/linux-6.12.1/Documentation/devicetree/bindings/clock/ |
D | ti,am654-ehrpwm-tbclk.yaml | 37 reg = <0x4140 0x18>;
|
/linux-6.12.1/Documentation/devicetree/bindings/soc/ti/ |
D | ti,j721e-system-controller.yaml | 48 "^mux-controller@[0-9a-f]+$": 53 "^clock-controller@[0-9a-f]+$": 59 "phy@[0-9a-f]+$": 65 "^chipid@[0-9a-f]+$": 84 reg = <0x00100000 0x1c000>; 91 reg = <0x00004080 0x50>; 95 <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ 96 <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ 97 <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ 98 <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nxp/mxs/ |
D | imx28-pinfunc.h | 13 #define MX28_PAD_GPMI_D00__GPMI_D0 0x0000 14 #define MX28_PAD_GPMI_D01__GPMI_D1 0x0010 15 #define MX28_PAD_GPMI_D02__GPMI_D2 0x0020 16 #define MX28_PAD_GPMI_D03__GPMI_D3 0x0030 17 #define MX28_PAD_GPMI_D04__GPMI_D4 0x0040 18 #define MX28_PAD_GPMI_D05__GPMI_D5 0x0050 19 #define MX28_PAD_GPMI_D06__GPMI_D6 0x0060 20 #define MX28_PAD_GPMI_D07__GPMI_D7 0x0070 21 #define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100 22 #define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110 [all …]
|
/linux-6.12.1/drivers/hwmon/pmbus/ |
D | ltc2978.c | 33 #define LTC2978_MFR_VOUT_PEAK 0xdd 34 #define LTC2978_MFR_VIN_PEAK 0xde 35 #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf 36 #define LTC2978_MFR_SPECIAL_ID 0xe7 /* Undocumented on LTC3882 */ 37 #define LTC2978_MFR_COMMON 0xef 40 #define LTC2978_MFR_VOUT_MIN 0xfb 41 #define LTC2978_MFR_VIN_MIN 0xfc 42 #define LTC2978_MFR_TEMPERATURE_MIN 0xfd 45 #define LTC2974_MFR_IOUT_PEAK 0xd7 46 #define LTC2974_MFR_IOUT_MIN 0xd8 [all …]
|
/linux-6.12.1/drivers/clk/imx/ |
D | clk-imx7d.c | 32 { .val = 0, .div = 4, }, 40 { .val = 0, .div = 1, }, 393 hws[IMX7D_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx7d_clocks_init() 398 base = of_iomap(np, 0); in imx7d_clocks_init() 402 …hws[IMX7D_PLL_ARM_MAIN_SRC] = imx_clk_hw_mux("pll_arm_main_src", base + 0x60, 14, 2, pll_bypass_s… in imx7d_clocks_init() 403 …hws[IMX7D_PLL_DRAM_MAIN_SRC] = imx_clk_hw_mux("pll_dram_main_src", base + 0x70, 14, 2, pll_bypass_… in imx7d_clocks_init() 404 …hws[IMX7D_PLL_SYS_MAIN_SRC] = imx_clk_hw_mux("pll_sys_main_src", base + 0xb0, 14, 2, pll_bypass_s… in imx7d_clocks_init() 405 …hws[IMX7D_PLL_ENET_MAIN_SRC] = imx_clk_hw_mux("pll_enet_main_src", base + 0xe0, 14, 2, pll_bypass_… in imx7d_clocks_init() 406 …hws[IMX7D_PLL_AUDIO_MAIN_SRC] = imx_clk_hw_mux("pll_audio_main_src", base + 0xf0, 14, 2, pll_bypas… in imx7d_clocks_init() 407 …hws[IMX7D_PLL_VIDEO_MAIN_SRC] = imx_clk_hw_mux("pll_video_main_src", base + 0x130, 14, 2, pll_bypa… in imx7d_clocks_init() [all …]
|
