1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Support for Variscite DART-MX6 Module
4 *
5 * Copyright 2017 BayLibre, SAS
6 * Author: Neil Armstrong <narmstrong@baylibre.com>
7 */
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/sound/fsl-imx-audmux.h>
11
12/ {
13	memory@10000000 {
14		device_type = "memory";
15		reg = <0x10000000 0x40000000>;
16	};
17
18	reg_3p3v: regulator-3p3v {
19		compatible = "regulator-fixed";
20		regulator-name = "3P3V";
21		regulator-min-microvolt = <3300000>;
22		regulator-max-microvolt = <3300000>;
23		regulator-always-on;
24	};
25
26	reg_wl18xx_vmmc: regulator-wl18xx {
27		compatible = "regulator-fixed";
28		regulator-name = "vwl1807";
29		regulator-min-microvolt = <1800000>;
30		regulator-max-microvolt = <1800000>;
31		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
32		enable-active-high;
33		startup-delay-us = <70000>;
34	};
35};
36
37&audmux {
38	pinctrl-names = "default";
39	pinctrl-0 = <&pinctrl_audmux>;
40	status = "okay";
41
42	mux-ssi2 {
43		fsl,audmux-port = <1>;
44		fsl,port-config = <
45			(IMX_AUDMUX_V2_PTCR_SYN |
46			IMX_AUDMUX_V2_PTCR_TFSDIR |
47			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
48			IMX_AUDMUX_V2_PTCR_TCLKDIR |
49			IMX_AUDMUX_V2_PTCR_TCSEL(2))
50			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
51		>;
52	};
53
54	mux-aud3 {
55		fsl,audmux-port = <2>;
56		fsl,port-config = <
57			IMX_AUDMUX_V2_PTCR_SYN
58			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
59		>;
60	};
61};
62
63&can1 {
64	pinctrl-names = "default";
65	pinctrl-0 = <&pinctrl_flexcan1>;
66	status = "disabled";
67};
68
69&can2 {
70	pinctrl-names = "default";
71	pinctrl-0 = <&pinctrl_flexcan2>;
72	status = "disabled";
73};
74
75&ecspi1 {
76	pinctrl-names = "default";
77	pinctrl-0 = <&pinctrl_ecspi1>;
78	status = "disabled";
79};
80
81&fec {
82	pinctrl-names = "default";
83	pinctrl-0 = <&pinctrl_enet>;
84	phy-mode = "rgmii";
85	status = "disabled";
86};
87
88&hdmi {
89	pinctrl-names = "default";
90	pinctrl-0 = <&pinctrl_hdmicec>;
91	ddc-i2c-bus = <&i2c1>;
92	status = "disabled";
93};
94
95&i2c1 {
96	pinctrl-names = "default";
97	pinctrl-0 = <&pinctrl_i2c1>;
98	status = "disabled";
99};
100
101&i2c2 {
102	clock-frequency = <100000>;
103	pinctrl-names = "default";
104	pinctrl-0 = <&pinctrl_i2c2>;
105	status = "okay";
106
107	pmic@8 {
108		pinctrl-names = "default";
109		pinctrl-0 = <&pinctrl_pmic>;
110		compatible = "fsl,pfuze100";
111		reg = <0x08>;
112
113		regulators {
114			sw1a_reg: sw1ab {
115				regulator-min-microvolt = <300000>;
116				regulator-max-microvolt = <1875000>;
117				regulator-boot-on;
118				regulator-always-on;
119				regulator-ramp-delay = <6250>;
120			};
121
122			sw1c_reg: sw1c {
123				regulator-min-microvolt = <300000>;
124				regulator-max-microvolt = <1875000>;
125				regulator-boot-on;
126				regulator-always-on;
127				regulator-ramp-delay = <6250>;
128			};
129
130			sw2_reg: sw2 {
131				regulator-min-microvolt = <800000>;
132				regulator-max-microvolt = <3300000>;
133				regulator-boot-on;
134				regulator-always-on;
135			};
136
137			sw3a_reg: sw3a {
138				regulator-min-microvolt = <800000>;
139				regulator-max-microvolt = <3950000>;
140				regulator-boot-on;
141				regulator-always-on;
142			};
143
144			sw3b_reg: sw3b {
145				regulator-min-microvolt = <800000>;
146				regulator-max-microvolt = <3950000>;
147				regulator-boot-on;
148				regulator-always-on;
149			};
150
151			sw4_reg: sw4 {
152				regulator-min-microvolt = <800000>;
153				regulator-max-microvolt = <3950000>;
154			};
155
156			snvs_reg: vsnvs {
157				regulator-min-microvolt = <1200000>;
158				regulator-max-microvolt = <3000000>;
159				regulator-boot-on;
160				regulator-always-on;
161			};
162
163			vref_reg: vrefddr {
164				regulator-boot-on;
165				regulator-always-on;
166			};
167
168			vgen6_reg: vgen6 {
169				regulator-min-microvolt = <2800000>;
170				regulator-max-microvolt = <2800000>;
171				regulator-always-on;
172				regulator-boot-on;
173			};
174		};
175	};
176
177	tlv320aic3106: codec@1b {
178		compatible = "ti,tlv320aic3106";
179		reg = <0x1b>;
180		#sound-dai-cells = <0>;
181		DRVDD-supply = <&reg_3p3v>;
182		AVDD-supply = <&reg_3p3v>;
183		IOVDD-supply = <&reg_3p3v>;
184		DVDD-supply = <&reg_3p3v>;
185		ai3x-ocmv = <0>;
186		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
187	};
188};
189
190&i2c3 {
191	pinctrl-names = "default";
192	pinctrl-0 = <&pinctrl_i2c3>;
193	status = "disabled";
194};
195
196&iomuxc {
