1 /* 2 * Copyright (c) 2016-2017 The Linux Foundation. All rights reserved. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for 5 * any purpose with or without fee is hereby granted, provided that the 6 * above copyright notice and this permission notice appear in all 7 * copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 10 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED 11 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE 12 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL 13 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 14 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 15 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 16 * PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #ifndef _TCL_DATA_CMD_H_ 20 #define _TCL_DATA_CMD_H_ 21 #if !defined(__ASSEMBLER__) 22 #endif 23 24 #include "buffer_addr_info.h" 25 26 // ################ START SUMMARY ################# 27 // 28 // Dword Fields 29 // 0-1 struct buffer_addr_info buf_addr_info; 30 // 2 buf_or_ext_desc_type[0], epd[1], encap_type[3:2], encrypt_type[7:4], src_buffer_swap[8], link_meta_swap[9], reserved_2a[11:10], search_type[13:12], addrx_en[14], addry_en[15], tcl_cmd_number[31:16] 31 // 3 data_length[15:0], ipv4_checksum_en[16], udp_over_ipv4_checksum_en[17], udp_over_ipv6_checksum_en[18], tcp_over_ipv4_checksum_en[19], tcp_over_ipv6_checksum_en[20], to_fw[21], reserved_3a[22], packet_offset[31:23] 32 // 4 buffer_timestamp[18:0], buffer_timestamp_valid[19], mesh_enable[20], hlos_tid_overwrite[21], hlos_tid[25:22], lmac_id[27:26], reserved_4[31:28] 33 // 5 dscp_tid_table_num[5:0], search_index[25:6], cache_set_num[29:26], reserved_5[31:30] 34 // 6 reserved_6a[19:0], ring_id[27:20], looping_count[31:28] 35 // 36 // ################ END SUMMARY ################# 37 38 #define NUM_OF_DWORDS_TCL_DATA_CMD 7 39 40 struct tcl_data_cmd { 41 struct buffer_addr_info buf_addr_info; 42 uint32_t buf_or_ext_desc_type : 1, //[0] 43 epd : 1, //[1] 44 encap_type : 2, //[3:2] 45 encrypt_type : 4, //[7:4] 46 src_buffer_swap : 1, //[8] 47 link_meta_swap : 1, //[9] 48 reserved_2a : 2, //[11:10] 49 search_type : 2, //[13:12] 50 addrx_en : 1, //[14] 51 addry_en : 1, //[15] 52 tcl_cmd_number : 16; //[31:16] 53 uint32_t data_length : 16, //[15:0] 54 ipv4_checksum_en : 1, //[16] 55 udp_over_ipv4_checksum_en : 1, //[17] 56 udp_over_ipv6_checksum_en : 1, //[18] 57 tcp_over_ipv4_checksum_en : 1, //[19] 58 tcp_over_ipv6_checksum_en : 1, //[20] 59 to_fw : 1, //[21] 60 reserved_3a : 1, //[22] 61 packet_offset : 9; //[31:23] 62 uint32_t buffer_timestamp : 19, //[18:0] 63 buffer_timestamp_valid : 1, //[19] 64 mesh_enable : 1, //[20] 65 hlos_tid_overwrite : 1, //[21] 66 hlos_tid : 4, //[25:22] 67 lmac_id : 2, //[27:26] 68 reserved_4 : 4; //[31:28] 69 uint32_t dscp_tid_table_num : 6, //[5:0] 70 search_index : 20, //[25:6] 71 cache_set_num : 4, //[29:26] 72 reserved_5 : 2; //[31:30] 73 uint32_t reserved_6a : 20, //[19:0] 74 ring_id : 8, //[27:20] 75 looping_count : 4; //[31:28] 76 }; 77 78 /* 79 80 struct buffer_addr_info buf_addr_info 81 82 Details of the physical address for a single buffer 83 84 It also contains return ownership info as well as some 85 meta data for SW related to this buffer. 