1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * omap-control-phy.c - The PHY part of control module.
4 *
5 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Kishon Vijay Abraham I <kishon@ti.com>
7 */
8
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/property.h>
12 #include <linux/slab.h>
13 #include <linux/of.h>
14 #include <linux/err.h>
15 #include <linux/io.h>
16 #include <linux/clk.h>
17 #include <linux/phy/omap_control_phy.h>
18
19 /**
20 * omap_control_pcie_pcs - set the PCS delay count
21 * @dev: the control module device
22 * @delay: 8 bit delay value
23 */
omap_control_pcie_pcs(struct device * dev,u8 delay)24 void omap_control_pcie_pcs(struct device *dev, u8 delay)
25 {
26 u32 val;
27 struct omap_control_phy *control_phy;
28
29 if (IS_ERR_OR_NULL(dev)) {
30 pr_err("%s: invalid device\n", __func__);
31 return;
32 }
33
34 control_phy = dev_get_drvdata(dev);
35 if (!control_phy) {
36 dev_err(dev, "%s: invalid control phy device\n", __func__);
37 return;
38 }
39
40 if (control_phy->type != OMAP_CTRL_TYPE_PCIE) {
41 dev_err(dev, "%s: unsupported operation\n", __func__);
42 return;
43 }
44
45 val = readl(control_phy->pcie_pcs);
46 val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
47 OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
48 val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
49 writel(val, control_phy->pcie_pcs);
50 }
51 EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
52
53 /**
54 * omap_control_phy_power - power on/off the phy using control module reg
55 * @dev: the control module device
56 * @on: 0 or 1, based on powering on or off the PHY
57 */
omap_control_phy_power(struct device * dev,int on)58 void omap_control_phy_power(struct device *dev, int on)
59 {
60 u32 val;
61 unsigned long rate;
62 struct omap_control_phy *control_phy;
63
64 if (IS_ERR_OR_NULL(dev)) {
65 pr_err("%s: invalid device\n", __func__);
66 return;
67 }
68
69 control_phy = dev_get_drvdata(dev);
70 if (!control_phy) {
71 dev_err(dev, "%s: invalid control phy device\n", __func__);
72 return;
73 }
74
75 if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
76 return;
77
78 val = readl(control_phy->power);
79
80 switch (control_phy->type) {
81 case OMAP_CTRL_TYPE_USB2:
82 if (on)
83 val &= ~OMAP_CTRL_DEV_PHY_PD;
84 else
85 val |= OMAP_CTRL_DEV_PHY_PD;
86 break;
87
88 case OMAP_CTRL_TYPE_PCIE:
89 case OMAP_CTRL_TYPE_PIPE3:
90 rate = clk_get_rate(control_phy->sys_clk);
91 rate = rate/1000000;
92
93 if (on) {
94 val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
95 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
96 val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
97 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
98 val |= rate <<
99 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
100 } else {
101 val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
102 val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
103 OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
104 }
105 break;
106
107 case OMAP_CTRL_TYPE_DRA7USB2:
108 if (on)
109 val &= ~OMAP_CTRL_USB2_PHY_PD;
110 else
111 val |= OMAP_CTRL_USB2_PHY_PD;
112 break;
113
114 case OMAP_CTRL_TYPE_AM437USB2:
115 if (on) {
116 val &= ~(AM437X_CTRL_USB2_PHY_PD |
117 AM437X_CTRL_USB2_OTG_PD);
118 val |= (AM437X_CTRL_USB2_OTGVDET_EN |
119 AM437X_CTRL_USB2_OTGSESSEND_EN);
120 } else {
121 val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
122 AM437X_CTRL_USB2_OTGSESSEND_EN);
123 val |= (AM437X_CTRL_USB2_PHY_PD |
124 AM437X_CTRL_USB2_OTG_PD);
125 }
126 break;
127 default:
128 dev_err(dev, "%s: type %d not recognized\n",
129 __func__, control_phy->type);
130 break;
131 }
132
133 writel(val, control_phy->power);
134 }
135 EXPORT_SYMBOL_GPL(omap_control_phy_power);
136
137 /**
138 * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
139 * @ctrl_phy: struct omap_control_phy *
140 *
141 * Writes to the mailbox register to notify the usb core that a usb
142 * device has been connected.
143 */
omap_control_usb_host_mode(struct omap_control_phy * ctrl_phy)144 static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
145 {
146 u32 val;
147
148 val = readl(ctrl_phy->otghs_control);
149 val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
150 val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
151 writel(val, ctrl_phy->otghs_control);
152 }
153
154 /**
155 * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
156 * impedance
157 * @ctrl_phy: struct omap_control_phy *
158 *
159 * Writes to the mailbox register to notify the usb core that it has been
160 * connected to a usb host.
161 */
omap_control_usb_device_mode(struct omap_control_phy * ctrl_phy)162 static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
163 {
164 u32 val;
165
166 val = readl(ctrl_phy->otghs_control);
167 val &= ~OMAP_CTRL_DEV_SESSEND;
168 val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
169 OMAP_CTRL_DEV_VBUSVALID;
170 writel(val, ctrl_phy->otghs_control);
171 }
172
173 /**
174 * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
175 * impedance
176 * @ctrl_phy: struct omap_control_phy *
177 *
178 * Writes to the mailbox register to notify the usb core it's now in
179 * disconnected state.