197	pinctrl_audmux: audmux {
198		fsl,pins = <
199			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
200			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
201			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
202			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
203			/* Audio Clock */
204			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
205		>;
206	};
207
208	pinctrl_bt: bt {
209		fsl,pins = <
210			/* Bluetooth enable */
211			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
212			/* Bluetooth Slow Clock */
213			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
214		>;
215	};
216
217	pinctrl_ecspi1: ecspi1grp {
218		fsl,pins = <
219			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
220			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
221			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
222			/* SPI1 CS0 */
223			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
224			/* SPI1 CS1 */
225			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
226		>;
227	};
228
229	pinctrl_enet: enetgrp {
230		fsl,pins = <
231			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
232			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
233			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
234			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
235			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
236			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
237			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
238			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
239			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
240			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
241			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
242			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
243			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
244			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
245			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
246		>;
247	};
248
249	pinctrl_flexcan1: flexcan1grp {
250		fsl,pins = <
251			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX	0x1b0b0
252			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX	0x1b0b0
253		>;
254	};
255
256	pinctrl_flexcan2: flexcan2grp {
257		fsl,pins = <
258			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
259			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
260		>;
261	};
262
263	pinctrl_hdmicec: hdmicecgrp {
264		fsl,pins = <
265			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
266		>;
267	};
268
269	pinctrl_i2c1: i2c1grp {
270		fsl,pins = <
271			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
272			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
273		>;
274	};
275
276	pinctrl_i2c2: i2c2grp {
277		fsl,pins = <
278			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
279			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
280		>;
281	};
282
283	pinctrl_i2c3: i2c3grp {
284		fsl,pins = <
285			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
286			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
287		>;
288	};
289
290	pinctrl_pmic: pmicgrp {
291		fsl,pins = <
292			/* PMIC INT */
293			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b1
294		>;
295	};
296
297	pinctrl_pwm2: pwm2grp {
298		fsl,pins = <
299			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
300		>;
301	};
302
303	pinctrl_uart1: uart1grp {
304		fsl,pins = <
305			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
306			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
307		>;
308	};
309
310	pinctrl_uart2: uart2grp {
311		fsl,pins = <
312			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
313			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
314			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
315			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
316		>;
317	};
318
319	pinctrl_uart3: uart3grp {
320		fsl,pins = <
321			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
322			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
323			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
324			MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
325		>;
326	};
327
328	pinctrl_usbotg: usbotggrp {
329		fsl,pins = <
330			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
331		>;
332	};
333
334	pinctrl_usdhc1: usdhc1grp {
335		fsl,pins = <
336			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
337			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
