1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Handler for Realtek 4 byte DSA switch tags
4 * Currently only supports protocol "A" found in RTL8366RB
5 * Copyright (c) 2020 Linus Walleij <linus.walleij@linaro.org>
6 *
7 * This "proprietary tag" header looks like so:
8 *
9 * -------------------------------------------------
10 * | MAC DA | MAC SA | 0x8899 | 2 bytes tag | Type |
11 * -------------------------------------------------
12 *
13 * The 2 bytes tag form a 16 bit big endian word. The exact
14 * meaning has been guessed from packet dumps from ingress
15 * frames.
16 */
17
18 #include <linux/etherdevice.h>
19 #include <linux/bits.h>
20
21 #include "tag.h"
22
23 #define RTL4_A_NAME "rtl4a"
24
25 #define RTL4_A_HDR_LEN 4
26 #define RTL4_A_PROTOCOL_SHIFT 12
27 /*
28 * 0x1 = Realtek Remote Control protocol (RRCP)
29 * 0x2/0x3 seems to be used for loopback testing
30 * 0x9 = RTL8306 DSA protocol
31 * 0xa = RTL8366RB DSA protocol
32 */
33 #define RTL4_A_PROTOCOL_RTL8366RB 0xa
34
rtl4a_tag_xmit(struct sk_buff * skb,struct net_device * dev)35 static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb,
36 struct net_device *dev)
37 {
38 struct dsa_port *dp = dsa_user_to_port(dev);
39 __be16 *p;
40 u8 *tag;
41 u16 out;
42
43 /* Pad out to at least 60 bytes */
44 if (unlikely(__skb_put_padto(skb, ETH_ZLEN, false)))
45 return NULL;
46
47 netdev_dbg(dev, "add realtek tag to package to port %d\n",
48 dp->index);
49 skb_push(skb, RTL4_A_HDR_LEN);
50
51 dsa_alloc_etype_header(skb, RTL4_A_HDR_LEN);
52 tag = dsa_etype_header_pos_tx(skb);
53
54 /* Set Ethertype */
55 p = (__be16 *)tag;
56 *p = htons(ETH_P_REALTEK);
57
58 out = (RTL4_A_PROTOCOL_RTL8366RB << RTL4_A_PROTOCOL_SHIFT);
59 /* The lower bits indicate the port number */
60 out |= BIT(dp->index);
61
62 p = (__be16 *)(tag + 2);
63 *p = htons(out);
64
65 return skb;
66 }
67
rtl4a_tag_rcv(struct sk_buff * skb,struct net_device * dev)68 static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb,
69 struct net_device *dev)
70 {
71 u16 protport;
72 __be16 *p;
73 u16 etype;
74 u8 *tag;
75 u8 prot;
76 u8 port;
77
78 if (unlikely(!pskb_may_pull(skb, RTL4_A_HDR_LEN)))
79 return NULL;
80
81 tag = dsa_etype_header_pos_rx(skb);
82 p = (__be16 *)tag;
83 etype = ntohs(*p);
84 if (etype != ETH_P_REALTEK) {
85 /* Not custom, just pass through */
86 netdev_dbg(dev, "non-realtek ethertype 0x%04x\n", etype);
87 return skb;
88 }
89 p = (__be16 *)(tag + 2);
90 protport = ntohs(*p);
91 /* The 4 upper bits are the protocol */
92 prot = (protport >> RTL4_A_PROTOCOL_SHIFT) & 0x0f;
93 if (prot != RTL4_A_PROTOCOL_RTL8366RB) {
94 netdev_err(dev, "unknown realtek protocol 0x%01x\n", prot);
95 return NULL;
96 }
97 port = protport & 0xff;
98
99 skb->dev = dsa_conduit_find_user(dev, 0, port);
100 if (!skb->dev) {
101 netdev_dbg(dev, "could not find user for port %d\n", port);
102 return NULL;
103 }
104
105 /* Remove RTL4 tag and recalculate checksum */
106 skb_pull_rcsum(skb, RTL4_A_HDR_LEN);
107
108 dsa_strip_etype_header(skb, RTL4_A_HDR_LEN);
109
110 dsa_default_offload_fwd_mark(skb);
111
112 return skb;
113 }
114
115 static const struct dsa_device_ops rtl4a_netdev_ops = {
116 .name = RTL4_A_NAME,
117 .proto = DSA_TAG_PROTO_RTL4_A,
118 .xmit = rtl4a_tag_xmit,
119 .rcv = rtl4a_tag_rcv,
120 .needed_headroom = RTL4_A_HDR_LEN,
121 };
122 module_dsa_tag_driver(rtl4a_netdev_ops);
123
124 MODULE_DESCRIPTION("DSA tag driver for Realtek 4 byte protocol A tags");
125 MODULE_LICENSE("GPL");
126 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_RTL4_A, RTL4_A_NAME);
127