1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
4  * Copyright (c) 2019 Western Digital Corporation or its affiliates.
5  */
6 #define pr_fmt(fmt)     "k210-clk: " fmt
7 
8 #include <linux/io.h>
9 #include <linux/slab.h>
10 #include <linux/spinlock.h>
11 #include <linux/platform_device.h>
12 #include <linux/of.h>
13 #include <linux/of_clk.h>
14 #include <linux/of_address.h>
15 #include <linux/clk-provider.h>
16 #include <linux/bitfield.h>
17 #include <linux/delay.h>
18 #include <soc/canaan/k210-sysctl.h>
19 
20 #include <dt-bindings/clock/k210-clk.h>
21 
22 struct k210_sysclk;
23 
24 struct k210_clk {
25 	int id;
26 	struct k210_sysclk *ksc;
27 	struct clk_hw hw;
28 };
29 
30 struct k210_clk_cfg {
31 	const char *name;
32 	u8 gate_reg;
33 	u8 gate_bit;
34 	u8 div_reg;
35 	u8 div_shift;
36 	u8 div_width;
37 	u8 div_type;
38 	u8 mux_reg;
39 	u8 mux_bit;
40 };
41 
42 enum k210_clk_div_type {
43 	K210_DIV_NONE,
44 	K210_DIV_ONE_BASED,
45 	K210_DIV_DOUBLE_ONE_BASED,
46 	K210_DIV_POWER_OF_TWO,
47 };
48 
49 #define K210_GATE(_reg, _bit)	\
50 	.gate_reg = (_reg),	\
51 	.gate_bit = (_bit)
52 
53 #define K210_DIV(_reg, _shift, _width, _type)	\
54 	.div_reg = (_reg),			\
55 	.div_shift = (_shift),			\
56 	.div_width = (_width),			\
57 	.div_type = (_type)
58 
59 #define K210_MUX(_reg, _bit)	\
60 	.mux_reg = (_reg),	\
61 	.mux_bit = (_bit)
62 
63 static struct k210_clk_cfg k210_clk_cfgs[K210_NUM_CLKS] = {
64 	/* Gated clocks, no mux, no divider */
65 	[K210_CLK_CPU] = {
66 		.name = "cpu",
67 		K210_GATE(K210_SYSCTL_EN_CENT, 0)
68 	},
69 	[K210_CLK_DMA] = {
70 		.name = "dma",
71 		K210_GATE(K210_SYSCTL_EN_PERI, 1)
72 	},
73 	[K210_CLK_FFT] = {
74 		.name = "fft",
75 		K210_GATE(K210_SYSCTL_EN_PERI, 4)
76 	},
77 	[K210_CLK_GPIO] = {
78 		.name = "gpio",
79 		K210_GATE(K210_SYSCTL_EN_PERI, 5)
80 	},
81 	[K210_CLK_UART1] = {
82 		.name = "uart1",
83 		K210_GATE(K210_SYSCTL_EN_PERI, 16)
84 	},
85 	[K210_CLK_UART2] = {
86 		.name = "uart2",
87 		K210_GATE(K210_SYSCTL_EN_PERI, 17)
88 	},
89 	[K210_CLK_UART3] = {
90 		.name = "uart3",
91 		K210_GATE(K210_SYSCTL_EN_PERI, 18)
92 	},
93 	[K210_CLK_FPIOA] = {
94 		.name = "fpioa",
95 		K210_GATE(K210_SYSCTL_EN_PERI, 20)
96 	},
97 	[K210_CLK_SHA] = {
98 		.name = "sha",
99 		K210_GATE(K210_SYSCTL_EN_PERI, 26)
100 	},
101 	[K210_CLK_AES] = {
102 		.name = "aes",
103 		K210_GATE(K210_SYSCTL_EN_PERI, 19)
104 	},
105 	[K210_CLK_OTP] = {
106 		.name = "otp",
107 		K210_GATE(K210_SYSCTL_EN_PERI, 27)
108 	},
109 	[K210_CLK_RTC] = {
110 		.name = "rtc",
111 		K210_GATE(K210_SYSCTL_EN_PERI, 29)
112 	},
113 
114 	/* Gated divider clocks */
115 	[K210_CLK_SRAM0] = {
116 		.name = "sram0",
117 		K210_GATE(K210_SYSCTL_EN_CENT, 1),
118 		K210_DIV(K210_SYSCTL_THR0, 0, 4, K210_DIV_ONE_BASED)
119 	},
120 	[K210_CLK_SRAM1] = {
121 		.name = "sram1",
122 		K210_GATE(K210_SYSCTL_EN_CENT, 2),
123 		K210_DIV(K210_SYSCTL_THR0, 4, 4, K210_DIV_ONE_BASED)
124 	},
125 	[K210_CLK_ROM] = {
126 		.name = "rom",
127 		K210_GATE(K210_SYSCTL_EN_PERI, 0),
128 		K210_DIV(K210_SYSCTL_THR0, 16, 4, K210_DIV_ONE_BASED)
129 	},
130 	[K210_CLK_DVP] = {
131 		.name = "dvp",
132 		K210_GATE(K210_SYSCTL_EN_PERI, 3),
133 		K210_DIV(K210_SYSCTL_THR0, 12, 4, K210_DIV_ONE_BASED)
134 	},
135 	[K210_CLK_APB0] = {
136 		.name = "apb0",
137 		K210_GATE(K210_SYSCTL_EN_CENT, 3),
138 		K210_DIV(K210_SYSCTL_SEL0, 3, 3, K210_DIV_ONE_BASED)
139 	},
140 	[K210_CLK_APB1] = {
141 		.name = "apb1",
142 		K210_GATE(K210_SYSCTL_EN_CENT, 4),
143 		K210_DIV(K210_SYSCTL_SEL0, 6, 3, K210_DIV_ONE_BASED)
144 	},
145 	[K210_CLK_APB2] = {
146 		.name = "apb2",
147 		K210_GATE(K210_SYSCTL_EN_CENT, 5),