338			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
339			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
340			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
341			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
342			/* WL_EN */
343			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
344			/* WL_IRQ */
345			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x17071
346		>;
347	};
348
349	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
350		fsl,pins = <
351			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
352			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
353			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
354			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
355			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
356			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
357		>;
358	};
359
360	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
361		fsl,pins = <
362			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
363			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
364			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170F9
365			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170F9
366			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170F9
367			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170F9
368		>;
369	};
370
371	pinctrl_usdhc2: usdhc2grp {
372		fsl,pins = <
373			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
374			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
375			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
376			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
377			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
378			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
379		>;
380	};
381
382	pinctrl_usdhc3: usdhc3grp {
383		fsl,pins = <
384			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
385			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
386			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
387			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
388			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
389			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
390		>;
391	};
392};
393
394&pcie {
395	fsl,tx-swing-full = <103>;
396	fsl,tx-swing-low = <103>;
397	reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
398	status = "disabled";
399};
400
401&pwm2 {
402	pinctrl-names = "default";
403	pinctrl-0 = <&pinctrl_pwm2>;
404	status = "disabled";
405};
406
407&reg_arm {
408	vin-supply = <&sw1a_reg>;
409};
410
411&reg_pu {
412	vin-supply = <&sw1c_reg>;
413};
414
415&reg_soc {
416	vin-supply = <&sw1c_reg>;
417};
418
419&snvs_poweroff {
420	status = "okay";
421};
422
423&ssi2 {
424	status = "okay";
425};
426
427&uart1 {
428	pinctrl-names = "default";
429	pinctrl-0 = <&pinctrl_uart1>;
430	status = "disabled";
431};
432
433&uart2 {
434	pinctrl-names = "default";
435	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
436	uart-has-rtscts;
437	status = "okay";
438
439	bluetooth {
440		compatible = "ti,wl1835-st";
441		enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
442	};
443};
444
445&uart3 {
446	pinctrl-names = "default";
447	pinctrl-0 = <&pinctrl_uart3>;
448	uart-has-rtscts;
449	status = "disabled";
450};
451
452&usbh1 {
453	status = "disabled";
454};
455
456&usbotg {
457	vbus-supply = <&reg_usb_otg_vbus>;
458	pinctrl-names = "default";
459	pinctrl-0 = <&pinctrl_usbotg>;
460	disable-over-current;
461	status = "disabled";
462};
463
464&usdhc1 {
465	pinctrl-names = "default", "state_100mhz", "state_200mhz";
466	pinctrl-0 = <&pinctrl_usdhc1>;
467	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
468	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
469	bus-width = <4>;
470	vmmc-supply = <&reg_wl18xx_vmmc>;
471	non-removable;
472	wakeup-source;
473	keep-power-in-suspend;
474	cap-power-off-card;
475	#address-cells = <1>;
476	#size-cells = <0>;
477	status = "okay";
478
479	wlcore: wlcore@2 {
480		compatible = "ti,wl1835";
481		reg = <2>;
482		interrupt-parent = <&gpio6>;
483		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
484		ref-clock-frequency = <38400000>;
485	};
486};
487
488&usdhc2 {
489	pinctrl-names = "default";
490	pinctrl-0 = <&pinctrl_usdhc2>;
491	no-1-8-v;
492	keep-power-in-suspend;
493	wakeup-source;
494	status = "disabled";
495};
496
497&usdhc3 {
498	pinctrl-names = "default";
499	pinctrl-0 = <&pinctrl_usdhc3>;
500	non-removable;
501	keep-power-in-suspend;
502	wakeup-source;
503	status = "okay";
504};
505