/linux-6.12.1/arch/sparc/include/asm/ |
D | obio.h | 3 * obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d. 18 * | 0xFE | DEVID | | XDBUS ID | | 20 * 35 28 27 20 19 10 9 8 7 0 23 #define CSR_BASE_ADDR 0xe0000000 31 * | 0xF | DEVID[7:1] | | 33 * 35 32 31 25 24 0 36 #define ECSR_BASE_ADDR 0x00000000 44 #define BW_LOCAL_BASE 0xfff00000 46 #define BW_CID 0x00000000 47 #define BW_DBUS_CTRL 0x00000008 [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/mtd/partitions/ |
D | brcm,bcm4908-partitions.yaml | 33 "^partition@[0-9a-f]+$": 53 partition@0 { 55 reg = <0x0 0x100000>; 60 reg = <0x100000 0xf00000>; 65 reg = <0x1000000 0xf00000>; 70 reg = <0x1f00000 0x100000>;
|
/linux-6.12.1/drivers/accel/habanalabs/include/gaudi/asic_reg/ |
D | tpc0_qm_masks.h | 23 #define TPC0_QM_GLBL_CFG0_PQF_EN_SHIFT 0 24 #define TPC0_QM_GLBL_CFG0_PQF_EN_MASK 0xF 26 #define TPC0_QM_GLBL_CFG0_CQF_EN_MASK 0x1F0 28 #define TPC0_QM_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define TPC0_QM_GLBL_CFG1_PQF_STOP_SHIFT 0 32 #define TPC0_QM_GLBL_CFG1_PQF_STOP_MASK 0xF 34 #define TPC0_QM_GLBL_CFG1_CQF_STOP_MASK 0x1F0 36 #define TPC0_QM_GLBL_CFG1_CP_STOP_MASK 0x3E00 38 #define TPC0_QM_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 40 #define TPC0_QM_GLBL_CFG1_CQF_FLUSH_MASK 0x1F00000 [all …]
|
D | mme0_qm_masks.h | 23 #define MME0_QM_GLBL_CFG0_PQF_EN_SHIFT 0 24 #define MME0_QM_GLBL_CFG0_PQF_EN_MASK 0xF 26 #define MME0_QM_GLBL_CFG0_CQF_EN_MASK 0x1F0 28 #define MME0_QM_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define MME0_QM_GLBL_CFG1_PQF_STOP_SHIFT 0 32 #define MME0_QM_GLBL_CFG1_PQF_STOP_MASK 0xF 34 #define MME0_QM_GLBL_CFG1_CQF_STOP_MASK 0x1F0 36 #define MME0_QM_GLBL_CFG1_CP_STOP_MASK 0x3E00 38 #define MME0_QM_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 40 #define MME0_QM_GLBL_CFG1_CQF_FLUSH_MASK 0x1F00000 [all …]
|
D | nic0_qm0_masks.h | 23 #define NIC0_QM0_GLBL_CFG0_PQF_EN_SHIFT 0 24 #define NIC0_QM0_GLBL_CFG0_PQF_EN_MASK 0xF 26 #define NIC0_QM0_GLBL_CFG0_CQF_EN_MASK 0x1F0 28 #define NIC0_QM0_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define NIC0_QM0_GLBL_CFG1_PQF_STOP_SHIFT 0 32 #define NIC0_QM0_GLBL_CFG1_PQF_STOP_MASK 0xF 34 #define NIC0_QM0_GLBL_CFG1_CQF_STOP_MASK 0x1F0 36 #define NIC0_QM0_GLBL_CFG1_CP_STOP_MASK 0x3E00 38 #define NIC0_QM0_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 40 #define NIC0_QM0_GLBL_CFG1_CQF_FLUSH_MASK 0x1F00000 [all …]
|
D | dma0_qm_masks.h | 23 #define DMA0_QM_GLBL_CFG0_PQF_EN_SHIFT 0 24 #define DMA0_QM_GLBL_CFG0_PQF_EN_MASK 0xF 26 #define DMA0_QM_GLBL_CFG0_CQF_EN_MASK 0x1F0 28 #define DMA0_QM_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define DMA0_QM_GLBL_CFG1_PQF_STOP_SHIFT 0 32 #define DMA0_QM_GLBL_CFG1_PQF_STOP_MASK 0xF 34 #define DMA0_QM_GLBL_CFG1_CQF_STOP_MASK 0x1F0 36 #define DMA0_QM_GLBL_CFG1_CP_STOP_MASK 0x3E00 38 #define DMA0_QM_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 40 #define DMA0_QM_GLBL_CFG1_CQF_FLUSH_MASK 0x1F00000 [all …]
