1 /* 2 * Copyright (c) 2016-2018 The Linux Foundation. All rights reserved. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for 5 * any purpose with or without fee is hereby granted, provided that the 6 * above copyright notice and this permission notice appear in all 7 * copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 10 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED 11 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE 12 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL 13 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 14 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 15 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 16 * PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 /* 20 * This file contains the API definitions for the Unified Wireless Module 21 * Interface (WMI). 22 */ 23 24 #ifndef _WMI_UNIFIED_PARAM_H_ 25 #define _WMI_UNIFIED_PARAM_H_ 26 27 #include <wlan_scan_public_structs.h> 28 #ifdef CONVERGED_TDLS_ENABLE 29 #include <wlan_tdls_public_structs.h> 30 #endif 31 32 #define MAC_MAX_KEY_LENGTH 32 33 #define MAC_PN_LENGTH 8 34 #define MAX_MAC_HEADER_LEN 32 35 #define MIN_MAC_HEADER_LEN 24 36 #define QOS_CONTROL_LEN 2 37 38 #define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ 39 #define WMI_MAC_MAX_SSID_LENGTH 32 40 #define WMI_SCAN_MAX_NUM_SSID 0x0A 41 #ifndef CONFIG_HL_SUPPORT 42 #define mgmt_tx_dl_frm_len 64 43 #else 44 #define mgmt_tx_dl_frm_len 1532 45 #endif 46 #define WMI_SMPS_MASK_LOWER_16BITS 0xFF 47 #define WMI_SMPS_MASK_UPPER_3BITS 0x7 48 #define WMI_SMPS_PARAM_VALUE_S 29 49 #define WMI_UNIT_TEST_MAX_NUM_ARGS 100 50 /* The size of the utc time in bytes. */ 51 #define WMI_SIZE_UTC_TIME (10) 52 /* The size of the utc time error in bytes. */ 53 #define WMI_SIZE_UTC_TIME_ERROR (5) 54 #define WMI_MCC_MIN_CHANNEL_QUOTA 20 55 #define WMI_MCC_MAX_CHANNEL_QUOTA 80 56 #define WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY 30 57 #define WMI_BEACON_TX_BUFFER_SIZE (512) 58 #define WMI_WIFI_SCANNING_MAC_OUI_LENGTH 3 59 #define WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 60 #define WMI_RSSI_THOLD_DEFAULT -300 61 #define WMI_NLO_FREQ_THRESH 1000 62 #define WMI_SEC_TO_MSEC(sec) (sec * 1000) 63 #define WMI_MSEC_TO_USEC(msec) (msec * 1000) 64 #define WMI_ETH_LEN 64 65 #define WMI_QOS_NUM_TSPEC_MAX 2 66 #define WMI_QOS_NUM_AC_MAX 4 67 #define WMI_IPV4_ADDR_LEN 4 68 #define WMI_KEEP_ALIVE_NULL_PKT 1 69 #define WMI_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 70 #define WMI_MAC_MAX_KEY_LENGTH 32 71 #define WMI_KRK_KEY_LEN 16 72 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 73 #define WMI_BTK_KEY_LEN 32 74 #define WMI_ROAM_R0KH_ID_MAX_LEN 48 75 #define WMI_ROAM_SCAN_PSK_SIZE 32 76 #endif 77 #define WMI_NOISE_FLOOR_DBM_DEFAULT (-96) 78 #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 79 #define WMI_ROAM_MAX_CHANNELS 80 80 #ifdef FEATURE_WLAN_EXTSCAN 81 #define WMI_MAX_EXTSCAN_MSG_SIZE 1536 82 #define WMI_EXTSCAN_REST_TIME 100 83 #define WMI_EXTSCAN_MAX_SCAN_TIME 50000 84 #define WMI_EXTSCAN_BURST_DURATION 150 85 #endif 86 #define WMI_SCAN_NPROBES_DEFAULT (2) 87 #define WMI_SEC_TO_MSEC(sec) (sec * 1000) /* sec to msec */ 88 #define WMI_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */ 89 #define WMI_NLO_FREQ_THRESH 1000 /* in MHz */ 90 91 #define WMI_SVC_MSG_MAX_SIZE 1536 92 #define MAX_UTF_EVENT_LENGTH 2048 93 #define MAX_WMI_UTF_LEN 252 94 #define MAX_WMI_QVIT_LEN 252 95 #define THERMAL_LEVELS 4 96 #define WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES 256 97 #define WMI_HOST_BCN_FLT_MAX_ELEMS_IE_LIST \ 98 (WMI_HOST_BCN_FLT_MAX_SUPPORTED_IES/32) 99 #define LTEU_MAX_BINS 10 100 #define ATF_ACTIVED_MAX_CLIENTS 50 101 #define ATF_ACTIVED_MAX_ATFGROUPS 8 102 #define CTL_5G_SIZE 1536 103 #define CTL_2G_SIZE 684 104 #define MAX_CTL_SIZE (CTL_5G_SIZE > CTL_2G_SIZE ? CTL_5G_SIZE : CTL_2G_SIZE) 105 #define IEEE80211_MICBUF_SIZE (8+8) 106 #define IEEE80211_TID_SIZE 17 107 #define WME_NUM_AC 4 108 #define SMART_ANT_MODE_SERIAL 0 109 #define SMART_ANT_MODE_PARALLEL 1 110 #define IEEE80211_WEP_NKID 4 /* number of key ids */ 111 #define WPI_IV_LEN 16 112 #define WMI_SCAN_MAX_NUM_BSSID 10 113 #define MAX_CHANS 1023 114 #define TARGET_OEM_CONFIGURE_LCI 0x0A 115 #define RTT_LCI_ALTITUDE_MASK 0x3FFFFFFF 116 #define TARGET_OEM_CONFIGURE_LCR 0x09 117 #define RTT_TIMEOUT_MS 180 118 #define MAX_SUPPORTED_RATES 128 119 #define WMI_HOST_MAX_BUFFER_SIZE 1712 120 #define WMI_HAL_MAX_SANTENNA 4 121 #define WMI_HOST_PDEV_VI_PRIORITY_BIT (1<<2) 122 #define WMI_HOST_PDEV_BEACON_PRIORITY_BIT (1<<4) 123 #define WMI_HOST_PDEV_MGMT_PRIORITY_BIT (1<<5) 124 #define WMI_MAX_CMDS 1024 125 126 #define FIPS_ALIGN 4 127 #define FIPS_ALIGNTO(__addr, __to) \ 128 ((((unsigned long int)(__addr)) + (__to) - 1) & ~((__to) - 1)) 129 #define FIPS_IS_ALIGNED(__addr, __to) \ 130 (!(((unsigned long int)(__addr)) & ((__to)-1))) 131 132 #define WMI_HOST_MAX_SERIAL_ANTENNA 2 133 #define WMI_SMART_ANT_MAX_RATE_SERIES 2 134 135 #define WMI_HOST_F_MS(_v, _f) \ 136 (((_v) & (_f)) >> (_f##_S)) 137 138 #define WMI_HOST_F_RMW(_var, _v, _f) \ 139 do { \ 140 (_var) &= ~(_f); \ 141 (_var) |= (((_v) << (_f##_S)) & (_f)); \ 142 } while (0) 143 144 /* vdev capabilities bit mask */ 145 #define WMI_HOST_VDEV_BEACON_SUPPORT 0x1 146 #define WMI_HOST_VDEV_WDS_LRN_ENABLED 0x2 147 #define WMI_HOST_VDEV_VOW_ENABLED 0x4 148 #define WMI_HOST_VDEV_IS_BEACON_SUPPORTED(param) \ 149 ((param) & WMI_HOST_VDEV_BEACON_SUPPORT) 150 #define WMI_HOST_VDEV_IS_WDS_LRN_ENABLED(param) \ 151 ((param) & WMI_HOST_VDEV_WDS_LRN_ENABLED) 152 #define WMI_HOST_VDEV_IS_VOW_ENABLED(param) \ 153 ((param) & WMI_HOST_VDEV_VOW_ENABLED) 154 155 /* TXBF capabilities masks */ 156 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_S 0 157 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_M 0x1 158 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE \ 159 (WMI_HOST_TXBF_CONF_SU_TX_BFEE_M << WMI_HOST_TXBF_CONF_SU_TX_BFEE_S) 160 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_GET(x) \ 161 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFEE) 162 #define WMI_HOST_TXBF_CONF_SU_TX_BFEE_SET(x, z) \ 163 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFEE) 164 165 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_S 1 166 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_M 0x1 167 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE \ 168 (WMI_HOST_TXBF_CONF_MU_TX_BFEE_M << WMI_HOST_TXBF_CONF_MU_TX_BFEE_S) 169 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_GET(x) \ 170 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFEE) 171 #define WMI_HOST_TXBF_CONF_MU_TX_BFEE_SET(x, z) \ 172 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFEE) 173 174 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_S 2 175 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_M 0x1 176 #define WMI_HOST_TXBF_CONF_SU_TX_BFER \ 177 (WMI_HOST_TXBF_CONF_SU_TX_BFER_M << WMI_HOST_TXBF_CONF_SU_TX_BFER_S) 178 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_GET(x) \ 179 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_SU_TX_BFER) 180 #define WMI_HOST_TXBF_CONF_SU_TX_BFER_SET(x, z) \ 181 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_SU_TX_BFER) 182 183 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_S 3 184 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_M 0x1 185 #define WMI_HOST_TXBF_CONF_MU_TX_BFER \ 186 (WMI_HOST_TXBF_CONF_MU_TX_BFER_M << WMI_HOST_TXBF_CONF_MU_TX_BFER_S) 187 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_GET(x) \ 188 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_MU_TX_BFER) 189 #define WMI_HOST_TXBF_CONF_MU_TX_BFER_SET(x, z) \ 190 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_MU_TX_BFER) 191 192 #define WMI_HOST_TXBF_CONF_STS_CAP_S 4 193 #define WMI_HOST_TXBF_CONF_STS_CAP_M 0x7 194 #define WMI_HOST_TXBF_CONF_STS_CAP \ 195 (WMI_HOST_TXBF_CONF_STS_CAP_M << WMI_HOST_TXBF_CONF_STS_CAP_S) 196 #define WMI_HOST_TXBF_CONF_STS_CAP_GET(x) \ 197 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_STS_CAP); 198 #define WMI_HOST_TXBF_CONF_STS_CAP_SET(x, z) \ 199 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_STS_CAP) 200 201 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_S 7 202 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_M 0x1 203 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF \ 204 (WMI_HOST_TXBF_CONF_IMPLICIT_BF_M << WMI_HOST_TXBF_CONF_IMPLICIT_BF_S) 205 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_GET(x) \ 206 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_IMPLICIT_BF) 207 #define WMI_HOST_TXBF_CONF_IMPLICIT_BF_SET(x, z) \ 208 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_IMPLICIT_BF) 209 210 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_S 8 211 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_M 0x7 212 #define WMI_HOST_TXBF_CONF_BF_SND_DIM \ 213 (WMI_HOST_TXBF_CONF_BF_SND_DIM_M << WMI_HOST_TXBF_CONF_BF_SND_DIM_S) 214 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_GET(x) \ 215 WMI_HOST_F_MS(x, WMI_HOST_TXBF_CONF_BF_SND_DIM) 216 #define WMI_HOST_TXBF_CONF_BF_SND_DIM_SET(x, z) \ 217 WMI_HOST_F_RMW(x, z, WMI_HOST_TXBF_CONF_BF_SND_DIM) 218 219 /* The following WMI_HOST_HEOPS_BSSCOLOR_XXX macros correspond to the 220 * WMI_HEOPS_COLOR_XXX macros in the FW wmi_unified.h */ 221 #define WMI_HOST_HEOPS_BSSCOLOR_S 0 222 #define WMI_HOST_HEOPS_BSSCOLOR_M 0x3f 223 #define WMI_HOST_HEOPS_BSSCOLOR \ 224 (WMI_HOST_HEOPS_BSSCOLOR_M << WMI_HOST_HEOPS_BSSCOLOR_S) 225 #define WMI_HOST_HEOPS_BSSCOLOR_GET(x) \ 226 WMI_HOST_F_MS(x, WMI_HOST_HEOPS_BSSCOLOR) 227 #define WMI_HOST_HEOPS_BSSCOLOR_SET(x, z) \ 228 WMI_HOST_F_RMW(x, z, WMI_HOST_HEOPS_BSSCOLOR) 229 230 /* The following WMI_HOST_HEOPS_BSSCOLOR_DISABLE_XXX macros correspond to the 231 * WMI_HEOPS_BSSCOLORDISABLE_XXX macros in the FW wmi_unified.h */ 232 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_S 30 233 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_M 0x1 234 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE \ 235 (WMI_HOST_HEOPS_BSSCOLOR_DISABLE_M << WMI_HOST_HEOPS_BSSCOLOR_DISABLE_S) 236 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_GET(x) \ 237 WMI_HOST_F_MS(x, WMI_HOST_HEOPS_BSSCOLOR_DISABLE) 238 #define WMI_HOST_HEOPS_BSSCOLOR_DISABLE_SET(x, z) \ 239 WMI_HOST_F_RMW(x, z, WMI_HOST_HEOPS_BSSCOLOR_DISABLE) 240 241 /* HE BF capabilities mask */ 242 #define WMI_HOST_HE_BF_CONF_SU_BFEE_S 0 243 #define WMI_HOST_HE_BF_CONF_SU_BFEE_M 0x1 244 #define WMI_HOST_HE_BF_CONF_SU_BFEE \ 245 (WMI_HOST_HE_BF_CONF_SU_BFEE_M << WMI_HOST_HE_BF_CONF_SU_BFEE_S) 246 #define WMI_HOST_HE_BF_CONF_SU_BFEE_GET(x) \ 247 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFEE) 248 #define WMI_HOST_HE_BF_CONF_SU_BFEE_SET(x, z) \ 249 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFEE) 250 251 #define WMI_HOST_HE_BF_CONF_SU_BFER_S 1 252 #define WMI_HOST_HE_BF_CONF_SU_BFER_M 0x1 253 #define WMI_HOST_HE_BF_CONF_SU_BFER \ 254 (WMI_HOST_HE_BF_CONF_SU_BFER_M << WMI_HOST_HE_BF_CONF_SU_BFER_S) 255 #define WMI_HOST_HE_BF_CONF_SU_BFER_GET(x) \ 256 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_SU_BFER) 257 #define WMI_HOST_HE_BF_CONF_SU_BFER_SET(x, z) \ 258 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_SU_BFER) 259 260 #define WMI_HOST_HE_BF_CONF_MU_BFEE_S 2 261 #define WMI_HOST_HE_BF_CONF_MU_BFEE_M 0x1 262 #define WMI_HOST_HE_BF_CONF_MU_BFEE \ 263 (WMI_HOST_HE_BF_CONF_MU_BFEE_M << WMI_HOST_HE_BF_CONF_MU_BFEE_S) 264 #define WMI_HOST_HE_BF_CONF_MU_BFEE_GET(x) \ 265 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFEE) 266 #define WMI_HOST_HE_BF_CONF_MU_BFEE_SET(x, z) \ 267 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFEE) 268 269 #define WMI_HOST_HE_BF_CONF_MU_BFER_S 3 270 #define WMI_HOST_HE_BF_CONF_MU_BFER_M 0x1 271 #define WMI_HOST_HE_BF_CONF_MU_BFER \ 272 (WMI_HOST_HE_BF_CONF_MU_BFER_M << WMI_HOST_HE_BF_CONF_MU_BFER_S) 273 #define WMI_HOST_HE_BF_CONF_MU_BFER_GET(x) \ 274 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_MU_BFER) 275 #define WMI_HOST_HE_BF_CONF_MU_BFER_SET(x, z) \ 276 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_MU_BFER) 277 278 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_S 4 279 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_M 0x1 280 #define WMI_HOST_HE_BF_CONF_DL_OFDMA \ 281 (WMI_HOST_HE_BF_CONF_DL_OFDMA_M << WMI_HOST_HE_BF_CONF_DL_OFDMA_S) 282 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_GET(x) \ 283 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_DL_OFDMA) 284 #define WMI_HOST_HE_BF_CONF_DL_OFDMA_SET(x, z) \ 285 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_DL_OFDMA) 286 287 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_S 5 288 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_M 0x1 289 #define WMI_HOST_HE_BF_CONF_UL_OFDMA \ 290 (WMI_HOST_HE_BF_CONF_UL_OFDMA_M << WMI_HOST_HE_BF_CONF_UL_OFDMA_S) 291 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_GET(x) \ 292 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_OFDMA) 293 #define WMI_HOST_HE_BF_CONF_UL_OFDMA_SET(x, z) \ 294 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_OFDMA) 295 296 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_S 6 297 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_M 0x1 298 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO \ 299 (WMI_HOST_HE_BF_CONF_UL_MUMIMO_M << WMI_HOST_HE_BF_CONF_UL_MUMIMO_S) 300 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_GET(x) \ 301 WMI_HOST_F_MS(x, WMI_HOST_HE_BF_CONF_UL_MUMIMO) 302 #define WMI_HOST_HE_BF_CONF_UL_MUMIMO_SET(x, z) \ 303 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_BF_CONF_UL_MUMIMO) 304 305 /* HE or VHT Sounding */ 306 #define WMI_HOST_HE_VHT_SOUNDING_MODE_S 0 307 #define WMI_HOST_HE_VHT_SOUNDING_MODE_M 0x1 308 #define WMI_HOST_HE_VHT_SOUNDING_MODE \ 309 (WMI_HOST_HE_VHT_SOUNDING_MODE_M << WMI_HOST_HE_VHT_SOUNDING_MODE_S) 310 #define WMI_HOST_HE_VHT_SOUNDING_MODE_GET(x) \ 311 WMI_HOST_F_MS(x, WMI_HOST_HE_VHT_SOUNDING_MODE) 312 #define WMI_HOST_HE_VHT_SOUNDING_MODE_SET(x, z) \ 313 WMI_HOST_F_RMW(x, z, WMI_HOST_HE_VHT_SOUNDING_MODE) 314 315 /* SU or MU Sounding */ 316 #define WMI_HOST_SU_MU_SOUNDING_MODE_S 2 317 #define WMI_HOST_SU_MU_SOUNDING_MODE_M 0x1 318 #define WMI_HOST_SU_MU_SOUNDING_MODE \ 319 (WMI_HOST_SU_MU_SOUNDING_MODE_M << \ 320 WMI_HOST_SU_MU_SOUNDING_MODE_S) 321 #define WMI_HOST_SU_MU_SOUNDING_MODE_GET(x) \ 322 WMI_HOST_F_MS(x, WMI_HOST_SU_MU_SOUNDING_MODE) 323 #define WMI_HOST_SU_MU_SOUNDING_MODE_SET(x, z) \ 324 WMI_HOST_F_RMW(x, z, WMI_HOST_SU_MU_SOUNDING_MODE) 325 326 /* Trig or Non-Trig Sounding */ 327 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_S 3 328 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_M 0x1 329 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE \ 330 (WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_M << \ 331 WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_S) 332 #define WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE_GET(x) \ 333 WMI_HOST_F_MS(x, WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE) 334 #define WMI_HOST_HE_VHT_SU_MU_SOUNDING_MODE_SET(x, z) \ 335 WMI_HOST_F_RMW(x, z, WMI_HOST_TRIG_NONTRIG_SOUNDING_MODE) 336 337 #define WMI_HOST_TPC_RATE_MAX 160 338 #define WMI_HOST_TPC_TX_NUM_CHAIN 4 339 #define WMI_HOST_RXG_CAL_CHAN_MAX 8 340 #define WMI_HOST_MAX_NUM_CHAINS 8 341 #define WMI_MAX_NUM_OF_RATE_THRESH 4 342 343 #define WMI_HOST_PDEV_MAX_VDEVS 17 344 345 /* for QC98XX only */ 346 /*6 modes (A, HT20, HT40, VHT20, VHT40, VHT80) * 3 reg dommains 347 */ 348 #define WMI_HOST_NUM_CTLS_5G 18 349 /*6 modes (B, G, HT20, HT40, VHT20, VHT40) * 3 reg domains */ 350 #define WMI_HOST_NUM_CTLS_2G 18 351 #define WMI_HOST_NUM_BAND_EDGES_5G 8 352 #define WMI_HOST_NUM_BAND_EDGES_2G 4 353 354 /*Beelinier 5G*/ 355 #define WMI_HOST_NUM_CTLS_5G_11A 9 356 #define WMI_HOST_NUM_BAND_EDGES_5G_11A 25 357 #define WMI_HOST_NUM_CTLS_5G_HT20 24 358 #define WMI_HOST_NUM_BAND_EDGES_5G_HT20 25 359 #define WMI_HOST_NUM_CTLS_5G_HT40 18 360 #define WMI_HOST_NUM_BAND_EDGES_5G_HT40 12 361 #define WMI_HOST_NUM_CTLS_5G_HT80 18 362 #define WMI_HOST_NUM_BAND_EDGES_5G_HT80 6 363 #define WMI_HOST_NUM_CTLS_5G_HT160 9 364 #define WMI_HOST_NUM_BAND_EDGES_5G_HT160 2 365 366 /* Beeliner 2G */ 367 #define WMI_HOST_NUM_CTLS_2G_11B 6 368 #define WMI_HOST_NUM_BAND_EDGES_2G_11B 9 369 #define WMI_HOST_NUM_CTLS_2G_20MHZ 30 370 #define WMI_HOST_NUM_BAND_EDGES_2G_20MHZ 11 371 #define WMI_HOST_NUM_CTLS_2G_40MHZ 18 372 #define WMI_HOST_NUM_BAND_EDGES_2G_40MHZ 6 373 374 /* for QC98XX only */ 375 #define WMI_HOST_TX_NUM_CHAIN 0x3 376 #define WMI_HOST_TPC_REGINDEX_MAX 4 377 #define WMI_HOST_ARRAY_GAIN_NUM_STREAMS 2 378 379 #include "qdf_atomic.h" 380 381 #ifdef BIG_ENDIAN_HOST 382 /* This API is used in copying in elements to WMI message, 383 since WMI message uses multilpes of 4 bytes, This API 384 converts length into multiples of 4 bytes, and performs copy 385 */ 386 #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) do { \ 387 int j; \ 388 u_int32_t *src, *dest; \ 389 src = (u_int32_t *)srcp; \ 390 dest = (u_int32_t *)destp; \ 391 for (j = 0; j < roundup(len, sizeof(u_int32_t))/4; j++) { \ 392 *(dest+j) = qdf_le32_to_cpu(*(src+j)); \ 393 } \ 394 } while (0) 395 #else 396 397 #define WMI_HOST_IF_MSG_COPY_CHAR_ARRAY(destp, srcp, len) OS_MEMCPY(destp,\ 398 srcp, len) 399 400 #endif 401 402 /** macro to convert MAC address from WMI word format to char array */ 403 #define WMI_HOST_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ 404 (c_macaddr)[0] = ((pwmi_mac_addr)->mac_addr31to0) & 0xff; \ 405 (c_macaddr)[1] = (((pwmi_mac_addr)->mac_addr31to0) >> 8) & 0xff; \ 406 (c_macaddr)[2] = (((pwmi_mac_addr)->mac_addr31to0) >> 16) & 0xff; \ 407 (c_macaddr)[3] = (((pwmi_mac_addr)->mac_addr31to0) >> 24) & 0xff; \ 408 (c_macaddr)[4] = ((pwmi_mac_addr)->mac_addr47to32) & 0xff; \ 409 (c_macaddr)[5] = (((pwmi_mac_addr)->mac_addr47to32) >> 8) & 0xff; \ 410 } while (0) 411 412 #define TARGET_INIT_STATUS_SUCCESS 0x0 413 #define TARGET_INIT_STATUS_GEN_FAILED 0x1 414 #define TARGET_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) 415 #define TARGET_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) 416 417 #define MAX_ASSOC_IE_LENGTH 1024 418 typedef uint32_t TARGET_INIT_STATUS; 419 420 /** 421 * @brief Opaque handle of wmi structure 422 */ 423 struct wmi_unified; 424 typedef struct wmi_unified *wmi_unified_t; 425 426 typedef void *ol_scn_t; 427 /** 428 * @wmi_event_handler function prototype 429 */ 430 typedef int (*wmi_unified_event_handler)(ol_scn_t scn_handle, 431 uint8_t *event_buf, uint32_t len); 432 433 /** 434 * @WMI_HOST_WLAN_PHY_MODE: Host based enum ID for corresponding in 435 * WLAN_PHY_MODE. This should be consistent with WLAN_PHY_MODE always to avoid 436 * breaking the WMI 437 */ 438 typedef enum { 439 WMI_HOST_MODE_11A = 0, /* 11a Mode */ 440 WMI_HOST_MODE_11G = 1, /* 11b/g Mode */ 441 WMI_HOST_MODE_11B = 2, /* 11b Mode */ 442 WMI_HOST_MODE_11GONLY = 3, /* 11g only Mode */ 443 WMI_HOST_MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 444 WMI_HOST_MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 445 WMI_HOST_MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 446 WMI_HOST_MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 447 WMI_HOST_MODE_11AC_VHT20 = 8, 448 WMI_HOST_MODE_11AC_VHT40 = 9, 449 WMI_HOST_MODE_11AC_VHT80 = 10, 450 WMI_HOST_MODE_11AC_VHT20_2G = 11, 451 WMI_HOST_MODE_11AC_VHT40_2G = 12, 452 WMI_HOST_MODE_11AC_VHT80_2G = 13, 453 WMI_HOST_MODE_11AC_VHT80_80 = 14, 454 WMI_HOST_MODE_11AC_VHT160 = 15, 455 WMI_HOST_MODE_11AX_HE20 = 16, 456 WMI_HOST_MODE_11AX_HE40 = 17, 457 WMI_HOST_MODE_11AX_HE80 = 18, 458 WMI_HOST_MODE_11AX_HE80_80 = 19, 459 WMI_HOST_MODE_11AX_HE160 = 20, 460 WMI_HOST_MODE_11AX_HE20_2G = 21, 461 WMI_HOST_MODE_11AX_HE40_2G = 22, 462 WMI_HOST_MODE_11AX_HE80_2G = 23, 463 WMI_HOST_MODE_UNKNOWN = 24, 464 WMI_HOST_MODE_MAX = 24 465 } WMI_HOST_WLAN_PHY_MODE; 466 467 typedef enum { 468 WMI_HOST_VDEV_START_OK = 0, 469 WMI_HOST_VDEV_START_CHAN_INVALID, 470 WMI_HOST_VDEV_START_CHAN_BLOCKED, 471 } WMI_HOST_VDEV_START_STATUS; 472 473 /* 474 * Needs to be removed and use channel_param based 475 * on how it is processed 476 */ 477 typedef struct { 478 /** primary 20 MHz channel frequency in mhz */ 479 uint32_t mhz; 480 /** Center frequency 1 in MHz*/ 481 uint32_t band_center_freq1; 482 /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ 483 uint32_t band_center_freq2; 484 /** channel info described below */ 485 uint32_t info; 486 /** contains min power, max power, reg power and reg class id. */ 487 uint32_t reg_info_1; 488 /** contains antennamax */ 489 uint32_t reg_info_2; 490 } wmi_host_channel; 491 492 /** 493 * enum WMI_HOST_REGDMN_MODE: 494 * @WMI_HOST_REGDMN_MODE_11A: 11a channels 495 * @WMI_HOST_REGDMN_MODE_TURBO: 11a turbo-only channels 496 * @WMI_HOST_REGDMN_MODE_11B: 11b channels 497 * @WMI_HOST_REGDMN_MODE_PUREG: 11g channels (OFDM only) 498 * @WMI_HOST_REGDMN_MODE_11G: historical 499 * @WMI_HOST_REGDMN_MODE_108G: 11g+Turbo channels 500 * @WMI_HOST_REGDMN_MODE_108A: 11a+Turbo channels 501 * @WMI_HOST_REGDMN_MODE_XR: XR channels 502 * @WMI_HOST_REGDMN_MODE_11A_HALF_RATE: 11a half rate channels 503 * @WMI_HOST_REGDMN_MODE_11A_QUARTER_RATE: 11a quarter rate channels 504 * @WMI_HOST_REGDMN_MODE_11NG_HT20: 11ng HT20 channels 505 * @WMI_HOST_REGDMN_MODE_11NA_HT20: 11na HT20 channels 506 * @WMI_HOST_REGDMN_MODE_11NG_HT40PLUS: 11ng HT40+ channels 507 * @WMI_HOST_REGDMN_MODE_11NG_HT40MINUS: 11ng HT40- channels 508 * @WMI_HOST_REGDMN_MODE_11NA_HT40PLUS: 11na HT40+ channels 509 * @WMI_HOST_REGDMN_MODE_11NA_HT40MINUS: 11na HT40- channels 510 * @WMI_HOST_REGDMN_MODE_11AC_VHT20: 5GHz, VHT20 511 * @WMI_HOST_REGDMN_MODE_11AC_VHT40PLUS: 5GHz, VHT40+ channels 512 * @WMI_HOST_REGDMN_MODE_11AC_VHT40MINUS: 5GHz, VHT40- channels 513 * @WMI_HOST_REGDMN_MODE_11AC_VHT80: 5GHz, VHT80 channels 514 * @WMI_HOST_REGDMN_MODE_11AC_VHT160: 5GHz, VHT160 channels 515 * @WMI_HOST_REGDMN_MODE_11AC_VHT80_80: 5GHz, VHT80+80 channels 516 * @WMI_HOST_REGDMN_MODE_11AXG_HE20: 11ax 2.4GHz, HE20 channels 517 * @WMI_HOST_REGDMN_MODE_11AXA_HE20: 11ax 5GHz, HE20 channels 518 * @WMI_HOST_REGDMN_MODE_11AXG_HE40PLUS: 11ax 2.4GHz, HE40+ channels 519 * @WMI_HOST_REGDMN_MODE_11AXG_HE40MINUS: 11ax 2.4GHz, HE40- channels 520 * @WMI_HOST_REGDMN_MODE_11AXA_HE40PLUS: 11ax 5GHz, HE40+ channels 521 * @WMI_HOST_REGDMN_MODE_11AXA_HE40MINUS: 11ax 5GHz, HE40- channels 522 * @WMI_HOST_REGDMN_MODE_11AXA_HE80: 11ax 5GHz, HE80 channels 523 * @WMI_HOST_REGDMN_MODE_11AXA_HE160: 11ax 5GHz, HE160 channels 524 * @WMI_HOST_REGDMN_MODE_11AXA_HE80_80: 11ax 5GHz, HE80+80 channels 525 */ 526 typedef enum { 527 WMI_HOST_REGDMN_MODE_11A = 0x00000001, 528 WMI_HOST_REGDMN_MODE_TURBO = 0x00000002, 529 WMI_HOST_REGDMN_MODE_11B = 0x00000004, 530 WMI_HOST_REGDMN_MODE_PUREG = 0x00000008, 531 WMI_HOST_REGDMN_MODE_11G = 0x00000008, 532 WMI_HOST_REGDMN_MODE_108G = 0x00000020, 533 WMI_HOST_REGDMN_MODE_108A = 0x00000040, 534 WMI_HOST_REGDMN_MODE_XR = 0x00000100, 535 WMI_HOST_REGDMN_MODE_11A_HALF_RATE = 0x00000200, 536 WMI_HOST_REGDMN_MODE_11A_QUARTER_RATE = 0x00000400, 537 WMI_HOST_REGDMN_MODE_11NG_HT20 = 0x00000800, 538 WMI_HOST_REGDMN_MODE_11NA_HT20 = 0x00001000, 539 WMI_HOST_REGDMN_MODE_11NG_HT40PLUS = 0x00002000, 540 WMI_HOST_REGDMN_MODE_11NG_HT40MINUS = 0x00004000, 541 WMI_HOST_REGDMN_MODE_11NA_HT40PLUS = 0x00008000, 542 WMI_HOST_REGDMN_MODE_11NA_HT40MINUS = 0x00010000, 543 WMI_HOST_REGDMN_MODE_11AC_VHT20 = 0x00020000, 544 WMI_HOST_REGDMN_MODE_11AC_VHT40PLUS = 0x00040000, 545 WMI_HOST_REGDMN_MODE_11AC_VHT40MINUS = 0x00080000, 546 WMI_HOST_REGDMN_MODE_11AC_VHT80 = 0x00100000, 547 WMI_HOST_REGDMN_MODE_11AC_VHT160 = 0x00200000, 548 WMI_HOST_REGDMN_MODE_11AC_VHT80_80 = 0x00400000, 549 WMI_HOST_REGDMN_MODE_11AXG_HE20 = 0x00800000, 550 WMI_HOST_REGDMN_MODE_11AXA_HE20 = 0x01000000, 551 WMI_HOST_REGDMN_MODE_11AXG_HE40PLUS = 0x02000000, 552 WMI_HOST_REGDMN_MODE_11AXG_HE40MINUS = 0x04000000, 553 WMI_HOST_REGDMN_MODE_11AXA_HE40PLUS = 0x08000000, 554 WMI_HOST_REGDMN_MODE_11AXA_HE40MINUS = 0x10000000, 555 WMI_HOST_REGDMN_MODE_11AXA_HE80 = 0x20000000, 556 WMI_HOST_REGDMN_MODE_11AXA_HE160 = 0x40000000, 557 WMI_HOST_REGDMN_MODE_11AXA_HE80_80 = 0x80000000, 558 WMI_HOST_REGDMN_MODE_ALL = 0xffffffff 559 } WMI_HOST_REGDMN_MODE; 560 561 /** 562 * enum WMI_HOST_WLAN_BAND_CAPABILITY: Band capability (2.4 GHz, 5 GHz). Maps to 563 * WLAN_BAND_CAPABILITY used in firmware header file(s). 564 * @WMI_HOST_WLAN_2G_CAPABILITY: 2.4 GHz capable 565 * @WMI_HOST_WLAN_5G_CAPABILITY: 5 GHz capable 566 */ 567 typedef enum { 568 WMI_HOST_WLAN_2G_CAPABILITY = 0x1, 569 WMI_HOST_WLAN_5G_CAPABILITY = 0x2, 570 } WMI_HOST_WLAN_BAND_CAPABILITY; 571 572 /** 573 * enum wmi_host_channel_width: Channel operating width. Maps to 574 * wmi_channel_width used in firmware header file(s). 575 * @WMI_HOST_CHAN_WIDTH_20: 20 MHz channel operating width 576 * @WMI_HOST_CHAN_WIDTH_40: 40 MHz channel operating width 577 * @WMI_HOST_CHAN_WIDTH_80: 80 MHz channel operating width 578 * @WMI_HOST_CHAN_WIDTH_160: 160 MHz channel operating width 579 * @WMI_HOST_CHAN_WIDTH_80P80: 80+80 MHz channel operating width 580 * @WMI_HOST_CHAN_WIDTH_5: 5 MHz channel operating width 581 * @WMI_HOST_CHAN_WIDTH_10: 10 MHz channel operating width 582 */ 583 typedef enum { 584 WMI_HOST_CHAN_WIDTH_20 = 0, 585 WMI_HOST_CHAN_WIDTH_40 = 1, 586 WMI_HOST_CHAN_WIDTH_80 = 2, 587 WMI_HOST_CHAN_WIDTH_160 = 3, 588 WMI_HOST_CHAN_WIDTH_80P80 = 4, 589 WMI_HOST_CHAN_WIDTH_5 = 5, 590 WMI_HOST_CHAN_WIDTH_10 = 6, 591 } wmi_host_channel_width; 592 593 #define MAX_NUM_CHAN 128 594 595 #define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1) 596 #define ATH_TXOP_TO_US(v) (v<<5) 597 /* WME stream classes */ 598 #define WMI_HOST_AC_BE 0 /* best effort */ 599 #define WMI_HOST_AC_BK 1 /* background */ 600 #define WMI_HOST_AC_VI 2 /* video */ 601 #define WMI_HOST_AC_VO 3 /* voice */ 602 #define WMI_TID_TO_AC(_tid) (\ 603 (((_tid) == 0) || ((_tid) == 3)) ? WMI_HOST_AC_BE : \ 604 (((_tid) == 1) || ((_tid) == 2)) ? WMI_HOST_AC_BK : \ 605 (((_tid) == 4) || ((_tid) == 5)) ? WMI_HOST_AC_VI : \ 606 WMI_HOST_AC_VO) 607 608 /** 609 * struct vdev_create_params - vdev create cmd parameter 610 * @if_id: interface id 611 * @type: interface type 612 * @subtype: interface subtype 613 * @nss_2g: NSS for 2G 614 * @nss_5g: NSS for 5G 615 * @pdev_id: pdev id on pdev for this vdev 616 */ 617 struct vdev_create_params { 618 uint8_t if_id; 619 uint32_t type; 620 uint32_t subtype; 621 uint8_t nss_2g; 622 uint8_t nss_5g; 623 uint32_t pdev_id; 624 }; 625 626 /** 627 * struct vdev_delete_params - vdev delete cmd parameter 628 * @if_id: interface id 629 */ 630 struct vdev_delete_params { 631 uint8_t if_id; 632 }; 633 634 /** 635 * struct channel_param - Channel parameters with all 636 * info required by target. 637 * @chan_id: channel id 638 * @pwr: channel power 639 * @mhz: channel frequency 640 * @half_rate: is half rate 641 * @quarter_rate: is quarter rate 642 * @dfs_set: is dfs channel 643 * @dfs_set_cfreq2: is secondary freq dfs channel 644 * @is_chan_passive: is this passive channel 645 * @allow_ht: HT allowed in chan 646 * @allow_vht: VHT allowed on chan 647 * @set_agile: is agile mode 648 * @phy_mode: phymode (vht80 or ht40 or ...) 649 * @cfreq1: centre frequency on primary 650 * @cfreq2: centre frequency on secondary 651 * @maxpower: max power for channel 652 * @minpower: min power for channel 653 * @maxreqpower: Max regulatory power 654 * @antennamac: Max antenna 655 * @reg_class_id: Regulatory class id. 656 */ 657 658 struct channel_param { 659 uint8_t chan_id; 660 uint8_t pwr; 661 uint32_t mhz; 662 uint32_t half_rate:1, 663 quarter_rate:1, 664 dfs_set:1, 665 dfs_set_cfreq2:1, 666 is_chan_passive:1, 667 allow_ht:1, 668 allow_vht:1, 669 set_agile:1; 670 uint32_t phy_mode; 671 uint32_t cfreq1; 672 uint32_t cfreq2; 673 int8_t maxpower; 674 int8_t minpower; 675 int8_t maxregpower; 676 uint8_t antennamax; 677 uint8_t reg_class_id; 678 }; 679 680 /** 681 * struct vdev_stop_params - vdev stop cmd parameter 682 * @vdev_id: vdev id 683 */ 684 struct vdev_stop_params { 685 uint8_t vdev_id; 686 }; 687 688 /** 689 * struct vdev_up_params - vdev up cmd parameter 690 * @vdev_id: vdev id 691 * @assoc_id: association id 692 */ 693 struct vdev_up_params { 694 uint8_t vdev_id; 695 uint16_t assoc_id; 696 }; 697 698 /** 699 * struct vdev_down_params - vdev down cmd parameter 700 * @vdev_id: vdev id 701 */ 702 struct vdev_down_params { 703 uint8_t vdev_id; 704 }; 705 706 /** 707 * struct mac_ssid - mac ssid structure 708 * @length: 709 * @mac_ssid[WMI_MAC_MAX_SSID_LENGTH]: 710 */ 711 struct mac_ssid { 712 uint8_t length; 713 uint8_t mac_ssid[WMI_MAC_MAX_SSID_LENGTH]; 714 } qdf_packed; 715 716 /** 717 * enum wmi_bcn_tx_rate_code - beacon tx rate code 718 */ 719 enum wmi_bcn_tx_rate_code { 720 WMI_BCN_TX_RATE_CODE_1_M = 0x43, 721 WMI_BCN_TX_RATE_CODE_2_M = 0x42, 722 WMI_BCN_TX_RATE_CODE_5_5_M = 0x41, 723 WMI_BCN_TX_RATE_CODE_6_M = 0x03, 724 WMI_BCN_TX_RATE_CODE_9_M = 0x07, 725 WMI_BCN_TX_RATE_CODE_11M = 0x40, 726 WMI_BCN_TX_RATE_CODE_12_M = 0x02, 727 WMI_BCN_TX_RATE_CODE_18_M = 0x06, 728 WMI_BCN_TX_RATE_CODE_24_M = 0x01, 729 WMI_BCN_TX_RATE_CODE_36_M = 0x05, 730 WMI_BCN_TX_RATE_CODE_48_M = 0x00, 731 WMI_BCN_TX_RATE_CODE_54_M = 0x04, 732 }; 733 734 /** 735 * struct vdev_start_params - vdev start cmd parameter 736 * @vdev_id: vdev id 737 * @chan_freq: channel frequency 738 * @chan_mode: channel mode 739 * @band_center_freq1: center freq 1 740 * @band_center_freq2: center freq 2 741 * @flags: flags to set like pmf_enabled etc. 742 * @is_dfs: flag to check if dfs enabled 743 * @beacon_intval: beacon interval 744 * @dtim_period: dtim period 745 * @max_txpow: max tx power 746 * @is_restart: flag to check if it is vdev 747 * @ssid: ssid and ssid length info 748 * @preferred_tx_streams: preferred tx streams 749 * @preferred_rx_streams: preferred rx streams 750 * @intr_update: flag to check if need to update 751 * required wma interface params 752 * @intr_ssid: pointer to wma interface ssid 753 * @intr_flags: pointer to wma interface flags 754 * @requestor_id: to update requestor id 755 * @disable_hw_ack: to update disable hw ack flag 756 * @info: to update channel info 757 * @reg_info_1: to update min power, max power, 758 * reg power and reg class id 759 * @reg_info_2: to update antennamax 760 * @cac_duration_ms: cac duration in milliseconds 761 * @regdomain: Regulatory domain 762 * @oper_mode: Operating mode 763 * @dfs_pri_multiplier: DFS primary multiplier 764 * allow pulse if they are within multiple of PRI for the radar type 765 * @dot11_mode: Phy mode (VHT20/VHT80...) 766 * @disable_hw_ack: Disable hw ack if chan is dfs channel for cac 767 * @channel_param: Channel params required by target. 768 * @bcn_tx_rate_code: Beacon tx rate code. 769 * @ldpc_rx_enabled: Enable/Disable LDPC RX for this vdev 770 */ 771 struct vdev_start_params { 772 uint8_t vdev_id; 773 uint32_t chan_freq; 774 uint32_t chan_mode; 775 uint32_t band_center_freq1; 776 uint32_t band_center_freq2; 777 uint32_t flags; 778 bool is_dfs; 779 uint32_t beacon_intval; 780 uint32_t dtim_period; 781 int32_t max_txpow; 782 bool is_restart; 783 bool is_half_rate; 784 bool is_quarter_rate; 785 uint32_t dis_hw_ack; 786 uint32_t flag_dfs; 787 uint8_t hidden_ssid; 788 uint8_t pmf_enabled; 789 struct mac_ssid ssid; 790 uint32_t num_noa_descriptors; 791 uint32_t preferred_rx_streams; 792 uint32_t preferred_tx_streams; 793 uint32_t cac_duration_ms; 794 uint32_t regdomain; 795 uint32_t he_ops; 796 #ifndef CONFIG_MCL 797 uint8_t oper_mode; 798 int32_t dfs_pri_multiplier; 799 uint8_t dot11_mode; 800 uint8_t disable_hw_ack; 801 struct channel_param channel; 802 #endif 803 enum wmi_bcn_tx_rate_code bcn_tx_rate_code; 804 bool ldpc_rx_enabled; 805 }; 806 807 /** 808 * struct vdev_scan_nac_rssi_params - NAC_RSSI cmd parameter 809 * @vdev_id: vdev id 810 * @bssid_addr: BSSID address 811 * @client_addr: client address 812 * @chan_num: channel number 813 * @action:NAC_RSSI action, 814 */ 815 struct vdev_scan_nac_rssi_params { 816 uint32_t vdev_id; 817 uint8_t bssid_addr[IEEE80211_ADDR_LEN]; 818 uint8_t client_addr[IEEE80211_ADDR_LEN]; 819 uint32_t chan_num; 820 uint32_t action; /* WMI_FILTER_NAC_RSSI_ACTION */ 821 }; 822 823 /** 824 * struct hidden_ssid_vdev_restart_params - 825 * vdev restart cmd parameter 826 * @session_id: session id 827 * @ssid_len: ssid length 828 * @ssid: ssid 829 * @flags: flags 830 * @requestor_id: requestor id 831 * @disable_hw_ack: flag to disable hw ack feature 832 * @mhz: channel frequency 833 * @band_center_freq1: center freq 1 834 * @band_center_freq2: center freq 2 835 * @info: channel info 836 * @reg_info_1: contains min power, max power, 837 * reg power and reg class id 838 * @reg_info_2: contains antennamax 839 * @hidden_ssid_restart_in_progress: 840 * flag to check if restart is in progress 841 */ 842 struct hidden_ssid_vdev_restart_params { 843 uint8_t session_id; 844 uint32_t ssid_len; 845 uint32_t ssid[8]; 846 uint32_t flags; 847 uint32_t requestor_id; 848 uint32_t disable_hw_ack; 849 uint32_t mhz; 850 uint32_t band_center_freq1; 851 uint32_t band_center_freq2; 852 uint32_t info; 853 uint32_t reg_info_1; 854 uint32_t reg_info_2; 855 qdf_atomic_t hidden_ssid_restart_in_progress; 856 }; 857 858 /** 859 * struct vdev_set_params - vdev set cmd parameter 860 * @if_id: vdev id 861 * @param_id: parameter id 862 * @param_value: parameter value 863 */ 864 struct vdev_set_params { 865 uint32_t if_id; 866 uint32_t param_id; 867 uint32_t param_value; 868 }; 869 870 871 /** 872 * struct peer_delete_params - peer delete cmd parameter 873 * @vdev_id: vdev id 874 */ 875 struct peer_delete_params { 876 uint8_t vdev_id; 877 }; 878 879 /** 880 * struct peer_flush_params - peer flush cmd parameter 881 * @peer_tid_bitmap: peer tid bitmap 882 * @vdev_id: vdev id 883 */ 884 struct peer_flush_params { 885 uint32_t peer_tid_bitmap; 886 uint8_t vdev_id; 887 }; 888 889 /** 890 * struct peer_set_params - peer set cmd parameter 891 * @param_id: parameter id 892 * @param_value: parameter value 893 * @vdev_id: vdev id 894 */ 895 struct peer_set_params { 896 uint32_t param_id; 897 uint32_t param_value; 898 uint32_t vdev_id; 899 }; 900 901 /** 902 * struct peer_create_params - peer create cmd parameter 903 * @peer_addr: peer mac addr 904 * @peer_type: peer type 905 * @vdev_id: vdev id 906 */ 907 struct peer_create_params { 908 const uint8_t *peer_addr; 909 uint32_t peer_type; 910 uint32_t vdev_id; 911 }; 912 913 /** 914 * struct peer_remove_params - peer remove cmd parameter 915 * @bssid: bss id 916 * @vdev_id: vdev id 917 * @roam_synch_in_progress: flag to indicate if roaming is in progress 918 */ 919 struct peer_remove_params { 920 uint8_t *bssid; 921 uint8_t vdev_id; 922 bool roam_synch_in_progress; 923 }; 924 925 /** 926 * Stats ID enums defined in host 927 */ 928 typedef enum { 929 WMI_HOST_REQUEST_PEER_STAT = 0x01, 930 WMI_HOST_REQUEST_AP_STAT = 0x02, 931 WMI_HOST_REQUEST_PDEV_STAT = 0x04, 932 WMI_HOST_REQUEST_VDEV_STAT = 0x08, 933 WMI_HOST_REQUEST_BCNFLT_STAT = 0x10, 934 WMI_HOST_REQUEST_VDEV_RATE_STAT = 0x20, 935 WMI_HOST_REQUEST_INST_STAT = 0x40, 936 WMI_HOST_REQUEST_PEER_EXTD_STAT = 0x80, 937 WMI_HOST_REQUEST_VDEV_EXTD_STAT = 0x100, 938 WMI_HOST_REQUEST_NAC_RSSI = 0x200, 939 WMI_HOST_REQUEST_BCN_STAT = 0x800, 940 } wmi_host_stats_id; 941 942 typedef struct { 943 uint16_t cfg_retry_count; 944 uint16_t retry_count; 945 } wmi_host_inst_rssi_args; 946 947 /** 948 * struct stats_request_params - stats_request cmd parameter 949 * @stats_id: Bit mask of all the STATS request are specified with values from wmi_host_stats_id 950 * @vdev_id: vdev id 951 * @pdev_id: pdev_id 952 * @wmi_host_inst_rssi_args: Instantaneous rssi stats args 953 */ 954 struct stats_request_params { 955 uint32_t stats_id; 956 uint8_t vdev_id; 957 uint8_t pdev_id; 958 wmi_host_inst_rssi_args rssi_args; 959 }; 960 961 /** 962 * struct bss_chan_info_request_params - BSS chan info params 963 * @param: parameter value 964 */ 965 struct bss_chan_info_request_params { 966 uint32_t param; 967 }; 968 969 /** 970 * struct wow_cmd_params - wow cmd parameter 971 * @enable: wow enable or disable flag 972 * @can_suspend_link: flag to indicate if link can be suspended 973 * @pause_iface_config: interface config 974 */ 975 struct wow_cmd_params { 976 bool enable; 977 bool can_suspend_link; 978 uint8_t pause_iface_config; 979 uint32_t flags; 980 }; 981 982 /** 983 * struct wow_add_wakeup_params - wow wakeup parameter 984 * @type: param type 985 */ 986 struct wow_add_wakeup_params { 987 uint32_t type; 988 }; 989 990 /** 991 * struct wow_add_wakeup_pattern_params - Add WoW pattern params 992 * @pattern_bytes: pointer to pattern bytes 993 * @mask_bytes: pointer to mask bytes 994 * @pattern_len: pattern length 995 * @pattern_id: pattern id 996 */ 997 struct wow_add_wakeup_pattern_params { 998 uint8_t *pattern_bytes; 999 uint8_t *mask_bytes; 1000 uint32_t pattern_len; 1001 uint32_t pattern_id; 1002 }; 1003 1004 /** 1005 * struct