1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2019 BayLibre SAS. All rights reserved. 4 */ 5 6/dts-v1/; 7 8#include "meson-g12a.dtsi" 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/input/input.h> 11#include <dt-bindings/gpio/meson-g12a-gpio.h> 12#include <dt-bindings/sound/meson-g12a-tohdmitx.h> 13 14/ { 15 compatible = "seirobotics,sei510", "amlogic,g12a"; 16 model = "SEI Robotics SEI510"; 17 18 keys { 19 compatible = "adc-keys"; 20 io-channels = <&saradc 0>; 21 io-channel-names = "buttons"; 22 keyup-threshold-microvolt = <1800000>; 23 24 button-onoff { 25 label = "On/Off"; 26 linux,code = <KEY_POWER>; 27 press-threshold-microvolt = <1700000>; 28 }; 29 }; 30 31 aliases { 32 serial0 = &uart_AO; 33 ethernet0 = ðmac; 34 }; 35 36 mono_dac: audio-codec-0 { 37 compatible = "maxim,max98357a"; 38 #sound-dai-cells = <0>; 39 sound-name-prefix = "U16"; 40 sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; 41 }; 42 43 dmics: audio-codec-1 { 44 #sound-dai-cells = <0>; 45 compatible = "dmic-codec"; 46 num-channels = <2>; 47 wakeup-delay-ms = <50>; 48 sound-name-prefix = "MIC"; 49 }; 50 51 chosen { 52 stdout-path = "serial0:115200n8"; 53 }; 54 55 cvbs-connector { 56 compatible = "composite-video-connector"; 57 58 port { 59 cvbs_connector_in: endpoint { 60 remote-endpoint = <&cvbs_vdac_out>; 61 }; 62 }; 63 }; 64 65 emmc_pwrseq: emmc-pwrseq { 66 compatible = "mmc-pwrseq-emmc"; 67 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; 68 }; 69 70 hdmi-connector { 71 compatible = "hdmi-connector"; 72 type = "a"; 73 74 port { 75 hdmi_connector_in: endpoint { 76 remote-endpoint = <&hdmi_tx_tmds_out>; 77 }; 78 }; 79 }; 80 81 memory@0 { 82 device_type = "memory"; 83 reg = <0x0 0x0 0x0 0x40000000>; 84 }; 85 86 ao_5v: regulator-ao-5v { 87 compatible = "regulator-fixed"; 88 regulator-name = "AO_5V"; 89 regulator-min-microvolt = <5000000>; 90 regulator-max-microvolt = <5000000>; 91 vin-supply = <&dc_in>; 92 regulator-always-on; 93 }; 94 95 dc_in: regulator-dc-in { 96 compatible = "regulator-fixed"; 97 regulator-name = "DC_IN"; 98 regulator-min-microvolt = <5000000>; 99 regulator-max-microvolt = <5000000>; 100 regulator-always-on; 101 }; 102 103 emmc_1v8: regulator-emmc-1v8 { 104 compatible = "regulator-fixed"; 105 regulator-name = "EMMC_1V8"; 106 regulator-min-microvolt = <1800000>; 107 regulator-max-microvolt = <1800000>; 108 vin-supply = <&vddao_3v3>; 109 regulator-always-on; 110 }; 111 112 vddao_3v3: regulator-vddao-3v3 { 113 compatible = "regulator-fixed"; 114 regulator-name = "VDDAO_3V3"; 115 regulator-min-microvolt = <3300000>; 116 regulator-max-microvolt = <3300000>; 117 vin-supply = <&dc_in>; 118 regulator-always-on; 119 }; 120 121 vddao_3v3_t: regulator-vddao-3v3-t { 122 compatible = "regulator-fixed"; 123 regulator-name = "VDDAO_3V3_T"; 124 regulator-min-microvolt = <3300000>; 125 regulator-max-microvolt = <3300000>; 126 vin-supply = <&vddao_3v3>; 127 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; 128 enable-active-high; 129 }; 130 131 vddcpu: regulator-vddcpu { 132 /* 133 * SY8120B1ABC DC/DC Regulator. 