|
/linux-6.12.1/drivers/accel/habanalabs/include/gaudi2/asic_reg/ |
D | dcore0_edma0_qm_masks.h | 24 #define DCORE0_EDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT 0 25 #define DCORE0_EDMA0_QM_GLBL_CFG0_PQF_EN_MASK 0xF 27 #define DCORE0_EDMA0_QM_GLBL_CFG0_CQF_EN_MASK 0x1F0 29 #define DCORE0_EDMA0_QM_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define DCORE0_EDMA0_QM_GLBL_CFG0_ARC_CQF_EN_MASK 0x4000 34 #define DCORE0_EDMA0_QM_GLBL_CFG1_PQF_STOP_SHIFT 0 35 #define DCORE0_EDMA0_QM_GLBL_CFG1_PQF_STOP_MASK 0xF 37 #define DCORE0_EDMA0_QM_GLBL_CFG1_CQF_STOP_MASK 0x1F0 39 #define DCORE0_EDMA0_QM_GLBL_CFG1_CP_STOP_MASK 0x3E00 41 #define DCORE0_EDMA0_QM_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 [all …]
|
D | pdma0_qm_masks.h | 24 #define PDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT 0 25 #define PDMA0_QM_GLBL_CFG0_PQF_EN_MASK 0xF 27 #define PDMA0_QM_GLBL_CFG0_CQF_EN_MASK 0x1F0 29 #define PDMA0_QM_GLBL_CFG0_CP_EN_MASK 0x3E00 31 #define PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_MASK 0x4000 34 #define PDMA0_QM_GLBL_CFG1_PQF_STOP_SHIFT 0 35 #define PDMA0_QM_GLBL_CFG1_PQF_STOP_MASK 0xF 37 #define PDMA0_QM_GLBL_CFG1_CQF_STOP_MASK 0x1F0 39 #define PDMA0_QM_GLBL_CFG1_CP_STOP_MASK 0x3E00 41 #define PDMA0_QM_GLBL_CFG1_PQF_FLUSH_MASK 0xF0000 [all …]
|
/linux-6.12.1/arch/mips/boot/dts/ingenic/ |
D | rs90.dts | 16 reg = <0x0 0x2000000>; 26 reg = <0x1f00000 0x100000>; 42 pwms = <&pwm 3 40000 0>; 44 brightness-levels = <0 16 32 48 64 80 112 144 192 255>; 48 pinctrl-0 = <&pins_pwm3>; 53 keys@0 { 56 key-0 { 113 key@0 { 169 #phy-cells = <0>; 234 pinctrl-0 = <&pins_mmc1>; [all …]
|
/linux-6.12.1/drivers/input/joystick/ |
D | cobra.c | 26 …START, BTN_SELECT, BTN_TL, BTN_TR, BTN_X, BTN_Y, BTN_Z, BTN_A, BTN_B, BTN_C, BTN_TL2, BTN_TR2, 0 }; 47 for (i = 0; i < 2; i++) { in cobra_read_packet() 48 r[i] = buf[i] = 0; in cobra_read_packet() 57 t[0]--; t[1]--; in cobra_read_packet() 59 for (i = 0, w = u ^ v; i < 2 && w; i++, w >>= 2) in cobra_read_packet() 60 if (w & 0x30) { in cobra_read_packet() 61 if ((w & 0x30) < 0x30 && r[i] < COBRA_LENGTH && t[i] > 0) { in cobra_read_packet() 65 } else t[i] = 0; in cobra_read_packet() 67 } while (t[0] > 0 || t[1] > 0); in cobra_read_packet() 71 ret = 0; in cobra_read_packet() [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nuvoton/ |
D | nuvoton-npcm730-gsj.dts | 35 reg = <0 0x40000000>; 47 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; 135 pinctrl-0 = <&spi0cs1_pins>; 138 flash@0 { 142 reg = <0>; 149 bmc@0 { 151 reg = <0x000000 0x2000000>; 153 u-boot@0 { 155 reg = <0x0000000 0x80000>; 160 reg = <0x00100000 0x40000>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/qcom/ |
D | qcom-msm8226-samsung-matisse-common.dtsi | 29 reg = <0x03200000 0x800000>; 82 pinctrl-0 = <&backlight_i2c_default_state>; 88 #size-cells = <0>; 92 reg = <0x2c>; 94 dev-ctrl = /bits/ 8 <0x80>; 95 init-brt = /bits/ 8 <0x3f>; 97 pwms = <&backlight_pwm 0 100000>; 101 rom-addr = /bits/ 8 <0xa0>; 102 rom-val = /bits/ 8 <0x44>; 106 rom-addr = /bits/ 8 <0xa1>; [all …]
