/linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
D | imx25-pdk.dts | 16 reg = <0x80000000 0x4000000>; 19 reg_fec_3v3: regulator-0 { 24 gpio = <&gpio2 3 0>; 47 gpio = <&gpio4 6 0>; 67 fsl,pcr = <0xfa208b80>; 88 pinctrl-0 = <&pinctrl_audmux>; 94 pinctrl-0 = <&pinctrl_can1>; 101 pinctrl-0 = <&pinctrl_esdhc1>; 103 wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; 110 pinctrl-0 = <&pinctrl_fec>; [all …]
|
D | imx25-eukrea-mbimxsd25-baseboard.dts | 19 pinctrl-0 = <&pinctrl_gpiokeys>; 32 pinctrl-0 = <&pinctrl_gpioled>; 52 pinctrl-0 = <&pinctrl_audmux>; 58 pinctrl-0 = <&pinctrl_esdhc1>; 66 reg = <0x1a>; 74 MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0 75 MX25_PAD_KPP_COL2__AUD5_TXC 0xe0 76 MX25_PAD_KPP_COL1__AUD5_RXD 0xe0 77 MX25_PAD_KPP_COL0__AUD5_TXD 0xe0 83 MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0 [all …]
|
D | imx53-voipac-bsb.dts | 25 pinctrl-0 = <&led_pin_gpio>; 29 gpios = <&gpio3 29 0>; 35 gpios = <&gpio2 31 0>; 43 pinctrl-0 = <&pinctrl_hog>; 49 MX53_PAD_EIM_D25__GPIO3_25 0x80000000 51 MX53_PAD_EIM_A19__GPIO2_19 0x80000000 57 MX53_PAD_EIM_D29__GPIO3_29 0x80000000 58 MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 65 MX53_PAD_GPIO_9__KPP_COL_6 0xe8 66 MX53_PAD_GPIO_4__KPP_COL_7 0xe8 [all …]
|
D | imx53-tx53.dtsi | 55 reg = <0x70000000 0>; 69 clock-frequency = <0>; 75 #clock-cells = <0>; 82 pinctrl-0 = <&pinctrl_gpio_key>; 95 pinctrl-0 = <&pinctrl_stk5led>; 124 pinctrl-0 = <&pinctrl_can_xcvr>; 134 pinctrl-0 = <&pinctrl_usbh1_vbus>; 145 pinctrl-0 = <&pinctrl_usbotg_vbus>; 167 pinctrl-0 = <&pinctrl_ssi1>; 173 pinctrl-0 = <&pinctrl_can1>; [all …]
|
/linux-6.12.1/tools/perf/pmu-events/arch/x86/bonnell/ |
D | other.json | 4 "Counter": "0,1", 5 "EventCode": "0x7D", 8 "UMask": "0x40" 12 "Counter": "0,1", 13 "EventCode": "0x61", 16 "UMask": "0x20" 20 "Counter": "0,1", 21 "EventCode": "0x61", 27 "Counter": "0,1", 28 "EventCode": "0x64", [all …]
|
/linux-6.12.1/drivers/media/i2c/ |
D | vgxy61.c | 30 #define VGXY61_REG_MODEL_ID CCI_REG16_LE(0x0000) 31 #define VG5661_MODEL_ID 0x5661 32 #define VG5761_MODEL_ID 0x5761 33 #define VGXY61_REG_REVISION CCI_REG16_LE(0x0002) 34 #define VGXY61_REG_FWPATCH_REVISION CCI_REG16_LE(0x0014) 35 #define VGXY61_REG_FWPATCH_START_ADDR CCI_REG8(0x2000) 36 #define VGXY61_REG_SYSTEM_FSM CCI_REG8(0x0020) 37 #define VGXY61_SYSTEM_FSM_SW_STBY 0x03 38 #define VGXY61_SYSTEM_FSM_STREAMING 0x04 39 #define VGXY61_REG_NVM CCI_REG8(0x0023) [all …]
|
/linux-6.12.1/drivers/scsi/aic7xxx/ |
D | aic79xx_reg_print.c_shipped | 12 { "SPLTINT", 0x01, 0x01 }, 13 { "CMDCMPLT", 0x02, 0x02 }, 14 { "SEQINT", 0x04, 0x04 }, 15 { "SCSIINT", 0x08, 0x08 }, 16 { "PCIINT", 0x10, 0x10 }, 17 { "SWTMINT", 0x20, 0x20 }, 18 { "BRKADRINT", 0x40, 0x40 }, 19 { "HWERRINT", 0x80, 0x80 }, 20 { "INT_PEND", 0xff, 0xff } 27 0x01, regvalue, cur_col, wrap)); [all …]
|
D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
