/linux-6.12.1/arch/m68k/include/uapi/asm/ |
D | bootinfo-virt.h | 9 #define BI_VIRT_QEMU_VERSION 0x8000 10 #define BI_VIRT_GF_PIC_BASE 0x8001 11 #define BI_VIRT_GF_RTC_BASE 0x8002 12 #define BI_VIRT_GF_TTY_BASE 0x8003 13 #define BI_VIRT_VIRTIO_BASE 0x8004 14 #define BI_VIRT_CTRL_BASE 0x8005 17 * #define BI_VIRT_RNG_SEED 0x8006 */ 19 #define VIRT_BOOTI_VERSION MK_BI_VERSION(2, 0)
|
D | bootinfo-amiga.h | 14 #define BI_AMIGA_MODEL 0x8000 /* model (__be32) */ 15 #define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */ 17 #define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (__be32) */ 18 #define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (__u8) */ 19 #define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (__u8) */ 20 #define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (__be32) */ 21 #define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (__be32) */ 22 #define BI_AMIGA_SERPER 0x8007 /* serial port period (__be16) */ 29 #define AMI_UNKNOWN 0 51 #define CS_STONEAGE 0 [all …]
|
D | bootinfo-mac.h | 14 #define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */ 15 #define BI_MAC_VADDR 0x8001 /* Mac video base address */ 16 #define BI_MAC_VDEPTH 0x8002 /* Mac video depth */ 17 #define BI_MAC_VROW 0x8003 /* Mac video rowbytes */ 18 #define BI_MAC_VDIM 0x8004 /* Mac video dimensions */ 19 #define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */ 20 #define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */ 21 #define BI_MAC_BTIME 0x8007 /* Mac boot time */ 22 #define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */ 23 #define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */ [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/firmware/ |
D | nxp,imx95-scmi.yaml | 20 const: 0x81 28 const: 0x84 36 enum: [0, 1, 2, 3, 4, 5, 6, 7, 0x8000, 0x8001, 0x8002, 0x8003, 37 0x8004, 0x8005, 0x8006, 0x8007]
|
/linux-6.12.1/drivers/media/rc/keymaps/ |
D | rc-dtt200u.c | 12 { 0x8001, KEY_MUTE }, 13 { 0x8002, KEY_CHANNELDOWN }, 14 { 0x8003, KEY_VOLUMEDOWN }, 15 { 0x8004, KEY_NUMERIC_1 }, 16 { 0x8005, KEY_NUMERIC_2 }, 17 { 0x8006, KEY_NUMERIC_3 }, 18 { 0x8007, KEY_NUMERIC_4 }, 19 { 0x8008, KEY_NUMERIC_5 }, 20 { 0x8009, KEY_NUMERIC_6 }, 21 { 0x800a, KEY_NUMERIC_7 }, [all …]
|
D | rc-terratec-slim-2.c | 17 { 0x8001, KEY_MUTE }, /* MUTE */ 18 { 0x8002, KEY_VOLUMEDOWN }, 19 { 0x8003, KEY_CHANNELDOWN }, 20 { 0x8004, KEY_NUMERIC_1 }, 21 { 0x8005, KEY_NUMERIC_2 }, 22 { 0x8006, KEY_NUMERIC_3 }, 23 { 0x8007, KEY_NUMERIC_4 }, 24 { 0x8008, KEY_NUMERIC_5 }, 25 { 0x8009, KEY_NUMERIC_6 }, 26 { 0x800a, KEY_NUMERIC_7 }, [all …]
|
/linux-6.12.1/drivers/clk/qcom/ |
D | videocc-sc7280.c | 28 { 249600000, 2000000000, 0 }, 33 .l = 0x14, 34 .alpha = 0xD555, 35 .config_ctl_val = 0x20485699, 36 .config_ctl_hi_val = 0x00002261, 37 .config_ctl_hi1_val = 0x329A299C, 38 .user_ctl_val = 0x00000001, 39 .user_ctl_hi_val = 0x00000805, 40 .user_ctl_hi1_val = 0x00000000, 44 .offset = 0x0, [all …]
