1 /* 2 * Copyright (c) 2012-2019 The Linux Foundation. All rights reserved. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for 5 * any purpose with or without fee is hereby granted, provided that the 6 * above copyright notice and this permission notice appear in all 7 * copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 10 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED 11 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE 12 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL 13 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 14 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 15 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 16 * PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 /** 20 * DOC: declares vendor commands interfacing with linux kernel 21 */ 22 23 24 #ifndef _WLAN_QCA_VENDOR_H_ 25 #define _WLAN_QCA_VENDOR_H_ 26 27 /* Vendor id to be used in vendor specific command and events 28 * to user space. 29 * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID, 30 * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and 31 * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in 32 * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that 33 */ 34 35 #define QCA_NL80211_VENDOR_ID 0x001374 36 37 /** 38 * enum qca_nl80211_vendor_subcmds: NL 80211 vendor sub command 39 * 40 * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Unspecified 41 * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test 42 * Sub commands 2 to 8 are not used 43 * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Roaming 44 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Avoid frequency. 45 * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: DFS capability 46 * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass 47 * NAN Request/Response and NAN Indication messages. These messages are 48 * interpreted between the framework and the firmware component. While 49 * sending the command from userspace to the driver, payload is not 50 * encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN 51 * is used when receiving vendor events in userspace from the driver. 52 * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT: Ext stats 53 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET: Link layer stats set 54 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET: Link layer stats get 55 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR: Link layer stats clear 56 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS: Link layer stats radio 57 * results 58 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS: Link layer stats interface 59 * results 60 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS: Link layer stats peer 61 * results 62 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START: Ext scan start 63 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP: Ext scan stop 64 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS: Ext scan get valid 65 * channels 66 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES: Ext scan get capability 67 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS: Ext scan get cached 68 * results 69 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE: Ext scan results 70 * available. Used when report_threshold is reached in scan cache. 71 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT: Ext scan full scan 72 * result. Used to report scan results when each probe rsp. is received, 73 * if report_events enabled in wifi_scan_cmd_params. 74 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT: Ext scan event from target. 75 * Indicates progress of scanning state-machine. 76 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND: Ext scan hotlist 77 * ap found 78 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST: Ext scan set hotlist 79 * bssid 80 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST: Ext scan reset 81 * hotlist bssid 82 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE: Ext scan significant 83 * change 84 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE: Ext scan set 85 * significant change 86 * ap found 87 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE: Ext scan reset 88 * significant change 89 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE: Ext tdls enable 90 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE: Ext tdls disable 91 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS: Ext tdls get status 92 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE: Ext tdls state 93 * @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES: Get supported features 94 * @QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI: Set scanning_mac_oui 95 * @QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG: No DFS flag 96 * @QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX: Get Concurrency Matrix 97 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Get the key mgmt offload keys 98 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: After roaming, send the 99 * roaming and auth information. 100 * @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED: Set OCB schedule 101 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS offload flag 102 * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Get the supported features by the 103 * driver. 104 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Indicate that driver 105 * started CAC on DFS channel 106 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Indicate that driver 107 * completed the CAC check on DFS channel 108 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Indicate that the CAC 109 * check was aborted by the driver 110 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Indicate that the 111 * driver completed NOP 112 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Indicate that the 113 * driver detected radar signal on the current operating channel 114 * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: get wlan driver information 115 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START: start wifi logger 116 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP: memory dump request 117 * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logger feature set 118 * @QCA_NL80211_VENDOR_SUBCMD_ROAM: roam 119 