1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/* Copyright 2018 Google LLC. */
3
4#include <dt-bindings/iio/qcom,spmi-vadc.h>
5#include <dt-bindings/input/linux-event-codes.h>
6#include <dt-bindings/interrupt-controller/irq.h>
7#include <dt-bindings/spmi/spmi.h>
8#include <dt-bindings/thermal/thermal.h>
9
10/ {
11	thermal-zones {
12		pm8998-thermal {
13			polling-delay-passive = <250>;
14
15			thermal-sensors = <&pm8998_temp>;
16
17			trips {
18				pm8998_alert0: pm8998-alert0 {
19					temperature = <105000>;
20					hysteresis = <2000>;
21					type = "passive";
22				};
23				pm8998_crit: pm8998-crit {
24					temperature = <125000>;
25					hysteresis = <2000>;
26					type = "critical";
27				};
28			};
29		};
30	};
31};
32
33&spmi_bus {
34	pm8998_lsid0: pmic@0 {
35		compatible = "qcom,pm8998", "qcom,spmi-pmic";
36		reg = <0x0 SPMI_USID>;
37		#address-cells = <1>;
38		#size-cells = <0>;
39
40		pm8998_pon: pon@800 {
41			compatible = "qcom,pm8998-pon";
42
43			reg = <0x800>;
44			mode-bootloader = <0x2>;
45			mode-recovery = <0x1>;
46
47			pm8998_pwrkey: pwrkey {
48				compatible = "qcom,pm8941-pwrkey";
49				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
50				debounce = <15625>;
51				bias-pull-up;
52				linux,code = <KEY_POWER>;
53			};
54
55			pm8998_resin: resin {
56				compatible = "qcom,pm8941-resin";
57				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
58				debounce = <15625>;
59				bias-pull-up;
60				status = "disabled";
61			};
62		};
63
64		pm8998_temp: temp-alarm@2400 {
65			compatible = "qcom,spmi-temp-alarm";
66			reg = <0x2400>;
67			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
68			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
69			io-channel-names = "thermal";
70			#thermal-sensor-cells = <0>;
71		};
72
73		pm8998_coincell: charger@2800 {
74			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
75			reg = <0x2800>;
76
77			status = "disabled";
78		};
79
80		pm8998_adc: adc@3100 {
81			compatible = "qcom,spmi-adc-rev2";
82			reg = <0x3100>;
83			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
84			#address-cells = <1>;
85			#size-cells = <0>;
86			#io-channel-cells = <1>;
87
88			channel@6 {
89				reg = <ADC5_DIE_TEMP>;
90				label = "die_temp";
91			};
92		};
93
94		pm8998_adc_tm: adc-tm@3400 {
95			compatible = "qcom,spmi-adc-tm-hc";
96			reg = <0x3400>;
97			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
98			#thermal-sensor-cells = <1>;
99			#address-cells = <1>;
100			#size-cells = <0>;
101			status = "disabled";
102		};
103
104		rtc@6000 {
105			compatible = "qcom,pm8941-rtc";
106			reg = <0x6000>, <0x6100>;
107			reg-names = "rtc", "alarm";
108			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
109		};
110
111		pm8998_gpios: gpio@c000 {
112			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
113			reg = <0xc000>;
114			gpio-controller;
115			gpio-ranges = <&pm8998_gpios 0 0 26>;
116			#gpio-cells = <2>;
117			interrupt-controller;
118			#interrupt-cells = <2>;
119		};
120
121	};
122
123	pm8998_lsid1: pmic@1 {
124		compatible = "qcom,pm8998", "qcom,spmi-pmic";
125		reg = <0x1 SPMI_USID>;
126		#address-cells = <1>;
127		#size-cells = <0>;
128	};
129};
130