/linux-6.12.1/arch/arm64/boot/dts/freescale/ |
D | imx8-ss-img.dtsi | 8 #clock-cells = <0>; 17 ranges = <0x58000000 0x0 0x58000000 0x1000000>; 20 reg = <0x58400000 0x00050000>; 32 reg = <0x58450000 0x00050000>; 45 reg = <0x585d0000 0x10000>; 57 reg = <0x585f0000 0x10000>;
|
/linux-6.12.1/Documentation/devicetree/bindings/pci/ |
D | faraday,ftpci100.yaml | 18 The host controller appear on the PCI bus with vendor ID 0x159b (Faraday 19 Technology) and product ID 0x4321. 34 interrupt-map-mask = <0xf800 0 0 7>; 36 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ 37 <0x4800 0 0 2 &pci_intc 1>, 38 <0x4800 0 0 3 &pci_intc 2>, 39 <0x4800 0 0 4 &pci_intc 3>, 40 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ 41 <0x5000 0 0 2 &pci_intc 2>, 42 <0x5000 0 0 3 &pci_intc 3>, [all …]
|
D | nvidia,tegra20-pcie.txt | 27 - cell 0 specifies the bus and device numbers of the root port: 30 - cell 1 denotes the upper 32 address bits and should be 0 45 - 0x81000000: I/O memory region 46 - 0x82000000: non-prefetchable memory region 47 - 0xc2000000: prefetchable memory region 73 - pinctrl-0: phandle for the default/active state of pin configurations. 104 - If lanes 0 to 3 are used: 150 - Root port 0 uses 4 lanes, root port 1 is unused. 158 "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes. 171 reg = <0x80003000 0x00000800 /* PADS registers */ [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/gpu/ |
D | nvidia,gk20a.txt | 46 reg = <0x0 0x57000000 0x0 0x01000000>, 47 <0x0 0x58000000 0x0 0x01000000>; 64 reg = <0x0 0x57000000 0x0 0x01000000>, 65 <0x0 0x58000000 0x0 0x01000000>; 82 reg = <0x0 0x17000000 0x0 0x1000000>, 83 <0x0 0x18000000 0x0 0x1000000>; 100 reg = <0x17000000 0x1000000>, 101 <0x18000000 0x1000000>;
|
/linux-6.12.1/arch/arm/mach-pxa/ |
D | addr-map.h | 8 #define PXA_CS0_PHYS 0x00000000 9 #define PXA_CS1_PHYS 0x04000000 10 #define PXA_CS2_PHYS 0x08000000 11 #define PXA_CS3_PHYS 0x0C000000 12 #define PXA_CS4_PHYS 0x10000000 13 #define PXA_CS5_PHYS 0x14000000 15 #define PXA300_CS0_PHYS 0x00000000 /* PXA300/PXA310 _only_ */ 16 #define PXA300_CS1_PHYS 0x30000000 /* PXA300/PXA310 _only_ */ 17 #define PXA3xx_CS2_PHYS 0x10000000 18 #define PXA3xx_CS3_PHYS 0x14000000 [all …]
|
D | pxa-regs.h | 14 #define UNCACHED_PHYS_0 0xfe000000 15 #define UNCACHED_PHYS_0_SIZE 0x00100000 20 * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff 21 * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff 22 * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff 23 * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff 24 * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff 25 * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff 26 * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff 31 #define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) [all …]
|
/linux-6.12.1/arch/arm/boot/dts/gemini/ |