wow_remove_wakeup_pattern params - WoW remove pattern param 1006 * @pattern_bytes: pointer to pattern bytes 1007 * @mask_bytes: Mask bytes 1008 * @pattern_id: pattern identifier 1009 */ 1010 struct wow_remove_wakeup_pattern_params { 1011 uint32_t *pattern_bytes; 1012 uint32_t *mask_bytes; 1013 uint32_t pattern_id; 1014 }; 1015 1016 1017 /** 1018 * struct packet_enable_params - packet enable cmd parameter 1019 * @vdev_id: vdev id 1020 * @enable: flag to indicate if parameter can be enabled or disabled 1021 */ 1022 struct packet_enable_params { 1023 uint8_t vdev_id; 1024 bool enable; 1025 }; 1026 1027 /** 1028 * struct suspend_params - suspend cmd parameter 1029 * @disable_target_intr: disable target interrupt 1030 */ 1031 struct suspend_params { 1032 uint8_t disable_target_intr; 1033 }; 1034 1035 /** 1036 * struct pdev_params - pdev set cmd parameter 1037 * @param_id: parameter id 1038 * @param_value: parameter value 1039 */ 1040 struct pdev_params { 1041 uint32_t param_id; 1042 uint32_t param_value; 1043 }; 1044 1045 /** 1046 * struct beacon_tmpl_params - beacon template cmd parameter 1047 * @vdev_id: vdev id 1048 * @tim_ie_offset: tim ie offset 1049 * @tmpl_len: beacon template length 1050 * @tmpl_len_aligned: beacon template alignment 1051 * @csa_switch_count_offset: CSA swith count offset in beacon frame 1052 * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame 1053 * @frm: beacon template parameter 1054 */ 1055 struct beacon_tmpl_params { 1056 uint8_t vdev_id; 1057 uint32_t tim_ie_offset; 1058 uint32_t tmpl_len; 1059 uint32_t tmpl_len_aligned; 1060 uint32_t csa_switch_count_offset; 1061 uint32_t ext_csa_switch_count_offset; 1062 uint8_t *frm; 1063 }; 1064 1065 /** 1066 * struct beacon_params - beacon cmd parameter 1067 * @vdev_id: vdev id 1068 * @beaconInterval: Beacon interval 1069 * @wbuf: beacon buffer 1070 * @frame_ctrl: frame control field 1071 * @bcn_txant: beacon antenna 1072 * @is_dtim_count_zero: is it dtim beacon 1073 * @is_bitctl_reqd: is Bit control required 1074 * @is_high_latency: Is this high latency target 1075 */ 1076 struct beacon_params { 1077 uint8_t vdev_id; 1078 uint16_t beaconInterval; 1079 qdf_nbuf_t wbuf; 1080 uint16_t frame_ctrl; 1081 uint32_t bcn_txant; 1082 bool is_dtim_count_zero; 1083 bool is_bitctl_reqd; 1084 bool is_high_latency; 1085 }; 1086 1087 /** 1088 * struct fd_params - FD cmd parameter 1089 * @vdev_id: vdev id 1090 * @wbuf: FD buffer 1091 * @frame_ctrl: frame control field 1092 */ 1093 struct fd_params { 1094 uint8_t vdev_id; 1095 qdf_nbuf_t wbuf; 1096 uint16_t frame_ctrl; 1097 }; 1098 1099 /** 1100 * struct bcn_prb_template_params - beacon probe template parameter 1101 * @vdev_id: vdev id 1102 * @buf_len: Template length 1103 * @caps: capabilities field 1104 * @erp: ERP field 1105 */ 1106 struct bcn_prb_template_params { 1107 uint8_t vdev_id; 1108 int buf_len; 1109 uint16_t caps; 1110 uint8_t erp; 1111 }; 1112 1113 #define WMI_MAX_SUPPORTED_RATES 128 1114 /** 1115 * struct target_rate_set - Rate set bitmap 1116 * @num_rate: number of rates in rates bitmap 1117 * @rates: rates (each 8bit value) packed into a 32 bit word. 1118 * the rates are filled from least significant byte to most 1119 * significant byte. 1120 */ 1121 typedef struct { 1122 uint32_t num_rates; 1123 uint32_t rates[(WMI_MAX_SUPPORTED_RATES / 4) + 1]; 1124 } target_rate_set; 1125 1126 1127 #define WMI_HOST_MAX_NUM_SS 8 1128 #define WMI_HOST_MAX_HECAP_PHY_SIZE 3 1129 #define WMI_HOST_MAX_HE_RATE_SET 3 1130 /** 1131 * struct wmi_host_ppe_threshold -PPE threshold 1132 * @numss_m1: NSS - 1 1133 * @ru_bit_mask: RU bit mask indicating the supported RU's 1134 * @ppet16_ppet8_ru3_ru0: ppet8 and ppet16 for max num ss 1135 */ 1136 struct wmi_host_ppe_threshold { 1137 uint32_t numss_m1; 1138 uint32_t ru_bit_mask; 1139 uint32_t ppet16_ppet8_ru3_ru0[WMI_HOST_MAX_NUM_SS]; 1140 }; 1141 1142 /** 1143 * struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr 1144 * @mac_addr31to0: upper 4 bytes of MAC address 1145 * @mac_addr47to32: lower 2 bytes of MAC address 1146 */ 1147 typedef struct { 1148 uint32_t mac_addr31to0; 1149 uint32_t mac_addr47to32; 1150 } wmi_host_mac_addr; 1151 1152 /** 1153 * struct peer_assoc_params - peer assoc cmd parameter 1154 * @peer_macaddr: peer mac address 1155 * @vdev_id: vdev id 1156 * @peer_new_assoc: peer association type 1157 * @peer_associd: peer association id 1158 * @peer_flags: peer flags 1159 * @peer_caps: peer capabalities 1160 * @peer_listen_intval: peer listen interval 1161 * @peer_ht_caps: HT capabalities 1162 * @peer_max_mpdu: 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k 1163 * @peer_mpdu_density: 3 : 0~7 : 2^(11nAMPDUdensity -4) 1164 * @peer_rate_caps: peer rate capabalities 1165 * @peer_nss: peer nss 1166 * @peer_phymode: peer phymode 1167 * @peer_ht_info: peer HT info 1168 * @peer_legacy_rates: peer legacy rates 1169 * @peer_ht_rates: peer ht rates 1170 * @rx_max_rate: max rx rates 1171 * @rx_mcs_set: rx mcs 1172 * @tx_max_rate: max tx rates 1173 * @tx_mcs_set: tx mcs 1174 * @vht_capable: VHT capabalities 1175 * @tx_max_mcs_nss: max tx MCS and NSS 1176 * @peer_bw_rxnss_override: Peer BW RX NSS overridden or not. 1177 * @is_pmf_enabled: PMF enabled 1178 * @is_wme_set: WME enabled 1179 * @qos_flag: QoS Flags 1180 * @apsd_flag: APSD flags 1181 * @ht_flag: HT flags 1182 * @bw_40: 40 capabale 1183 * @bw_80: 80 capabale 1184 * @bw_160: 160 capabale 1185 * @stbc_flag: STBC flag 1186 * @ldpc_flag: LDPC flag 1187 * @static_mimops_flag: statis MIMO PS flags 1188 * @dynamic_mimops_flag: Dynamic MIMO PS flags 1189 * @spatial_mux_flag: spatial MUX flags 1190 * @vht_flag: VHT flags 1191 * @vht_ng_flag: VHT on 11N/G flags 1192 * @need_ptk_4_way: Needs 4 way handshake 1193 * @need_gtk_2_way: Needs 2 way GTK 1194 * @auth_flag: Is peer authenticated 1195 * @safe_mode_enabled: Safe enabled for this peer 1196 * @amsdu_disable: AMSDU disble 1197 * @peer_mac: Peer mac address 1198 * @he_flag: HE flags 1199 * @twt_requester: TWT Requester Support bit in Extended Capabilities element 1200 * @twt_responder: TWT Responder Support bit in Extended Capabilities element 1201 * @peer_he_cap_macinfo: Peer HE Cap MAC info 1202 * @peer_he_ops: Peer HE operation info 1203 * @peer_he_cap_phyinfo: Peer HE Cap PHY info 1204 * @peer_he_mcs_count: Peer HE MCS TX/RX MAP count 1205 * @peer_he_rx_mcs_set: Peer HE RX MCS MAP 1206 * @peer_he_tx_mcs_set: Peer HE TX MCS MAP 1207 * @peer_ppet: Peer HE PPET info 1208 */ 1209 struct peer_assoc_params { 1210 wmi_host_mac_addr peer_macaddr; 1211 uint32_t vdev_id; 1212 uint32_t peer_new_assoc; 1213 uint32_t peer_associd; 1214 uint32_t peer_flags; 1215 uint32_t peer_caps; 1216 uint32_t peer_listen_intval; 1217 uint32_t peer_ht_caps; 1218 uint32_t peer_max_mpdu; 1219 uint32_t peer_mpdu_density; 1220 uint32_t peer_rate_caps; 1221 uint32_t peer_nss; 1222 uint32_t peer_vht_caps; 1223 uint32_t peer_phymode; 1224 uint32_t peer_ht_info[2]; 1225 target_rate_set peer_legacy_rates; 1226 target_rate_set peer_ht_rates; 1227 uint32_t rx_max_rate; 1228 uint32_t rx_mcs_set; 1229 uint32_t tx_max_rate; 1230 uint32_t tx_mcs_set; 1231 uint8_t vht_capable; 1232 uint32_t peer_bw_rxnss_override; 1233 #ifndef CONFIG_MCL 1234 uint32_t tx_max_mcs_nss; 1235 bool is_pmf_enabled; 1236 bool is_wme_set; 1237 bool qos_flag; 1238 bool apsd_flag; 1239 bool ht_flag; 1240 bool bw_40; 1241 bool bw_80; 1242 bool bw_160; 1243 bool stbc_flag; 1244 bool ldpc_flag; 1245 bool static_mimops_flag; 1246 bool dynamic_mimops_flag; 1247 bool spatial_mux_flag; 1248 bool vht_flag; 1249 bool vht_ng_flag; 1250 bool need_ptk_4_way; 1251 bool need_gtk_2_way; 1252 bool auth_flag; 1253 bool safe_mode_enabled; 1254 bool amsdu_disable; 1255 /* Use common structure */ 1256 uint8_t peer_mac[IEEE80211_ADDR_LEN]; 1257 #endif 1258 bool he_flag; 1259 bool twt_requester; 1260 bool twt_responder; 1261 uint32_t peer_he_cap_macinfo; 1262 uint32_t peer_he_ops; 1263 uint32_t peer_he_cap_phyinfo[WMI_HOST_MAX_HECAP_PHY_SIZE]; 1264 uint32_t peer_he_mcs_count; 1265 uint32_t peer_he_rx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; 1266 uint32_t peer_he_tx_mcs_set[WMI_HOST_MAX_HE_RATE_SET]; 1267 struct wmi_host_ppe_threshold peer_ppet; 1268 }; 1269 1270 /** 1271 * struct sta_ps_params - sta ps cmd parameter 1272 * @vdev_id: vdev id 1273 * @param: sta ps parameter 1274 * @value: sta ps parameter value 1275 */ 1276 struct sta_ps_params { 1277 uint32_t vdev_id; 1278 uint32_t param; 1279 uint32_t value; 1280 }; 1281 1282 /** 1283 * struct ap_ps_params - ap ps cmd parameter 1284 * @vdev_id: vdev id 1285 * @param: ap ps parameter 1286 * @value: ap ps parameter value 1287 */ 1288 struct ap_ps_params { 1289 uint32_t vdev_id; 1290 uint32_t param; 1291 uint32_t value; 1292 }; 1293 1294 #define WMI_HOST_SCAN_CHAN_FREQ_SHIFT 0 1295 #define WMI_HOST_SCAN_CHAN_FREQ_MASK 0xffff 1296 #define WMI_HOST_SCAN_CHAN_MODE_SHIFT 16 1297 #define WMI_HOST_SCAN_CHAN_MODE_MASK 0xff 1298 1299 #define WMI_HOST_MAX_CHANS_PER_WMI_CMD 58 1300 1301 /** 1302 * struct scan_chan_list_params - scan channel list cmd parameter 1303 * @num_scan_chans: no of scan channels 1304 * @chan_info: pointer to wmi channel info 1305 */ 1306 #ifdef CONFIG_MCL 1307 /* TODO: This needs clean-up based on how its processed. */ 1308 typedef struct { 1309 /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */ 1310 uint32_t tlv_header; 1311 /** primary 20 MHz channel frequency in mhz */ 1312 uint32_t mhz; 1313 /** Center frequency 1 in MHz*/ 1314 uint32_t band_center_freq1; 1315 /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/ 1316 uint32_t band_center_freq2; 1317 /** channel info described below */ 1318 uint32_t info; 1319 /** contains min power, max power, reg power and reg class id. */ 1320 uint32_t reg_info_1; 1321 /** contains antennamax */ 1322 uint32_t reg_info_2; 1323 } wmi_channel_param; 1324 1325 struct scan_chan_list_params { 1326 uint32_t pdev_id; 1327 uint8_t num_scan_chans; 1328 wmi_channel_param *chan_info; 1329 }; 1330 #else 1331 /** 1332 * struct scan_chan_list_params - scan channel list cmd parameter 1333 * @pdev_id: pdev_id 1334 * @num_chan: no of scan channels 1335 * @nallchans: nall chans 1336 * @append: append to existing chan list 1337 * @ch_param: pointer to channel_paramw 1338 */ 1339 struct scan_chan_list_params { 1340 uint32_t pdev_id; 1341 uint16_t nallchans; 1342 bool append; 1343 struct channel_param ch_param[1]; 1344 }; 1345 #endif 1346 1347 /** 1348 * struct multiple_vdev_restart_params - Multiple vdev restart cmd parameter 1349 * @pdev_id: Pdev identifier 1350 * @requestor_id: Unique id identifying the module 1351 * @disable_hw_ack: Flag to indicate disabling HW ACK during CAC 1352 * @cac_duration_ms: CAC duration on the given channel 1353 * @num_vdevs: No. of vdevs that need to be restarted 1354 * @ch_param: Pointer to channel_param 1355 * @vdev_ids: Pointer to array of vdev_ids 1356 */ 1357 struct multiple_vdev_restart_params { 1358 uint32_t pdev_id; 1359 uint32_t requestor_id; 1360 uint32_t disable_hw_ack; 1361 uint32_t cac_duration_ms; 1362 uint32_t num_vdevs; 1363 struct channel_param ch_param; 1364 uint32_t vdev_ids[WMI_HOST_PDEV_MAX_VDEVS]; 1365 }; 1366 /** 1367 * struct fw_hang_params - fw hang command parameters 1368 * @type: 0:unused 1: ASSERT, 2:not respond detect command, 3:simulate ep-full 1369 * @delay_time_ms: 0xffffffff means the simulate will delay for random time (0 ~0xffffffff ms) 1370 */ 1371 struct fw_hang_params { 1372 uint32_t type; 1373 uint32_t delay_time_ms; 1374 }; 1375 1376 /** 1377 * struct pdev_utf_params - pdev utf command parameters 1378 * @utf_payload: 1379 * @len: 1380 * @is_ar900b: is it 900b target 1381 */ 1382 struct pdev_utf_params { 1383 uint8_t *utf_payload; 1384 uint32_t len; 1385 #ifndef CONFIG_MCL 1386 bool is_ar900b; 1387 #endif 1388 }; 1389 1390 /*Adding this due to dependency on wmi_unified.h 1391 */ 1392 typedef struct { 1393 uint32_t len; 1394 uint32_t msgref; 1395 uint32_t segmentInfo; 1396 } QVIT_SEG_HDR_INFO_STRUCT; 1397 1398 struct pdev_qvit_params { 1399 uint8_t *utf_payload; 1400 uint32_t len; 1401 }; 1402 /** 1403 * struct crash_inject - crash inject command parameters 1404 * @type: crash inject type 1405 * @delay_time_ms: time in milliseconds for FW to delay the crash 1406 */ 1407 struct crash_inject { 1408 uint32_t type; 1409 uint32_t delay_time_ms; 1410 }; 1411 1412 /** 1413 * struct dbglog_params - fw deboglog command parameters 1414 * @param: command parameter 1415 * @val: parameter value 1416 * @module_id_bitmap: fixed length module id bitmap 1417 * @bitmap_len: module id bitmap length 1418 * @cfgvalid: cfgvalid 1419 */ 1420 struct dbglog_params { 1421 uint32_t param; 1422 uint32_t val; 1423 uint32_t *module_id_bitmap; 1424 uint32_t bitmap_len; 1425 #ifndef CONFIG_MCL 1426 uint32_t cfgvalid[2]; 1427 #endif 1428 }; 1429 1430 /** 1431 * struct seg_hdr_info - header info 1432 * @len: length 1433 * @msgref: message reference 1434 * @segmentInfo: segment info 1435 * @pad: padding 1436 */ 1437 struct seg_hdr_info { 1438 uint32_t len; 1439 uint32_t msgref; 1440 uint32_t segmentInfo; 1441 uint32_t pad; 1442 }; 1443 1444 /** 1445 * struct tx_send_params - TX parameters 1446 * @pwr: Tx frame transmission power 1447 * @mcs_mask: Modulation and coding index mask for transmission 1448 * bit 0 -> CCK 1 Mbps rate is allowed 1449 * bit 1 -> CCK 2 Mbps rate is allowed 1450 * bit 2 -> CCK 5.5 Mbps rate is allowed 1451 * bit 3 -> CCK 11 Mbps rate is allowed 1452 * bit 4 -> OFDM BPSK modulation, 1/2 coding rate is allowed 1453 * bit 5 -> OFDM BPSK modulation, 3/4 coding rate is allowed 1454 * bit 6 -> OFDM QPSK modulation, 1/2 coding rate is allowed 1455 * bit 7 -> OFDM QPSK modulation, 3/4 coding rate is allowed 1456 * bit 8 -> OFDM 16-QAM modulation, 1/2 coding rate is allowed 1457 * bit 9 -> OFDM 16-QAM modulation, 3/4 coding rate is allowed 1458 * bit 10 -> OFDM 64-QAM modulation, 2/3 coding rate is allowed 1459 * bit 11 -> OFDM 64-QAM modulation, 3/4 coding rate is allowed 1460 * @nss_mask: Spatial streams permitted 1461 * bit 0: if set, Nss = 1 (non-MIMO) is permitted 1462 * bit 1: if set, Nss = 2 (2x2 MIMO) is permitted 1463 * bit 2: if set, Nss = 3 (3x3 MIMO) is permitted 1464 * bit 3: if set, Nss = 4 (4x4 MIMO) is permitted 1465 * bit 4: if set, Nss = 5 (5x5 MIMO) is permitted 1466 * bit 5: if set, Nss = 6 (6x6 MIMO) is permitted 1467 * bit 6: if set, Nss = 7 (7x7 MIMO) is permitted 1468 * bit 7: if set, Nss = 8 (8x8 MIMO) is permitted 1469 * If no bits are set, target will choose what NSS type to use 1470 * @retry_limit: Maximum number of retries before ACK 1471 * @chain_mask: Chains to be used for transmission 1472 * @bw_mask: Bandwidth to be used for transmission 1473 * bit 0 -> 5MHz 1474 * bit 1 -> 10MHz 1475 * bit 2 -> 20MHz 1476 * bit 3 -> 40MHz 1477 * bit 4 -> 80MHz 1478 * bit 5 -> 160MHz 1479 * bit 6 -> 80_80MHz 1480 * @preamble_type: Preamble types for transmission 1481 * bit 0: if set, OFDM 1482 * bit 1: if set, CCK 1483 * bit 2: if set, HT 1484 * bit 3: if set, VHT 1485 * bit 4: if set, HE 1486 * @frame_type: Data or Management frame 1487 * Data:1 Mgmt:0 1488 */ 1489 struct tx_send_params { 1490 uint32_t pwr:8, 1491 mcs_mask:12, 1492 nss_mask:8, 1493 retry_limit:4; 1494 uint32_t chain_mask:8, 1495 bw_mask:7, 1496 preamble_type:5, 1497 frame_type:1, 1498 reserved:11; 1499 }; 1500 1501 /** 1502 * struct wmi_mgmt_params - wmi mgmt cmd parameters 1503 * @tx_frame: management tx frame 1504 * @frm_len: frame length 1505 * @vdev_id: vdev id 1506 * @chanfreq: channel frequency 1507 * @pdata: frame data 1508 * @desc_id: descriptor id relyaed back by target 1509 * @macaddr: macaddr of peer 1510 * @qdf_ctx: qdf context for qdf_nbuf_map 1511 * @tx_param: TX send parameters 1512 * @tx_params_valid: Flag that indicates if TX params are valid 1513 * @use_6mbps: specify whether management frame to transmit should 1514 * use 6 Mbps rather than 1 Mbps min rate(for 5GHz band or P2P) 1515 * @tx_type: type of management frame (determines what callback to use) 1516 */ 1517 struct wmi_mgmt_params { 1518 void *tx_frame; 1519 uint16_t frm_len; 1520 uint8_t vdev_id; 1521 uint16_t chanfreq; 1522 void *pdata; 1523 uint16_t desc_id; 1524 uint8_t *macaddr; 1525 void *qdf_ctx; 1526 struct tx_send_params tx_param; 1527 bool tx_params_valid; 1528 uint8_t use_6mbps; 1529 uint8_t tx_type; 1530 }; 1531 1532 /** 1533 * struct wmi_offchan_data_tx_params - wmi offchan data tx cmd parameters 1534 * @tx_frame: management tx frame 1535 * @frm_len: frame length 1536 * @vdev_id: vdev id 1537 * @chanfreq: channel frequency 1538 * @pdata: frame data 1539 * @desc_id: descriptor id relyaed back by target 1540 * @macaddr: macaddr of peer 1541 * @qdf_ctx: qdf context for qdf_nbuf_map 1542 * @tx_param: TX send parameters 1543 * @tx_params_valid: Flag that indicates if TX params are valid 1544 */ 1545 struct wmi_offchan_data_tx_params { 1546 void *tx_frame; 1547 uint16_t frm_len; 1548 uint8_t vdev_id; 1549 uint16_t chanfreq; 1550 void *pdata; 1551 uint16_t desc_id; 1552 uint8_t *macaddr; 1553 void *qdf_ctx; 1554 struct tx_send_params tx_param; 1555 bool tx_params_valid; 1556 }; 1557 1558 /** 1559 * struct p2p_ps_params - P2P powersave related params 1560 * @opp_ps: opportunistic power save 1561 * @ctwindow: CT window 1562 * @count: count 1563 * @duration: duration 1564 * @interval: interval 1565 * @single_noa_duration: single shot noa duration 1566 * @ps_selection: power save selection 1567 * @session_id: session id 1568 */ 1569 struct p2p_ps_params { 1570 uint8_t opp_ps; 1571 uint32_t ctwindow; 1572 uint8_t count; 1573 uint32_t duration; 1574 uint32_t interval; 1575 uint32_t single_noa_duration; 1576 uint8_t ps_selection; 1577 uint8_t session_id; 1578 }; 1579 1580 #ifndef CONVERGED_TDLS_ENABLE 1581 /** 1582 * struct sta_uapsd_params - uapsd auto trig params 1583 * @wmm_ac: WMM access category from 0 to 3 1584 * @user_priority: User priority to use in trigger frames 1585 * @service_interval: service interval 1586 * @suspend_interval: suspend interval 1587 * @delay_interval: delay interval 1588 */ 1589 struct sta_uapsd_params { 1590 uint32_t wmm_ac; 1591 uint32_t user_priority; 1592 uint32_t service_interval; 1593 uint32_t suspend_interval; 1594 uint32_t delay_interval; 1595 }; 1596 1597 /** 1598 * struct ta_uapsd_trig_params - uapsd trigger parameter 1599 * @vdevid: vdev id 1600 * @peer_addr: peer address 1601 * @auto_triggerparam: trigger parameters 1602 * @num_ac: no of access category 1603 */ 1604 struct sta_uapsd_trig_params { 1605 uint32_t vdevid; 1606 uint8_t peer_addr[IEEE80211_ADDR_LEN]; 1607 struct sta_uapsd_params *auto_triggerparam; 1608 uint32_t num_ac; 1609 }; 1610 #endif 1611 1612 #define WMI_NUM_AC (4) 1613 #define WMI_MAX_NUM_AC 4 1614 1615 1616 enum wmi_peer_rate_report_cond_phy_type { 1617 WMI_PEER_RATE_REPORT_COND_11B = 0, 1618 WMI_PEER_RATE_REPORT_COND_11A_G, 1619 WMI_PEER_RATE_REPORT_COND_11N, 1620 WMI_PEER_RATE_REPORT_COND_11AC, 1621 WMI_PEER_RATE_REPORT_COND_MAX_NUM 1622 }; 1623 1624 /** 1625 * struct report_rate_delta - peer specific parameters 1626 * @percent: percentage 1627 * @delta_min: rate min delta 1628 */ 1629 struct report_rate_delta { 1630 uint32_t percent; /* in unit of 12.5% */ 1631 uint32_t delta_min; /* in unit of Mbps */ 1632 }; 1633 1634 /** 1635 * struct report_rate_per_phy - per phy report parameters 1636 * @cond_flags: condition flag val 1637 * @delta: rate delta 1638 * @report_rate_threshold: rate threshold 1639 */ 1640 struct report_rate_per_phy { 1641 /* 1642 * PEER_RATE_REPORT_COND_FLAG_DELTA, 1643 * PEER_RATE_REPORT_COND_FLAG_THRESHOLD 1644 * Any of these two conditions or both of 1645 * them can be set. 1646 */ 1647 uint32_t cond_flags; 1648 struct report_rate_delta delta; 1649 /* 1650 * In unit of Mbps. There are at most 4 thresholds 1651 * If the threshold count is less than 4, set zero to 1652 * the one following the last threshold 1653 */ 1654 uint32_t report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH]; 1655 }; 1656 1657 /** 1658 * struct peer_rate_report_params - peer rate report parameters 1659 * @rate_report_enable: enable rate report param 1660 * @backoff_time: backoff time 1661 * @timer_period: timer 1662 * @report_per_phy: report per phy type 1663 */ 1664 struct wmi_peer_rate_report_params { 1665 uint32_t rate_report_enable; 1666 uint32_t backoff_time; /* in unit of msecond */ 1667 uint32_t timer_period; /* in unit of msecond */ 1668 /* 1669 *In the following field, the array index means the phy type, 1670 * please see enum wmi_peer_rate_report_cond_phy_type for detail 1671 */ 1672 struct report_rate_per_phy report_per_phy[ 1673 WMI_PEER_RATE_REPORT_COND_MAX_NUM]; 1674 1675 }; 1676 1677 /** 1678 * struct t_thermal_cmd_params - thermal command parameters 1679 * @min_temp: minimum temprature 1680 * @max_temp: maximum temprature 1681 * @thermal_enable: thermal enable 1682 */ 1683 struct thermal_cmd_params { 1684 uint16_t min_temp; 1685 uint16_t max_temp; 1686 uint8_t thermal_enable; 1687 }; 1688 1689 #define WMI_LRO_IPV4_SEED_ARR_SZ 5 1690 #define WMI_LRO_IPV6_SEED_ARR_SZ 11 1691 1692 /** 1693 * struct wmi_lro_config_cmd_t - set LRO init parameters 1694 * @lro_enable: indicates whether lro is enabled 1695 * @tcp_flag: If the TCP flags from the packet do not match 1696 * the values in this field after masking with TCP flags mask 1697 * below, packet is not LRO eligible 1698 * @tcp_flag_mask: field for comparing the TCP values provided 1699 * above with the TCP flags field in the received packet 1700 * @toeplitz_hash_ipv4: contains seed needed to compute the flow id 1701 * 5-tuple toeplitz hash for ipv4 packets 1702 * @toeplitz_hash_ipv6: contains seed needed to compute the flow id 1703 * 5-tuple toeplitz hash for ipv6 packets 1704 */ 1705 struct wmi_lro_config_cmd_t { 1706 uint32_t lro_enable; 1707 uint32_t tcp_flag:9, 1708 tcp_flag_mask:9; 1709 uint32_t toeplitz_hash_ipv4[WMI_LRO_IPV4_SEED_ARR_SZ]; 1710 uint32_t toeplitz_hash_ipv6[WMI_LRO_IPV6_SEED_ARR_SZ]; 1711 }; 1712 1713 /** 1714 * struct gtx_config_t - GTX config 1715 * @gtx_rt_mask: for HT and VHT rate masks 1716 * @gtx_usrcfg: host request for GTX mask 1717 * @gtx_threshold: PER Threshold (default: 10%) 1718 * @gtx_margin: PER margin (default: 2%) 1719 * @gtx_tcpstep: TCP step (default: 1) 1720 * @gtx_tpcMin: TCP min (default: 5) 1721 * @gtx_bwmask: BW mask (20/40/80/160 Mhz) 1722 */ 1723 struct wmi_gtx_config { 1724 uint32_t gtx_rt_mask[2]; 1725 uint32_t gtx_usrcfg; 1726 uint32_t gtx_threshold; 1727 uint32_t gtx_margin; 1728 uint32_t gtx_tpcstep; 1729 uint32_t gtx_tpcmin; 1730 uint32_t gtx_bwmask; 1731 }; 1732 1733 /** 1734 * struct wmi_probe_resp_params - send probe response parameters 1735 * @prb_rsp_template_frm: pointer to template probe response template 1736 * @prb_rsp_template_len: length of probe response template 1737 */ 1738 struct wmi_probe_resp_params { 1739 uint8_t *prb_rsp_template_frm; 1740 uint32_t prb_rsp_template_len; 1741 }; 1742 1743 /* struct set_key_params: structure containing 1744 * installation key parameters 1745 * @vdev_id: vdev id 1746 * @key_len: key length 1747 * @key_idx: key index 1748 * @peer_mac: peer mac address 1749 * @key_flags: key flags, 0:pairwise key, 1:group key, 2:static key 1750 * @key_cipher: key cipher based on security mode 1751 * @key_txmic_len: tx mic length 1752 * @key_rxmic_len: rx mic length 1753 * @key_tsc_counter: key tx sc counter 1754 * @key_rsc_counter: key rx sc counter 1755 * @rx_iv: receive IV, applicable only in case of WAPI 1756 * @tx_iv: transmit IV, applicable only in case of WAPI 1757 * @key_data: key data 1758 */ 1759 struct set_key_params { 1760 uint8_t vdev_id; 1761 uint16_t key_len; 1762 uint32_t key_idx; 1763 uint8_t peer_mac[IEEE80211_ADDR_LEN]; 1764 uint32_t key_flags; 1765 uint32_t key_cipher; 1766 uint32_t key_txmic_len; 1767 uint32_t key_rxmic_len; 1768 uint64_t key_tsc_counter; 1769 uint64_t *key_rsc_counter; 1770 #if defined(ATH_SUPPORT_WAPI) || defined(FEATURE_WLAN_WAPI) 1771 uint8_t rx_iv[16]; 1772 uint8_t tx_iv[16]; 1773 #endif 1774 uint8_t key_data[WMI_MAC_MAX_KEY_LENGTH]; 1775 }; 1776 1777 /** 1778 * struct sta_params - sta keep alive parameters 1779 * @vdev_id: vdev id 1780 * @method: keep alive method 1781 * @timeperiod: time to keep alive 1782 * @hostv4addr: host ipv4 address 1783 * @destv4addr: destination ipv4 address 1784 * @destmac: destination mac address 1785 */ 1786 struct sta_params { 1787 uint8_t vdev_id; 1788 uint32_t method; 1789 uint32_t timeperiod; 1790 uint8_t *hostv4addr; 1791 uint8_t *destv4addr; 1792 uint8_t *destmac; 1793 }; 1794 1795 /** 1796 * struct gateway_update_req_param - gateway parameter update request 1797 * @request_id: request id 1798 * @session_id: session id 1799 * @max_retries: Max ARP/NS retry attempts 1800 * @timeout: Retry interval 1801 * @ipv4_addr_type: on ipv4 network 1802 * @ipv6_addr_type: on ipv6 network 1803 * @gw_mac_addr: gateway mac addr 1804 * @ipv4_addr: ipv4 addr 1805 * @ipv6_addr: ipv6 addr 1806 */ 1807 struct gateway_update_req_param { 1808 uint32_t request_id; 1809 uint32_t session_id; 1810 uint32_t max_retries; 1811 uint32_t timeout; 1812 uint32_t ipv4_addr_type; 1813 uint32_t ipv6_addr_type; 1814 struct qdf_mac_addr gw_mac_addr; 1815 uint8_t ipv4_addr[QDF_IPV4_ADDR_SIZE]; 1816 uint8_t ipv6_addr[QDF_IPV6_ADDR_SIZE]; 1817 }; 1818 1819 /** 1820 * struct rssi_monitor_param - rssi monitoring 1821 * @request_id: request id 1822 * @session_id: session id 1823 * @min_rssi: minimum rssi 1824 * @max_rssi: maximum rssi 1825 * @control: flag to indicate start or stop 1826 */ 1827 struct rssi_monitor_param { 1828 uint32_t request_id; 1829 uint32_t session_id; 1830 int8_t min_rssi; 1831 int8_t max_rssi; 1832 bool control; 1833 }; 1834 1835 /** 1836 * struct scan_mac_oui - oui parameters 1837 * @oui: oui parameters 1838 * @vdev_id: interface id 1839 * @enb_probe_req_sno_randomization: control probe req sequence no randomization 1840 * @ie_whitelist: probe req IE whitelist attrs 1841 */ 1842 struct scan_mac_oui { 1843 uint8_t oui[WMI_WIFI_SCANNING_MAC_OUI_LENGTH]; 1844 uint32_t vdev_id; 1845 bool enb_probe_req_sno_randomization; 1846 struct probe_req_whitelist_attr ie_whitelist; 1847 }; 1848 1849 #define WMI_PASSPOINT_REALM_LEN 256 1850 #define WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM 16 1851 #define WMI_PASSPOINT_PLMN_LEN 3 1852 /** 1853 * struct wifi_passpoint_network_param - passpoint network block 1854 * @id: identifier of this network block 1855 * @realm: null terminated UTF8 encoded realm, 0 if unspecified 1856 * @roaming_consortium_ids: roaming consortium ids to match, 0s if unspecified 1857 * @plmn: mcc/mnc combination as per rules, 0s if unspecified 1858 */ 1859 struct wifi_passpoint_network_param { 1860 uint32_t id; 1861 uint8_t realm[WMI_PASSPOINT_REALM_LEN]; 1862 int64_t roaming_consortium_ids[WMI_PASSPOINT_ROAMING_CONSORTIUM_ID_NUM]; 1863 uint8_t plmn[WMI_PASSPOINT_PLMN_LEN]; 1864 }; 1865 1866 /** 1867 * struct wifi_passpoint_req_param - passpoint request 1868 * @request_id: request identifier 1869 * @vdev_id: vdev that is the target of the request 1870 * @num_networks: number of valid entries in @networks 1871 * @networks: passpoint networks 1872 */ 1873 struct wifi_passpoint_req_param { 1874 uint32_t request_id; 1875 uint32_t vdev_id; 1876 uint32_t num_networks; 1877 struct wifi_passpoint_network_param networks[]; 1878 }; 1879 1880 /* struct mobility_domain_info - structure containing 1881 * mobility domain info 1882 * @mdie_present: mobility domain present or not 1883 * @mobility_domain: mobility domain 1884 */ 1885 struct mobility_domain_info { 1886 uint8_t mdie_present; 1887 uint16_t mobility_domain; 1888 }; 1889 1890 #define WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET (16) 1891 1892 /* This TLV will be filled only in case roam offload 1893 * for wpa2-psk/pmkid/ese/11r is enabled */ 1894 typedef struct { 1895 /* 1896 * TLV tag and len; tag equals 1897 * WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param 1898 */ 1899 uint32_t tlv_header; 1900 uint32_t rssi_cat_gap; /* gap for every category bucket */ 1901 uint32_t prefer_5g; /* prefer select 5G candidate */ 1902 uint32_t select_5g_margin; 1903 uint32_t reassoc_failure_timeout; /* reassoc failure timeout */ 1904 uint32_t capability; 1905 uint32_t ht_caps_info; 1906 uint32_t ampdu_param; 1907 uint32_t ht_ext_cap; 1908 uint32_t ht_txbf; 1909 uint32_t asel_cap; 1910 uint32_t qos_enabled; 1911 uint32_t qos_caps; 1912 uint32_t wmm_caps; 1913 /* since this is 4 byte aligned, we don't declare it as tlv array */ 1914 uint32_t mcsset[WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET >> 2]; 1915 uint32_t ho_delay_for_rx; 1916 } roam_offload_param; 1917 1918 #define WMI_FILS_MAX_RRK_LENGTH 64 1919 #define WMI_FILS_MAX_RIK_LENGTH WMI_FILS_MAX_RRK_LENGTH 1920 #define WMI_FILS_MAX_REALM_LENGTH 256 1921 #define WMI_FILS_MAX_USERNAME_LENGTH 16 1922 1923 /** 1924 * struct roam_fils_params - Roam FILS params 1925 * @username: username 1926 * @username_length: username length 1927 * @next_erp_seq_num: next ERP sequence number 1928 * @rrk: RRK 1929 * @rrk_length: length of @rrk 1930 * @rik: RIK 1931 * @rik_length: length of @rik 1932 * @realm: realm 1933 * @realm_len: length of @realm 1934 */ 1935 struct roam_fils_params { 1936 uint8_t username[WMI_FILS_MAX_USERNAME_LENGTH]; 1937 uint32_t username_length; 1938 uint32_t next_erp_seq_num; 1939 uint8_t rrk[WMI_FILS_MAX_RRK_LENGTH]; 1940 uint32_t rrk_length; 1941 uint8_t rik[WMI_FILS_MAX_RIK_LENGTH]; 1942 uint32_t rik_length; 1943 uint8_t realm[WMI_FILS_MAX_REALM_LENGTH]; 1944 uint32_t realm_len; 1945 }; 1946 1947 /* struct roam_offload_scan_params - structure 1948 * containing roaming offload scan parameters 1949 * @is_roam_req_valid: flag to tell whether roam req 1950 * is valid or NULL 1951 * @mode: stores flags for scan 1952 * @vdev_id: vdev id 1953 * @roam_offload_enabled: flag for offload enable 1954 * @psk_pmk: pre shared key/pairwise master key 1955 * @pmk_len: length of PMK 1956 * @prefer_5ghz: prefer select 5G candidate 1957 * @roam_rssi_cat_gap: gap for every category bucket 1958 * @select_5ghz_margin: select 5 Ghz margin 1959 * @krk: KRK 1960 * @btk: BTK 1961 * @reassoc_failure_timeout: reassoc failure timeout 1962 * @rokh_id_length: r0kh id length 1963 * @rokh_id: r0kh id 1964 * @roam_key_mgmt_offload_enabled: roam offload flag 1965 * @auth_mode: authentication mode 1966 * @fw_okc: use OKC in firmware 1967 * @fw_pmksa_cache: use PMKSA cache in firmware 1968 * @is_ese_assoc: flag to determine ese assoc 1969 * @mdid: mobility domain info 1970 * @roam_offload_params: roam offload tlv params 1971 * @min_delay_btw_roam_scans: Delay btw two scans 1972 * @roam_trigger_reason_bitmask: Roam reason bitmark 1973 * @assoc_ie_length: Assoc IE length 1974 * @assoc_ie: Assoc IE buffer 1975 * @add_fils_tlv: add FILS TLV boolean 1976 * @roam_fils_params: roam fils params 1977 */ 1978 struct roam_offload_scan_params { 1979 uint8_t is_roam_req_valid; 1980 uint32_t mode; 1981 uint32_t vdev_id; 1982 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 1983 uint8_t roam_offload_enabled; 1984 uint8_t psk_pmk[WMI_ROAM_SCAN_PSK_SIZE]; 1985 uint32_t pmk_len; 1986 uint8_t prefer_5ghz; 1987 uint8_t roam_rssi_cat_gap; 1988 uint8_t select_5ghz_margin; 1989 uint8_t krk[WMI_KRK_KEY_LEN]; 1990 uint8_t btk[WMI_BTK_KEY_LEN]; 1991 uint32_t reassoc_failure_timeout; 1992 uint32_t rokh_id_length; 1993 uint8_t rokh_id[WMI_ROAM_R0KH_ID_MAX_LEN]; 1994 uint8_t roam_key_mgmt_offload_enabled; 1995 int auth_mode; 1996 bool fw_okc; 1997 bool fw_pmksa_cache; 1998 #endif 1999 uint32_t min_delay_btw_roam_scans; 2000 uint32_t roam_trigger_reason_bitmask; 2001 bool is_ese_assoc; 2002 bool is_11r_assoc; 2003 struct mobility_domain_info mdid; 2004 #ifdef CONFIG_MCL 2005 /* THis is not available in non tlv target. 2006 * please remove this and replace with a host based 2007 * structure */ 2008 roam_offload_param roam_offload_params; 2009 #endif 2010 uint32_t assoc_ie_length; 2011 uint8_t assoc_ie[MAX_ASSOC_IE_LENGTH]; 2012 bool add_fils_tlv; 2013 #ifdef WLAN_FEATURE_FILS_SK 2014 struct roam_fils_params roam_fils_params; 2015 #endif 2016 }; 2017 2018 /* struct roam_offload_scan_rssi_params - structure containing 2019 * parameters for roam offload scan based on RSSI 2020 * @rssi_thresh: rssi threshold 2021 * @rssi_thresh_diff: difference in rssi threshold 2022 * @hi_rssi_scan_max_count: 5G scan max count 2023 * @hi_rssi_scan_rssi_delta: 5G scan rssi change threshold value 2024 * @hi_rssi_scan_rssi_ub: 5G scan upper bound 2025 * @raise_rssi_thresh_5g: flag to determine penalty and boost thresholds 2026 * @session_id: vdev id 2027 * @penalty_threshold_5g: RSSI threshold below which 5GHz RSSI is penalized 2028 * @boost_threshold_5g: RSSI threshold above which 5GHz RSSI is favored 2029 * @raise_factor_5g: factor by which 5GHz RSSI is boosted 2030 * @drop_factor_5g: factor by which 5GHz RSSI is penalized 2031 * @max_raise_rssi_5g: maximum boost that can be applied to a 5GHz RSSI 2032 * @max_drop_rssi_5g: maximum penalty that can be applied to a 5GHz RSSI 2033 * @good_rssi_threshold: RSSI below which roam is kicked in by background 2034 * scan although rssi is still good 2035 * @roam_earlystop_thres_min: Minimum RSSI threshold value for early stop, 2036 * unit is dB above NF 2037 * @roam_earlystop_thres_max: Maximum RSSI threshold value for early stop, 2038 * unit is dB above NF 2039 * @dense_rssi_thresh_offset: dense roam RSSI threshold difference 2040 * @dense_min_aps_cnt: dense roam minimum APs 2041 * @initial_dense_status: dense status detected by host 2042 * @traffic_threshold: dense roam RSSI threshold 2043 * @bg_scan_bad_rssi_thresh: Bad RSSI threshold to perform bg scan 2044 * @roam_bad_rssi_thresh_offset_2g: Offset from Bad RSSI threshold for 2G to 5G Roam 2045 * @bg_scan_client_bitmap: Bitmap used to identify the client scans to snoop 2046 * @flags: Flags for Background Roaming 2047 * Bit 0 : BG roaming enabled when we connect to 2G AP only and roaming to 5G AP only. 2048 * Bit 1-31: Reserved 2049 */ 2050 struct roam_offload_scan_rssi_params { 2051 int8_t rssi_thresh; 2052 uint8_t rssi_thresh_diff; 2053 uint32_t hi_rssi_scan_max_count; 2054 uint32_t hi_rssi_scan_rssi_delta; 2055 int32_t hi_rssi_scan_rssi_ub; 2056 int raise_rssi_thresh_5g; 2057 uint8_t session_id; 2058 uint32_t penalty_threshold_5g; 2059 uint32_t boost_threshold_5g; 2060 uint8_t raise_factor_5g; 2061 uint8_t drop_factor_5g; 2062 int max_raise_rssi_5g; 2063 int max_drop_rssi_5g; 2064 uint32_t good_rssi_threshold; 2065 uint32_t roam_earlystop_thres_min; 2066 uint32_t roam_earlystop_thres_max; 2067 int dense_rssi_thresh_offset; 2068 int dense_min_aps_cnt; 2069 int initial_dense_status; 2070 int traffic_threshold; 2071 int32_t rssi_thresh_offset_5g; 2072 int8_t bg_scan_bad_rssi_thresh; 2073 uint8_t roam_bad_rssi_thresh_offset_2g; 2074 uint32_t bg_scan_client_bitmap; 2075 uint32_t flags; 2076 }; 2077 2078 /** 2079 * struct ap_profile - Structure ap profile to match candidate 2080 * @flags: flags 2081 * @rssi_threshold: the value of the the candidate AP should higher by this 2082 * threshold than the rssi of the currrently associated AP 2083 * @ssid: ssid vlaue to be matched 2084 * @rsn_authmode: security params to be matched 2085 * @rsn_ucastcipherset: unicast cipher set 2086 * @rsn_mcastcipherset: mcast/group cipher set 2087 * @rsn_mcastmgmtcipherset: mcast/group management frames cipher set 2088 * @rssi_abs_thresh: the value of the candidate AP should higher than this 2089 * absolute RSSI threshold. Zero means no absolute minimum 2090 * RSSI is required. units are the offset from the noise 2091 * floor in dB 2092 */ 2093 struct ap_profile { 2094 uint32_t flags; 2095 uint32_t rssi_threshold; 2096 struct mac_ssid ssid; 2097 uint32_t rsn_authmode; 2098 uint32_t rsn_ucastcipherset; 2099 uint32_t rsn_mcastcipherset; 2100 uint32_t rsn_mcastmgmtcipherset; 2101 uint32_t rssi_abs_thresh; 2102 }; 2103 2104 /** 2105 * struct rssi_scoring - rssi scoring param to sortlist selected AP 2106 * @best_rssi_threshold: Roamable AP RSSI equal or better than this threshold, 2107 * full rssi score 100. Units in dBm. 2108 * @good_rssi_threshold: Below threshold, scoring linear percentage between 2109 * rssi_good_pnt and 100. Units in dBm. 2110 * @bad_rssi_threshold: Between good and bad rssi threshold, scoring linear 2111 * % between rssi_bad_pcnt and rssi_good_pct in dBm. 2112 * @good_rssi_pcnt: Used to assigned scoring percentage of each slot between 2113 * best to good rssi threshold. Units in percentage. 2114 * @bad_rssi_pcnt: Used to assigned scoring percentage of each slot between good 2115 * to bad rssi threshold. Unites in percentage. 2116 * @good_bucket_size : bucket size of slot in good zone 2117 * @bad_bucket_size : bucket size of slot in bad zone 2118 * @rssi_pref_5g_rssi_thresh: Below rssi threshold, 5G AP have given preference 2119 * of band percentage. Units in dBm. 2120 */ 2121 struct rssi_scoring { 2122 int32_t best_rssi_threshold; 2123 int32_t good_rssi_threshold; 2124 int32_t bad_rssi_threshold; 2125 uint32_t good_rssi_pcnt; 2126 uint32_t bad_rssi_pcnt; 2127 uint32_t good_bucket_size; 2128 uint32_t bad_bucket_size; 2129 int32_t rssi_pref_5g_rssi_thresh; 2130 }; 2131 2132 /** 2133 * struct param_slot_scoring - define % score for differents slots for a 2134 * scoring param. 