180 */
omap_control_usb_set_sessionend(struct omap_control_phy * ctrl_phy)181 static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
182 {
183 u32 val;
184
185 val = readl(ctrl_phy->otghs_control);
186 val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
187 val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
188 writel(val, ctrl_phy->otghs_control);
189 }
190
191 /**
192 * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
193 * or device mode or to denote disconnected state
194 * @dev: the control module device
195 * @mode: The mode to which usb should be configured
196 *
197 * This is an API to write to the mailbox register to notify the usb core that
198 * a usb device has been connected.
199 */
omap_control_usb_set_mode(struct device * dev,enum omap_control_usb_mode mode)200 void omap_control_usb_set_mode(struct device *dev,
201 enum omap_control_usb_mode mode)
202 {
203 struct omap_control_phy *ctrl_phy;
204
205 if (IS_ERR_OR_NULL(dev))
206 return;
207
208 ctrl_phy = dev_get_drvdata(dev);
209 if (!ctrl_phy) {
210 dev_err(dev, "Invalid control phy device\n");
211 return;
212 }
213
214 if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
215 return;
216
217 switch (mode) {
218 case USB_MODE_HOST:
219 omap_control_usb_host_mode(ctrl_phy);
220 break;
221 case USB_MODE_DEVICE:
222 omap_control_usb_device_mode(ctrl_phy);
223 break;
224 case USB_MODE_DISCONNECT:
225 omap_control_usb_set_sessionend(ctrl_phy);
226 break;
227 default:
228 dev_vdbg(dev, "invalid omap control usb mode\n");
229 }
230 }
231 EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
232
233 static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
234 static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
235 static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
236 static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE;
237 static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
238 static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
239
240 static const struct of_device_id omap_control_phy_id_table[] = {
241 {
242 .compatible = "ti,control-phy-otghs",
243 .data = &otghs_data,
244 },
245 {
246 .compatible = "ti,control-phy-usb2",
247 .data = &usb2_data,
248 },
249 {
250 .compatible = "ti,control-phy-pipe3",
251 .data = &pipe3_data,
252 },
253 {
254 .compatible = "ti,control-phy-pcie",
255 .data = &pcie_data,
256 },
257 {
258 .compatible = "ti,control-phy-usb2-dra7",
259 .data = &dra7usb2_data,
260 },
261 {
262 .compatible = "ti,control-phy-usb2-am437",
263 .data = &am437usb2_data,
264 },
265 {},
266 };
267 MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
268
omap_control_phy_probe(struct platform_device * pdev)269 static int omap_control_phy_probe(struct platform_device *pdev)
270 {
271 struct omap_control_phy *control_phy;
272
273 control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
274 GFP_KERNEL);
275 if (!control_phy)
276 return -ENOMEM;
277
278 control_phy->dev = &pdev->dev;
279 control_phy->type = *(enum omap_control_phy_type *)device_get_match_data(&pdev->dev);
280
281 if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
282 control_phy->otghs_control =
283 devm_platform_ioremap_resource_byname(pdev, "otghs_control");
284 if (IS_ERR(control_phy->otghs_control))
285 return PTR_ERR(control_phy->otghs_control);
286 } else {
287 control_phy->power =
288 devm_platform_ioremap_resource_byname(pdev, "power");
289 if (IS_ERR(control_phy->power)) {
290 dev_err(&pdev->dev, "Couldn't get power register\n");
291 return PTR_ERR(control_phy->power);
292 }
293 }
294
295 if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 ||
296 control_phy->type == OMAP_CTRL_TYPE_PCIE) {
297 control_phy->sys_clk = devm_clk_get(control_phy->dev,
298 "sys_clkin");
299 if (IS_ERR(control_phy->sys_clk)) {
300 pr_err("%s: unable to get sys_clkin\n", __func__);
301 return -EINVAL;
302 }
303 }
304
305 if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
306 control_phy->pcie_pcs =
307 devm_platform_ioremap_resource_byname(pdev, "pcie_pcs");
308 if (IS_ERR(control_phy->pcie_pcs))
309 return PTR_ERR(control_phy->pcie_pcs);
310 }
311
312 dev_set_drvdata(control_phy->dev, control_phy);
313
314 return 0;
315 }
316
317 static struct platform_driver omap_control_phy_driver = {
318 .probe = omap_control_phy_probe,
319 .driver = {
320 .name = "omap-control-phy",
321 .of_match_table = omap_control_phy_id_table,
322 },
323 };
324
omap_control_phy_init(void)325 static int __init omap_control_phy_init(void)
326 {
327 return platform_driver_register(&omap_control_phy_driver);
328 }
329 subsys_initcall(omap_control_phy_init);
330
omap_control_phy_exit(void)331 static void __exit omap_control_phy_exit(void)
332 {
333 platform_driver_unregister(&omap_control_phy_driver);
334 }
335 module_exit(omap_control_phy_exit);
336
337 MODULE_ALIAS("platform:omap_control_phy");
338 MODULE_AUTHOR("Texas Instruments Inc.");
339 MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
340 MODULE_LICENSE("GPL v2");
341