1# SPDX-License-Identifier: GPL-2.0 2# Backward compatibility 3asflags-y += $(EXTRA_AFLAGS) 4ccflags-y += $(EXTRA_CFLAGS) 5cppflags-y += $(EXTRA_CPPFLAGS) 6ldflags-y += $(EXTRA_LDFLAGS) 7 8# flags that take effect in current and sub directories 9KBUILD_AFLAGS += $(subdir-asflags-y) 10KBUILD_CFLAGS += $(subdir-ccflags-y) 11KBUILD_RUSTFLAGS += $(subdir-rustflags-y) 12 13# Figure out what we need to build from the various variables 14# =========================================================================== 15 16# When an object is listed to be built compiled-in and modular, 17# only build the compiled-in version 18obj-m := $(filter-out $(obj-y),$(obj-m)) 19 20# Libraries are always collected in one lib file. 21# Filter out objects already built-in 22lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) 23 24# Subdirectories we need to descend into 25subdir-ym := $(sort $(subdir-y) $(subdir-m) \ 26 $(patsubst %/,%, $(filter %/, $(obj-y) $(obj-m)))) 27 28# Handle objects in subdirs: 29# - If we encounter foo/ in $(obj-y), replace it by foo/built-in.a and 30# foo/modules.order 31# - If we encounter foo/ in $(obj-m), replace it by foo/modules.order 32# 33# Generate modules.order to determine modorder. Unfortunately, we don't have 34# information about ordering between -y and -m subdirs. Just put -y's first. 35 36ifdef need-modorder 37obj-m := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m)) 38else 39obj-m := $(filter-out %/, $(obj-m)) 40endif 41 42ifdef need-builtin 43obj-y := $(patsubst %/, %/built-in.a, $(obj-y)) 44else 45obj-y := $(filter-out %/, $(obj-y)) 46endif 47 48# Expand $(foo-objs) $(foo-y) etc. by replacing their individuals 49suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s)))) 50# List composite targets that are constructed by combining other targets 51multi-search = $(sort $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $m))) 52# List primitive targets that are compiled from source files 53real-search = $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $(call suffix-search, $m, $2, $3), $m)) 54 55# If $(foo-objs), $(foo-y), $(foo-m), or $(foo-) exists, foo.o is a composite object 56multi-obj-y := $(call multi-search, $(obj-y), .o, -objs -y) 57multi-obj-m := $(call multi-search, $(obj-m), .o, -objs -y -m) 58multi-obj-ym := $(multi-obj-y) $(multi-obj-m) 59 60# Replace multi-part objects by their individual parts, 61# including built-in.a from subdirectories 62real-obj-y := $(call real-search, $(obj-y), .o, -objs -y) 63real-obj-m := $(call real-search, $(obj-m), .o, -objs -y -m) 64 65always-y += $(always-m) 66 67# hostprogs-always-y += foo 68# ... is a shorthand for 69# hostprogs += foo 70# always-y += foo 71hostprogs += $(hostprogs-always-y) $(hostprogs-always-m) 72always-y += $(hostprogs-always-y) $(hostprogs-always-m) 73 74# userprogs-always-y is likewise. 75userprogs += $(userprogs-always-y) $(userprogs-always-m) 76always-y += $(userprogs-always-y) $(userprogs-always-m) 77 78# Add subdir path 79 80ifneq ($(obj),.) 81extra-y := $(addprefix $(obj)/,$(extra-y)) 82always-y := $(addprefix $(obj)/,$(always-y)) 83targets := $(addprefix $(obj)/,$(targets)) 84obj-m := $(addprefix $(obj)/,$(obj-m)) 85lib-y := $(addprefix $(obj)/,$(lib-y)) 86real-obj-y := $(addprefix $(obj)/,$(real-obj-y)) 87real-obj-m := $(addprefix $(obj)/,$(real-obj-m)) 88multi-obj-m := $(addprefix $(obj)/, $(multi-obj-m)) 89subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) 90endif 91 92# Finds the multi-part object the current object will be linked into. 93# If the object belongs to two or more multi-part objects, list them all. 94modname-multi = $(sort $(foreach m,$(multi-obj-ym),\ 95 $(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=)))) 96 97__modname = $(or $(modname-multi),$(basetarget)) 98 99modname = $(subst $(space),:,$(__modname)) 100modfile = $(addprefix $(obj)/,$(__modname)) 101 102# target with $(obj)/ and its