|
D | qcom-apq8026-samsung-milletwifi.dts | 37 reg = <0x03200000 0x800000>; 90 pinctrl-0 = <&backlight_i2c_default_state>; 96 #size-cells = <0>; 100 reg = <0x2c>; 103 dev-ctrl = /bits/ 8 <0x80>; 104 init-brt = /bits/ 8 <0x3f>; 112 rom-addr = /bits/ 8 <0xa3>; 113 rom-val = /bits/ 8 <0x5e>; 118 * (0, 120deg, 240deg, -, -, -), 122 rom-addr = /bits/ 8 <0xa5>; [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/freescale/ |
D | fsl-ls1012a.dtsi | 32 #size-cells = <0>; 34 cpu0: cpu@0 { 37 reg = <0x0>; 38 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 54 arm,psci-suspend-param = <0x0>; 63 #clock-cells = <0>; 70 #clock-cells = <0>; 92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */ 93 <0x0 0x1402000 0 0x2000>, /* GICC */ 94 <0x0 0x1404000 0 0x2000>, /* GICH */ [all …]
|
D | fsl-ls1043a.dtsi | 37 #size-cells = <0>; 45 cpu0: cpu@0 { 48 reg = <0x0>; 49 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 58 reg = <0x1>; 59 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 68 reg = <0x2>; 69 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 78 reg = <0x3>; 79 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
D | fsl-ls1046a.dtsi | 38 #size-cells = <0>; 40 cpu0: cpu@0 { 43 reg = <0x0>; 44 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 53 reg = <0x1>; 54 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 63 reg = <0x2>; 64 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 73 reg = <0x3>; 74 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
/linux-6.12.1/drivers/net/ethernet/qlogic/qed/ |
D | qed_init_ops.c | 26 0, 27 0, 28 0x1c02, /* win 2: addr=0x1c02000, size=4096 bytes */ 29 0x1c80, /* win 3: addr=0x1c80000, size=4096 bytes */ 30 0x1d00, /* win 4: addr=0x1d00000, size=4096 bytes */ 31 0x1d01, /* win 5: addr=0x1d01000, size=4096 bytes */ 32 0x1d02, /* win 6: addr=0x1d02000, size=4096 bytes */ 33 0x1d80, /* win 7: addr=0x1d80000, size=4096 bytes */ 34 0x1d81, /* win 8: addr=0x1d81000, size=4096 bytes */ 35 0x1d82, /* win 9: addr=0x1d82000, size=4096 bytes */ [all …]
|
/linux-6.12.1/arch/mips/lantiq/xway/ |
D | sysctrl.c | 21 #define CGU_IFCCR 0x0018 22 #define CGU_IFCCR_VR9 0x0024 24 #define CGU_SYS 0x0010 26 #define CGU_PCICR 0x0034 27 #define CGU_PCICR_VR9 0x0038 29 #define CGU_EPHY 0x10 33 #define PMU_PWDCR 0x1C 35 #define PMU_PWDSR 0x20 37 #define PMU_PWDCR1 0x24 39 #define PMU_PWDSR1 0x28 [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/qcom/ |
D | msm8994.dtsi | 29 #clock-cells = <0>; 36 #clock-cells = <0>; 44 #size-cells = <0>; 46 CPU0: cpu@0 { 49 reg = <0x0 0x0>; 62 reg = <0x0 0x1>; 70 reg = <0x0 0x2>; 78 reg = <0x0 0x3>; 86 reg = <0x0 0x100>; 99 reg = <0x0 0x101>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nxp/ls/ |
