Home
last modified time | relevance | path

Searched +full:0 +full:x21a2 (Results 1 – 25 of 50) sorted by relevance

12

/linux-6.12.1/arch/arm/boot/dts/nxp/vf/
Dvf-colibri.dtsi16 pinctrl-0 = <&pinctrl_gpio_bl_on>;
17 pwms = <&pwm0 0 5000000 0>;
49 pinctrl-0 = <&pinctrl_flexcan0>;
55 pinctrl-0 = <&pinctrl_flexcan1>;
69 pinctrl-0 = <&pinctrl_dspi1>;
82 pinctrl-0 = <&pinctrl_esdhc1>;
92 pinctrl-0 = <&pinctrl_fec1>;
98 pinctrl-0 = <&pinctrl_i2c0>;
106 pinctrl-0 = <&pinctrl_nfc>;
109 nand@0 {
[all …]
Dvf610m4-colibri.dts22 reg = <0x8c000000 0x3000000>;
48 pinctrl-0 = <&pinctrl_uart2>;
56 VF610_PAD_PTD0__UART2_TX 0x21a2
57 VF610_PAD_PTD1__UART2_RX 0x21a1
58 VF610_PAD_PTD2__UART2_RTS 0x21a2
59 VF610_PAD_PTD3__UART2_CTS 0x21a1
Dvf610-zii-spb4.dts24 reg = <0x80000000 0x20000000>;
29 pinctrl-0 = <&pinctrl_leds_debug>;
68 pinctrl-0 = <&pinctrl_dspi1>;
71 flash@0 {
75 reg = <0>;
90 pinctrl-0 = <&pinctrl_esdhc0>;
102 pinctrl-0 = <&pinctrl_esdhc1>;
111 pinctrl-0 = <&pinctrl_fec1>;
121 #size-cells = <0>;
126 switch0: ethernet-switch@0 {
[all …]
Dvf610-bk4.dts20 reg = <0x80000000 0x8000000>;
25 #clock-cells = <0>;
31 #clock-cells = <0>;
38 pinctrl-0 = <&pinctrl_gpio_leds>;
66 pinctrl-0 = <&pinctrl_gpio_spi>;
69 #size-cells = <0>;
74 num-chipselects = <0>;
76 gpio@0 {
78 reg = <0>;
100 pinctrl-0 = <&pinctrl_can0>;
[all …]
Dvf610-zii-scu4-aib.dts18 reg = <0x80000000 0x20000000>;
23 pinctrl-0 = <&pinctrl_leds_debug>;
28 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
35 pinctrl-0 = <&pinctrl_mdio_mux>;
43 #size-cells = <0>;
48 #size-cells = <0>;
50 switch0: ethernet-switch@0 {
52 reg = <0>;
53 dsa,member = <0 0>;
58 #size-cells = <0>;
[all …]
Dvf610-zii-dev.dtsi54 reg = <0x80000000 0x20000000>;
59 pinctrl-0 = <&pinctrl_leds_debug>;
78 pinctrl-0 = <&pinctrl_usb_vbus>;
85 gpio = <&gpio0 6 0>;
99 pinctrl-0 = <&pinctrl_adc0_ad5>;
114 pinctrl-0 = <&pinctrl_esdhc1>;
122 pinctrl-0 = <&pinctrl_fec0>;
129 pinctrl-0 = <&pinctrl_fec1>;
139 #size-cells = <0>;
149 pinctrl-0 = <&pinctrl_i2c0>;
[all …]
Dvf610-twr.dts18 reg = <0x80000000 0x8000000>;
23 #clock-cells = <0>;
29 #clock-cells = <0>;
80 pinctrl-0 = <&pinctrl_adc0_ad5>;
95 bus-num = <0>;
97 pinctrl-0 = <&pinctrl_dspi0>;
100 sflash: at26df081a@0 {
107 reg = <0>;
117 pinctrl-0 = <&pinctrl_esdhc1>;
127 pinctrl-0 = <&pinctrl_fec0>;
[all …]
Dvf610-zii-ssmb-spu3.dts28 reg = <0x80000000 0x20000000>;
33 pinctrl-0 = <&pinctrl_leds_debug>;
72 pinctrl-0 = <&pinctrl_dspi1>;
80 flash@0 {
84 reg = <0>;
87 partition@0 {
88 label = "m25p128-0";
89 reg = <0x0 0x01000000>;
104 pinctrl-0 = <&pinctrl_esdhc0>;
116 pinctrl-0 = <&pinctrl_esdhc1>;
[all …]
Dvf610-cosmic.dts20 reg = <0x80000000 0x10000000>;
25 #clock-cells = <0>;
37 pinctrl-0 = <&pinctrl_esdhc1>;
45 pinctrl-0 = <&pinctrl_fec1>;
53 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
54 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
55 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
56 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
57 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
58 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
[all …]
Dvf610m4-cosmic.dts77 pinctrl-0 = <&pinctrl_uart3>;
85 VF610_PAD_PTA20__UART3_TX 0x21a2
86 VF610_PAD_PTA21__UART3_RX 0x21a1