2135 * @num_slot: number of slots in which the param will be divided. 2136 * Max 15. index 0 is used for 'not_present. Num_slot will 2137 * equally divide 100. e.g, if num_slot = 4 slot 0 = 0-25%, slot 2138 * 1 = 26-50% slot 2 = 51-75%, slot 3 = 76-100% 2139 * @score_pcnt3_to_0: Conatins score percentage for slot 0-3 2140 * BITS 0-7 :- the scoring pcnt when not present 2141 * BITS 8-15 :- SLOT_1 2142 * BITS 16-23 :- SLOT_2 2143 * BITS 24-31 :- SLOT_3 2144 * @score_pcnt7_to_4: Conatins score percentage for slot 4-7 2145 * BITS 0-7 :- SLOT_4 2146 * BITS 8-15 :- SLOT_5 2147 * BITS 16-23 :- SLOT_6 2148 * BITS 24-31 :- SLOT_7 2149 * @score_pcnt11_to_8: Conatins score percentage for slot 8-11 2150 * BITS 0-7 :- SLOT_8 2151 * BITS 8-15 :- SLOT_9 2152 * BITS 16-23 :- SLOT_10 2153 * BITS 24-31 :- SLOT_11 2154 * @score_pcnt15_to_12: Conatins score percentage for slot 12-15 2155 * BITS 0-7 :- SLOT_12 2156 * BITS 8-15 :- SLOT_13 2157 * BITS 16-23 :- SLOT_14 2158 * BITS 24-31 :- SLOT_15 2159 */ 2160 struct param_slot_scoring { 2161 uint32_t num_slot; 2162 uint32_t score_pcnt3_to_0; 2163 uint32_t score_pcnt7_to_4; 2164 uint32_t score_pcnt11_to_8; 2165 uint32_t score_pcnt15_to_12; 2166 }; 2167 2168 /** 2169 * struct scoring_param - scoring param to sortlist selected AP 2170 * @disable_bitmap: Each bit will be either allow(0)/disallow(1) to 2171 * considered the roam score param. 2172 * @rssi_weightage: RSSI weightage out of total score in % 2173 * @ht_weightage: HT weightage out of total score in %. 2174 * @vht_weightage: VHT weightage out of total score in %. 2175 * @he_weightaget: 11ax weightage out of total score in %. 2176 * @bw_weightage: Bandwidth weightage out of total score in %. 2177 * @band_weightage: Band(2G/5G) weightage out of total score in %. 2178 * @nss_weightage: NSS(1x1 / 2x2)weightage out of total score in %. 2179 * @esp_qbss_weightage: ESP/QBSS weightage out of total score in %. 2180 * @beamforming_weightage: Beamforming weightage out of total score in %. 2181 * @pcl_weightage: PCL weightage out of total score in %. 2182 * @oce_wan_weightage OCE WAN metrics weightage out of total score in %. 2183 * @bw_index_score: channel BW scoring percentage information. 2184 * BITS 0-7 :- It contains scoring percentage of 20MHz BW 2185 * BITS 8-15 :- It contains scoring percentage of 40MHz BW 2186 * BITS 16-23 :- It contains scoring percentage of 80MHz BW 2187 * BITS 24-31 :- It contains scoring percentage of 1600MHz BW 2188 * The value of each index must be 0-100 2189 * @band_index_score: band scording percentage information. 2190 * BITS 0-7 :- It contains scoring percentage of 2G 2191 * BITS 8-15 :- It contains scoring percentage of 5G 2192 * BITS 16-23 :- reserved 2193 * BITS 24-31 :- reserved 2194 * The value of each index must be 0-100 2195 * @nss_index_score: NSS scoring percentage information. 2196 * BITS 0-7 :- It contains scoring percentage of 1x1 2197 * BITS 8-15 :- It contains scoring percentage of 2x2 2198 * BITS 16-23 :- It contains scoring percentage of 3x3 2199 * BITS 24-31 :- It contains scoring percentage of 4x4 2200 * The value of each index must be 0-100 2201 * @rssi_scoring: RSSI scoring information. 2202 * @esp_qbss_scoring: ESP/QBSS scoring percentage information 2203 * @oce_wan_scoring: OCE WAN metrics percentage information 2204 */ 2205 struct scoring_param { 2206 uint32_t disable_bitmap; 2207 int32_t rssi_weightage; 2208 int32_t ht_weightage; 2209 int32_t vht_weightage; 2210 int32_t he_weightage; 2211 int32_t bw_weightage; 2212 int32_t band_weightage; 2213 int32_t nss_weightage; 2214 int32_t esp_qbss_weightage; 2215 int32_t beamforming_weightage; 2216 int32_t pcl_weightage; 2217 int32_t oce_wan_weightage; 2218 uint32_t bw_index_score; 2219 uint32_t band_index_score; 2220 uint32_t nss_index_score; 2221 struct rssi_scoring rssi_scoring; 2222 struct param_slot_scoring esp_qbss_scoring; 2223 struct param_slot_scoring oce_wan_scoring; 2224 }; 2225 2226 /** 2227 * struct ap_profile_params - ap profile params 2228 * @vdev_id: vdev id 2229 * @profile: ap profile to match candidate 2230 * @param: scoring params to short candidate 2231 */ 2232 struct ap_profile_params { 2233 uint8_t vdev_id; 2234 struct ap_profile profile; 2235 struct scoring_param param; 2236 }; 2237 2238 /** 2239 * struct wifi_epno_network - enhanced pno network block 2240 * @ssid: ssid 2241 * @rssi_threshold: threshold for considering this SSID as found, required 2242 * granularity for this threshold is 4dBm to 8dBm 2243 * @flags: WIFI_PNO_FLAG_XXX 2244 * @auth_bit_field: auth bit field for matching WPA IE 2245 */ 2246 struct wifi_epno_network_params { 2247 struct mac_ssid ssid; 2248 int8_t rssi_threshold; 2249 uint8_t flags; 2250 uint8_t auth_bit_field; 2251 }; 2252 2253 /** 2254 * struct wifi_enhanced_pno_params - enhanced pno network params 2255 * @request_id: request id number 2256 * @vdev_id: vdev id 2257 * @min_5ghz_rssi: minimum 5GHz RSSI for a BSSID to be considered 2258 * @min_24ghz_rssi: minimum 2.4GHz RSSI for a BSSID to be considered 2259 * @initial_score_max: maximum score that a network can have before bonuses 2260 * @current_connection_bonus: only report when there is a network's score this 2261 * much higher than the current connection 2262 * @same_network_bonus: score bonus for all n/w with the same network flag 2263 * @secure_bonus: score bonus for networks that are not open 2264 * @band_5ghz_bonus: 5GHz RSSI score bonus (applied to all 5GHz networks) 2265 * @num_networks: number of ssids 2266 * @networks: EPNO networks 2267 */ 2268 struct wifi_enhanced_pno_params { 2269 uint32_t request_id; 2270 uint32_t vdev_id; 2271 uint32_t min_5ghz_rssi; 2272 uint32_t min_24ghz_rssi; 2273 uint32_t initial_score_max; 2274 uint32_t current_connection_bonus; 2275 uint32_t same_network_bonus; 2276 uint32_t secure_bonus; 2277 uint32_t band_5ghz_bonus; 2278 uint32_t num_networks; 2279 struct wifi_epno_network_params networks[]; 2280 }; 2281 2282 enum { 2283 WMI_AP_RX_DATA_OFFLOAD = 0x00, 2284 WMI_STA_RX_DATA_OFFLOAD = 0x01, 2285 }; 2286 2287 /** 2288 * enum extscan_configuration_flags - extscan config flags 2289 * @WMI_EXTSCAN_LP_EXTENDED_BATCHING: extended batching 2290 */ 2291 enum wmi_extscan_configuration_flags { 2292 WMI_EXTSCAN_LP_EXTENDED_BATCHING = 0x00000001, 2293 }; 2294 2295 /** 2296 * enum extscan_report_events_type - extscan report events type 2297 * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full 2298 * @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan 2299 * @EXTSCAN_REPORT_EVENTS_FULL_RESULTS: forward scan results 2300 * (beacons/probe responses + IEs) 2301 * in real time to HAL, in addition to completion events. 2302 * Note: To keep backward compatibility, 2303 * fire completion events regardless of REPORT_EVENTS_EACH_SCAN. 2304 * @EXTSCAN_REPORT_EVENTS_NO_BATCH: controls batching, 2305 * 0 => batching, 1 => no batching 2306 */ 2307 enum wmi_extscan_report_events_type { 2308 WMI_EXTSCAN_REPORT_EVENTS_BUFFER_FULL = 0x00, 2309 WMI_EXTSCAN_REPORT_EVENTS_EACH_SCAN = 0x01, 2310 WMI_EXTSCAN_REPORT_EVENTS_FULL_RESULTS = 0x02, 2311 WMI_EXTSCAN_REPORT_EVENTS_NO_BATCH = 0x04, 2312 }; 2313 2314 /** 2315 * struct extscan_capabilities_params - ext scan capablities 2316 * @request_id: request_id 2317 * @vdev_id: vdev id 2318 */ 2319 struct extscan_capabilities_params { 2320 uint32_t request_id; 2321 uint8_t vdev_id; 2322 }; 2323 2324 /** 2325 * struct extscan_capabilities_reset_params - ext scan capablities reset 2326 * parameter 2327 * @request_id: request_id 2328 * @vdev_id: vdev id 2329 */ 2330 struct extscan_capabilities_reset_params { 2331 uint32_t request_id; 2332 uint8_t vdev_id; 2333 }; 2334 2335 /** 2336 * struct extscan_bssid_hotlist_reset_params - ext scan hotlist reset parameter 2337 * @request_id: request_id 2338 * @vdev_id: vdev id 2339 */ 2340 struct extscan_bssid_hotlist_reset_params { 2341 uint32_t request_id; 2342 uint8_t vdev_id; 2343 }; 2344 2345 /** 2346 * struct extscan_stop_req_params - ext scan stop parameter 2347 * @request_id: request_id 2348 * @vdev_id: vdev id 2349 */ 2350 struct extscan_stop_req_params { 2351 uint32_t request_id; 2352 uint8_t vdev_id; 2353 }; 2354 2355 /** 2356 * struct ap_threshold_params - ap threshold parameter 2357 * @bssid: mac address 2358 * @low: low threshold 2359 * @high: high threshold 2360 */ 2361 struct ap_threshold_params { 2362 struct qdf_mac_addr bssid; 2363 int32_t low; 2364 int32_t high; 2365 }; 2366 2367 /** 2368 * struct extscan_set_sig_changereq_params - ext scan channel parameter 2369 * @request_id: request_id 2370 * @vdev_id: vdev id 2371 * @rssi_sample_size: Number of samples for averaging RSSI 2372 * @lostap_sample_size: Number of missed samples to confirm AP loss 2373 * @min_breaching: Number of APs breaching threshold required for firmware 2374 * @num_ap: no of scanned ap 2375 * @ap: ap threshold parameter 2376 */ 2377 struct extscan_set_sig_changereq_params { 2378 uint32_t request_id; 2379 uint8_t vdev_id; 2380 uint32_t rssi_sample_size; 2381 uint32_t lostap_sample_size; 2382 uint32_t min_breaching; 2383 uint32_t num_ap; 2384 struct ap_threshold_params ap[WMI_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS]; 2385 }; 2386 2387 /** 2388 * struct extscan_cached_result_params - ext scan cached parameter 2389 * @request_id: request_id 2390 * @vdev_id: vdev id 2391 * @flush: cached results flush 2392 */ 2393 struct extscan_cached_result_params { 2394 uint32_t request_id; 2395 uint8_t vdev_id; 2396 bool flush; 2397 }; 2398 2399 #define WMI_WLAN_EXTSCAN_MAX_CHANNELS 36 2400 #define WMI_WLAN_EXTSCAN_MAX_BUCKETS 16 2401 #define WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS 128 2402 #define WMI_WLAN_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS 64 2403 #define WMI_EXTSCAN_MAX_HOTLIST_SSIDS 8 2404 2405 /** 2406 * struct wifi_scan_channelspec_params - wifi scan channel parameter 2407 * @channel: Frequency in MHz 2408 * @dwell_time_ms: dwell time in milliseconds 2409 * @passive: passive scan 2410 * @channel_class: channel class 2411 */ 2412 struct wifi_scan_channelspec_params { 2413 uint32_t channel; 2414 uint32_t dwell_time_ms; 2415 bool passive; 2416 uint8_t channel_class; 2417 }; 2418 2419 /** 2420 * enum wmi_wifi_band - wifi band 2421 * @WMI_WIFI_BAND_UNSPECIFIED: unspecified band 2422 * @WMI_WIFI_BAND_BG: 2.4 GHz 2423 * @WMI_WIFI_BAND_A: 5 GHz without DFS 2424 * @WMI_WIFI_BAND_ABG: 2.4 GHz + 5 GHz; no DFS 2425 * @WMI_WIFI_BAND_A_DFS_ONLY: 5 GHz DFS only 2426 * @WMI_WIFI_BAND_A_WITH_DFS: 5 GHz with DFS 2427 * @WMI_WIFI_BAND_ABG_WITH_DFS: 2.4 GHz + 5 GHz with DFS 2428 * @WMI_WIFI_BAND_MAX: max range 2429 */ 2430 enum wmi_wifi_band { 2431 WMI_WIFI_BAND_UNSPECIFIED, 2432 WMI_WIFI_BAND_BG = 1, 2433 WMI_WIFI_BAND_A = 2, 2434 WMI_WIFI_BAND_ABG = 3, 2435 WMI_WIFI_BAND_A_DFS_ONLY = 4, 2436 /* 5 is reserved */ 2437 WMI_WIFI_BAND_A_WITH_DFS = 6, 2438 WMI_WIFI_BAND_ABG_WITH_DFS = 7, 2439 /* Keep it last */ 2440 WMI_WIFI_BAND_MAX 2441 }; 2442 2443 /** 2444 * struct wifi_scan_bucket_params - wifi scan bucket spec 2445 * @bucket: bucket identifier 2446 * @band: wifi band 2447 * @period: Desired period, in millisecond; if this is too 2448 * low, the firmware should choose to generate results as fast as 2449 * it can instead of failing the command byte 2450 * for exponential backoff bucket this is the min_period 2451 * @report_events: 0 => normal reporting (reporting rssi history 2452 * only, when rssi history buffer is % full) 2453 * 1 => same as 0 + report a scan completion event after scanning 2454 * this bucket 2455 * 2 => same as 1 + forward scan results 2456 * (beacons/probe responses + IEs) in real time to HAL 2457 * @max_period: if max_period is non zero or different than period, 2458 * then this bucket is an exponential backoff bucket and 2459 * the scan period will grow exponentially as per formula: 2460 * actual_period(N) = period ^ (N/(step_count+1)) to a 2461 * maximum period of max_period 2462 * @exponent: for exponential back off bucket: multiplier: 2463 * new_period = old_period * exponent 2464 * @step_count: for exponential back off bucket, number of scans performed 2465 * at a given period and until the exponent is applied 2466 * @num_channels: channels to scan; these may include DFS channels 2467 * Note that a given channel may appear in multiple buckets 2468 * @min_dwell_time_active: per bucket minimum active dwell time 2469 * @max_dwell_time_active: per bucket maximum active dwell time 2470 * @min_dwell_time_passive: per bucket minimum passive dwell time 2471 * @max_dwell_time_passive: per bucket maximum passive dwell time 2472 * @channels: Channel list 2473 */ 2474 struct wifi_scan_bucket_params { 2475 uint8_t bucket; 2476 enum wmi_wifi_band band; 2477 uint32_t period; 2478 uint32_t report_events; 2479 uint32_t max_period; 2480 uint32_t exponent; 2481 uint32_t step_count; 2482 uint32_t num_channels; 2483 uint32_t min_dwell_time_active; 2484 uint32_t max_dwell_time_active; 2485 uint32_t min_dwell_time_passive; 2486 uint32_t max_dwell_time_passive; 2487 struct wifi_scan_channelspec_params 2488 channels[WMI_WLAN_EXTSCAN_MAX_CHANNELS]; 2489 }; 2490 2491 /** 2492 * struct wifi_scan_cmd_req_params - wifi scan command request params 2493 * @base_period: base timer period 2494 * @max_ap_per_scan: max ap per scan 2495 * @report_threshold_percent: report threshold 2496 * in %, when buffer is this much full, wake up host 2497 * @report_threshold_num_scans: report threshold number of scans 2498 * in number of scans, wake up host after these many scans 2499 * @request_id: request id 2500 * @vdev_id: vdev that is the target of the request 2501 * @num_buckets: number of buckets 2502 * @min_dwell_time_active: per bucket minimum active dwell time 2503 * @max_dwell_time_active: per bucket maximum active dwell time 2504 * @min_dwell_time_passive: per bucket minimum passive dwell time 2505 * @max_dwell_time_passive: per bucket maximum passive dwell time 2506 * @configuration_flags: configuration flags 2507 * @extscan_adaptive_dwell_mode: adaptive dwelltime mode for extscan 2508 * @buckets: buckets array 2509 */ 2510 struct wifi_scan_cmd_req_params { 2511 uint32_t base_period; 2512 uint32_t max_ap_per_scan; 2513 uint32_t report_threshold_percent; 2514 uint32_t report_threshold_num_scans; 2515 uint32_t request_id; 2516 uint8_t vdev_id; 2517 uint32_t num_buckets; 2518 uint32_t min_dwell_time_active; 2519 uint32_t max_dwell_time_active; 2520 uint32_t min_dwell_time_passive; 2521 uint32_t max_dwell_time_passive; 2522 uint32_t configuration_flags; 2523 enum scan_dwelltime_adaptive_mode extscan_adaptive_dwell_mode; 2524 struct wifi_scan_bucket_params buckets[WMI_WLAN_EXTSCAN_MAX_BUCKETS]; 2525 }; 2526 2527 #define WMI_CFG_VALID_CHANNEL_LIST_LEN 100 2528 /* Occupied channel list remains static */ 2529 #define WMI_CHANNEL_LIST_STATIC 1 2530 /* Occupied channel list can be learnt after init */ 2531 #define WMI_CHANNEL_LIST_DYNAMIC_INIT 2 2532 /* Occupied channel list can be learnt after flush */ 2533 #define WMI_CHANNEL_LIST_DYNAMIC_FLUSH 3 2534 /* Occupied channel list can be learnt after update */ 2535 #define WMI_CHANNEL_LIST_DYNAMIC_UPDATE 4 2536 2537 /** 2538 * struct plm_req_params - plm req parameter 2539 * @diag_token: Dialog token 2540 * @meas_token: measurement token 2541 * @num_bursts: total number of bursts 2542 * @burst_int: burst interval in seconds 2543 * @meas_duration:in TU's,STA goes off-ch 2544 * @burst_len: no of times the STA should cycle through PLM ch list 2545 * @desired_tx_pwr: desired tx power 2546 * @mac_addr: MC dest addr 2547 * @plm_num_ch: channel numbers 2548 * @plm_ch_list: channel list 2549 * @session_id: session id 2550 * @enable: enable/disable 2551 */ 2552 struct plm_req_params { 2553 uint16_t diag_token; 2554 uint16_t meas_token; 2555 uint16_t num_bursts; 2556 uint16_t burst_int; 2557 uint16_t meas_duration; 2558 /* no of times the STA should cycle through PLM ch list */ 2559 uint8_t burst_len; 2560 int8_t desired_tx_pwr; 2561 struct qdf_mac_addr mac_addr; 2562 /* no of channels */ 2563 uint8_t plm_num_ch; 2564 /* channel numbers */ 2565 uint8_t plm_ch_list[WMI_CFG_VALID_CHANNEL_LIST_LEN]; 2566 uint8_t session_id; 2567 bool enable; 2568 }; 2569 2570 #define MAX_SSID_ALLOWED_LIST 4 2571 #define MAX_BSSID_AVOID_LIST 16 2572 #define MAX_BSSID_FAVORED 16 2573 #define MAX_RSSI_AVOID_BSSID_LIST 10 2574 2575 /** 2576 * struct mac_ts_info_tfc - mac ts info parameters 2577 * @burstSizeDefn: burst size 2578 * @reserved: reserved 2579 * @ackPolicy: ack policy 2580 * @psb: psb 2581 * @aggregation: aggregation 2582 * @accessPolicy: access policy 2583 * @direction: direction 2584 * @tsid: direction 2585 * @trafficType: traffic type 2586 */ 2587 struct mac_ts_info_tfc { 2588 #ifndef ANI_LITTLE_BIT_ENDIAN 2589 uint8_t burstSizeDefn:1; 2590 uint8_t reserved:7; 2591 #else 2592 uint8_t reserved:7; 2593 uint8_t burstSizeDefn:1; 2594 #endif 2595 2596 #ifndef ANI_LITTLE_BIT_ENDIAN 2597 uint16_t ackPolicy:2; 2598 uint16_t userPrio:3; 2599 uint16_t psb:1; 2600 uint16_t aggregation:1; 2601 uint16_t accessPolicy:2; 2602 uint16_t direction:2; 2603 uint16_t tsid:4; 2604 uint16_t trafficType:1; 2605 #else 2606 uint16_t trafficType:1; 2607 uint16_t tsid:4; 2608 uint16_t direction:2; 2609 uint16_t accessPolicy:2; 2610 uint16_t aggregation:1; 2611 uint16_t psb:1; 2612 uint16_t userPrio:3; 2613 uint16_t ackPolicy:2; 2614 #endif 2615 } qdf_packed; 2616 2617 /** 2618 * struct mac_ts_info_sch - mac ts info schedule parameters 2619 * @rsvd: reserved 2620 * @schedule: schedule bit 2621 */ 2622 struct mac_ts_info_sch { 2623 #ifndef ANI_LITTLE_BIT_ENDIAN 2624 uint8_t rsvd:7; 2625 uint8_t schedule:1; 2626 #else 2627 uint8_t schedule:1; 2628 uint8_t rsvd:7; 2629 #endif 2630 } qdf_packed; 2631 2632 /** 2633 * struct mac_ts_info_sch - mac ts info schedule parameters 2634 * @traffic: mac tfc parameter 2635 * @schedule: mac schedule parameters 2636 */ 2637 struct mac_ts_info { 2638 struct mac_ts_info_tfc traffic; 2639 struct mac_ts_info_sch schedule; 2640 } qdf_packed; 2641 2642 /** 2643 * struct mac_tspec_ie - mac ts spec 2644 * @type: type 2645 * @length: length 2646 * @tsinfo: tsinfo 2647 * @nomMsduSz: nomMsduSz 2648 * @maxMsduSz: maxMsduSz 2649 * @minSvcInterval: minSvcInterval 2650 * @maxSvcInterval: maxSvcInterval 2651 * @inactInterval: inactInterval 2652 * @suspendInterval: suspendInterval 2653 * @svcStartTime: svcStartTime 2654 * @minDataRate: minDataRate 2655 * @meanDataRate: meanDataRate 2656 * @peakDataRate: peakDataRate 2657 * @maxBurstSz: maxBurstSz 2658 * @delayBound: delayBound 2659 * @minPhyRate: minPhyRate 2660 * @surplusBw: surplusBw 2661 * @mediumTime: mediumTime 2662 */ 2663 struct mac_tspec_ie { 2664 uint8_t type; 2665 uint8_t length; 2666 struct mac_ts_info tsinfo; 2667 uint16_t nomMsduSz; 2668 uint16_t maxMsduSz; 2669 uint32_t minSvcInterval; 2670 uint32_t maxSvcInterval; 2671 uint32_t inactInterval; 2672 uint32_t suspendInterval; 2673 uint32_t svcStartTime; 2674 uint32_t minDataRate; 2675 uint32_t meanDataRate; 2676 uint32_t peakDataRate; 2677 uint32_t maxBurstSz; 2678 uint32_t delayBound; 2679 uint32_t minPhyRate; 2680 uint16_t surplusBw; 2681 uint16_t mediumTime; 2682 } qdf_packed; 2683 2684 /** 2685 * struct add_ts_param - ADDTS related parameters 2686 * @staIdx: station index 2687 * @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS 2688 * @tspec: tspec value 2689 * @status: CDF status 2690 * @sessionId: session id 2691 * @tsm_interval: TSM interval period passed from UMAC to WMI 2692 * @setRICparams: RIC parameters 2693 * @sme_session_id: sme session id 2694 */ 2695 struct add_ts_param { 2696 uint16_t staIdx; 2697 uint16_t tspecIdx; 2698 struct mac_tspec_ie tspec; 2699 QDF_STATUS status; 2700 uint8_t sessionId; 2701 #ifdef FEATURE_WLAN_ESE 2702 uint16_t tsm_interval; 2703 #endif /* FEATURE_WLAN_ESE */ 2704 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 2705 uint8_t setRICparams; 2706 #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ 2707 uint8_t sme_session_id; 2708 }; 2709 2710 /** 2711 * struct delts_req_info - DELTS request parameter 2712 * @tsinfo: ts info 2713 * @tspec: ts spec 2714 * @wmeTspecPresent: wme ts spec flag 2715 * @wsmTspecPresent: wsm ts spec flag 2716 * @lleTspecPresent: lle ts spec flag 2717 */ 2718 struct delts_req_info { 2719 struct mac_ts_info tsinfo; 2720 struct mac_tspec_ie tspec; 2721 uint8_t wmeTspecPresent:1; 2722 uint8_t wsmTspecPresent:1; 2723 uint8_t lleTspecPresent:1; 2724 }; 2725 2726 /** 2727 * struct del_ts_params - DELTS related parameters 2728 * @staIdx: station index 2729 * @tspecIdx: TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS 2730 * @bssId: BSSID 2731 * @sessionId: session id 2732 * @userPrio: user priority 2733 * @delTsInfo: DELTS info 2734 * @setRICparams: RIC parameters 2735 */ 2736 struct del_ts_params { 2737 uint16_t staIdx; 2738 uint16_t tspecIdx; 2739 uint8_t bssId[IEEE80211_ADDR_LEN]; 2740 uint8_t sessionId; 2741 uint8_t userPrio; 2742 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 2743 struct delts_req_info delTsInfo; 2744 uint8_t setRICparams; 2745 #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ 2746 }; 2747 2748 /** 2749 * struct ll_stats_clear_params - ll stats clear parameter 2750 * @req_id: request id 2751 * @sta_id: sta id 2752 * @stats_clear_mask: stats clear mask 2753 * @stop_req: stop request 2754 */ 2755 struct ll_stats_clear_params { 2756 uint32_t req_id; 2757 uint8_t sta_id; 2758 uint32_t stats_clear_mask; 2759 uint8_t stop_req; 2760 }; 2761 2762 /** 2763 * struct ll_stats_set_params - ll stats get parameter 2764 * @req_id: request id 2765 * @sta_id: sta id 2766 * @mpdu_size_threshold: mpdu sixe threshold 2767 * @aggressive_statistics_gathering: aggressive_statistics_gathering 2768 */ 2769 struct ll_stats_set_params { 2770 uint32_t req_id; 2771 uint8_t sta_id; 2772 uint32_t mpdu_size_threshold; 2773 uint32_t aggressive_statistics_gathering; 2774 }; 2775 2776 /** 2777 * struct ll_stats_get_params - ll stats parameter 2778 * @req_id: request id 2779 * @sta_id: sta id 2780 * @param_id_mask: param is mask 2781 */ 2782 struct ll_stats_get_params { 2783 uint32_t req_id; 2784 uint8_t sta_id; 2785 uint32_t param_id_mask; 2786 }; 2787 2788 2789 /** 2790 * struct link_status_params - link stats parameter 2791 * @msg_type: message type is same as the request type 2792 * @msg_len: length of the entire request 2793 * @link_status: wme ts spec flag 2794 * @session_id: wsm ts spec flag 2795 */ 2796 struct link_status_params { 2797 uint16_t msg_type; 2798 uint16_t msg_len; 2799 uint8_t link_status; 2800 uint8_t session_id; 2801 }; 2802 2803 /** 2804 * struct dhcp_stop_ind_params - DHCP Stop indication message 2805 * @msgtype: message type is same as the request type 2806 * @msglen: length of the entire request 2807 * @device_mode: Mode of the device(ex:STA, AP) 2808 * @adapter_macaddr: MAC address of the adapter 2809 * @peer_macaddr: MAC address of the connected peer 2810 */ 2811 struct dhcp_stop_ind_params { 2812 uint16_t msgtype; 2813 uint16_t msglen; 2814 uint8_t device_mode; 2815 struct qdf_mac_addr adapter_macaddr; 2816 struct qdf_mac_addr peer_macaddr; 2817 }; 2818 2819 /** 2820 * struct aggr_add_ts_param - ADDTS parameters 2821 * @staIdx: station index 2822 * @tspecIdx: TSPEC handler uniquely identifying a TSPEC for a STA in a BSS 2823 * @tspec: tspec value 2824 * @status: CDF status 2825 * @sessionId: session id 2826 * @vdev_id: vdev id 2827 */ 2828 struct aggr_add_ts_param { 2829 uint16_t staIdx; 2830 uint16_t tspecIdx; 2831 struct mac_tspec_ie tspec[WMI_QOS_NUM_AC_MAX]; 2832 QDF_STATUS status[WMI_QOS_NUM_AC_MAX]; 2833 uint8_t sessionId; 2834 uint8_t vdev_id; 2835 }; 2836 2837 2838 /** 2839 * struct wlm_latency_level_param - WLM parameters 2840 * @wlm_latency_level: wlm latency level to set 2841 * 0 - normal, 1 - moderate, 2 - low, 3 - ultralow 2842 * @wlm_latency_flags: wlm latency flags to set 2843 * |31 12| 11 | 10 |9 8|7 6|5 4|3 2| 1 | 0 | 2844 * +------+------+------+------+------+------+------+-----+-----+ 2845 * | RSVD | SSLP | CSLP | RSVD | Roam | RSVD | DWLT | DFS | SUP | 2846 * +------+-------------+-------------+-------------------------+ 2847 * | WAL | PS | Roam | Scan | 2848 * 2849 * bit 0: Avoid scan request from HLOS if setting 2850 * bit 1: Skip DFS channel SCAN if setting 2851 * bit 2-3: Define policy of dwell time/duration for each foreign channel 2852 * (b2 b3) 2853 * (0 0 ): Default scan dwell time 2854 * (0 1 ): Reserve 2855 * (1 0 ): Shrink off channel dwell time 2856 * (1 1 ): Reserve 2857 * bit 4-5: Reserve for scan 2858 * bit 6-7: Define roaming policy 2859 * (b6 b7) 2860 * (0 0 ): Default roaming behavior, allow roaming in all scenarios 2861 * (0 1 ): Disallow all roaming 2862 * (1 0 ): Allow roaming when final bmissed 2863 * (1 1 ): Reserve 2864 * bit 8-9: Reserve for roaming 2865 * bit 10: Disable css power collapse if setting 2866 * bit 11: Disable sys sleep if setting 2867 * bit 12-31: Reserve for future useage 2868 * @vdev_id: vdev id 2869 */ 2870 struct wlm_latency_level_param { 2871 uint16_t wlm_latency_level; 2872 uint32_t wlm_latency_flags; 2873 uint16_t vdev_id; 2874 }; 2875 2876 #define WMI_MAX_FILTER_TEST_DATA_LEN 8 2877 #define WMI_MAX_NUM_MULTICAST_ADDRESS 240 2878 #define WMI_MAX_NUM_FILTERS 20 2879 #define WMI_MAX_NUM_TESTS_PER_FILTER 10 2880 2881 /** 2882 * enum packet_filter_type - packet filter type 2883 * @WMI_RCV_FILTER_TYPE_INVALID: invalid type 2884 * @WMI_RCV_FILTER_TYPE_FILTER_PKT: filter packet type 2885 * @WMI_RCV_FILTER_TYPE_BUFFER_PKT: buffer packet type 2886 * @WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE: max enum size 2887 */ 2888 enum packet_filter_type { 2889 WMI_RCV_FILTER_TYPE_INVALID, 2890 WMI_RCV_FILTER_TYPE_FILTER_PKT, 2891 WMI_RCV_FILTER_TYPE_BUFFER_PKT, 2892 WMI_RCV_FILTER_TYPE_MAX_ENUM_SIZE 2893 }; 2894 2895 /** 2896 * enum packet_protocol_type - packet protocol type 2897 * @WMI_FILTER_HDR_TYPE_INVALID: invalid type 2898 * @WMI_FILTER_HDR_TYPE_MAC: mac type 2899 * @WMI_FILTER_HDR_TYPE_ARP: trp type 2900 * @WMI_FILTER_HDR_TYPE_IPV4: ipv4 type 2901 * @WMI_FILTER_HDR_TYPE_IPV6: ipv6 type 2902 * @WMI_FILTER_HDR_TYPE_UDP: udp type 2903 * @WMI_FILTER_HDR_TYPE_MAX: max type 2904 */ 2905 enum packet_protocol_type { 2906 WMI_FILTER_HDR_TYPE_INVALID, 2907 WMI_FILTER_HDR_TYPE_MAC, 2908 WMI_FILTER_HDR_TYPE_ARP, 2909 WMI_FILTER_HDR_TYPE_IPV4, 2910 WMI_FILTER_HDR_TYPE_IPV6, 2911 WMI_FILTER_HDR_TYPE_UDP, 2912 WMI_FILTER_HDR_TYPE_MAX 2913 }; 2914 2915 /** 2916 * enum packet_filter_comp_type - packet filter comparison type 2917 * @WMI_FILTER_CMP_TYPE_INVALID: invalid type 2918 * @WMI_FILTER_CMP_TYPE_EQUAL: type equal 2919 * @WMI_FILTER_CMP_TYPE_MASK_EQUAL: mask equal 2920 * @WMI_FILTER_CMP_TYPE_NOT_EQUAL: type not equal 2921 * @WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL: mask not equal 2922 * @WMI_FILTER_CMP_TYPE_MAX: max type 2923 */ 2924 enum packet_filter_comp_type { 2925 WMI_FILTER_CMP_TYPE_INVALID, 2926 WMI_FILTER_CMP_TYPE_EQUAL, 2927 WMI_FILTER_CMP_TYPE_MASK_EQUAL, 2928 WMI_FILTER_CMP_TYPE_NOT_EQUAL, 2929 WMI_FILTER_CMP_TYPE_MASK_NOT_EQUAL, 2930 WMI_FILTER_CMP_TYPE_MAX 2931 }; 2932 2933 /** 2934 * struct rcv_pkt_filter_params - receive packet filter parameters 2935 * @protocolLayer - protocol layer 2936 * @cmpFlag - comparison flag 2937 * @dataLength - data length 2938 * @dataOffset - data offset 2939 * @reserved - resserved 2940 * @compareData - compare data 2941 * @dataMask - data mask 2942 */ 2943 struct rcv_pkt_filter_params { 2944 enum packet_protocol_type protocolLayer; 2945 enum packet_filter_comp_type cmpFlag; 2946 uint16_t dataLength; 2947 uint8_t dataOffset; 2948 uint8_t reserved; 2949 uint8_t compareData[WMI_MAX_FILTER_TEST_DATA_LEN]; 2950 uint8_t dataMask[WMI_MAX_FILTER_TEST_DATA_LEN]; 2951 }; 2952 2953 /** 2954 * struct rcv_pkt_filter_config - receive packet filter info 2955 * @filterId - filter id 2956 * @filterType - filter type 2957 * @numFieldParams - no of fields 2958 * @coalesceTime - reserved parameter 2959 * @self_macaddr - self mac address 2960 * @bssid - Bssid of the connected AP 2961 * @paramsData - data parameter 2962 */ 2963 struct rcv_pkt_filter_config { 2964 uint8_t filterId; 2965 enum packet_filter_type filterType; 2966 uint32_t numFieldParams; 2967 uint32_t coalesceTime; 2968 struct qdf_mac_addr self_macaddr; 2969 struct qdf_mac_addr bssid; 2970 struct rcv_pkt_filter_params paramsData[WMI_MAX_NUM_TESTS_PER_FILTER]; 2971 }; 2972 2973 /** 2974 * struct vdev_ie_info_param - IE info 2975 * @vdev_id - vdev for which the IE is being sent 2976 * @ie_id - ID of the IE 2977 * @length - length of the IE data 2978 * @data - IE data 2979 * 2980 * This structure is used to store the IE information. 2981 */ 2982 struct vdev_ie_info_param { 2983 uint32_t vdev_id; 2984 uint32_t ie_id; 2985 uint32_t length; 2986 uint32_t ie_source; 2987 uint32_t band; 2988 uint8_t *data; 2989 }; 2990 2991 #define WMI_MAX_NUM_FW_SEGMENTS 4 2992 2993 /** 2994 * struct fw_dump_seg_req_param - individual segment details 2995 * @seg_id - segment id. 2996 * @seg_start_addr_lo - lower address of the segment. 2997 * @seg_start_addr_hi - higher address of the segment. 2998 * @seg_length - length of the segment. 2999 * @dst_addr_lo - lower address of the destination buffer. 3000 * @dst_addr_hi - higher address of the destination buffer. 3001 * 3002 * This structure carries the information to firmware about the 3003 * individual segments. This structure is part of firmware memory 3004 * dump request. 3005 */ 3006 struct fw_dump_seg_req_param { 3007 uint8_t seg_id; 3008 uint32_t seg_start_addr_lo; 3009 uint32_t seg_start_addr_hi; 3010 uint32_t seg_length; 3011 uint32_t dst_addr_lo; 3012 uint32_t dst_addr_hi; 3013 }; 3014 3015 /** 3016 * struct fw_dump_req_param - firmware memory dump request details. 3017 * @request_id - request id. 3018 * @num_seg - requested number of segments. 3019 * @fw_dump_seg_req - individual segment information. 3020 * 3021 * This structure carries information about the firmware 3022 * memory dump request. 3023 */ 3024 struct fw_dump_req_param { 3025 uint32_t request_id; 3026 uint32_t num_seg; 3027 struct fw_dump_seg_req_param segment[WMI_MAX_NUM_FW_SEGMENTS]; 3028 }; 3029 3030 #define WMI_TDLS_MAX_SUPP_CHANNELS 128 3031 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 3032 #define WMI_2_4_GHZ_MAX_FREQ 3000 3033 3034 /** 3035 * struct tdls_update_ch_params - channel parameters 3036 * @chanId: ID of the channel 3037 * @pwr: power level 3038 * @dfsSet: is dfs supported or not 3039 * @half_rate: is the channel operating at 10MHz 3040 * @quarter_rate: is the channel operating at 5MHz 3041 */ 3042 struct tdls_update_ch_params { 3043 uint8_t chanId; 3044 uint8_t pwr; 3045 bool dfsSet; 3046 bool half_rate; 3047 bool quarter_rate; 3048 }; 3049 3050 /** 3051 * struct tdls_peer_cap_params - TDLS peer capablities parameters 3052 * @isPeerResponder: is peer responder or not 3053 * @peerUapsdQueue: peer uapsd queue 3054 * @peerMaxSp: peer max SP value 3055 * @peerBuffStaSupport: peer buffer sta supported or not 3056 * @peerOffChanSupport: peer offchannel support 3057 * @peerCurrOperClass: peer current operating class 3058 * @selfCurrOperClass: self current operating class 3059 * @peerChanLen: peer channel length 3060 * @peerChan: peer channel list 3061 * @peerOperClassLen: peer operating class length 3062 * @peerOperClass: peer operating class 3063 * @prefOffChanNum: peer offchannel number 3064 * @prefOffChanBandwidth: peer offchannel bandwidth 3065 * @opClassForPrefOffChan: operating class for offchannel 3066 */ 3067 struct tdls_peer_cap_params { 3068 uint8_t isPeerResponder; 3069 uint8_t peerUapsdQueue; 3070 uint8_t peerMaxSp; 3071 uint8_t peerBuffStaSupport; 3072 uint8_t peerOffChanSupport; 3073 uint8_t peerCurrOperClass; 3074 uint8_t selfCurrOperClass; 3075 uint8_t peerChanLen; 3076 struct tdls_update_ch_params peerChan[WMI_TDLS_MAX_SUPP_CHANNELS]; 3077 uint8_t peerOperClassLen; 3078 uint8_t peerOperClass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 3079 uint8_t prefOffChanNum; 3080 uint8_t prefOffChanBandwidth; 3081 uint8_t opClassForPrefOffChan; 3082 }; 3083 3084 /** 3085 * struct tdls_peer_state_params - TDLS peer state parameters 3086 * @vdevId: vdev id 3087 * @peerMacAddr: peer mac address 3088 * @peerCap: peer capabality 3089 */ 3090 struct tdls_peer_state_params { 3091 uint32_t vdevId; 3092 uint8_t peerMacAddr[IEEE80211_ADDR_LEN]; 3093 uint32_t peerState; 3094 struct tdls_peer_cap_params peerCap; 3095 }; 3096 3097 /** 3098 * struct wmi_tdls_params - TDLS parameters 3099 * @vdev_id: vdev id 3100 * @tdls_state: TDLS state 3101 * @notification_interval_ms: notification inerval 3102 * @tx_discovery_threshold: tx discovery threshold 3103 * @tx_teardown_threshold: tx teardown threashold 3104 * @rssi_teardown_threshold: RSSI teardown threshold 3105 * @rssi_delta: RSSI delta 3106 * @tdls_options: TDLS options 3107 * @peer_traffic_ind_window: raffic indication window 3108 * @peer_traffic_response_timeout: traffic response timeout 3109 * @puapsd_mask: uapsd mask 3110 * @puapsd_inactivity_time: uapsd inactivity time 3111 * @puapsd_rx_frame_threshold: uapsd rx frame threshold 3112 * @teardown_notification_ms: tdls teardown notification interval 3113 * @tdls_peer_kickout_threshold: tdls packet threshold for 3114 * peer kickout operation 3115 */ 3116 struct wmi_tdls_params { 3117 uint32_t vdev_id; 3118 uint32_t tdls_state; 3119 uint32_t notification_interval_ms; 3120 uint32_t tx_discovery_threshold; 3121 uint32_t tx_teardown_threshold; 3122 int32_t rssi_teardown_threshold; 3123 int32_t rssi_delta; 3124 uint32_t tdls_options; 3125 uint32_t peer_traffic_ind_window; 3126 uint32_t peer_traffic_response_timeout; 3127 uint32_t puapsd_mask; 3128 uint32_t puapsd_inactivity_time; 3129 uint32_t puapsd_rx_frame_threshold; 3130 uint32_t teardown_notification_ms; 3131 uint32_t tdls_peer_kickout_threshold; 3132 }; 3133 3134 #ifndef CONVERGED_TDLS_ENABLE 3135 /** 3136 * struct tdls_chan_switch_params - channel switch parameter structure 3137 * @vdev_id: vdev ID 3138 * @peer_mac_addr: Peer mac address 3139 * @tdls_off_ch_bw_offset: Target off-channel bandwitdh offset 3140 * @tdls_off_ch: Target Off Channel 3141 * @oper_class: Operating class for target channel 3142 * @is_responder: Responder or initiator 3143 */ 3144 struct tdls_channel_switch_params { 3145 uint32_t vdev_id; 3146 uint8_t peer_mac_addr[IEEE80211_ADDR_LEN]; 3147 uint16_t tdls_off_ch_bw_offset; 3148 uint8_t tdls_off_ch; 3149 uint8_t tdls_sw_mode; 3150 uint8_t oper_class; 3151 uint8_t is_responder; 3152 }; 3153 #endif 3154 3155 /** 3156 * struct dhcp_offload_info_params - dhcp offload parameters 3157 * @vdev_id: request data length 3158 * @dhcp_offload_enabled: dhcp offload enabled 3159 * @dhcp_client_num: dhcp client no 3160 * @dhcp_srv_addr: dhcp server ip 3161 */ 3162 struct dhcp_offload_info_params { 3163 uint32_t vdev_id; 3164 bool dhcp_offload_enabled; 3165 uint32_t dhcp_client_num; 3166 uint32_t dhcp_srv_addr; 3167 }; 3168 3169 /** 3170 * struct nan_req_params - NAN request params 3171 * @request_data_len: request data length 3172 * @request_data: request data 3173 */ 3174 struct nan_req_params { 3175 uint16_t request_data_len; 3176 uint8_t request_data[]; 3177 }; 3178 3179 3180 /** 3181 * struct app_type2_params - app type2parameter 3182 * @vdev_id: vdev id 3183 * @rc4_key: rc4 key 3184 * @rc4_key_len: rc4 key length 3185 * @ip_id: NC id 3186 * @ip_device_ip: NC IP address 3187 * @ip_server_ip: Push server IP address 3188 * @tcp_src_port: NC TCP port 3189 * @tcp_dst_port: Push server TCP port 3190 * @tcp_seq: tcp sequence 3191 * @tcp_ack_seq: tcp ack sequence 3192 * @keepalive_init: Initial ping interval 3193 * @keepalive_min: Minimum ping interval 3194 * @keepalive_max: Maximum ping interval 3195 * @keepalive_inc: Increment of ping interval 3196 * @gateway_mac: gateway mac address 3197 * @tcp_tx_timeout_val: tcp tx timeout value 3198 * @tcp_rx_timeout_val: tcp rx timeout value 3199 */ 3200 struct app_type2_params { 3201 uint8_t vdev_id; 3202 uint8_t rc4_key[16]; 3203 uint32_t rc4_key_len; 3204 /** ip header parameter */ 3205 uint32_t ip_id; 3206 uint32_t ip_device_ip; 3207 uint32_t ip_server_ip; 3208 /** tcp header parameter */ 3209 uint16_t tcp_src_port; 3210 uint16_t tcp_dst_port; 3211 uint32_t tcp_seq; 3212 uint32_t tcp_ack_seq; 3213 uint32_t keepalive_init; 3214 uint32_t keepalive_min; 3215 uint32_t keepalive_max; 3216 uint32_t keepalive_inc; 3217 struct qdf_mac_addr gateway_mac; 3218 uint32_t tcp_tx_timeout_val; 3219 uint32_t tcp_rx_timeout_val; 3220 }; 3221 3222 /** 3223 * struct app_type1_params - app type1 parameter 3224 * @vdev_id: vdev id 3225 * @wakee_mac_addr: mac address 3226 * @identification_id: identification id 3227 * @password: password 3228 * @id_length: id length 3229 * @pass_length: password length 3230 */ 3231 struct app_type1_params { 3232 uint8_t vdev_id; 3233 struct qdf_mac_addr wakee_mac_addr; 3234 uint8_t identification_id[8]; 3235 uint8_t password[16]; 3236 uint32_t id_length; 3237 uint32_t pass_length; 3238 }; 3239 3240 /** 3241 * enum wmi_ext_wow_type - wow type 3242 * @WMI_EXT_WOW_TYPE_APP_TYPE1: only enable wakeup for app type1 3243 * @WMI_EXT_WOW_TYPE_APP_TYPE2: only enable wakeup for app type2 3244 * @WMI_EXT_WOW_TYPE_APP_TYPE1_2: enable wakeup for app type1&2 3245 */ 3246 enum wmi_ext_wow_type { 3247 WMI_EXT_WOW_TYPE_APP_TYPE1, 3248 WMI_EXT_WOW_TYPE_APP_TYPE2, 3249 WMI_EXT_WOW_TYPE_APP_TYPE1_2, 3250 }; 3251 3252 /** 3253 * struct ext_wow_params - ext wow parameters 3254 * @vdev_id: vdev id 3255 * @type: wow type 3256 * @wakeup_pin_num: wake up gpio no 3257 */ 3258 struct ext_wow_params { 3259 uint8_t vdev_id; 3260 enum wmi_ext_wow_type type; 3261 uint32_t wakeup_pin_num; 3262 }; 3263 3264 /** 3265 * struct stats_ext_params - ext stats request 3266 * @vdev_id: vdev id 3267 * @request_data_len: request data length 3268 * @request_data: request data 3269 */ 3270 struct stats_ext_params { 3271 uint32_t vdev_id; 3272 uint32_t request_data_len; 3273 uint8_t request_data[]; 3274 }; 3275 3276 #define WMI_PERIODIC_TX_PTRN_MAX_SIZE 1536 3277 /** 3278 * struct periodic_tx_pattern - periodic tx pattern 3279 * @mac_address: MAC Address for the adapter 3280 * @ucPtrnId: Pattern ID 3281 * @ucPtrnSize: Pattern size 3282 * @usPtrnIntervalMs: in ms 3283 * @ucPattern: Pattern buffer 3284 */ 3285 struct periodic_tx_pattern { 3286 struct qdf_mac_addr mac_address; 3287 uint8_t ucPtrnId; 3288 uint16_t ucPtrnSize; 3289 uint32_t usPtrnIntervalMs; 3290 uint8_t ucPattern[WMI_PERIODIC_TX_PTRN_MAX_SIZE]; 3291 }; 3292 3293 #define WMI_GTK_OFFLOAD_KEK_BYTES 64 3294 #define WMI_GTK_OFFLOAD_KCK_BYTES 16 3295 #define WMI_GTK_OFFLOAD_ENABLE 0 3296 #define WMI_GTK_OFFLOAD_DISABLE 1 3297 3298 /** 3299 * struct flashing_req_params - led flashing parameter 3300 * @reqId: request id 3301 * @pattern_id: pattern identifier. 