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST: extscan set ssid hotlist 120 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST: 121 * extscan reset ssid hotlist 122 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND: hotlist ssid found 123 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST: hotlist ssid lost 124 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST: set pno list 125 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST: set passpoint list 126 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST: 127 * reset passpoint list 128 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND: pno network found 129 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND: 130 * passpoint network found 131 * @QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION: set wifi config 132 * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION: get wifi config 133 * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logging features 134 * @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: get link properties 135 * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG: set gateway parameters 136 * @QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST: get preferred channel 137 list 138 * @QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL: channel hint 139 * @QCA_NL80211_VENDOR_SUBCMD_SETBAND: vendor setband command 140 * @QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN: venodr scan command 141 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE: vendor scan complete 142 * @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: vendor abort scan 143 * @QCA_NL80211_VENDOR_SUBCMD_OTA_TEST: enable OTA test 144 * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE: set tx power by percentage 145 * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB: reduce tx power by DB 146 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG: SAP configuration 147 * @QCA_NL80211_VENDOR_SUBCMD_TSF: TSF operations command 148 * @QCA_NL80211_VENDOR_SUBCMD_WISA: WISA mode configuration 149 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to 150 * start the P2P Listen Offload function in device and pass the listen 151 * channel, period, interval, count, number of device types, device 152 * types and vendor information elements to device driver and firmware. 153 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to 154 * indicate stop request/response of the P2P Listen Offload function in 155 * device. As an event, it indicates either the feature stopped after it 156 * was already running or feature has actually failed to start. 157 * @QCA_NL80211_VENDOR_SUBCMD_GET_STATION: send BSS Information 158 * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After SAP starts 159 * beaconing, this sub command provides the driver, the frequencies on the 160 * 5 GHz to check for any radar activity. Driver selects one channel from 161 * this priority list provided through 162 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts 163 * to check for radar activity on it. If no radar activity is detected 164 * during the channel availability check period, driver internally switches 165 * to the selected frequency of operation. If the frequency is zero, driver 166 * internally selects a channel. The status of this conditional switch is 167 * indicated through an event using the same sub command through 168 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are 169 * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch 170 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Command/event used to config 171 * indication period and threshold for MAC layer counters. 172 * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior 173 * in the host driver. The different TDLS configurations are defined 174 * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration. 175 * @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Get HE related capabilities 176 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS:Set the Specific Absorption Rate 177 * (SAR) power limits. A critical regulation for FCC compliance, OEMs 178 * require methods to set SAR limits on TX power of WLAN/WWAN. 179 * enum qca_vendor_attr_sar_limits attributes are used with this command. 180 * @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: Vendor command used to get/set 181 * configuration of vendor ACS. 182 * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the 183 * requisite information leading to a power save failure. The information 184 * carried as part of this event is represented by the 185 * enum qca_attr_chip_power_save_failure attributes. 186 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics 187 * collection. Uses attributes defined in enum qca_attr_nud_stats_set. 188 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These 189 * statistics are represented by the enum qca_attr_nud_stats_get 190 * attributes. 191 * @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch 192 * the BSS transition status, whether accept or reject, for a list of 193 * candidate BSSIDs provided by the userspace. This uses the vendor 194 * attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and 195 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify 196 * the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an 197 * array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in 198 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response 199 * the driver shall specify array of 200 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and 201 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in 202 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. 203 * @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a 204 * specific QCA module. The trace levels are represented by 205 * enum qca_attr_trace_level attributes. 206 * @QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT: Set the Beam Refinement 207 * Protocol antenna limit in different modes. See enum 208 * qca_wlan_vendor_attr_brp_ant_limit_mode. 209 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan 210 * parameters are specified by enum qca_wlan_vendor_attr_spectral_scan. 211 * This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) 212 * identifying the operation in success case. 213 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses 214 * a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from 215 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START to identify the scan to 216 * be stopped. 