1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/rockchip.h>
8#include <dt-bindings/soc/rockchip,vop2.h>
9#include "rk3568.dtsi"
10
11/ {
12	model = "Radxa ROCK 3B";
13	compatible = "radxa,rock-3b", "rockchip,rk3568";
14
15	aliases {
16		ethernet0 = &gmac0;
17		ethernet1 = &gmac1;
18		mmc0 = &sdhci;
19		mmc1 = &sdmmc0;
20		mmc2 = &sdmmc2;
21	};
22
23	chosen {
24		stdout-path = "serial2:1500000n8";
25	};
26
27	hdmi-con {
28		compatible = "hdmi-connector";
29		type = "a";
30
31		port {
32			hdmi_con_in: endpoint {
33				remote-endpoint = <&hdmi_out_con>;
34			};
35		};
36	};
37
38	ir-receiver {
39		compatible = "gpio-ir-receiver";
40		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
41		pinctrl-names = "default";
42		pinctrl-0 = <&pwm3_ir>;
43	};
44
45	leds {
46		compatible = "gpio-leds";
47		pinctrl-names = "default";
48		pinctrl-0 = <&led>;
49
50		led-0 {
51			color = <LED_COLOR_ID_GREEN>;
52			default-state = "on";
53			function = LED_FUNCTION_HEARTBEAT;
54			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
55			linux,default-trigger = "heartbeat";
56		};
57	};
58
59	/* pi6c pcie clock generator */
60	vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 {
61		compatible = "regulator-fixed";
62		enable-active-high;
63		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
64		pinctrl-names = "default";
65		pinctrl-0 = <&pcie_pwren_h>;
66		regulator-name = "vcc3v3_pi6c_03";
67		regulator-always-on;
68		regulator-boot-on;
69		regulator-min-microvolt = <3300000>;
70		regulator-max-microvolt = <3300000>;
71		startup-delay-us = <10000>;
72		vin-supply = <&vcc5v0_sys>;
73	};
74
75	vcc3v3_sys: regulator-3v3-vcc-sys {
76		compatible = "regulator-fixed";
77		regulator-name = "vcc3v3_sys";
78		regulator-always-on;
79		regulator-boot-on;
80		regulator-min-microvolt = <3300000>;
81		regulator-max-microvolt = <3300000>;
82		vin-supply = <&vcc5v0_sys>;
83	};
84
85	vcc3v3_sys2: regulator-3v3-vcc-sys2 {
86		compatible = "regulator-fixed";
87		regulator-name = "vcc3v3_sys2";
88		regulator-always-on;
89		regulator-boot-on;
90		regulator-min-microvolt = <3300000>;
91		regulator-max-microvolt = <3300000>;
92		vin-supply = <&vcc5v0_sys>;
93	};
94
95	vcc5v0_sys: regulator-5v0-vcc-sys {
96		compatible = "regulator-fixed";
97		regulator-name = "vcc5v0_sys";
98		regulator-always-on;
99		regulator-boot-on;
100		regulator-min-microvolt = <5000000>;
101		regulator-max-microvolt = <5000000>;
102	};
103
104	vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
105		compatible = "regulator-fixed";
106		enable-active-high;
107		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
108		pinctrl-names = "default";
109		pinctrl-0 = <&usb_host_pwren_h>;
110		regulator-name = "vcc5v0_usb_host";
111		regulator-min-microvolt = <5000000>;
112		regulator-max-microvolt = <5000000>;
113		vin-supply = <&vcc5v0_sys>;
114	};
115
116	vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
117		compatible = "regulator-fixed";
118		enable-active-high;
119		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
120		pinctrl-names = "default";
121		pinctrl-0 = <&usb_otg_pwren_h>;
122		regulator-name = "vcc5v0_usb_otg";
123		regulator-min-microvolt = <5000000>;
124		regulator-max-microvolt = <5000000>;
125		vin-supply = <&vcc5v0_sys>;
126	};
127
128	sdio_pwrseq: sdio-pwrseq {
129		compatible = "mmc-pwrseq-simple";
130		clocks = <&rk809 1>;
131		clock-names = "ext_clock";
132		pinctrl-names = "default";
133		pinctrl-0 = <&wifi_reg_on_h>;
134		post-power-on-delay-ms = <100>;
135		power-off-delay-us = <5000000>;
136		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
137	};
138
139	sound {
140		compatible = "simple-audio-card";