|
D | dispcc-sm4450.c | 46 { 249600000, 2020000000, 0 }, 51 .l = 0x1f, 52 .alpha = 0x4000, 53 .config_ctl_val = 0x20485699, 54 .config_ctl_hi_val = 0x00182261, 55 .config_ctl_hi1_val = 0x32aa299c, 56 .user_ctl_val = 0x00000000, 57 .user_ctl_hi_val = 0x00000805, 61 .offset = 0x0, 78 .offset = 0x1000, [all …]
|
D | gpucc-sm6375.c | 46 { 249600000, 2000000000, 0 }, 51 .l = 0x1b, 52 .alpha = 0xb555, 53 .config_ctl_val = 0x20485699, 54 .config_ctl_hi_val = 0x00002261, 55 .config_ctl_hi1_val = 0x329a299c, 56 .user_ctl_val = 0x00000001, 57 .user_ctl_hi_val = 0x00000805, 58 .user_ctl_hi1_val = 0x00000000, 62 .offset = 0x0, [all …]
|
/linux-6.12.1/drivers/net/wireless/ath/ |
D | reg.h | 20 #define AR_MIBC 0x0040 21 #define AR_MIBC_COW 0x00000001 22 #define AR_MIBC_FMC 0x00000002 23 #define AR_MIBC_CMC 0x00000004 24 #define AR_MIBC_MCS 0x00000008 26 #define AR_STA_ID0 0x8000 27 #define AR_STA_ID1 0x8004 28 #define AR_STA_ID1_SADH_MASK 0x0000ffff 34 #define AR_BSSMSKL 0x80e0 35 #define AR_BSSMSKU 0x80e4 [all …]
|
/linux-6.12.1/drivers/media/usb/gspca/gl860/ |
D | gl860-ov2640.c | 12 static u8 c61[] = {0x61}; /* expected */ 13 static u8 c51[] = {0x51}; /* expected */ 14 static u8 c50[] = {0x50}; /* expected */ 15 static u8 c28[] = {0x28}; /* expected */ 16 static u8 ca8[] = {0xa8}; /* expected */ 27 {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, 28 {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, 29 {0x0050, 0x0000}, {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0061, 0x0006}, 30 {0x006a, 0x000d}, {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, 31 {0x0041, 0x00c2}, {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, [all …]
|
/linux-6.12.1/drivers/media/platform/nuvoton/ |
D | npcm-regs.h | 12 #define VCD_DIFF_TBL 0x0000 13 #define VCD_FBA_ADR 0x8000 14 #define VCD_FBB_ADR 0x8004 16 #define VCD_FB_LP 0x8008 17 #define VCD_FBA_LP GENMASK(15, 0) 20 #define VCD_CAP_RES 0x800c 21 #define VCD_CAP_RES_VERT_RES GENMASK(10, 0) 24 #define VCD_MODE 0x8014 25 #define VCD_MODE_VCDE BIT(0) 30 #define VCD_CMD 0x8018 [all …]
|
/linux-6.12.1/sound/soc/codecs/ |
D | rt722-sdca-sdw.h | 15 { 0x202d, 0x00 }, 16 { 0x2f01, 0x00 }, 17 { 0x2f02, 0x09 }, 18 { 0x2f03, 0x00 }, 19 { 0x2f04, 0x00 }, 20 { 0x2f05, 0x0b }, 21 { 0x2f06, 0x01 }, 22 { 0x2f08, 0x00 }, 23 { 0x2f09, 0x00 }, 24 { 0x2f0a, 0x00 }, [all …]
|
/linux-6.12.1/arch/powerpc/kernel/ |
D | cpu_setup_6xx.S | 21 li r10,0 83 li r3,0 153 rlwinm r3,r3,0,20,31 154 cmpwi 0,r3,0x0207 160 rlwinm r3,r3,0,20,31 161 cmpwi 0,r3,0x0100 165 /* Errata #3: Set L1OPQ_SIZE to 0x10 */ 166 rlwinm r11,r11,0,9,6 167 oris r11,r11,0x0100 169 oris r11,r11,0x0002 [all …]
|
/linux-6.12.1/include/uapi/linux/ |
