1 /*
2  * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of the
12  *     License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  * Or, alternatively,
20  *
21  *  b) Permission is hereby granted, free of charge, to any person
22  *     obtaining a copy of this software and associated documentation
23  *     files (the "Software"), to deal in the Software without
24  *     restriction, including without limitation the rights to use,
25  *     copy, modify, merge, publish, distribute, sublicense, and/or
26  *     sell copies of the Software, and to permit persons to whom the
27  *     Software is furnished to do so, subject to the following
28  *     conditions:
29  *
30  *     The above copyright notice and this permission notice shall be
31  *     included in all copies or substantial portions of the Software.
32  *
33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40  *     OTHER DEALINGS IN THE SOFTWARE.
41  */
42 
43 /dts-v1/;
44 #include "sun4i-a10.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47 
48 / {
49 	model = "MK802";
50 	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
51 
52 	aliases {
53 		serial0 = &uart0;
54 	};
55 
56 	chosen {
57 		stdout-path = "serial0:115200n8";
58 	};
59 
60 	hdmi-connector {
61 		compatible = "hdmi-connector";
62 		type = "a";
63 
64 		port {
65 			hdmi_con_in: endpoint {
66 				remote-endpoint = <&hdmi_out_con>;
67 			};
68 		};
69 	};
70 };
71 
72 &codec {
73 	status = "okay";
74 };
75 
76 &de {
77 	status = "okay";
78 };
79 
80 &ehci0 {
81 	status = "okay";
82 };
83 
84 &ehci1 {
85 	status = "okay";
86 };
87 
88 &hdmi {
89 	status = "okay";
90 };
91 
92 &hdmi_out {
93 	hdmi_out_con: endpoint {
94 		remote-endpoint = <&hdmi_con_in>;
95 	};
96 };
97 
98 &mmc0 {
99 	vmmc-supply = <&reg_vcc3v3>;
100 	bus-width = <4>;
101 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
102 	status = "okay";
103 };
104 
105 &ohci0 {
106 	status = "okay";
107 };
108 
109 &otg_sram {
110 	status = "okay";
111 };
112 
113 &reg_usb0_vbus {
114 	status = "okay";
115 };
116 
117 &reg_usb1_vbus {
118 	status = "okay";
119 };
120 
121 &reg_usb2_vbus {
122 	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
123 	status = "okay";
124 };
125 
126 &uart0 {
127 	pinctrl-names = "default";
128 	pinctrl-0 = <&uart0_pb_pins>;
129 	status = "okay";
130 };
131 
132 &usb_otg {
133 	dr_mode = "otg";
134 	status = "okay";
135 };
136 
137 &usbphy {
138 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
139 	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
140 	usb0_vbus-supply = <&reg_usb0_vbus>;
141 	usb1_vbus-supply = <&reg_usb1_vbus>;
142 	usb2_vbus-supply = <&reg_usb2_vbus>;
143 	status = "okay";
144 };
145