR_1 BIT(0) 13 #define REG_SW_GLOBAL_LED_SRC__4 0x0128 18 #define REG_PTP_CLK_CTRL 0x0500 26 #define PTP_CLK_RESET BIT(0) 28 #define REG_PTP_RTC_SUB_NANOSEC__2 0x0502 30 #define PTP_RTC_SUB_NANOSEC_M 0x0007 31 #define PTP_RTC_0NS 0x00 33 #define REG_PTP_RTC_NANOSEC 0x0504 35 #define REG_PTP_RTC_SEC 0x0508 [all …]
|
D | ksz9477_reg.h | 11 #define KS_PRIO_M 0x7 14 /* 0 - Operation */ 15 #define REG_CHIP_ID0__1 0x0000 17 #define REG_CHIP_ID1__1 0x0001 19 #define FAMILY_ID 0x95 20 #define FAMILY_ID_94 0x94 21 #define FAMILY_ID_95 0x95 22 #define FAMILY_ID_85 0x85 23 #define FAMILY_ID_98 0x98 24 #define FAMILY_ID_88 0x88 [all …]
|
/linux-6.12.1/include/linux/bcma/ |
D | bcma_driver_pcie2.h | 5 #define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000 6 #define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */ 7 #define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */ 8 #define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */ 9 #define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010 10 #define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */ 11 #define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */ 12 #define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */ 13 #define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004 14 #define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008 [all …]
|
D | bcma_driver_chipcommon.h | 10 #define BCMA_CC_ID 0x0000 11 #define BCMA_CC_ID_ID 0x0000FFFF 12 #define BCMA_CC_ID_ID_SHIFT 0 13 #define BCMA_CC_ID_REV 0x000F0000 15 #define BCMA_CC_ID_PKG 0x00F00000 17 #define BCMA_CC_ID_NRCORES 0x0F000000 19 #define BCMA_CC_ID_TYPE 0xF0000000 21 #define BCMA_CC_CAP 0x0004 /* Capabilities */ 22 #define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ 23 #define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/imagination/ |
D | pvr_rogue_cr_defs_client.h | 31 #define ROGUE_CR_TE_AA 0x0C00U 32 #define ROGUE_CR_TE_AA_MASKFULL 0x000000000000000Full 38 #define ROGUE_CR_TE_AA_Y2_CLRMSK 0xFFFFFFF7 39 #define ROGUE_CR_TE_AA_Y2_EN 0x00000008 44 #define ROGUE_CR_TE_AA_Y_CLRMSK 0xFFFFFFFB 45 #define ROGUE_CR_TE_AA_Y_EN 0x00000004 50 #define ROGUE_CR_TE_AA_X_CLRMSK 0xFFFFFFFD 51 #define ROGUE_CR_TE_AA_X_EN 0x00000002 55 #define ROGUE_CR_TE_AA_X2_SHIFT (0U) 56 #define ROGUE_CR_TE_AA_X2_CLRMSK (0xFFFFFFFEU) [all …]
|
/linux-6.12.1/include/linux/ssb/ |
D | ssb_driver_gige.h | 14 #define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ 15 #define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ 16 #define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ 17 #define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ 18 #define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ 19 #define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ 20 #define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ 21 #define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ 22 #define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ 25 #define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/oss/ |