suffix stripped 103target-stem = $(basename $(patsubst $(obj)/%,%,$@)) 104 105# These flags are needed for modversions and compiling, so we define them here 106# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will 107# end up in (or would, if it gets compiled in) 108name-fix-token = $(subst $(comma),_,$(subst -,_,$1)) 109name-fix = $(call stringify,$(call name-fix-token,$1)) 110basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget)) 111modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \ 112 -D__KBUILD_MODNAME=kmod_$(call name-fix-token,$(modname)) 113modfile_flags = -DKBUILD_MODFILE=$(call stringify,$(modfile)) 114 115_c_flags = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \ 116 $(filter-out $(ccflags-remove-y), \ 117 $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \ 118 $(CFLAGS_$(target-stem).o)) 119_rust_flags = $(filter-out $(RUSTFLAGS_REMOVE_$(target-stem).o), \ 120 $(filter-out $(rustflags-remove-y), \ 121 $(KBUILD_RUSTFLAGS) $(rustflags-y)) \ 122 $(RUSTFLAGS_$(target-stem).o)) 123_a_flags = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \ 124 $(filter-out $(asflags-remove-y), \ 125 $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \ 126 $(AFLAGS_$(target-stem).o)) 127_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(target-stem).lds) 128 129# 130# Enable gcov profiling flags for a file, directory or for all files depending 131# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL 132# (in this order) 133# 134ifeq ($(CONFIG_GCOV_KERNEL),y) 135_c_flags += $(if $(patsubst n%,, \ 136 $(GCOV_PROFILE_$(target-stem).o)$(GCOV_PROFILE)$(if $(is-kernel-object),$(CONFIG_GCOV_PROFILE_ALL))), \ 137 $(CFLAGS_GCOV)) 138endif 139 140# 141# Enable address sanitizer flags for kernel except some files or directories 142# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE) 143# 144ifeq ($(CONFIG_KASAN),y) 145ifneq ($(CONFIG_KASAN_HW_TAGS),y) 146_c_flags += $(if $(patsubst n%,, \ 147 $(KASAN_SANITIZE_$(target-stem).o)$(KASAN_SANITIZE)$(is-kernel-object)), \ 148 $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE)) 149_rust_flags += $(if $(patsubst n%,, \ 150 $(KASAN_SANITIZE_$(target-stem).o)$(KASAN_SANITIZE)$(is-kernel-object)), \ 151 $(RUSTFLAGS_KASAN)) 152endif 153endif 154 155ifeq ($(CONFIG_KMSAN),y) 156_c_flags += $(if $(patsubst n%,, \ 157 $(KMSAN_SANITIZE_$(target-stem).o)$(KMSAN_SANITIZE)$(is-kernel-object)), \ 158 $(CFLAGS_KMSAN)) 159_c_flags += $(if $(patsubst n%,, \ 160 $(KMSAN_ENABLE_CHECKS_$(target-stem).o)$(KMSAN_ENABLE_CHECKS)$(is-kernel-object)), \ 161 , -mllvm -msan-disable-checks=1) 162endif 163 164ifeq ($(CONFIG_UBSAN),y) 165_c_flags += $(if $(patsubst n%,, \ 166 $(UBSAN_SANITIZE_$(target-stem).o)$(UBSAN_SANITIZE)$(is-kernel-object)), \ 167 $(CFLAGS_UBSAN)) 168_c_flags += $(if $(patsubst n%,, \ 169 $(UBSAN_SIGNED_WRAP_$(target-stem).o)$(UBSAN_SANITIZE_$(target-stem).o)$(UBSAN_SIGNED_WRAP)$(UBSAN_SANITIZE)$(is-kernel-object)), \ 170 $(CFLAGS_UBSAN_SIGNED_WRAP)) 171endif 172 173ifeq ($(CONFIG_KCOV),y) 174_c_flags += $(if $(patsubst n%,, \ 175 $(KCOV_INSTRUMENT_$(target-stem).o)$(KCOV_INSTRUMENT)$(if $(is-kernel-object),$(CONFIG_KCOV_INSTRUMENT_ALL))), \ 176 $(CFLAGS_KCOV)) 177endif 178 179# 180# Enable KCSAN flags except some files or directories we don't want to check 181# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE) 182# 183ifeq ($(CONFIG_KCSAN),y) 184_c_flags += $(if $(patsubst n%,, \ 185 $(KCSAN_SANITIZE_$(target-stem).o)$(KCSAN_SANITIZE)$(is-kernel-object)), \ 186 $(CFLAGS_KCSAN)) 187# Some uninstrumented files provide implied barriers required to avoid false 188# positives: set KCSAN_INSTRUMENT_BARRIERS for barrier instrumentation only. 189_c_flags += $(if $(patsubst n%,, \ 190 $(KCSAN_INSTRUMENT_BARRIERS_$(target-stem).o)$(KCSAN_INSTRUMENT_BARRIERS)n), \ 191 -D__KCSAN_INSTRUMENT_BARRIERS__) 192endif 193 194# $(src) for including checkin headers from generated source