0: disconnected 1: connected 3302 * @led_x0: led flashing parameter0 3303 * @led_x1: led flashing parameter1 3304 */ 3305 struct flashing_req_params { 3306 uint32_t req_id; 3307 uint32_t pattern_id; 3308 uint32_t led_x0; 3309 uint32_t led_x1; 3310 }; 3311 3312 #define MAX_MEM_CHUNKS 32 3313 /** 3314 * struct wmi_host_mem_chunk - host memory chunk structure 3315 * @vaddr: Pointer to virtual address 3316 * @paddr: Physical address 3317 * @memctx: qdf memory context for mapped address. 3318 * @len: length of chunk 3319 * @req_id: request id from target 3320 */ 3321 struct wmi_host_mem_chunk { 3322 uint32_t *vaddr; 3323 uint32_t paddr; 3324 qdf_dma_mem_context(memctx); 3325 uint32_t len; 3326 uint32_t req_id; 3327 }; 3328 3329 /** 3330 * struct wmi_wifi_start_log - Structure to store the params sent to start/ 3331 * stop logging 3332 * @name: Attribute which indicates the type of logging like per packet 3333 * statistics, connectivity etc. 3334 * @verbose_level: Verbose level which can be 0,1,2,3 3335 * @flag: Flag field for future use 3336 */ 3337 struct wmi_wifi_start_log { 3338 uint32_t ring_id; 3339 uint32_t verbose_level; 3340 uint32_t flag; 3341 }; 3342 3343 /** 3344 * struct wmi_pcl_list - Format of PCL 3345 * @pcl_list: List of preferred channels 3346 * @weight_list: Weights of the PCL 3347 * @pcl_len: Number of channels in the PCL 3348 */ 3349 struct wmi_pcl_list { 3350 uint8_t pcl_list[128]; 3351 uint8_t weight_list[128]; 3352 uint32_t pcl_len; 3353 }; 3354 3355 /** 3356 * struct wmi_pcl_chan_weights - Params to get the valid weighed list 3357 * @pcl_list: Preferred channel list already sorted in the order of preference 3358 * @pcl_len: Length of the PCL 3359 * @saved_chan_list: Valid channel list updated as part of 3360 * WMA_UPDATE_CHAN_LIST_REQ 3361 * @saved_num_chan: Length of the valid channel list 3362 * @weighed_valid_list: Weights of the valid channel list. This will have one 3363 * to one mapping with valid_chan_list. FW expects channel order and size to be 3364 * as per the list provided in WMI_SCAN_CHAN_LIST_CMDID. 3365 * @weight_list: Weights assigned by policy manager 3366 */ 3367 struct wmi_pcl_chan_weights { 3368 uint8_t pcl_list[MAX_NUM_CHAN]; 3369 uint32_t pcl_len; 3370 uint8_t saved_chan_list[MAX_NUM_CHAN]; 3371 uint32_t saved_num_chan; 3372 uint8_t weighed_valid_list[MAX_NUM_CHAN]; 3373 uint8_t weight_list[MAX_NUM_CHAN]; 3374 }; 3375 3376 /** 3377 * struct wmi_hw_mode_params - HW mode params 3378 * @mac0_tx_ss: MAC0 Tx spatial stream 3379 * @mac0_rx_ss: MAC0 Rx spatial stream 3380 * @mac1_tx_ss: MAC1 Tx spatial stream 3381 * @mac1_rx_ss: MAC1 Rx spatial stream 3382 * @mac0_bw: MAC0 bandwidth 3383 * @mac1_bw: MAC1 bandwidth 3384 * @dbs_cap: DBS capabality 3385 * @agile_dfs_cap: Agile DFS capabality 3386 */ 3387 struct wmi_hw_mode_params { 3388 uint8_t mac0_tx_ss; 3389 uint8_t mac0_rx_ss; 3390 uint8_t mac1_tx_ss; 3391 uint8_t mac1_rx_ss; 3392 uint8_t mac0_bw; 3393 uint8_t mac1_bw; 3394 uint8_t dbs_cap; 3395 uint8_t agile_dfs_cap; 3396 }; 3397 3398 /** 3399 * struct ssid_hotlist_param - param for SSID Hotlist 3400 * @ssid: SSID which is being hotlisted 3401 * @band: Band in which the given SSID should be scanned 3402 * @rssi_low: Low bound on RSSI 3403 * @rssi_high: High bound on RSSI 3404 */ 3405 struct ssid_hotlist_param { 3406 struct mac_ssid ssid; 3407 uint8_t band; 3408 int32_t rssi_low; 3409 int32_t rssi_high; 3410 }; 3411 3412 /** 3413 * struct rssi_disallow_bssid - Structure holding Rssi based avoid candidate 3414 * @bssid: BSSID of the AP 3415 * @remaining_duration: remaining disallow duration in ms 3416 * @expected_rssi: RSSI at which STA can initate in dBm 3417 */ 3418 struct rssi_disallow_bssid { 3419 struct qdf_mac_addr bssid; 3420 uint32_t remaining_duration; 3421 int8_t expected_rssi; 3422 }; 3423 3424 3425 /** 3426 * struct roam_scan_filter_params - Structure holding roaming scan 3427 * parameters 3428 * @op_bitmap: bitmap to determine reason of roaming 3429 * @session_id: vdev id 3430 * @num_bssid_black_list: The number of BSSID's that we should 3431 * avoid connecting to. It is like a 3432 * blacklist of BSSID's. 3433 * @num_ssid_white_list: The number of SSID profiles that are 3434 * in the Whitelist. When roaming, we 3435 * consider the BSSID's with this SSID 3436 * also for roaming apart from the connected one's 3437 * @num_bssid_preferred_list: Number of BSSID's which have a preference over 3438 * others 3439 * @bssid_avoid_list: Blacklist SSID's 3440 * @ssid_allowed_list: Whitelist SSID's 3441 * @bssid_favored: Favorable BSSID's 3442 * @bssid_favored_factor: RSSI to be added to this BSSID to prefer it 3443 * @lca_disallow_config_present: LCA [Last Connected AP] disallow config present 3444 * @disallow_duration: How long LCA AP will be disallowed before it 3445 * can be a roaming candidate again, in seconds 3446 * @rssi_channel_penalization:How much RSSI will be penalized if candidate(s) 3447 * are found in the same channel as disallowed AP's, 3448 * in units of db 3449 * @num_disallowed_aps: How many APs the target should maintain in its 3450 * LCA list 3451 * 3452 * This structure holds all the key parameters related to 3453 * initial connection and roaming connections. 3454 */ 3455 3456 struct roam_scan_filter_params { 3457 uint32_t op_bitmap; 3458 uint8_t session_id; 3459 uint32_t num_bssid_black_list; 3460 uint32_t num_ssid_white_list; 3461 uint32_t num_bssid_preferred_list; 3462 struct qdf_mac_addr bssid_avoid_list[MAX_BSSID_AVOID_LIST]; 3463 struct mac_ssid ssid_allowed_list[MAX_SSID_ALLOWED_LIST]; 3464 struct qdf_mac_addr bssid_favored[MAX_BSSID_FAVORED]; 3465 uint8_t bssid_favored_factor[MAX_BSSID_FAVORED]; 3466 uint8_t lca_disallow_config_present; 3467 uint32_t disallow_duration; 3468 uint32_t rssi_channel_penalization; 3469 uint32_t num_disallowed_aps; 3470 uint32_t num_rssi_rejection_ap; 3471 struct rssi_disallow_bssid rssi_rejection_ap[MAX_RSSI_AVOID_BSSID_LIST]; 3472 }; 3473 3474 #define WMI_MAX_HLP_IE_LEN 2048 3475 /** 3476 * struct hlp_params - HLP info params 3477 * @vdev_id: vdev id 3478 * @hlp_ie_len: HLP IE length 3479 * @hlp_ie: HLP IE 3480 */ 3481 struct hlp_params { 3482 uint8_t vdev_id; 3483 uint32_t hlp_ie_len; 3484 uint8_t hlp_ie[WMI_MAX_HLP_IE_LEN]; 3485 }; 3486 3487 #define WMI_UNIFIED_MAX_PMKID_LEN 16 3488 #define WMI_UNIFIED_MAX_PMK_LEN 64 3489 3490 /** 3491 * struct wmi_unified_pmk_cache - used to set del pmkid cache 3492 * @tlv_header: TLV header, TLV tag and len; tag equals WMITLV_TAG_ARRAY_UINT32 3493 * @pmk_len: PMK len 3494 * for big-endian hosts, manual endian conversion will be needed to keep 3495 * the array values in their original order in spite of the automatic 3496 * byte-swap applied to WMI messages during download 3497 * @pmk: PMK array 3498 * @pmkid_len: PMK ID Len 3499 * @pmkid: PMK ID Array 3500 * @bssid: BSSID 3501 * @ssid: SSID 3502 * @cache_id: PMK Cache ID 3503 * @cat_flag: whether (bssid) or (ssid,cache_id) is valid 3504 * @action_flag: add/delete the entry 3505 */ 3506 struct wmi_unified_pmk_cache { 3507 uint32_t tlv_header; 3508 uint32_t pmk_len; 3509 uint8_t session_id; 3510 uint8_t pmk[WMI_UNIFIED_MAX_PMK_LEN]; 3511 uint32_t pmkid_len; 3512 uint8_t pmkid[WMI_UNIFIED_MAX_PMKID_LEN]; 3513 wmi_host_mac_addr bssid; 3514 struct mac_ssid ssid; 3515 uint32_t cache_id; 3516 uint32_t cat_flag; 3517 uint32_t action_flag; 3518 }; 3519 3520 3521 /** 3522 * struct ssid_hotlist_request_params - set SSID hotlist request struct 3523 * @request_id: ID of the request 3524 * @session_id: ID of the session 3525 * @lost_ssid_sample_size: Number of consecutive scans in which the SSID 3526 * must not be seen in order to consider the SSID "lost" 3527 * @ssid_count: Number of valid entries in the @ssids array 3528 * @ssids: Array that defines the SSIDs that are in the hotlist 3529 */ 3530 struct ssid_hotlist_request_params { 3531 uint32_t request_id; 3532 uint8_t session_id; 3533 uint32_t lost_ssid_sample_size; 3534 uint32_t ssid_count; 3535 struct ssid_hotlist_param ssids[WMI_EXTSCAN_MAX_HOTLIST_SSIDS]; 3536 }; 3537 3538 /** 3539 * struct wmi_unit_test_cmd - unit test command parameters 3540 * @vdev_id: vdev id 3541 * @module_id: module id 3542 * @num_args: number of arguments 3543 * @diag_token: dialog token, which identifies the transaction. 3544 * this number is generated by wifitool and may be used to 3545 * identify the transaction in the event path 3546 * @args: arguments 3547 */ 3548 struct wmi_unit_test_cmd { 3549 uint32_t vdev_id; 3550 uint32_t module_id; 3551 uint32_t num_args; 3552 uint32_t diag_token; 3553 uint32_t args[WMI_UNIT_TEST_MAX_NUM_ARGS]; 3554 }; 3555 3556 /** 3557 * struct wmi_roam_invoke_cmd - roam invoke command 3558 * @vdev_id: vdev id 3559 * @bssid: mac address 3560 * @channel: channel 3561 * @frame_len: frame length, includs mac header, fixed params and ies 3562 * @frame_buf: buffer contaning probe response or beacon 3563 * @is_same_bssid: flag to indicate if roaming is requested for same bssid 3564 */ 3565 struct wmi_roam_invoke_cmd { 3566 uint32_t vdev_id; 3567 uint8_t bssid[IEEE80211_ADDR_LEN]; 3568 uint32_t channel; 3569 uint32_t frame_len; 3570 uint8_t *frame_buf; 3571 uint8_t is_same_bssid; 3572 }; 3573 3574 /** 3575 * struct extscan_bssid_hotlist_set_params - set hotlist request 3576 * @request_id: request_id 3577 * @vdev_id: vdev id 3578 * @lost_ap_sample_size: number of samples to confirm AP loss 3579 * @num_ap: Number of hotlist APs 3580 * @ap: hotlist APs 3581 */ 3582 struct extscan_bssid_hotlist_set_params { 3583 uint32_t request_id; 3584 uint8_t vdev_id; 3585 uint32_t lost_ap_sample_size; 3586 uint32_t num_ap; 3587 struct ap_threshold_params ap[WMI_WLAN_EXTSCAN_MAX_HOTLIST_APS]; 3588 }; 3589 3590 /** 3591 * struct host_mem_req - Host memory request paramseters request by target 3592 * @req_id: Request id to identify the request. 3593 * @unit_size: Size of single unit requested. 3594 * @num_unit_info: Memory chunk info 3595 * @num_units: number of units requested. 3596 */ 3597 typedef struct { 3598 uint32_t req_id; 3599 uint32_t unit_size; 3600 uint32_t num_unit_info; 3601 uint32_t num_units; 3602 } host_mem_req; 3603 3604 #define WMI_HOST_DSCP_MAP_MAX (64) 3605 3606 /** 3607 * struct wmi_host_ext_resource_config - Extended resource config 3608 * @host_platform_config: Host plaform configuration. 3609 * @fw_featuew_bitmap: FW feature requested bitmap. 3610 */ 3611 typedef struct { 3612 uint32_t host_platform_config; 3613 3614 #define WMI_HOST_FW_FEATURE_LTEU_SUPPORT 0x0001 3615 #define WMI_HOST_FW_FEATURE_COEX_GPIO_SUPPORT 0x0002 3616 #define WMI_HOST_FW_FEATURE_AUX_RADIO_SPECTRAL_INTF 0x0004 3617 #define WMI_HOST_FW_FEATURE_AUX_RADIO_CHAN_LOAD_INTF 0x0008 3618 #define WMI_HOST_FW_FEATURE_BSS_CHANNEL_INFO_64 0x0010 3619 #define WMI_HOST_FW_FEATURE_PEER_STATS 0x0020 3620 #define WMI_HOST_FW_FEATURE_VDEV_STATS 0x0040 3621 /** 3622 * @brief fw_feature_bitmask - Enable/Disable features in FW 3623 * @details 3624 * The bits in fw_feature_bitmask are used as shown by the masks below: 3625 * 0x0001 - LTEU Config enable/disable 3626 * 0x0002 - COEX GPIO Config enable/disable 3627 * 0x0004 - Aux Radio enhancement for spectral scan enable/disable 3628 * 0x0008 - Aux Radio enhancement for chan load scan enable/disable 3629 * 0x0010 - BSS channel info stats enable/disable 3630 * The features in question are enabled by setting 3631 * the feature's bit to 1, 3632 * or disabled by setting the feature's bit to 0. 3633 */ 3634 uint32_t fw_feature_bitmap; 3635 3636 /* WLAN priority GPIO number 3637 * The target uses a GPIO pin to indicate when it is transmitting 3638 * high-priority traffic (e.g. beacon, management, or AC_VI) or 3639 * low-priority traffic (e.g. AC_BE, AC_BK). The HW uses this 3640 * WLAN GPIO pin to determine whether to abort WLAN tx in favor of 3641 * BT activity. 3642 * Which GPIO is used for this WLAN tx traffic priority specification 3643 * varies between platforms, so the host needs to indicate to the 3644 * target which GPIO to use. 3645 */ 3646 uint32_t wlan_priority_gpio; 3647 3648 /* Host will notify target which coex algorithm has to be 3649 * enabled based on HW, FW capability and device tree config. 3650 * Till now the coex algorithms were target specific. Now the 3651 * same target can choose between multiple coex algorithms 3652 * depending on device tree config on host. For backward 3653 * compatibility, version support will have option 0 and will 3654 * rely on FW compile time flags to decide the coex version 3655 * between VERSION_1, VERSION_2 and VERSION_3. Version info is 3656 * mandatory from VERSION_4 onwards for any new coex algorithms. 3657 * 3658 * 0 = no version support 3659 * 1 = COEX_VERSION_1 (3 wire coex) 3660 * 2 = COEX_VERSION_2 (2.5 wire coex) 3661 * 3 = COEX_VERSION_3 (2.5 wire coex+duty cycle) 3662 * 4 = COEX_VERSION_4 (4 wire coex) 3663 */ 3664 uint32_t coex_version; 3665 3666 /* There are multiple coex implementations on FW to support different 3667 * hardwares. Since the coex algos are mutually exclusive, host will 3668 * use below fields to send GPIO info to FW and these GPIO pins will 3669 * have different usages depending on the feature enabled. This is to 3670 * avoid adding multiple GPIO fields here for different features. 3671 * 3672 * COEX VERSION_4 (4 wire coex) : 3673 * 4 wire coex feature uses 1 common input request line from BT/ZB/ 3674 * Thread which interrupts the WLAN target processor directly, 1 input 3675 * priority line from BT and ZB each, 1 output line to grant access to 3676 * requesting IOT subsystem. WLAN uses the input priority line to 3677 * identify the requesting IOT subsystem. Request is granted based on 3678 * IOT interface priority and WLAN traffic. GPIO pin usage is as below: 3679 * coex_gpio_pin_1 = BT PRIORITY INPUT GPIO 3680 * coex_gpio_pin_2 = ZIGBEE PRIORITY INPUT GPIO 3681 * coex_gpio_pin_3 = GRANT OUTPUT GPIO 3682 * when a BT active interrupt is raised, WLAN reads 3683 * BT and ZB priority input GPIO pins to compare against the coex 3684 * priority table and accordingly sets the grant output GPIO to give 3685 * access to requesting IOT subsystem. 3686 */ 3687 uint32_t coex_gpio_pin_1; 3688 uint32_t coex_gpio_pin_2; 3689 uint32_t coex_gpio_pin_3; 3690 3691 /* add new members here */ 3692 } wmi_host_ext_resource_config; 3693 3694 /** 3695 * struct set_neighbour_rx_params - Neighbour RX params 3696 * @vdev_id: vdev id 3697 * @idx: index of param 3698 * @action: action 3699 * @type: Type of param 3700 */ 3701 struct set_neighbour_rx_params { 3702 uint8_t vdev_id; 3703 uint32_t idx; 3704 uint32_t action; 3705 uint32_t type; 3706 }; 3707 3708 /** 3709 * struct set_fwtest_params - FW test params 3710 * @arg: FW param id 3711 * @value: value 3712 */ 3713 struct set_fwtest_params { 3714 uint32_t arg; 3715 uint32_t value; 3716 }; 3717 3718 /** 3719 * struct set_custom_aggr_size_params - custom aggr size params 3720 * @vdev_id : vdev id 3721 * @tx_aggr_size : TX aggr size 3722 * @rx_aggr_size : RX aggr size 3723 * @enable_bitmap: Bitmap for aggr size check 3724 */ 3725 struct set_custom_aggr_size_params { 3726 uint32_t vdev_id; 3727 uint32_t tx_aggr_size; 3728 uint32_t rx_aggr_size; 3729 uint32_t ac:2, 3730 aggr_type:1, 3731 tx_aggr_size_disable:1, 3732 rx_aggr_size_disable:1, 3733 tx_ac_enable:1, 3734 reserved:26; 3735 }; 3736 3737 /** 3738 * enum wmi_host_custom_aggr_type_t: custon aggregate type 3739 * @WMI_HOST_CUSTOM_AGGR_TYPE_AMPDU: A-MPDU aggregation 3740 * @WMI_HOST_CUSTOM_AGGR_TYPE_AMSDU: A-MSDU aggregation 3741 * @WMI_HOST_CUSTOM_AGGR_TYPE_MAX: Max type 3742 */ 3743 enum wmi_host_custom_aggr_type_t { 3744 WMI_HOST_CUSTOM_AGGR_TYPE_AMPDU = 0, 3745 WMI_HOST_CUSTOM_AGGR_TYPE_AMSDU = 1, 3746 WMI_HOST_CUSTOM_AGGR_TYPE_MAX, 3747 }; 3748 3749 /* 3750 * msduq_update_params - MSDUQ update param structure 3751 * @tid_num: TID number 3752 * @msduq_update_mask: update bit mask 3753 * @qdepth_thresh_value: threshold value for the queue depth 3754 */ 3755 3756 #define QDEPTH_THRESH_MAX_UPDATES 1 3757 3758 typedef struct { 3759 uint32_t tid_num; 3760 uint32_t msduq_update_mask; 3761 uint32_t qdepth_thresh_value; 3762 } msduq_update_params; 3763 3764 /** 3765 * struct set_qdepth_thresh_params - MSDU Queue Depth Threshold Params 3766 * @vdev_id: vdev id 3767 * @pdev_id: pdev id 3768 * @mac_addr: MAC address 3769 * @num_of_msduq_updates: holds the number of tid updates 3770 */ 3771 3772 struct set_qdepth_thresh_params { 3773 uint32_t pdev_id; 3774 uint32_t vdev_id; 3775 uint8_t mac_addr[IEEE80211_ADDR_LEN]; 3776 uint32_t num_of_msduq_updates; 3777 msduq_update_params update_params[QDEPTH_THRESH_MAX_UPDATES]; 3778 }; 3779 3780 3781 3782 /** 3783 * struct config_ratemask_params - ratemask config parameters 3784 * @vdev_id: vdev id 3785 * @type: Type 3786 * @lower32: Lower 32 bits in the 1st 64-bit value 3787 * @higher32: Higher 32 bits in the 1st 64-bit value 3788 * @lower32_2: Lower 32 bits in the 2nd 64-bit value 3789 */ 3790 struct config_ratemask_params { 3791 uint8_t vdev_id; 3792 uint8_t type; 3793 uint32_t lower32; 3794 uint32_t higher32; 3795 uint32_t lower32_2; 3796 }; 3797 3798 /** 3799 * struct config_fils_params - FILS config params 3800 * @vdev_id: vdev id 3801 * @fd_period: 0 - Disabled, non-zero - Period in ms (mili seconds) 3802 */ 3803 struct config_fils_params { 3804 uint8_t vdev_id; 3805 uint32_t fd_period; 3806 }; 3807 3808 /** 3809 * struct peer_add_wds_entry_params - WDS peer entry add params 3810 * @dest_addr: Pointer to destination macaddr 3811 * @peer_addr: Pointer to peer mac addr 3812 * @flags: flags 3813 * @vdev_id: Vdev id 3814 */ 3815 struct peer_add_wds_entry_params { 3816 const uint8_t *dest_addr; 3817 uint8_t *peer_addr; 3818 uint32_t flags; 3819 uint32_t vdev_id; 3820 }; 3821 3822 /** 3823 * struct peer_del_wds_entry_params - WDS peer entry del params 3824 * @dest_addr: Pointer to destination macaddr 3825 * @vdev_id: Vdev id 3826 */ 3827 struct peer_del_wds_entry_params { 3828 uint8_t *dest_addr; 3829 uint32_t vdev_id; 3830 }; 3831 3832 /** 3833 * struct set_bridge_mac_addr_params - set bridge MAC addr params 3834 * @dest_addr: Pointer to bridge macaddr 3835 */ 3836 struct set_bridge_mac_addr_params { 3837 uint8_t *bridge_addr; 3838 }; 3839 3840 /** 3841 * struct peer_updatewds_entry_params - WDS peer entry update params 3842 * @wds_macaddr: Pointer to destination macaddr 3843 * @peer_add: Pointer to peer mac addr 3844 * @flags: flags 3845 * @vdev_id: Vdev id 3846 */ 3847 struct peer_update_wds_entry_params { 3848 uint8_t *wds_macaddr; 3849 uint8_t *peer_macaddr; 3850 uint32_t flags; 3851 uint32_t vdev_id; 3852 }; 3853 3854 /** 3855 * struct set_ps_mode_params - PS mode params 3856 * @vdev_id: vdev id 3857 * @psmode: PS mode 3858 */ 3859 struct set_ps_mode_params { 3860 uint8_t vdev_id; 3861 uint8_t psmode; 3862 }; 3863 3864 /** 3865 * @struct tt_level_config - Set Thermal throttlling config 3866 * @tmplwm: Temperature low water mark 3867 * @tmphwm: Temperature high water mark 3868 * @dcoffpercent: dc off percentage 3869 * @priority: priority 3870 */ 3871 typedef struct { 3872 uint32_t tmplwm; 3873 uint32_t tmphwm; 3874 uint32_t dcoffpercent; 3875 uint32_t priority; 3876 } tt_level_config; 3877 3878 /** 3879 * struct thermal_mitigation_params - Thermal mitigation params 3880 * @enable: Enable/Disable Thermal mitigation 3881 * @dc: DC 3882 * @dc_per_event: DC per event 3883 * @tt_level_config: TT level config params 3884 */ 3885 struct thermal_mitigation_params { 3886 uint32_t pdev_id; 3887 uint32_t enable; 3888 uint32_t dc; 3889 uint32_t dc_per_event; 3890 tt_level_config levelconf[THERMAL_LEVELS]; 3891 }; 3892 3893 /** 3894 * struct smart_ant_enable_params - Smart antenna params 3895 * @enable: Enable/Disable 3896 * @mode: SA mode 3897 * @rx_antenna: RX antenna config 3898 * @gpio_pin : GPIO pin config 3899 * @gpio_func : GPIO function config 3900 */ 3901 struct smart_ant_enable_params { 3902 uint32_t enable; 3903 uint32_t mode; 3904 uint32_t rx_antenna; 3905 uint32_t gpio_pin[WMI_HAL_MAX_SANTENNA]; 3906 uint32_t gpio_func[WMI_HAL_MAX_SANTENNA]; 3907 uint32_t pdev_id; 3908 }; 3909 3910 /** 3911 * struct smart_ant_rx_ant_params - RX antenna params 3912 * @antenna: RX antenna 3913 */ 3914 struct smart_ant_rx_ant_params { 3915 uint32_t antenna; 3916 uint32_t pdev_id; 3917 }; 3918 3919 /** 3920 * struct smart_ant_tx_ant_params - TX antenna param 3921 * @antenna_array: Antenna arry 3922 * @vdev_id: VDEV id 3923 */ 3924 struct smart_ant_tx_ant_params { 3925 uint32_t *antenna_array; 3926 uint8_t vdev_id; 3927 }; 3928 3929 /** 3930 * struct smart_ant_training_info_params - SA training params 3931 * @vdev_id: VDEV id 3932 * @rate_array: Rates array 3933 * @antenna_array: Antenna array 3934 * @numpkts: num packets for training 3935 */ 3936 struct smart_ant_training_info_params { 3937 uint8_t vdev_id; 3938 uint32_t *rate_array; 3939 uint32_t *antenna_array; 3940 uint32_t numpkts; 3941 }; 3942 3943 /** 3944 * struct smart_ant_node_config_params - SA node config params 3945 * @vdev_id: VDEV id 3946 * @cmd_id: Command id 3947 * @args_count: Arguments count 3948 */ 3949 struct smart_ant_node_config_params { 3950 uint8_t vdev_id; 3951 uint32_t cmd_id; 3952 uint16_t args_count; 3953 uint32_t *args_arr; 3954 }; 3955 /** 3956 * struct smart_ant_enable_tx_feedback_params - SA tx feeback params 3957 * @enable: Enable TX feedback for SA 3958 */ 3959 struct smart_ant_enable_tx_feedback_params { 3960 int enable; 3961 }; 3962 3963 /** 3964 * struct vdev_spectral_configure_params - SPectral config params 3965 * @vdev_id: VDEV id 3966 * @count: count 3967 * @period: period 3968 * @spectral_pri: Spectral priority 3969 * @fft_size: FFT size 3970 * @gc_enable: GC enable 3971 * @restart_enable: restart enabled 3972 * @noise_floor_ref: Noise floor reference 3973 * @init_delay: Init delays 3974 * @nb_tone_thr: NB tone threshold 3975 * @str_bin_thr: STR BIN threshold 3976 * @wb_rpt_mode: WB BIN threshold 3977 * @rssi_rpt_mode: RSSI report mode 3978 * @rssi_thr: RSSI threshold 3979 * @pwr_format: Power format 3980 * @rpt_mode: Report mdoe 3981 * @bin_scale: BIN scale 3982 * @dbm_adj: DBM adjust 3983 * @chn_mask: chain mask 3984 */ 3985 struct vdev_spectral_configure_params { 3986 uint8_t vdev_id; 3987 uint16_t count; 3988 uint16_t period; 3989 uint16_t spectral_pri; 3990 uint16_t fft_size; 3991 uint16_t gc_enable; 3992 uint16_t restart_enable; 3993 uint16_t noise_floor_ref; 3994 uint16_t init_delay; 3995 uint16_t nb_tone_thr; 3996 uint16_t str_bin_thr; 3997 uint16_t wb_rpt_mode; 3998 uint16_t rssi_rpt_mode; 3999 uint16_t rssi_thr; 4000 uint16_t pwr_format; 4001 uint16_t rpt_mode; 4002 uint16_t bin_scale; 4003 uint16_t dbm_adj; 4004 uint16_t chn_mask; 4005 }; 4006 4007 /** 4008 * struct vdev_spectral_enable_params - Spectral enabled params 4009 * @vdev_id: VDEV id 4010 * @active_valid: Active valid 4011 * @active: active 4012 * @enabled_valid: Enabled valid 4013 * @enabled: enabled 4014 */ 4015 struct vdev_spectral_enable_params { 4016 uint8_t vdev_id; 4017 uint8_t active_valid; 4018 uint8_t active; 4019 uint8_t enabled_valid; 4020 uint8_t enabled; 4021 }; 4022 4023 /** 4024 * struct pdev_set_regdomain_params - PDEV set reg domain params 4025 * @currentRDinuse: Current Reg domain 4026 * @currentRD2G: Current Reg domain 2G 4027 * @currentRD5G: Current Reg domain 5G 4028 * @ctl_2G: CTL 2G 4029 * @ctl_5G: CTL 5G 4030 * @dfsDomain: DFS domain 4031 * @pdev_id: pdev_id 4032 */ 4033 struct pdev_set_regdomain_params { 4034 uint16_t currentRDinuse; 4035 uint16_t currentRD2G; 4036 uint16_t currentRD5G; 4037 uint32_t ctl_2G; 4038 uint32_t ctl_5G; 4039 uint8_t dfsDomain; 4040 uint32_t pdev_id; 4041 }; 4042 4043 /** 4044 * struct set_quiet_mode_params - Set quiet mode params 4045 * @enabled: Enabled 4046 * @period: Quite period 4047 * @intval: Quite interval 4048 * @duration: Quite duration 4049 * @offset: offset 4050 */ 4051 struct set_quiet_mode_params { 4052 uint8_t enabled; 4053 uint8_t period; 4054 uint16_t intval; 4055 uint16_t duration; 4056 uint16_t offset; 4057 }; 4058 4059 /** 4060 * struct set_beacon_filter_params - Set beacon filter params 4061 * @vdev_id: VDEV id 4062 * @ie: Pointer to IE fields 4063 */ 4064 struct set_beacon_filter_params { 4065 uint8_t vdev_id; 4066 uint32_t *ie; 4067 }; 4068 4069 /** 4070 * struct remove_beacon_filter_params - Remove beacon filter params 4071 * @vdev_id: VDEV id 4072 */ 4073 struct remove_beacon_filter_params { 4074 uint8_t vdev_id; 4075 }; 4076 4077 /** 4078 * struct mgmt_params - Mgmt params 4079 * @vdev_id: vdev id 4080 * @buf_len: length of frame buffer 4081 * @wbuf: frame buffer 4082 */ 4083 struct mgmt_params { 4084 int vdev_id; 4085 uint32_t buf_len; 4086 qdf_nbuf_t wbuf; 4087 }; 4088 4089 /** 4090 * struct addba_clearresponse_params - Addba clear response params 4091 * @vdev_id: VDEV id 4092 */ 4093 struct addba_clearresponse_params { 4094 uint8_t vdev_id; 4095 }; 4096 4097 /** 4098 * struct addba_send_params - ADDBA send params 4099 * @vdev_id: vdev id 4100 * @tidno: TID 4101 * @buffersize: buffer size 4102 */ 4103 struct addba_send_params { 4104 uint8_t vdev_id; 4105 uint8_t tidno; 4106 uint16_t buffersize; 4107 }; 4108 4109 /** 4110 * struct delba_send_params - DELBA send params 4111 * @vdev_id: vdev id 4112 * @tidno: TID 4113 * @initiator: initiator 4114 * @reasoncode: reason code 4115 */ 4116 struct delba_send_params { 4117 uint8_t vdev_id; 4118 uint8_t tidno; 4119 uint8_t initiator; 4120 uint16_t reasoncode; 4121 }; 4122 /** 4123 * struct addba_setresponse_arams - Set ADDBA response params 4124 * @vdev_id: vdev id 4125 * @tidno: TID 4126 * @statuscode: status code in response 4127 */ 4128 struct addba_setresponse_params { 4129 uint8_t vdev_id; 4130 uint8_t tidno; 4131 uint16_t statuscode; 4132 }; 4133 4134 /** 4135 * struct singleamsdu_params - Single AMSDU params 4136 * @vdev_id: vdev is 4137 * @tidno: TID 4138 */ 4139 struct singleamsdu_params { 4140 uint8_t vdev_id; 4141 uint8_t tidno; 4142 }; 4143 4144 /** 4145 * struct set_qbosst_params - Set QBOOST params 4146 * @vdev_id: vdev id 4147 * @value: value 4148 */ 4149 struct set_qboost_params { 4150 uint8_t vdev_id; 4151 uint32_t value; 4152 }; 4153 4154 /** 4155 * struct mu_scan_params - MU scan params 4156 * @id: id 4157 * @type: type 4158 * @duration: Duration 4159 * @lteu_tx_power: LTEU tx power 4160 */ 4161 struct mu_scan_params { 4162 uint8_t id; 4163 uint8_t type; 4164 uint32_t duration; 4165 uint32_t lteu_tx_power; 4166 uint32_t rssi_thr_bssid; 4167 uint32_t rssi_thr_sta; 4168 uint32_t rssi_thr_sc; 4169 uint32_t plmn_id; 4170 uint32_t alpha_num_bssid; 4171 }; 4172 4173 /** 4174 * struct lteu_config_params - LTEU config params 4175 * @lteu_gpio_start: start MU/AP scan after GPIO toggle 4176 * @lteu_num_bins: no. of elements in the following arrays 4177 * @use_actual_nf: whether to use the actual NF obtained or a hardcoded one 4178 * @lteu_weight: weights for MU algo 4179 * @lteu_thresh: thresholds for MU algo 4180 * @lteu_gamma: gamma's for MU algo 4181 * @lteu_scan_timeout: timeout in ms to gpio toggle 4182 * @alpha_num_ssid: alpha for num active bssid calculation 4183 * @wifi_tx_power: Wifi Tx power 4184 */ 4185 struct lteu_config_params { 4186 uint8_t lteu_gpio_start; 4187 uint8_t lteu_num_bins; 4188 uint8_t use_actual_nf; 4189 uint32_t lteu_weight[LTEU_MAX_BINS]; 4190 uint32_t lteu_thresh[LTEU_MAX_BINS]; 4191 uint32_t lteu_gamma[LTEU_MAX_BINS]; 4192 uint32_t lteu_scan_timeout; 4193 uint32_t alpha_num_bssid; 4194 uint32_t wifi_tx_power; 4195 uint32_t allow_err_packets; 4196 }; 4197 4198 struct wmi_macaddr_t { 4199 /** upper 4 bytes of MAC address */ 4200 uint32_t mac_addr31to0; 4201 /** lower 2 bytes of MAC address */ 4202 uint32_t mac_addr47to32; 4203 }; 4204 4205 /** 4206 * struct atf_peer_info - ATF peer info params 4207 * @peer_macaddr: peer mac addr 4208 * @percentage_peer: percentage of air time for this peer 4209 * @vdev_id: Associated vdev id 4210 * @pdev_id: Associated pdev id 4211 */ 4212 typedef struct { 4213 struct wmi_macaddr_t peer_macaddr; 4214 uint32_t percentage_peer; 4215 uint32_t vdev_id; 4216 uint32_t pdev_id; 4217 } atf_peer_info; 4218 4219 /** 4220 * struct bwf_peer_info_t - BWF peer info params 4221 * @peer_macaddr: peer mac addr 4222 * @throughput: Throughput 4223 * @max_airtime: Max airtime 4224 * @priority: Priority level 4225 * @reserved: Reserved array 4226 * @vdev_id: Associated vdev id 4227 * @pdev_id: Associated pdev id 4228 */ 4229 typedef struct { 4230 struct wmi_macaddr_t peer_macaddr; 4231 uint32_t throughput; 4232 uint32_t max_airtime; 4233 uint32_t priority; 4234 uint32_t reserved[4]; 4235 uint32_t vdev_id; 4236 uint32_t pdev_id; 4237 } bwf_peer_info; 4238 4239 /** 4240 * struct set_bwf_params - BWF params 4241 * @num_peers: number of peers 4242 * @atf_peer_info: BWF peer info 4243 */ 4244 struct set_bwf_params { 4245 uint32_t num_peers; 4246 bwf_peer_info peer_info[1]; 4247 }; 4248 4249 /** 4250 * struct atf_peer_ext_info - ATF peer ext info params 4251 * @peer_macaddr: peer mac address 4252 * @group_index: group index 4253 * @atf_index_reserved: ATF index rsvd 4254 * @vdev_id: Associated vdev id 4255 * @pdev_id: Associated pdev id 4256 */ 4257 typedef struct { 4258 struct wmi_macaddr_t peer_macaddr; 4259 uint32_t group_index; 4260 uint32_t atf_index_reserved; 4261 uint16_t vdev_id; 4262 uint16_t pdev_id; 4263 } atf_peer_ext_info; 4264 4265 /** 4266 * struct set_atf_params - ATF params 4267 * @num_peers: number of peers 4268 * @atf_peer_info: ATF peer info 4269 */ 4270 struct set_atf_params { 4271 uint32_t num_peers; 4272 atf_peer_info peer_info[ATF_ACTIVED_MAX_CLIENTS]; 4273 }; 4274 4275 /** 4276 * struct atf_peer_request_params - ATF peer req params 4277 * @num_peers: number of peers 4278 * @atf_peer_ext_info: ATF peer ext info 4279 */ 4280 struct atf_peer_request_params { 4281 uint32_t num_peers; 4282 atf_peer_ext_info peer_ext_info[ATF_ACTIVED_MAX_CLIENTS]; 4283 }; 4284 4285 /** 4286 * struct atf_group_info - ATF group info params 4287 * @percentage_group: Percentage AT for group 4288 * @atf_group_units_reserved: ATF group information 4289 * @pdev_id: Associated pdev id 4290 */ 4291 typedef struct { 4292 uint32_t percentage_group; 4293 uint32_t atf_group_units_reserved; 4294 uint32_t pdev_id; 4295 } atf_group_info; 4296 4297 /** 4298 * struct atf_grouping_params - ATF grouping params 4299 * @num_groups: number of groups 4300 * @group_inf: Group informaition 4301 */ 4302 struct atf_grouping_params { 4303 uint32_t num_groups; 4304 atf_group_info group_info[ATF_ACTIVED_MAX_ATFGROUPS]; 4305 }; 4306 4307 /** 4308 * struct wlan_profile_params - WLAN profile params 4309 * @param_id: param id 4310 * @profile_id: profile id 4311 * @enable: enable 4312 */ 4313 struct wlan_profile_params { 4314 uint32_t param_id; 4315 uint32_t profile_id; 4316 uint32_t enable; 4317 }; 4318 4319 /* struct ht_ie_params - HT IE params 4320 * @ie_len: IE length 4321 * @ie_data: pointer to IE data 4322 * @tx_streams: Tx streams supported for this HT IE 4323 * @rx_streams: Rx streams supported for this HT IE 4324 */ 4325 struct ht_ie_params { 4326 uint32_t ie_len; 4327 uint8_t *ie_data; 4328 uint32_t tx_streams; 4329 uint32_t rx_streams; 4330 }; 4331 4332 /* struct vht_ie_params - VHT IE params 4333 * @ie_len: IE length 4334 * @ie_data: pointer to IE data 4335 * @tx_streams: Tx streams supported for this VHT IE 4336 * @rx_streams: Rx streams supported for this VHT IE 4337 */ 4338 struct vht_ie_params { 4339 uint32_t ie_len; 4340 uint8_t *ie_data; 4341 uint32_t tx_streams; 4342 uint32_t rx_streams; 4343 }; 4344 4345 /** 4346 * struct wmi_host_wmeParams - WME params 4347 * @wmep_acm: ACM paramete 4348 * @wmep_aifsn: AIFSN parameters 4349 * @wmep_logcwmin: cwmin in exponential form 4350 * @wmep_logcwmax: cwmax in exponential form 4351 * @wmep_txopLimit: txopLimit 4352 * @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack 4353 */ 4354 struct wmi_host_wmeParams { 4355 u_int8_t wmep_acm; 4356 u_int8_t wmep_aifsn; 4357 u_int8_t wmep_logcwmin; 4358 u_int8_t wmep_logcwmax; 4359 u_int16_t wmep_txopLimit; 4360 u_int8_t wmep_noackPolicy; 4361 }; 4362 4363 /** 4364 * struct wmm_update_params - WMM update params 4365 * @wmep_array: WME params for each AC 4366 */ 4367 struct wmm_update_params { 4368 struct wmi_host_wmeParams *wmep_array; 4369 }; 4370 4371 /** 4372 * struct wmi_host_wmevParams - WME params 4373 * @wmep_acm: ACM paramete 4374 * @wmep_aifsn: AIFSN parameters 4375 * @wmep_logcwmin: cwmin in exponential form 4376 * @wmep_logcwmax: cwmax in exponential form 4377 * @wmep_txopLimit: txopLimit 4378 * @wmep_noackPolicy: No-Ack Policy: 0=ack, 1=no-ack 4379 */ 4380 struct wmi_host_wme_vparams { 4381 u_int32_t acm; 4382 u_int32_t aifs; 4383 u_int32_t cwmin; 4384 u_int32_t cwmax; 4385 union { 4386 u_int32_t txoplimit; 4387 u_int32_t mu_edca_timer; 4388 }; 4389 u_int32_t noackpolicy; 4390 }; 4391 4392 /** 4393 * struct ant_switch_tbl_params - Antenna switch table params 4394 * @ant_ctrl_common1: ANtenna control common param 1 4395 * @ant_ctrl_common2: Antenna control commn param 2 4396 */ 4397 struct ant_switch_tbl_params { 4398 uint32_t ant_ctrl_common1; 4399 uint32_t ant_ctrl_common2; 4400 uint32_t pdev_id; 4401 uint32_t antCtrlChain; 4402 }; 4403 4404 /** 4405 * struct ratepwr_table_params - Rate power table params 4406 * @ratepwr_tbl: pointer to rate power table 4407 * @ratepwr_len: rate power table len 4408 */ 4409 struct ratepwr_table_params { 4410 uint8_t *ratepwr_tbl; 4411 uint16_t ratepwr_len; 4412 }; 4413 4414 /** 4415 * struct ctl_table_params - Ctl table params 4416 * @ctl_array: pointer to ctl array 4417 * @ctl_cmd_len: ctl command length 4418 * @is_acfg_ctl: is acfg_ctl table 4419 */ 4420 struct ctl_table_params { 4421 uint8_t *ctl_array; 4422 uint16_t ctl_cmd_len; 4423 uint32_t target_type; 4424 bool is_2g; 4425 uint32_t ctl_band; 4426 uint32_t pdev_id; 4427 }; 4428 4429 /** 4430 * struct mimogain_table_params - MIMO gain table params 4431 * @array_gain: pointer to array gain table 4432 * @tbl_len: table length 4433 * @multichain_gain_bypass: bypass multichain gain 4434 */ 4435 struct mimogain_table_params { 4436 uint8_t *array_gain; 4437 uint16_t tbl_len; 4438 bool multichain_gain_bypass; 4439 uint32_t pdev_id; 4440 }; 4441 4442 /** 4443 * struct ratepwr_chainmask_params - Rate power chainmask params 4444 * @ratepwr_chain_tbl: pointer to ratepwr chain table 4445 * @num_rate: number of rate in table 4446 * @pream_type: preamble type 4447 * @ops: ops 4448 */ 4449 struct ratepwr_chainmsk_params { 4450 uint32_t *ratepwr_chain_tbl; 4451 uint16_t num_rate; 4452 uint8_t pream_type; 4453 uint8_t ops; 4454 }; 4455 4456 struct macaddr_params { 4457 uint8_t *macaddr; 4458 }; 4459 4460 /** 4461 * struct acparams_params - acparams config structure 4462 * @ac: AC to configure 4463 * @use_rts: Use rts for this AC 4464 * @aggrsize_scaling: Aggregrate size scaling for the AC 4465 * @min_kbps: min kbps req 4466 */ 4467 struct acparams_params { 4468 uint8_t ac; 4469 uint8_t use_rts; 4470 uint8_t aggrsize_scaling; 4471 uint32_t min_kbps; 4472 }; 4473 4474 /** 4475 * struct vap_dscp_tid_map_params - DSCP tid map params 4476 * @vdev_id: vdev id 4477 * @dscp_to_tid_map: pointer to arry of tid to dscp map table 4478 */ 4479 struct vap_dscp_tid_map_params { 4480 uint8_t vdev_id; 4481 uint32_t *dscp_to_tid_map; 4482 }; 4483 4484 /** 4485 * struct proxy_ast_reserve_params - Proxy AST reserve params 4486 * @macaddr: macaddr for proxy ast entry 4487 */ 4488 struct proxy_ast_reserve_params { 4489 uint8_t *macaddr; 4490 }; 4491 4492 /** 4493 * struct fips_params - FIPS params config 4494 * @key: pointer to key 4495 * @key_len: length of key 4496 * @data: pointer data buf 4497 * @data_len: length of data buf 4498 * @mode: mode 4499 * @op: operation 4500 * @pdev_id: pdev_id for identifying the MAC 4501 */ 4502 struct fips_params { 4503 uint8_t *key; 4504 uint32_t key_len; 4505 uint8_t *data; 4506 uint32_t data_len; 4507 uint32_t mode; 4508 uint32_t op; 4509 uint32_t pdev_id; 4510 }; 4511 4512 /** 4513 * struct mcast_group_update_param - Mcast group table update to target 4514 * @action: Addition/deletion 4515 * @wildcard: iwldcard table entry? 