1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) STMicroelectronics 2019
3 // Authors: Gabriel Fernandez <gabriel.fernandez@st.com>
4 // Pascal Paillet <p.paillet@st.com>.
5
6 #include <linux/io.h>
7 #include <linux/iopoll.h>
8 #include <linux/module.h>
9 #include <linux/of.h>
10 #include <linux/platform_device.h>
11 #include <linux/regulator/driver.h>
12 #include <linux/regulator/of_regulator.h>
13
14 /*
15 * Registers description
16 */
17 #define REG_PWR_CR3 0x0C
18
19 #define USB_3_3_EN BIT(24)
20 #define USB_3_3_RDY BIT(26)
21 #define REG_1_8_EN BIT(28)
22 #define REG_1_8_RDY BIT(29)
23 #define REG_1_1_EN BIT(30)
24 #define REG_1_1_RDY BIT(31)
25
26 /* list of supported regulators */
27 enum {
28 PWR_REG11,
29 PWR_REG18,
30 PWR_USB33,
31 STM32PWR_REG_NUM_REGS
32 };
33
34 static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
35 [PWR_REG11] = REG_1_1_RDY,
36 [PWR_REG18] = REG_1_8_RDY,
37 [PWR_USB33] = USB_3_3_RDY,
38 };
39
40 struct stm32_pwr_reg {
41 void __iomem *base;
42 u32 ready_mask;
43 };
44
stm32_pwr_reg_is_ready(struct regulator_dev * rdev)45 static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
46 {
47 struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
48 u32 val;
49
50 val = readl_relaxed(priv->base + REG_PWR_CR3);
51
52 return (val & priv->ready_mask);
53 }
54
stm32_pwr_reg_is_enabled(struct regulator_dev * rdev)55 static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
56 {
57 struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
58 u32 val;
59
60 val = readl_relaxed(priv->base + REG_PWR_CR3);
61
62 return (val & rdev->desc->enable_mask);
63 }
64
stm32_pwr_reg_enable(struct regulator_dev * rdev)65 static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
66 {
67 struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
68 int ret;
69 u32 val;
70
71 val = readl_relaxed(priv->base + REG_PWR_CR3);
72 val |= rdev->desc->enable_mask;
73 writel_relaxed(val, priv->base + REG_PWR_CR3);
74
75 /* use an arbitrary timeout of 20ms */
76 ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, val,
77 100, 20 * 1000);
78 if (ret)
79 dev_err(&rdev->dev, "regulator enable timed out!\n");
80
81 return ret;
82 }
83
stm32_pwr_reg_disable(struct regulator_dev * rdev)84 static int stm32_pwr_reg_disable(struct regulator_dev *rdev)
85 {
86 struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
87 int ret;
88 u32 val;
89
90 val = readl_relaxed(priv->base + REG_PWR_CR3);
91 val &= ~rdev->desc->enable_mask;
92 writel_relaxed(val, priv->base + REG_PWR_CR3);
93
94 /* use an arbitrary timeout of 20ms */
95 ret = readx_poll_timeout(stm32_pwr_reg_is_enabled, rdev, val, !val,
96 100, 20 * 1000);
97 if (ret)
98 dev_err(&rdev->dev, "regulator disable timed out!\n");
99
100 return ret;
101 }
102
103 static const struct regulator_ops stm32_pwr_reg_ops = {
104 .enable = stm32_pwr_reg_enable,
105 .disable = stm32_pwr_reg_disable,
106 .is_enabled = stm32_pwr_reg_is_enabled,
107 };
108
109 #define PWR_REG(_id, _name, _volt, _en, _supply) \
110 [_id] = { \
111 .id = _id, \
112 .name = _name, \
113 .of_match = of_match_ptr(_name), \
114 .n_voltages = 1, \
115 .type = REGULATOR_VOLTAGE, \
116 .fixed_uV = _volt, \
117 .ops = &stm32_pwr_reg_ops, \
118 .enable_mask = _en, \
119 .owner = THIS_MODULE, \
120 .supply_name = _supply, \
121 } \
122
123 static const struct regulator_desc stm32_pwr_desc[] = {
124 PWR_REG(PWR_REG11, "reg11", 1100000, REG_1_1_EN, "vdd"),
125 PWR_REG(PWR_REG18, "reg18", 1800000, REG_1_8_EN, "vdd"),
126 PWR_REG(PWR_USB33, "usb33", 3300000, USB_3_3_EN, "vdd_3v3_usbfs"),
127 };
128
stm32_pwr_regulator_probe(struct platform_device * pdev)129 static int stm32_pwr_regulator_probe(struct platform_device *pdev)
130 {
131 struct stm32_pwr_reg *priv;
132 void __iomem *base;
133 struct regulator_dev *rdev;
134 struct regulator_config config = { };
135 int i, ret = 0;
136
137 base = devm_platform_ioremap_resource(pdev, 0);
138 if (IS_ERR(base)) {
139 dev_err(&pdev->dev, "Unable to map IO memory\n");
140 return PTR_ERR(base);
141 }
142
143 config.dev = &pdev->dev;
144
145 for (i = 0; i < STM32PWR_REG_NUM_REGS; i++) {
146 priv = devm_kzalloc(&pdev->dev, sizeof(struct stm32_pwr_reg),
147 GFP_KERNEL);
148 if (!priv)
149 return -ENOMEM;
150 priv->base = base;
151 priv->ready_mask = ready_mask_table[i];
152 config.driver_data = priv;
153
154 rdev = devm_regulator_register(&pdev->dev,
155 &stm32_pwr_desc[i],
156 &config);
157 if (IS_ERR(rdev)) {
158 ret = PTR_ERR(rdev);
159 dev_err(&pdev->dev,
160 "Failed to register regulator: %d\n", ret);
161 break;
162 }
163 }
164 return ret;
165 }
166
167 static const struct of_device_id __maybe_unused stm32_pwr_of_match[] = {
168 { .compatible = "st,stm32mp1,pwr-reg", },
169 { .compatible = "st,stm32mp13-pwr-reg", },
170 {},
171 };
172 MODULE_DEVICE_TABLE(of, stm32_pwr_of_match);
173
174 static struct platform_driver stm32_pwr_driver = {
175 .probe = stm32_pwr_regulator_probe,
176 .driver = {
177 .name = "stm32-pwr-regulator",
178 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
179 .of_match_table = of_match_ptr(stm32_pwr_of_match),
180 },
181 };
182 module_platform_driver(stm32_pwr_driver);
183
184 MODULE_DESCRIPTION("STM32MP1 PWR voltage regulator driver");
185 MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
186