files 195# $(obj) for including generated headers from checkin source files 196ifeq ($(KBUILD_EXTMOD),) 197ifdef building_out_of_srctree 198_c_flags += $(addprefix -I, $(src) $(obj)) 199_a_flags += $(addprefix -I, $(src) $(obj)) 200_cpp_flags += $(addprefix -I, $(src) $(obj)) 201endif 202endif 203 204# If $(is-kernel-object) is 'y', this object will be linked to vmlinux or modules 205is-kernel-object = $(or $(part-of-builtin),$(part-of-module)) 206 207part-of-builtin = $(if $(filter $(basename $@).o, $(real-obj-y) $(lib-y)),y) 208part-of-module = $(if $(filter $(basename $@).o, $(real-obj-m)),y) 209quiet_modtag = $(if $(part-of-module),[M], ) 210 211modkern_cflags = \ 212 $(if $(part-of-module), \ 213 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ 214 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags)) 215 216modkern_rustflags = \ 217 $(if $(part-of-module), \ 218 $(KBUILD_RUSTFLAGS_MODULE) $(RUSTFLAGS_MODULE), \ 219 $(KBUILD_RUSTFLAGS_KERNEL) $(RUSTFLAGS_KERNEL)) 220 221modkern_aflags = $(if $(part-of-module), \ 222 $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE), \ 223 $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) $(modfile_flags)) 224 225c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 226 -include $(srctree)/include/linux/compiler_types.h \ 227 $(_c_flags) $(modkern_cflags) \ 228 $(basename_flags) $(modname_flags) 229 230rust_flags = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg 231 232a_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 233 $(_a_flags) $(modkern_aflags) $(modname_flags) 234 235cpp_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 236 $(_cpp_flags) 237 238ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) 239 240ifdef CONFIG_OBJTOOL 241 242objtool := $(objtree)/tools/objtool/objtool 243 244objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK) += --hacks=jump_label 245objtool-args-$(CONFIG_HAVE_NOINSTR_HACK) += --hacks=noinstr 246objtool-args-$(CONFIG_MITIGATION_CALL_DEPTH_TRACKING) += --hacks=skylake 247objtool-args-$(CONFIG_X86_KERNEL_IBT) += --ibt 248objtool-args-$(CONFIG_FINEIBT) += --cfi 249objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL) += --mcount 250ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 251objtool-args-$(CONFIG_HAVE_OBJTOOL_NOP_MCOUNT) += --mnop 252endif 253objtool-args-$(CONFIG_UNWINDER_ORC) += --orc 254objtool-args-$(CONFIG_MITIGATION_RETPOLINE) += --retpoline 255objtool-args-$(CONFIG_MITIGATION_RETHUNK) += --rethunk 256objtool-args-$(CONFIG_MITIGATION_SLS) += --sls 257objtool-args-$(CONFIG_STACK_VALIDATION) += --stackval 258objtool-args-$(CONFIG_HAVE_STATIC_CALL_INLINE) += --static-call 259objtool-args-$(CONFIG_HAVE_UACCESS_VALIDATION) += --uaccess 260objtool-args-$(CONFIG_GCOV_KERNEL) += --no-unreachable 261objtool-args-$(CONFIG_PREFIX_SYMBOLS) += --prefix=$(CONFIG_FUNCTION_PADDING_BYTES) 262 263objtool-args = $(objtool-args-y) \ 264 $(if $(delay-objtool), --link) \ 265 $(if $(part-of-module), --module) 266 267delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT)) 268 269cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool-args) $@) 270cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd) 271 272endif # CONFIG_OBJTOOL 273 274# Useful for describing the dependency of composite objects 275# Usage: 276# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) 277define multi_depend 278$(foreach m, $1, \ 279 $(eval $m: \ 280 $(addprefix $(obj)/, $(call suffix-search, $(patsubst $(obj)/%,%,$m), $2, $3)))) 281endef 282 283# Copy a file 284# =========================================================================== 285# 'cp' preserves permissions. If you use it to copy a file in read-only srctree, 286# the copy would be read-only as well, leading to an error when executing the 287# rule next time. Use 'cat' instead in order to generate a writable file. 288quiet_cmd_copy = COPY $@ 289 cmd_copy = cat $< > $@ 290 