4516 * @mcast_ip_addr: mcast ip address to be updated 4517 * @mcast_ip_addr_bytes: mcast ip addr bytes 4518 * @ucast_mac_addr: ucast peer mac subscribed to mcast ip 4519 * @filter_mode: filter mode 4520 * @nsrcs: number of entries in source list 4521 * @srcs: source mac accpted 4522 * @mask: mask 4523 * @vap_id: vdev id 4524 * @is_action_delete: is delete 4525 * @is_filter_mode_snoop: 4526 * @is_mcast_addr_len: 4527 */ 4528 struct mcast_group_update_params { 4529 int action; 4530 int wildcard; 4531 uint8_t *mcast_ip_addr; 4532 int mcast_ip_addr_bytes; 4533 uint8_t *ucast_mac_addr; 4534 uint8_t filter_mode; 4535 uint8_t nsrcs; 4536 uint8_t *srcs; 4537 uint8_t *mask; 4538 uint8_t vap_id; 4539 bool is_action_delete; 4540 bool is_filter_mode_snoop; 4541 bool is_mcast_addr_len; 4542 }; 4543 4544 /** 4545 * struct periodic_chan_stats_param - periodic channel stats req param 4546 * @stats_period: stats period update 4547 * @enable: enable/disable 4548 */ 4549 struct periodic_chan_stats_params { 4550 uint32_t stats_period; 4551 bool enable; 4552 uint32_t pdev_id; 4553 }; 4554 4555 /** 4556 * enum wmi_host_packet_power_rate_flags: packer power rate flags 4557 * @WMI_HOST_FLAG_RTSENA: RTS enabled 4558 * @WMI_HOST_FLAG_CTSENA: CTS enabled 4559 * @WMI_HOST_FLAG_STBC: STBC is set 4560 * @WMI_HOST_FLAG_LDPC: LDPC is set 4561 * @WMI_HOST_FLAG_TXBF: Tx Bf enabled 4562 * @WMI_HOST_FLAG_MU2: MU2 data 4563 * @WMI_HOST_FLAG_MU3: MU3 data 4564 * @WMI_HOST_FLAG_SERIES1: Rate series 1 4565 * @WMI_HOST_FLAG_SGI: Short gaurd interval 4566 */ 4567 enum wmi_host_packet_power_rate_flags { 4568 WMI_HOST_FLAG_RTSENA = 0x0001, 4569 WMI_HOST_FLAG_CTSENA = 0x0002, 4570 WMI_HOST_FLAG_STBC = 0x0004, 4571 WMI_HOST_FLAG_LDPC = 0x0008, 4572 WMI_HOST_FLAG_TXBF = 0x0010, 4573 WMI_HOST_FLAG_MU2 = 0x0020, 4574 WMI_HOST_FLAG_MU3 = 0x0040, 4575 WMI_HOST_FLAG_SERIES1 = 0x0080, 4576 WMI_HOST_FLAG_SGI = 0x0100, 4577 }; 4578 4579 /** 4580 * enum wmi_host_su_mu_ofdma_flags: packer power su mu ofdma flags 4581 * @WMI_HOST_FLAG_SU: SU Data 4582 * @WMI_HOST_FLAG_DL_MU_MIMO_AC: DL AC MU data 4583 * @WMI_HOST_FLAG_DL_MU_MIMO_AX: DL AX MU data 4584 * @WMI_HOST_FLAG_DL_OFDMA: DL OFDMA data 4585 * @WMI_HOST_FLAG_UL_OFDMA: UL OFDMA data 4586 * @WMI_HOST_FLAG_UL_MU_MIMO: UL MU data 4587 */ 4588 enum wmi_host_su_mu_ofdma_flags { 4589 WMI_HOST_FLAG_SU = 0x0001, 4590 WMI_HOST_FLAG_DL_MU_MIMO_AC = 0x0002, 4591 WMI_HOST_FLAG_DL_MU_MIMO_AX = 0x0003, 4592 WMI_HOST_FLAG_DL_OFDMA = 0x0004, 4593 WMI_HOST_FLAG_UL_OFDMA = 0x0005, 4594 WMI_HOST_FLAG_UL_MU_MIMO = 0x0006, 4595 }; 4596 4597 /** 4598 * enum wmi_host_preamble_type: preamble type 4599 * @WMI_HOST_PREAMBLE_OFDM: ofdm rate 4600 * @WMI_HOST_PREAMBLE_CCK: cck rate 4601 * @WMI_HOST_PREAMBLE_HT: ht rate 4602 * @WMI_HOST_PREAMBLE_VHT: vht rate 4603 * @WMI_HOST_PREAMBLE_HE: 11ax he rate 4604 */ 4605 enum wmi_host_preamble_type { 4606 WMI_HOST_PREAMBLE_OFDM = 0, 4607 WMI_HOST_PREAMBLE_CCK = 1, 4608 WMI_HOST_PREAMBLE_HT = 2, 4609 WMI_HOST_PREAMBLE_VHT = 3, 4610 WMI_HOST_PREAMBLE_HE = 4, 4611 }; 4612 4613 /** 4614 * struct packet_power_info_params - packet power info params 4615 * @chainmask: chain mask 4616 * @chan_width: channel bandwidth 4617 * @rate_flags: rate flags 4618 * @su_mu_ofdma: su/mu/ofdma flags 4619 * @nss: number of spatial streams 4620 * @preamble: preamble 4621 * @hw_rate: 4622 */ 4623 struct packet_power_info_params { 4624 uint16_t chainmask; 4625 uint16_t chan_width; 4626 uint16_t rate_flags; 4627 uint16_t su_mu_ofdma; 4628 uint16_t nss; 4629 uint16_t preamble; 4630 uint16_t hw_rate; 4631 uint32_t pdev_id; 4632 }; 4633 4634 /** 4635 * WMI_GPIO_CONFIG_CMDID 4636 */ 4637 enum { 4638 WMI_HOST_GPIO_PULL_NONE, 4639 WMI_HOST_GPIO_PULL_UP, 4640 WMI_HOST_GPIO_PULL_DOWN, 4641 }; 4642 4643 /** 4644 * WMI_GPIO_INTTYPE 4645 */ 4646 enum { 4647 WMI_HOST_GPIO_INTTYPE_DISABLE, 4648 WMI_HOST_GPIO_INTTYPE_RISING_EDGE, 4649 WMI_HOST_GPIO_INTTYPE_FALLING_EDGE, 4650 WMI_HOST_GPIO_INTTYPE_BOTH_EDGE, 4651 WMI_HOST_GPIO_INTTYPE_LEVEL_LOW, 4652 WMI_HOST_GPIO_INTTYPE_LEVEL_HIGH 4653 }; 4654 4655 /** 4656 * struct wmi_host_gpio_input_event - GPIO input event structure 4657 * @gpio_num: GPIO number which changed state 4658 */ 4659 typedef struct { 4660 uint32_t gpio_num; /* GPIO number which changed state */ 4661 } wmi_host_gpio_input_event; 4662 4663 /** 4664 * struct gpio_config_params - GPIO config params 4665 * @gpio_num: GPIO number to config 4666 * @input: input/output 4667 * @pull_type: pull type 4668 * @intr_mode: int mode 4669 */ 4670 struct gpio_config_params { 4671 uint32_t gpio_num; 4672 uint32_t input; 4673 uint32_t pull_type; 4674 uint32_t intr_mode; 4675 }; 4676 4677 /** 4678 * struct gpio_output_params - GPIO output params 4679 * @gpio_num: GPIO number to configure 4680 * @set: set/reset 4681 */ 4682 struct gpio_output_params { 4683 uint32_t gpio_num; 4684 uint32_t set; 4685 }; 4686 4687 /* flags bit 0: to configure wlan priority bitmap */ 4688 #define WMI_HOST_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT (1<<0) 4689 /* flags bit 1: to configure both period and wlan duration */ 4690 #define WMI_HOST_BTCOEX_PARAM_FLAGS_DUTY_CYCLE_BIT (1<<1) 4691 struct btcoex_cfg_params { 4692 /* WLAN priority bitmask for different frame types */ 4693 uint32_t btcoex_wlan_priority_bitmap; 4694 /* This command is used to configure different btcoex params 4695 * in different situations.The host sets the appropriate bit(s) 4696 * in btcoex_param_flags to indicate which configuration parameters 4697 * are valid within a particular BT coex config message, so that one 4698 * BT configuration parameter can be configured without affecting 4699 * other BT configuration parameters.E.g. if the host wants to 4700 * configure only btcoex_wlan_priority_bitmap it sets only 4701 * WMI_BTCOEX_PARAM_FLAGS_WLAN_PRIORITY_BITMAP_BIT in 4702 * btcoex_param_flags so that firmware will not overwrite 4703 * other params with default value passed in the command. 4704 * Host can also set multiple bits in btcoex_param_flags 4705 * to configure more than one param in single message. 4706 */ 4707 uint32_t btcoex_param_flags; 4708 /* period denotes the total time in milliseconds which WLAN and BT share 4709 * configured percentage for transmission and reception. 4710 */ 4711 uint32_t period; 4712 /* wlan duration is the time in milliseconds given for wlan 4713 * in above period. 4714 */ 4715 uint32_t wlan_duration; 4716 }; 4717 4718 #define WMI_HOST_COEX_CONFIG_BUF_MAX_LEN 32 /* 128 bytes */ 4719 /** 4720 * coex_ver_cfg_t 4721 * @coex_version: Version for 4 wire coex 4722 * @length: Length of payload buffer based on version 4723 * @config_buf: Payload Buffer 4724 */ 4725 typedef struct { 4726 /* VERSION_4 (4 wire coex) */ 4727 uint32_t coex_version; 4728 4729 /* No. of uint32_t elements in payload buffer. Will depend on the coex 4730 * version 4731 */ 4732 uint32_t length; 4733 4734 /* Payload buffer */ 4735 uint32_t config_buf[WMI_HOST_COEX_CONFIG_BUF_MAX_LEN]; 4736 } coex_ver_cfg_t; 4737 4738 #define WMI_HOST_RTT_REPORT_CFR 0 4739 #define WMI_HOST_RTT_NO_REPORT_CFR 1 4740 #define WMI_HOST_RTT_AGGREGATE_REPORT_NON_CFR 2 4741 /** 4742 * struct rtt_meas_req_test_params 4743 * @peer: peer mac address 4744 * @req_frame_type: RTT request frame type 4745 * @req_bw: requested bandwidth 4746 * @req_preamble: Preamble 4747 * @req_num_req: num of requests 4748 * @req_report_type: report type 4749 * @num_measurements: number of measurements 4750 * @asap_mode: priority 4751 * @lci_requested: LCI requested 4752 * @loc_civ_requested: 4753 * @channel_param: channel param 4754 * @req_id: requested id 4755 */ 4756 struct rtt_meas_req_test_params { 4757 uint8_t peer[IEEE80211_ADDR_LEN]; 4758 int req_frame_type; 4759 int req_bw; 4760 int req_preamble; 4761 int req_num_req; 4762 int req_report_type; 4763 uint32_t num_measurements; 4764 uint32_t asap_mode; 4765 uint32_t lci_requested; 4766 uint32_t loc_civ_requested; 4767 struct channel_param channel; 4768 uint8_t req_id; 4769 }; 4770 4771 /** 4772 * struct rtt_meas_req_params - RTT measurement request params 4773 * @req_id: Request id 4774 * @vdev_id: vdev id 4775 * @sta_mac_addr: pointer to station mac address 4776 * @spoof_mac_addr: pointer to spoof mac address 4777 * @is_mode_na: 11NA 4778 * @is_mode_ac: AC 4779 * @is_bw_20: 20 4780 * @is_bw_40: 40 4781 * @is_bw_80: 80 4782 * @num_probe_rqst: number of probe request 4783 * @channel_param: channel param 4784 */ 4785 struct rtt_meas_req_params { 4786 uint8_t req_id; 4787 uint8_t vdev_id; 4788 uint8_t *sta_mac_addr; 4789 uint8_t *spoof_mac_addr; 4790 bool is_mode_na; 4791 bool is_mode_ac; 4792 bool is_bw_20; 4793 bool is_bw_40; 4794 bool is_bw_80; 4795 uint32_t num_probe_rqst; 4796 struct channel_param channel; 4797 }; 4798 4799 /** 4800 * struct lci_set_params - LCI params 4801 * @lci_data: pointer to LCI data 4802 * @latitude_unc: latitude 4803 * @latitude_0_12: bits 0 to 1 of latitude 4804 * @latitude_2_33: bits 2 to 33 of latitude 4805 * @longitude_unc: longitude 4806 * @longitude_0_1: bits 0 to 1 of longitude 4807 * @longitude_2_33: bits 2 to 33 of longitude 4808 * @altitude_type: altitude type 4809 * @altitude_unc_0_3: altitude bits 0 - 3 4810 * @altitude_unc_4_5: altitude bits 4 - 5 4811 * @altitude: altitude 4812 * @datum: dataum 4813 * @reg_loc_agmt: 4814 * @reg_loc_dse: 4815 * @dep_sta: 4816 * @version: version 4817 */ 4818 struct lci_set_params { 4819 void *lci_data; 4820 uint8_t latitude_unc:6, 4821 latitude_0_1:2; 4822 uint32_t latitude_2_33; 4823 uint8_t longitude_unc:6, 4824 longitude_0_1:2; 4825 uint32_t longitude_2_33; 4826 uint8_t altitude_type:4, 4827 altitude_unc_0_3:4; 4828 uint32_t altitude_unc_4_5:2, 4829 altitude:30; 4830 uint8_t datum:3, 4831 reg_loc_agmt:1, 4832 reg_loc_dse:1, 4833 dep_sta:1, 4834 version:2; 4835 uint8_t *colocated_bss; 4836 int msg_len; 4837 }; 4838 4839 /** 4840 * struct lcr_set_params - LCR params 4841 * @lcr_data: pointer to lcr data 4842 */ 4843 struct lcr_set_params { 4844 void *lcr_data; 4845 int msg_len; 4846 }; 4847 4848 /** 4849 * struct rtt_keepalive_req_params - RTT keepalive params 4850 * @macaddr: pointer to macaddress 4851 * @req_id: Request id 4852 * @vdev_id: vdev id 4853 * @stop: start/stop 4854 */ 4855 struct rtt_keepalive_req_params { 4856 uint8_t *macaddr; 4857 uint8_t req_id; 4858 uint8_t vdev_id; 4859 bool stop; 4860 }; 4861 4862 /** 4863 * struct rx_reorder_queue_setup_params - Reorder queue setup params 4864 * @peer_mac_addr: Peer mac address 4865 * @tid: TID 4866 * @vdev_id: vdev id 4867 * @hw_qdesc_paddr_lo: lower 32 bits of queue desc adddress 4868 * @hw_qdesc_paddr_hi: upper 32 bits of queue desc adddress 4869 * @queue_no: 16-bit number assigned by host for queue 4870 * @ba_window_size_valid: BA window size validity flag 4871 * @ba_window_size: BA window size 4872 */ 4873 struct rx_reorder_queue_setup_params { 4874 uint8_t *peer_macaddr; 4875 uint16_t tid; 4876 uint16_t vdev_id; 4877 uint32_t hw_qdesc_paddr_lo; 4878 uint32_t hw_qdesc_paddr_hi; 4879 uint16_t queue_no; 4880 uint8_t ba_window_size_valid; 4881 uint16_t ba_window_size; 4882 4883 }; 4884 4885 /** 4886 * struct rx_reorder_queue_remove_params - Reorder queue setup params 4887 * @peer_mac_addr: Peer mac address 4888 * @vdev_id: vdev id 4889 * @peer_tid_bitmap: peer tid bitmap 4890 */ 4891 struct rx_reorder_queue_remove_params { 4892 uint8_t *peer_macaddr; 4893 uint16_t vdev_id; 4894 uint32_t peer_tid_bitmap; 4895 }; 4896 4897 /** 4898 * struct wmi_host_stats_event - Stats event params 4899 * @stats_id: stats id of type wmi_host_stats_event 4900 * @num_pdev_stats: number of pdev stats event structures 0 or 1 4901 * @num_pdev_ext_stats: number of pdev ext stats event structures 4902 * @num_vdev_stats: number of vdev stats 4903 * @num_peer_stats: number of peer stats event structures 0 or max peers 4904 * @num_bcnflt_stats: number of beacon filter stats 4905 * @num_chan_stats: number of channel stats 4906 * @pdev_id: device id for the radio 4907 * @num_bcn_stats: number of beacon stats 4908 * @num_rssi_stats: number of rssi stats 4909 */ 4910 typedef struct { 4911 wmi_host_stats_id stats_id; 4912 uint32_t num_pdev_stats; 4913 uint32_t num_pdev_ext_stats; 4914 uint32_t num_vdev_stats; 4915 uint32_t num_peer_stats; 4916 uint32_t num_bcnflt_stats; 4917 uint32_t num_chan_stats; 4918 uint32_t pdev_id; 4919 uint32_t num_bcn_stats; 4920 uint32_t num_rssi_stats; 4921 } wmi_host_stats_event; 4922 4923 /** 4924 * struct wmi_host_peer_extd_stats - peer extd stats event structure 4925 * @peer_macaddr: Peer mac address 4926 * @inactive_time: inactive time in secs 4927 * @peer_chain_rssi: peer rssi 4928 * @rx_duration: RX duration 4929 * @peer_tx_bytes: TX bytes 4930 * @peer_rx_bytes: RX bytes 4931 * @last_tx_rate_code: Tx rate code of last frame 4932 * @last_tx_power: Tx power latest 4933 * @atf_tokens_allocated: atf tokens allocated 4934 * @atf_tokens_utilized: atf tokens utilized 4935 * @reserved: for future use 4936 */ 4937 typedef struct { 4938 wmi_host_mac_addr peer_macaddr; 4939 uint32_t inactive_time; 4940 uint32_t peer_chain_rssi; 4941 uint32_t rx_duration; 4942 uint32_t peer_tx_bytes; 4943 uint32_t peer_rx_bytes; 4944 uint32_t last_tx_rate_code; 4945 uint32_t last_tx_power; 4946 uint32_t atf_tokens_allocated; 4947 uint32_t atf_tokens_utilized; 4948 uint32_t reserved[4]; 4949 } wmi_host_peer_extd_stats; 4950 4951 /** 4952 * struct wmi_host_pdev_ext_stats - peer ext stats structure 4953 * @rx_rssi_comb: RX rssi 4954 * @rx_rssi_chain0: RX rssi chain 0 4955 * @rx_rssi_chain1: RX rssi chain 1 4956 * @rx_rssi_chain2: RX rssi chain 2 4957 * @rx_rssi_chain3: RX rssi chain 3 4958 * @rx_mcs: RX MCS array 4959 * @tx_mcs: TX MCS array 4960 * @ack_rssi: Ack rssi 4961 */ 4962 typedef struct { 4963 uint32_t rx_rssi_comb; 4964 uint32_t rx_rssi_chain0; 4965 uint32_t rx_rssi_chain1; 4966 uint32_t rx_rssi_chain2; 4967 uint32_t rx_rssi_chain3; 4968 uint32_t rx_mcs[10]; 4969 uint32_t tx_mcs[10]; 4970 uint32_t ack_rssi; 4971 } wmi_host_pdev_ext_stats; 4972 4973 /** 4974 * struct wmi_host_dbg_tx_stats - Debug stats 4975 * @comp_queued: Num HTT cookies queued to dispatch list 4976 * @comp_delivered: Num HTT cookies dispatched 4977 * @msdu_enqued: Num MSDU queued to WAL 4978 * @mpdu_enqued: Num MPDU queue to WAL 4979 * @wmm_drop: Num MSDUs dropped by WMM limit 4980 * @local_enqued: Num Local frames queued 4981 * @local_freed: Num Local frames done 4982 * @hw_queued: Num queued to HW 4983 * @hw_reaped: Num PPDU reaped from HW 4984 * @underrun: Num underruns 4985 * @hw_paused: HW Paused. 4986 * @tx_abort: Num PPDUs cleaned up in TX abort 4987 * @mpdus_requed: Num MPDUs requed by SW 4988 * @tx_ko: excessive retries 4989 * @tx_xretry: 4990 * @data_rc: data hw rate code 4991 * @self_triggers: Scheduler self triggers 4992 * @sw_retry_failure: frames dropped due to excessive sw retries 4993 * @illgl_rate_phy_err: illegal rate phy errors 4994 * @pdev_cont_xretry: wal pdev continuous xretry 4995 * @pdev_tx_timeout: wal pdev continuous xretry 4996 * @pdev_resets: wal pdev resets 4997 * @stateless_tid_alloc_failure: frames dropped due to non-availability of 4998 * stateless TIDs 4999 * @phy_underrun: PhY/BB underrun 5000 * @txop_ovf: MPDU is more than txop limit 5001 * @seq_posted: Number of Sequences posted 5002 * @seq_failed_queueing: Number of Sequences failed queueing 5003 * @seq_completed: Number of Sequences completed 5004 * @seq_restarted: Number of Sequences restarted 5005 * @mu_seq_posted: Number of MU Sequences posted 5006 * @mpdus_sw_flush: Num MPDUs flushed by SW, HWPAUSED, SW TXABORT 5007 * (Reset,channel change) 5008 * @mpdus_hw_filter: Num MPDUs filtered by HW, all filter condition 5009 * (TTL expired) 5010 * @mpdus_truncated: Num MPDUs truncated by PDG (TXOP, TBTT, 5011 * PPDU_duration based on rate, dyn_bw) 5012 * @mpdus_ack_failed: Num MPDUs that was tried but didn't receive ACK or BA 5013 * @mpdus_expired: Num MPDUs that was dropped du to expiry. 5014 * @mc_dropr: Num mc drops 5015 */ 5016 typedef struct { 5017 int32_t comp_queued; 5018 int32_t comp_delivered; 5019 int32_t msdu_enqued; 5020 int32_t mpdu_enqued; 5021 int32_t wmm_drop; 5022 int32_t local_enqued; 5023 int32_t local_freed; 5024 int32_t hw_queued; 5025 int32_t hw_reaped; 5026 int32_t underrun; 5027 uint32_t hw_paused; 5028 int32_t tx_abort; 5029 int32_t mpdus_requed; 5030 uint32_t tx_ko; 5031 uint32_t tx_xretry; 5032 uint32_t data_rc; 5033 uint32_t self_triggers; 5034 uint32_t sw_retry_failure; 5035 uint32_t illgl_rate_phy_err; 5036 uint32_t pdev_cont_xretry; 5037 uint32_t pdev_tx_timeout; 5038 uint32_t pdev_resets; 5039 uint32_t stateless_tid_alloc_failure; 5040 uint32_t phy_underrun; 5041 uint32_t txop_ovf; 5042 uint32_t seq_posted; 5043 uint32_t seq_failed_queueing; 5044 uint32_t seq_completed; 5045 uint32_t seq_restarted; 5046 uint32_t mu_seq_posted; 5047 int32_t mpdus_sw_flush; 5048 int32_t mpdus_hw_filter; 5049 int32_t mpdus_truncated; 5050 int32_t mpdus_ack_failed; 5051 int32_t mpdus_expired; 5052 uint32_t mc_drop; 5053 } wmi_host_dbg_tx_stats; 5054 5055 /** 5056 * struct wmi_host_dbg_rx_stats - RX Debug stats 5057 * @mid_ppdu_route_change: Cnts any change in ring routing mid-ppdu 5058 * @status_rcvd: Total number of statuses processed 5059 * @r0_frags: Extra frags on rings 0 5060 * @r1_frags: Extra frags on rings 1 5061 * @r2_frags: Extra frags on rings 2 5062 * @r3_frags: Extra frags on rings 3 5063 * @htt_msdus: MSDUs delivered to HTT 5064 * @htt_mpdus: MPDUs delivered to HTT 5065 * @loc_msdus: MSDUs delivered to local stack 5066 * @loc_mpdus: MPDUS delivered to local stack 5067 * @oversize_amsdu: AMSDUs that have more MSDUs than the status ring size 5068 * @phy_errs: Number of PHY errors 5069 * @phy_err_drop: Number of PHY errors drops 5070 * @mpdu_errs: Number of mpdu errors - FCS, MIC, ENC etc. 5071 * @pdev_rx_timeout: Number of rx inactivity timeouts 5072 * @rx_ovfl_errs: Number of rx overflow errors. 5073 */ 5074 typedef struct { 5075 int32_t mid_ppdu_route_change; 5076 int32_t status_rcvd; 5077 int32_t r0_frags; 5078 int32_t r1_frags; 5079 int32_t r2_frags; 5080 int32_t r3_frags; 5081 int32_t htt_msdus; 5082 int32_t htt_mpdus; 5083 int32_t loc_msdus; 5084 int32_t loc_mpdus; 5085 int32_t oversize_amsdu; 5086 int32_t phy_errs; 5087 int32_t phy_err_drop; 5088 int32_t mpdu_errs; 5089 uint32_t pdev_rx_timeout; 5090 int32_t rx_ovfl_errs; 5091 } wmi_host_dbg_rx_stats; 5092 5093 /** struct wmi_host_dbg_mem_stats - memory stats 5094 * @iram_free_size: IRAM free size on target 5095 * @dram_free_size: DRAM free size on target 5096 * @sram_free_size: SRAM free size on target 5097 */ 5098 typedef struct { 5099 uint32_t iram_free_size; 5100 uint32_t dram_free_size; 5101 /* Only Non-TLV */ 5102 uint32_t sram_free_size; 5103 } wmi_host_dbg_mem_stats; 5104 5105 typedef struct { 5106 /* Only TLV */ 5107 int32_t dummy;/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 5108 } wmi_host_dbg_peer_stats; 5109 5110 /** 5111 * struct wmi_host_dbg_stats - host debug stats 5112 * @tx: TX stats of type wmi_host_dbg_tx_stats 5113 * @rx: RX stats of type wmi_host_dbg_rx_stats 5114 * @mem: Memory stats of type wmi_host_dbg_mem_stats 5115 * @peer: peer stats of type wmi_host_dbg_peer_stats 5116 */ 5117 typedef struct { 5118 wmi_host_dbg_tx_stats tx; 5119 wmi_host_dbg_rx_stats rx; 5120 wmi_host_dbg_mem_stats mem; 5121 wmi_host_dbg_peer_stats peer; 5122 } wmi_host_dbg_stats; 5123 5124 /** 5125 * struct wmi_host_pdev_stats - PDEV stats 5126 * @chan_nf: Channel noise floor 5127 * @tx_frame_count: TX frame count 5128 * @rx_frame_count: RX frame count 5129 * @rx_clear_count: rx clear count 5130 * @cycle_count: cycle count 5131 * @phy_err_count: Phy error count 5132 * @chan_tx_pwr: Channel Tx Power 5133 * @pdev_stats: WAL dbg stats 5134 * @ackRcvBad: 5135 * @rtsBad: 5136 * @rtsGood: 5137 * @fcsBad: 5138 * @noBeacons: 5139 * @mib_int_count: 5140 */ 5141 typedef struct { 5142 int32_t chan_nf; 5143 uint32_t tx_frame_count; 5144 uint32_t rx_frame_count; 5145 uint32_t rx_clear_count; 5146 uint32_t cycle_count; 5147 uint32_t phy_err_count; 5148 uint32_t chan_tx_pwr; 5149 wmi_host_dbg_stats pdev_stats; 5150 uint32_t ackRcvBad; 5151 uint32_t rtsBad; 5152 uint32_t rtsGood; 5153 uint32_t fcsBad; 5154 uint32_t noBeacons; 5155 uint32_t mib_int_count; 5156 } wmi_host_pdev_stats; 5157 5158 5159 /** 5160 * struct wmi_unit_test_event - Structure corresponding to WMI Unit test event 5161 * @vdev_id: VDEV ID 5162 * @module_id: MODULE ID 5163 * @diag_token: Diag Token (the number that was generated in the unit-test cmd) 5164 * @flag: flag has 2 bits 0x1 indicates status, and 0x2 indicates done-bit 5165 * @payload_len: payload_len (blindly copied from payload_len field in WMI) 5166 * @buffer_len: actual number of data bytes in the variable data size TLV 5167 * buffer_len is likely to be the nearest multiple of 4 (from 5168 * payload_len). both buffer_len and payload_len need to be 5169 * passed to wifitool so that the driver can be agnostic 5170 * regarding these differences. 5171 * @buffer: data buffer 5172 */ 5173 typedef struct { 5174 uint32_t vdev_id; 5175 uint32_t module_id; 5176 uint32_t diag_token; 5177 uint32_t flag; 5178 uint32_t payload_len; 5179 uint32_t buffer_len; 5180 uint8_t buffer[1]; 5181 } wmi_unit_test_event; 5182 5183 5184 /** 5185 * struct wmi_host_snr_info - WMI host Signal to noise ration info 5186 * @bcn_snr: beacon SNR 5187 * @dat_snr: Data frames SNR 5188 */ 5189 typedef struct { 5190 int32_t bcn_snr; 5191 int32_t dat_snr; 5192 } wmi_host_snr_info; 5193 5194 #define WMI_HOST_MAX_TX_RATE_VALUES 10 /*Max Tx Rates */ 5195 #define WMI_HOST_MAX_RSSI_VALUES 10 /*Max Rssi values */ 5196 5197 /* The WLAN_MAX_AC macro cannot be changed without breaking 5198 * * WMI compatibility. 5199 * * The maximum value of access category 5200 * */ 5201 #define WMI_HOST_WLAN_MAX_AC 4 5202 5203 /* The WMI_HOST_MAX_CHAINS macro cannot be changed without breaking WMI 5204 * compatibility. 5205 * The maximum value of number of chains 5206 */ 5207 #define WMI_HOST_MAX_CHAINS 8 5208 5209 /** 5210 * struct wmi_host_vdev_stats - vdev stats structure 5211 * @vdev_id: unique id identifying the VDEV, generated by the caller 5212 * Rest all Only TLV 5213 * @vdev_snr: wmi_host_snr_info 5214 * @tx_frm_cnt: Total number of packets(per AC) that were successfully 5215 * transmitted (with and without retries, 5216 * including multi-cast, broadcast) 5217 * @rx_frm_cnt: Total number of packets that were successfully received 5218 * (after appropriate filter rules including multi-cast, broadcast) 5219 * @multiple_retry_cnt: The number of MSDU packets and MMPDU frames per AC 5220 * that the 802.11 station successfully transmitted after 5221 * more than one retransmission attempt 5222 * @fail_cnt: Total number packets(per AC) failed to transmit 5223 * @rts_fail_cnt: Total number of RTS/CTS sequence failures for transmission 5224 * of a packet 5225 * @rts_succ_cnt: Total number of RTS/CTS sequence success for transmission 5226 * of a packet 5227 * @rx_err_cnt: The receive error count. HAL will provide the 5228 * RxP FCS error global 5229 * @rx_discard_cnt: The sum of the receive error count and 5230 * dropped-receive-buffer error count (FCS error) 5231 * @ack_fail_cnt: Total number packets failed transmit because of no 5232 * ACK from the remote entity 5233 * @tx_rate_history:History of last ten transmit rate, in units of 500 kbit/sec 5234 * @bcn_rssi_history: History of last ten Beacon rssi of the connected Bss 5235 */ 5236 typedef struct { 5237 uint32_t vdev_id; 5238 /* Rest all Only TLV */ 5239 wmi_host_snr_info vdev_snr; 5240 uint32_t tx_frm_cnt[WMI_HOST_WLAN_MAX_AC]; 5241 uint32_t rx_frm_cnt; 5242 uint32_t multiple_retry_cnt[WMI_HOST_WLAN_MAX_AC]; 5243 uint32_t fail_cnt[WMI_HOST_WLAN_MAX_AC]; 5244 uint32_t rts_fail_cnt; 5245 uint32_t rts_succ_cnt; 5246 uint32_t rx_err_cnt; 5247 uint32_t rx_discard_cnt; 5248 uint32_t ack_fail_cnt; 5249 uint32_t tx_rate_history[WMI_HOST_MAX_TX_RATE_VALUES]; 5250 uint32_t bcn_rssi_history[WMI_HOST_MAX_RSSI_VALUES]; 5251 } wmi_host_vdev_stats; 5252 5253 /** 5254 * struct wmi_host_vdev_stats - vdev stats structure 5255 * @vdev_id: unique id identifying the VDEV, generated by the caller 5256 * @tx_bcn_succ_cnt: Total number of beacon frame transmitted successfully 5257 * @tx_bcn_outage_cnt: Total number of failed beacons 5258 */ 5259 typedef struct { 5260 uint32_t vdev_id; 5261 uint32_t tx_bcn_succ_cnt; 5262 uint32_t tx_bcn_outage_cnt; 5263 } wmi_host_bcn_stats; 5264 5265 /** 5266 * struct wmi_host_vdev_extd_stats - VDEV extended stats 5267 * @vdev_id: unique id identifying the VDEV, generated by the caller 5268 * @ppdu_aggr_cnt: No of Aggrs Queued to HW 5269 * @ppdu_noack: No of PPDU's not Acked includes both aggr and nonaggr's 5270 * @mpdu_queued: No of MPDU/Subframes's queued to HW in Aggregates 5271 * @ppdu_nonaggr_cnt: No of NonAggr/MPDU/Subframes's queued to HW 5272 * in Legacy NonAggregates 5273 * @mpdu_sw_requed: No of MPDU/Subframes's SW requeued includes 5274 * both Aggr and NonAggr 5275 * @mpdu_suc_retry: No of MPDU/Subframes's transmitted Successfully 5276 * after Single/mul HW retry 5277 * @mpdu_suc_multitry: No of MPDU/Subframes's transmitted Success 5278 * after Multiple HW retry 5279 * @mpdu_fail_retry: No of MPDU/Subframes's failed transmission 5280 * after Multiple HW retry 5281 * @reserved[13]: for future extensions set to 0x0 5282 */ 5283 typedef struct { 5284 uint32_t vdev_id; 5285 uint32_t ppdu_aggr_cnt; 5286 uint32_t ppdu_noack; 5287 uint32_t mpdu_queued; 5288 uint32_t ppdu_nonaggr_cnt; 5289 uint32_t mpdu_sw_requed; 5290 uint32_t mpdu_suc_retry; 5291 uint32_t mpdu_suc_multitry; 5292 uint32_t mpdu_fail_retry; 5293 uint32_t reserved[13]; 5294 } wmi_host_vdev_extd_stats; 5295 5296 /** 5297 * struct wmi_host_vdev_nac_rssi_event - VDEV nac rssi stats 5298 * @vdev_id: unique id identifying the VDEV, generated by the caller 5299 * @last_rssi: rssi 5300 * @avg_rssi: averge rssi 5301 * @rssi_seq_num: rssi sequence number 5302 */ 5303 struct wmi_host_vdev_nac_rssi_event { 5304 uint32_t vdev_id; 5305 uint32_t last_rssi; 5306 uint32_t avg_rssi; 5307 uint32_t rssi_seq_num; 5308 }; 5309 5310 5311 /** 5312 * struct wmi_host_per_chain_rssi_stats - VDEV nac rssi stats 5313 * @vdev_id: unique id identifying the VDEV, generated by the caller 5314 * @rssi_avg_beacon: per chain avg rssi for beacon 5315 * @rssi_avg_data: per chain avg rssi for data 5316 * @peer_macaddr: peer macaddr 5317 */ 5318 struct wmi_host_per_chain_rssi_stats { 5319 uint32_t vdev_id; 5320 int32_t rssi_avg_beacon[WMI_HOST_MAX_CHAINS]; 5321 int32_t rssi_avg_data[WMI_HOST_MAX_CHAINS]; 5322 wmi_host_mac_addr peer_macaddr; 5323 }; 5324 5325 /** 5326 * struct wmi_host_peer_stats - peer stats 5327 * @peer_macaddr: peer MAC address 5328 * @peer_rssi: rssi 5329 * @peer_rssi_seq_num: rssi sequence number 5330 * @peer_tx_rate: last tx data rate used for peer 5331 * @peer_rx_rate: last rx data rate used for peer 5332 * @currentper: Current PER 5333 * @retries: Retries happened during transmission 5334 * @txratecount: Maximum Aggregation Size 5335 * @max4msframelen: Max4msframelen of tx rates used 5336 * @totalsubframes: Total no of subframes 5337 * @txbytes: No of bytes transmitted to the client 5338 * @nobuffs[4]: Packet Loss due to buffer overflows 5339 * @excretries[4]: Packet Loss due to excessive retries 5340 * @peer_rssi_changed: how many times peer's RSSI changed by a 5341 * non-negligible amount 5342 */ 5343 typedef struct { 5344 wmi_host_mac_addr peer_macaddr; 5345 uint32_t peer_rssi; 5346 uint32_t peer_rssi_seq_num; 5347 uint32_t peer_tx_rate; 5348 uint32_t peer_rx_rate; 5349 uint32_t currentper; 5350 uint32_t retries; 5351 uint32_t txratecount; 5352 uint32_t max4msframelen; 5353 uint32_t totalsubframes; 5354 uint32_t txbytes; 5355 uint32_t nobuffs[4]; 5356 uint32_t excretries[4]; 5357 uint32_t peer_rssi_changed; 5358 } wmi_host_peer_stats; 5359 5360 typedef struct { 5361 uint32_t dummy; 5362 } wmi_host_bcnflt_stats; 5363 5364 /** 5365 * struct wmi_host_chan_stats - WMI chan stats 5366 * @chan_mhz: Primary channel freq of the channel for which stats are sent 5367 * @sampling_period_us: Time spent on the channel 5368 * @rx_clear_count: Aggregate duration over a sampling period for 5369 * which channel activity was observed 5370 * @tx_duration_us: Accumalation of the TX PPDU duration over a sampling period 5371 * @rx_duration_us: Accumalation of the RX PPDU duration over a sampling period 5372 */ 5373 typedef struct { 5374 uint32_t chan_mhz; 5375 uint32_t sampling_period_us; 5376 uint32_t rx_clear_count; 5377 uint32_t tx_duration_us; 5378 uint32_t rx_duration_us; 5379 } wmi_host_chan_stats; 5380 5381 #define WMI_EVENT_ID_INVALID 0 5382 /** 5383 * Host based ENUM IDs for events to abstract target enums for event_id 5384 */ 5385 typedef enum { 5386 wmi_service_ready_event_id = 0, 5387 wmi_ready_event_id, 5388 wmi_dbg_msg_event_id, 5389 wmi_scan_event_id, 5390 wmi_echo_event_id, 5391 wmi_update_stats_event_id, 5392 wmi_inst_rssi_stats_event_id, 5393 wmi_vdev_start_resp_event_id, 5394 wmi_vdev_standby_req_event_id, 5395 wmi_vdev_resume_req_event_id, 5396 wmi_vdev_stopped_event_id, 5397 wmi_peer_sta_kickout_event_id, 5398 wmi_host_swba_event_id, 5399 wmi_tbttoffset_update_event_id, 5400 wmi_mgmt_rx_event_id, 5401 wmi_chan_info_event_id, 5402 wmi_phyerr_event_id, 5403 wmi_roam_event_id, 5404 wmi_profile_match, 5405 wmi_debug_print_event_id, 5406 wmi_pdev_qvit_event_id, 5407 wmi_wlan_profile_data_event_id, 5408 wmi_rtt_meas_report_event_id, 5409 wmi_tsf_meas_report_event_id, 5410 wmi_rtt_error_report_event_id, 5411 wmi_rtt_keepalive_event_id, 5412 wmi_oem_cap_event_id, 5413 wmi_oem_meas_report_event_id, 5414 wmi_oem_report_event_id, 5415 wmi_nan_event_id, 5416 wmi_wow_wakeup_host_event_id, 5417 wmi_gtk_offload_status_event_id, 5418 wmi_gtk_rekey_fail_event_id, 5419 wmi_dcs_interference_event_id, 5420 wmi_pdev_tpc_config_event_id, 5421 wmi_csa_handling_event_id, 5422 wmi_gpio_input_event_id, 5423 wmi_peer_ratecode_list_event_id, 5424 wmi_generic_buffer_event_id, 5425 wmi_mcast_buf_release_event_id, 5426 wmi_mcast_list_ageout_event_id, 5427 wmi_vdev_get_keepalive_event_id, 5428 wmi_wds_peer_event_id, 5429 wmi_peer_sta_ps_statechg_event_id, 5430 wmi_pdev_fips_event_id, 5431 wmi_tt_stats_event_id, 5432 wmi_pdev_channel_hopping_event_id, 5433 wmi_pdev_ani_cck_level_event_id, 5434 wmi_pdev_ani_ofdm_level_event_id, 5435 wmi_pdev_reserve_ast_entry_event_id, 5436 wmi_pdev_nfcal_power_event_id, 5437 wmi_pdev_tpc_event_id, 5438 wmi_pdev_get_ast_info_event_id, 5439 wmi_pdev_temperature_event_id, 5440 wmi_pdev_nfcal_power_all_channels_event_id, 5441 wmi_pdev_bss_chan_info_event_id, 5442 wmi_mu_report_event_id, 5443 wmi_pdev_utf_event_id, 5444 wmi_pdev_dump_event_id, 5445 wmi_tx_pause_event_id, 5446 wmi_dfs_radar_event_id, 5447 wmi_pdev_l1ss_track_event_id, 5448 wmi_service_ready_ext_event_id, 5449 wmi_vdev_install_key_complete_event_id, 5450 wmi_vdev_mcc_bcn_intvl_change_req_event_id, 5451 wmi_vdev_tsf_report_event_id, 5452 wmi_peer_info_event_id, 5453 wmi_peer_tx_fail_cnt_thr_event_id, 5454 wmi_peer_estimated_linkspeed_event_id, 5455 wmi_peer_state_event_id, 5456 wmi_offload_bcn_tx_status_event_id, 5457 wmi_offload_prob_resp_tx_status_event_id, 5458 wmi_mgmt_tx_completion_event_id, 5459 wmi_tx_delba_complete_event_id, 5460 wmi_tx_addba_complete_event_id, 5461 wmi_ba_rsp_ssn_event_id, 5462 wmi_aggr_state_trig_event_id, 5463 wmi_roam_synch_event_id, 5464 wmi_roam_synch_frame_event_id, 5465 wmi_p2p_disc_event_id, 5466 wmi_p2p_noa_event_id, 5467 wmi_p2p_lo_stop_event_id, 5468 wmi_pdev_resume_event_id, 5469 wmi_d0_wow_disable_ack_event_id, 5470 wmi_wow_initial_wakeup_event_id, 5471 wmi_stats_ext_event_id, 5472 wmi_iface_link_stats_event_id, 5473 wmi_peer_link_stats_event_id, 5474 wmi_radio_link_stats_link, 5475 wmi_update_fw_mem_dump_event_id, 5476 wmi_diag_event_id_log_supported_event_id, 5477 wmi_nlo_match_event_id, 5478 wmi_nlo_scan_complete_event_id, 5479 wmi_apfind_event_id, 5480 wmi_passpoint_match_event_id, 5481 wmi_chatter_pc_query_event_id, 5482 wmi_pdev_ftm_intg_event_id, 5483 wmi_wlan_freq_avoid_event_id, 5484 wmi_thermal_mgmt_event_id, 5485 wmi_diag_container_event_id, 5486 wmi_host_auto_shutdown_event_id, 5487 wmi_update_whal_mib_stats_event_id, 5488 wmi_update_vdev_rate_stats_event_id, 5489 wmi_diag_event_id, 5490 wmi_unit_test_event_id, 5491 wmi_ocb_set_sched_event_id, 5492 wmi_dbg_mesg_flush_complete_event_id, 5493 wmi_rssi_breach_event_id, 5494 wmi_uploadh_event_id, 5495 wmi_captureh_event_id, 5496 wmi_rfkill_state_change_event_id, 5497 wmi_tdls_peer_event_id, 5498 wmi_batch_scan_enabled_event_id, 5499 wmi_batch_scan_result_event_id, 5500 wmi_lpi_result_event_id, 5501 wmi_lpi_status_event_id, 5502 wmi_lpi_handoff_event_id, 5503 wmi_extscan_start_stop_event_id, 5504 wmi_extscan_operation_event_id, 5505 wmi_extscan_table_usage_event_id, 5506 wmi_extscan_cached_results_event_id, 5507 wmi_extscan_wlan_change_results_event_id, 5508 wmi_extscan_hotlist_match_event_id, 5509 wmi_extscan_capabilities_event_id, 5510 wmi_extscan_hotlist_ssid_match_event_id, 5511 wmi_mdns_stats_event_id, 5512 wmi_sap_ofl_add_sta_event_id, 5513 wmi_sap_ofl_del_sta_event_id, 5514 wmi_ocb_set_config_resp_event_id, 5515 wmi_ocb_get_tsf_timer_resp_event_id, 5516 wmi_dcc_get_stats_resp_event_id, 5517 wmi_dcc_update_ndl_resp_event_id, 5518 wmi_dcc_stats_event_id, 5519 wmi_soc_set_hw_mode_resp_event_id, 5520 wmi_soc_hw_mode_transition_event_id, 5521 wmi_soc_set_dual_mac_config_resp_event_id, 5522 wmi_tx_data_traffic_ctrl_event_id, 5523 wmi_peer_tx_mu_txmit_count_event_id, 5524 wmi_peer_gid_userpos_list_event_id, 5525 wmi_pdev_check_cal_version_event_id, 5526 wmi_atf_peer_stats_event_id, 5527 wmi_peer_delete_response_event_id, 5528 wmi_pdev_csa_switch_count_status_event_id, 5529 wmi_reg_chan_list_cc_event_id, 5530 wmi_offchan_data_tx_completion_event, 5531 wmi_dfs_cac_complete_id, 5532 wmi_dfs_radar_detection_event_id, 5533 wmi_ext_tbttoffset_update_event_id, 5534 wmi_11d_new_country_event_id, 5535 wmi_get_arp_stats_req_id, 5536 wmi_service_available_event_id, 5537 wmi_update_rcpi_event_id, 5538 wmi_pdev_wds_entry_list_event_id, 5539 wmi_ndp_initiator_rsp_event_id, 5540 wmi_ndp_indication_event_id, 5541 wmi_ndp_confirm_event_id, 5542 wmi_ndp_responder_rsp_event_id, 5543 wmi_ndp_end_indication_event_id, 5544 wmi_ndp_end_rsp_event_id, 5545 wmi_ndl_schedule_update_event_id, 5546 wmi_oem_response_event_id, 5547 wmi_peer_stats_info_event_id, 5548 wmi_pdev_chip_power_stats_event_id, 5549 wmi_ap_ps_egap_info_event_id, 5550 wmi_peer_assoc_conf_event_id, 5551 wmi_vdev_delete_resp_event_id, 5552 wmi_apf_capability_info_event_id, 5553 wmi_vdev_encrypt_decrypt_data_rsp_event_id, 5554 wmi_report_rx_aggr_failure_event_id, 5555 wmi_pdev_chip_pwr_save_failure_detect_event_id, 5556 wmi_peer_antdiv_info_event_id, 5557 wmi_pdev_set_hw_mode_rsp_event_id, 5558 wmi_pdev_hw_mode_transition_event_id, 5559 wmi_pdev_set_mac_config_resp_event_id, 5560 wmi_coex_bt_activity_event_id, 5561 wmi_mgmt_tx_bundle_completion_event_id, 5562 wmi_radio_tx_power_level_stats_event_id, 5563 wmi_report_stats_event_id, 5564 wmi_dma_buf_release_event_id, 5565 wmi_sap_obss_detection_report_event_id, 5566 wmi_obss_color_collision_report_event_id, 5567 wmi_host_swfda_event_id, 5568 wmi_sar_get_limits_event_id, 5569 wmi_pdev_div_rssi_antid_event_id, 5570 #if defined(WLAN_DFS_PARTIAL_OFFLOAD) && defined(HOST_DFS_SPOOF_TEST) 5571 wmi_host_dfs_status_check_event_id, 5572 #endif 5573 wmi_twt_enable_complete_event_id, 5574 wmi_apf_get_vdev_work_memory_resp_event_id, 5575 5576 #ifdef OL_ATH_SMART_LOGGING 5577 wmi_debug_fatal_condition_eventid, 5578 #endif /* OL_ATH_SMART_LOGGING */ 5579 wmi_wlan_sar2_result_event_id, 5580 wmi_esp_estimate_event_id, 5581 