1 /* 2 * Copyright (c) 2016-2021 The Linux Foundation. All rights reserved. 3 * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for 6 * any purpose with or without fee is hereby granted, provided that the 7 * above copyright notice and this permission notice appear in all 8 * copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 11 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED 12 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE 13 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL 14 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 15 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 16 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 17 * PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 /* 21 * This file contains the API definitions for the Unified Wireless Module 22 * Interface (WMI). 23 */ 24 25 #ifndef _WMI_UNIFIED_PARAM_H_ 26 #define _WMI_UNIFIED_PARAM_H_ 27 28 #include <wlan_scan_public_structs.h> 29 #ifdef FEATURE_WLAN_TDLS 30 #include <wlan_tdls_public_structs.h> 31 #endif 32 #ifdef WLAN_CONV_SPECTRAL_ENABLE 33 #include <wlan_spectral_public_structs.h> 34 #endif /* WLAN_CONV_SPECTRAL_ENABLE */ 35 36 #include "wifi_pos_public_struct.h" 37 #include <wlan_vdev_mgr_tgt_if_tx_defs.h> 38 #include <wlan_vdev_mgr_tgt_if_rx_defs.h> 39 #include <reg_services_public_struct.h> 40 41 #ifndef ENABLE_HOST_TO_TARGET_CONVERSION 42 #include <wmi_unified.h> 43 #endif 44 45 #define MAC_MAX_KEY_LENGTH 32 46 #define MAC_PN_LENGTH 8 47 #define MAX_MAC_HEADER_LEN 32 48 #define MIN_MAC_HEADER_LEN 24 49 #define QOS_CONTROL_LEN 2 50 51 #define WMI_MAC_MAX_SSID_LENGTH 32 52 #ifndef CONFIG_HL_SUPPORT 53 #define mgmt_tx_dl_frm_len 64 54 #else 55 #define mgmt_tx_dl_frm_len 1532 56 #endif 57 #define WMI_SMPS_MASK_LOWER_16BITS 0xFF 58 #define WMI_SMPS_MASK_UPPER_3BITS 0x7 59 #define WMI_SMPS_PARAM_VALUE_S 29 60 #define WMI_UNIT_TEST_MAX_NUM_ARGS 100 61 /* The size of the utc time in bytes. */ 62 #define WMI_SIZE_UTC_TIME (10) 63 /* The size of the utc time error in bytes. */ 64 #define WMI_SIZE_UTC_TIME_ERROR (5) 65 #ifdef WLAN_MCC_MIN_CHANNEL_QUOTA 66 #define WMI_MCC_MIN_CHANNEL_QUOTA WLAN_MCC_MIN_CHANNEL_QUOTA 67 #define WMI_MCC_MAX_CHANNEL_QUOTA (100 - WLAN_MCC_MIN_CHANNEL_QUOTA) 68 #else 69 #define WMI_MCC_MIN_CHANNEL_QUOTA 20 70 #define WMI_MCC_MAX_CHANNEL_QUOTA 80 71 #endif 72 #define WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY 30 73 74 #ifdef WMI_AP_SUPPORT 75 #define WMI_BEACON_TX_BUFFER_SIZE (2500) 76 #else 77 #define WMI_BEACON_TX_BUFFER_SIZE (512) 78 #endif 79 80 #define WMI_WIFI_SCANNING_MAC_OUI_LENGTH 3 81 #define WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 82 #define WMI_RSSI_THOLD_DEFAULT -300 83 #define WMI_NLO_FREQ_THRESH 1000 84 #define WMI_SEC_TO_MSEC(sec) (sec * 1000) 85 #define WMI_MSEC_TO_USEC(msec) (msec * 1000) 86 #define WMI_ETH_LEN 64 87 #define WMI_QOS_NUM_TSPEC_MAX 2 88 #define WMI_IPV4_ADDR_LEN 4 89 #define WMI_KEEP_ALIVE_NULL_PKT 1 90 #define WMI_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 91 #define WMI_KEEP_ALIVE_MGMT_FRAME 5 92 #define WMI_MAC_MAX_KEY_LENGTH 32 93 #define WMI_KRK_KEY_LEN 16 94 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 95 #define WMI_BTK_KEY_LEN 32 96 #define WMI_ROAM_R0KH_ID_MAX_LEN 48 97 #define WMI_ROAM_SCAN_PSK_SIZE 48 98 #endif 99 #define WMI_NOISE_FLOOR_DBM_DEFAULT (-96) 100 #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 101 #define WMI_ROAM_MAX_CHANNELS 80 102 #ifdef FEATURE_WLAN_EXTSCAN 103 #define WMI_MAX_EXTSCAN_MSG_SIZE 1536 104 #define WMI_EXTSCAN_REST_TIME 100 105 #define WMI_EXTSCAN_MAX_SCAN_TIME 50000 106 #define WMI_EXTSCAN_BURST_DURATION 150 107 #endif 108 #define WMI_SCAN_NPROBES_DEFAULT (2) 109 #define WMI_SEC_TO_MSEC(sec) (sec * 1000) /* sec to msec */ 110 #define WMI_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */ 111 #define WMI_NLO_FREQ_THRESH 1000 /* in MHz */ 112 113 #define WMI_SVC_MSG_MAX_SIZE 1536 114 #define MAX_UTF_EVENT_LENGTH 2048 115 #define MAX_WMI_UTF_LEN 252 116 #define MAX_WMI_QVIT_LEN 252 117 #define THERMAL_LEVELS 4 118 #define WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES 256 119 #define WMI_HOST_BCN_FLT_MAX_ELEMS_IE_LIST \ 120 (WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES/32) 121 #define LTEU_MAX_BINS 10 122 #define ATF_ACTIVED_MAX_CLIENTS 50 123 #define ATF_ACTIVED_MAX_ATFGROUPS 16 124 #define CTL_5G_SIZE 1536 125 #define CTL_2G_SIZE 684 126 #define MAX_CTL_SIZE (CTL_5G_SIZE > CTL_2G_SIZE ? CTL_5G_SIZE : CTL_2G_SIZE) 127 #define IEEE80211_MICBUF_SIZE (8+8) 128 #define IEEE80211_TID_SIZE 17 129 #define WME_NUM_AC 4 130 #define SMART_ANT_MODE_SERIAL 0 131 #define SMART_ANT_MODE_PARALLEL 1 132 #define IEEE80211_WEP_NKID 4 /* number of key ids */ 133 #define WPI_IV_LEN 16 134 #define WMI_SCAN_MAX_NUM_BSSID 10 135 #define MAX_CHANS 1023 136 #define TARGET_OEM_CONFIGURE_LCI 0x0A 137 #define RTT_LCI_ALTITUDE_MASK 0x3FFFFFFF 138 #define TARGET_OEM_CONFIGURE_LCR 0x09 139 #define RTT_TIMEOUT_MS 180 140 #define MAX_SUPPORTED_RATES 128 141 #define WMI_HOST_MAX_BUFFER_SIZE 1712 142 #define WMI_HAL_MAX_SANTENNA 4 143 #define WMI_HOST_PDEV_VI_PRIORITY_BIT (1<<2) 144 #define WMI_HOST_PDEV_BEACON_PRIORITY_BIT (1<<4) 145 #define WMI_HOST_PDEV_MGMT_PRIORITY_BIT (1<<5) 146 #define WMI_MAX_CMDS 1024 147 148 #define FIPS_ALIGN 4 149 #define FIPS_ALIGNTO(__addr, __to) \ 150 ((((unsigned long int)(__addr)) + (__to) - 1) & ~((__to) - 1)) 151 #define FIPS_IS_ALIGNED(__addr, __to) \ 152 (!(((unsigned long int)(__addr)) & ((__to)-1))) 153 154 #define WMI_HOST_MAX_SERIAL_ANTENNA 2 155 #define WMI_SMART_ANT_MAX_RATE_SERIES 2 156 157 #define WMI_HOST_F_MS(_v, _f) \ 158 (((_v) & (_f)) >> (_f##_S)) 159 160 #define WMI_HOST_F_RMW(_var, _v, _f) \ 161 do { \ 162 (_var) &= ~(_f); \ 163 (_var) |= (((_v) << (_f##_S)) & (_f)); \ 164 } while (0) 165 166 /* vdev capabilities bit mask */ 167 #define WMI_HOST_VDEV_BEACON_SUPPORT 0x1 168 #define WMI_HOST_VDEV_WDS_LRN_ENABLED 0x2 169 #define WMI_HOST_VDEV_VOW_ENABLED 0x4 170 #define WMI_HOST_VDEV_IS_BEACON_SUPPORTED(param) \ 171 ((param) & WMI_HOST_VDEV_BEACON_SUPPORT) 172 #define WMI_HOST_VDEV_IS_WDS_LRN_ENABLED(param) \ 173 ((param) & WMI_HOST_VDEV_WDS_LRN_ENABLED) 174 #define WMI_HOST_VDEV_IS_VOW_ENABLED(param) \ 175 ((param) & WMI_HOST_VDEV_VOW_ENABLED) 176 177 /* TXBF capabilities masks */ 178 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_S 0 179 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_M 0x1 180 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE \ 181 (WMI_HOST_TXBF_CONF_SU_TX_BFEE_M << WMI_HOST_TXBF_CONF_SU_TX_BFEE_S) 182 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_GET(x) \ 183 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFEE) 184 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_SET(x, z) \ 185 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFEE) 186 187 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_S 1 188 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_M 0x1 189 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE \ 190 (WMI_HOST_TXBF_CONF_MU_TX_BFEE_M << WMI_HOST_TXBF_CONF_MU_TX_BFEE_S) 191 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_GET(x) \ 192 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFEE) 193 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_SET(x, z) \ 194 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFEE) 195 196 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_S 2 197 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_M 0x1 198 #define WMI_HOST_TXBF_CONF_SU_TX_BFER \ 199 (WMI_HOST_TXBF_CONF_SU_TX_BFER_M << WMI_HOST_TXBF_CONF_SU_TX_BFER_S) 200 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_GET(x) \ 201 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFER) 202 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_SET(x, z) \ 203 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFER) 204 205 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_S 3 206 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_M 0x1 207 #define WMI_HOST_TXBF_CONF_MU_TX_BFER \ 208 (WMI_HOST_TXBF_CONF_MU_TX_BFER_M << WMI_HOST_TXBF_CONF_MU_TX_BFER_S) 209 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_GET(x) \ 210 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFER) 211 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_SET(x, z) \ 212 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFER) 213 214 #define WMI_HOST_TXBF_CONF_STS_CAP_S 4 215 #define WMI_HOST_TXBF_CONF_STS_CAP_M 0x7 216 #define WMI_HOST_TXBF_CONF_STS_CAP \ 217 (WMI_HOST_TXBF_CONF_STS_CAP_M << WMI_HOST_TXBF_CONF_STS_CAP_S) 218 #define WMI_HOST_TXBF_CONF_STS_CAP_GET(x) \ 219 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_STS_CAP); 220 #define WMI_HOST_TXBF_CONF_STS_CAP_SET(x, z) \ 221 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_STS_CAP) 222 223 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_S 7 224 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_M 0x1 225 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF \ 226 (WMI_HOST_TXBF_CONF_IMPLICIT_BF_M << WMI_HOST_TXBF_CONF_IMPLICIT_BF_S) 227 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_GET(x) \ 228 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_IMPLICIT_BF) 229 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_SET(x, z) \ 230 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_IMPLICIT_BF) 231 232 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_S 8 233 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_M 0x7 234 #define WMI_HOST_TXBF_CONF_BF_SND_DIM \ 235 (WMI_HOST_TXBF_CONF_BF_SND_DIM_M << WMI_HOST_TXBF_CONF_BF_SND_DIM_S) 236 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_GET(x) \ 237 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_BF_SND_DIM) 238 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_SET(x, z) \ 239 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_BF_SND_DIM) 240 241 /* The following WMI_HOST_HEOPS_BSSCOLOR_XXX macros correspond to the 242 * WMI_HEOPS_COLOR_XXX macros in the FW wmi_unified.h */ 243 #ifdef SUPPORT_11AX_D3 244 #define WMI_HOST_HEOPS_BSSCOLOR_S 24 245 #else 246 #define WMI_HOST_HEOPS_BSSCOLOR_S 0 247 #endif 248 249 #define WMI_HOST_HEOPS_BSSCOLOR_M 0x3f 250 #define WMI_HOST_HEOPS_BSSCOLOR \ 251 (WMI_HOST_HEOPS_BSSCOLOR_M << WMI_HOST_HEOPS_BSSCOLOR_S) 252 #define WMI_HOST_HEOPS_BSSCOLOR_GET(x) \ 253 WMI_HOST_F_MS(x, WMI_HOST_HEOPS_BSSCOLOR) 254 #define WMI_HOST_HEOPS_BSSCOLOR_SET(x, z) \ 255 WMI_HOST_F_RMW(x, z, WMI_HOST_HEOPS_BSSCOLOR) 256 257 /* The following WMI_HOST_HEOPS_BSSCOLOR_DISABLE_XXX macros correspond to the 258 * WMI_HEOPS_BSSCOLORDISABLE_XXX macros in the FW wmi_unified.h */ 259 #ifdef SUPPORT_11AX_D3 260 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_S 31 261 #else 262 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_S 30 263 #endif 264 265 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_M 0x1 266 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE \ 267 (WMI_HOST_HEOPS_BSSCOLOR_DISABLE_M << WMI_HOST_HEOPS_BSSCOLOR_DISABLE_S) 268 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_GET(x) \ 269 WMI_HOST_F_MS(x, WMI_HOST_HEOPS_BSSCOLOR_DISABLE) 270 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_SET(x, z) \ 271 WMI_HOST_F_RMW(x, z, WMI_HOST_HEOPS_BSSCOLOR_DISABLE) 272 273 /* HE BF capabilities mask */ 274 #define WMI_HOST_HE_BF_CONF_SU_BFEE_S 0 275 #define WMI_HOST_HE_BF_CONF_SU_BFEE_M 0x1 276 #define WMI_HOST_HE_BF_CONF_SU_BFEE \ 277 (WMI_HOST_HE_BF_CONF_SU_BFEE_M << WMI_HOST_HE_BF_CONF_SU_BFEE_S) 278 #define WMI_HOST_HE_BF_CONF_SU_BFEE_GET(x) \ 279 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFEE) 280 #define WMI_HOST_HE_BF_CONF_SU_BFEE_SET(x, z) \ 281 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFEE) 282 283 #define WMI_HOST_HE_BF_CONF_SU_BFER_S 1 284 #define WMI_HOST_HE_BF_CONF_SU_BFER_M 0x1 285 #define WMI_HOST_HE_BF_CONF_SU_BFER \ 286 (WMI_HOST_HE_BF_CONF_SU_BFER_M << WMI_HOST_HE_BF_CONF_SU_BFER_S) 287 #define WMI_HOST_HE_BF_CONF_SU_BFER_GET(x) \ 288 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFER) 289 #define WMI_HOST_HE_BF_CONF_SU_BFER_SET(x, z) \ 290 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFER) 291 292 #define WMI_HOST_HE_BF_CONF_MU_BFEE_S 2 293 #define WMI_HOST_HE_BF_CONF_MU_BFEE_M 0x1 294 #define WMI_HOST_HE_BF_CONF_MU_BFEE \ 295 (WMI_HOST_HE_BF_CONF_MU_BFEE_M << WMI_HOST_HE_BF_CONF_MU_BFEE_S) 296 #define WMI_HOST_HE_BF_CONF_MU_BFEE_GET(x) \ 297 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFEE) 298 #define WMI_HOST_HE_BF_CONF_MU_BFEE_SET(x, z) \ 299 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFEE) 300 301 #define WMI_HOST_HE_BF_CONF_MU_BFER_S 3 302 #define WMI_HOST_HE_BF_CONF_MU_BFER_M 0x1 303 #define WMI_HOST_HE_BF_CONF_MU_BFER \ 304 (WMI_HOST_HE_BF_CONF_MU_BFER_M << WMI_HOST_HE_BF_CONF_MU_BFER_S) 305 #define WMI_HOST_HE_BF_CONF_MU_BFER_GET(x) \ 306 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFER) 307 #define WMI_HOST_HE_BF_CONF_MU_BFER_SET(x, z) \ 308 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFER) 309 310 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_S 4 311 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_M 0x1 312 #define WMI_HOST_HE_BF_CONF_DL_OFDMA \ 313 (WMI_HOST_HE_BF_CONF_DL_OFDMA_M << WMI_HOST_HE_BF_CONF_DL_OFDMA_S) 314 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_GET(x) \ 315 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_DL_OFDMA) 316 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_SET(x, z) \ 317 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_DL_OFDMA) 318 319 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_S 5 320 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_M 0x1 321 #define WMI_HOST_HE_BF_CONF_UL_OFDMA \ 322 (WMI_HOST_HE_BF_CONF_UL_OFDMA_M << WMI_HOST_HE_BF_CONF_UL_OFDMA_S) 323 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_GET(x) \ 324 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_OFDMA) 325 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_SET(x, z) \ 326 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_OFDMA) 327 328 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_S 6 329 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_M 0x1 330 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO \ 331 (WMI_HOST_HE_BF_CONF_UL_MUMIMO_M << WMI_HOST_HE_BF_CONF_UL_MUMIMO_S) 332 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_GET(x) \ 333 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_MUMIMO) 334 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_SET(x, z) \ 335 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_MUMIMO) 336 337 /* HE or VHT Sounding */ 338 #define WMI_HOST_HE_VHT_SOUNDING_MODE_S 0 339 #define WMI_HOST_HE_VHT_SOUNDING_MODE_M 0x1 340 #define WMI_HOST_HE_VHT_SOUNDING_MODE \ 341 (WMI_HOST_HE_VHT_SOUNDING_MODE_M << WMI_HOST_HE_VHT_SOUNDING_MODE_S) 342 #define WMI_HOST_HE_VHT_SOUNDING_MODE_GET(x) \ 343 WMI_HOST_F_MS(x, WMI_HOST_HE_VHT_SOUNDING_MODE) 344 #define WMI_HOST_HE_VHT_SOUNDING_MODE_SET(x, z) \ 345 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_VHT_SOUNDING_MODE) 346 347 /* SU or MU Sounding */ 348 #define WMI_HOST_SU_MU_SOUNDING_MODE_S 2 349 #define WMI_HOST_SU_MU_SOUNDING_MODE_M 0x1 350 #define WMI_HOST_SU_MU_SOUNDING_MODE \ 351 (WMI_HOST_SU_MU_SOUNDING_MODE_M << \ 352 WMI_HOST_SU_MU_SOUNDING_MODE_S) 353 #define WMI_HOST_SU_MU_SOUNDING_MODE_GET(x) \ 354 WMI_HOST_F_MS(x, WMI_HOST_SU_MU_SOUNDING_MODE) 355 #define WMI_HOST_SU_MU_SOUNDING_MODE_SET(x, z) \ 356 WMI_HOST_F_RMW(x, z, WMI_HOST_SU_MU_SOUNDING_MODE) 357 358 /* Trig or Non-Trig Sounding */ 359 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_S 3 360 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_M 0x1 361 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE \ 362 (WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_M << \ 363 WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_S) 364 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_GET(x) \ 365 WMI_HOST_F_MS(x, WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE) 366 #define WMI_HOST_HE_VHT_SU_MU_SOUNDING_MODE_SET(x, z) \ 367 WMI_HOST_F_RMW(x, z, WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE) 368 369 #ifdef WLAN_FEATURE_11BE 370 /* EHT BF capabilities mask */ 371 #define WMI_HOST_EHT_CONF_SU_BFEE_S 0 372 #define WMI_HOST_EHT_CONF_SU_BFEE_M 0x1 373 #define WMI_HOST_EHT_CONF_SU_BFEE \ 374 (WMI_HOST_EHT_CONF_SU_BFEE_M << WMI_HOST_EHT_CONF_SU_BFEE_S) 375 #define WMI_HOST_EHT_CONF_SU_BFEE_GET(x) \ 376 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_SU_BFEE) 377 #define WMI_HOST_EHT_CONF_SU_BFEE_SET(x, z) \ 378 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_SU_BFEE) 379 380 #define WMI_HOST_EHT_CONF_SU_BFER_S 1 381 #define WMI_HOST_EHT_CONF_SU_BFER_M 0x1 382 #define WMI_HOST_EHT_CONF_SU_BFER \ 383 (WMI_HOST_EHT_CONF_SU_BFER_M << WMI_HOST_EHT_CONF_SU_BFER_S) 384 #define WMI_HOST_EHT_CONF_SU_BFER_GET(x) \ 385 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_SU_BFER) 386 #define WMI_HOST_EHT_CONF_SU_BFER_SET(x, z) \ 387 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_SU_BFER) 388 389 #define WMI_HOST_EHT_CONF_MU_BFEE_S 2 390 #define WMI_HOST_EHT_CONF_MU_BFEE_M 0x1 391 #define WMI_HOST_EHT_CONF_MU_BFEE \ 392 (WMI_HOST_EHT_CONF_MU_BFEE_M << WMI_HOST_EHT_CONF_MU_BFEE_S) 393 #define WMI_HOST_EHT_CONF_MU_BFEE_GET(x) \ 394 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_MU_BFEE) 395 #define WMI_HOST_EHT_CONF_MU_BFEE_SET(x, z) \ 396 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_MU_BFEE) 397 398 #define WMI_HOST_EHT_CONF_MU_BFER_S 3 399 #define WMI_HOST_EHT_CONF_MU_BFER_M 0x1 400 #define WMI_HOST_EHT_CONF_MU_BFER \ 401 (WMI_HOST_EHT_CONF_MU_BFER_M << WMI_HOST_EHT_CONF_MU_BFER_S) 402 #define WMI_HOST_EHT_CONF_MU_BFER_GET(x) \ 403 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_MU_BFER) 404 #define WMI_HOST_EHT_CONF_MU_BFER_SET(x, z) \ 405 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_MU_BFER) 406 407 #define WMI_HOST_EHT_CONF_DL_OFDMA_S 4 408 #define WMI_HOST_EHT_CONF_DL_OFDMA_M 0x1 409 #define WMI_HOST_EHT_CONF_DL_OFDMA \ 410 (WMI_HOST_EHT_CONF_DL_OFDMA_M << WMI_HOST_EHT_CONF_DL_OFDMA_S) 411 #define WMI_HOST_EHT_CONF_DL_OFDMA_GET(x) \ 412 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_DL_OFDMA) 413 #define WMI_HOST_EHT_CONF_DL_OFDMA_SET(x, z) \ 414 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_DL_OFDMA) 415 416 #define WMI_HOST_EHT_CONF_UL_OFDMA_S 5 417 #define WMI_HOST_EHT_CONF_UL_OFDMA_M 0x1 418 #define WMI_HOST_EHT_CONF_UL_OFDMA \ 419 (WMI_HOST_EHT_CONF_UL_OFDMA_M << WMI_HOST_EHT_CONF_UL_OFDMA_S) 420 #define WMI_HOST_EHT_CONF_UL_OFDMA_GET(x) \ 421 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_UL_OFDMA) 422 #define WMI_HOST_EHT_CONF_UL_OFDMA_SET(x, z) \ 423 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_UL_OFDMA) 424 425 #define WMI_HOST_EHT_CONF_UL_MUMIMO_S 6 426 #define WMI_HOST_EHT_CONF_UL_MUMIMO_M 0x1 427 #define WMI_HOST_EHT_CONF_UL_MUMIMO \ 428 (WMI_HOST_EHT_CONF_UL_MUMIMO_M << WMI_HOST_EHT_CONF_UL_MUMIMO_S) 429 #define WMI_HOST_EHT_CONF_UL_MUMIMO_GET(x) \ 430 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_UL_MUMIMO) 431 #define WMI_HOST_EHT_CONF_UL_MUMIMO_SET(x, z) \ 432 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_UL_MUMIMO) 433 434 #define WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_S 7 435 #define WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_M 0x1 436 #define WMI_HOST_EHT_CONF_DL_OFDMA_TXBF \ 437 (WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_M << \ 438 WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_S) 439 #define WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_GET(x) \ 440 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_DL_OFDMA_TXBF) 441 #define WMI_HOST_EHT_CONF_DL_OFDMA_TXBF_SET(x, z) \ 442 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_DL_OFDMA_TXBF) 443 444 #define WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_S 8 445 #define WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_M 0x1 446 #define WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO \ 447 (WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_M << \ 448 WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_S) 449 #define WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_GET(x) \ 450 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO) 451 #define WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO_SET(x, z) \ 452 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_DL_OFDMA_MUMIMO) 453 454 #define WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_S 9 455 #define WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_M 0x1 456 #define WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO \ 457 (WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_M << \ 458 WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_S) 459 #define WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_GET(x) \ 460 WMI_HOST_F_MS(x, WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO) 461 #define WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO_SET(x, z) \ 462 WMI_HOST_F_RMW(x, z, WMI_HOST_EHT_CONF_UL_OFDMA_MUMIMO) 463 464 /* Firmware uses most significant 4 bits to differentiate */ 465 /* some of vdev params between HE and EHT */ 466 #define WMI_HOST_VDEV_PARAM_EHT_MODE 0x10000000 467 #endif 468 469 #define WMI_HOST_TPC_RATE_MAX 160 470 #define WMI_HOST_TPC_TX_NUM_CHAIN 4 471 #define WMI_HOST_RXG_CAL_CHAN_MAX 8 472 #define WMI_HOST_MAX_NUM_CHAINS 8 473 #define WMI_MAX_NUM_OF_RATE_THRESH 4 474 475 #define WMI_HOST_PDEV_MAX_VDEVS 17 476 477 /* for QC98XX only */ 478 /*6 modes (A, HT20, HT40, VHT20, VHT40, VHT80) * 3 reg dommains 479 */ 480 #define WMI_HOST_NUM_CTLS_5G 18 481 /*6 modes (B, G, HT20, HT40, VHT20, VHT40) * 3 reg domains */ 482 #define WMI_HOST_NUM_CTLS_2G 18 483 #define WMI_HOST_NUM_BAND_EDGES_5G 8 484 #define WMI_HOST_NUM_BAND_EDGES_2G 4 485 486 /*Beelinier 5G*/ 487 #define WMI_HOST_NUM_CTLS_5G_11A 9 488 #define WMI_HOST_NUM_BAND_EDGES_5G_11A 25 489 #define WMI_HOST_NUM_CTLS_5G_HT20 24 490 #define WMI_HOST_NUM_BAND_EDGES_5G_HT20 25 491 #define WMI_HOST_NUM_CTLS_5G_HT40 18 492 #define WMI_HOST_NUM_BAND_EDGES_5G_HT40 12 493 #define WMI_HOST_NUM_CTLS_5G_HT80 18 494 #define WMI_HOST_NUM_BAND_EDGES_5G_HT80 6 495 #define WMI_HOST_NUM_CTLS_5G_HT160 9 496 #define WMI_HOST_NUM_BAND_EDGES_5G_HT160 2 497 498 /* Beeliner 2G */ 499 #define WMI_HOST_NUM_CTLS_2G_11B 6 500 #define WMI_HOST_NUM_BAND_EDGES_2G_11B 9 501 #define WMI_HOST_NUM_CTLS_2G_20MHZ 30 502 #define WMI_HOST_NUM_BAND_EDGES_2G_20MHZ 11 503 #define WMI_HOST_NUM_CTLS_2G_40MHZ 18 504 #define WMI_HOST_NUM_BAND_EDGES_2G_40MHZ 6 505 506 /* for QC98XX only */ 507 #define WMI_HOST_TX_NUM_CHAIN 0x3 508 #define WMI_HOST_TPC_REGINDEX_MAX 4 509 #define WMI_HOST_ARRAY_GAIN_NUM_STREAMS 2 510 511 /* AST Index for flow override */ 512 #define WMI_CONFIG_MSDU_AST_INDEX_0 0x0 513 #define WMI_CONFIG_MSDU_AST_INDEX_1 0x1 514 #define WMI_CONFIG_MSDU_AST_INDEX_2 0x2 515 #define WMI_CONFIG_MSDU_AST_INDEX_3 0x3 516 517 #define WMI_MAX_AOA_PHASE_DELTA 31 518 #define WMI_MAX_CHAINS_PHASE 2 519 520 #include "qdf_atomic.h" 521 522 #ifdef BIG_ENDIAN_HOST 523 /* This API is used in copying in elements to WMI message, 524 since WMI message uses multilpes of 4 bytes, This API 525 converts length into multiples of 4 bytes, and performs copy 526 */ 527 #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) do { \ 528 int j; \ 529 u_int32_t *src, *dest; \ 530 src = (u_int32_t *)srcp; \ 531 dest = (u_int32_t *)destp; \ 532 for (j = 0; j < roundup(len, sizeof(u_int32_t))/4; j++) { \ 533 *(dest+j) = qdf_le32_to_cpu(*(src+j)); \ 534 } \ 535 } while (0) 536 #else 537 538 #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) OS_MEMCPY(destp,\ 539 srcp, len) 540 541 #endif 542 543 /** macro to convert MAC address from WMI word format to char array */ 544 #define WMI_HOST_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ 545 (c_macaddr)[0] = ((pwmi_mac_addr)->mac_addr31to0) & 0xff; \ 546 (c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0) >> 8) & 0xff; \ 547 (c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0) >> 16) & 0xff; \ 548 (c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0) >> 24) & 0xff; \ 549 (c_macaddr)[4] = ((pwmi_mac_addr)->mac_addr47to32) & 0xff; \ 550 (c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >> 8) & 0xff; \ 551 } while (0) 552 553 #define TARGET_INIT_STATUS_SUCCESS 0x0 554 #define TARGET_INIT_STATUS_GEN_FAILED 0x1 555 #define TARGET_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) 556 #define TARGET_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) 557 558 #define MAX_ASSOC_IE_LENGTH 1024 559 typedef uint32_t TARGET_INIT_STATUS; 560 561 /** 562 * @brief Opaque handle of wmi structure 563 */ 564 struct wmi_unified; 565 typedef struct wmi_unified *wmi_unified_t; 566 567 typedef void *ol_scn_t; 568 /** 569 * @wmi_event_handler function prototype 570 */ 571 typedef int (*wmi_unified_event_handler)(ol_scn_t scn_handle, 572 uint8_t *event_buf, uint32_t len); 573 574 /** 575 * @WMI_HOST_WLAN_PHY_MODE: Host based enum ID for corresponding in 576 * WLAN_PHY_MODE. This should be consistent with WLAN_PHY_MODE always to avoid 577 * breaking the WMI 578 */ 579 typedef enum { 580 WMI_HOST_MODE_11A = 0, /* 11a Mode */ 581 WMI_HOST_MODE_11G = 1, /* 11b/g Mode */ 582 WMI_HOST_MODE_11B = 2, /* 11b Mode */ 583 WMI_HOST_MODE_11GONLY = 3, /* 11g only Mode */ 584 WMI_HOST_MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 585 WMI_HOST_MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 586 WMI_HOST_MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 587 WMI_HOST_MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 588 WMI_HOST_MODE_11AC_VHT20 = 8, 589 WMI_HOST_MODE_11AC_VHT40 = 9, 590 WMI_HOST_MODE_11AC_VHT80 = 10, 591 WMI_HOST_MODE_11AC_VHT20_2G = 11, 592 WMI_HOST_MODE_11AC_VHT40_2G = 12, 593 WMI_HOST_MODE_11AC_VHT80_2G = 13, 594 WMI_HOST_MODE_11AC_VHT80_80 = 14, 595 WMI_HOST_MODE_11AC_VHT160 = 15, 596 WMI_HOST_MODE_11AX_HE20 = 16, 597 WMI_HOST_MODE_11AX_HE40 = 17, 598 WMI_HOST_MODE_11AX_HE80 = 18, 599 WMI_HOST_MODE_11AX_HE80_80 = 19, 600 WMI_HOST_MODE_11AX_HE160 = 20, 601 WMI_HOST_MODE_11AX_HE20_2G = 21, 602 WMI_HOST_MODE_11AX_HE40_2G = 22, 603 WMI_HOST_MODE_11AX_HE80_2G = 23, 604 #ifdef WLAN_FEATURE_11BE 605 WMI_HOST_MODE_11BE_EHT20 = 24, 606 WMI_HOST_MODE_11BE_EHT40 = 25, 607 WMI_HOST_MODE_11BE_EHT80 = 26, 608 WMI_HOST_MODE_11BE_EHT160 = 28, 609 WMI_HOST_MODE_11BE_EHT320 = 30, 610 WMI_HOST_MODE_11BE_EHT20_2G = 31, 611 WMI_HOST_MODE_11BE_EHT40_2G = 32, 612 #endif 613 WMI_HOST_MODE_UNKNOWN, 614 WMI_HOST_MODE_MAX = WMI_HOST_MODE_UNKNOWN, 615 } WMI_HOST_WLAN_PHY_MODE; 616 617 /* 618 * Needs to be removed and use channel_param based 619 * on how it is processed 620 */ 621 typedef struct { 622 /** primary 20 MHz channel frequency in mhz */ 623 uint32_t mhz; 624 /** Center frequency 1 in MHz*/ 625 uint32_t band_center_freq1; 626 /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ 627 uint32_t band_center_freq2; 628 /** channel info described below */ 629 uint32_t info; 630 /** contains min power, max power, reg power and reg class id. */ 631 uint32_t reg_info_1; 632 /** contains antennamax */ 633 uint32_t reg_info_2; 634 } wmi_host_channel; 635 636 /** 637 * enum WMI_HOST_WLAN_BAND_CAPABILITY: Band capability (2.4 GHz, 5 GHz). Maps to 638 * WLAN_BAND_CAPABILITY used in firmware header file(s). 639 * @WMI_HOST_WLAN_2G_CAPABILITY: 2.4 GHz capable 640 * @WMI_HOST_WLAN_5G_CAPABILITY: 5 GHz capable 641 */ 642 typedef enum { 643 WMI_HOST_WLAN_2G_CAPABILITY = 0x1, 644 WMI_HOST_WLAN_5G_CAPABILITY = 0x2, 645 } WMI_HOST_WLAN_BAND_CAPABILITY; 646 647 /** 648 * enum wmi_host_channel_width: Channel operating width. Maps to 649 * wmi_channel_width used in firmware header file(s). 650 * @WMI_HOST_CHAN_WIDTH_20: 20 MHz channel operating width 651 * @WMI_HOST_CHAN_WIDTH_40: 40 MHz channel operating width 652 * @WMI_HOST_CHAN_WIDTH_80: 80 MHz channel operating width 653 * @WMI_HOST_CHAN_WIDTH_160: 160 MHz channel operating width 654 * @WMI_HOST_CHAN_WIDTH_80P80: 80+80 MHz channel operating width 655 * @WMI_HOST_CHAN_WIDTH_5: 5 MHz channel operating width 656 * @WMI_HOST_CHAN_WIDTH_10: 10 MHz channel operating width 657 * @WMI_HOST_CHAN_WIDTH_165: 165 MHz channel operating width 658 * @WMI_HOST_CHAN_WIDTH_160P160: 160 MHz + 160 MHz channel operating width 659 * @WMI_HOST_CHAN_WIDTH_320: 320 MHz channel operating width 660 */ 661 typedef enum { 662 WMI_HOST_CHAN_WIDTH_20 = 0, 663 WMI_HOST_CHAN_WIDTH_40 = 1, 664 WMI_HOST_CHAN_WIDTH_80 = 2, 665 WMI_HOST_CHAN_WIDTH_160 = 3, 666 WMI_HOST_CHAN_WIDTH_80P80 = 4, 667 WMI_HOST_CHAN_WIDTH_5 = 5, 668 WMI_HOST_CHAN_WIDTH_10 = 6, 669 WMI_HOST_CHAN_WIDTH_165 = 7, 670 WMI_HOST_CHAN_WIDTH_160P160 = 8, 671 WMI_HOST_CHAN_WIDTH_320 = 9, 672 } wmi_host_channel_width; 673 674 #define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1) 675 #define ATH_TXOP_TO_US(v) (v<<5) 676 /* WME stream classes */ 677 #define WMI_HOST_AC_BE 0 /* best effort */ 678 #define WMI_HOST_AC_BK 1 /* background */ 679 #define WMI_HOST_AC_VI 2 /* video */ 680 #define WMI_HOST_AC_VO 3 /* voice */ 681 #define WMI_TID_TO_AC(_tid) (\ 682 (((_tid) == 0) || ((_tid) == 3)) ? WMI_HOST_AC_BE : \ 683 (((_tid) == 1) || ((_tid) == 2)) ? WMI_HOST_AC_BK : \ 684 (((_tid) == 4) || ((_tid) == 5)) ? WMI_HOST_AC_VI : \ 685 WMI_HOST_AC_VO) 686 687 /** 688 * struct channel_param - Channel parameters with all 689 * info required by target. 690 * @chan_id: channel id 691 * @pwr: channel power 692 * @mhz: channel frequency 693 * @half_rate: is half rate 694 * @quarter_rate: is quarter rate 695 * @dfs_set: is dfs channel 696 * @dfs_set_cfreq2: is secondary freq dfs channel 697 * @is_chan_passive: is this passive channel 698 * @allow_ht: HT allowed in chan 699 * @allow_vht: VHT allowed on chan 700 * @set_agile: is agile mode 701 * @allow_he: HE allowed on chan 702 * @psc_channel: 6 ghz preferred scan chan 703 * @nan_disabled: is NAN disabled on @mhz 704 * @allow_eht: EHT allowed on chan 705 * @phy_mode: phymode (vht80 or ht40 or ...) 706 * @cfreq1: centre frequency on primary 707 * @cfreq2: centre frequency on secondary 708 * @maxpower: max power for channel 709 * @minpower: min power for channel 710 * @maxreqpower: Max regulatory power 711 * @antennamac: Max antenna 712 * @reg_class_id: Regulatory class id. 713 * @max_bw_supported: max BW supported 714 */ 715 716 struct channel_param { 717 uint8_t chan_id; 718 uint8_t pwr; 719 uint32_t mhz; 720 uint32_t half_rate:1, 721 quarter_rate:1, 722 dfs_set:1, 723 dfs_set_cfreq2:1, 724 is_chan_passive:1, 725 allow_ht:1, 726 allow_vht:1, 727 set_agile:1, 728 allow_he:1, 729 psc_channel:1, 730 nan_disabled:1, 731 allow_eht:1; 732 uint32_t phy_mode; 733 uint32_t cfreq1; 734 uint32_t cfreq2; 735 int8_t maxpower; 736 int8_t minpower; 737 int8_t maxregpower; 738 uint8_t antennamax; 739 uint8_t reg_class_id; 740 wmi_host_channel_width max_bw_supported; 741 }; 742 743 #ifdef FEATURE_OEM_DATA 744 /** 745 * struct oem_data - oem data to be sent to firmware 746 * @vdev_id: Unique identifier assigned to the vdev 747 * @data_len: len of data 748 * @pdev_id: pdev id to identify the pdev 749 * @pdev_vdev_flag: 0 when vdev is valid, 1 when pdev is valid 750 * @is_host_pdev_id: 1 for host pdev id, 0 otherwise 751 * @data: the pointer to the buffer containing data 752 * @file_name_len: Length of file name 753 * @file_name: Pointer to the buffer containing file name 754 */ 755 struct oem_data { 756 uint8_t vdev_id; 757 size_t data_len; 758 uint8_t pdev_id; 759 bool pdev_vdev_flag; 760 bool is_host_pdev_id; 761 uint8_t *data; 762 uint32_t file_name_len; 763 uint8_t *file_name; 764 }; 765 #endif 766 767 #ifdef MULTI_CLIENT_LL_SUPPORT 768 /** 769 * struct latency_level_data - latency data received in the event from the FW 770 * @vdev_id: The latency level for specified vdev_id 771 * @latency_level: latency level honoured by FW 772 */ 773 struct latency_level_data { 774 uint8_t vdev_id; 775 uint32_t latency_level; 776 }; 777 #endif 778 779 /** 780 * enum nss_chains_band_info - Band info for dynamic nss, chains change feature 781 * @NSS_CHAINS_BAND_2GHZ: 2.4Ghz band 782 * @NSS_CHAINS_BAND_5GHZ: 5Ghz band 783 * @NSS_CHAINS_BAND_MAX: Max bands supported 784 */ 785 enum nss_chains_band_info { 786 NSS_CHAINS_BAND_2GHZ = 0, 787 NSS_CHAINS_BAND_5GHZ, 788 NSS_CHAINS_BAND_MAX, 789 }; 790 791 /** 792 * struct vdev_nss_chains - vdev config of nss, and chains 793 * @num_tx_chains: tx chains of vdev config 794 * @num_rx_chains: rx chains of vdev config 795 * @tx_nss: tx nss of vdev config 796 * @rx_nss: rx nss of vdev config 797 * @num_tx_chains_11b: number of tx chains in 11b mode 798 * @num_tx_chains_11g: number of tx chains in 11g mode 799 * @num_tx_chains_11a: number of tx chains in 11a mode 800 * @disable_rx_mrc: disable 2 rx chains, in rx nss 1 mode 801 * @disable_tx_mrc: disable 2 tx chains, in tx nss 1 mode 802 */ 803 struct vdev_nss_chains { 804 uint32_t num_tx_chains[NSS_CHAINS_BAND_MAX]; 805 uint32_t num_rx_chains[NSS_CHAINS_BAND_MAX]; 806 uint32_t tx_nss[NSS_CHAINS_BAND_MAX]; 807 uint32_t rx_nss[NSS_CHAINS_BAND_MAX]; 808 uint32_t num_tx_chains_11b; 809 uint32_t num_tx_chains_11g; 810 uint32_t num_tx_chains_11a; 811 bool disable_rx_mrc[NSS_CHAINS_BAND_MAX]; 812 bool disable_tx_mrc[NSS_CHAINS_BAND_MAX]; 813 }; 814 815 816 /** 817 * struct peer_delete_params - peer delete cmd parameter 818 * @vdev_id: vdev id 819 */ 820 struct peer_delete_params { 821 uint8_t vdev_id; 822 }; 823 824 /** 825 * struct peer_set_params - peer set cmd parameter 826 * @param_id: parameter id 827 * @param_value: parameter value 828 * @vdev_id: vdev id 829 */ 830 struct peer_set_params { 831 uint32_t param_id; 832 uint32_t param_value; 833 uint32_t vdev_id; 834 }; 835 836 /** 837 * struct peer_create_params - peer create cmd parameter 838 * @peer_addr: peer mac addr 839 * @peer_type: peer type 840 * @vdev_id: vdev id 841 * @mlo_enable: Indicates MLO is enabled 842 */ 843 struct peer_create_params { 844 const uint8_t *peer_addr; 845 uint32_t peer_type; 846 uint32_t vdev_id; 847 #ifdef WLAN_FEATURE_11BE_MLO 848 bool mlo_enabled; 849 #endif 850 }; 851 852 #ifdef WLAN_SUPPORT_PPEDS 853 /** 854 * struct peer_ppe_ds_param - Per peer PPE Direct Switch parameter 855 * @peer_macaddr: PPE mac address 856 * @ppe_routing_enabled: Master flag for PPE routing 857 * @use_ppe: Use PPE command for the peer entry 858 * @service_code: Service code 859 * @priority_valid: If PRI to TID conversion is enabled 860 * @src_info: Source info/PPE port of the interface 861 * @vdev_id: VAP ID 862 */ 863 struct peer_ppe_ds_param { 864 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 865 bool ppe_routing_enabled; 866 bool use_ppe; 867 uint16_t service_code; 868 uint16_t src_info; 869 uint8_t priority_valid; 870 uint8_t vdev_id; 871 }; 872 #endif 873 874 /** 875 * struct peer_remove_params - peer remove cmd parameter 876 * @bssid: bss id 877 * @vdev_id: vdev id 878 * @roam_synch_in_progress: flag to indicate if roaming is in progress 879 */ 880 struct peer_remove_params { 881 uint8_t *bssid; 882 uint8_t vdev_id; 883 bool roam_synch_in_progress; 884 }; 885 886 /** 887 * Stats ID enums defined in host 888 */ 889 typedef enum { 890 WMI_HOST_REQUEST_PEER_STAT = 0x01, 891 WMI_HOST_REQUEST_AP_STAT = 0x02, 892 WMI_HOST_REQUEST_PDEV_STAT = 0x04, 893 WMI_HOST_REQUEST_VDEV_STAT = 0x08, 894 WMI_HOST_REQUEST_BCNFLT_STAT = 0x10, 895 WMI_HOST_REQUEST_VDEV_RATE_STAT = 0x20, 896 WMI_HOST_REQUEST_INST_STAT = 0x40, 897 WMI_HOST_REQUEST_PEER_EXTD_STAT = 0x80, 898 WMI_HOST_REQUEST_VDEV_EXTD_STAT = 0x100, 899 WMI_HOST_REQUEST_NAC_RSSI = 0x200, 900 WMI_HOST_REQUEST_BCN_STAT = 0x800, 901 WMI_HOST_REQUEST_BCN_STAT_RESET = 0x1000, 902 WMI_HOST_REQUEST_PEER_RETRY_STAT = 0x2000, 903 WMI_HOST_REQUEST_PEER_ADV_STATS = 0x4000, 904 WMI_HOST_REQUEST_PMF_BCN_PROTECT_STAT = 0x8000, 905 WMI_HOST_REQUEST_VDEV_PRB_FILS_STAT = 0x10000, 906 WMI_HOST_REQUEST_PDEV_EXTD_STAT = 0x20000, 907 WMI_HOST_REQUEST_PDEV_TELEMETRY_STAT = 0x40000, 908 } wmi_host_stats_id; 909 910 typedef struct { 911 uint16_t cfg_retry_count; 912 uint16_t retry_count; 913 } wmi_host_inst_rssi_args; 914 915 /** 916 * struct stats_request_params - stats_request cmd parameter 917 * @stats_id: Bit mask of all the STATS request are specified with values from wmi_host_stats_id 918 * @vdev_id: vdev id 919 * @pdev_id: pdev_id 920 * @wmi_host_inst_rssi_args: Instantaneous rssi stats args 921 * @is_qmi_send_support: support to send by qmi or not 922 */ 923 struct stats_request_params { 924 uint32_t stats_id; 925 uint8_t vdev_id; 926 uint8_t pdev_id; 927 wmi_host_inst_rssi_args rssi_args; 928 bool is_qmi_send_support; 929 }; 930 931 /** 932 * struct bss_chan_info_request_params - BSS chan info params 933 * @param: parameter value 934 */ 935 struct bss_chan_info_request_params { 936 uint32_t param; 937 }; 938 939 /** 940 * struct wow_cmd_params - wow cmd parameter 941 * @enable: wow enable or disable flag 942 * @can_suspend_link: flag to indicate if link can be suspended 943 * @pause_iface_config: interface config 944 */ 945 struct wow_cmd_params { 946 bool enable; 947 bool can_suspend_link; 948 uint8_t pause_iface_config; 949 uint32_t flags; 950 }; 951 952 /** 953 * struct wow_add_wakeup_params - wow wakeup parameter 954 * @type: param type 955 */ 956 struct wow_add_wakeup_params { 957 uint32_t type; 958 }; 959 960 /** 961 * struct wow_add_wakeup_pattern_params - Add WoW pattern params 962 * @pattern_bytes: pointer to pattern bytes 963 * @mask_bytes: pointer to mask bytes 964 * @pattern_len: pattern length 965 * @pattern_id: pattern id 966 */ 967 struct wow_add_wakeup_pattern_params { 968 uint8_t *pattern_bytes; 969 uint8_t *mask_bytes; 970 uint32_t pattern_len; 971 uint32_t pattern_id; 972 }; 973 974 /** 975 * struct wow_remove_wakeup_pattern params - WoW remove pattern param 976 * @pattern_bytes: pointer to pattern bytes 977 * @mask_bytes: Mask bytes 978 * @pattern_id: pattern identifier 979 */ 980 struct wow_remove_wakeup_pattern_params { 981 uint32_t *pattern_bytes; 982 uint32_t *mask_bytes; 983 uint32_t pattern_id; 984 }; 985 986 987 /** 988 * struct packet_enable_params - packet enable cmd parameter 989 * @vdev_id: vdev id 990 * @enable: flag to indicate if parameter can be enabled or disabled 991 */ 992 struct packet_enable_params { 993 uint8_t vdev_id; 994 bool enable; 995 }; 996 997 /** 998 * struct suspend_params - suspend cmd parameter 999 * @disable_target_intr: disable target interrupt 1000 */ 1001 struct suspend_params { 1002 uint8_t disable_target_intr; 1003 }; 1004 1005 /** 1006 * struct pdev_params - pdev set cmd parameter 1007 * @param_id: parameter id 1008 * @param_value: parameter value 1009 * @is_host_pdev_id: indicate whether pdev_id is host pdev_id or not 1010 */ 1011 struct pdev_params { 1012 uint32_t param_id; 1013 uint32_t param_value; 1014 bool is_host_pdev_id; 1015 }; 1016 1017 /** 1018 * struct bcn_prb_template_params - beacon probe template parameter 1019 * @vdev_id: vdev id 1020 * @buf_len: Template length 1021 * @caps: capabilities field 1022 * @erp: ERP field 1023 */ 1024 struct bcn_prb_template_params { 1025 uint8_t vdev_id; 1026 int buf_len; 1027 uint16_t caps; 1028 uint8_t erp; 1029 }; 1030 1031 #define WMI_MAX_SUPPORTED_RATES 128 1032 /** 1033 * struct target_rate_set - Rate set bitmap 1034 * @num_rate: number of rates in rates bitmap 1035 * @rates: rates (each 8bit value) packed into a 32 bit word. 1036 * the rates are filled from least significant byte to most 1037 * significant byte. 1038 */ 1039 typedef struct { 1040 uint32_t num_rates; 1041 uint32_t rates[(WMI_MAX_SUPPORTED_RATES / 4) + 1]; 1042 } target_rate_set; 1043 1044 1045 #define WMI_HOST_MAX_NUM_SS 8 1046 #define WMI_HOST_MAX_HECAP_PHY_SIZE 3 1047 #define WMI_HOST_MAX_HECAP_MAC_SIZE 2 1048 #define WMI_HOST_HECAP_MAC_WORD1 0 1049 #define WMI_HOST_HECAP_MAC_WORD2 1 1050 #define WMI_HOST_MAX_HE_RATE_SET 3 1051 1052 #define WMI_HOST_HE_INVALID_MCSNSSMAP (0xFFFF) 1053 #define WMI_HOST_HE_TXRX_MCS_NSS_IDX_80 0 1054 #define WMI_HOST_HE_TXRX_MCS_NSS_IDX_160 1 1055 #define WMI_HOST_HE_TXRX_MCS_NSS_IDX_80_80 2 1056 1057 #ifdef WLAN_FEATURE_11BE 1058 #define WMI_HOST_MAX_EHTCAP_PHY_SIZE 3 1059 #define WMI_HOST_MAX_EHTCAP_MAC_SIZE 1 1060 #define WMI_HOST_EHTCAP_MAC_WORD1 0 1061 #define WMI_HOST_EHTCAP_MAC_WORD2 1 1062 #define WMI_HOST_MAX_EHT_RATE_SET 4 1063 1064 #define WMI_HOST_EHT_INVALID_MCSNSSMAP (0xFFFF) 1065 #define WMI_HOST_EHT_TXRX_MCS_NSS_IDX_80 0 1066 #define WMI_HOST_EHT_TXRX_MCS_NSS_IDX_160 1 1067 #define WMI_HOST_EHT_TXRX_MCS_NSS_IDX_320 2 1068 #endif 1069 1070 /** 1071 * struct wmi_host_ppe_threshold -PPE threshold 1072 * @numss_m1: NSS - 1 1073 * @ru_bit_mask: RU bit mask indicating the supported RU's 1074 * @ppet16_ppet8_ru3_ru0: ppet8 and ppet16 for max num ss 1075 */ 1076 struct wmi_host_ppe_threshold { 1077 uint32_t numss_m1; 1078 uint32_t ru_bit_mask; 1079 uint32_t ppet16_ppet8_ru3_ru0[WMI_HOST_MAX_NUM_SS]; 1080 }; 1081 1082 /** 1083 * struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr 1084 * @mac_addr31to0: upper 4 bytes of MAC address 1085 * @mac_addr47to32: lower 2 bytes of MAC address 1086 */ 1087 typedef struct { 1088 uint32_t mac_addr31to0; 1089 uint32_t mac_addr47to32; 1090 } wmi_host_mac_addr; 1091 1092 #ifdef WLAN_FEATURE_11BE 1093 /** 1094 * struct wlan_host_t2lm_of_tids - TID-to-link mapping info 1095 * @direction: 0 - Downlink, 1 - uplink 2 - Both uplink and downlink 1096 * @default_link_mapping: value 1 indicates the default T2LM, where all the TIDs 1097 * are mapped to all the links. 