141		simple-audio-card,format = "i2s";
142		simple-audio-card,name = "Analog RK809";
143		simple-audio-card,mclk-fs = <256>;
144
145		simple-audio-card,cpu {
146			sound-dai = <&i2s1_8ch>;
147		};
148
149		simple-audio-card,codec {
150			sound-dai = <&rk809>;
151		};
152	};
153};
154
155&combphy0 {
156	status = "okay";
157};
158
159&combphy1 {
160	status = "okay";
161};
162
163&combphy2 {
164	status = "okay";
165};
166
167&cpu0 {
168	cpu-supply = <&vdd_cpu>;
169};
170
171&cpu1 {
172	cpu-supply = <&vdd_cpu>;
173};
174
175&cpu2 {
176	cpu-supply = <&vdd_cpu>;
177};
178
179&cpu3 {
180	cpu-supply = <&vdd_cpu>;
181};
182
183&gmac0 {
184	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
185	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
186	clock_in_out = "input";
187	phy-handle = <&rgmii_phy0>;
188	phy-mode = "rgmii-id";
189	phy-supply = <&vcc_3v3>;
190	pinctrl-names = "default";
191	pinctrl-0 = <&gmac0_miim
192		     &gmac0_tx_bus2
193		     &gmac0_rx_bus2
194		     &gmac0_rgmii_clk
195		     &gmac0_rgmii_bus
196		     &gmac0_clkinout>;
197	status = "okay";
198};
199
200&gmac1 {
201	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
202	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
203	clock_in_out = "input";
204	phy-handle = <&rgmii_phy1>;
205	phy-mode = "rgmii-id";
206	phy-supply = <&vcc_3v3>;
207	pinctrl-names = "default";
208	pinctrl-0 = <&gmac1m1_miim
209		     &gmac1m1_tx_bus2
210		     &gmac1m1_rx_bus2
211		     &gmac1m1_rgmii_clk
212		     &gmac1m1_rgmii_bus
213		     &gmac1m1_clkinout>;
214	status = "okay";
215};
216
217&gpu {
218	mali-supply = <&vdd_gpu>;
219	status = "okay";
220};
221
222&hdmi {
223	avdd-0v9-supply = <&vdda0v9_image>;
224	avdd-1v8-supply = <&vcca1v8_image>;
225	status = "okay";
226};
227
228&hdmi_in {
229	hdmi_in_vp0: endpoint {
230		remote-endpoint = <&vp0_out_hdmi>;
231	};
232};
233
234&hdmi_out {
235	hdmi_out_con: endpoint {
236		remote-endpoint = <&hdmi_con_in>;
237	};
238};
239
240&hdmi_sound {
241	status = "okay";
242};
243
244&i2c0 {
245	status = "okay";
246
247	vdd_cpu: regulator@1c {
248		compatible = "tcs,tcs4525";
249		reg = <0x1c>;
250		fcs,suspend-voltage-selector = <1>;
251		regulator-name = "vdd_cpu";
252		regulator-always-on;
253		regulator-boot-on;
254		regulator-min-microvolt = <800000>;
255		regulator-max-microvolt = <1150000>;
256		regulator-ramp-delay = <2300>;
257		vin-supply = <&vcc5v0_sys>;
258
259		regulator-state-mem {
260			regulator-off-in-suspend;
261		};
262	};
263
264	rk809: pmic@20 {
265		compatible = "rockchip,rk809";
266		reg = <0x20>;
267		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
268		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
269		#clock-cells = <1>;
270		clocks = <&cru I2S1_MCLKOUT_TX>;
271		clock-names = "mclk";
272		clock-output-names = "rk809-clkout1", "rk809-clkout2";
273		interrupt-parent = <&gpio0>;
274		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
275		pinctrl-names = "default";
276		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
277		#sound-dai-cells = <0>;
278		system-power-controller;
279		wakeup-source;
280
281		vcc1-supply = <&vcc3v3_sys>;
282		vcc2-supply = <&vcc3v3_sys>;
283		vcc3-supply = <&vcc3v3_sys>;
284		vcc4-supply = <&vcc3v3_sys>;
285		vcc5-supply = <&vcc3v3_sys>;
286		vcc6-supply = <&vcc3v3_sys>;
287		vcc7-supply = <&vcc3v3_sys>;
288		vcc8-supply = <&vcc3v3_sys>;
289		vcc9-supply = <&vcc3v3_sys>;
290
291		regulators {
292			vdd_logic: DCDC_REG1 {
293				regulator-name = "vdd_logic";
294				regulator-always-on;
295				regulator-boot-on;
296				regulator-initial-mode = <0x2>;
297				regulator-min-microvolt = <500000>;