291$(obj)/%: $(src)/%_shipped 292 $(call cmd,copy) 293 294# Commands useful for building a boot image 295# =========================================================================== 296# 297# Use as following: 298# 299# target: source(s) FORCE 300# $(if_changed,ld/objcopy/gzip) 301# 302# and add target to 'targets' so that we know we have to 303# read in the saved command line 304 305# Linking 306# --------------------------------------------------------------------------- 307 308quiet_cmd_ld = LD $@ 309 cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@ 310 311# Archive 312# --------------------------------------------------------------------------- 313 314quiet_cmd_ar = AR $@ 315 cmd_ar = rm -f $@; $(AR) cDPrsT $@ $(real-prereqs) 316 317# Objcopy 318# --------------------------------------------------------------------------- 319 320quiet_cmd_objcopy = OBJCOPY $@ 321cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 322 323# Gzip 324# --------------------------------------------------------------------------- 325 326quiet_cmd_gzip = GZIP $@ 327 cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@ 328 329# Bzip2 330# --------------------------------------------------------------------------- 331 332# Bzip2 and LZMA do not include size in file... so we have to fake that; 333# append the size as a 32-bit littleendian number as gzip does. 334size_append = printf $(shell \ 335dec_size=0; \ 336for F in $(real-prereqs); do \ 337 fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \ 338 dec_size=$$(expr $$dec_size + $$fsize); \ 339done; \ 340printf "%08x\n" $$dec_size | \ 341 sed 's/\(..\)/\1 /g' | { \ 342 read ch0 ch1 ch2 ch3; \ 343 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ 344 printf '%s%03o' '\\' $$((0x$$ch)); \ 345 done; \ 346 } \ 347) 348 349quiet_cmd_file_size = GEN $@ 350 cmd_file_size = $(size_append) > $@ 351 352quiet_cmd_bzip2 = BZIP2 $@ 353 cmd_bzip2 = cat $(real-prereqs) | $(KBZIP2) -9 > $@ 354 355quiet_cmd_bzip2_with_size = BZIP2 $@ 356 cmd_bzip2_with_size = { cat $(real-prereqs) | $(KBZIP2) -9; $(size_append); } > $@ 357 358# Lzma 359# --------------------------------------------------------------------------- 360 361quiet_cmd_lzma = LZMA $@ 362 cmd_lzma = cat $(real-prereqs) | $(LZMA) -9 > $@ 363 364quiet_cmd_lzma_with_size = LZMA $@ 365 cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ 366 367quiet_cmd_lzo = LZO $@ 368 cmd_lzo = cat $(real-prereqs) | $(KLZOP) -9 > $@ 369 370quiet_cmd_lzo_with_size = LZO $@ 371 cmd_lzo_with_size = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@ 372 373quiet_cmd_lz4 = LZ4 $@ 374 cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout > $@ 375 376quiet_cmd_lz4_with_size = LZ4 $@ 377 cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ 378 $(size_append); } > $@ 379 380# U-Boot mkimage 381# --------------------------------------------------------------------------- 382 383MKIMAGE := $(srctree)/scripts/mkuboot.sh 384 385# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces 386# the number of overrides in arch makefiles 387UIMAGE_ARCH ?= $(SRCARCH) 388UIMAGE_COMPRESSION ?= $(or $(2),none) 389UIMAGE_OPTS-y ?= 390UIMAGE_TYPE ?= kernel 391UIMAGE_LOADADDR ?= arch_must_set_this 392UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) 393UIMAGE_NAME ?= Linux-$(KERNELRELEASE) 394 395quiet_cmd_uimage = UIMAGE $@ 396 cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ 397 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ 398 -T $(UIMAGE_TYPE) \ 399 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ 400 -n '$(UIMAGE_NAME)' -d $< $@ 401 402# Flat Image Tree (FIT) 403# This allows for packaging of a kernel and all devicetrees files, using 404# compression. 405# --------------------------------------------------------------------------- 406 407MAKE_FIT := $(srctree)/scripts/make_fit.py 408 409# Use this to override the compression algorithm 410FIT_COMPRESSION ?