Dvf610-zii-ssmb-dtu.dts28 reg = <0x80000000 0x20000000>;
33 pinctrl-0 = <&pinctrl_leds_debug>;
79 pinctrl-0 = <&pinctrl_esdhc0>;
91 pinctrl-0 = <&pinctrl_esdhc1>;
100 pinctrl-0 = <&pinctrl_fec1>;
110 #size-cells = <0>;
115 switch0: ethernet-switch@0 {
117 pinctrl-0 = <&pinctrl_gpio_switch0>;
119 reg = <0>;
128 #size-cells = <0>;
[all …]
Dvf610-zii-cfu1.dts20 reg = <0x80000000 0x20000000>;
25 pinctrl-0 = <&pinctrl_leds_debug>;
68 pinctrl-0 = <&pinctrl_optical>;
97 pinctrl-0 = <&pinctrl_dspi1>;
105 flash@0 {
109 reg = <0>;
112 partition@0 {
113 label = "m25p128-0";
114 reg = <0x0 0x01000000>;
129 pinctrl-0 = <&pinctrl_esdhc0>;
[all …]
Dvf610-zii-dev-rev-c.dts15 pinctrl-0 = <&pinctrl_mdio_mux>;
22 #size-cells = <0>;
27 #size-cells = <0>;
29 switch0: switch@0 {
31 pinctrl-0 = <&pinctrl_gpio_switch0>;
33 reg = <0>;
34 dsa,member = <0 0>;
43 #size-cells = <0>;
45 port@0 {
46 reg = <0>;
[all …]
/linux-6.12.1/Documentation/devicetree/bindings/media/
Dqcom,sc7280-venus.yaml103 reg = <0x0aa00000 0xd0600>;
119 interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
120 <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
123 iommus = <&apps_smmu 0x2180 0x20>,
124 <&apps_smmu 0x2184 0x20>;
137 iommus = <&apps_smmu 0x21a2 0x0>;
/linux-6.12.1/arch/arm/boot/dts/ti/omap/
Domap3-cm-t3x30.dtsi10 cpu@0 {
27 OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
28 OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
34 OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
35 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
36 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
37 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
38 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
39 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
40 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
[all …]
Dlogicpd-torpedo-som.dtsi11 cpu@0 {
18 reg = <0x80000000 0>;
32 #clock-cells = <0>;
44 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
46 nand@0,0 {
48 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
50 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
55 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
56 gpmc,sync-clk-ps = <0>;
57 gpmc,cs-on-ns = <0>;
[all …]
Domap3-sniper.dts15 cpu@0 {
22 reg = <0x80000000 0x20000000>; /* 512 MB */
31 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */
32 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
38 OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */
39 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */
45 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
46 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
52 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
53 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
[all …]
Domap3-ldp.dts17 reg = <0x80000000 0x8000000>; /* 128 MB */
21 cpu@0 {
29 pinctrl-0 = <&gpio_key_pins>;
97 ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
98 <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
100 nand@0,0 {
102 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
104 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
111 gpmc,sync-clk-ps = <0>;
112 gpmc,cs-on-ns = <0>;
[all …]
Dlogicpd-som-lv.dtsi7 cpu@0 {