148 		K210_DIV(K210_SYSCTL_SEL0, 9, 3, K210_DIV_ONE_BASED)
149 	},
150 	[K210_CLK_AI] = {
151 		.name = "ai",
152 		K210_GATE(K210_SYSCTL_EN_PERI, 2),
153 		K210_DIV(K210_SYSCTL_THR0, 8, 4, K210_DIV_ONE_BASED)
154 	},
155 	[K210_CLK_SPI0] = {
156 		.name = "spi0",
157 		K210_GATE(K210_SYSCTL_EN_PERI, 6),
158 		K210_DIV(K210_SYSCTL_THR1, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
159 	},
160 	[K210_CLK_SPI1] = {
161 		.name = "spi1",
162 		K210_GATE(K210_SYSCTL_EN_PERI, 7),
163 		K210_DIV(K210_SYSCTL_THR1, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
164 	},
165 	[K210_CLK_SPI2] = {
166 		.name = "spi2",
167 		K210_GATE(K210_SYSCTL_EN_PERI, 8),
168 		K210_DIV(K210_SYSCTL_THR1, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
169 	},
170 	[K210_CLK_I2C0] = {
171 		.name = "i2c0",
172 		K210_GATE(K210_SYSCTL_EN_PERI, 13),
173 		K210_DIV(K210_SYSCTL_THR5, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
174 	},
175 	[K210_CLK_I2C1] = {
176 		.name = "i2c1",
177 		K210_GATE(K210_SYSCTL_EN_PERI, 14),
178 		K210_DIV(K210_SYSCTL_THR5, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
179 	},
180 	[K210_CLK_I2C2] = {
181 		.name = "i2c2",
182 		K210_GATE(K210_SYSCTL_EN_PERI, 15),
183 		K210_DIV(K210_SYSCTL_THR5, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
184 	},
185 	[K210_CLK_WDT0] = {
186 		.name = "wdt0",
187 		K210_GATE(K210_SYSCTL_EN_PERI, 24),
188 		K210_DIV(K210_SYSCTL_THR6, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
189 	},
190 	[K210_CLK_WDT1] = {
191 		.name = "wdt1",
192 		K210_GATE(K210_SYSCTL_EN_PERI, 25),
193 		K210_DIV(K210_SYSCTL_THR6, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
194 	},
195 	[K210_CLK_I2S0] = {
196 		.name = "i2s0",
197 		K210_GATE(K210_SYSCTL_EN_PERI, 10),
198 		K210_DIV(K210_SYSCTL_THR3, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
199 	},
200 	[K210_CLK_I2S1] = {
201 		.name = "i2s1",
202 		K210_GATE(K210_SYSCTL_EN_PERI, 11),
203 		K210_DIV(K210_SYSCTL_THR3, 16, 16, K210_DIV_DOUBLE_ONE_BASED)
204 	},
205 	[K210_CLK_I2S2] = {
206 		.name = "i2s2",
207 		K210_GATE(K210_SYSCTL_EN_PERI, 12),
208 		K210_DIV(K210_SYSCTL_THR4, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
209 	},
210 
211 	/* Divider clocks, no gate, no mux */
212 	[K210_CLK_I2S0_M] = {
213 		.name = "i2s0_m",
214 		K210_DIV(K210_SYSCTL_THR4, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
215 	},
216 	[K210_CLK_I2S1_M] = {
217 		.name = "i2s1_m",
218 		K210_DIV(K210_SYSCTL_THR4, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
219 	},
220 	[K210_CLK_I2S2_M] = {
221 		.name = "i2s2_m",
222 		K210_DIV(K210_SYSCTL_THR4, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
223 	},
224 
225 	/* Muxed gated divider clocks */
226 	[K210_CLK_SPI3] = {
227 		.name = "spi3",
228 		K210_GATE(K210_SYSCTL_EN_PERI, 9),
229 		K210_DIV(K210_SYSCTL_THR1, 24, 8, K210_DIV_DOUBLE_ONE_BASED),
230 		K210_MUX(K210_SYSCTL_SEL0, 12)
231 	},
232 	[K210_CLK_TIMER0] = {
233 		.name = "timer0",
234 		K210_GATE(K210_SYSCTL_EN_PERI, 21),
235 		K210_DIV(K210_SYSCTL_THR2,  0, 8, K210_DIV_DOUBLE_ONE_BASED),
236 		K210_MUX(K210_SYSCTL_SEL0, 13)
237 	},
238 	[K210_CLK_TIMER1] = {
239 		.name = "timer1",
240 		K210_GATE(K210_SYSCTL_EN_PERI, 22),
241 		K210_DIV(K210_SYSCTL_THR2, 8, 8, K210_DIV_DOUBLE_ONE_BASED),
242 		K210_MUX(K210_SYSCTL_SEL0, 14)
243 	},
244 	[K210_CLK_TIMER2] = {
245 		.name = "timer2",
246 		K210_GATE(K210_SYSCTL_EN_PERI, 23),
247 		K210_DIV(K210_SYSCTL_THR2, 16, 8, K210_DIV_DOUBLE_ONE_BASED),
248 		K210_MUX(K210_SYSCTL_SEL0, 15)
249 	},
250 };
251 
252 /*
253  * PLL control register bits.
