/linux-6.12.1/Documentation/devicetree/bindings/memory-controllers/ |
D | ingenic,nemc.yaml | 14 pattern: "^memory-controller@[0-9a-f]+$" 40 ".*@[0-9]+$": 61 reg = <0x13410000 0x10000>; 64 ranges = <1 0 0x1b000000 0x1000000>, 65 <2 0 0x1a000000 0x1000000>, 66 <3 0 0x19000000 0x1000000>, 67 <4 0 0x18000000 0x1000000>, 68 <5 0 0x17000000 0x1000000>, 69 <6 0 0x16000000 0x1000000>; 78 pinctrl-0 = <&pins_nemc_cs6>; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/mtd/ |
D | ingenic,nand.yaml | 66 reg = <0x13410000 0x10000>; 69 ranges = <1 0 0x1b000000 0x1000000>, 70 <2 0 0x1a000000 0x1000000>, 71 <3 0 0x19000000 0x1000000>, 72 <4 0 0x18000000 0x1000000>, 73 <5 0 0x17000000 0x1000000>, 74 <6 0 0x16000000 0x1000000>; 80 reg = <1 0 0x1000000>; 83 #size-cells = <0>; 94 pinctrl-0 = <&pins_nemc>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/arm/ |
D | integrator.dtsi | 12 reg = <0x0 0x0>; 17 reg = <0x10000000 0x200>; 18 ranges = <0x0 0x10000000 0x200>; 23 led@c,0 { 25 reg = <0x0c 0x04>; 26 offset = <0x0c>; 27 mask = <0x01>; 36 reg = <0x12000000 0x100>; 40 reg = <0x13000000 0x100>; 46 reg = <0x13000100 0x100>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/broadcom/ |
D | bcm-cygnus-clock.dtsi | 39 #clock-cells = <0>; 46 #clock-cells = <0>; 49 reg = <0x19000000 0x1000>; 54 #clock-cells = <0>; 63 #clock-cells = <0>; 73 reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; 81 #clock-cells = <0>; 90 #clock-cells = <0>; 100 reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; 109 reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; [all …]
|
D | bcm-hr2.dtsi | 45 #size-cells = <0>; 47 cpu0: cpu@0 { 51 reg = <0x0>; 64 ranges = <0x00000000 0x19000000 0x00023000>; 68 a9pll: arm_clk@0 { 69 #clock-cells = <0>; 72 reg = <0x0 0x1000>; 77 reg = <0x20200 0x100>; 84 reg = <0x20600 0x20>; 92 reg = <0x20620 0x20>; [all …]
|
D | bcm-ns.dtsi | 26 ranges = <0x00000000 0x18000000 0x00001000>; 32 reg = <0x0300 0x100>; 40 reg = <0x0400 0x100>; 44 pinctrl-0 = <&pinmux_uart1>; 51 ranges = <0x00000000 0x19000000 0x00023000>; 57 reg = <0x20000 0x100>; 62 reg = <0x20200 0x100>; 69 reg = <0x20600 0x20>; 78 #address-cells = <0>; 80 reg = <0x21000 0x1000>, [all …]
|
D | bcm-cygnus.dtsi | 48 memory@0 { 50 reg = <0 0>; 55 #size-cells = <0>; 57 cpu@0 { 61 reg = <0x0>; 74 ranges = <0x00000000 0x19000000 0x1000000>; 80 reg = <0x20200 0x100>; 88 #address-cells = <0>; 90 reg = <0x21000 0x1000>, 91 <0x20100 0x100>; [all …]
|
D | bcm-nsp.dtsi | 54 #size-cells = <0>; 56 cpu0: cpu@0 { 60 reg = <0x0>; 68 secondary-boot-reg = <0xffff0fec>; 69 reg = <0x1>; 82 ranges = <0x00000000 0x19000000 0x00023000>; 86 a9pll: arm_clk@0 { 87 #clock-cells = <0>; 90 reg = <0x00000 0x1000>; 95 reg = <0x20200 0x100>; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/net/ |
D | qca,ar71xx.yaml | 78 reg = <0x19000000 0x200>; 90 reg = <0x1a000000 0x200>; 106 #size-cells = <0>; 110 reg = <0x10>; 122 #size-cells = <0>; 124 switch_port0: port@0 { 125 reg = <0x0>; 137 reg = <0x1>; 143 reg = <0x2>; 149 reg = <0x3>; [all …]