D | aic7xxx_reg_print.c_shipped | 12 { "SCSIRSTO", 0x01, 0x01 }, 13 { "ENAUTOATNP", 0x02, 0x02 }, 14 { "ENAUTOATNI", 0x04, 0x04 }, 15 { "ENAUTOATNO", 0x08, 0x08 }, 16 { "ENRSELI", 0x10, 0x10 }, 17 { "ENSELI", 0x20, 0x20 }, 18 { "ENSELO", 0x40, 0x40 }, 19 { "TEMODE", 0x80, 0x80 } 26 0x00, regvalue, cur_col, wrap)); 30 { "CLRCHN", 0x02, 0x02 }, [all …]
|
/linux-6.12.1/lib/fonts/ |
D | font_ter16x32.c | 8 { 0, 0, FONTDATAMAX, 0 }, { 9 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 10 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x7f, 0xfc, 11 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 12 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 13 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 14 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 0x70, 0x1c, 15 0x7f, 0xfc, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00, 16 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0 */ 17 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, [all …]
|
D | font_sun12x22.c | 7 { 0, 0, FONTDATAMAX, 0 }, { 8 /* 0 0x00 '^@' */ 9 0x00, 0x00, /* 000000000000 */ 10 0x00, 0x00, /* 000000000000 */ 11 0x00, 0x00, /* 000000000000 */ 12 0x00, 0x00, /* 000000000000 */ 13 0x00, 0x00, /* 000000000000 */ 14 0x00, 0x00, /* 000000000000 */ 15 0x00, 0x00, /* 000000000000 */ 16 0x00, 0x00, /* 000000000000 */ [all …]
|
/linux-6.12.1/arch/m68k/68000/ |
D | bootlogo.h | 7 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x01, 0x00, 0x00, 0x00, 8 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 9 0x00, 0x00, 0x40, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 10 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x55, 11 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 12 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xac, 0x00, 0x00, 0x00, 0x00, 0x00, 13 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 14 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 15 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 16 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, [all …]
|
/linux-6.12.1/crypto/ |
D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 194 "\x9C\xE6\x16\xCE\x62\x4A\x11\xE0\x08\x6D\x34\x1E\xBC\xAC\xA0\xA1" 200 "\x79\x7C\x3F\xA7\xA2\xCD\xCB\x3C\xD1\xE0\xBD\xBA\x26\x54\xB4\xF9" 212 "\xEB\x7E\x8B\x4F\x10\xA7\x54\x9E\x8E\xED\xF5\xB4\xFC\xE0\x9E\x05" 214 "\x00\x8E\x3C\x05\x21\xFE\x15\xE0\xEA\x06\xA3\x6F\xF0\xF1\x0C\x99" 238 "\x7F\xAF\xB8\xE0\xA3\xDF\xC7\x37\x72\x3E\xE6\xB4\xB7\xD9\x3A\x25" 240 "\x4E\xE0\xAA\xB1\x2D\x7B\x61\xA5\x1F\x52\x7A\x9A\x41\xF6\xC1\x68" 310 "\x6D\xAF\x53\xFA\x71\xE2\x67\xE0\x9A\xFE\x03\xA9\x85\xD2\xC9\xAA" 356 "\x5E\xD8\xDC\xDA\x53\x44\xC4\x67\xE0\x92\x51\x34\xE4\x83\xA5\x4D" [all …]
|
/linux-6.12.1/drivers/media/i2c/cx25840/ |
D | cx25840-vbi.c | 25 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, in decode_vps() 26 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, in decode_vps() 27 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, in decode_vps() 28 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, in decode_vps() 29 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, in decode_vps() 30 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, in decode_vps() 31 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, in decode_vps() 32 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, in decode_vps() 33 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, in decode_vps() 34 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, in decode_vps() [all …]