254  */
255 #define K210_PLL_CLKR		GENMASK(3, 0)
256 #define K210_PLL_CLKF		GENMASK(9, 4)
257 #define K210_PLL_CLKOD		GENMASK(13, 10)
258 #define K210_PLL_BWADJ		GENMASK(19, 14)
259 #define K210_PLL_RESET		(1 << 20)
260 #define K210_PLL_PWRD		(1 << 21)
261 #define K210_PLL_INTFB		(1 << 22)
262 #define K210_PLL_BYPASS		(1 << 23)
263 #define K210_PLL_TEST		(1 << 24)
264 #define K210_PLL_EN		(1 << 25)
265 #define K210_PLL_SEL		GENMASK(27, 26) /* PLL2 only */
266 
267 /*
268  * PLL lock register bits.
269  */
270 #define K210_PLL_LOCK		0
271 #define K210_PLL_CLEAR_SLIP	2
272 #define K210_PLL_TEST_OUT	3
273 
274 /*
275  * Clock selector register bits.
276  */
277 #define K210_ACLK_SEL		BIT(0)
278 #define K210_ACLK_DIV		GENMASK(2, 1)
279 
280 /*
281  * PLLs.
282  */
283 enum k210_pll_id {
284 	K210_PLL0, K210_PLL1, K210_PLL2, K210_PLL_NUM
285 };
286 
287 struct k210_pll {
288 	enum k210_pll_id id;
289 	struct k210_sysclk *ksc;
290 	void __iomem *base;
291 	void __iomem *reg;
292 	void __iomem *lock;
293 	u8 lock_shift;
294 	u8 lock_width;
295 	struct clk_hw hw;
296 };
297 #define to_k210_pll(_hw)	container_of(_hw, struct k210_pll, hw)
298 
299 /*
300  * PLLs configuration: by default PLL0 runs at 780 MHz and PLL1 at 299 MHz.
301  * The first 2 SRAM banks depend on ACLK/CPU clock which is by default PLL0
302  * rate divided by 2. Set PLL1 to 390 MHz so that the third SRAM bank has the
303  * same clock as the first 2.
304  */
305 struct k210_pll_cfg {
306 	u32 reg;
307 	u8 lock_shift;
308 	u8 lock_width;
309 	u32 r;
310 	u32 f;
311 	u32 od;
312 	u32 bwadj;
313 };
314 
315 static struct k210_pll_cfg k210_plls_cfg[] = {
316 	{ K210_SYSCTL_PLL0,  0, 2, 0, 59, 1, 59 }, /* 780 MHz */
317 	{ K210_SYSCTL_PLL1,  8, 1, 0, 59, 3, 59 }, /* 390 MHz */
318 	{ K210_SYSCTL_PLL2, 16, 1, 0, 22, 1, 22 }, /* 299 MHz */
319 };
320 
321 /**
322  * struct k210_sysclk - sysclk driver data
323  * @regs: system controller registers start address
324  * @clk_lock: clock setting spinlock
325  * @plls: SoC PLLs descriptors
326  * @aclk: ACLK clock
327  * @clks: All other clocks
328  */
329 struct k210_sysclk {
330 	void __iomem			*regs;
331 	spinlock_t			clk_lock;
332 	struct k210_pll			plls[K210_PLL_NUM];
333 	struct clk_hw			aclk;
334 	struct k210_clk			clks[K210_NUM_CLKS];
335 };
336 
337 #define to_k210_sysclk(_hw)	container_of(_hw, struct k210_sysclk, aclk)
338 
339 /*
340  * Set ACLK parent selector: 0 for IN0, 1 for PLL0.
341  */
k210_aclk_set_selector(void __iomem * regs,u8 sel)342 static void k210_aclk_set_selector(void __iomem *regs, u8 sel)
343 {
344 	u32 reg = readl(regs + K210_SYSCTL_SEL0);
345 
346 	if (sel)
347 		reg |= K210_ACLK_SEL;
348 	else
349 		reg &= K210_ACLK_SEL;
350 	writel(reg, regs + K210_SYSCTL_SEL0);
351 }
352 
k210_init_pll(void __iomem * regs,enum k210_pll_id pllid,struct k210_pll * pll)353 static void k210_init_pll(void __iomem *regs, enum k210_pll_id pllid,
354 			  struct k210_pll *pll)
355 {
356 	pll->id = pllid;
357 	pll->reg = regs + k210_plls_cfg[pllid].reg;
358 	pll->lock = regs + K210_SYSCTL_PLL_LOCK;
359 	pll->lock_shift = k210_plls_cfg[pllid].lock_shift;
360 	pll->lock_width = k210_plls_cfg[pllid].lock_width;
361 }
362 
k210_pll_wait_for_lock(struct k210_pll * pll)363 static void k210_pll_wait_for_lock(struct k210_pll *pll)
364 {
365 	u32 reg, mask = GENMASK(pll->lock_shift + pll->lock_width - 1,
366 				pll->lock_shift);
367 
368 	while (true) {
369 		reg = readl(pll->lock);
370 		if ((reg & mask) == mask)
371 			break;
372 
373 		reg |= BIT(pll->lock_shift + K210_PLL_CLEAR_SLIP);
374 		writel(reg, pll->lock);
375 	}
376 }
377 
k210_pll_hw_is_enabled(struct k210_pll * pll)378 static bool k210_pll_hw_is_enabled(struct k210_pll *pll)
379 {
380 	u32 reg = readl(pll->reg);
381 	u32 mask = K210_PLL_PWRD | K210_PLL_EN;
382 
383 	if (reg & K210_PLL_RESET)
384 		return false;
385 
386 	return (reg & mask) == mask;
387 }
388 
k210_pll_enable_hw(void __iomem * regs,struct k210_pll * pll)389 static void k210_pll_enable_hw(void __iomem *regs, struct k210_pll *pll)
390 {
391 	struct k210_pll_cfg *pll_cfg = &k210_plls_cfg[pll->id];
392 	u32 reg;
393 
394 	if (k210_pll_hw_is_enabled(pll))
395 		return;
396 
397 	/*
398 	 * For PLL0, we need to re-parent ACLK to IN0 to keep the CPU cores and
399 	 * SRAM running.