1098 * value 0 indicates the preferred T2LM mapping 1099 * @t2lm_provisioned_links: Indicates TID to link mapping of all the TIDS. 1100 */ 1101 struct wlan_host_t2lm_of_tids { 1102 enum wlan_t2lm_direction direction; 1103 bool default_link_mapping; 1104 uint16_t t2lm_provisioned_links[T2LM_MAX_NUM_TIDS]; 1105 }; 1106 1107 /** 1108 * struct wmi_host_tid_to_link_map_params - TID-to-link mapping params 1109 * @pdev_id: Pdev id 1110 * @peer_macaddr: link peer macaddr 1111 * @num_dir: number of directions for which T2LM info is available 1112 * @t2lm_info: TID-to-link mapping info for the given directions 1113 */ 1114 struct wmi_host_tid_to_link_map_params { 1115 uint8_t pdev_id; 1116 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 1117 uint8_t num_dir; 1118 struct wlan_host_t2lm_of_tids t2lm_info[WLAN_T2LM_MAX_DIRECTION]; 1119 }; 1120 #endif /* WLAN_FEATURE_11BE */ 1121 1122 #ifdef WLAN_FEATURE_11BE_MLO 1123 /** 1124 * struct peer_assoc_mlo_params - MLO assoc params 1125 * @mlo_enabled: indicate is MLO enabled 1126 * @mlo_assoc_link: indicate is the link used to initialize the association 1127 * of mlo connection 1128 * @mlo_primary_umac: indicate is the link on primary UMAC, WIN only flag 1129 * @mlo_logical_link_index_valid: indicate if the logial link index in is valid 1130 * @mlo_peer_id_valid: indicate if the mlo peer id is valid 1131 * @mlo_force_link_inactive: force the peer inactive 1132 * @emlsr_support: indicate if eMLSR supported 1133 * @emlmr_support: indicate if eMLMR supported 1134 * @msd_cap_support: indicate if MSD supported 1135 * @mld_mac: MLD mac address 1136 * @logical_link_index: Unique index for links of the mlo. Starts with Zero 1137 * @ml_peer_id: ML peer id if generated by host. Otherwise invalid peer id 1138 * @ieee_link_id: peer link ID 1139 * @emlsr_pad_delay_us: eMLSR Padding Delay from peer in us 1140 * @emlsr_trans_delay_us: eMLSR Transition Delay from peer in us 1141 * @emlmr_delay_us: eMLMR Delay from peer in us 1142 * @trans_timeout_us: EML Transition Timeout in us 1143 * @medium_sync_duration: medium sync duration in us 1144 * @medium_sync_ofdm_ed_thresh: medium sync ofdm threshold in us 1145 * @medium_sync_max_txop_num: Max number of TXOPs 1146 */ 1147 struct peer_assoc_mlo_params { 1148 uint32_t mlo_enabled:1, 1149 mlo_assoc_link:1, 1150 mlo_primary_umac:1, 1151 mlo_logical_link_index_valid:1, 1152 mlo_peer_id_valid:1, 1153 mlo_force_link_inactive:1, 1154 emlsr_support:1, 1155 emlmr_support:1, 1156 msd_cap_support:1, 1157 unused:23; 1158 uint8_t mld_mac[QDF_MAC_ADDR_SIZE]; 1159 uint32_t logical_link_index; 1160 uint32_t ml_peer_id; 1161 uint32_t ieee_link_id; 1162 uint16_t emlsr_pad_delay_us; 1163 uint16_t emlsr_trans_delay_us; 1164 uint16_t emlmr_delay_us; 1165 uint32_t trans_timeout_us; 1166 uint16_t medium_sync_duration; 1167 uint16_t medium_sync_ofdm_ed_thresh; 1168 uint16_t medium_sync_max_txop_num; 1169 }; 1170 1171 /** 1172 * struct ml_partner_info - partner link info 1173 * @vdev_id: vdev id 1174 * @hw_mld_link_id: unique hw link id across SoCs 1175 */ 1176 struct ml_partner_info { 1177 uint32_t vdev_id; 1178 uint32_t hw_mld_link_id; 1179 }; 1180 1181 /** 1182 * struct peer_assoc_ml_partner_links - ML partner links 1183 * @num_links: Number of links 1184 * @partner_info: Partner link info 1185 */ 1186 struct peer_assoc_ml_partner_links { 1187 uint8_t num_links; 1188 struct ml_partner_info partner_info[WLAN_UMAC_MLO_MAX_VDEVS]; 1189 }; 1190 #endif 1191 /** 1192 * struct peer_assoc_params - peer assoc cmd parameter 1193 * @vdev_id: vdev id 1194 * @peer_new_assoc: peer association type 1195 * @peer_associd: peer association id 1196 * @peer_caps: peer capabalities 1197 * @peer_listen_intval: peer listen interval 1198 * @peer_ht_caps: HT capabalities 1199 * @peer_max_mpdu: 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k 1200 * @peer_mpdu_density: 3 : 0~7 : 2^(11nAMPDUdensity -4) 1201 * @peer_rate_caps: peer rate capabalities 1202 * @peer_nss: peer nss 1203 * @peer_phymode: peer phymode 1204 * @peer_ht_info: peer HT info 1205 * @peer_legacy_rates: peer legacy rates 1206 * @peer_ht_rates: peer ht rates 1207 * @rx_max_rate: max rx rates 1208 * @rx_mcs_set: rx mcs 1209 * @tx_max_rate: max tx rates 1210 * @tx_mcs_set: tx mcs 1211 * @vht_capable: VHT capabalities 1212 * @min_data_rate: Peer minimum rate 1213 * @tx_max_mcs_nss: max tx MCS and NSS 1214 * @peer_bw_rxnss_override: Peer BW RX NSS overridden or not. 1215 * @is_pmf_enabled: PMF enabled 1216 * @is_wme_set: WME enabled 1217 * @qos_flag: QoS Flags 1218 * @apsd_flag: APSD flags 1219 * @ht_flag: HT flags 1220 * @bw_40: 40 capabale 1221 * @bw_80: 80 capabale 1222 * @bw_160: 160 capabale 1223 * @bw_320: 320 capabale 1224 * @stbc_flag: STBC flag 1225 * @ldpc_flag: LDPC flag 1226 * @static_mimops_flag: statis MIMO PS flags 1227 * @dynamic_mimops_flag: Dynamic MIMO PS flags 1228 * @spatial_mux_flag: spatial MUX flags 1229 * @vht_flag: VHT flags 1230 * @vht_ng_flag: VHT on 11N/G flags 1231 * @need_ptk_4_way: Needs 4 way handshake 1232 * @need_gtk_2_way: Needs 2 way GTK 1233 * @auth_flag: Is peer authenticated 1234 * @safe_mode_enabled: Safe enabled for this peer 1235 * @amsdu_disable: AMSDU disble 1236 * @peer_mac: Peer mac address 1237 * @he_flag: HE flags 1238 * @eht_flag: EHT flags 1239 * @twt_requester: TWT Requester Support bit in Extended Capabilities element 1240 * @twt_responder: TWT Responder Support bit in Extended Capabilities element 1241 * @peer_he_cap_macinfo: Peer HE Cap MAC info 1242 * @peer_he_ops: Peer HE operation info 1243 * @peer_he_cap_phyinfo: Peer HE Cap PHY info 1244 * @peer_he_cap_info_internal: Peer HE internal PHY capability info 1245 * @peer_he_caps_6ghz: Peer HE 6GHz Band Capabilities info 1246 * @peer_he_mcs_count: Peer HE MCS TX/RX MAP count 1247 * @peer_he_rx_mcs_set: Peer HE RX MCS MAP 1248 * @peer_he_tx_mcs_set: Peer HE TX MCS MAP 1249 * @peer_eht_cap_macinfo: Peer EHT Cap MAC info 1250 * @peer_eht_ops: Peer EHT operation info 1251 * @peer_eht_cap_phyinfo: Peer EHT Cap PHY info 1252 * @peer_eht_mcs_count: Peer EHT MCS TX/RX MAP count 1253 * @peer_eht_rx_mcs_set: Peer EHT RX MCS MAP 1254 * @peer_eht_tx_mcs_set: Peer EHT TX MCS MAP 1255 * @peer_eht_ppet: Peer EHT PPET info 1256 * @puncture_bitmap: 11be static puncture bitmap 1257 * @peer_ppet: Peer HE PPET info 1258 * @peer_bss_max_idle_option: Peer BSS Max Idle option update 1259 * @akm: AKM info 1260 * @peer_assoc_mlo_params mlo_params: MLO assoc params 1261 * @peer_assoc_ml_partner_links: MLO partner links 1262 * @t2lm_params: TID-to-link mapping params 1263 */ 1264 struct peer_assoc_params { 1265 uint32_t vdev_id; 1266 uint32_t peer_new_assoc; 1267 uint32_t peer_associd; 1268 uint32_t peer_caps; 1269 uint32_t peer_listen_intval; 1270 uint32_t peer_ht_caps; 1271 uint32_t peer_max_mpdu; 1272 uint32_t peer_mpdu_density; 1273 uint32_t peer_rate_caps; 1274 uint32_t peer_nss; 1275 uint32_t peer_vht_caps; 1276 uint32_t peer_phymode; 1277 uint32_t peer_ht_info[2]; 1278 target_rate_set peer_legacy_rates; 1279 target_rate_set peer_ht_rates; 1280 uint32_t rx_max_rate; 1281 uint32_t rx_mcs_set; 1282 uint32_t tx_max_rate; 1283 uint32_t tx_mcs_set; 1284 uint8_t vht_capable; 1285 uint8_t min_data_rate; 1286 uint32_t peer_bw_rxnss_override; 1287 uint32_t tx_max_mcs_nss; 1288 uint32_t is_pmf_enabled:1, 1289 is_wme_set:1, 1290 qos_flag:1, 1291 apsd_flag:1, 1292 ht_flag:1, 1293 bw_40:1, 1294 bw_80:1, 1295 bw_160:1, 1296 #ifdef WLAN_FEATURE_11BE 1297 bw_320:1, 1298 #endif 1299 stbc_flag:1, 1300 ldpc_flag:1, 1301 static_mimops_flag:1, 1302 dynamic_mimops_flag:1, 1303 spatial_mux_flag:1, 1304 vht_flag:1, 1305 vht_ng_flag:1, 1306 need_ptk_4_way:1, 1307 need_gtk_2_way:1, 1308 auth_flag:1, 1309 safe_mode_enabled:1, 1310 amsdu_disable:1, 1311 p2p_capable_sta:1, 1312 inter_bss_peer:1; 1313 /* Use common structure */ 1314 uint8_t peer_mac[QDF_MAC_ADDR_SIZE]; 1315 bool he_flag; 1316 #ifdef WLAN_FEATURE_11BE 1317 bool eht_flag; 1318 #endif 1319 bool twt_requester; 1320 bool twt_responder; 1321 uint32_t peer_he_cap_macinfo[WMI_HOST_MAX_HECAP_MAC_SIZE]; 1322 uint32_t peer_he_ops; 1323 uint32_t peer_he_cap_phyinfo[WMI_HOST_MAX_HECAP_PHY_SIZE]; 1324 uint32_t peer_he_cap_info_internal; 1325 uint32_t peer_he_caps_6ghz; 1326 uint32_t peer_he_mcs_count; 1327 uint32_t peer_he_rx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; 1328 uint32_t peer_he_tx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; 1329 #ifdef WLAN_FEATURE_11BE 1330 uint32_t peer_eht_cap_macinfo[WMI_HOST_MAX_EHTCAP_MAC_SIZE]; 1331 uint32_t peer_eht_ops; 1332 uint32_t peer_eht_cap_phyinfo[WMI_HOST_MAX_EHTCAP_PHY_SIZE]; 1333 uint32_t peer_eht_mcs_count; 1334 uint32_t peer_eht_rx_mcs_set[WMI_HOST_MAX_EHT_RATE_SET]; 1335 uint32_t peer_eht_tx_mcs_set[WMI_HOST_MAX_EHT_RATE_SET]; 1336 struct wmi_host_ppe_threshold peer_eht_ppet; 1337 uint16_t puncture_bitmap; 1338 #endif 1339 struct wmi_host_ppe_threshold peer_ppet; 1340 u_int8_t peer_bsscolor_rept_info; 1341 uint32_t peer_bss_max_idle_option; 1342 uint16_t akm; 1343 #ifdef WLAN_FEATURE_11BE_MLO 1344 struct peer_assoc_mlo_params mlo_params; 1345 struct peer_assoc_ml_partner_links ml_links; 1346 #endif 1347 uint8_t peer_dms_capable:1, 1348 reserved:7; 1349 #ifdef WLAN_FEATURE_11BE 1350 struct wmi_host_tid_to_link_map_params t2lm_params; 1351 #endif 1352 }; 1353 1354 /** 1355 * struct ap_ps_params - ap ps cmd parameter 1356 * @vdev_id: vdev id 1357 * @param: ap ps parameter 1358 * @value: ap ps parameter value 1359 */ 1360 struct ap_ps_params { 1361 uint32_t vdev_id; 1362 uint32_t param; 1363 uint32_t value; 1364 }; 1365 1366 #define WMI_HOST_SCAN_CHAN_FREQ_SHIFT 0 1367 #define WMI_HOST_SCAN_CHAN_FREQ_MASK 0xffff 1368 #define WMI_HOST_SCAN_CHAN_MODE_SHIFT 16 1369 #define WMI_HOST_SCAN_CHAN_MODE_MASK 0xff 1370 1371 #define WMI_HOST_MAX_CHANS_PER_WMI_CMD 58 1372 1373 /** 1374 * struct scan_chan_list_params - scan channel list cmd parameter 1375 * @pdev_id: pdev_id 1376 * @num_chan: no of scan channels 1377 * @nallchans: nall chans 1378 * @append: append to existing chan list 1379 * @max_bw_support_present: max BW support present 1380 * @ch_param: pointer to channel_paramw 1381 */ 1382 struct scan_chan_list_params { 1383 uint32_t pdev_id; 1384 uint16_t nallchans; 1385 bool append; 1386 bool max_bw_support_present; 1387 struct channel_param ch_param[1]; 1388 }; 1389 1390 #ifdef QCA_SUPPORT_AGILE_DFS 1391 /** 1392 * struct vdev_adfs_ch_cfg_params - Agile dfs channel set request params 1393 * @vdev_id: Vdev indentifier 1394 * @ocac_mode: Off Channel CAC mode 1395 * @min_duration_ms: Minimum Off channel CAC duration 1396 * @max_duration_ms: Maximum Off channel CAC duration 1397 * @chan_freq: channel number of precac channel 1398 * @chan_width: Precac Channel width 1399 * @center_freq1: Agile preCAC channel frequency in MHz for 20/40/80/160 1400 * and left center frequency(5690MHz) for restricted 80p80. 1401 * @center_freq2: Second segment Agile frequency if applicable. 0 for 1402 * 20/40/80/160 and right center frequency(5775MHz) for 1403 * restricted 80p80. 1404 */ 1405 struct vdev_adfs_ch_cfg_params { 1406 uint32_t vdev_id; 1407 uint32_t ocac_mode; /* WMI_ADFS_OCAC_MODE */ 1408 uint32_t min_duration_ms; 1409 uint32_t max_duration_ms; 1410 uint32_t chan_freq; 1411 uint32_t chan_width; 1412 uint32_t center_freq1; /* in MHz */ 1413 uint32_t center_freq2; /* in MHz */ 1414 }; 1415 1416 /** 1417 * struct vdev_adfs_ch_cfg_params - Agile dfs ocac abort command to stop precac. 1418 * @vdev_id: Vdev indentifier 1419 */ 1420 struct vdev_adfs_abort_params { 1421 uint32_t vdev_id; 1422 }; 1423 #endif 1424 /** 1425 * struct fw_hang_params - fw hang command parameters 1426 * @type: 0:unused 1: ASSERT, 2:not respond detect command, 3:simulate ep-full 1427 * @delay_time_ms: 0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms) 1428 */ 1429 struct fw_hang_params { 1430 uint32_t type; 1431 uint32_t delay_time_ms; 1432 }; 1433 1434 /** 1435 * struct pdev_utf_params - pdev utf command parameters 1436 * @utf_payload: 1437 * @len: 1438 * @is_ar900b: is it 900b target 1439 */ 1440 struct pdev_utf_params { 1441 uint8_t *utf_payload; 1442 uint32_t len; 1443 bool is_ar900b; 1444 }; 1445 1446 /*Adding this due to dependency on wmi_unified.h 1447 */ 1448 typedef struct { 1449 uint32_t len; 1450 uint32_t msgref; 1451 uint32_t segmentInfo; 1452 } QVIT_SEG_HDR_INFO_STRUCT; 1453 1454 /** 1455 * struct crash_inject - crash inject command parameters 1456 * @type: crash inject type 1457 * @delay_time_ms: time in milliseconds for FW to delay the crash 1458 */ 1459 struct crash_inject { 1460 uint32_t type; 1461 uint32_t delay_time_ms; 1462 }; 1463 1464 /** 1465 * struct dbglog_params - fw deboglog command parameters 1466 * @param: command parameter 1467 * @val: parameter value 1468 * @module_id_bitmap: fixed length module id bitmap 1469 * @bitmap_len: module id bitmap length 1470 * @cfgvalid: cfgvalid 1471 */ 1472 struct dbglog_params { 1473 uint32_t param; 1474 uint32_t val; 1475 uint32_t *module_id_bitmap; 1476 uint32_t bitmap_len; 1477 uint32_t cfgvalid[3]; 1478 }; 1479 1480 /** 1481 * struct seg_hdr_info - header info 1482 * @len: length 1483 * @msgref: message reference 1484 * @segmentInfo: segment info 1485 * @pad: padding 1486 */ 1487 struct seg_hdr_info { 1488 uint32_t len; 1489 uint32_t msgref; 1490 uint32_t segmentInfo; 1491 uint32_t pad; 1492 }; 1493 1494 /** 1495 * struct tx_send_params - TX parameters 1496 * @pwr: Tx frame transmission power 1497 * @mcs_mask: Modulation and coding index mask for transmission 1498 * bit 0 -> CCK 1 Mbps rate is allowed 1499 * bit 1 -> CCK 2 Mbps rate is allowed 1500 * bit 2 -> CCK 5.5 Mbps rate is allowed 1501 * bit 3 -> CCK 11 Mbps rate is allowed 1502 * bit 4 -> OFDM BPSK modulation, 1/2 coding rate is allowed 1503 * bit 5 -> OFDM BPSK modulation, 3/4 coding rate is allowed 1504 * bit 6 -> OFDM QPSK modulation, 1/2 coding rate is allowed 1505 * bit 7 -> OFDM QPSK modulation, 3/4 coding rate is allowed 1506 * bit 8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed 1507 * bit 9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed 1508 * bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed 1509 * bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed 1510 * @nss_mask: Spatial streams permitted 1511 * bit 0: if set, Nss = 1 (non-MIMO) is permitted 1512 * bit 1: if set, Nss = 2 (2x2 MIMO) is permitted 1513 * bit 2: if set, Nss = 3 (3x3 MIMO) is permitted 1514 * bit 3: if set, Nss = 4 (4x4 MIMO) is permitted 1515 * bit 4: if set, Nss = 5 (5x5 MIMO) is permitted 1516 * bit 5: if set, Nss = 6 (6x6 MIMO) is permitted 1517 * bit 6: if set, Nss = 7 (7x7 MIMO) is permitted 1518 * bit 7: if set, Nss = 8 (8x8 MIMO) is permitted 1519 * If no bits are set, target will choose what NSS type to use 1520 * @retry_limit: Maximum number of retries before ACK 1521 * @chain_mask: Chains to be used for transmission 1522 * @bw_mask: Bandwidth to be used for transmission 1523 * bit 0 -> 5MHz 1524 * bit 1 -> 10MHz 1525 * bit 2 -> 20MHz 1526 * bit 3 -> 40MHz 1527 * bit 4 -> 80MHz 1528 * bit 5 -> 160MHz 1529 * bit 6 -> 80_80MHz 1530 * @preamble_type: Preamble types for transmission 1531 * bit 0: if set, OFDM 1532 * bit 1: if set, CCK 1533 * bit 2: if set, HT 1534 * bit 3: if set, VHT 1535 * bit 4: if set, HE 1536 * @frame_type: Data or Management frame 1537 * Data:1 Mgmt:0 1538 * @cfr_enable: flag to enable CFR capture 1539 * 0:disable 1:enable 1540 * @en_beamforming: flag to enable tx beamforming 1541 * 0:disable 1:enable 1542 * @retry_limit_ext: 3 bits of extended retry limit. 1543 * Combined with 4 bits "retry_limit" 1544 * to create 7 bits hw retry count. 1545 * Maximum 127 retries for specific frames. 1546 */ 1547 struct tx_send_params { 1548 uint32_t pwr:8, 1549 mcs_mask:12, 1550 nss_mask:8, 1551 retry_limit:4; 1552 uint32_t chain_mask:8, 1553 bw_mask:7, 1554 preamble_type:5, 1555 frame_type:1, 1556 cfr_enable:1, 1557 en_beamforming:1, 1558 retry_limit_ext:3, 1559 reserved:6; 1560 }; 1561 1562 /** 1563 * struct wmi_mgmt_params - wmi mgmt cmd parameters 1564 * @tx_frame: management tx frame 1565 * @frm_len: frame length 1566 * @vdev_id: vdev id 1567 * @tx_type: type of management frame (determines what callback to use) 1568 * @chanfreq: channel frequency 1569 * @desc_id: descriptor id relyaed back by target 1570 * @pdata: frame data 1571 * @macaddr: macaddr of peer 1572 * @qdf_ctx: qdf context for qdf_nbuf_map 1573 * @tx_param: TX send parameters 1574 * @tx_params_valid: Flag that indicates if TX params are valid 1575 * @use_6mbps: specify whether management frame to transmit should 1576 * @tx_flags: additional configuration flags for mgmt frames 1577 * use 6 Mbps rather than 1 Mbps min rate(for 5GHz band or P2P) 1578 * @peer_rssi: peer RSSI value 1579 * @mlo_link_agnostic: if true, can send on any active link 1580 */ 1581 struct wmi_mgmt_params { 1582 void *tx_frame; 1583 uint16_t frm_len; 1584 uint8_t vdev_id; 1585 uint8_t tx_type; 1586 uint16_t chanfreq; 1587 uint16_t desc_id; 1588 void *pdata; 1589 uint8_t *macaddr; 1590 void *qdf_ctx; 1591 struct tx_send_params tx_param; 1592 bool tx_params_valid; 1593 uint8_t use_6mbps; 1594 uint32_t tx_flags; 1595 int8_t peer_rssi; 1596 uint8_t mlo_link_agnostic; 1597 }; 1598 1599 /** 1600 * struct wmi_offchan_data_tx_params - wmi offchan data tx cmd parameters 1601 * @tx_frame: management tx frame 1602 * @frm_len: frame length 1603 * @vdev_id: vdev id 1604 * @tx_params_valid: Flag that indicates if TX params are valid 1605 * @chanfreq: channel frequency 1606 * @desc_id: descriptor id relyaed back by target 1607 * @pdata: frame data 1608 * @macaddr: macaddr of peer 1609 * @qdf_ctx: qdf context for qdf_nbuf_map 1610 * @tx_param: TX send parameters 1611 */ 1612 struct wmi_offchan_data_tx_params { 1613 void *tx_frame; 1614 uint16_t frm_len; 1615 uint8_t vdev_id; 1616 bool tx_params_valid; 1617 uint16_t chanfreq; 1618 uint16_t desc_id; 1619 void *pdata; 1620 uint8_t *macaddr; 1621 void *qdf_ctx; 1622 struct tx_send_params tx_param; 1623 }; 1624 1625 /** 1626 * struct sta_uapsd_params - uapsd auto trig params 1627 * @wmm_ac: WMM access category from 0 to 3 1628 * @user_priority: User priority to use in trigger frames 1629 * @service_interval: service interval 1630 * @suspend_interval: suspend interval 1631 * @delay_interval: delay interval 1632 */ 1633 struct sta_uapsd_params { 1634 uint32_t wmm_ac; 1635 uint32_t user_priority; 1636 uint32_t service_interval; 1637 uint32_t suspend_interval; 1638 uint32_t delay_interval; 1639 }; 1640 1641 /** 1642 * struct ta_uapsd_trig_params - uapsd trigger parameter 1643 * @vdevid: vdev id 1644 * @peer_addr: peer address 1645 * @num_ac: no of access category 1646 * @auto_triggerparam: trigger parameters 1647 */ 1648 struct sta_uapsd_trig_params { 1649 uint32_t vdevid; 1650 uint8_t peer_addr[QDF_MAC_ADDR_SIZE]; 1651 uint32_t num_ac; 1652 struct sta_uapsd_params *auto_triggerparam; 1653 }; 1654 1655 #define WMI_NUM_AC (4) 1656 #define WMI_MAX_NUM_AC 4 1657 1658 1659 enum wmi_peer_rate_report_cond_phy_type { 1660 WMI_PEER_RATE_REPORT_COND_11B = 0, 1661 WMI_PEER_RATE_REPORT_COND_11A_G, 1662 WMI_PEER_RATE_REPORT_COND_11N, 1663 WMI_PEER_RATE_REPORT_COND_11AC, 1664 WMI_PEER_RATE_REPORT_COND_MAX_NUM 1665 }; 1666 1667 /** 1668 * struct report_rate_delta - peer specific parameters 1669 * @percent: percentage 1670 * @delta_min: rate min delta 1671 */ 1672 struct report_rate_delta { 1673 uint32_t percent; /* in unit of 12.5% */ 1674 uint32_t delta_min; /* in unit of Mbps */ 1675 }; 1676 1677 /** 1678 * struct report_rate_per_phy - per phy report parameters 1679 * @cond_flags: condition flag val 1680 * @delta: rate delta 1681 * @report_rate_threshold: rate threshold 1682 */ 1683 struct report_rate_per_phy { 1684 /* 1685 * PEER_RATE_REPORT_COND_FLAG_DELTA, 1686 * PEER_RATE_REPORT_COND_FLAG_THRESHOLD 1687 * Any of these two conditions or both of 1688 * them can be set. 1689 */ 1690 uint32_t cond_flags; 1691 struct report_rate_delta delta; 1692 /* 1693 * In unit of Mbps. There are at most 4 thresholds 1694 * If the threshold count is less than 4, set zero to 1695 * the one following the last threshold 1696 */ 1697 uint32_t report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH]; 1698 }; 1699 1700 /** 1701 * struct peer_rate_report_params - peer rate report parameters 1702 * @rate_report_enable: enable rate report param 1703 * @backoff_time: backoff time 1704 * @timer_period: timer 1705 * @report_per_phy: report per phy type 1706 */ 1707 struct wmi_peer_rate_report_params { 1708 uint32_t rate_report_enable; 1709 uint32_t backoff_time; /* in unit of msecond */ 1710 uint32_t timer_period; /* in unit of msecond */ 1711 /* 1712 *In the following field, the array index means the phy type, 1713 * please see enum wmi_peer_rate_report_cond_phy_type for detail 1714 */ 1715 struct report_rate_per_phy report_per_phy[ 1716 WMI_PEER_RATE_REPORT_COND_MAX_NUM]; 1717 1718 }; 1719 1720 /** 1721 * enum thermal_mgmt_action_code - thermal mgmt action code 1722 * @THERMAL_MGMT_ACTION_DEFAULT: target chooses what action to take, based 1723 * on its default thermal management policy. 1724 * @THERMAL_MGMT_ACTION_HALT_TRAFFIC: If the temperature rises above 1725 * configured upper thresh degreeC, the target will halt tx. 1726 * @THERMAL_MGMT_ACTION_NOTIFY_HOST: the target will notify the host 1727 * if the temperature either rises above configured upper thresh degreeC or 1728 * falls below lower thresh degreeC. 1729 * @THERMAL_MGMT_ACTION_CHAINSCALING: The target will switch tx chain 1730 * mask from multi chains to single chain if the temperature rises 1731 * above upper thresh degreeC. 1732 * The target will switch tx chainmask back to multi chains if the 1733 * temperature drops below upper_thresh_degreeC. 1734 */ 1735 enum thermal_mgmt_action_code { 1736 THERMAL_MGMT_ACTION_DEFAULT, 1737 THERMAL_MGMT_ACTION_HALT_TRAFFIC, 1738 THERMAL_MGMT_ACTION_NOTIFY_HOST, 1739 THERMAL_MGMT_ACTION_CHAINSCALING, 1740 }; 1741 1742 /** 1743 * struct thermal_cmd_params - thermal command parameters 1744 * @min_temp: minimum temprature 1745 * @max_temp: maximum temprature 1746 * @thermal_enable: thermal enable 1747 * @thermal_action: thermal action code 1748 */ 1749 struct thermal_cmd_params { 1750 uint16_t min_temp; 1751 uint16_t max_temp; 1752 uint8_t thermal_enable; 1753 enum thermal_mgmt_action_code thermal_action; 1754 }; 1755 1756 #define WMI_LRO_IPV4_SEED_ARR_SZ 5 1757 #define WMI_LRO_IPV6_SEED_ARR_SZ 11 1758 1759 /** 1760 * struct wmi_lro_config_cmd_t - set LRO init parameters 1761 * @lro_enable: indicates whether lro is enabled 1762 * @tcp_flag: If the TCP flags from the packet do not match 1763 * the values in this field after masking with TCP flags mask 1764 * below, packet is not LRO eligible 1765 * @tcp_flag_mask: field for comparing the TCP values provided 1766 * above with the TCP flags field in the received packet 1767 * @toeplitz_hash_ipv4: contains seed needed to compute the flow id 1768 * 5-tuple toeplitz hash for ipv4 packets 1769 * @toeplitz_hash_ipv6: contains seed needed to compute the flow id 1770 * 5-tuple toeplitz hash for ipv6 packets 1771 * @pdev_id: radio on which lro hash is configured 1772 */ 1773 struct wmi_lro_config_cmd_t { 1774 uint32_t lro_enable; 1775 uint32_t tcp_flag:9, 1776 tcp_flag_mask:9; 1777 uint32_t toeplitz_hash_ipv4[WMI_LRO_IPV4_SEED_ARR_SZ]; 1778 uint32_t toeplitz_hash_ipv6[WMI_LRO_IPV6_SEED_ARR_SZ]; 1779 uint32_t pdev_id; 1780 }; 1781 1782 /** 1783 * struct wmi_probe_resp_params - send probe response parameters 1784 * @prb_rsp_template_frm: pointer to template probe response template 1785 * @prb_rsp_template_len: length of probe response template 1786 */ 1787 struct wmi_probe_resp_params { 1788 uint8_t *prb_rsp_template_frm; 1789 uint32_t prb_rsp_template_len; 1790 }; 1791 1792 /* struct set_key_params: structure containing 1793 * installation key parameters 1794 * @vdev_id: vdev id 1795 * @key_len: key length 1796 * @key_idx: key index 1797 * @group_key_idx: group key index for VLAN 1798 * @peer_mac: peer mac address 1799 * @key_flags: key flags, 0:pairwise key, 1:group key, 2:static key 1800 * @key_cipher: key cipher based on security mode 1801 * @key_txmic_len: tx mic length 1802 * @key_rxmic_len: rx mic length 1803 * @key_tsc_counter: key tx sc counter 1804 * @key_rsc_counter: key rx sc counter 1805 * @rx_iv: receive IV, applicable only in case of WAPI 1806 * @tx_iv: transmit IV, applicable only in case of WAPI 1807 * @key_data: key data 1808 */ 1809 struct set_key_params { 1810 uint8_t vdev_id; 1811 uint16_t key_len; 1812 uint32_t key_idx; 1813 uint32_t group_key_idx; 1814 uint8_t peer_mac[QDF_MAC_ADDR_SIZE]; 1815 uint32_t key_flags; 1816 uint32_t key_cipher; 1817 uint32_t key_txmic_len; 1818 uint32_t key_rxmic_len; 1819 uint64_t key_tsc_counter; 1820 uint64_t key_rsc_counter; 1821 #if defined(ATH_SUPPORT_WAPI) || defined(FEATURE_WLAN_WAPI) 1822 uint8_t rx_iv[16]; 1823 uint8_t tx_iv[16]; 1824 #endif 1825 uint8_t key_data[WMI_MAC_MAX_KEY_LENGTH]; 1826 }; 1827 1828 /** 1829 * struct scan_mac_oui - oui parameters 1830 * @oui: oui parameters 1831 * @vdev_id: interface id 1832 * @enb_probe_req_sno_randomization: control probe req sequence no randomization 1833 * @ie_allowlist: probe req IE allowlist attrs 1834 */ 1835 struct scan_mac_oui { 1836 uint8_t oui[WMI_WIFI_SCANNING_MAC_OUI_LENGTH]; 1837 uint32_t vdev_id; 1838 bool enb_probe_req_sno_randomization; 1839 struct probe_req_allowlist_attr ie_allowlist; 1840 }; 1841 1842 #define WMI_PASSPOINT_REALM_LEN 256 1843 #define WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM 16 1844 #define WMI_PASSPOINT_PLMN_LEN 3 1845 /** 1846 * struct wifi_passpoint_network_param - passpoint network block 1847 * @id: identifier of this network block 1848 * @realm: null terminated UTF8 encoded realm, 0 if unspecified 1849 * @plmn: mcc/mnc combination as per rules, 0s if unspecified 1850 * @roaming_consortium_ids: roaming consortium ids to match, 0s if unspecified 1851 */ 1852 struct wifi_passpoint_network_param { 1853 uint32_t id; 1854 uint8_t realm[WMI_PASSPOINT_REALM_LEN]; 1855 uint8_t plmn[WMI_PASSPOINT_PLMN_LEN]; 1856 int64_t roaming_consortium_ids[ 1857 WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM]; 1858 }; 1859 1860 /** 1861 * struct wifi_passpoint_req_param - passpoint request 1862 * @request_id: request identifier 1863 * @vdev_id: vdev that is the target of the request 1864 * @num_networks: number of valid entries in @networks 1865 * @networks: passpoint networks 1866 */ 1867 struct wifi_passpoint_req_param { 1868 uint32_t request_id; 1869 uint32_t vdev_id; 1870 uint32_t num_networks; 1871 struct wifi_passpoint_network_param networks[]; 1872 }; 1873 1874 /* struct mobility_domain_info - structure containing 1875 * mobility domain info 1876 * @mdie_present: mobility domain present or not 1877 * @mobility_domain: mobility domain 1878 */ 1879 struct mobility_domain_info { 1880 uint8_t mdie_present; 1881 uint16_t mobility_domain; 1882 }; 1883 1884 /** 1885 * struct wifi_epno_network - enhanced pno network block 1886 * @ssid: ssid 1887 * @rssi_threshold: threshold for considering this SSID as found, required 1888 * granularity for this threshold is 4dBm to 8dBm 1889 * @flags: WIFI_PNO_FLAG_XXX 1890 * @auth_bit_field: auth bit field for matching WPA IE 1891 */ 1892 struct wifi_epno_network_params { 1893 struct wlan_ssid ssid; 1894 int8_t rssi_threshold; 1895 uint8_t flags; 1896 uint8_t auth_bit_field; 1897 }; 1898 1899 /** 1900 * struct wifi_enhanced_pno_params - enhanced pno network params 1901 * @request_id: request id number 1902 * @vdev_id: vdev id 1903 * @min_5ghz_rssi: minimum 5GHz RSSI for a BSSID to be considered 1904 * @min_24ghz_rssi: minimum 2.4GHz RSSI for a BSSID to be considered 1905 * @initial_score_max: maximum score that a network can have before bonuses 1906 * @current_connection_bonus: only report when there is a network's score this 1907 * much higher than the current connection 1908 * @same_network_bonus: score bonus for all n/w with the same network flag 1909 * @secure_bonus: score bonus for networks that are not open 1910 * @band_5ghz_bonus: 5GHz RSSI score bonus (applied to all 5GHz networks) 1911 * @num_networks: number of ssids 1912 * @networks: EPNO networks 1913 */ 1914 struct wifi_enhanced_pno_params { 1915 uint32_t request_id; 1916 uint32_t vdev_id; 1917 uint32_t min_5ghz_rssi; 1918 uint32_t min_24ghz_rssi; 1919 uint32_t initial_score_max; 1920 uint32_t current_connection_bonus; 1921 uint32_t same_network_bonus; 1922 uint32_t secure_bonus; 1923 uint32_t band_5ghz_bonus; 1924 uint32_t num_networks; 1925 struct wifi_epno_network_params networks[]; 1926 }; 1927 1928 enum { 1929 WMI_AP_RX_DATA_OFFLOAD = 0x00, 1930 WMI_STA_RX_DATA_OFFLOAD = 0x01, 1931 }; 1932 1933 /** 1934 * enum extscan_configuration_flags - extscan config flags 1935 * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching 1936 */ 1937 enum wmi_extscan_configuration_flags { 1938 WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001, 1939 }; 1940 1941 /** 1942 * enum extscan_report_events_type - extscan report events type 1943 * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full 1944 * @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan 1945 * @EXTSCAN_REPORT_EVENTS_FULL_RESULTS: forward scan results 1946 * (beacons/probe responses + IEs) 1947 * in real time to HAL, in addition to completion events. 1948 * Note: To keep backward compatibility, 1949 * fire completion events regardless of REPORT_EVENTS_EACH_SCAN. 1950 * @EXTSCAN_REPORT_EVENTS_NO_BATCH: controls batching, 1951 * 0 => batching, 1 => no batching 1952 */ 1953 enum wmi_extscan_report_events_type { 1954 WMI_EXTSCAN_REPORT_EVENTS_BUFFER_FULL = 0x00, 1955 WMI_EXTSCAN_REPORT_EVENTS_EACH_SCAN = 0x01, 1956 WMI_EXTSCAN_REPORT_EVENTS_FULL_RESULTS = 0x02, 1957 WMI_EXTSCAN_REPORT_EVENTS_NO_BATCH = 0x04, 1958 }; 1959 1960 /** 1961 * struct extscan_capabilities_params - ext scan capablities 1962 * @request_id: request_id 1963 * @vdev_id: vdev id 1964 */ 1965 struct extscan_capabilities_params { 1966 uint32_t request_id; 1967 uint8_t vdev_id; 1968 }; 1969 1970 /** 1971 * struct extscan_capabilities_reset_params - ext scan capablities reset 1972 * parameter 1973 * @request_id: request_id 1974 * @vdev_id: vdev id 1975 */ 1976 struct extscan_capabilities_reset_params { 1977 uint32_t request_id; 1978 uint8_t vdev_id; 1979 }; 1980 1981 /** 1982 * struct extscan_bssid_hotlist_reset_params - ext scan hotlist reset parameter 1983 * @request_id: request_id 1984 * @vdev_id: vdev id 1985 */ 1986 struct extscan_bssid_hotlist_reset_params { 1987 uint32_t request_id; 1988 uint8_t vdev_id; 1989 }; 1990 1991 /** 1992 * struct extscan_stop_req_params - ext scan stop parameter 1993 * @request_id: request_id 1994 * @vdev_id: vdev id 1995 */ 1996 struct extscan_stop_req_params { 1997 uint32_t request_id; 1998 uint8_t vdev_id; 1999 }; 2000 2001 /** 2002 * struct ap_threshold_params - ap threshold parameter 2003 * @bssid: mac address 2004 * @low: low threshold 2005 * @high: high threshold 2006 */ 2007 struct ap_threshold_params { 2008 struct qdf_mac_addr bssid; 2009 int32_t low; 2010 int32_t high; 2011 }; 2012 2013 /** 2014 * struct extscan_set_sig_changereq_params - ext scan channel parameter 2015 * @request_id: request_id 2016 * @vdev_id: vdev id 2017 * @rssi_sample_size: Number of samples for averaging RSSI 2018 * @lostap_sample_size: Number of missed samples to confirm AP loss 2019 * @min_breaching: Number of APs breaching threshold required for firmware 2020 * @num_ap: no of scanned ap 2021 * @ap: ap threshold parameter 2022 */ 2023 struct extscan_set_sig_changereq_params { 2024 uint32_t request_id; 2025 uint8_t vdev_id; 2026 uint32_t rssi_sample_size; 2027 uint32_t lostap_sample_size; 2028 uint32_t min_breaching; 2029 uint32_t num_ap; 2030 struct ap_threshold_params ap[WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS]; 2031 }; 2032 2033 /** 2034 * struct extscan_cached_result_params - ext scan cached parameter 2035 * @request_id: request_id 2036 * @vdev_id: vdev id 2037 * @flush: cached results flush 2038 */ 2039 struct extscan_cached_result_params { 2040 uint32_t request_id; 2041 uint8_t vdev_id; 2042 bool flush; 2043 }; 2044 2045 #define WMI_WLAN_EXTSCAN_MAX_CHANNELS 36 2046 #define WMI_WLAN_EXTSCAN_MAX_BUCKETS 16 2047 #define WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS 128 2048 #define WMI_WLAN_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 2049 #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 2050 2051 /** 2052 * struct wifi_scan_channelspec_params - wifi scan channel parameter 2053 * @channel: Frequency in MHz 2054 * @dwell_time_ms: dwell time in milliseconds 2055 * @passive: passive scan 2056 * @channel_class: channel class 2057 */ 2058 struct wifi_scan_channelspec_params { 2059 uint32_t channel; 2060 uint32_t dwell_time_ms; 2061 bool passive; 2062 uint8_t channel_class; 2063 }; 2064 2065 /** 2066 * enum wmi_wifi_band - wifi band 2067 * @WMI_WIFI_BAND_UNSPECIFIED: unspecified band 2068 * @WMI_WIFI_BAND_BG: 2.4 GHz 2069 * @WMI_WIFI_BAND_A: 5 GHz without DFS 2070 * @WMI_WIFI_BAND_ABG: 2.4 GHz + 5 GHz; no DFS 2071 * @WMI_WIFI_BAND_A_DFS_ONLY: 5 GHz DFS only 2072 * @WMI_WIFI_BAND_A_WITH_DFS: 5 GHz with DFS 2073 * @WMI_WIFI_BAND_ABG_WITH_DFS: 2.4 GHz + 5 GHz with DFS 2074 * @WMI_WIFI_BAND_MAX: max range 2075 */ 2076 enum wmi_wifi_band { 2077 WMI_WIFI_BAND_UNSPECIFIED, 2078 WMI_WIFI_BAND_BG = 1, 2079 WMI_WIFI_BAND_A = 2, 2080 WMI_WIFI_BAND_ABG = 3, 2081 WMI_WIFI_BAND_A_DFS_ONLY = 4, 2082 /* 5 is reserved */ 2083 WMI_WIFI_BAND_A_WITH_DFS = 6, 2084 WMI_WIFI_BAND_ABG_WITH_DFS = 7, 2085 /* Keep it last */ 2086 WMI_WIFI_BAND_MAX 2087 }; 2088 2089 /** 2090 * struct wifi_scan_bucket_params - wifi scan bucket spec 2091 * @bucket: bucket identifier 2092 * @band: wifi band 2093 * @period: Desired period, in millisecond; if this is too 2094 * low, the firmware should choose to generate results as fast as 2095 * it can instead of failing the command byte 2096 * for exponential backoff bucket this is the min_period 2097 * @report_events: 0 => normal reporting (reporting rssi history 2098 * only, when rssi history buffer is % full) 2099 * 1 => same as 0 + report a scan completion event after scanning 2100 * this bucket 2101 * 2 => same as 1 + forward scan results 2102 * (beacons/probe responses + IEs) in real time to HAL 2103 * @max_period: if max_period is non zero or different than period, 2104 * then this bucket is an exponential backoff bucket and 2105 * the scan period will grow exponentially as per formula: 2106 * actual_period(N) = period ^ (N/(step_count+1)) to a 2107 * maximum period of max_period 2108 * @exponent: for exponential back off bucket: multiplier: 2109 * new_period = old_period * exponent 2110 * @step_count: for exponential back off bucket, number of scans performed 2111 * at a given period and until the exponent is applied 2112 * @num_channels: channels to scan; these may include DFS channels 2113 * Note that a given channel may appear in multiple buckets 2114 * @min_dwell_time_active: per bucket minimum active dwell time 2115 * @max_dwell_time_active: per bucket maximum active dwell time 2116 * @min_dwell_time_passive: per bucket minimum passive dwell time 2117 * @max_dwell_time_passive: per bucket maximum passive dwell time 2118 * @channels: Channel list 2119 */ 2120 struct wifi_scan_bucket_params { 2121 uint8_t bucket; 2122 enum wmi_wifi_band band; 2123 uint32_t period; 2124 uint32_t report_events; 2125 uint32_t max_period; 2126 uint32_t exponent; 2127 uint32_t step_count; 2128 uint32_t num_channels; 2129 uint32_t min_dwell_time_active; 2130 uint32_t max_dwell_time_active; 2131 uint32_t min_dwell_time_passive; 2132 uint32_t max_dwell_time_passive; 2133 struct wifi_scan_channelspec_params 2134 channels[WMI_WLAN_EXTSCAN_MAX_CHANNELS]; 2135 }; 2136 2137 /** 2138 * struct wifi_scan_cmd_req_params - wifi scan command request params 2139 * @base_period: base timer period 2140 * @max_ap_per_scan: max ap per scan 2141 * @report_threshold_percent: report threshold 2142 * in %, when buffer is this much full, wake up host 2143 * @report_threshold_num_scans: report threshold number of scans 2144 * in number of scans, wake up host after these many scans 2145 * @request_id: request id 2146 * @vdev_id: vdev that is the target of the request 2147 * @num_buckets: number of buckets 2148 * @min_dwell_time_active: per bucket minimum active dwell time 2149 * @max_dwell_time_active: per bucket maximum active dwell time 2150 * @min_dwell_time_passive: per bucket minimum passive dwell time 2151 * @max_dwell_time_passive: per bucket maximum passive dwell time 2152 * @configuration_flags: configuration flags 2153 * @extscan_adaptive_dwell_mode: adaptive dwelltime mode for extscan 2154 * @buckets: buckets array 2155 */ 2156 struct wifi_scan_cmd_req_params { 2157 uint32_t base_period; 2158 uint32_t max_ap_per_scan; 2159 uint32_t report_threshold_percent; 2160 uint32_t report_threshold_num_scans; 2161 uint32_t request_id; 2162 uint8_t vdev_id; 2163 uint32_t num_buckets; 2164 uint32_t min_dwell_time_active; 2165 uint32_t max_dwell_time_active; 2166 uint32_t min_dwell_time_passive; 2167 uint32_t max_dwell_time_passive; 2168 uint32_t configuration_flags; 2169 enum scan_dwelltime_adaptive_mode extscan_adaptive_dwell_mode; 2170 struct wifi_scan_bucket_params buckets[WMI_WLAN_EXTSCAN_MAX_BUCKETS]; 2171 }; 2172 2173 /** 2174 * struct mac_ts_info_tfc - mac ts info parameters 2175 * @burstSizeDefn: burst size 2176 * @reserved: reserved 2177 * @ackPolicy: ack policy 2178 * @psb: psb 2179 * @aggregation: aggregation 2180 * @accessPolicy: access policy 2181 * @direction: direction 2182 * @tsid: direction 2183 * @trafficType: traffic type 2184 */ 2185 struct mac_ts_info_tfc { 2186 #ifndef ANI_LITTLE_BIT_ENDIAN 2187 uint8_t burstSizeDefn:1; 2188 uint8_t reserved:7; 2189 #else 2190 uint8_t reserved:7; 2191 uint8_t burstSizeDefn:1; 2192 #endif 2193 2194 #ifndef ANI_LITTLE_BIT_ENDIAN 2195 uint16_t ackPolicy:2; 2196 uint16_t userPrio:3; 2197 uint16_t psb:1; 2198 uint16_t aggregation:1; 2199 uint16_t accessPolicy:2; 2200 uint16_t direction:2; 2201 uint16_t tsid:4; 2202 uint16_t trafficType:1; 2203 #else 2204 uint16_t trafficType:1; 2205 uint16_t tsid:4; 2206 uint16_t direction:2; 2207 uint16_t accessPolicy:2; 2208 uint16_t aggregation:1; 2209 uint16_t psb:1; 2210 uint16_t userPrio:3; 2211 uint16_t ackPolicy:2; 2212 #endif 2213 } qdf_packed; 2214 2215 /** 2216 * struct mac_ts_info_sch - mac ts info schedule parameters 2217 * @rsvd: reserved 2218 * @schedule: schedule bit 2219 */ 2220 struct mac_ts_info_sch { 2221 #ifndef ANI_LITTLE_BIT_ENDIAN 2222 uint8_t rsvd:7; 2223 uint8_t schedule:1; 2224 #else 2225 uint8_t schedule:1; 2226 uint8_t rsvd:7; 2227 #endif 2228 } qdf_packed; 2229 2230 /** 2231 * struct mac_ts_info_sch - mac ts info schedule parameters 2232 * @traffic: mac tfc parameter 2233 * @schedule: mac schedule parameters 2234 */ 2235 struct mac_ts_info { 2236 struct mac_ts_info_tfc traffic; 2237 struct mac_ts_info_sch schedule; 2238 } qdf_packed; 2239 2240 /** 2241 * struct mac_tspec_ie - mac ts spec 2242 * @type: type 2243 * @length: length 2244 * @tsinfo: tsinfo 2245 * @nomMsduSz: nomMsduSz 2246 * @maxMsduSz: maxMsduSz 2247 * @minSvcInterval: minSvcInterval 2248 * @maxSvcInterval: maxSvcInterval 2249 * @inactInterval: inactInterval 2250 * @suspendInterval: suspendInterval 2251 * @svcStartTime: svcStartTime 2252 * @minDataRate: minDataRate 2253 * @meanDataRate: meanDataRate 2254 * @peakDataRate: peakDataRate 2255 * @maxBurstSz: maxBurstSz 2256 * @delayBound: delayBound 2257 * @minPhyRate: minPhyRate 2258 * @surplusBw: surplusBw 2259 * @mediumTime: mediumTime 2260 */ 2261 struct mac_tspec_ie { 2262 uint8_t type; 2263 uint8_t length; 2264 struct mac_ts_info tsinfo; 2265 uint16_t nomMsduSz; 2266 uint16_t