/linux-6.12.1/arch/powerpc/boot/dts/fsl/ |
D | qoriq-usb2-mph-0.dtsi | 2 * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ] 37 reg = <0x210000 0x1000>; 39 #size-cells = <0>; 40 interrupts = <44 0x2 0 0>;
|
D | qonverge-usb2-dr-0.dtsi | 2 * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ] 37 reg = <0x210000 0x1000>; 39 #size-cells = <0>; 40 interrupts = <44 0x2 0 0>;
|
/linux-6.12.1/drivers/rtc/ |
D | rtc-gamecube.c | 12 * This device sits on a bus named EXI (which is similar to SPI), channel 0, 40 #define EXICSR 0 45 #define EXICSR_DEV 0x380 46 #define EXICSR_DEV1 0x100 47 #define EXICSR_CLK 0x070 48 #define EXICSR_CLK_1MHZ 0x000 49 #define EXICSR_CLK_2MHZ 0x010 50 #define EXICSR_CLK_4MHZ 0x020 51 #define EXICSR_CLK_8MHZ 0x030 52 #define EXICSR_CLK_16MHZ 0x040 [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/dma/ |
D | nvidia,tegra186-gpc-dma.yaml | 78 reg = <0x2600000 0x210000>; 115 dma-channel-mask = <0xfffffffe>;
|
/linux-6.12.1/drivers/media/pci/intel/ipu6/ |
D | ipu6-platform-regs.h | 11 * locates in one single space starts from 0 but in different sctions with 12 * different addresses, the subsystem offsets are defined to 0 as the 13 * register definition will have the address offset to 0. 15 #define IPU6_UNIFIED_OFFSET 0 17 #define IPU6_ISYS_IOMMU0_OFFSET 0x2e0000 18 #define IPU6_ISYS_IOMMU1_OFFSET 0x2e0500 19 #define IPU6_ISYS_IOMMUI_OFFSET 0x2e0a00 21 #define IPU6_PSYS_IOMMU0_OFFSET 0x1b0000 22 #define IPU6_PSYS_IOMMU1_OFFSET 0x1b0700 23 #define IPU6_PSYS_IOMMU1R_OFFSET 0x1b0e00 [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/marvell/ |
D | armada-3720-db.dts | 27 memory@0 { 29 reg = <0x00000000 0x00000000 0x00000000 0x20000000>; 55 gpios-states = <0>; 56 states = <1800000 0x1 57 3300000 0x0>; 72 /* Gigabit module on CON19(V2.0)/CON21(V1.4) */ 75 pinctrl-0 = <&rgmii_pins>; 81 /* Gigabit module on CON18(V2.0)/CON20(V1.4) */ 90 pinctrl-0 = <&i2c1_pins>; 98 reg = <0x22>; [all …]
|
D | armada-ap80x.dtsi | 41 reg = <0x0 0x4000000 0x0 0x200000>; 46 reg = <0 0x4400000 0 0x1000000>; 62 ranges = <0x0 0x0 0xf0000000 0x1000000>; 66 reg = <0x100000 0x100000>; 90 reg = <0x210000 0x10000>, 91 <0x220000 0x20000>, 92 <0x240000 0x20000>, 93 <0x260000 0x20000>; 98 reg = <0x280000 0x1000>; 105 reg = <0x290000 0x1000>; [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/freescale/ |
D | imx8qm-ss-dma.dtsi | 10 reg = <0x5a4a0000 0x10000>; 22 reg = <0x5a840000 0x4000>; 25 clocks = <&i2c4_lpcg 0>, 36 reg = <0x5ac40000 0x10000>; 48 reg = <0x5ace0000 0x10000>; 61 reg = <0x5acf0000 0x10000>; 74 reg = <0x5a1f0000 0x170000>; 77 dma-channel-mask = <0xf00>; 86 <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ 87 <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */ [all …]
|
D | fsl-ls1028a-kontron-sl28.dts | 85 reg = <0x5>; 95 nvmem-cells = <&base_mac_address 0>; 118 flash@0 { 122 reg = <0>; 132 partition@0 { 133 reg = <0x000000 0x010000>; 139 reg = <0x010000 0x1d0000>; 145 reg = <0x200000 0x010000>; 150 reg = <0x210000 0x1d0000>; 155 reg = <0x3e0000 0x020000>; [all …]
|
D | imx95.dtsi | 23 #size-cells = <0>; 25 A55_0: cpu@0 { 28 reg = <0x0>; 45 reg = <0x100>; 62 reg = <0x200>; 79 reg = <0x300>; 96 reg = <0x400>; 113 reg = <0x500>; 227 #clock-cells = <0>; 228 clock-frequency = <0>; [all …]
|