400 	 */
401 	if (pll->id == K210_PLL0)
402 		k210_aclk_set_selector(regs, 0);
403 
404 	/* Set PLL factors */
405 	reg = readl(pll->reg);
406 	reg &= ~GENMASK(19, 0);
407 	reg |= FIELD_PREP(K210_PLL_CLKR, pll_cfg->r);
408 	reg |= FIELD_PREP(K210_PLL_CLKF, pll_cfg->f);
409 	reg |= FIELD_PREP(K210_PLL_CLKOD, pll_cfg->od);
410 	reg |= FIELD_PREP(K210_PLL_BWADJ, pll_cfg->bwadj);
411 	reg |= K210_PLL_PWRD;
412 	writel(reg, pll->reg);
413 
414 	/*
415 	 * Reset the PLL: ensure reset is low before asserting it.
416 	 * The magic NOPs come from the Kendryte reference SDK.
417 	 */
418 	reg &= ~K210_PLL_RESET;
419 	writel(reg, pll->reg);
420 	reg |= K210_PLL_RESET;
421 	writel(reg, pll->reg);
422 	nop();
423 	nop();
424 	reg &= ~K210_PLL_RESET;
425 	writel(reg, pll->reg);
426 
427 	k210_pll_wait_for_lock(pll);
428 
429 	reg &= ~K210_PLL_BYPASS;
430 	reg |= K210_PLL_EN;
431 	writel(reg, pll->reg);
432 
433 	if (pll->id == K210_PLL0)
434 		k210_aclk_set_selector(regs, 1);
435 }
436 
k210_pll_enable(struct clk_hw * hw)437 static int k210_pll_enable(struct clk_hw *hw)
438 {
439 	struct k210_pll *pll = to_k210_pll(hw);
440 	struct k210_sysclk *ksc = pll->ksc;
441 	unsigned long flags;
442 
443 	spin_lock_irqsave(&ksc->clk_lock, flags);
444 
445 	k210_pll_enable_hw(ksc->regs, pll);
446 
447 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
448 
449 	return 0;
450 }
451 
k210_pll_disable(struct clk_hw * hw)452 static void k210_pll_disable(struct clk_hw *hw)
453 {
454 	struct k210_pll *pll = to_k210_pll(hw);
455 	struct k210_sysclk *ksc = pll->ksc;
456 	unsigned long flags;
457 	u32 reg;
458 
459 	/*
460 	 * Bypassing before powering off is important so child clocks do not
461 	 * stop working. This is especially important for pll0, the indirect
462 	 * parent of the cpu clock.
463 	 */
464 	spin_lock_irqsave(&ksc->clk_lock, flags);
465 	reg = readl(pll->reg);
466 	reg |= K210_PLL_BYPASS;
467 	writel(reg, pll->reg);
468 
469 	reg &= ~K210_PLL_PWRD;
470 	reg &= ~K210_PLL_EN;
471 	writel(reg, pll->reg);
472 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
473 }
474 
k210_pll_is_enabled(struct clk_hw * hw)475 static int k210_pll_is_enabled(struct clk_hw *hw)
476 {
477 	return k210_pll_hw_is_enabled(to_k210_pll(hw));
478 }
479 
k210_pll_get_rate(struct clk_hw * hw,unsigned long parent_rate)480 static unsigned long k210_pll_get_rate(struct clk_hw *hw,
481 				       unsigned long parent_rate)
482 {
483 	struct k210_pll *pll = to_k210_pll(hw);
484 	u32 reg = readl(pll->reg);
485 	u32 r, f, od;
486 
487 	if (reg & K210_PLL_BYPASS)
488 		return parent_rate;
489 
490 	if (!(reg & K210_PLL_PWRD))
491 		return 0;
492 
493 	r = FIELD_GET(K210_PLL_CLKR, reg) + 1;
494 	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
495 	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
496 
497 	return div_u64((u64)parent_rate * f, r * od);
498 }
499 
500 static const struct clk_ops k210_pll_ops = {
501 	.enable		= k210_pll_enable,
502 	.disable	= k210_pll_disable,
503 	.is_enabled	= k210_pll_is_enabled,
504 	.recalc_rate	= k210_pll_get_rate,
505 };
506 
k210_pll2_set_parent(struct clk_hw * hw,u8 index)507 static int k210_pll2_set_parent(struct clk_hw *hw, u8 index)
508 {
509 	struct k210_pll *pll = to_k210_pll(hw);
510 	struct k210_sysclk *ksc = pll->ksc;
511 	unsigned long flags;
512 	u32 reg;
513 
514 	spin_lock_irqsave(&ksc->clk_lock, flags);
515 
516 	reg = readl(pll->reg);
517 	reg &= ~K210_PLL_SEL;
518 	reg |= FIELD_PREP(K210_PLL_SEL, index);
519 	writel(reg, pll->reg);
520 
521 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
522 
523 	return 0;
524 }
525 
k210_pll2_get_parent(struct clk_hw * hw)526 static u8 k210_pll2_get_parent(struct clk_hw *hw)
527 {