D | media-bus-format.h | 16 * These bus formats uniquely identify data formats on the data bus. Format 0 35 #define MEDIA_BUS_FMT_FIXED 0x0001 37 /* RGB - next is 0x1026 */ 38 #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 39 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 40 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 41 #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE 0x1003 42 #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE 0x1004 43 #define MEDIA_BUS_FMT_RGB565_1X16 0x1017 44 #define MEDIA_BUS_FMT_BGR565_2X8_BE 0x1005 [all …]
|
/linux-6.12.1/drivers/iio/chemical/ |
D | sps30_i2c.c | 7 * I2C slave address: 0x69 21 #define SPS30_I2C_CRC8_POLYNOMIAL 0x31 27 #define SPS30_I2C_START_MEAS 0x0010 28 #define SPS30_I2C_STOP_MEAS 0x0104 29 #define SPS30_I2C_READ_MEAS 0x0300 30 #define SPS30_I2C_MEAS_READY 0x0202 31 #define SPS30_I2C_RESET 0xd304 32 #define SPS30_I2C_CLEAN_FAN 0x5607 33 #define SPS30_I2C_PERIOD 0x8004 34 #define SPS30_I2C_READ_SERIAL 0xd033 [all …]
|
/linux-6.12.1/drivers/mmc/host/ |
D | sdhci-bcm-kona.c | 19 #define SDHCI_SOFT_RESET 0x01000000 20 #define KONA_SDHOST_CORECTRL 0x8000 21 #define KONA_SDHOST_CD_PINCTRL 0x00000008 22 #define KONA_SDHOST_STOP_HCLK 0x00000004 23 #define KONA_SDHOST_RESET 0x00000002 24 #define KONA_SDHOST_EN 0x00000001 26 #define KONA_SDHOST_CORESTAT 0x8004 27 #define KONA_SDHOST_WP 0x00000002 28 #define KONA_SDHOST_CD_SW 0x00000001 30 #define KONA_SDHOST_COREIMR 0x8008 [all …]
|
/linux-6.12.1/drivers/net/ethernet/chelsio/cxgb/ |
D | mv88e1xxx.c | 9 #define CROSSOVER_MDI 0 13 #define INTR_ENABLE_MASK 0x6CA0 45 * RETURN: 0 - Successful reset. 62 return ctl ? -1 : 0; in mv88e1xxx_reset() 81 return 0; in mv88e1xxx_interrupt_enable() 87 (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0); in mv88e1xxx_interrupt_disable() 99 return 0; in mv88e1xxx_interrupt_disable() 118 return 0; in mv88e1xxx_interrupt_clear() 130 if (speed >= 0) { in mv88e1xxx_set_speed_duplex() 137 if (duplex >= 0) { in mv88e1xxx_set_speed_duplex() [all …]
|
/linux-6.12.1/drivers/usb/serial/ |
D | safe_serial.c | 35 * 0..N-2 data and optional padding 38 * bits 1-0 top two bits of 10 bit CRC 43 * + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 + 85 module_param(safe, bool, 0); 88 module_param(padded, bool, 0); 91 #define CDC_DEVICE_CLASS 0x02 93 #define CDC_INTERFACE_CLASS 0x02 94 #define CDC_INTERFACE_SUBCLASS 0x06 96 #define LINEO_INTERFACE_CLASS 0xff 98 #define LINEO_INTERFACE_SUBCLASS_SAFENET 0x01 [all …]
|
/linux-6.12.1/drivers/media/usb/dvb-usb/ |
D | dibusb-common.c | 20 #define deb_info(args...) dprintk(debug,0x01,args) 28 if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) { in dibusb_streaming_ctrl() 33 return 0; in dibusb_streaming_ctrl() 42 st->ops.pid_ctrl(adap->fe_adap[0].fe, in dibusb_pid_filter() 45 return 0; in dibusb_pid_filter() 54 if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0) in dibusb_pid_filter_ctrl() 57 return 0; in dibusb_pid_filter_ctrl() 70 b[0] = DIBUSB_REQ_SET_IOCTL; in dibusb_power_ctrl() 93 if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0) in dibusb2_0_streaming_ctrl() 97 b[0] = DIBUSB_REQ_SET_STREAMING_MODE; in dibusb2_0_streaming_ctrl() [all …]