134 */ 135 compatible = "pwm-regulator"; 136 137 regulator-name = "VDDCPU"; 138 regulator-min-microvolt = <721000>; 139 regulator-max-microvolt = <1022000>; 140 141 pwm-supply = <&dc_in>; 142 143 pwms = <&pwm_AO_cd 1 1250 0>; 144 pwm-dutycycle-range = <100 0>; 145 146 regulator-boot-on; 147 regulator-always-on; 148 }; 149 150 vddio_ao1v8: regulator-vddio-ao1v8 { 151 compatible = "regulator-fixed"; 152 regulator-name = "VDDIO_AO1V8"; 153 regulator-min-microvolt = <1800000>; 154 regulator-max-microvolt = <1800000>; 155 vin-supply = <&vddao_3v3>; 156 regulator-always-on; 157 }; 158 159 sdio_pwrseq: sdio-pwrseq { 160 compatible = "mmc-pwrseq-simple"; 161 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; 162 clocks = <&wifi32k>; 163 clock-names = "ext_clock"; 164 }; 165 166 wifi32k: wifi32k { 167 compatible = "pwm-clock"; 168 #clock-cells = <0>; 169 clock-frequency = <32768>; 170 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ 171 }; 172 173 sound { 174 compatible = "amlogic,axg-sound-card"; 175 model = "SEI510"; 176 audio-aux-devs = <&tdmout_a>, <&tdmout_b>, 177 <&tdmin_a>, <&tdmin_b>; 178 audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", 179 "TDMOUT_A IN 1", "FRDDR_B OUT 0", 180 "TDMOUT_A IN 2", "FRDDR_C OUT 0", 181 "TDM_A Playback", "TDMOUT_A OUT", 182 "TDMOUT_B IN 0", "FRDDR_A OUT 1", 183 "TDMOUT_B IN 1", "FRDDR_B OUT 1", 184 "TDMOUT_B IN 2", "FRDDR_C OUT 1", 185 "TDM_B Playback", "TDMOUT_B OUT", 186 "TODDR_A IN 4", "PDM Capture", 187 "TODDR_B IN 4", "PDM Capture", 188 "TODDR_C IN 4", "PDM Capture", 189 "TDMIN_A IN 0", "TDM_A Capture", 190 "TDMIN_A IN 3", "TDM_A Loopback", 191 "TDMIN_B IN 0", "TDM_A Capture", 192 "TDMIN_B IN 3", "TDM_A Loopback", 193 "TDMIN_A IN 1", "TDM_B Capture", 194 "TDMIN_A IN 4", "TDM_B Loopback", 195 "TDMIN_B IN 1", "TDM_B Capture", 196 "TDMIN_B IN 4", "TDM_B Loopback", 197 "TODDR_A IN 0", "TDMIN_A OUT", 198 "TODDR_B IN 0", "TDMIN_A OUT", 199 "TODDR_C IN 0", "TDMIN_A OUT", 200 "TODDR_A IN 1", "TDMIN_B OUT", 201 "TODDR_B IN 1", "TDMIN_B OUT", 202 "TODDR_C IN 1", "TDMIN_B OUT"; 203 204 clocks = <&clkc CLKID_MPLL2>, 205 <&clkc CLKID_MPLL0>, 206 <&clkc CLKID_MPLL1>; 207 208 assigned-clocks = <&clkc CLKID_MPLL2>, 209 <&clkc CLKID_MPLL0>, 210 <&clkc CLKID_MPLL1>; 211 assigned-clock-parents = <0>, <0>, <0>; 212 assigned-clock-rates = <294912000>, 213 <270950400>, 214 <393216000>; 215 216 dai-link-0 { 217 sound-dai = <&frddr_a>; 218 }; 219 220 dai-link-1 { 221 sound-dai = <&frddr_b>; 222 }; 223 224 dai-link-2 { 225 sound-dai = <&frddr_c>; 226 }; 227 228 dai-link-3 { 229 sound-dai = <&toddr_a>; 230 }; 231 232 dai-link-4 { 233 sound-dai = <&toddr_b>; 234 }; 235 236 dai-link-5 { 237 sound-dai = <&toddr_c>; 238 }; 239 240 /* internal speaker interface */ 241 dai-link-6 { 242 sound-dai = <&tdmif_a>; 243 dai-format = "i2s"; 244 dai-tdm-slot-tx-mask-0 = <1 1>; 245 mclk-fs = <256>; 246 247 codec-0 { 248 sound-dai = <&mono_dac>; 249 }; 250 251 codec-1 { 252 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; 