/linux-6.12.1/Documentation/devicetree/bindings/pwm/ |
D | microchip,corepwm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Conor Dooley <conor.dooley@microchip.com> 16 https://www.microsemi.com/existing-parts/parts/152118 19 - $ref: pwm.yaml# 24 - const: microchip,corepwm-rtl-v4 32 "#pwm-cells": 37 microchip,sync-update-mask: [all …]
|
D | img-pwm.txt | 1 *Imagination Technologies PWM DAC driver 4 - compatible: Should be "img,pistachio-pwm" 5 - reg: Should contain physical base address and length of pwm registers. 6 - clocks: Must contain an entry for each entry in clock-names. 7 See ../clock/clock-bindings.txt for details. 8 - clock-names: Must include the following entries. 9 - pwm: PWM operating clock. 10 - sys: PWM system interface clock. 11 - #pwm-cells: Should be 2. See pwm.yaml in this directory for the 13 - img,cr-periph: Must contain a phandle to the peripheral control [all …]
|
/linux-6.12.1/arch/arm/boot/dts/st/ |
D | stm32f429.dtsi | 2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> 4 * This file is dual-licensed: you can use it either under the terms 22 * MA 02110-1301 USA 48 #include "../armv7-m.dtsi" 49 #include <dt-bindings/clock/stm32fx-clock.h> 50 #include <dt-bindings/mfd/stm32f4-rcc.h> 53 #address-cells = <1>; 54 #size-cells = <1>; 57 clk_hse: clk-hse { 58 #clock-cells = <0>; [all …]
|
D | stm32h743.dtsi | 2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> 4 * This file is dual-licensed: you can use it either under the terms 43 #include "../armv7-m.dtsi" 44 #include <dt-bindings/clock/stm32h7-clks.h> 45 #include <dt-bindings/mfd/stm32h7-rcc.h> 46 #include <dt-bindings/interrupt-controller/irq.h> 49 #address-cells = <1>; 50 #size-cells = <1>; 53 clk_hse: clk-hse { 54 #clock-cells = <0>; [all …]
|
D | stm32mp151.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/stm32mp1-clks.h> 8 #include <dt-bindings/reset/stm32mp1-resets.h> 11 #address-cells = <1>; 12 #size-cells = <1>; 15 #address-cells = <1>; 16 #size-cells = <0>; 19 compatible = "arm,cortex-a7"; [all …]
|
D | stm32mp157c-emstamp-argon.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 9 #include "stm32mp15-pinctrl.dtsi" 10 #include "stm32mp15xxac-pinctrl.dtsi" 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/mfd/st,stpmic1.h> 23 stdout-path = "serial0:115200n8"; 31 reserved-memory { 32 #address-cells = <1>; 33 #size-cells = <1>; 37 compatible = "shared-dma-pool"; [all …]
|
D | stm32mp15xx-dhcom-picoitx.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause 6 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/pwm/pwm.h> 17 stdout-path = "serial0:115200n8"; 21 compatible = "gpio-leds"; 23 led-0 { 26 default-state = "off"; 35 &dac { 50 usb-port-power-hog { 51 gpio-hog; [all …]
|
D | stm32mp15xx-dhcom-drc02.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause 6 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/pwm/pwm.h> 17 stdout-path = "serial0:115200n8"; 25 &dac { 36 rs485-rx-en-hog { 37 gpio-hog; 39 output-low; 40 line-name = "rs485-rx-en"; 45 gpio-line-names = "", "", "", "", [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/sound/ |
D | starfive,jh7110-pwmdac.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/sound/starfive,jh7110-pwmdac.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: StarFive JH7110 PWM-DAC Controller 10 The PWM-DAC Controller uses PWM square wave generators plus RC filters to 11 form a DAC for audio play in StarFive JH7110 SoC. This audio play controller 16 - Hal Feng <hal.feng@starfivetech.com> 19 - $ref: dai-common.yaml# 23 const: starfive,jh7110-pwmdac [all …]
|
D | axentia,tse850-pcm5142.txt | 1 Devicetree bindings for the Axentia TSE-850 audio complex 4 - compatible: "axentia,tse850-pcm5142" 5 - axentia,cpu-dai: The phandle of the cpu dai. 6 - axentia,audio-codec: The phandle of the PCM5142 codec. 7 - axentia,add-gpios: gpio specifier that controls the mixer. 8 - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1. 9 - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2. 10 - axentia,ana-supply: Regulator that supplies the output amplifier. Must 11 support voltages in the 2V - 20V range, in 1V steps. 16 IN1 +---o +------------+ o---+ OUT1 [all …]
|
/linux-6.12.1/Documentation/hwmon/ |
D | adm1026.rst | 16 - Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing 17 - Justin Thiessen <jthiessen@penguincomputing.com> 20 ----------------- 23 List of GPIO pins (0-16) to program as inputs 26 List of GPIO pins (0-16) to program as outputs 29 List of GPIO pins (0-16) to program as inverted 32 List of GPIO pins (0-16) to program as normal/non-inverted 35 List of GPIO pins (0-7) to program as fan tachs 39 ----------- 45 16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit), [all …]
|
/linux-6.12.1/sound/soc/starfive/ |
D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 11 tristate "JH7110 PWM-DAC device driver" 17 PWM-DAC driver.