D | clk-imx8mn.c | 334 hws[IMX8MN_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx8mn_clocks_probe() 343 base = devm_of_iomap(dev, np, 0, NULL); in imx8mn_clocks_probe() 350 …hws[IMX8MN_AUDIO_PLL1_REF_SEL] = imx_clk_hw_mux("audio_pll1_ref_sel", base + 0x0, 0, 2, pll_ref_se… in imx8mn_clocks_probe() 351 …hws[IMX8MN_AUDIO_PLL2_REF_SEL] = imx_clk_hw_mux("audio_pll2_ref_sel", base + 0x14, 0, 2, pll_ref_s… in imx8mn_clocks_probe() 352 …hws[IMX8MN_VIDEO_PLL_REF_SEL] = imx_clk_hw_mux("video_pll_ref_sel", base + 0x28, 0, 2, pll_ref_sel… in imx8mn_clocks_probe() 353 …hws[IMX8MN_DRAM_PLL_REF_SEL] = imx_clk_hw_mux("dram_pll_ref_sel", base + 0x50, 0, 2, pll_ref_sels,… in imx8mn_clocks_probe() 354 …hws[IMX8MN_GPU_PLL_REF_SEL] = imx_clk_hw_mux("gpu_pll_ref_sel", base + 0x64, 0, 2, pll_ref_sels, A… in imx8mn_clocks_probe() 355 …hws[IMX8MN_M7_ALT_PLL_REF_SEL] = imx_clk_hw_mux("m7_alt_pll_ref_sel", base + 0x74, 0, 2, pll_ref_s… in imx8mn_clocks_probe() 356 …hws[IMX8MN_ARM_PLL_REF_SEL] = imx_clk_hw_mux("arm_pll_ref_sel", base + 0x84, 0, 2, pll_ref_sels, A… in imx8mn_clocks_probe() 357 …hws[IMX8MN_SYS_PLL3_REF_SEL] = imx_clk_hw_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels… in imx8mn_clocks_probe() [all …]
|
D | clk-imx8mp.c | 416 anatop_base = devm_of_iomap(dev, np, 0, NULL); in imx8mp_clocks_probe() 422 ccm_base = devm_platform_ioremap_resource(pdev, 0); in imx8mp_clocks_probe() 433 hws[IMX8MP_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx8mp_clocks_probe() 441 …hws[IMX8MP_AUDIO_PLL1_REF_SEL] = imx_clk_hw_mux("audio_pll1_ref_sel", anatop_base + 0x0, 0, 2, pll… in imx8mp_clocks_probe() 442 …hws[IMX8MP_AUDIO_PLL2_REF_SEL] = imx_clk_hw_mux("audio_pll2_ref_sel", anatop_base + 0x14, 0, 2, pl… in imx8mp_clocks_probe() 443 …hws[IMX8MP_VIDEO_PLL1_REF_SEL] = imx_clk_hw_mux("video_pll1_ref_sel", anatop_base + 0x28, 0, 2, pl… in imx8mp_clocks_probe() 444 …hws[IMX8MP_DRAM_PLL_REF_SEL] = imx_clk_hw_mux("dram_pll_ref_sel", anatop_base + 0x50, 0, 2, pll_re… in imx8mp_clocks_probe() 445 …hws[IMX8MP_GPU_PLL_REF_SEL] = imx_clk_hw_mux("gpu_pll_ref_sel", anatop_base + 0x64, 0, 2, pll_ref_… in imx8mp_clocks_probe() 446 …hws[IMX8MP_VPU_PLL_REF_SEL] = imx_clk_hw_mux("vpu_pll_ref_sel", anatop_base + 0x74, 0, 2, pll_ref_… in imx8mp_clocks_probe() 447 …hws[IMX8MP_ARM_PLL_REF_SEL] = imx_clk_hw_mux("arm_pll_ref_sel", anatop_base + 0x84, 0, 2, pll_ref_… in imx8mp_clocks_probe() [all …]
|
/linux-6.12.1/drivers/net/ethernet/renesas/ |
D | rswitch.h | 17 for (i = 0; i < RSWITCH_NUM_PORTS; i++) \ 23 for (; i-- > 0; ) \ 44 #define RSWITCH_TOP_OFFSET 0x00008000 45 #define RSWITCH_COMA_OFFSET 0x00009000 46 #define RSWITCH_ETHA_OFFSET 0x0000a000 /* with RMAC */ 47 #define RSWITCH_ETHA_SIZE 0x00002000 /* with RMAC */ 48 #define RSWITCH_GWCA0_OFFSET 0x00010000 49 #define RSWITCH_GWCA1_OFFSET 0x00012000 55 #define GWCA_INDEX 0 57 #define GWCA_IPV_NUM 0 [all …]