86 87 88 89 In case of Buf_or_ext_desc_type indicating 90 'MSDU_buffer', this address indicates the start of the meta 91 data that is preceding the actual packet data. 92 93 The start of the actual packet data is provided by 94 field: Packet_offset 95 96 buf_or_ext_desc_type 97 98 <enum 0 MSDU_buffer> The address points to an MSDU 99 buffer. 100 101 <enum 1 extension_descriptor> The address points to an 102 MSDU link extension descriptor 103 104 < legal all> 105 106 epd 107 108 When this bit is set then input packet is an EPD type 109 110 <legal all> 111 112 encap_type 113 114 Indicates the encapsulation that HW will perform: 115 116 <enum 0 RAW> No encapsulation 117 118 <enum 1 Native_WiFi> 119 120 <enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses 121 SNAP/LLC) 122 123 <enum 3 802_3> DO NOT USE. Indicate Ethernet 124 125 126 127 Used by the OLE during encapsulation. 128 129 <legal all> 130 131 encrypt_type 132 133 Field only valid for encap_type: RAW 134 135 136 137 Indicates type of decrypt cipher used (as defined in the 138 peer entry) 139 140 <enum 0 wep_40> WEP 40-bit 141 142 <enum 1 wep_104> WEP 104-bit 143 144 <enum 2 tkip_no_mic> TKIP without MIC 145 146 <enum 3 wep_128> WEP 128-bit 147 148 <enum 4 tkip_with_mic> TKIP with MIC 149 150 <enum 5 wapi> WAPI 151 152 <enum 6 aes_ccmp_128> AES CCMP 128 153 154 <enum 7 no_cipher> No crypto 155 156 <enum 8 aes_ccmp_256> AES CCMP 256 157 158 <enum 9 aes_gcmp_128> AES CCMP 128 159 160 <enum 10 aes_gcmp_256> AES CCMP 256 161 162 <enum 11 wapi_gcm_sm4> WAPI GCM SM4 163 164 165 166 <enum 12 wep_varied_width> DO not use... Only for higher 167 layer modules.. 168 169 <legal 0-12> 170 171 src_buffer_swap 172 173 Treats source memory (packet buffer) organization as 174 big-endian. The packets are read and byte swapped. 175 176 1'b0: Source memory is little endian 177 178 1'b1: Source memory is big endian 179 180 <legal all> 181 182 link_meta_swap 183 184 Treats link descriptor and Metadata as big-endian. The 185 link descriptor/Metadata is read and byte swapped. 186 187 1'b0: Memory is little endian 188 189 1'b1: Memory is big endian 190 191 <legal all> 192 193 reserved_2a 194 195 <legal 0> 196 197 search_type 198 199 Search type select 200 201 202 203 <enum 0 Normal_search> Address and flow search will use 204 packet contents 205 206 <enum 1 Index_based_address_search> Address search will 207 208 <enum 2 Index_based_flow_search> Flow search will use 209 'search_index', and address search will use packet contents 210 211 <legal 0-2> 212 213 addrx_en 214 215 Address X search enable in ASE 216 217 1'b0: Search disable 218 219 1'b1: Search Enable 220 221 <legal all> 222 223 addry_en 224 225 Address Y search enable in ASE 226 227 1'b0: Search disable 228 229 1'b1: Search Enable 230 231 <legal all> 232 233 tcl_cmd_number 234 235 This number can be used by SW to track, identify and 236 link the created commands with the command statuses 237 238 239 240 Is set to the value 'TCL_CMD_Number' of the related 241 TCL_DATA command 242 243 <legal all> 244 245 data_length 246 247 Valid Data length in bytes. 248 249 250 251 MSDU length in case of direct descriptor. 252 253 Length of link extension descriptor in case of Link 254 extension descriptor. This is used to know the size of 255 Metadata. 256 257 <legal all> 258 259 ipv4_checksum_en 260 261 OLE related control 262 263 Enable IPv4 checksum replacement 264 265 udp_over_ipv4_checksum_en 266 267 OLE related control 268 269 Enable UDP over IPv4 checksum replacement. UDP checksum 270 over IPv4 is optional for TCP/IP stacks. 