1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3 
4 #include "kirkwood.dtsi"
5 #include "kirkwood-6281.dtsi"
6 
7 / {
8 	model = "LaCie CloudBox";
9 	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
10 
11 	memory {
12 		device_type = "memory";
13 		reg = <0x00000000 0x10000000>;
14 	};
15 
16 	chosen {
17 		bootargs = "console=ttyS0,115200n8";
18 		stdout-path = &uart0;
19 	};
20 
21 	ocp@f1000000 {
22 		pinctrl: pin-controller@10000 {
23 			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
24 				marvell,pins = "mpp15";
25 				marvell,function = "sata0";
26 			};
27 		};
28 
29 		serial@12000 {
30 			status = "okay";
31 		};
32 
33 		sata@80000 {
34 			pinctrl-0 = <&pmx_cloudbox_sata0>;
35 			pinctrl-names = "default";
36 			status = "okay";
37 			nr-ports = <1>;
38 		};
39 
40 		spi@10600 {
41 			status = "okay";
42 
43 			flash@0 {
44 				#address-cells = <1>;
45 				#size-cells = <1>;
46 				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
47 				reg = <0>;
48 				spi-max-frequency = <20000000>;
49 				mode = <0>;
50 
51 				partition@0 {
52 					reg = <0x0 0x80000>;
53 					label = "u-boot";
54 				};
55 			};
56 		};
57 	};
58 
59 	gpio_keys {
60 		compatible = "gpio-keys";
61 
62 		key-power {
63 			label = "Power push button";
64 			linux,code = <KEY_POWER>;
65 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
66 		};
67 	};
68 
69 	gpio-leds {
70 		compatible = "gpio-leds";
71 
72 		led-red-fail {
73 			label = "cloudbox:red:fail";
74 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
75 		};
76 		led-blue-sata {
77 			label = "cloudbox:blue:sata";
78 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
79 		};
80 	};
81 
82 	gpio_poweroff {
83 		compatible = "gpio-poweroff";
84 		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
85 	};
86 };
87 
88 &mdio {
89 	status = "okay";
90 
91 	ethphy0: ethernet-phy@0 {
92 		reg = <0>;
93 	};
94 };
95 
96 &eth0 {
97 	status = "okay";
98 	ethernet0-port@0 {
99 		phy-handle = <&ethphy0>;
100 	};
101 };
102