D | gemini.dtsi | 23 pinctrl-0 = <&pflash_default_pins>; 31 reg = <0x40000000 0x1000>; 39 offset = <0x0c>; 41 mask = <0xC0000000>; 49 pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, 159 reg = <0x41000000 0x1000>; 168 reg = <0x42000000 0x100>; 173 pinctrl-0 = <&uart_default_pins>; 179 reg = <0x43000000 0x1000>; 193 reg = <0x45000000 0x100>; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/memory-controllers/ |
D | nvidia,tegra20-mc.yaml | 48 const: 0 69 reg = <0x7000f000 0x400>, /* Controller registers */ 70 <0x58000000 0x02000000>; /* GART aperture */ 74 interrupts = <0 77 4>; 76 #iommu-cells = <0>;
|
/linux-6.12.1/arch/arm/mach-omap2/ |
D | omap24xx.h | 19 #define L4_24XX_BASE 0x48000000 20 #define L4_WK_243X_BASE 0x49000000 21 #define L3_24XX_BASE 0x68000000 24 #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) 25 #define OMAP24XX_IVA_INTC_BASE 0x40000000 28 #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) 29 #define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) 30 #define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) 32 #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) 33 #define OMAP2420_SMS_BASE 0x68008000 [all …]
|
D | iomap.h | 33 #define OMAP2_L3_IO_OFFSET 0x90000000 36 #define OMAP2_L4_IO_OFFSET 0xb2000000 39 #define OMAP4_L3_IO_OFFSET 0xb4000000 42 #define AM33XX_L4_WK_IO_OFFSET 0xb5000000 45 #define OMAP4_L3_PER_IO_OFFSET 0xb1100000 48 #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ 58 #define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ 61 #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ 65 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ 70 /* 0x6e000000 --> 0xfe000000 */ [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/display/ti/ |
D | ti,omap-dss.txt | 50 reg = <0x58000000 0x80>; 61 reg = <0x58001000 0x1000>; 70 reg = <0x58006000 0x200>, 71 <0x58006200 0x100>, 72 <0x58006300 0x100>, 73 <0x58006400 0x1000>; 99 tfp410: encoder@0 { 101 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */ 104 pinctrl-0 = <&tfp410_pins>; 108 #size-cells = <0>; [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/renesas/ |
D | r8a779f4-s4sk.dts | 37 reg = <0x0 0x48000000 0x0 0x58000000>; 42 reg = <0x4 0x80000000 0x0 0x80000000>; 68 pinctrl-0 = <&hscif0_pins>; 76 pinctrl-0 = <&hscif1_pins>; 84 pinctrl-0 = <&i2c2_pins>; 92 pinctrl-0 = <&i2c4_pins>; 100 pinctrl-0 = <&i2c5_pins>; 108 reg = <0x50>; 114 pinctrl-0 = <&sd_pins>; 124 pinctrl-0 = <&scif_clk_pins>; [all …]
|
D | r9a09g011-v2mevk2.dts | 33 #size-cells = <0>; 35 port@0 { 36 reg = <0>; 57 reg = <0x0 0x58000000 0x0 0x28000000>; 62 reg = <0x1 0x80000000 0x0 0x80000000>; 90 gpios = <&pwc 0 GPIO_ACTIVE_HIGH>; 92 states = <3300000 0>, <1800000 1>; 102 phy0: ethernet-phy@0 { 105 reg = <0>; 110 pinctrl-0 = <&emmc_pins>; [all …]
|
/linux-6.12.1/drivers/gpu/drm/etnaviv/ |