271 272 udp_over_ipv6_checksum_en 273 274 OLE related control 275 276 Enable UDP over IPv6 checksum replacement. UDP checksum 277 over IPv6 is mandatory for TCP/IP stacks. 278 279 tcp_over_ipv4_checksum_en 280 281 OLE related control 282 283 Enable TCP checksum over IPv4 replacement 284 285 tcp_over_ipv6_checksum_en 286 287 OLE related control 288 289 Enable TCP checksum over IPv6 replacement 290 291 to_fw 292 293 Forward packet to FW along with classification result. 294 The packet will not be forward to TQM when this bit is set 295 296 297 298 1'b0: Use classification result to forward the packet. 299 300 1'b1: Override classification result and forward packet 301 only to FW. 302 303 <legal all> 304 305 reserved_3a 306 307 <legal 0> 308 309 packet_offset 310 311 Packet offset from Metadata in case of direct buffer 312 descriptor. This field is valid when Buf_or_ext_desc_type is 313 reset(= 0). 314 315 <legal all> 316 317 buffer_timestamp 318 319 Field only valid when 'Buffer_timestamp_valid ' is set. 320 321 322 323 Frame system entrance timestamp. The timestamp is 324 related to the global system timer 325 326 327 328 Generally the first module (SW, TCL or TQM). that sees 329 this frame and this timestamp field is not valid, shall fill 330 in this field. 331 332 333 334 Timestamp in units of 1024 us 335 336 buffer_timestamp_valid 337 338 When set, the Buffer_timestamp field contains valid 339 info. 340 341 mesh_enable 342 343 If set to 1: 344 345 * For raw WiFi frames, this indicates transmission to a 346 mesh STA, enabling the interpretation of the 'Mesh Control 347 Present' bit (bit 8) of QoS Control (otherwise this bit is 348 ignored), 349 350 * For native WiFi frames, this indicates that a 'Mesh 351 Control' field is present between the header and the LLC. 352 353 hlos_tid_overwrite 354 355 When set, TCL shall ignore the IP DSCP and VLAN PCP 356 fields and use HLOS_TID as the final TID. Otherwise TCL 357 shall consider the DSCP and PCP fields as well as HLOS_TID 358 and choose a final TID based on the configured priority 359 360 <legal all> 361 362 hlos_tid 363 364 HLOS MSDU priority 365 366 367 368 Field is used when HLOS_TID_overwrite is set. 369 370 371 372 Field is also used when HLOS_TID_overwrite is not set 373 and DSCP/PCP is not available in the packet 374 375 <legal all> 376 377 lmac_id 378 379 TCL uses this LMAC_ID in address search, i.e, while 380 finding matching entry for the packet in AST corresponding 381 to given LMAC_ID 382 383 If LMAC ID is all 1s (=> value 3), it indicates wildcard 384 match for any MAC 385 386 <legal 0-3> 387 388 reserved_4 389 390 <legal 0> 391 392 dscp_tid_table_num 393 394 DSCP to TID mapping table number that need to be used 395 for the MSDU, should be specified using this field 396 397 <legal all> 398 399 search_index 400 401 The index that will be used for index based address or 402 flow search. The field is valid when 'search_type' is 1 or 403 2. 404 405 <legal all> 406 407 cache_set_num 408 409 Cache set number that should be used to cache the index 410 based search results, for address and flow search. This 411 value should be equal to LSB four bits of the hash value of 412 match data, in case of search index points to an entry which 413 may be used in content based search also. The value can be 414 anything when the entry pointed by search index will not be 415 used for content based search. 