253 }; 254 }; 255 256 /* 8ch hdmi interface */ 257 dai-link-7 { 258 sound-dai = <&tdmif_b>; 259 dai-format = "i2s"; 260 dai-tdm-slot-tx-mask-0 = <1 1>; 261 dai-tdm-slot-tx-mask-1 = <1 1>; 262 dai-tdm-slot-tx-mask-2 = <1 1>; 263 dai-tdm-slot-tx-mask-3 = <1 1>; 264 mclk-fs = <256>; 265 266 codec { 267 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; 268 }; 269 }; 270 271 /* internal digital mics */ 272 dai-link-8 { 273 sound-dai = <&pdm>; 274 275 codec { 276 sound-dai = <&dmics>; 277 }; 278 }; 279 280 /* hdmi glue */ 281 dai-link-9 { 282 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; 283 284 codec { 285 sound-dai = <&hdmi_tx>; 286 }; 287 }; 288 }; 289}; 290 291&arb { 292 status = "okay"; 293}; 294 295&cec_AO { 296 pinctrl-0 = <&cec_ao_a_h_pins>; 297 pinctrl-names = "default"; 298 status = "disabled"; 299 hdmi-phandle = <&hdmi_tx>; 300}; 301 302&cecb_AO { 303 pinctrl-0 = <&cec_ao_b_h_pins>; 304 pinctrl-names = "default"; 305 status = "okay"; 306 hdmi-phandle = <&hdmi_tx>; 307}; 308 309&clkc_audio { 310 status = "okay"; 311}; 312 313&cpu0 { 314 cpu-supply = <&vddcpu>; 315 operating-points-v2 = <&cpu_opp_table>; 316 clocks = <&clkc CLKID_CPU_CLK>; 317 clock-latency = <50000>; 318}; 319 320&cpu1 { 321 cpu-supply = <&vddcpu>; 322 operating-points-v2 = <&cpu_opp_table>; 323 clocks = <&clkc CLKID_CPU_CLK>; 324 clock-latency = <50000>; 325}; 326 327&cpu2 { 328 cpu-supply = <&vddcpu>; 329 operating-points-v2 = <&cpu_opp_table>; 330 clocks = <&clkc CLKID_CPU_CLK>; 331 clock-latency = <50000>; 332}; 333 334&cpu3 { 335 cpu-supply = <&vddcpu>; 336 operating-points-v2 = <&cpu_opp_table>; 337 clocks = <&clkc CLKID_CPU_CLK>; 338 clock-latency = <50000>; 339}; 340 341&cvbs_vdac_port { 342 cvbs_vdac_out: endpoint { 343 remote-endpoint = <&cvbs_connector_in>; 344 }; 345}; 346 347ðmac { 348 status = "okay"; 349 phy-handle = <&internal_ephy>; 350 phy-mode = "rmii"; 351}; 352 353&frddr_a { 354 status = "okay"; 355}; 356 357&frddr_b { 358 status = "okay"; 359}; 360 361&frddr_c { 362 status = "okay"; 363}; 364 365&hdmi_tx { 366 status = "okay"; 367 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; 368 pinctrl-names = "default"; 369}; 370 371&hdmi_tx_tmds_port { 372 hdmi_tx_tmds_out: endpoint { 373 remote-endpoint = <&hdmi_connector_in>; 374 }; 375}; 376 377&i2c3 { 378 status = "okay"; 379 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; 380 pinctrl-names = "default"; 381}; 382 383&ir { 384 status = "okay"; 385 pinctrl-0 = <&remote_input_ao_pins>; 386 pinctrl-names = "default"; 387}; 388 389&pwm_AO_cd { 390 pinctrl-0 = <&pwm_ao_d_e_pins>; 391 pinctrl-names = "default"; 392 clocks = <&xtal>; 393 clock-names = "clkin1"; 394 status = "okay"; 395}; 396 397&pwm_ef { 398 status = "okay"; 399 pinctrl-0 = <&pwm_e_pins>; 400 pinctrl-names = "default"; 401 clocks = <&xtal>; 402 clock-names = "clkin0"; 403}; 404 405&pdm { 406 pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, 407 <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, 408 <&pdm_dclk_z_pins>; 409 pinctrl-names = "default"; 