1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 3 4 #include <dt-bindings/interconnect/qcom,msm8974.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/clock/qcom,gcc-msm8974.h> 7 #include <dt-bindings/clock/qcom,mmcc-msm8974.h> 8 #include <dt-bindings/clock/qcom,rpmcc.h> 9 #include <dt-bindings/reset/qcom,gcc-msm8974.h> 10 #include <dt-bindings/gpio/gpio.h> 11 12 / { 13 #address-cells = <1>; 14 #size-cells = <1>; 15 interrupt-parent = <&intc>; 16 17 chosen { }; 18 19 clocks { 20 xo_board: xo_board { 21 compatible = "fixed-clock"; 22 #clock-cells = <0>; 23 clock-frequency = <19200000>; 24 }; 25 26 sleep_clk: sleep_clk { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <32768>; 30 }; 31 }; 32 33 cpus { 34 #address-cells = <1>; 35 #size-cells = <0>; 36 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 37 38 CPU0: cpu@0 { 39 compatible = "qcom,krait"; 40 enable-method = "qcom,kpss-acc-v2"; 41 device_type = "cpu"; 42 reg = <0>; 43 next-level-cache = <&L2>; 44 qcom,acc = <&acc0>; 45 qcom,saw = <&saw0>; 46 cpu-idle-states = <&CPU_SPC>; 47 }; 48 49 CPU1: cpu@1 { 50 compatible = "qcom,krait"; 51 enable-method = "qcom,kpss-acc-v2"; 52 device_type = "cpu"; 53 reg = <1>; 54 next-level-cache = <&L2>; 55 qcom,acc = <&acc1>; 56 qcom,saw = <&saw1>; 57 cpu-idle-states = <&CPU_SPC>; 58 }; 59 60 CPU2: cpu@2 { 61 compatible = "qcom,krait"; 62 enable-method = "qcom,kpss-acc-v2"; 63 device_type = "cpu"; 64 reg = <2>; 65 next-level-cache = <&L2>; 66 qcom,acc = <&acc2>; 67 qcom,saw = <&saw2>; 68 cpu-idle-states = <&CPU_SPC>; 69 }; 70 71 CPU3: cpu@3 { 72 compatible = "qcom,krait"; 73 enable-method = "qcom,kpss-acc-v2"; 74 device_type = "cpu"; 75 reg = <3>; 76 next-level-cache = <&L2>; 77 qcom,acc = <&acc3>; 78 qcom,saw = <&saw3>; 79 cpu-idle-states = <&CPU_SPC>; 80 }; 81 82 L2: l2-cache { 83 compatible = "cache"; 84 cache-level = <2>; 85 cache-unified; 86 qcom,saw = <&saw_l2>; 87 }; 88 89 idle-states { 90 CPU_SPC: cpu-spc { 91 compatible = "qcom,idle-state-spc", 92 "arm,idle-state"; 93 entry-latency-us = <150>; 94 exit-latency-us = <200>; 95 min-residency-us = <2000>; 96 }; 97 }; 98 }; 99 100 firmware { 101 scm { 102 compatible = "qcom,scm-msm8974", "qcom,scm"; 103 clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; 104 clock-names = "core", "bus", "iface"; 105 }; 106 }; 107 108 memory@0 { 109 device_type = "memory"; 110 reg = <0x0 0x0>; 111 }; 112 113 pmu { 114 compatible = "qcom,krait-pmu"; 115 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 116 }; 117 118 rpm: remoteproc { 119 compatible = "qcom,msm8974-rpm-proc", "qcom,rpm-proc"; 120 121 master-stats { 122 compatible = "qcom,rpm-master-stats"; 123 qcom,rpm-msg-ram = <&apss_master_stats>, 124 <&mpss_master_stats>, 125 <&lpss_master_stats>, 126 <&pronto_master_stats>; 127 qcom,master-names = "APSS", 128 "MPSS", 129 "LPSS", 130 "PRONTO"; 131 }; 132 133 smd-edge { 134 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 135 mboxes = <&apcs 0>; 136 qcom,smd-edge = <15>; 137 138 rpm_requests: rpm-requests { 139 compatible = "qcom,rpm-msm8974", "qcom,smd-rpm"; 140 qcom,smd-channels = "rpm_requests"; 141 142 rpmcc: clock-controller { 143 compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; 144 #clock-cells = <1>; 145 clocks = <&xo_board>; 146 clock-names = "xo"; 147 }; 148 }; 149 }; 150 }; 151 152 reserved_memory: reserved-memory { 153 #address-cells = <1>; 154 #size-cells = <1>; 155 ranges; 156 157 mpss_region: mpss@8000000 { 158 reg = <0x08000000 0x5100000>; 159 no-map; 160 }; 161 162 mba_region: mba@d100000 { 163 reg = <0x0d100000 0x100000>; 164 no-map; 165 }; 166 167 wcnss_region: wcnss@d200000 { 168 reg = <0x0d200000 0xa00000>; 169 no-map; 170 }; 171 172 adsp_region: adsp@dc00000 { 173 reg = <0x0dc00000 0x1900000>; 174 no-map; 175 }; 176 177 venus_region: memory@f500000 { 178 reg = <0x0f500000 0x500000>; 179 no-map; 180 }; 181 182 smem_region: smem@fa00000 { 183 reg = <0xfa00000 0x200000>; 184 no-map; 185 }; 186 187 tz_region: memory@fc00000 { 188 reg = <0x0fc00000 0x160000>; 189 no-map; 190 }; 191 192 rfsa_mem: memory@fd60000 { 193 reg = <0x0fd60000 0x20000>; 194 no-map; 195 }; 196 197 rmtfs@fd80000 { 198 compatible = "qcom,rmtfs-mem"; 199 reg = <0x0fd80000 0x180000>; 200 no-map; 201 202 qcom,client-id = <1>; 203 }; 204 }; 205 206 smem { 207 compatible = "qcom,smem"; 208 209 memory-region = <&smem_region>; 210 qcom,rpm-msg-ram = <&rpm_msg_ram>; 211 212 hwlocks = <&tcsr_mutex 3>; 213 }; 214 215 smp2p-adsp { 216 compatible = "qcom,smp2p"; 217 qcom,smem = <443>, <429>; 218 219 interrupt-parent = <&intc>; 220 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; 221 222 mboxes = <&apcs 10>; 223 224 qcom,local-pid = <0>; 225 qcom,remote-pid = <2>; 226 227 adsp_smp2p_out: master-kernel { 228 qcom,entry-name = "master-kernel"; 229 #qcom,smem-state-cells = <1>; 230 }; 231 232 adsp_smp2p_in: slave-kernel { 233 qcom,entry-name = "slave-kernel"; 234 235 interrupt-controller; 236 #interrupt-cells = <2>; 237 }; 238 }; 239 240 smp2p-modem { 241 compatible = "qcom,smp2p"; 242 qcom,smem = <435>, <428>; 243 244 interrupt-parent = <&intc>; 245 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; 246 247 mboxes = <&apcs 14>; 248 249 qcom,local-pid = <0>; 250 qcom,remote-pid = <1>; 251 252 modem_smp2p_out: master-kernel { 253 qcom,entry-name = "master-kernel"; 254 #qcom,smem-state-cells = <1>; 255 }; 256 257 modem_smp2p_in: slave-kernel { 258 qcom,entry-name = "slave-kernel"; 259 260 interrupt-controller; 261 #interrupt-cells = <2>; 262 }; 263 }; 264 265 smp2p-wcnss { 266 compatible = "qcom,smp2p"; 267 qcom,smem = <451>, <431>; 268 269 interrupt-parent = <&intc>; 270 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 271 272 mboxes = <&apcs 18>; 273 274 qcom,local-pid = <0>; 275 qcom,remote-pid = <4>; 276 277 wcnss_smp2p_out: master-kernel { 278 qcom,entry-name = "master-kernel"; 279 280 #qcom,smem-state-cells = <1>; 281 }; 282 283 wcnss_smp2p_in: slave-kernel { 284 qcom,entry-name = "slave-kernel"; 285 286 interrupt-controller; 287 #interrupt-cells = <2>; 288 }; 289 }; 290 291 smsm { 292 compatible = "qcom,smsm"; 293 294 #address-cells = <1>; 295 #size-cells = <0>; 296 297 mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; 298 299 apps_smsm: apps@0 { 300 reg = <0>; 301 302 #qcom,smem-state-cells = <1>; 303 }; 304 305 modem_smsm: modem@1 { 306 reg = <1>; 307 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 308 309 interrupt-controller; 310 #interrupt-cells = <2>; 311 }; 312 313 adsp_smsm: adsp@2 { 314 reg = <2>; 315 interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; 316 317 interrupt-controller; 318 #interrupt-cells = <2>; 319 }; 320 321 wcnss_smsm: wcnss@7 { 322 reg = <7>; 323 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; 324 325 interrupt-controller; 326 #interrupt-cells = <2>; 327 }; 328 }; 329 330 soc: soc { 331 #address-cells = <1>; 332 #size-cells = <1>; 333 ranges; 334 compatible = "simple-bus"; 335 336 intc: interrupt-controller@f9000000 { 337 compatible = "qcom,msm-qgic2"; 338 interrupt-controller; 339 #interrupt-cells = <3>; 340 reg = <0xf9000000 0x1000>, 341 <0xf9002000 0x1000>; 342 }; 343 344 apcs: mailbox@f9011000 { 345 compatible = "qcom,msm8974-apcs-kpss-global", 346 "qcom,msm8994-apcs-kpss-global", "syscon"; 347 reg = <0xf9011000 0x1000>; 348 #mbox-cells = <1>; 349 }; 350 351 saw_l2: power-manager@f9012000 { 352 compatible = "qcom,msm8974-saw2-v2.1-l2", "qcom,saw2"; 353 reg = <0xf9012000 0x1000>; 354 }; 355 356 watchdog@f9017000 { 357 compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt"; 358 reg = <0xf9017000 0x1000>; 359 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, 360 <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; 361 clocks = <&sleep_clk>; 362 }; 363 364 timer@f9020000 { 365 #address-cells = <1>; 366 #size-cells = <1>; 367 ranges; 368 compatible = "arm,armv7-timer-mem"; 369 reg = <0xf9020000 0x1000>; 370 clock-frequency = <19200000>; 371 372 frame@f9021000 { 373 frame-number = <0>; 374 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 375 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 376 reg = <0xf9021000 0x1000>, 377 <0xf9022000 0x1000>; 378 }; 379 380 frame@f9023000 { 381 frame-number = <1>; 382 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 383 reg = <0xf9023000 0x1000>; 384 status = "disabled"; 385 }; 386 387 frame@f9024000 { 388 frame-number = <2>; 389 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 390 reg = <0xf9024000 0x1000>; 391 status = "disabled"; 392 }; 393 394 frame@f9025000 { 395 frame-number = <3>; 396 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 397 reg = <0xf9025000 0x1000>; 398 status = "disabled"; 399 }; 400 401 frame@f9026000 { 402 frame-number = <4>; 403 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 404 reg = <0xf9026000 0x1000>; 405 status = "disabled"; 406 }; 407 408 frame@f9027000 { 409 frame-number = <5>; 410 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 411 reg = <0xf9027000 0x1000>; 412 status = "disabled"; 413 }; 414 415 frame@f9028000 { 416 frame-number = <6>; 417 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 418 reg = <0xf9028000 0x1000>; 419 status = "disabled"; 420 }; 421 }; 422 423 acc0: power-manager@f9088000 { 424 compatible = "qcom,kpss-acc-v2"; 425 reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; 426 }; 427 428 saw0: power-manager@f9089000 { 429 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 430 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; 431 }; 432 433 acc1: power-manager@f9098000 { 434 compatible = "qcom,kpss-acc-v2"; 435 reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; 436 }; 437 438 saw1: power-manager@f9099000 { 439 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 440 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; 441 }; 442 443 acc2: power-manager@f90a8000 { 444 compatible = "qcom,kpss-acc-v2"; 445 reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; 446 }; 447 448 saw2: power-manager@f90a9000 { 449 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 450 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; 451 }; 452 453 acc3: power-manager@f90b8000 { 454 compatible = "qcom,kpss-acc-v2"; 455 reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; 456 }; 457 458 saw3: power-manager@f90b9000 { 459 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 460 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; 461 }; 462 463 sdhc_1: mmc@f9824900 { 464 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 465 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; 466 reg-names = "hc", "core"; 467 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 468 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 469 interrupt-names = "hc_irq", "pwr_irq"; 470 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 471 <&gcc GCC_SDCC1_APPS_CLK>, 472 <&xo_board>; 473 clock-names = "iface", "core", "xo"; 474 bus-width = <8>; 475 non-removable; 476 477 status = "disabled"; 478 }; 479 480 sdhc_3: mmc@f9864900 { 481 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 482 reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; 483 reg-names = "hc", "core"; 484 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, 485 <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; 486 interrupt-names = "hc_irq", "pwr_irq"; 487 clocks = <&gcc GCC_SDCC3_AHB_CLK>, 488 <&gcc GCC_SDCC3_APPS_CLK>, 489 <&xo_board>; 490 clock-names = "iface", "core", "xo"; 491 bus-width = <4>; 492 493 #address-cells = <1>; 494 #size-cells = <0>; 495 496 status = "disabled"; 497 }; 498 499 sdhc_2: mmc@f98a4900 { 500 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 501 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; 502 reg-names = "hc", "core"; 503 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 504 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 505 interrupt-names = "hc_irq", "pwr_irq"; 506 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 507 <&gcc GCC_SDCC2_APPS_CLK>, 508 <&xo_board>; 509 clock-names = "iface", "core", "xo"; 510 bus-width = <4>; 511 512 #address-cells = <1>; 513 #size-cells = <0>; 514 515 status = "disabled"; 516 }; 517 518 blsp1_uart1: serial@f991d000 { 519 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 520 reg = <0xf991d000 0x1000>; 521 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 522 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 523 clock-names = "core", "iface"; 524 status = "disabled"; 525 }; 526 527 blsp1_uart2: serial@f991e000 { 528 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 529 reg = <0xf991e000 0x1000>; 530 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 531 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 532 clock-names = "core", "iface"; 533 pinctrl-names = "default"; 534 pinctrl-0 = <&blsp1_uart2_default>; 535 status = "disabled"; 536 }; 537 538 blsp1_i2c1: i2c@f9923000 { 539 status = "disabled"; 540 compatible = "qcom,i2c-qup-v2.1.1"; 541 reg = <0xf9923000 0x1000>; 542 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 543 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 544 clock-names = "core", "iface"; 545 pinctrl-names = "default", "sleep"; 546 pinctrl-0 = <&blsp1_i2c1_default>; 547 pinctrl-1 = <&blsp1_i2c1_sleep>; 548 #address-cells = <1>; 549 #size-cells = <0>; 550 }; 551 552 blsp1_i2c2: i2c@f9924000 { 553 status = "disabled"; 554 compatible = "qcom,i2c-qup-v2.1.1"; 555 reg = <0xf9924000 0x1000>; 556 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 557 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 558 clock-names = "core", "iface"; 559 pinctrl-names = "default", "sleep"; 560 pinctrl-0 = <&blsp1_i2c2_default>; 561 pinctrl-1 = <&blsp1_i2c2_sleep>; 562 #address-cells = <1>; 563 #size-cells = <0>; 564 }; 565 566 blsp1_i2c3: i2c@f9925000 { 567 status = "disabled"; 568 compatible = "qcom,i2c-qup-v2.1.1"; 569 reg = <0xf9925000 0x1000>; 570 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 571 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 572 clock-names = "core", "iface"; 573 pinctrl-names = "default", "sleep"; 574 pinctrl-0 = <&blsp1_i2c3_default>; 575 pinctrl-1 = <&blsp1_i2c3_sleep>; 576 #address-cells = <1>; 577 #size-cells = <0>; 578 }; 579 580 blsp1_i2c6: i2c@f9928000 { 581 status = "disabled"; 582 compatible = "qcom,i2c-qup-v2.1.1"; 