416 417 <legal all> 418 419 reserved_5 420 421 <legal 0> 422 423 reserved_6a 424 425 <legal 0> 426 427 ring_id 428 429 The buffer pointer ring ID. 430 431 0 refers to the IDLE ring 432 433 1 - N refers to other rings 434 435 436 437 Helps with debugging when dumping ring contents. 438 439 <legal all> 440 441 looping_count 442 443 A count value that indicates the number of times the 444 producer of entries into the Ring has looped around the 445 ring. 446 447 At initialization time, this value is set to 0. On the 448 first loop, this value is set to 1. After the max value is 449 reached allowed by the number of bits for this field, the 450 count value continues with 0 again. 451 452 453 454 In case SW is the consumer of the ring entries, it can 455 use this field to figure out up to where the producer of 456 entries has created new entries. This eliminates the need to 457 check where the head pointer' of the ring is located once 458 the SW starts processing an interrupt indicating that new 459 entries have been put into this ring... 460 461 462 463 Also note that SW if it wants only needs to look at the 464 LSB bit of this count value. 465 466 <legal all> 467 */ 468 469 #define TCL_DATA_CMD_0_BUFFER_ADDR_INFO_BUF_ADDR_INFO_OFFSET 0x00000000 470 #define TCL_DATA_CMD_0_BUFFER_ADDR_INFO_BUF_ADDR_INFO_LSB 28 471 #define TCL_DATA_CMD_0_BUFFER_ADDR_INFO_BUF_ADDR_INFO_MASK 0xffffffff 472 #define TCL_DATA_CMD_1_BUFFER_ADDR_INFO_BUF_ADDR_INFO_OFFSET 0x00000004 473 #define TCL_DATA_CMD_1_BUFFER_ADDR_INFO_BUF_ADDR_INFO_LSB 28 474 #define TCL_DATA_CMD_1_BUFFER_ADDR_INFO_BUF_ADDR_INFO_MASK 0xffffffff 475 476 /* Description TCL_DATA_CMD_2_BUF_OR_EXT_DESC_TYPE 477 478 <enum 0 MSDU_buffer> The address points to an MSDU 479 buffer. 480 481 <enum 1 extension_descriptor> The address points to an 482 MSDU link extension descriptor 483 484 < legal all> 485 */ 486 #define TCL_DATA_CMD_2_BUF_OR_EXT_DESC_TYPE_OFFSET 0x00000008 487 #define TCL_DATA_CMD_2_BUF_OR_EXT_DESC_TYPE_LSB 0 488 #define TCL_DATA_CMD_2_BUF_OR_EXT_DESC_TYPE_MASK 0x00000001 489 490 /* Description TCL_DATA_CMD_2_EPD 491 492 When this bit is set then input packet is an EPD type 493 494 <legal all> 495 */ 496 #define TCL_DATA_CMD_2_EPD_OFFSET 0x00000008 497 #define TCL_DATA_CMD_2_EPD_LSB 1 498 #define TCL_DATA_CMD_2_EPD_MASK 0x00000002 499 500 /* Description TCL_DATA_CMD_2_ENCAP_TYPE 501 502 Indicates the encapsulation that HW will perform: 503 504 <enum 0 RAW> No encapsulation 505 506 <enum 1 Native_WiFi> 507 508 <enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses 509 SNAP/LLC) 510 511 <enum 3 802_3> DO NOT USE. Indicate Ethernet 512 513 514 515 Used by the OLE during encapsulation. 