D | oss_1_0_d.h | 26 #define ixCLIENT0_BM 0x0220 27 #define ixCLIENT0_CD0 0x0210 28 #define ixCLIENT0_CD1 0x0214 29 #define ixCLIENT0_CD2 0x0218 30 #define ixCLIENT0_CD3 0x021C 31 #define ixCLIENT0_CK0 0x0200 32 #define ixCLIENT0_CK1 0x0204 33 #define ixCLIENT0_CK2 0x0208 34 #define ixCLIENT0_CK3 0x020C 35 #define ixCLIENT0_K0 0x01F0 [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/media/ |
D | qcom,sdm845-camss.yaml | 96 port@0: 321 iommus = <&apps_smmu 0x0808 0x0>, 322 <&apps_smmu 0x0810 0x8>, 323 <&apps_smmu 0x0c08 0x0>, 324 <&apps_smmu 0x0c10 0x8>; 330 reg = <0 0xacb3000 0 0x1000>, 331 <0 0xacba000 0 0x1000>, 332 <0 0xacc8000 0 0x1000>, 333 <0 0xac65000 0 0x1000>, 334 <0 0xac66000 0 0x1000>, [all …]
|
/linux-6.12.1/drivers/media/platform/st/sti/bdisp/ |
D | bdisp-reg.h | 8 /* 0 - General */ 87 #define BLT_CTL 0x0A00 88 #define BLT_ITS 0x0A04 89 #define BLT_STA1 0x0A08 90 #define BLT_AQ1_CTL 0x0A60 91 #define BLT_AQ1_IP 0x0A64 92 #define BLT_AQ1_LNA 0x0A68 93 #define BLT_AQ1_STA 0x0A6C 94 #define BLT_ITM0 0x0AD0 96 #define BLT_PLUGS1_OP2 0x0B04 [all …]
|
/linux-6.12.1/arch/powerpc/include/asm/ |
D | cell-regs.h | 28 #define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul 29 #define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul 30 #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul 31 #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul 57 u64 pad_0x0000; /* 0x0000 */ 59 u64 group_control; /* 0x0008 */ 61 u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ 63 u64 debug_bus_control; /* 0x00a8 */ 65 u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ 67 u64 trace_aux_data; /* 0x0100 */ [all …]
|
/linux-6.12.1/drivers/media/i2c/s5c73m3/ |
D | s5c73m3.h | 44 #define AHB_MSB_ADDR_PTR 0xfcfc 45 #define REG_CMDWR_ADDRH 0x0050 46 #define REG_CMDWR_ADDRL 0x0054 47 #define REG_CMDRD_ADDRH 0x0058 48 #define REG_CMDRD_ADDRL 0x005c 49 #define REG_CMDBUF_ADDR 0x0f14 51 #define REG_I2C_SEQ_STATUS S5C73M3_REG(0x0009, 0x59A6) 52 #define SEQ_END_PLL (1<<0x0) 53 #define SEQ_END_SENSOR (1<<0x1) 54 #define SEQ_END_GPIO (1<<0x2) [all …]
|
/linux-6.12.1/drivers/iommu/ |
D | fsl_pamu.h | 22 #define PAMU_PGC 0x00000000 /* Allows all peripheral accesses */ 23 #define PAMU_PE 0x40000000 /* enable PAMU */ 26 #define PAMU_OFFSET 0x1000 28 #define PAMU_MMAP_REGS_BASE 0 46 #define PAMU_POES1 0x0040 47 #define PAMU_POES2 0x0044 48 #define PAMU_POEAH 0x0048 49 #define PAMU_POEAL 0x004C 50 #define PAMU_AVS1 0x0050 51 #define PAMU_AVS1_AV 0x1 [all …]
|
/linux-6.12.1/drivers/video/fbdev/kyro/ |
D | STG4000Reg.h | 54 NO_LUT = 0, RESERVED, GRAPHICS, OVERLAY 59 _8BPP = 0, _15BPP, _16BPP, _24BPP, _32BPP 64 GRAPHICS_MODE = 0, COLOR_KEY, PER_PIXEL_ALPHA, GLOBAL_ALPHA, 75 /* 0h */ 76 volatile u32 Thread0Enable; /* 0x0000 */ 77 volatile u32 Thread1Enable; /* 0x0004 */ 78 volatile u32 Thread0Recover; /* 0x0008 */ 79 volatile u32 Thread1Recover; /* 0x000C */ 80 volatile u32 Thread0Step; /* 0x0010 */ 81 volatile u32 Thread1Step; /* 0x0014 */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/msm/adreno/ |