D | cmdstream.xml.h | 7 http://0x04.net/cgit/index.cgi/rules-ng-ng 8 git clone git://0x04.net/rules-ng-ng 42 #define FE_OPCODE_LOAD_STATE 0x00000001 43 #define FE_OPCODE_END 0x00000002 44 #define FE_OPCODE_NOP 0x00000003 45 #define FE_OPCODE_DRAW_2D 0x00000004 46 #define FE_OPCODE_DRAW_PRIMITIVES 0x00000005 47 #define FE_OPCODE_DRAW_INDEXED_PRIMITIVES 0x00000006 48 #define FE_OPCODE_WAIT 0x00000007 49 #define FE_OPCODE_LINK 0x00000008 [all …]
|
/linux-6.12.1/drivers/net/wireless/mediatek/mt76/mt7915/ |
D | mmio.c | 21 [INT_SOURCE_CSR] = 0xd7010, 22 [INT_MASK_CSR] = 0xd7014, 23 [INT1_SOURCE_CSR] = 0xd7088, 24 [INT1_MASK_CSR] = 0xd708c, 25 [INT_MCU_CMD_SOURCE] = 0xd51f0, 26 [INT_MCU_CMD_EVENT] = 0x3108, 27 [WFDMA0_ADDR] = 0xd4000, 28 [WFDMA0_PCIE1_ADDR] = 0xd8000, 29 [WFDMA_EXT_CSR_ADDR] = 0xd7000, 30 [CBTOP1_PHY_END] = 0x77ffffff, [all …]
|
/linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
D | omap5.dtsi | 45 #size-cells = <0>; 47 cpu0: cpu@0 { 50 reg = <0x0>; 69 reg = <0x1>; 115 reg = <0 0x40300000 0 0x20000>; /* 128k */ 122 reg = <0 0x48211000 0 0x1000>, 123 <0 0x48212000 0 0x2000>, 124 <0 0x48214000 0 0x2000>, 125 <0 0x48216000 0 0x2000>; 133 reg = <0 0x48281000 0 0x1000>; [all …]
|
D | omap4.dtsi | 40 #size-cells = <0>; 42 cpu@0 { 46 reg = <0x0>; 57 reg = <0x1>; 67 reg = <0x40304000 0xa000>; /* 40k */ 74 reg = <0x48241000 0x1000>, 75 <0x48240100 0x0100>; 81 reg = <0x48242000 0x1000>; 89 reg = <0x48240600 0x20>; 98 reg = <0x48281000 0x1000>; [all …]
|
D | dra7.dtsi | 61 reg = <0x0 0x48211000 0x0 0x1000>, 62 <0x0 0x48212000 0x0 0x2000>, 63 <0x0 0x48214000 0x0 0x2000>, 64 <0x0 0x48216000 0x0 0x2000>; 73 reg = <0x0 0x48281000 0x0 0x1000>; 79 #size-cells = <0>; 81 cpu0: cpu@0 { 84 reg = <0>; 109 opp-supported-hw = <0xFF 0x01>; 119 opp-supported-hw = <0xFF 0x02>; [all …]
|
/linux-6.12.1/drivers/gpu/drm/gma500/ |
D | oaktrail_device.c | 32 return 0; in oaktrail_output_init() 39 #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF 51 if (gma_power_begin(dev, 0)) { in oaktrail_set_brightness() 69 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); in oaktrail_set_brightness() 100 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); in oaktrail_backlight_init() 106 return 0; in oaktrail_backlight_init() 125 struct psb_pipe *p = ®s->pipe[0]; in oaktrail_save_display_registers() 165 for (i = 0; i < 256; i++) in oaktrail_save_display_registers() 204 PSB_WVDC32(0, PP_CONTROL); in oaktrail_save_display_registers() 208 } while (pp_stat & 0x80000000); in oaktrail_save_display_registers() [all …]
|
/linux-6.12.1/drivers/net/wireless/mediatek/mt76/mt7921/ |
