1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974pro.dtsi"
3#include "pm8841.dtsi"
4#include "pm8941.dtsi"
5#include <dt-bindings/input/input.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10	aliases {
11		mmc0 = &sdhc_1;
12		mmc1 = &sdhc_2;
13		serial0 = &blsp1_uart2;
14		serial1 = &blsp2_uart1;
15	};
16
17	chosen {
18		stdout-path = "serial0:115200n8";
19	};
20
21	gpio-keys {
22		compatible = "gpio-keys";
23
24		pinctrl-0 = <&gpio_keys_pin_a>;
25		pinctrl-names = "default";
26
27		key-volume-down {
28			label = "volume_down";
29			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
30			linux,code = <KEY_VOLUMEDOWN>;
31			debounce-interval = <15>;
32		};
33
34		key-volume-up {
35			label = "volume_up";
36			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
37			linux,code = <KEY_VOLUMEUP>;
38			debounce-interval = <15>;
39		};
40	};
41
42	vreg_vsp: lcd-dcdc-regulator {
43		compatible = "regulator-fixed";
44		regulator-name = "vreg_vsp";
45		regulator-min-microvolt = <5600000>;
46		regulator-max-microvolt = <5600000>;
47
48		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
49		enable-active-high;
50
51		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
52		pinctrl-names = "default";
53	};
54
55	vreg_boost: vreg-boost {
56		compatible = "regulator-fixed";
57
58		regulator-name = "vreg-boost";
59		regulator-min-microvolt = <3150000>;
60		regulator-max-microvolt = <3150000>;
61
62		regulator-always-on;
63		regulator-boot-on;
64
65		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
66		enable-active-high;
67
68		pinctrl-names = "default";
69		pinctrl-0 = <&boost_bypass_n_pin>;
70	};
71
72	vreg_vph_pwr: vreg-vph-pwr {
73		compatible = "regulator-fixed";
74		regulator-name = "vph-pwr";
75
76		regulator-min-microvolt = <3600000>;
77		regulator-max-microvolt = <3600000>;
78
79		regulator-always-on;
80	};
81
82	vreg_wlan: wlan-regulator {
83		compatible = "regulator-fixed";
84
85		regulator-name = "wl-reg";
86		regulator-min-microvolt = <3300000>;
87		regulator-max-microvolt = <3300000>;
88
89		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
90		enable-active-high;
91
92		pinctrl-0 = <&wlan_regulator_pin>;
93		pinctrl-names = "default";
94	};
95};
96
97&blsp1_uart2 {
98	status = "okay";
99};
100
101&blsp2_i2c2 {
102	clock-frequency = <355000>;
103
104	status = "okay";
105
106	synaptics_touchscreen: synaptics@2c {
107		compatible = "syna,rmi4-i2c";
108		reg = <0x2c>;
109
110		interrupt-parent = <&tlmm>;
111		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
112
113		#address-cells = <1>;
114		#size-cells = <0>;
115
116		vdd-supply = <&pm8941_l22>;
117		/* vio-supply is set in dts */
118
119		pinctrl-0 = <&ts_int_pin>;
120		pinctrl-names = "default";
121
122		syna,startup-delay-ms = <100>;
123
124		rmi4-f01@1 {
125			reg = <0x1>;
126			syna,nosleep-mode = <1>;
127		};
128
129		rmi4-f11@11 {
130			reg = <0x11>;
131			syna,sensor-type = <1>;
132			touchscreen-inverted-x;
133		};
134	};
135};
136
137&pm8941_coincell {
138	qcom,rset-ohms = <2100>;
139	qcom,vset-millivolts = <3000>;
140
141	status = "okay";
142};
143
144&pm8941_gpios {
145	gpio_keys_pin_a: gpio-keys-active-state {
146		pins = "gpio2", "gpio5";
147		function = "normal";
148		bias-pull-up;
149		power-source = <PM8941_GPIO_S3>;
150	};
151
152	wlan_sleep_clk_pin: wl-sleep-clk-state {
153		pins = "gpio17";
154		function = "func2";
155		output-high;
156		power-source = <PM8941_GPIO_S3>;
157	};
158
159	wlan_regulator_pin: wl-reg-active-state {
160		pins = "gpio18";
161		function = "normal";
162		bias-disable;
163		power-source = <PM8941_GPIO_S3>;
164	};
165
166	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
167		pins = "gpio20";
168		function = "normal";
169		bias-disable;
170		power-source = <PM8941_GPIO_S3>;
171		input-disable;
172		output-low;
173	};
174};
175
176&pm8941_lpg {
177	qcom,power-source = <1>;
178
179	status = "okay";
180
181	multi-led {
