1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2012 Freescale Semiconductor, Inc.
4// Copyright 2011 Linaro Ltd.
5
6#include <dt-bindings/clock/imx6qdl-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9
10/ {
11	chosen {
12		stdout-path = &uart1;
13	};
14
15	memory@10000000 {
16		device_type = "memory";
17		reg = <0x10000000 0x40000000>;
18	};
19
20	reg_usb_otg_vbus: regulator-usb-otg-vbus {
21		compatible = "regulator-fixed";
22		regulator-name = "usb_otg_vbus";
23		regulator-min-microvolt = <5000000>;
24		regulator-max-microvolt = <5000000>;
25		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
26		enable-active-high;
27		vin-supply = <&swbst_reg>;
28	};
29
30	reg_usb_h1_vbus: regulator-usb-h1-vbus {
31		compatible = "regulator-fixed";
32		regulator-name = "usb_h1_vbus";
33		regulator-min-microvolt = <5000000>;
34		regulator-max-microvolt = <5000000>;
35		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
36		enable-active-high;
37		vin-supply = <&swbst_reg>;
38	};
39
40	reg_audio: regulator-audio {
41		compatible = "regulator-fixed";
42		regulator-name = "wm8962-supply";
43		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
44		enable-active-high;
45	};
46
47	reg_pcie: regulator-pcie {
48		compatible = "regulator-fixed";
49		pinctrl-names = "default";
50		pinctrl-0 = <&pinctrl_pcie_reg>;
51		regulator-name = "MPCIE_3V3";
52		regulator-min-microvolt = <3300000>;
53		regulator-max-microvolt = <3300000>;
54		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
55		enable-active-high;
56	};
57
58	reg_sensors: regulator-sensors {
59		compatible = "regulator-fixed";
60		pinctrl-names = "default";
61		pinctrl-0 = <&pinctrl_sensors_reg>;
62		regulator-name = "sensors-supply";
63		regulator-min-microvolt = <3300000>;
64		regulator-max-microvolt = <3300000>;
65		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
66		enable-active-high;
67	};
68
69	gpio-keys {
70		compatible = "gpio-keys";
71		pinctrl-names = "default";
72		pinctrl-0 = <&pinctrl_gpio_keys>;
73
74		power {
75			label = "Power Button";
76			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
77			wakeup-source;
78			linux,code = <KEY_POWER>;
79		};
80
81		volume-up {
82			label = "Volume Up";
83			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
84			wakeup-source;
85			linux,code = <KEY_VOLUMEUP>;
86		};
87
88		volume-down {
89			label = "Volume Down";
90			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
91			wakeup-source;
92			linux,code = <KEY_VOLUMEDOWN>;
93		};
94	};
95
96	sound {
97		compatible = "fsl,imx6q-sabresd-wm8962",
98			   "fsl,imx-audio-wm8962";
99		model = "wm8962-audio";
100		pinctrl-names = "default";
101		pinctrl-0 = <&pinctrl_hp>;
102		ssi-controller = <&ssi2>;
103		audio-codec = <&codec>;
104		audio-asrc = <&asrc>;
105		audio-routing =
106			"Headphone Jack", "HPOUTL",
107			"Headphone Jack", "HPOUTR",
108			"Ext Spk", "SPKOUTL",
109			"Ext Spk", "SPKOUTR",
110			"AMIC", "MICBIAS",
111			"IN3R", "AMIC",
112			"DMIC", "MICBIAS",
113			"DMICDAT", "DMIC";
114		mux-int-port = <2>;
115		mux-ext-port = <3>;
116		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
117		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
118	};
119
120	backlight_lvds: backlight-lvds {
121		compatible = "pwm-backlight";
122		pwms = <&pwm1 0 5000000 0>;
123		brightness-levels = <0 4 8 16 32 64 128 255>;
124		default-brightness-level = <7>;
125		status = "okay";
126	};
127
128	leds {
129		compatible = "gpio-leds";
130		pinctrl-names = "default";
131		pinctrl-0 = <&pinctrl_gpio_leds>;
132
133		led-red {
134			gpios = <&gpio1 2 0>;
135			default-state = "on";
136		};
137	};
138
139	panel {
140		compatible = "hannstar,hsd100pxn1";
141		backlight = <&backlight_lvds>;
142
143		port {
144			panel_in: endpoint {
145				remote-endpoint = <&lvds0_out>;
146			};
147		};
148	};
149};
150
151&ipu1_csi0_from_ipu1_csi0_mux {
152	bus-width = <8>;
153	data-shift = <12>; /* Lines 19:12 used */
154	hsync-active = <1>;
155	vsync-active = <1>;
156};
157
158&ipu1_csi0_mux_from_parallel_sensor {
159	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
160};
161
162&ipu1_csi0 {
163	pinctrl-names = "default";
164	pinctrl-0 = <&pinctrl_ipu1_csi0>;
165};
166
167&mipi_csi {
168	status = "okay";
169
170	port@0 {
171		reg = <0>;
172
173		mipi_csi2_in: endpoint {
174			remote-endpoint = <&ov5640_to_mipi_csi2>;
175			clock-lanes = <0>;
176			data-lanes = <1 2>;
177		};
178	};
179};
180
181&audmux {
182	pinctrl-names = "default";
183	pinctrl-0 = <&pinctrl_audmux>;
184	status = "okay";
185};
186
187&clks {
188	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