528 	struct k210_pll *pll = to_k210_pll(hw);
529 	u32 reg = readl(pll->reg);
530 
531 	return FIELD_GET(K210_PLL_SEL, reg);
532 }
533 
534 static const struct clk_ops k210_pll2_ops = {
535 	.enable		= k210_pll_enable,
536 	.disable	= k210_pll_disable,
537 	.is_enabled	= k210_pll_is_enabled,
538 	.recalc_rate	= k210_pll_get_rate,
539 	.determine_rate = clk_hw_determine_rate_no_reparent,
540 	.set_parent	= k210_pll2_set_parent,
541 	.get_parent	= k210_pll2_get_parent,
542 };
543 
k210_register_pll(struct device_node * np,struct k210_sysclk * ksc,enum k210_pll_id pllid,const char * name,int num_parents,const struct clk_ops * ops)544 static int __init k210_register_pll(struct device_node *np,
545 				    struct k210_sysclk *ksc,
546 				    enum k210_pll_id pllid, const char *name,
547 				    int num_parents, const struct clk_ops *ops)
548 {
549 	struct k210_pll *pll = &ksc->plls[pllid];
550 	struct clk_init_data init = {};
551 	const struct clk_parent_data parent_data[] = {
552 		{ /* .index = 0 for in0 */ },
553 		{ .hw = &ksc->plls[K210_PLL0].hw },
554 		{ .hw = &ksc->plls[K210_PLL1].hw },
555 	};
556 
557 	init.name = name;
558 	init.parent_data = parent_data;
559 	init.num_parents = num_parents;
560 	init.ops = ops;
561 
562 	pll->hw.init = &init;
563 	pll->ksc = ksc;
564 
565 	return of_clk_hw_register(np, &pll->hw);
566 }
567 
k210_register_plls(struct device_node * np,struct k210_sysclk * ksc)568 static int __init k210_register_plls(struct device_node *np,
569 				     struct k210_sysclk *ksc)
570 {
571 	int i, ret;
572 
573 	for (i = 0; i < K210_PLL_NUM; i++)
574 		k210_init_pll(ksc->regs, i, &ksc->plls[i]);
575 
576 	/* PLL0 and PLL1 only have IN0 as parent */
577 	ret = k210_register_pll(np, ksc, K210_PLL0, "pll0", 1, &k210_pll_ops);
578 	if (ret) {
579 		pr_err("%pOFP: register PLL0 failed\n", np);
580 		return ret;
581 	}
582 	ret = k210_register_pll(np, ksc, K210_PLL1, "pll1", 1, &k210_pll_ops);
583 	if (ret) {
584 		pr_err("%pOFP: register PLL1 failed\n", np);
585 		return ret;
586 	}
587 
588 	/* PLL2 has IN0, PLL0 and PLL1 as parents */
589 	ret = k210_register_pll(np, ksc, K210_PLL2, "pll2", 3, &k210_pll2_ops);
590 	if (ret) {
591 		pr_err("%pOFP: register PLL2 failed\n", np);
592 		return ret;
593 	}
594 
595 	return 0;
596 }
597 
k210_aclk_set_parent(struct clk_hw * hw,u8 index)598 static int k210_aclk_set_parent(struct clk_hw *hw, u8 index)
599 {
600 	struct k210_sysclk *ksc = to_k210_sysclk(hw);
601 	unsigned long flags;
602 
603 	spin_lock_irqsave(&ksc->clk_lock, flags);
604 
605 	k210_aclk_set_selector(ksc->regs, index);
606 
607 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
608 
609 	return 0;
610 }
611 
k210_aclk_get_parent(struct clk_hw * hw)612 static u8 k210_aclk_get_parent(struct clk_hw *hw)
613 {
614 	struct k210_sysclk *ksc = to_k210_sysclk(hw);
615 	u32 sel;
616 
617 	sel = readl(ksc->regs + K210_SYSCTL_SEL0) & K210_ACLK_SEL;
618 
619 	return sel ? 1 : 0;
620 }
621 
k210_aclk_get_rate(struct clk_hw * hw,unsigned long parent_rate)622 static unsigned long k210_aclk_get_rate(struct clk_hw *hw,
623 					unsigned long parent_rate)
624 {
625 	struct k210_sysclk *ksc = to_k210_sysclk(hw);
626 	u32 reg = readl(ksc->regs + K210_SYSCTL_SEL0);
627 	unsigned int shift;
628 
629 	if (!(reg & 0x1))
630 		return parent_rate;
631 
632 	shift = FIELD_GET(K210_ACLK_DIV, reg);
633 
634 	return parent_rate / (2UL << shift);
635 }
636 
637 static const struct clk_ops k210_aclk_ops = {
638 	.determine_rate = clk_hw_determine_rate_no_reparent,
639 	.set_parent	= k210_aclk_set_parent,
640 	.get_parent	= k210_aclk_get_parent,
641 	.recalc_rate	= k210_aclk_get_rate,
642 };
643 
644 /*
645  * ACLK has IN0 and PLL0 as parents.