182		color = <LED_COLOR_ID_RGB>;
183		function = LED_FUNCTION_STATUS;
184
185		#address-cells = <1>;
186		#size-cells = <0>;
187
188		led@5 {
189			reg = <5>;
190			color = <LED_COLOR_ID_BLUE>;
191		};
192
193		led@6 {
194			reg = <6>;
195			color = <LED_COLOR_ID_GREEN>;
196		};
197
198		led@7 {
199			reg = <7>;
200			color = <LED_COLOR_ID_RED>;
201		};
202	};
203};
204
205&pm8941_vib {
206	status = "okay";
207};
208
209&remoteproc_adsp {
210	cx-supply = <&pm8841_s2>;
211	status = "okay";
212};
213
214&remoteproc_mss {
215	cx-supply = <&pm8841_s2>;
216	mss-supply = <&pm8841_s3>;
217	mx-supply = <&pm8841_s1>;
218	pll-supply = <&pm8941_l12>;
219	status = "okay";
220};
221
222&rpm_requests {
223	regulators-0 {
224		compatible = "qcom,rpm-pm8841-regulators";
225
226		pm8841_s1: s1 {
227			regulator-min-microvolt = <675000>;
228			regulator-max-microvolt = <1050000>;
229		};
230
231		pm8841_s2: s2 {
232			regulator-min-microvolt = <500000>;
233			regulator-max-microvolt = <1050000>;
234		};
235
236		pm8841_s3: s3 {
237			regulator-min-microvolt = <500000>;
238			regulator-max-microvolt = <1050000>;
239		};
240
241		pm8841_s4: s4 {
242			regulator-min-microvolt = <500000>;
243			regulator-max-microvolt = <1050000>;
244		};
245	};
246
247	regulators-1 {
248		compatible = "qcom,rpm-pm8941-regulators";
249
250		vdd_l1_l3-supply = <&pm8941_s1>;
251		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
252		vdd_l4_l11-supply = <&pm8941_s1>;
253		vdd_l5_l7-supply = <&pm8941_s2>;
254		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
255		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
256		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
257		vdd_l21-supply = <&vreg_boost>;
258
259		pm8941_s1: s1 {
260			regulator-min-microvolt = <1300000>;
261			regulator-max-microvolt = <1300000>;
262			regulator-always-on;
263			regulator-boot-on;
264		};
265
266		pm8941_s2: s2 {
267			regulator-min-microvolt = <2150000>;
268			regulator-max-microvolt = <2150000>;
269			regulator-boot-on;
270		};
271
272		pm8941_s3: s3 {
273			regulator-min-microvolt = <1800000>;
274			regulator-max-microvolt = <1800000>;
275			regulator-system-load = <154000>;
276			regulator-always-on;
277			regulator-boot-on;
278		};
279
280		pm8941_s4: s4 {
281			regulator-min-microvolt = <5000000>;
282			regulator-max-microvolt = <5000000>;
283		};
284
285		pm8941_l1: l1 {
286			regulator-min-microvolt = <1225000>;
287			regulator-max-microvolt = <1225000>;
288			regulator-always-on;
289			regulator-boot-on;
290		};
291
292		pm8941_l2: l2 {
293			regulator-min-microvolt = <1200000>;
294			regulator-max-microvolt = <1200000>;
295		};
296
297		pm8941_l3: l3 {
298			regulator-min-microvolt = <1200000>;
299			regulator-max-microvolt = <1200000>;
300		};
301
302		pm8941_l4: l4 {
303			regulator-min-microvolt = <1225000>;
304			regulator-max-microvolt = <1225000>;
305		};
306
307		pm8941_l5: l5 {
308			regulator-min-microvolt = <1800000>;
309			regulator-max-microvolt = <1800000>;
310		};
311
312		pm8941_l6: l6 {
313			regulator-min-microvolt = <1800000>;
314			regulator-max-microvolt = <1800000>;
315			regulator-boot-on;
316		};
317
318		pm8941_l7: l7 {
319			regulator-min-microvolt = <1800000>;
320			regulator-max-microvolt = <1800000>;
321			regulator-boot-on;
322		};
323
324		pm8941_l8: l8 {
325			regulator-min-microvolt = <1800000>;
326			regulator-max-microvolt = <1800000>;
327		};
328
329		pm8941_l9: l9 {
330			regulator-min-microvolt = <1800000>;
331			regulator-max-microvolt = <2950000>;
332		};
333
334		pm8941_l12: l12 {
335			regulator-min-microvolt = <1800000>;
336			regulator-max-microvolt = <1800000>;
337			regulator-always-on;
338			regulator-boot-on;
339		};
340
341		pm8941_l13: l13 {
342			regulator-min-microvolt = <1800000>;
343			regulator-max-microvolt = <2950000>;
344			regulator-boot-on;
345		};
346
347		pm8941_l14: l14 {
348			regulator-min-microvolt = <1800000>;
349			regulator-max-microvolt = <1800000>;