wmi_events_max, 5582 } wmi_conv_event_id; 5583 5584 #define WMI_UNAVAILABLE_PARAM 0 5585 /** 5586 * Host based ENUM IDs for PDEV params to abstract target enums 5587 */ 5588 typedef enum { 5589 wmi_pdev_param_tx_chain_mask = 0, 5590 wmi_pdev_param_rx_chain_mask, 5591 wmi_pdev_param_txpower_limit2g, 5592 wmi_pdev_param_txpower_limit5g, 5593 wmi_pdev_param_txpower_scale, 5594 wmi_pdev_param_beacon_gen_mode, 5595 wmi_pdev_param_beacon_tx_mode, 5596 wmi_pdev_param_resmgr_offchan_mode, 5597 wmi_pdev_param_protection_mode, 5598 wmi_pdev_param_dynamic_bw, 5599 wmi_pdev_param_non_agg_sw_retry_th, 5600 wmi_pdev_param_agg_sw_retry_th, 5601 wmi_pdev_param_sta_kickout_th, 5602 wmi_pdev_param_ac_aggrsize_scaling, 5603 wmi_pdev_param_ltr_enable, 5604 wmi_pdev_param_ltr_ac_latency_be, 5605 wmi_pdev_param_ltr_ac_latency_bk, 5606 wmi_pdev_param_ltr_ac_latency_vi, 5607 wmi_pdev_param_ltr_ac_latency_vo, 5608 wmi_pdev_param_ltr_ac_latency_timeout, 5609 wmi_pdev_param_ltr_sleep_override, 5610 wmi_pdev_param_ltr_rx_override, 5611 wmi_pdev_param_ltr_tx_activity_timeout, 5612 wmi_pdev_param_l1ss_enable, 5613 wmi_pdev_param_dsleep_enable, 5614 wmi_pdev_param_pcielp_txbuf_flush, 5615 wmi_pdev_param_pcielp_txbuf_watermark, 5616 wmi_pdev_param_pcielp_txbuf_tmo_en, 5617 wmi_pdev_param_pcielp_txbuf_tmo_value, 5618 wmi_pdev_param_pdev_stats_update_period, 5619 wmi_pdev_param_vdev_stats_update_period, 5620 wmi_pdev_param_peer_stats_update_period, 5621 wmi_pdev_param_bcnflt_stats_update_period, 5622 wmi_pdev_param_pmf_qos, 5623 wmi_pdev_param_arp_ac_override, 5624 wmi_pdev_param_dcs, 5625 wmi_pdev_param_ani_enable, 5626 wmi_pdev_param_ani_poll_period, 5627 wmi_pdev_param_ani_listen_period, 5628 wmi_pdev_param_ani_ofdm_level, 5629 wmi_pdev_param_ani_cck_level, 5630 wmi_pdev_param_dyntxchain, 5631 wmi_pdev_param_proxy_sta, 5632 wmi_pdev_param_idle_ps_config, 5633 wmi_pdev_param_power_gating_sleep, 5634 wmi_pdev_param_aggr_burst, 5635 wmi_pdev_param_rx_decap_mode, 5636 wmi_pdev_param_fast_channel_reset, 5637 wmi_pdev_param_burst_dur, 5638 wmi_pdev_param_burst_enable, 5639 wmi_pdev_param_smart_antenna_default_antenna, 5640 wmi_pdev_param_igmpmld_override, 5641 wmi_pdev_param_igmpmld_tid, 5642 wmi_pdev_param_antenna_gain, 5643 wmi_pdev_param_rx_filter, 5644 wmi_pdev_set_mcast_to_ucast_tid, 5645 wmi_pdev_param_proxy_sta_mode, 5646 wmi_pdev_param_set_mcast2ucast_mode, 5647 wmi_pdev_param_set_mcast2ucast_buffer, 5648 wmi_pdev_param_remove_mcast2ucast_buffer, 5649 wmi_pdev_peer_sta_ps_statechg_enable, 5650 wmi_pdev_param_block_interbss, 5651 wmi_pdev_param_set_disable_reset_cmdid, 5652 wmi_pdev_param_set_msdu_ttl_cmdid, 5653 wmi_pdev_param_set_ppdu_duration_cmdid, 5654 wmi_pdev_param_txbf_sound_period_cmdid, 5655 wmi_pdev_param_set_promisc_mode_cmdid, 5656 wmi_pdev_param_set_burst_mode_cmdid, 5657 wmi_pdev_param_en_stats, 5658 wmi_pdev_param_mu_group_policy, 5659 wmi_pdev_param_noise_detection, 5660 wmi_pdev_param_noise_threshold, 5661 wmi_pdev_param_dpd_enable, 5662 wmi_pdev_param_set_mcast_bcast_echo, 5663 wmi_pdev_param_atf_strict_sch, 5664 wmi_pdev_param_atf_sched_duration, 5665 wmi_pdev_param_ant_plzn, 5666 wmi_pdev_param_mgmt_retry_limit, 5667 wmi_pdev_param_sensitivity_level, 5668 wmi_pdev_param_signed_txpower_2g, 5669 wmi_pdev_param_signed_txpower_5g, 5670 wmi_pdev_param_enable_per_tid_amsdu, 5671 wmi_pdev_param_enable_per_tid_ampdu, 5672 wmi_pdev_param_cca_threshold, 5673 wmi_pdev_param_rts_fixed_rate, 5674 wmi_pdev_param_cal_period, 5675 wmi_pdev_param_pdev_reset, 5676 wmi_pdev_param_wapi_mbssid_offset, 5677 wmi_pdev_param_arp_srcaddr, 5678 wmi_pdev_param_arp_dstaddr, 5679 wmi_pdev_param_txpower_decr_db, 5680 wmi_pdev_param_rx_batchmode, 5681 wmi_pdev_param_packet_aggr_delay, 5682 wmi_pdev_param_atf_obss_noise_sch, 5683 wmi_pdev_param_atf_obss_noise_scaling_factor, 5684 wmi_pdev_param_cust_txpower_scale, 5685 wmi_pdev_param_atf_dynamic_enable, 5686 wmi_pdev_param_atf_ssid_group_policy, 5687 wmi_pdev_param_rfkill_enable, 5688 wmi_pdev_param_hw_rfkill_config, 5689 wmi_pdev_param_low_power_rf_enable, 5690 wmi_pdev_param_l1ss_track, 5691 wmi_pdev_param_hyst_en, 5692 wmi_pdev_param_power_collapse_enable, 5693 wmi_pdev_param_led_sys_state, 5694 wmi_pdev_param_led_enable, 5695 wmi_pdev_param_audio_over_wlan_latency, 5696 wmi_pdev_param_audio_over_wlan_enable, 5697 wmi_pdev_param_whal_mib_stats_update_enable, 5698 wmi_pdev_param_vdev_rate_stats_update_period, 5699 wmi_pdev_param_cts_cbw, 5700 wmi_pdev_param_wnts_config, 5701 wmi_pdev_param_adaptive_early_rx_enable, 5702 wmi_pdev_param_adaptive_early_rx_min_sleep_slop, 5703 wmi_pdev_param_adaptive_early_rx_inc_dec_step, 5704 wmi_pdev_param_early_rx_fix_sleep_slop, 5705 wmi_pdev_param_bmiss_based_adaptive_bto_enable, 5706 wmi_pdev_param_bmiss_bto_min_bcn_timeout, 5707 wmi_pdev_param_bmiss_bto_inc_dec_step, 5708 wmi_pdev_param_bto_fix_bcn_timeout, 5709 wmi_pdev_param_ce_based_adaptive_bto_enable, 5710 wmi_pdev_param_ce_bto_combo_ce_value, 5711 wmi_pdev_param_tx_chain_mask_2g, 5712 wmi_pdev_param_rx_chain_mask_2g, 5713 wmi_pdev_param_tx_chain_mask_5g, 5714 wmi_pdev_param_rx_chain_mask_5g, 5715 wmi_pdev_param_tx_chain_mask_cck, 5716 wmi_pdev_param_tx_chain_mask_1ss, 5717 wmi_pdev_param_enable_btcoex, 5718 wmi_pdev_param_atf_peer_stats, 5719 wmi_pdev_param_btcoex_cfg, 5720 wmi_pdev_param_mesh_mcast_enable, 5721 wmi_pdev_param_tx_ack_timeout, 5722 wmi_pdev_param_soft_tx_chain_mask, 5723 wmi_pdev_param_cck_tx_enable, 5724 wmi_pdev_param_esp_indication_period, 5725 wmi_pdev_param_antenna_gain_half_db, 5726 wmi_pdev_param_max, 5727 } wmi_conv_pdev_params_id; 5728 5729 5730 /** 5731 * Host based ENUM IDs for VDEV params to abstract target enums 5732 */ 5733 typedef enum { 5734 wmi_vdev_param_rts_threshold = 0, 5735 wmi_vdev_param_fragmentation_threshold, 5736 wmi_vdev_param_beacon_interval, 5737 wmi_vdev_param_listen_interval, 5738 wmi_vdev_param_multicast_rate, 5739 wmi_vdev_param_mgmt_tx_rate, 5740 wmi_vdev_param_slot_time, 5741 wmi_vdev_param_preamble, 5742 wmi_vdev_param_swba_time, 5743 wmi_vdev_stats_update_period, 5744 wmi_vdev_pwrsave_ageout_time, 5745 wmi_vdev_host_swba_interval, 5746 wmi_vdev_param_dtim_period, 5747 wmi_vdev_oc_scheduler_air_time_limit, 5748 wmi_vdev_param_wds, 5749 wmi_vdev_param_atim_window, 5750 wmi_vdev_param_bmiss_count_max, 5751 wmi_vdev_param_bmiss_first_bcnt, 5752 wmi_vdev_param_bmiss_final_bcnt, 5753 wmi_vdev_param_feature_wmm, 5754 wmi_vdev_param_chwidth, 5755 wmi_vdev_param_chextoffset, 5756 wmi_vdev_param_disable_htprotection, 5757 wmi_vdev_param_sta_quickkickout, 5758 wmi_vdev_param_mgmt_rate, 5759 wmi_vdev_param_protection_mode, 5760 wmi_vdev_param_fixed_rate, 5761 wmi_vdev_param_sgi, 5762 wmi_vdev_param_ldpc, 5763 wmi_vdev_param_tx_stbc, 5764 wmi_vdev_param_rx_stbc, 5765 wmi_vdev_param_intra_bss_fwd, 5766 wmi_vdev_param_def_keyid, 5767 wmi_vdev_param_nss, 5768 wmi_vdev_param_bcast_data_rate, 5769 wmi_vdev_param_mcast_data_rate, 5770 wmi_vdev_param_mcast_indicate, 5771 wmi_vdev_param_dhcp_indicate, 5772 wmi_vdev_param_unknown_dest_indicate, 5773 wmi_vdev_param_ap_keepalive_min_idle_inactive_time_secs, 5774 wmi_vdev_param_ap_keepalive_max_idle_inactive_time_secs, 5775 wmi_vdev_param_ap_keepalive_max_unresponsive_time_secs, 5776 wmi_vdev_param_ap_enable_nawds, 5777 wmi_vdev_param_mcast2ucast_set, 5778 wmi_vdev_param_enable_rtscts, 5779 wmi_vdev_param_rc_num_retries, 5780 wmi_vdev_param_txbf, 5781 wmi_vdev_param_packet_powersave, 5782 wmi_vdev_param_drop_unencry, 5783 wmi_vdev_param_tx_encap_type, 5784 wmi_vdev_param_ap_detect_out_of_sync_sleeping_sta_time_secs, 5785 wmi_vdev_param_cabq_maxdur, 5786 wmi_vdev_param_mfptest_set, 5787 wmi_vdev_param_rts_fixed_rate, 5788 wmi_vdev_param_vht_sgimask, 5789 wmi_vdev_param_vht80_ratemask, 5790 wmi_vdev_param_early_rx_adjust_enable, 5791 wmi_vdev_param_early_rx_tgt_bmiss_num, 5792 wmi_vdev_param_early_rx_bmiss_sample_cycle, 5793 wmi_vdev_param_early_rx_slop_step, 5794 wmi_vdev_param_early_rx_init_slop, 5795 wmi_vdev_param_early_rx_adjust_pause, 5796 wmi_vdev_param_proxy_sta, 5797 wmi_vdev_param_meru_vc, 5798 wmi_vdev_param_rx_decap_type, 5799 wmi_vdev_param_bw_nss_ratemask, 5800 wmi_vdev_param_sensor_ap, 5801 wmi_vdev_param_beacon_rate, 5802 wmi_vdev_param_dtim_enable_cts, 5803 wmi_vdev_param_sta_kickout, 5804 wmi_vdev_param_tx_pwrlimit, 5805 wmi_vdev_param_snr_num_for_cal, 5806 wmi_vdev_param_roam_fw_offload, 5807 wmi_vdev_param_enable_rmc, 5808 wmi_vdev_param_ibss_max_bcn_lost_ms, 5809 wmi_vdev_param_max_rate, 5810 wmi_vdev_param_early_rx_drift_sample, 5811 wmi_vdev_param_set_ibss_tx_fail_cnt_thr, 5812 wmi_vdev_param_ebt_resync_timeout, 5813 wmi_vdev_param_aggr_trig_event_enable, 5814 wmi_vdev_param_is_ibss_power_save_allowed, 5815 wmi_vdev_param_is_power_collapse_allowed, 5816 wmi_vdev_param_is_awake_on_txrx_enabled, 5817 wmi_vdev_param_inactivity_cnt, 5818 wmi_vdev_param_txsp_end_inactivity_time_ms, 5819 wmi_vdev_param_dtim_policy, 5820 wmi_vdev_param_ibss_ps_warmup_time_secs, 5821 wmi_vdev_param_ibss_ps_1rx_chain_in_atim_window_enable, 5822 wmi_vdev_param_rx_leak_window, 5823 wmi_vdev_param_stats_avg_factor, 5824 wmi_vdev_param_disconnect_th, 5825 wmi_vdev_param_rtscts_rate, 5826 wmi_vdev_param_mcc_rtscts_protection_enable, 5827 wmi_vdev_param_mcc_broadcast_probe_enable, 5828 wmi_vdev_param_capabilities, 5829 wmi_vdev_param_mgmt_tx_power, 5830 wmi_vdev_param_atf_ssid_sched_policy, 5831 wmi_vdev_param_disable_dyn_bw_rts, 5832 wmi_vdev_param_ampdu_subframe_size_per_ac, 5833 wmi_vdev_param_he_dcm_enable, 5834 wmi_vdev_param_he_bss_color, 5835 wmi_vdev_param_he_range_ext_enable, 5836 wmi_vdev_param_set_hemu_mode, 5837 wmi_vdev_param_set_he_ltf, 5838 wmi_vdev_param_set_heop, 5839 wmi_vdev_param_disable_cabq, 5840 wmi_vdev_param_rate_dropdown_bmap, 5841 wmi_vdev_param_tx_power, 5842 wmi_vdev_param_set_ba_mode, 5843 wmi_vdev_param_autorate_misc_cfg, 5844 wmi_vdev_param_amsdu_subframe_size_per_ac, 5845 wmi_vdev_param_set_he_sounding_mode, 5846 5847 wmi_vdev_param_max, 5848 } wmi_conv_vdev_param_id; 5849 5850 /** 5851 * Host based ENUM IDs for service bits to abstract target enums 5852 */ 5853 typedef enum { 5854 wmi_service_beacon_offload = 0, 5855 wmi_service_scan_offload, 5856 wmi_service_roam_offload, 5857 wmi_service_bcn_miss_offload, 5858 wmi_service_sta_pwrsave, 5859 wmi_service_sta_advanced_pwrsave, 5860 wmi_service_ap_uapsd, 5861 wmi_service_ap_dfs, 5862 wmi_service_11ac, 5863 wmi_service_blockack, 5864 wmi_service_phyerr, 5865 wmi_service_bcn_filter, 5866 wmi_service_rtt, 5867 wmi_service_ratectrl, 5868 wmi_service_wow, 5869 wmi_service_ratectrl_cache, 5870 wmi_service_iram_tids, 5871 wmi_service_burst, 5872 wmi_service_smart_antenna_sw_support, 5873 wmi_service_gtk_offload, 5874 wmi_service_scan_sch, 5875 wmi_service_csa_offload, 5876 wmi_service_chatter, 5877 wmi_service_coex_freqavoid, 5878 wmi_service_packet_power_save, 5879 wmi_service_force_fw_hang, 5880 wmi_service_smart_antenna_hw_support, 5881 wmi_service_gpio, 5882 wmi_sta_uapsd_basic_auto_trig, 5883 wmi_sta_uapsd_var_auto_trig, 5884 wmi_service_sta_keep_alive, 5885 wmi_service_tx_encap, 5886 wmi_service_ap_ps_detect_out_of_sync, 5887 wmi_service_early_rx, 5888 wmi_service_enhanced_proxy_sta, 5889 wmi_service_tt, 5890 wmi_service_atf, 5891 wmi_service_peer_caching, 5892 wmi_service_coex_gpio, 5893 wmi_service_aux_spectral_intf, 5894 wmi_service_aux_chan_load_intf, 5895 wmi_service_bss_channel_info_64, 5896 wmi_service_ext_res_cfg_support, 5897 wmi_service_mesh, 5898 wmi_service_restrt_chnl_support, 5899 wmi_service_roam_scan_offload, 5900 wmi_service_arpns_offload, 5901 wmi_service_nlo, 5902 wmi_service_sta_dtim_ps_modulated_dtim, 5903 wmi_service_sta_smps, 5904 wmi_service_fwtest, 5905 wmi_service_sta_wmmac, 5906 wmi_service_tdls, 5907 wmi_service_mcc_bcn_interval_change, 5908 wmi_service_adaptive_ocs, 5909 wmi_service_ba_ssn_support, 5910 wmi_service_filter_ipsec_natkeepalive, 5911 wmi_service_wlan_hb, 5912 wmi_service_lte_ant_share_support, 5913 wmi_service_batch_scan, 5914 wmi_service_qpower, 5915 wmi_service_plmreq, 5916 wmi_service_thermal_mgmt, 5917 wmi_service_rmc, 5918 wmi_service_mhf_offload, 5919 wmi_service_coex_sar, 5920 wmi_service_bcn_txrate_override, 5921 wmi_service_nan, 5922 wmi_service_l1ss_stat, 5923 wmi_service_estimate_linkspeed, 5924 wmi_service_obss_scan, 5925 wmi_service_tdls_offchan, 5926 wmi_service_tdls_uapsd_buffer_sta, 5927 wmi_service_tdls_uapsd_sleep_sta, 5928 wmi_service_ibss_pwrsave, 5929 wmi_service_lpass, 5930 wmi_service_extscan, 5931 wmi_service_d0wow, 5932 wmi_service_hsoffload, 5933 wmi_service_roam_ho_offload, 5934 wmi_service_rx_full_reorder, 5935 wmi_service_dhcp_offload, 5936 wmi_service_sta_rx_ipa_offload_support, 5937 wmi_service_mdns_offload, 5938 wmi_service_sap_auth_offload, 5939 wmi_service_dual_band_simultaneous_support, 5940 wmi_service_ocb, 5941 wmi_service_ap_arpns_offload, 5942 wmi_service_per_band_chainmask_support, 5943 wmi_service_packet_filter_offload, 5944 wmi_service_mgmt_tx_htt, 5945 wmi_service_mgmt_tx_wmi, 5946 wmi_service_ext_msg, 5947 wmi_service_mawc, 5948 5949 wmi_service_peer_stats, 5950 wmi_service_mesh_11s, 5951 wmi_service_periodic_chan_stat_support, 5952 wmi_service_tx_mode_push_only, 5953 wmi_service_tx_mode_push_pull, 5954 wmi_service_tx_mode_dynamic, 5955 wmi_service_check_cal_version, 5956 wmi_service_btcoex_duty_cycle, 5957 wmi_service_4_wire_coex_support, 5958 wmi_service_multiple_vdev_restart, 5959 wmi_service_peer_assoc_conf, 5960 wmi_service_egap, 5961 wmi_service_sta_pmf_offload, 5962 wmi_service_unified_wow_capability, 5963 wmi_service_enterprise_mesh, 5964 wmi_service_apf_offload, 5965 wmi_service_sync_delete_cmds, 5966 wmi_service_ratectrl_limit_max_min_rates, 5967 wmi_service_nan_data, 5968 wmi_service_nan_rtt, 5969 wmi_service_11ax, 5970 wmi_service_deprecated_replace, 5971 wmi_service_tdls_conn_tracker_in_host_mode, 5972 wmi_service_enhanced_mcast_filter, 5973 wmi_service_half_rate_quarter_rate_support, 5974 wmi_service_vdev_rx_filter, 5975 wmi_service_p2p_listen_offload_support, 5976 wmi_service_mark_first_wakeup_packet, 5977 wmi_service_multiple_mcast_filter_set, 5978 wmi_service_host_managed_rx_reorder, 5979 wmi_service_flash_rdwr_support, 5980 wmi_service_wlan_stats_report, 5981 wmi_service_tx_msdu_id_new_partition_support, 5982 wmi_service_dfs_phyerr_offload, 5983 wmi_service_rcpi_support, 5984 wmi_service_fw_mem_dump_support, 5985 wmi_service_peer_stats_info, 5986 wmi_service_regulatory_db, 5987 wmi_service_11d_offload, 5988 wmi_service_hw_data_filtering, 5989 wmi_service_pkt_routing, 5990 wmi_service_offchan_tx_wmi, 5991 wmi_service_chan_load_info, 5992 wmi_service_extended_nss_support, 5993 wmi_service_ack_timeout, 5994 wmi_service_widebw_scan, 5995 wmi_service_bcn_offload_start_stop_support, 5996 wmi_service_offchan_data_tid_support, 5997 wmi_service_support_dma, 5998 wmi_service_8ss_tx_bfee, 5999 wmi_service_fils_support, 6000 wmi_service_mawc_support, 6001 wmi_service_wow_wakeup_by_timer_pattern, 6002 wmi_service_11k_neighbour_report_support, 6003 wmi_service_ap_obss_detection_offload, 6004 wmi_service_bss_color_offload, 6005 wmi_service_gmac_offload_support, 6006 wmi_service_host_dfs_check_support, 6007 wmi_service_dual_beacon_on_single_mac_scc_support, 6008 wmi_service_dual_beacon_on_single_mac_mcc_support, 6009 wmi_service_twt_requestor, 6010 wmi_service_twt_responder, 6011 wmi_service_listen_interval_offload_support, 6012 6013 #ifdef OL_ATH_SMART_LOGGING 6014 wmi_service_smart_logging_support, 6015 #endif 6016 wmi_services_max, 6017 } wmi_conv_service_ids; 6018 #define WMI_SERVICE_UNAVAILABLE 0xFFFF 6019 6020 /** 6021 * enum WMI_DBG_PARAM - Debug params 6022 * @WMI_DBGLOG_LOG_LEVEL: Set the loglevel 6023 * @WMI_DBGLOG_VAP_ENABLE: Enable VAP level debug 6024 * @WMI_DBGLOG_VAP_DISABLE: Disable VAP level debug 6025 * @WMI_DBGLOG_MODULE_ENABLE: Enable MODULE level debug 6026 * @WMI_DBGLOG_MODULE_DISABLE: Disable MODULE level debug 6027 * @WMI_DBGLOG_MOD_LOG_LEVEL: Enable MODULE level debug 6028 * @WMI_DBGLOG_TYPE: set type of the debug output 6029 * @WMI_DBGLOG_REPORT_ENABLE: Enable Disable debug 6030 */ 6031 typedef enum { 6032 WMI_DBGLOG_LOG_LEVEL = 0x1, 6033 WMI_DBGLOG_VAP_ENABLE, 6034 WMI_DBGLOG_VAP_DISABLE, 6035 WMI_DBGLOG_MODULE_ENABLE, 6036 WMI_DBGLOG_MODULE_DISABLE, 6037 WMI_DBGLOG_MOD_LOG_LEVEL, 6038 WMI_DBGLOG_TYPE, 6039 WMI_DBGLOG_REPORT_ENABLE 6040 } WMI_DBG_PARAM; 6041 6042 /** 6043 * struct wmi_host_fw_ver - FW version in non-tlv target 6044 * @sw_version: Versin info 6045 * @sw_version_1: Second dword of version 6046 */ 6047 struct wmi_host_fw_ver { 6048 uint32_t sw_version; 6049 uint32_t sw_version_1; 6050 }; 6051 6052 /** 6053 * struct wmi_host_fw_abi_ver - FW version in non-tlv target 6054 * @sw_version: Versin info 6055 * @abi_version: ABI version 6056 */ 6057 struct wmi_host_fw_abi_ver { 6058 uint32_t sw_version; 6059 uint32_t abi_version; 6060 }; 6061 6062 /** 6063 * struct target_resource_config - Resource config sent from host to target 6064 * abstracted out to include union of both configs 6065 * @num_vdevs: Number vdevs configured 6066 * @num_peers: Number of peers 6067 * @num_active_peers: Number of active peers for peer cache 6068 * @num_offload_peers: Number of offload peers 6069 * @num_offload_reorder_buffs: number of offload reorder buffs 6070 * @num_peer_keys: number of peer keys 6071 * @num_tids: number of tids 6072 * @ast_skid_limit: AST skid limit 6073 * @tx_chain_mask: TX chain mask 6074 * @rx_chain_mask: RX chain mask 6075 * @rx_timeout_pri: RX reorder timeout per AC 6076 * @rx_decap_mode: RX decap mode 6077 * @scan_max_pending_req: Scan mac pending req 6078 * @bmiss_offload_max_vdev: Beacom miss offload max vdevs 6079 * @roam_offload_max_vdev: Roam offload max vdevs 6080 * @roam_offload_max_ap_profiles: roam offload max ap profiles 6081 * @num_mcast_groups: num mcast groups 6082 * @num_mcast_table_elems: number of macst table elems 6083 * @mcast2ucast_mode: mcast enhance mode 6084 * @tx_dbg_log_size: DBG log buf size 6085 * @num_wds_entries: number of WDS entries 6086 * @dma_burst_size: DMA burst size. 6087 * @mac_aggr_delim: Mac aggr delim 6088 * @rx_skip_defrag_timeout_dup_detection_check: Defrag dup check in host? 6089 * @vow_config: vow configuration 6090 * @gtk_offload_max_vdev: Max vdevs for GTK offload 6091 * @num_msdu_desc: Number of msdu desc 6092 * @max_frag_entries: Max frag entries 6093 * End common 6094 * @max_peer_ext_stats: Max peer EXT stats 6095 * @smart_ant_cap: Smart antenna capabilities 6096 * @BK_Minfree: BIN configuration for BK traffic 6097 * @BE_Minfree: BIN configuration for BE traffic 6098 * @VI_Minfree: BIN configuration for VI traffic 6099 * @VO_Minfree: BIN configuration for VO traffic 6100 * @rx_batchmode: RX batch mode 6101 * @tt_support: Thermal throttling support 6102 * @atf_config: ATF config 6103 * @mgmt_comp_evt_bundle_support: bundle support required for mgmt complete evt 6104 * @tx_msdu_new_partition_id_support: new partiition id support for tx msdu 6105 * @iphdr_pad_config: ipheader pad config 6106 * @qwrap_config: Qwrap configuration 6107 * @alloc_frag_desc_for_data_pkt: Frag desc for data 6108 * Added in MCL 6109 * @num_tdls_vdevs: 6110 * @num_tdls_conn_table_entries: 6111 * @beacon_tx_offload_max_vdev: 6112 * @num_multicast_filter_entries: 6113 * @num_wow_filters: 6114 * @num_keep_alive_pattern: 6115 * @keep_alive_pattern_size: 6116 * @max_tdls_concurrent_sleep_sta: 6117 * @max_tdls_concurrent_buffer_sta: 6118 * @wmi_send_separate: 6119 * @num_ocb_vdevs: 6120 * @num_ocb_channels: 6121 * @num_ocb_schedules: 6122 * @num_packet_filters: maximum number of packet filter rules to support 6123 * @num_max_sta_vdevs: maximum number of concurrent station vdevs to support 6124 * @num_ns_ext_tuples_cfg: 6125 * @apf_instruction_size: 6126 * @max_bssid_rx_filters: 6127 * @use_pdev_id: 6128 * @max_num_dbs_scan_duty_cycle: max dbs can duty cycle value 6129 * @cce_disable: disable cce component 6130 * @twt_ap_pdev_count: Number of MAC on which AP TWT feature is supported 6131 * @twt_ap_sta_count: Max no of STA with which TWT sessions can be formed 6132 * by the AP 6133 */ 6134 typedef struct { 6135 uint32_t num_vdevs; 6136 uint32_t num_peers; 6137 uint32_t num_active_peers; 6138 uint32_t num_offload_peers; 6139 uint32_t num_offload_reorder_buffs; 6140 uint32_t num_peer_keys; 6141 uint32_t num_tids; 6142 uint32_t ast_skid_limit; 6143 uint32_t tx_chain_mask; 6144 uint32_t rx_chain_mask; 6145 uint32_t rx_timeout_pri[4]; 6146 uint32_t rx_decap_mode; 6147 uint32_t scan_max_pending_req; 6148 uint32_t bmiss_offload_max_vdev; 6149 uint32_t roam_offload_max_vdev; 6150 uint32_t roam_offload_max_ap_profiles; 6151 uint32_t num_mcast_groups; 6152 uint32_t num_mcast_table_elems; 6153 uint32_t mcast2ucast_mode; 6154 uint32_t tx_dbg_log_size; 6155 uint32_t num_wds_entries; 6156 uint32_t dma_burst_size; 6157 uint32_t mac_aggr_delim; 6158 uint32_t rx_skip_defrag_timeout_dup_detection_check; 6159 uint32_t vow_config; 6160 uint32_t gtk_offload_max_vdev; 6161 uint32_t num_msdu_desc; /* Number of msdu desc */ 6162 uint32_t max_frag_entries; 6163 uint32_t scheduler_params; 6164 /* End common */ 6165 6166 /* Added for Beeliner */ 6167 uint32_t max_peer_ext_stats; 6168 uint32_t smart_ant_cap; 6169 uint32_t BK_Minfree; 6170 uint32_t BE_Minfree; 6171 uint32_t VI_Minfree; 6172 uint32_t VO_Minfree; 6173 uint32_t rx_batchmode; 6174 uint32_t tt_support; 6175 uint32_t atf_config:1, 6176 mgmt_comp_evt_bundle_support:1, 6177 tx_msdu_new_partition_id_support:1; 6178 uint32_t iphdr_pad_config; 6179 uint32_t 6180 qwrap_config:16, 6181 alloc_frag_desc_for_data_pkt:16; 6182 6183 /* Added in MCL */ 6184 uint32_t num_tdls_vdevs; 6185 uint32_t num_tdls_conn_table_entries; 6186 uint32_t beacon_tx_offload_max_vdev; 6187 uint32_t num_multicast_filter_entries; 6188 uint32_t num_wow_filters; 6189 uint32_t num_keep_alive_pattern; 6190 uint32_t keep_alive_pattern_size; 6191 uint32_t max_tdls_concurrent_sleep_sta; 6192 uint32_t max_tdls_concurrent_buffer_sta; 6193 uint32_t wmi_send_separate; 6194 uint32_t num_ocb_vdevs; 6195 uint32_t num_ocb_channels; 6196 uint32_t num_ocb_schedules; 6197 uint32_t num_packet_filters; 6198 uint32_t num_max_sta_vdevs; 6199 uint32_t num_ns_ext_tuples_cfg; 6200 uint32_t apf_instruction_size; 6201 uint32_t max_bssid_rx_filters; 6202 uint32_t use_pdev_id; 6203 uint32_t max_num_dbs_scan_duty_cycle; 6204 bool cce_disable; 6205 uint32_t twt_ap_pdev_count; 6206 uint32_t twt_ap_sta_count; 6207 } target_resource_config; 6208 6209 /** 6210 * struct wds_addr_event - WDS addr event structure 6211 * @event_type: event type add/delete 6212 * @peer_mac: peer mac 6213 * @dest_mac: destination mac address 6214 * @vdev_id: vdev id 6215 */ 6216 typedef struct { 6217 uint32_t event_type[4]; 6218 u_int8_t peer_mac[IEEE80211_ADDR_LEN]; 6219 u_int8_t dest_mac[IEEE80211_ADDR_LEN]; 6220 uint32_t vdev_id; 6221 } wds_addr_event_t; 6222 /** 6223 * Enum replicated for host abstraction with FW 6224 */ 6225 typedef enum { 6226 /* Event respose of START CMD */ 6227 WMI_HOST_VDEV_START_RESP_EVENT = 0, 6228 /* Event respose of RESTART CMD */ 6229 WMI_HOST_VDEV_RESTART_RESP_EVENT, 6230 } WMI_HOST_START_EVENT_PARAM; 6231 6232 /** 6233 * struct wmi_host_vdev_start_resp - VDEV start response 6234 * @vdev_id: vdev id 6235 * @requestor_id: requestor id that requested the VDEV start request 6236 * @resp_type: Respose of Event type START/RESTART 6237 * @status: status of the response 6238 * @chain_mask: Vdev chain mask 6239 * @smps_mode: Vdev mimo power save mode 6240 * @mac_id: mac_id field contains the MAC identifier that the 6241 * VDEV is bound to. The valid range is 0 to (num_macs-1). 6242 * @cfgd_tx_streams: Configured Transmit Streams 6243 * @cfgd_rx_streams: Configured Receive Streams 6244 */ 6245 typedef struct { 6246 uint32_t vdev_id; 6247 uint32_t requestor_id; 6248 WMI_HOST_START_EVENT_PARAM resp_type; 6249 uint32_t status; 6250 uint32_t chain_mask; 6251 uint32_t smps_mode; 6252 uint32_t mac_id; 6253 uint32_t cfgd_tx_streams; 6254 uint32_t cfgd_rx_streams; 6255 } wmi_host_vdev_start_resp; 6256 6257 /** 6258 * struct wmi_host_vdev_delete_resp - VDEV delete response 6259 * @vdev_id: vdev id 6260 */ 6261 struct wmi_host_vdev_delete_resp { 6262 uint32_t vdev_id; 6263 }; 6264 6265 /** 6266 * struct wmi_host_roam_event - host roam event param 6267 * @vdev_id: vdev id 6268 * @reason: roam reason 6269 * @rssi: RSSI 6270 */ 6271 typedef struct { 6272 uint32_t vdev_id; 6273 uint32_t reason; 6274 uint32_t rssi; 6275 } wmi_host_roam_event; 6276 6277 /** 6278 * ENUM wmi_host_scan_event_type - Scan event type 6279 */ 6280 enum wmi_host_scan_event_type { 6281 WMI_HOST_SCAN_EVENT_STARTED = 0x1, 6282 WMI_HOST_SCAN_EVENT_COMPLETED = 0x2, 6283 WMI_HOST_SCAN_EVENT_BSS_CHANNEL = 0x4, 6284 WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, 6285 WMI_HOST_SCAN_EVENT_DEQUEUED = 0x10, 6286 WMI_HOST_SCAN_EVENT_PREEMPTED = 0x20, 6287 WMI_HOST_SCAN_EVENT_START_FAILED = 0x40, 6288 WMI_HOST_SCAN_EVENT_RESTARTED = 0x80, 6289 WMI_HOST_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = 0x100, 6290 WMI_HOST_SCAN_EVENT_INVALID = 0x200, 6291 WMI_HOST_SCAN_EVENT_GPIO_TIMEOUT = 0x400, 6292 WMI_HOST_SCAN_EVENT_MAX = 0x8000 6293 }; 6294 6295 /** 6296 * ENUM wmi_host_scan_completion_reason - Scan completion event type 6297 */ 6298 enum wmi_host_scan_completion_reason { 6299 /** scan related events */ 6300 WMI_HOST_SCAN_REASON_NONE = 0xFF, 6301 WMI_HOST_SCAN_REASON_COMPLETED = 0, 6302 WMI_HOST_SCAN_REASON_CANCELLED = 1, 6303 WMI_HOST_SCAN_REASON_PREEMPTED = 2, 6304 WMI_HOST_SCAN_REASON_TIMEDOUT = 3, 6305 WMI_HOST_SCAN_REASON_INTERNAL_FAILURE = 4, 6306 WMI_HOST_SCAN_REASON_MAX, 6307 }; 6308 6309 /** 6310 * struct wmi_host_scan_event - Scan event response from target 6311 * @event: event type 6312 * @reason: Reason for event 6313 * @channel_freq: channel frequency 6314 * @requestor: requestor id 6315 * @scan_id: scan id 6316 * @vdev_id: vdev id 6317 */ 6318 typedef struct { 6319 uint32_t event; 6320 uint32_t reason; 6321 uint32_t channel_freq; 6322 uint32_t requestor; 6323 uint32_t scan_id; 6324 uint32_t vdev_id; 6325 } wmi_host_scan_event; 6326 6327 /** 6328 * struct wmi_host_pdev_reserve_ast_entry_event - Reserve AST entry 6329 * @result: result 6330 */ 6331 typedef struct { 6332 uint32_t result; 6333 } wmi_host_pdev_reserve_ast_entry_event; 6334 6335 /** 6336 * struct wmi_host_mcast_ageout_entry - mcast aged-out entry 6337 * @grp_addr: IPv4/6 mcast group addr 6338 * @vdev_id: vdev id 6339 */ 6340 typedef struct { 6341 uint8_t grp_addr[16]; 6342 uint32_t vdev_id; 6343 } wmi_host_mcast_ageout_entry; 6344 6345 /** 6346 * struct wmi_host_mcast_list_ageout_event - List of mcast entry aged-out 6347 * @num_entry: Number of mcast entries timed-out 6348 * @entry: List of wmi_host_mcast_ageout_entry 6349 */ 6350 typedef struct { 6351 uint32_t num_entry; 6352 wmi_host_mcast_ageout_entry entry[1]; 6353 } wmi_host_mcast_list_ageout_event; 6354 6355 /** 6356 * struct wmi_host_pdev_nfcal_power_all_channels_event - NF cal event data 6357 * @nfdbr: 6358 * chan[0 ~ 7]: {NFCalPower_chain0, NFCalPower_chain1, 6359 * NFCalPower_chain2, NFCalPower_chain3, 6360 * NFCalPower_chain4, NFCalPower_chain5, 6361 * NFCalPower_chain6, NFCalPower_chain7}, 6362 * @nfdbm: 6363 * chan[0 ~ 7]: {NFCalPower_chain0, NFCalPower_chain1, 6364 * NFCalPower_chain2, NFCalPower_chain3, 6365 * NFCalPower_chain4, NFCalPower_chain5, 6366 * NFCalPower_chain6, NFCalPower_chain7}, 6367 * @freqnum: 6368 * chan[0 ~ 7]: frequency number 6369 * @pdev_id: pdev_id 6370 */ 6371 typedef struct { 6372 int8_t nfdbr[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS]; 6373 int8_t nfdbm[WMI_HOST_RXG_CAL_CHAN_MAX * WMI_HOST_MAX_NUM_CHAINS]; 6374 uint32_t freqnum[WMI_HOST_RXG_CAL_CHAN_MAX]; 6375 uint32_t pdev_id; 6376 } wmi_host_pdev_nfcal_power_all_channels_event; 6377 6378 /** 6379 * enum wmi_host_pdev_tpc_event_offset: offsets of TPC events 6380 * @WMI_HOST_TX_POWER_MAX: offset of max tx power 6381 * @WMI_HOST_TX_POWER_MIN: offset of min tx power 6382 * @WMI_HOST_TX_POWER_LEN: size of tpc values 6383 */ 6384 enum wmi_host_pdev_tpc_event_offset { 6385 WMI_HOST_TX_POWER_MAX, 6386 WMI_HOST_TX_POWER_MIN, 6387 WMI_HOST_TX_POWER_LEN, 6388 }; 6389 6390 /** 6391 * struct wmi_host_pdev_tpc_event - WMI host pdev TPC event 6392 * @pdev_id: pdev_id 6393 * @tpc: 6394 */ 6395 typedef struct { 6396 uint32_t pdev_id; 6397 int32_t tpc[WMI_HOST_TX_POWER_LEN]; 6398 } wmi_host_pdev_tpc_event; 6399 6400 /** 6401 * struct wmi_host_pdev_generic_buffer_event 6402 * @buf_type: Buffer type 6403 * @frag_id: Frag id 6404 * @more_frag: more frags pending 6405 * @buf_len: buffer length 6406 * @buf_info: variable length buffer 6407 */ 6408 typedef struct { 6409 uint32_t buf_type; 6410 uint32_t frag_id; 6411 uint32_t more_frag; 6412 uint32_t buf_len; 6413 uint32_t buf_info[1]; 6414 } wmi_host_pdev_generic_buffer_event; 6415 /** 6416 * Enum for host buffer event 6417 */ 6418 enum { 6419 WMI_HOST_BUFFER_TYPE_RATEPWR_TABLE, 6420 WMI_HOST_BUFFER_TYPE_CTL_TABLE, 6421 }; 6422 6423 /** 6424 * struct wmi_host_pdev_tpc_config_event - host pdev tpc config event 6425 * @pdev_id: pdev_id 6426 * @regDomain: 6427 * @chanFreq: 6428 * @phyMode: 6429 * @twiceAntennaReduction: 6430 * @twiceMaxRDPower: 6431 * @twiceAntennaGain: 6432 * @powerLimit: 6433 * @rateMax: 6434 * @numTxChain: 6435 * @ctl: 6436 * @flags: 6437 * @maxRegAllowedPower: 6438 * @maxRegAllowedPowerAGCDD: 6439 * @maxRegAllowedPowerAGSTBC: 6440 * @maxRegAllowedPowerAGTXBF: 6441 * @ratesArray: 6442 */ 6443 typedef struct { 6444 uint32_t pdev_id; 6445 uint32_t regDomain; 6446 uint32_t chanFreq; 6447 uint32_t phyMode; 6448 uint32_t twiceAntennaReduction; 6449 uint32_t twiceMaxRDPower; 6450 int32_t twiceAntennaGain; 6451 uint32_t powerLimit; 6452 uint32_t rateMax; 6453 uint32_t numTxChain; 6454 uint32_t ctl; 6455 uint32_t flags; 6456 int8_t maxRegAllowedPower[WMI_HOST_TPC_TX_NUM_CHAIN]; 6457 int8_t maxRegAllowedPowerAGCDD[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; 6458 int8_t maxRegAllowedPowerAGSTBC[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; 6459 int8_t maxRegAllowedPowerAGTXBF[WMI_HOST_TPC_TX_NUM_CHAIN][WMI_HOST_TPC_TX_NUM_CHAIN]; 6460 uint8_t ratesArray[WMI_HOST_TPC_RATE_MAX]; 6461 } wmi_host_pdev_tpc_config_event; 6462 /** 6463 * Enums for TPC event 6464 */ 6465 typedef enum { 6466 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 6467 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 6468 WMI_HOST_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 6469 } WMI_HOST_TPC_CONFIG_EVENT_FLAG; 6470 6471 /** 6472 * Medium Utilization evaluation algorithms 6473 * These algorithms can be complementary rather than exclusive. 6474 */ 6475 typedef enum { 6476 WMI_HOST_MU_BASIC_ALGO = 0x1, 6477 WMI_HOST_MU_PER_BSSID_ALGO = 0x2, 6478 WMI_HOST_MU_HIDDEN_NODE_ALGO = 0x4, 6479 } WMI_HOST_MU_ALGO_TYPE; 6480 /* max MU alg combinations supported by target */ 6481 #define WMI_HOST_MU_MAX_ALGO_TYPE 3 6482 6483 /** 6484 * struct wmi_host_mu_db_entry 6485 * @event_type: 0=AP, 1=STA, 2=Small Cell(SC) 6486 * @bssid_mac_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC 6487 * @tx_addr: Transmitter MAC if entry is WiFi node. PLMNID if SC 6488 * @avg_duration_us: Avg. duration for which node was transmitting 6489 * @avg_rssi: Avg. RSSI of all TX packets by node. Unit dBm 6490 * @mu_percent: % medium utilization by node 6491 */ 6492 typedef struct { 6493 uint32_t entry_type; 6494 wmi_host_mac_addr bssid_mac_addr; 6495 wmi_host_mac_addr tx_addr; 6496 uint32_t avg_duration_us; 6497 uint32_t avg_rssi; 6498 uint32_t mu_percent; 6499 } wmi_host_mu_db_entry; 6500 6501 /** 6502 * struct wmi_host_mu_report_event - WMI_MU_REPORT_EVENTID 6503 * @mu_request_id: request id 6504 * @status_reason: MU_STATUS_REASON 6505 * @total_mu: MU_ALG_TYPE combinations 6506 * @num_active_bssid: number of active bssid 6507 * @hidden_node_mu : hidden node algo MU per bin 6508 * @num_TA_entries : No. of entries found in MU db report 6509 */ 6510 typedef struct { 6511 uint32_t mu_request_id; 6512 uint32_t status_reason; 6513 uint32_t total_mu[WMI_HOST_MU_MAX_ALGO_TYPE]; 6514 uint32_t num_active_bssid; 6515 uint32_t hidden_node_mu[LTEU_MAX_BINS]; 6516 uint32_t num_TA_entries; 6517 } wmi_host_mu_report_event; 6518 6519 /** 6520 * struct wmi_host_mgmt_tx_compl_event - TX completion event 6521 * @desc_id: from tx_send_cmd 6522 * @status: WMI_MGMT_TX_COMP_STATUS_TYPE 6523 * @pdev_id: pdev_id 6524 * @ppdu_id: ppdu_id 6525 */ 6526 typedef struct { 6527 uint32_t desc_id; 6528 uint32_t status; 6529 uint32_t pdev_id; 6530 uint32_t ppdu_id; 6531 } wmi_host_mgmt_tx_compl_event; 6532 6533 /** 6534 * struct wmi_host_offchan_data_tx_compl_event - TX completion event 6535 * @desc_id: from tx_send_cmd 6536 * @status: VWMI_MGMT_TX_COMP_STATUS_TYPE 6537 * @pdev_id: pdev_id 6538 */ 6539 struct wmi_host_offchan_data_tx_compl_event { 6540 uint32_t desc_id; 6541 uint32_t status; 6542 uint32_t pdev_id; 6543 }; 6544 6545 #define WMI_HOST_TIM_BITMAP_ARRAY_SIZE 17 6546 6547 /** 6548 * struct wmi_host_tim_info - TIM info in SWBA event 6549 * @tim_len: TIM length 6550 * @tim_mcast: 6551 * @tim_bitmap: TIM bitmap 6552 * @tim_changed: TIM changed 6553 * @tim_num_ps_pending: TIM num PS sta pending 6554 * @vdev_id: Vdev id 6555 */ 6556 typedef struct { 6557 uint32_t tim_len; 6558 uint32_t tim_mcast; 6559 uint32_t tim_bitmap[WMI_HOST_TIM_BITMAP_ARRAY_SIZE]; 6560 uint32_t tim_changed; 6561 uint32_t tim_num_ps_pending; 6562 uint32_t vdev_id; 6563 } wmi_host_tim_info; 6564 6565 /** 6566 * struct wmi_host_p2p_noa_descriptor - NoA desc in SWBA event 6567 * @type_count: Absence count 6568 * @duration: NoA duration 6569 * @interval: NoA interval 6570 * @start_time: start time 6571 */ 6572 typedef struct { 6573 uint32_t type_count; 6574 uint32_t duration; 6575 uint32_t interval; 6576 uint32_t start_time; 6577 } wmi_host_p2p_noa_descriptor; 6578 /* Maximum number of NOA Descriptors supported */ 6579 #define WMI_HOST_P2P_MAX_NOA_DESCRIPTORS 4 6580 /** 6581 * struct wmi_host_p2p_noa_info - p2p noa information 6582 * @modified: NoA modified 6583 * @index: Index 6584 * @oppPS: Oppurtunstic ps 6585 * @ctwindow: CT window 6586 * @num_descriptors: number of descriptors 6587 * @noa_descriptors: noa descriptors 6588 * @vdev_id: Vdev id 6589 */ 6590 typedef struct { 6591 uint8_t modified; 6592 uint8_t index; 6593 uint8_t oppPS; 6594 uint8_t ctwindow; 6595 uint8_t num_descriptors; 6596 wmi_host_p2p_noa_descriptor 6597 noa_descriptors[WMI_HOST_P2P_MAX_NOA_DESCRIPTORS]; 6598 uint32_t vdev_id; 6599 } wmi_host_p2p_noa_info; 6600 6601 /** 6602 * struct wmi_host_peer_sta_kickout_event 6603 * @peer_macaddr: peer mac address 6604 * @reason: kickout reason 6605 * @rssi: rssi 6606 * @pdev_id: pdev_id 6607 */ 6608 typedef struct { 6609 uint8_t peer_macaddr[IEEE80211_ADDR_LEN]; 6610 uint32_t reason; 6611 uint32_t rssi; 6612 } wmi_host_peer_sta_kickout_event; 6613 6614 /** 6615 * struct wmi_host_peer_sta_ps_statechange_event - ST ps state change event 6616 * @peer_macaddr: peer mac address 6617 * @peer_ps_stats: peer PS state 6618 * @pdev_id: pdev_id 6619 */ 6620 typedef struct { 6621 uint8_t peer_macaddr[IEEE80211_ADDR_LEN]; 6622 uint32_t peer_ps_state; 6623 } wmi_host_peer_sta_ps_statechange_event; 6624 6625 /* Maximum CCK, OFDM rates supported */ 6626 #define WMI_SA_MAX_CCK_OFDM_RATES 12 6627 /* Maximum MCS rates supported; 4 rates in each dword */ 6628 #define WMI_SA_MAX_MCS_RATES 40 6629 #define WMI_SA_MAX_RATE_COUNTERS 4 6630 /* Maximum rate series used for transmission */ 6631 #define SA_MAX_RATE_SERIES 2 6632 6633 #define SA_MAX_LEGACY_RATE_DWORDS 3 6634 #define SA_MAX_HT_RATE_DWORDS 10 6635 #define SA_BYTES_IN_DWORD 4 6636 #define SA_MASK_BYTE 0xff 6637 /* TODO: ratecode_160 needs to add for future chips */ 6638 /** 6639 * struct wmi_sa_rate_cap - smart antenna rat capabilities 6640 * @pdev_id: pdev_id 6641 * @ratecode_legacy: Rate code array for CCK OFDM 6642 * @ratecode_20: Rate code array for 20MHz BW 6643 * @ratecode_40: Rate code array for 40MHz BW 6644 * @ratecode_80: Rate code array for 80MHz BW 6645 * @ratecount: Max Rate count for each mode 6646 */ 6647 typedef struct { 6648 uint8_t ratecode_legacy[WMI_SA_MAX_CCK_OFDM_RATES]; 6649 uint8_t ratecode_20[WMI_SA_MAX_MCS_RATES]; 6650 uint8_t ratecode_40[WMI_SA_MAX_MCS_RATES]; 6651 uint8_t ratecode_80[WMI_SA_MAX_MCS_RATES]; 6652 uint8_t ratecount[WMI_SA_MAX_RATE_COUNTERS]; 6653 } wmi_sa_rate_cap; 6654 6655 /** Preamble types to be used with VDEV fixed rate configuration */ 6656 typedef enum { 6657 WMI_HOST_RATE_PREAMBLE_OFDM, 6658 WMI_HOST_RATE_PREAMBLE_CCK, 6659 WMI_HOST_RATE_PREAMBLE_HT, 6660 WMI_HOST_RATE_PREAMBLE_VHT, 6661 WMI_HOST_RATE_PREAMBLE_HE, 6662 } WMI_HOST_RATE_PREAMBLE; 6663 6664 #define WMI_HOST_FIXED_RATE_NONE (0xff) 6665 6666 /** slot time long */ 6667 #define WMI_HOST_VDEV_SLOT_TIME_LONG 0x1 6668 /** slot time short */ 6669 #define WMI_HOST_VDEV_SLOT_TIME_SHORT 0x2 6670 /** preablbe long */ 6671 #define WMI_HOST_VDEV_PREAMBLE_LONG 0x1 6672 /** preablbe short */ 6673 #define WMI_HOST_VDEV_PREAMBLE_SHORT 0x2 6674 /** found a better AP */ 6675 #define WMI_HOST_ROAM_REASON_BETTER_AP 0x1 6676 /** beacon miss detected */ 6677 #define WMI_HOST_ROAM_REASON_BMISS 0x2 6678 /** deauth/disassoc received */ 6679 #define WMI_HOST_ROAM_REASON_DEAUTH 0x2 6680 /** connected AP's low rssi condition detected */ 6681 #define WMI_HOST_ROAM_REASON_LOW_RSSI 0x3 6682 /** found another AP that matches SSID and Security profile in 6683 * WMI_ROAM_AP_PROFILE, found during scan triggered upon FINAL_BMISS 6684 */ 6685 #define WMI_HOST_ROAM_REASON_SUITABLE_AP 0x4 6686 /** LFR3.0 roaming failed, indicate the disconnection to host */ 6687 #define WMI_HOST_ROAM_REASON_HO_FAILED 0x5 6688 6689 /** values for vdev_type */ 6690 #define WMI_HOST_VDEV_TYPE_AP 0x1 6691 #define WMI_HOST_VDEV_TYPE_STA 0x2 6692 #define WMI_HOST_VDEV_TYPE_IBSS 0x3 6693 #define WMI_HOST_VDEV_TYPE_MONITOR 0x4 6694 6695 /** values for vdev_subtype */ 6696 #define WMI_HOST_VDEV_SUBTYPE_P2P_DEVICE 0x1 6697 #define WMI_HOST_VDEV_SUBTYPE_P2P_CLIENT 0x2 6698 #define WMI_HOST_VDEV_SUBTYPE_P2P_GO 0x3 6699 #define WMI_HOST_VDEV_SUBTYPE_PROXY_STA 0x4 6700 #define WMI_HOST_VDEV_SUBTYPE_MESH 0x5 6701 6702 #define WMI_HOST_MGMT_TID 17 6703 /* Disable aging & learning */ 6704 #define WMI_HOST_WDS_FLAG_STATIC 0x1 6705 6706 /** 6707 * Peer param enum abstracted from target 6708 */ 6709 typedef enum { 6710 /** mimo powersave state */ 6711 WMI_HOST_PEER_MIMO_PS_STATE = 0x1, 6712 /** enable/disable AMPDU . initial value (enabled) */ 6713 WMI_HOST_PEER_AMPDU = 0x2, 6714 /** authorize/unauthorize peer. initial value is unauthorized (0) */ 6715 WMI_HOST_PEER_AUTHORIZE = 0x3, 6716 /** peer channel bandwidth */ 6717 WMI_HOST_PEER_CHWIDTH = 0x4, 6718 /** peer NSS */ 6719 WMI_HOST_PEER_NSS = 0x5, 6720 /** USE 4 ADDR */ 6721 WMI_HOST_PEER_USE_4ADDR = 0x6, 6722 /** Enable extended peer stats */ 6723 WMI_HOST_PEER_EXT_STATS_ENABLE = 0x7, 6724 /*Use FIXED Pwr */ 6725 WMI_HOST_PEER_USE_FIXED_PWR = 0x8, 6726 /* Set peer fixed rate */ 6727 WMI_HOST_PEER_PARAM_FIXED_RATE = 0x9, 6728 /* Whitelist peer TIDs */ 6729 WMI_HOST_PEER_SET_MU_WHITELIST = 0xa, 6730 /* set group membership status */ 6731 WMI_HOST_PEER_MEMBERSHIP = 0xb, 6732 WMI_HOST_PEER_USERPOS = 0xc, 6733 WMI_HOST_PEER_CRIT_PROTO_HINT_ENABLED = 0xd, 6734 WMI_HOST_PEER_TX_FAIL_CNT_THR = 0xe, 6735 WMI_HOST_PEER_SET_HW_RETRY_CTS2S = 0xf, 6736 WMI_HOST_PEER_IBSS_ATIM_WINDOW_LENGTH = 0x10, 6737 WMI_HOST_PEER_PHYMODE = 0x11, 6738 WMI_HOST_PEER_SET_MAC_TX_RATE = 0x12, 6739 /* Set default Rx routing */ 6740 WMI_HOST_PEER_SET_DEFAULT_ROUTING = 0x13, 6741 WMI_HOST_PEER_SET_MIN_TX_RATE = 0x14, 6742 /* peer NSS for 160Mhx */ 6743 WMI_HOST_PEER_NSS_VHT160 = 0x15, 6744 /* peer NSS for 160Mhx */ 6745 WMI_HOST_PEER_NSS_VHT80_80 = 0x16, 6746 /* Set SU sounding interval */ 6747 WMI_HOST_PEER_PARAM_SU_TXBF_SOUNDING_INTERVAL = 0x17, 6748 /* Set MU sounding interval */ 6749 WMI_HOST_PEER_PARAM_MU_TXBF_SOUNDING_INTERVAL = 0x18, 6750 /* Enable sounding interval set */ 6751 WMI_HOST_PEER_PARAM_TXBF_SOUNDING_ENABLE = 0x19, 6752 /* Enable MU support */ 6753 WMI_HOST_PEER_PARAM_MU_ENABLE = 0x1a, 6754 /* Enable OFDMA support */ 6755 WMI_HOST_PEER_PARAM_OFDMA_ENABLE = 0x1b, 6756 } PEER_PARAM_ENUM; 6757 #define WMI_HOST_PEER_MIMO_PS_NONE 0x0 6758 #define WMI_HOST_PEER_MIMO_PS_STATIC 0x1 6759 #define WMI_HOST_PEER_MIMO_PS_DYNAMIC 0x2 6760 typedef enum { 6761 HOST_PLATFORM_HIGH_PERF, 6762 HOST_PLATFORM_LOW_PERF, 6763 HOST_PLATFORM_LOW_PERF_NO_FETCH, 6764 } HOST_PLATFORM_TYPE; 6765 6766 enum wmi_host_sta_ps_mode { 6767 /** enable power save for the given STA VDEV */ 6768 WMI_HOST_STA_PS_MODE_DISABLED = 0, 6769 /** disable power save for a given STA VDEV */ 6770 WMI_HOST_STA_PS_MODE_ENABLED = 1, 6771 }; 6772 enum wmi_host_sta_powersave_param { 6773 /** 6774 * Controls how frames are retrievd from AP while STA is sleeping 6775 * 6776 * (see enum wmi_sta_ps_param_rx_wake_policy) 6777 */ 6778 WMI_HOST_STA_PS_PARAM_RX_WAKE_POLICY = 0, 6779 6780 /** 6781 * The STA will go active after this many TX 6782 * 6783 * (see enum wmi_sta_ps_param_tx_wake_threshold) 6784 */ 6785 WMI_HOST_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 6786 6787 /** 6788 * Number of PS-Poll to send before STA wakes up 6789 * 6790 * (see enum wmi_sta_ps_param_pspoll_count) 6791 * 6792 */ 6793 WMI_HOST_STA_PS_PARAM_PSPOLL_COUNT = 2, 6794 6795 /** 6796 * TX/RX inactivity time in msec before going to sleep. 