298				regulator-max-microvolt = <1350000>;
299				regulator-ramp-delay = <6001>;
300
301				regulator-state-mem {
302					regulator-off-in-suspend;
303				};
304			};
305
306			vdd_gpu: DCDC_REG2 {
307				regulator-name = "vdd_gpu";
308				regulator-always-on;
309				regulator-boot-on;
310				regulator-initial-mode = <0x2>;
311				regulator-min-microvolt = <500000>;
312				regulator-max-microvolt = <1350000>;
313				regulator-ramp-delay = <6001>;
314
315				regulator-state-mem {
316					regulator-off-in-suspend;
317				};
318			};
319
320			vcc_ddr: DCDC_REG3 {
321				regulator-name = "vcc_ddr";
322				regulator-always-on;
323				regulator-boot-on;
324				regulator-initial-mode = <0x2>;
325
326				regulator-state-mem {
327					regulator-on-in-suspend;
328				};
329			};
330
331			vdd_npu: DCDC_REG4 {
332				regulator-name = "vdd_npu";
333				regulator-initial-mode = <0x2>;
334				regulator-min-microvolt = <500000>;
335				regulator-max-microvolt = <1350000>;
336				regulator-ramp-delay = <6001>;
337
338				regulator-state-mem {
339					regulator-off-in-suspend;
340				};
341			};
342
343			vcc_1v8: DCDC_REG5 {
344				regulator-name = "vcc_1v8";
345				regulator-always-on;
346				regulator-boot-on;
347				regulator-min-microvolt = <1800000>;
348				regulator-max-microvolt = <1800000>;
349
350				regulator-state-mem {
351					regulator-off-in-suspend;
352				};
353			};
354
355			vdda0v9_image: LDO_REG1 {
356				regulator-name = "vdda0v9_image";
357				regulator-min-microvolt = <900000>;
358				regulator-max-microvolt = <900000>;
359
360				regulator-state-mem {
361					regulator-off-in-suspend;
362				};
363			};
364
365			vdda_0v9: LDO_REG2 {
366				regulator-name = "vdda_0v9";
367				regulator-always-on;
368				regulator-boot-on;
369				regulator-min-microvolt = <900000>;
370				regulator-max-microvolt = <900000>;
371
372				regulator-state-mem {
373					regulator-off-in-suspend;
374				};
375			};
376
377			vdda0v9_pmu: LDO_REG3 {
378				regulator-name = "vdda0v9_pmu";
379				regulator-always-on;
380				regulator-boot-on;
381				regulator-min-microvolt = <900000>;
382				regulator-max-microvolt = <900000>;
383
384				regulator-state-mem {
385					regulator-on-in-suspend;
386					regulator-suspend-microvolt = <900000>;
387				};
388			};
389
390			vccio_acodec: LDO_REG4 {
391				regulator-name = "vccio_acodec";
392				regulator-always-on;
393				regulator-boot-on;
394				regulator-min-microvolt = <3300000>;
395				regulator-max-microvolt = <3300000>;
396
397				regulator-state-mem {
398					regulator-off-in-suspend;
399				};
400			};
401
402			vccio_sd: LDO_REG5 {
403				regulator-name = "vccio_sd";
404				regulator-always-on;
405				regulator-boot-on;
406				regulator-min-microvolt = <1800000>;
407				regulator-max-microvolt = <3300000>;
408
409				regulator-state-mem {
410					regulator-off-in-suspend;
411				};
412			};
413
414			vcc3v3_pmu: LDO_REG6 {
415				regulator-name = "vcc3v3_pmu";
416				regulator-always-on;
417				regulator-boot-on;
418				regulator-min-microvolt = <3300000>;
419				regulator-max-microvolt = <3300000>;
420
421				regulator-state-mem {
422					regulator-on-in-suspend;
423					regulator-suspend-microvolt = <3300000>;
424				};
425			};
426
427			vcca_1v8: LDO_REG7 {
428				regulator-name = "vcca_1v8";
429				regulator-always-on;
430				regulator-boot-on;
431				regulator-min-microvolt = <1800000>;
432				regulator-max-microvolt = <1800000>;
433
434				regulator-state-mem {
435					regulator-off-in-suspend;
436				};
437			};
438
439			vcca1v8_pmu: LDO_REG8 {
440				regulator-name = "vcca1v8_pmu";
441				regulator-always-on;
442				regulator-boot-on;