646  */
k210_register_aclk(struct device_node * np,struct k210_sysclk * ksc)647 static int __init k210_register_aclk(struct device_node *np,
648 				     struct k210_sysclk *ksc)
649 {
650 	struct clk_init_data init = {};
651 	const struct clk_parent_data parent_data[] = {
652 		{ /* .index = 0 for in0 */ },
653 		{ .hw = &ksc->plls[K210_PLL0].hw },
654 	};
655 	int ret;
656 
657 	init.name = "aclk";
658 	init.parent_data = parent_data;
659 	init.num_parents = 2;
660 	init.ops = &k210_aclk_ops;
661 	ksc->aclk.init = &init;
662 
663 	ret = of_clk_hw_register(np, &ksc->aclk);
664 	if (ret) {
665 		pr_err("%pOFP: register aclk failed\n", np);
666 		return ret;
667 	}
668 
669 	return 0;
670 }
671 
672 #define to_k210_clk(_hw)	container_of(_hw, struct k210_clk, hw)
673 
k210_clk_enable(struct clk_hw * hw)674 static int k210_clk_enable(struct clk_hw *hw)
675 {
676 	struct k210_clk *kclk = to_k210_clk(hw);
677 	struct k210_sysclk *ksc = kclk->ksc;
678 	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
679 	unsigned long flags;
680 	u32 reg;
681 
682 	if (!cfg->gate_reg)
683 		return 0;
684 
685 	spin_lock_irqsave(&ksc->clk_lock, flags);
686 	reg = readl(ksc->regs + cfg->gate_reg);
687 	reg |= BIT(cfg->gate_bit);
688 	writel(reg, ksc->regs + cfg->gate_reg);
689 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
690 
691 	return 0;
692 }
693 
k210_clk_disable(struct clk_hw * hw)694 static void k210_clk_disable(struct clk_hw *hw)
695 {
696 	struct k210_clk *kclk = to_k210_clk(hw);
697 	struct k210_sysclk *ksc = kclk->ksc;
698 	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
699 	unsigned long flags;
700 	u32 reg;
701 
702 	if (!cfg->gate_reg)
703 		return;
704 
705 	spin_lock_irqsave(&ksc->clk_lock, flags);
706 	reg = readl(ksc->regs + cfg->gate_reg);
707 	reg &= ~BIT(cfg->gate_bit);
708 	writel(reg, ksc->regs + cfg->gate_reg);
709 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
710 }
711 
k210_clk_set_parent(struct clk_hw * hw,u8 index)712 static int k210_clk_set_parent(struct clk_hw *hw, u8 index)
713 {
714 	struct k210_clk *kclk = to_k210_clk(hw);
715 	struct k210_sysclk *ksc = kclk->ksc;
716 	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
717 	unsigned long flags;
718 	u32 reg;
719 
720 	spin_lock_irqsave(&ksc->clk_lock, flags);
721 	reg = readl(ksc->regs + cfg->mux_reg);
722 	if (index)
723 		reg |= BIT(cfg->mux_bit);
724 	else
725 		reg &= ~BIT(cfg->mux_bit);
726 	writel(reg, ksc->regs + cfg->mux_reg);
727 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
728 
729 	return 0;
730 }
731 
k210_clk_get_parent(struct clk_hw * hw)732 static u8 k210_clk_get_parent(struct clk_hw *hw)
733 {
734 	struct k210_clk *kclk = to_k210_clk(hw);
735 	struct k210_sysclk *ksc = kclk->ksc;
736 	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
737 	unsigned long flags;
738 	u32 reg, idx;
739 
740 	spin_lock_irqsave(&ksc->clk_lock, flags);
741 	reg = readl(ksc->regs + cfg->mux_reg);
742 	idx = (reg & BIT(cfg->mux_bit)) ? 1 : 0;
743 	spin_unlock_irqrestore(&ksc->clk_lock, flags);
744 
745 	return idx;
746 }
747 
k210_clk_get_rate(struct clk_hw * hw,unsigned long parent_rate)748 static unsigned long k210_clk_get_rate(struct clk_hw *hw,
749 				       unsigned long parent_rate)
750 {
751 	struct k210_clk *kclk = to_k210_clk(hw);
752 	struct k210_sysclk *ksc = kclk->ksc;
753 	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
754 	u32 reg, div_val;
755 
756 	if (!cfg->div_reg)
757 		return parent_rate;
758 
759 	reg = readl(ksc->regs + cfg->div_reg);
760 	div_val = (reg >> cfg->div_shift) & GENMASK(cfg->div_width - 1, 0);
761 
762 	switch (cfg->div_type) {
763 	case K210_DIV_ONE_BASED:
764 		return parent_rate / (div_val + 1);
765 	case K210_DIV_DOUBLE_ONE_BASED:
766 		return parent_rate / ((div_val + 1) * 2);
767 	case K210_DIV_POWER_OF_TWO:
768 		return parent_rate / (2UL << div_val);
769 	case K210_DIV_NONE:
770 	default:
771 		return 0;
772 	}
773 }
774 
775 static const struct clk_ops k210_clk_mux_ops = {
776 	.enable		= k210_clk_enable,
777 	.disable	= k210_clk_disable,
778 	.determine_rate = clk_hw_determine_rate_no_reparent,
779 	.set_parent	= k210_clk_set_parent,
780 	.get_parent	= k210_clk_get_parent,
781 	.recalc_rate	= k210_clk_get_rate,
782 };
783 
784 static const struct clk_ops k210_clk_ops = {
785 	.enable		= k210_clk_enable,
786 	.disable	= k210_clk_disable,
787 	.recalc_rate	= k210_clk_get_rate,
788 };
789 
k210_register_clk(struct device_node * np,struct k210_sysclk * ksc,int id,const struct clk_parent_data * parent_data,int num_parents,unsigned long flags)790 static void __init k210_register_clk(struct device_node *np,
791 				     struct k210_sysclk *ksc, int id,
792 				     const struct clk_parent_data *parent_data,
793 				     int num_parents, unsigned long flags)
794 {
795 	struct k210_clk *kclk = &ksc->clks[id];
796 	struct clk_init_data init = {};
797 	int ret;
798 
799 	init.name = k210_clk_cfgs[id].name;
800 	init.flags = flags;
801 	init.parent_data = parent_data;
802 	init.num_parents = num_parents;
803 	if (num_parents > 1)
804 		init.ops = &k210_clk_mux_ops;
805 	else
806 		init.ops = &k210_clk_ops;
807 
808 	kclk->id = id;
809 	kclk->ksc = ksc;
810 	kclk->hw.init = &init;
811 
812 	ret = of_clk_hw_register(np, &kclk->hw);
813 	if (ret) {
814 		pr_err("%pOFP: register clock %s failed\n",
815 		       np, k210_clk_cfgs[id].name);
816 		kclk->id = -1;
817 	}
818 }
819 
820 /*
821  * All muxed clocks have IN0 and PLL0 as parents.