|
/linux-6.12.1/arch/arm/boot/dts/microchip/ |
D | at91-tse850-3.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board 9 /dts-v1/; 10 #include <dt-bindings/pwm/pwm.h> 11 #include "at91-linea.dtsi" 14 model = "Axentia TSE-850 3.0"; 19 compatible = "fixed-clock"; 21 #clock-cells = <0>; 22 clock-frequency = <16000000>; 23 clock-output-names = "sck"; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/mfd/ |
D | st,stm32-lptimer.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectronics STM32 Low-Power Timers 10 The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several 12 - PWM output (with programmable prescaler, configurable polarity) 13 - Trigger source for STM32 ADC/DAC (LPTIM_OUT) 14 - Several counter modes: 15 - quadrature encoder to detect angular position and direction of rotary [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nxp/vf/ |
D | vfxxx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 5 #include "vf610-pinfunc.h" 6 #include <dt-bindings/clock/vf610-clock.h> 7 #include <dt-bindings/interrupt-controller/irq.h> 8 #include <dt-bindings/gpio/gpio.h> 32 compatible = "fixed-clock"; 33 #clock-cells = <0>; 34 clock-frequency = <24000000>; 38 compatible = "fixed-clock"; 39 #clock-cells = <0>; [all …]
|
/linux-6.12.1/drivers/hwmon/ |
D | max6650.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * max6650.c - Part of lm_sensors, Linux kernel modules for hardware 18 * http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf 27 #include <linux/hwmon-sysfs.h> 91 /* Minimum and maximum values of the FAN-RPM */ 114 u8 dac; member 140 static int dac_to_pwm(int dac, bool v12) in dac_to_pwm() argument 143 * Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans. in dac_to_pwm() 144 * Lower DAC values mean higher speeds. in dac_to_pwm() 146 return clamp_val(255 - (255 * dac) / DAC_LIMIT(v12), 0, 255); in dac_to_pwm() [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/allwinner/ |
D | sun50i-a64-teres-i.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 3 // based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> 5 /dts-v1/; 7 #include "sun50i-a64.dtsi" 8 #include "sun50i-a64-cpu-opp.dtsi" 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/pwm/pwm.h> 15 model = "Olimex A64 Teres-I"; 16 compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; [all …]
|
D | sun50i-a64-pinebook.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 5 /dts-v1/; 7 #include "sun50i-a64.dtsi" 8 #include "sun50i-a64-cpu-opp.dtsi" 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/gpio-keys.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/pwm/pwm.h> 17 compatible = "pine64,pinebook", "allwinner,sun50i-a64"; 18 chassis-type = "laptop"; [all …]
|
D | sun50i-a64-pinetab.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include "sun50i-a64.dtsi" 10 #include "sun50i-a64-cpu-opp.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/input/input.h> 14 #include <dt-bindings/pwm/pwm.h> 18 compatible = "pine64,pinetab", "allwinner,sun50i-a64"; 19 chassis-type = "tablet"; 27 compatible = "pwm-backlight"; [all …]
|
/linux-6.12.1/arch/mips/boot/dts/img/ |
D | pistachio_marduk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 8 /dts-v1/; 14 compatible = "img,pistachio-marduk", "img,pistachio"; 26 stdout-path = "serial1:115200"; 34 reg_1v8: fixed-regulator { 35 compatible = "regulator-fixed"; 36 regulator-name = "aux_adc_vref"; 37 regulator-min-microvolt = <1800000>; 38 regulator-max-microvolt = <1800000>; 39 regulator-boot-on; [all …]
|
D | pistachio.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <dt-bindings/clock/pistachio-clk.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/interrupt-controller/mips-gic.h> 11 #include <dt-bindings/reset/pistachio-resets.h> 16 #address-cells = <1>; 17 #size-cells = <1>; 19 interrupt-parent = <&gic>; 22 #address-cells = <1>; [all …]
|
/linux-6.12.1/sound/soc/codecs/ |
D | ab8500-codec.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) ST-Ericsson SA 2012 8 * for ST-Ericsson. 14 * for ST-Ericsson. 29 #include <linux/mfd/abx500/ab8500-sysctrl.h> 30 #include <linux/mfd/abx500/ab8500-codec.h> 39 #include <sound/soc-dapm.h> 42 #include "ab8500-codec.h" 56 /* Nr of FIR/IIR-coeff banks in ANC-block */ 114 /* Private data for AB8500 device-driver */ [all …]
|
/linux-6.12.1/drivers/pwm/ |
D | pwm-img.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (c) 2014-2015, Imagination Technologies 7 * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation 19 #include <linux/pwm.h> 23 /* PWM registers */ 43 * PWM period is specified with a timebase register, 44 * in number of step periods. The PWM duty cycle is also 49 * Imposing a minimum timebase, will impose a maximum PWM frequency. 81 writel(val, imgchip->base + reg); in img_pwm_writel() 86 return readl(imgchip->base + reg); in img_pwm_readl() [all …]
|
/linux-6.12.1/arch/arm/boot/dts/intel/pxa/ |
D | pxa300-raumfeld-controller.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 /dts-v1/; 5 #include "pxa300-raumfeld-common.dtsi" 9 compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300"; 11 reg_vbatt: regulator-vbatt { 12 compatible = "regulator-fixed"; 13 regulator-name = "vbatt-fixed-supply"; 14 regulator-min-microvolt = <3700000>; 15 regulator-max-microvolt = <3700000>; 16 regulator-always-on; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/reset/ |
D | nxp,lpc1850-rgu.txt | 8 - compatible: Should be "nxp,lpc1850-rgu" 9 - reg: register base and length 10 - clocks: phandle and clock specifier to RGU clocks 11 - clock-names: should contain "delay" and "reg" 12 - #reset-cells: should be 1 20 12 ARM Cortex-M0 subsystem core (LPC43xx only) 39 38 Motor control PWM (MCPWM) 43 42 DAC 56 56 ARM Cortex-M0 application core (LPC4370 only) 59 60 ADCHS (12-bit ADC) (LPC4370 only) [all …]
|