|
/linux-6.12.1/drivers/ata/ |
D | libata-pmp.c | 36 * 0 on success, AC_ERR_* mask on failure. 52 err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, in sata_pmp_read() 58 return 0; in sata_pmp_read() 73 * 0 on success, AC_ERR_* mask on failure. 87 tf.nsect = val & 0xff; in sata_pmp_write() 88 tf.lbal = (val >> 8) & 0xff; in sata_pmp_write() 89 tf.lbam = (val >> 16) & 0xff; in sata_pmp_write() 90 tf.lbah = (val >> 24) & 0xff; in sata_pmp_write() 92 return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, in sata_pmp_write() 107 * ATA_DEFER_* if deferring is needed, 0 otherwise. [all …]
|
D | sata_sil24.c | 47 SIL24_HOST_BAR = 0, 69 HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ 70 HOST_CTRL = 0x40, 71 HOST_IRQ_STAT = 0x44, 72 HOST_PHY_CFG = 0x48, 73 HOST_BIST_CTRL = 0x50, 74 HOST_BIST_PTRN = 0x54, 75 HOST_BIST_STAT = 0x58, 76 HOST_MEM_BIST_STAT = 0x5c, 77 HOST_FLASH_CMD = 0x70, [all …]
|
/linux-6.12.1/drivers/net/ethernet/marvell/octeontx2/af/ |
D | rvu_reg.h | 12 #define RVU_AF_MSIXTR_BASE (0x10) 13 #define RVU_AF_ECO (0x20) 14 #define RVU_AF_BLK_RST (0x30) 15 #define RVU_AF_PF_BAR4_ADDR (0x40) 16 #define RVU_AF_RAS (0x100) 17 #define RVU_AF_RAS_W1S (0x108) 18 #define RVU_AF_RAS_ENA_W1S (0x110) 19 #define RVU_AF_RAS_ENA_W1C (0x118) 20 #define RVU_AF_GEN_INT (0x120) 21 #define RVU_AF_GEN_INT_W1S (0x128) [all …]
|
/linux-6.12.1/drivers/phy/rockchip/ |
D | phy-rockchip-typec.c | 58 #define CMN_SSM_BANDGAP (0x21 << 2) 59 #define CMN_SSM_BIAS (0x22 << 2) 60 #define CMN_PLLSM0_PLLEN (0x29 << 2) 61 #define CMN_PLLSM0_PLLPRE (0x2a << 2) 62 #define CMN_PLLSM0_PLLVREF (0x2b << 2) 63 #define CMN_PLLSM0_PLLLOCK (0x2c << 2) 64 #define CMN_PLLSM1_PLLEN (0x31 << 2) 65 #define CMN_PLLSM1_PLLPRE (0x32 << 2) 66 #define CMN_PLLSM1_PLLVREF (0x33 << 2) 67 #define CMN_PLLSM1_PLLLOCK (0x34 << 2) [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/dpcs/ |
D | dpcs_3_1_4_offset.h | 31 // base address: 0x0 32 …DPCSSYS_CR0_SUP_DIG_IDCODE_LO 0x0000 33 …DPCSSYS_CR0_SUP_DIG_IDCODE_HI 0x0001 34 …DPCSSYS_CR0_SUP_DIG_REFCLK_OVRD_IN 0x0002 35 …DPCSSYS_CR0_SUP_DIG_MPLLA_DIV_CLK_OVRD_IN 0x0003 36 …DPCSSYS_CR0_SUP_DIG_MPLLA_HDMI_CLK_OVRD_IN 0x0004 37 …DPCSSYS_CR0_SUP_DIG_MPLLB_DIV_CLK_OVRD_IN 0x0005 38 …DPCSSYS_CR0_SUP_DIG_MPLLB_HDMI_CLK_OVRD_IN 0x0006 39 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_0 0x0007 40 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_1 0x0008 [all …]
|
D | dpcs_4_2_0_offset.h | 27 // base address: 0x0 28 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934 30 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935 35 // base address: 0x360 36 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c 38 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d 43 // base address: 0x6c0 44 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4 46 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5 51 // base address: 0xa20 [all …]
