Searched +full:0 +full:xc000000 (Results 1 – 25 of 57) sorted by relevance
123
/linux-6.12.1/Documentation/devicetree/bindings/interrupt-controller/ |
D | riscv,aplic.yaml | 74 first child APLIC domain assigned child index 0. The APLIC domain child 122 reg = <0xc000000 0x4080>; 134 reg = <0xd000000 0x4080>; 144 reg = <0xe000000 0x4080>; 156 reg = <0xc000000 0x4000>; 167 reg = <0xd000000 0x4000>;
|
D | sifive,plic-1.0.0.yaml | 5 $id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml# 39 "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that 43 The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the 64 - const: sifive,plic-1.0.0 75 - const: sifive,plic-1.0.0 84 const: 0 164 #address-cells = <0>; 166 compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; 173 reg = <0xc000000 0x4000000>;
|
/linux-6.12.1/drivers/staging/rtl8192e/rtl8192e/ |
D | r8192E_phyreg.h | 10 #define RF_DATA 0x1d4 12 #define rPMAC_Reset 0x100 13 #define rPMAC_TxStart 0x104 14 #define rPMAC_TxLegacySIG 0x108 15 #define rPMAC_TxHTSIG1 0x10c 16 #define rPMAC_TxHTSIG2 0x110 17 #define rPMAC_PHYDebug 0x114 18 #define rPMAC_TxPacketNum 0x118 19 #define rPMAC_TxIdle 0x11c 20 #define rPMAC_TxMACHeader0 0x120 [all …]
|
/linux-6.12.1/drivers/staging/rtl8712/ |
D | rtl871x_mp_phy_regdef.h | 36 * BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF 38 * 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 39 * 3. RF register 0x00-2E 44 * 1. Page1(0x100) 46 #define rPMAC_Reset 0x100 47 #define rPMAC_TxStart 0x104 48 #define rPMAC_TxLegacySIG 0x108 49 #define rPMAC_TxHTSIG1 0x10c 50 #define rPMAC_TxHTSIG2 0x110 51 #define rPMAC_PHYDebug 0x114 [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/uvd/ |
D | uvd_4_2_sh_mask.h | 27 #define UVD_SEMA_ADDR_LOW__ADDR_22_3_MASK 0xfffff 28 #define UVD_SEMA_ADDR_LOW__ADDR_22_3__SHIFT 0x0 29 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23_MASK 0xfffff 30 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23__SHIFT 0x0 31 #define UVD_SEMA_CMD__REQ_CMD_MASK 0xf 32 #define UVD_SEMA_CMD__REQ_CMD__SHIFT 0x0 33 #define UVD_SEMA_CMD__WR_PHASE_MASK 0x30 34 #define UVD_SEMA_CMD__WR_PHASE__SHIFT 0x4 35 #define UVD_SEMA_CMD__MODE_MASK 0x40 36 #define UVD_SEMA_CMD__MODE__SHIFT 0x6 [all …]
|
D | uvd_3_1_sh_mask.h | 27 #define UVD_SEMA_ADDR_LOW__ADDR_22_3_MASK 0xfffff 28 #define UVD_SEMA_ADDR_LOW__ADDR_22_3__SHIFT 0x0 29 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23_MASK 0xfffff 30 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23__SHIFT 0x0 31 #define UVD_SEMA_CMD__REQ_CMD_MASK 0xf 32 #define UVD_SEMA_CMD__REQ_CMD__SHIFT 0x0 33 #define UVD_SEMA_CMD__WR_PHASE_MASK 0x30 34 #define UVD_SEMA_CMD__WR_PHASE__SHIFT 0x4 35 #define UVD_SEMA_CMD__MODE_MASK 0x40 36 #define UVD_SEMA_CMD__MODE__SHIFT 0x6 [all …]
|
D | uvd_5_0_sh_mask.h | 27 #define UVD_SEMA_ADDR_LOW__ADDR_22_3_MASK 0xfffff 28 #define UVD_SEMA_ADDR_LOW__ADDR_22_3__SHIFT 0x0 29 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23_MASK 0xfffff 30 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23__SHIFT 0x0 31 #define UVD_SEMA_CMD__REQ_CMD_MASK 0xf 32 #define UVD_SEMA_CMD__REQ_CMD__SHIFT 0x0 33 #define UVD_SEMA_CMD__WR_PHASE_MASK 0x30 34 #define UVD_SEMA_CMD__WR_PHASE__SHIFT 0x4 35 #define UVD_SEMA_CMD__MODE_MASK 0x40 36 #define UVD_SEMA_CMD__MODE__SHIFT 0x6 [all …]