|
/linux-6.12.1/drivers/media/pci/cx18/ |
D | cx18-av-vbi.c | 18 * 4 byte EAV code: 0xff 0x00 0x00 0xRP 20 * 3 byte Anc data preamble: 0x00 0xff 0xff 24 * 2 byte Internal DID: VBI-line-# 0x80 31 * 0xb0 (Task 0 VerticalBlank HorizontalBlank 0 0 0 0) 32 * 0xf0 (Task EvenField VerticalBlank HorizontalBlank 0 0 0 0) 36 * 0x90 (Task 0 0 HorizontalBlank 0 0 0 0) 37 * 0xd0 (Task EvenField 0 HorizontalBlank 0 0 0 0) 40 * 0x91 (1 0 010 0 !ActiveLine AncDataPresent) 41 * 0x55 (0 1 010 2ndField !ActiveLine AncDataPresent) 44 static const u8 sliced_vbi_did[2] = { 0x91, 0x55 }; [all …]
|
/linux-6.12.1/drivers/cpufreq/ |
D | elanfreq.c | 28 #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ 29 #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ 45 {1000, 0x02, 0x18}, 46 {2000, 0x02, 0x10}, 47 {4000, 0x02, 0x08}, 48 {8000, 0x00, 0x00}, 49 {16000, 0x00, 0x02}, 50 {33000, 0x00, 0x04}, 51 {66000, 0x01, 0x04}, 52 {99000, 0x01, 0x05} [all …]
|
/linux-6.12.1/drivers/media/usb/au0828/ |
D | au0828-input.c | 46 char buf[] = { (reg >> 8) | 0x80, reg & 0xff, data }; in au8522_rc_write() 47 struct i2c_msg msg = { .addr = ir->i2c_dev_addr, .flags = 0, in au8522_rc_write() 52 if (rc < 0) in au8522_rc_write() 55 return (rc == 1) ? 0 : -EIO; in au8522_rc_write() 63 struct i2c_msg msg[2] = { { .addr = ir->i2c_dev_addr, .flags = 0, in au8522_rc_read() 68 obuf[0] = 0x40 | reg >> 8; in au8522_rc_read() 69 obuf[1] = reg & 0xff; in au8522_rc_read() 70 if (val >= 0) { in au8522_rc_read() 72 msg[0].len++; in au8522_rc_read() 77 if (rc < 0) in au8522_rc_read() [all …]
|
/linux-6.12.1/kernel/debug/kdb/ |
D | kdb_keyboard.c | 20 #define KBD_STATUS_REG 0x64 /* Status register (R) */ 21 #define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */ 25 #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ 26 #define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ 39 static int shift_lock; /* CAPS LOCK state (0-off, 1-on) */ in kdb_get_kbd_char() 45 (inb(KBD_STATUS_REG) == 0xff && inb(KBD_DATA_REG) == 0xff)) { in kdb_get_kbd_char() 46 kbd_exists = 0; in kdb_get_kbd_char() 51 if ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0) in kdb_get_kbd_char() 73 if (((scancode&0x7f) == 0x2a) || ((scancode&0x7f) == 0x36)) { in kdb_get_kbd_char() 77 if ((scancode & 0x80) == 0) in kdb_get_kbd_char() [all …]
|
/linux-6.12.1/sound/soc/sdw_utils/ |
D | soc_sdw_rt_amp_coeff_tables.h | 15 0xb0, 0xc5, 0x00, /* address: 0xc5b0; data: 0x00 */ 16 0xb1, 0xc5, 0x32, 17 0xb2, 0xc5, 0x44, 18 0xb3, 0xc5, 0x19, 19 0xc0, 0xc5, 0x04, 20 0xc1, 0xc5, 0x00, 21 0xc2, 0xc5, 0x00, 22 0xc3, 0xc5, 0x00, 23 0xd0, 0xc5, 0x02, 24 0xd1, 0xc5, 0x00, [all …]
|
/linux-6.12.1/drivers/gpu/drm/panel/ |
