1 // SPDX-License-Identifier: GPL-2.0
2 #include <net/mac80211.h>
3 #include <linux/bcma/bcma_driver_chipcommon.h>
4 #include <linux/gpio/driver.h>
5 #include <linux/gpio/machine.h>
6 #include <linux/gpio/consumer.h>
7
8 #include "mac80211_if.h"
9 #include "pub.h"
10 #include "main.h"
11 #include "led.h"
12
13 /* number of leds */
14 #define BRCMS_LED_NO 4
15 /* behavior mask */
16 #define BRCMS_LED_BEH_MASK 0x7f
17 /* activelow (polarity) bit */
18 #define BRCMS_LED_AL_MASK 0x80
19 /* radio enabled */
20 #define BRCMS_LED_RADIO 3
21
brcms_radio_led_ctrl(struct brcms_info * wl,bool state)22 static void brcms_radio_led_ctrl(struct brcms_info *wl, bool state)
23 {
24 if (!wl->radio_led.gpiod)
25 return;
26
27 if (state)
28 gpiod_set_value(wl->radio_led.gpiod, 1);
29 else
30 gpiod_set_value(wl->radio_led.gpiod, 0);
31 }
32
33
34 /* Callback from the LED subsystem. */
brcms_led_brightness_set(struct led_classdev * led_dev,enum led_brightness brightness)35 static void brcms_led_brightness_set(struct led_classdev *led_dev,
36 enum led_brightness brightness)
37 {
38 struct brcms_info *wl = container_of(led_dev,
39 struct brcms_info, led_dev);
40 brcms_radio_led_ctrl(wl, brightness);
41 }
42
brcms_led_unregister(struct brcms_info * wl)43 void brcms_led_unregister(struct brcms_info *wl)
44 {
45 if (wl->led_dev.dev)
46 led_classdev_unregister(&wl->led_dev);
47 if (wl->radio_led.gpiod)
48 gpiochip_free_own_desc(wl->radio_led.gpiod);
49 }
50
brcms_led_register(struct brcms_info * wl)51 int brcms_led_register(struct brcms_info *wl)
52 {
53 int i, err;
54 struct brcms_led *radio_led = &wl->radio_led;
55 /* get CC core */
56 struct bcma_drv_cc *cc_drv = &wl->wlc->hw->d11core->bus->drv_cc;
57 struct gpio_chip *bcma_gpio = &cc_drv->gpio;
58 struct ssb_sprom *sprom = &wl->wlc->hw->d11core->bus->sprom;
59 u8 *leds[] = { &sprom->gpio0,
60 &sprom->gpio1,
61 &sprom->gpio2,
62 &sprom->gpio3 };
63 int hwnum = -1;
64 enum gpio_lookup_flags lflags = GPIO_ACTIVE_HIGH;
65
66 /* find radio enabled LED */
67 for (i = 0; i < BRCMS_LED_NO; i++) {
68 u8 led = *leds[i];
69 if ((led & BRCMS_LED_BEH_MASK) == BRCMS_LED_RADIO) {
70 hwnum = i;
71 if (led & BRCMS_LED_AL_MASK)
72 lflags = GPIO_ACTIVE_LOW;
73 break;
74 }
75 }
76
77 /* No LED, bail out */
78 if (hwnum == -1)
79 return -ENODEV;
80
81 /* Try to obtain this LED GPIO line */
82 radio_led->gpiod = gpiochip_request_own_desc(bcma_gpio, hwnum,
83 "radio on", lflags,
84 GPIOD_OUT_LOW);
85
86 if (IS_ERR(radio_led->gpiod)) {
87 err = PTR_ERR(radio_led->gpiod);
88 wiphy_err(wl->wiphy, "requesting led GPIO failed (err: %d)\n",
89 err);
90 return err;
91 }
92
93 snprintf(wl->radio_led.name, sizeof(wl->radio_led.name),
94 "brcmsmac-%s:radio", wiphy_name(wl->wiphy));
95
96 wl->led_dev.name = wl->radio_led.name;
97 wl->led_dev.default_trigger =
98 ieee80211_get_radio_led_name(wl->pub->ieee_hw);
99 wl->led_dev.brightness_set = brcms_led_brightness_set;
100 err = led_classdev_register(wiphy_dev(wl->wiphy), &wl->led_dev);
101
102 if (err) {
103 wiphy_err(wl->wiphy, "cannot register led device: %s (err: %d)\n",
104 wl->radio_led.name, err);
105 return err;
106 }
107
108 wiphy_info(wl->wiphy, "registered radio enabled led device: %s\n",
109 wl->radio_led.name);
110
111 return 0;
112 }
113