189			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
190	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
191				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
192};
193
194&ecspi1 {
195	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
196	pinctrl-names = "default";
197	pinctrl-0 = <&pinctrl_ecspi1>;
198	status = "okay";
199
200	flash: flash@0 {
201		#address-cells = <1>;
202		#size-cells = <1>;
203		compatible = "st,m25p32", "jedec,spi-nor";
204		spi-max-frequency = <20000000>;
205		reg = <0>;
206	};
207};
208
209&fec {
210	pinctrl-names = "default";
211	pinctrl-0 = <&pinctrl_enet>;
212	phy-mode = "rgmii-id";
213	phy-handle = <&phy>;
214	fsl,magic-packet;
215	status = "okay";
216
217	mdio {
218		#address-cells = <1>;
219		#size-cells = <0>;
220
221		phy: ethernet-phy@1 {
222			reg = <1>;
223			qca,clk-out-frequency = <125000000>;
224			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
225			reset-assert-us = <10000>;
226		};
227	};
228};
229
230&hdmi {
231	pinctrl-names = "default";
232	pinctrl-0 = <&pinctrl_hdmi_cec>;
233	ddc-i2c-bus = <&i2c2>;
234	status = "okay";
235};
236
237&i2c1 {
238	clock-frequency = <100000>;
239	pinctrl-names = "default";
240	pinctrl-0 = <&pinctrl_i2c1>;
241	status = "okay";
242
243	codec: wm8962@1a {
244		compatible = "wlf,wm8962";
245		reg = <0x1a>;
246		clocks = <&clks IMX6QDL_CLK_CKO>;
247		DCVDD-supply = <&reg_audio>;
248		DBVDD-supply = <&reg_audio>;
249		AVDD-supply = <&reg_audio>;
250		CPVDD-supply = <&reg_audio>;
251		MICVDD-supply = <&reg_audio>;
252		PLLVDD-supply = <&reg_audio>;
253		SPKVDD1-supply = <&reg_audio>;
254		SPKVDD2-supply = <&reg_audio>;
255		gpio-cfg = <
256			0x0000 /* 0:Default */
257			0x0000 /* 1:Default */
258			0x0013 /* 2:FN_DMICCLK */
259			0x0000 /* 3:Default */
260			0x8014 /* 4:FN_DMICCDAT */
261			0x0000 /* 5:Default */
262		>;
263	};
264
265	accelerometer@1c {
266		compatible = "fsl,mma8451";
267		reg = <0x1c>;
268		pinctrl-names = "default";
269		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
270		interrupt-parent = <&gpio1>;
271		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
272		vdd-supply = <&reg_sensors>;
273		vddio-supply = <&reg_sensors>;
274	};
275
276	ov5642: camera@3c {
277		compatible = "ovti,ov5642";
278		pinctrl-names = "default";
279		pinctrl-0 = <&pinctrl_ov5642>;
280		clocks = <&clks IMX6QDL_CLK_CKO>;
281		clock-names = "xclk";
282		reg = <0x3c>;
283		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
284		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
285						rev B board is VGEN5 */
286		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
287		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
288		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
289		status = "disabled";
290
291		port {
292			ov5642_to_ipu1_csi0_mux: endpoint {
293				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
294				bus-width = <8>;
295				hsync-active = <1>;
296				vsync-active = <1>;
297			};
298		};
299	};
300};
301
302&i2c2 {
303	clock-frequency = <100000>;
304	pinctrl-names = "default";
305	pinctrl-0 = <&pinctrl_i2c2>;
306	status = "okay";
307
308	touchscreen@4 {
309		compatible = "eeti,egalax_ts";
310		reg = <0x04>;
311		pinctrl-names = "default";
312		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
313		interrupt-parent = <&gpio6>;
314		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
315		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
316	};
317
318	ov5640: camera@3c {
319		compatible = "ovti,ov5640";
320		pinctrl-names = "default";
321		pinctrl-0 = <&pinctrl_ov5640>;
322		reg = <0x3c>;
323		clocks = <&clks IMX6QDL_CLK_CKO>;
324		clock-names = "xclk";
325		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
326		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
327						rev B board is VGEN5 */
328		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
329		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
330		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
331
332		port {
333			ov5640_to_mipi_csi2: endpoint {
334				remote-endpoint = <&mipi_csi2_in>;
335				clock-lanes = <0>;
336				data-lanes = <1 2>;
337			};
338		};
339	};
340
341	pmic: pmic@8 {
342		compatible = "fsl,pfuze100";
343		reg = <0x08>;
344
345		regulators {
346			sw1a_reg: sw1ab {
347				regulator-min-microvolt = <300000>;
348				regulator-max-microvolt = <1875000>;
349				regulator-boot-on;
350				regulator-always-on;
351				regulator-ramp-delay = <6250>;
352			};
353
354			sw1c_reg: sw1c {
355				regulator-min-microvolt = <300000>;
356				regulator-max-microvolt = <1875000>;
357				regulator-boot-on;
