1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * PCI IRQ handling code
4 *
5 * Copyright (c) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
6 * Copyright (C) 2017 Christoph Hellwig.
7 */
8
9 #include <linux/device.h>
10 #include <linux/kernel.h>
11 #include <linux/errno.h>
12 #include <linux/export.h>
13 #include <linux/interrupt.h>
14 #include <linux/pci.h>
15
16 #include "pci.h"
17
18 /**
19 * pci_request_irq - allocate an interrupt line for a PCI device
20 * @dev: PCI device to operate on
21 * @nr: device-relative interrupt vector index (0-based).
22 * @handler: Function to be called when the IRQ occurs.
23 * Primary handler for threaded interrupts.
24 * If NULL and thread_fn != NULL the default primary handler is
25 * installed.
26 * @thread_fn: Function called from the IRQ handler thread
27 * If NULL, no IRQ thread is created
28 * @dev_id: Cookie passed back to the handler function
29 * @fmt: Printf-like format string naming the handler
30 *
31 * This call allocates interrupt resources and enables the interrupt line and
32 * IRQ handling. From the point this call is made @handler and @thread_fn may
33 * be invoked. All interrupts requested using this function might be shared.
34 *
35 * @dev_id must not be NULL and must be globally unique.
36 */
pci_request_irq(struct pci_dev * dev,unsigned int nr,irq_handler_t handler,irq_handler_t thread_fn,void * dev_id,const char * fmt,...)37 int pci_request_irq(struct pci_dev *dev, unsigned int nr, irq_handler_t handler,
38 irq_handler_t thread_fn, void *dev_id, const char *fmt, ...)
39 {
40 va_list ap;
41 int ret;
42 char *devname;
43 unsigned long irqflags = IRQF_SHARED;
44
45 if (!handler)
46 irqflags |= IRQF_ONESHOT;
47
48 va_start(ap, fmt);
49 devname = kvasprintf(GFP_KERNEL, fmt, ap);
50 va_end(ap);
51 if (!devname)
52 return -ENOMEM;
53
54 ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
55 irqflags, devname, dev_id);
56 if (ret)
57 kfree(devname);
58 return ret;
59 }
60 EXPORT_SYMBOL(pci_request_irq);
61
62 /**
63 * pci_free_irq - free an interrupt allocated with pci_request_irq
64 * @dev: PCI device to operate on
65 * @nr: device-relative interrupt vector index (0-based).
66 * @dev_id: Device identity to free
67 *
68 * Remove an interrupt handler. The handler is removed and if the interrupt
69 * line is no longer in use by any driver it is disabled. The caller must
70 * ensure the interrupt is disabled on the device before calling this function.
71 * The function does not return until any executing interrupts for this IRQ
72 * have completed.
73 *
74 * This function must not be called from interrupt context.
75 */
pci_free_irq(struct pci_dev * dev,unsigned int nr,void * dev_id)76 void pci_free_irq(struct pci_dev *dev, unsigned int nr, void *dev_id)
77 {
78 kfree(free_irq(pci_irq_vector(dev, nr), dev_id));
79 }
80 EXPORT_SYMBOL(pci_free_irq);
81
82 /**
83 * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
84 * @dev: the PCI device
85 * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
86 *
87 * Perform INTx swizzling for a device behind one level of bridge. This is
88 * required by section 9.1 of the PCI-to-PCI bridge specification for devices
89 * behind bridges on add-in cards. For devices with ARI enabled, the slot
90 * number is always 0 (see the Implementation Note in section 2.2.8.1 of
91 * the PCI Express Base Specification, Revision 2.1)
92 */
pci_swizzle_interrupt_pin(const struct pci_dev * dev,u8 pin)93 u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin)
94 {
95 int slot;
96
97 if (pci_ari_enabled(dev->bus))
98 slot = 0;
99 else
100 slot = PCI_SLOT(dev->devfn);
101
102 return (((pin - 1) + slot) % 4) + 1;
103 }
104
pci_get_interrupt_pin(struct pci_dev * dev,struct pci_dev ** bridge)105 int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
106 {
107 u8 pin;
108
109 pin = dev->pin;
110 if (!pin)
111 return -1;
112
113 while (!pci_is_root_bus(dev->bus)) {
114 pin = pci_swizzle_interrupt_pin(dev, pin);
115 dev = dev->bus->self;
116 }
117 *bridge = dev;
118 return pin;
119 }
120
121 /**
122 * pci_common_swizzle - swizzle INTx all the way to root bridge
123 * @dev: the PCI device
124 * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
125 *
126 * Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
127 * bridges all the way up to a PCI root bus.