217 * @QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS: Set the active Type Of Service on the 218 * specific interface. This can be used to modify some of the low level 219 * scan parameters (off channel dwell time, home channel time) in the 220 * driver/firmware. These parameters are maintained within the host 221 * driver. 222 * This command is valid only when the interface is in the connected 223 * state. 224 * These scan parameters shall be reset by the driver/firmware once 225 * disconnected. The attributes used with this command are defined in 226 * enum qca_wlan_vendor_attr_active_tos. 227 * @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the 228 * driver has detected an internal failure. This event carries the 229 * information indicating the reason that triggered this detection. The 230 * attributes for this command are defined in 231 * enum qca_wlan_vendor_attr_hang. 232 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values 233 * of spectral parameters used. The spectral scan parameters are specified 234 * by enum qca_wlan_vendor_attr_spectral_scan. 235 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats 236 * for spectral scan functionality. The debug stats are specified by 237 * enum qca_wlan_vendor_attr_spectral_diag_stats. 238 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral 239 * scan system capabilities. The capabilities are specified 240 * by enum qca_wlan_vendor_attr_spectral_cap. 241 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current 242 * status of spectral scan. The status values are specified 243 * by enum qca_wlan_vendor_attr_spectral_scan_status. 244 * @QCA_NL80211_VENDOR_SUBCMD_HTT_STATS: Request the firmware 245 * DP stats for a particualr stats type for response evnet 246 * it carries the stats data sent from the FW 247 * @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative 248 * RF Operating Parameter (RROP) information. The attributes for this 249 * information are defined in enum qca_wlan_vendor_attr_rrop_info. This is 250 * intended for use by external Auto Channel Selection applications. 251 * @QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS: Get the Specific Absorption Rate 252 * (SAR) power limits. This is a companion to the command 253 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the 254 * settings currently in use. The attributes returned by this command are 255 * defined by enum qca_vendor_attr_sar_limits. 256 * @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO: Provides the current behaviour of 257 * the WLAN hardware MAC's associated with each WLAN netdev interface. 258 * This works both as a query (user space asks the current mode) or event 259 * interface (driver advertizing the current mode to the user space). 260 * Driver does not trigger this event for temporary hardware mode changes. 261 * Mode changes w.r.t Wi-Fi connection updation ( VIZ creation / deletion, 262 * channel change etc ) are updated with this event. Attributes for this 263 * interface are defined in enum qca_wlan_vendor_attr_mac. 264 * @QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH: Set MSDU queue depth threshold 265 * per peer per TID. Attributes for this command are define in 266 * enum qca_wlan_set_qdepth_thresh_attr 267 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi 268 * test configuration. Attributes for this command are defined in 269 * enum qca_wlan_vendor_attr_wifi_test_config. 270 * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor 271 * command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN, 272 * carried a payload which was a binary blob of data. The command was not 273 * extendable to send more information. The newer version carries the 274 * legacy blob encapsulated within an attribute and can be extended with 275 * additional vendor attributes that can enhance the NAN command 276 * interface. 277 * 278 */ 279 280 enum qca_nl80211_vendor_subcmds { 281 QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, 282 QCA_NL80211_VENDOR_SUBCMD_TEST = 1, 283 QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, 284 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, 285 QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, 286 QCA_NL80211_VENDOR_SUBCMD_NAN = 12, 287 QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13, 288 289 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, 290 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, 291 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, 292 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, 293 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, 294 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, 295 296 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START = 20, 297 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP = 21, 298 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS = 22, 299 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES = 23, 300 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS = 24, 301 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE = 25, 302 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT = 26, 303 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT = 27, 304 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND = 28, 305 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST = 29, 306 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST = 30, 307 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE = 31, 308 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE = 32, 309 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE = 33, 310 311 QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, 312 QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, 313 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, 314 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, 315 316 QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, 317 318 QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, 319 QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, 320 321 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST = 41, 322 323 /* Get Concurrency Matrix */ 324 QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, 325 326 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, 327 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, 328 QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, 329 330 /* Deprecated */ 331 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED = 53, 332 333 QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, 334 335 QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, 336 337 /* Off loaded DFS events */ 338 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56, 339 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57, 340 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58, 341 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59, 342 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60, 343 344 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61, 345 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62, 346 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63, 347 QCA_NL80211_VENDOR_SUBCMD_ROAM = 64, 348 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST = 65, 349 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST = 66, 350 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND = 67, 351 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST = 68, 352 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST = 69, 353 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST = 70, 354 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST = 71, 355 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND = 72, 356 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND = 73, 357 358 /* Wi-Fi Configuration subcommands */ 359 QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74, 360 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75, 361 QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76, 362 QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77, 363 364 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78, 365 QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79, 366 QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80, 367 QCA_NL80211_VENDOR_SUBCMD_NDP = 81, 368 369 /* NS Offload enable/disable cmd */ 370 QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82, 371 372 QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83, 373 QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84, 374 375 QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85, 376 377 QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91, 378 /* OCB commands */ 379 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92, 380 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93, 381 QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94, 382 QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95, 383 QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96, 384 QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97, 385 QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98, 386 QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99, 387 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100, 388 389 /* subcommand to get link properties */ 390 QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101, 391 /* LFR Subnet Detection */ 392 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102, 393 394 /* DBS subcommands */ 395 QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103, 396 QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104, 397 398 /* Vendor setband command */ 399 QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105, 400 401 /* Vendor scan commands */ 402 QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106, 403 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107, 404 405 /* OTA test subcommand */ 406 QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108, 407 /* Tx power scaling subcommands */ 408 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109, 409 /* Tx power scaling in db subcommands */ 410 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB = 115, 411 QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116, 412 QCA_NL80211_VENDOR_SUBCMD_STA_CONNECT_ROAM_POLICY = 117, 413 QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118, 414 QCA_NL80211_VENDOR_SUBCMD_TSF = 119, 415 QCA_NL80211_VENDOR_SUBCMD_WISA = 120, 416 QCA_NL80211_VENDOR_SUBCMD_GET_STATION = 121, 417 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122, 418 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123, 419 QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124, 420 QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125, 421 422 QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126, 423 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127, 424 /* FTM/indoor location subcommands */ 425 QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128, 426 QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129, 427 QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130, 428 QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131, 429 QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132, 430 QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133, 431 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134, 432 QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135, 433 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136, 434 435 /* Encrypt/Decrypt command */ 436 QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137, 437 438 QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138, 439 /* DMG low level RF sector operations */ 440 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139, 441 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140, 442 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141, 443 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142, 444 445 /* Configure the TDLS mode from user space */ 446 QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143, 447 448 QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144, 449 450 /* Vendor abort scan command */ 451 QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145, 452 453 /* Set Specific Absorption Rate(SAR) Power Limits */ 454 QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146, 455 456 /* External Auto channel configuration setting */ 457 QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147, 458 459 QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148, 460 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149, 461 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150, 462 QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151, 463 464 /* Set the trace level for QDF */ 465 QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152, 466 467 QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT = 153, 468 469 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154, 470 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155, 471 QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156, 472 QCA_NL80211_VENDOR_SUBCMD_HANG = 157, 473 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158, 474 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159, 475 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160, 476 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161, 477 QCA_NL80211_VENDOR_SUBCMD_HTT_STATS = 162, 478 QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163, 479 QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164, 480 QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO = 165, 481 QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166, 482 /* Wi-Fi test configuration subcommand */ 483 QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169, 484 QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171, 485 QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174, 486 }; 487 488 enum qca_wlan_vendor_tos { 489 QCA_WLAN_VENDOR_TOS_BK = 0, 490 QCA_WLAN_VENDOR_TOS_BE = 1, 491 QCA_WLAN_VENDOR_TOS_VI = 2, 492 QCA_WLAN_VENDOR_TOS_VO = 3, 493 }; 494 495 /** 496 * enum qca_wlan_vendor_attr_active_tos - Used by the vendor command 497 * QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS. 498 */ 499 enum qca_wlan_vendor_attr_active_tos { 500 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_INVALID = 0, 501 /* Type Of Service - Represented by qca_wlan_vendor_tos */ 502 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS = 1, 503 /* Flag attribute representing the start (attribute included) or stop 504 * (attribute not included) of the respective TOS. 505 */ 506 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2, 507 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_MAX = 3, 508 }; 509 510 enum qca_wlan_vendor_hang_reason { 511 /* Unspecified reason */ 512 QCA_WLAN_HANG_REASON_UNSPECIFIED = 0, 513 /* No Map for the MAC entry for the received frame */ 514 QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1, 515 /* peer deletion timeout happened */ 516 QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2, 517 /* peer unmap timeout */ 518 QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3, 519 /* Scan request timed out */ 520 QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4, 521 /* Consecutive Scan attempt failures */ 522 QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5, 523 /* Unable to get the message buffer */ 524 QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6, 525 /* Current command processing is timedout */ 526 QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7, 527 /* Timeout for an ACK from FW for suspend request */ 528 QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8, 529 /* Timeout for an ACK from FW for resume request */ 530 QCA_WLAN_HANG_RESUME_TIMEOUT = 9, 531 /* Transmission timeout for consecutive data frames */ 532 QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10, 533 /* Timeout for the TX completion status of data frame */ 534 QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11, 535 /* DXE failure for tx/Rx, DXE resource unavailability */ 536 QCA_WLAN_HANG_DXE_FAILURE = 12, 537 /* WMI pending commands exceed the maximum count */ 538 QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13, 539 }; 540 541 /** 542 * enum qca_wlan_vendor_attr_hang - Used by the vendor command 543 * QCA_NL80211_VENDOR_SUBCMD_HANG. 544 */ 545 enum qca_wlan_vendor_attr_hang { 546 QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0, 547 /* 548 * Reason for the Hang - Represented by enum 549 * qca_wlan_vendor_hang_reason. 550 */ 551 QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1, 552 553 QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST, 554 QCA_WLAN_VENDOR_ATTR_HANG_MAX = 555 QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1, 556 }; 557 558 /** 559 * enum qca_vendor_attr_set_trace_level - Config params for QDF set trace level 560 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID: Invalid trace level 561 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM : Trace level parameters 562 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID : Module of which trace 563 level needs to be updated. 564 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK : verbose mask, which need 565 * to be set. 566 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST : after last. 567 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX : Max attribute. 568 */ 569 enum qca_vendor_attr_set_trace_level { 570 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID = 0, 571 /* 572 * Array of QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM 573 * attributes. 574 */ 575 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM = 1, 576 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID = 2, 577 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK = 3, 578 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST, 579 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX = 580 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST - 1, 581 }; 582 583 /** 584 * enum qca_wlan_vendor_attr_get_station - Sub commands used by 585 * QCA_NL80211_VENDOR_SUBCMD_GET_STATION to get the corresponding 586 * station information. The information obtained through these 587 * commands signify the current info in connected state and 588 * latest cached information during the connected state , if queried 589 * when in disconnected state. 