583 reg = <0xf9928000 0x1000>; 584 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 585 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 586 clock-names = "core", "iface"; 587 pinctrl-names = "default", "sleep"; 588 pinctrl-0 = <&blsp1_i2c6_default>; 589 pinctrl-1 = <&blsp1_i2c6_sleep>; 590 #address-cells = <1>; 591 #size-cells = <0>; 592 }; 593 594 blsp2_dma: dma-controller@f9944000 { 595 compatible = "qcom,bam-v1.4.0"; 596 reg = <0xf9944000 0x19000>; 597 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; 598 clocks = <&gcc GCC_BLSP2_AHB_CLK>; 599 clock-names = "bam_clk"; 600 #dma-cells = <1>; 601 qcom,ee = <0>; 602 }; 603 604 blsp2_uart1: serial@f995d000 { 605 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 606 reg = <0xf995d000 0x1000>; 607 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; 608 clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 609 clock-names = "core", "iface"; 610 pinctrl-names = "default", "sleep"; 611 pinctrl-0 = <&blsp2_uart1_default>; 612 pinctrl-1 = <&blsp2_uart1_sleep>; 613 status = "disabled"; 614 }; 615 616 blsp2_uart2: serial@f995e000 { 617 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 618 reg = <0xf995e000 0x1000>; 619 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 620 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 621 clock-names = "core", "iface"; 622 status = "disabled"; 623 }; 624 625 blsp2_uart4: serial@f9960000 { 626 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 627 reg = <0xf9960000 0x1000>; 628 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; 629 clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 630 clock-names = "core", "iface"; 631 pinctrl-names = "default"; 632 pinctrl-0 = <&blsp2_uart4_default>; 633 status = "disabled"; 634 }; 635 636 blsp2_i2c2: i2c@f9964000 { 637 status = "disabled"; 638 compatible = "qcom,i2c-qup-v2.1.1"; 639 reg = <0xf9964000 0x1000>; 640 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; 641 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 642 clock-names = "core", "iface"; 643 pinctrl-names = "default", "sleep"; 644 pinctrl-0 = <&blsp2_i2c2_default>; 645 pinctrl-1 = <&blsp2_i2c2_sleep>; 646 #address-cells = <1>; 647 #size-cells = <0>; 648 }; 649 650 blsp2_i2c5: i2c@f9967000 { 651 status = "disabled"; 652 compatible = "qcom,i2c-qup-v2.1.1"; 653 reg = <0xf9967000 0x1000>; 654 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 655 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 656 clock-names = "core", "iface"; 657 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; 658 dma-names = "tx", "rx"; 659 pinctrl-names = "default", "sleep"; 660 pinctrl-0 = <&blsp2_i2c5_default>; 661 pinctrl-1 = <&blsp2_i2c5_sleep>; 662 #address-cells = <1>; 663 #size-cells = <0>; 664 }; 665 666 blsp2_i2c6: i2c@f9968000 { 667 status = "disabled"; 668 compatible = "qcom,i2c-qup-v2.1.1"; 669 reg = <0xf9968000 0x1000>; 670 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 671 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 672 clock-names = "core", "iface"; 673 pinctrl-names = "default", "sleep"; 674 pinctrl-0 = <&blsp2_i2c6_default>; 675 pinctrl-1 = <&blsp2_i2c6_sleep>; 676 #address-cells = <1>; 677 #size-cells = <0>; 678 }; 679 680 usb: usb@f9a55000 { 681 compatible = "qcom,ci-hdrc"; 682 reg = <0xf9a55000 0x200>, 683 <0xf9a55200 0x200>; 684 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; 685 clocks = <&gcc GCC_USB_HS_AHB_CLK>, 686 <&gcc GCC_USB_HS_SYSTEM_CLK>; 687 clock-names = "iface", "core"; 688 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; 689 assigned-clock-rates = <75000000>; 690 resets = <&gcc GCC_USB_HS_BCR>; 691 reset-names = "core"; 692 phy_type = "ulpi"; 693 dr_mode = "otg"; 694 ahb-burst-config = <0>; 695 phy-names = "usb-phy"; 696 status = "disabled"; 697 #reset-cells = <1>; 698 699 ulpi { 700 usb_hs1_phy: phy-0 { 701 compatible = "qcom,usb-hs-phy-msm8974", 702 "qcom,usb-hs-phy"; 703 #phy-cells = <0>; 704 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 705 clock-names = "ref", "sleep"; 706 resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; 707 reset-names = "phy", "por"; 708 status = "disabled"; 709 }; 710 711 usb_hs2_phy: phy-1 { 712 compatible = "qcom,usb-hs-phy-msm8974", 713 "qcom,usb-hs-phy"; 714 #phy-cells = <0>; 715 clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; 716 clock-names = "ref", "sleep"; 717 resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>; 718 reset-names = "phy", "por"; 719 status = "disabled"; 720 }; 721 }; 722 }; 723 724 rng@f9bff000 { 725 compatible = "qcom,prng"; 726 reg = <0xf9bff000 0x200>; 727 clocks = <&gcc GCC_PRNG_AHB_CLK>; 728 clock-names = "core"; 729 }; 730 731 pronto: remoteproc@fb204000 { 732 compatible = "qcom,pronto-v2-pil", "qcom,pronto"; 733 reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; 734 reg-names = "ccu", "dxe", "pmu"; 735 736 memory-region = <&wcnss_region>; 737 738 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, 739 <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 740 <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 741 <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 742 <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 743 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 744 745 qcom,smem-states = <&wcnss_smp2p_out 0>; 746 qcom,smem-state-names = "stop"; 747 748 status = "disabled"; 749 750 iris { 751 compatible = "qcom,wcn3680"; 752 753 clocks = <&rpmcc RPM_SMD_CXO_A2>; 754 clock-names = "xo"; 755 }; 756 757 smd-edge { 758 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; 759 760 mboxes = <&apcs 17>; 761 qcom,smd-edge = <6>; 762 763 wcnss { 764 compatible = "qcom,wcnss"; 765 qcom,smd-channels = "WCNSS_CTRL"; 766 status = "disabled"; 767 768 qcom,mmio = <&pronto>; 769 770 bluetooth { 771 compatible = "qcom,wcnss-bt"; 772 }; 773 774 wifi { 775 compatible = "qcom,wcnss-wlan"; 776 777 interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, 778 <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; 779 interrupt-names = "tx", "rx"; 780 781 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; 782 qcom,smem-state-names = "tx-enable", 783 "tx-rings-empty"; 784 }; 785 }; 786 }; 787 }; 788 789 sram@fc190000 { 790 compatible = "qcom,msm8974-rpm-stats"; 791 reg = <0xfc190000 0x10000>; 792 }; 793 794 etf@fc307000 { 795 compatible = "arm,coresight-tmc", "arm,primecell"; 796 reg = <0xfc307000 0x1000>; 797 798 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 799 clock-names = "apb_pclk", "atclk"; 800 801 out-ports { 802 port { 803 etf_out: endpoint { 804 remote-endpoint = <&replicator_in>; 805 }; 806 }; 807 }; 808 809 in-ports { 810 port { 811 etf_in: endpoint { 812 remote-endpoint = <&merger_out>; 813 }; 814 }; 815 }; 816 }; 817 818 tpiu@fc318000 { 819 compatible = "arm,coresight-tpiu", "arm,primecell"; 820 reg = <0xfc318000 0x1000>; 821 822 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 823 clock-names = "apb_pclk", "atclk"; 824 825 in-ports { 826 port { 827 tpiu_in: endpoint { 828 remote-endpoint = <&replicator_out1>; 829 }; 830 }; 831 }; 832 }; 833 834 funnel@fc31a000 { 835 