D | imx93.dtsi | 49 #size-cells = <0>; 56 arm,psci-suspend-param = <0x0010033>; 65 A55_0: cpu@0 { 68 reg = <0x0>; 84 reg = <0x100>; 129 #clock-cells = <0>; 136 #clock-cells = <0>; 143 #clock-cells = <0>; 171 reg = <0 0x48000000 0 0x10000>, 172 <0 0x48040000 0 0xc0000>; [all …]
|
/linux-6.12.1/drivers/net/ethernet/cavium/thunder/ |
D | nic_reg.h | 13 #define NIC_PF_CFG (0x0000) 14 #define NIC_PF_STATUS (0x0010) 15 #define NIC_PF_INTR_TIMER_CFG (0x0030) 16 #define NIC_PF_BIST_STATUS (0x0040) 17 #define NIC_PF_SOFT_RESET (0x0050) 18 #define NIC_PF_TCP_TIMER (0x0060) 19 #define NIC_PF_BP_CFG (0x0080) 20 #define NIC_PF_RRM_CFG (0x0088) 21 #define NIC_PF_CQM_CFG (0x00A0) 22 #define NIC_PF_CNM_CF (0x00A8) [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/arm/ |
D | rtsm_ve-motherboard.dtsi | 13 #clock-cells = <0>; 20 #clock-cells = <0>; 27 #clock-cells = <0>; 49 #clock-cells = <0>; 55 arm,vexpress-sysreg,func = <5 0>; 60 arm,vexpress-sysreg,func = <7 0>; 65 arm,vexpress-sysreg,func = <8 0>; 70 arm,vexpress-sysreg,func = <9 0>; 75 arm,vexpress-sysreg,func = <11 0>; 83 ranges = <0 0x8000000 0 0x8000000 0x18000000>; [all …]
|
/linux-6.12.1/arch/mips/include/asm/sn/sn0/ |
D | hubmd.h | 29 #define MD_BASE 0x200000 30 #define MD_BASE_PERF 0x210000 31 #define MD_BASE_JUNK 0x220000 33 #define MD_IO_PROTECT 0x200000 /* MD and core register protection */ 34 #define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ 35 #define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ 36 #define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ 37 #define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ 38 #define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ 39 #define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ [all …]
|
/linux-6.12.1/arch/arm/boot/dts/microchip/ |
D | sama5d2.dtsi | 29 #size-cells = <0>; 31 cpu@0 { 34 reg = <0>; 41 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>; 46 reg = <0x740000 0x1000>; 62 reg = <0x73c000 0x1000>; 78 reg = <0x20000000 0x20000000>; 84 #clock-cells = <0>; 85 clock-frequency = <0>; 90 #clock-cells = <0>; [all …]
|
/linux-6.12.1/drivers/net/wireless/intel/ipw2x00/ |
D | ipw2100.c | 176 static int debug = 0; 177 static int network_mode = 0; 178 static int channel = 0; 179 static int associate = 0; 180 static int disable = 0; 193 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); 196 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); 207 } while (0) 209 #define IPW_DEBUG(level, message...) do {} while (0) 333 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val); in read_register() [all …]
|
/linux-6.12.1/tools/testing/selftests/kvm/aarch64/ |
D | vgic_init.c | 21 #define GICR_TYPER 0x8 55 TEST_ASSERT(val == want, "%s; want '0x%x', got '0x%x'", msg, want, val); in v3_redist_reg_get() 61 GUEST_SYNC(0); in guest_code() 70 return __vcpu_run(vcpu) ? -errno : 0; in run_vcpu() 112 .size = 0x10000, 113 .alignment = 0x10000, 118 .size = NR_VCPUS * 0x20000, 119 .alignment = 0x10000, 124 .size = 0x1000, 125 .alignment = 0x1000, [all …]
|
/linux-6.12.1/drivers/phy/microchip/ |
D | sparx5_serdes.c | 31 #define SPX5_SERDES_QUIET_MODE_VAL 0x01ef4e0c 34 SPX5_SD10G28_CMU_MAIN = 0, 353 .cfg_en_adv = 0, 355 .cfg_en_dly = 0, 356 .cfg_tap_adv_3_0 = 0, 358 .cfg_tap_dly_4_0 = 0, 359 .cfg_eq_c_force_3_0 = 0xf, 368 .cfg_tap_adv_3_0 = 0, 370 .cfg_tap_dly_4_0 = 0x10, 371 .cfg_eq_c_force_3_0 = 0xf, [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/amdgpu/ |