590 * 591 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID: Invalid attribute 592 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO: bss info 593 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON: assoc fail reason 594 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE: remote station info 595 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST: After last 596 */ 597 enum qca_wlan_vendor_attr_get_station { 598 QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID = 0, 599 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO, 600 QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON, 601 QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE, 602 603 /* keep last */ 604 QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST, 605 QCA_WLAN_VENDOR_ATTR_GET_STATION_MAX = 606 QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST - 1, 607 }; 608 609 /** 610 * enum qca_wlan_802_11_mode - dot11 mode 611 * @QCA_WLAN_802_11_MODE_11B: mode B 612 * @QCA_WLAN_802_11_MODE_11G: mode G 613 * @QCA_WLAN_802_11_MODE_11N: mode N 614 * @QCA_WLAN_802_11_MODE_11A: mode A 615 * @QCA_WLAN_802_11_MODE_11AC: mode AC 616 * @QCA_WLAN_802_11_MODE_INVALID: Invalid dot11 mode 617 */ 618 enum qca_wlan_802_11_mode { 619 QCA_WLAN_802_11_MODE_11B, 620 QCA_WLAN_802_11_MODE_11G, 621 QCA_WLAN_802_11_MODE_11N, 622 QCA_WLAN_802_11_MODE_11A, 623 QCA_WLAN_802_11_MODE_11AC, 624 QCA_WLAN_802_11_MODE_INVALID, 625 }; 626 627 /** 628 * enum qca_wlan_auth_type - Authentication key management type 629 * @QCA_WLAN_AUTH_TYPE_INVALID: Invalid key management type 630 * @QCA_WLAN_AUTH_TYPE_OPEN: Open key 631 * @QCA_WLAN_AUTH_TYPE_SHARED: shared key 632 * @QCA_WLAN_AUTH_TYPE_WPA: wpa key 633 * @QCA_WLAN_AUTH_TYPE_WPA_PSK: wpa psk key 634 * @QCA_WLAN_AUTH_TYPE_WPA_NONE: wpa none key 635 * @QCA_WLAN_AUTH_TYPE_RSN: rsn key 636 * @QCA_WLAN_AUTH_TYPE_RSN_PSK: rsn psk key 637 * @QCA_WLAN_AUTH_TYPE_FT: ft key 638 * @QCA_WLAN_AUTH_TYPE_FT_PSK: ft psk key 639 * @QCA_WLAN_AUTH_TYPE_SHA256: shared 256 key 640 * @QCA_WLAN_AUTH_TYPE_SHA256_PSK: shared 256 psk 641 * @QCA_WLAN_AUTH_TYPE_WAI: wai key 642 * @QCA_WLAN_AUTH_TYPE_WAI_PSK wai psk key 643 * @QCA_WLAN_AUTH_TYPE_CCKM_WPA: cckm wpa key 644 * @QCA_WLAN_AUTH_TYPE_CCKM_RSN: cckm rsn key 645 */ 646 enum qca_wlan_auth_type { 647 QCA_WLAN_AUTH_TYPE_INVALID, 648 QCA_WLAN_AUTH_TYPE_OPEN, 649 QCA_WLAN_AUTH_TYPE_SHARED, 650 QCA_WLAN_AUTH_TYPE_WPA, 651 QCA_WLAN_AUTH_TYPE_WPA_PSK, 652 QCA_WLAN_AUTH_TYPE_WPA_NONE, 653 QCA_WLAN_AUTH_TYPE_RSN, 654 QCA_WLAN_AUTH_TYPE_RSN_PSK, 655 QCA_WLAN_AUTH_TYPE_FT, 656 QCA_WLAN_AUTH_TYPE_FT_PSK, 657 QCA_WLAN_AUTH_TYPE_SHA256, 658 QCA_WLAN_AUTH_TYPE_SHA256_PSK, 659 QCA_WLAN_AUTH_TYPE_WAI, 660 QCA_WLAN_AUTH_TYPE_WAI_PSK, 661 QCA_WLAN_AUTH_TYPE_CCKM_WPA, 662 QCA_WLAN_AUTH_TYPE_CCKM_RSN, 663 QCA_WLAN_AUTH_TYPE_AUTOSWITCH, 664 }; 665 666 /** 667 * enum qca_wlan_vendor_attr_get_station_info - Station Info queried 668 * through QCA_NL80211_VENDOR_SUBCMD_GET_STATION. 669 * 670 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID: Invalid Attribute 671 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR: 672 * Get the standard NL attributes Nested with this attribute. 673 * Ex : Query BW , BITRATE32 , NSS , Signal , Noise of the Link - 674 * NL80211_ATTR_SSID / NL80211_ATTR_SURVEY_INFO (Connected Channel) / 675 * NL80211_ATTR_STA_INFO 676 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR: 677 * Get the standard NL attributes Nested with this attribute. 678 * Ex : Query HT/VHT Capability advertized by the AP. 679 * NL80211_ATTR_VHT_CAPABILITY / NL80211_ATTR_HT_CAPABILITY 680 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT: 681 * Number of successful Roam attempts before a 682 * disconnect, Unsigned 32 bit value 683 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM: 684 * Authentication Key Management Type used for the connected session. 685 * Signified by enum qca_wlan_auth_type 686 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE: 802.11 Mode of the 687 * connected Session, signified by enum qca_wlan_802_11_mode 688 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION: 689 * HS20 Indication Element 690 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON: 691 * Status Code Corresponding to the Association Failure. 692 * Unsigned 32 bit value. 693 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE: 694 * Max phy rate of remote station 695 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS: 696 * TX packets to remote station 697 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES: 698 * TX bytes to remote station 699 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS: 700 * RX packets from remote station 701 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES: 702 * RX bytes from remote station 703 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE: 704 * Last TX rate with remote station 705 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE: 706 * Last RX rate with remote station 707 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM: 708 * Remote station enable/disable WMM 709 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE: 710 * Remote station connection mode 711 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU: 712 * Remote station AMPDU enable/disable 713 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC: 714 * Remote station TX Space-time block coding enable/disable 715 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC: 716 * Remote station RX Space-time block coding enable/disable 717 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH: 718 * Remote station channel width 719 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE: 720 * Remote station short GI enable/disable 721 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD: Attribute type for padding 722 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST: After last 723 */ 724 enum qca_wlan_vendor_attr_get_station_info { 725 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID = 0, 726 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR, 727 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR, 728 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT, 729 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM, 730 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE, 731 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION, 732 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION, 733 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION, 734 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON, 735 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE, 736 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS, 737 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES, 