6797 * 6798 * The power save SM will monitor tx/rx activity on the VDEV, if no 6799 * activity for the specified msec of the parameter 6800 * the Power save SM will go to sleep. 6801 */ 6802 WMI_HOST_STA_PS_PARAM_INACTIVITY_TIME = 3, 6803 6804 /** 6805 * Set uapsd configuration. 6806 * 6807 * (see enum wmi_sta_ps_param_uapsd) 6808 */ 6809 WMI_HOST_STA_PS_PARAM_UAPSD = 4, 6810 }; 6811 /* prefix used by scan requestor ids on the host 6812 * replicated here form wmi_unified.h*/ 6813 #define WMI_HOST_P_SCAN_REQUESTOR_ID_PREFIX 0xA000 6814 /* prefix used by scan request ids generated on the host */ 6815 /* host cycles through the lower 12 bits to generate ids */ 6816 #define WMI_HOST_P_SCAN_REQ_ID_PREFIX 0xA000 6817 6818 #define WMI_HOST_RC_DS_FLAG 0x01 /* Dual stream flag */ 6819 #define WMI_HOST_RC_CW40_FLAG 0x02 /* CW 40 */ 6820 #define WMI_HOST_RC_SGI_FLAG 0x04 /* Short Guard Interval */ 6821 #define WMI_HOST_RC_HT_FLAG 0x08 /* HT */ 6822 #define WMI_HOST_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ 6823 #define WMI_HOST_RC_TX_STBC_FLAG 0x20 /* TX STBC */ 6824 #define WMI_HOST_RC_RX_STBC_FLAG 0xC0 /* RX STBC ,2 bits */ 6825 #define WMI_HOST_RC_RX_STBC_FLAG_S 6 /* RX STBC ,2 bits */ 6826 #define WMI_HOST_RC_WEP_TKIP_FLAG 0x100 /* WEP/TKIP encryption */ 6827 #define WMI_HOST_RC_TS_FLAG 0x200 /* Three stream flag */ 6828 #define WMI_HOST_RC_UAPSD_FLAG 0x400 /* UAPSD Rate Control */ 6829 6830 /** HT Capabilities*/ 6831 #define WMI_HOST_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 6832 /* Short Guard Interval with HT20 */ 6833 #define WMI_HOST_HT_CAP_HT20_SGI 0x0002 6834 #define WMI_HOST_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 6835 #define WMI_HOST_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 6836 #define WMI_HOST_HT_CAP_TX_STBC_MASK_SHIFT 3 6837 #define WMI_HOST_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 6838 #define WMI_HOST_HT_CAP_RX_STBC_MASK_SHIFT 4 6839 #define WMI_HOST_HT_CAP_LDPC 0x0040 /* LDPC supported */ 6840 #define WMI_HOST_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 6841 #define WMI_HOST_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 6842 #define WMI_HOST_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 6843 #define WMI_HOST_HT_CAP_HT40_SGI 0x0800 6844 #define WMI_HOST_HT_CAP_RX_LDPC 0x1000 6845 #define WMI_HOST_HT_CAP_TX_LDPC 0x2000 6846 #define WMI_HOST_HT_CAP_IBF_BFER 0x4000 6847 6848 /* These macros should be used when we wish to advertise STBC support for 6849 * only 1SS or 2SS or 3SS. */ 6850 #define WMI_HOST_HT_CAP_RX_STBC_1SS 0x0010 /* B4-B5 RX STBC */ 6851 #define WMI_HOST_HT_CAP_RX_STBC_2SS 0x0020 /* B4-B5 RX STBC */ 6852 #define WMI_HOST_HT_CAP_RX_STBC_3SS 0x0030 /* B4-B5 RX STBC */ 6853 6854 6855 #define WMI_HOST_HT_CAP_DEFAULT_ALL (WMI_HOST_HT_CAP_ENABLED | \ 6856 WMI_HOST_HT_CAP_HT20_SGI | \ 6857 WMI_HOST_HT_CAP_HT40_SGI | \ 6858 WMI_HOST_HT_CAP_TX_STBC | \ 6859 WMI_HOST_HT_CAP_RX_STBC | \ 6860 WMI_HOST_HT_CAP_LDPC) 6861 6862 /* WMI_HOST_VHT_CAP_* these maps to ieee 802.11ac vht capability information 6863 field. The fields not defined here are not supported, or reserved. 6864 Do not change these masks and if you have to add new one follow the 6865 bitmask as specified by 802.11ac draft. 6866 */ 6867 6868 #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 6869 #define WMI_HOST_VHT_CAP_RX_LDPC 0x00000010 6870 #define WMI_HOST_VHT_CAP_SGI_80MHZ 0x00000020 6871 #define WMI_HOST_VHT_CAP_SGI_160MHZ 0x00000040 6872 #define WMI_HOST_VHT_CAP_TX_STBC 0x00000080 6873 #define WMI_HOST_VHT_CAP_RX_STBC_MASK 0x00000300 6874 #define WMI_HOST_VHT_CAP_RX_STBC_MASK_SHIFT 8 6875 #define WMI_HOST_VHT_CAP_SU_BFER 0x00000800 6876 #define WMI_HOST_VHT_CAP_SU_BFEE 0x00001000 6877 #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 6878 #define WMI_HOST_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 6879 #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 6880 #define WMI_HOST_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 6881 #define WMI_HOST_VHT_CAP_MU_BFER 0x00080000 6882 #define WMI_HOST_VHT_CAP_MU_BFEE 0x00100000 6883 #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 6884 #define WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT 23 6885 #define WMI_HOST_VHT_CAP_RX_FIXED_ANT 0x10000000 6886 #define WMI_HOST_VHT_CAP_TX_FIXED_ANT 0x20000000 6887 6888 #define WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 6889 6890 /* These macros should be used when we wish to advertise STBC support for 6891 * only 1SS or 2SS or 3SS. */ 6892 #define WMI_HOST_VHT_CAP_RX_STBC_1SS 0x00000100 6893 #define WMI_HOST_VHT_CAP_RX_STBC_2SS 0x00000200 6894 #define WMI_HOST_VHT_CAP_RX_STBC_3SS 0x00000300 6895 6896 #define WMI_HOST_VHT_CAP_DEFAULT_ALL (WMI_HOST_VHT_CAP_MAX_MPDU_LEN_11454 | \ 6897 WMI_HOST_VHT_CAP_SGI_80MHZ | \ 6898 WMI_HOST_VHT_CAP_TX_STBC | \ 6899 WMI_HOST_VHT_CAP_RX_STBC_MASK | \ 6900 WMI_HOST_VHT_CAP_RX_LDPC | \ 6901 WMI_HOST_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 6902 WMI_HOST_VHT_CAP_RX_FIXED_ANT | \ 6903 WMI_HOST_VHT_CAP_TX_FIXED_ANT) 6904 6905 /* Interested readers refer to Rx/Tx MCS Map definition as defined in 6906 802.11ac 6907 */ 6908 #define WMI_HOST_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 6909 #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 6910 #define WMI_HOST_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 6911 6912 /** U-APSD configuration of peer station from (re)assoc request and TSPECs */ 6913 enum wmi_host_ap_ps_param_uapsd { 6914 WMI_HOST_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 6915 WMI_HOST_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 6916 WMI_HOST_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 6917 WMI_HOST_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 6918 WMI_HOST_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 6919 WMI_HOST_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 6920 WMI_HOST_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6921 WMI_HOST_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6922 }; 6923 /** U-APSD maximum service period of peer station */ 6924 enum wmi_host_ap_ps_peer_param_max_sp { 6925 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 6926 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 6927 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 6928 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 6929 6930 /* keep last! */ 6931 MAX_HOST_WMI_AP_PS_PEER_PARAM_MAX_SP, 6932 }; 6933 6934 #define WMI_HOST_UAPSD_AC_TYPE_DELI 0 6935 #define WMI_HOST_UAPSD_AC_TYPE_TRIG 1 6936 6937 #define WMI_HOST_UAPSD_AC_BIT_MASK(ac, type) \ 6938 ((type == WMI_HOST_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) :\ 6939 (1<<((ac<<1)+1))) 6940 6941 enum wmi_host_ap_ps_peer_param_wnm_sleep { 6942 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_ENABLE, 6943 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP_DISABLE, 6944 }; 6945 6946 enum wmi_host_ap_ps_peer_param { 6947 /** Set uapsd configuration for a given peer. 6948 * 6949 * This will include the delivery and trigger enabled state for every AC. 6950 * The host MLME needs to set this based on AP capability and stations 6951 * request Set in the association request received from the station. 6952 * 6953 * Lower 8 bits of the value specify the UAPSD configuration. 6954 * 6955 * (see enum wmi_ap_ps_param_uapsd) 6956 * The default value is 0. 6957 */ 6958 WMI_HOST_AP_PS_PEER_PARAM_UAPSD = 0, 6959 6960 /** 6961 * Set the service period for a UAPSD capable station 6962 * 6963 * The service period from wme ie in the (re)assoc request frame. 6964 * 6965 * (see enum wmi_ap_ps_peer_param_max_sp) 6966 */ 6967 WMI_HOST_AP_PS_PEER_PARAM_MAX_SP = 1, 6968 6969 /** Time in seconds for aging out buffered frames 6970 * for STA in power save */ 6971 WMI_HOST_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6972 6973 /** Specify frame types that are considered SIFS 6974 * RESP trigger frame */ 6975 WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3, 6976 6977 /** Specifies the trigger state of TID. 6978 * Valid only for UAPSD frame type */ 6979 WMI_HOST_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4, 6980 6981 /** Specifies the WNM sleep state of a STA */ 6982 WMI_HOST_AP_PS_PEER_PARAM_WNM_SLEEP = 5, 6983 }; 6984 #define WMI_HOST_RXERR_CRC 0x01 /* CRC error on frame */ 6985 #define WMI_HOST_RXERR_DECRYPT 0x08 /* non-Michael decrypt error */ 6986 #define WMI_HOST_RXERR_MIC 0x10 /* Michael MIC decrypt error */ 6987 #define WMI_HOST_RXERR_KEY_CACHE_MISS 0x20 /* No/incorrect key matter in h/w */ 6988 6989 enum wmi_host_sta_ps_param_uapsd { 6990 WMI_HOST_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 6991 WMI_HOST_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 6992 WMI_HOST_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 6993 WMI_HOST_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 6994 WMI_HOST_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 6995 WMI_HOST_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 6996 WMI_HOST_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6997 WMI_HOST_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6998 }; 6999 7000 enum wmi_host_sta_ps_param_rx_wake_policy { 7001 /* Wake up when ever there is an RX activity on the VDEV. In this mode 7002 * the Power save SM(state machine) will come out of sleep by either 7003 * sending null frame (or) a data frame (with PS==0) in response to TIM 7004 * bit set in the received beacon frame from AP. 7005 */ 7006 WMI_HOST_STA_PS_RX_WAKE_POLICY_WAKE = 0, 7007 7008 /* Here the power save state machine will not wakeup in response to TIM 7009 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 7010 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 7011 * access categories are delivery-enabled, the station will send a UAPSD 7012 * trigger frame, otherwise it will send a PS-Poll. 7013 */ 7014 WMI_HOST_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 7015 }; 7016 enum wmi_host_sta_ps_param_pspoll_count { 7017 WMI_HOST_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 7018 /* Values greater than 0 indicate the maximum numer of PS-Poll frames FW 7019 * will send before waking up. 7020 */ 7021 }; 7022 /** Number of tx frames/beacon that cause the power save SM to wake up. 7023 * 7024 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 7025 * meaning, It will cause the SM to never wake up. This is useful if you want 7026 * to keep the system to sleep all the time for some kind of test mode . host 7027 * can change this parameter any time. It will affect at the next tx frame. 7028 */ 7029 enum wmi_host_sta_ps_param_tx_wake_threshold { 7030 WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 7031 WMI_HOST_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 7032 7033 /* Values greater than one indicate that many TX attempts per beacon 7034 * interval before the STA will wake up 7035 */ 7036 }; 7037 /* 7038 * Transmit power scale factor. 7039 * 7040 */ 7041 typedef enum { 7042 WMI_HOST_TP_SCALE_MAX = 0, /* no scaling (default) */ 7043 WMI_HOST_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 7044 WMI_HOST_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 7045 WMI_HOST_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 7046 WMI_HOST_TP_SCALE_MIN = 4, /* min, but still on */ 7047 WMI_HOST_TP_SCALE_SIZE = 5, /* max num of enum */ 7048 } WMI_HOST_TP_SCALE; 7049 enum { 7050 WMI_HOST_RATEPWR_TABLE_OPS_SET, 7051 WMI_HOST_RATEPWR_TABLE_OPS_GET, 7052 }; 7053 /* reserved up through 0xF */ 7054 /** 7055 * struct wmi_host_dcs_mib_stats - WLAN IM stats from target to host 7056 * Below statistics are sent from target to host periodically. 7057 * These are collected at target as long as target is running 7058 * and target chip is not in sleep. 7059 * @listen_time: 7060 * @reg_tx_frame_cnt: 7061 * @reg_rx_frame_cnt: 7062 * @reg_rxclr_cnt: 7063 * @reg_cycle_cnt: delta cycle count 7064 * @reg_rxclr_ext_cnt: 7065 * @reg_ofdm_phyerr_cnt: 7066 * @reg_cck_phyerr_cnt: CCK err count since last reset, read from register 7067 */ 7068 typedef struct _hp_dcs_mib_stats { 7069 int32_t listen_time; 7070 uint32_t reg_tx_frame_cnt; 7071 uint32_t reg_rx_frame_cnt; 7072 uint32_t reg_rxclr_cnt; 7073 uint32_t reg_cycle_cnt; 7074 uint32_t reg_rxclr_ext_cnt; 7075 uint32_t reg_ofdm_phyerr_cnt; 7076 uint32_t reg_cck_phyerr_cnt; 7077 } wmi_host_dcs_mib_stats_t; 7078 7079 /** 7080 * struct wmi_host_dcs_im_tgt_stats - DCS IM target stats 7081 * @reg_tsf32: current running TSF from the TSF-1 7082 * @last_ack_rssi: Known last frame rssi, in case of multiple stations, if 7083 * and at different ranges, this would not gaurantee that 7084 * this is the least rssi. 7085 * @tx_waste_time: Sum of all the failed durations in the last 7086 * one second interval. 7087 * @rx_time: count how many times the hal_rxerr_phy is marked, in this 7088 * time period 7089 * @phyerr_cnt: 7090 * @mib_stats: wmi_host_dcs_mib_stats_t - collected mib stats as explained 7091 * in mib structure 7092 * @chan_nf: Channel noise floor (Units are in dBm) 7093 * @my_bss_rx_cycle_count: BSS rx cycle count 7094 */ 7095 typedef struct _wmi_host_dcs_im_tgt_stats { 7096 uint32_t reg_tsf32; 7097 uint32_t last_ack_rssi; 7098 uint32_t tx_waste_time; 7099 uint32_t rx_time; 7100 uint32_t phyerr_cnt; 7101 wmi_host_dcs_mib_stats_t mib_stats; 7102 uint32_t chan_nf; 7103 uint32_t my_bss_rx_cycle_count; 7104 } wmi_host_dcs_im_tgt_stats_t; 7105 7106 /** 7107 * Enum for pktlog req 7108 */ 7109 typedef enum { 7110 WMI_HOST_PKTLOG_EVENT_RX = 0x1, 7111 WMI_HOST_PKTLOG_EVENT_TX = 0x2, 7112 WMI_HOST_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */ 7113 WMI_HOST_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */ 7114 WMI_HOST_PKTLOG_EVENT_DBG_PRINT = 0x10, /* DEBUG prints */ 7115 /* To support Smart Antenna */ 7116 WMI_HOST_PKTLOG_EVENT_SMART_ANTENNA = 0x20, 7117 WMI_HOST_PKTLOG_EVENT_H_INFO = 0x40, 7118 WMI_HOST_PKTLOG_EVENT_STEERING = 0x80, 7119 /* To support Tx data Capture */ 7120 WMI_HOST_PKTLOG_EVENT_TX_DATA_CAPTURE = 0x100, 7121 } WMI_HOST_PKTLOG_EVENT; 7122 7123 /** 7124 * wmi_host_phyerr 7125 * 7126 */ 7127 #define WMI_HOST_PHY_ERROR_SPECTRAL_SCAN 0x26 7128 #define WMI_HOST_PHY_ERROR_FALSE_RADAR_EXT 0x24 7129 7130 #define WMI_HOST_AR900B_DFS_PHYERR_MASK 0x4 7131 #define WMI_HOST_AR900B_SPECTRAL_PHYERR_MASK 0x4000000 7132 7133 /** 7134 * struct wmi_host_perchain_rssi_info - per chain RSSI info 7135 * @rssi_pri20: RSSI on primary 20 7136 * @rssi_sec20: RSSI on secomdary 20 7137 * @rssi_sec40: RSSI secondary 40 7138 * @rssi_sec80: RSSI secondary 80 7139 */ 7140 typedef struct wmi_host_perchain_rssi_info { 7141 int8_t rssi_pri20; 7142 int8_t rssi_sec20; 7143 int8_t rssi_sec40; 7144 int8_t rssi_sec80; 7145 } wmi_host_perchain_rssi_info_t; 7146 7147 /** 7148 * struct _wmi_host_rf_info - RF measurement information 7149 * @rssi_comb: RSSI Information 7150 * @pc_rssi_info[4]: For now, we know we are getting information 7151 * for only 4 chains at max. For future extensions 7152 * use a define 7153 * @noise_floor: Noise floor information 7154 */ 7155 typedef struct _wmi_host_rf_info { 7156 int8_t rssi_comb; 7157 wmi_host_perchain_rssi_info_t pc_rssi_info[4]; 7158 int16_t noise_floor[4]; 7159 } wmi_host_rf_info_t; 7160 7161 /** 7162 * struct _wmi_host_chan_info 7163 * @center_freq1: center frequency 1 in MHz 7164 * @center_freq2: center frequency 2 in MHz -valid only for 7165 * 11ACVHT 80PLUS80 mode 7166 * @chan_width: channel width in MHz 7167 */ 7168 typedef struct _wmi_host_chan_info { 7169 u_int16_t center_freq1; 7170 u_int16_t center_freq2; 7171 u_int8_t chan_width; 7172 } wmi_host_chan_info_t; 7173 7174 /** 7175 * struct wmi_host_phyerr 7176 * @rf_info: 7177 * @chan_info: 7178 * @tsf64: 7179 * @phy_err_code: 7180 * @tsf_timestamp: 7181 * @bufp: 7182 * @buf_len: 7183 * @phy_err_mask0: 7184 * @phy_err_mask1: 7185 * @pdev_id: pdev_id 7186 */ 7187 typedef struct _wmi_host_phyerr { 7188 wmi_host_rf_info_t rf_info; 7189 wmi_host_chan_info_t chan_info; 7190 uint64_t tsf64; 7191 int32_t phy_err_code; 7192 uint32_t tsf_timestamp; 7193 uint8_t *bufp; 7194 uint32_t buf_len; 7195 uint32_t phy_err_mask0; 7196 uint32_t phy_err_mask1; 7197 uint32_t pdev_id; 7198 } wmi_host_phyerr_t; 7199 7200 /** 7201 * struct wmi_host_rtt_event_hdr 7202 * @req_id: request id 7203 * @status: status 7204 * @meas_done: measurement done flag 7205 * @meas_type: measurement type 7206 * @report_type: report type 7207 * @v3_status: v2 status 7208 * @v3_finish: 7209 * @v3_tm_start: 7210 * @num_ap: number of AP 7211 * @result: resuult 7212 * @dest_mac: destination mac 7213 */ 7214 typedef struct { 7215 uint16_t req_id; 7216 uint16_t status:1, 7217 meas_done:1, 7218 meas_type:3, 7219 report_type:3, 7220 v3_status:2, 7221 v3_finish:1, 7222 v3_tm_start:1, 7223 num_ap:4; 7224 uint16_t result; 7225 uint8_t dest_mac[IEEE80211_ADDR_LEN]; 7226 } wmi_host_rtt_event_hdr; 7227 7228 /** 7229 * struct wmi_host_rtt_meas_event - RTT measurement event 7230 * @chain_mask: 7231 * @bw: 7232 * @rsvd: 7233 * @txrxchain_mask: Bit:0-3:chain mask 7234 * Bit 4-5: band width info 7235 * 00 --Legacy 20, 01 --HT/VHT20 7236 * 10 --HT/VHT40, 11 -- VHT80 7237 * @tod: resolution of 0.1ns 7238 * @toa: resolution of 0.1ns 7239 * @t3: 7240 * @t4: 7241 * @rssi0: 7242 * @rssi1: 7243 * @rssi2: 7244 * @rssi3: 7245 */ 7246 typedef struct { 7247 uint32_t chain_mask:3, 7248 bw:2, 7249 rsvd:27; 7250 uint32_t txrxchain_mask; 7251 uint64_t tod; 7252 uint64_t toa; 7253 uint64_t t3; 7254 uint64_t t4; 7255 uint32_t rssi0; 7256 uint32_t rssi1; 7257 uint32_t rssi2; 7258 uint32_t rssi3; 7259 } wmi_host_rtt_meas_event; 7260 7261 /*----RTT Report event definition ----*/ 7262 typedef enum { 7263 /* rtt cmd header parsing error --terminate */ 7264 WMI_HOST_RTT_COMMAND_HEADER_ERROR = 0, 7265 /* rtt body parsing error -- skip current STA REQ */ 7266 WMI_HOST_RTT_COMMAND_ERROR, 7267 /* rtt no resource -- terminate */ 7268 WMI_HOST_RTT_MODULE_BUSY, 7269 /* STA exceed the support limit -- only server the first n STA */ 7270 WMI_HOST_RTT_TOO_MANY_STA, 7271 /* any allocate failure */ 7272 WMI_HOST_RTT_NO_RESOURCE, 7273 /* can not find vdev with vdev ID - skip current STA REQ */ 7274 WMI_HOST_RTT_VDEV_ERROR, 7275 /* Tx failure -- continiue and measure number */ 7276 WMI_HOST_RTT_TRANSIMISSION_ERROR, 7277 /* wait for first TM timer expire-terminate current STA measurement */ 7278 WMI_HOST_RTT_TM_TIMER_EXPIRE, 7279 /* we do not support RTT measurement with this type of frame */ 7280 WMI_HOST_RTT_FRAME_TYPE_NOSUPPORT, 7281 /* whole RTT measurement timer expire-terminate 7282 ** current STA measurement */ 7283 WMI_HOST_RTT_TIMER_EXPIRE, 7284 /* channel swicth failed */ 7285 WMI_HOST_RTT_CHAN_SWITCH_ERROR, 7286 /* TMR trans error, this dest peer will be skipped */ 7287 WMI_HOST_RTT_TMR_TRANS_ERROR, 7288 /* V3 only. If both CFR and Token mismatch, do not report */ 7289 WMI_HOST_RTT_NO_REPORT_BAD_CFR_TOKEN, 7290 /* For First TM, if CFR is bad, then do not report */ 7291 WMI_HOST_RTT_NO_REPORT_FIRST_TM_BAD_CFR, 7292 /* do not allow report type2 mix with type 0, 1 */ 7293 WMI_HOST_RTT_REPORT_TYPE2_MIX, 7294 /* LCI Configuration OK. - Responder only */ 7295 WMI_HOST_RTT_LCI_CFG_OK, 7296 /* LCR configuration OK. - Responder only */ 7297 WMI_HOST_RTT_LCR_CFG_OK, 7298 /* Bad configuration LCI (or) LCR request - Responder only */ 7299 WMI_HOST_RTT_CFG_ERROR, 7300 WMI_HOST_WMI_RTT_REJECT_MAX, 7301 } WMI_HOST_RTT_ERROR_INDICATOR; 7302 typedef struct { 7303 wmi_host_rtt_event_hdr hdr; 7304 WMI_HOST_RTT_ERROR_INDICATOR reject_reason; 7305 } wmi_host_rtt_error_report_event; 7306 7307 #if defined(AR9888) 7308 typedef enum { 7309 WMI_HOST_PROF_CPU_IDLE, 7310 WMI_HOST_PROF_PPDU_PROC, 7311 WMI_HOST_PROF_PPDU_POST, 7312 WMI_HOST_PROF_HTT_TX_INPUT, 7313 WMI_HOST_PROF_MSDU_ENQ, 7314 WMI_HOST_PROF_PPDU_POST_HAL, 7315 WMI_HOST_PROF_COMPUTE_TX_TIME, 7316 7317 /* Add new ID's above this. */ 7318 WMI_HOST_PROF_MAX_ID, 7319 } wmi_host_profile_id_t; 7320 #endif 7321 7322 #define WMI_HOST_WLAN_PROFILE_MAX_HIST 3 7323 #define WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 32 7324 7325 #if defined(AR9888) 7326 #define WMI_HOST_MAX_PROFILE WMI_HOST_PROF_MAX_ID 7327 #else 7328 #define WMI_HOST_MAX_PROFILE WMI_HOST_WLAN_PROFILE_MAX_BIN_CNT 7329 #endif 7330 7331 /** 7332 * struct wmi_host_wlan_profile - Host profile param 7333 * @id: profile id 7334 * @cnt: Count 7335 * @tot: 7336 * @min: minimum 7337 * @max: Mac 7338 * @hist_intvl: history interval 7339 * @hist: profile data history 7340 */ 7341 typedef struct { 7342 uint32_t id; 7343 uint32_t cnt; 7344 uint32_t tot; 7345 uint32_t min; 7346 uint32_t max; 7347 uint32_t hist_intvl; 7348 uint32_t hist[WMI_HOST_WLAN_PROFILE_MAX_HIST]; 7349 } wmi_host_wlan_profile_t; 7350 7351 /** 7352 * struct wmi_host_wlan_profile_ctx_t - profile context 7353 * @tot: time in us 7354 * @tx_msdu_cnt: MSDU TX count 7355 * @tx_mpdu_cnt: MPDU tx count 7356 * @tx_ppdu_cnt: PPDU tx count 7357 * @rx_msdu_cnt: MSDU RX count 7358 * @rx_mpdu_cnt: MPDU RXcount 7359 * @bin_count: Bin count 7360 */ 7361 typedef struct { 7362 uint32_t tot; 7363 uint32_t tx_msdu_cnt; 7364 uint32_t tx_mpdu_cnt; 7365 uint32_t tx_ppdu_cnt; 7366 uint32_t rx_msdu_cnt; 7367 uint32_t rx_mpdu_cnt; 7368 uint32_t bin_count; 7369 } wmi_host_wlan_profile_ctx_t; 7370 7371 /** 7372 * struct wmi_host_chan_info_event - Channel info WMI event 7373 * @pdev_id: pdev_id 7374 * @err_code: Error code 7375 * @freq: Channel freq 7376 * @cmd_flags: Read flags 7377 * @noise_floor: Noise Floor value 7378 * @rx_clear_count: rx clear count 7379 * @cycle_count: cycle count 7380 * @chan_tx_pwr_range: channel tx power per range 7381 * @chan_tx_pwr_tp: channel tx power per throughput 7382 * @rx_frame_count: rx frame count 7383 * @rx_11b_mode_data_duration: 11b mode data duration 7384 * @my_bss_rx_cycle_count: BSS rx cycle count 7385 * @tx_frame_cnt: tx frame count 7386 * @mac_clk_mhz: mac clock 7387 * @vdev_id: unique id identifying the VDEV 7388 */ 7389 typedef struct { 7390 uint32_t pdev_id; 7391 uint32_t err_code; 7392 uint32_t freq; 7393 uint32_t cmd_flags; 7394 uint32_t noise_floor; 7395 uint32_t rx_clear_count; 7396 uint32_t cycle_count; 7397 uint32_t chan_tx_pwr_range; 7398 uint32_t chan_tx_pwr_tp; 7399 uint32_t rx_frame_count; 7400 uint32_t rx_11b_mode_data_duration; 7401 uint32_t my_bss_rx_cycle_count; 7402 uint32_t tx_frame_cnt; 7403 uint32_t mac_clk_mhz; 7404 uint32_t vdev_id; 7405 } wmi_host_chan_info_event; 7406 7407 /** 7408 * struct wmi_host_pdev_channel_hopping_event 7409 * @pdev_id: pdev_id 7410 * @noise_floor_report_iter: Noise threshold iterations with high values 7411 * @noise_floor_total_iter: Total noise threshold iterations 7412 */ 7413 typedef struct { 7414 uint32_t pdev_id; 7415 uint32_t noise_floor_report_iter; 7416 uint32_t noise_floor_total_iter; 7417 } wmi_host_pdev_channel_hopping_event; 7418 7419 /** 7420 * struct wmi_host_pdev_bss_chan_info_event 7421 * @pdev_id: pdev_id 7422 * @freq: Units in MHz 7423 * @noise_floor: units are dBm 7424 * @rx_clear_count_low: 7425 * @rx_clear_count_high: 7426 * @cycle_count_low: 7427 * @cycle_count_high: 7428 * @tx_cycle_count_low: 7429 * @tx_cycle_count_high: 7430 * @rx_cycle_count_low: 7431 * @rx_cycle_count_high: 7432 * @rx_bss_cycle_count_low: 7433 * @rx_bss_cycle_count_high: 7434 * @reserved: 7435 */ 7436 typedef struct { 7437 uint32_t pdev_id; 7438 uint32_t freq; 7439 uint32_t noise_floor; 7440 uint32_t rx_clear_count_low; 7441 uint32_t rx_clear_count_high; 7442 uint32_t cycle_count_low; 7443 uint32_t cycle_count_high; 7444 uint32_t tx_cycle_count_low; 7445 uint32_t tx_cycle_count_high; 7446 uint32_t rx_cycle_count_low; 7447 uint32_t rx_cycle_count_high; 7448 uint32_t rx_bss_cycle_count_low; 7449 uint32_t rx_bss_cycle_count_high; 7450 uint32_t reserved; 7451 } wmi_host_pdev_bss_chan_info_event; 7452 7453 #define WMI_HOST_INST_STATS_INVALID_RSSI 0 7454 /** 7455 * struct wmi_host_inst_stats_resp 7456 * @iRSSI: Instantaneous RSSI 7457 * @peer_macaddr: peer mac address 7458 * @pdev_id: pdev_id 7459 */ 7460 typedef struct { 7461 uint32_t iRSSI; 7462 wmi_host_mac_addr peer_macaddr; 7463 uint32_t pdev_id; 7464 } wmi_host_inst_stats_resp; 7465 7466 /* Event definition and new structure addition to send event 7467 * to host to block/unblock tx data traffic based on peer_ast_idx or vdev id 7468 */ 7469 #define WMI_HOST_INVALID_PEER_AST_INDEX 0xffff 7470 #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_BLOCK 0x1 7471 #define WMI_HOST_TX_DATA_TRAFFIC_CTRL_UNBLOCK 0x2 7472 /** 7473 * struct wmi_host_tx_data_traffic_ctrl_event 7474 * @peer_ast_idx: For vdev based control, peer_ast_idx will be 7475 * WMI_INVALID_PEER_AST_INDEX 7476 * @vdev_id: only applies if peer_ast_idx == INVALID 7477 * @ctrl_cmd: WMI_TX_DATA_TRAFFIC_CTRL_BLOCK or 7478 * WMI_TX_DATA_TRAFFIC_CTRL_UNBLOCK 7479 */ 7480 typedef struct { 7481 uint32_t peer_ast_idx; 7482 uint32_t vdev_id; 7483 uint32_t ctrl_cmd; 7484 } wmi_host_tx_data_traffic_ctrl_event; 7485 7486 enum { 7487 WMI_HOST_ATF_PEER_STATS_DISABLED = 0, 7488 WMI_HOST_ATF_PEER_STATS_ENABLED = 1, 7489 }; 7490 7491 #define WMI_HOST_ATF_PEER_STATS_GET_PEER_AST_IDX(token_info) \ 7492 (token_info.field1 & 0xffff) 7493 7494 #define WMI_HOST_ATF_PEER_STATS_GET_USED_TOKENS(token_info) \ 7495 ((token_info.field2 & 0xffff0000) >> 16) 7496 7497 #define WMI_HOST_ATF_PEER_STATS_GET_UNUSED_TOKENS(token_info) \ 7498 (token_info.field2 & 0xffff) 7499 7500 #define WMI_HOST_ATF_PEER_STATS_SET_PEER_AST_IDX(token_info, peer_ast_idx) \ 7501 do { \ 7502 token_info.field1 &= 0xffff0000; \ 7503 token_info.field1 |= ((peer_ast_idx) & 0xffff); \ 7504 } while (0) 7505 7506 #define WMI_HOST_ATF_PEER_STATS_SET_USED_TOKENS(token_info, used_token) \ 7507 do { \ 7508 token_info.field2 &= 0x0000ffff; \ 7509 token_info.field2 |= (((used_token) & 0xffff) << 16); \ 7510 } while (0) 7511 7512 #define WMI_HOST_ATF_PEER_STATS_SET_UNUSED_TOKENS(token_info, unused_token) \ 7513 do { \ 7514 token_info.field2 &= 0xffff0000; \ 7515 token_info.field2 |= ((unused_token) & 0xffff); \ 7516 } while (0) 7517 7518 /** 7519 * struct wmi_host_atf_peer_stats_info 7520 * @field1: bits 15:0 peer_ast_index WMI_ATF_PEER_STATS_GET_PEER_AST_IDX 7521 * bits 31:16 reserved 7522 * @field2: bits 15:0 used tokens WMI_ATF_PEER_STATS_GET_USED_TOKENS 7523 * bits 31:16 unused tokens WMI_ATF_PEER_STATS_GET_UNUSED_TOKENS 7524 * @field3: for future use 7525 */ 7526 typedef struct { 7527 uint32_t field1; 7528 uint32_t field2; 7529 uint32_t field3; 7530 } wmi_host_atf_peer_stats_info; 7531 7532 /** 7533 * struct wmi_host_atf_peer_stats_event 7534 * @pdev_id: pdev_id 7535 * @num_atf_peers: number of peers in token_info_list 7536 * @comp_usable_airtime: computed usable airtime in tokens 7537 * @reserved[4]: reserved for future use 7538 * @wmi_host_atf_peer_stats_info token_info_list: list of num_atf_peers 7539 */ 7540 typedef struct { 7541 uint32_t pdev_id; 7542 uint32_t num_atf_peers; 7543 uint32_t comp_usable_airtime; 7544 uint32_t reserved[4]; 7545 wmi_host_atf_peer_stats_info token_info_list[1]; 7546 } wmi_host_atf_peer_stats_event; 7547 7548 /** 7549 * struct wmi_host_ath_dcs_cw_int 7550 * @channel: either number or freq in mhz 7551 */ 7552 typedef struct { 7553 uint32_t channel; 7554 } wmi_host_ath_dcs_cw_int; 7555 7556 #define WMI_MAX_POWER_DBG_ARGS 8 7557 7558 /** 7559 * struct wmi_power_dbg_params - power debug command parameter 7560 * @pdev_id: subsystem identifier 7561 * @module_id: parameter id 7562 * @num_arg: no of arguments 7563 * @args: arguments 7564 */ 7565 struct wmi_power_dbg_params { 7566 uint32_t pdev_id; 7567 uint32_t module_id; 7568 uint32_t num_args; 7569 uint32_t args[WMI_MAX_POWER_DBG_ARGS]; 7570 }; 7571 7572 /** 7573 * struct wmi_adaptive_dwelltime_params - the adaptive dwelltime params 7574 * @vdev_id: vdev id 7575 * @is_enabled: Adaptive dwell time is enabled/disabled 7576 * @dwelltime_mode: global default adaptive dwell mode 7577 * @lpf_weight: weight to calculate the average low pass 7578 * filter for channel congestion 7579 * @passive_mon_intval: intval to monitor wifi activity in passive scan in msec 7580 * @wifi_act_threshold: % of wifi activity used in passive scan 0-100 7581 * 7582 */ 7583 struct wmi_adaptive_dwelltime_params { 7584 uint32_t vdev_id; 7585 bool is_enabled; 7586 enum scan_dwelltime_adaptive_mode dwelltime_mode; 7587 uint8_t lpf_weight; 7588 uint8_t passive_mon_intval; 7589 uint8_t wifi_act_threshold; 7590 }; 7591 7592 /** 7593 * struct wmi_per_roam_config - per based roaming parameters 7594 * @enable: if PER based roaming is enabled/disabled 7595 * @tx_high_rate_thresh: high rate threshold at which PER based 7596 * roam will stop in tx path 7597 * @rx_high_rate_thresh: high rate threshold at which PER based 7598 * roam will stop in rx path 7599 * @tx_low_rate_thresh: rate below which traffic will be considered 7600 * for PER based roaming in Tx path 7601 * @rx_low_rate_thresh: rate below which traffic will be considered 7602 * for PER based roaming in Tx path 7603 * @tx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh 7604 * will be considered for PER based scan in tx path 7605 * @rx_rate_thresh_percnt: % above which when traffic is below low_rate_thresh 7606 * will be considered for PER based scan in rx path 7607 * @per_rest_time: time for which PER based roam will wait once it 7608 * issues a roam scan. 7609 * @tx_per_mon_time: Minimum time required to be considered as valid scenario 7610 * for PER based roam in tx path 7611 * @rx_per_mon_time: Minimum time required to be considered as valid scenario 7612 * for PER based roam in rx path 7613 * @min_candidate_rssi: Minimum RSSI threshold for candidate AP to be used for 7614 * PER based roaming 7615 */ 7616 struct wmi_per_roam_config { 7617 uint32_t enable; 7618 uint32_t tx_high_rate_thresh; 7619 uint32_t rx_high_rate_thresh; 7620 uint32_t tx_low_rate_thresh; 7621 uint32_t rx_low_rate_thresh; 7622 uint32_t tx_rate_thresh_percnt; 7623 uint32_t rx_rate_thresh_percnt; 7624 uint32_t per_rest_time; 7625 uint32_t tx_per_mon_time; 7626 uint32_t rx_per_mon_time; 7627 uint32_t min_candidate_rssi; 7628 }; 7629 7630 /** 7631 * struct wmi_per_roam_config_req: PER based roaming config request 7632 * @vdev_id: vdev id on which config needs to be set 7633 * @per_config: PER config 7634 */ 7635 struct wmi_per_roam_config_req { 7636 uint8_t vdev_id; 7637 struct wmi_per_roam_config per_config; 7638 }; 7639 7640 /** 7641 * struct wmi_fw_dump_seg_req - individual segment details 7642 * @seg_id - segment id. 7643 * @seg_start_addr_lo - lower address of the segment. 7644 * @seg_start_addr_hi - higher address of the segment. 7645 * @seg_length - length of the segment. 7646 * @dst_addr_lo - lower address of the destination buffer. 7647 * @dst_addr_hi - higher address of the destination buffer. 7648 * 7649 * This structure carries the information to firmware about the 7650 * individual segments. This structure is part of firmware memory 7651 * dump request. 7652 */ 7653 struct wmi_fw_dump_seg_req { 7654 uint8_t seg_id; 7655 uint32_t seg_start_addr_lo; 7656 uint32_t seg_start_addr_hi; 7657 uint32_t seg_length; 7658 uint32_t dst_addr_lo; 7659 uint32_t dst_addr_hi; 7660 }; 7661 7662 /** 7663 * enum wmi_userspace_log_level - Log level at userspace 7664 * @WMI_LOG_LEVEL_NO_COLLECTION: verbose_level 0 corresponds to no collection 7665 * @WMI_LOG_LEVEL_NORMAL_COLLECT: verbose_level 1 correspond to normal log 7666 * level with minimal user impact. This is the default value. 7667 * @WMI_LOG_LEVEL_ISSUE_REPRO: verbose_level 2 are enabled when user is lazily 7668 * trying to reproduce a problem, wifi performances and power can be impacted 7669 * but device should not otherwise be significantly impacted 7670 * @WMI_LOG_LEVEL_ACTIVE: verbose_level 3+ are used when trying to 7671 * actively debug a problem 7672 * 7673 * Various log levels defined in the userspace for logging applications 7674 */ 7675 enum wmi_userspace_log_level { 7676 WMI_LOG_LEVEL_NO_COLLECTION, 7677 WMI_LOG_LEVEL_NORMAL_COLLECT, 7678 WMI_LOG_LEVEL_ISSUE_REPRO, 7679 WMI_LOG_LEVEL_ACTIVE, 7680 }; 7681 7682 /** 7683 * HW mode config type replicated from FW header 7684 * @WMI_HOST_HW_MODE_SINGLE: Only one PHY is active. 7685 * @WMI_HOST_HW_MODE_DBS: Both PHYs are active in different bands, 7686 * one in 2G and another in 5G. 7687 * @WMI_HOST_HW_MODE_SBS_PASSIVE: Both PHYs are in passive mode (only rx) in 7688 * same band; no tx allowed. 7689 * @WMI_HOST_HW_MODE_SBS: Both PHYs are active in the same band. 7690 * Support for both PHYs within one band is planned 7691 * for 5G only(as indicated in WMI_MAC_PHY_CAPABILITIES), 7692 * but could be extended to other bands in the future. 