maxMsduSz; 2267 uint32_t minSvcInterval; 2268 uint32_t maxSvcInterval; 2269 uint32_t inactInterval; 2270 uint32_t suspendInterval; 2271 uint32_t svcStartTime; 2272 uint32_t minDataRate; 2273 uint32_t meanDataRate; 2274 uint32_t peakDataRate; 2275 uint32_t maxBurstSz; 2276 uint32_t delayBound; 2277 uint32_t minPhyRate; 2278 uint16_t surplusBw; 2279 uint16_t mediumTime; 2280 } qdf_packed; 2281 2282 /** 2283 * struct add_ts_param - ADDTS related parameters 2284 * @vdev_id: vdev id 2285 * @tspec_idx: TSPEC handle uniquely identifying a TSPEC for a STA in a BSS 2286 * @tspec: tspec value 2287 * @status: QDF status 2288 * @pe_session_id: protocol engine session id 2289 * @tsm_interval: TSM interval period passed from UMAC to WMI 2290 * @set_ric_params: Should RIC parameters be set? 2291 */ 2292 struct add_ts_param { 2293 uint8_t vdev_id; 2294 uint16_t tspec_idx; 2295 struct mac_tspec_ie tspec; 2296 QDF_STATUS status; 2297 uint8_t pe_session_id; 2298 #ifdef FEATURE_WLAN_ESE 2299 uint16_t tsm_interval; 2300 #endif /* FEATURE_WLAN_ESE */ 2301 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 2302 bool set_ric_params; 2303 #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ 2304 }; 2305 2306 /** 2307 * struct delts_req_info - DELTS request parameter 2308 * @tsinfo: ts info 2309 * @tspec: ts spec 2310 * @wmeTspecPresent: wme ts spec flag 2311 * @wsmTspecPresent: wsm ts spec flag 2312 * @lleTspecPresent: lle ts spec flag 2313 */ 2314 struct delts_req_info { 2315 struct mac_ts_info tsinfo; 2316 struct mac_tspec_ie tspec; 2317 uint8_t wmeTspecPresent:1; 2318 uint8_t wsmTspecPresent:1; 2319 uint8_t lleTspecPresent:1; 2320 }; 2321 2322 /** 2323 * struct del_ts_params - DELTS related parameters 2324 * @tspecIdx: TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS 2325 * @bssId: BSSID 2326 * @sessionId: session id 2327 * @userPrio: user priority 2328 * @delTsInfo: DELTS info 2329 * @setRICparams: RIC parameters 2330 */ 2331 struct del_ts_params { 2332 uint16_t tspecIdx; 2333 uint8_t bssId[QDF_MAC_ADDR_SIZE]; 2334 uint8_t sessionId; 2335 uint8_t userPrio; 2336 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 2337 struct delts_req_info delTsInfo; 2338 uint8_t setRICparams; 2339 #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ 2340 }; 2341 2342 /** 2343 * struct ll_stats_clear_params - ll stats clear parameter 2344 * @req_id: request id 2345 * @vdev_id: vdev id 2346 * @stats_clear_mask: stats clear mask 2347 * @stop_req: stop request 2348 * @peer_macaddr: MAC address of the peer for which stats are to be cleared 2349 */ 2350 struct ll_stats_clear_params { 2351 uint32_t req_id; 2352 uint8_t vdev_id; 2353 uint32_t stats_clear_mask; 2354 uint8_t stop_req; 2355 struct qdf_mac_addr peer_macaddr; 2356 }; 2357 2358 /** 2359 * struct ll_stats_set_params - ll stats get parameter 2360 * @req_id: request id 2361 * @mpdu_size_threshold: mpdu size threshold 2362 * @aggressive_statistics_gathering: aggressive_statistics_gathering 2363 */ 2364 struct ll_stats_set_params { 2365 uint32_t req_id; 2366 uint32_t mpdu_size_threshold; 2367 uint32_t aggressive_statistics_gathering; 2368 }; 2369 2370 /** 2371 * struct ll_stats_get_params - ll stats parameter 2372 * @req_id: request id 2373 * @vdev_id: vdev id 2374 * @param_id_mask: param is mask 2375 * @peer_macaddr: MAC address of the peer for which stats are desired 2376 * @is_mlo_req: is the request for mlo vdev 2377 * @vdev_id_bitmap: vdev_id_bitmap of all the connected mlo vdevs 2378 * @mld_macaddr: MLD MAC address 2379 */ 2380 struct ll_stats_get_params { 2381 uint32_t req_id; 2382 uint8_t vdev_id; 2383 uint32_t param_id_mask; 2384 struct qdf_mac_addr peer_macaddr; 2385 #ifdef WLAN_FEATURE_11BE_MLO 2386 bool is_mlo_req; 2387 uint32_t vdev_id_bitmap; 2388 struct qdf_mac_addr mld_macaddr; 2389 #endif 2390 }; 2391 2392 2393 /** 2394 * struct link_status_params - link stats parameter 2395 * @vdev_id: ID of the vdev for which link status is desired 2396 */ 2397 struct link_status_params { 2398 uint8_t vdev_id; 2399 }; 2400 2401 /** 2402 * struct dhcp_stop_ind_params - DHCP Stop indication message 2403 * @msgtype: message type is same as the request type 2404 * @msglen: length of the entire request 2405 * @device_mode: Mode of the device(ex:STA, AP) 2406 * @adapter_macaddr: MAC address of the adapter 2407 * @peer_macaddr: MAC address of the connected peer 2408 */ 2409 struct dhcp_stop_ind_params { 2410 uint16_t msgtype; 2411 uint16_t msglen; 2412 uint8_t device_mode; 2413 struct qdf_mac_addr adapter_macaddr; 2414 struct qdf_mac_addr peer_macaddr; 2415 }; 2416 2417 #define WMI_MAX_FILTER_TEST_DATA_LEN 8 2418 #define WMI_MAX_NUM_MULTICAST_ADDRESS 240 2419 #define WMI_MAX_NUM_FILTERS 20 2420 #define WMI_MAX_NUM_TESTS_PER_FILTER 10 2421 2422 /** 2423 * enum packet_filter_type - packet filter type 2424 * @WMI_RCV_FILTER_TYPE_INVALID: invalid type 2425 * @WMI_RCV_FILTER_TYPE_FILTER_PKT: filter packet type 2426 * @WMI_RCV_FILTER_TYPE_BUFFER_PKT: buffer packet type 2427 * @WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE: max enum size 2428 */ 2429 enum packet_filter_type { 2430 WMI_RCV_FILTER_TYPE_INVALID, 2431 WMI_RCV_FILTER_TYPE_FILTER_PKT, 2432 WMI_RCV_FILTER_TYPE_BUFFER_PKT, 2433 WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE 2434 }; 2435 2436 /** 2437 * enum packet_protocol_type - packet protocol type 2438 * @WMI_FILTER_HDR_TYPE_INVALID: invalid type 2439 * @WMI_FILTER_HDR_TYPE_MAC: mac type 2440 * @WMI_FILTER_HDR_TYPE_ARP: trp type 2441 * @WMI_FILTER_HDR_TYPE_IPV4: ipv4 type 2442 * @WMI_FILTER_HDR_TYPE_IPV6: ipv6 type 2443 * @WMI_FILTER_HDR_TYPE_UDP: udp type 2444 * @WMI_FILTER_HDR_TYPE_MAX: max type 2445 */ 2446 enum packet_protocol_type { 2447 WMI_FILTER_HDR_TYPE_INVALID, 2448 WMI_FILTER_HDR_TYPE_MAC, 2449 WMI_FILTER_HDR_TYPE_ARP, 2450 WMI_FILTER_HDR_TYPE_IPV4, 2451 WMI_FILTER_HDR_TYPE_IPV6, 2452 WMI_FILTER_HDR_TYPE_UDP, 2453 WMI_FILTER_HDR_TYPE_MAX 2454 }; 2455 2456 /** 2457 * enum packet_filter_comp_type - packet filter comparison type 2458 * @WMI_FILTER_CMP_TYPE_INVALID: invalid type 2459 * @WMI_FILTER_CMP_TYPE_EQUAL: type equal 2460 * @WMI_FILTER_CMP_TYPE_MASK_EQUAL: mask equal 2461 * @WMI_FILTER_CMP_TYPE_NOT_EQUAL: type not equal 2462 * @WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL: mask not equal 2463 * @WMI_FILTER_CMP_TYPE_MAX: max type 2464 */ 2465 enum packet_filter_comp_type { 2466 WMI_FILTER_CMP_TYPE_INVALID, 2467 WMI_FILTER_CMP_TYPE_EQUAL, 2468 WMI_FILTER_CMP_TYPE_MASK_EQUAL, 2469 WMI_FILTER_CMP_TYPE_NOT_EQUAL, 2470 WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL, 2471 WMI_FILTER_CMP_TYPE_MAX 2472 }; 2473 2474 /** 2475 * struct rcv_pkt_filter_params - receive packet filter parameters 2476 * @protocolLayer - protocol layer 2477 * @cmpFlag - comparison flag 2478 * @dataLength - data length 2479 * @dataOffset - data offset 2480 * @reserved - resserved 2481 * @compareData - compare data 2482 * @dataMask - data mask 2483 */ 2484 struct rcv_pkt_filter_params { 2485 enum packet_protocol_type protocolLayer; 2486 enum packet_filter_comp_type cmpFlag; 2487 uint16_t dataLength; 2488 uint8_t dataOffset; 2489 uint8_t reserved; 2490 uint8_t compareData[WMI_MAX_FILTER_TEST_DATA_LEN]; 2491 uint8_t dataMask[WMI_MAX_FILTER_TEST_DATA_LEN]; 2492 }; 2493 2494 /** 2495 * struct rcv_pkt_filter_config - receive packet filter info 2496 * @filterId - filter id 2497 * @filterType - filter type 2498 * @numFieldParams - no of fields 2499 * @coalesceTime - reserved parameter 2500 * @self_macaddr - self mac address 2501 * @bssid - Bssid of the connected AP 2502 * @paramsData - data parameter 2503 */ 2504 struct rcv_pkt_filter_config { 2505 uint8_t filterId; 2506 enum packet_filter_type filterType; 2507 uint32_t numFieldParams; 2508 uint32_t coalesceTime; 2509 struct qdf_mac_addr self_macaddr; 2510 struct qdf_mac_addr bssid; 2511 struct rcv_pkt_filter_params paramsData[WMI_MAX_NUM_TESTS_PER_FILTER]; 2512 }; 2513 2514 /** 2515 * struct cfg_action_frm_tb_ppdu_param - action frm in TB PPDU cfg 2516 * @cfg - enable/disable 2517 * @frm_len - length of the frame 2518 * @data - data pointer 2519 */ 2520 struct cfg_action_frm_tb_ppdu_param { 2521 uint32_t cfg; 2522 uint32_t frm_len; 2523 uint8_t *data; 2524 }; 2525 2526 #define WMI_MAX_NUM_FW_SEGMENTS 4 2527 2528 /** 2529 * struct fw_dump_seg_req_param - individual segment details 2530 * @seg_id - segment id. 2531 * @seg_start_addr_lo - lower address of the segment. 2532 * @seg_start_addr_hi - higher address of the segment. 2533 * @seg_length - length of the segment. 2534 * @dst_addr_lo - lower address of the destination buffer. 2535 * @dst_addr_hi - higher address of the destination buffer. 2536 * 2537 * This structure carries the information to firmware about the 2538 * individual segments. This structure is part of firmware memory 2539 * dump request. 2540 */ 2541 struct fw_dump_seg_req_param { 2542 uint8_t seg_id; 2543 uint32_t seg_start_addr_lo; 2544 uint32_t seg_start_addr_hi; 2545 uint32_t seg_length; 2546 uint32_t dst_addr_lo; 2547 uint32_t dst_addr_hi; 2548 }; 2549 2550 /** 2551 * struct fw_dump_req_param - firmware memory dump request details. 2552 * @request_id - request id. 2553 * @num_seg - requested number of segments. 2554 * @fw_dump_seg_req - individual segment information. 2555 * 2556 * This structure carries information about the firmware 2557 * memory dump request. 2558 */ 2559 struct fw_dump_req_param { 2560 uint32_t request_id; 2561 uint32_t num_seg; 2562 struct fw_dump_seg_req_param segment[WMI_MAX_NUM_FW_SEGMENTS]; 2563 }; 2564 2565 /** 2566 * struct dhcp_offload_info_params - dhcp offload parameters 2567 * @vdev_id: request data length 2568 * @dhcp_offload_enabled: dhcp offload enabled 2569 * @dhcp_client_num: dhcp client no 2570 * @dhcp_srv_addr: dhcp server ip 2571 */ 2572 struct dhcp_offload_info_params { 2573 uint32_t vdev_id; 2574 bool dhcp_offload_enabled; 2575 uint32_t dhcp_client_num; 2576 uint32_t dhcp_srv_addr; 2577 }; 2578 2579 /** 2580 * struct app_type2_params - app type2parameter 2581 * @vdev_id: vdev id 2582 * @rc4_key: rc4 key 2583 * @rc4_key_len: rc4 key length 2584 * @ip_id: NC id 2585 * @ip_device_ip: NC IP address 2586 * @ip_server_ip: Push server IP address 2587 * @tcp_src_port: NC TCP port 2588 * @tcp_dst_port: Push server TCP port 2589 * @tcp_seq: tcp sequence 2590 * @tcp_ack_seq: tcp ack sequence 2591 * @keepalive_init: Initial ping interval 2592 * @keepalive_min: Minimum ping interval 2593 * @keepalive_max: Maximum ping interval 2594 * @keepalive_inc: Increment of ping interval 2595 * @gateway_mac: gateway mac address 2596 * @tcp_tx_timeout_val: tcp tx timeout value 2597 * @tcp_rx_timeout_val: tcp rx timeout value 2598 */ 2599 struct app_type2_params { 2600 uint8_t vdev_id; 2601 uint8_t rc4_key[16]; 2602 uint32_t rc4_key_len; 2603 /** ip header parameter */ 2604 uint32_t ip_id; 2605 uint32_t ip_device_ip; 2606 uint32_t ip_server_ip; 2607 /** tcp header parameter */ 2608 uint16_t tcp_src_port; 2609 uint16_t tcp_dst_port; 2610 uint32_t tcp_seq; 2611 uint32_t tcp_ack_seq; 2612 uint32_t keepalive_init; 2613 uint32_t keepalive_min; 2614 uint32_t keepalive_max; 2615 uint32_t keepalive_inc; 2616 struct qdf_mac_addr gateway_mac; 2617 uint32_t tcp_tx_timeout_val; 2618 uint32_t tcp_rx_timeout_val; 2619 }; 2620 2621 /** 2622 * struct app_type1_params - app type1 parameter 2623 * @vdev_id: vdev id 2624 * @wakee_mac_addr: mac address 2625 * @identification_id: identification id 2626 * @password: password 2627 * @id_length: id length 2628 * @pass_length: password length 2629 */ 2630 struct app_type1_params { 2631 uint8_t vdev_id; 2632 struct qdf_mac_addr wakee_mac_addr; 2633 uint8_t identification_id[8]; 2634 uint8_t password[16]; 2635 uint32_t id_length; 2636 uint32_t pass_length; 2637 }; 2638 2639 /** 2640 * enum wmi_ext_wow_type - wow type 2641 * @WMI_EXT_WOW_TYPE_APP_TYPE1: only enable wakeup for app type1 2642 * @WMI_EXT_WOW_TYPE_APP_TYPE2: only enable wakeup for app type2 2643 * @WMI_EXT_WOW_TYPE_APP_TYPE1_2: enable wakeup for app type1&2 2644 */ 2645 enum wmi_ext_wow_type { 2646 WMI_EXT_WOW_TYPE_APP_TYPE1, 2647 WMI_EXT_WOW_TYPE_APP_TYPE2, 2648 WMI_EXT_WOW_TYPE_APP_TYPE1_2, 2649 }; 2650 2651 /** 2652 * struct ext_wow_params - ext wow parameters 2653 * @vdev_id: vdev id 2654 * @type: wow type 2655 * @wakeup_pin_num: wake up gpio no 2656 */ 2657 struct ext_wow_params { 2658 uint8_t vdev_id; 2659 enum wmi_ext_wow_type type; 2660 uint32_t wakeup_pin_num; 2661 }; 2662 2663 /** 2664 * struct stats_ext_params - ext stats request 2665 * @vdev_id: vdev id 2666 * @request_data_len: request data length 2667 * @vdev_id_bitmap: mlo connected vdev id bitmap 2668 * @request_data: request data 2669 */ 2670 struct stats_ext_params { 2671 uint32_t vdev_id; 2672 uint32_t request_data_len; 2673 uint32_t vdev_id_bitmap; 2674 uint8_t request_data[]; 2675 }; 2676 2677 #define WMI_GTK_OFFLOAD_KEK_BYTES 64 2678 #define WMI_GTK_OFFLOAD_KCK_BYTES 16 2679 #define WMI_GTK_OFFLOAD_ENABLE 0 2680 #define WMI_GTK_OFFLOAD_DISABLE 1 2681 2682 #define MAX_MEM_CHUNKS 32 2683 /** 2684 * struct wmi_host_mem_chunk - host memory chunk structure 2685 * @vaddr: Pointer to virtual address 2686 * @paddr: Physical address 2687 * @memctx: qdf memory context for mapped address. 2688 * @len: length of chunk 2689 * @req_id: request id from target 2690 */ 2691 struct wmi_host_mem_chunk { 2692 uint32_t *vaddr; 2693 qdf_dma_addr_t paddr; 2694 qdf_dma_mem_context(memctx); 2695 uint32_t len; 2696 uint32_t req_id; 2697 }; 2698 2699 /** 2700 * struct wmi_wifi_start_log - Structure to store the params sent to start/ 2701 * stop logging 2702 * @name: Attribute which indicates the type of logging like per packet 2703 * statistics, connectivity etc. 2704 * @verbose_level: Verbose level which can be 0,1,2,3 2705 * @flag: Flag field for future use 2706 */ 2707 struct wmi_wifi_start_log { 2708 uint32_t ring_id; 2709 uint32_t verbose_level; 2710 uint32_t flag; 2711 }; 2712 2713 /** 2714 * struct wmi_pcl_list - Format of PCL 2715 * @pcl_list: List of preferred channels 2716 * @weight_list: Weights of the PCL 2717 * @pcl_len: Number of channels in the PCL 2718 */ 2719 struct wmi_pcl_list { 2720 uint8_t pcl_list[NUM_CHANNELS]; 2721 uint8_t weight_list[NUM_CHANNELS]; 2722 uint32_t pcl_len; 2723 }; 2724 2725 /** 2726 * struct wmi_hw_mode_params - HW mode params 2727 * @mac0_tx_ss: MAC0 Tx spatial stream 2728 * @mac0_rx_ss: MAC0 Rx spatial stream 2729 * @mac1_tx_ss: MAC1 Tx spatial stream 2730 * @mac1_rx_ss: MAC1 Rx spatial stream 2731 * @mac0_bw: MAC0 bandwidth 2732 * @mac1_bw: MAC1 bandwidth 2733 * @dbs_cap: DBS capabality 2734 * @agile_dfs_cap: Agile DFS capabality 2735 */ 2736 struct wmi_hw_mode_params { 2737 uint8_t mac0_tx_ss; 2738 uint8_t mac0_rx_ss; 2739 uint8_t mac1_tx_ss; 2740 uint8_t mac1_rx_ss; 2741 uint8_t mac0_bw; 2742 uint8_t mac1_bw; 2743 uint8_t dbs_cap; 2744 uint8_t agile_dfs_cap; 2745 }; 2746 2747 /** 2748 * struct wmi_unit_test_cmd - unit test command parameters 2749 * @vdev_id: vdev id 2750 * @module_id: module id 2751 * @num_args: number of arguments 2752 * @diag_token: dialog token, which identifies the transaction. 2753 * this number is generated by wifitool and may be used to 2754 * identify the transaction in the event path 2755 * @args: arguments 2756 */ 2757 struct wmi_unit_test_cmd { 2758 uint32_t vdev_id; 2759 uint32_t module_id; 2760 uint32_t num_args; 2761 uint32_t diag_token; 2762 uint32_t args[WMI_UNIT_TEST_MAX_NUM_ARGS]; 2763 }; 2764 2765 /** 2766 * struct extscan_bssid_hotlist_set_params - set hotlist request 2767 * @request_id: request_id 2768 * @vdev_id: vdev id 2769 * @lost_ap_sample_size: number of samples to confirm AP loss 2770 * @num_ap: Number of hotlist APs 2771 * @ap: hotlist APs 2772 */ 2773 struct extscan_bssid_hotlist_set_params { 2774 uint32_t request_id; 2775 uint8_t vdev_id; 2776 uint32_t lost_ap_sample_size; 2777 uint32_t num_ap; 2778 struct ap_threshold_params ap[WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS]; 2779 }; 2780 2781 /** 2782 * struct host_mem_req - Host memory request paramseters request by target 2783 * @req_id: Request id to identify the request. 2784 * @unit_size: Size of single unit requested. 2785 * @num_unit_info: Memory chunk info 2786 * @num_units: number of units requested. 2787 * @tgt_num_units: number of units request by target. 2788 */ 2789 typedef struct { 2790 uint32_t req_id; 2791 uint32_t unit_size; 2792 uint32_t num_unit_info; 2793 uint32_t num_units; 2794 uint32_t tgt_num_units; 2795 } host_mem_req; 2796 2797 #define WMI_HOST_DSCP_MAP_MAX (64) 2798 2799 /** 2800 * struct wmi_host_ext_resource_config - Extended resource config 2801 * @host_platform_config: Host plaform configuration. 2802 * @fw_featuew_bitmap: FW feature requested bitmap. 2803 */ 2804 typedef struct { 2805 uint32_t host_platform_config; 2806 2807 #define WMI_HOST_FW_FEATURE_LTEU_SUPPORT 0x0001 2808 #define WMI_HOST_FW_FEATURE_COEX_GPIO_SUPPORT 0x0002 2809 #define WMI_HOST_FW_FEATURE_AUX_RADIO_SPECTRAL_INTF 0x0004 2810 #define WMI_HOST_FW_FEATURE_AUX_RADIO_CHAN_LOAD_INTF 0x0008 2811 #define WMI_HOST_FW_FEATURE_BSS_CHANNEL_INFO_64 0x0010 2812 #define WMI_HOST_FW_FEATURE_PEER_STATS 0x0020 2813 #define WMI_HOST_FW_FEATURE_VDEV_STATS 0x0040 2814 #define WMI_HOST_FW_FEATURE_VOW_FEATURES 0x00004000 2815 #define WMI_HOST_FW_FEATURE_VOW_STATS 0x00008000 2816 /** 2817 * @brief fw_feature_bitmask - Enable/Disable features in FW 2818 * @details 2819 * The bits in fw_feature_bitmask are used as shown by the masks below: 2820 * 0x0001 - LTEU Config enable/disable 2821 * 0x0002 - COEX GPIO Config enable/disable 2822 * 0x0004 - Aux Radio enhancement for spectral scan enable/disable 2823 * 0x0008 - Aux Radio enhancement for chan load scan enable/disable 2824 * 0x0010 - BSS channel info stats enable/disable 2825 * The features in question are enabled by setting 2826 * the feature's bit to 1, 2827 * or disabled by setting the feature's bit to 0. 2828 */ 2829 uint32_t fw_feature_bitmap; 2830 2831 /* WLAN priority GPIO number 2832 * The target uses a GPIO pin to indicate when it is transmitting 2833 * high-priority traffic (e.g. beacon, management, or AC_VI) or 2834 * low-priority traffic (e.g. AC_BE, AC_BK). The HW uses this 2835 * WLAN GPIO pin to determine whether to abort WLAN tx in favor of 2836 * BT activity. 2837 * Which GPIO is used for this WLAN tx traffic priority specification 2838 * varies between platforms, so the host needs to indicate to the 2839 * target which GPIO to use. 2840 */ 2841 uint32_t wlan_priority_gpio; 2842 2843 /* Host will notify target which coex algorithm has to be 2844 * enabled based on HW, FW capability and device tree config. 2845 * Till now the coex algorithms were target specific. Now the 2846 * same target can choose between multiple coex algorithms 2847 * depending on device tree config on host. For backward 2848 * compatibility, version support will have option 0 and will 2849 * rely on FW compile time flags to decide the coex version 2850 * between VERSION_1, VERSION_2 and VERSION_3. Version info is 2851 * mandatory from VERSION_4 onwards for any new coex algorithms. 2852 * 2853 * 0 = no version support 2854 * 1 = COEX_VERSION_1 (3 wire coex) 2855 * 2 = COEX_VERSION_2 (2.5 wire coex) 2856 * 3 = COEX_VERSION_3 (2.5 wire coex+duty cycle) 2857 * 4 = COEX_VERSION_4 (4 wire coex) 2858 */ 2859 uint32_t coex_version; 2860 2861 /* There are multiple coex implementations on FW to support different 2862 * hardwares. Since the coex algos are mutually exclusive, host will 2863 * use below fields to send GPIO info to FW and these GPIO pins will 2864 * have different usages depending on the feature enabled. This is to 2865 * avoid adding multiple GPIO fields here for different features. 2866 * 2867 * COEX VERSION_4 (4 wire coex) : 2868 * 4 wire coex feature uses 1 common input request line from BT/ZB/ 2869 * Thread which interrupts the WLAN target processor directly, 1 input 2870 * priority line from BT and ZB each, 1 output line to grant access to 2871 * requesting IOT subsystem. WLAN uses the input priority line to 2872 * identify the requesting IOT subsystem. Request is granted based on 2873 * IOT interface priority and WLAN traffic. GPIO pin usage is as below: 2874 * coex_gpio_pin_1 = BT PRIORITY INPUT GPIO 2875 * coex_gpio_pin_2 = ZIGBEE PRIORITY INPUT GPIO 2876 * coex_gpio_pin_3 = GRANT OUTPUT GPIO 2877 * when a BT active interrupt is raised, WLAN reads 2878 * BT and ZB priority input GPIO pins to compare against the coex 2879 * priority table and accordingly sets the grant output GPIO to give 2880 * access to requesting IOT subsystem. 2881 */ 2882 uint32_t coex_gpio_pin_1; 2883 uint32_t coex_gpio_pin_2; 2884 uint32_t coex_gpio_pin_3; 2885 2886 /* add new members here */ 2887 } wmi_host_ext_resource_config; 2888 2889 /** 2890 * struct set_fwtest_params - FW test params 2891 * @arg: FW param id 2892 * @value: value 2893 */ 2894 struct set_fwtest_params { 2895 uint32_t arg; 2896 uint32_t value; 2897 }; 2898 2899 /** 2900 * enum wfa_test_cmds - WFA test config command 2901 * @WFA_CONFIG_RXNE: configure an override for the RSNXE Used 2902 * @WFA_CONFIG_CSA: configure the driver to ignore CSA 2903 * @WFA_CONFIG_OCV: configure OCI 2904 * @WFA_CONFIG_SA_QUERY: configure driver/firmware to ignore SAquery timeout 2905 * @WFA_FILS_DISCV_FRAMES: FD frames TX enable disable config 2906 * @WFA_IGNORE_H2E_RSNXE: configure driver/firmware to ignore H2E_RSNXE in case 2907 * of 6g connection 2908 */ 2909 enum wfa_test_cmds { 2910 WFA_CONFIG_RXNE, 2911 WFA_CONFIG_CSA, 2912 WFA_CONFIG_OCV, 2913 WFA_CONFIG_SA_QUERY, 2914 WFA_FILS_DISCV_FRAMES, 2915 WFA_IGNORE_H2E_RSNXE, 2916 }; 2917 2918 /** 2919 * enum wmi_host_wfa_config_ocv_frmtype - OCI override frame type 2920 * @WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_SAQUERY_REQ: SA Query Request frame 2921 * @WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_SAQUERY_RSP: SA Query Response frame 2922 * @WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_FT_REASSOC_REQ: FT Reassociation Req frm 2923 * @WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_FILS_REASSOC_REQ: FILS Reassoc Req frm 2924 */ 2925 enum wmi_host_wfa_config_ocv_frmtype { 2926 WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_SAQUERY_REQ = 0x00000001, 2927 WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_SAQUERY_RSP = 0x00000002, 2928 WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_FT_REASSOC_REQ = 0x00000004, 2929 WMI_HOST_WFA_CONFIG_OCV_FRMTYPE_FILS_REASSOC_REQ = 0x00000008, 2930 }; 2931 2932 /** 2933 * struct ocv_wfatest_params - ocv WFA test params 2934 * @frame_type: frame type req for OCV config 2935 * @freq: frequency to set 2936 */ 2937 struct ocv_wfatest_params { 2938 uint8_t frame_type; 2939 uint32_t freq; 2940 }; 2941 2942 /** 2943 * struct set_wfatest_params - WFA test params 2944 * @vdev_id: vdev id 2945 * @value: wfa test config value 2946 * @cmd: WFA test command 2947 * @ocv_param: pointer to ocv params 2948 */ 2949 struct set_wfatest_params { 2950 uint8_t vdev_id; 2951 uint32_t value; 2952 enum wfa_test_cmds cmd; 2953 struct ocv_wfatest_params *ocv_param; 2954 }; 2955 2956 /* 2957 * msduq_update_params - MSDUQ update param structure 2958 * @tid_num: TID number 2959 * @msduq_update_mask: update bit mask 2960 * @qdepth_thresh_value: threshold value for the queue depth 2961 */ 2962 2963 #define QDEPTH_THRESH_MAX_UPDATES 1 2964 2965 typedef struct { 2966 uint32_t tid_num; 2967 uint32_t msduq_update_mask; 2968 uint32_t qdepth_thresh_value; 2969 } msduq_update_params; 2970 2971 /** 2972 * struct set_qdepth_thresh_params - MSDU Queue Depth Threshold Params 2973 * @vdev_id: vdev id 2974 * @pdev_id: pdev id 2975 * @mac_addr: MAC address 2976 * @num_of_msduq_updates: holds the number of tid updates 2977 */ 2978 2979 struct set_qdepth_thresh_params { 2980 uint32_t pdev_id; 2981 uint32_t vdev_id; 2982 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 2983 uint32_t num_of_msduq_updates; 2984 msduq_update_params update_params[QDEPTH_THRESH_MAX_UPDATES]; 2985 }; 2986 2987 /** 2988 * struct peer_chan_width_switch_info - Peer channel width capability params 2989 * @mac_addr: MAC address of peer 2990 * @chan_width: Max supported channel width of peer 2991 * (enum ieee80211_cwm_width) 2992 * @puncture_bitmap: Puncture bitmap of peer 2993 */ 2994 2995 struct peer_chan_width_switch_info { 2996 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 2997 uint32_t chan_width; 2998 uint16_t puncture_bitmap; 2999 }; 3000 3001 /** 3002 * struct set_bridge_mac_addr_params - set bridge MAC addr params 3003 * @dest_addr: Pointer to bridge macaddr 3004 */ 3005 struct set_bridge_mac_addr_params { 3006 uint8_t *bridge_addr; 3007 }; 3008 3009 /** 3010 * struct peer_del_all_wds_entries_params - WDS peer entries del params 3011 * @wds_macaddr: Pointer to destination macaddr 3012 * @peer_macaddr: Pointer to peer mac addr 3013 * @flags: flags 3014 */ 3015 struct peer_del_all_wds_entries_params { 3016 uint8_t *wds_macaddr; 3017 uint8_t *peer_macaddr; 3018 uint32_t flags; 3019 }; 3020 3021 /** 3022 * struct set_ps_mode_params - PS mode params 3023 * @vdev_id: vdev id 3024 * @psmode: PS mode 3025 */ 3026 struct set_ps_mode_params { 3027 uint8_t vdev_id; 3028 uint8_t psmode; 3029 }; 3030 3031 /** 3032 * @struct tt_level_config - Set Thermal throttlling config 3033 * @tmplwm: Temperature low water mark 3034 * @tmphwm: Temperature high water mark 3035 * @dcoffpercent: dc off percentage 3036 * @priority: priority 3037 */ 3038 typedef struct { 3039 uint32_t tmplwm; 3040 uint32_t tmphwm; 3041 uint32_t dcoffpercent; 3042 uint32_t priority; 3043 } tt_level_config; 3044 3045 /** 3046 * struct thermal_mitigation_params - Thermal mitigation params 3047 * @enable: Enable/Disable Thermal mitigation 3048 * @dc: DC 3049 * @dc_per_event: DC per event 3050 * @num_thermal_conf: Number of thermal configurations to be sent 3051 * @client_id: Thermal client id either apps or wpps 3052 * @priority: Priority of apps/wpps 3053 * @tt_level_config: TT level config params 3054 */ 3055 struct thermal_mitigation_params { 3056 uint32_t pdev_id; 3057 uint32_t enable; 3058 uint32_t dc; 3059 uint32_t dc_per_event; 3060 uint8_t num_thermal_conf; 3061 uint8_t client_id; 3062 uint8_t priority; 3063 tt_level_config levelconf[THERMAL_LEVELS]; 3064 }; 3065 3066 /** 3067 * struct smart_ant_enable_tx_feedback_params - SA tx feeback params 3068 * @enable: Enable TX feedback for SA 3069 */ 3070 struct smart_ant_enable_tx_feedback_params { 3071 int enable; 3072 }; 3073 3074 /** 3075 * struct vdev_spectral_configure_params - SPectral config params 3076 * @vdev_id: VDEV id 3077 * @count: count 3078 * @period: period 3079 * @fft_recap: FFT recapture enable/disable 3080 * @spectral_pri: Spectral priority 3081 * @fft_size: FFT size 3082 * @gc_enable: GC enable 3083 * @restart_enable: restart enabled 3084 * @noise_floor_ref: Noise floor reference 3085 * @init_delay: Init delays 3086 * @nb_tone_thr: NB tone threshold 3087 * @str_bin_thr: STR BIN threshold 3088 * @wb_rpt_mode: WB BIN threshold 3089 * @rssi_rpt_mode: RSSI report mode 3090 * @rssi_thr: RSSI threshold 3091 * @pwr_format: Power format 3092 * @rpt_mode: Report mdoe 3093 * @bin_scale: BIN scale 3094 * @dbm_adj: DBM adjust 3095 * @chn_mask: chain mask 3096 * @mode: Mode 3097 * @center_freq1: Center frequency 1 3098 * @center_freq2: Center frequency 2 3099 * @chan_freq: Primary channel frequency 3100 * @chan_width: Channel width 3101 */ 3102 struct vdev_spectral_configure_params { 3103 uint8_t vdev_id; 3104 uint16_t count; 3105 uint16_t period; 3106 uint16_t fft_recap; 3107 uint16_t spectral_pri; 3108 uint16_t fft_size; 3109 uint16_t gc_enable; 3110 uint16_t restart_enable; 3111 uint16_t noise_floor_ref; 3112 uint16_t init_delay; 3113 uint16_t nb_tone_thr; 3114 uint16_t str_bin_thr; 3115 uint16_t wb_rpt_mode; 3116 uint16_t rssi_rpt_mode; 3117 uint16_t rssi_thr; 3118 uint16_t pwr_format; 3119 uint16_t rpt_mode; 3120 uint16_t bin_scale; 3121 uint16_t dbm_adj; 3122 uint16_t chn_mask; 3123 uint16_t mode; 3124 uint16_t center_freq1; 3125 uint16_t center_freq2; 3126 uint16_t chan_freq; 3127 uint16_t chan_width; 3128 }; 3129 3130 /** 3131 * struct vdev_spectral_enable_params - Spectral enabled params 3132 * @vdev_id: VDEV id 3133 * @active_valid: Active valid 3134 * @active: active 3135 * @enabled_valid: Enabled valid 3136 * @enabled: enabled 3137 * @mode: Mode 3138 */ 3139 struct vdev_spectral_enable_params { 3140 uint8_t vdev_id; 3141 uint8_t active_valid; 3142 uint8_t active; 3143 uint8_t enabled_valid; 3144 uint8_t enabled; 3145 uint8_t mode; 3146 }; 3147 3148 #ifdef WLAN_CONV_SPECTRAL_ENABLE 3149 /** 3150 * struct spectral_fft_bin_markers_160_165mhz - Stores the start index 3151 * and length of FFT bins in 165 MHz/Restricted 80p80 or 160 MHz 3152 * mode in targets with a single Spectral detector 3153 * @is_valid: Indicates whether this structure holds valid data 3154 * @start_pri80: Starting index of FFT bins corresponding to primary 80 MHz 3155 * in 165 MHz/Restricted 80p80 or 160 MHz mode 3156 * @num_pri80: Number of FFT bins corresponding to primary 80 MHz 3157 * in 165 MHz/Restricted 80p80 or 160 MHz mode 3158 * @start_5mhz: Starting index of FFT bins corresponding to extra 5 MHz 3159 * in 165 MHz/Restricted 80p80 mode 3160 * @num_5mhz: Number of FFT bins corresponding to extra 5 MHz 3161 * in 165 MHz/Restricted 80p80 mode 3162 * @start_sec80: Starting index of FFT bins corresponding to secondary 80 MHz 3163 * in 165 MHz/Restricted 80p80 or 160 MHz mode 3164 * @num_sec80: Number of FFT bins corresponding to secondary 80 MHz 3165 * in 165 MHz/Restricted 80p80 or 160 MHz mode 3166 */ 3167 struct spectral_fft_bin_markers_160_165mhz { 3168 bool is_valid; 3169 uint16_t start_pri80; 3170 uint16_t num_pri80; 3171 uint16_t start_5mhz; 3172 uint16_t num_5mhz; 3173 uint16_t start_sec80; 3174 uint16_t num_sec80; 3175 }; 3176 3177 /** 3178 * struct spectral_startscan_resp_params - Params from the event send by 3179 * FW as a response to the scan start command 3180 * @pdev_id: Pdev id 3181 * @smode: Spectral scan mode 3182 * @num_fft_bin_index: Number of TLVs with FFT bin start and end indices 3183 * @num_det_info: Number of detector info TLVs 3184 */ 3185 struct spectral_startscan_resp_params { 3186 uint32_t pdev_id; 3187 enum spectral_scan_mode smode; 3188 uint8_t num_fft_bin_index; 3189 uint8_t num_det_info; 3190 }; 3191 3192 /** 3193 * struct spectral_session_chan_info - Spectral scan session channel information 3194 * @operating_pri20_freq: frequency of primary 20MHz channel (in MHz) 3195 * @operating_cfreq1: center frequency 1 of operating channel (in MHz) 3196 * @operating_cfreq2: center frequency 2 of operating channel (in MHz). 3197 * For contiguous channels, @operating_cfreq1 should be represent the center of 3198 * the entire span and @operating_cfreq2 should be 0, whereas for non-contiguous 3199 * channels, @operating_cfreq1 should represent the center of primary segment 3200 * and @@operating_cfreq2 should represent the center of secondary segment. 3201 * @operating_bw: operating bandwidth enumeration 3202 * @operating_puncture_20mhz_bitmap: Puncture bitmap of operating channel. 3203 * Each bit indicates one 20 MHz punctured channel 3204 * @sscan_cfreq1: center frequency 1 (in MHz) of the channel in which spectral 3205 * scan is done 3206 * @sscan_cfreq2: center frequency 2 (in MHz) of the channel in which spectral 3207 * scan is done. For contiguous channels, @sscan_cfreq1 should be represent the 3208 * center of the entire span and @sscan_cfreq2 should be 0, whereas for 3209 * non-contiguous channels, @sscan_cfreq1 should represent the center of primary 3210 * segment and @sscan_cfreq2 should represent the center of secondary segment. 3211 * @sscan_bw: bandwidth of the channel in which spectral scan is done 3212 * @sscan_puncture_20mhz_bitmap: Puncture bitmap of channel in which spectral 3213 * scan is done. Each bit indicates one 20 MHz punctured channel. 3214 */ 3215 struct spectral_session_chan_info { 3216 qdf_freq_t operating_pri20_freq; 3217 qdf_freq_t operating_cfreq1; 3218 qdf_freq_t operating_cfreq2; 3219 enum phy_ch_width operating_bw; 3220 uint16_t operating_puncture_20mhz_bitmap; 3221 3222 qdf_freq_t sscan_cfreq1; 3223 qdf_freq_t sscan_cfreq2; 3224 enum phy_ch_width sscan_bw; 3225 uint16_t sscan_puncture_20mhz_bitmap; 3226 }; 3227 3228 /** 3229 * struct spectral_session_det_info - Detector info for a spectral scan session 3230 * @det_id: detector ID 3231 * @start_freq: start frequency (in MHz) of this detector 3232 * @end_freq: end frequency (in MHz) of this detector 3233 */ 3234 struct spectral_session_det_info { 3235 uint8_t det_id; 3236 qdf_freq_t start_freq; 3237 qdf_freq_t end_freq; 3238 }; 3239 3240 /** 3241 * struct spectral_capabilities_event_params - parameters related to Spectral 3242 * capabilities event 3243 * @num_sscan_bw_caps: Number of spectral_scan_bw_capabilities TLVs 3244 * @num_fft_size_caps: Number of spectral_fft_size_capabilities TLVs 3245 */ 3246 struct spectral_capabilities_event_params { 3247 uint8_t num_sscan_bw_caps; 3248 uint8_t num_fft_size_caps; 3249 }; 3250 3251 /** 3252 * struct spectral_scan_bw_capabilities - Spectral scan bandwidth caps 3253 * that are extracted from Spectral capabilities WMI event 3254 * @pdev_id: pdev ID 3255 * @smode: Spectral scan mode 3256 * @operating_bw: Operating bandwidth 3257 * @supported_bws: Supported sscan bandwidths bitmap for given @pdev_id, 3258 * @operating_bw, and @smode 3259 */ 3260 struct spectral_scan_bw_capabilities { 3261 uint8_t pdev_id; 3262 enum spectral_scan_mode smode; 3263 enum phy_ch_width operating_bw; 3264 uint32_t supported_bws; 3265 }; 3266 3267 /** 3268 * struct spectral_fft_size_capabilities - Spectral scan FFT size caps 3269 * that are extracted from Spectral capabilities WMI event 3270 * @pdev_id: pdev ID 3271 * @sscan_bw: Spectral scan bandwidth 3272 * @sscan_bw: Supported FFT sizes bitmap for given @pdev_id and @sscan_bw 3273 */ 3274 struct spectral_fft_size_capabilities { 3275 uint8_t pdev_id; 3276 enum phy_ch_width sscan_bw; 3277 uint32_t supports_fft_sizes; 3278 }; 3279 #endif 3280 3281 /** 3282 * struct pdev_set_regdomain_params - PDEV set reg domain params 3283 * @currentRDinuse: Current Reg domain 3284 * @currentRD2G: Current Reg domain 2G 3285 * @currentRD5G: Current Reg domain 5G 3286 * @ctl_2G: CTL 2G 3287 * @ctl_5G: CTL 5G 3288 * @dfsDomain: DFS domain 3289 * @pdev_id: pdev_id 3290 */ 3291 struct pdev_set_regdomain_params { 3292 uint16_t currentRDinuse; 3293 uint16_t currentRD2G; 3294 uint16_t currentRD5G; 3295 uint32_t ctl_2G; 3296 uint32_t ctl_5G; 3297 uint8_t dfsDomain; 3298 uint32_t pdev_id; 3299 }; 3300 3301 /** 3302 * struct set_beacon_filter_params - Set beacon filter params 3303 * @vdev_id: VDEV id 3304 * @ie: Pointer to IE fields 3305 */ 3306 struct set_beacon_filter_params { 3307 uint8_t vdev_id; 3308 uint32_t *ie; 3309 }; 3310 3311 /** 3312 * struct remove_beacon_filter_params - Remove beacon filter params 3313 * @vdev_id: VDEV id 3314 */ 3315 struct remove_beacon_filter_params { 3316 uint8_t vdev_id; 3317 }; 3318 3319 /** 3320 * struct mgmt_params - Mgmt params 3321 * @vdev_id: vdev id 3322 * @buf_len: length of frame buffer 3323 * @wbuf: frame buffer 3324 */ 3325 struct mgmt_params { 3326 int vdev_id; 3327 uint32_t buf_len; 3328 qdf_nbuf_t wbuf; 3329 }; 3330 3331 /** 3332 * struct addba_clearresponse_params - Addba clear response params 3333 * @vdev_id: VDEV id 3334 */ 3335 struct addba_clearresponse_params { 3336 uint8_t vdev_id; 3337 }; 3338 3339 /** 3340 * struct addba_send_params - ADDBA send params 3341 * @vdev_id: vdev id 3342 * @tidno: TID 3343 * @buffersize: buffer size 3344 */ 3345 struct addba_send_params { 3346 uint8_t vdev_id; 3347 uint8_t tidno; 3348 uint16_t buffersize; 3349 }; 3350 3351 /** 3352 * struct delba_send_params - DELBA send params 3353 * @vdev_id: vdev id 3354 * @tidno: TID 3355 * @initiator: initiator 3356 * @reasoncode: reason code 3357 */ 3358 struct delba_send_params { 3359 uint8_t vdev_id; 3360 uint8_t tidno; 3361 uint8_t initiator; 3362 uint16_t reasoncode; 3363 }; 3364 /** 3365 * struct addba_setresponse_arams - Set ADDBA response params 3366 * @vdev_id: vdev id 3367 * @tidno: TID 3368 * @statuscode: status code in response 3369 */ 3370 struct addba_setresponse_params { 3371 uint8_t vdev_id; 3372 uint8_t tidno; 3373 uint16_t statuscode; 3374 }; 3375 3376 /** 3377 * struct singleamsdu_params - Single AMSDU params 3378 * @vdev_id: vdev is 3379 * @tidno: TID 3380 */ 3381 struct singleamsdu_params { 3382 uint8_t vdev_id; 3383 uint8_t tidno; 3384 }; 3385 3386 /** 3387 * struct mu_scan_params - MU scan params 3388 * @id: id 3389 * @type: type 3390 * @duration: Duration 3391 * @lteu_tx_power: LTEU tx power 3392 */ 3393 struct mu_scan_params { 3394 uint8_t id; 3395 uint8_t type; 3396 uint32_t duration; 3397 uint32_t lteu_tx_power; 3398 uint32_t rssi_thr_bssid; 3399 uint32_t rssi_thr_sta; 3400 uint32_t rssi_thr_sc; 3401 uint32_t plmn_id; 3402 uint32_t alpha_num_bssid; 3403 }; 3404 3405 /** 3406 * struct lteu_config_params - LTEU config params 3407 * @lteu_gpio_start: start MU/AP scan after GPIO toggle 3408 * @lteu_num_bins: no. of elements in the following arrays 3409 * @use_actual_nf: whether to use the actual NF obtained or a hardcoded one 3410 * @lteu_weight: weights for MU algo 3411 * @lteu_thresh: thresholds for MU algo 3412 * @lteu_gamma: gamma's for MU algo 3413 * @lteu_scan_timeout: timeout in ms to gpio toggle 3414 * @alpha_num_ssid: alpha for num active bssid calculation 3415 * @wifi_tx_power: Wifi Tx power 3416 */ 3417 struct lteu_config_params { 3418 uint8_t lteu_gpio_start; 3419 uint8_t lteu_num_bins; 3420 uint8_t use_actual_nf; 3421 uint32_t lteu_weight[LTEU_MAX_BINS]; 3422 uint32_t lteu_thresh[LTEU_MAX_BINS]; 3423 uint32_t lteu_gamma[LTEU_MAX_BINS]; 3424 uint32_t lteu_scan_timeout; 3425 uint32_t alpha_num_bssid; 3426 uint32_t wifi_tx_power; 3427 uint32_t allow_err_packets; 3428 }; 3429 3430 struct wmi_macaddr_t { 3431 /** upper 4 bytes of MAC address */ 3432 uint32_t mac_addr31to0; 3433 /** lower 2 bytes of MAC address */ 3434 uint32_t mac_addr47to32; 3435 }; 3436 3437 /** 3438 * struct wlan_profile_params - WLAN profile params 3439 * @param_id: param id 3440 * @profile_id: profile id 3441 * @enable: enable 3442 */ 3443 struct wlan_profile_params { 3444 uint32_t param_id; 3445 uint32_t profile_id; 3446 uint32_t enable; 3447 }; 3448 3449 /** 3450 * struct wmi_host_wmevParams - WME params 3451 * @wmep_acm: ACM paramete 3452 * @wmep_aifsn: AIFSN parameters 3453 * @wmep_logcwmin: cwmin in exponential form 3454 * @wmep_logcwmax: cwmax in exponential form 3455 * @wmep_txopLimit: txopLimit 3456 * @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack 3457 */ 3458 struct wmi_host_wme_vparams { 3459 u_int32_t acm; 3460 u_int32_t aifs; 3461 u_int32_t cwmin; 3462 u_int32_t cwmax; 3463 union { 3464 u_int32_t txoplimit; 3465 u_int32_t mu_edca_timer; 3466 }; 3467 u_int32_t noackpolicy; 3468 }; 3469 3470 /** 3471 * struct ratepwr_table_params - Rate power table params 3472 * @ratepwr_tbl: pointer to rate power table 3473 * @ratepwr_len: rate power table len 3474 */ 3475 struct ratepwr_table_params { 3476 uint8_t *ratepwr_tbl; 3477 uint16_t ratepwr_len; 3478 }; 3479 3480 /** 3481 * struct ratepwr_chainmask_params - Rate power chainmask params 3482 * @ratepwr_chain_tbl: pointer to ratepwr chain table 3483 * @num_rate: number of rate in table 3484 * @pream_type: preamble type 3485 * @ops: ops 3486 */ 3487 struct ratepwr_chainmsk_params { 3488 uint32_t *ratepwr_chain_tbl; 3489 uint16_t num_rate; 3490 uint8_t pream_type; 3491 uint8_t ops; 3492 }; 3493 3494 struct macaddr_params { 3495 uint8_t *macaddr; 3496 }; 3497 3498 /** 3499 * struct acparams_params - acparams config structure 3500 * @ac: AC to configure 3501 * @use_rts: Use rts for this AC 3502 * @aggrsize_scaling: Aggregrate size scaling for the AC 3503 * @min_kbps: min kbps req 3504 */ 3505 struct acparams_params { 3506 uint8_t ac; 3507 uint8_t use_rts; 3508 uint8_t aggrsize_scaling; 3509 uint32_t min_kbps; 3510 }; 3511 3512 /** 3513 * struct vap_dscp_tid_map_params - DSCP tid map params 3514 * @vdev_id: vdev id 3515 * @dscp_to_tid_map: pointer to arry of tid to dscp map table 3516 */ 3517 struct vap_dscp_tid_map_params { 3518 uint8_t vdev_id; 3519 uint32_t *dscp_to_tid_map; 3520 }; 3521 3522 /** 3523 * struct proxy_ast_reserve_params - Proxy AST reserve params 3524 * @macaddr: macaddr for proxy ast entry 3525 */ 3526 struct proxy_ast_reserve_params { 3527 uint8_t *macaddr; 3528 }; 3529 3530 /** 3531 * struct fips_params - FIPS params config 3532 * @key: pointer to key 3533 * @key_len: length of key 3534 * @data: pointer data buf 3535 * @data_len: length of data buf 3536 * @mode: mode 3537 * @op: operation 3538 * @pdev_id: pdev_id for identifying the MAC 3539 */ 3540 struct fips_params { 3541 uint8_t *key; 3542 uint32_t key_len; 3543 uint8_t *data; 3544 uint32_t data_len; 3545 uint32_t mode; 3546 uint32_t op; 3547 uint32_t pdev_id; 3548 }; 3549 3550 #ifdef WLAN_FEATURE_FIPS_BER_CCMGCM 3551 #define MAX_KEY_LEN_FIPS_EXTEND 64 3552 #define MAX_NONCEIV_LEN_FIPS_EXTEND 16 3553 /** 3554 * struct fips_extend_cmd_params - FIPS extend params config for first frag 3555 * @fips_cmd: 1 - Encrypt, 2 - Decrypt 3556 * key_cipher: 0 - CCM, 1 - GCM 3557 * @key_len: length of key 3558 * @key: key_data 3559 * @nonce_iv_len: length of nonce or iv 3560 * @nonce_iv: nonce_iv 3561 * @tag_len: length of tag/mic 3562 * @aad_len: length of aad 3563 * @payload_len: length of payload 3564 */ 3565 struct fips_extend_cmd_params { 3566 u_int32_t fips_cmd; 3567 u_int32_t key_cipher; 3568 u_int32_t key_len; 3569 u_int8_t key[MAX_KEY_LEN_FIPS_EXTEND]; 3570 u_int32_t nonce_iv_len; 3571 u_int8_t nonce_iv[MAX_NONCEIV_LEN_FIPS_EXTEND]; 3572 u_int32_t tag_len; 3573 u_int32_t aad_len; 3574 u_int32_t payload_len; 3575 }; 3576 3577 /** 3578 * struct fips_extend_params - FIPS extend params config 3579 * @pdev_id: pdev_id for identifying the MAC 3580 * @cookie: cookie value 3581 * @frag_idx: fragment index 3582 * @more_bit: more bit 3583 * @data_len: length of data buf 3584 * @cmd_params: cmd_params set for first fragment 3585 * @data: pointer data buf 3586 */ 3587 struct fips_extend_params { 3588 uint32_t pdev_id; 3589 u_int32_t cookie; 3590 u_int32_t frag_idx; 3591 u_int32_t more_bit; 3592 u_int32_t data_len; 3593 struct fips_extend_cmd_params cmd_params; 3594 u_int32_t *data; 3595 }; 3596 3597 /** 3598 * struct fips_mode_set_params - FIPS mode enable param 3599 * @pdev_id: pdev_id for identifying the MAC 3600 * @mode: value to disable or enable fips extend mode 3601 */ 3602 struct fips_mode_set_params { 3603 uint32_t pdev_id; 3604 uint32_t mode; 3605 }; 3606 #endif 3607 3608 #ifdef WLAN_FEATURE_DISA_FIPS 3609 /** 3610 * struct disa_encrypt_decrypt_req_params - disa encrypt request 3611 * @vdev_id: virtual device id 3612 * @key_flag: This indicates firmware to encrypt/decrypt payload 3613 * see ENCRYPT_DECRYPT_FLAG 3614 * @key_idx: Index used in storing key 3615 * @key_cipher: cipher used for encryption/decryption 3616 * Eg: see WMI_CIPHER_AES_CCM for CCMP 3617 * @key_len: length of key data 3618 * @key_txmic_len: length of Tx MIC 3619 * @key_rxmic_len: length of Rx MIC 3620 * @key_data: Key 3621 * @pn: packet number 3622 * @mac_header: MAC header 3623 * @data_len: length of data 3624 * @data: pointer to payload 3625 */ 3626 struct disa_encrypt_decrypt_req_params { 3627 uint32_t vdev_id; 3628 uint8_t key_flag; 3629 uint32_t key_idx; 3630 uint32_t key_cipher; 3631 uint32_t key_len; 3632 uint32_t key_txmic_len; 3633 uint32_t key_rxmic_len; 3634 uint8_t key_data[MAC_MAX_KEY_LENGTH]; 3635 uint8_t pn[MAC_PN_LENGTH]; 3636 uint8_t mac_header[MAX_MAC_HEADER_LEN]; 3637 uint32_t data_len; 3638 uint8_t *data; 3639 }; 3640 #endif 3641 3642 /** 3643 * struct periodic_chan_stats_param - periodic channel stats req param 3644 * @stats_period: stats period update 3645 * @enable: enable/disable 3646 */ 3647 struct periodic_chan_stats_params { 3648 uint32_t stats_period; 3649 bool enable; 3650 uint32_t pdev_id; 3651 }; 3652 3653 /** 3654 * enum wmi_host_packet_power_rate_flags: packer power rate flags 3655 * @WMI_HOST_FLAG_RTSENA: RTS enabled 3656 * @WMI_HOST_FLAG_CTSENA: CTS enabled 3657 * @WMI_HOST_FLAG_STBC: STBC is set 3658 * @WMI_HOST_FLAG_LDPC: LDPC is set 3659 * @WMI_HOST_FLAG_TXBF: Tx Bf enabled 3660 * @WMI_HOST_FLAG_MU2: MU2 data 3661 * @WMI_HOST_FLAG_MU3: MU3 data 3662 * @WMI_HOST_FLAG_SERIES1: Rate series 1 3663 * @WMI_HOST_FLAG_SGI: Short gaurd interval 3664 */ 3665 enum wmi_host_packet_power_rate_flags { 3666 WMI_HOST_FLAG_RTSENA = 0x0001, 3667 WMI_HOST_FLAG_CTSENA = 0x0002, 3668 WMI_HOST_FLAG_STBC = 0x0004, 3669 WMI_HOST_FLAG_LDPC = 0x0008, 3670 WMI_HOST_FLAG_TXBF = 0x0010, 3671 WMI_HOST_FLAG_MU2 = 0x0020, 3672 WMI_HOST_FLAG_MU3 = 0x0040, 3673 WMI_HOST_FLAG_SERIES1 = 0x0080, 3674 WMI_HOST_FLAG_SGI = 0x0100, 3675 }; 3676 3677 /** 3678 * enum wmi_host_su_mu_ofdma_flags: packer power su mu ofdma flags 3679 * @WMI_HOST_FLAG_SU: SU Data 3680 * @WMI_HOST_FLAG_DL_MU_MIMO_AC: DL AC MU data 3681 * @WMI_HOST_FLAG_DL_MU_MIMO_AX: DL AX MU data 3682 * @WMI_HOST_FLAG_DL_OFDMA: DL OFDMA data 3683 * @WMI_HOST_FLAG_UL_OFDMA: UL OFDMA data 3684 * @WMI_HOST_FLAG_UL_MU_MIMO: UL MU data 3685 */ 3686 enum wmi_host_su_mu_ofdma_flags { 3687 WMI_HOST_FLAG_SU = 0x0001, 3688 WMI_HOST_FLAG_DL_MU_MIMO_AC = 0x0002, 3689 WMI_HOST_FLAG_DL_MU_MIMO_AX = 0x0003, 3690 WMI_HOST_FLAG_DL_OFDMA = 0x0004, 3691 WMI_HOST_FLAG_UL_OFDMA = 0x0005, 3692 WMI_HOST_FLAG_UL_MU_MIMO = 0x0006, 3693 }; 3694 3695 /** 3696 * enum wmi_host_preamble_type: preamble type 3697 * @WMI_HOST_PREAMBLE_OFDM: ofdm rate 3698 * @WMI_HOST_PREAMBLE_CCK: cck rate 3699 * @WMI_HOST_PREAMBLE_HT: ht rate 3700 * @WMI_HOST_PREAMBLE_VHT: vht rate 3701 * @WMI_HOST_PREAMBLE_HE: 11ax he rate 3702 */ 3703 enum wmi_host_preamble_type { 3704 WMI_HOST_PREAMBLE_OFDM = 0, 3705 WMI_HOST_PREAMBLE_CCK = 1, 3706 WMI_HOST_PREAMBLE_HT = 2, 3707 WMI_HOST_PREAMBLE_VHT = 3, 3708 WMI_HOST_PREAMBLE_HE = 4, 3709 }; 3710 3711 /** 3712 * enum wmi_ratemask_type: ratemask type 3713 * @WMI_RATEMASK_TYPE_CCK: CCK rate mask type 3714 * @WMI_RATEMASK_TYPE_HT: HT rate mask type 3715 * @WMI_RATEMASK_TYPE_VHT: VHT rate mask type 3716 * @WMI_RATEMASK_TYPE_HE: HE rate mask type 3717 * 3718 * This is used for 'type' in WMI_VDEV_RATEMASK_CMDID 3719 */ 3720 enum wmi_ratemask_type { 3721 WMI_RATEMASK_TYPE_CCK = 0, 3722 WMI_RATEMASK_TYPE_HT = 1, 3723 WMI_RATEMASK_TYPE_VHT = 2, 3724 WMI_RATEMASK_TYPE_HE = 3, 3725 }; 3726 3727 /** 3728 * enum peer_txq_flush_policy - Peer flush policy values 3729 * @PEER_TXQ_FLUSH_POLICY_NONE: No policy configured for peer TID queues 3730 * @PEER_TXQ_FLUSH_POLICY_TWT_SP_END: flush peer TID queues after SP end 3731 * 3732 * This is mapped to 'flush_policy' in WMI_PEER_FLUSH_POLICY_CMDID 3733 */ 3734 enum peer_txq_flush_policy { 3735 PEER_TXQ_FLUSH_POLICY_NONE = 0, 3736 PEER_TXQ_FLUSH_POLICY_TWT_SP_END = 1, 3737 /*keep last */ 3738 PEER_TXQ_FLUSH_POLICY_INVALID, 3739 }; 3740 3741 /** 3742 * struct peer_txq_flush_config_params: Peer TXQ flush configuration parameters 3743 * @vdev_id: vdev id 3744 * @peer: Peer mac address 3745 * @tid_mask: TID queues of the peer being configured 3746 * @policy: Policy to be applied 3747 */ 3748 struct peer_txq_flush_config_params { 3749 uint8_t vdev_id; 3750 uint8_t peer[QDF_MAC_ADDR_SIZE]; 3751 uint32_t tid_mask; 3752 enum peer_txq_flush_policy policy; 3753 }; 3754 3755 /** 3756 * enum gpio_pull_type - GPIO PULL TYPE 3757 * @WMI_HOST_GPIO_PULL_NONE: set gpio pull type to none 3758 * @WMI_HOST_GPIO_PULL_UP: set gpio to pull up 3759 * @WMI_HOST_GPIO_PULL_DOWN: set gpio to pull down 3760 * @WMI_HOST_GPIO_PULL_MAX: invalid pull type 3761 */ 3762 enum gpio_pull_type { 3763 WMI_HOST_GPIO_PULL_NONE = 0, 3764 WMI_HOST_GPIO_PULL_UP = 1, 3765 WMI_HOST_GPIO_PULL_DOWN = 2, 3766 WMI_HOST_GPIO_PULL_MAX, 3767 }; 3768 3769 /** 3770 * enum gpio_interrupt_mode - GPIO INTERRUPT MODE 3771 * @WMI_HOST_GPIO_INTMODE_DISABLE: disable interrupt mode 3772 * @WMI_HOST_GPIO_INTMODE_RISING_EDGE: interrupt with rising edge trigger 3773 * @WMI_HOST_GPIO_INTMODE_FALLING_EDGE: interrupt with falling edge trigger 3774 * @WMI_HOST_GPIO_INTMODE_BOTH_EDGE: interrupt with both edge trigger 3775 * @WMI_HOST_GPIO_INTMODE_LEVEL_LOW: interrupt with gpio level low trigger 3776 * @WMI_HOST_GPIO_INTMODE_LEVEL_HIGH: interrupt with gpio level high trigger 3777 * @WMI_HOST_GPIO_INTMODE_MAX: invalid interrupt mode 3778 */ 3779 enum gpio_interrupt_mode { 3780 WMI_HOST_GPIO_INTMODE_DISABLE = 0, 3781 WMI_HOST_GPIO_INTMODE_RISING_EDGE = 1, 3782 WMI_HOST_GPIO_INTMODE_FALLING_EDGE = 2, 3783 WMI_HOST_GPIO_INTMODE_BOTH_EDGE = 3, 3784 WMI_HOST_GPIO_INTMODE_LEVEL_LOW = 4, 3785 WMI_HOST_GPIO_INTMODE_LEVEL_HIGH = 5, 3786 WMI_HOST_GPIO_INTMODE_MAX, 3787 }; 3788 3789 /** 3790 * enum qca_gpio_direction - GPIO Direction 3791 * @WLAN_GPIO_INPUT: set gpio as input mode 3792 * @WLAN_GPIO_OUTPUT: set gpio as output mode 3793 * @WLAN_GPIO_VALUE_MAX: invalid gpio direction 3794 */ 3795 enum gpio_direction { 3796 WMI_HOST_GPIO_INPUT = 0, 3797 WMI_HOST_GPIO_OUTPUT = 1, 3798 WMI_HOST_GPIO_DIR_MAX, 3799 }; 3800 3801 /** 3802 * enum fw_gpio_direction - GPIO Direction 3803 * @WMI_FW_GPIO_OUTPUT: set gpio as output mode 3804 * @WMI_FW_GPIO_INPUT: set gpio as input mode 3805 */ 3806 enum fw_gpio_direction { 3807 WMI_FW_GPIO_OUTPUT = 0, 3808 WMI_FW_GPIO_INPUT = 1, 3809 }; 3810 3811 /** 3812 * enum qca_gpio_value - GPIO Value 3813 * @WLAN_GPIO_LEVEL_LOW: set gpio output level low 3814 * @WLAN_GPIO_LEVEL_HIGH: set gpio output level high 3815 * @WLAN_GPIO_LEVEL_MAX: invalid gpio value 3816 */ 3817 enum gpio_value { 3818 WMI_HOST_GPIO_LEVEL_LOW = 0, 3819 WMI_HOST_GPIO_LEVEL_HIGH = 1, 3820 WMI_HOST_GPIO_LEVEL_MAX, 3821 }; 3822 3823 /** 3824 * enum gpio_init_enable - GPIO init enable 3825 * @WMI_HOST_GPIO_INIT_DISABLE: Disable INIT 3826 * @WMI_HOST_GPIO_INIT_ENABLE: Enable INIT 3827 * @WMI_HOST_GPIO_INIT_MAX: invalid gpio init_enable 3828 */ 3829 enum gpio_init_enable { 3830 WMI_HOST_GPIO_INIT_DISABLE = 0, 3831 WMI_HOST_GPIO_INIT_ENABLE = 1, 3832 WMI_HOST_GPIO_INIT_MAX, 3833 }; 3834 3835 /** 3836 * enum gpio_drive - GPIO drive 3837 * @WMI_HOST_GPIO_DRIVE_2MA: drive 2MA 3838 * @WMI_HOST_GPIO_DRIVE_4MA: drive 4MA 3839 * @WMI_HOST_GPIO_DRIVE_6MA: drive 6MA 3840 * @WMI_HOST_GPIO_DRIVE_8MA: drive 8MA 3841 * @WMI_HOST_GPIO_DRIVE_10MA: drive 10MA 3842 * @WMI_HOST_GPIO_DRIVE_12MA: drive 12MA 3843 * @WMI_HOST_GPIO_DRIVE_14MA: drive 14MA 3844 * @WMI_HOST_GPIO_DRIVE_16MA: drive 16MA 3845 * @WMI_HOST_GPIO_DRIVE_MAX: invalid gpio drive 3846 */ 3847 enum gpio_drive { 3848 WMI_HOST_GPIO_DRIVE_2MA = 0, 3849 WMI_HOST_GPIO_DRIVE_4MA = 1, 3850 WMI_HOST_GPIO_DRIVE_6MA = 2, 3851 WMI_HOST_GPIO_DRIVE_8MA = 3, 3852 WMI_HOST_GPIO_DRIVE_10MA = 4, 3853 WMI_HOST_GPIO_DRIVE_12MA = 5, 3854 WMI_HOST_GPIO_DRIVE_14MA = 6, 3855 WMI_HOST_GPIO_DRIVE_16MA = 7, 3856 WMI_HOST_GPIO_DRIVE_MAX, 3857 }; 3858 3859 /** 3860 * enum gpio_mux_config - GPIO mux_config 3861 * @WMI_HOST_GPIO_MUX_DEFAULT: Default mux value 3862 * @WMI_HOST_GPIO_MUX_MAX: maximum allowed gpio mux_config 3863 */ 3864 enum gpio_mux_config { 3865 WMI_HOST_GPIO_MUX_DEFAULT = 0, 3866 WMI_HOST_GPIO_MUX_MAX = 15, 3867 }; 3868 3869 /** 3870 * struct wmi_host_gpio_input_event - GPIO input event structure 3871 * @gpio_num: GPIO number which changed state 3872 */ 3873 typedef struct { 3874 uint32_t gpio_num; /* GPIO number which changed state */ 3875 } wmi_host_gpio_input_event; 3876 3877 /** 3878 * struct gpio_config_params - GPIO config params 3879 * @pin_num: GPIO number to config 3880 * @pin_dir: gpio direction, 1-input/0-output 3881 * @pin_pull_type: pull type define in gpio_pull_type 3882 * @pin_intr_mode: interrupt mode define in gpio_interrupt_mode 3883 */ 3884 struct gpio_config_params { 3885 uint32_t pin_num; 3886 enum gpio_direction pin_dir; 3887 enum gpio_pull_type pin_pull_type; 3888 enum gpio_interrupt_mode pin_intr_mode; 3889 enum gpio_mux_config mux_config_val; 3890 enum gpio_drive drive; 3891 enum gpio_init_enable init_enable; 3892 }; 3893 3894 /** 3895 * struct gpio_output_params - GPIO output params 3896 * @pin_num: GPIO number to configure 3897 * @pinset: 1 mean gpio output high level, 0 mean gpio output low level 3898 */ 3899 struct gpio_output_params { 3900 uint32_t pin_num; 3901 enum gpio_value pin_set; 3902 }; 3903 3904 /* flags bit 0: to configure wlan priority bitmap */ 3905 #define WMI_HOST_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT (1<<0) 3906 /* flags bit 1: to configure both period and wlan duration */ 3907 #define WMI_HOST_BTCOEX_PARAM_FLAGS_DUTY_CYCLE_BIT (1<<1) 3908 struct btcoex_cfg_params { 3909 /* WLAN priority bitmask for different frame types */ 3910 uint32_t btcoex_wlan_priority_bitmap; 3911 /* This command is used to configure different btcoex params 3912 * in different situations.The host sets the appropriate bit(s) 3913 * in btcoex_param_flags to indicate which configuration parameters 3914 * are valid within a particular BT coex config message, so that one 3915 * BT configuration parameter can be configured without affecting 3916 * other BT configuration parameters.E.g. if the host wants to 3917 * configure only btcoex_wlan_priority_bitmap it sets only 3918 * WMI_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT in 3919 * btcoex_param_flags so that firmware will not overwrite 3920 * other params with default value passed in the command. 3921 * Host can also set multiple bits in btcoex_param_flags 3922 * to configure more than one param in single message. 3923 */ 3924 uint32_t btcoex_param_flags; 3925 /* period denotes the total time in milliseconds which WLAN and BT share 3926 * configured percentage for transmission and reception. 3927 */ 3928 uint32_t period; 3929 /* wlan duration is the time in milliseconds given for wlan 3930 * in above period. 3931 */ 3932 uint32_t wlan_duration; 3933 }; 3934 3935 #define WMI_HOST_COEX_CONFIG_BUF_MAX_LEN 32 /* 128 bytes */ 3936 /** 3937 * coex_ver_cfg_t 3938 * @coex_version: Version for 4 wire coex 3939 * @length: Length of payload buffer based on version 3940 * @config_buf: Payload Buffer 3941 */ 3942 typedef struct { 3943 /* VERSION_4 (4 wire coex) */ 3944 uint32_t coex_version; 3945 3946 /* No. of uint32_t elements in payload buffer. Will depend on the coex 3947 * version 3948 */ 3949 uint32_t length; 3950 3951 /* Payload buffer */ 3952 uint32_t config_buf[WMI_HOST_COEX_CONFIG_BUF_MAX_LEN]; 3953 } coex_ver_cfg_t; 3954 3955 #define WMI_HOST_RTT_REPORT_CFR 0 3956 #define WMI_HOST_RTT_NO_REPORT_CFR 1 3957 #define WMI_HOST_RTT_AGGREGATE_REPORT_NON_CFR 2 3958 /** 3959 * struct rtt_meas_req_test_params 3960 * @peer: peer mac address 3961 * @req_frame_type: RTT request frame type 3962 * @req_bw: requested bandwidth 3963 * @req_preamble: Preamble 3964 * @req_num_req: num of requests 3965 * @req_report_type: report type 3966 * @num_measurements: number of measurements 3967 * @asap_mode: priority 3968 * @lci_requested: LCI requested 3969 * @loc_civ_requested: 3970 * @channel_param: channel param 3971 * @req_id: requested id 3972 */ 3973 struct rtt_meas_req_test_params { 3974 uint8_t peer[QDF_MAC_ADDR_SIZE]; 3975 int req_frame_type; 3976 int req_bw; 3977 int req_preamble; 3978 int req_num_req; 3979 int req_report_type; 3980 uint32_t num_measurements; 3981 uint32_t asap_mode; 3982 uint32_t lci_requested; 3983 uint32_t loc_civ_requested; 3984 struct channel_param channel; 3985 uint8_t req_id; 3986 }; 3987 3988 /** 3989 * struct peer_request_pn_param - PN request params 3990 * @vdev_id: vdev id 3991 * @peer_macaddr: Peer mac address 3992 * @key_type: key type 3993 */ 3994 struct peer_request_pn_param { 3995 uint32_t vdev_id; 3996 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 3997 uint32_t key_type; 3998 }; 3999 4000 /** 4001 * struct peer_request_rxpn_param - Rx PN request params 4002 * @vdev_id: vdev id 4003 * @peer_macaddr: Peer mac address 4004 * @keyix: key index 4005 */ 4006 struct peer_request_rxpn_param { 4007 uint32_t vdev_id; 4008 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 4009 uint16_t keyix; 4010 }; 4011 4012 /** 4013 * struct rtt_meas_req_params - RTT measurement request params 4014 * @req_id: Request id 4015 * @vdev_id: vdev id 4016 * @is_mode_na: 11NA 4017 * @is_mode_ac: AC 4018 * @is_bw_20: 20 4019 * @is_bw_40: 40 4020 * @is_bw_80: 80 4021 * @sta_mac_addr: pointer to station mac address 4022 * @spoof_mac_addr: pointer to spoof mac address 4023 * @num_probe_rqst: number of probe request 4024 * @channel_param: channel param 4025 */ 4026 struct rtt_meas_req_params { 4027 uint8_t req_id; 4028 uint8_t vdev_id; 4029 bool is_mode_na; 4030 bool is_mode_ac; 4031 bool is_bw_20; 4032 bool is_bw_40; 4033 bool is_bw_80; 4034 uint8_t *sta_mac_addr; 4035 uint8_t *spoof_mac_addr; 4036 uint32_t num_probe_rqst; 4037 struct channel_param channel; 4038 }; 4039 4040 /** 4041 * struct lci_set_params - LCI params 4042 * @lci_data: pointer to LCI data 4043 * @latitude_unc: latitude 4044 * @latitude_0_12: bits 0 to 1 of latitude 4045 * @latitude_2_33: bits 2 to 33 of latitude 4046 * @longitude_unc: longitude 4047 * @longitude_0_1: bits 0 to 1 of longitude 4048 * @longitude_2_33: bits 2 to 33 of longitude 4049 * @altitude_type: altitude type 4050 * @altitude_unc_0_3: altitude bits 0 - 3 4051 * @altitude_unc_4_5: altitude bits 4 - 5 4052 * @altitude: altitude 4053 * @datum: dataum 4054 * @reg_loc_agmt: 4055 * @reg_loc_dse: 4056 * @dep_sta: 4057 * @version: version 4058 */ 4059 struct lci_set_params { 4060 void *lci_data; 4061 uint8_t latitude_unc:6, 4062 latitude_0_1:2; 4063 uint32_t latitude_2_33; 4064 uint8_t longitude_unc:6, 4065 longitude_0_1:2; 4066 uint32_t longitude_2_33; 4067 uint8_t altitude_type:4, 4068 altitude_unc_0_3:4; 4069 uint32_t altitude_unc_4_5:2, 4070 altitude:30; 4071 uint8_t datum:3, 4072 reg_loc_agmt:1, 4073 reg_loc_dse:1, 4074 dep_sta:1, 4075 version:2; 4076 uint8_t *colocated_bss; 4077 int msg_len; 4078 }; 4079 4080 /** 4081 * struct lcr_set_params - LCR params 4082 * @lcr_data: pointer to lcr data 4083 */ 4084 struct lcr_set_params { 4085 void *lcr_data; 4086 int msg_len; 4087 }; 4088 4089 /** 4090 * struct rtt_keepalive_req_params - RTT keepalive params 4091 * @macaddr: pointer to macaddress 4092 * @req_id: Request id 4093 * @vdev_id: vdev id 4094 * @stop: start/stop 4095 */ 4096 struct rtt_keepalive_req_params { 4097 uint8_t *macaddr; 4098 uint8_t req_id; 4099 uint8_t vdev_id; 4100 bool stop; 4101 }; 4102 4103 /** 4104 * struct rx_reorder_queue_setup_params - Reorder queue setup params 4105 * @peer_mac_addr: Peer mac address 4106 * @tid: TID 4107 * @vdev_id: vdev id 4108 * @hw_qdesc_paddr_lo: lower 32 bits of queue desc adddress 4109 * @hw_qdesc_paddr_hi: upper 32 bits of queue desc adddress 4110 * @queue_no: 16-bit number assigned by host for queue 4111 * @ba_window_size_valid: BA window size validity flag 4112 * @ba_window_size: BA window size 4113 */ 4114 struct rx_reorder_queue_setup_params { 4115 uint8_t *peer_macaddr; 4116 uint16_t tid; 4117 uint16_t vdev_id; 4118 uint32_t hw_qdesc_paddr_lo; 4119 uint32_t hw_qdesc_paddr_hi; 4120 uint16_t queue_no; 4121 uint8_t ba_window_size_valid; 4122 uint16_t ba_window_size; 4123 4124 }; 4125 4126 /** 4127 * struct rx_reorder_queue_remove_params - Reorder queue setup params 4128 * @peer_mac_addr: Peer mac address 4129 * @vdev_id: vdev id 4130 * @peer_tid_bitmap: peer tid bitmap 4131 */ 4132 struct rx_reorder_queue_remove_params { 4133 uint8_t *peer_macaddr; 4134 uint16_t vdev_id; 4135 uint32_t peer_tid_bitmap; 4136 }; 4137 4138 /** 4139 * struct wmi_host_stats_event - Stats event params 4140 * @stats_id: stats id of type wmi_host_stats_event 4141 * @num_pdev_stats: number of pdev stats event structures 0 or 1 4142 * @num_pdev_ext_stats: number of pdev ext stats event structures 4143 * @num_vdev_stats: number of vdev stats 4144 * @num_peer_stats: number of peer stats event structures 0 or max peers 4145 * @num_peer_extd_stats: number of peer extended stats event structures 0 4146 * or max peers 4147 * @num_bcnflt_stats: number of beacon filter stats 4148 * @num_chan_stats: number of channel stats 4149 * @pdev_id: device id for the radio 4150 * @num_bcn_stats: number of beacon stats 4151 * @num_rssi_stats: number of rssi stats 4152 * @num_peer_adv_stats: number of peer adv stats 4153 * @num_mib_stats: number of mib stats 4154 * @num_mib_extd_stats: number of extended mib stats 4155 * @num_peer_stats_info_ext: number of peer extended stats info 4156 * @num_vdev_extd_stats: number of vdev extended stats info 4157 * @last_event: specify if the current event is the last event 4158 */ 4159 typedef struct { 4160 wmi_host_stats_id stats_id; 4161 uint32_t num_pdev_stats; 4162 uint32_t num_pdev_ext_stats; 4163 uint32_t num_vdev_stats; 4164 uint32_t num_peer_stats; 4165 uint32_t num_peer_extd_stats; 4166 uint32_t num_bcnflt_stats; 4167 uint32_t num_chan_stats; 4168 uint32_t pdev_id; 4169 uint32_t num_bcn_stats; 4170 uint32_t num_rssi_stats; 4171 uint32_t num_peer_adv_stats; 4172 uint32_t num_mib_stats; 4173 uint32_t num_mib_extd_stats; 4174 uint32_t num_peer_stats_info_ext; 4175 uint32_t num_vdev_extd_stats; 4176 uint32_t last_event; 4177 } wmi_host_stats_event; 4178 4179 /** 4180 * struct wmi_host_peer_extd_stats - peer extd stats event structure 4181 * @peer_macaddr: Peer mac address 4182 * @inactive_time: inactive time in secs 4183 * @peer_chain_rssi: peer rssi 4184 * @rx_duration: RX duration 4185 * @peer_tx_bytes: TX bytes 4186 * @last_tx_rate_code: Tx rate code of last frame 4187 * @last_tx_power: Tx power latest 4188 * @atf_tokens_allocated: atf tokens allocated 4189 * @atf_tokens_utilized: atf tokens utilized 4190 * @num_mu_tx_denylisted: Denylisted MU Tx count 4191 * @sgi_count: sgi count of the peer 4192 * @rx_mc_bc_cnt: Total number of received multicast & broadcast data frames 4193 * corresponding to this peer, 1 in the MSB of rx_mc_bc_cnt represents a 4194 * valid data 4195 * @rx_retry_cnt: Number of rx retries received from current station 4196 */ 4197 typedef struct { 4198 wmi_host_mac_addr peer_macaddr; 4199 uint32_t inactive_time; 4200 uint32_t peer_chain_rssi; 4201 uint32_t rx_duration; 4202 uint32_t peer_tx_bytes; 4203 uint32_t last_tx_rate_code; 4204 uint32_t last_tx_power; 4205 uint32_t atf_tokens_allocated; 4206 uint32_t atf_tokens_utilized; 4207 uint32_t num_mu_tx_denylisted; 4208 uint32_t sgi_count; 4209 uint32_t rx_mc_bc_cnt; 4210 uint32_t rx_retry_cnt; 4211 } wmi_host_peer_extd_stats; 4212 4213 /** 4214 * struct wmi_host_peer_adv_stats - peer adv stats event structure 4215 * @peer_macaddr: mac address 4216 * @fcs_count: fcs count 4217 * @rx_count: rx count 4218 * @rx_bytes: rx bytes 4219 */ 4220 struct wmi_host_peer_adv_stats { 4221 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 4222 uint32_t fcs_count; 4223 uint32_t rx_count; 4224 uint64_t rx_bytes; 4225 }; 4226 4227 /** 4228 * struct wmi_host_pdev_ext_stats - peer ext stats structure 4229 * @rx_rssi_comb: RX rssi 4230 * @rx_rssi_chain0: RX rssi chain 0 4231 * @rx_rssi_chain1: RX rssi chain 1 4232 * @rx_rssi_chain2: RX rssi chain 2 4233 * @rx_rssi_chain3: RX rssi chain 3 4234 * @rx_mcs: RX MCS array 4235 * @tx_mcs: TX MCS array 4236 * @ack_rssi: Ack rssi 4237 * @my_rx_count: What portion of time, as measured by the MAC HW clock was 4238 * occupied by receiving PPDUs addressed to one of the vdevs 4239 * within this pdev. 4240 * @rx_matched_11ax_msdu_cnt: number of Rx 11ax MSDUs with matching BSS color 4241 * counter updated at EOP (end of packet) 4242 * @rx_other_11ax_msdu_cnt: number of Rx 11ax MSDUs with other BSS color counter 4243 * updated at EOP (end of packet) 4244 * @pdev_id: pdev id 4245 */ 4246 typedef struct { 4247 uint32_t rx_rssi_comb; 4248 uint32_t rx_rssi_chain0; 4249 uint32_t rx_rssi_chain1; 4250 uint32_t rx_rssi_chain2; 4251 uint32_t rx_rssi_chain3; 4252 uint32_t rx_mcs[10]; 4253 uint32_t tx_mcs[10]; 4254 uint32_t ack_rssi; 4255 uint32_t my_rx_count; 4256 uint32_t rx_matched_11ax_msdu_cnt; 4257 uint32_t rx_other_11ax_msdu_cnt; 4258 uint32_t pdev_id; 4259 } wmi_host_pdev_ext_stats; 4260 4261 /** 4262 * struct wmi_host_dbg_tx_stats - Debug stats 4263 * @comp_queued: Num HTT cookies queued to dispatch list 4264 * @comp_delivered: Num HTT cookies dispatched 4265 * @msdu_enqued: Num MSDU queued to WAL 4266 * @mpdu_enqued: Num MPDU queue to WAL 4267 * @wmm_drop: Num MSDUs dropped by WMM limit 4268 * @local_enqued: Num Local frames queued 4269 * @local_freed: Num Local frames done 4270 * @hw_queued: Num queued to HW 4271 * @hw_reaped: Num PPDU reaped from HW 4272 * @underrun: Num underruns 4273 * @hw_paused: HW Paused. 4274 * @tx_abort: Num PPDUs cleaned up in TX abort 4275 * @mpdus_requed: Num MPDUs requed by SW 4276 * @tx_ko: excessive retries 4277 * @tx_xretry: 4278 * @data_rc: data hw rate code 4279 * @self_triggers: Scheduler self triggers 4280 * @sw_retry_failure: frames dropped due to excessive sw retries 4281 * @illgl_rate_phy_err: illegal rate phy errors 4282 * @pdev_cont_xretry: wal pdev continuous xretry 4283 * @pdev_tx_timeout: wal pdev continuous xretry 4284 * @pdev_resets: wal pdev resets 4285 * @stateless_tid_alloc_failure: frames dropped due to non-availability of 4286 * stateless TIDs 4287 * @phy_underrun: PhY/BB underrun 4288 * @txop_ovf: MPDU is more than txop limit 4289 * @seq_posted: Number of Sequences posted 4290 * @seq_failed_queueing: Number of Sequences failed queueing 4291 * @seq_completed: Number of Sequences completed 4292 * @seq_restarted: Number of Sequences restarted 4293 * @mu_seq_posted: Number of MU Sequences posted 4294 * @mpdus_sw_flush: Num MPDUs flushed by SW, HWPAUSED, SW TXABORT 4295 * (Reset,channel change) 4296 * @mpdus_hw_filter: Num MPDUs filtered by HW, all filter condition 4297 * (TTL expired) 4298 * @mpdus_truncated: Num MPDUs truncated by PDG (TXOP, TBTT, 4299 * PPDU_duration based on rate, dyn_bw) 4300 * @mpdus_ack_failed: Num MPDUs that was tried but didn't receive ACK or BA 4301 * @mpdus_expired: Num MPDUs that was dropped du to expiry. 4302 * @mc_dropr: Num mc drops 4303 */ 4304 typedef struct { 4305 int32_t comp_queued; 4306 int32_t comp_delivered; 4307 int32_t msdu_enqued; 4308 int32_t mpdu_enqued; 4309 int32_t wmm_drop; 4310 int32_t local_enqued; 4311 int32_t local_freed; 4312 int32_t hw_queued; 4313 int32_t hw_reaped; 4314 int32_t underrun; 4315 uint32_t hw_paused; 4316 int32_t tx_abort; 4317 int32_t mpdus_requed; 4318 uint32_t tx_ko; 4319 uint32_t tx_xretry; 4320 uint32_t data_rc; 4321 uint32_t self_triggers; 4322 uint32_t sw_retry_failure; 4323 uint32_t illgl_rate_phy_err; 4324 uint32_t pdev_cont_xretry; 4325 uint32_t pdev_tx_timeout; 4326 uint32_t pdev_resets; 4327 uint32_t stateless_tid_alloc_failure; 4328 uint32_t phy_underrun; 4329 uint32_t txop_ovf; 4330 uint32_t seq_posted; 4331 uint32_t seq_failed_queueing; 4332 uint32_t seq_completed; 4333 uint32_t seq_restarted; 4334 uint32_t mu_seq_posted; 4335 int32_t mpdus_sw_flush; 4336 int32_t mpdus_hw_filter; 4337 int32_t mpdus_truncated; 4338 int32_t mpdus_ack_failed; 4339 int32_t mpdus_expired; 4340 uint32_t mc_drop; 4341 } wmi_host_dbg_tx_stats; 4342 4343 /** 4344 * struct wmi_host_dbg_rx_stats - RX Debug stats 4345 * @mid_ppdu_route_change: Cnts any change in ring routing mid-ppdu 4346 * @status_rcvd: Total number of statuses processed 4347 * @r0_frags: Extra frags on rings 0 4348 * @r1_frags: Extra frags on rings 1 4349 * @r2_frags: Extra frags on rings 2 4350 * @r3_frags: Extra frags on rings 3 4351 * @htt_msdus: MSDUs delivered to HTT 4352 * @htt_mpdus: MPDUs delivered to HTT 4353 * @loc_msdus: MSDUs delivered to local stack 4354 * @loc_mpdus: MPDUS delivered to local stack 4355 * @oversize_amsdu: AMSDUs that have more MSDUs than the status ring size 4356 * @phy_errs: Number of PHY errors 4357 * @phy_err_drop: Number of PHY errors drops 4358 * @mpdu_errs: Number of mpdu errors - FCS, MIC, ENC etc. 4359 * @pdev_rx_timeout: Number of rx inactivity timeouts 4360 * @rx_ovfl_errs: Number of rx overflow errors. 4361 */ 4362 typedef struct { 4363 int32_t mid_ppdu_route_change; 4364 int32_t status_rcvd; 4365 int32_t r0_frags; 4366 int32_t r1_frags; 4367 int32_t r2_frags; 4368 int32_t r3_frags; 4369 int32_t htt_msdus; 4370 int32_t htt_mpdus; 4371 int32_t loc_msdus; 4372 int32_t loc_mpdus; 4373 int32_t oversize_amsdu; 4374 int32_t phy_errs; 4375 int32_t phy_err_drop; 4376 int32_t mpdu_errs; 4377 uint32_t pdev_rx_timeout; 4378 int32_t rx_ovfl_errs; 4379 } wmi_host_dbg_rx_stats; 4380 4381 /** struct wmi_host_dbg_mem_stats - memory stats 4382 * @iram_free_size: IRAM free size on target 4383 * @dram_free_size: DRAM free size on target 4384 * @sram_free_size: SRAM free size on target 4385 */ 4386 typedef struct { 4387 uint32_t iram_free_size; 4388 uint32_t dram_free_size; 4389 /* Only Non-TLV */ 4390 uint32_t sram_free_size; 4391 } wmi_host_dbg_mem_stats; 4392 4393 typedef struct { 4394 /* Only TLV */ 4395 int32_t dummy;/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4396 } wmi_host_dbg_peer_stats; 4397 4398 /** 4399 * struct wmi_host_dbg_stats - host debug stats 4400 * @tx: TX stats of type wmi_host_dbg_tx_stats 4401 * @rx: RX stats of type wmi_host_dbg_rx_stats 4402 * @mem: Memory stats of type wmi_host_dbg_mem_stats 4403 * @peer: peer stats of type wmi_host_dbg_peer_stats 4404 */ 4405 typedef struct { 4406 wmi_host_dbg_tx_stats tx; 4407 wmi_host_dbg_rx_stats rx; 4408 wmi_host_dbg_mem_stats mem; 4409 wmi_host_dbg_peer_stats peer; 4410 } wmi_host_dbg_stats; 4411 4412 /** 4413 * struct wmi_host_pdev_stats - PDEV stats 4414 * @chan_nf: Channel noise floor 4415 * @tx_frame_count: TX frame count 4416 * @rx_frame_count: RX frame count 4417 * @rx_clear_count: rx clear count 4418 * @cycle_count: cycle count 4419 * @phy_err_count: Phy error count 4420 * @chan_tx_pwr: Channel Tx Power 4421 * @pdev_stats: WAL dbg stats 4422 * @ackRcvBad: 4423 * @rtsBad: 4424 * @rtsGood: 4425 * @fcsBad: 4426 * @noBeacons: 4427 * @mib_int_count: 4428 * @pdev_id: pdev id 4429 */ 4430 typedef struct { 4431 int32_t chan_nf; 4432 uint32_t tx_frame_count; 4433 uint32_t rx_frame_count; 4434 uint32_t rx_clear_count; 4435 uint32_t cycle_count; 4436 uint32_t phy_err_count; 4437 uint32_t chan_tx_pwr; 4438 wmi_host_dbg_stats pdev_stats; 4439 uint32_t ackRcvBad; 4440 uint32_t rtsBad; 4441 uint32_t rtsGood; 4442 uint32_t fcsBad; 4443 uint32_t noBeacons; 4444 uint32_t mib_int_count; 4445 uint32_t pdev_id; 4446 } wmi_host_pdev_stats; 4447 4448 /** 4449 * struct wmi_host_pmf_bcn_protect_stats - PMF bcn protect stats 4450 * @igtk_mic_fail_cnt: MIC failure count of management packets using IGTK 4451 * @igtk_replay_cnt: Replay detection count of management packets using IGTK 4452 * @bcn_mic_fail_cnt: MIC failure count of beacon packets using BIGTK 4453 * @bcn_replay_cnt: Replay detection count of beacon packets using BIGTK 4454 */ 4455 typedef struct { 4456 uint32_t igtk_mic_fail_cnt; 4457 uint32_t igtk_replay_cnt; 4458 uint32_t bcn_mic_fail_cnt; 4459 uint32_t bcn_replay_cnt; 4460 } wmi_host_pmf_bcn_protect_stats; 4461 4462 /** 4463 * struct wmi_unit_test_event - Structure corresponding to WMI Unit test event 4464 * @vdev_id: VDEV ID 4465 * @module_id: MODULE ID 4466 * @diag_token: Diag Token (the number that was generated in the unit-test cmd) 4467 * @flag: flag has 2 bits 0x1 indicates status, and 0x2 indicates done-bit 4468 * @payload_len: payload_len (blindly copied from payload_len field in WMI) 4469 * @buffer_len: actual number of data bytes in the variable data size TLV 4470 * buffer_len is likely to be the nearest multiple of 4 (from 4471 * payload_len). both buffer_len and payload_len need to be 4472 * passed to wifitool so that the driver can be agnostic 4473 * regarding these differences. 4474 * @buffer: data buffer 4475 */ 4476 typedef struct { 4477 uint32_t vdev_id; 4478 uint32_t module_id; 4479 uint32_t diag_token; 4480 uint32_t flag; 4481 uint32_t payload_len; 4482 uint32_t buffer_len; 4483 uint8_t buffer[1]; 4484 } wmi_unit_test_event; 4485 4486 4487 /** 4488 * struct wmi_host_snr_info - WMI host Signal to noise ration info 4489 * @bcn_snr: beacon SNR 4490 * @dat_snr: Data frames SNR 4491 */ 4492 typedef struct { 4493 int32_t bcn_snr; 4494 int32_t dat_snr; 4495 } wmi_host_snr_info; 4496 4497 #define WMI_HOST_MAX_TX_RATE_VALUES 10 /*Max Tx Rates */ 4498 #define WMI_HOST_MAX_RSSI_VALUES 10 /*Max Rssi values */ 4499 4500 /* The WLAN_MAX_AC macro cannot be changed without breaking 4501 * * WMI compatibility. 4502 * * The maximum value of access category 4503 * */ 4504 #define WMI_HOST_WLAN_MAX_AC 4 4505 4506 /* The WMI_HOST_MAX_CHAINS macro cannot be changed without breaking WMI 4507 * compatibility. 4508 * The maximum value of number of chains 4509 */ 4510 #define WMI_HOST_MAX_CHAINS 8 4511 4512 /** 4513 * struct wmi_host_vdev_stats - vdev stats structure 4514 * @vdev_id: unique id identifying the VDEV, generated by the caller 4515 * Rest all Only TLV 4516 * @vdev_snr: wmi_host_snr_info 4517 * @tx_frm_cnt: Total number of packets(per AC) that were successfully 4518 * transmitted (with and without retries, 4519 * including multi-cast, broadcast) 4520 * @rx_frm_cnt: Total number of packets that were successfully received 4521 * (after appropriate filter rules including multi-cast, broadcast) 4522 * @multiple_retry_cnt: The number of MSDU packets and MMPDU frames per AC 4523 * that the 802.11 station successfully transmitted after 4524 * more than one retransmission attempt 4525 * @fail_cnt: Total number packets(per AC) failed to transmit 4526 * @rts_fail_cnt: Total number of RTS/CTS sequence failures for transmission 4527 * of a packet 4528 * @rts_succ_cnt: Total number of RTS/CTS sequence success for transmission 4529 * of a packet 4530 * @rx_err_cnt: The receive error count. HAL will provide the 4531 * RxP FCS error global 4532 * @rx_discard_cnt: The sum of the receive error count and 4533 * dropped-receive-buffer error count (FCS error) 4534 * @ack_fail_cnt: Total number packets failed transmit because of no 4535 * ACK from the remote entity 4536 * @tx_rate_history:History of last ten transmit rate, in units of 500 kbit/sec 4537 * @bcn_rssi_history: History of last ten Beacon rssi of the connected Bss 4538 */ 4539 typedef struct { 4540 uint32_t vdev_id; 4541 /* Rest all Only TLV */ 4542 wmi_host_snr_info vdev_snr; 4543 uint32_t tx_frm_cnt[WMI_HOST_WLAN_MAX_AC]; 4544 uint32_t rx_frm_cnt; 4545 uint32_t multiple_retry_cnt[WMI_HOST_WLAN_MAX_AC]; 4546 uint32_t fail_cnt[WMI_HOST_WLAN_MAX_AC]; 4547 uint32_t rts_fail_cnt; 4548 uint32_t rts_succ_cnt; 4549 uint32_t rx_err_cnt; 4550 uint32_t rx_discard_cnt; 4551 uint32_t ack_fail_cnt; 4552 uint32_t tx_rate_history[WMI_HOST_MAX_TX_RATE_VALUES]; 4553 uint32_t bcn_rssi_history[WMI_HOST_MAX_RSSI_VALUES]; 4554 } wmi_host_vdev_stats; 4555 4556 /** 4557 * struct wmi_host_vdev_stats - vdev stats structure 4558 * @vdev_id: unique id identifying the VDEV, generated by the caller 4559 * @tx_bcn_succ_cnt: Total number of beacon frame transmitted successfully 4560 * @tx_bcn_outage_cnt: Total number of failed beacons 4561 */ 4562 typedef struct { 4563 uint32_t vdev_id; 4564 uint32_t tx_bcn_succ_cnt; 4565 uint32_t tx_bcn_outage_cnt; 4566 } wmi_host_bcn_stats; 4567 4568 /** 4569 * struct wmi_host_vdev_extd_stats - VDEV extended stats 4570 * @vdev_id: unique id identifying the VDEV, generated by the caller 4571 * @ppdu_aggr_cnt: No of Aggrs Queued to HW 4572 * @ppdu_noack: No of PPDU's not Acked includes both aggr and nonaggr's 4573 * @mpdu_queued: No of MPDU/Subframes's queued to HW in Aggregates 4574 * @ppdu_nonaggr_cnt: No of NonAggr/MPDU/Subframes's queued to HW 4575 * in Legacy NonAggregates 4576 * @mpdu_sw_requed: No of MPDU/Subframes's SW requeued includes 4577 * both Aggr and NonAggr 4578 * @mpdu_suc_retry: No of MPDU/Subframes's transmitted Successfully 4579 * after Single/mul HW retry 4580 * @mpdu_suc_multitry: No of MPDU/Subframes's transmitted Success 4581 * after Multiple HW retry 4582 * @mpdu_fail_retry: No of MPDU/Subframes's failed transmission 4583 * after Multiple HW retry 4584 * @reserved[13]: for future extensions set to 0x0 4585 */ 4586 typedef struct { 4587 uint32_t vdev_id; 4588 uint32_t ppdu_aggr_cnt; 4589 uint32_t ppdu_noack; 4590 uint32_t mpdu_queued; 4591 uint32_t ppdu_nonaggr_cnt; 4592 uint32_t mpdu_sw_requed; 4593 uint32_t mpdu_suc_retry; 4594 uint32_t mpdu_suc_multitry; 4595 uint32_t mpdu_fail_retry; 4596 uint32_t reserved[13]; 4597 } wmi_host_vdev_extd_stats; 4598 4599 /** 4600 * struct wmi_host_vdev_prb_fils_stats - VDEV probe response fils stats 4601 * @vdev_id: unique id identifying the VDEV, generated by the caller 4602 * @fd_succ_cnt: Total number of successfully transmitted Fils Discovery frames 4603 * @fd_fail_cnt: Toatl number of Fils discovery failed count 4604 * @unsolicited_prb_succ_cnt: Successful unsolicited probe response frames cnt 4605 * @unsolicited_prb_fail_cnt: Failed unsolictied probe response frames cnt 4606 */ 4607 struct wmi_host_vdev_prb_fils_stats { 4608 uint32_t vdev_id; 4609 uint32_t fd_succ_cnt; 4610 uint32_t fd_fail_cnt; 4611 uint32_t unsolicited_prb_succ_cnt; 4612 uint32_t unsolicited_prb_fail_cnt; 4613 }; 4614 4615 /** 4616 * struct wmi_host_vdev_nac_rssi_event - VDEV nac rssi stats 4617 * @vdev_id: unique id identifying the VDEV, generated by the caller 4618 * @last_rssi: rssi 4619 * @avg_rssi: averge rssi 4620 * @rssi_seq_num: rssi sequence number 4621 */ 4622 struct wmi_host_vdev_nac_rssi_event { 4623 uint32_t vdev_id; 4624 uint32_t last_rssi; 4625 uint32_t avg_rssi; 4626 uint32_t rssi_seq_num; 4627 }; 4628 4629 /** 4630 * structure wmi_host_peer_retry_stats - peer retry stats 4631 * @peer_macaddr: peer macaddr 4632 * @retry_counter_wraparnd_ind: wraparound counter indication 4633 * @msdu_success: successfully transmitted msdus 4634 * @msdu_retried: Retried msdus 4635 * @msdu_mul_retried: msdus retried for more than once 4636 * @msdu_failed: msdus failed 4637 * @reserved: for furure extensions 4638 */ 4639 struct wmi_host_peer_retry_stats { 4640 wmi_host_mac_addr peer_macaddr; 4641 uint32_t retry_counter_wraparnd_ind; 4642 uint32_t msdus_success; 4643 uint32_t msdus_retried; 4644 uint32_t msdus_mul_retried; 4645 uint32_t msdus_failed; 4646 uint32_t reserved[4]; 4647 }; 4648 4649 /** 4650 * struct wmi_host_per_chain_rssi_stats - VDEV nac rssi stats 4651 * @vdev_id: unique id identifying the VDEV, generated by the caller 4652 * @rssi_avg_beacon: per chain avg rssi for beacon 4653 * @rssi_avg_data: per chain avg rssi for data 4654 * @peer_macaddr: peer macaddr 4655 */ 4656 struct wmi_host_per_chain_rssi_stats { 4657 uint32_t vdev_id; 4658 int32_t rssi_avg_beacon[WMI_HOST_MAX_CHAINS]; 4659 int32_t rssi_avg_data[WMI_HOST_MAX_CHAINS]; 4660 wmi_host_mac_addr peer_macaddr; 4661 }; 4662 4663 /** 4664 * struct wmi_host_peer_stats - peer stats 4665 * @peer_macaddr: peer MAC address 4666 * @peer_rssi: rssi 4667 * @peer_rssi_seq_num: rssi sequence number 4668 * @peer_tx_rate: last tx data rate used for peer 4669 * @peer_rx_rate: last rx data rate used for peer 4670 * @currentper: Current PER 4671 * @retries: Retries happened during transmission 4672 * @txratecount: Maximum Aggregation Size 4673 * @max4msframelen: Max4msframelen of tx rates used 4674 * @totalsubframes: Total no of subframes 4675 * @txbytes: No of bytes transmitted to the client 4676 * @nobuffs[4]: Packet Loss due to buffer overflows 4677 * @excretries[4]: Packet Loss due to excessive retries 4678 * @peer_rssi_changed: how many times peer's RSSI changed by a 4679 * non-negligible amount 4680 */ 4681 typedef struct { 4682 wmi_host_mac_addr peer_macaddr; 4683 int8_t peer_rssi; 4684 uint32_t peer_rssi_seq_num; 4685 uint32_t peer_tx_rate; 4686 uint32_t peer_rx_rate; 4687 uint32_t currentper; 4688 uint32_t retries; 4689 uint32_t txratecount; 4690 uint32_t max4msframelen; 4691 uint32_t totalsubframes; 4692 uint32_t txbytes; 4693 uint32_t nobuffs[4]; 4694 uint32_t excretries[4]; 4695 uint32_t peer_rssi_changed; 4696 } wmi_host_peer_stats; 4697 4698 typedef struct { 4699 uint32_t dummy; 4700 } wmi_host_bcnflt_stats; 4701 4702 /** 4703 * struct wmi_host_chan_stats - WMI chan stats 4704 * @chan_mhz: Primary channel freq of the channel for which stats are sent 4705 * @sampling_period_us: Time spent on the channel 4706 * @rx_clear_count: Aggregate duration over a sampling period for 4707 * which channel activity was observed 4708 * @tx_duration_us: Accumalation of the TX PPDU duration over a sampling period 4709 * @rx_duration_us: Accumalation of the RX PPDU duration over a sampling period 4710 */ 4711 typedef struct { 4712 uint32_t chan_mhz; 4713 uint32_t sampling_period_us; 4714 uint32_t rx_clear_count; 4715 uint32_t tx_duration_us; 4716 uint32_t rx_duration_us; 4717 } wmi_host_chan_stats; 4718 4719 #ifdef FEATURE_WLAN_TIME_SYNC_FTM 4720 4721 #define FTM_TIME_SYNC_QTIME_PAIR_MAX 32 4722 4723 /** 4724 * struct ftm_time_sync_start_stop_param- Get wlan time sync ftm info 4725 * @vdev_id: vdev id 4726 * @timer_interval: periodicity to trigger wlan time sync strobe 4727 * @num_reads: Number of times to trigger wlabn time sync strobe 4728 * @qtime: ref Qtimer value 4729 * @mac_time: ref Mac timer value 4730 */ 4731 struct ftm_time_sync_start_stop_params { 4732 uint32_t vdev_id; 4733 uint32_t timer_interval; 4734 uint32_t num_reads; 4735 uint64_t qtime; 4736 uint64_t mac_time; 4737 }; 4738 4739 /** 