D | cik.c | 82 .max_level = 0, 143 return 0; in cik_query_video_codecs() 205 WREG32(mmUVD_CTX_INDEX, ((reg) & 0x1ff)); in cik_uvd_ctx_rreg() 216 WREG32(mmUVD_CTX_INDEX, ((reg) & 0x1ff)); in cik_uvd_ctx_wreg() 245 0xc200, 0xe0ffffff, 0xe0000000 250 0x31dc, 0xffffffff, 0x00000800, 251 0x31dd, 0xffffffff, 0x00000800, 252 0x31e6, 0xffffffff, 0x00007fbf, 253 0x31e7, 0xffffffff, 0x00007faf 258 0xcd5, 0x00000333, 0x00000333, [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/nvidia/ |
D | tegra186.dtsi | 20 reg = <0x0 0x00100000 0x0 0xf000>, 21 <0x0 0x0010f000 0x0 0x1000>; 27 reg = <0x0 0x2200000 0x0 0x10000>, 28 <0x0 0x2210000 0x0 0x10000>; 44 reg = <0x0 0x02490000 0x0 0x10000>; 71 snps,burst-map = <0x7>; 78 reg = <0x0 0x2600000 0x0 0x210000>; 116 dma-channel-mask = <0xfffffffe>; 129 ranges = <0x02900000 0x0 0x02900000 0x200000>; 134 reg = <0x02900800 0x800>; [all …]
|
D | tegra194.dtsi | 20 bus@0 { 25 ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; 29 reg = <0x0 0x00100000 0x0 0xf000>, 30 <0x0 0x0010f000 0x0 0x1000>; 36 reg = <0x0 0x2200000 0x0 0x10000>, 37 <0x0 0x2210000 0x0 0x10000>; 90 gpio-ranges = <&pinmux 0 0 169>; 95 reg = <0x0 0x02300000 0x0 0x1000>; 105 reg = <0x0 0x2390000 0x0 0x1000>, 106 <0x0 0x23a0000 0x0 0x1000>, [all …]
|
D | tegra234.dtsi | 19 bus@0 { 24 ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; 28 reg = <0x0 0x00100000 0x0 0xf000>, 29 <0x0 0x0010f000 0x0 0x1000>; 35 reg = <0x0 0x02080000 0x0 0x00121000>; 36 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, 58 reg = <0x0 0x02200000 0x0 0x10000>, 59 <0x0 0x02210000 0x0 0x10000>; 112 gpio-ranges = <&pinmux 0 0 164>; 117 reg = <0x0 0x2430000 0x0 0x19100>; [all …]
|
/linux-6.12.1/arch/mips/cavium-octeon/ |
D | octeon-irq.c | 58 #define CIU3_CONST 0x220 59 #define CIU3_IDT_CTL(_idt) ((_idt) * 8 + 0x110000) 60 #define CIU3_IDT_PP(_idt, _idx) ((_idt) * 32 + (_idx) * 8 + 0x120000) 61 #define CIU3_IDT_IO(_idt) ((_idt) * 8 + 0x130000) 62 #define CIU3_DEST_PP_INT(_pp_ip) ((_pp_ip) * 8 + 0x200000) 63 #define CIU3_DEST_IO_INT(_io) ((_io) * 8 + 0x210000) 64 #define CIU3_ISC_CTL(_intsn) ((_intsn) * 8 + 0x80000000) 65 #define CIU3_ISC_W1C(_intsn) ((_intsn) * 8 + 0x90000000) 66 #define CIU3_ISC_W1S(_intsn) ((_intsn) * 8 + 0xa0000000) 115 return 0; in octeon_irq_set_ciu_mapping() [all …]
|
/linux-6.12.1/drivers/ptp/ |
D | ptp_ocp.c | 28 #define PCI_VENDOR_ID_FACEBOOK 0x1d9b 29 #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 31 #define PCI_VENDOR_ID_CELESTICA 0x18d4 32 #define PCI_DEVICE_ID_CELESTICA_TIMECARD 0x1008 34 #define PCI_VENDOR_ID_OROLIA 0x1ad7 35 #define PCI_DEVICE_ID_OROLIA_ARTCARD 0xa000 37 #define PCI_VENDOR_ID_ADVA 0xad5a 38 #define PCI_DEVICE_ID_ADVA_TIMECARD 0x0400 76 #define OCP_CTRL_ENABLE BIT(0) 84 #define OCP_STATUS_IN_SYNC BIT(0) [all …]
|
/linux-6.12.1/drivers/gpu/drm/radeon/ |
D | cik.c | 150 * Returns 0 for success or -EINVAL for an invalid register 170 return 0; in cik_get_allowed_info_register() 205 int actual_temp = 0; in ci_get_temp() 210 if (temp & 0x200) in ci_get_temp() 213 actual_temp = temp & 0x1ff; in ci_get_temp() 222 int actual_temp = 0; in kv_get_temp() 224 temp = RREG32_SMC(0xC0300E0C); in kv_get_temp() 229 actual_temp = 0; in kv_get_temp() 264 (0x0e00 << 16) | (0xc12c >> 2), 265 0x00000000, [all …]
|