1 /*
2 * Copyright (c) 2008-2009 Atheros Communications Inc.
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18
19 #include <linux/nl80211.h>
20 #include <linux/pci.h>
21 #include <linux/etherdevice.h>
22 #include <linux/module.h>
23 #include "../ath.h"
24 #include "ath5k.h"
25 #include "debug.h"
26 #include "base.h"
27 #include "reg.h"
28
29 /* Known PCI ids */
30 static const struct pci_device_id ath5k_pci_id_table[] = {
31 { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
32 { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
33 { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
34 { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
35 { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
36 { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
37 { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
38 { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
39 { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */
40 { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */
41 { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */
42 { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */
43 { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */
44 { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */
45 { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
46 { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
47 { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
48 { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
49 { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */
50 { 0 }
51 };
52 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
53
54 /* return bus cachesize in 4B word units */
ath5k_pci_read_cachesize(struct ath_common * common,int * csz)55 static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
56 {
57 struct ath5k_hw *ah = common->priv;
58 u8 u8tmp;
59
60 pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
61 *csz = (int)u8tmp;
62
63 /*
64 * This check was put in to avoid "unpleasant" consequences if
65 * the bootrom has not fully initialized all PCI devices.
66 * Sometimes the cache line size register is not set
67 */
68
69 if (*csz == 0)
70 *csz = L1_CACHE_BYTES >> 2; /* Use the default size */
71 }
72
73 /*
74 * Read from eeprom
75 */
76 static bool
ath5k_pci_eeprom_read(struct ath_common * common,u32 offset,u16 * data)77 ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
78 {
79 struct ath5k_hw *ah = common->ah;
80 u32 status, timeout;
81
82 /*
83 * Initialize EEPROM access
84 */
85 if (ah->ah_version == AR5K_AR5210) {
86 AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
87 (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
88 } else {
89 ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
90 AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
91 AR5K_EEPROM_CMD_READ);
92 }
93
94 for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
95 status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
96 if (status & AR5K_EEPROM_STAT_RDDONE) {
97 if (status & AR5K_EEPROM_STAT_RDERR)
98 return false;
99 *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
100 0xffff);
101 return true;
102 }
103 usleep_range(15, 20);
104 }
105
106 return false;
107 }
108
ath5k_hw_read_srev(struct ath5k_hw * ah)109 int ath5k_hw_read_srev(struct ath5k_hw *ah)
110 {
111 ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
112 return 0;
113 }
114
115 /*
116 * Read the MAC address from eeprom or platform_data
117 */
ath5k_pci_eeprom_read_mac(struct ath5k_hw * ah,u8 * mac)118 static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
119 {
120 u8 mac_d[ETH_ALEN] = {};
121 u32 total, offset;
122 u16 data;
123 int octet;
124
125 AR5K_EEPROM_READ(0x20, data);
126
127 for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
128 AR5K_EEPROM_READ(offset, data);
129
130 total += data;
131 mac_d[octet + 1] = data & 0xff;
132 mac_d[octet] = data >> 8;
133 octet += 2;
134 }
135
136 if (!total || total == 3 * 0xffff)
137 return -EINVAL;
138
139 memcpy(mac, mac_d, ETH_ALEN);
140
141 return 0;
142 }
143
144
145 /* Common ath_bus_opts structure */
146 static const struct ath_bus_ops ath_pci_bus_ops = {
147 .ath_bus_type = ATH_PCI,
148 .read_cachesize = ath5k_pci_read_cachesize,
149 .eeprom_read = ath5k_pci_eeprom_read,
150 .eeprom_read_mac = ath5k_pci_eeprom_read_mac,
151 };
152
153 /********************\
154 * PCI Initialization *
155 \********************/
156
157 static int
ath5k_pci_probe(struct pci_dev * pdev,const struct pci_device_id * id)158 ath5k_pci_probe(struct pci_dev *pdev,
159 const struct pci_device_id *id)
160 {
161 void __iomem *mem;
162 struct ath5k_hw *ah;
163 struct ieee80211_hw *hw;
164 int ret;
165 u8 csz;
166
167 /*
168 * L0s needs to be disabled on all ath5k cards.
169 *
170 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
171 * by default in the future in 2.6.36) this will also mean both L1 and
172 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
173 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
174 * though but cannot currently undue the effect of a blacklist, for
175 * details you can read pcie_aspm_sanity_check() and see how it adjusts
176 * the device link capability.
177 *
178 * It may be possible in the future to implement some PCI API to allow
179 * drivers to override blacklists for pre 1.1 PCIe but for now it is
180 * best to accept that both L0s and L1 will be disabled completely for
181 * distributions shipping with CONFIG_PCIEASPM rather than having this
182 * issue present. Motivation for adding this new API will be to help
183 * with power consumption for some of these devices.