|
D | dpcs_4_2_2_offset.h | 14 // base address: 0x0 15 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934 17 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935 22 // base address: 0x360 23 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c 25 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d 30 // base address: 0x6c0 31 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4 33 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5 38 // base address: 0xa20 [all …]
|
D | dpcs_4_2_3_offset.h | 31 // base address: 0x0 32 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934 34 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935 39 // base address: 0x360 40 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c 42 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d 47 // base address: 0x6c0 48 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4 50 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5 55 // base address: 0xa20 [all …]
|
/linux-6.12.1/drivers/net/ethernet/intel/igb/ |
D | igb_ethtool.c | 112 TEST_REG = 0, 129 #define IGB_PRIV_FLAGS_LEGACY_RX BIT(0) 147 0 : rd32(E1000_STATUS); in igb_get_link_ksettings() 240 /* MDI-X => 2; MDI =>1; Invalid =>0 */ in igb_get_link_ksettings() 257 return 0; in igb_get_link_ksettings() 338 /* fix up the value for auto (3 => 0) as zero is mapped in igb_set_link_ksettings() 355 return 0; in igb_set_link_ksettings() 399 int retval = 0; in igb_set_pauseparam() 435 for (i = 0; i < adapter->num_rx_queues; i++) { in igb_set_pauseparam() 472 memset(p, 0, IGB_REGS_LEN * sizeof(u32)); in igb_get_regs() [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/ti/ |
D | k3-am65-main.dtsi | 12 reg = <0x0 0x70000000 0x0 0x200000>; 15 ranges = <0x0 0x0 0x70000000 0x200000>; 17 atf-sram@0 { 18 reg = <0x0 0x20000>; 22 reg = <0xf0000 0x10000>; 26 reg = <0x100000 0x100000>; 37 reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ 38 <0x00 0x01880000 0x00 0x90000>, /* GICR */ 39 <0x00 0x6f000000 0x00 0x2000>, /* GICC */ 40 <0x00 0x6f010000 0x00 0x1000>, /* GICH */ [all …]
|
D | k3-j721e-main.dtsi | 15 #clock-cells = <0>; 17 clock-frequency = <0>; 21 #clock-cells = <0>; 23 clock-frequency = <0>; 30 reg = <0x0 0x70000000 0x0 0x800000>; 33 ranges = <0x0 0x0 0x70000000 0x800000>; 35 atf-sram@0 { 36 reg = <0x0 0x20000>; 42 reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */ 45 ranges = <0x0 0x0 0x00100000 0x1c000>; [all …]
|