4740 * struct wlan_time_sync_qtime_pair- Get wlan time sync qtime pair value 4741 * @vdev_id: vdev id 4742 * @qtime_initiator: qtimer value of initiator 4743 * @qtime_target: qtimer value of target 4744 */ 4745 struct wlan_time_sync_qtime_pair { 4746 uint64_t qtime_initiator; 4747 uint64_t qtime_target; 4748 }; 4749 4750 /** 4751 * struct ftm_time_sync_offset- Get ftm time sync offset 4752 * @vdev_id: vdev id 4753 * @num_qtime: number of qtime values received 4754 * @pairs: array of qtime pairs 4755 */ 4756 struct ftm_time_sync_offset { 4757 uint32_t vdev_id; 4758 uint32_t num_qtime; 4759 struct wlan_time_sync_qtime_pair pairs[FTM_TIME_SYNC_QTIME_PAIR_MAX]; 4760 }; 4761 #endif 4762 4763 /** 4764 * struct wmi_host_tsf_event_- Get tsf event info 4765 * @vdev_id: vdev id 4766 * @tsf: tsf 4767 * @tsf_low: low 32bit of tsf 4768 * @tsf_high: high 32 bit of tsf 4769 * @qtimer_low: low 32 bits of qtimer 4770 * @qtimer_high: high 32 bits of qtimer 4771 * @tsf_id: TSF ID for the current vdev 4772 * @tsf_id_valid: is TSF valid 4773 * @mac_id: MAC identifier 4774 * @mac_id_valid: is MAC id valid 4775 * @wlan_global_tsf_low: low 32 bits of wlan global tsf 4776 * @wlan_global_tsf_high: high 32 bits of wlan global tsf 4777 */ 4778 struct wmi_host_tsf_event { 4779 uint32_t vdev_id; 4780 uint64_t tsf; 4781 uint32_t tsf_low; 4782 uint32_t tsf_high; 4783 uint32_t qtimer_low; 4784 uint32_t qtimer_high; 4785 uint32_t tsf_id; 4786 uint32_t tsf_id_valid; 4787 uint32_t mac_id; 4788 uint32_t mac_id_valid; 4789 uint32_t wlan_global_tsf_low; 4790 uint32_t wlan_global_tsf_high; 4791 uint32_t tqm_timer_low; 4792 uint32_t tqm_timer_high; 4793 uint32_t use_tqm_timer; 4794 }; 4795 4796 /** 4797 * struct wmi_host_peer_adv_stats - peer adv stats event structure 4798 * @avg_chan_lat_per_ac: average channel latency 4799 * @estimated_air_time_per_ac: Percentage of air time available for each AC 4800 * BIT[0-7] : AC_BE 4801 * BIT[8-15] : AC_BK 4802 * BIT[16-23] : AC_VI 4803 * BIT[24-31] : AC_VO 4804 */ 4805 struct wmi_host_pdev_telemetry_stats { 4806 uint32_t avg_chan_lat_per_ac[WIFI_AC_MAX]; 4807 uint32_t estimated_air_time_per_ac; 4808 }; 4809 4810 #define WMI_EVENT_ID_INVALID 0 4811 /** 4812 * Host based ENUM IDs for events to abstract target enums for event_id 4813 */ 4814 typedef enum { 4815 wmi_service_ready_event_id = 0, 4816 wmi_ready_event_id, 4817 wmi_dbg_msg_event_id, 4818 wmi_scan_event_id, 4819 wmi_echo_event_id, 4820 wmi_update_stats_event_id, 4821 wmi_inst_rssi_stats_event_id, 4822 wmi_vdev_start_resp_event_id, 4823 wmi_vdev_standby_req_event_id, 4824 wmi_vdev_resume_req_event_id, 4825 wmi_vdev_stopped_event_id, 4826 wmi_peer_sta_kickout_event_id, 4827 wmi_host_swba_event_id, 4828 wmi_tbttoffset_update_event_id, 4829 wmi_mgmt_rx_event_id, 4830 wmi_chan_info_event_id, 4831 wmi_phyerr_event_id, 4832 wmi_roam_event_id, 4833 wmi_profile_match, 4834 wmi_debug_print_event_id, 4835 wmi_pdev_qvit_event_id, 4836 wmi_wlan_profile_data_event_id, 4837 wmi_rtt_meas_report_event_id, 4838 wmi_tsf_meas_report_event_id, 4839 wmi_rtt_error_report_event_id, 4840 wmi_rtt_keepalive_event_id, 4841 wmi_oem_cap_event_id, 4842 wmi_oem_meas_report_event_id, 4843 wmi_oem_report_event_id, 4844 wmi_nan_event_id, 4845 wmi_wow_wakeup_host_event_id, 4846 wmi_gtk_offload_status_event_id, 4847 wmi_gtk_rekey_fail_event_id, 4848 wmi_dcs_interference_event_id, 4849 wmi_pdev_tpc_config_event_id, 4850 wmi_csa_handling_event_id, 4851 wmi_gpio_input_event_id, 4852 wmi_peer_ratecode_list_event_id, 4853 wmi_generic_buffer_event_id, 4854 wmi_mcast_buf_release_event_id, 4855 wmi_mcast_list_ageout_event_id, 4856 wmi_vdev_get_keepalive_event_id, 4857 wmi_wds_peer_event_id, 4858 wmi_peer_sta_ps_statechg_event_id, 4859 wmi_pdev_fips_event_id, 4860 wmi_tt_stats_event_id, 4861 wmi_pdev_channel_hopping_event_id, 4862 wmi_pdev_ani_cck_level_event_id, 4863 wmi_pdev_ani_ofdm_level_event_id, 4864 wmi_pdev_reserve_ast_entry_event_id, 4865 wmi_pdev_nfcal_power_event_id, 4866 wmi_pdev_tpc_event_id, 4867 wmi_pdev_get_ast_info_event_id, 4868 wmi_pdev_temperature_event_id, 4869 wmi_pdev_nfcal_power_all_channels_event_id, 4870 wmi_pdev_bss_chan_info_event_id, 4871 wmi_mu_report_event_id, 4872 wmi_pdev_utf_event_id, 4873 wmi_pdev_dump_event_id, 4874 wmi_tx_pause_event_id, 4875 wmi_dfs_radar_event_id, 4876 wmi_pdev_l1ss_track_event_id, 4877 wmi_service_ready_ext_event_id, 4878 wmi_vdev_install_key_complete_event_id, 4879 wmi_vdev_mcc_bcn_intvl_change_req_event_id, 4880 wmi_vdev_tsf_report_event_id, 4881 wmi_peer_info_event_id, 4882 wmi_peer_tx_fail_cnt_thr_event_id, 4883 wmi_peer_estimated_linkspeed_event_id, 4884 wmi_peer_state_event_id, 4885 wmi_offload_bcn_tx_status_event_id, 4886 wmi_offload_prob_resp_tx_status_event_id, 4887 wmi_mgmt_tx_completion_event_id, 4888 wmi_tx_delba_complete_event_id, 4889 wmi_tx_addba_complete_event_id, 4890 wmi_ba_rsp_ssn_event_id, 4891 wmi_aggr_state_trig_event_id, 4892 wmi_roam_synch_event_id, 4893 wmi_roam_synch_frame_event_id, 4894 wmi_p2p_disc_event_id, 4895 wmi_p2p_noa_event_id, 4896 wmi_p2p_lo_stop_event_id, 4897 wmi_vdev_add_macaddr_rx_filter_event_id, 4898 wmi_pdev_resume_event_id, 4899 wmi_d0_wow_disable_ack_event_id, 4900 wmi_wow_initial_wakeup_event_id, 4901 wmi_stats_ext_event_id, 4902 wmi_iface_link_stats_event_id, 4903 wmi_peer_link_stats_event_id, 4904 wmi_radio_link_stats_link, 4905 wmi_update_fw_mem_dump_event_id, 4906 wmi_diag_event_id_log_supported_event_id, 4907 wmi_nlo_match_event_id, 4908 wmi_nlo_scan_complete_event_id, 4909 wmi_apfind_event_id, 4910 wmi_passpoint_match_event_id, 4911 wmi_chatter_pc_query_event_id, 4912 wmi_pdev_ftm_intg_event_id, 4913 wmi_wlan_freq_avoid_event_id, 4914 wmi_thermal_mgmt_event_id, 4915 wmi_diag_container_event_id, 4916 wmi_host_auto_shutdown_event_id, 4917 wmi_update_whal_mib_stats_event_id, 4918 wmi_update_vdev_rate_stats_event_id, 4919 wmi_diag_event_id, 4920 wmi_unit_test_event_id, 4921 wmi_ocb_set_sched_event_id, 4922 wmi_dbg_mesg_flush_complete_event_id, 4923 wmi_rssi_breach_event_id, 4924 wmi_uploadh_event_id, 4925 wmi_captureh_event_id, 4926 wmi_rfkill_state_change_event_id, 4927 wmi_tdls_peer_event_id, 4928 wmi_batch_scan_enabled_event_id, 4929 wmi_batch_scan_result_event_id, 4930 wmi_lpi_result_event_id, 4931 wmi_lpi_status_event_id, 4932 wmi_lpi_handoff_event_id, 4933 wmi_extscan_start_stop_event_id, 4934 wmi_extscan_operation_event_id, 4935 wmi_extscan_table_usage_event_id, 4936 wmi_extscan_cached_results_event_id, 4937 wmi_extscan_wlan_change_results_event_id, 4938 wmi_extscan_hotlist_match_event_id, 4939 wmi_extscan_capabilities_event_id, 4940 wmi_extscan_hotlist_ssid_match_event_id, 4941 wmi_mdns_stats_event_id, 4942 wmi_sap_ofl_add_sta_event_id, 4943 wmi_sap_ofl_del_sta_event_id, 4944 wmi_ocb_set_config_resp_event_id, 4945 wmi_ocb_get_tsf_timer_resp_event_id, 4946 wmi_dcc_get_stats_resp_event_id, 4947 wmi_dcc_update_ndl_resp_event_id, 4948 wmi_dcc_stats_event_id, 4949 wmi_soc_set_hw_mode_resp_event_id, 4950 wmi_soc_hw_mode_transition_event_id, 4951 wmi_soc_set_dual_mac_config_resp_event_id, 4952 wmi_tx_data_traffic_ctrl_event_id, 4953 wmi_peer_tx_mu_txmit_count_event_id, 4954 wmi_peer_gid_userpos_list_event_id, 4955 wmi_pdev_check_cal_version_event_id, 4956 wmi_atf_peer_stats_event_id, 4957 wmi_peer_delete_response_event_id, 4958 wmi_peer_delete_all_response_event_id, 4959 wmi_pdev_csa_switch_count_status_event_id, 4960 wmi_reg_chan_list_cc_event_id, 4961 wmi_reg_chan_list_cc_ext_event_id, 4962 #ifdef CONFIG_AFC_SUPPORT 4963 wmi_afc_event_id, 4964 #endif 4965 wmi_offchan_data_tx_completion_event, 4966 wmi_dfs_cac_complete_id, 4967 wmi_dfs_radar_detection_event_id, 4968 wmi_ext_tbttoffset_update_event_id, 4969 wmi_11d_new_country_event_id, 4970 wmi_get_arp_stats_req_id, 4971 wmi_service_available_event_id, 4972 wmi_update_rcpi_event_id, 4973 wmi_pdev_wds_entry_list_event_id, 4974 wmi_ndp_initiator_rsp_event_id, 4975 wmi_ndp_indication_event_id, 4976 wmi_ndp_confirm_event_id, 4977 wmi_ndp_responder_rsp_event_id, 4978 wmi_ndp_end_indication_event_id, 4979 wmi_ndp_end_rsp_event_id, 4980 wmi_nan_dmesg_event_id, 4981 wmi_ndl_schedule_update_event_id, 4982 wmi_ndp_event_id, 4983 wmi_oem_response_event_id, 4984 wmi_peer_stats_info_event_id, 4985 wmi_pdev_chip_power_stats_event_id, 4986 wmi_ap_ps_egap_info_event_id, 4987 wmi_peer_assoc_conf_event_id, 4988 wmi_vdev_delete_resp_event_id, 4989 wmi_apf_capability_info_event_id, 4990 wmi_vdev_encrypt_decrypt_data_rsp_event_id, 4991 wmi_report_rx_aggr_failure_event_id, 4992 wmi_pdev_chip_pwr_save_failure_detect_event_id, 4993 wmi_peer_antdiv_info_event_id, 4994 wmi_pdev_set_hw_mode_rsp_event_id, 4995 wmi_pdev_hw_mode_transition_event_id, 4996 wmi_pdev_set_mac_config_resp_event_id, 4997 wmi_coex_bt_activity_event_id, 4998 wmi_mgmt_tx_bundle_completion_event_id, 4999 wmi_radio_tx_power_level_stats_event_id, 5000 wmi_report_stats_event_id, 5001 wmi_dma_buf_release_event_id, 5002 wmi_sap_obss_detection_report_event_id, 5003 wmi_obss_color_collision_report_event_id, 5004 wmi_host_swfda_event_id, 5005 wmi_sar_get_limits_event_id, 5006 wmi_pdev_div_rssi_antid_event_id, 5007 #if defined(WLAN_DFS_PARTIAL_OFFLOAD) && defined(HOST_DFS_SPOOF_TEST) 5008 wmi_host_dfs_status_check_event_id, 5009 #endif 5010 #ifdef WLAN_SUPPORT_TWT 5011 wmi_twt_enable_complete_event_id, 5012 wmi_twt_disable_complete_event_id, 5013 wmi_twt_add_dialog_complete_event_id, 5014 wmi_twt_del_dialog_complete_event_id, 5015 wmi_twt_pause_dialog_complete_event_id, 5016 wmi_twt_resume_dialog_complete_event_id, 5017 wmi_twt_nudge_dialog_complete_event_id, 5018 wmi_twt_session_stats_event_id, 5019 wmi_twt_notify_event_id, 5020 wmi_twt_ack_complete_event_id, 5021 #endif 5022 wmi_apf_get_vdev_work_memory_resp_event_id, 5023 wmi_roam_scan_stats_event_id, 5024 wmi_vdev_ocac_complete_event_id, 5025 5026 #ifdef OL_ATH_SMART_LOGGING 5027 wmi_debug_fatal_condition_eventid, 5028 #endif /* OL_ATH_SMART_LOGGING */ 5029 wmi_wlan_sar2_result_event_id, 5030 wmi_esp_estimate_event_id, 5031 wmi_pdev_ctl_failsafe_check_event_id, 5032 wmi_vdev_bcn_reception_stats_event_id, 5033 wmi_roam_denylist_event_id, 5034 wmi_wlm_stats_event_id, 5035 wmi_peer_cfr_capture_event_id, 5036 wmi_pdev_cold_boot_cal_event_id, 5037 wmi_vdev_get_mws_coex_state_eventid, 5038 wmi_vdev_get_mws_coex_dpwb_state_eventid, 5039 wmi_vdev_get_mws_coex_tdm_state_eventid, 5040 wmi_vdev_get_mws_coex_idrx_state_eventid, 5041 wmi_vdev_get_mws_coex_antenna_sharing_state_eventid, 5042 #ifdef WLAN_FEATURE_INTEROP_ISSUES_AP 5043 wmi_pdev_interop_issues_ap_event_id, 5044 #endif 5045 wmi_coex_report_antenna_isolation_event_id, 5046 wmi_chan_rf_characterization_info_event_id, 5047 wmi_roam_auth_offload_event_id, 5048 wmi_service_ready_ext2_event_id, 5049 wmi_get_elna_bypass_event_id, 5050 wmi_motion_det_host_eventid, 5051 wmi_motion_det_base_line_host_eventid, 5052 wmi_get_ani_level_event_id, 5053 wmi_peer_tx_pn_response_event_id, 5054 wmi_roam_stats_event_id, 5055 wmi_oem_data_event_id, 5056 wmi_mgmt_offload_data_event_id, 5057 wmi_pdev_multi_vdev_restart_response_event_id, 5058 wmi_roam_pmkid_request_event_id, 5059 #ifdef FEATURE_WLAN_TIME_SYNC_FTM 5060 wmi_wlan_time_sync_ftm_start_stop_event_id, 5061 wmi_wlan_time_sync_q_initiator_target_offset_eventid, 5062 #endif 5063 wmi_roam_scan_chan_list_id, 5064 wmi_muedca_params_config_eventid, 5065 wmi_pdev_sscan_fw_param_eventid, 5066 wmi_roam_cap_report_event_id, 5067 wmi_vdev_bcn_latency_event_id, 5068 wmi_vdev_disconnect_event_id, 5069 wmi_peer_create_conf_event_id, 5070 wmi_pdev_cp_fwstats_eventid, 5071 wmi_pdev_halphy_fwstats_eventid, 5072 wmi_vdev_send_big_data_p2_eventid, 5073 wmi_pdev_get_dpd_status_event_id, 5074 #ifdef WLAN_FEATURE_PKT_CAPTURE_V2 5075 wmi_vdev_smart_monitor_event_id, 5076 #endif 5077 wmi_pdev_get_halphy_cal_status_event_id, 5078 wmi_pdev_set_halphy_cal_event_id, 5079 wmi_pdev_aoa_phasedelta_event_id, 5080 #ifdef WLAN_MGMT_RX_REO_SUPPORT 5081 wmi_mgmt_rx_fw_consumed_eventid, 5082 #endif 5083 #ifdef WLAN_FEATURE_11BE_MLO 5084 wmi_mlo_setup_complete_event_id, 5085 wmi_mlo_teardown_complete_event_id, 5086 wmi_mlo_link_set_active_resp_eventid, 5087 #endif 5088 wmi_pdev_fips_extend_event_id, 5089 wmi_roam_frame_event_id, 5090 #ifdef WLAN_FEATURE_DYNAMIC_MAC_ADDR_UPDATE 5091 wmi_vdev_update_mac_addr_conf_eventid, 5092 #endif 5093 #ifdef WLAN_FEATURE_11BE_MLO 5094 wmi_vdev_quiet_offload_eventid, 5095 #endif 5096 #ifdef WLAN_FEATURE_MCC_QUOTA 5097 wmi_resmgr_chan_time_quota_changed_eventid, 5098 #endif 5099 wmi_peer_rx_pn_response_event_id, 5100 wmi_extract_pktlog_decode_info_eventid, 5101 #ifdef QCA_RSSI_DB2DBM 5102 wmi_pdev_rssi_dbm_conversion_params_info_eventid, 5103 #endif 5104 #ifdef MULTI_CLIENT_LL_SUPPORT 5105 wmi_vdev_latency_event_id, 5106 #endif 5107 #if defined(WIFI_POS_CONVERGED) && defined(WLAN_FEATURE_RTT_11AZ_SUPPORT) 5108 wmi_rtt_pasn_peer_create_req_eventid, 5109 wmi_rtt_pasn_peer_delete_eventid, 5110 #endif 5111 #ifdef WLAN_VENDOR_HANDOFF_CONTROL 5112 wmi_get_roam_vendor_control_param_event_id, 5113 #endif 5114 #ifdef WLAN_FEATURE_DBAM_CONFIG 5115 wmi_coex_dbam_complete_event_id, 5116 #endif 5117 wmi_spectral_capabilities_eventid, 5118 #ifdef WLAN_FEATURE_COAP 5119 wmi_wow_coap_buf_info_eventid, 5120 #endif 5121 #ifdef HEALTH_MON_SUPPORT 5122 wmi_extract_health_mon_init_done_info_eventid, 5123 #endif /* HEALTH_MON_SUPPORT */ 5124 wmi_events_max, 5125 } wmi_conv_event_id; 5126 5127 #define WMI_UNAVAILABLE_PARAM 0 5128 /** 5129 * Host based ENUM IDs for PDEV params to abstract target enums 5130 */ 5131 typedef enum { 5132 wmi_pdev_param_tx_chain_mask = 0, 5133 wmi_pdev_param_rx_chain_mask, 5134 wmi_pdev_param_txpower_limit2g, 5135 wmi_pdev_param_txpower_limit5g, 5136 wmi_pdev_param_txpower_scale, 5137 wmi_pdev_param_beacon_gen_mode, 5138 wmi_pdev_param_beacon_tx_mode, 5139 wmi_pdev_param_resmgr_offchan_mode, 5140 wmi_pdev_param_protection_mode, 5141 wmi_pdev_param_dynamic_bw, 5142 wmi_pdev_param_non_agg_sw_retry_th, 5143 wmi_pdev_param_agg_sw_retry_th, 5144 wmi_pdev_param_sta_kickout_th, 5145 wmi_pdev_param_ac_aggrsize_scaling, 5146 wmi_pdev_param_ltr_enable, 5147 wmi_pdev_param_ltr_ac_latency_be, 5148 wmi_pdev_param_ltr_ac_latency_bk, 5149 wmi_pdev_param_ltr_ac_latency_vi, 5150 wmi_pdev_param_ltr_ac_latency_vo, 5151 wmi_pdev_param_ltr_ac_latency_timeout, 5152 wmi_pdev_param_ltr_sleep_override, 5153 wmi_pdev_param_ltr_rx_override, 5154 wmi_pdev_param_ltr_tx_activity_timeout, 5155 wmi_pdev_param_l1ss_enable, 5156 wmi_pdev_param_dsleep_enable, 5157 wmi_pdev_param_pcielp_txbuf_flush, 5158 wmi_pdev_param_pcielp_txbuf_watermark, 5159 wmi_pdev_param_pcielp_txbuf_tmo_en, 5160 wmi_pdev_param_pcielp_txbuf_tmo_value, 5161 wmi_pdev_param_pdev_stats_update_period, 5162 wmi_pdev_param_vdev_stats_update_period, 5163 wmi_pdev_param_peer_stats_update_period, 5164 wmi_pdev_param_bcnflt_stats_update_period, 5165 wmi_pdev_param_pmf_qos, 5166 wmi_pdev_param_arp_ac_override, 5167 wmi_pdev_param_dcs, 5168 wmi_pdev_param_ani_enable, 5169 wmi_pdev_param_ani_poll_period, 5170 wmi_pdev_param_ani_listen_period, 5171 wmi_pdev_param_ani_ofdm_level, 5172 wmi_pdev_param_ani_cck_level, 5173 wmi_pdev_param_dyntxchain, 5174 wmi_pdev_param_proxy_sta, 5175 wmi_pdev_param_idle_ps_config, 5176 wmi_pdev_param_power_gating_sleep, 5177 wmi_pdev_param_aggr_burst, 5178 wmi_pdev_param_rx_decap_mode, 5179 wmi_pdev_param_fast_channel_reset, 5180 wmi_pdev_param_burst_dur, 5181 wmi_pdev_param_burst_enable, 5182 wmi_pdev_param_smart_antenna_default_antenna, 5183 wmi_pdev_param_igmpmld_override, 5184 wmi_pdev_param_igmpmld_tid, 5185 wmi_pdev_param_antenna_gain, 5186 wmi_pdev_param_rx_filter, 5187 wmi_pdev_set_mcast_to_ucast_tid, 5188 wmi_pdev_param_proxy_sta_mode, 5189 wmi_pdev_param_set_mcast2ucast_mode, 5190 wmi_pdev_param_set_mcast2ucast_buffer, 5191 wmi_pdev_param_remove_mcast2ucast_buffer, 5192 wmi_pdev_peer_sta_ps_statechg_enable, 5193 wmi_pdev_param_block_interbss, 5194 wmi_pdev_param_set_disable_reset_cmdid, 5195 wmi_pdev_param_set_msdu_ttl_cmdid, 5196 wmi_pdev_param_set_ppdu_duration_cmdid, 5197 wmi_pdev_param_txbf_sound_period_cmdid, 5198 wmi_pdev_param_set_promisc_mode_cmdid, 5199 wmi_pdev_param_set_burst_mode_cmdid, 5200 wmi_pdev_param_en_stats, 5201 wmi_pdev_param_mu_group_policy, 5202 wmi_pdev_param_noise_detection, 5203 wmi_pdev_param_noise_threshold, 5204 wmi_pdev_param_dpd_enable, 5205 wmi_pdev_param_set_mcast_bcast_echo, 5206 wmi_pdev_param_atf_strict_sch, 5207 wmi_pdev_param_atf_sched_duration, 5208 wmi_pdev_param_ant_plzn, 5209 wmi_pdev_param_mgmt_retry_limit, 5210 wmi_pdev_param_sensitivity_level, 5211 wmi_pdev_param_signed_txpower_2g, 5212 wmi_pdev_param_signed_txpower_5g, 5213 wmi_pdev_param_enable_per_tid_amsdu, 5214 wmi_pdev_param_enable_per_tid_ampdu, 5215 wmi_pdev_param_cca_threshold, 5216 wmi_pdev_param_rts_fixed_rate, 5217 wmi_pdev_param_cal_period, 5218 wmi_pdev_param_pdev_reset, 5219 wmi_pdev_param_wapi_mbssid_offset, 5220 wmi_pdev_param_arp_srcaddr, 5221 wmi_pdev_param_arp_dstaddr, 5222 wmi_pdev_param_txpower_decr_db, 5223 wmi_pdev_param_rx_batchmode, 5224 wmi_pdev_param_packet_aggr_delay, 5225 wmi_pdev_param_atf_obss_noise_sch, 5226 wmi_pdev_param_atf_obss_noise_scaling_factor, 5227 wmi_pdev_param_cust_txpower_scale, 5228 wmi_pdev_param_atf_dynamic_enable, 5229 wmi_pdev_param_atf_ssid_group_policy, 5230 wmi_pdev_param_rfkill_enable, 5231 wmi_pdev_param_hw_rfkill_config, 5232 wmi_pdev_param_low_power_rf_enable, 5233 wmi_pdev_param_l1ss_track, 5234 wmi_pdev_param_hyst_en, 5235 wmi_pdev_param_power_collapse_enable, 5236 wmi_pdev_param_led_sys_state, 5237 wmi_pdev_param_led_enable, 5238 wmi_pdev_param_audio_over_wlan_latency, 5239 wmi_pdev_param_audio_over_wlan_enable, 5240 wmi_pdev_param_whal_mib_stats_update_enable, 5241 wmi_pdev_param_vdev_rate_stats_update_period, 5242 wmi_pdev_param_cts_cbw, 5243 wmi_pdev_param_wnts_config, 5244 wmi_pdev_param_adaptive_early_rx_enable, 5245 wmi_pdev_param_adaptive_early_rx_min_sleep_slop, 5246 wmi_pdev_param_adaptive_early_rx_inc_dec_step, 5247 wmi_pdev_param_early_rx_fix_sleep_slop, 5248 wmi_pdev_param_bmiss_based_adaptive_bto_enable, 5249 wmi_pdev_param_bmiss_bto_min_bcn_timeout, 5250 wmi_pdev_param_bmiss_bto_inc_dec_step, 5251 wmi_pdev_param_bto_fix_bcn_timeout, 5252 wmi_pdev_param_ce_based_adaptive_bto_enable, 5253 wmi_pdev_param_ce_bto_combo_ce_value, 5254 wmi_pdev_param_tx_chain_mask_2g, 5255 wmi_pdev_param_rx_chain_mask_2g, 5256 wmi_pdev_param_tx_chain_mask_5g, 5257 wmi_pdev_param_rx_chain_mask_5g, 5258 wmi_pdev_param_tx_chain_mask_cck, 5259 wmi_pdev_param_tx_chain_mask_1ss, 5260 wmi_pdev_param_enable_btcoex, 5261 wmi_pdev_param_atf_peer_stats, 5262 wmi_pdev_param_btcoex_cfg, 5263 wmi_pdev_param_mesh_mcast_enable, 5264 wmi_pdev_param_tx_ack_timeout, 5265 wmi_pdev_param_soft_tx_chain_mask, 5266 wmi_pdev_param_cck_tx_enable, 5267 wmi_pdev_param_esp_indication_period, 5268 wmi_pdev_param_antenna_gain_half_db, 5269 wmi_pdev_param_ru26_allowed, 5270 wmi_pdev_param_esp_ba_window, 5271 wmi_pdev_param_esp_airtime_fraction, 5272 wmi_pdev_param_esp_ppdu_duration, 5273 wmi_pdev_param_use_nol, 5274 wmi_pdev_param_enable_peer_retry_stats, 5275 wmi_pdev_param_ul_trig_int, 5276 wmi_pdev_param_sub_channel_marking, 5277 wmi_pdev_param_ul_ppdu_duration, 5278 wmi_pdev_param_equal_ru_allocation_enable, 5279 wmi_pdev_param_per_peer_prd_cfr_enable, 5280 wmi_pdev_param_nav_override_config, 5281 wmi_pdev_param_set_mgmt_ttl, 5282 wmi_pdev_param_set_prb_rsp_ttl, 5283 wmi_pdev_param_set_mu_ppdu_duration, 5284 wmi_pdev_param_set_tbtt_ctrl, 5285 wmi_pdev_param_set_cmd_obss_pd_threshold, 5286 wmi_pdev_param_set_cmd_obss_pd_per_ac, 5287 wmi_pdev_param_set_cong_ctrl_max_msdus, 5288 wmi_pdev_param_enable_fw_dynamic_he_edca, 5289 wmi_pdev_param_enable_srp, 5290 wmi_pdev_param_enable_sr_prohibit, 5291 wmi_pdev_param_sr_trigger_margin, 5292 wmi_pdev_param_pream_punct_bw, 5293 wmi_pdev_param_enable_mbssid_ctrl_frame, 5294 wmi_pdev_param_set_mesh_params, 5295 wmi_pdev_param_mpd_userpd_ssr, 5296 wmi_pdev_param_low_latency_mode, 5297 wmi_pdev_param_scan_radio_tx_on_dfs, 5298 wmi_pdev_param_en_probe_all_bw, 5299 wmi_pdev_param_obss_min_duration_check_for_sr, 5300 wmi_pdev_param_truncate_sr, 5301 wmi_pdev_param_ctrl_frame_obss_pd_threshold, 5302 wmi_pdev_param_rate_upper_cap, 5303 wmi_pdev_param_rate_retry_mcs_drop, 5304 wmi_pdev_param_mcs_probe_intvl, 5305 wmi_pdev_param_nss_probe_intvl, 5306 wmi_pdev_param_dtim_synth, 5307 wmi_pdev_param_1ch_dtim_optimized_chain_selection, 5308 wmi_pdev_param_tx_sch_delay, 5309 wmi_pdev_param_en_update_scram_seed, 5310 wmi_pdev_param_secondary_retry_enable, 5311 wmi_pdev_param_set_sap_xlna_bypass, 5312 wmi_pdev_param_set_dfs_chan_ageout_time, 5313 wmi_pdev_param_pdev_stats_tx_xretry_ext, 5314 wmi_pdev_param_smart_chainmask_scheme, 5315 wmi_pdev_param_alternative_chainmask_scheme, 5316 wmi_pdev_param_enable_rts_sifs_bursting, 5317 wmi_pdev_param_max_mpdus_in_ampdu, 5318 wmi_pdev_param_set_iot_pattern, 5319 wmi_pdev_param_mwscoex_scc_chavd_delay, 5320 wmi_pdev_param_mwscoex_pcc_chavd_delay, 5321 wmi_pdev_param_mwscoex_set_5gnr_pwr_limit, 5322 wmi_pdev_param_mwscoex_4g_allow_quick_ftdm, 5323 wmi_pdev_param_fast_pwr_transition, 5324 wmi_pdev_auto_detect_power_failure, 5325 wmi_pdev_param_gcmp_support_enable, 5326 wmi_pdev_param_abg_mode_tx_chain_num, 5327 wmi_pdev_param_peer_stats_info_enable, 5328 wmi_pdev_param_enable_cck_txfir_override, 5329 wmi_pdev_param_twt_ac_config, 5330 wmi_pdev_param_pcie_hw_ilp, 5331 wmi_pdev_param_disable_hw_assist, 5332 wmi_pdev_param_ant_div_usrcfg, 5333 wmi_pdev_param_ctrl_retry_limit, 5334 wmi_pdev_param_propagation_delay, 5335 wmi_pdev_param_ena_ant_div, 5336 wmi_pdev_param_force_chain_ant, 5337 wmi_pdev_param_ant_div_selftest, 5338 wmi_pdev_param_ant_div_selftest_intvl, 5339 wmi_pdev_param_data_stall_detect_enable, 5340 wmi_pdev_param_cts2self_for_p2p_go_config, 5341 wmi_pdev_param_txpower_reason_sar, 5342 wmi_pdev_param_stats_observation_period, 5343 wmi_pdev_param_max, 5344 } wmi_conv_pdev_params_id; 5345 5346 5347 /** 5348 * Host based ENUM IDs for VDEV params to abstract target enums 5349 */ 5350 typedef enum { 5351 wmi_vdev_param_rts_threshold = 0, 5352 wmi_vdev_param_fragmentation_threshold, 5353 wmi_vdev_param_beacon_interval, 5354 wmi_vdev_param_listen_interval, 5355 wmi_vdev_param_multicast_rate, 5356 wmi_vdev_param_mgmt_tx_rate, 5357 wmi_vdev_param_slot_time, 5358 wmi_vdev_param_preamble, 5359 wmi_vdev_param_swba_time, 5360 wmi_vdev_stats_update_period, 5361 wmi_vdev_pwrsave_ageout_time, 5362 wmi_vdev_host_swba_interval, 5363 wmi_vdev_param_dtim_period, 5364 wmi_vdev_oc_scheduler_air_time_limit, 5365 wmi_vdev_param_wds, 5366 wmi_vdev_param_atim_window, 5367 wmi_vdev_param_bmiss_count_max, 5368 wmi_vdev_param_bmiss_first_bcnt, 5369 wmi_vdev_param_bmiss_final_bcnt, 5370 wmi_vdev_param_feature_wmm, 5371 wmi_vdev_param_chwidth, 5372 wmi_vdev_param_chextoffset, 5373 wmi_vdev_param_disable_htprotection, 5374 wmi_vdev_param_sta_quickkickout, 5375 wmi_vdev_param_mgmt_rate, 5376 wmi_vdev_param_protection_mode, 5377 wmi_vdev_param_fixed_rate, 5378 wmi_vdev_param_sgi, 5379 wmi_vdev_param_ldpc, 5380 wmi_vdev_param_tx_stbc, 5381 wmi_vdev_param_rx_stbc, 5382 wmi_vdev_param_intra_bss_fwd, 5383 wmi_vdev_param_def_keyid, 5384 wmi_vdev_param_nss, 5385 wmi_vdev_param_bcast_data_rate, 5386 wmi_vdev_param_mcast_data_rate, 5387 wmi_vdev_param_mcast_indicate, 5388 wmi_vdev_param_dhcp_indicate, 5389 wmi_vdev_param_unknown_dest_indicate, 5390 wmi_vdev_param_ap_keepalive_min_idle_inactive_time_secs, 5391 wmi_vdev_param_ap_keepalive_max_idle_inactive_time_secs, 5392 wmi_vdev_param_ap_keepalive_max_unresponsive_time_secs, 5393 wmi_vdev_param_ap_enable_nawds, 5394 wmi_vdev_param_mcast2ucast_set, 5395 wmi_vdev_param_enable_rtscts, 5396 wmi_vdev_param_rc_num_retries, 5397 wmi_vdev_param_txbf, 5398 wmi_vdev_param_packet_powersave, 5399 wmi_vdev_param_drop_unencry, 5400 wmi_vdev_param_tx_encap_type, 5401 wmi_vdev_param_ap_detect_out_of_sync_sleeping_sta_time_secs, 5402 wmi_vdev_param_cabq_maxdur, 5403 wmi_vdev_param_mfptest_set, 5404 wmi_vdev_param_rts_fixed_rate, 5405 wmi_vdev_param_vht_sgimask, 5406 wmi_vdev_param_vht80_ratemask, 5407 wmi_vdev_param_early_rx_adjust_enable, 5408 wmi_vdev_param_early_rx_tgt_bmiss_num, 5409 wmi_vdev_param_early_rx_bmiss_sample_cycle, 5410 wmi_vdev_param_early_rx_slop_step, 5411 wmi_vdev_param_early_rx_init_slop, 5412 wmi_vdev_param_early_rx_adjust_pause, 5413 wmi_vdev_param_proxy_sta, 5414 wmi_vdev_param_meru_vc, 5415 wmi_vdev_param_rx_decap_type, 5416 wmi_vdev_param_bw_nss_ratemask, 5417 wmi_vdev_param_sensor_ap, 5418 wmi_vdev_param_beacon_rate, 5419 wmi_vdev_param_dtim_enable_cts, 5420 wmi_vdev_param_sta_kickout, 5421 wmi_vdev_param_tx_pwrlimit, 5422 wmi_vdev_param_snr_num_for_cal, 5423 wmi_vdev_param_roam_fw_offload, 5424 wmi_vdev_param_enable_rmc, 5425 wmi_vdev_param_ibss_max_bcn_lost_ms, 5426 wmi_vdev_param_max_rate, 5427 wmi_vdev_param_early_rx_drift_sample, 5428 wmi_vdev_param_set_ibss_tx_fail_cnt_thr, 5429 wmi_vdev_param_ebt_resync_timeout, 5430 wmi_vdev_param_aggr_trig_event_enable, 5431 wmi_vdev_param_is_ibss_power_save_allowed, 5432 wmi_vdev_param_is_power_collapse_allowed, 5433 wmi_vdev_param_is_awake_on_txrx_enabled, 5434 wmi_vdev_param_inactivity_cnt, 5435 wmi_vdev_param_txsp_end_inactivity_time_ms, 5436 wmi_vdev_param_dtim_policy, 5437 wmi_vdev_param_ibss_ps_warmup_time_secs, 5438 wmi_vdev_param_ibss_ps_1rx_chain_in_atim_window_enable, 5439 wmi_vdev_param_rx_leak_window, 5440 wmi_vdev_param_stats_avg_factor, 5441 wmi_vdev_param_disconnect_th, 5442 wmi_vdev_param_rtscts_rate, 5443 wmi_vdev_param_mcc_rtscts_protection_enable, 5444 wmi_vdev_param_mcc_broadcast_probe_enable, 5445 wmi_vdev_param_capabilities, 5446 wmi_vdev_param_mgmt_tx_power, 5447 wmi_vdev_param_atf_ssid_sched_policy, 5448 wmi_vdev_param_disable_dyn_bw_rts, 5449 wmi_vdev_param_ampdu_subframe_size_per_ac, 5450 wmi_vdev_param_he_dcm_enable, 5451 wmi_vdev_param_he_bss_color, 5452 wmi_vdev_param_he_range_ext_enable, 5453 wmi_vdev_param_set_hemu_mode, 5454 wmi_vdev_param_set_he_ltf, 5455 wmi_vdev_param_set_heop, 5456 wmi_vdev_param_disable_cabq, 5457 wmi_vdev_param_rate_dropdown_bmap, 5458 wmi_vdev_param_tx_power, 5459 wmi_vdev_param_set_ba_mode, 5460 wmi_vdev_param_autorate_misc_cfg, 5461 wmi_vdev_param_amsdu_subframe_size_per_ac, 5462 wmi_vdev_param_set_he_sounding_mode, 5463 wmi_vdev_param_sifs_trigger_rate, 5464 wmi_vdev_param_ul_shortgi, 5465 wmi_vdev_param_ul_he_ltf, 5466 wmi_vdev_param_ul_nss, 5467 wmi_vdev_param_ul_ppdu_bw, 5468 wmi_vdev_param_ul_ldpc, 5469 wmi_vdev_param_ul_stbc, 5470 wmi_vdev_param_ul_fixed_rate, 5471 wmi_vdev_param_rawmode_open_war, 5472 wmi_vdev_param_max_mtu_size, 5473 wmi_vdev_param_mcast_rc_stale_period, 5474 wmi_vdev_param_enable_multi_group_key, 5475 wmi_vdev_param_max_group_keys, 5476 wmi_vdev_param_enable_mcast_rc, 5477 wmi_vdev_param_6ghz_params, 5478 wmi_vdev_param_enable_disable_roam_reason_vsie, 5479 wmi_vdev_param_set_cmd_obss_pd_threshold, 5480 wmi_vdev_param_set_cmd_obss_pd_per_ac, 5481 wmi_vdev_param_enable_srp, 5482 wmi_vdev_param_nan_config_features, 5483 wmi_vdev_param_enable_disable_rtt_responder_role, 5484 wmi_vdev_param_enable_disable_rtt_initiator_role, 5485 wmi_vdev_param_mcast_steer, 5486 #ifdef WLAN_FEATURE_11BE 5487 wmi_vdev_param_set_ehtop, 5488 wmi_vdev_param_set_eht_mu_mode, 5489 wmi_vdev_param_set_eht_puncturing_mode, 5490 wmi_vdev_param_set_eht_ltf, 5491 wmi_vdev_param_set_ul_eht_ltf, 5492 wmi_vdev_param_set_eht_dcm, 5493 wmi_vdev_param_set_eht_range_ext, 5494 wmi_vdev_param_set_non_data_eht_range_ext, 5495 #endif 5496 #ifdef MULTI_CLIENT_LL_SUPPORT 5497 wmi_vdev_param_set_normal_latency_flags_config, 5498 wmi_vdev_param_set_xr_latency_flags_config, 5499 wmi_vdev_param_set_low_latency_flags_config, 5500 wmi_vdev_param_set_ultra_low_latency_flags_config, 5501 wmi_vdev_param_set_normal_latency_ul_dl_config, 5502 wmi_vdev_param_set_xr_latency_ul_dl_config, 5503 wmi_vdev_param_set_low_latency_ul_dl_config, 5504 wmi_vdev_param_set_ultra_low_latency_ul_dl_config, 5505 wmi_vdev_param_set_default_ll_config, 5506 wmi_vdev_param_set_multi_client_ll_feature_config, 5507 #endif 5508 wmi_vdev_param_set_traffic_config, 5509 wmi_vdev_param_he_range_ext, 5510 wmi_vdev_param_non_data_he_range_ext, 5511 wmi_vdev_param_ndp_inactivity_timeout, 5512 wmi_vdev_param_ndp_keepalive_timeout, 5513 wmi_vdev_param_final_bmiss_time_sec, 5514 wmi_vdev_param_final_bmiss_time_wow_sec, 5515 wmi_vdev_param_ap_keepalive_max_idle_inactive_secs, 5516 wmi_vdev_param_per_band_mgmt_tx_rate, 5517 wmi_vdev_param_max_li_of_moddtim, 5518 wmi_vdev_param_moddtim_cnt, 5519 wmi_vdev_param_max_li_of_moddtim_ms, 5520 wmi_vdev_param_dyndtim_cnt, 5521 wmi_vdev_param_wmm_txop_enable, 5522 wmi_vdev_param_enable_bcast_probe_response, 5523 wmi_vdev_param_fils_max_channel_guard_time, 5524 wmi_vdev_param_probe_delay, 5525 wmi_vdev_param_repeat_probe_time, 5526 wmi_vdev_param_enable_disable_oce_features, 5527 wmi_vdev_param_enable_disable_nan_config_features, 5528 wmi_vdev_param_rsn_capability, 5529 wmi_vdev_param_smps_intolerant, 5530 wmi_vdev_param_abg_mode_tx_chain_num, 5531 wmi_vdev_param_nth_beacon_to_host, 5532 wmi_vdev_param_prohibit_data_mgmt, 5533 wmi_vdev_param_skip_roam_eapol_4way_handshake, 5534 wmi_vdev_param_skip_sae_roam_4way_handshake, 5535 wmi_vdev_param_roam_11kv_ctrl, 5536 wmi_vdev_param_disable_noa_p2p_go, 5537 wmi_vdev_param_packet_capture_mode, 5538 wmi_vdev_param_smart_monitor_config, 5539 wmi_vdev_param_force_dtim_cnt, 5540 wmi_vdev_param_sho_config, 5541 wmi_vdev_param_gtx_enable, 5542 wmi_vdev_param_mu_edca_fw_update_en, 5543 wmi_vdev_param_enable_disable_rtt_initiator_random_mac, 5544 wmi_vdev_param_allow_nan_initial_discovery_of_mp0_cluster, 5545 wmi_vdev_param_txpower_scale_decr_db, 5546 wmi_vdev_param_txpower_scale, 5547 wmi_vdev_param_agg_sw_retry_th, 5548 wmi_vdev_param_obsspd, 5549 wmi_vdev_param_multi_client_ll_feature_configuration, 5550 wmi_vdev_param_normal_latency_flags_configuration, 5551 wmi_vdev_param_xr_latency_flags_configuration, 5552 wmi_vdev_param_low_latency_flags_configuration, 5553 wmi_vdev_param_ultra_low_latency_flags_configuration, 5554 wmi_vdev_param_normal_latency_ul_dl_configuration, 5555 wmi_vdev_param_xr_latency_ul_dl_configuration, 5556 wmi_vdev_param_low_latency_ul_dl_configuration, 5557 wmi_vdev_param_ultra_low_latency_ul_dl_configuration, 5558 wmi_vdev_param_default_latency_level_configuration, 5559 wmi_vdev_param_amsdu_aggregation_size_optimization, 5560 wmi_vdev_param_non_agg_sw_retry_th, 5561 } wmi_conv_vdev_param_id; 5562 5563 /** 5564 * Host based ENUM IDs for service bits to abstract target enums 5565 */ 5566 typedef enum { 5567 wmi_service_beacon_offload = 0, 5568 wmi_service_scan_offload, 5569 wmi_service_roam_offload, 5570 wmi_service_bcn_miss_offload, 5571 wmi_service_sta_pwrsave, 5572 wmi_service_sta_advanced_pwrsave, 5573 wmi_service_ap_uapsd, 5574 wmi_service_ap_dfs, 5575 wmi_service_11ac, 5576 wmi_service_blockack, 5577 wmi_service_phyerr, 5578 wmi_service_bcn_filter, 5579 wmi_service_rtt, 5580 wmi_service_ratectrl, 5581 wmi_service_wow, 5582 wmi_service_ratectrl_cache, 5583 wmi_service_iram_tids, 5584 wmi_service_burst, 5585 wmi_service_smart_antenna_sw_support, 5586 wmi_service_gtk_offload, 5587 wmi_service_scan_sch, 5588 wmi_service_csa_offload, 5589 wmi_service_chatter, 5590 wmi_service_coex_freqavoid, 5591 wmi_service_packet_power_save, 5592 wmi_service_force_fw_hang, 5593 wmi_service_smart_antenna_hw_support, 5594 wmi_service_gpio, 5595 wmi_sta_uapsd_basic_auto_trig, 5596 wmi_sta_uapsd_var_auto_trig, 5597 wmi_service_sta_keep_alive, 5598 wmi_service_tx_encap, 5599 wmi_service_ap_ps_detect_out_of_sync, 5600 wmi_service_early_rx, 5601 wmi_service_enhanced_proxy_sta, 5602 wmi_service_tt, 5603 wmi_service_atf, 5604 wmi_service_peer_caching, 5605 wmi_service_coex_gpio, 5606 wmi_service_aux_spectral_intf, 5607 wmi_service_aux_chan_load_intf, 5608 wmi_service_bss_channel_info_64, 5609 wmi_service_ext_res_cfg_support, 5610 wmi_service_mesh, 5611 wmi_service_restrt_chnl_support, 5612 wmi_service_roam_scan_offload, 5613 wmi_service_arpns_offload, 5614 wmi_service_nlo, 5615 wmi_service_sta_dtim_ps_modulated_dtim, 5616 wmi_service_sta_smps, 5617 wmi_service_fwtest, 5618 wmi_service_sta_wmmac, 5619 wmi_service_tdls, 5620 wmi_service_mcc_bcn_interval_change, 5621 wmi_service_adaptive_ocs, 5622 wmi_service_ba_ssn_support, 5623 wmi_service_filter_ipsec_natkeepalive, 5624 wmi_service_wlan_hb, 5625 wmi_service_lte_ant_share_support, 5626 wmi_service_batch_scan, 5627 wmi_service_qpower, 5628 wmi_service_plmreq, 5629 wmi_service_thermal_mgmt, 5630 wmi_service_rmc, 5631 wmi_service_mhf_offload, 5632 wmi_service_coex_sar, 5633 wmi_service_bcn_txrate_override, 5634 wmi_service_nan, 5635 wmi_service_l1ss_stat, 5636 wmi_service_estimate_linkspeed, 5637 wmi_service_obss_scan, 5638 wmi_service_tdls_offchan, 5639 wmi_service_tdls_uapsd_buffer_sta, 5640 wmi_service_tdls_uapsd_sleep_sta, 5641 wmi_service_ibss_pwrsave, 5642 wmi_service_lpass, 5643 wmi_service_extscan, 5644 wmi_service_d0wow, 5645 wmi_service_hsoffload, 5646 wmi_service_roam_ho_offload, 5647 wmi_service_rx_full_reorder, 5648 wmi_service_dhcp_offload, 5649 wmi_service_sta_rx_ipa_offload_support, 5650 wmi_service_mdns_offload, 5651 wmi_service_sap_auth_offload, 5652 wmi_service_dual_band_simultaneous_support, 5653 wmi_service_ocb, 5654 wmi_service_ap_arpns_offload, 5655 wmi_service_per_band_chainmask_support, 5656 wmi_service_packet_filter_offload, 5657 wmi_service_mgmt_tx_htt, 5658 wmi_service_mgmt_tx_wmi, 5659 wmi_service_ext_msg, 5660 wmi_service_mawc, 5661 5662 wmi_service_peer_stats, 5663 wmi_service_mesh_11s, 5664 wmi_service_periodic_chan_stat_support, 5665 wmi_service_tx_mode_push_only, 5666 wmi_service_tx_mode_push_pull, 5667 wmi_service_tx_mode_dynamic, 5668 wmi_service_check_cal_version, 5669 wmi_service_btcoex_duty_cycle, 5670 wmi_service_4_wire_coex_support, 5671 wmi_service_multiple_vdev_restart, 5672 wmi_service_peer_assoc_conf, 5673 wmi_service_egap, 5674 wmi_service_sta_pmf_offload, 5675 wmi_service_unified_wow_capability, 5676 wmi_service_enterprise_mesh, 5677 wmi_service_apf_offload, 5678 wmi_service_sync_delete_cmds, 5679 wmi_service_ratectrl_limit_max_min_rates, 5680 wmi_service_nan_data, 5681 wmi_service_nan_rtt, 5682 wmi_service_11ax, 5683 wmi_service_deprecated_replace, 5684 wmi_service_tdls_conn_tracker_in_host_mode, 5685 wmi_service_enhanced_mcast_filter, 5686 wmi_service_half_rate_quarter_rate_support, 5687 wmi_service_vdev_rx_filter, 5688 wmi_service_p2p_listen_offload_support, 5689 wmi_service_mark_first_wakeup_packet, 5690 wmi_service_multiple_mcast_filter_set, 5691 wmi_service_host_managed_rx_reorder, 5692 wmi_service_flash_rdwr_support, 5693 wmi_service_wlan_stats_report, 5694 wmi_service_tx_msdu_id_new_partition_support, 5695 wmi_service_dfs_phyerr_offload, 5696 wmi_service_rcpi_support, 5697 wmi_service_fw_mem_dump_support, 5698 wmi_service_peer_stats_info, 5699 wmi_service_regulatory_db, 5700 wmi_service_11d_offload, 5701 wmi_service_hw_data_filtering, 5702 wmi_service_pkt_routing, 5703 wmi_service_offchan_tx_wmi, 5704 wmi_service_chan_load_info, 5705 wmi_service_extended_nss_support, 5706 wmi_service_ack_timeout, 5707 wmi_service_widebw_scan, 5708 wmi_service_bcn_offload_start_stop_support, 5709 wmi_service_offchan_data_tid_support, 5710 wmi_service_support_dma, 5711 wmi_service_8ss_tx_bfee, 5712 wmi_service_fils_support, 5713 wmi_service_mawc_support, 5714 wmi_service_wow_wakeup_by_timer_pattern, 5715 wmi_service_11k_neighbour_report_support, 5716 wmi_service_ap_obss_detection_offload, 5717 wmi_service_bss_color_offload, 5718 wmi_service_gmac_offload_support, 5719 wmi_service_host_dfs_check_support, 5720 wmi_service_dual_beacon_on_single_mac_scc_support, 5721 wmi_service_dual_beacon_on_single_mac_mcc_support, 5722 wmi_service_twt_requestor, 5723 wmi_service_twt_responder, 5724 wmi_service_listen_interval_offload_support, 5725 5726 #ifdef OL_ATH_SMART_LOGGING 5727 wmi_service_smart_logging_support, 5728 #endif 5729 wmi_service_infra_mbssid, 5730 wmi_service_esp_support, 5731 wmi_service_obss_spatial_reuse, 5732 wmi_service_per_vdev_chain_support, 5733 wmi_service_new_htt_msg_format, 5734 wmi_service_peer_unmap_cnf_support, 5735 wmi_service_beacon_reception_stats, 5736 wmi_service_vdev_latency_config, 5737 wmi_service_nan_dbs_support, 5738 wmi_service_ndi_dbs_support, 5739 wmi_service_nan_sap_support, 5740 wmi_service_ndi_sap_support, 5741 wmi_service_nan_disable_support, 5742 wmi_service_sta_plus_sta_support, 5743 wmi_service_hw_db2dbm_support, 5744 wmi_service_wlm_stats_support, 5745 wmi_service_ul_ru26_allowed, 5746 wmi_service_cfr_capture_support, 5747 wmi_service_bcast_twt_support, 5748 wmi_service_wpa3_ft_sae_support, 5749 wmi_service_wpa3_ft_suite_b_support, 5750 wmi_service_ft_fils, 5751 wmi_service_adaptive_11r_support, 5752 wmi_service_data_stall_recovery_support, 5753 wmi_service_tx_compl_tsf64, 5754 wmi_service_vdev_delete_all_peer, 5755 wmi_service_three_way_coex_config_legacy, 5756 wmi_service_rx_fse_support, 5757 wmi_service_dynamic_hw_mode, 5758 wmi_service_sae_roam_support, 5759 wmi_service_owe_roam_support, 5760 wmi_service_ext2_msg, 5761 wmi_service_6ghz_support, 5762 wmi_service_bw_165mhz_support, 5763 wmi_service_bw_restricted_80p80_support, 5764 wmi_service_packet_capture_support, 5765 wmi_service_nan_vdev, 5766 wmi_service_multiple_vdev_restart_ext, 5767 wmi_service_peer_delete_no_peer_flush_tids_cmd, 5768 wmi_service_time_sync_ftm, 5769 wmi_service_nss_ratio_to_host_support, 5770 wmi_roam_scan_chan_list_to_host_support, 5771 wmi_beacon_protection_support, 5772 wmi_service_sta_nan_ndi_four_port, 5773 wmi_service_host_scan_stop_vdev_all, 5774 wmi_service_ema_ap_support, 5775 wmi_support_extend_address, 5776 wmi_service_srg_srp_spatial_reuse_support, 5777 wmi_service_suiteb_roam_support, 5778 wmi_service_no_interband_mcc_support, 5779 wmi_service_dual_sta_roam_support, 5780 wmi_service_peer_create_conf, 5781 wmi_service_configure_roam_trigger_param_support, 5782 wmi_service_5dot9_ghz_support, 5783 wmi_service_cfr_ta_ra_as_fp_support, 5784 wmi_service_cfr_capture_count_support, 5785 wmi_service_ocv_support, 5786 wmi_service_ll_stats_per_chan_rx_tx_time, 5787 wmi_service_thermal_multi_client_support, 5788 wmi_service_mbss_param_in_vdev_start_support, 5789 wmi_service_fse_cmem_alloc_support, 5790 #ifdef FEATURE_CLUB_LL_STATS_AND_GET_STATION 5791 wmi_service_get_station_in_ll_stats_req, 5792 #endif 5793 wmi_service_scan_conf_per_ch_support, 5794 wmi_service_csa_beacon_template, 5795 wmi_service_twt_bcast_req_support, 5796 wmi_service_twt_bcast_resp_support, 5797 wmi_service_spectral_scan_disabled, 5798 #ifdef WLAN_SUPPORT_TWT 5799 wmi_service_twt_nudge, 5800 wmi_service_all_twt, 5801 wmi_service_twt_statistics, 5802 #endif 5803 wmi_service_wapi_concurrency_supported, 5804 wmi_service_sap_connected_d3_wow, 5805 wmi_service_go_connected_d3_wow, 5806 wmi_service_ext_tpc_reg_support, 5807 wmi_service_ndi_txbf_support, 5808 wmi_service_reg_cc_ext_event_support, 5809 wmi_service_bang_radar_320_support, 5810 #if defined(CONFIG_BAND_6GHZ) 5811 wmi_service_lower_6g_edge_ch_supp, 5812 wmi_service_disable_upper_6g_edge_ch_supp, 5813 #endif 5814 wmi_service_dcs_awgn_int_support, 5815 #ifdef WLAN_FEATURE_IGMP_OFFLOAD 5816 wmi_service_igmp_offload_support, 5817 #endif 5818 #ifdef WLAN_FEATURE_11BE 5819 wmi_service_11be, 5820 #endif 5821 #ifdef WLAN_FEATURE_11AX 5822 #ifdef FEATURE_WLAN_TDLS 5823 wmi_service_tdls_ax_support, 5824 #endif 5825 #endif 5826 #ifdef WLAN_FEATURE_BIG_DATA_STATS 5827 wmi_service_big_data_support, 5828 #endif 5829 wmi_service_sae_eapol_offload_support, 5830 wmi_service_ampdu_tx_buf_size_256_support, 5831 wmi_service_halphy_cal_enable_disable_support, 5832 wmi_service_halphy_cal_status, 5833 wmi_service_rtt_ap_initiator_staggered_mode_supported, 5834 wmi_service_rtt_ap_initiator_bursted_mode_supported, 5835 wmi_service_ema_multiple_group_supported, 5836 wmi_service_large_beacon_supported, 5837 wmi_service_aoa_for_rcc_supported, 5838 #ifdef WLAN_FEATURE_P2P_P2P_STA 5839 wmi_service_p2p_p2p_cc_support, 5840 #endif 5841 #ifdef THERMAL_STATS_SUPPORT 5842 wmi_service_thermal_stats_temp_range_supported, 5843 #endif 5844 wmi_service_hw_mode_policy_offload_support, 5845 wmi_service_mgmt_rx_reo_supported, 5846 wmi_service_phy_dma_byte_swap_support, 5847 wmi_service_spectral_session_info_support, 5848 wmi_service_umac_hang_recovery_support, 5849 wmi_service_mu_snif, 5850 #ifdef WLAN_FEATURE_DYNAMIC_MAC_ADDR_UPDATE 5851 wmi_service_dynamic_update_vdev_macaddr_support, 5852 #endif 5853 wmi_service_probe_all_bw_support, 5854 wmi_service_pno_scan_conf_per_ch_support, 5855 #ifdef QCA_UNDECODED_METADATA_SUPPORT 5856 wmi_service_fp_phy_err_filter_support, 