|
/linux-6.12.1/arch/mips/sni/ |
D | a20r.c | 30 PORT(0x3f8, 4), 31 PORT(0x2f8, 3), 45 .start = 0x1c081ffc, 46 .end = 0x1c081fff, 59 .start = 0x18000000, 60 .end = 0x18000004, 64 .start = 0x18010000, 65 .end = 0x18010004, 69 .start = 0x1ff00000, 70 .end = 0x1ff00020, [all …]
|
D | rm200.c | 37 MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), 38 MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), 52 .start = 0x1cd41ffc, 53 .end = 0x1cd41fff, 66 .start = 0x18000000, 67 .end = 0x180fffff, 71 .start = 0x1b000000, 72 .end = 0x1b000004, 76 .start = 0x1ff00000, 77 .end = 0x1ff00020, [all …]
|
/linux-6.12.1/arch/powerpc/boot/dts/fsl/ |
D | p1022ds.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x8000000>; 44 partition@0 { 45 reg = <0x0 0x03000000>; 51 reg = <0x03000000 0x00e00000>; 57 reg = <0x03e00000 0x00200000>; 63 reg = <0x04000000 0x00400000>; 69 reg = <0x04400000 0x03b00000>; 74 reg = <0x07f00000 0x00080000>; 80 reg = <0x07f80000 0x00080000>; [all …]
|
/linux-6.12.1/arch/mips/boot/dts/qca/ |
D | ar9331.dtsi | 12 #size-cells = <0>; 14 cpu@0 { 18 reg = <0>; 34 #clock-cells = <0>; 57 reg = <0x18000000 0x100>; 64 reg = <0x18020000 0x14>; 76 reg = <0x18040000 0x34>; 92 reg = <0x18050000 0x100>; 102 reg = <0x18060010 0x8>; 113 reg = <0x1806001c 0x4>; [all …]
|
/linux-6.12.1/arch/mips/pci/ |
D | pci-lantiq.c | 27 #define PCI_CR_FCI_ADDR_MAP0 0x00C0 28 #define PCI_CR_FCI_ADDR_MAP1 0x00C4 29 #define PCI_CR_FCI_ADDR_MAP2 0x00C8 30 #define PCI_CR_FCI_ADDR_MAP3 0x00CC 31 #define PCI_CR_FCI_ADDR_MAP4 0x00D0 32 #define PCI_CR_FCI_ADDR_MAP5 0x00D4 33 #define PCI_CR_FCI_ADDR_MAP6 0x00D8 34 #define PCI_CR_FCI_ADDR_MAP7 0x00DC 35 #define PCI_CR_CLK_CTRL 0x0000 36 #define PCI_CR_PCI_MOD 0x0030 [all …]
|
/linux-6.12.1/arch/arm/mach-versatile/ |
D | integrator-hardware.h | 14 #define IO_BASE 0xF0000000 // VA of IO 15 #define IO_SIZE 0x0B000000 // How much? 19 #define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) 25 #define INTEGRATOR_BOOT_ROM_LO 0x00000000 26 #define INTEGRATOR_BOOT_ROM_HI 0x20000000 40 #define INTEGRATOR_SSRAM_BASE 0x00000000 41 #define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 44 #define INTEGRATOR_FLASH_BASE 0x24000000 47 #define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 53 #define INTEGRATOR_SDRAM_BASE 0x00040000 [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/mediatek/ |
D | mt6797.dtsi | 25 #size-cells = <0>; 27 cpu0: cpu@0 { 31 reg = <0x000>; 38 reg = <0x001>; 45 reg = <0x002>; 52 reg = <0x003>; 59 reg = <0x100>; 66 reg = <0x101>; 73 reg = <0x102>; 80 reg = <0x103>; [all …]
|
D | mt2712e.dtsi | 22 cluster0_opp: opp-table-0 { 66 #size-cells = <0>; 85 cpu0: cpu@0 { 88 reg = <0x000>; 100 reg = <0x001>; 113 reg = <0x200>; 126 CPU_SLEEP_0: cpu-sleep-0 { 132 arm,psci-suspend-param = <0x0010000>; 135 CLUSTER_SLEEP_0: cluster-sleep-0 { 141 arm,psci-suspend-param = <0x1010000>; [all …]
|
/linux-6.12.1/arch/mips/boot/dts/ingenic/ |
