1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Freescale MXS On-Chip OTP driver
4  *
5  * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
6  *
7  * Based on the driver from Huang Shijie and Christoph G. Baumann
8  */
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/device.h>
12 #include <linux/err.h>
13 #include <linux/io.h>
14 #include <linux/module.h>
15 #include <linux/nvmem-provider.h>
16 #include <linux/of.h>
17 #include <linux/platform_device.h>
18 #include <linux/property.h>
19 #include <linux/slab.h>
20 #include <linux/stmp_device.h>
21 
22 /* OCOTP registers and bits */
23 
24 #define BM_OCOTP_CTRL_RD_BANK_OPEN	BIT(12)
25 #define BM_OCOTP_CTRL_ERROR		BIT(9)
26 #define BM_OCOTP_CTRL_BUSY		BIT(8)
27 
28 #define OCOTP_TIMEOUT		10000
29 #define OCOTP_DATA_OFFSET	0x20
30 
31 struct mxs_ocotp {
32 	struct clk *clk;
33 	void __iomem *base;
34 	struct nvmem_device *nvmem;
35 };
36 
mxs_ocotp_wait(struct mxs_ocotp * otp)37 static int mxs_ocotp_wait(struct mxs_ocotp *otp)
38 {
39 	int timeout = OCOTP_TIMEOUT;
40 	unsigned int status = 0;
41 
42 	while (timeout--) {
43 		status = readl(otp->base);
44 
45 		if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)))
46 			break;
47 
48 		cpu_relax();
49 	}
50 
51 	if (status & BM_OCOTP_CTRL_BUSY)
52 		return -EBUSY;
53 	else if (status & BM_OCOTP_CTRL_ERROR)
54 		return -EIO;
55 
56 	return 0;
57 }
58 
mxs_ocotp_read(void * context,unsigned int offset,void * val,size_t bytes)59 static int mxs_ocotp_read(void *context, unsigned int offset,
60 			  void *val, size_t bytes)
61 {
62 	struct mxs_ocotp *otp = context;
63 	u32 *buf = val;
64 	int ret;
65 
66 	ret = clk_enable(otp->clk);
67 	if (ret)
68 		return ret;
69 
70 	writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR);
71 
72 	ret = mxs_ocotp_wait(otp);
73 	if (ret)
74 		goto disable_clk;
75 
76 	/* open OCOTP banks for read */
77 	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET);
78 
79 	/* approximately wait 33 hclk cycles */
80 	udelay(1);
81 
82 	ret = mxs_ocotp_wait(otp);
83 	if (ret)
84 		goto close_banks;
85 
86 	while (bytes) {
87 		if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
88 			/* fill up non-data register */
89 			*buf++ = 0;
90 		} else {
91 			*buf++ = readl(otp->base + offset);
92 		}
93 
94 		bytes -= 4;
95 		offset += 4;
96 	}
97 
98 close_banks:
99 	/* close banks for power saving */
100 	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR);
101 
102 disable_clk:
103 	clk_disable(otp->clk);
104 
105 	return ret;
106 }
107 
108 static struct nvmem_config ocotp_config = {
109 	.name = "mxs-ocotp",
110 	.stride = 16,
111 	.word_size = 4,
112 	.reg_read = mxs_ocotp_read,
113 };
114 
115 struct mxs_data {
116 	int size;
117 };
118 
119 static const struct mxs_data imx23_data = {
120 	.size = 0x220,
121 };
122 
123 static const struct mxs_data imx28_data = {
124 	.size = 0x2a0,
125 };
126 
127 static const struct of_device_id mxs_ocotp_match[] = {
128 	{ .compatible = "fsl,imx23-ocotp", .data = &imx23_data },
129 	{ .compatible = "fsl,imx28-ocotp", .data = &imx28_data },
130 	{ /* sentinel */},
131 };
132 MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
133 
mxs_ocotp_action(void * data)134 static void mxs_ocotp_action(void *data)
135 {
136 	clk_unprepare(data);
137 }
138 
mxs_ocotp_probe(struct platform_device * pdev)139 static int mxs_ocotp_probe(struct platform_device *pdev)
140 {
141 	struct device *dev = &pdev->dev;
142 	const struct mxs_data *data;
143 	struct mxs_ocotp *otp;
144 	int ret;
145 
146 	data = device_get_match_data(dev);
147 	if (!data)
148 		return -EINVAL;
149 
150 	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
151 	if (!otp)
152 		return -ENOMEM;
153 
154 	otp->base = devm_platform_ioremap_resource(pdev, 0);
155 	if (IS_ERR(otp->base))
156 		return PTR_ERR(otp->base);
157 
158 	otp->clk = devm_clk_get(&pdev->dev, NULL);
159 	if (IS_ERR(otp->clk))
160 		return PTR_ERR(otp->clk);
161 
162 	ret = clk_prepare(otp->clk);
163 	if (ret < 0) {
164 		dev_err(dev, "failed to prepare clk: %d\n", ret);
165 		return ret;
166 	}
167 
168 	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
169 	if (ret)
170 		return ret;
171 
172 	ocotp_config.size = data->size;
173 	ocotp_config.priv = otp;
174 	ocotp_config.dev = dev;
175 	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
176 	if (IS_ERR(otp->nvmem))
177 		return PTR_ERR(otp->nvmem);
178 
179 	platform_set_drvdata(pdev, otp);
180 
181 	return 0;
182 }
183 
184 static struct platform_driver mxs_ocotp_driver = {
185 	.probe = mxs_ocotp_probe,
186 	.driver = {
187 		.name = "mxs-ocotp",
188 		.of_match_table = mxs_ocotp_match,
189 	},
190 };
191 
192 module_platform_driver(mxs_ocotp_driver);
193 MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net");
194 MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28");
195 MODULE_LICENSE("GPL v2");
196