5857 #endif 5858 #ifdef WLAN_FEATURE_11BE_MLO 5859 wmi_service_mlo_sta_nan_ndi_support, 5860 #endif 5861 wmi_service_pdev_rate_config_support, 5862 wmi_service_multi_peer_group_cmd_support, 5863 #ifdef WLAN_FEATURE_11BE 5864 wmi_service_radar_found_chan_freq_eq_center_freq, 5865 #endif 5866 wmi_service_pn_replay_check_support, 5867 #ifdef QCA_RSSI_DB2DBM 5868 wmi_service_pdev_rssi_dbm_conv_event_support, 5869 #endif 5870 #ifdef WIFI_POS_CONVERGED 5871 wmi_service_rtt_11az_mac_phy_sec_support, 5872 wmi_service_rtt_11az_mac_sec_support, 5873 wmi_service_rtt_11az_ntb_support, 5874 wmi_service_rtt_11az_tb_support, 5875 #endif 5876 wmi_service_pktlog_decode_info_support, 5877 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 5878 wmi_service_roam_stats_per_candidate_frame_info, 5879 #endif 5880 #ifdef MULTI_CLIENT_LL_SUPPORT 5881 wmi_service_configure_multi_client_ll_support, 5882 #endif 5883 #ifdef WLAN_VENDOR_HANDOFF_CONTROL 5884 wmi_service_configure_vendor_handoff_control_support, 5885 #endif 5886 #ifdef FEATURE_WLAN_TDLS 5887 #ifdef WLAN_FEATURE_11AX 5888 wmi_service_tdls_6g_support, 5889 #endif 5890 wmi_service_tdls_wideband_support, 5891 #endif 5892 wmi_service_is_my_mgmt_frame, 5893 wmi_service_linkspeed_roam_trigger_support, 5894 #ifdef FEATURE_SET 5895 wmi_service_feature_set_event_support, 5896 #endif 5897 #ifdef WLAN_PDEV_VDEV_SEND_MULTI_PARAM 5898 wmi_service_combined_set_param_support, 5899 #endif 5900 wmi_services_max, 5901 } wmi_conv_service_ids; 5902 #define WMI_SERVICE_UNAVAILABLE 0xFFFF 5903 5904 /** 5905 * enum WMI_DBG_PARAM - Debug params 5906 * @WMI_DBGLOG_LOG_LEVEL: Set the loglevel 5907 * @WMI_DBGLOG_VAP_ENABLE: Enable VAP level debug 5908 * @WMI_DBGLOG_VAP_DISABLE: Disable VAP level debug 5909 * @WMI_DBGLOG_MODULE_ENABLE: Enable MODULE level debug 5910 * @WMI_DBGLOG_MODULE_DISABLE: Disable MODULE level debug 5911 * @WMI_DBGLOG_MOD_LOG_LEVEL: Enable MODULE level debug 5912 * @WMI_DBGLOG_TYPE: set type of the debug output 5913 * @WMI_DBGLOG_REPORT_ENABLE: Enable Disable debug 5914 * @WMI_DBGLOG_MOD_WOW_LOG_LEVEL: set the WOW MODULE debug loglevel 5915 */ 5916 typedef enum { 5917 WMI_DBGLOG_LOG_LEVEL = 0x1, 5918 WMI_DBGLOG_VAP_ENABLE, 5919 WMI_DBGLOG_VAP_DISABLE, 5920 WMI_DBGLOG_MODULE_ENABLE, 5921 WMI_DBGLOG_MODULE_DISABLE, 5922 WMI_DBGLOG_MOD_LOG_LEVEL, 5923 WMI_DBGLOG_TYPE, 5924 WMI_DBGLOG_REPORT_ENABLE, 5925 WMI_DBGLOG_MOD_WOW_LOG_LEVEL 5926 } WMI_DBG_PARAM; 5927 5928 /** 5929 * struct wmi_host_fw_ver - FW version in non-tlv target 5930 * @sw_version: Versin info 5931 * @sw_version_1: Second dword of version 5932 */ 5933 struct wmi_host_fw_ver { 5934 uint32_t sw_version; 5935 uint32_t sw_version_1; 5936 }; 5937 5938 /** 5939 * struct wmi_host_fw_abi_ver - FW version in non-tlv target 5940 * @sw_version: Versin info 5941 * @abi_version: ABI version 5942 */ 5943 struct wmi_host_fw_abi_ver { 5944 uint32_t sw_version; 5945 uint32_t abi_version; 5946 }; 5947 5948 #ifdef FEATURE_SET 5949 /** 5950 * enum WMI_HOST_WIFI_STANDARD - Supported wifi standard 5951 * @WMI_HOST_WIFI_STANDARD_4: Wifi standard 4 5952 * @WMI_HOST_WIFI_STANDARD_5:Wifi standard 5 5953 * @WMI_HOST_WIFI_STANDARD_6: Wifi standard 6 5954 * @WMI_HOST_WIFI_STANDARD_6E: Wifi standard 6E 5955 * WMI_HOST_WIFI_STANDARD_7: Wifi standard 7 5956 */ 5957 typedef enum { 5958 WMI_HOST_WIFI_STANDARD_4 = 0, 5959 WMI_HOST_WIFI_STANDARD_5 = 1, 5960 WMI_HOST_WIFI_STANDARD_6 = 2, 5961 WMI_HOST_WIFI_STANDARD_6E = 3, 5962 WMI_HOST_WIFI_STANDARD_7 = 4, 5963 } WMI_HOST_WIFI_STANDARD; 5964 5965 /** 5966 * enum WMI_HOST_BAND_CONCURRENCY - Enum to represent supported concurrency 5967 * @WMI_HOST_BAND_CONCURRENCY_NONE: No concurrency is supported 5968 * @WMI_HOST_BAND_CONCURRENCY_DBS:DBS is supported 5969 * @WMI_HOST_BAND_CONCURRENCY_DBS_SBS: DBS and SBS are supported 5970 */ 5971 typedef enum { 5972 WMI_HOST_BAND_CONCURRENCY_NONE = 0, 5973 WMI_HOST_BAND_CONCURRENCY_DBS = 1, 5974 WMI_HOST_BAND_CONCURRENCY_DBS_SBS = 2, 5975 } WMI_HOST_BAND_CONCURRENCY; 5976 5977 /** 5978 * enum WMI_HOST_VENDOR1_REQ1_VERSION - Vendor 1 requirement 1 version 5979 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_00: Major version 3, mnor version 00 5980 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_01: Major version 3, mnor version 01 5981 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_20: Major version 3, mnor version 20 5982 */ 5983 typedef enum { 5984 WMI_HOST_VENDOR1_REQ1_VERSION_3_00 = 0, 5985 WMI_HOST_VENDOR1_REQ1_VERSION_3_01 = 1, 5986 WMI_HOST_VENDOR1_REQ1_VERSION_3_20 = 2, 5987 } WMI_HOST_VENDOR1_REQ1_VERSION; 5988 5989 /** 5990 * enum WMI_HOST_VENDOR1_REQ2_VERSION - Vendor 1 requirement 2 version 5991 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_00: Major version 3, mnor version 00 5992 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_01: Major version 3, mnor version 01 5993 * @WMI_HOST_VENDOR1_REQ2_VERSION_3_20: Major version 3, mnor version 20 5994 */ 5995 typedef enum { 5996 WMI_HOST_VENDOR1_REQ2_VERSION_3_00 = 0, 5997 WMI_HOST_VENDOR1_REQ2_VERSION_3_01 = 1, 5998 WMI_HOST_VENDOR1_REQ2_VERSION_3_20 = 2, 5999 } WMI_HOST_VENDOR1_REQ2_VERSION; 6000 6001 /** 6002 * enum WMI_HOST_NUM_ANTENNAS - Number of antennas 6003 * @WMI_HOST_SISO: When 1x1 is supported 6004 * @WMI_HOST_MIMO_2X2: When 2x2 MIMO is supported 6005 */ 6006 6007 typedef enum { 6008 WMI_HOST_SISO = 1, 6009 WMI_HOST_MIMO_2X2 = 2, 6010 } WMI_HOST_NUM_ANTENNAS; 6011 6012 /** 6013 * struct target_feature_set - Feature set structure 6014 * @wifi_standard: Wifi standard 6015 * @concurrency_support: Indicates supported concurrencies 6016 * @pno_in_unassoc_state: Indicates PNO support in un assoc state 6017 * @pno_in_assoc_state: Indicates PNO support in assoc state 6018 * @enable_twt: Enable TWT 6019 * enable_twt_requester Enable TWT requester 6020 * @enable_twt_broadcast: Enable TWT broadcast 6021 * @enable_twt_flexible: Enable flexible TWT 6022 * @enable_wifi_optimizer: indicates wifi optimizer is enabled or disabled 6023 * @enable_rfc835: indicates rfc835 is enabled or disabled 6024 * @sap_5g_supported: Indicates SAP 5g is supported or not 6025 * @sap_6g_supported: Indicates SAP 6g is supported or not 6026 * @band_capability: Band capability bit map 6027 * @sap_max_num_clients: Max clients supported by SAP 6028 * @set_country_code_hal_supported: Indicates country code hal supported or not 6029 * @get_valid_channel_supported: Indicates get vaid channel supported or not 6030 * @supported_dot11mode: Indicates supported dot11 mode 6031 * @sap_wpa3_support: Indicates wpa3 support for SAP 6032 * @vendor_req_1_version: Indicates vendor1 req1 version 6033 * @roaming_high_cu_roam_trigger: Roaming high CPU trigger enabled or disabled 6034 * @roaming_emergency_trigger: Roaming emergency trigger enabled or disabled 6035 * @roaming_btm_trihgger: Roaming btm trigger enabled or disabled 6036 * @roaming_idle_trigger: Roaming idle trigger enabled or disabled 6037 * @roaming_wtc_trigger: Roaming wtc trigger enabled or disabled 6038 * @roaming_btcoex_trigger: Roaming btcoex trigger enabled or disabled 6039 * @roaming_btw_wpa_wpa2: Roaming btw wpa wpa2 enabled or disabled 6040 * @roaming_manage_chan_list_api: Roaming manage chan list api enabled or 6041 * disabled 6042 * @roaming_adaptive_11r: Roaming adaptive 11r enabled or disabled 6043 * @roaming_ctrl_api_get_set: Roaming ctrl api get set enabled or disabled 6044 * @roaming_ctrl_api_reassoc: Roaming ctrl api reassoc enabled or disabled 6045 * @roaming_ctrl_get_cu: Roaming ctrl get cu enabled or disabled 6046 * @vendor_req_2_version: Vendor requirement version 2 6047 * @assurance_disconnect_reason_api: Assurance disconnect API supported or not 6048 * @frame_pcap_log_mgmt: Frame pcap logging mgmt supported or not 6049 * @rame_pcap_log_ctrl: Frame pcap logging ctrl supported or not 6050 * @frame_pcap_log_data: Frame pcap logging data supported or not 6051 * @security_wpa3_sae_h2e: Security wpa3 sae h2e supported or not 6052 * @security_wpa3_sae_ft: Security wpa3 sae ft supported or not 6053 * @security_wpa3_enterp_suitb: Security wpa3 enterprise suitb supported or not 6054 * @security_wpa3_enterp_suitb_192bit: Security wpa3 enterprise suitb 192bit 6055 * @supported or not 6056 * @security_fills_sha_256: Security fills sha 256 supported or not 6057 * @security_fills_sha_384: Security fills sha 384 supported or not 6058 * @security_fills_sha_256_FT: Security fills sha 256 FT supported or not 6059 * @security_fills_sha_384_FT: Security fills sha 384 FT supported or not 6060 * @security_enhanced_open: Security enhanced open supported or not 6061 * @enable_nan: enable NAN 6062 * @enable_tdls: Enable tdls 6063 * @enable_p2p_6e: Enable p2p 6e 6064 * @enable_tdls_offchannel: Enable tdls offchannel 6065 * @enable_tdls_capability_enhance: Enable tdls capability enhance 6066 * @max_tdls_peers: Max tdls peers 6067 * @sta_dual_p2p_support: Indicates sta+p2p+p2p support 6068 * @peer_bigdata_getbssinfo_support: Indicates bigdata getbssinfo support 6069 * @peer_bigdata_assocreject_info_support: Indicates bigdata assoc reject 6070 *@info support 6071 * @peer_getstainfo_support: Indicates getstainfo support 6072 * @feature_set_version: Indicates feature set version info 6073 * @num_antennas: Indicates number of antennas supported 6074 */ 6075 struct target_feature_set { 6076 WMI_HOST_WIFI_STANDARD wifi_standard; 6077 WMI_HOST_BAND_CONCURRENCY concurrency_support; 6078 bool pno_in_unassoc_state; 6079 bool pno_in_assoc_state; 6080 bool enable_twt; 6081 bool enable_twt_requester; 6082 bool enable_twt_broadcast; 6083 bool enable_twt_flexible; 6084 bool enable_wifi_optimizer; 6085 bool enable_rfc835; 6086 bool sap_5g_supported; 6087 bool sap_6g_supported; 6088 uint32_t band_capability; 6089 uint8_t sap_max_num_clients; 6090 bool set_country_code_hal_supported; 6091 bool get_valid_channel_supported; 6092 uint8_t supported_dot11mode; 6093 bool sap_wpa3_support; 6094 WMI_HOST_VENDOR1_REQ1_VERSION vendor_req_1_version; 6095 bool roaming_high_cu_roam_trigger; 6096 bool roaming_emergency_trigger; 6097 bool roaming_btm_trihgger; 6098 bool roaming_idle_trigger; 6099 bool roaming_wtc_trigger; 6100 bool roaming_btcoex_trigger; 6101 bool roaming_btw_wpa_wpa2; 6102 bool roaming_manage_chan_list_api; 6103 bool roaming_adaptive_11r; 6104 bool roaming_ctrl_api_get_set; 6105 bool roaming_ctrl_api_reassoc; 6106 bool roaming_ctrl_get_cu; 6107 WMI_HOST_VENDOR1_REQ2_VERSION vendor_req_2_version; 6108 bool assurance_disconnect_reason_api; 6109 bool frame_pcap_log_mgmt; 6110 bool frame_pcap_log_ctrl; 6111 bool frame_pcap_log_data; 6112 bool security_wpa3_sae_h2e; 6113 bool security_wpa3_sae_ft; 6114 bool security_wpa3_enterp_suitb; 6115 bool security_wpa3_enterp_suitb_192bit; 6116 bool security_fills_sha_256; 6117 bool security_fills_sha_384; 6118 bool security_fills_sha_256_FT; 6119 bool security_fills_sha_384_FT; 6120 bool security_enhanced_open; 6121 bool enable_nan; 6122 bool enable_tdls; 6123 bool enable_p2p_6e; 6124 bool enable_tdls_offchannel; 6125 bool enable_tdls_capability_enhance; 6126 uint8_t max_tdls_peers; 6127 bool sta_dual_p2p_support; 6128 bool peer_bigdata_getbssinfo_support; 6129 bool peer_bigdata_assocreject_info_support; 6130 bool peer_getstainfo_support; 6131 uint16_t feature_set_version; 6132 WMI_HOST_NUM_ANTENNAS num_antennas; 6133 }; 6134 #endif 6135 6136 /** 6137 * struct target_resource_config - Resource config sent from host to target 6138 * abstracted out to include union of both configs 6139 * @num_vdevs: Number vdevs configured 6140 * @num_peers: Number of peers 6141 * @num_active_peers: Number of active peers for peer cache 6142 * @num_offload_peers: Number of offload peers 6143 * @num_offload_reorder_buffs: number of offload reorder buffs 6144 * @num_peer_keys: number of peer keys 6145 * @num_tids: number of tids 6146 * @ast_skid_limit: AST skid limit 6147 * @tx_chain_mask: TX chain mask 6148 * @rx_chain_mask: RX chain mask 6149 * @rx_timeout_pri: RX reorder timeout per AC 6150 * @rx_decap_mode: RX decap mode 6151 * @scan_max_pending_req: Scan mac pending req 6152 * @bmiss_offload_max_vdev: Beacom miss offload max vdevs 6153 * @roam_offload_max_vdev: Roam offload max vdevs 6154 * @roam_offload_max_ap_profiles: roam offload max ap profiles 6155 * @num_mcast_groups: num mcast groups 6156 * @num_mcast_table_elems: number of macst table elems 6157 * @mcast2ucast_mode: mcast enhance mode 6158 * @tx_dbg_log_size: DBG log buf size 6159 * @num_wds_entries: number of WDS entries 6160 * @dma_burst_size: DMA burst size. 6161 * @mac_aggr_delim: Mac aggr delim 6162 * @rx_skip_defrag_timeout_dup_detection_check: Defrag dup check in host? 6163 * @vow_config: vow configuration 6164 * @gtk_offload_max_vdev: Max vdevs for GTK offload 6165 * @num_msdu_desc: Number of msdu desc 6166 * @max_frag_entries: Max frag entries 6167 * @agile_capability: Target Agile Capability 6168 * End common 6169 * @enable_pci_gen: To enable pci gen switch 6170 * @max_peer_ext_stats: Max peer EXT stats 6171 * @smart_ant_cap: Smart antenna capabilities 6172 * @BK_Minfree: BIN configuration for BK traffic 6173 * @BE_Minfree: BIN configuration for BE traffic 6174 * @VI_Minfree: BIN configuration for VI traffic 6175 * @VO_Minfree: BIN configuration for VO traffic 6176 * @rx_batchmode: RX batch mode 6177 * @tt_support: Thermal throttling support 6178 * @atf_config: ATF config 6179 * @mgmt_comp_evt_bundle_support: bundle support required for mgmt complete evt 6180 * @tx_msdu_new_partition_id_support: new partiition id support for tx msdu 6181 * @peer_unmap_conf_support: peer unmap conf support in fw 6182 * @iphdr_pad_config: ipheader pad config 6183 * @qwrap_config: Qwrap configuration 6184 * @alloc_frag_desc_for_data_pkt: Frag desc for data 6185 * Added in MCL 6186 * @num_tdls_vdevs: 6187 * @num_tdls_conn_table_entries: 6188 * @beacon_tx_offload_max_vdev: 6189 * @num_multicast_filter_entries: 6190 * @num_wow_filters: 6191 * @num_keep_alive_pattern: 6192 * @keep_alive_pattern_size: 6193 * @max_tdls_concurrent_sleep_sta: 6194 * @max_tdls_concurrent_buffer_sta: 6195 * @wmi_send_separate: 6196 * @num_ocb_vdevs: 6197 * @num_ocb_channels: 6198 * @num_ocb_schedules: 6199 * @num_packet_filters: maximum number of packet filter rules to support 6200 * @num_max_sta_vdevs: maximum number of concurrent station vdevs to support 6201 * @num_ns_ext_tuples_cfg: 6202 * @apf_instruction_size: 6203 * @max_bssid_rx_filters: 6204 * @use_pdev_id: 6205 * @max_num_dbs_scan_duty_cycle: max dbs can duty cycle value 6206 * @cce_disable: disable cce component 6207 * @peer_map_unmap_v2/peer_map_unmap_version: configure peer map/unmap version 6208 * @twt_ap_pdev_count: Number of MAC on which AP TWT feature is supported 6209 * @twt_ap_sta_count: Max no of STA with which TWT sessions can be formed 6210 * by the AP 6211 * @max_bssid_indicator: max number of MBSS VAPs 6212 * @three_way_coex_config_legacy_en: enable three way coex legacy feature 6213 * @max_num_group_keys: max number of group keys supported for VLAN 6214 * @re_ul_resp: enable 11ax UL response feature (UL-OFDMA) for repeater 6215 * @ipa_disable: disable IPA feature 6216 * @ast_1_valid_mask_enable: mask to enable ast index 1 6217 * @ast_2_valid_mask_enable: mask to enable ast index 2 6218 * @ast_3_valid_mask_enable: mask to enable ast index 3 6219 * @ast_0_flow_mask_enable: mask to enable flow support for ast index 0 6220 * @ast_1_flow_mask_enable: mask to enable flow support for ast index 1 6221 * @ast_2_flow_mask_enable: mask to enable flow support for ast index 2 6222 * @ast_3_flow_mask_enable: mask to enable flow support for ast index 3 6223 * @ast_tid_high_mask_enable: enable tid valid mask for high priority flow 6224 * @ast_tid_low_mask_enable: enable tid valid mask for low priority flow 6225 * @nan_separate_iface_support: Separate iface creation for NAN 6226 * @time_sync_ftm: enable ftm based time sync 6227 * @is_reg_cc_ext_event_supported: Flag to indicate if reg_cc_ext is supported 6228 * @is_host_dfs_320mhz_bangradar_supported Flag to indicate if dfs 320 supported 6229 * @max_rnr_neighbours: Max supported RNR neighbors in multisoc APs 6230 * @ema_max_vap_cnt: Number of maximum EMA tx-vaps at any instance of time 6231 * @ema_max_profile_period: Maximum EMA profile periodicity on any pdev 6232 * @max_ndp_sessions: Max ndp sessions support 6233 * @max_ndi: max number of ndi host supports 6234 * @carrier_vow_optmization: configure vow-optimization for carrier-usecase 6235 * @is_sap_connected_d3wow_enabled: is sap d3wow with connected client supported 6236 * @is_go_connected_d3wow_enabled: is go d3wow with connected client supported 6237 * @dynamic_pcie_gen_speed_change: is dynamic pcie gen speed change enabled 6238 * @is_6ghz_sp_pwrmode_supp_enabled: Indicates whether AP is capable of 6239 * operating in SP Power mode in 6GHz. 6240 * 0 - AP can operate in non-SP power mode. 6241 * Eg: LPI mode 6242 * 1 - AP can operate in all power modes, 6243 * inclusive of SP power mode. 6244 * @afc_timer_check_disable: Disables AFC Timer related checks in FW 6245 * @afc_req_id_check_disable: Disables AFC Request ID check in FW 6246 * @afc_indoor_support: AFC support indoor deployment 6247 * @afc_outdoor_support: AFC support outdoor deployment 6248 * @carrier_profile_config: Configuration for per-carrier profile 6249 * @reo_qdesc_shared_addr_table_enabled: Reo shared qref enhancement enabled 6250 * @num_max_active_vdevs: max number of active virtual devices (VAPs) to 6251 * support 6252 * @notify_frame_support: capability to mark notify frames from host 6253 */ 6254 typedef struct { 6255 uint32_t num_vdevs; 6256 uint32_t num_peers; 6257 uint32_t num_active_peers; 6258 uint32_t num_offload_peers; 6259 uint32_t num_offload_reorder_buffs; 6260 uint32_t num_peer_keys; 6261 uint32_t num_tids; 6262 uint32_t ast_skid_limit; 6263 uint32_t tx_chain_mask; 6264 uint32_t rx_chain_mask; 6265 uint32_t rx_timeout_pri[4]; 6266 uint32_t rx_decap_mode; 6267 uint32_t scan_max_pending_req; 6268 uint32_t bmiss_offload_max_vdev; 6269 uint32_t roam_offload_max_vdev; 6270 uint32_t roam_offload_max_ap_profiles; 6271 uint32_t num_mcast_groups; 6272 uint32_t num_mcast_table_elems; 6273 uint32_t mcast2ucast_mode; 6274 uint32_t tx_dbg_log_size; 6275 uint32_t num_wds_entries; 6276 uint32_t dma_burst_size; 6277 uint32_t mac_aggr_delim; 6278 uint32_t rx_skip_defrag_timeout_dup_detection_check; 6279 uint32_t vow_config; 6280 uint32_t gtk_offload_max_vdev; 6281 uint32_t num_msdu_desc; /* Number of msdu desc */ 6282 uint32_t max_frag_entries; 6283 uint32_t scheduler_params; 6284 uint32_t agile_capability; 6285 uint32_t enable_pci_gen; 6286 /* End common */ 6287 6288 /* Added for Beeliner */ 6289 uint32_t max_peer_ext_stats; 6290 uint32_t smart_ant_cap; 6291 uint32_t BK_Minfree; 6292 uint32_t BE_Minfree; 6293 uint32_t VI_Minfree; 6294 uint32_t VO_Minfree; 6295 uint32_t rx_batchmode; 6296 uint32_t tt_support; 6297 uint32_t atf_config:1, 6298 mgmt_comp_evt_bundle_support:1, 6299 tx_msdu_new_partition_id_support:1, 6300 new_htt_msg_format:1, 6301 peer_unmap_conf_support:1, 6302 pktcapture_support:1; 6303 uint32_t iphdr_pad_config; 6304 uint32_t 6305 qwrap_config:16, 6306 alloc_frag_desc_for_data_pkt:16; 6307 6308 /* Added in MCL */ 6309 uint32_t num_tdls_vdevs; 6310 uint32_t num_tdls_conn_table_entries; 6311 uint32_t beacon_tx_offload_max_vdev; 6312 uint32_t num_multicast_filter_entries; 6313 uint32_t num_wow_filters; 6314 uint32_t num_keep_alive_pattern; 6315 uint32_t keep_alive_pattern_size; 6316 uint32_t max_tdls_concurrent_sleep_sta; 6317 uint32_t max_tdls_concurrent_buffer_sta; 6318 uint32_t wmi_send_separate; 6319 uint32_t num_ocb_vdevs; 6320 uint32_t num_ocb_channels; 6321 uint32_t num_ocb_schedules; 6322 uint32_t num_packet_filters; 6323 uint32_t num_max_sta_vdevs; 6324 uint32_t num_ns_ext_tuples_cfg; 6325 uint32_t apf_instruction_size; 6326 uint32_t max_bssid_rx_filters; 6327 uint32_t use_pdev_id; 6328 uint32_t max_num_dbs_scan_duty_cycle; 6329 bool cce_disable; 6330 union { 6331 bool peer_map_unmap_v2; 6332 uint8_t peer_map_unmap_version; 6333 }; 6334 uint32_t twt_ap_pdev_count; 6335 uint32_t twt_ap_sta_count; 6336 uint32_t max_bssid_indicator; 6337 uint32_t eapol_minrate_set:1, 6338 eapol_minrate_ac_set:2; 6339 bool tstamp64_en; 6340 bool three_way_coex_config_legacy_en; 6341 uint32_t max_num_group_keys; 6342 uint32_t re_ul_resp; 6343 bool ipa_disable; 6344 uint32_t ast_1_valid_mask_enable:1, 6345 ast_2_valid_mask_enable:1, 6346 ast_3_valid_mask_enable:1; 6347 uint32_t ast_0_flow_mask_enable:4, 6348 ast_1_flow_mask_enable:4, 6349 ast_2_flow_mask_enable:4, 6350 ast_3_flow_mask_enable:4, 6351 ast_tid_high_mask_enable:8, 6352 ast_tid_low_mask_enable:8; 6353 bool nan_separate_iface_support; 6354 bool time_sync_ftm; 6355 bool is_reg_cc_ext_event_supported; 6356 bool is_host_dfs_320mhz_bangradar_supported; 6357 uint32_t max_rnr_neighbours; 6358 uint32_t ema_max_vap_cnt; 6359 uint32_t ema_max_profile_period; 6360 uint32_t max_ndp_sessions; 6361 uint32_t max_ndi; 6362 bool carrier_vow_optimization; 6363 uint32_t is_sap_connected_d3wow_enabled; 6364 uint32_t is_go_connected_d3wow_enabled; 6365 bool sae_eapol_offload; 6366 bool dynamic_pcie_gen_speed_change; 6367 bool twt_ack_support_cap; 6368 uint32_t ema_init_config; 6369 uint32_t target_cap_flags; 6370 bool is_6ghz_sp_pwrmode_supp_enabled; 6371 bool afc_timer_check_disable; 6372 bool afc_req_id_check_disable; 6373 bool afc_indoor_support; 6374 bool afc_outdoor_support; 6375 uint32_t carrier_profile_config; 6376 bool sawf; 6377 bool reo_qdesc_shared_addr_table_enabled; 6378 uint32_t num_max_active_vdevs; 6379 uint8_t notify_frame_support; 6380 } target_resource_config; 6381 6382 /** 6383 * Enum replicated for host abstraction with FW 6384 */ 6385 typedef enum { 6386 /* Event respose of START CMD */ 6387 WMI_HOST_VDEV_START_RESP_EVENT = 0, 6388 /* Event respose of RESTART CMD */ 6389 WMI_HOST_VDEV_RESTART_RESP_EVENT, 6390 } WMI_HOST_START_EVENT_PARAM; 6391 6392 /** 6393 * struct wmi_host_roam_event - host roam event param 6394 * @vdev_id: vdev id 6395 * @reason: roam reason 6396 * @rssi: RSSI 6397 */ 6398 typedef struct { 6399 uint32_t vdev_id; 6400 uint32_t reason; 6401 uint32_t rssi; 6402 } wmi_host_roam_event; 6403 6404 /** 6405 * ENUM wmi_host_scan_event_type - Scan event type 6406 */ 6407 enum wmi_host_scan_event_type { 6408 WMI_HOST_SCAN_EVENT_STARTED = 0x1, 6409 WMI_HOST_SCAN_EVENT_COMPLETED = 0x2, 6410 WMI_HOST_SCAN_EVENT_BSS_CHANNEL = 0x4, 6411 WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, 6412 WMI_HOST_SCAN_EVENT_DEQUEUED = 0x10, 6413 WMI_HOST_SCAN_EVENT_PREEMPTED = 0x20, 6414 WMI_HOST_SCAN_EVENT_START_FAILED = 0x40, 6415 WMI_HOST_SCAN_EVENT_RESTARTED = 0x80, 6416 WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100, 6417 WMI_HOST_SCAN_EVENT_INVALID = 0x200, 6418 WMI_HOST_SCAN_EVENT_GPIO_TIMEOUT = 0x400, 6419 WMI_HOST_SCAN_EVENT_MAX = 0x8000 6420 }; 6421 6422 /** 6423 * ENUM wmi_host_scan_completion_reason - Scan completion event type 6424 */ 6425 enum wmi_host_scan_completion_reason { 6426 /** scan related events */ 6427 WMI_HOST_SCAN_REASON_NONE = 0xFF, 6428 WMI_HOST_SCAN_REASON_COMPLETED = 0, 6429 WMI_HOST_SCAN_REASON_CANCELLED = 1, 6430 WMI_HOST_SCAN_REASON_PREEMPTED = 2, 6431 WMI_HOST_SCAN_REASON_TIMEDOUT = 3, 6432 WMI_HOST_SCAN_REASON_INTERNAL_FAILURE = 4, 6433 WMI_HOST_SCAN_REASON_MAX, 6434 }; 6435 6436 /** 6437 * struct wmi_host_scan_event - Scan event response from target 6438 * @event: event type 6439 * @reason: Reason for event 6440 * @channel_freq: channel frequency 6441 * @requestor: requestor id 6442 * @scan_id: scan id 6443 * @vdev_id: vdev id 6444 */ 6445 typedef struct { 6446 uint32_t event; 6447 uint32_t reason; 6448 uint32_t channel_freq; 6449 uint32_t requestor; 6450 uint32_t scan_id; 6451 uint32_t vdev_id; 6452 } wmi_host_scan_event; 6453 6454 /** 6455 * struct wmi_host_pdev_reserve_ast_entry_event - Reserve AST entry 6456 * @result: result 6457 */ 6458 typedef struct { 6459 uint32_t result; 6460 } wmi_host_pdev_reserve_ast_entry_event; 6461 6462 /** 6463 * struct wmi_host_mcast_ageout_entry - mcast aged-out entry 6464 * @grp_addr: IPv4/6 mcast group addr 6465 * @vdev_id: vdev id 6466 */ 6467 typedef struct { 6468 uint8_t grp_addr[16]; 6469 uint32_t vdev_id; 6470 } wmi_host_mcast_ageout_entry; 6471 6472 /** 6473 * struct wmi_host_mcast_list_ageout_event - List of mcast entry aged-out 6474 * @num_entry: Number of mcast entries timed-out 6475 * @entry: List of wmi_host_mcast_ageout_entry 6476 */ 6477 typedef struct { 6478 uint32_t num_entry; 6479 wmi_host_mcast_ageout_entry entry[1]; 6480 } wmi_host_mcast_list_ageout_event; 6481 6482 /** 6483 * enum wmi_host_pdev_tpc_event_offset: offsets of TPC events 6484 * @WMI_HOST_TX_POWER_MAX: offset of max tx power 6485 * @WMI_HOST_TX_POWER_MIN: offset of min tx power 6486 * @WMI_HOST_TX_POWER_LEN: size of tpc values 6487 */ 6488 enum wmi_host_pdev_tpc_event_offset { 6489 WMI_HOST_TX_POWER_MAX, 6490 WMI_HOST_TX_POWER_MIN, 6491 WMI_HOST_TX_POWER_LEN, 6492 }; 6493 6494 /** 6495 * struct wmi_host_pdev_generic_buffer_event 6496 * @buf_type: Buffer type 6497 * @frag_id: Frag id 6498 * @more_frag: more frags pending 6499 * @buf_len: buffer length 6500 * @buf_info: variable length buffer 6501 */ 6502 typedef struct { 6503 uint32_t buf_type; 6504 uint32_t frag_id; 6505 uint32_t more_frag; 6506 uint32_t buf_len; 6507 uint32_t buf_info[1]; 6508 } wmi_host_pdev_generic_buffer_event; 6509 /** 6510 * Enum for host buffer event 6511 */ 6512 enum { 6513 WMI_HOST_BUFFER_TYPE_RATEPWR_TABLE, 6514 WMI_HOST_BUFFER_TYPE_CTL_TABLE, 6515 }; 6516 6517 /** 6518 * Enums for TPC event 6519 */ 6520 typedef enum { 6521 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 6522 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 6523 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 6524 } WMI_HOST_TPC_CONFIG_EVENT_FLAG; 6525 6526 /** 6527 * Medium Utilization evaluation algorithms 6528 * These algorithms can be complementary rather than exclusive. 6529 */ 6530 typedef enum { 6531 WMI_HOST_MU_BASIC_ALGO = 0x1, 6532 WMI_HOST_MU_PER_BSSID_ALGO = 0x2, 6533 WMI_HOST_MU_HIDDEN_NODE_ALGO = 0x4, 6534 } WMI_HOST_MU_ALGO_TYPE; 6535 /* max MU alg combinations supported by target */ 6536 #define WMI_HOST_MU_MAX_ALGO_TYPE 3 6537 6538 /** 6539 * struct wmi_host_mu_db_entry 6540 * @event_type: 0=AP, 1=STA, 2=Small Cell(SC) 6541 * @bssid_mac_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC 6542 * @tx_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC 6543 * @avg_duration_us: Avg. duration for which node was transmitting 6544 * @avg_rssi: Avg. RSSI of all TX packets by node. Unit dBm 6545 * @mu_percent: % medium utilization by node 6546 */ 6547 typedef struct { 6548 uint32_t entry_type; 6549 wmi_host_mac_addr bssid_mac_addr; 6550 wmi_host_mac_addr tx_addr; 6551 uint32_t avg_duration_us; 6552 uint32_t avg_rssi; 6553 uint32_t mu_percent; 6554 } wmi_host_mu_db_entry; 6555 6556 /** 6557 * struct wmi_host_mu_report_event - WMI_MU_REPORT_EVENTID 6558 * @mu_request_id: request id 6559 * @status_reason: MU_STATUS_REASON 6560 * @total_mu: MU_ALG_TYPE combinations 6561 * @num_active_bssid: number of active bssid 6562 * @hidden_node_mu : hidden node algo MU per bin 6563 * @num_TA_entries : No. of entries found in MU db report 6564 */ 6565 typedef struct { 6566 uint32_t mu_request_id; 6567 uint32_t status_reason; 6568 uint32_t total_mu[WMI_HOST_MU_MAX_ALGO_TYPE]; 6569 uint32_t num_active_bssid; 6570 uint32_t hidden_node_mu[LTEU_MAX_BINS]; 6571 uint32_t num_TA_entries; 6572 } wmi_host_mu_report_event; 6573 6574 #define WMI_HOST_TIM_BITMAP_ARRAY_SIZE 17 6575 6576 /** 6577 * struct wmi_host_p2p_noa_descriptor - NoA desc in SWBA event 6578 * @type_count: Absence count 6579 * @duration: NoA duration 6580 * @interval: NoA interval 6581 * @start_time: start time 6582 */ 6583 typedef struct { 6584 uint32_t type_count; 6585 uint32_t duration; 6586 uint32_t interval; 6587 uint32_t start_time; 6588 } wmi_host_p2p_noa_descriptor; 6589 6590 /* Maximum CCK, OFDM rates supported */ 6591 #define WMI_SA_MAX_CCK_OFDM_RATES 12 6592 /* Maximum MCS rates supported; 4 rates in each dword */ 6593 /* Maximum MCS ratecodes with 11ax */ 6594 #define WMI_SA_MAX_MCS_RATES 96 6595 #define WMI_SA_MAX_RATE_COUNTERS 4 6596 /* Maximum rate series used for transmission */ 6597 #define SA_MAX_RATE_SERIES 2 6598 6599 #define SA_MAX_LEGACY_RATE_DWORDS 3 6600 #define SA_MAX_HT_RATE_DWORDS 10 6601 #define SA_BYTES_IN_DWORD 4 6602 #define SA_MASK_BYTE 0xff 6603 #define SA_MASK_BYTE3 0xff0000 6604 6605 /* Support 11ax 11bit ratecode */ 6606 #define SA_MASK_RCODE 0x7ff 6607 #define SA_WORD_BITS_LEN 16 6608 #define SA_WORDS_IN_DWORD 2 6609 #define SA_MAX_LEGACY_RATE_WORDS 6 6610 #define SA_MAX_HT_RATE_WORDS 48 6611 6612 /* TODO: ratecode_160 needs to add for future chips */ 6613 /** 6614 * struct wmi_sa_rate_cap - smart antenna rat capabilities 6615 * @pdev_id: pdev_id 6616 * @ratecode_legacy: Rate code array for CCK OFDM 6617 * @ratecode_20: Rate code array for 20MHz BW 6618 * @ratecode_40: Rate code array for 40MHz BW 6619 * @ratecode_80: Rate code array for 80MHz BW 6620 * @ratecount: Max Rate count for each mode 6621 */ 6622 typedef struct { 6623 uint16_t ratecode_legacy[WMI_SA_MAX_CCK_OFDM_RATES]; 6624 uint16_t ratecode_20[WMI_SA_MAX_MCS_RATES]; 6625 uint16_t ratecode_40[WMI_SA_MAX_MCS_RATES]; 6626 uint16_t ratecode_80[WMI_SA_MAX_MCS_RATES]; 6627 uint8_t ratecount[WMI_SA_MAX_RATE_COUNTERS]; 6628 } wmi_sa_rate_cap; 6629 6630 /** Preamble types to be used with VDEV fixed rate configuration */ 6631 typedef enum { 6632 WMI_HOST_RATE_PREAMBLE_OFDM, 6633 WMI_HOST_RATE_PREAMBLE_CCK, 6634 WMI_HOST_RATE_PREAMBLE_HT, 6635 WMI_HOST_RATE_PREAMBLE_VHT, 6636 WMI_HOST_RATE_PREAMBLE_HE, 6637 #ifdef WLAN_FEATURE_11BE 6638 WMI_HOST_RATE_PREAMBLE_EHT, 6639 #endif 6640 } WMI_HOST_RATE_PREAMBLE; 6641 6642 #define WMI_HOST_FIXED_RATE_NONE (0xff) 6643 6644 /** preablbe long */ 6645 #define WMI_HOST_VDEV_PREAMBLE_LONG 0x1 6646 /** preablbe short */ 6647 #define WMI_HOST_VDEV_PREAMBLE_SHORT 0x2 6648 /** found a better AP */ 6649 #define WMI_HOST_ROAM_REASON_BETTER_AP 0x1 6650 /** beacon miss detected */ 6651 #define WMI_HOST_ROAM_REASON_BMISS 0x2 6652 /** deauth/disassoc received */ 6653 #define WMI_HOST_ROAM_REASON_DEAUTH 0x2 6654 /** connected AP's low rssi condition detected */ 6655 #define WMI_HOST_ROAM_REASON_LOW_RSSI 0x3 6656 /** found another AP that matches SSID and Security profile in 6657 * WMI_ROAM_AP_PROFILE, found during scan triggered upon FINAL_BMISS 6658 */ 6659 #define WMI_HOST_ROAM_REASON_SUITABLE_AP 0x4 6660 /** LFR3.0 roaming failed, indicate the disconnection to host */ 6661 #define WMI_HOST_ROAM_REASON_HO_FAILED 0x5 6662 6663 /** values for vdev_type */ 6664 #define WMI_HOST_VDEV_TYPE_AP 0x1 6665 #define WMI_HOST_VDEV_TYPE_STA 0x2 6666 #define WMI_HOST_VDEV_TYPE_IBSS 0x3 6667 #define WMI_HOST_VDEV_TYPE_MONITOR 0x4 6668 6669 /** values for vdev_subtype */ 6670 #define WMI_HOST_VDEV_SUBTYPE_P2P_DEVICE 0x1 6671 #define WMI_HOST_VDEV_SUBTYPE_P2P_CLIENT 0x2 6672 #define WMI_HOST_VDEV_SUBTYPE_P2P_GO 0x3 6673 #define WMI_HOST_VDEV_SUBTYPE_PROXY_STA 0x4 6674 #define WMI_HOST_VDEV_SUBTYPE_MESH 0x5 6675 6676 #define WMI_HOST_MGMT_TID 17 6677 /* Disable aging & learning */ 6678 #define WMI_HOST_WDS_FLAG_STATIC 0x1 6679 6680 #ifdef ENABLE_HOST_TO_TARGET_CONVERSION 6681 #define PEER_PARAM(name) WMI_HOST_ ## name 6682 #else 6683 #define PEER_PARAM(name) WMI_HOST_ ## name = WMI_ ## name 6684 #endif /* ENABLE_HOST_TO_TARGET_CONVERSION */ 6685 6686 /** 6687 * Peer param enum abstracted from target 6688 * @WMI_HOST_PEER_MIMO_PS_STATE: mimo powersave state 6689 * @WMI_HOST_PEER_AMPDU: enable/disable AMPDU . initial value (enabled) 6690 * @WMI_HOST_PEER_AUTHORIZE: authorize/unauthorize peer. 6691 * initial value is unauthorized (0) 6692 * @WMI_HOST_PEER_CHWIDTH: Peer channel bandwidth 6693 * @WMI_HOST_PEER_NSS: peer NSS 6694 * @WMI_HOST_PEER_USE_4ADDR: USE 4 ADDR 6695 * @WMI_HOST_PEER_EXT_STATS_ENABLE: Enable extended peer stats 6696 * NON-TLV special 6697 * @WMI_HOST_PEER_USE_FIXED_PWR: Use FIXED Pwr, 6698 * @WMI_HOST_PEER_PARAM_FIXED_RATE: Set peer fixed rate 6699 * @WMI_HOST_PEER_SET_MU_ALLOWLIST: Allowlist peer TIDs 6700 * @WMI_HOST_PEER_MEMBERSHIP: set group membership status 6701 * @WMI_HOST_PEER_USERPOS: User POS 6702 * @WMI_HOST_PEER_CRIT_PROTO_HINT_ENABLED: Critical Protocol Hint enabled 6703 * @WMI_HOST_PEER_TX_FAIL_CNT_THR: Tx Fail count threshold 6704 * @WMI_HOST_PEER_SET_HW_RETRY_CTS2S: Set hardware retry CTS to self 6705 * @WMI_HOST_PEER_IBSS_ATIM_WINDOW_LENGTH: IBSS ATIM window length 6706 * @WMI_HOST_PEER_PHYMODE: Peer Phymode 6707 * @WMI_HOST_PEER_SET_MAX_TX_RATE: Set MAX Tx rate 6708 * @WMI_HOST_PEER_SET_DEFAULT_ROUTING: Set default Rx routing 6709 * @WMI_HOST_PEER_SET_MIN_TX_RATE: Set Minimum T rate 6710 * @WMI_HOST_PEER_NSS_VHT160: peer NSS for 160Mhz 6711 * @WMI_HOST_PEER_NSS_VHT80_80: peer NSS for 80+80MHz 6712 * @WMI_HOST_PEER_PARAM_SU_TXBF_SOUNDING_INTERVAL: Set SU sounding interval 6713 * @WMI_HOST_PEER_PARAM_MU_TXBF_SOUNDING_INTERVAL: Set MU sounding interval 6714 * @WMI_HOST_PEER_PARAM_TXBF_SOUNDING_ENABLE: Enable sounding interval set 6715 * @WMI_HOST_PEER_PARAM_MU_ENABLE: Enable MU support 6716 * @WMI_HOST_PEER_PARAM_OFDMA_ENABLE: Enable OFDMA support 6717 * @WMI_HOST_PEER_PARAM_ENABLE_FT: Notify FT roam 6718 * @WMI_HOST_PEER_CHWIDTH_PUNCTURE_20MHZ_BITMAP: Peer channel bandwidth and 6719 * puncture bitmap 6720 */ 6721 enum { 6722 PEER_PARAM(PEER_MIMO_PS_STATE), 6723 PEER_PARAM(PEER_AMPDU), 6724 PEER_PARAM(PEER_AUTHORIZE), 6725 PEER_PARAM(PEER_CHWIDTH), 6726 PEER_PARAM(PEER_NSS), 6727 PEER_PARAM(PEER_USE_4ADDR), 6728 #if defined(WMI_NON_TLV_SUPPORT) || defined(WMI_TLV_AND_NON_TLV_SUPPORT) 6729 PEER_PARAM(PEER_EXT_STATS_ENABLE), 6730 #endif 6731 PEER_PARAM(PEER_USE_FIXED_PWR), 6732 PEER_PARAM(PEER_PARAM_FIXED_RATE), 6733 PEER_PARAM(PEER_SET_MU_ALLOWLIST), 6734 PEER_PARAM(PEER_MEMBERSHIP), 6735 PEER_PARAM(PEER_USERPOS), 6736 PEER_PARAM(PEER_CRIT_PROTO_HINT_ENABLED), 6737 PEER_PARAM(PEER_TX_FAIL_CNT_THR), 6738 PEER_PARAM(PEER_SET_HW_RETRY_CTS2S), 6739 PEER_PARAM(PEER_IBSS_ATIM_WINDOW_LENGTH), 6740 PEER_PARAM(PEER_PHYMODE), 6741 PEER_PARAM(PEER_SET_MAX_TX_RATE), 6742 PEER_PARAM(PEER_SET_DEFAULT_ROUTING), 6743 PEER_PARAM(PEER_SET_MIN_TX_RATE), 6744 PEER_PARAM(PEER_NSS_VHT160), 6745 PEER_PARAM(PEER_NSS_VHT80_80), 6746 PEER_PARAM(PEER_PARAM_SU_TXBF_SOUNDING_INTERVAL), 6747 PEER_PARAM(PEER_PARAM_MU_TXBF_SOUNDING_INTERVAL), 6748 PEER_PARAM(PEER_PARAM_TXBF_SOUNDING_ENABLE), 6749 PEER_PARAM(PEER_PARAM_MU_ENABLE), 6750 PEER_PARAM(PEER_PARAM_OFDMA_ENABLE), 6751 PEER_PARAM(PEER_PARAM_ENABLE_FT), 6752 PEER_PARAM(PEER_CHWIDTH_PUNCTURE_20MHZ_BITMAP), 6753 }; 6754 #define WMI_HOST_PEER_MIMO_PS_NONE 0x0 6755 #define WMI_HOST_PEER_MIMO_PS_STATIC 0x1 6756 #define WMI_HOST_PEER_MIMO_PS_DYNAMIC 0x2 6757 typedef enum { 6758 HOST_PLATFORM_HIGH_PERF, 6759 HOST_PLATFORM_LOW_PERF, 6760 HOST_PLATFORM_LOW_PERF_NO_FETCH, 6761 } HOST_PLATFORM_TYPE; 6762 6763 enum wmi_host_sta_ps_mode { 6764 /** enable power save for the given STA VDEV */ 6765 WMI_HOST_STA_PS_MODE_DISABLED = 0, 6766 /** disable power save for a given STA VDEV */ 6767 WMI_HOST_STA_PS_MODE_ENABLED = 1, 6768 }; 6769 enum wmi_host_sta_powersave_param { 6770 /** 6771 * Controls how frames are retrievd from AP while STA is sleeping 6772 * 6773 * (see enum wmi_sta_ps_param_rx_wake_policy) 6774 */ 6775 WMI_HOST_STA_PS_PARAM_RX_WAKE_POLICY = 0, 6776 6777 /** 6778 * The STA will go active after this many TX 6779 * 6780 * (see enum wmi_sta_ps_param_tx_wake_threshold) 6781 */ 6782 WMI_HOST_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 6783 6784 /** 6785 * Number of PS-Poll to send before STA wakes up 6786 * 6787 * (see enum wmi_sta_ps_param_pspoll_count) 6788 * 6789 */ 6790 WMI_HOST_STA_PS_PARAM_PSPOLL_COUNT = 2, 6791 6792 /** 6793 * TX/RX inactivity time in msec before going to sleep. 6794 * 6795 * The power save SM will monitor tx/rx activity on the VDEV, if no 6796 * activity for the specified msec of the parameter 6797 * the Power save SM will go to sleep. 6798 */ 6799 WMI_HOST_STA_PS_PARAM_INACTIVITY_TIME = 3, 6800 6801 /** 6802 * Set uapsd configuration. 6803 * 6804 * (see enum wmi_sta_ps_param_uapsd) 6805 */ 6806 WMI_HOST_STA_PS_PARAM_UAPSD = 4, 6807 }; 6808 /* prefix used by scan requestor ids on the host 6809 * replicated here form wmi_unified.h*/ 6810 #define WMI_HOST_P_SCAN_REQUESTOR_ID_PREFIX 0xA000 6811 /* prefix used by scan request ids generated on the host */ 6812 /* host cycles through the lower 12 bits to generate ids */ 6813 #define WMI_HOST_P_SCAN_REQ_ID_PREFIX 0xA000 6814 6815 #define WMI_HOST_RC_DS_FLAG 0x01 /* Dual stream flag */ 6816 #define WMI_HOST_RC_CW40_FLAG 0x02 /* CW 40 */ 6817 #define WMI_HOST_RC_SGI_FLAG 0x04 /* Short Guard Interval */ 6818 #define WMI_HOST_RC_HT_FLAG 0x08 /* HT */ 6819 #define WMI_HOST_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ 6820 #define WMI_HOST_RC_TX_STBC_FLAG 0x20 /* TX STBC */ 6821 #define WMI_HOST_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */ 6822 #define WMI_HOST_RC_RX_STBC_FLAG_S 6 /* RX STBC ,2 bits */ 6823 #define WMI_HOST_RC_WEP_TKIP_FLAG 0x100 /* WEP/TKIP encryption */ 6824 #define WMI_HOST_RC_TS_FLAG 0x200 /* Three stream flag */ 6825 #define WMI_HOST_RC_UAPSD_FLAG 0x400 /* UAPSD Rate Control */ 6826 6827 /** HT Capabilities*/ 6828 #define WMI_HOST_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 6829 /* Short Guard Interval with HT20 */ 6830 #define WMI_HOST_HT_CAP_HT20_SGI 0x0002 6831 #define WMI_HOST_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 6832 #define WMI_HOST_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 6833 #define WMI_HOST_HT_CAP_TX_STBC_MASK_SHIFT 3 6834 #define WMI_HOST_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 6835 #define WMI_HOST_HT_CAP_RX_STBC_MASK_SHIFT 4 6836 #define WMI_HOST_HT_CAP_LDPC 0x0040 /* LDPC supported */ 6837 #define WMI_HOST_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 6838 #define WMI_HOST_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 6839 #define WMI_HOST_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 6840 #define WMI_HOST_HT_CAP_HT40_SGI 0x0800 6841 #define WMI_HOST_HT_CAP_RX_LDPC 0x1000 6842 #define WMI_HOST_HT_CAP_TX_LDPC 0x2000 6843 #define WMI_HOST_HT_CAP_IBF_BFER 0x4000 6844 6845 /* These macros should be used when we wish to advertise STBC support for 6846 * only 1SS or 2SS or 3SS. */ 6847 #define WMI_HOST_HT_CAP_RX_STBC_1SS 0x0010 /* B4-B5 RX STBC */ 6848 #define WMI_HOST_HT_CAP_RX_STBC_2SS 0x0020 /* B4-B5 RX STBC */ 6849 #define WMI_HOST_HT_CAP_RX_STBC_3SS 0x0030 /* B4-B5 RX STBC */ 6850 6851 6852 #define WMI_HOST_HT_CAP_DEFAULT_ALL (WMI_HOST_HT_CAP_ENABLED | \ 6853 WMI_HOST_HT_CAP_HT20_SGI | \ 6854 WMI_HOST_HT_CAP_HT40_SGI | \ 6855 WMI_HOST_HT_CAP_TX_STBC | \ 6856 WMI_HOST_HT_CAP_RX_STBC | \ 6857 WMI_HOST_HT_CAP_LDPC) 6858 6859 /* WMI_HOST_VHT_CAP_* these maps to ieee 802.11ac vht capability information 6860 field. The fields not defined here are not supported, or reserved. 6861 Do not change these masks and if you have to add new one follow the 6862 bitmask as specified by 802.11ac draft. 