D | jz4780.dtsi | 13 #size-cells = <0>; 15 cpu0: cpu@0 { 17 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 18 reg = <0>; 26 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 35 #address-cells = <0>; 43 reg = <0x10001000 0x50>; 54 #clock-cells = <0>; 59 #clock-cells = <0>; 65 reg = <0x10000000 0x100>; [all …]
|
/linux-6.12.1/drivers/net/usb/ |
D | lan78xx.h | 9 #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 10 #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 11 #define USB_VENDOR_REQUEST_GET_STATS 0xA2 32 #define TX_CMD_A_IGE_ (0x20000000) 33 #define TX_CMD_A_ICE_ (0x10000000) 34 #define TX_CMD_A_LSO_ (0x08000000) 35 #define TX_CMD_A_IPE_ (0x04000000) 36 #define TX_CMD_A_TPE_ (0x02000000) 37 #define TX_CMD_A_IVTG_ (0x01000000) 38 #define TX_CMD_A_RVTG_ (0x00800000) [all …]
|
/linux-6.12.1/arch/mips/alchemy/devboards/ |
D | db1300.c | 39 #define DB1300_IDE_INT (DB1300_FIRST_INT + 0) 57 #define DB1300_ETH_PHYS_ADDR 0x19000000 58 #define DB1300_ETH_PHYS_END 0x197fffff 61 #define DB1300_IDE_PHYS_ADDR 0x18800000 66 #define DB1300_NAND_PHYS_ADDR 0x20000000 67 #define DB1300_NAND_PHYS_END 0x20000fff 71 { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ 72 { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ 85 /* wake-from-str pins 0-3 */ 137 i = &db1300_dev_pins[0]; in db1300_gpio_config() [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/apm/ |
D | apm-shadowcat.dtsi | 16 #size-cells = <0>; 18 cpu@0 { 21 reg = <0x0 0x000>; 23 cpu-release-addr = <0x1 0x0000fff8>; 26 clocks = <&pmd0clk 0>; 31 reg = <0x0 0x001>; 33 cpu-release-addr = <0x1 0x0000fff8>; 36 clocks = <&pmd0clk 0>; 41 reg = <0x0 0x100>; 43 cpu-release-addr = <0x1 0x0000fff8>; [all …]
|
D | apm-storm.dtsi | 16 #size-cells = <0>; 18 cpu@0 { 21 reg = <0x0 0x000>; 23 cpu-release-addr = <0x1 0x0000fff8>; 29 reg = <0x0 0x001>; 31 cpu-release-addr = <0x1 0x0000fff8>; 37 reg = <0x0 0x100>; 39 cpu-release-addr = <0x1 0x0000fff8>; 45 reg = <0x0 0x101>; 47 cpu-release-addr = <0x1 0x0000fff8>; [all …]
|
/linux-6.12.1/arch/hexagon/kernel/ |
D | vm_init_segtable.S | 16 * Start with mapping PA=0 to both VA=0x0 and VA=0xc000000 as 16MB large pages. 46 /* VA 0x00000000 */ 59 /* VA 0x40000000 */ 68 /* VA 0x80000000 */ 74 /*0xa8*/.word X,X,X,X 77 /*0xa9*/.word BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000) 79 /*0xa9*/.word X,X,X,X 81 /*0xaa*/.word X,X,X,X 82 /*0xab*/.word X,X,X,X 83 /*0xac*/.word X,X,X,X [all …]
|
/linux-6.12.1/arch/mips/include/asm/mach-ath79/ |
D | ar71xx_regs.h | 19 #define AR71XX_APB_BASE 0x18000000 20 #define AR71XX_GE0_BASE 0x19000000 21 #define AR71XX_GE0_SIZE 0x10000 22 #define AR71XX_GE1_BASE 0x1a000000 23 #define AR71XX_GE1_SIZE 0x10000 24 #define AR71XX_EHCI_BASE 0x1b000000 25 #define AR71XX_EHCI_SIZE 0x1000 26 #define AR71XX_OHCI_BASE 0x1c000000 27 #define AR71XX_OHCI_SIZE 0x1000 28 #define AR71XX_SPI_BASE 0x1f000000 [all …]
|
/linux-6.12.1/crypto/ |
D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|