|
/linux-6.12.1/drivers/pci/controller/dwc/ |
D | pcie-uniphier-ep.c | 23 #define PCL_RSTCTRL0 0x0010 27 #define PCL_RSTCTRL_PIPE3 BIT(0) 29 #define PCL_RSTCTRL1 0x0020 30 #define PCL_RSTCTRL_PERST BIT(0) 32 #define PCL_RSTCTRL2 0x0024 33 #define PCL_RSTCTRL_PHY_RESET BIT(0) 35 #define PCL_PINCTRL0 0x002c 41 #define PCL_PERST_OUT_REGVAL BIT(0) 43 #define PCL_PIPEMON 0x0044 46 #define PCL_MODE 0x8000 [all …]
|
/linux-6.12.1/drivers/net/usb/ |
D | zaurus.c | 56 skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags); in zaurus_tx_fixup() 62 fcs = crc32_le(~0, skb->data, skb->len); in zaurus_tx_fixup() 65 skb_put_u8(skb, fcs & 0xff); in zaurus_tx_fixup() 66 skb_put_u8(skb, (fcs >> 8) & 0xff); in zaurus_tx_fixup() 67 skb_put_u8(skb, (fcs >> 16) & 0xff); in zaurus_tx_fixup() 68 skb_put_u8(skb, (fcs >> 24) & 0xff); in zaurus_tx_fixup() 86 return 0; in always_connected() 128 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, 129 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, 132 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70, [all …]
|
/linux-6.12.1/include/linux/mfd/mt6332/ |
D | registers.h | 10 #define MT6332_HWCID 0x8000 11 #define MT6332_SWCID 0x8002 12 #define MT6332_TOP_CON 0x8004 13 #define MT6332_DDR_VREF_AP_CON 0x8006 14 #define MT6332_DDR_VREF_DQ_CON 0x8008 15 #define MT6332_DDR_VREF_CA_CON 0x800A 16 #define MT6332_TEST_OUT 0x800C 17 #define MT6332_TEST_CON0 0x800E 18 #define MT6332_TEST_CON1 0x8010 19 #define MT6332_TESTMODE_SW 0x8012 [all …]
|
/linux-6.12.1/drivers/scsi/ |
D | qlogicpti.h | 11 #define SBUS_CFG1 0x006UL 12 #define SBUS_CTRL 0x008UL 13 #define SBUS_STAT 0x00aUL 14 #define SBUS_SEMAPHORE 0x00cUL 15 #define CMD_DMA_CTRL 0x022UL 16 #define DATA_DMA_CTRL 0x042UL 17 #define MBOX0 0x080UL 18 #define MBOX1 0x082UL 19 #define MBOX2 0x084UL 20 #define MBOX3 0x086UL [all …]
|
/linux-6.12.1/drivers/gpu/drm/xe/abi/ |
D | guc_actions_abi.h | 19 * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | 25 * | | 15:0 | ACTION = _`GUC_ACTION_HOST2GUC_SELF_CFG` = 0x0508 | 29 * | | 15:0 | **KLV_LEN** - KLV length | 34 * | 2 | 31:0 | **VALUE32** - Bits 31-0 of the KLV value | 36 * | 3 | 31:0 | **VALUE64** - Bits 63-32 of the KLV value (**KLV_LEN** = 2) | 42 * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | 46 * | | 27:0 | DATA0 = **NUM** - 1 if KLV was parsed, 0 if not recognized | 49 #define GUC_ACTION_HOST2GUC_SELF_CFG 0x0508 53 #define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_KEY (0xffffu << 16) 54 #define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_LEN (0xffffu << 0) [all …]
|