D | a4xx_gpu.c | 30 for (i = 0; i < submit->nr_cmds; i++) { in a4xx_submit() 61 OUT_RING(ring, 0x00000000); in a4xx_submit() 80 for (i = 0; i < 4; i++) in a4xx_enable_hwcg() 81 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL_TP(i), 0x02222202); in a4xx_enable_hwcg() 82 for (i = 0; i < 4; i++) in a4xx_enable_hwcg() 83 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_CTL2_TP(i), 0x00002222); in a4xx_enable_hwcg() 84 for (i = 0; i < 4; i++) in a4xx_enable_hwcg() 85 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_HYST_TP(i), 0x0E739CE7); in a4xx_enable_hwcg() 86 for (i = 0; i < 4; i++) in a4xx_enable_hwcg() 87 gpu_write(gpu, REG_A4XX_RBBM_CLOCK_DELAY_TP(i), 0x00111111); in a4xx_enable_hwcg() [all …]
|
/linux-6.12.1/include/linux/mfd/ |
D | motorola-cpcap.h | 17 #define CPCAP_VENDOR_ST 0 21 #define CPCAP_REVISION_MINOR(r) ((r) & 0xf) 23 #define CPCAP_REVISION_1_0 0x08 24 #define CPCAP_REVISION_1_1 0x09 25 #define CPCAP_REVISION_2_0 0x10 26 #define CPCAP_REVISION_2_1 0x11 29 #define CPCAP_REG_INT1 0x0000 /* Interrupt 1 */ 30 #define CPCAP_REG_INT2 0x0004 /* Interrupt 2 */ 31 #define CPCAP_REG_INT3 0x0008 /* Interrupt 3 */ 32 #define CPCAP_REG_INT4 0x000c /* Interrupt 4 */ [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtw88/ |
D | rtw8723x.h | 28 IQK_ROUND_INVALID = 0xff, 45 u8 mac_addr[ETH_ALEN]; /* 0xd0 */ 53 u8 res4[48]; /* 0xd0 */ 54 u8 vendor_id[2]; /* 0x100 */ 55 u8 product_id[2]; /* 0x102 */ 56 u8 usb_option; /* 0x104 */ 57 u8 res5[2]; /* 0x105 */ 58 u8 mac_addr[ETH_ALEN]; /* 0x107 */ 62 u8 res4[0x4a]; /* 0xd0 */ 63 u8 mac_addr[ETH_ALEN]; /* 0x11a */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/gma500/ |
D | psb_reg.h | 13 #define PSB_CR_CLKGATECTL 0x0000 16 #define _PSB_C_CLKGATECTL_USE_CLKG_MASK (0x3 << 20) 18 #define _PSB_C_CLKGATECTL_DPM_CLKG_MASK (0x3 << 16) 20 #define _PSB_C_CLKGATECTL_TA_CLKG_MASK (0x3 << 12) 22 #define _PSB_C_CLKGATECTL_TSP_CLKG_MASK (0x3 << 8) 24 #define _PSB_C_CLKGATECTL_ISP_CLKG_MASK (0x3 << 4) 25 #define _PSB_C_CLKGATECTL_2D_CLKG_SHIFT (0) 26 #define _PSB_C_CLKGATECTL_2D_CLKG_MASK (0x3 << 0) 27 #define _PSB_C_CLKGATECTL_CLKG_ENABLED (0) 31 #define PSB_CR_CORE_ID 0x0010 [all …]
|
/linux-6.12.1/arch/powerpc/platforms/ps3/ |
D | spu.c | 36 SPE_TYPE_LOGICAL = 0, 46 u8 padding_0140[0x0140]; 47 u64 int_status_class0_RW; /* 0x0140 */ 48 u64 int_status_class1_RW; /* 0x0148 */ 49 u64 int_status_class2_RW; /* 0x0150 */ 50 u8 padding_0158[0x0610-0x0158]; 51 u64 mfc_dsisr_RW; /* 0x0610 */ 52 u8 padding_0618[0x0620-0x0618]; 53 u64 mfc_dar_RW; /* 0x0620 */ 54 u8 padding_0628[0x0800-0x0628]; [all …]
|
/linux-6.12.1/drivers/media/i2c/ccs/ |
D | smiapp-reg-defs.h | 19 #define SMIAPP_REG_U16_MODEL_ID CCI_REG16(0x0000) 20 #define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR CCI_REG8(0x0002) 21 #define SMIAPP_REG_U8_MANUFACTURER_ID CCI_REG8(0x0003) 22 #define SMIAPP_REG_U8_SMIA_VERSION CCI_REG8(0x0004) 23 #define SMIAPP_REG_U8_FRAME_COUNT CCI_REG8(0x0005) 24 #define SMIAPP_REG_U8_PIXEL_ORDER CCI_REG8(0x0006) 25 #define SMIAPP_REG_U16_DATA_PEDESTAL CCI_REG16(0x0008) 26 #define SMIAPP_REG_U8_PIXEL_DEPTH CCI_REG8(0x000c) 27 #define SMIAPP_REG_U8_REVISION_NUMBER_MINOR CCI_REG8(0x0010) 28 #define SMIAPP_REG_U8_SMIAPP_VERSION CCI_REG8(0x0011) [all …]