6863 */ 6864 6865 #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 6866 #define WMI_HOST_VHT_CAP_RX_LDPC 0x00000010 6867 #define WMI_HOST_VHT_CAP_SGI_80MHZ 0x00000020 6868 #define WMI_HOST_VHT_CAP_SGI_160MHZ 0x00000040 6869 #define WMI_HOST_VHT_CAP_TX_STBC 0x00000080 6870 #define WMI_HOST_VHT_CAP_RX_STBC_MASK 0x00000300 6871 #define WMI_HOST_VHT_CAP_RX_STBC_MASK_SHIFT 8 6872 #define WMI_HOST_VHT_CAP_SU_BFER 0x00000800 6873 #define WMI_HOST_VHT_CAP_SU_BFEE 0x00001000 6874 #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 6875 #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 6876 #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 6877 #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 6878 #define WMI_HOST_VHT_CAP_MU_BFER 0x00080000 6879 #define WMI_HOST_VHT_CAP_MU_BFEE 0x00100000 6880 #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 6881 #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT 23 6882 #define WMI_HOST_VHT_CAP_RX_FIXED_ANT 0x10000000 6883 #define WMI_HOST_VHT_CAP_TX_FIXED_ANT 0x20000000 6884 6885 #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 6886 6887 /* These macros should be used when we wish to advertise STBC support for 6888 * only 1SS or 2SS or 3SS. */ 6889 #define WMI_HOST_VHT_CAP_RX_STBC_1SS 0x00000100 6890 #define WMI_HOST_VHT_CAP_RX_STBC_2SS 0x00000200 6891 #define WMI_HOST_VHT_CAP_RX_STBC_3SS 0x00000300 6892 6893 #define WMI_HOST_VHT_CAP_DEFAULT_ALL (WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 | \ 6894 WMI_HOST_VHT_CAP_SGI_80MHZ | \ 6895 WMI_HOST_VHT_CAP_TX_STBC | \ 6896 WMI_HOST_VHT_CAP_RX_STBC_MASK | \ 6897 WMI_HOST_VHT_CAP_RX_LDPC | \ 6898 WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 6899 WMI_HOST_VHT_CAP_RX_FIXED_ANT | \ 6900 WMI_HOST_VHT_CAP_TX_FIXED_ANT) 6901 6902 /* Interested readers refer to Rx/Tx MCS Map definition as defined in 6903 802.11ac 6904 */ 6905 #define WMI_HOST_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 6906 #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 6907 #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 6908 6909 /** U-APSD configuration of peer station from (re)assoc request and TSPECs */ 6910 enum wmi_host_ap_ps_param_uapsd { 6911 WMI_HOST_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 6912 WMI_HOST_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 6913 WMI_HOST_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 6914 WMI_HOST_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 6915 WMI_HOST_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 6916 WMI_HOST_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 6917 WMI_HOST_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6918 WMI_HOST_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6919 }; 6920 /** U-APSD maximum service period of peer station */ 6921 enum wmi_host_ap_ps_peer_param_max_sp { 6922 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 6923 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 6924 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 6925 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 6926 6927 /* keep last! */ 6928 MAX_HOST_WMI_AP_PS_PEER_PARAM_MAX_SP, 6929 }; 6930 6931 #define WMI_HOST_UAPSD_AC_TYPE_DELI 0 6932 #define WMI_HOST_UAPSD_AC_TYPE_TRIG 1 6933 6934 #define WMI_HOST_UAPSD_AC_BIT_MASK(ac, type) \ 6935 ((type == WMI_HOST_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) :\ 6936 (1<<((ac<<1)+1))) 6937 6938 enum wmi_host_ap_ps_peer_param_wnm_sleep { 6939 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_ENABLE, 6940 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_DISABLE, 6941 }; 6942 6943 enum wmi_host_ap_ps_peer_param { 6944 /** Set uapsd configuration for a given peer. 6945 * 6946 * This will include the delivery and trigger enabled state for every AC. 6947 * The host MLME needs to set this based on AP capability and stations 6948 * request Set in the association request received from the station. 6949 * 6950 * Lower 8 bits of the value specify the UAPSD configuration. 6951 * 6952 * (see enum wmi_ap_ps_param_uapsd) 6953 * The default value is 0. 6954 */ 6955 WMI_HOST_AP_PS_PEER_PARAM_UAPSD = 0, 6956 6957 /** 6958 * Set the service period for a UAPSD capable station 6959 * 6960 * The service period from wme ie in the (re)assoc request frame. 6961 * 6962 * (see enum wmi_ap_ps_peer_param_max_sp) 6963 */ 6964 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP = 1, 6965 6966 /** Time in seconds for aging out buffered frames 6967 * for STA in power save */ 6968 WMI_HOST_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6969 6970 /** Specify frame types that are considered SIFS 6971 * RESP trigger frame */ 6972 WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3, 6973 6974 /** Specifies the trigger state of TID. 6975 * Valid only for UAPSD frame type */ 6976 WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4, 6977 6978 /** Specifies the WNM sleep state of a STA */ 6979 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP = 5, 6980 }; 6981 #define WMI_HOST_RXERR_CRC 0x01 /* CRC error on frame */ 6982 #define WMI_HOST_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */ 6983 #define WMI_HOST_RXERR_MIC 0x10 /* Michael MIC decrypt error */ 6984 #define WMI_HOST_RXERR_KEY_CACHE_MISS 0x20 /* No/incorrect key matter in h/w */ 6985 #define WMI_HOST_RXERR_PN 0x80 /* invalid PN in frame */ 6986 6987 enum wmi_host_sta_ps_param_rx_wake_policy { 6988 /* Wake up when ever there is an RX activity on the VDEV. In this mode 6989 * the Power save SM(state machine) will come out of sleep by either 6990 * sending null frame (or) a data frame (with PS==0) in response to TIM 6991 * bit set in the received beacon frame from AP. 6992 */ 6993 WMI_HOST_STA_PS_RX_WAKE_POLICY_WAKE = 0, 6994 6995 /* Here the power save state machine will not wakeup in response to TIM 6996 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 6997 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 6998 * access categories are delivery-enabled, the station will send a UAPSD 6999 * trigger frame, otherwise it will send a PS-Poll. 7000 */ 7001 WMI_HOST_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 7002 }; 7003 enum wmi_host_sta_ps_param_pspoll_count { 7004 WMI_HOST_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 7005 /* Values greater than 0 indicate the maximum numer of PS-Poll frames FW 7006 * will send before waking up. 7007 */ 7008 }; 7009 /** Number of tx frames/beacon that cause the power save SM to wake up. 7010 * 7011 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 7012 * meaning, It will cause the SM to never wake up. This is useful if you want 7013 * to keep the system to sleep all the time for some kind of test mode . host 7014 * can change this parameter any time. It will affect at the next tx frame. 7015 */ 7016 enum wmi_host_sta_ps_param_tx_wake_threshold { 7017 WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 7018 WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 7019 7020 /* Values greater than one indicate that many TX attempts per beacon 7021 * interval before the STA will wake up 7022 */ 7023 }; 7024 /* 7025 * Transmit power scale factor. 7026 * 7027 */ 7028 typedef enum { 7029 WMI_HOST_TP_SCALE_MAX = 0, /* no scaling (default) */ 7030 WMI_HOST_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 7031 WMI_HOST_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 7032 WMI_HOST_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 7033 WMI_HOST_TP_SCALE_6 = 4, /* 6% of max (-12 dBm) */ 7034 WMI_HOST_TP_SCALE_MIN = 5, /* min, but still on */ 7035 WMI_HOST_TP_SCALE_SIZE = 6, /* max num of enum */ 7036 } WMI_HOST_TP_SCALE; 7037 enum { 7038 WMI_HOST_RATEPWR_TABLE_OPS_SET, 7039 WMI_HOST_RATEPWR_TABLE_OPS_GET, 7040 }; 7041 /* reserved up through 0xF */ 7042 /** 7043 * struct wmi_host_dcs_mib_stats - WLAN IM stats from target to host 7044 * Below statistics are sent from target to host periodically. 7045 * These are collected at target as long as target is running 7046 * and target chip is not in sleep. 7047 * @listen_time: 7048 * @reg_tx_frame_cnt: 7049 * @reg_rx_frame_cnt: 7050 * @reg_rxclr_cnt: 7051 * @reg_cycle_cnt: delta cycle count 7052 * @reg_rxclr_ext_cnt: 7053 * @reg_ofdm_phyerr_cnt: 7054 * @reg_cck_phyerr_cnt: CCK err count since last reset, read from register 7055 */ 7056 typedef struct _hp_dcs_mib_stats { 7057 int32_t listen_time; 7058 uint32_t reg_tx_frame_cnt; 7059 uint32_t reg_rx_frame_cnt; 7060 uint32_t reg_rxclr_cnt; 7061 uint32_t reg_cycle_cnt; 7062 uint32_t reg_rxclr_ext_cnt; 7063 uint32_t reg_ofdm_phyerr_cnt; 7064 uint32_t reg_cck_phyerr_cnt; 7065 } wmi_host_dcs_mib_stats_t; 7066 7067 /** 7068 * struct wmi_host_dcs_im_tgt_stats - DCS IM target stats 7069 * @reg_tsf32: current running TSF from the TSF-1 7070 * @last_ack_rssi: Known last frame rssi, in case of multiple stations, if 7071 * and at different ranges, this would not gaurantee that 7072 * this is the least rssi. 7073 * @tx_waste_time: Sum of all the failed durations in the last 7074 * one second interval. 7075 * @rx_time: count how many times the hal_rxerr_phy is marked, in this 7076 * time period 7077 * @phyerr_cnt: 7078 * @mib_stats: wmi_host_dcs_mib_stats_t - collected mib stats as explained 7079 * in mib structure 7080 * @chan_nf: Channel noise floor (Units are in dBm) 7081 * @my_bss_rx_cycle_count: BSS rx cycle count 7082 * @reg_rxclr_ext40_cnt: extension channel 40Mhz rxclear count 7083 * @reg_rxclr_ext80_cnt: extension channel 80Mhz rxclear count 7084 */ 7085 typedef struct _wmi_host_dcs_im_tgt_stats { 7086 uint32_t reg_tsf32; 7087 uint32_t last_ack_rssi; 7088 uint32_t tx_waste_time; 7089 uint32_t rx_time; 7090 uint32_t phyerr_cnt; 7091 wmi_host_dcs_mib_stats_t mib_stats; 7092 uint32_t chan_nf; 7093 uint32_t my_bss_rx_cycle_count; 7094 /* these fields are added here for backward compatibility instead of 7095 * wmi_host_dcs_mib_stats_t 7096 */ 7097 uint32_t reg_rxclr_ext40_cnt; 7098 uint32_t reg_rxclr_ext80_cnt; 7099 } wmi_host_dcs_im_tgt_stats_t; 7100 7101 #ifndef BIT 7102 #define BIT(n) (1 << (n)) 7103 #endif 7104 7105 /** 7106 * Enum for pktlog req 7107 */ 7108 enum { 7109 WMI_HOST_PKTLOG_EVENT_RX_BIT, 7110 WMI_HOST_PKTLOG_EVENT_TX_BIT, 7111 WMI_HOST_PKTLOG_EVENT_RCF_BIT, 7112 WMI_HOST_PKTLOG_EVENT_RCU_BIT, 7113 WMI_HOST_PKTLOG_EVENT_DBG_PRINT_BIT, 7114 WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA_BIT, 7115 WMI_HOST_PKTLOG_EVENT_H_INFO_BIT, 7116 WMI_HOST_PKTLOG_EVENT_STEERING_BIT, 7117 WMI_HOST_PKTLOG_EVENT_TX_DATA_CAPTURE_BIT, 7118 WMI_HOST_PKTLOG_EVENT_PHY_LOGGING_BIT, 7119 WMI_HOST_PKTLOG_EVENT_CBF_BIT, 7120 #ifdef BE_PKTLOG_SUPPORT 7121 WMI_HOST_PKTLOG_EVENT_HYBRID_TX_BIT, 7122 #endif 7123 }; 7124 7125 typedef enum { 7126 WMI_HOST_PKTLOG_EVENT_RX = BIT(WMI_HOST_PKTLOG_EVENT_RX_BIT), 7127 WMI_HOST_PKTLOG_EVENT_TX = BIT(WMI_HOST_PKTLOG_EVENT_TX_BIT), 7128 WMI_HOST_PKTLOG_EVENT_RCF = 7129 BIT(WMI_HOST_PKTLOG_EVENT_RCF_BIT), /* Rate Control Find */ 7130 WMI_HOST_PKTLOG_EVENT_RCU = 7131 BIT(WMI_HOST_PKTLOG_EVENT_RCU_BIT), /* Rate Control Update */ 7132 WMI_HOST_PKTLOG_EVENT_DBG_PRINT = 7133 BIT(WMI_HOST_PKTLOG_EVENT_DBG_PRINT_BIT), /* DEBUG prints */ 7134 /* To support Smart Antenna */ 7135 WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA = 7136 BIT(WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA_BIT), 7137 WMI_HOST_PKTLOG_EVENT_H_INFO = 7138 BIT(WMI_HOST_PKTLOG_EVENT_H_INFO_BIT), 7139 WMI_HOST_PKTLOG_EVENT_STEERING = 7140 BIT(WMI_HOST_PKTLOG_EVENT_STEERING_BIT), 7141 /* To support Tx data Capture */ 7142 WMI_HOST_PKTLOG_EVENT_TX_DATA_CAPTURE = 7143 BIT(WMI_HOST_PKTLOG_EVENT_TX_DATA_CAPTURE_BIT), 7144 /* To support PHY logging */ 7145 WMI_HOST_PKTLOG_EVENT_PHY_LOGGING = 7146 BIT(WMI_HOST_PKTLOG_EVENT_PHY_LOGGING_BIT), 7147 WMI_HOST_PKTLOG_EVENT_CBF = 7148 BIT(WMI_HOST_PKTLOG_EVENT_CBF_BIT), 7149 #ifdef BE_PKTLOG_SUPPORT 7150 WMI_HOST_PKTLOG_EVENT_HYBRID_TX = 7151 BIT(WMI_HOST_PKTLOG_EVENT_HYBRID_TX_BIT), 7152 #endif 7153 } WMI_HOST_PKTLOG_EVENT; 7154 7155 /** 7156 * wmi_host_phyerr 7157 * 7158 */ 7159 #define WMI_HOST_PHY_ERROR_SPECTRAL_SCAN 0x26 7160 #define WMI_HOST_PHY_ERROR_FALSE_RADAR_EXT 0x24 7161 7162 #define WMI_HOST_AR900B_DFS_PHYERR_MASK 0x4 7163 #define WMI_HOST_AR900B_SPECTRAL_PHYERR_MASK 0x4000000 7164 7165 /** 7166 * struct wmi_host_perchain_rssi_info - per chain RSSI info 7167 * @rssi_pri20: RSSI on primary 20 7168 * @rssi_sec20: RSSI on secomdary 20 7169 * @rssi_sec40: RSSI secondary 40 7170 * @rssi_sec80: RSSI secondary 80 7171 */ 7172 typedef struct wmi_host_perchain_rssi_info { 7173 int8_t rssi_pri20; 7174 int8_t rssi_sec20; 7175 int8_t rssi_sec40; 7176 int8_t rssi_sec80; 7177 } wmi_host_perchain_rssi_info_t; 7178 7179 /** 7180 * struct _wmi_host_rf_info - RF measurement information 7181 * @rssi_comb: RSSI Information 7182 * @pc_rssi_info[4]: For now, we know we are getting information 7183 * for only 4 chains at max. For future extensions 7184 * use a define 7185 * @noise_floor: Noise floor information 7186 */ 7187 typedef struct _wmi_host_rf_info { 7188 int8_t rssi_comb; 7189 wmi_host_perchain_rssi_info_t pc_rssi_info[4]; 7190 int16_t noise_floor[4]; 7191 } wmi_host_rf_info_t; 7192 7193 /** 7194 * struct _wmi_host_chan_info 7195 * @center_freq1: center frequency 1 in MHz 7196 * @center_freq2: center frequency 2 in MHz -valid only for 7197 * 11ACVHT 80PLUS80 mode 7198 * @chan_width: channel width in MHz 7199 */ 7200 typedef struct _wmi_host_chan_info { 7201 u_int16_t center_freq1; 7202 u_int16_t center_freq2; 7203 u_int8_t chan_width; 7204 } wmi_host_chan_info_t; 7205 7206 /** 7207 * struct wmi_host_phyerr 7208 * @rf_info: 7209 * @chan_info: 7210 * @tsf64: 7211 * @phy_err_code: 7212 * @tsf_timestamp: 7213 * @bufp: 7214 * @buf_len: 7215 * @phy_err_mask0: 7216 * @phy_err_mask1: 7217 * @pdev_id: pdev_id 7218 */ 7219 typedef struct _wmi_host_phyerr { 7220 wmi_host_rf_info_t rf_info; 7221 wmi_host_chan_info_t chan_info; 7222 uint64_t tsf64; 7223 int32_t phy_err_code; 7224 uint32_t tsf_timestamp; 7225 uint8_t *bufp; 7226 uint32_t buf_len; 7227 uint32_t phy_err_mask0; 7228 uint32_t phy_err_mask1; 7229 uint32_t pdev_id; 7230 } wmi_host_phyerr_t; 7231 7232 /** 7233 * struct wmi_host_rtt_event_hdr 7234 * @req_id: request id 7235 * @status: status 7236 * @meas_done: measurement done flag 7237 * @meas_type: measurement type 7238 * @report_type: report type 7239 * @v3_status: v2 status 7240 * @v3_finish: 7241 * @v3_tm_start: 7242 * @num_ap: number of AP 7243 * @result: resuult 7244 * @dest_mac: destination mac 7245 */ 7246 typedef struct { 7247 uint16_t req_id; 7248 uint16_t status:1, 7249 meas_done:1, 7250 meas_type:3, 7251 report_type:3, 7252 v3_status:2, 7253 v3_finish:1, 7254 v3_tm_start:1, 7255 num_ap:4; 7256 uint16_t result; 7257 uint8_t dest_mac[QDF_MAC_ADDR_SIZE]; 7258 } wmi_host_rtt_event_hdr; 7259 7260 /** 7261 * struct wmi_host_rtt_meas_event - RTT measurement event 7262 * @chain_mask: 7263 * @bw: 7264 * @rsvd: 7265 * @txrxchain_mask: Bit:0-3:chain mask 7266 * Bit 4-5: band width info 7267 * 00 --Legacy 20, 01 --HT/VHT20 7268 * 10 --HT/VHT40, 11 -- VHT80 7269 * @tod: resolution of 0.1ns 7270 * @toa: resolution of 0.1ns 7271 * @t3: 7272 * @t4: 7273 * @rssi0: 7274 * @rssi1: 7275 * @rssi2: 7276 * @rssi3: 7277 */ 7278 typedef struct { 7279 uint32_t chain_mask:3, 7280 bw:2, 7281 rsvd:27; 7282 uint32_t txrxchain_mask; 7283 uint64_t tod; 7284 uint64_t toa; 7285 uint64_t t3; 7286 uint64_t t4; 7287 uint32_t rssi0; 7288 uint32_t rssi1; 7289 uint32_t rssi2; 7290 uint32_t rssi3; 7291 } wmi_host_rtt_meas_event; 7292 7293 /*----RTT Report event definition ----*/ 7294 typedef enum { 7295 /* rtt cmd header parsing error --terminate */ 7296 WMI_HOST_RTT_COMMAND_HEADER_ERROR = 0, 7297 /* rtt body parsing error -- skip current STA REQ */ 7298 WMI_HOST_RTT_COMMAND_ERROR, 7299 /* rtt no resource -- terminate */ 7300 WMI_HOST_RTT_MODULE_BUSY, 7301 /* STA exceed the support limit -- only server the first n STA */ 7302 WMI_HOST_RTT_TOO_MANY_STA, 7303 /* any allocate failure */ 7304 WMI_HOST_RTT_NO_RESOURCE, 7305 /* can not find vdev with vdev ID - skip current STA REQ */ 7306 WMI_HOST_RTT_VDEV_ERROR, 7307 /* Tx failure -- continiue and measure number */ 7308 WMI_HOST_RTT_TRANSIMISSION_ERROR, 7309 /* wait for first TM timer expire-terminate current STA measurement */ 7310 WMI_HOST_RTT_TM_TIMER_EXPIRE, 7311 /* we do not support RTT measurement with this type of frame */ 7312 WMI_HOST_RTT_FRAME_TYPE_NOSUPPORT, 7313 /* whole RTT measurement timer expire-terminate 7314 ** current STA measurement */ 7315 WMI_HOST_RTT_TIMER_EXPIRE, 7316 /* channel swicth failed */ 7317 WMI_HOST_RTT_CHAN_SWITCH_ERROR, 7318 /* TMR trans error, this dest peer will be skipped */ 7319 WMI_HOST_RTT_TMR_TRANS_ERROR, 7320 /* V3 only. If both CFR and Token mismatch, do not report */ 7321 WMI_HOST_RTT_NO_REPORT_BAD_CFR_TOKEN, 7322 /* For First TM, if CFR is bad, then do not report */ 7323 WMI_HOST_RTT_NO_REPORT_FIRST_TM_BAD_CFR, 7324 /* do not allow report type2 mix with type 0, 1 */ 7325 WMI_HOST_RTT_REPORT_TYPE2_MIX, 7326 /* LCI Configuration OK. - Responder only */ 7327 WMI_HOST_RTT_LCI_CFG_OK, 7328 /* LCR configuration OK. - Responder only */ 7329 WMI_HOST_RTT_LCR_CFG_OK, 7330 /* Bad configuration LCI (or) LCR request - Responder only */ 7331 WMI_HOST_RTT_CFG_ERROR, 7332 WMI_HOST_WMI_RTT_REJECT_MAX, 7333 } WMI_HOST_RTT_ERROR_INDICATOR; 7334 typedef struct { 7335 wmi_host_rtt_event_hdr hdr; 7336 WMI_HOST_RTT_ERROR_INDICATOR reject_reason; 7337 } wmi_host_rtt_error_report_event; 7338 7339 #if defined(AR9888) 7340 typedef enum { 7341 WMI_HOST_PROF_CPU_IDLE, 7342 WMI_HOST_PROF_PPDU_PROC, 7343 WMI_HOST_PROF_PPDU_POST, 7344 WMI_HOST_PROF_HTT_TX_INPUT, 7345 WMI_HOST_PROF_MSDU_ENQ, 7346 WMI_HOST_PROF_PPDU_POST_HAL, 7347 WMI_HOST_PROF_COMPUTE_TX_TIME, 7348 7349 /* Add new ID's above this. */ 7350 WMI_HOST_PROF_MAX_ID, 7351 } wmi_host_profile_id_t; 7352 #endif 7353 7354 #define WMI_HOST_WLAN_PROFILE_MAX_HIST 3 7355 #define WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 32 7356 7357 #if defined(AR9888) 7358 #define WMI_HOST_MAX_PROFILE WMI_HOST_PROF_MAX_ID 7359 #else 7360 #define WMI_HOST_MAX_PROFILE WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 7361 #endif 7362 7363 /** 7364 * struct wmi_host_wlan_profile - Host profile param 7365 * @id: profile id 7366 * @cnt: Count 7367 * @tot: 7368 * @min: minimum 7369 * @max: Mac 7370 * @hist_intvl: history interval 7371 * @hist: profile data history 7372 */ 7373 typedef struct { 7374 uint32_t id; 7375 uint32_t cnt; 7376 uint32_t tot; 7377 uint32_t min; 7378 uint32_t max; 7379 uint32_t hist_intvl; 7380 uint32_t hist[WMI_HOST_WLAN_PROFILE_MAX_HIST]; 7381 } wmi_host_wlan_profile_t; 7382 7383 /** 7384 * struct wmi_host_wlan_profile_ctx_t - profile context 7385 * @tot: time in us 7386 * @tx_msdu_cnt: MSDU TX count 7387 * @tx_mpdu_cnt: MPDU tx count 7388 * @tx_ppdu_cnt: PPDU tx count 7389 * @rx_msdu_cnt: MSDU RX count 7390 * @rx_mpdu_cnt: MPDU RXcount 7391 * @bin_count: Bin count 7392 */ 7393 typedef struct { 7394 uint32_t tot; 7395 uint32_t tx_msdu_cnt; 7396 uint32_t tx_mpdu_cnt; 7397 uint32_t tx_ppdu_cnt; 7398 uint32_t rx_msdu_cnt; 7399 uint32_t rx_mpdu_cnt; 7400 uint32_t bin_count; 7401 } wmi_host_wlan_profile_ctx_t; 7402 7403 /** 7404 * struct wmi_host_pdev_bss_chan_info_event 7405 * @pdev_id: pdev_id 7406 * @freq: Units in MHz 7407 * @noise_floor: units are dBm 7408 * @rx_clear_count_low: 7409 * @rx_clear_count_high: 7410 * @cycle_count_low: 7411 * @cycle_count_high: 7412 * @tx_cycle_count_low: 7413 * @tx_cycle_count_high: 7414 * @rx_cycle_count_low: 7415 * @rx_cycle_count_high: 7416 * @rx_bss_cycle_count_low: 7417 * @rx_bss_cycle_count_high: 7418 * @reserved: 7419 */ 7420 typedef struct { 7421 uint32_t pdev_id; 7422 uint32_t freq; 7423 uint32_t noise_floor; 7424 uint32_t rx_clear_count_low; 7425 uint32_t rx_clear_count_high; 7426 uint32_t cycle_count_low; 7427 uint32_t cycle_count_high; 7428 uint32_t tx_cycle_count_low; 7429 uint32_t tx_cycle_count_high; 7430 uint32_t rx_cycle_count_low; 7431 uint32_t rx_cycle_count_high; 7432 uint32_t rx_bss_cycle_count_low; 7433 uint32_t rx_bss_cycle_count_high; 7434 uint32_t reserved; 7435 } wmi_host_pdev_bss_chan_info_event; 7436 7437 /** 7438 * struct wmi_host_pdev_ctl_failsafe_event 7439 * @ctl_failsafe_status: Indicate if Failsafe value is imposed on CTL 7440 */ 7441 struct wmi_host_pdev_ctl_failsafe_event { 7442 uint32_t ctl_failsafe_status; 7443 }; 7444 7445 #define WMI_HOST_INST_STATS_INVALID_RSSI 0 7446 7447 /* Event definition and new structure addition to send event 7448 * to host to block/unblock tx data traffic based on peer_ast_idx or vdev id 7449 */ 7450 #define WMI_HOST_INVALID_PEER_AST_INDEX 0xffff 7451 #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_BLOCK 0x1 7452 #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_UNBLOCK 0x2 7453 /** 7454 * struct wmi_host_tx_data_traffic_ctrl_event 7455 * @peer_ast_idx: For vdev based control, peer_ast_idx will be 7456 * WMI_INVALID_PEER_AST_INDEX 7457 * @vdev_id: only applies if peer_ast_idx == INVALID 7458 * @ctrl_cmd: WMI_TX_DATA_TRAFFIC_CTRL_BLOCK or 7459 * WMI_TX_DATA_TRAFFIC_CTRL_UNBLOCK 7460 * @wmm_ac: Indicates AC to be blocked or unblocked 7461 * Bits 4-31 : Reserved (Shall be zero) 7462 * Bits 0-3 : WMM AC NO [ BE (1), BK (2), VI (3), VO (4)] 7463 * Started numbering from 1 to preserve backward compatibility 7464 */ 7465 typedef struct { 7466 uint32_t peer_ast_idx; 7467 uint32_t vdev_id; 7468 uint32_t ctrl_cmd; 7469 uint32_t wmm_ac; 7470 } wmi_host_tx_data_traffic_ctrl_event; 7471 7472 /** 7473 * struct wmi_host_ath_dcs_cw_int 7474 * @channel: either number or freq in mhz 7475 */ 7476 typedef struct { 7477 uint32_t channel; 7478 } wmi_host_ath_dcs_cw_int; 7479 7480 /** 7481 * struct wmi_host_dcs_awgn_info: 7482 * @channel_width : Channel width of interference 7483 * @center_freq : Center frequency of primary channel 7484 * @center_freq0 : Center frequency of segment 1 7485 * @center_freq1 : Center frequency of segment 2 7486 * @chan_bw_intf_bitmap: Per-20MHz interference bitmap 7487 */ 7488 struct wmi_host_dcs_awgn_info { 7489 wmi_host_channel_width channel_width; 7490 uint32_t center_freq; 7491 uint32_t center_freq0; 7492 uint32_t center_freq1; 7493 uint32_t chan_bw_intf_bitmap; 7494 }; 7495 7496 #define WMI_MAX_POWER_DBG_ARGS 8 7497 7498 /** 7499 * struct wmi_power_dbg_params - power debug command parameter 7500 * @pdev_id: subsystem identifier 7501 * @module_id: parameter id 7502 * @num_arg: no of arguments 7503 * @args: arguments 7504 */ 7505 struct wmi_power_dbg_params { 7506 uint32_t pdev_id; 7507 uint32_t module_id; 7508 uint32_t num_args; 7509 uint32_t args[WMI_MAX_POWER_DBG_ARGS]; 7510 }; 7511 7512 /** 7513 * struct wmi_fw_dump_seg_req - individual segment details 7514 * @seg_id - segment id. 7515 * @seg_start_addr_lo - lower address of the segment. 7516 * @seg_start_addr_hi - higher address of the segment. 7517 * @seg_length - length of the segment. 7518 * @dst_addr_lo - lower address of the destination buffer. 7519 * @dst_addr_hi - higher address of the destination buffer. 7520 * 7521 * This structure carries the information to firmware about the 7522 * individual segments. This structure is part of firmware memory 7523 * dump request. 7524 */ 7525 struct wmi_fw_dump_seg_req { 7526 uint8_t seg_id; 7527 uint32_t seg_start_addr_lo; 7528 uint32_t seg_start_addr_hi; 7529 uint32_t seg_length; 7530 uint32_t dst_addr_lo; 7531 uint32_t dst_addr_hi; 7532 }; 7533 7534 /** 7535 * enum wmi_userspace_log_level - Log level at userspace 7536 * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection 7537 * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log 7538 * level with minimal user impact. This is the default value. 7539 * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily 7540 * trying to reproduce a problem, wifi performances and power can be impacted 7541 * but device should not otherwise be significantly impacted 7542 * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to 7543 * actively debug a problem 7544 * 7545 * Various log levels defined in the userspace for logging applications 7546 */ 7547 enum wmi_userspace_log_level { 7548 WMI_LOG_LEVEL_NO_COLLECTION, 7549 WMI_LOG_LEVEL_NORMAL_COLLECT, 7550 WMI_LOG_LEVEL_ISSUE_REPRO, 7551 WMI_LOG_LEVEL_ACTIVE, 7552 }; 7553 7554 /** 7555 * HW mode config type replicated from FW header 7556 * @WMI_HOST_HW_MODE_SINGLE: Only one PHY is active. 7557 * @WMI_HOST_HW_MODE_DBS: Both PHYs are active in different bands, 7558 * one in 2G and another in 5G. 7559 * @WMI_HOST_HW_MODE_SBS_PASSIVE: Both PHYs are in passive mode (only rx) in 7560 * same band; no tx allowed. 7561 * @WMI_HOST_HW_MODE_SBS: Both PHYs are active in the same band. 7562 * Support for both PHYs within one band is planned 7563 * for 5G only(as indicated in WMI_MAC_PHY_CAPABILITIES), 7564 * but could be extended to other bands in the future. 7565 * The separation of the band between the two PHYs needs 7566 * to be communicated separately. 7567 * @WMI_HOST_HW_MODE_DBS_SBS: 3 PHYs, with 2 on the same band doing SBS 7568 * as in WMI_HW_MODE_SBS, and 3rd on the other band 7569 * @WMI_HOST_HW_MODE_DBS_OR_SBS: Two PHY with one PHY capabale of both 2G and 7570 * 5G. It can support SBS (5G + 5G) OR DBS (5G + 2G). 7571 * @WMI_HOST_HW_MODE_FW_INTERNAL: FW specific internal mode 7572 * @WMI_HOST_HW_MODE_2G_PHYB: Only one phy is active. 2G mode on PhyB. 7573 * @WMI_HOST_HW_MODE_MAX: Max hw_mode_id. Used to indicate invalid mode. 7574 * @WMI_HOST_HW_MODE_DETECT: Mode id used by host to choose mode from target 7575 * supported modes. 7576 */ 7577 enum wmi_host_hw_mode_config_type { 7578 WMI_HOST_HW_MODE_SINGLE = 0, 7579 WMI_HOST_HW_MODE_DBS = 1, 7580 WMI_HOST_HW_MODE_SBS_PASSIVE = 2, 7581 WMI_HOST_HW_MODE_SBS = 3, 7582 WMI_HOST_HW_MODE_DBS_SBS = 4, 7583 WMI_HOST_HW_MODE_DBS_OR_SBS = 5, 7584 WMI_HOST_HW_MODE_FW_INTERNAL = 6, 7585 WMI_HOST_HW_MODE_2G_PHYB = 7, 7586 WMI_HOST_HW_MODE_MAX, 7587 WMI_HOST_HW_MODE_DETECT, 7588 }; 7589 7590 /** 7591 * enum wmi_host_dynamic_hw_mode_config_type - Host defined enum for 7592 * dynamic mode switch 7593 * @WMI_HOST_DYNAMIC_HW_MODE_DISABLED: hw mode switch is disabled 7594 * @WMI_HOST_DYNAMIC_HW_MODE_SLOW: hw mode switch with interface down/up 7595 * @WMI_HOST_DYNAMIC_HW_MODE_FAST: hw mode switch without interface down/up 7596 * @WMI_HOST_DYNAMIC_HW_MODE_MAX: Max value to indicate invalid mode 7597 */ 7598 enum wmi_host_dynamic_hw_mode_config_type { 7599 WMI_HOST_DYNAMIC_HW_MODE_DISABLED = 0, 7600 WMI_HOST_DYNAMIC_HW_MODE_SLOW = 1, 7601 WMI_HOST_DYNAMIC_HW_MODE_FAST = 2, 7602 WMI_HOST_DYNAMIC_HW_MODE_MAX, 7603 }; 7604 7605 /* 7606 * struct wmi_host_peer_txmu_cnt_event 7607 * @tx_mu_transmitted - MU-MIMO tx count 7608 */ 7609 typedef struct { 7610 uint32_t tx_mu_transmitted; 7611 } wmi_host_peer_txmu_cnt_event; 7612 7613 /** 7614 * struct esp_estimation_event - esp airtime estimation event 7615 * @ac_airtime_percentage: Estimated Airtime 7616 * @pdev_id: PDEV_ID of Data 7617 */ 7618 struct esp_estimation_event { 7619 uint32_t ac_airtime_percentage; 7620 uint32_t pdev_id; 7621 }; 7622 7623 /* 7624 * struct wmi_peer_gid_userpos_list_event 7625 * @usr_list - User list 7626 */ 7627 #define GID_OVERLOAD_GROUP_COUNT 15 7628 typedef struct { 7629 uint32_t usr_list[GID_OVERLOAD_GROUP_COUNT]; 7630 } wmi_host_peer_gid_userpos_list_event; 7631 7632 /** 7633 * enum rcpi_measurement_type - for identifying type of rcpi measurement 7634 * @RCPI_MEASUREMENT_TYPE_AVG_MGMT: avg rcpi of mgmt frames 7635 * @RCPI_MEASUREMENT_TYPE_AVG_DATA: avg rcpi of data frames 7636 * @RCPI_MEASUREMENT_TYPE_LAST_MGMT: rcpi of last mgmt frame 7637 * @RCPI_MEASUREMENT_TYPE_LAST_DATA: rcpi of last data frame 7638 * @RCPI_MEASUREMENT_TYPE_INVALID: invalid rcpi measurement type 7639 */ 7640 enum rcpi_measurement_type { 7641 RCPI_MEASUREMENT_TYPE_AVG_MGMT = 0x1, 7642 RCPI_MEASUREMENT_TYPE_AVG_DATA = 0x2, 7643 RCPI_MEASUREMENT_TYPE_LAST_MGMT = 0x3, 7644 RCPI_MEASUREMENT_TYPE_LAST_DATA = 0x4, 7645 RCPI_MEASUREMENT_TYPE_INVALID = 0x5, 7646 }; 7647 7648 /** 7649 * struct rcpi_req - RCPI req parameter 7650 * @vdev_id: virtual device id 7651 * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type 7652 * @mac_addr: peer mac addr for which measurement is required 7653 */ 7654 struct rcpi_req { 7655 uint32_t vdev_id; 7656 enum rcpi_measurement_type measurement_type; 7657 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 7658 }; 7659 7660 /** 7661 * struct rcpi_res - RCPI response parameter 7662 * @vdev_id: virtual device id 7663 * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type 7664 * @mac_addr: peer mac addr for which measurement is required 7665 * @rcpi_value: value of RCPI computed by firmware 7666 */ 7667 struct rcpi_res { 7668 uint32_t vdev_id; 7669 enum rcpi_measurement_type measurement_type; 7670 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 7671 int32_t rcpi_value; 7672 }; 7673 7674 #define WMI_HOST_BOARD_MCN_STRING_MAX_SIZE 19 7675 #define WMI_HOST_BOARD_MCN_STRING_BUF_SIZE \ 7676 (WMI_HOST_BOARD_MCN_STRING_MAX_SIZE+1) /* null-terminator */ 7677 7678 /** 7679 * enum WMI_HOST_CALIBRATION_STATUS - Host defined Enums for cal status 7680 * @WMI_HOST_NO_FEATURE: The board was calibrated with a meta 7681 * which did not have this feature 7682 * @WMI_HOST_CALIBRATION_OK: The calibration status is OK 7683 * @WMI_HOST_CALIBRATION_NOT_OK: The calibration status is NOT OK 7684 */ 7685 enum WMI_HOST_CALIBRATION_STATUS { 7686 WMI_HOST_NO_FEATURE = 0, 7687 WMI_HOST_CALIBRATION_OK, 7688 WMI_HOST_CALIBRATION_NOT_OK, 7689 }; 7690 7691 /** 7692 * struct wmi_host_pdev_utf_event - Host defined struct to hold utf event data 7693 * @data: Pointer to data 7694 * @datalen: Data length 7695 * @pdev_id: Pdev_id of data 7696 * 7697 */ 7698 struct wmi_host_pdev_utf_event { 7699 uint8_t *data; 7700 uint16_t datalen; 7701 uint32_t pdev_id; 7702 }; 7703 7704 /** 7705 * struct wmi_host_utf_seg_header_info - Host defined struct to map seg info in 7706 * UTF event 7707 * @len: segment length 7708 * @msgref: message reference 7709 * @segment_info: segment info 7710 * @pdev_id: pdev_id 7711 * 7712 */ 7713 struct wmi_host_utf_seg_header_info { 7714 uint32_t len; 7715 uint32_t msgref; 7716 uint32_t segment_info; 7717 uint32_t pdev_id; 7718 }; 7719 7720 /** 7721 * struct wmi_host_pdev_qvit_event - Host defined struct to hold qvit event data 7722 * @data: Pointer to data 7723 * @datalen: Data length 7724 * 7725 */ 7726 struct wmi_host_pdev_qvit_event { 7727 uint8_t *data; 7728 uint16_t datalen; 7729 uint32_t pdev_id; 7730 }; 7731 7732 /** 7733 * enum wmi_peer_create_status - Peer Create response status 7734 * @WMI_PEER_CREATE_SUCCESS: Peer creation successful at fw 7735 * @WMI_PEER_EXISTS: Peer with same mac exists at fw 7736 * @WMI_PEER_CREATE_FAILED: Peer creation failed at fw 7737 */ 7738 enum wmi_peer_create_status { 7739 WMI_PEER_CREATE_SUCCESS = 0, 7740 WMI_PEER_EXISTS = 1, 7741 WMI_PEER_CREATE_FAILED = 2, 7742 }; 7743 7744 /** 7745 * @struct wmi_host_dcs_interference_param 7746 * @interference_type: Type of DCS Interference 7747 * @uint32_t pdev_id: pdev id 7748 */ 7749 struct wmi_host_dcs_interference_param { 7750 uint32_t interference_type; 7751 uint32_t pdev_id; 7752 }; 7753 7754 /** 7755 * struct wmi_host_rf_characterization_event_param - rf characterization table 7756 * @freq: center frequency of primary channel (in MHz) 7757 * @chan_metric: primary channel-specific metric 7758 * @bw: bandwidth of primary channel (in MHz) 7759 */ 7760 struct wmi_host_rf_characterization_event_param { 7761 uint16_t freq; 7762 uint8_t chan_metric; 7763 wmi_host_channel_width bw; 7764 }; 7765 7766 /* 7767 * struct wmi_host_fips_event_param: FIPS event param 7768 * @pdev_id: pdev id 7769 * @error_status: Error status: 0 (no err), 1, or OPER_TIMEOUR 7770 * @data_len: FIPS data length 7771 * @data: pointer to data 7772 */ 7773 struct wmi_host_fips_event_param { 7774 uint32_t pdev_id; 7775 uint32_t error_status; 7776 uint32_t data_len; 7777 uint32_t *data; 7778 }; 7779 7780 #ifdef WLAN_FEATURE_FIPS_BER_CCMGCM 7781 /* 7782 * struct wmi_host_fips_extend_event_param: FIPS extend event param 7783 * @pdev_id: pdev id 7784 * @fips_cookie: fips_cookie 7785 * @cmd_frag_idx: cmd_frag_idx 7786 * @more_bit: more_bit 7787 * @error_status: Error status: 0 (no err), 1, or OPER_TIMEOUR 7788 * @data_len: FIPS data length 7789 * @data: pointer to data 7790 */ 7791 struct wmi_host_fips_extend_event_param { 7792 uint32_t pdev_id; 7793 uint32_t fips_cookie; 7794 uint32_t cmd_frag_idx; 7795 uint32_t more_bit; 7796 uint32_t error_status; 7797 uint32_t data_len; 7798 uint32_t *data; 7799 }; 7800 #endif 7801 7802 #ifdef WLAN_FEATURE_DISA_FIPS 7803 /** 7804 * struct disa_encrypt_decrypt_resp_params - disa encrypt response 7805 * @vdev_id: vdev id 7806 * @status: status 7807 * @data_length: data length 7808 * @data: data pointer 7809 */ 7810 struct disa_encrypt_decrypt_resp_params { 7811 uint32_t vdev_id; 7812 int32_t status; 7813 uint32_t data_len; 7814 uint8_t *data; 7815 }; 7816 #endif 7817 7818 /** 7819 * struct wmi_host_proxy_ast_reserve_param 7820 * @pdev_id: pdev id 7821 * @result: result 7822 */ 7823 struct wmi_host_proxy_ast_reserve_param { 7824 uint32_t pdev_id; 7825 uint32_t result; 7826 }; 7827 7828 /** 7829 * struct wmi_host_pdev_band_to_mac - freq range for mac 7830 * @pdev_id: PDEV ID to identifiy mac 7831 * @start_freq: start frequency value 7832 * @end_freq: end frequency value 7833 */ 7834 struct wmi_host_pdev_band_to_mac { 7835 uint32_t pdev_id; 7836 uint32_t start_freq; 7837 uint32_t end_freq; 7838 }; 7839 #define WMI_HOST_MAX_PDEV 3 7840 7841 #ifdef OL_ATH_SMART_LOGGING 7842 7843 #define WMI_HOST_SMART_LOG_SCENARIO_SET(flag, scenario) ((flag) |= (scenario)) 7844 #define WMI_HOST_SMART_LOG_SCENARIO_GET(flag, scenario) ((flag) & (scenario)) 7845 7846 /** 7847 * enum wmi_host_smart_log_scenario - Smart log scenarios to be enabled/disabled 7848 * @WMI_HOST_SMART_LOG_ALL: All smart logging features. 7849 * @WMI_HOST_SMART_LOG_CE_FULL_DETECT_BY_FW: CE with full detect by FW. 7850 * @WMI_HOST_SMART_LOG_TX_RX_TIMEOUT: Tx/Rx timeout. 7851 * @WMI_HOST_SMART_LOG_STA_KICKOUT: STA Kickout. 7852 * @WMI_HOST_SMART_LOG_BCN_CMD_FAILURE: Beacon command failure. 7853 * @WMI_HOST_SMART_LOG_P1_PING_FAILURE: P1 ping failure. Ping failure detection 7854 * is done by host entities. So, host should be able to control the 7855 * enable/disable of this feature. Yet, this is provided in case the 7856 * corresponding FW specific debugs alone have to be enabled/disabled. 7857 * @WMI_HOST_SMART_LOG_CONNECTION_FAILURE: Connection failure. Connection 7858 * failure detection is done by host entities. So, host should be able to 7859 * control the enable/disable of this feature. Yet, this is provided in case the 7860 * corresponding FW specific debugs alone have to be enabled/disabled. 7861 * @WMI_HOST_SMART_LOG_FW_INITIATED_PKT_LOG: FW Initiated packetlog. 7862 * @WMI_HOST_SMART_LOG_EXTENSION_1: If WMI_HOST_SMART_LOG_EXTENSION_1 is set, 7863 * then the 'log_case_ext_1' field in 'wmi_smart_logging' is used; else 7864 * log_case_ext_1 is ignored. 7865 */ 7866 enum wmi_host_smart_log_scenario { 7867 WMI_HOST_SMART_LOG_ALL = 0x0, 7868 WMI_HOST_SMART_LOG_CE_FULL_DETECT_BY_FW = 0x1, 7869 WMI_HOST_SMART_LOG_TX_RX_TIMEOUT = 0x2, 7870 WMI_HOST_SMART_LOG_STA_KICKOUT = 0x4, 7871 WMI_HOST_SMART_LOG_BCN_CMD_FAILURE = 0x8, 7872 WMI_HOST_SMART_LOG_P1_PING_FAILURE = 0x10, 7873 WMI_HOST_SMART_LOG_CONNECTION_FAILURE = 0x20, 7874 WMI_HOST_SMART_LOG_FW_INITIATED_PKT_LOG = 0x40, 7875 7876 /* New scenarios to be added here */ 7877 7878 WMI_HOST_SMART_LOG_EXTENSION_1 = 0x80000000, 7879 }; 7880 7881 /** 7882 * struct wmi_fatal_condition_event - Fatal condition event param 7883 * @type: Type of event 7884 * @subtype: Subtype of event 7885 * @type_subtype_specific_data: Data specific to combination of type and 7886 * subtype. This is held in a union with the original "reserved0" for backward 7887 * compatibility with any code that might refer to it. The previously-reserved 7888 * field now holds data under some conditions. The kind of data depends on the 7889 * above "type" and "subtype" fields. The interpretation of the 7890 * type_subtype_specific_data field based on different type + subtype values is 7891 * shown below: 7892 * 1. type == WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG + subtype 7893 * == WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START -> 7894 * type_subtype_specific_data = WMI_HOST_PKTLOG_EVENT 7895 * For any type+subtype combinations not listed above, the recipient is expected 7896 * to ignore the type_subtype_specific_data field. 7897 */ 7898 struct wmi_fatal_condition_event { 7899 uint32_t type; 7900 uint32_t subtype; 7901 union { 7902 uint32_t reserved0; 7903 uint32_t type_subtype_specific_data; 7904 }; 7905 }; 7906 7907 /*Currently the Max fatal events is 3 */ 7908 #define FATAL_EVENTS_MAX 3 7909 7910 /** 7911 * struct wmi_debug_fatal_events: Fatal events list 7912 * @num_events:Number of events 7913 * @event[FATAL_EVENTS_MAX]: Each event data 7914 */ 7915 struct wmi_debug_fatal_events { 7916 uint32_t num_events; 7917 struct wmi_fatal_condition_event event[FATAL_EVENTS_MAX]; 7918 }; 7919 7920 /** 7921 * enum wmi_host_fatal_condition_type - Values that 'type' can take in 7922 * wmi_fatal_condition_event 7923 * @WMI_HOST_FATAL_CONDITION_EVENT_COMPLETION: Fatal condition event completion 7924 * @WMI_HOST_FATAL_CONDITION_CE_FAILURE: CE failure 7925 * @WMI_HOST_FATAL_CONDITION_TIMEOUTS: Communication timeouts 7926 * @WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE: Connection issue 7927 * @WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG: Configuration for FW initiated 7928 * packetlog 7929 */ 7930 enum wmi_host_fatal_condition_type { 7931 WMI_HOST_FATAL_CONDITION_EVENT_COMPLETION, 7932 WMI_HOST_FATAL_CONDITION_CE_FAILURE, 7933 WMI_HOST_FATAL_CONDITION_TIMEOUTS, 7934 WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE, 7935 WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG, 7936 }; 7937 7938 /** 7939 * enum wmi_host_fatal_condition_subtype_timeouts - Possible subtypes for 7940 * WMI_HOST_FATAL_CONDITION_TIMEOUTS 7941 * @WMI_HOST_FATAL_SUBTYPE_TX_TIMEOUT: Tx timeout 7942 * @WMI_HOST_FATAL_SUBTYPE_RX_TIMEOUT: Rx timeout 7943 */ 7944 enum wmi_host_fatal_condition_subtype_timeouts { 7945 WMI_HOST_FATAL_SUBTYPE_TX_TIMEOUT, 7946 WMI_HOST_FATAL_SUBTYPE_RX_TIMEOUT, 7947 }; 7948 7949 /** 7950 * enum wmi_host_fatal_condition_subtype_connection_issue - Possible subtypes 7951 * for WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE 7952 * @WMI_HOST_FATAL_SUBTYPE_STA_KICKOUT: STA Kickout 7953 * @WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_START_DEBUG: Start debugging for P1 7954 * ping failure 7955 * @WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_STOP_DEBUG: Stop debugging for P1 7956 * ping failure 7957 * @WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_START_DEBUG: Start debugging for 7958 * connection failure 7959 * @WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_STOP_DEBUG: Stop debugging for 7960 * connection failure 7961 */ 7962 enum wmi_host_fatal_condition_subtype_connection_issue { 7963 WMI_HOST_FATAL_SUBTYPE_STA_KICKOUT, 7964 WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_START_DEBUG, 7965 WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_STOP_DEBUG, 7966 WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_START_DEBUG, 7967 WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_STOP_DEBUG, 7968 }; 7969 7970 /** 7971 * enum wmi_host_fatal_condition_subtype_packet_log_config - Possible subtypes 7972 * for WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG 7973 * @WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START: Start FW initiated packetlog 7974 * @WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_STOP: Stop FW initiated packetlog 7975 */ 7976 enum wmi_host_fatal_condition_subtype_packet_log_config { 7977 WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START, 7978 WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_STOP, 7979 }; 7980 7981 #endif /* OL_ATH_SMART_LOGGING */ 7982 7983 #define GET_PN_MAX_LEN 16 7984 #define GET_RX_PN_MAX_LEN 8 7985 7986 /** 7987 * struct wmi_host_get_pn_event - PN event params 7988 * @vdev_id: vdev id 7989 * @peer_macaddr: Peer mac address 7990 * @key_type: key type 7991 * @pn : pn value 7992 */ 7993 struct wmi_host_get_pn_event { 7994 uint32_t vdev_id; 7995 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 7996 uint32_t key_type; 7997 uint8_t pn[GET_PN_MAX_LEN]; 7998 }; 7999 8000 /** 8001 * struct wmi_host_get_rxpn_event - Rx PN event params 8002 * @vdev_id: vdev id 8003 * @peer_macaddr: Peer mac address 8004 * @keyix: key index 8005 * @pn: pn value 8006 */ 8007 struct wmi_host_get_rxpn_event { 8008 uint32_t vdev_id; 8009 uint8_t mac_addr[QDF_MAC_ADDR_SIZE]; 8010 uint16_t keyix; 8011 uint8_t pn[GET_RX_PN_MAX_LEN]; 8012 }; 8013 8014 /** 8015 * struct wmi_init_cmd_param - INIT command params 8016 * @target_resource_config: pointer to resource config 8017 * @num_mem_chunks: number of memory chunks 8018 * @struct wmi_host_mem_chunk: pointer to memory chunks 8019 * @hw_mode_index: HW mode index chosen 8020 * @num_band_to_mac: Number of band to mac setting 8021 * @struct wmi_host_pdev_band_to_mac: band to mac setting 8022 */ 8023 struct wmi_init_cmd_param { 8024 target_resource_config *res_cfg; 8025 uint8_t num_mem_chunks; 8026 struct wmi_host_mem_chunk *mem_chunks; 8027 uint32_t hw_mode_id; 8028 uint32_t num_band_to_mac; 8029 struct wmi_host_pdev_band_to_mac band_to_mac[WMI_HOST_MAX_PDEV]; 8030 }; 8031 8032 /** 8033 * struct pdev_csa_switch_count_status - CSA switch count status event param 8034 * @pdev_id: Physical device identifier 8035 * @current_switch_count: Current CSA switch count 8036 * @num_vdevs: Number of vdevs that need restart 8037 * @vdev_ids: Array containing the vdev ids that need restart 8038 */ 8039 struct pdev_csa_switch_count_status { 8040 uint32_t pdev_id; 8041 uint32_t current_switch_count; 8042 uint32_t num_vdevs; 8043 uint32_t *vdev_ids; 8044 }; 8045 8046 /** 8047 * enum wmi_host_active-apf_mode - FW_ACTIVE_APF_MODE, replicated from FW header 8048 * @WMI_HOST_ACTIVE_APF_DISABLED: APF is disabled for all packets in active mode 8049 * @WMI_HOST_ACTIVE_APF_ENABLED: APF is enabled for all packets in active mode 8050 * @WMI_HOST_ACTIVE_APF_ADAPTIVE: APF is enabled for packets up to some 8051 * threshold in active mode 8052 */ 8053 enum wmi_host_active_apf_mode { 8054 WMI_HOST_ACTIVE_APF_DISABLED = (1 << 1), 8055 WMI_HOST_ACTIVE_APF_ENABLED = (1 << 2), 8056 WMI_HOST_ACTIVE_APF_ADAPTIVE = (1 << 3) 8057 }; 8058 8059 /** 8060 * struct coex_config_params - Coex config command params 8061 * @vdev_id: Virtual AP device identifier 8062 * @config_type: Configuration type - wmi_coex_config_type enum 8063 * @config_arg1: Configuration argument based on config type 8064 * @config_arg2: Configuration argument based on config type 8065 * @config_arg3: Configuration argument based on config type 8066 * @config_arg4: Configuration argument based on config type 8067 * @config_arg5: Configuration argument based on config type 8068 * @config_arg6: Configuration argument based on config type 8069 */ 8070 struct coex_config_params { 8071 uint32_t vdev_id; 8072 uint32_t config_type; 8073 uint32_t config_arg1; 8074 uint32_t config_arg2; 8075 uint32_t config_arg3; 8076 uint32_t config_arg4; 8077 uint32_t config_arg5; 8078 uint32_t config_arg6; 8079 }; 8080 8081 #define WMI_HOST_PDEV_ID_SOC 0xFF 8082 #define WMI_HOST_PDEV_ID_0 0 8083 #define WMI_HOST_PDEV_ID_1 1 8084 #define WMI_HOST_PDEV_ID_2 2 8085 #define WMI_HOST_PDEV_ID_INVALID 0xFFFFFFFF 8086 8087 /** 8088 * struct wmi_host_ready_ev_param - Data revieved in ready event 8089 * @status: FW init status. Success or Failure. 