410 status = "okay"; 411}; 412 413&saradc { 414 status = "okay"; 415 vref-supply = <&vddio_ao1v8>; 416}; 417 418/* SDIO */ 419&sd_emmc_a { 420 status = "okay"; 421 pinctrl-0 = <&sdio_pins>; 422 pinctrl-1 = <&sdio_clk_gate_pins>; 423 pinctrl-names = "default", "clk-gate"; 424 #address-cells = <1>; 425 #size-cells = <0>; 426 427 bus-width = <4>; 428 cap-sd-highspeed; 429 sd-uhs-sdr50; 430 max-frequency = <100000000>; 431 432 non-removable; 433 disable-wp; 434 435 /* WiFi firmware requires power to be kept while in suspend */ 436 keep-power-in-suspend; 437 438 mmc-pwrseq = <&sdio_pwrseq>; 439 440 vmmc-supply = <&vddao_3v3>; 441 vqmmc-supply = <&vddio_ao1v8>; 442 443 brcmf: wifi@1 { 444 reg = <1>; 445 compatible = "brcm,bcm4329-fmac"; 446 }; 447}; 448 449/* SD card */ 450&sd_emmc_b { 451 status = "okay"; 452 pinctrl-0 = <&sdcard_c_pins>; 453 pinctrl-1 = <&sdcard_clk_gate_c_pins>; 454 pinctrl-names = "default", "clk-gate"; 455 456 bus-width = <4>; 457 cap-sd-highspeed; 458 max-frequency = <50000000>; 459 disable-wp; 460 461 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; 462 vmmc-supply = <&vddao_3v3>; 463 vqmmc-supply = <&vddao_3v3>; 464}; 465 466/* eMMC */ 467&sd_emmc_c { 468 status = "okay"; 469 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; 470 pinctrl-1 = <&emmc_clk_gate_pins>; 471 pinctrl-names = "default", "clk-gate"; 472 473 bus-width = <8>; 474 cap-mmc-highspeed; 475 mmc-ddr-1_8v; 476 mmc-hs200-1_8v; 477 max-frequency = <200000000>; 478 non-removable; 479 disable-wp; 480 481 mmc-pwrseq = <&emmc_pwrseq>; 482 vmmc-supply = <&vddao_3v3>; 483 vqmmc-supply = <&emmc_1v8>; 484}; 485 486&tdmif_a { 487 pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; 488 pinctrl-names = "default"; 489 status = "okay"; 490 491 assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, 492 <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; 493 assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, 494 <&clkc_audio AUD_CLKID_MST_A_LRCLK>; 495 assigned-clock-rates = <0>, <0>; 496}; 497 498&tdmif_b { 499 status = "okay"; 500}; 501 502&tdmin_a { 503 status = "okay"; 504}; 505 506&tdmin_b { 507 status = "okay"; 508}; 509 510&tdmout_a { 511 status = "okay"; 512}; 513 514&tdmout_b { 515 status = "okay"; 516}; 517 518&toddr_a { 519 status = "okay"; 520}; 521 522&toddr_b { 523 status = "okay"; 524}; 525 526&toddr_c { 527 status = "okay"; 528}; 529 530&tohdmitx { 531 status = "okay"; 532}; 533 534&uart_A { 535 status = "okay"; 536 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; 537 pinctrl-names = "default"; 538 uart-has-rtscts; 539 540 bluetooth { 541 compatible = "brcm,bcm43438-bt"; 542 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; 543 max-speed = <2000000>; 544 clocks = <&wifi32k>; 545 clock-names = "lpo"; 546 vbat-supply = <&vddao_3v3>; 547 vddio-supply = <&vddio_ao1v8>; 548 }; 549}; 550 551&uart_AO { 552 status = "okay"; 553 pinctrl-0 = <&uart_ao_a_pins>; 554 pinctrl-names = "default"; 555}; 556 557&usb { 558 status = "okay"; 559 dr_mode = "host"; 560}; 561