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 836 reg = <0xfc31a000 0x1000>; 837 838 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 839 clock-names = "apb_pclk", "atclk"; 840 841 in-ports { 842 #address-cells = <1>; 843 #size-cells = <0>; 844 845 /* 846 * Not described input ports: 847 * 0 - not-connected 848 * 1 - connected trought funnel to Multimedia CPU 849 * 2 - connected to Wireless CPU 850 * 3 - not-connected 851 * 4 - not-connected 852 * 6 - not-connected 853 * 7 - connected to STM 854 */ 855 port@5 { 856 reg = <5>; 857 funnel1_in5: endpoint { 858 remote-endpoint = <&kpss_out>; 859 }; 860 }; 861 }; 862 863 out-ports { 864 port { 865 funnel1_out: endpoint { 866 remote-endpoint = <&merger_in1>; 867 }; 868 }; 869 }; 870 }; 871 872 funnel@fc31b000 { 873 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 874 reg = <0xfc31b000 0x1000>; 875 876 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 877 clock-names = "apb_pclk", "atclk"; 878 879 in-ports { 880 #address-cells = <1>; 881 #size-cells = <0>; 882 883 /* 884 * Not described input ports: 885 * 0 - connected trought funnel to Audio, Modem and 886 * Resource and Power Manager CPU's 887 * 2...7 - not-connected 888 */ 889 port@1 { 890 reg = <1>; 891 merger_in1: endpoint { 892 remote-endpoint = <&funnel1_out>; 893 }; 894 }; 895 }; 896 897 out-ports { 898 port { 899 merger_out: endpoint { 900 remote-endpoint = <&etf_in>; 901 }; 902 }; 903 }; 904 }; 905 906 replicator@fc31c000 { 907 compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; 908 reg = <0xfc31c000 0x1000>; 909 910 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 911 clock-names = "apb_pclk", "atclk"; 912 913 out-ports { 914 #address-cells = <1>; 915 #size-cells = <0>; 916 917 port@0 { 918 reg = <0>; 919 replicator_out0: endpoint { 920 remote-endpoint = <&etr_in>; 921 }; 922 }; 923 port@1 { 924 reg = <1>; 925 replicator_out1: endpoint { 926 remote-endpoint = <&tpiu_in>; 927 }; 928 }; 929 }; 930 931 in-ports { 932 port { 933 replicator_in: endpoint { 934 remote-endpoint = <&etf_out>; 935 }; 936 }; 937 }; 938 }; 939 940 etr@fc322000 { 941 compatible = "arm,coresight-tmc", "arm,primecell"; 942 reg = <0xfc322000 0x1000>; 943 944 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 945 clock-names = "apb_pclk", "atclk"; 946 947 in-ports { 948 port { 949 etr_in: endpoint { 950 remote-endpoint = <&replicator_out0>; 951 }; 952 }; 953 }; 954 }; 955 956 etm@fc33c000 { 957 compatible = "arm,coresight-etm4x", "arm,primecell"; 958 reg = <0xfc33c000 0x1000>; 959 960 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 961 clock-names = "apb_pclk", "atclk"; 962 963 cpu = <&CPU0>; 964 965 out-ports { 966 port { 967 etm0_out: endpoint { 968 remote-endpoint = <&kpss_in0>; 969 }; 970 }; 971 }; 972 }; 973 974 etm@fc33d000 { 975 compatible = "arm,coresight-etm4x", "arm,primecell"; 976 reg = <0xfc33d000 0x1000>; 977 978 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 979 clock-names = "apb_pclk", "atclk"; 980 981 cpu = <&CPU1>; 982 983 out-ports { 984 port { 985 etm1_out: endpoint { 986 remote-endpoint = <&kpss_in1>; 987 }; 988 }; 989 }; 990 }; 991 992 etm@fc33e000 { 993 compatible = "arm,coresight-etm4x", "arm,primecell"; 994 reg = <0xfc33e000 0x1000>; 995 996 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 997 clock-names = "apb_pclk", "atclk"; 998 999 cpu = <&CPU2>; 1000 1001 out-ports { 1002 port { 1003 etm2_out: endpoint { 1004 remote-endpoint = <&kpss_in2>; 1005 }; 1006 }; 1007 }; 1008 }; 1009 1010 etm@fc33f000 { 1011 compatible = "arm,coresight-etm4x", "arm,primecell"; 1012 reg = <0xfc33f000 0x1000>; 1013 1014 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 1015 clock-names = "apb_pclk", "atclk"; 1016 1017 cpu = <&CPU3>; 1018 1019 out-ports { 1020 port { 1021 etm3_out: endpoint { 1022 remote-endpoint = <&kpss_in3>; 1023 }; 1024 }; 1025 }; 1026 }; 1027 1028 /* KPSS funnel, only 4 inputs are used */ 1029 funnel@fc345000 { 1030 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 1031 reg = <0xfc345000 0x1000>; 1032 1033 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 1034 clock-names = "apb_pclk", "atclk"; 1035 1036 in-ports { 1037 #address-cells = <1>; 1038 #size-cells = <0>; 1039 1040 port@0 { 1041 reg = <0>; 1042 kpss_in0: endpoint { 1043 remote-endpoint = <&etm0_out>; 1044 }; 1045 }; 1046 port@1 { 1047 reg = <1>; 1048 kpss_in1: endpoint { 1049 remote-endpoint = <&etm1_out>; 1050 }; 1051 }; 1052 port@2 { 1053 reg = <2>; 1054 kpss_in2: endpoint { 1055 remote-endpoint = <&etm2_out>; 1056 }; 1057 }; 1058 port@3 { 1059 reg = <3>; 1060 kpss_in3: endpoint { 1061 remote-endpoint = <&etm3_out>; 1062 }; 1063 }; 1064 }; 1065 1066 out-ports { 1067 port { 1068 kpss_out: endpoint { 1069 remote-endpoint = <&funnel1_in5>; 1070 }; 1071 }; 1072 }; 1073 }; 1074 1075 bimc: interconnect@fc380000 { 1076 reg = <0xfc380000 0x6a000>; 1077 compatible = "qcom,msm8974-bimc"; 1078 #interconnect-cells = <1>; 1079 clock-names = "bus", "bus_a"; 1080 clocks = <&rpmcc RPM_SMD_BIMC_CLK>, 1081 <&rpmcc RPM_SMD_BIMC_A_CLK>; 1082 }; 1083 1084 gcc: clock-controller@fc400000 { 1085 compatible = "qcom,gcc-msm8974"; 1086 #clock-cells = <1>; 1087 #reset-cells = <1>; 1088 #power-domain-cells = <1>; 1089 reg = <0xfc400000 0x4000>; 1090 1091 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 1092 <&sleep_clk>; 1093 clock-names = "xo", 1094 "sleep_clk"; 1095 }; 1096 1097 rpm_msg_ram: sram@fc428000 { 1098 compatible = "qcom,rpm-msg-ram"; 1099 reg = <0xfc428000 0x4000>; 1100 1101 #address-cells = <1>; 1102 #size-cells = <1>; 1103 ranges = <0 0xfc428000 0x4000>; 1104 1105 apss_master_stats: sram@150 { 1106 reg = <0x150 0x14>; 1107 }; 1108 1109 mpss_master_stats: sram@b50 { 1110 reg = <0xb50 0x14>; 1111 }; 1112 1113 lpss_master_stats: sram@1550 { 1114 reg = <0x1550 0x14>; 1115 }; 1116 1117 pronto_master_stats: sram@1f50 { 1118 reg = <0x1f50 0x14>; 1119 }; 1120 }; 1121 1122 snoc: interconnect@fc460000 { 1123 reg = <0xfc460000 0x4000>; 1124 compatible = "qcom,msm8974-snoc"; 1125 #interconnect-cells = <1>; 1126 clock-names = "bus", "bus_a"; 1127 clocks = <&rpmcc RPM_SMD_SNOC_CLK>, 1128 <&rpmcc RPM_SMD_SNOC_A_CLK>; 1129 }; 1130 1131 pnoc: interconnect@fc468000 { 1132 reg = <0xfc468000 0x4000>; 1133 compatible = "qcom,msm8974-pnoc"; 1134 #interconnect-cells = <1>; 1135 clock-names = "bus", "bus_a"; 1136 clocks = <&rpmcc RPM_SMD_PNOC_CLK>, 1137 <&rpmcc RPM_SMD_PNOC_A_CLK>; 1138 }; 1139 1140 ocmemnoc: interconnect@fc470000 { 1141 reg = <0xfc470000 0x4000>; 1142 compatible = "qcom,msm8974-ocmemnoc"; 1143 #interconnect-cells = <1>; 1144 clock-names = "bus", "bus_a"; 1145 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, 1146 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; 1147 }; 1148 1149 mmssnoc: interconnect@fc478000 { 1150 reg = <0xfc478000 0x4000>; 1151 compatible = "qcom,msm8974-mmssnoc"; 1152 #interconnect-cells = <1>; 1153 clock-names = "bus", "bus_a"; 1154 clocks = <&mmcc MMSS_S0_AXI_CLK>, 1155 <&mmcc MMSS_S0_AXI_CLK>; 1156 }; 1157 1158 cnoc: interconnect@fc480000 { 1159 reg = <0xfc480000 0x4000>; 1160 compatible = "qcom,msm8974-cnoc"; 1161 #interconnect-cells = <1>; 1162 clock-names = "bus", "bus_a"; 