358				regulator-always-on;
359				regulator-ramp-delay = <6250>;
360			};
361
362			sw2_reg: sw2 {
363				regulator-min-microvolt = <800000>;
364				regulator-max-microvolt = <3300000>;
365				regulator-boot-on;
366				regulator-always-on;
367				regulator-ramp-delay = <6250>;
368			};
369
370			sw3a_reg: sw3a {
371				regulator-min-microvolt = <400000>;
372				regulator-max-microvolt = <1975000>;
373				regulator-boot-on;
374				regulator-always-on;
375			};
376
377			sw3b_reg: sw3b {
378				regulator-min-microvolt = <400000>;
379				regulator-max-microvolt = <1975000>;
380				regulator-boot-on;
381				regulator-always-on;
382			};
383
384			sw4_reg: sw4 {
385				regulator-min-microvolt = <800000>;
386				regulator-max-microvolt = <3300000>;
387				regulator-always-on;
388			};
389
390			swbst_reg: swbst {
391				regulator-min-microvolt = <5000000>;
392				regulator-max-microvolt = <5150000>;
393			};
394
395			snvs_reg: vsnvs {
396				regulator-min-microvolt = <1000000>;
397				regulator-max-microvolt = <3000000>;
398				regulator-boot-on;
399				regulator-always-on;
400			};
401
402			vref_reg: vrefddr {
403				regulator-boot-on;
404				regulator-always-on;
405			};
406
407			vgen1_reg: vgen1 {
408				regulator-min-microvolt = <800000>;
409				regulator-max-microvolt = <1550000>;
410			};
411
412			vgen2_reg: vgen2 {
413				regulator-min-microvolt = <800000>;
414				regulator-max-microvolt = <1550000>;
415			};
416
417			vgen3_reg: vgen3 {
418				regulator-min-microvolt = <1800000>;
419				regulator-max-microvolt = <3300000>;
420			};
421
422			vgen4_reg: vgen4 {
423				regulator-min-microvolt = <1800000>;
424				regulator-max-microvolt = <3300000>;
425				regulator-always-on;
426			};
427
428			vgen5_reg: vgen5 {
429				regulator-min-microvolt = <1800000>;
430				regulator-max-microvolt = <3300000>;
431				regulator-always-on;
432			};
433
434			vgen6_reg: vgen6 {
435				regulator-min-microvolt = <1800000>;
436				regulator-max-microvolt = <3300000>;
437				regulator-always-on;
438			};
439		};
440	};
441};
442
443&i2c3 {
444	clock-frequency = <100000>;
445	pinctrl-names = "default";
446	pinctrl-0 = <&pinctrl_i2c3>;
447	status = "okay";
448
449	egalax_ts@4 {
450		compatible = "eeti,egalax_ts";
451		reg = <0x04>;
452		interrupt-parent = <&gpio6>;
453		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
454		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
455	};
456
457	magnetometer@e {
458		compatible = "fsl,mag3110";
459		reg = <0x0e>;
460		pinctrl-names = "default";
461		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
462		interrupt-parent = <&gpio3>;
463		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
464		vdd-supply = <&reg_sensors>;
465		vddio-supply = <&reg_sensors>;
466	};
467
468	light-sensor@44 {
469		compatible = "isil,isl29023";
470		reg = <0x44>;
471		pinctrl-names = "default";
472		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
473		interrupt-parent = <&gpio3>;
474		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
475		vcc-supply = <&reg_sensors>;
476	};
477};
478
479&iomuxc {
480	pinctrl-names = "default";
481	pinctrl-0 = <&pinctrl_hog>;
482
483	imx6qdl-sabresd {
484		pinctrl_hog: hoggrp {
485			fsl,pins = <
486				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
487				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
488				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
489				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
490				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
491				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
492				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
493				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
494				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
495			>;
496		};
497
498		pinctrl_audmux: audmuxgrp {
499			fsl,pins = <
500				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
501				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
502				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
503				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
504			>;
505		};
506
507		pinctrl_ecspi1: ecspi1grp {
508			fsl,pins = <
509				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
510				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
511				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
512				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
513			>;
514		};
515
516		pinctrl_enet: enetgrp {
517			fsl,pins = <
518				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
519				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