|
D | uvd_6_0_sh_mask.h | 27 #define UVD_SEMA_ADDR_LOW__ADDR_22_3_MASK 0xfffff 28 #define UVD_SEMA_ADDR_LOW__ADDR_22_3__SHIFT 0x0 29 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23_MASK 0xfffff 30 #define UVD_SEMA_ADDR_HIGH__ADDR_42_23__SHIFT 0x0 31 #define UVD_SEMA_CMD__REQ_CMD_MASK 0xf 32 #define UVD_SEMA_CMD__REQ_CMD__SHIFT 0x0 33 #define UVD_SEMA_CMD__WR_PHASE_MASK 0x30 34 #define UVD_SEMA_CMD__WR_PHASE__SHIFT 0x4 35 #define UVD_SEMA_CMD__MODE_MASK 0x40 36 #define UVD_SEMA_CMD__MODE__SHIFT 0x6 [all …]
|
/linux-6.12.1/arch/mips/boot/dts/ralink/ |
D | mt7628a.dtsi | 10 #size-cells = <0>; 12 cpu@0 { 15 reg = <0>; 25 #address-cells = <0>; 33 reg = <0x10000000 0x200000>; 34 ranges = <0x0 0x10000000 0x1FFFFF>; 39 sysc: system-controller@0 { 41 reg = <0x0 0x60>; 46 reg = <0x60 0x8>; 48 #size-cells = <0>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/microchip/ |
D | at91sam9m10g45ek.dts | 22 reg = <0x70000000 0x4000000>; 42 timer@0 { 44 reg = <0>, <1>; 54 pinctrl-0 = 70 reg = <0x30>; 72 pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; 98 pinctrl-0 = < 104 slot@0 { 105 reg = <0>; 112 pinctrl-0 = < [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/ |
D | reg.h | 7 #define REG_SYS_ISO_CTRL 0x0000 8 #define REG_SYS_FUNC_EN 0x0002 9 #define REG_APS_FSMCO 0x0004 10 #define REG_SYS_CLKR 0x0008 11 #define REG_9346CR 0x000A 12 #define REG_EE_VPD 0x000C 13 #define REG_AFE_MISC 0x0010 14 #define REG_SPS0_CTRL 0x0011 15 #define REG_SPS_OCP_CFG 0x0018 16 #define REG_RSV_CTRL 0x001C [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/ |
D | reg.h | 7 #define REG_SYS_ISO_CTRL 0x0000 8 #define REG_SYS_FUNC_EN 0x0002 9 #define REG_APS_FSMCO 0x0004 10 #define REG_SYS_CLKR 0x0008 11 #define REG_9346CR 0x000A 12 #define REG_EE_VPD 0x000C 13 #define REG_AFE_MISC 0x0010 14 #define REG_SPS0_CTRL 0x0011 15 #define REG_SPS_OCP_CFG 0x0018 16 #define REG_RSV_CTRL 0x001C [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/ |
D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_SYS_SWR_CTRL1 0x0010 [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/ |
D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_AFE_MISC 0x0010 [all …]
|
/linux-6.12.1/sound/soc/fsl/ |
D | fsl_xcvr.h | 11 #define FSL_XCVR_MODE_SPDIF 0 16 #define FSL_XCVR_REG_OFFSET 0x800 /* regs offset */ 17 #define FSL_XCVR_FIFO_SIZE 0x80 /* 128 */ 23 #define FSL_XCVR_RX_FIFO_ADDR 0x0C00 24 #define FSL_XCVR_TX_FIFO_ADDR 0x0E00 26 #define FSL_XCVR_VERSION 0x00 /* Version */ 27 #define FSL_XCVR_EXT_CTRL 0x10 /* Control */ 28 #define FSL_XCVR_EXT_STATUS 0x20 /* Status */ 29 #define FSL_XCVR_EXT_IER0 0x30 /* Interrupt en 0 */ 30 #define FSL_XCVR_EXT_IER1 0x40 /* Interrupt en 1 */ [all …]
|
/linux-6.12.1/arch/riscv/boot/dts/sifive/ |
D | fu540-c000.dtsi | 24 #size-cells = <0>; 25 cpu0: cpu@0 { 31 reg = <0>; 182 compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; 183 reg = <0x0 0xc000000 0x0 0x4000000>; 184 #address-cells = <0>; 188 <&cpu0_intc 0xffffffff>, 189 <&cpu1_intc 0xffffffff>, <&cpu1_intc 9>, 190 <&cpu2_intc 0xffffffff>, <&cpu2_intc 9>, 191 <&cpu3_intc 0xffffffff>, <&cpu3_intc 9>, [all …]