516 517 <legal all> 518 */ 519 #define TCL_DATA_CMD_2_ENCAP_TYPE_OFFSET 0x00000008 520 #define TCL_DATA_CMD_2_ENCAP_TYPE_LSB 2 521 #define TCL_DATA_CMD_2_ENCAP_TYPE_MASK 0x0000000c 522 523 /* Description TCL_DATA_CMD_2_ENCRYPT_TYPE 524 525 Field only valid for encap_type: RAW 526 527 528 529 Indicates type of decrypt cipher used (as defined in the 530 peer entry) 531 532 <enum 0 wep_40> WEP 40-bit 533 534 <enum 1 wep_104> WEP 104-bit 535 536 <enum 2 tkip_no_mic> TKIP without MIC 537 538 <enum 3 wep_128> WEP 128-bit 539 540 <enum 4 tkip_with_mic> TKIP with MIC 541 542 <enum 5 wapi> WAPI 543 544 <enum 6 aes_ccmp_128> AES CCMP 128 545 546 <enum 7 no_cipher> No crypto 547 548 <enum 8 aes_ccmp_256> AES CCMP 256 549 550 <enum 9 aes_gcmp_128> AES CCMP 128 551 552 <enum 10 aes_gcmp_256> AES CCMP 256 553 554 <enum 11 wapi_gcm_sm4> WAPI GCM SM4 555 556 557 558 <enum 12 wep_varied_width> DO not use... Only for higher 559 layer modules.. 560 561 <legal 0-12> 562 */ 563 #define TCL_DATA_CMD_2_ENCRYPT_TYPE_OFFSET 0x00000008 564 #define TCL_DATA_CMD_2_ENCRYPT_TYPE_LSB 4 565 #define TCL_DATA_CMD_2_ENCRYPT_TYPE_MASK 0x000000f0 566 567 /* Description TCL_DATA_CMD_2_SRC_BUFFER_SWAP 568 569 Treats source memory (packet buffer) organization as 570 big-endian. The packets are read and byte swapped. 571 572 1'b0: Source memory is little endian 573 574 1'b1: Source memory is big endian 575 576 <legal all> 577 */ 578 #define TCL_DATA_CMD_2_SRC_BUFFER_SWAP_OFFSET 0x00000008 579 #define TCL_DATA_CMD_2_SRC_BUFFER_SWAP_LSB 8 580 #define TCL_DATA_CMD_2_SRC_BUFFER_SWAP_MASK 0x00000100 581 582 /* Description TCL_DATA_CMD_2_LINK_META_SWAP 583 584 Treats link descriptor and Metadata as big-endian. The 585 link descriptor/Metadata is read and byte swapped. 586 587 1'b0: Memory is little endian 588 589 1'b1: Memory is big endian 590 591 <legal all> 592 */ 593 #define TCL_DATA_CMD_2_LINK_META_SWAP_OFFSET 0x00000008 594 #define TCL_DATA_CMD_2_LINK_META_SWAP_LSB 9 595 #define TCL_DATA_CMD_2_LINK_META_SWAP_MASK 0x00000200 596 597 /* Description TCL_DATA_CMD_2_RESERVED_2A 598 599 <legal 0> 600 */ 601 #define TCL_DATA_CMD_2_RESERVED_2A_OFFSET 0x00000008 602 #define TCL_DATA_CMD_2_RESERVED_2A_LSB 10 603 #define TCL_DATA_CMD_2_RESERVED_2A_MASK 0x00000c00 604 605 /* Description TCL_DATA_CMD_2_SEARCH_TYPE 606 607 Search type select 608 609 610 611 <enum 0 Normal_search> Address and flow search will use 612 packet contents 613 614 <enum 1 Index_based_address_search> Address search will 615 616 <enum 2 Index_based_flow_search> Flow search will use 617 'search_index', and address search will use packet contents 618 619 <legal 0-2> 620 */ 621 #define TCL_DATA_CMD_2_SEARCH_TYPE_OFFSET 0x00000008 622 #define TCL_DATA_CMD_2_SEARCH_TYPE_LSB 12 623 #define TCL_DATA_CMD_2_SEARCH_TYPE_MASK 0x00003000 624 625 /* Description TCL_DATA_CMD_2_ADDRX_EN 626 627 Address X search enable in ASE 628 629 1'b0: Search disable 630 631 1'b1: Search Enable 632 633 <legal all> 634 */ 635 #define TCL_DATA_CMD_2_ADDRX_EN_OFFSET 0x00000008 636 #define TCL_DATA_CMD_2_ADDRX_EN_LSB 14 637 #define TCL_DATA_CMD_2_ADDRX_EN_MASK 0x00004000 638 639 /* Description TCL_DATA_CMD_2_ADDRY_EN 640 641 Address Y search enable in ASE 642 643 1'b0: Search disable 644 645 1'b1: Search Enable 646 647 <legal all> 648 */ 649 #define TCL_DATA_CMD_2_ADDRY_EN_OFFSET 0x00000008 650 #define TCL_DATA_CMD_2_ADDRY_EN_LSB 15 651 #define TCL_DATA_CMD_2_ADDRY_EN_MASK 0x00008000 652 653 /* Description TCL_DATA_CMD_2_TCL_CMD_NUMBER 654 655 This number can be used by SW to track, identify and 656 link the created commands with the command statuses 657 658 659 660 Is set to the value 'TCL_CMD_Number' of the related 661 TCL_DATA command 662 663 <legal all> 664 */ 665 #define TCL_DATA_CMD_2_TCL_CMD_NUMBER_OFFSET 0x00000008 666 #define TCL_DATA_CMD_2_TCL_CMD_NUMBER_LSB 16 667 #define TCL_DATA_CMD_2_TCL_CMD_NUMBER_MASK 0xffff0000 668 669 /* Description TCL_DATA_CMD_3_DATA_LENGTH 670 671 Valid Data length in bytes. 