7693 * The separation of the band between the two PHYs needs 7694 * to be communicated separately. 7695 * @WMI_HOST_HW_MODE_DBS_SBS: 3 PHYs, with 2 on the same band doing SBS 7696 * as in WMI_HW_MODE_SBS, and 3rd on the other band 7697 * @WMI_HOST_HW_MODE_DBS_OR_SBS: Two PHY with one PHY capabale of both 2G and 7698 * 5G. It can support SBS (5G + 5G) OR DBS (5G + 2G). 7699 * @WMI_HOST_HW_MODE_MAX: Max hw_mode_id. Used to indicate invalid mode. 7700 */ 7701 enum wmi_host_hw_mode_config_type { 7702 WMI_HOST_HW_MODE_SINGLE = 0, 7703 WMI_HOST_HW_MODE_DBS = 1, 7704 WMI_HOST_HW_MODE_SBS_PASSIVE = 2, 7705 WMI_HOST_HW_MODE_SBS = 3, 7706 WMI_HOST_HW_MODE_DBS_SBS = 4, 7707 WMI_HOST_HW_MODE_DBS_OR_SBS = 5, 7708 WMI_HOST_HW_MODE_MAX, 7709 }; 7710 7711 /* 7712 * struct wmi_host_peer_txmu_cnt_event 7713 * @tx_mu_transmitted - MU-MIMO tx count 7714 */ 7715 typedef struct { 7716 uint32_t tx_mu_transmitted; 7717 } wmi_host_peer_txmu_cnt_event; 7718 7719 #define MAX_SAR_LIMIT_ROWS_SUPPORTED 64 7720 /** 7721 * struct sar_limit_cmd_row - sar limits row 7722 * @band_id: Optional param for frequency band 7723 * See %enum wmi_sar_band_id_flags for possible values 7724 * @chain_id: Optional param for antenna chain id 7725 * @mod_id: Optional param for modulation scheme 7726 * See %enum wmi_sar_mod_id_flags for possible values 7727 * @limit_value: Mandatory param providing power limits in steps of 0.5 dbm 7728 * @validity_bitmap: bitmap of valid optional params in sar_limit_cmd_row struct 7729 * See WMI_SAR_*_VALID_MASK for possible values 7730 */ 7731 struct sar_limit_cmd_row { 7732 uint32_t band_id; 7733 uint32_t chain_id; 7734 uint32_t mod_id; 7735 uint32_t limit_value; 7736 uint32_t validity_bitmap; 7737 }; 7738 7739 /** 7740 * struct sar_limit_cmd_params - sar limits params 7741 * @sar_enable: flag to enable SAR 7742 * See %enum wmi_sar_feature_state_flags for possible values 7743 * @num_limit_rows: number of items in sar_limits 7744 * @commit_limits: indicates firmware to start apply new SAR values 7745 * @sar_limit_row_list: pointer to array of sar limit rows 7746 */ 7747 struct sar_limit_cmd_params { 7748 uint32_t sar_enable; 7749 uint32_t num_limit_rows; 7750 uint32_t commit_limits; 7751 struct sar_limit_cmd_row *sar_limit_row_list; 7752 }; 7753 7754 /** 7755 * struct sar_limit_event_row - sar limits row 7756 * @band_id: Frequency band. 7757 * See %enum wmi_sar_band_id_flags for possible values 7758 * @chain_id: Chain id 7759 * @mod_id: Modulation scheme 7760 * See %enum wmi_sar_mod_id_flags for possible values 7761 * @limit_value: Power limits in steps of 0.5 dbm that is currently active for 7762 * the given @band_id, @chain_id, and @mod_id 7763 */ 7764 struct sar_limit_event_row { 7765 uint32_t band_id; 7766 uint32_t chain_id; 7767 uint32_t mod_id; 7768 uint32_t limit_value; 7769 }; 7770 7771 /** 7772 * struct sar_limit_event - sar limits params 7773 * @sar_enable: Current status of SAR enablement. 7774 * See %enum wmi_sar_feature_state_flags for possible values 7775 * @num_limit_rows: number of items in sar_limits 7776 * @sar_limit_row: array of sar limit rows. Only @num_limit_rows 7777 * should be considered valid. 7778 */ 7779 struct sar_limit_event { 7780 uint32_t sar_enable; 7781 uint32_t num_limit_rows; 7782 struct sar_limit_event_row 7783 sar_limit_row[MAX_SAR_LIMIT_ROWS_SUPPORTED]; 7784 }; 7785 7786 /** 7787 * struct esp_estimation_event - esp airtime estimation event 7788 * @ac_airtime_percentage: Estimated Airtime 7789 * @pdev_id: PDEV_ID of Data 7790 */ 7791 struct esp_estimation_event { 7792 uint32_t ac_airtime_percentage; 7793 uint32_t pdev_id; 7794 }; 7795 7796 /* 7797 * struct wmi_peer_gid_userpos_list_event 7798 * @usr_list - User list 7799 */ 7800 #define GID_OVERLOAD_GROUP_COUNT 15 7801 typedef struct { 7802 uint32_t usr_list[GID_OVERLOAD_GROUP_COUNT]; 7803 } wmi_host_peer_gid_userpos_list_event; 7804 7805 /** 7806 * enum rcpi_measurement_type - for identifying type of rcpi measurement 7807 * @RCPI_MEASUREMENT_TYPE_AVG_MGMT: avg rcpi of mgmt frames 7808 * @RCPI_MEASUREMENT_TYPE_AVG_DATA: avg rcpi of data frames 7809 * @RCPI_MEASUREMENT_TYPE_LAST_MGMT: rcpi of last mgmt frame 7810 * @RCPI_MEASUREMENT_TYPE_LAST_DATA: rcpi of last data frame 7811 * @RCPI_MEASUREMENT_TYPE_INVALID: invalid rcpi measurement type 7812 */ 7813 enum rcpi_measurement_type { 7814 RCPI_MEASUREMENT_TYPE_AVG_MGMT = 0x1, 7815 RCPI_MEASUREMENT_TYPE_AVG_DATA = 0x2, 7816 RCPI_MEASUREMENT_TYPE_LAST_MGMT = 0x3, 7817 RCPI_MEASUREMENT_TYPE_LAST_DATA = 0x4, 7818 RCPI_MEASUREMENT_TYPE_INVALID = 0x5, 7819 }; 7820 7821 /** 7822 * struct rcpi_req - RCPI req parameter 7823 * @vdev_id: virtual device id 7824 * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type 7825 * @mac_addr: peer mac addr for which measurement is required 7826 */ 7827 struct rcpi_req { 7828 uint32_t vdev_id; 7829 enum rcpi_measurement_type measurement_type; 7830 uint8_t mac_addr[IEEE80211_ADDR_LEN]; 7831 }; 7832 7833 /** 7834 * struct rcpi_res - RCPI response parameter 7835 * @vdev_id: virtual device id 7836 * @measurement_type: type of rcpi from enum wmi_rcpi_measurement_type 7837 * @mac_addr: peer mac addr for which measurement is required 7838 * @rcpi_value: value of RCPI computed by firmware 7839 */ 7840 struct rcpi_res { 7841 uint32_t vdev_id; 7842 enum rcpi_measurement_type measurement_type; 7843 uint8_t mac_addr[IEEE80211_ADDR_LEN]; 7844 int32_t rcpi_value; 7845 }; 7846 7847 #define WMI_HOST_BOARD_MCN_STRING_MAX_SIZE 19 7848 #define WMI_HOST_BOARD_MCN_STRING_BUF_SIZE \ 7849 (WMI_HOST_BOARD_MCN_STRING_MAX_SIZE+1) /* null-terminator */ 7850 7851 typedef struct { 7852 uint32_t software_cal_version; 7853 uint32_t board_cal_version; 7854 /* board_mcn_detail: 7855 * Provide a calibration message string for the host to display. 7856 * Note: on a big-endian host, the 4 bytes within each uint32_t portion 7857 * of a WMI message will be automatically byteswapped by the copy engine 7858 * as the messages are transferred between host and target, to convert 7859 * between the target's little-endianness and the host's big-endianness. 7860 * Consequently, a big-endian host should manually unswap the bytes 7861 * within the board_mcn_detail string buffer to get the bytes back into 7862 * the desired natural order. 7863 */ 7864 uint8_t board_mcn_detail[WMI_HOST_BOARD_MCN_STRING_BUF_SIZE]; 7865 uint32_t cal_ok; /* filled with CALIBRATION_STATUS enum value */ 7866 } wmi_host_pdev_check_cal_version_event; 7867 7868 /** 7869 * enum WMI_HOST_CALIBRATION_STATUS - Host defined Enums for cal status 7870 * @WMI_HOST_NO_FEATURE: The board was calibrated with a meta 7871 * which did not have this feature 7872 * @WMI_HOST_CALIBRATION_OK: The calibration status is OK 7873 * @WMI_HOST_CALIBRATION_NOT_OK: The calibration status is NOT OK 7874 */ 7875 enum WMI_HOST_CALIBRATION_STATUS { 7876 WMI_HOST_NO_FEATURE = 0, 7877 WMI_HOST_CALIBRATION_OK, 7878 WMI_HOST_CALIBRATION_NOT_OK, 7879 }; 7880 7881 /** 7882 * struct wmi_host_pdev_utf_event - Host defined struct to hold utf event data 7883 * @data: Pointer to data 7884 * @datalen: Data length 7885 * @pdev_id: Pdev_id of data 7886 * 7887 */ 7888 struct wmi_host_pdev_utf_event { 7889 uint8_t *data; 7890 uint16_t datalen; 7891 uint32_t pdev_id; 7892 }; 7893 7894 /** 7895 * struct wmi_host_utf_seg_header_info - Host defined struct to map seg info in 7896 * UTF event 7897 * @len: segment length 7898 * @msgref: message reference 7899 * @segment_info: segment info 7900 * @pdev_id: pdev_id 7901 * 7902 */ 7903 struct wmi_host_utf_seg_header_info { 7904 uint32_t len; 7905 uint32_t msgref; 7906 uint32_t segment_info; 7907 uint32_t pdev_id; 7908 }; 7909 7910 /** 7911 * struct wmi_host_pdev_qvit_event - Host defined struct to hold qvit event data 7912 * @data: Pointer to data 7913 * @datalen: Data length 7914 * 7915 */ 7916 struct wmi_host_pdev_qvit_event { 7917 uint8_t *data; 7918 uint16_t datalen; 7919 uint32_t pdev_id; 7920 }; 7921 7922 /** 7923 * struct wmi_host_peer_delete_response_event - Peer Delete response event param 7924 * @vdev_id: vdev id 7925 * @mac_address: Peer Mac Address 7926 * 7927 */ 7928 struct wmi_host_peer_delete_response_event { 7929 uint32_t vdev_id; 7930 struct qdf_mac_addr mac_address; 7931 }; 7932 7933 /** 7934 * @struct wmi_host_dcs_interference_param 7935 * @interference_type: Type of DCS Interference 7936 * @uint32_t pdev_id: pdev id 7937 */ 7938 struct wmi_host_dcs_interference_param { 7939 uint32_t interference_type; 7940 uint32_t pdev_id; 7941 }; 7942 7943 /* 7944 * struct wmi_host_fips_event_param: FIPS event param 7945 * @pdev_id: pdev id 7946 * @error_status: Error status: 0 (no err), 1, or OPER_TIMEOUR 7947 * @data_len: FIPS data length 7948 * @data: pointer to data 7949 */ 7950 struct wmi_host_fips_event_param { 7951 uint32_t pdev_id; 7952 uint32_t error_status; 7953 uint32_t data_len; 7954 uint32_t *data; 7955 }; 7956 7957 /** 7958 * struct wmi_host_proxy_ast_reserve_param 7959 * @pdev_id: pdev id 7960 * @result: result 7961 */ 7962 struct wmi_host_proxy_ast_reserve_param { 7963 uint32_t pdev_id; 7964 uint32_t result; 7965 }; 7966 7967 /** 7968 * struct wmi_host_pdev_band_to_mac - freq range for mac 7969 * @pdev_id: PDEV ID to identifiy mac 7970 * @start_freq: start frequency value 7971 * @end_freq: end frequency value 7972 */ 7973 struct wmi_host_pdev_band_to_mac { 7974 uint32_t pdev_id; 7975 uint32_t start_freq; 7976 uint32_t end_freq; 7977 }; 7978 #define WMI_HOST_MAX_PDEV 3 7979 7980 #ifdef OL_ATH_SMART_LOGGING 7981 7982 #define WMI_HOST_SMART_LOG_SCENARIO_SET(flag, scenario) ((flag) |= (scenario)) 7983 #define WMI_HOST_SMART_LOG_SCENARIO_GET(flag, scenario) ((flag) & (scenario)) 7984 7985 /** 7986 * enum wmi_host_smart_log_scenario - Smart log scenarios to be enabled/disabled 7987 * @WMI_HOST_SMART_LOG_ALL: All smart logging features. 7988 * @WMI_HOST_SMART_LOG_CE_FULL_DETECT_BY_FW: CE with full detect by FW. 7989 * @WMI_HOST_SMART_LOG_TX_RX_TIMEOUT: Tx/Rx timeout. 7990 * @WMI_HOST_SMART_LOG_STA_KICKOUT: STA Kickout. 7991 * @WMI_HOST_SMART_LOG_BCN_CMD_FAILURE: Beacon command failure. 7992 * @WMI_HOST_SMART_LOG_P1_PING_FAILURE: P1 ping failure. Ping failure detection 7993 * is done by host entities. So, host should be able to control the 7994 * enable/disable of this feature. Yet, this is provided in case the 7995 * corresponding FW specific debugs alone have to be enabled/disabled. 7996 * @WMI_HOST_SMART_LOG_CONNECTION_FAILURE: Connection failure. Connection 7997 * failure detection is done by host entities. So, host should be able to 7998 * control the enable/disable of this feature. Yet, this is provided in case the 7999 * corresponding FW specific debugs alone have to be enabled/disabled. 8000 * @WMI_HOST_SMART_LOG_FW_INITIATED_PKT_LOG: FW Initiated packetlog. 8001 * @WMI_HOST_SMART_LOG_EXTENSION_1: If WMI_HOST_SMART_LOG_EXTENSION_1 is set, 8002 * then the 'log_case_ext_1' field in 'wmi_smart_logging' is used; else 8003 * log_case_ext_1 is ignored. 8004 */ 8005 enum wmi_host_smart_log_scenario { 8006 WMI_HOST_SMART_LOG_ALL = 0x0, 8007 WMI_HOST_SMART_LOG_CE_FULL_DETECT_BY_FW = 0x1, 8008 WMI_HOST_SMART_LOG_TX_RX_TIMEOUT = 0x2, 8009 WMI_HOST_SMART_LOG_STA_KICKOUT = 0x4, 8010 WMI_HOST_SMART_LOG_BCN_CMD_FAILURE = 0x8, 8011 WMI_HOST_SMART_LOG_P1_PING_FAILURE = 0x10, 8012 WMI_HOST_SMART_LOG_CONNECTION_FAILURE = 0x20, 8013 WMI_HOST_SMART_LOG_FW_INITIATED_PKT_LOG = 0x40, 8014 8015 /* New scenarios to be added here */ 8016 8017 WMI_HOST_SMART_LOG_EXTENSION_1 = 0x80000000, 8018 }; 8019 8020 /** 8021 * struct wmi_fatal_condition_event - Fatal condition event param 8022 * @type: Type of event 8023 * @subtype: Subtype of event 8024 * @type_subtype_specific_data: Data specific to combination of type and 8025 * subtype. This is held in a union with the original "reserved0" for backward 8026 * compatibility with any code that might refer to it. The previously-reserved 8027 * field now holds data under some conditions. The kind of data depends on the 8028 * above "type" and "subtype" fields. The interpretation of the 8029 * type_subtype_specific_data field based on different type + subtype values is 8030 * shown below: 8031 * 1. type == WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG + subtype 8032 * == WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START -> 8033 * type_subtype_specific_data = WMI_HOST_PKTLOG_EVENT 8034 * For any type+subtype combinations not listed above, the recipient is expected 8035 * to ignore the type_subtype_specific_data field. 8036 */ 8037 struct wmi_fatal_condition_event { 8038 uint32_t type; 8039 uint32_t subtype; 8040 union { 8041 uint32_t reserved0; 8042 uint32_t type_subtype_specific_data; 8043 }; 8044 }; 8045 8046 /*Currently the Max fatal events is 3 */ 8047 #define FATAL_EVENTS_MAX 3 8048 8049 /** 8050 * struct wmi_debug_fatal_events: Fatal events list 8051 * @num_events:Number of events 8052 * @event[FATAL_EVENTS_MAX]: Each event data 8053 */ 8054 struct wmi_debug_fatal_events { 8055 uint32_t num_events; 8056 struct wmi_fatal_condition_event event[FATAL_EVENTS_MAX]; 8057 }; 8058 8059 /** 8060 * enum wmi_host_fatal_condition_type - Values that 'type' can take in 8061 * wmi_fatal_condition_event 8062 * @WMI_HOST_FATAL_CONDITION_EVENT_COMPLETION: Fatal condition event completion 8063 * @WMI_HOST_FATAL_CONDITION_CE_FAILURE: CE failure 8064 * @WMI_HOST_FATAL_CONDITION_TIMEOUTS: Communication timeouts 8065 * @WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE: Connection issue 8066 * @WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG: Configuration for FW initiated 8067 * packetlog 8068 */ 8069 enum wmi_host_fatal_condition_type { 8070 WMI_HOST_FATAL_CONDITION_EVENT_COMPLETION, 8071 WMI_HOST_FATAL_CONDITION_CE_FAILURE, 8072 WMI_HOST_FATAL_CONDITION_TIMEOUTS, 8073 WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE, 8074 WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG, 8075 }; 8076 8077 /** 8078 * enum wmi_host_fatal_condition_subtype_timeouts - Possible subtypes for 8079 * WMI_HOST_FATAL_CONDITION_TIMEOUTS 8080 * @WMI_HOST_FATAL_SUBTYPE_TX_TIMEOUT: Tx timeout 8081 * @WMI_HOST_FATAL_SUBTYPE_RX_TIMEOUT: Rx timeout 8082 */ 8083 enum wmi_host_fatal_condition_subtype_timeouts { 8084 WMI_HOST_FATAL_SUBTYPE_TX_TIMEOUT, 8085 WMI_HOST_FATAL_SUBTYPE_RX_TIMEOUT, 8086 }; 8087 8088 /** 8089 * enum wmi_host_fatal_condition_subtype_connection_issue - Possible subtypes 8090 * for WMI_HOST_FATAL_CONDITION_CONNECTION_ISSUE 8091 * @WMI_HOST_FATAL_SUBTYPE_STA_KICKOUT: STA Kickout 8092 * @WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_START_DEBUG: Start debugging for P1 8093 * ping failure 8094 * @WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_STOP_DEBUG: Stop debugging for P1 8095 * ping failure 8096 * @WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_START_DEBUG: Start debugging for 8097 * connection failure 8098 * @WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_STOP_DEBUG: Stop debugging for 8099 * connection failure 8100 */ 8101 enum wmi_host_fatal_condition_subtype_connection_issue { 8102 WMI_HOST_FATAL_SUBTYPE_STA_KICKOUT, 8103 WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_START_DEBUG, 8104 WMI_HOST_FATAL_SUBTYPE_P1_PING_FAILURE_STOP_DEBUG, 8105 WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_START_DEBUG, 8106 WMI_HOST_FATAL_SUBTYPE_CONNECTION_FAILURE_STOP_DEBUG, 8107 }; 8108 8109 /** 8110 * enum wmi_host_fatal_condition_subtype_packet_log_config - Possible subtypes 8111 * for WMI_HOST_FATAL_CONDITION_PACKET_LOG_CONFIG 8112 * @WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START: Start FW initiated packetlog 8113 * @WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_STOP: Stop FW initiated packetlog 8114 */ 8115 enum wmi_host_fatal_condition_subtype_packet_log_config { 8116 WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_START, 8117 WMI_HOST_FATAL_SUBTYPE_PACKET_LOG_CONFIG_STOP, 8118 }; 8119 8120 #endif /* OL_ATH_SMART_LOGGING */ 8121 8122 /** 8123 * struct wmi_init_cmd_param - INIT command params 8124 * @target_resource_config: pointer to resource config 8125 * @num_mem_chunks: number of memory chunks 8126 * @struct wmi_host_mem_chunk: pointer to memory chunks 8127 * @hw_mode_index: HW mode index chosen 8128 * @num_band_to_mac: Number of band to mac setting 8129 * @struct wmi_host_pdev_band_to_mac: band to mac setting 8130 */ 8131 struct wmi_init_cmd_param { 8132 target_resource_config *res_cfg; 8133 uint8_t num_mem_chunks; 8134 struct wmi_host_mem_chunk *mem_chunks; 8135 uint32_t hw_mode_id; 8136 uint32_t num_band_to_mac; 8137 struct wmi_host_pdev_band_to_mac band_to_mac[WMI_HOST_MAX_PDEV]; 8138 }; 8139 8140 /** 8141 * struct pdev_csa_switch_count_status - CSA switch count status event param 8142 * @pdev_id: Physical device identifier 8143 * @current_switch_count: Current CSA switch count 8144 * @num_vdevs: Number of vdevs that need restart 8145 * @vdev_ids: Array containing the vdev ids that need restart 8146 */ 8147 struct pdev_csa_switch_count_status { 8148 uint32_t pdev_id; 8149 uint32_t current_switch_count; 8150 uint32_t num_vdevs; 8151 uint32_t *vdev_ids; 8152 }; 8153 8154 /** 8155 * enum wmi_host_active-apf_mode - FW_ACTIVE_APF_MODE, replicated from FW header 8156 * @WMI_HOST_ACTIVE_APF_DISABLED: APF is disabled for all packets in active mode 8157 * @WMI_HOST_ACTIVE_APF_ENABLED: APF is enabled for all packets in active mode 8158 * @WMI_HOST_ACTIVE_APF_ADAPTIVE: APF is enabled for packets up to some 8159 * threshold in active mode 8160 */ 8161 enum wmi_host_active_apf_mode { 8162 WMI_HOST_ACTIVE_APF_DISABLED = (1 << 1), 8163 WMI_HOST_ACTIVE_APF_ENABLED = (1 << 2), 8164 WMI_HOST_ACTIVE_APF_ADAPTIVE = (1 << 3) 8165 }; 8166 8167 /** 8168 * struct coex_config_params - Coex config command params 8169 * @vdev_id: Virtual AP device identifier 8170 * @config_type: Configuration type - wmi_coex_config_type enum 8171 * @config_arg1: Configuration argument based on config type 8172 * @config_arg2: Configuration argument based on config type 8173 * @config_arg3: Configuration argument based on config type 8174 * @config_arg4: Configuration argument based on config type 8175 * @config_arg5: Configuration argument based on config type 8176 * @config_arg6: Configuration argument based on config type 8177 */ 8178 struct coex_config_params { 8179 uint32_t vdev_id; 8180 uint32_t config_type; 8181 uint32_t config_arg1; 8182 uint32_t config_arg2; 8183 uint32_t config_arg3; 8184 uint32_t config_arg4; 8185 uint32_t config_arg5; 8186 uint32_t config_arg6; 8187 }; 8188 8189 #define WMI_HOST_PDEV_ID_SOC 0xFF 8190 #define WMI_HOST_PDEV_ID_0 0 8191 #define WMI_HOST_PDEV_ID_1 1 8192 #define WMI_HOST_PDEV_ID_2 2 8193 8194 /** 8195 * struct tbttoffset_params - Tbttoffset event params 8196 * @vdev_id: Virtual AP device identifier 8197 * @tbttoffset : Tbttoffset for the virtual AP device 8198 */ 8199 struct tbttoffset_params { 8200 uint32_t vdev_id; 8201 uint32_t tbttoffset; 8202 }; 8203 8204 #define WMI_SCAN_CLIENT_MAX 7 8205 8206 /** 8207 * struct wmi_dbs_scan_sel_params - DBS scan selection params 8208 * @num_clients: Number of scan clients dutycycle 8209 * @pdev_id: pdev_id for identifying the MAC 8210 * @module_id: scan client module id 8211 * @num_dbs_scans: number of DBS scans 8212 * @num_non_dbs_scans: number of non-DBS scans 8213 */ 8214 struct wmi_dbs_scan_sel_params { 8215 uint32_t num_clients; 8216 uint32_t pdev_id; 8217 uint32_t module_id[WMI_SCAN_CLIENT_MAX]; 8218 uint32_t num_dbs_scans[WMI_SCAN_CLIENT_MAX]; 8219 uint32_t num_non_dbs_scans[WMI_SCAN_CLIENT_MAX]; 8220 }; 8221 8222 /** 8223 * struct wmi_limit_off_chan_param - limit off channel parameters 8224 * @vdev_id: vdev id 8225 * @status: status of the command (enable/disable) 8226 * @max_offchan_time: max off channel time 8227 * @rest_time: home channel time 8228 * @skip_dfs_chans: skip dfs channels during scan 8229 */ 8230 struct wmi_limit_off_chan_param { 8231 uint32_t vdev_id; 8232 bool status; 8233 uint32_t max_offchan_time; 8234 uint32_t rest_time; 8235 bool skip_dfs_chans; 8236 }; 8237 8238 /** 8239 * struct wmi_mawc_roam_params - Motion Aided wireless connectivity params 8240 * @vdev_id: VDEV on which the parameters should be applied 8241 * @enable: MAWC roaming feature enable/disable 8242 * @traffic_load_threshold: Traffic threshold in kBps for MAWC roaming 8243 * @best_ap_rssi_threshold: AP RSSI Threshold for MAWC roaming 8244 * @rssi_stationary_high_adjust: High RSSI adjustment value to suppress scan 8245 * @rssi_stationary_low_adjust: Low RSSI adjustment value to suppress scan 8246 */ 8247 struct wmi_mawc_roam_params { 8248 uint8_t vdev_id; 8249 bool enable; 8250 uint32_t traffic_load_threshold; 8251 uint32_t best_ap_rssi_threshold; 8252 uint8_t rssi_stationary_high_adjust; 8253 uint8_t rssi_stationary_low_adjust; 8254 }; 8255 /** 8256 * struct wmi_btm_config - BSS Transition Management offload params 8257 * @vdev_id: VDEV on which the parameters should be applied 8258 * @btm_offload_config: BTM config 8259 * @btm_solicited_timeout: Timeout value for waiting BTM request 8260 * @btm_max_attempt_cnt: Maximum attempt for sending BTM query to ESS 8261 * @btm_sticky_time: Stick time after roaming to new AP by BTM 8262 */ 8263 struct wmi_btm_config { 8264 uint8_t vdev_id; 8265 uint32_t btm_offload_config; 8266 uint32_t btm_solicited_timeout; 8267 uint32_t btm_max_attempt_cnt; 8268 uint32_t btm_sticky_time; 8269 }; 8270 8271 /** 8272 * struct set_arp_stats - set/reset arp stats 8273 * @vdev_id: session id 8274 * @flag: enable/disable stats 8275 * @pkt_type: type of packet(1 - arp) 8276 * @ip_addr: subnet ipv4 address in case of encrypted packets 8277 * @pkt_type_bitmap: pkt bitmap 8278 * @tcp_src_port: tcp src port for pkt tracking 8279 * @tcp_dst_port: tcp dst port for pkt tracking 8280 * @icmp_ipv4: target ipv4 address to track ping packets 8281 * @reserved: reserved 8282 */ 8283 struct set_arp_stats { 8284 uint32_t vdev_id; 8285 uint8_t flag; 8286 uint8_t pkt_type; 8287 uint32_t ip_addr; 8288 uint32_t pkt_type_bitmap; 8289 uint32_t tcp_src_port; 8290 uint32_t tcp_dst_port; 8291 uint32_t icmp_ipv4; 8292 uint32_t reserved; 8293 }; 8294 8295 /** 8296 * struct get_arp_stats - get arp stats from firmware 8297 * @pkt_type: packet type(1 - ARP) 8298 * @vdev_id: session id 8299 */ 8300 struct get_arp_stats { 8301 uint8_t pkt_type; 8302 uint32_t vdev_id; 8303 }; 8304 8305 /** 8306 * struct wmi_host_ready_ev_param - Data revieved in ready event 8307 * @status: FW init status. Success or Failure. 8308 * @num_dscp_table: Number of DSCP table supported in FW 8309 * @num_extra_mac_addr: Extra mac address present in ready event. Used 8310 * in DBDC mode to provide multiple mac per pdev. 8311 * @num_total_peer: Total number of peers FW could allocate. Zero means 8312 * FW could allocate num peers requested by host in init. 8313 * Otherwise, host need update it max_peer to this value. 8314 * @num_extra_peer: Number of extra peers created and used within FW. Host 8315 * should expect peer_id can be num_total_peer + num_extra_peer 8316 * but it can create only upto num_total_peer. 8317 * @agile_capability: Boolean specification of whether the target supports 8318 * agile DFS, by means of using one 80 MHz radio chain for 8319 * radar detection, concurrently with using another radio 8320 * chain for non-160 MHz regular operation. 8321 */ 8322 struct wmi_host_ready_ev_param { 8323 uint32_t status; 8324 uint32_t num_dscp_table; 8325 uint32_t num_extra_mac_addr; 8326 uint32_t num_total_peer; 8327 uint32_t num_extra_peer; 8328 bool agile_capability; 8329 }; 8330 8331 enum bcn_offload_control_param { 8332 BCN_OFFLD_CTRL_TX_DISABLE = 0, 8333 BCN_OFFLD_CTRL_TX_ENABLE, 8334 BCN_OFFLD_CTRL_SWBA_DISABLE, 8335 BCN_OFFLD_CTRL_SWBA_ENABLE, 8336 }; 8337 8338 /** 8339 * struct bcn_offload_control - Beacon offload control params 8340 * @vdev_id: vdev identifer of VAP to control beacon tx 8341 * @bcn_ctrl_op: values from enum bcn_offload_control_param 8342 */ 8343 struct bcn_offload_control { 8344 uint32_t vdev_id; 8345 enum bcn_offload_control_param bcn_ctrl_op; 8346 }; 8347 8348 /** 8349 * struct wds_entry - WDS entry structure 8350 * @peer_mac: peer mac 8351 * @wds_mac: wds mac address 8352 * @flags: flags 8353 */ 8354 struct wdsentry { 8355 u_int8_t peer_mac[IEEE80211_ADDR_LEN]; 8356 u_int8_t wds_mac[IEEE80211_ADDR_LEN]; 8357 uint32_t flags; 8358 }; 8359 8360 #define WMI_HOST_DBR_RING_ADDR_LO_S 0 8361 #define WMI_HOST_DBR_RING_ADDR_LO 0xffffffff 8362 8363 #define WMI_HOST_DBR_RING_ADDR_LO_GET(dword) \ 8364 WMI_HOST_F_MS(dword, WMI_HOST_DBR_RING_ADDR_LO) 8365 #define WMI_HOST_DBR_RING_ADDR_LO_SET(dword, val) \ 8366 WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_RING_ADDR_LO) 8367 8368 #define WMI_HOST_DBR_RING_ADDR_HI_S 0 8369 #define WMI_HOST_DBR_RING_ADDR_HI 0xf 8370 8371 #define WMI_HOST_DBR_RING_ADDR_HI_GET(dword) \ 8372 WMI_HOST_F_MS(dword, WMI_HOST_DBR_RING_ADDR_HI) 8373 #define WMI_HOST_DBR_RING_ADDR_HI_SET(dword, val) \ 8374 WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_RING_ADDR_HI) 8375 8376 #define WMI_HOST_DBR_DATA_ADDR_LO_S 0 8377 #define WMI_HOST_DBR_DATA_ADDR_LO 0xffffffff 8378 8379 #define WMI_HOST_DBR_DATA_ADDR_LO_GET(dword) \ 8380 WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_LO) 8381 #define WMI_HOST_DBR_DATA_ADDR_LO_SET(dword, val) \ 8382 WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_LO) 8383 8384 #define WMI_HOST_DBR_DATA_ADDR_HI_S 0 8385 #define WMI_HOST_DBR_DATA_ADDR_HI 0xf 8386 8387 #define WMI_HOST_DBR_DATA_ADDR_HI_GET(dword) \ 8388 WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_HI) 8389 #define WMI_HOST_DBR_DATA_ADDR_HI_SET(dword, val) \ 8390 WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_HI) 8391 8392 #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_S 12 8393 #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA 0x7fffff 8394 8395 #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_GET(dword) \ 8396 WMI_HOST_F_MS(dword, WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA) 8397 #define WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA_SET(dword, val) \ 8398 WMI_HOST_F_RMW(dword, val, WMI_HOST_DBR_DATA_ADDR_HI_HOST_DATA) 8399 8400 /** 8401 * struct direct_buf_rx_metadata: direct buffer metadata 8402 * 8403 * @noisefloor: noisefloor 8404 */ 8405 struct direct_buf_rx_metadata { 8406 int32_t noisefloor[WMI_HOST_MAX_NUM_CHAINS]; 8407 }; 8408 8409 /** 8410 * struct direct_buf_rx_entry: direct buffer rx release entry structure 8411 * 8412 * @addr_lo: LSB 32-bits of the buffer 8413 * @addr_hi: MSB 32-bits of the buffer 8414 * @len: Length of the buffer 8415 */ 8416 struct direct_buf_rx_entry { 8417 uint32_t paddr_lo; 8418 uint32_t paddr_hi; 8419 uint32_t len; 8420 }; 8421 8422 /** 8423 * struct direct_buf_rx_rsp: direct buffer rx response structure 8424 * 8425 * @pdev_id: Index of the pdev for which response is received 8426 * @mod_mod: Index of the module for which respone is received 8427 * @num_buf_release_entry: Number of buffers released through event 8428 * @dbr_entries: Pointer to direct buffer rx entry struct 8429 */ 8430 struct direct_buf_rx_rsp { 8431 uint32_t pdev_id; 8432 uint32_t mod_id; 8433 uint32_t num_buf_release_entry; 8434 uint32_t num_meta_data_entry; 8435 struct direct_buf_rx_entry *dbr_entries; 8436 }; 8437 8438 /** 8439 * struct direct_buf_rx_cfg_req: direct buffer rx config request structure 8440 * 8441 * @pdev_id: Index of the pdev for which response is received 8442 * @mod_id: Index of the module for which respone is received 8443 * @base_paddr_lo: Lower 32bits of ring base address 8444 * @base_paddr_hi: Higher 32bits of ring base address 8445 * @head_idx_paddr_lo: Lower 32bits of head idx register address 8446 * @head_idx_paddr_hi: Higher 32bits of head idx register address 8447 * @tail_idx_paddr_lo: Lower 32bits of tail idx register address 8448 * @tail_idx_paddr_hi: Higher 32bits of tail idx register address 8449 * @buf_size: Size of the buffer for each pointer in the ring 8450 * @num_elems: Number of pointers allocated and part of the source ring 8451 */ 8452 struct direct_buf_rx_cfg_req { 8453 uint32_t pdev_id; 8454 uint32_t mod_id; 8455 uint32_t base_paddr_lo; 8456 uint32_t base_paddr_hi; 8457 uint32_t head_idx_paddr_lo; 8458 uint32_t head_idx_paddr_hi; 8459 uint32_t tail_idx_paddr_hi; 8460 uint32_t tail_idx_paddr_lo; 8461 uint32_t buf_size; 8462 uint32_t num_elems; 8463 uint32_t event_timeout_ms; 8464 uint32_t num_resp_per_event; 8465 }; 8466 8467 /** 8468 * struct wmi_obss_detection_cfg_param - obss detection cfg 8469 * @vdev_id: vdev id 8470 * @obss_detect_period_ms: detection period in ms 8471 * @obss_11b_ap_detect_mode: detect whether there is 11b ap/ibss 8472 * @obss_11b_sta_detect_mode: detect whether there is 11b sta 8473 * connected with other APs 8474 * @obss_11g_ap_detect_mode: detect whether there is 11g AP 8475 * @obss_11a_detect_mode: detect whether there is legacy 11a traffic 8476 * @obss_ht_legacy_detect_mode: detect whether there is ap which is 8477 * ht legacy mode 8478 * @obss_ht_mixed_detect_mode: detect whether there is ap which is ht mixed mode 8479 * @obss_ht_20mhz_detect_mode: detect whether there is ap which has 20M only 8480 * station 8481 */ 8482 struct wmi_obss_detection_cfg_param { 8483 uint32_t vdev_id; 8484 uint32_t obss_detect_period_ms; 8485 uint32_t obss_11b_ap_detect_mode; 8486 uint32_t obss_11b_sta_detect_mode; 8487 uint32_t obss_11g_ap_detect_mode; 8488 uint32_t obss_11a_detect_mode; 8489 uint32_t obss_ht_legacy_detect_mode; 8490 uint32_t obss_ht_mixed_detect_mode; 8491 uint32_t obss_ht_20mhz_detect_mode; 8492 }; 8493 8494 /** 8495 * enum wmi_obss_detection_reason - obss detection event reasons 8496 * @OBSS_OFFLOAD_DETECTION_DISABLED: OBSS detection disabled 8497 * @OBSS_OFFLOAD_DETECTION_PRESENT: OBSS present detection 8498 * @OBSS_OFFLOAD_DETECTION_ABSENT: OBSS absent detection 8499 * 8500 * Defines different types of reasons for obss detection event from firmware. 8501 */ 8502 enum wmi_obss_detection_reason { 8503 OBSS_OFFLOAD_DETECTION_DISABLED = 0, 8504 OBSS_OFFLOAD_DETECTION_PRESENT = 1, 8505 OBSS_OFFLOAD_DETECTION_ABSENT = 2, 8506 }; 8507 8508 /** 8509 * struct wmi_obss_detect_info - OBSS detection info from firmware 8510 * @vdev_id: ID of the vdev to which this info belongs. 8511 * @reason: Indicate if present or Absent detection, 8512 * also if not supported offload for this vdev. 8513 * @matched_detection_masks: Detection bit map. 8514 * @matched_bssid_addr: MAC address valid for only if info is present detection. 8515 */ 8516 struct wmi_obss_detect_info { 8517 uint32_t vdev_id; 8518 enum wmi_obss_detection_reason reason; 8519 uint32_t matched_detection_masks; 8520 uint8_t matched_bssid_addr[IEEE80211_ADDR_LEN]; 8521 }; 8522 8523 /** 8524 * @time_offset: time offset after 11k offload command to trigger a neighbor 8525 * report request (in seconds) 8526 * @low_rssi_offset: Offset from rssi threshold to trigger a neighbor 8527 * report request (in dBm) 8528 * @bmiss_count_trigger: Number of beacon miss events to trigger neighbor 8529 * report request 8530 * @per_threshold_offset: offset from PER threshold to trigger neighbor 8531 * report request (in %) 8532 * @neighbor_report_cache_timeout: timeout after which new trigger can enable 8533 * sending of a neighbor report request (in seconds) 8534 * @max_neighbor_report_req_cap: max number of neighbor report requests that 8535 * can be sent to the peer in the current session 8536 * @ssid: Current connect SSID info 8537 */ 8538 struct wmi_11k_offload_neighbor_report_params { 8539 uint32_t time_offset; 8540 uint32_t low_rssi_offset; 8541 uint32_t bmiss_count_trigger; 8542 uint32_t per_threshold_offset; 8543 uint32_t neighbor_report_cache_timeout; 8544 uint32_t max_neighbor_report_req_cap; 8545 struct mac_ssid ssid; 8546 }; 8547 8548 /** 8549 * struct wmi_11k_offload_params - offload 11k features to FW 8550 * @vdev_id: vdev id 8551 * @offload_11k_bitmask: bitmask to specify offloaded features 8552 * B0: Neighbor Report Request offload 8553 * B1-B31: Reserved 8554 * @neighbor_report_params: neighbor report offload params 8555 */ 8556 struct wmi_11k_offload_params { 8557 uint32_t vdev_id; 8558 uint32_t offload_11k_bitmask; 8559 struct wmi_11k_offload_neighbor_report_params neighbor_report_params; 8560 }; 8561 8562 /** 8563 * struct wmi_invoke_neighbor_report_params - Invoke neighbor report request 8564 * from IW to FW 8565 * @vdev_id: vdev id 8566 * @send_resp_to_host: bool to send response to host or not 8567 * @ssid: ssid given from the IW command 8568 */ 8569 struct wmi_invoke_neighbor_report_params { 8570 uint32_t vdev_id; 8571 uint32_t send_resp_to_host; 8572 struct mac_ssid ssid; 8573 }; 8574 8575 /** 8576 * enum wmi_obss_color_collision_evt_type - bss color collision event type 8577 * @OBSS_COLOR_COLLISION_DETECTION_DISABLE: OBSS color detection disabled 8578 * @OBSS_COLOR_COLLISION_DETECTION: OBSS color collision detection 8579 * @OBSS_COLOR_FREE_SLOT_TIMER_EXPIRY: OBSS free slot detection with 8580 * within expiry period 8581 * @OBSS_COLOR_FREE_SLOT_AVAILABLE: OBSS free slot detection 8582 * 8583 * Defines different types of type for obss color collision event type. 8584 */ 8585 enum wmi_obss_color_collision_evt_type { 8586 OBSS_COLOR_COLLISION_DETECTION_DISABLE = 0, 8587 OBSS_COLOR_COLLISION_DETECTION = 1, 8588 OBSS_COLOR_FREE_SLOT_TIMER_EXPIRY = 2, 8589 OBSS_COLOR_FREE_SLOT_AVAILABLE = 3, 8590 }; 8591 8592 /** 8593 * struct wmi_obss_color_collision_cfg_param - obss color collision cfg 8594 * @vdev_id: vdev id 8595 * @flags: proposed for future use cases, currently not used. 8596 * @evt_type: bss color collision event. 8597 * @current_bss_color: current bss color. 8598 * @detection_period_ms: scan interval for both AP and STA mode. 8599 * @scan_period_ms: scan period for passive scan to detect collision. 8600 * @free_slot_expiry_time_ms: FW to notify host at timer expiry after 8601 * which Host will disable the bss color. 8602 */ 8603 struct wmi_obss_color_collision_cfg_param { 8604 uint32_t vdev_id; 8605 uint32_t flags; 8606 enum wmi_obss_color_collision_evt_type evt_type; 8607 uint32_t current_bss_color; 8608 uint32_t detection_period_ms; 8609 uint32_t scan_period_ms; 8610 uint32_t free_slot_expiry_time_ms; 8611 }; 8612 8613 /** 8614 * struct wmi_obss_color_collision_info - bss color detection info from firmware 8615 * @vdev_id: ID of the vdev to which this info belongs. 8616 * @evt_type: bss color collision event. 8617 * @obss_color_bitmap_bit0to31: Bit set indicating BSS color present. 8618 * @obss_color_bitmap_bit32to63: Bit set indicating BSS color present. 8619 */ 8620 struct wmi_obss_color_collision_info { 8621 uint32_t vdev_id; 8622 enum wmi_obss_color_collision_evt_type evt_type; 8623 uint32_t obss_color_bitmap_bit0to31; 8624 uint32_t obss_color_bitmap_bit32to63; 8625 }; 8626 8627 #ifdef QCA_SUPPORT_CP_STATS 8628 /** 8629 * struct wmi_host_congestion_stats - host definition of congestion stats 8630 * @vdev_id: ID of the vdev to which this info belongs. 8631 * @congestion: This field holds the congestion percentage = 8632 * (busy_time/total_time)*100 8633 * for the interval from when the vdev was started to the current time 8634 * (or the time at which the vdev was stopped). 8635 */ 8636 struct wmi_host_congestion_stats { 8637 uint32_t vdev_id; 8638 uint32_t congestion; 8639 }; 8640 #endif 8641 8642 #ifdef FEATURE_WLAN_APF 8643 /** 8644 * struct wmi_apf_write_memory_params - Android Packet Filter write memory 8645 * params 8646 * @vdev_id: VDEV on which APF memory is to be written 8647 * @apf_version: APF version number 8648 * @program_len: Length reserved for program in the APF work memory 8649 * @addr_offset: Relative address in APF work memory to start writing 8650 * @length: Size of the write 8651 * @buf: Pointer to the buffer 8652 */ 8653 struct wmi_apf_write_memory_params { 8654 uint8_t vdev_id; 8655 uint32_t apf_version; 8656 uint32_t program_len; 8657 uint32_t addr_offset; 8658 uint32_t length; 8659 uint8_t *buf; 8660 }; 8661 8662 /** 8663 * struct wmi_apf_read_memory_params - Android Packet Filter read memory params 8664 * @vdev_id: vdev id 8665 * @addr_offset: Relative address in APF work memory to read from 8666 * @length: Size of the memory fetch 8667 */ 8668 struct wmi_apf_read_memory_params { 8669 uint8_t vdev_id; 8670 uint32_t addr_offset; 8671 uint32_t length; 8672 }; 8673 8674 /** 8675 * struct wmi_apf_read_memory_resp_event_params - Event containing read Android 8676 * Packet Filter memory response 8677 * @vdev_id: vdev id 8678 * @offset: Read memory offset 8679 * @length: Read memory length 8680 * @more_data: Indicates more data to come 8681 * @data: Pointer to the data 8682 */ 8683 struct wmi_apf_read_memory_resp_event_params { 8684 uint32_t vdev_id; 8685 uint32_t offset; 8686 uint32_t length; 8687 bool more_data; 8688 uint8_t *data; 8689 }; 8690 #endif /* FEATURE_WLAN_APF */ 8691 8692 #endif /* _WMI_UNIFIED_PARAM_H_ */ 8693