128 */
pci_common_swizzle(struct pci_dev * dev,u8 * pinp)129 u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
130 {
131 u8 pin = *pinp;
132
133 while (!pci_is_root_bus(dev->bus)) {
134 pin = pci_swizzle_interrupt_pin(dev, pin);
135 dev = dev->bus->self;
136 }
137 *pinp = pin;
138 return PCI_SLOT(dev->devfn);
139 }
140 EXPORT_SYMBOL_GPL(pci_common_swizzle);
141
pci_assign_irq(struct pci_dev * dev)142 void pci_assign_irq(struct pci_dev *dev)
143 {
144 u8 pin;
145 u8 slot = -1;
146 int irq = 0;
147 struct pci_host_bridge *hbrg = pci_find_host_bridge(dev->bus);
148
149 if (!(hbrg->map_irq)) {
150 pci_dbg(dev, "runtime IRQ mapping not provided by arch\n");
151 return;
152 }
153
154 /*
155 * If this device is not on the primary bus, we need to figure out
156 * which interrupt pin it will come in on. We know which slot it
157 * will come in on because that slot is where the bridge is. Each
158 * time the interrupt line passes through a PCI-PCI bridge we must
159 * apply the swizzle function.
160 */
161 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
162 /* Cope with illegal. */
163 if (pin > 4)
164 pin = 1;
165
166 if (pin) {
167 /* Follow the chain of bridges, swizzling as we go. */
168 if (hbrg->swizzle_irq)
169 slot = (*(hbrg->swizzle_irq))(dev, &pin);
170
171 /*
172 * If a swizzling function is not used, map_irq() must
173 * ignore slot.
174 */
175 irq = (*(hbrg->map_irq))(dev, slot, pin);
176 if (irq == -1)
177 irq = 0;
178 }
179 dev->irq = irq;
180
181 pci_dbg(dev, "assign IRQ: got %d\n", dev->irq);
182
183 /*
184 * Always tell the device, so the driver knows what is the real IRQ
185 * to use; the device does not use it.
186 */
187 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
188 }
189
pci_check_and_set_intx_mask(struct pci_dev * dev,bool mask)190 static bool pci_check_and_set_intx_mask(struct pci_dev *dev, bool mask)
191 {
192 struct pci_bus *bus = dev->bus;
193 bool mask_updated = true;
194 u32 cmd_status_dword;
195 u16 origcmd, newcmd;
196 unsigned long flags;
197 bool irq_pending;
198
199 /*
200 * We do a single dword read to retrieve both command and status.
201 * Document assumptions that make this possible.
202 */
203 BUILD_BUG_ON(PCI_COMMAND % 4);
204 BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS);
205
206 raw_spin_lock_irqsave(&pci_lock, flags);
207
208 bus->ops->read(bus, dev->devfn, PCI_COMMAND, 4, &cmd_status_dword);
209
210 irq_pending = (cmd_status_dword >> 16) & PCI_STATUS_INTERRUPT;
211
212 /*
213 * Check interrupt status register to see whether our device
214 * triggered the interrupt (when masking) or the next IRQ is
215 * already pending (when unmasking).
216 */
217 if (mask != irq_pending) {
218 mask_updated = false;
219 goto done;
220 }
221
222 origcmd = cmd_status_dword;
223 newcmd = origcmd & ~PCI_COMMAND_INTX_DISABLE;
224 if (mask)
225 newcmd |= PCI_COMMAND_INTX_DISABLE;
226 if (newcmd != origcmd)
227 bus->ops->write(bus, dev->devfn, PCI_COMMAND, 2, newcmd);
228
229 done:
230 raw_spin_unlock_irqrestore(&pci_lock, flags);
231
232 return mask_updated;
233 }
234
235 /**
236 * pci_check_and_mask_intx - mask INTx on pending interrupt
237 * @dev: the PCI device to operate on
238 *
239 * Check if the device dev has its INTx line asserted, mask it and return
240 * true in that case. False is returned if no interrupt was pending.
241 */
pci_check_and_mask_intx(struct pci_dev * dev)242 bool pci_check_and_mask_intx(struct pci_dev *dev)
243 {
244 return pci_check_and_set_intx_mask(dev, true);
245 }
246 EXPORT_SYMBOL_GPL(pci_check_and_mask_intx);
247
248 /**
249 * pci_check_and_unmask_intx - unmask INTx if no interrupt is pending
250 * @dev: the PCI device to operate on
251 *
252 * Check if the device dev has its INTx line asserted, unmask it if not and
253 * return true. False is returned and the mask remains active if there was
254 * still an interrupt pending.
255 */
pci_check_and_unmask_intx(struct pci_dev * dev)256 bool pci_check_and_unmask_intx(struct pci_dev *dev)
257 {
258 return pci_check_and_set_intx_mask(dev, false);
259 }
260 EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
261
262 /**
263 * pcibios_penalize_isa_irq - penalize an ISA IRQ
264 * @irq: ISA IRQ to penalize
265 * @active: IRQ active or not
266 *
267 * Permits the platform to provide architecture-specific functionality when
268 * penalizing ISA IRQs. This is the default implementation. Architecture
269 * implementations can override this.
270 */
pcibios_penalize_isa_irq(int irq,int active)271 void __weak pcibios_penalize_isa_irq(int irq, int active) {}
272
pcibios_alloc_irq(struct pci_dev * dev)273 int __weak pcibios_alloc_irq(struct pci_dev *dev)
274 {
275 return 0;
276 }
277
pcibios_free_irq(struct pci_dev * dev)278 void __weak pcibios_free_irq(struct pci_dev *dev)
279 {
280 }
281