443				regulator-min-microvolt = <1800000>;
444				regulator-max-microvolt = <1800000>;
445
446				regulator-state-mem {
447					regulator-on-in-suspend;
448					regulator-suspend-microvolt = <1800000>;
449				};
450			};
451
452			vcca1v8_image: LDO_REG9 {
453				regulator-name = "vcca1v8_image";
454				regulator-min-microvolt = <1800000>;
455				regulator-max-microvolt = <1800000>;
456
457				regulator-state-mem {
458					regulator-off-in-suspend;
459				};
460			};
461
462			vcc_3v3: SWITCH_REG1 {
463				regulator-name = "vcc_3v3";
464				regulator-always-on;
465				regulator-boot-on;
466
467				regulator-state-mem {
468					regulator-off-in-suspend;
469				};
470			};
471
472			vcc3v3_sd: SWITCH_REG2 {
473				regulator-name = "vcc3v3_sd";
474				regulator-always-on;
475				regulator-boot-on;
476
477				regulator-state-mem {
478					regulator-off-in-suspend;
479				};
480			};
481		};
482	};
483};
484
485&i2c5 {
486	status = "okay";
487
488	hym8563: rtc@51 {
489		compatible = "haoyu,hym8563";
490		reg = <0x51>;
491		interrupt-parent = <&gpio0>;
492		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
493		#clock-cells = <0>;
494		clock-output-names = "rtcic_32kout";
495		pinctrl-names = "default";
496		pinctrl-0 = <&rtcic_int_l>;
497		wakeup-source;
498	};
499};
500
501&i2s0_8ch {
502	status = "okay";
503};
504
505&i2s1_8ch {
506	pinctrl-names = "default";
507	pinctrl-0 = <&i2s1m0_sclktx
508		     &i2s1m0_lrcktx
509		     &i2s1m0_sdi0
510		     &i2s1m0_sdo0>;
511	rockchip,trcm-sync-tx-only;
512	status = "okay";
513};
514
515&mdio0 {
516	rgmii_phy0: ethernet-phy@1 {
517		compatible = "ethernet-phy-ieee802.3-c22";
518		reg = <1>;
519		reset-assert-us = <20000>;
520		reset-deassert-us = <50000>;
521		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
522	};
523};
524
525&mdio1 {
526	rgmii_phy1: ethernet-phy@1 {
527		compatible = "ethernet-phy-ieee802.3-c22";
528		reg = <1>;
529		reset-assert-us = <20000>;
530		reset-deassert-us = <50000>;
531		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
532	};
533};
534
535&pcie2x1 {
536	pinctrl-names = "default";
537	pinctrl-0 = <&pcie20m1_pins>;
538	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
539	vpcie3v3-supply = <&vcc3v3_sys2>;
540	status = "okay";
541};
542
543&pcie30phy {
544	status = "okay";
545};
546
547&pcie3x2 {
548	pinctrl-names = "default";
549	pinctrl-0 = <&pcie30x2m1_pins>;
550	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
551	status = "okay";
552};
553
554&pinctrl {
555	bluetooth {
556		bt_reg_on_h: bt-reg-on-h {
557			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
558		};
559
560		bt_wake_host_h: bt-wake-host-h {
561			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
562		};
563
564		host_wake_bt_h: host-wake-bt-h {
565			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
566		};
567	};
568
569	ir-receiver {
570		pwm3_ir: pwm3-ir {
571			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
572		};
573	};
574
575	leds {
576		led: led {
577			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
578		};
579	};
580
581	pcie {
582		pcie_pwren_h: pcie-pwren-h {
583			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
584		};
585	};
586
587	pcie20 {
588		pcie20m1_pins: pcie20m1-pins {
589			rockchip,pins =
590				<2 RK_PD0 4 &pcfg_pull_none>,
591				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,
592				<2 RK_PD1 4 &pcfg_pull_none>;
593		};
594	};
595
596	pcie30x2 {
597		pcie30x2m1_pins: pcie30x2m1-pins {
598			rockchip,pins =
599				<2 RK_PD4 4 &pcfg_pull_none>,
600				<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,
601				<2 RK_PD5 4 &pcfg_pull_none>;
602		};