1163 clocks = <&rpmcc RPM_SMD_CNOC_CLK>, 1164 <&rpmcc RPM_SMD_CNOC_A_CLK>; 1165 }; 1166 1167 tsens: thermal-sensor@fc4a9000 { 1168 compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; 1169 reg = <0xfc4a9000 0x1000>, /* TM */ 1170 <0xfc4a8000 0x1000>; /* SROT */ 1171 nvmem-cells = <&tsens_mode>, 1172 <&tsens_base1>, <&tsens_base2>, 1173 <&tsens_use_backup>, 1174 <&tsens_mode_backup>, 1175 <&tsens_base1_backup>, <&tsens_base2_backup>, 1176 <&tsens_s0_p1>, <&tsens_s0_p2>, 1177 <&tsens_s1_p1>, <&tsens_s1_p2>, 1178 <&tsens_s2_p1>, <&tsens_s2_p2>, 1179 <&tsens_s3_p1>, <&tsens_s3_p2>, 1180 <&tsens_s4_p1>, <&tsens_s4_p2>, 1181 <&tsens_s5_p1>, <&tsens_s5_p2>, 1182 <&tsens_s6_p1>, <&tsens_s6_p2>, 1183 <&tsens_s7_p1>, <&tsens_s7_p2>, 1184 <&tsens_s8_p1>, <&tsens_s8_p2>, 1185 <&tsens_s9_p1>, <&tsens_s9_p2>, 1186 <&tsens_s10_p1>, <&tsens_s10_p2>, 1187 <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, 1188 <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, 1189 <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, 1190 <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, 1191 <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, 1192 <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, 1193 <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, 1194 <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, 1195 <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, 1196 <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, 1197 <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; 1198 nvmem-cell-names = "mode", 1199 "base1", "base2", 1200 "use_backup", 1201 "mode_backup", 1202 "base1_backup", "base2_backup", 1203 "s0_p1", "s0_p2", 1204 "s1_p1", "s1_p2", 1205 "s2_p1", "s2_p2", 1206 "s3_p1", "s3_p2", 1207 "s4_p1", "s4_p2", 1208 "s5_p1", "s5_p2", 1209 "s6_p1", "s6_p2", 1210 "s7_p1", "s7_p2", 1211 "s8_p1", "s8_p2", 1212 "s9_p1", "s9_p2", 1213 "s10_p1", "s10_p2", 1214 "s0_p1_backup", "s0_p2_backup", 1215 "s1_p1_backup", "s1_p2_backup", 1216 "s2_p1_backup", "s2_p2_backup", 1217 "s3_p1_backup", "s3_p2_backup", 1218 "s4_p1_backup", "s4_p2_backup", 1219 "s5_p1_backup", "s5_p2_backup", 1220 "s6_p1_backup", "s6_p2_backup", 1221 "s7_p1_backup", "s7_p2_backup", 1222 "s8_p1_backup", "s8_p2_backup", 1223 "s9_p1_backup", "s9_p2_backup", 1224 "s10_p1_backup", "s10_p2_backup"; 1225 #qcom,sensors = <11>; 1226 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 1227 interrupt-names = "uplow"; 1228 #thermal-sensor-cells = <1>; 1229 }; 1230 1231 restart@fc4ab000 { 1232 compatible = "qcom,pshold"; 1233 reg = <0xfc4ab000 0x4>; 1234 }; 1235 1236 qfprom: efuse@fc4bc000 { 1237 compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; 1238 reg = <0xfc4bc000 0x2100>; 1239 #address-cells = <1>; 1240 #size-cells = <1>; 1241 1242 tsens_base1: base1@d0 { 1243 reg = <0xd0 0x1>; 1244 bits = <0 8>; 1245 }; 1246 1247 tsens_s0_p1: s0-p1@d1 { 1248 reg = <0xd1 0x1>; 1249 bits = <0 6>; 1250 }; 1251 1252 tsens_s1_p1: s1-p1@d2 { 1253 reg = <0xd1 0x2>; 1254 bits = <6 6>; 1255 }; 1256 1257 tsens_s2_p1: s2-p1@d2 { 1258 reg = <0xd2 0x2>; 1259 bits = <4 6>; 1260 }; 1261 1262 tsens_s3_p1: s3-p1@d3 { 1263 reg = <0xd3 0x1>; 1264 bits = <2 6>; 1265 }; 1266 1267 tsens_s4_p1: s4-p1@d4 { 1268 reg = <0xd4 0x1>; 1269 bits = <0 6>; 1270 }; 1271 1272 tsens_s5_p1: s5-p1@d4 { 1273 reg = <0xd4 0x2>; 1274 bits = <6 6>; 1275 }; 1276 1277 tsens_s6_p1: s6-p1@d5 { 1278 reg = <0xd5 0x2>; 1279 bits = <4 6>; 1280 }; 1281 1282 tsens_s7_p1: s7-p1@d6 { 1283 reg = <0xd6 0x1>; 1284 bits = <2 6>; 1285 }; 1286 1287 tsens_s8_p1: s8-p1@d7 { 1288 reg = <0xd7 0x1>; 1289 bits = <0 6>; 1290 }; 1291 1292 tsens_mode: mode@d7 { 1293 reg = <0xd7 0x1>; 1294 bits = <6 2>; 1295 }; 1296 1297 tsens_s9_p1: s9-p1@d8 { 1298 reg = <0xd8 0x1>; 1299 bits = <0 6>; 1300 }; 1301 1302 tsens_s10_p1: s10_p1@d8 { 1303 reg = <0xd8 0x2>; 1304 bits = <6 6>; 1305 }; 1306 1307 tsens_base2: base2@d9 { 1308 reg = <0xd9 0x2>; 1309 bits = <4 8>; 1310 }; 1311 1312 tsens_s0_p2: s0-p2@da { 1313 reg = <0xda 0x2>; 1314 bits = <4 6>; 1315 }; 1316 1317 tsens_s1_p2: s1-p2@db { 1318 reg = <0xdb 0x1>; 1319 bits = <2 6>; 1320 }; 1321 1322 tsens_s2_p2: s2-p2@dc { 1323 reg = <0xdc 0x1>; 1324 bits = <0 6>; 1325 }; 1326 1327 tsens_s3_p2: s3-p2@dc { 1328 reg = <0xdc 0x2>; 1329 bits = <6 6>; 1330 }; 1331 1332 tsens_s4_p2: s4-p2@dd { 1333 reg = <0xdd 0x2>; 1334 bits = <4 6>; 1335 }; 1336 1337 tsens_s5_p2: s5-p2@de { 1338 reg = <0xde 0x2>; 1339 bits = <2 6>; 1340 }; 1341 1342 tsens_s6_p2: s6-p2@df { 1343 reg = <0xdf 0x1>; 1344 bits = <0 6>; 1345 }; 1346 1347 tsens_s7_p2: s7-p2@e0 { 1348 reg = <0xe0 0x1>; 1349 bits = <0 6>; 1350 }; 1351 1352 tsens_s8_p2: s8-p2@e0 { 1353 reg = <0xe0 0x2>; 1354 bits = <6 6>; 1355 }; 1356 1357 tsens_s9_p2: s9-p2@e1 { 1358 reg = <0xe1 0x2>; 1359 bits = <4 6>; 1360 }; 1361 1362 tsens_s10_p2: s10_p2@e2 { 1363 reg = <0xe2 0x2>; 1364 bits = <2 6>; 1365 }; 1366 1367 tsens_s5_p2_backup: s5-p2_backup@e3 { 1368 reg = <0xe3 0x2>; 1369 bits = <0 6>; 1370 }; 1371 1372 tsens_mode_backup: mode_backup@e3 { 1373 reg = <0xe3 0x1>; 1374 bits = <6 2>; 1375 }; 1376 1377 tsens_s6_p2_backup: s6-p2_backup@e4 { 1378 reg = <0xe4 0x1>; 1379 bits = <0 6>; 1380 }; 1381 1382 tsens_s7_p2_backup: s7-p2_backup@e4 { 1383 reg = <0xe4 0x2>; 1384 bits = <6 6>; 1385 }; 1386 1387 tsens_s8_p2_backup: s8-p2_backup@e5 { 1388 reg = <0xe5 0x2>; 1389 bits = <4 6>; 1390 }; 1391 1392 tsens_s9_p2_backup: s9-p2_backup@e6 { 1393 reg = <0xe6 0x2>; 1394 bits = <2 6>; 1395 }; 1396 1397 tsens_s10_p2_backup: s10_p2_backup@e7 { 1398 reg = <0xe7 0x1>; 1399 bits = <0 6>; 1400 }; 1401 1402 tsens_base1_backup: base1_backup@440 { 1403 reg = <0x440 0x1>; 1404 bits = <0 8>; 1405 }; 1406 1407 tsens_s0_p1_backup: s0-p1_backup@441 { 1408 reg = <0x441 0x1>; 1409 bits = <0 6>; 1410 }; 1411 1412 tsens_s1_p1_backup: s1-p1_backup@442 { 1413 reg = <0x441 0x2>; 1414 bits = <6 6>; 1415 }; 1416 1417 tsens_s2_p1_backup: s2-p1_backup@442 { 1418 reg = <0x442 0x2>; 1419 bits = <4 6>; 1420 }; 1421 1422 tsens_s3_p1_backup: s3-p1_backup@443 { 1423 reg = <0x443 0x1>; 1424 bits = <2 6>; 1425 }; 1426 1427 tsens_s4_p1_backup: s4-p1_backup@444 { 1428 reg = <0x444 0x1>; 1429 bits = <0 6>; 1430 }; 1431 1432 tsens_s5_p1_backup: s5-p1_backup@444 { 1433 reg = <0x444 0x2>; 1434 bits = <6 6>; 1435 }; 1436 1437 tsens_s6_p1_backup: s6-p1_backup@445 { 1438 reg = <0x445 0x2>; 1439 bits = <4 6>; 1440 }; 1441 1442 tsens_s7_p1_backup: s7-p1_backup@446 { 1443 reg = <0x446 0x1>; 1444 bits = <2 6>; 1445 }; 1446 1447 tsens_use_backup: use_backup@447 { 1448 reg = <0x447 0x1>; 1449 bits = <5 3>; 1450 }; 1451 1452 tsens_s8_p1_backup: s8-p1_backup@448 { 1453 reg = <0x448 0x1>; 1454 bits = <0 6>; 1455 }; 1456 1457 tsens_s9_p1_backup: s9-p1_backup@448 { 1458 reg = <0x448 0x2>; 1459 bits = <6 6>; 1460 }; 1461 1462 tsens_s10_p1_backup: s10_p1_backup@449 { 1463 reg = <0x449 0x2>; 1464 bits = <4 6>; 1465 }; 1466 1467 tsens_base2_backup: base2_backup@44a { 1468 reg = <0x44a 0x2>; 1469 bits = <2 8>; 1470 }; 1471 1472 tsens_s0_p2_backup: s0-p2_backup@44b { 1473 reg = <0x44b 0x3>; 1474 bits = <2 6>; 1475 }; 1476 1477 tsens_s1_p2_backup: s1-p2_backup@44c { 1478 reg = <0x44c 0x1>; 1479 bits = <0 6>; 