520				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
521				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
522				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
523				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
524				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
525				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
526				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
527				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
528				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
529				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
530				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
531				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
532				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
533				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
534			>;
535		};
536
537		pinctrl_gpio_keys: gpio_keysgrp {
538			fsl,pins = <
539				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
540				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
541				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
542			>;
543		};
544
545		pinctrl_hdmi_cec: hdmicecgrp {
546			fsl,pins = <
547				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
548			>;
549		};
550
551		pinctrl_hp: hpgrp {
552			fsl,pins = <
553				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
554				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
555			>;
556		};
557
558		pinctrl_i2c1: i2c1grp {
559			fsl,pins = <
560				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
561				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
562			>;
563		};
564
565		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
566			fsl,pins = <
567				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
568			>;
569		};
570
571		pinctrl_i2c2: i2c2grp {
572			fsl,pins = <
573				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
574				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
575			>;
576		};
577
578		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
579			fsl,pins = <
580				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
581			>;
582		};
583
584		pinctrl_i2c3: i2c3grp {
585			fsl,pins = <
586				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
587				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
588			>;
589		};
590
591		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
592			fsl,pins = <
593				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
594			>;
595		};
596
597		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
598			fsl,pins = <
599				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
600			>;
601		};
602
603		pinctrl_ipu1_csi0: ipu1csi0grp {
604			fsl,pins = <
605				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
606				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
607				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
608				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
609				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
610				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
611				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
612				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
613				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
614				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
615				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
616			>;
617		};
618
619		pinctrl_ov5640: ov5640grp {
620			fsl,pins = <
621				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
622				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
623			>;
624		};
625
626		pinctrl_ov5642: ov5642grp {
627			fsl,pins = <
628				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
629				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
630			>;
631		};
632
633		pinctrl_pcie: pciegrp {
634			fsl,pins = <
635				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
636			>;
637		};
638
639		pinctrl_pcie_reg: pciereggrp {
640			fsl,pins = <
641				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
642			>;
643		};
644
645		pinctrl_pwm1: pwm1grp {
646			fsl,pins = <
647				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
648			>;
649		};
650
651		pinctrl_sensors_reg: sensorsreggrp {
652			fsl,pins = <
653				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
654			>;
655		};
656
657		pinctrl_uart1: uart1grp {
658			fsl,pins = <
659				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
660				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
661			>;
662		};
663
664		pinctrl_usbotg: usbotggrp {
665			fsl,pins = <
666				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