D | ls1021a.dtsi | 31 #size-cells = <0>; 36 reg = <0xf00>; 37 clocks = <&clockgen 1 0>; 44 reg = <0xf01>; 45 clocks = <&clockgen 1 0>; 50 memory@0 { 52 reg = <0x0 0x0 0x0 0x0>; 57 #clock-cells = <0>; 80 offset = <0xb0>; 81 mask = <0x02>; [all …]
|
/linux-6.12.1/include/linux/qed/ |
D | common_hsi.h | 16 #define PTR_LO(x) ((u32)(((uintptr_t)(x)) & 0xffffffff)) 23 } while (0) 47 #define ISCSI_CDU_TASK_SEG_TYPE 0 48 #define FCOE_CDU_TASK_SEG_TYPE 0 59 #define YSTORM_QZONE_SIZE 0 60 #define PSTORM_QZONE_SIZE 0 97 #define FW_ENGINEERING_VERSION 0 158 #define CDU_SEG_TYPE_OFFSET_REG_OFFSET_MASK (0x1ffff) 161 #define CDU_VF_FL_SEG_TYPE_OFFSET_REG_OFFSET_MASK (0xfff) 163 #define CDU_CONTEXT_VALIDATION_CFG_ENABLE_SHIFT (0) [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/gmc/ |
D | gmc_8_1_sh_mask.h | 27 #define MC_CONFIG__MCDW_WR_ENABLE_MASK 0x1 28 #define MC_CONFIG__MCDW_WR_ENABLE__SHIFT 0x0 29 #define MC_CONFIG__MCDX_WR_ENABLE_MASK 0x2 30 #define MC_CONFIG__MCDX_WR_ENABLE__SHIFT 0x1 31 #define MC_CONFIG__MCDY_WR_ENABLE_MASK 0x4 32 #define MC_CONFIG__MCDY_WR_ENABLE__SHIFT 0x2 33 #define MC_CONFIG__MCDZ_WR_ENABLE_MASK 0x8 34 #define MC_CONFIG__MCDZ_WR_ENABLE__SHIFT 0x3 35 #define MC_CONFIG__MCDS_WR_ENABLE_MASK 0x10 36 #define MC_CONFIG__MCDS_WR_ENABLE__SHIFT 0x4 [all …]
|
D | gmc_7_1_sh_mask.h | 27 #define MC_CONFIG__MCDW_WR_ENABLE_MASK 0x1 28 #define MC_CONFIG__MCDW_WR_ENABLE__SHIFT 0x0 29 #define MC_CONFIG__MCDX_WR_ENABLE_MASK 0x2 30 #define MC_CONFIG__MCDX_WR_ENABLE__SHIFT 0x1 31 #define MC_CONFIG__MCDY_WR_ENABLE_MASK 0x4 32 #define MC_CONFIG__MCDY_WR_ENABLE__SHIFT 0x2 33 #define MC_CONFIG__MCDZ_WR_ENABLE_MASK 0x8 34 #define MC_CONFIG__MCDZ_WR_ENABLE__SHIFT 0x3 35 #define MC_CONFIG__MCDS_WR_ENABLE_MASK 0x10 36 #define MC_CONFIG__MCDS_WR_ENABLE__SHIFT 0x4 [all …]
|
/linux-6.12.1/drivers/net/ethernet/qlogic/qlcnic/ |
D | qlcnic_hw.c | 15 #define OCM_WIN_P3P(addr) (addr & 0xffc0000) 19 #define CRB_BLK(off) ((off >> 20) & 0x3f) 20 #define CRB_SUBBLK(off) ((off >> 16) & 0xf) 21 #define CRB_WINDOW_2M (0x130060) 22 #define CRB_HI(off) ((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000)) 23 #define CRB_INDIRECT_2M (0x1e0000UL) 52 {{{0, 0, 0, 0} } }, /* 0: PCI */ 53 {{{1, 0x0100000, 0x0102000, 0x120000}, /* 1: PCIE */ 54 {1, 0x0110000, 0x0120000, 0x130000}, 55 {1, 0x0120000, 0x0122000, 0x124000}, [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/include/asic_reg/bif/ |
D | bif_4_1_sh_mask.h | 27 #define MM_INDEX__MM_OFFSET_MASK 0x7fffffff 28 #define MM_INDEX__MM_OFFSET__SHIFT 0x0 29 #define MM_INDEX__MM_APER_MASK 0x80000000 30 #define MM_INDEX__MM_APER__SHIFT 0x1f 31 #define MM_INDEX_HI__MM_OFFSET_HI_MASK 0xffffffff 32 #define MM_INDEX_HI__MM_OFFSET_HI__SHIFT 0x0 33 #define MM_DATA__MM_DATA_MASK 0xffffffff 34 #define MM_DATA__MM_DATA__SHIFT 0x0 35 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE_MASK 0x2 36 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE__SHIFT 0x1 [all …]
|