603	};
604
605	pmic {
606		pmic_int_l: pmic-int-l {
607			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
608		};
609	};
610
611	rtc {
612		rtcic_int_l: rtcic-int-l {
613			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
614		};
615	};
616
617	usb {
618		usb_host_pwren_h: usb-host-pwren-h {
619			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
620		};
621
622		usb_otg_pwren_h: usb-otg-pwren-h {
623			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
624		};
625	};
626
627	wifi {
628		wifi_reg_on_h: wifi-reg-on-h {
629			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
630		};
631
632		wifi_wake_host_h: wifi-wake-host-h {
633			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
634		};
635	};
636};
637
638&pmu_io_domains {
639	pmuio1-supply = <&vcc3v3_pmu>;
640	pmuio2-supply = <&vcc3v3_pmu>;
641	vccio1-supply = <&vccio_acodec>;
642	vccio2-supply = <&vcc_1v8>;
643	vccio3-supply = <&vccio_sd>;
644	vccio4-supply = <&vcc_1v8>;
645	vccio5-supply = <&vcc_3v3>;
646	vccio6-supply = <&vcc_1v8>;
647	vccio7-supply = <&vcc_3v3>;
648	status = "okay";
649};
650
651&saradc {
652	vref-supply = <&vcca_1v8>;
653	status = "okay";
654};
655
656&sdhci {
657	bus-width = <8>;
658	cap-mmc-highspeed;
659	max-frequency = <200000000>;
660	mmc-hs200-1_8v;
661	non-removable;
662	pinctrl-names = "default";
663	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
664	vmmc-supply = <&vcc_3v3>;
665	vqmmc-supply = <&vcc_1v8>;
666	status = "okay";
667};
668
669&sdmmc0 {
670	bus-width = <4>;
671	cap-sd-highspeed;
672	disable-wp;
673	pinctrl-names = "default";
674	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
675	vmmc-supply = <&vcc3v3_sd>;
676	vqmmc-supply = <&vccio_sd>;
677	status = "okay";
678};
679
680&sdmmc2 {
681	bus-width = <4>;
682	cap-sd-highspeed;
683	cap-sdio-irq;
684	keep-power-in-suspend;
685	mmc-pwrseq = <&sdio_pwrseq>;
686	non-removable;
687	pinctrl-names = "default";
688	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>;
689	sd-uhs-sdr104;
690	vmmc-supply = <&vcc3v3_sys2>;
691	vqmmc-supply = <&vcc_1v8>;
692	status = "disabled";
693};
694
695&sfc {
696	#address-cells = <1>;
697	#size-cells = <0>;
698	status = "okay";
699
700	flash@0 {
701		compatible = "jedec,spi-nor";
702		reg = <0>;
703		spi-max-frequency = <104000000>;
704		spi-rx-bus-width = <4>;
705		spi-tx-bus-width = <1>;
706	};
707};
708
709&tsadc {
710	rockchip,hw-tshut-mode = <1>;
711	rockchip,hw-tshut-polarity = <0>;
712	status = "okay";
713};
714
715&uart2 {
716	status = "okay";
717};
718
719&uart8 {
720	pinctrl-names = "default";
721	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>;
722	uart-has-rtscts;
723	status = "disabled";
724};
725
726&usb_host0_ehci {
727	status = "okay";
728};
729
730&usb_host0_ohci {
731	status = "okay";
732};
733
734&usb_host0_xhci {
735	extcon = <&usb2phy0>;
736	status = "okay";
737};
738
739&usb_host1_xhci {
740	status = "okay";
741};
742
743&usb2phy0 {
744	status = "okay";
745};
746
747&usb2phy0_host {
748	phy-supply = <&vcc5v0_usb_host>;
749	status = "okay";
750};
751
752&usb2phy0_otg {
753	phy-supply = <&vcc5v0_usb_otg>;
754	status = "okay";
755};
756
757&usb2phy1 {
758	status = "okay";
759};
760
761&usb2phy1_otg {
762	phy-supply = <&vcc5v0_usb_host>;
763	status = "okay";
764};
765
766&vop {
767	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
768	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
769	status = "okay";
770};
771
772&vop_mmu {
773	status = "okay";
774};
775
776&vp0 {
777	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
778		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
779		remote-endpoint = <&hdmi_in_vp0>;
780	};
781};
782