1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright (C) 2004 Richard Purdie
4  *  Copyright (C) 2008 Dmitry Baryshkov
5  *
6  *  Based on Sharp's NAND driver sharp_sl.c
7  */
8 
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/delay.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/rawnand.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/sharpsl.h>
16 #include <linux/interrupt.h>
17 #include <linux/platform_device.h>
18 #include <linux/io.h>
19 
20 struct sharpsl_nand {
21 	struct nand_controller	controller;
22 	struct nand_chip	chip;
23 
24 	void __iomem		*io;
25 };
26 
mtd_to_sharpsl(struct mtd_info * mtd)27 static inline struct sharpsl_nand *mtd_to_sharpsl(struct mtd_info *mtd)
28 {
29 	return container_of(mtd_to_nand(mtd), struct sharpsl_nand, chip);
30 }
31 
32 /* register offset */
33 #define ECCLPLB		0x00	/* line parity 7 - 0 bit */
34 #define ECCLPUB		0x04	/* line parity 15 - 8 bit */
35 #define ECCCP		0x08	/* column parity 5 - 0 bit */
36 #define ECCCNTR		0x0C	/* ECC byte counter */
37 #define ECCCLRR		0x10	/* cleare ECC */
38 #define FLASHIO		0x14	/* Flash I/O */
39 #define FLASHCTL	0x18	/* Flash Control */
40 
41 /* Flash control bit */
42 #define FLRYBY		(1 << 5)
43 #define FLCE1		(1 << 4)
44 #define FLWP		(1 << 3)
45 #define FLALE		(1 << 2)
46 #define FLCLE		(1 << 1)
47 #define FLCE0		(1 << 0)
48 
49 /*
50  *	hardware specific access to control-lines
51  *	ctrl:
52  *	NAND_CNE: bit 0 -> ! bit 0 & 4
53  *	NAND_CLE: bit 1 -> bit 1
54  *	NAND_ALE: bit 2 -> bit 2
55  *
56  */
sharpsl_nand_hwcontrol(struct nand_chip * chip,int cmd,unsigned int ctrl)57 static void sharpsl_nand_hwcontrol(struct nand_chip *chip, int cmd,
58 				   unsigned int ctrl)
59 {
60 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
61 
62 	if (ctrl & NAND_CTRL_CHANGE) {
63 		unsigned char bits = ctrl & 0x07;
64 
65 		bits |= (ctrl & 0x01) << 4;
66 
67 		bits ^= 0x11;
68 
69 		writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
70 	}
71 
72 	if (cmd != NAND_CMD_NONE)
73 		writeb(cmd, chip->legacy.IO_ADDR_W);
74 }
75 
sharpsl_nand_dev_ready(struct nand_chip * chip)76 static int sharpsl_nand_dev_ready(struct nand_chip *chip)
77 {
78 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
79 	return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
80 }
81 
sharpsl_nand_enable_hwecc(struct nand_chip * chip,int mode)82 static void sharpsl_nand_enable_hwecc(struct nand_chip *chip, int mode)
83 {
84 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
85 	writeb(0, sharpsl->io + ECCCLRR);
86 }
87 
sharpsl_nand_calculate_ecc(struct nand_chip * chip,const u_char * dat,u_char * ecc_code)88 static int sharpsl_nand_calculate_ecc(struct nand_chip *chip,
89 				      const u_char * dat, u_char * ecc_code)
90 {
91 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
92 	ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
93 	ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
94 	ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
95 	return readb(sharpsl->io + ECCCNTR) != 0;
96 }
97 
sharpsl_attach_chip(struct nand_chip * chip)98 static int sharpsl_attach_chip(struct nand_chip *chip)
99 {
100 	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
101 		return 0;
102 
103 	chip->ecc.size = 256;
104 	chip->ecc.bytes = 3;
105 	chip->ecc.strength = 1;
106 	chip->ecc.hwctl = sharpsl_nand_enable_hwecc;
107 	chip->ecc.calculate = sharpsl_nand_calculate_ecc;
108 	chip->ecc.correct = rawnand_sw_hamming_correct;
109 
110 	return 0;
111 }
112 
113 static const struct nand_controller_ops sharpsl_ops = {
114 	.attach_chip = sharpsl_attach_chip,
