1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2020 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/leds/common.h>
8#include <dt-bindings/phy/phy-imx8-pcie.h>
9
10/ {
11	aliases {
12		usb0 = &usbotg1;
13		usb1 = &usbotg2;
14	};
15
16	led-controller {
17		compatible = "gpio-leds";
18		pinctrl-names = "default";
19		pinctrl-0 = <&pinctrl_gpio_leds>;
20
21		led-0 {
22			function = LED_FUNCTION_STATUS;
23			color = <LED_COLOR_ID_GREEN>;
24			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
25			default-state = "on";
26			linux,default-trigger = "heartbeat";
27		};
28
29		led-1 {
30			function = LED_FUNCTION_STATUS;
31			color = <LED_COLOR_ID_RED>;
32			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
33			default-state = "off";
34		};
35	};
36
37	pcie0_refclk: pcie0-refclk {
38		compatible = "fixed-clock";
39		#clock-cells = <0>;
40		clock-frequency = <100000000>;
41	};
42
43	pps {
44		compatible = "pps-gpio";
45		pinctrl-names = "default";
46		pinctrl-0 = <&pinctrl_pps>;
47		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
48		status = "okay";
49	};
50};
51
52&ecspi2 {
53	pinctrl-names = "default";
54	pinctrl-0 = <&pinctrl_spi2>;
55	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
56		   <&gpio1 10 GPIO_ACTIVE_LOW>;
57	status = "okay";
58
59	tpm@1 {
60		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
61		reg = <0x1>;
62		spi-max-frequency = <36000000>;
63	};
64};
65
66&gpio1 {
67	gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
68		"", "dio1", "", "", "", "", "", "",
69		"", "", "", "", "", "", "", "",
70		"", "", "", "", "", "", "", "";
71};
72
73&gpio4 {
74	gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
75		"", "", "", "", "", "", "", "",
76		"", "", "", "", "", "", "", "",
77		"", "", "", "", "", "", "", "";
78};
79
80&i2c2 {
81	clock-frequency = <400000>;
82	pinctrl-names = "default";
83	pinctrl-0 = <&pinctrl_i2c2>;
84	status = "okay";
85
86	accelerometer@19 {
87		pinctrl-names = "default";
88		pinctrl-0 = <&pinctrl_accel>;
89		compatible = "st,lis2de12";
90		reg = <0x19>;
91		st,drdy-int-pin = <1>;
92		interrupt-parent = <&gpio4>;
93		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
94	};
95};
96
97/* off-board header */
98&i2c3 {
99	clock-frequency = <400000>;
100	pinctrl-names = "default";
101	pinctrl-0 = <&pinctrl_i2c3>;
102	status = "okay";
103};
104
105&pcie_phy {
106	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
107	fsl,clkreq-unsupported;
108	clocks = <&pcie0_refclk>;
109	clock-names = "ref";
110	status = "okay";
111};
112
113&pcie0 {
114	pinctrl-names = "default";
115	pinctrl-0 = <&pinctrl_pcie0>;
116	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
117	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
118		 <&clk IMX8MM_CLK_PCIE1_AUX>;
119	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
120			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
121	assigned-clock-rates = <10000000>, <250000000>;
122	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
123				 <&clk IMX8MM_SYS_PLL2_250M>;
124	status = "okay";
125};
126
127/* GPS */
128&uart1 {
129	pinctrl-names = "default";
130	pinctrl-0 = <&pinctrl_uart1>;
131	status = "okay";
132};
133
134/* off-board header */
135&uart3 {
136	pinctrl-names = "default";
137	pinctrl-0 = <&pinctrl_uart3>;
138	status = "okay";
139};
140
141&usbotg1 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_usbotg1>;
144	dr_mode = "otg";
145	over-current-active-low;
146	status = "okay";
147};
148
149&usbotg2 {
150	dr_mode = "host";
151	disable-over-current;
152	status = "okay";
153};
154
155&iomuxc {
156	pinctrl-names = "default";
157	pinctrl-0 = <&pinctrl_hog>;
158
159	pinctrl_hog: hoggrp {
160		fsl,pins = <
161			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
162			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
163			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
164			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
165			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
166			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000041 /* DIO2 */
167			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIO2 */
168		>;
169	};
170
171	pinctrl_accel: accelgrp {
172		fsl,pins = <
173			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
174		>;
175	};
176
177	pinctrl_gpio_leds: gpioledgrp {
178		fsl,pins = <
179			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
180			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
181		>;
182	};
183
184	pinctrl_i2c3: i2c3grp {
185		fsl,pins = <
186			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
187			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
188		>;
189	};
190
191	pinctrl_pcie0: pcie0grp {
192		fsl,pins = <
193			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
194		>;
195	};
196
197	pinctrl_pps: ppsgrp {
198		fsl,pins = <
199			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
200		>;
201	};
202
203	pinctrl_spi2: spi2grp {
204		fsl,pins = <
205			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
206			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
207			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
208			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
209			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
210		>;
211	};
212
213	pinctrl_uart1: uart1grp {
214		fsl,pins = <
215			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
216			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
217		>;
218	};
219
220	pinctrl_uart3: uart3grp {
221		fsl,pins = <
222			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
223			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
224		>;
225	};
226
227	pinctrl_usbotg1: usbotg1grp {
228		fsl,pins = <
229			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
230			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
231		>;
232	};
233};
234