D | panel-leadtek-ltk500hd1829.c | 47 { 0xE0, 0x00 }, 49 { 0xE1, 0x93 }, 50 { 0xE2, 0x65 }, 51 { 0xE3, 0xF8 }, 52 { 0x80, 0x03 }, /* 0X03:4-LANE; 0X02:3-LANE; 0X01:2-LANE */ 54 { 0xE0, 0x01 }, 56 { 0x00, 0x00 }, 57 { 0x01, 0x6F }, 59 { 0x17, 0x00 }, 60 { 0x18, 0xAF }, /* 4.3V */ [all …]
|
/linux-6.12.1/sound/soc/codecs/ |
D | es8326.c | 58 crosstalk_h &= 0x20; in es8326_crosstalk1_get() 59 crosstalk_l &= 0xf0; in es8326_crosstalk1_get() 61 ucontrol->value.integer.value[0] = crosstalk; in es8326_crosstalk1_get() 63 return 0; in es8326_crosstalk1_get() 74 crosstalk = ucontrol->value.integer.value[0]; in es8326_crosstalk1_set() 76 crosstalk_h = (crosstalk & 0x10) << 1; in es8326_crosstalk1_set() 77 crosstalk_l &= 0x0f; in es8326_crosstalk1_set() 78 crosstalk_l |= (crosstalk & 0x0f) << 4; in es8326_crosstalk1_set() 80 0x20, crosstalk_h); in es8326_crosstalk1_set() 83 return 0; in es8326_crosstalk1_set() [all …]
|
/linux-6.12.1/drivers/gpio/ |
D | gpio-f7188x.c | 23 #define SIO_LDSEL 0x07 /* Logical device select */ 24 #define SIO_DEVID 0x20 /* Device ID (2 bytes) */ 26 #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ 27 #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ 32 #define SIO_FINTEK_DEVREV 0x22 /* Fintek Device revision */ 33 #define SIO_FINTEK_MANID 0x23 /* Fintek ID (2 bytes) */ 35 #define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */ 37 #define SIO_F71869_ID 0x0814 /* F71869 chipset ID */ 38 #define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */ 39 #define SIO_F71882_ID 0x0541 /* F71882 chipset ID */ [all …]
|
/linux-6.12.1/arch/powerpc/include/uapi/asm/ |
D | tm.h | 7 * the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. 9 #define TM_CAUSE_PERSISTENT 0x01 10 #define TM_CAUSE_KVM_RESCHED 0xe0 /* From PAPR */ 11 #define TM_CAUSE_KVM_FAC_UNAV 0xe2 /* From PAPR */ 12 #define TM_CAUSE_RESCHED 0xde 13 #define TM_CAUSE_TLBI 0xdc 14 #define TM_CAUSE_FAC_UNAV 0xda 15 #define TM_CAUSE_SYSCALL 0xd8 16 #define TM_CAUSE_MISC 0xd6 /* future use */ 17 #define TM_CAUSE_SIGNAL 0xd4 [all …]
|
/linux-6.12.1/drivers/regulator/ |
D | mt6397-regulator.c | 54 .enable_mask = BIT(0), \ 103 REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), 107 REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), 111 REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), 184 if (ret != 0) { in mt6397_regulator_set_mode() 190 return 0; in mt6397_regulator_set_mode() 199 if (ret != 0) { in mt6397_regulator_get_mode() 225 if (ret != 0) { in mt6397_get_status() 270 buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f, 273 buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f, [all …]
|
/linux-6.12.1/sound/drivers/opl4/ |
D | opl4_local.h | 43 #define OPL4_REG_TEST0 0x00 44 #define OPL4_REG_TEST1 0x01 46 #define OPL4_REG_MEMORY_CONFIGURATION 0x02 47 #define OPL4_MODE_BIT 0x01 48 #define OPL4_MTYPE_BIT 0x02 49 #define OPL4_TONE_HEADER_MASK 0x1c 50 #define OPL4_DEVICE_ID_MASK 0xe0 52 #define OPL4_REG_MEMORY_ADDRESS_HIGH 0x03 53 #define OPL4_REG_MEMORY_ADDRESS_MID 0x04 54 #define OPL4_REG_MEMORY_ADDRESS_LOW 0x05 [all …]
|