672 673 674 675 MSDU length in case of direct descriptor. 676 677 Length of link extension descriptor in case of Link 678 extension descriptor. This is used to know the size of 679 Metadata. 680 681 <legal all> 682 */ 683 #define TCL_DATA_CMD_3_DATA_LENGTH_OFFSET 0x0000000c 684 #define TCL_DATA_CMD_3_DATA_LENGTH_LSB 0 685 #define TCL_DATA_CMD_3_DATA_LENGTH_MASK 0x0000ffff 686 687 /* Description TCL_DATA_CMD_3_IPV4_CHECKSUM_EN 688 689 OLE related control 690 691 Enable IPv4 checksum replacement 692 */ 693 #define TCL_DATA_CMD_3_IPV4_CHECKSUM_EN_OFFSET 0x0000000c 694 #define TCL_DATA_CMD_3_IPV4_CHECKSUM_EN_LSB 16 695 #define TCL_DATA_CMD_3_IPV4_CHECKSUM_EN_MASK 0x00010000 696 697 /* Description TCL_DATA_CMD_3_UDP_OVER_IPV4_CHECKSUM_EN 698 699 OLE related control 700 701 Enable UDP over IPv4 checksum replacement. UDP checksum 702 over IPv4 is optional for TCP/IP stacks. 703 */ 704 #define TCL_DATA_CMD_3_UDP_OVER_IPV4_CHECKSUM_EN_OFFSET 0x0000000c 705 #define TCL_DATA_CMD_3_UDP_OVER_IPV4_CHECKSUM_EN_LSB 17 706 #define TCL_DATA_CMD_3_UDP_OVER_IPV4_CHECKSUM_EN_MASK 0x00020000 707 708 /* Description TCL_DATA_CMD_3_UDP_OVER_IPV6_CHECKSUM_EN 709 710 OLE related control 711 712 Enable UDP over IPv6 checksum replacement. UDP checksum 713 over IPv6 is mandatory for TCP/IP stacks. 714 */ 715 #define TCL_DATA_CMD_3_UDP_OVER_IPV6_CHECKSUM_EN_OFFSET 0x0000000c 716 #define TCL_DATA_CMD_3_UDP_OVER_IPV6_CHECKSUM_EN_LSB 18 717 #define TCL_DATA_CMD_3_UDP_OVER_IPV6_CHECKSUM_EN_MASK 0x00040000 718 719 /* Description TCL_DATA_CMD_3_TCP_OVER_IPV4_CHECKSUM_EN 720 721 OLE related control 722 723 Enable TCP checksum over IPv4 replacement 724 */ 725 #define TCL_DATA_CMD_3_TCP_OVER_IPV4_CHECKSUM_EN_OFFSET 0x0000000c 726 #define TCL_DATA_CMD_3_TCP_OVER_IPV4_CHECKSUM_EN_LSB 19 727 #define TCL_DATA_CMD_3_TCP_OVER_IPV4_CHECKSUM_EN_MASK 0x00080000 728 729 /* Description TCL_DATA_CMD_3_TCP_OVER_IPV6_CHECKSUM_EN 730 731 OLE related control 732 733 Enable TCP checksum over IPv6 replacement 734 */ 735 #define TCL_DATA_CMD_3_TCP_OVER_IPV6_CHECKSUM_EN_OFFSET 0x0000000c 736 #define TCL_DATA_CMD_3_TCP_OVER_IPV6_CHECKSUM_EN_LSB 20 737 #define TCL_DATA_CMD_3_TCP_OVER_IPV6_CHECKSUM_EN_MASK 0x00100000 738 739 /* Description TCL_DATA_CMD_3_TO_FW 740 741 Forward packet to FW along with classification result. 742 The packet will not be forward to TQM when this bit is set 743 744 745 746 1'b0: Use classification result to forward the packet. 747 748 1'b1: Override classification result and forward packet 749 only to FW. 750 751 <legal all> 752 */ 753 #define TCL_DATA_CMD_3_TO_FW_OFFSET 0x0000000c 754 #define TCL_DATA_CMD_3_TO_FW_LSB 21 755 #define TCL_DATA_CMD_3_TO_FW_MASK 0x00200000 756 757 /* Description TCL_DATA_CMD_3_RESERVED_3A 758 759 <legal 0> 760 */ 761 #define TCL_DATA_CMD_3_RESERVED_3A_OFFSET 0x0000000c 762 #define TCL_DATA_CMD_3_RESERVED_3A_LSB 22 763 #define TCL_DATA_CMD_3_RESERVED_3A_MASK 0x00400000 764 765 /* Description TCL_DATA_CMD_3_PACKET_OFFSET 766 767 Packet offset from Metadata in case of direct buffer 768 descriptor. This field is valid when Buf_or_ext_desc_type is 769 reset(= 0). 