8090 * @num_dscp_table: Number of DSCP table supported in FW 8091 * @num_extra_mac_addr: Extra mac address present in ready event. Used 8092 * in DBDC mode to provide multiple mac per pdev. 8093 * @num_total_peer: Total number of peers FW could allocate. Zero means 8094 * FW could allocate num peers requested by host in init. 8095 * Otherwise, host need update it max_peer to this value. 8096 * @num_extra_peer: Number of extra peers created and used within FW. Host 8097 * should expect peer_id can be num_total_peer + num_extra_peer 8098 * but it can create only upto num_total_peer. 8099 * @agile_capability: Boolean specification of whether the target supports 8100 * agile DFS, by means of using one 80 MHz radio chain for 8101 * radar detection, concurrently with using another radio 8102 * chain for non-160 MHz regular operation. 8103 * @max_ast_index: Max number of AST entries that FW could allocate. 8104 * @pktlog_defs_checksum: checksum computed from the definitions of the enums 8105 * and structs used within pktlog traces. This is sent 8106 * from the FW as part of FW ready event and needs 8107 * to be embedded in the pktlog buffer header as version. 8108 * @num_max_active_vdevs: number of max active virtual devices (VAPs) to 8109 * support 8110 */ 8111 struct wmi_host_ready_ev_param { 8112 uint32_t status; 8113 uint32_t num_dscp_table; 8114 uint32_t num_extra_mac_addr; 8115 uint32_t num_total_peer; 8116 uint32_t num_extra_peer; 8117 bool agile_capability; 8118 uint32_t max_ast_index; 8119 uint32_t pktlog_defs_checksum; 8120 uint32_t num_max_active_vdevs; 8121 }; 8122 8123 enum bcn_offload_control_param { 8124 BCN_OFFLD_CTRL_TX_DISABLE = 0, 8125 BCN_OFFLD_CTRL_TX_ENABLE, 8126 BCN_OFFLD_CTRL_SWBA_DISABLE, 8127 BCN_OFFLD_CTRL_SWBA_ENABLE, 8128 }; 8129 8130 #ifdef OBSS_PD 8131 /** 8132 * struct wmi_host_obss_spatial_reuse_set_param - OBSS_PD_SPATIAL Reuse 8133 * structure 8134 * @enable: Enable/Disable Spatial Reuse 8135 * @obss_min: Minimum OBSS level to use 8136 * @obss_max: Maximum OBSS level to use 8137 * @pdev_id: Pdev id 8138 */ 8139 struct wmi_host_obss_spatial_reuse_set_param { 8140 uint32_t enable; 8141 int32_t obss_min; 8142 int32_t obss_max; 8143 uint32_t vdev_id; 8144 }; 8145 8146 /** 8147 * struct wmi_host_obss_spatial_reuse_set_def_thresh - default obsspd offsets 8148 * @obss_min: Minimum OBSS level to use 8149 * @obss_max: Maximum OBSS level to use 8150 * @vdev_type: vdev_type should be one of WMI_VDEV_TYPE_STA or WMI_VDEV_TYPE_AP 8151 */ 8152 struct wmi_host_obss_spatial_reuse_set_def_thresh { 8153 int32_t obss_min; 8154 int32_t obss_max; 8155 uint32_t vdev_type; 8156 }; 8157 #endif 8158 8159 /** 8160 * struct wmi_host_injector_frame_params - Injector frame configuration params 8161 * @vdev_id: vdev identifer of VAP 8162 * @enable: Enable/disable flag for the frame 8163 * @frame_type: Frame type to be enabled 8164 * @frame_inject_period: Periodicity of injector frame transmission in msecs 8165 * @frame_duration: Frame Duration field in usecs 8166 * @dstmac: Destination address to be used for the frame 8167 */ 8168 struct wmi_host_injector_frame_params { 8169 uint32_t vdev_id; 8170 uint32_t enable; 8171 uint32_t frame_type; 8172 uint32_t frame_inject_period; 8173 uint32_t frame_duration; 8174 uint8_t dstmac[QDF_MAC_ADDR_SIZE]; 8175 }; 8176 8177 /** 8178 * struct wds_entry - WDS entry structure 8179 * @peer_mac: peer mac 8180 * @wds_mac: wds mac address 8181 * @flags: flags 8182 */ 8183 struct wdsentry { 8184 u_int8_t peer_mac[QDF_MAC_ADDR_SIZE]; 8185 u_int8_t wds_mac[QDF_MAC_ADDR_SIZE]; 8186 uint32_t flags; 8187 }; 8188 8189 /** 8190 * struct wmi_obss_detection_cfg_param - obss detection cfg 8191 * @vdev_id: vdev id 8192 * @obss_detect_period_ms: detection period in ms 8193 * @obss_11b_ap_detect_mode: detect whether there is 11b ap/ibss 8194 * @obss_11b_sta_detect_mode: detect whether there is 11b sta 8195 * connected with other APs 8196 * @obss_11g_ap_detect_mode: detect whether there is 11g AP 8197 * @obss_11a_detect_mode: detect whether there is legacy 11a traffic 8198 * @obss_ht_legacy_detect_mode: detect whether there is ap which is 8199 * ht legacy mode 8200 * @obss_ht_mixed_detect_mode: detect whether there is ap which is ht mixed mode 8201 * @obss_ht_20mhz_detect_mode: detect whether there is ap which has 20M only 8202 * station 8203 */ 8204 struct wmi_obss_detection_cfg_param { 8205 uint32_t vdev_id; 8206 uint32_t obss_detect_period_ms; 8207 uint32_t obss_11b_ap_detect_mode; 8208 uint32_t obss_11b_sta_detect_mode; 8209 uint32_t obss_11g_ap_detect_mode; 8210 uint32_t obss_11a_detect_mode; 8211 uint32_t obss_ht_legacy_detect_mode; 8212 uint32_t obss_ht_mixed_detect_mode; 8213 uint32_t obss_ht_20mhz_detect_mode; 8214 }; 8215 8216 /** 8217 * enum wmi_obss_detection_reason - obss detection event reasons 8218 * @OBSS_OFFLOAD_DETECTION_DISABLED: OBSS detection disabled 8219 * @OBSS_OFFLOAD_DETECTION_PRESENT: OBSS present detection 8220 * @OBSS_OFFLOAD_DETECTION_ABSENT: OBSS absent detection 8221 * 8222 * Defines different types of reasons for obss detection event from firmware. 8223 */ 8224 enum wmi_obss_detection_reason { 8225 OBSS_OFFLOAD_DETECTION_DISABLED = 0, 8226 OBSS_OFFLOAD_DETECTION_PRESENT = 1, 8227 OBSS_OFFLOAD_DETECTION_ABSENT = 2, 8228 }; 8229 8230 /** 8231 * struct wmi_obss_detect_info - OBSS detection info from firmware 8232 * @vdev_id: ID of the vdev to which this info belongs. 8233 * @reason: Indicate if present or Absent detection, 8234 * also if not supported offload for this vdev. 8235 * @matched_detection_masks: Detection bit map. 8236 * @matched_bssid_addr: MAC address valid for only if info is present detection. 8237 */ 8238 struct wmi_obss_detect_info { 8239 uint32_t vdev_id; 8240 enum wmi_obss_detection_reason reason; 8241 uint32_t matched_detection_masks; 8242 uint8_t matched_bssid_addr[QDF_MAC_ADDR_SIZE]; 8243 }; 8244 8245 #ifdef QCA_SUPPORT_CP_STATS 8246 /** 8247 * struct wmi_host_congestion_stats - host definition of congestion stats 8248 * @vdev_id: ID of the vdev to which this info belongs. 8249 * @congestion: This field holds the congestion percentage = 8250 * (busy_time/total_time)*100 8251 * for the interval from when the vdev was started to the current time 8252 * (or the time at which the vdev was stopped). 8253 */ 8254 struct wmi_host_congestion_stats { 8255 uint32_t vdev_id; 8256 uint32_t congestion; 8257 }; 8258 #endif 8259 8260 #ifdef FEATURE_WLAN_APF 8261 /** 8262 * struct wmi_apf_write_memory_params - Android Packet Filter write memory 8263 * params 8264 * @vdev_id: VDEV on which APF memory is to be written 8265 * @apf_version: APF version number 8266 * @program_len: Length reserved for program in the APF work memory 8267 * @addr_offset: Relative address in APF work memory to start writing 8268 * @length: Size of the write 8269 * @buf: Pointer to the buffer 8270 */ 8271 struct wmi_apf_write_memory_params { 8272 uint8_t vdev_id; 8273 uint32_t apf_version; 8274 uint32_t program_len; 8275 uint32_t addr_offset; 8276 uint32_t length; 8277 uint8_t *buf; 8278 }; 8279 8280 /** 8281 * struct wmi_apf_read_memory_params - Android Packet Filter read memory params 8282 * @vdev_id: vdev id 8283 * @addr_offset: Relative address in APF work memory to read from 8284 * @length: Size of the memory fetch 8285 */ 8286 struct wmi_apf_read_memory_params { 8287 uint8_t vdev_id; 8288 uint32_t addr_offset; 8289 uint32_t length; 8290 }; 8291 8292 /** 8293 * struct wmi_apf_read_memory_resp_event_params - Event containing read Android 8294 * Packet Filter memory response 8295 * @vdev_id: vdev id 8296 * @offset: Read memory offset 8297 * @length: Read memory length 8298 * @more_data: Indicates more data to come 8299 * @data: Pointer to the data 8300 */ 8301 struct wmi_apf_read_memory_resp_event_params { 8302 uint32_t vdev_id; 8303 uint32_t offset; 8304 uint32_t length; 8305 bool more_data; 8306 uint8_t *data; 8307 }; 8308 #endif /* FEATURE_WLAN_APF */ 8309 8310 /* vdev control flags (per bits) */ 8311 #define WMI_HOST_VDEV_FLAGS_NON_MBSSID_AP 0x00000001 8312 #define WMI_HOST_VDEV_FLAGS_TRANSMIT_AP 0x00000002 8313 #define WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP 0x00000004 8314 8315 /* Begin of roam scan stats definitions */ 8316 8317 #define WMI_ROAM_SCAN_STATS_MAX 5 8318 #define WMI_ROAM_SCAN_STATS_CANDIDATES_MAX 4 8319 #define WMI_ROAM_SCAN_STATS_CHANNELS_MAX 50 8320 8321 /** 8322 * struct wmi_roam_scan_stats_req - Structure to hold roam scan stats request 8323 * @vdev_id: interface id 8324 */ 8325 struct wmi_roam_scan_stats_req { 8326 uint32_t vdev_id; 8327 }; 8328 8329 /** 8330 * struct wmi_roam_scan_cand - Roam scan candidates 8331 * @score: score of AP 8332 * @rssi: rssi of the AP 8333 * @freq: center frequency 8334 * @bssid: bssid of AP 8335 */ 8336 struct wmi_roam_scan_cand { 8337 uint32_t score; 8338 uint32_t rssi; 8339 uint32_t freq; 8340 uint8_t bssid[QDF_MAC_ADDR_SIZE]; 8341 }; 8342 8343 /** 8344 * struct wmi_roam_scan_stats_params - Roam scan details 8345 * @time_stamp: time at which this roam scan happened 8346 * @client_id: id of client which triggered this scan 8347 * @num_scan_chans: number of channels that were scanned as part of this scan 8348 * @scan_freqs: frequencies of the channels that were scanned 8349 * @is_roam_successful: whether a successful roaming happened after this scan 8350 * @old_bssid: bssid to which STA is connected just before this scan 8351 * @new_bssid: bssid to which STA is roamed to in case of successful roaming 8352 * @num_roam_candidates: no.of roam candidates that are being reported 8353 * @roam_candidate: roam scan candidate details 8354 * @trigger_id: reason for triggering this roam or roam scan 8355 * @trigger_value: threshold value related to trigger_id 8356 */ 8357 struct wmi_roam_scan_stats_params { 8358 uint64_t time_stamp; 8359 uint32_t client_id; 8360 uint32_t num_scan_chans; 8361 uint32_t scan_freqs[WMI_ROAM_SCAN_STATS_CHANNELS_MAX]; 8362 uint32_t is_roam_successful; 8363 8364 /* Bssid to which STA is connected when the roam scan is triggered */ 8365 uint8_t old_bssid[QDF_MAC_ADDR_SIZE]; 8366 8367 /* 8368 * Bssid to which STA is connected after roaming. Will be valid only 8369 * if is_roam_successful is true. 8370 */ 8371 uint8_t new_bssid[QDF_MAC_ADDR_SIZE]; 8372 8373 /* Number of roam candidates that are being reported in the stats */ 8374 uint32_t num_roam_candidates; 8375 struct wmi_roam_scan_cand cand[WMI_ROAM_SCAN_STATS_CANDIDATES_MAX]; 8376 uint32_t trigger_id; 8377 uint32_t trigger_value; 8378 }; 8379 8380 /** 8381 * struct wmi_roam_scan_stats_res - Roam scan stats response from firmware 8382 * @num_roam_scan: number of roam scans triggered 8383 * @roam_scan: place holder to indicate the array of 8384 * wmi_roam_scan_stats_params followed by this structure 8385 */ 8386 struct wmi_roam_scan_stats_res { 8387 uint32_t num_roam_scans; 8388 struct wmi_roam_scan_stats_params roam_scan[0]; 8389 }; 8390 8391 #define MAX_ROAM_CANDIDATE_AP 9 8392 #define MAX_ROAM_SCAN_CHAN 38 8393 #define MAX_ROAM_SCAN_STATS_TLV 5 8394 #define WLAN_MAX_BTM_CANDIDATE 8 8395 #define WLAN_ROAM_MAX_FRAME_INFO (MAX_ROAM_CANDIDATE_AP * 6) 8396 /** 8397 * struct btm_req_candidate_info - BTM request candidate 8398 * info 8399 * @candidate_bssid: Candidate bssid received in BTM request 8400 * @timestamp: candidate_timestamp; 8401 * @preference: candidate preference 8402 */ 8403 struct wmi_btm_req_candidate_info { 8404 struct qdf_mac_addr candidate_bssid; 8405 uint32_t timestamp; 8406 uint8_t preference; 8407 }; 8408 8409 /** 8410 * struct wmi_roam_btm_trigger_data - BTM roam trigger related information 8411 * @timestamp: timestamp 8412 * @btm_request_mode: BTM request mode - solicited/unsolicited 8413 * @disassoc_timer: Number of TBTT before AP disassociates the STA in ms 8414 * @validity_interval: Preferred candidate list validity interval in ms 8415 * @candidate_list_count: Number of candidates in BTM request. 8416 * @btm_resp_status: Status code of the BTM response. 8417 * @btm_bss_termination_timeout: BTM BSS termination timeout value 8418 * in milli seconds 8419 * @btm_mbo_assoc_retry_timeout: BTM MBO assoc retry timeout value in 8420 * milli seconds 8421 * @token: BTM request dialog token 8422 * @btm_cand: BTM request candidate information 8423 */ 8424 struct wmi_roam_btm_trigger_data { 8425 uint32_t timestamp; 8426 uint32_t btm_request_mode; 8427 uint32_t disassoc_timer; 8428 uint32_t validity_interval; 8429 uint32_t candidate_list_count; 8430 uint32_t btm_resp_status; 8431 uint32_t btm_bss_termination_timeout; 8432 uint32_t btm_mbo_assoc_retry_timeout; 8433 uint16_t token; 8434 struct wmi_btm_req_candidate_info btm_cand[WLAN_MAX_BTM_CANDIDATE]; 8435 }; 8436 8437 /** 8438 * struct wmi_roam_cu_trigger_data - BSS Load roam trigger parameters 8439 * @cu_load: Connected AP CU load percentage 8440 */ 8441 struct wmi_roam_cu_trigger_data { 8442 uint32_t cu_load; 8443 /* TODO: Add threshold value */ 8444 }; 8445 8446 /** 8447 * Struct wmi_roam_rssi_trigger_data - RSSI roam trigger related 8448 * parameters 8449 * @threshold: RSSI threshold value in dBm for LOW rssi roam trigger 8450 */ 8451 struct wmi_roam_rssi_trigger_data { 8452 uint32_t threshold; 8453 }; 8454 8455 /** 8456 * struct wmi_roam_deauth_trigger_data - Deauth roaming trigger related 8457 * parameters 8458 * @type: 1- Deauthentication 2- Disassociation 8459 * @reason: Status code of the Deauth/Disassoc received 8460 */ 8461 struct wmi_roam_deauth_trigger_data { 8462 uint32_t type; 8463 uint32_t reason; 8464 }; 8465 8466 /** 8467 * struct wmi_roam_wtc_btm_trigger_data - wtc btm roaming trigger related 8468 * parameters 8469 * @roaming_mode: Roaming Mode 8470 * @vsie_trigger_reason: Roam trigger reason present in btm request 8471 * @sub_code: Sub code present in btm request 8472 * @wtc_mode: WTC mode 8473 * @wtc_scan_mode: WTC scan mode 8474 * @wtc_rssi_th: Connected AP threshold 8475 * @wtc_candi_rssi_th: Candidate AP threshold 8476 * @wtc_candi_rssi_ext_present: Flag to notify that whether fw sends rssi 8477 * threshold for 5g & 6g AP to host or not 8478 * @wtc_candi_rssi_th_5g: 5g candidate AP rssi threshold 8479 * @wtc_candi_rssi_th_6g: 6g candidate AP rssi threshold 8480 * @duration: WTC duration 8481 */ 8482 struct wmi_roam_wtc_btm_trigger_data { 8483 uint32_t roaming_mode; 8484 uint32_t vsie_trigger_reason; 8485 uint32_t sub_code; 8486 uint32_t wtc_mode; 8487 uint32_t wtc_scan_mode; 8488 uint32_t wtc_rssi_th; 8489 uint32_t wtc_candi_rssi_th; 8490 uint32_t wtc_candi_rssi_ext_present; 8491 uint32_t wtc_candi_rssi_th_5g; 8492 uint32_t wtc_candi_rssi_th_6g; 8493 uint32_t duration; 8494 }; 8495 8496 /** 8497 * struct wmi_roam_candidate_info - Roam scan candidate APs related info 8498 * @timestamp: Host timestamp in millisecs 8499 * @type: 0 - Candidate AP; 1 - Current connected AP. 8500 * @bssid: AP bssid. 8501 * @freq: Channel frquency 8502 * @cu_load: Channel utilization load of the AP. 8503 * @cu_score: Channel Utilization score. 8504 * @rssi: Candidate AP rssi 8505 * @rssi_score: AP RSSI score 8506 * @total_score: Total score of the candidate AP. 8507 * @etp: Estimated throughput value of the AP in Mbps 8508 * @dl_reason: Denylist reason 8509 * @dl_source: Source of adding AP to DL 8510 * @dl_timestamp:This timestamp indicates the time when AP added 8511 * to denylist. 8512 * @dl_original_timeout: Original timeout value in milli seconds 8513 * when AP added to DL 8514 */ 8515 struct wmi_roam_candidate_info { 8516 uint32_t timestamp; 8517 uint8_t type; 8518 struct qdf_mac_addr bssid; 8519 uint16_t freq; 8520 uint32_t cu_load; 8521 uint32_t cu_score; 8522 uint32_t rssi; 8523 uint32_t rssi_score; 8524 uint32_t total_score; 8525 uint32_t etp; 8526 uint32_t dl_reason; 8527 uint32_t dl_source; 8528 uint32_t dl_timestamp; 8529 uint32_t dl_original_timeout; 8530 }; 8531 8532 /** 8533 * struct wmi_roam_scan_data - Roam scan event details 8534 * @present: Flag to check if the roam scan tlv is present 8535 * @is_btcoex_active: is bluetooth connection active 8536 * @type: 0 - Partial roam scan; 1 - Full roam scan 8537 * @num_ap: Number of candidate APs. 8538 * @num_chan: Number of channels. 8539 * @frame_info_count: Frame info TLV count 8540 * @next_rssi_threshold: Next roam can trigger rssi threshold 8541 * @chan_freq: List of frequencies scanned as part of roam scan 8542 * @ap: List of candidate AP info 8543 */ 8544 struct wmi_roam_scan_data { 8545 bool present; 8546 bool is_btcoex_active; 8547 uint16_t type; 8548 uint16_t num_ap; 8549 uint16_t num_chan; 8550 uint16_t frame_info_count; 8551 uint32_t next_rssi_threshold; 8552 uint16_t chan_freq[MAX_ROAM_SCAN_CHAN]; 8553 struct wmi_roam_candidate_info ap[MAX_ROAM_CANDIDATE_AP]; 8554 }; 8555 8556 /** 8557 * struct wmi_roam_result - Roam result related info. 8558 * @present: Flag to check if the roam result tlv is present 8559 * @timestamp: Host timestamp in millisecs 8560 * @status: 0 - Roaming is success ; 1 - Roaming failed ; 8561 * 2 - No roam 8562 * @fail_reason: One of WMI_ROAM_FAIL_REASON_ID 8563 * @fail_bssid: BSSID of the last attempted roam failed AP 8564 */ 8565 struct wmi_roam_result { 8566 bool present; 8567 uint32_t timestamp; 8568 uint32_t status; 8569 uint32_t fail_reason; 8570 struct qdf_mac_addr fail_bssid; 8571 }; 8572 8573 #define WLAN_11KV_TYPE_BTM_REQ 1 8574 #define WLAN_11KV_TYPE_NEIGHBOR_RPT 2 8575 8576 /** 8577 * struct wmi_neighbor_report_data - Neighbor report/BTM request related 8578 * data. 8579 * @present: Flag to check if the roam 11kv tlv is present 8580 * @timestamp: Host timestamp in millisecs 8581 * @req_type: 1 - BTM query ; 2 - 11K neighbor report request 8582 * @req_time: Request timestamp in ms 8583 * @resp_time: Response timestamp in ms 8584 * @num_freq: Number of frequencies 8585 * @freq: Channel frequency in Mhz 8586 * @btm_query_token: BTM query dialog token. 8587 * @btm_query_reason: BTM query reasons as defined in 8588 * IEEE802.11v spec table 7-43x 8589 */ 8590 struct wmi_neighbor_report_data { 8591 bool present; 8592 uint32_t timestamp; 8593 uint8_t req_type; 8594 uint32_t req_time; 8595 uint32_t resp_time; 8596 uint8_t num_freq; 8597 uint32_t freq[MAX_ROAM_SCAN_CHAN]; 8598 uint16_t btm_query_token; 8599 uint8_t btm_query_reason; 8600 }; 8601 8602 /** 8603 * struct wmi_roam_trigger_info() - Roam trigger related details 8604 * @present: Flag to check if the roam_trigger_info tlv is present 8605 * @trigger_reason: Roam trigger reason(enum WMI_ROAM_TRIGGER_REASON_ID) 8606 * @trigger_sub_reason: Sub reason for roam trigger if multiple roam scans 8607 * @current_rssi: Connected AP RSSI 8608 * @timestamp: Host timestamp in millisecs when roam scan was triggered 8609 * @btm_trig_data: BTM roam trigger parameters. 8610 * @cu_trig_data: BSS Load roam trigger parameters. 8611 * @rssi_trig_data: RSSI trigger related info. 8612 * @deauth_trig_data: Deauth roam trigger related info 8613 * @wtc_btm_trig_data: WTC BTM roam trigger related info 8614 */ 8615 struct wmi_roam_trigger_info { 8616 bool present; 8617 uint32_t trigger_reason; 8618 uint32_t trigger_sub_reason; 8619 uint32_t current_rssi; 8620 uint32_t timestamp; 8621 union { 8622 struct wmi_roam_btm_trigger_data btm_trig_data; 8623 struct wmi_roam_cu_trigger_data cu_trig_data; 8624 struct wmi_roam_rssi_trigger_data rssi_trig_data; 8625 struct wmi_roam_deauth_trigger_data deauth_trig_data; 8626 struct wmi_roam_wtc_btm_trigger_data wtc_btm_trig_data; 8627 }; 8628 }; 8629 8630 /* End of roam scan stats definitions */ 8631 8632 /** 8633 * enum wmi_obss_color_collision_evt_type - bss color collision event type 8634 * @OBSS_COLOR_COLLISION_DETECTION_DISABLE: OBSS color detection disabled 8635 * @OBSS_COLOR_COLLISION_DETECTION: OBSS color collision detection 8636 * @OBSS_COLOR_FREE_SLOT_TIMER_EXPIRY: OBSS free slot detection with 8637 * within expiry period 8638 * @OBSS_COLOR_FREE_SLOT_AVAILABLE: OBSS free slot detection 8639 * 8640 * Defines different types of type for obss color collision event type. 8641 */ 8642 enum wmi_obss_color_collision_evt_type { 8643 OBSS_COLOR_COLLISION_DETECTION_DISABLE = 0, 8644 OBSS_COLOR_COLLISION_DETECTION = 1, 8645 OBSS_COLOR_FREE_SLOT_TIMER_EXPIRY = 2, 8646 OBSS_COLOR_FREE_SLOT_AVAILABLE = 3, 8647 }; 8648 8649 /** 8650 * struct wmi_obss_color_collision_cfg_param - obss color collision cfg 8651 * @vdev_id: vdev id 8652 * @flags: proposed for future use cases, currently not used. 8653 * @evt_type: bss color collision event. 8654 * @current_bss_color: current bss color. 8655 * @detection_period_ms: scan interval for both AP and STA mode. 8656 * @scan_period_ms: scan period for passive scan to detect collision. 8657 * @free_slot_expiry_time_ms: FW to notify host at timer expiry after 8658 * which Host will disable the bss color. 8659 */ 8660 struct wmi_obss_color_collision_cfg_param { 8661 uint32_t vdev_id; 8662 uint32_t flags; 8663 enum wmi_obss_color_collision_evt_type evt_type; 8664 uint32_t current_bss_color; 8665 uint32_t detection_period_ms; 8666 uint32_t scan_period_ms; 8667 uint32_t free_slot_expiry_time_ms; 8668 }; 8669 8670 /** 8671 * struct wmi_obss_color_collision_info - bss color detection info from firmware 8672 * @vdev_id: ID of the vdev to which this info belongs. 8673 * @evt_type: bss color collision event. 8674 * @obss_color_bitmap_bit0to31: Bit set indicating BSS color present. 8675 * @obss_color_bitmap_bit32to63: Bit set indicating BSS color present. 8676 */ 8677 struct wmi_obss_color_collision_info { 8678 uint32_t vdev_id; 8679 enum wmi_obss_color_collision_evt_type evt_type; 8680 uint32_t obss_color_bitmap_bit0to31; 8681 uint32_t obss_color_bitmap_bit32to63; 8682 }; 8683 8684 #ifdef WMI_AP_SUPPORT 8685 /** 8686 * struct vap_pcp_tid_map_params - PCP tid map params 8687 * @vdev_id: vdev id 8688 * @pcp_to_tid_map: pointer to arry of pcp to tid map table 8689 */ 8690 struct vap_pcp_tid_map_params { 8691 uint32_t vdev_id; 8692 uint32_t *pcp_to_tid_map; 8693 }; 8694 8695 /** 8696 * struct vap_tidmap_prec_params - tidmap precedence params 8697 * @vdev_id: vdev id 8698 * @map_precedence: precedence of tid mapping 8699 */ 8700 struct vap_tidmap_prec_params { 8701 uint32_t vdev_id; 8702 uint32_t map_precedence; 8703 }; 8704 8705 #endif 8706 8707 /** 8708 * struct wmi_cfr_peer_tx_event_param - CFR peer tx_event params 8709 * @capture_method: CFR data capture method 8710 * @vdev_id: ID of vdev to which this info belongs 8711 * @mac_addr: Peer MAC address. In AP mode, it is the address of connected 8712 * peer for which CFR capture is needed. In STA mode, this is the 8713 * address of AP it is connected to. 8714 * @primary_20mhz_chan: Primary 20 MHz channel frequency in MHz 8715 * @bandwidth: BW of measurement 8716 * 0 - 20MHz, 1 - 40MHz, 2 - 80MHz, 3 - 160MHz, 4 - 80+80MHz 8717 * @phy_mode: Phy mode of channel, type - WMI_HOST_WLAN_PHY_MODE 8718 * @band_center_freq1: Center frequency 1 in MHz 8719 * @band_center_freq2: Center frequency 2 in MHz 8720 * @spatial_streams: Number of spatial streams 8721 * @correlation_info_1: Address of data from wmi_dma_buf_release_entry [31:0] 8722 * @correlation_info_2: 8723 * Bits [3:0] - Address of data from wmi_dma_buf_release_entry [35:32] 8724 * Bits [15:4] - Reserved 8725 * Bits [31:16] - Hardware PPDU ID [15:0] 8726 * @status: 8727 * Bits [1:0] - TX status, if any. 0-OK, 1-XRETRY, 2-DROP, 3-FILTERED. 8728 * Bits [30:2] - Reserved 8729 * Bit [31] - Status of the CFR capture of the peer 8730 * 1 - Successful, 0 - Unsuccessful. 8731 * @timestamp_us: Timestamp in microseconds at which the CFR was captured 8732 * in the hardware. The clock used for this timestamp is private 8733 * to the target and not visible to the host. So, Host can 8734 * interpret only the relative timestamp deltas from one message 8735 * to the next, but can't interpret the absolute timestamp 8736 * from a single message 8737 * @counter: Count of the current CFR capture from FW. 8738 * This is helpful to identify any drops in FW 8739 * @chain_rssi: Per chain RSSI of the peer, for upto WMI_HOST_MAX_CHAINS. 8740 * Each chain's entry reports the RSSI for different bandwidths. 8741 * Bits [7:0] - Primary 20 MHz 8742 * Bits [15:8] - Secondary 20 MHz of 40 MHz channel (if applicable) 8743 * Bits [23:16] - Secondary 40 MHz of 80 MHz channel (if applicable) 8744 * Bits [31:24] - Secondary 80 MHz of 160 MHz channel (if applicable) 8745 * Each of these 8-bit RSSI reports is in dBm units. 0x80 means invalid. 8746 * Unused bytes within used chain_rssi indices will be 0x80. 8747 * Unused rssi_chain indices will be set to 0x80808080. 8748 * @chain_phase: Per chain phase of peer for upto WMI_HOST_MAX_CHAINS. 8749 */ 8750 typedef struct { 8751 uint32_t capture_method; 8752 uint32_t vdev_id; 8753 struct qdf_mac_addr peer_mac_addr; 8754 uint32_t primary_20mhz_chan; 8755 uint32_t bandwidth; 8756 uint32_t phy_mode; 8757 uint32_t band_center_freq1; 8758 uint32_t band_center_freq2; 8759 uint32_t spatial_streams; 8760 uint32_t correlation_info_1; 8761 uint32_t correlation_info_2; 8762 uint32_t status; 8763 uint32_t timestamp_us; 8764 uint32_t counter; 8765 uint32_t chain_rssi[WMI_HOST_MAX_CHAINS]; 8766 uint16_t chain_phase[WMI_HOST_MAX_CHAINS]; 8767 int32_t cfo_measurement; 8768 uint8_t agc_gain[WMI_HOST_MAX_CHAINS]; 8769 uint32_t rx_start_ts; 8770 uint32_t rx_ts_reset; 8771 uint32_t mcs_rate; 8772 uint32_t gi_type; 8773 uint8_t agc_gain_tbl_index[WMI_HOST_MAX_CHAINS]; 8774 } wmi_cfr_peer_tx_event_param; 8775 8776 /** 8777 * struct wmi_cfr_phase_delta_param - AoA phase delta params 8778 * @pdev_id: pdev id 8779 * @freq: primary 20 MHz channel frequency in mhz 8780 * @max_chains: indicates max chains for which AoA will be reported 8781 * @chain_phase_mask: indicates the chains to which phase values are 8782 * reported by target 8783 * @phase_delta: phase delta associated with reported chain's each gain value 8784 * ibf_cal_val: IBF values to be added with phase delta of chains reported 8785 */ 8786 struct wmi_cfr_phase_delta_param { 8787 uint32_t pdev_id; 8788 uint32_t freq; 8789 uint32_t max_chains; 8790 uint32_t chain_phase_mask; 8791 uint32_t phase_delta[WMI_MAX_CHAINS_PHASE][WMI_MAX_AOA_PHASE_DELTA]; 8792 uint32_t ibf_cal_val[WMI_MAX_CHAINS_PHASE]; 8793 }; 8794 8795 /** 8796 * struct wmi_host_oem_indirect_data - Indirect OEM data 8797 * @pdev_id: pdev id 8798 * @len: length of data in bytes 8799 * @addr: 36 bit address 8800 */ 8801 struct wmi_host_oem_indirect_data { 8802 uint32_t pdev_id; 8803 uint32_t len; 8804 uint64_t addr; 8805 }; 8806 8807 /** 8808 * struct wmi_oem_response_param - OEM response info 8809 * @num_data1: First data response length 8810 * @num_data2: Second data response length 8811 * @data_1: First data 8812 * @data_2: Second data 8813 * @indirect_data: Indirect data 8814 */ 8815 struct wmi_oem_response_param { 8816 uint32_t num_data1; 8817 uint32_t num_data2; 8818 uint8_t *data_1; 8819 uint8_t *data_2; 8820 struct wmi_host_oem_indirect_data indirect_data; 8821 }; 8822 8823 /** 8824 * struct wifi_pos_11az_peer_delete_data - Wifi pos 11az ranging peer delete 8825 * data. This structure is used to copy the peer related info from PASN 8826 * events and pass it to wifi pos module 8827 * @vdev_id: vdev id 8828 * @num_peers: Total number of peers to be deleted 8829 * @peer_info: PASN peer entry details 8830 */ 8831 struct wifi_pos_pasn_peer_data { 8832 uint8_t vdev_id; 8833 uint8_t num_peers; 8834 struct wlan_pasn_request peer_info[WLAN_MAX_11AZ_PEERS]; 8835 }; 8836 8837 /** 8838 * struct mws_coex_state - Modem Wireless Subsystem(MWS) coex info 8839 * @vdev_id : vdev id 8840 * @coex_scheme_bitmap: LTE-WLAN coexistence scheme bitmap 8841 * Indicates the final schemes applied for the currrent Coex scenario. 8842 * Bit 0 - TDM policy 8843 * Bit 1 - Forced TDM policy 8844 * Bit 2 - Dynamic Power Back-off policy 8845 * Bit 3 - Channel Avoidance policy 8846 * Bit 4 - Static Power Back-off policy. 8847 * @active_conflict_count : active conflict count 8848 * @potential_conflict_count: Potential conflict count 8849 * @chavd_group0_bitmap : Indicates the WLAN channels to be avoided in 8850 * b/w WLAN CH-1 and WLAN CH-14 8851 * @chavd_group1_bitmap : Indicates the WLAN channels to be avoided in 8852 * WLAN CH-36 and WLAN CH-64 8853 * @chavd_group2_bitmap : Indicates the WLAN channels to be avoided in 8854 * b/w WLAN CH-100 and WLAN CH-140 8855 * @chavd_group2_bitmap : Indicates the WLAN channels to be avoided in 8856 * b/w WLAN CH-149 and WLAN CH-165 8857 */ 8858 struct mws_coex_state { 8859 uint32_t vdev_id; 8860 uint32_t coex_scheme_bitmap; 8861 uint32_t active_conflict_count; 8862 uint32_t potential_conflict_count; 8863 uint32_t chavd_group0_bitmap; 8864 uint32_t chavd_group1_bitmap; 8865 uint32_t chavd_group2_bitmap; 8866 uint32_t chavd_group3_bitmap; 8867 }; 8868 8869 /** 8870 * struct hdd_mws_coex_dpwb_state - Modem Wireless Subsystem(MWS) coex DPWB info 8871 * @vdev_id : vdev id 8872 * @current_dpwb_state: Current state of the Dynamic Power Back-off SM 8873 * @pnp1_value: Tx power to be applied in next Dynamic Power Back-off cycle 8874 * @lte_dutycycle: Indicates the duty cycle of current LTE frame 8875 * @sinr_wlan_on: LTE SINR value in dB, when WLAN is ON 8876 * @sinr_wlan_off: LTE SINR value in dB, when WLAN is OFF 8877 * @bler_count: LTE blocks with error for the current block err report. 8878 * @block_count: Number of LTE blocks considered for bler count report. 8879 * @wlan_rssi_level: WLAN RSSI level 8880 * @wlan_rssi: WLAN RSSI value in dBm considered in DP backoff algo 8881 * @is_tdm_running: Indicates whether any TDM policy triggered 8882 */ 8883 struct mws_coex_dpwb_state { 8884 uint32_t vdev_id; 8885 int32_t current_dpwb_state; 8886 int32_t pnp1_value; 8887 uint32_t lte_dutycycle; 8888 int32_t sinr_wlan_on; 8889 int32_t sinr_wlan_off; 8890 uint32_t bler_count; 8891 uint32_t block_count; 8892 uint32_t wlan_rssi_level; 8893 int32_t wlan_rssi; 8894 uint32_t is_tdm_running; 8895 }; 8896 8897 /** 8898 * struct mws_coex_tdm_state - Modem Wireless Subsystem(MWS) coex TDM state info 8899 * @vdev_id: vdev id 8900 * @tdm_policy_bitmap: Time Division Multiplexing (TDM) LTE-Coex Policy type. 8901 * @tdm_sf_bitmap: TDM LTE/WLAN sub-frame bitmap. 8902 */ 8903 struct mws_coex_tdm_state { 8904 uint32_t vdev_id; 8905 uint32_t tdm_policy_bitmap; 8906 uint32_t tdm_sf_bitmap; 8907 }; 8908 8909 /** 8910 * struct mws_coex_idrx_state - Modem Wireless Subsystem(MWS) coex IDRX state 8911 * @vdev_id: vdev id 8912 * @sub0_techid: SUB0 LTE-coex tech. 8913 * @sub0_policy: SUB0 mitigation policy. 8914 * @sub0_is_link_critical: Set if SUB0 is in link critical state. 8915 * @sub0_static_power: LTE SUB0 imposed static power applied 8916 * to WLAN due to LTE-WLAN coex. 8917 * @sub0_rssi: LTE SUB0 RSSI value in dBm. 8918 * @sub1_techid: SUB1 LTE-coex tech. 8919 * @sub1_policy: SUB1 mitigation policy. 8920 * @sub1_is_link_critical: Set if SUB1 is in link critical state. 8921 * @sub1_static_power: LTE SUB1 imposed static power applied 8922 * to WLAN due to LTE-WLAN coex. 8923 * @sub1_rssi: LTE SUB1 RSSI value in dBm. 8924 */ 8925 struct mws_coex_idrx_state { 8926 uint32_t vdev_id; 8927 uint32_t sub0_techid; 8928 uint32_t sub0_policy; 8929 uint32_t sub0_is_link_critical; 8930 int32_t sub0_static_power; 8931 int32_t sub0_rssi; 8932 uint32_t sub1_techid; 8933 uint32_t sub1_policy; 8934 uint32_t sub1_is_link_critical; 8935 int32_t sub1_static_power; 8936 int32_t sub1_rssi; 8937 }; 8938 8939 /** 8940 * struct mws_antenna_sharing_info - MWS Antenna sharing Info 8941 * @vdev_id: vdev id 8942 * @coex_flags: BDF values of Coex flags 8943 * @coex_config: BDF values of Coex Antenna sharing config 8944 * @tx_chain_mask: Tx Chain mask value 8945 * @rx_chain_mask: Rx Chain mask value 8946 * @rx_nss: Currently active Rx Spatial streams 8947 * @force_mrc: Forced MRC policy type 8948 * @rssi_type: RSSI value considered for MRC 8949 * @chain0_rssi: RSSI value measured at Chain-0 in dBm 8950 * @chain1_rssi: RSSI value measured at Chain-1 in dBm 8951 * @combined_rssi: RSSI value of two chains combined in dBm 8952 * @imbalance: Absolute imbalance between two Rx chains in dB 8953 * @mrc_threshold: RSSI threshold defined for the above imbalance value in dBm 8954 * @grant_duration: Antenna grant duration to WLAN, in milliseconds 8955 */ 8956 struct mws_antenna_sharing_info { 8957 uint32_t vdev_id; 8958 uint32_t coex_flags; 8959 uint32_t coex_config; 8960 uint32_t tx_chain_mask; 8961 uint32_t rx_chain_mask; 8962 uint32_t rx_nss; 8963 uint32_t force_mrc; 8964 uint32_t rssi_type; 8965 int32_t chain0_rssi; 8966 int32_t chain1_rssi; 8967 int32_t combined_rssi; 8968 uint32_t imbalance; 8969 int32_t mrc_threshold; 8970 uint32_t grant_duration; 8971 }; 8972 8973 #ifdef FEATURE_ANI_LEVEL_REQUEST 8974 /* Maximum number of freqs for which ANI level can be requested */ 8975 #define MAX_NUM_FREQS_FOR_ANI_LEVEL 20 8976 8977 /* A valid ANI level lies between 0 to 9 */ 8978 #define MAX_ANI_LEVEL 9 8979 8980 struct wmi_host_ani_level_event { 8981 uint32_t chan_freq; 8982 uint32_t ani_level; 8983 }; 8984 #endif /* FEATURE_ANI_LEVEL_REQUEST */ 8985 8986 #define WMI_HOST_TBTT_OFFSET_INVALID 0xffffffff 8987 #define MAX_SUPPORTED_NEIGHBORS 16 8988 8989 /* command type for WMI_PDEV_TBTT_OFFSET_SYNC_CMDID */ 8990 enum wmi_host_tbtt_offset_cmd_type { 8991 WMI_HOST_PDEV_GET_TBTT_OFFSET, 8992 WMI_HOST_PDEV_SET_TBTT_OFFSET, 8993 }; 8994 8995 /** 8996 * struct wmi_raw_event_buffer - fw event buffers 8997 * @evt_raw_buf: event raw buffer 8998 * @evt_processed_buf: event processed buffer 8999 */ 9000 struct wmi_raw_event_buffer { 9001 void *evt_raw_buf; 9002 void *evt_processed_buf; 9003 }; 9004 9005 /* dpd_status fron WMI_PDEV_GET_DPD_STATUS_EVENTID */ 9006 enum wmi_host_dpd_status { 9007 WMI_HOST_DPD_STATUS_FAIL = 0, 9008 WMI_HOST_DPD_STATUS_PASS = 1, 9009 WMI_HOST_DPD_STATUS_INVALID = 2, 9010 }; 9011 9012 /** 9013 * struct wmi_host_pdev_get_dpd_status_event 9014 * @pdev_id: pdev id 9015 * @dpd_status: dpd status from FW - FAIL/PASS/INVALID 9016 */ 9017 struct wmi_host_pdev_get_dpd_status_event { 9018 uint32_t pdev_id; 9019 enum wmi_host_dpd_status dpd_status; 9020 }; 9021 9022 struct wmi_host_pdev_get_halphy_cal_status_event { 9023 uint32_t pdev_id; 9024 uint32_t halphy_cal_adc_status:1, 9025 halphy_cal_bwfilter_status:1, 9026 halphy_cal_pdet_and_pal_status:1, 9027 halphy_cal_rxdco_status:1, 9028 halphy_cal_comb_txiq_rxiq_status:1, 9029 halphy_cal_ibf_status:1, 9030 halphy_cal_pa_droop_status:1, 9031 halphy_cal_dac_status:1, 9032 halphy_cal_ani_status:1, 9033 halphy_cal_noise_floor_status:1; 9034 }; 9035 9036 /** 9037 * enum wmi_host_set_halphy_cal_chan_sel - channel select values for 9038 * set halphy cal 9039 * @WMI_HOST_SET_HALPHY_CAL_HOME_CHANNEL: Home channel 9040 * @WMI_HOST_SET_HALPHY_CAL_SCAN_CHANNEL: Scan channel 9041 * @WMI_HOST_SET_HALPHY_CAL_BOTH_CHANNELS: Both (Home + Scan) channels 9042 */ 9043 9044 enum wmi_host_set_halphy_cal_chan_sel { 9045 WMI_HOST_SET_HALPHY_CAL_HOME_CHANNEL = 0, 9046 WMI_HOST_SET_HALPHY_CAL_SCAN_CHANNEL = 1, 9047 WMI_HOST_SET_HALPHY_CAL_BOTH_CHANNELS = 2, 9048 }; 9049 9050 /** 9051 * struct wmi_host_send_set_halphy_cal_info 9052 * @pdev_id: pdev id 9053 * @value: bmap value 9054 * @chan_Sel: channel for calibration - HOME/SCAN/BOTH 9055 */ 9056 struct wmi_host_send_set_halphy_cal_info { 9057 uint8_t pdev_id; 9058 uint32_t value; 9059 enum wmi_host_set_halphy_cal_chan_sel chan_sel; 9060 }; 9061 9062 /** 9063 * struct wmi_install_key_comp_event - params of install key complete event 9064 * @vdev_id: unique id identifying the VDEV, generated by the caller 9065 * @key_ix: key index 9066 * @key_flags: key flags 9067 * @status: Event status 9068 * @peer_macaddr: MAC address used for installing 9069 */ 9070 struct wmi_install_key_comp_event { 9071 uint32_t vdev_id; 9072 uint32_t key_ix; 9073 uint32_t key_flags; 9074 uint32_t status; 9075 uint8_t peer_macaddr[QDF_MAC_ADDR_SIZE]; 9076 }; 9077 9078 /** 9079 * wmi_host_set_halphy_cal_status - status values from 9080 * WMI_PDEV_SET_HALPHY_CAL_BMAP_EVENTID 9081 * @WMI_HOST_SET_HALPHY_CAL_STATUS_SUCCESS: set halphy cal success 9082 * @WMI_HOST_SET_HALPHY_CAL_STATUS_FAIL: set halphy cal failure 9083 */ 9084 enum wmi_host_set_halphy_cal_status { 9085 WMI_HOST_SET_HALPHY_CAL_STATUS_SUCCESS = 0, 9086 WMI_HOST_SET_HALPHY_CAL_STATUS_FAIL = 1, 9087 }; 9088 9089 /** 9090 * struct wmi_host_send_set_halphy_cal_event 9091 * @pdev_id: pdev id 9092 * @status: PASS/FAIL 9093 */ 9094 struct wmi_host_pdev_set_halphy_cal_event { 9095 uint32_t pdev_id; 9096 enum wmi_host_set_halphy_cal_status status; 9097 }; 9098 9099 #ifdef FEATURE_MEC_OFFLOAD 9100 /** 9101 * struct set_mec_timer_params - params MEC timer params 9102 * @pdev_id: unique id identifying the PDEV, generated by the caller 9103 * @vdev_id: unique id identifying the VDEV, generated by the caller 9104 * @mec_aging_timer_threshold: The Threshold for mec aging timer in ms 9105 * @enable: Enable/Disable the command 9106 */ 9107 struct set_mec_timer_params { 9108 uint32_t pdev_id; 9109 uint32_t vdev_id; 9110 uint32_t mec_aging_timer_threshold; 9111 }; 9112 #endif 9113 9114 #ifdef WLAN_FEATURE_DYNAMIC_MAC_ADDR_UPDATE 9115 /** 9116 * struct set_mac_addr_params - Set MAC address command parameter 9117 * @vdev_id: vdev id 9118 * @mac_addr: VDEV MAC address 9119 * @mmld_addr: MLD address of the vdev 9120 */ 9121 struct set_mac_addr_params { 9122 uint8_t vdev_id; 9123 struct qdf_mac_addr mac_addr; 9124 struct qdf_mac_addr mld_addr; 9125 }; 9126 #endif 9127 9128 #ifdef WLAN_FEATURE_SON 9129 /** 9130 * struct wmi_host_inst_rssi_stats_resp - inst rssi stats 9131 * @inst_rssi: instantaneous rssi above the noise floor in dB unit 9132 * @peer_macaddr: peer mac address 9133 * @vdev_id: vdev_id 9134 */ 9135 struct wmi_host_inst_rssi_stats_resp { 9136 uint32_t inst_rssi; 9137 struct qdf_mac_addr peer_macaddr; 9138 uint32_t vdev_id; 9139 }; 9140 #endif 9141 9142 /** 9143 * struct vdev_pn_mgmt_rxfilter_params - Send PN mgmt RxFilter command params 9144 * @vdev_id: vdev id 9145 * @pn_rxfilter: Rx Filter 9146 */ 9147 struct vdev_pn_mgmt_rxfilter_params { 9148 uint8_t vdev_id; 9149 uint32_t pn_rxfilter; 9150 }; 9151 9152 /** 9153 * struct wmi_host_sw_cal_ver - BDF and FTM cal version data 9154 * @bdf_cal_ver: SW cal version in BDF 9155 * @ftm_cal_ver: SW cal version in factory data 9156 * @status: status. 0 for success, non-zero if version is incorrect 9157 */ 9158 struct wmi_host_sw_cal_ver { 9159 uint32_t bdf_cal_ver; 9160 uint32_t ftm_cal_ver; 9161 uint32_t status; 9162 }; 9163 9164 #ifdef HEALTH_MON_SUPPORT 9165 /** 9166 * struct wmi_health_mon_params - Health mon params 9167 * @ring_buf_paddr_low: Ring buffer physical address LOW 9168 * @ring_buf_paddr_high: Ring buffer physical address HIGH 9169 * @initial_upload_period_ms: Health mon periodic time 9170 * @read_index: ring element read_index 9171 */ 9172 struct wmi_health_mon_params { 9173 uint32_t ring_buf_paddr_low; 9174 uint32_t ring_buf_paddr_high; 9175 uint32_t initial_upload_period_ms; 9176 uint32_t read_index; 9177 }; 9178 #endif /* HEALTH_MON_SUPPORT */ 9179 9180 #endif /* _WMI_UNIFIED_PARAM_H_ */ 9181