1 2 What: /sys/class/net/<iface>/grcan/enable0 3 Date: October 2012 4 KernelVersion: 3.8 5 Contact: Andreas Larsson <andreas@gaisler.com> 6 Description: 7 Hardware configuration of physical interface 0. This file reads 8 and writes the "Enable 0" bit of the configuration register. 9 Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP 10 core library documentation for details. The default value is 0 11 or set by the module parameter grcan.enable0 and can be read at 12 /sys/module/grcan/parameters/enable0. 13 14 What: /sys/class/net/<iface>/grcan/enable1 15 Date: October 2012 16 KernelVersion: 3.8 17 Contact: Andreas Larsson <andreas@gaisler.com> 18 Description: 19 Hardware configuration of physical interface 1. This file reads 20 and writes the "Enable 1" bit of the configuration register. 21 Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP 22 core library documentation for details. The default value is 0 23 or set by the module parameter grcan.enable1 and can be read at 24 /sys/module/grcan/parameters/enable1. 25 26 What: /sys/class/net/<iface>/grcan/select 27 Date: October 2012 28 KernelVersion: 3.8 29 Contact: Andreas Larsson <andreas@gaisler.com> 30 Description: 31 Configuration of which physical interface to be used. Possible 32 values: 0 or 1. See the GRCAN chapter of the GRLIB IP core 33 library documentation for details. The default value is 0 or is 34 set by the module parameter grcan.select and can be read at 35 /sys/module/grcan/parameters/select. 36