822  */
k210_register_mux_clk(struct device_node * np,struct k210_sysclk * ksc,int id)823 static inline void __init k210_register_mux_clk(struct device_node *np,
824 						struct k210_sysclk *ksc, int id)
825 {
826 	const struct clk_parent_data parent_data[2] = {
827 		{ /* .index = 0 for in0 */ },
828 		{ .hw = &ksc->plls[K210_PLL0].hw }
829 	};
830 
831 	k210_register_clk(np, ksc, id, parent_data, 2, 0);
832 }
833 
k210_register_in0_child(struct device_node * np,struct k210_sysclk * ksc,int id)834 static inline void __init k210_register_in0_child(struct device_node *np,
835 						struct k210_sysclk *ksc, int id)
836 {
837 	const struct clk_parent_data parent_data = {
838 		/* .index = 0 for in0 */
839 	};
840 
841 	k210_register_clk(np, ksc, id, &parent_data, 1, 0);
842 }
843 
k210_register_pll_child(struct device_node * np,struct k210_sysclk * ksc,int id,enum k210_pll_id pllid,unsigned long flags)844 static inline void __init k210_register_pll_child(struct device_node *np,
845 						struct k210_sysclk *ksc, int id,
846 						enum k210_pll_id pllid,
847 						unsigned long flags)
848 {
849 	const struct clk_parent_data parent_data = {
850 		.hw = &ksc->plls[pllid].hw,
851 	};
852 
853 	k210_register_clk(np, ksc, id, &parent_data, 1, flags);
854 }
855 
k210_register_aclk_child(struct device_node * np,struct k210_sysclk * ksc,int id,unsigned long flags)856 static inline void __init k210_register_aclk_child(struct device_node *np,
857 						struct k210_sysclk *ksc, int id,
858 						unsigned long flags)
859 {
860 	const struct clk_parent_data parent_data = {
861 		.hw = &ksc->aclk,
862 	};
863 
864 	k210_register_clk(np, ksc, id, &parent_data, 1, flags);
865 }
866 
k210_register_clk_child(struct device_node * np,struct k210_sysclk * ksc,int id,int parent_id)867 static inline void __init k210_register_clk_child(struct device_node *np,
868 						struct k210_sysclk *ksc, int id,
869 						int parent_id)
870 {
871 	const struct clk_parent_data parent_data = {
872 		.hw = &ksc->clks[parent_id].hw,
873 	};
874 
875 	k210_register_clk(np, ksc, id, &parent_data, 1, 0);
876 }
877 
k210_clk_hw_onecell_get(struct of_phandle_args * clkspec,void * data)878 static struct clk_hw *k210_clk_hw_onecell_get(struct of_phandle_args *clkspec,
879 					      void *data)
880 {
881 	struct k210_sysclk *ksc = data;
882 	unsigned int idx = clkspec->args[0];
883 
884 	if (idx >= K210_NUM_CLKS)
885 		return ERR_PTR(-EINVAL);
886 
887 	return &ksc->clks[idx].hw;
888 }
889 
k210_clk_init(struct device_node * np)890 static void __init k210_clk_init(struct device_node *np)
891 {
892 	struct device_node *sysctl_np;
893 	struct k210_sysclk *ksc;
894 	int i, ret;
895 
896 	ksc = kzalloc(sizeof(*ksc), GFP_KERNEL);
897 	if (!ksc)
898 		return;
899 
900 	spin_lock_init(&ksc->clk_lock);
901 	sysctl_np = of_get_parent(np);
902 	ksc->regs = of_iomap(sysctl_np, 0);
903 	of_node_put(sysctl_np);
904 	if (!ksc->regs) {
905 		pr_err("%pOFP: failed to map registers\n", np);
906 		return;
907 	}
908 
909 	ret = k210_register_plls(np, ksc);
910 	if (ret)
911 		return;
912 
913 	ret = k210_register_aclk(np, ksc);
914 	if (ret)
915 		return;
916 
917 	/*
918 	 * Critical clocks: there are no consumers of the SRAM clocks,
919 	 * including the AI clock for the third SRAM bank. The CPU clock
920 	 * is only referenced by the uarths serial device and so would be
921 	 * disabled if the serial console is disabled to switch to another
922 	 * console. Mark all these clocks as critical so that they are never
923 	 * disabled by the core clock management.