115 };
116 
117 /*
118  * Main initialization routine
119  */
sharpsl_nand_probe(struct platform_device * pdev)120 static int sharpsl_nand_probe(struct platform_device *pdev)
121 {
122 	struct nand_chip *this;
123 	struct mtd_info *mtd;
124 	struct resource *r;
125 	int err = 0;
126 	struct sharpsl_nand *sharpsl;
127 	struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
128 
129 	if (!data) {
130 		dev_err(&pdev->dev, "no platform data!\n");
131 		return -EINVAL;
132 	}
133 
134 	/* Allocate memory for MTD device structure and private data */
135 	sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
136 	if (!sharpsl)
137 		return -ENOMEM;
138 
139 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
140 	if (!r) {
141 		dev_err(&pdev->dev, "no io memory resource defined!\n");
142 		err = -ENODEV;
143 		goto err_get_res;
144 	}
145 
146 	/* map physical address */
147 	sharpsl->io = ioremap(r->start, resource_size(r));
148 	if (!sharpsl->io) {
149 		dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
150 		err = -EIO;
151 		goto err_ioremap;
152 	}
153 
154 	/* Get pointer to private data */
155 	this = (struct nand_chip *)(&sharpsl->chip);
156 
157 	nand_controller_init(&sharpsl->controller);
158 	sharpsl->controller.ops = &sharpsl_ops;
159 	this->controller = &sharpsl->controller;
160 
161 	/* Link the private data with the MTD structure */
162 	mtd = nand_to_mtd(this);
163 	mtd->dev.parent = &pdev->dev;
164 	mtd_set_ooblayout(mtd, data->ecc_layout);
165 
166 	platform_set_drvdata(pdev, sharpsl);
167 
168 	/*
169 	 * PXA initialize
170 	 */
171 	writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
172 
173 	/* Set address of NAND IO lines */
174 	this->legacy.IO_ADDR_R = sharpsl->io + FLASHIO;
175 	this->legacy.IO_ADDR_W = sharpsl->io + FLASHIO;
176 	/* Set address of hardware control function */
177 	this->legacy.cmd_ctrl = sharpsl_nand_hwcontrol;
178 	this->legacy.dev_ready = sharpsl_nand_dev_ready;
179 	/* 15 us command delay time */
180 	this->legacy.chip_delay = 15;
181 	this->badblock_pattern = data->badblock_pattern;
182 
183 	/* Scan to find existence of the device */
184 	err = nand_scan(this, 1);
185 	if (err)
186 		goto err_scan;
187 
188 	/* Register the partitions */
189 	mtd->name = "sharpsl-nand";
190 
191 	err = mtd_device_parse_register(mtd, data->part_parsers, NULL,
192 					data->partitions, data->nr_partitions);
193 	if (err)
194 		goto err_add;
195 
196 	/* Return happy */
197 	return 0;
198 
199 err_add:
200 	nand_cleanup(this);
201 
202 err_scan:
203 	iounmap(sharpsl->io);
204 err_ioremap:
205 err_get_res:
206 	kfree(sharpsl);
207 	return err;
208 }
209 
210 /*
211  * Clean up routine
212  */
sharpsl_nand_remove(struct platform_device * pdev)213 static void sharpsl_nand_remove(struct platform_device *pdev)
214 {
215 	struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
216 	struct nand_chip *chip = &sharpsl->chip;
217 	int ret;
218 
219 	/* Unregister device */
220 	ret = mtd_device_unregister(nand_to_mtd(chip));
221 	WARN_ON(ret);
222 
223 	/* Release resources */
224 	nand_cleanup(chip);
225 
226 	iounmap(sharpsl->io);
227 
228 	/* Free the driver's structure */
229 	kfree(sharpsl);
230 }
231 
232 static struct platform_driver sharpsl_nand_driver = {
233 	.driver = {
234 		.name	= "sharpsl-nand",
235 	},
236 	.probe		= sharpsl_nand_probe,
237 	.remove_new	= sharpsl_nand_remove,
238 };
239 
240 module_platform_driver(sharpsl_nand_driver);
241 
242 MODULE_LICENSE("GPL");
243 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
244 MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
245