770 771 <legal all> 772 */ 773 #define TCL_DATA_CMD_3_PACKET_OFFSET_OFFSET 0x0000000c 774 #define TCL_DATA_CMD_3_PACKET_OFFSET_LSB 23 775 #define TCL_DATA_CMD_3_PACKET_OFFSET_MASK 0xff800000 776 777 /* Description TCL_DATA_CMD_4_BUFFER_TIMESTAMP 778 779 Field only valid when 'Buffer_timestamp_valid ' is set. 780 781 782 783 Frame system entrance timestamp. The timestamp is 784 related to the global system timer 785 786 787 788 Generally the first module (SW, TCL or TQM). that sees 789 this frame and this timestamp field is not valid, shall fill 790 in this field. 791 792 793 794 Timestamp in units of 1024 us 795 */ 796 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_OFFSET 0x00000010 797 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_LSB 0 798 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_MASK 0x0007ffff 799 800 /* Description TCL_DATA_CMD_4_BUFFER_TIMESTAMP_VALID 801 802 When set, the Buffer_timestamp field contains valid 803 info. 804 */ 805 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_VALID_OFFSET 0x00000010 806 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_VALID_LSB 19 807 #define TCL_DATA_CMD_4_BUFFER_TIMESTAMP_VALID_MASK 0x00080000 808 809 /* Description TCL_DATA_CMD_4_MESH_ENABLE 810 811 If set to 1: 812 813 * For raw WiFi frames, this indicates transmission to a 814 mesh STA, enabling the interpretation of the 'Mesh Control 815 Present' bit (bit 8) of QoS Control (otherwise this bit is 816 ignored), 817 818 * For native WiFi frames, this indicates that a 'Mesh 819 Control' field is present between the header and the LLC. 820 */ 821 #define TCL_DATA_CMD_4_MESH_ENABLE_OFFSET 0x00000010 822 #define TCL_DATA_CMD_4_MESH_ENABLE_LSB 20 823 #define TCL_DATA_CMD_4_MESH_ENABLE_MASK 0x00100000 824 825 /* Description TCL_DATA_CMD_4_HLOS_TID_OVERWRITE 826 827 When set, TCL shall ignore the IP DSCP and VLAN PCP 828 fields and use HLOS_TID as the final TID. Otherwise TCL 829 shall consider the DSCP and PCP fields as well as HLOS_TID 830 and choose a final TID based on the configured priority 831 832 <legal all> 833 */ 834 #define TCL_DATA_CMD_4_HLOS_TID_OVERWRITE_OFFSET 0x00000010 835 #define TCL_DATA_CMD_4_HLOS_TID_OVERWRITE_LSB 21 836 #define TCL_DATA_CMD_4_HLOS_TID_OVERWRITE_MASK 0x00200000 837 838 /* Description TCL_DATA_CMD_4_HLOS_TID 839 840 HLOS MSDU priority 841 842 843 844 Field is used when HLOS_TID_overwrite is set. 845 846 847 848 Field is also used when HLOS_TID_overwrite is not set 849 and DSCP/PCP is not available in the packet 850 851 <legal all> 852 */ 853 #define TCL_DATA_CMD_4_HLOS_TID_OFFSET 0x00000010 854 #define TCL_DATA_CMD_4_HLOS_TID_LSB 22 855 #define TCL_DATA_CMD_4_HLOS_TID_MASK 0x03c00000 856 857 /* Description TCL_DATA_CMD_4_LMAC_ID 858 859 TCL uses this LMAC_ID in address search, i.e, while 860 finding matching entry for the packet in AST corresponding 861 to given LMAC_ID 862 863 If LMAC ID is all 1s (=> value 3), it indicates wildcard 864 match for any MAC 865 866 <legal 0-3> 867 */ 868 #define TCL_DATA_CMD_4_LMAC_ID_OFFSET 0x00000010 869 #define TCL_DATA_CMD_4_LMAC_ID_LSB 26 870 #define TCL_DATA_CMD_4_LMAC_ID_MASK 0x0c000000 871 872 /* Description TCL_DATA_CMD_4_RESERVED_4 873 874 <legal 0> 875 */ 876 #define TCL_DATA_CMD_4_RESERVED_4_OFFSET 0x00000010 877 #define TCL_DATA_CMD_4_RESERVED_4_LSB 28 878 #define TCL_DATA_CMD_4_RESERVED_4_MASK 0xf0000000 879 880 /* Description