667			>;
668		};
669
670		pinctrl_usdhc2: usdhc2grp {
671			fsl,pins = <
672				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
673				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
674				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
675				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
676				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
677				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
678				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
679				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
680				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
681				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
682			>;
683		};
684
685		pinctrl_usdhc3: usdhc3grp {
686			fsl,pins = <
687				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
688				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
689				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
690				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
691				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
692				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
693				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
694				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
695				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
696				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
697			>;
698		};
699
700		pinctrl_usdhc4: usdhc4grp {
701			fsl,pins = <
702				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
703				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
704				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
705				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
706				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
707				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
708				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
709				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
710				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
711				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
712			>;
713		};
714
715		pinctrl_wdog: wdoggrp {
716			fsl,pins = <
717				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
718			>;
719		};
720	};
721
722	gpio_leds {
723		pinctrl_gpio_leds: gpioledsgrp {
724			fsl,pins = <
725				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
726			>;
727		};
728	};
729};
730
731&ldb {
732	status = "okay";
733
734	lvds-channel@1 {
735		fsl,data-mapping = "spwg";
736		fsl,data-width = <18>;
737		status = "okay";
738
739		port@4 {
740			reg = <4>;
741
742			lvds0_out: endpoint {
743				remote-endpoint = <&panel_in>;
744			};
745		};
746	};
747};
748
749&pcie {
750	pinctrl-names = "default";
751	pinctrl-0 = <&pinctrl_pcie>;
752	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
753	vpcie-supply = <&reg_pcie>;
754	status = "okay";
755};
756
757&pwm1 {
758	pinctrl-names = "default";
759	pinctrl-0 = <&pinctrl_pwm1>;
760	status = "okay";
761};
762
763&reg_arm {
764       vin-supply = <&sw1a_reg>;
765};
766
767&reg_pu {
768       vin-supply = <&sw1c_reg>;
769};
770
771&reg_soc {
772       vin-supply = <&sw1c_reg>;
773};
774
775&reg_vdd1p1 {
776	vin-supply = <&vgen5_reg>;
777};
778
779&reg_vdd2p5 {
780	vin-supply = <&vgen5_reg>;
781};
782
783&snvs_poweroff {
784	status = "okay";
785};
786
787&snvs_pwrkey {
788	status = "okay";
789};
790
791&ssi2 {
792	status = "okay";
793};
794
795&uart1 {
796	pinctrl-names = "default";
797	pinctrl-0 = <&pinctrl_uart1>;
798	status = "okay";
799};
800
801&usbh1 {
802	vbus-supply = <&reg_usb_h1_vbus>;
803	status = "okay";
804};
805
806&usbotg {
807	vbus-supply = <&reg_usb_otg_vbus>;
808	pinctrl-names = "default";
809	pinctrl-0 = <&pinctrl_usbotg>;
810	disable-over-current;
811	status = "okay";
812};
813
814&usdhc2 {
815	pinctrl-names = "default";
816	pinctrl-0 = <&pinctrl_usdhc2>;
817	bus-width = <8>;
818	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
819	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
820	status = "okay";
821};
822
823&usdhc3 {
824	pinctrl-names = "default";
825	pinctrl-0 = <&pinctrl_usdhc3>;
826	bus-width = <8>;
827	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
828	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
829	status = "okay";
830};
831
832&usdhc4 {
833	pinctrl-names = "default";
834	pinctrl-0 = <&pinctrl_usdhc4>;
835	bus-width = <8>;
836	non-removable;
837	no-1-8-v;
838	status = "okay";
839};
840
841&wdog1 {
842	status = "disabled";
843};
844
845&wdog2 {
846	pinctrl-names = "default";
847	pinctrl-0 = <&pinctrl_wdog>;
848	fsl,ext-reset-output;
849	status = "okay";
850};
851