1480 }; 1481 1482 tsens_s2_p2_backup: s2-p2_backup@44c { 1483 reg = <0x44c 0x2>; 1484 bits = <6 6>; 1485 }; 1486 1487 tsens_s3_p2_backup: s3-p2_backup@44d { 1488 reg = <0x44d 0x2>; 1489 bits = <4 6>; 1490 }; 1491 1492 tsens_s4_p2_backup: s4-p2_backup@44e { 1493 reg = <0x44e 0x1>; 1494 bits = <2 6>; 1495 }; 1496 }; 1497 1498 spmi_bus: spmi@fc4cf000 { 1499 compatible = "qcom,spmi-pmic-arb"; 1500 reg-names = "core", "intr", "cnfg"; 1501 reg = <0xfc4cf000 0x1000>, 1502 <0xfc4cb000 0x1000>, 1503 <0xfc4ca000 0x1000>; 1504 interrupt-names = "periph_irq"; 1505 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1506 qcom,ee = <0>; 1507 qcom,channel = <0>; 1508 #address-cells = <2>; 1509 #size-cells = <0>; 1510 interrupt-controller; 1511 #interrupt-cells = <4>; 1512 }; 1513 1514 bam_dmux_dma: dma-controller@fc834000 { 1515 compatible = "qcom,bam-v1.4.0"; 1516 reg = <0xfc834000 0x7000>; 1517 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1518 #dma-cells = <1>; 1519 qcom,ee = <0>; 1520 1521 num-channels = <6>; 1522 qcom,num-ees = <1>; 1523 qcom,powered-remotely; 1524 }; 1525 1526 remoteproc_mss: remoteproc@fc880000 { 1527 compatible = "qcom,msm8974-mss-pil"; 1528 reg = <0xfc880000 0x100>, <0xfc820000 0x020>; 1529 reg-names = "qdsp6", "rmb"; 1530 1531 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, 1532 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1533 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1534 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1535 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1536 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 1537 1538 clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 1539 <&gcc GCC_MSS_CFG_AHB_CLK>, 1540 <&gcc GCC_BOOT_ROM_AHB_CLK>, 1541 <&xo_board>; 1542 clock-names = "iface", "bus", "mem", "xo"; 1543 1544 resets = <&gcc GCC_MSS_RESTART>; 1545 reset-names = "mss_restart"; 1546 1547 qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>; 1548 1549 qcom,smem-states = <&modem_smp2p_out 0>; 1550 qcom,smem-state-names = "stop"; 1551 1552 status = "disabled"; 1553 1554 mba { 1555 memory-region = <&mba_region>; 1556 }; 1557 1558 mpss { 1559 memory-region = <&mpss_region>; 1560 }; 1561 1562 bam_dmux: bam-dmux { 1563 compatible = "qcom,bam-dmux"; 1564 1565 interrupt-parent = <&modem_smsm>; 1566 interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; 1567 interrupt-names = "pc", "pc-ack"; 1568 1569 qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; 1570 qcom,smem-state-names = "pc", "pc-ack"; 1571 1572 dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; 1573 dma-names = "tx", "rx"; 1574 }; 1575 1576 smd-edge { 1577 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; 1578 1579 mboxes = <&apcs 12>; 1580 qcom,smd-edge = <0>; 1581 1582 label = "modem"; 1583 }; 1584 }; 1585 1586 tcsr_mutex: hwlock@fd484000 { 1587 compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon"; 1588 reg = <0xfd484000 0x2000>; 1589 #hwlock-cells = <1>; 1590 }; 1591 1592 tcsr: syscon@fd4a0000 { 1593 compatible = "qcom,tcsr-msm8974", "syscon"; 1594 reg = <0xfd4a0000 0x10000>; 1595 }; 1596 1597 tlmm: pinctrl@fd510000 { 1598 compatible = "qcom,msm8974-pinctrl"; 1599 reg = <0xfd510000 0x4000>; 1600 gpio-controller; 1601 gpio-ranges = <&tlmm 0 0 146>; 1602 #gpio-cells = <2>; 1603 interrupt-controller; 1604 #interrupt-cells = <2>; 1605 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 1606 1607 sdc1_off: sdc1-off-state { 1608 clk-pins { 1609 pins = "sdc1_clk"; 1610 bias-disable; 1611 drive-strength = <2>; 1612 }; 1613 1614 cmd-pins { 1615 pins = "sdc1_cmd"; 1616 bias-pull-up; 1617 drive-strength = <2>; 1618 }; 1619 1620 data-pins { 1621 pins = "sdc1_data"; 1622 bias-pull-up; 1623 drive-strength = <2>; 1624 }; 1625 }; 1626 1627 sdc2_off: sdc2-off-state { 1628 clk-pins { 1629 pins = "sdc2_clk"; 1630 bias-disable; 1631 drive-strength = <2>; 1632 }; 1633 1634 cmd-pins { 1635 pins = "sdc2_cmd"; 1636 bias-pull-up; 1637 drive-strength = <2>; 1638 }; 1639 1640 data-pins { 1641 pins = "sdc2_data"; 1642 bias-pull-up; 1643 drive-strength = <2>; 1644 }; 1645 }; 1646 1647 blsp1_uart2_default: blsp1-uart2-default-state { 1648 rx-pins { 1649 pins = "gpio5"; 1650 function = "blsp_uart2"; 1651 drive-strength = <2>; 1652 bias-pull-up; 1653 }; 1654 1655 tx-pins { 1656 pins = "gpio4"; 1657 function = "blsp_uart2"; 1658 drive-strength = <4>; 1659 bias-disable; 1660 }; 1661 }; 1662 1663 blsp2_uart1_default: blsp2-uart1-default-state { 1664 tx-rts-pins { 1665 pins = "gpio41", "gpio44"; 1666 function = "blsp_uart7"; 1667 drive-strength = <2>; 1668 bias-disable; 1669 }; 1670 1671 rx-cts-pins { 1672 pins = "gpio42", "gpio43"; 1673 function = "blsp_uart7"; 1674 drive-strength = <2>; 1675 bias-pull-up; 1676 }; 1677 }; 1678 1679 blsp2_uart1_sleep: blsp2-uart1-sleep-state { 1680 pins = "gpio41", "gpio42", "gpio43", "gpio44"; 1681 function = "gpio"; 1682 drive-strength = <2>; 1683 bias-pull-down; 1684 }; 1685 1686 blsp2_uart4_default: blsp2-uart4-default-state { 1687 tx-rts-pins { 1688 pins = "gpio53", "gpio56"; 1689 function = "blsp_uart10"; 1690 drive-strength = <2>; 1691 bias-disable; 1692 }; 1693 1694 rx-cts-pins { 1695 pins = "gpio54", "gpio55"; 1696 function = "blsp_uart10"; 1697 drive-strength = <2>; 1698 bias-pull-up; 1699 }; 1700 }; 1701 1702 blsp1_i2c1_default: blsp1-i2c1-default-state { 1703 pins = "gpio2", "gpio3"; 1704 function = "blsp_i2c1"; 1705 drive-strength = <2>; 1706 bias-disable; 1707 }; 1708 1709 blsp1_i2c1_sleep: blsp1-i2c1-sleep-state { 1710 pins = "gpio2", "gpio3"; 1711 function = "blsp_i2c1"; 1712 drive-strength = <2>; 1713 bias-pull-up; 1714 }; 1715 1716 blsp1_i2c2_default: blsp1-i2c2-default-state { 1717 pins = "gpio6", "gpio7"; 1718 function = "blsp_i2c2"; 1719 drive-strength = <2>; 1720 bias-disable; 1721 }; 1722 1723 blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { 1724 pins = "gpio6", "gpio7"; 1725 function = "blsp_i2c2"; 1726 drive-strength = <2>; 1727 bias-pull-up; 1728 }; 1729 1730 blsp1_i2c3_default: blsp1-i2c3-default-state { 1731 pins = "gpio10", "gpio11"; 1732 function = "blsp_i2c3"; 1733 drive-strength = <2>; 1734 bias-disable; 1735 }; 1736 1737 blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { 1738 pins = "gpio10", "gpio11"; 1739 function = "blsp_i2c3"; 1740 drive-strength = <2>; 1741 bias-pull-up; 1742 }; 1743 1744 /* BLSP1_I2C4 info is missing */ 1745 1746 /* BLSP1_I2C5 info is missing */ 1747 1748 blsp1_i2c6_default: blsp1-i2c6-default-state { 1749 pins = "gpio29", "gpio30"; 1750 function = "blsp_i2c6"; 1751 drive-strength = <2>; 1752 bias-disable; 1753 }; 1754 1755 blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { 1756 pins = "gpio29", "gpio30"; 1757 function = "blsp_i2c6"; 1758 drive-strength = <2>; 1759 bias-pull-up; 1760 }; 1761 /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ 1762 1763 /* BLSP2_I2C1 info is missing */ 1764 1765 blsp2_i2c2_default: blsp2-i2c2-default-state { 1766 pins = "gpio47", "gpio48"; 1767 function = "blsp_i2c8"; 1768 drive-strength = <2>; 1769 bias-disable; 1770 }; 1771 1772 blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { 1773 pins = "gpio47", "gpio48"; 1774 