TCL_DATA_CMD_5_DSCP_TID_TABLE_NUM 881 882 DSCP to TID mapping table number that need to be used 883 for the MSDU, should be specified using this field 884 885 <legal all> 886 */ 887 #define TCL_DATA_CMD_5_DSCP_TID_TABLE_NUM_OFFSET 0x00000014 888 #define TCL_DATA_CMD_5_DSCP_TID_TABLE_NUM_LSB 0 889 #define TCL_DATA_CMD_5_DSCP_TID_TABLE_NUM_MASK 0x0000003f 890 891 /* Description TCL_DATA_CMD_5_SEARCH_INDEX 892 893 The index that will be used for index based address or 894 flow search. The field is valid when 'search_type' is 1 or 895 2. 896 897 <legal all> 898 */ 899 #define TCL_DATA_CMD_5_SEARCH_INDEX_OFFSET 0x00000014 900 #define TCL_DATA_CMD_5_SEARCH_INDEX_LSB 6 901 #define TCL_DATA_CMD_5_SEARCH_INDEX_MASK 0x03ffffc0 902 903 /* Description TCL_DATA_CMD_5_CACHE_SET_NUM 904 905 Cache set number that should be used to cache the index 906 based search results, for address and flow search. This 907 value should be equal to LSB four bits of the hash value of 908 match data, in case of search index points to an entry which 909 may be used in content based search also. The value can be 910 anything when the entry pointed by search index will not be 911 used for content based search. 912 913 <legal all> 914 */ 915 #define TCL_DATA_CMD_5_CACHE_SET_NUM_OFFSET 0x00000014 916 #define TCL_DATA_CMD_5_CACHE_SET_NUM_LSB 26 917 #define TCL_DATA_CMD_5_CACHE_SET_NUM_MASK 0x3c000000 918 919 /* Description TCL_DATA_CMD_5_RESERVED_5 920 921 <legal 0> 922 */ 923 #define TCL_DATA_CMD_5_RESERVED_5_OFFSET 0x00000014 924 #define TCL_DATA_CMD_5_RESERVED_5_LSB 30 925 #define TCL_DATA_CMD_5_RESERVED_5_MASK 0xc0000000 926 927 /* Description TCL_DATA_CMD_6_RESERVED_6A 928 929 <legal 0> 930 */ 931 #define TCL_DATA_CMD_6_RESERVED_6A_OFFSET 0x00000018 932 #define TCL_DATA_CMD_6_RESERVED_6A_LSB 0 933 #define TCL_DATA_CMD_6_RESERVED_6A_MASK 0x000fffff 934 935 /* Description TCL_DATA_CMD_6_RING_ID 936 937 The buffer pointer ring ID. 938 939 0 refers to the IDLE ring 940 941 1 - N refers to other rings 942 943 944 945 Helps with debugging when dumping ring contents. 946 947 <legal all> 948 */ 949 #define TCL_DATA_CMD_6_RING_ID_OFFSET 0x00000018 950 #define TCL_DATA_CMD_6_RING_ID_LSB 20 951 #define TCL_DATA_CMD_6_RING_ID_MASK 0x0ff00000 952 953 /* Description TCL_DATA_CMD_6_LOOPING_COUNT 954 955 A count value that indicates the number of times the 956 producer of entries into the Ring has looped around the 957 ring. 958 959 At initialization time, this value is set to 0. On the 960 first loop, this value is set to 1. After the max value is 961 reached allowed by the number of bits for this field, the 962 count value continues with 0 again. 963 964 965 966 In case SW is the consumer of the ring entries, it can 967 use this field to figure out up to where the producer of 968 entries has created new entries. This eliminates the need to 969 check where the head pointer' of the ring is located once 970 the SW starts processing an interrupt indicating that new 971 entries have been put into this ring... 972 973 974 975 Also note that SW if it wants only needs to look at the 976 LSB bit of this count value. 977 978 <legal all> 979 */ 980 #define TCL_DATA_CMD_6_LOOPING_COUNT_OFFSET 0x00000018 981 #define TCL_DATA_CMD_6_LOOPING_COUNT_LSB 28 982 #define TCL_DATA_CMD_6_LOOPING_COUNT_MASK 0xf0000000 983 984 985 #endif // _TCL_DATA_CMD_H_ 986