= gzip 411 412quiet_cmd_fit = FIT $@ 413 cmd_fit = $(MAKE_FIT) -o $@ --arch $(UIMAGE_ARCH) --os linux \ 414 --name '$(UIMAGE_NAME)' \ 415 $(if $(findstring 1,$(KBUILD_VERBOSE)),-v) \ 416 $(if $(FIT_DECOMPOSE_DTBS),--decompose-dtbs) \ 417 --compress $(FIT_COMPRESSION) -k $< @$(word 2,$^) 418 419# XZ 420# --------------------------------------------------------------------------- 421# Use xzkern or xzkern_with_size to compress the kernel image and xzmisc to 422# compress other things. 423# 424# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage 425# of the kernel decompressor. A BCJ filter is used if it is available for 426# the target architecture. 427# 428# xzkern_with_size also appends uncompressed size of the data using 429# size_append. The .xz format has the size information available at the end 430# of the file too, but it's in more complex format and it's good to avoid 431# changing the part of the boot code that reads the uncompressed size. 432# Note that the bytes added by size_append will make the xz tool think that 433# the file is corrupt. This is expected. 434# 435# xzmisc doesn't use size_append, so it can be used to create normal .xz 436# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very 437# big dictionary would increase the memory usage too much in the multi-call 438# decompression mode. A BCJ filter isn't used either. 439quiet_cmd_xzkern = XZKERN $@ 440 cmd_xzkern = cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh > $@ 441 442quiet_cmd_xzkern_with_size = XZKERN $@ 443 cmd_xzkern_with_size = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \ 444 $(size_append); } > $@ 445 446quiet_cmd_xzmisc = XZMISC $@ 447 cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@ 448 449# ZSTD 450# --------------------------------------------------------------------------- 451# Appends the uncompressed size of the data using size_append. The .zst 452# format has the size information available at the beginning of the file too, 453# but it's in a more complex format and it's good to avoid changing the part 454# of the boot code that reads the uncompressed size. 455# 456# Note that the bytes added by size_append will make the zstd tool think that 457# the file is corrupt. This is expected. 458# 459# zstd uses a maximum window size of 8 MB. zstd22 uses a maximum window size of 460# 128 MB. zstd22 is used for kernel compression because it is decompressed in a 461# single pass, so zstd doesn't need to allocate a window buffer. When streaming 462# decompression is used, like initramfs decompression, zstd22 should likely not 463# be used because it would require zstd to allocate a 128 MB buffer. 464 465quiet_cmd_zstd = ZSTD $@ 466 cmd_zstd = cat $(real-prereqs) | $(ZSTD) -19 > $@ 467 468quiet_cmd_zstd22 = ZSTD22 $@ 469 cmd_zstd22 = cat $(real-prereqs) | $(ZSTD) -22 --ultra > $@ 470 471quiet_cmd_zstd22_with_size = ZSTD22 $@ 472 cmd_zstd22_with_size = { cat $(real-prereqs) | $(ZSTD) -22 --ultra; $(size_append); } > $@ 473 474# ASM offsets 475# --------------------------------------------------------------------------- 476 477# Default sed regexp - multiline due to syntax constraints 478# 479# Use [:space:] because LLVM's integrated assembler inserts <tab> around 480# the .ascii directive whereas GCC keeps the <space> as-is. 481define sed-offsets 482 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \ 483 /^->/{s:->#\(.*\):/* \1 */:; \ 484 s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ 485 s:->::; p;}' 486endef 487 488# Use filechk to avoid rebuilds when a header changes, but the resulting file 489# does not 490define filechk_offsets 491 echo "#ifndef $2"; \ 492 echo "#define $2"; \ 493 echo "/*"; \ 494 echo " * DO NOT MODIFY."; \ 495 echo " *"; \ 496 echo " * This file was generated by Kbuild"; \ 497 echo " */"; \ 498 echo ""; \ 499 sed -ne $(sed-offsets) < $<; \ 500 echo ""; \ 501 echo "#endif" 502endef 503