function = "blsp_i2c8"; 1775 drive-strength = <2>; 1776 bias-pull-up; 1777 }; 1778 1779 /* BLSP2_I2C3 info is missing */ 1780 1781 /* BLSP2_I2C4 info is missing */ 1782 1783 blsp2_i2c5_default: blsp2-i2c5-default-state { 1784 pins = "gpio83", "gpio84"; 1785 function = "blsp_i2c11"; 1786 drive-strength = <2>; 1787 bias-disable; 1788 }; 1789 1790 blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { 1791 pins = "gpio83", "gpio84"; 1792 function = "blsp_i2c11"; 1793 drive-strength = <2>; 1794 bias-pull-up; 1795 }; 1796 1797 blsp2_i2c6_default: blsp2-i2c6-default-state { 1798 pins = "gpio87", "gpio88"; 1799 function = "blsp_i2c12"; 1800 drive-strength = <2>; 1801 bias-disable; 1802 }; 1803 1804 blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { 1805 pins = "gpio87", "gpio88"; 1806 function = "blsp_i2c12"; 1807 drive-strength = <2>; 1808 bias-pull-up; 1809 }; 1810 1811 cci_default: cci-default-state { 1812 cci_i2c0_default: cci-i2c0-default-pins { 1813 pins = "gpio19", "gpio20"; 1814 function = "cci_i2c0"; 1815 drive-strength = <2>; 1816 bias-disable; 1817 }; 1818 1819 cci_i2c1_default: cci-i2c1-default-pins { 1820 pins = "gpio21", "gpio22"; 1821 function = "cci_i2c1"; 1822 drive-strength = <2>; 1823 bias-disable; 1824 }; 1825 }; 1826 1827 cci_sleep: cci-sleep-state { 1828 cci_i2c0_sleep: cci-i2c0-sleep-pins { 1829 pins = "gpio19", "gpio20"; 1830 function = "gpio"; 1831 drive-strength = <2>; 1832 bias-disable; 1833 }; 1834 1835 cci_i2c1_sleep: cci-i2c1-sleep-pins { 1836 pins = "gpio21", "gpio22"; 1837 function = "gpio"; 1838 drive-strength = <2>; 1839 bias-disable; 1840 }; 1841 }; 1842 1843 spi8_default: spi8_default-state { 1844 mosi-pins { 1845 pins = "gpio45"; 1846 function = "blsp_spi8"; 1847 }; 1848 miso-pins { 1849 pins = "gpio46"; 1850 function = "blsp_spi8"; 1851 }; 1852 cs-pins { 1853 pins = "gpio47"; 1854 function = "blsp_spi8"; 1855 }; 1856 clk-pins { 1857 pins = "gpio48"; 1858 function = "blsp_spi8"; 1859 }; 1860 }; 1861 }; 1862 1863 mmcc: clock-controller@fd8c0000 { 1864 compatible = "qcom,mmcc-msm8974"; 1865 #clock-cells = <1>; 1866 #reset-cells = <1>; 1867 #power-domain-cells = <1>; 1868 reg = <0xfd8c0000 0x6000>; 1869 clocks = <&xo_board>, 1870 <&gcc GCC_MMSS_GPLL0_CLK_SRC>, 1871 <&gcc GPLL0_VOTE>, 1872 <&gcc GPLL1_VOTE>, 1873 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, 1874 <&mdss_dsi0_phy 1>, 1875 <&mdss_dsi0_phy 0>, 1876 <&mdss_dsi1_phy 1>, 1877 <&mdss_dsi1_phy 0>, 1878 <0>, 1879 <0>, 1880 <0>; 1881 clock-names = "xo", 1882 "mmss_gpll0_vote", 1883 "gpll0_vote", 1884 "gpll1_vote", 1885 "gfx3d_clk_src", 1886 "dsi0pll", 1887 "dsi0pllbyte", 1888 "dsi1pll", 1889 "dsi1pllbyte", 1890 "hdmipll", 1891 "edp_link_clk", 1892 "edp_vco_div"; 1893 }; 1894 1895 mdss: display-subsystem@fd900000 { 1896 compatible = "qcom,mdss"; 1897 reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; 1898 reg-names = "mdss_phys", "vbif_phys"; 1899 1900 power-domains = <&mmcc MDSS_GDSC>; 1901 1902 clocks = <&mmcc MDSS_AHB_CLK>, 1903 <&mmcc MDSS_AXI_CLK>, 1904 <&mmcc MDSS_VSYNC_CLK>; 1905 clock-names = "iface", "bus", "vsync"; 1906 1907 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 1908 1909 interrupt-controller; 1910 #interrupt-cells = <1>; 1911 1912 status = "disabled"; 1913 1914 #address-cells = <1>; 1915 #size-cells = <1>; 1916 ranges; 1917 1918 mdp: display-controller@fd900000 { 1919 compatible = "qcom,msm8974-mdp5", "qcom,mdp5"; 1920 reg = <0xfd900100 0x22000>; 1921 reg-names = "mdp_phys"; 1922 1923 interrupt-parent = <&mdss>; 1924 interrupts = <0>; 1925 1926 clocks = <&mmcc MDSS_AHB_CLK>, 1927 <&mmcc MDSS_AXI_CLK>, 1928 <&mmcc MDSS_MDP_CLK>, 1929 <&mmcc MDSS_VSYNC_CLK>; 1930 clock-names = "iface", "bus", "core", "vsync"; 1931 1932 interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; 1933 interconnect-names = "mdp0-mem"; 1934 1935 ports { 1936 #address-cells = <1>; 1937 #size-cells = <0>; 1938 1939 port@0 { 1940 reg = <0>; 1941 mdp5_intf1_out: endpoint { 1942 remote-endpoint = <&mdss_dsi0_in>; 1943 }; 1944 }; 1945 1946 port@1 { 1947 reg = <1>; 1948 mdp5_intf2_out: endpoint { 1949 remote-endpoint = <&mdss_dsi1_in>; 1950 }; 1951 }; 1952 }; 1953 }; 1954 1955 mdss_dsi0: dsi@fd922800 { 1956 compatible = "qcom,msm8974-dsi-ctrl", 1957 "qcom,mdss-dsi-ctrl"; 1958 reg = <0xfd922800 0x1f8>; 1959 reg-names = "dsi_ctrl"; 1960 1961 interrupt-parent = <&mdss>; 1962 interrupts = <4>; 1963 1964 assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; 1965 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; 1966 1967 clocks = <&mmcc MDSS_MDP_CLK>, 1968 <&mmcc MDSS_AHB_CLK>, 1969 <&mmcc MDSS_AXI_CLK>, 1970 <&mmcc MDSS_BYTE0_CLK>, 1971 <&mmcc MDSS_PCLK0_CLK>, 1972 <&mmcc MDSS_ESC0_CLK>, 1973 <&mmcc MMSS_MISC_AHB_CLK>; 1974 clock-names = "mdp_core", 1975 "iface", 1976 "bus", 1977 "byte", 1978 "pixel", 1979 "core", 1980 "core_mmss"; 1981 1982 phys = <&mdss_dsi0_phy>; 1983 1984 status = "disabled"; 1985 1986 #address-cells = <1>; 1987 #size-cells = <0>; 1988 1989 ports { 1990 #address-cells = <1>; 1991 #size-cells = <0>; 1992 1993 port@0 { 1994 reg = <0>; 1995 mdss_dsi0_in: endpoint { 1996 remote-endpoint = <&mdp5_intf1_out>; 1997 }; 1998 }; 1999 2000 port@1 { 2001 reg = <1>; 2002 mdss_dsi0_out: endpoint { 2003 }; 2004 }; 2005 }; 2006 }; 2007 2008 mdss_dsi0_phy: phy@fd922a00 { 2009 compatible = "qcom,dsi-phy-28nm-hpm"; 2010 reg = <0xfd922a00 0xd4>, 2011 <0xfd922b00 0x280>, 2012 <0xfd922d80 0x30>; 2013 reg-names = "dsi_pll", 2014 "dsi_phy", 2015 "dsi_phy_regulator"; 2016 2017 #clock-cells = <1>; 2018 #phy-cells = <0>; 2019 2020 clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; 2021 clock-names = "iface", "ref"; 2022 2023 status = "disabled"; 2024 }; 2025 2026 mdss_dsi1: dsi@fd922e00 { 2027 compatible = "qcom,msm8974-dsi-ctrl", 2028 "qcom,mdss-dsi-ctrl"; 2029 reg = <0xfd922e00 0x1f8>; 2030 reg-names = "dsi_ctrl"; 2031 2032 interrupt-parent = <&mdss>; 2033 interrupts = <4>; 2034 2035 assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; 2036 assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; 2037 2038 clocks = <&mmcc MDSS_MDP_CLK>, 2039 <&mmcc MDSS_AHB_CLK>, 2040 <&mmcc MDSS_AXI_CLK>, 2041 <&mmcc MDSS_BYTE1_CLK>, 2042 <&mmcc MDSS_PCLK1_CLK>, 2043 <&mmcc MDSS_ESC1_CLK>, 2044 <&mmcc MMSS_MISC_AHB_CLK>; 2045 clock-names = "mdp_core", 2046 "iface", 2047 "bus", 2048 "byte", 2049 "pixel", 2050 "core", 2051 "core_mmss"; 2052 2053 phys = <&mdss_dsi1_phy>; 2054 2055 status = "disabled"; 2056 2057 #address-cells = <1>; 2058 #size-cells = <0>; 2059 2060 ports { 2061 #address-cells = <1>; 2062 #size-cells = <0>; 2063 2064 port@0 { 2065 reg = <0>; 2066 mdss_dsi1_in: endpoint { 2067 remote-endpoint = <&mdp5_intf2_out>; 2068 }; 2069 }; 2070 2071 port@1 { 2072 reg = <1>; 2073 mdss_dsi1_out: endpoint { 2074 }; 2075 }; 2076 }; 2077 }; 2078 2079 mdss_dsi1_phy: phy@fd923000 { 2080 compatible = "qcom,dsi-phy-28nm-hpm"; 2081 reg = <0xfd923000 0xd4>, 2082 <0xfd923100 0x280>, 2083 <0xfd923380 0x30>; 2084 reg-names = "dsi_pll", 2085 "dsi_phy", 2086 "dsi_phy_regulator"; 2087 2088 #clock-cells = <1>; 2089 #phy-cells = <0>; 2090 2091 clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; 2092 clock-names = "iface", "ref"; 2093 2094 status = "disabled"; 2095 }; 2096 }; 2097 2098 cci: cci@fda0c000 { 2099 compatible = "qcom,msm8974-cci"; 2100 #address-cells = <1>; 2101 #size-cells = <0>; 2102 reg = <0xfda0c000 0x1000>; 2103 interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; 2104 clocks = <&mmcc CAMSS_TOP_AHB_CLK>, 2105 <&mmcc CAMSS_CCI_CCI_AHB_CLK>, 2106 <&mmcc CAMSS_CCI_CCI_CLK>; 2107 clock-names = "camss_top_ahb", 2108 "cci_ahb", 2109 "cci"; 2110 2111 pinctrl-names = "default", "sleep"; 2112 pinctrl-0 = <&cci_default>; 2113 pinctrl-1 = <&cci_sleep>; 2114 2115 status = "disabled"; 2116 2117 cci_i2c0: i2c-bus@0 { 2118 reg = <0>; 2119 clock-frequency = <100000>; 2120 #address-cells = <1>; 2121 #size-cells = <0>; 2122 }; 2123 2124 cci_i2c1: i2c-bus@1 { 2125 reg = <1>; 2126 clock-frequency = <100000>; 2127 #address-cells = <1>; 2128 #size-cells = <0>; 2129 }; 2130 }; 2131 2132 gpu: gpu@fdb00000 { 2133 compatible = "qcom,adreno-330.1", "qcom,adreno"; 2134 reg = <0xfdb00000 0x10000>; 2135 reg-names = "kgsl_3d0_reg_memory"; 2136 2137 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 2138 interrupt-names = "kgsl_3d0_irq"; 2139 2140 clocks = <&mmcc OXILI_GFX3D_CLK>, 2141 <&mmcc OXILICX_AHB_CLK>, 2142 <&mmcc OXILICX_AXI_CLK>; 2143 clock-names = "core", "iface", "mem_iface"; 2144 2145 sram = <&gmu_sram>; 2146 power-domains = <&mmcc OXILICX_GDSC>; 2147 operating-points-v2 = <&gpu_opp_table>; 2148 2149 interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, 2150 <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; 2151 interconnect-names = "gfx-mem", "ocmem"; 2152 2153 // iommus = <&gpu_iommu 0>; 2154 2155 status = "disabled"; 2156 2157 gpu_opp_table: opp-table { 2158 compatible = "operating-points-v2"; 2159 2160 opp-320000000 { 2161 opp-hz = /bits/ 64 <320000000>; 2162 }; 2163 2164 opp-200000000 { 2165 opp-hz = /bits/ 64 <200000000>; 2166 }; 2167 2168 opp-27000000 { 2169 opp-hz = /bits/ 64 <27000000>; 2170 }; 2171 }; 2172 }; 2173 2174 sram@fdd00000 { 2175 compatible = "qcom,msm8974-ocmem"; 2176 reg = <0xfdd00000 0x2000>, 2177 <0xfec00000 0x180000>; 2178 reg-names = "ctrl", "mem"; 2179 ranges = <0 0xfec00000 0x180000>; 2180 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, 2181 <&mmcc OCMEMCX_OCMEMNOC_CLK>; 2182 clock-names = "core", "iface"; 2183 2184 #address-cells = <1>; 2185 #size-cells = <1>; 2186 2187 gmu_sram: gmu-sram@0 { 2188 reg = <0x0 0x100000>; 2189 }; 2190 }; 2191 2192 remoteproc_adsp: remoteproc@fe200000 { 2193 compatible = "qcom,msm8974-adsp-pil"; 2194 reg = <0xfe200000 0x100>; 2195 2196 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, 2197 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 2198 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 2199 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 2200 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 2201 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 2202 2203 clocks = <&xo_board>; 2204 clock-names = "xo"; 2205 2206 memory-region = <&adsp_region>; 2207 2208 qcom,smem-states = <&adsp_smp2p_out 0>; 2209 qcom,smem-state-names = "stop"; 2210 2211 status = "disabled"; 2212 2213 smd-edge { 2214 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; 2215 2216 mboxes = <&apcs 8>; 2217 qcom,smd-edge = <1>; 2218 label = "lpass"; 2219 }; 2220 }; 2221 2222 imem: sram@fe805000 { 2223 compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; 2224 reg = <0xfe805000 0x1000>; 2225 2226 reboot-mode { 2227 compatible = "syscon-reboot-mode"; 2228 offset = <0x65c>; 2229 }; 2230 }; 2231 }; 2232 2233 thermal-zones { 2234 cpu0-thermal { 2235 polling-delay-passive = <250>; 2236 polling-delay = <1000>; 2237 2238 thermal-sensors = <&tsens 5>; 2239 2240 trips { 2241 cpu_alert0: trip0 { 2242 temperature = <75000>; 2243 hysteresis = <2000>; 2244 type = "passive"; 2245 }; 2246 cpu_crit0: trip1 { 2247 temperature = <110000>; 2248 hysteresis = <2000>; 2249 type = "critical"; 2250 }; 2251 }; 2252 }; 2253 2254 cpu1-thermal { 2255 polling-delay-passive = <250>; 2256 polling-delay = <1000>; 2257 2258 thermal-sensors = <&tsens 6>; 2259 2260 trips { 2261 cpu_alert1: trip0 { 2262 temperature = <75000>; 2263 hysteresis = <2000>; 2264 type = "passive"; 2265 }; 2266 cpu_crit1: trip1 { 2267 temperature = <110000>; 2268 hysteresis = <2000>; 2269 type = "critical"; 2270 }; 2271 }; 2272 }; 2273 2274 cpu2-thermal { 2275 polling-delay-passive = <250>; 2276 polling-delay = <1000>; 2277 2278 thermal-sensors = <&tsens 7>; 2279 2280 trips { 2281 cpu_alert2: trip0 { 2282 temperature = <75000>; 2283 hysteresis = <2000>; 2284 type = "passive"; 2285 }; 2286 cpu_crit2: trip1 { 2287 temperature = <110000>; 2288 hysteresis = <2000>; 2289 type = "critical"; 2290 }; 2291 }; 2292 }; 2293 2294 cpu3-thermal { 2295 polling-delay-passive = <250>; 2296 polling-delay = <1000>; 2297 2298 thermal-sensors = <&tsens 8>; 2299 2300 trips { 2301 cpu_alert3: trip0 { 2302 temperature = <75000>; 2303 hysteresis = <2000>; 2304 type = "passive"; 2305 }; 2306 cpu_crit3: trip1 { 2307 temperature = <110000>; 2308 hysteresis = <2000>; 2309 type = "critical"; 2310 }; 2311 }; 2312 }; 2313 2314 q6-dsp-thermal { 2315 polling-delay-passive = <250>; 2316 polling-delay = <1000>; 2317 2318 thermal-sensors = <&tsens 1>; 2319 2320 trips { 2321 q6_dsp_alert0: trip-point0 { 2322 temperature = <90000>; 2323 hysteresis = <2000>; 2324 type = "hot"; 2325 }; 2326 }; 2327 }; 2328 2329 modemtx-thermal { 2330 polling-delay-passive = <250>; 2331 polling-delay = <1000>; 2332 2333 thermal-sensors = <&tsens 2>; 2334 2335 trips { 2336 modemtx_alert0: trip-point0 { 2337 temperature = <90000>; 2338 hysteresis = <2000>; 2339 type = "hot"; 2340 }; 2341 }; 2342 }; 2343 2344 video-thermal { 2345 polling-delay-passive = <250>; 2346 polling-delay = <1000>; 2347 2348 thermal-sensors = <&tsens 3>; 2349 2350 trips { 2351 video_alert0: trip-point0 { 2352 temperature = <95000>; 2353 hysteresis = <2000>; 2354 type = "hot"; 2355 }; 2356 }; 2357 }; 2358 2359 wlan-thermal { 2360 polling-delay-passive = <250>; 2361 polling-delay = <1000>; 2362 2363 thermal-sensors = <&tsens 4>; 2364 2365 trips { 2366 wlan_alert0: trip-point0 { 2367 temperature = <105000>; 2368 hysteresis = <2000>; 2369 type = "hot"; 2370 }; 2371 }; 2372 }; 2373 2374 gpu-top-thermal { 2375 polling-delay-passive = <250>; 2376 polling-delay = <1000>; 2377 2378 thermal-sensors = <&tsens 9>; 2379 2380 trips { 2381 gpu1_alert0: trip-point0 { 2382 temperature = <90000>; 2383 hysteresis = <2000>; 2384 type = "hot"; 2385 }; 2386 }; 2387 }; 2388 2389 gpu-bottom-thermal { 2390 polling-delay-passive = <250>; 2391 polling-delay = <1000>; 2392 2393 thermal-sensors = <&tsens 10>; 2394 2395 trips { 2396 gpu2_alert0: trip-point0 { 2397 temperature = <90000>; 2398 hysteresis = <2000>; 2399 type = "hot"; 2400 }; 2401 }; 2402 }; 2403 }; 2404 2405 timer { 2406 compatible = "arm,armv7-timer"; 2407 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2408 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2409 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 2410 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 2411 clock-frequency = <19200000>; 2412 }; 2413 }; 2414