184 */
185 pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
186
187 ret = pci_enable_device(pdev);
188 if (ret) {
189 dev_err(&pdev->dev, "can't enable device\n");
190 goto err;
191 }
192
193 /* XXX 32-bit addressing only */
194 ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
195 if (ret) {
196 dev_err(&pdev->dev, "32-bit DMA not available\n");
197 goto err_dis;
198 }
199
200 /*
201 * Cache line size is used to size and align various
202 * structures used to communicate with the hardware.
203 */
204 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
205 if (csz == 0) {
206 /*
207 * Linux 2.4.18 (at least) writes the cache line size
208 * register as a 16-bit wide register which is wrong.
209 * We must have this setup properly for rx buffer
210 * DMA to work so force a reasonable value here if it
211 * comes up zero.
212 */
213 csz = L1_CACHE_BYTES >> 2;
214 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
215 }
216 /*
217 * The default setting of latency timer yields poor results,
218 * set it to the value used by other systems. It may be worth
219 * tweaking this setting more.
220 */
221 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
222
223 /* Enable bus mastering */
224 pci_set_master(pdev);
225
226 /*
227 * Disable the RETRY_TIMEOUT register (0x41) to keep
228 * PCI Tx retries from interfering with C3 CPU state.
229 */
230 pci_write_config_byte(pdev, 0x41, 0);
231
232 ret = pci_request_region(pdev, 0, "ath5k");
233 if (ret) {
234 dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
235 goto err_dis;
236 }
237
238 mem = pci_iomap(pdev, 0, 0);
239 if (!mem) {
240 dev_err(&pdev->dev, "cannot remap PCI memory region\n");
241 ret = -EIO;
242 goto err_reg;
243 }
244
245 /*
246 * Allocate hw (mac80211 main struct)
247 * and hw->priv (driver private data)
248 */
249 hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops);
250 if (hw == NULL) {
251 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
252 ret = -ENOMEM;
253 goto err_map;
254 }
255
256 dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
257
258 ah = hw->priv;
259 ah->hw = hw;
260 ah->pdev = pdev;
261 ah->dev = &pdev->dev;
262 ah->irq = pdev->irq;
263 ah->devid = id->device;
264 ah->iobase = mem; /* So we can unmap it on detach */
265
266 /* Initialize */
267 ret = ath5k_init_ah(ah, &ath_pci_bus_ops);
268 if (ret)
269 goto err_free;
270
271 /* Set private data */
272 pci_set_drvdata(pdev, hw);
273
274 return 0;
275 err_free:
276 ieee80211_free_hw(hw);
277 err_map:
278 pci_iounmap(pdev, mem);
279 err_reg:
280 pci_release_region(pdev, 0);
281 err_dis:
282 pci_disable_device(pdev);
283 err:
284 return ret;
285 }
286
287 static void
ath5k_pci_remove(struct pci_dev * pdev)288 ath5k_pci_remove(struct pci_dev *pdev)
289 {
290 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
291 struct ath5k_hw *ah = hw->priv;
292
293 ath5k_deinit_ah(ah);
294 pci_iounmap(pdev, ah->iobase);
295 pci_release_region(pdev, 0);
296 pci_disable_device(pdev);
297 ieee80211_free_hw(hw);
298 }
299
300 #ifdef CONFIG_PM_SLEEP
ath5k_pci_suspend(struct device * dev)301 static int ath5k_pci_suspend(struct device *dev)
302 {
303 struct ieee80211_hw *hw = dev_get_drvdata(dev);
304 struct ath5k_hw *ah = hw->priv;
305
306 ath5k_led_off(ah);
307 return 0;
308 }
309
ath5k_pci_resume(struct device * dev)310 static int ath5k_pci_resume(struct device *dev)
311 {
312 struct pci_dev *pdev = to_pci_dev(dev);
313 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
314 struct ath5k_hw *ah = hw->priv;
315
316 /*
317 * Suspend/Resume resets the PCI configuration space, so we have to
318 * re-disable the RETRY_TIMEOUT register (0x41) to keep
319 * PCI Tx retries from interfering with C3 CPU state
320 */
321 pci_write_config_byte(pdev, 0x41, 0);
322
323 ath5k_led_enable(ah);
324 return 0;
325 }
326
327 static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
328 #define ATH5K_PM_OPS (&ath5k_pm_ops)
329 #else
330 #define ATH5K_PM_OPS NULL
331 #endif /* CONFIG_PM_SLEEP */
332
333 static struct pci_driver ath5k_pci_driver = {
334 .name = KBUILD_MODNAME,
335 .id_table = ath5k_pci_id_table,
336 .probe = ath5k_pci_probe,
337 .remove = ath5k_pci_remove,
338 .driver.pm = ATH5K_PM_OPS,
339 };
340
341 module_pci_driver(ath5k_pci_driver);
342