14 reg = <0x80000000 0>;
22 gpio = <&gpio1 3 0>; /* gpio_3 */
31 pinctrl-0 = <&hsusb2_reset_pin>;
34 #phy-cells = <0>;
39 #clock-cells = <0>;
46 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
48 nand@0,0 {
50 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
52 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
[all …]
Domap3-lilly-a83x.dtsi13 bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
18 reg = <0x80000000 0x8000000>; /* 128 MB */
50 #phy-cells = <0>;
59 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
65 OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
71 OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
81 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
82 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
83 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
84 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
[all …]
/linux-6.12.1/arch/arm64/boot/dts/qcom/
Dsc7280-chrome-common.dtsi32 CLUSTER_SLEEP_0: cluster-sleep-0 {
34 arm,psci-suspend-param = <0x40003444>;
44 reg = <0x0 0x8ad00000 0x0 0x500000>;
49 reg = <0x0 0x8b200000 0x0 0x500000>;
94 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
97 spi_flash: flash@0 {
99 reg = <0>;
127 qcom,halt-regs = <&tcsr_1 0x17000>;
129 firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
140 iommus = <&apps_smmu 0x2180 0x20>,
[all …]
/linux-6.12.1/arch/arm/boot/dts/nxp/mxs/
Dimx28-pinfunc.h13 #define MX28_PAD_GPMI_D00__GPMI_D0 0x0000
14 #define MX28_PAD_GPMI_D01__GPMI_D1 0x0010
15 #define MX28_PAD_GPMI_D02__GPMI_D2 0x0020
16 #define MX28_PAD_GPMI_D03__GPMI_D3 0x0030
17 #define MX28_PAD_GPMI_D04__GPMI_D4 0x0040
18 #define MX28_PAD_GPMI_D05__GPMI_D5 0x0050
19 #define MX28_PAD_GPMI_D06__GPMI_D6 0x0060
20 #define MX28_PAD_GPMI_D07__GPMI_D7 0x0070
21 #define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100
22 #define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110
[all …]
/linux-6.12.1/sound/soc/codecs/
Dmax98390.h10 #define MAX98390_SOFTWARE_RESET 0x2000
11 #define MAX98390_INT_RAW1 0x2002
12 #define MAX98390_INT_RAW2 0x2003
13 #define MAX98390_INT_RAW3 0x2004
14 #define MAX98390_INT_STATE1 0x2005
15 #define MAX98390_INT_STATE2 0x2006
16 #define MAX98390_INT_STATE3 0x2007
17 #define MAX98390_INT_FLAG1 0x2008
18 #define MAX98390_INT_FLAG2 0x2009
19 #define MAX98390_INT_FLAG3 0x200a
[all …]
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/gca/
Dgfx_6_0_d.h26 #define ixCLIPPER_DEBUG_REG00 0x0000
27 #define ixCLIPPER_DEBUG_REG01 0x0001
28 #define ixCLIPPER_DEBUG_REG02 0x0002
29 #define ixCLIPPER_DEBUG_REG03 0x0003
30 #define ixCLIPPER_DEBUG_REG04 0x0004
31 #define ixCLIPPER_DEBUG_REG05 0x0005
32 #define ixCLIPPER_DEBUG_REG06 0x0006
33 #define ixCLIPPER_DEBUG_REG07 0x0007
34 #define ixCLIPPER_DEBUG_REG08 0x0008
35 #define ixCLIPPER_DEBUG_REG09 0x0009
[all …]
Dgfx_7_2_d.h27 #define mmCB_BLEND_RED 0xa105
28 #define mmCB_BLEND_GREEN 0xa106
29 #define mmCB_BLEND_BLUE 0xa107
30 #define mmCB_BLEND_ALPHA 0xa108
31 #define mmCB_COLOR_CONTROL 0xa202
32 #define mmCB_BLEND0_CONTROL 0xa1e0
33 #define mmCB_BLEND1_CONTROL 0xa1e1
34 #define mmCB_BLEND2_CONTROL 0xa1e2
35 #define mmCB_BLEND3_CONTROL 0xa1e3
36 #define mmCB_BLEND4_CONTROL 0xa1e4
[all …]

12