D | k3-j784s4-main.dtsi | 16 #clock-cells = <0>; 26 reg = <0x00 0x70000000 0x00 0x800000>; 29 ranges = <0x00 0x00 0x70000000 0x800000>; 31 atf-sram@0 { 32 reg = <0x00 0x20000>; 36 reg = <0x1f0000 0x10000>; 40 reg = <0x200000 0x200000>; 46 reg = <0x00 0x00100000 0x00 0x1c000>; 49 ranges = <0x00 0x00 0x00100000 0x1c000>; 53 reg = <0x4034 0x4>; [all …]
|
/linux-6.12.1/drivers/net/ethernet/intel/e1000/ |
D | e1000_ethtool.c | 20 sizeof(((struct e1000_adapter *)0)->m), \ 23 sizeof(((struct net_device *)0)->m), \ 75 #define E1000_QUEUE_STATS_LEN 0 143 /* MDI-X => 1; MDI => 0 */ in e1000_get_link_ksettings() 161 return 0; in e1000_get_link_ksettings() 228 return 0; in e1000_set_link_ksettings() 271 int retval = 0; in e1000_set_pauseparam() 332 memset(p, 0, E1000_REGS_LEN * sizeof(u32)); in e1000_get_regs() 336 regs_buff[0] = er32(CTRL); in e1000_get_regs() 351 regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */ in e1000_get_regs() [all …]
|
/linux-6.12.1/drivers/mtd/nand/raw/ |
D | sunxi_nand.c | 32 #define NFC_REG_CTL 0x0000 33 #define NFC_REG_ST 0x0004 34 #define NFC_REG_INT 0x0008 35 #define NFC_REG_TIMING_CTL 0x000C 36 #define NFC_REG_TIMING_CFG 0x0010 37 #define NFC_REG_ADDR_LOW 0x0014 38 #define NFC_REG_ADDR_HIGH 0x0018 39 #define NFC_REG_SECTOR_NUM 0x001C 40 #define NFC_REG_CNT 0x0020 41 #define NFC_REG_CMD 0x0024 [all …]
|
/linux-6.12.1/drivers/net/ethernet/intel/e1000e/ |
D | ethtool.c | 27 #define E1000E_PRIV_FLAGS_S0IX_ENABLED BIT(0) 36 .sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \ 41 .sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \ 181 /* MDI-X => 2; MDI =>1; Invalid =>0 */ in e1000_get_link_ksettings() 208 return 0; in e1000_get_link_ksettings() 215 mac->autoneg = 0; in e1000_set_spd_dplx() 259 return 0; in e1000_set_spd_dplx() 271 int ret_val = 0; in e1000_set_link_ksettings() 326 /* fix up the value for auto (3 => 0) as zero is mapped in e1000_set_link_ksettings() 372 int retval = 0; in e1000_set_pauseparam() [all …]
|
/linux-6.12.1/sound/soc/mediatek/mt8195/ |
D | mt8195-reg.h | 13 #define AFE_SRAM_BASE (0x10880000) 14 #define AFE_SRAM_SIZE (0x10000) 16 #define AUDIO_TOP_CON0 (0x0000) 17 #define AUDIO_TOP_CON1 (0x0004) 18 #define AUDIO_TOP_CON2 (0x0008) 19 #define AUDIO_TOP_CON3 (0x000c) 20 #define AUDIO_TOP_CON4 (0x0010) 21 #define AUDIO_TOP_CON5 (0x0014) 22 #define AUDIO_TOP_CON6 (0x0018) 23 #define AFE_MAS_HADDR_MSB (0x0020) [all …]
|
/linux-6.12.1/sound/soc/mediatek/mt8188/ |
D | mt8188-reg.h | 14 #define AUDIO_TOP_CON0 (0x0000) 15 #define AUDIO_TOP_CON1 (0x0004) 16 #define AUDIO_TOP_CON2 (0x0008) 17 #define AUDIO_TOP_CON3 (0x000c) 18 #define AUDIO_TOP_CON4 (0x0010) 19 #define AUDIO_TOP_CON5 (0x0014) 20 #define AUDIO_TOP_CON6 (0x0018) 21 #define AFE_MAS_HADDR_MSB (0x0020) 22 #define AFE_MEMIF_ONE_HEART (0x0024) 23 #define AFE_MUX_SEL_CFG (0x0044) [all …]
|