|
/linux-6.12.1/drivers/usb/mtu3/ |
D | mtu3_hw_regs.h | 14 #define SSUSB_DEV_BASE 0x0000 15 #define SSUSB_EPCTL_CSR_BASE 0x0800 16 #define SSUSB_USB3_MAC_CSR_BASE 0x1400 17 #define SSUSB_USB3_SYS_CSR_BASE 0x1400 18 #define SSUSB_USB2_CSR_BASE 0x2400 21 #define SSUSB_SIFSLV_IPPC_BASE 0x0000 25 #define U3D_LV1ISR (SSUSB_DEV_BASE + 0x0000) 26 #define U3D_LV1IER (SSUSB_DEV_BASE + 0x0004) 27 #define U3D_LV1IESR (SSUSB_DEV_BASE + 0x0008) 28 #define U3D_LV1IECR (SSUSB_DEV_BASE + 0x000C) [all …]
|
/linux-6.12.1/drivers/edac/ |
D | ie31200_edac.c | 19 * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller 20 * 0c08: Xeon E3-1200 v3 Processor DRAM Controller 60 #define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108 61 #define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c 62 #define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150 63 #define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158 64 #define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c 65 #define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04 66 #define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08 67 #define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x190F [all …]
|
/linux-6.12.1/drivers/media/platform/qcom/camss/ |
D | camss-csiphy-3ph-1-0.c | 3 * camss-csiphy-3ph-1-0.c 5 * Qualcomm MSM Camera Subsystem - CSIPHY Module 3phase v1.0 18 #define CSIPHY_3PH_LNn_CFG1(n) (0x000 + 0x100 * (n)) 20 #define CSIPHY_3PH_LNn_CFG2(n) (0x004 + 0x100 * (n)) 22 #define CSIPHY_3PH_LNn_CFG3(n) (0x008 + 0x100 * (n)) 23 #define CSIPHY_3PH_LNn_CFG4(n) (0x00c + 0x100 * (n)) 24 #define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS 0xa4 25 #define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS_660 0xa5 26 #define CSIPHY_3PH_LNn_CFG5(n) (0x010 + 0x100 * (n)) 27 #define CSIPHY_3PH_LNn_CFG5_T_HS_DTERM 0x02 [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/umc/ |
D | umc_6_7_0_offset.h | 29 // base address: 0x50f00 30 …MCA_UMC_UMC0_MCUMC_STATUST0 0x03c2 31 …e regMCA_UMC_UMC0_MCUMC_STATUST0_BASE_IDX 0 32 …MCA_UMC_UMC0_MCUMC_ADDRT0 0x03c4 33 …e regMCA_UMC_UMC0_MCUMC_ADDRT0_BASE_IDX 0 34 …MCA_UMC_UMC0_MCUMC_MISC0T0 0x03c6 35 …e regMCA_UMC_UMC0_MCUMC_MISC0T0_BASE_IDX 0 36 …MCA_UMC_UMC0_MCUMC_IPIDT0 0x03ca 37 …e regMCA_UMC_UMC0_MCUMC_IPIDT0_BASE_IDX 0 38 …MCA_UMC_UMC0_MCUMC_SYNDT0 0x03cc [all …]
|
/linux-6.12.1/drivers/clk/qcom/ |
D | gcc-msm8994.c | 33 .offset = 0, 36 .enable_reg = 0x1480, 37 .enable_mask = BIT(0), 50 .offset = 0, 63 .offset = 0x1dc0, 66 .enable_reg = 0x1480, 80 .offset = 0x1dc0, 94 { P_XO, 0 }, 104 { P_XO, 0 }, 116 F(50000000, P_GPLL0, 12, 0, 0), [all …]
|
D | gcc-msm8974.c | 36 .l_reg = 0x0004, 37 .m_reg = 0x0008, 38 .n_reg = 0x000c, 39 .config_reg = 0x0014, 40 .mode_reg = 0x0000, 41 .status_reg = 0x001c, 54 .enable_reg = 0x1480, 55 .enable_mask = BIT(0), 67 .l_reg = 0x1dc4, 68 .m_reg = 0x1dc8, [all …]
|