D | pci.c | 17 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7961), 19 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7922), 21 { PCI_DEVICE(PCI_VENDOR_ID_ITTIM, 0x7922), 23 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0608), 25 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0616), 27 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7920), 66 { 0x820d0000, 0x30000, 0x10000 }, /* WF_LMAC_TOP (WF_WTBLON) */ in __mt7921_reg_addr() 67 { 0x820ed000, 0x24800, 0x00800 }, /* WF_LMAC_TOP BN0 (WF_MIB) */ in __mt7921_reg_addr() 68 { 0x820e4000, 0x21000, 0x00400 }, /* WF_LMAC_TOP BN0 (WF_TMAC) */ in __mt7921_reg_addr() 69 { 0x820e7000, 0x21e00, 0x00200 }, /* WF_LMAC_TOP BN0 (WF_DMA) */ in __mt7921_reg_addr() [all …]
|
/linux-6.12.1/drivers/net/wireless/mediatek/mt76/mt7925/ |
D | pci.c | 14 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7925), 16 { PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0717), 57 dev->backup_l1 = 0; in mt7925_reg_remap_restore() 62 dev->backup_l2 = 0; in mt7925_reg_remap_restore() 103 { 0x830c0000, 0x000000, 0x0001000 }, /* WF_MCU_BUS_CR_REMAP */ in __mt7925_reg_addr() 104 { 0x54000000, 0x002000, 0x0001000 }, /* WFDMA PCIE0 MCU DMA0 */ in __mt7925_reg_addr() 105 { 0x55000000, 0x003000, 0x0001000 }, /* WFDMA PCIE0 MCU DMA1 */ in __mt7925_reg_addr() 106 { 0x56000000, 0x004000, 0x0001000 }, /* WFDMA reserved */ in __mt7925_reg_addr() 107 { 0x57000000, 0x005000, 0x0001000 }, /* WFDMA MCU wrap CR */ in __mt7925_reg_addr() 108 { 0x58000000, 0x006000, 0x0001000 }, /* WFDMA PCIE1 MCU DMA0 (MEM_DMA) */ in __mt7925_reg_addr() [all …]
|
/linux-6.12.1/drivers/net/wireless/mediatek/mt76/mt7996/ |
D | mmio.c | 21 [WF_AGG_BASE] = { { 0x820e2000, 0x820f2000, 0x830e2000 } }, 22 [WF_ARB_BASE] = { { 0x820e3000, 0x820f3000, 0x830e3000 } }, 23 [WF_TMAC_BASE] = { { 0x820e4000, 0x820f4000, 0x830e4000 } }, 24 [WF_RMAC_BASE] = { { 0x820e5000, 0x820f5000, 0x830e5000 } }, 25 [WF_DMA_BASE] = { { 0x820e7000, 0x820f7000, 0x830e7000 } }, 26 [WF_WTBLOFF_BASE] = { { 0x820e9000, 0x820f9000, 0x830e9000 } }, 27 [WF_ETBF_BASE] = { { 0x820ea000, 0x820fa000, 0x830ea000 } }, 28 [WF_LPON_BASE] = { { 0x820eb000, 0x820fb000, 0x830eb000 } }, 29 [WF_MIB_BASE] = { { 0x820ed000, 0x820fd000, 0x830ed000 } }, 30 [WF_RATE_BASE] = { { 0x820ee000, 0x820fe000, 0x830ee000 } }, [all …]
|
/linux-6.12.1/arch/arm/boot/dts/st/ |
D | stm32h743.dtsi | 54 #clock-cells = <0>; 56 clock-frequency = <0>; 60 #clock-cells = <0>; 66 #clock-cells = <0>; 68 clock-frequency = <0>; 75 reg = <0x40000c00 0x400>; 82 #size-cells = <0>; 84 reg = <0x40002400 0x400>; 95 trigger@0 { 97 reg = <0>; [all …]
|
/linux-6.12.1/crypto/ |
D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/nvidia/ |
D | tegra186.dtsi | 20 reg = <0x0 0x00100000 0x0 0xf000>, 21 <0x0 0x0010f000 0x0 0x1000>; 27 reg = <0x0 0x2200000 0x0 0x10000>, 28 <0x0 0x2210000 0x0 0x10000>; 44 reg = <0x0 0x02490000 0x0 0x10000>; 71 snps,burst-map = <0x7>; 78 reg = <0x0 0x2600000 0x0 0x210000>; 116 dma-channel-mask = <0xfffffffe>; 129 ranges = <0x02900000 0x0 0x02900000 0x200000>; 134 reg = <0x02900800 0x800>; [all …]
|