350		};
351
352		pm8941_l15: l15 {
353			regulator-min-microvolt = <2050000>;
354			regulator-max-microvolt = <2050000>;
355		};
356
357		pm8941_l16: l16 {
358			regulator-min-microvolt = <2700000>;
359			regulator-max-microvolt = <2700000>;
360		};
361
362		pm8941_l17: l17 {
363			regulator-min-microvolt = <2700000>;
364			regulator-max-microvolt = <2700000>;
365		};
366
367		pm8941_l18: l18 {
368			regulator-min-microvolt = <2850000>;
369			regulator-max-microvolt = <2850000>;
370		};
371
372		pm8941_l20: l20 {
373			regulator-min-microvolt = <2950000>;
374			regulator-max-microvolt = <2950000>;
375			regulator-system-load = <500000>;
376			regulator-allow-set-load;
377			regulator-boot-on;
378		};
379
380		pm8941_l21: l21 {
381			regulator-min-microvolt = <2950000>;
382			regulator-max-microvolt = <2950000>;
383			regulator-system-load = <500000>;
384			regulator-allow-set-load;
385			regulator-boot-on;
386		};
387
388		pm8941_l22: l22 {
389			regulator-min-microvolt = <3000000>;
390			regulator-max-microvolt = <3000000>;
391		};
392
393		pm8941_l23: l23 {
394			regulator-min-microvolt = <2800000>;
395			regulator-max-microvolt = <2800000>;
396		};
397
398		pm8941_l24: l24 {
399			regulator-min-microvolt = <3075000>;
400			regulator-max-microvolt = <3075000>;
401			regulator-boot-on;
402		};
403
404		pm8941_lvs3: lvs3 {};
405	};
406};
407
408&sdhc_1 {
409	vmmc-supply = <&pm8941_l20>;
410	vqmmc-supply = <&pm8941_s3>;
411
412	pinctrl-0 = <&sdc1_on>;
413	pinctrl-1 = <&sdc1_off>;
414	pinctrl-names = "default", "sleep";
415
416	status = "okay";
417};
418
419&sdhc_2 {
420	vmmc-supply = <&pm8941_l21>;
421	vqmmc-supply = <&pm8941_l13>;
422
423	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
424
425	pinctrl-0 = <&sdc2_on>;
426	pinctrl-1 = <&sdc2_off>;
427	pinctrl-names = "default", "sleep";
428
429	status = "okay";
430};
431
432&sdhc_3 {
433	max-frequency = <100000000>;
434	vmmc-supply = <&vreg_wlan>;
435	non-removable;
436
437	pinctrl-0 = <&sdc3_on>;
438	pinctrl-names = "default";
439
440	status = "okay";
441
442	wifi@1 {
443		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
444		reg = <1>;
445
446		brcm,drive-strength = <10>;
447
448		pinctrl-0 = <&wlan_sleep_clk_pin>;
449		pinctrl-names = "default";
450	};
451};
452
453&tlmm {
454	sdc1_on: sdc1-on-state {
455		clk-pins {
456			pins = "sdc1_clk";
457			drive-strength = <16>;
458			bias-disable;
459		};
460
461		cmd-data-pins {
462			pins = "sdc1_cmd", "sdc1_data";
463			drive-strength = <10>;
464			bias-pull-up;
465		};
466	};
467
468	sdc2_on: sdc2-on-state {
469		clk-pins {
470			pins = "sdc2_clk";
471			drive-strength = <6>;
472			bias-disable;
473		};
474
475		cmd-data-pins {
476			pins = "sdc2_cmd", "sdc2_data";
477			drive-strength = <6>;
478			bias-pull-up;
479		};
480
481		cd-pins {
482			pins = "gpio62";
483			function = "gpio";
484			drive-strength = <2>;
485			bias-disable;
486		};
487	};
488
489	sdc3_on: sdc3-on-state {
490		clk-pins {
491			pins = "gpio40";
492			function = "sdc3";
493			drive-strength = <10>;
494			bias-disable;
495		};
496
497		cmd-pins {
498			pins = "gpio39";
499			function = "sdc3";
500			drive-strength = <10>;
501			bias-pull-up;
502		};
503
504		data-pins {
505			pins = "gpio35", "gpio36", "gpio37", "gpio38";
506			function = "sdc3";
507			drive-strength = <10>;
508			bias-pull-up;
509		};
510	};
511
512	ts_int_pin: ts-int-pin-state {
513		pins = "gpio86";
514		function = "gpio";
515		drive-strength = <2>;
516		bias-disable;
517	};
518};
519
520&usb {
521	phys = <&usb_hs1_phy>;
522	phy-select = <&tcsr 0xb000 0>;
523	extcon = <&smbb>, <&usb_id>;
524	vbus-supply = <&chg_otg>;
525
526	hnp-disable;
527	srp-disable;
528	adp-disable;
529
530	status = "okay";
531};
532
533&usb_hs1_phy {
534	v1p8-supply = <&pm8941_l6>;
535	v3p3-supply = <&pm8941_l24>;
536
537	extcon = <&smbb>;
538	qcom,init-seq = /bits/ 8 <0x1 0x64>;
539
540	status = "okay";
541};
542