|
D | fu740-c000.dtsi | 24 #size-cells = <0>; 25 cpu0: cpu@0 { 32 reg = <0x0>; 59 reg = <0x1>; 86 reg = <0x2>; 113 reg = <0x3>; 140 reg = <0x4>; 184 #address-cells = <0>; 185 compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; 186 reg = <0x0 0xc000000 0x0 0x4000000>; [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_AFE_MISC 0x0010 [all …]
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8723be/ |
D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_AFE_MISC 0x0010 [all …]
|
/linux-6.12.1/arch/riscv/boot/dts/starfive/ |
D | jh7100.dtsi | 18 #size-cells = <0>; 20 U74_0: cpu@0 { 22 reg = <0>; 118 #clock-cells = <0>; 121 clock-frequency = <0>; 126 #clock-cells = <0>; 129 clock-frequency = <0>; 134 #clock-cells = <0>; 137 clock-frequency = <0>; 142 #clock-cells = <0>; [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/gmc/ |
D | gmc_8_2_sh_mask.h | 27 #define MC_CONFIG__MCDW_WR_ENABLE_MASK 0x1 28 #define MC_CONFIG__MCDW_WR_ENABLE__SHIFT 0x0 29 #define MC_CONFIG__MCDX_WR_ENABLE_MASK 0x2 30 #define MC_CONFIG__MCDX_WR_ENABLE__SHIFT 0x1 31 #define MC_CONFIG__MCDY_WR_ENABLE_MASK 0x4 32 #define MC_CONFIG__MCDY_WR_ENABLE__SHIFT 0x2 33 #define MC_CONFIG__MCDZ_WR_ENABLE_MASK 0x8 34 #define MC_CONFIG__MCDZ_WR_ENABLE__SHIFT 0x3 35 #define MC_CONFIG__MCDS_WR_ENABLE_MASK 0x10 36 #define MC_CONFIG__MCDS_WR_ENABLE__SHIFT 0x4 [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/net/wireless/ |
D | qcom,ath11k.yaml | 270 reg = <0xc000000 0x2000000>; 271 interrupts = <0 320 1>, 272 <0 319 1>, 273 <0 318 1>, 274 <0 317 1>, 275 <0 316 1>, 276 <0 315 1>, 277 <0 314 1>, 278 <0 311 1>, 279 <0 310 1>, [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/bif/ |
D | bif_4_1_sh_mask.h | 27 #define MM_INDEX__MM_OFFSET_MASK 0x7fffffff 28 #define MM_INDEX__MM_OFFSET__SHIFT 0x0 29 #define MM_INDEX__MM_APER_MASK 0x80000000 30 #define MM_INDEX__MM_APER__SHIFT 0x1f 31 #define MM_INDEX_HI__MM_OFFSET_HI_MASK 0xffffffff 32 #define MM_INDEX_HI__MM_OFFSET_HI__SHIFT 0x0 33 #define MM_DATA__MM_DATA_MASK 0xffffffff 34 #define MM_DATA__MM_DATA__SHIFT 0x0 35 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE_MASK 0x2 36 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE__SHIFT 0x1 [all …]
|
/linux-6.12.1/arch/riscv/boot/dts/canaan/ |
D | k210.dtsi | 27 #size-cells = <0>; 29 cpu0: cpu@0 { 32 reg = <0>; 36 i-cache-size = <0x8000>; 38 d-cache-size = <0x8000>; 52 i-cache-size = <0x8000>; 54 d-cache-size = <0x8000>; 77 reg = <0x80000000 0x400000>, /* sram0 4 MiB */ 78 <0x80400000 0x200000>, /* sram1 2 MiB */ 79 <0x80600000 0x200000>; /* aisram 2 MiB */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/oss/ |
D | oss_2_4_sh_mask.h | 27 #define IH_VMID_0_LUT__PASID_MASK 0xffff 28 #define IH_VMID_0_LUT__PASID__SHIFT 0x0 29 #define IH_VMID_1_LUT__PASID_MASK 0xffff 30 #define IH_VMID_1_LUT__PASID__SHIFT 0x0 31 #define IH_VMID_2_LUT__PASID_MASK 0xffff 32 #define IH_VMID_2_LUT__PASID__SHIFT 0x0 33 #define IH_VMID_3_LUT__PASID_MASK 0xffff 34 #define IH_VMID_3_LUT__PASID__SHIFT 0x0 35 #define IH_VMID_4_LUT__PASID_MASK 0xffff 36 #define IH_VMID_4_LUT__PASID__SHIFT 0x0 [all …]
|
123