924 	 */
925 	k210_register_aclk_child(np, ksc, K210_CLK_CPU, CLK_IS_CRITICAL);
926 	k210_register_aclk_child(np, ksc, K210_CLK_SRAM0, CLK_IS_CRITICAL);
927 	k210_register_aclk_child(np, ksc, K210_CLK_SRAM1, CLK_IS_CRITICAL);
928 	k210_register_pll_child(np, ksc, K210_CLK_AI, K210_PLL1,
929 				CLK_IS_CRITICAL);
930 
931 	/* Clocks with aclk as source */
932 	k210_register_aclk_child(np, ksc, K210_CLK_DMA, 0);
933 	k210_register_aclk_child(np, ksc, K210_CLK_FFT, 0);
934 	k210_register_aclk_child(np, ksc, K210_CLK_ROM, 0);
935 	k210_register_aclk_child(np, ksc, K210_CLK_DVP, 0);
936 	k210_register_aclk_child(np, ksc, K210_CLK_APB0, 0);
937 	k210_register_aclk_child(np, ksc, K210_CLK_APB1, 0);
938 	k210_register_aclk_child(np, ksc, K210_CLK_APB2, 0);
939 
940 	/* Clocks with PLL0 as source */
941 	k210_register_pll_child(np, ksc, K210_CLK_SPI0, K210_PLL0, 0);
942 	k210_register_pll_child(np, ksc, K210_CLK_SPI1, K210_PLL0, 0);
943 	k210_register_pll_child(np, ksc, K210_CLK_SPI2, K210_PLL0, 0);
944 	k210_register_pll_child(np, ksc, K210_CLK_I2C0, K210_PLL0, 0);
945 	k210_register_pll_child(np, ksc, K210_CLK_I2C1, K210_PLL0, 0);
946 	k210_register_pll_child(np, ksc, K210_CLK_I2C2, K210_PLL0, 0);
947 
948 	/* Clocks with PLL2 as source */
949 	k210_register_pll_child(np, ksc, K210_CLK_I2S0, K210_PLL2, 0);
950 	k210_register_pll_child(np, ksc, K210_CLK_I2S1, K210_PLL2, 0);
951 	k210_register_pll_child(np, ksc, K210_CLK_I2S2, K210_PLL2, 0);
952 	k210_register_pll_child(np, ksc, K210_CLK_I2S0_M, K210_PLL2, 0);
953 	k210_register_pll_child(np, ksc, K210_CLK_I2S1_M, K210_PLL2, 0);
954 	k210_register_pll_child(np, ksc, K210_CLK_I2S2_M, K210_PLL2, 0);
955 
956 	/* Clocks with IN0 as source */
957 	k210_register_in0_child(np, ksc, K210_CLK_WDT0);
958 	k210_register_in0_child(np, ksc, K210_CLK_WDT1);
959 	k210_register_in0_child(np, ksc, K210_CLK_RTC);
960 
961 	/* Clocks with APB0 as source */
962 	k210_register_clk_child(np, ksc, K210_CLK_GPIO, K210_CLK_APB0);
963 	k210_register_clk_child(np, ksc, K210_CLK_UART1, K210_CLK_APB0);
964 	k210_register_clk_child(np, ksc, K210_CLK_UART2, K210_CLK_APB0);
965 	k210_register_clk_child(np, ksc, K210_CLK_UART3, K210_CLK_APB0);
966 	k210_register_clk_child(np, ksc, K210_CLK_FPIOA, K210_CLK_APB0);
967 	k210_register_clk_child(np, ksc, K210_CLK_SHA, K210_CLK_APB0);
968 
969 	/* Clocks with APB1 as source */
970 	k210_register_clk_child(np, ksc, K210_CLK_AES, K210_CLK_APB1);
971 	k210_register_clk_child(np, ksc, K210_CLK_OTP, K210_CLK_APB1);
972 
973 	/* Mux clocks with in0 or pll0 as source */
974 	k210_register_mux_clk(np, ksc, K210_CLK_SPI3);
975 	k210_register_mux_clk(np, ksc, K210_CLK_TIMER0);
976 	k210_register_mux_clk(np, ksc, K210_CLK_TIMER1);
977 	k210_register_mux_clk(np, ksc, K210_CLK_TIMER2);
978 
979 	/* Check for registration errors */
980 	for (i = 0; i < K210_NUM_CLKS; i++) {
981 		if (ksc->clks[i].id != i)
982 			return;
983 	}
984 
985 	ret = of_clk_add_hw_provider(np, k210_clk_hw_onecell_get, ksc);
986 	if (ret) {
987 		pr_err("%pOFP: add clock provider failed %d\n", np, ret);
988 		return;
989 	}
990 
991 	pr_info("%pOFP: CPU running at %lu MHz\n",
992 		np, clk_hw_get_rate(&ksc->clks[K210_CLK_CPU].hw) / 1000000);
993 }
994 
995 CLK_OF_DECLARE(k210_clk, "canaan,k210-clk", k210_clk_init);
996 
997 /*
998  * Enable PLL1 to be able to use the AI SRAM.
999  */
k210_clk_early_init(void __iomem * regs)1000 void __init k210_clk_early_init(void __iomem *regs)
1001 {
1002 	struct k210_pll pll1;
1003 
1004 	/* Make sure ACLK selector is set to PLL0 */
1005 	k210_aclk_set_selector(regs, 1);
1006 
1007 	/* Startup PLL1 to enable the aisram bank for general memory use */
1008 	k210_init_pll(regs, K210_PLL1, &pll1);
1009 	k210_pll_enable_hw(regs, &pll1);
1010 }
1011