738 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS, 739 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES, 740 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE, 741 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE, 742 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM, 743 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE, 744 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU, 745 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC, 746 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC, 747 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH, 748 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE, 749 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0)) 750 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD, 751 #endif 752 /* keep last */ 753 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST, 754 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_MAX = 755 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST - 1, 756 }; 757 758 /** 759 * enum qca_nl80211_vendor_subcmds_index - vendor sub commands index 760 * 761 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX: Avoid frequency 762 * @QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX: Nan 763 * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX: Ext stats 764 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX: Ext scan start 765 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX: Ext scan stop 766 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX: Ext scan get 767 * capability 768 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX: Ext scan get 769 * cached results 770 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX: Ext scan 771 * results available 772 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX: Ext scan full 773 * scan result 774 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX: Ext scan event 775 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX: Ext scan hot list 776 * AP found 777 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX: Ext scan set 778 * bssid hotlist 779 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX: Ext scan reset 780 * bssid hotlist 781 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX: Ext scan 782 * significant change 783 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX: Ext scan 784 * set significant change 785 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX: Ext scan 786 * reset significant change 787 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX: Set stats 788 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX: Get stats 789 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX: Clear stats 790 * @QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX: Radio stats 791 * @QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX: Iface stats 792 * @QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX: Peer info stats 793 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT_INDEX: MAC layer counters 794 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX: Ext tdls state change 795 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX: ACS command 796 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX: Pass Roam and Auth info 797 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX: hotlist ap lost 798 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX: 799 * pno network found index 800 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX: 801 * passpoint match found index 802 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX: 803 * set ssid hotlist index 804 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX: 805 * reset ssid hotlist index 806 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX: 807 * hotlist ssid found index 808 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX: 809 * hotlist ssid lost index 810 * @QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX 811 * dcc stats event index 812 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX: vendor scan index 813 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX: 814 * vendor scan complete event index 815 * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX: 816 * update gateway parameters index 817 * @QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX: TSF response events index 818 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX: 819 * P2P listen offload index 820 * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX: SAP 821 * conditional channel switch index 822 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET_INDEX: NUD DEBUG Stats index 823 * @QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX: hang event reason index 824 * @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX: MAC mode info index 825 * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT_INDEX: NAN Extended index 826 */ 827 828 enum qca_nl80211_vendor_subcmds_index { 829 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX = 0, 830 831 QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX, 832 833 #ifdef WLAN_FEATURE_STATS_EXT 834 QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX, 835 #endif /* WLAN_FEATURE_STATS_EXT */ 836 837 #ifdef FEATURE_WLAN_EXTSCAN 838 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX, 839 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX, 840 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX, 841 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX, 842 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX, 843 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX, 844 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX, 845 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX, 846 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX, 847 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX, 848 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX, 849 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX, 850 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX, 851 #endif /* FEATURE_WLAN_EXTSCAN */ 852 853 #ifdef WLAN_FEATURE_LINK_LAYER_STATS 854 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX, 855 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX, 856 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX, 857 QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX, 858 QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX, 859 QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX, 860 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT_INDEX, 861 #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ 862 863 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX, 864 QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX, 865 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 866 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX, 867 #endif 868 /* DFS */ 869 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED_INDEX, 870 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED_INDEX, 871 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED_INDEX, 872 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED_INDEX, 873 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED_INDEX, 874 #ifdef FEATURE_WLAN_EXTSCAN 875 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX, 876 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX, 877 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX, 878 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX, 879 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX, 880 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX, 881 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX, 882 #endif /* FEATURE_WLAN_EXTSCAN */ 883 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION_INDEX, 884 QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI_INDEX, 885 #ifdef WLAN_FEATURE_MEMDUMP 886 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP_INDEX, 887 #endif /* WLAN_FEATURE_MEMDUMP */ 888 /* OCB events */ 889 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX, 890 QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX, 891 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX, 892 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX, 893 #ifdef WLAN_FEATURE_TSF 894 QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX, 895 #endif 896 QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX, 897 QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX, 898 QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX, 899 QCA_NL80211_VENDOR_SUBCMD_UPDATE_EXTERNAL_ACS_CONFIG, 900 QCA_NL80211_VENDOR_SUBCMD_PWR_SAVE_FAIL_DETECTED_INDEX, 901 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET_INDEX, 902 QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX, 903 QCA_NL80211_VENDOR_SUBCMD_HTT_STATS_INDEX, 904 QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX, 905 QCA_NL80211_VENDOR_SUBCMD_NAN_EXT_INDEX, 906 QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT_INDEX, 907 }; 908 909 /** 910 * enum qca_wlan_vendor_attr_tdls_enable - TDLS enable attribute 911 * 912 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID: Invalid initial value 913 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR: An array of 6 x Unsigned 8-bit 914 * value 915 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL: Signed 32-bit value, but lets 916 * keep as unsigned for now 917 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS: operating class 918 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS: Enable max latency in ms 919 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS: Enable min bandwidth 920 * in KBPS 921 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST: After last 922 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX: Max value 923 */ 924 enum qca_wlan_vendor_attr_tdls_enable { 925 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID = 0, 926 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR, 927 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL, 928 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS, 929 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS, 930 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS, 931 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST, 932 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX = 933 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST - 1, 934 }; 935 936 /** 937 * enum qca_wlan_vendor_attr_tdls_disable: tdls disable attribute 938 * 939 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID: Invalid initial value 940 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR: An array of 6 x Unsigned 941 * 8-bit value 942 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST: After last 943 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX: Max value 944 */ 945 enum qca_wlan_vendor_attr_tdls_disable { 946 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID = 0, 947 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR, 948 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST, 949 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX = 950 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST - 1, 951 }; 952 953 /** 954 * qca_chip_power_save_failure_reason: Power save failure reason 955 * @QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL: Indicates power save failure 956 * due to protocol/module. 957 * @QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE: power save failure 958 * due to hardware 959 */ 960 enum qca_chip_power_save_failure_reason { 961 QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, 962 QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, 963 }; 964 965 /** 966 * qca_attr_chip_power_save_failure: attributes to vendor subcmd 967 * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carry the requisite 968 * information leading to the power save failure. 969 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID : invalid 970 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON : power save failure reason 971 * represented by enum qca_chip_power_save_failure_reason 972 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST : Last 973 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX : Max value 974 */ 975 enum qca_attr_chip_power_save_failure { 976 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, 977 978 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, 979 980 /* keep last */ 981 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, 982 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = 983 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, 984 }; 985 986 987 /** 988 * enum qca_wlan_vendor_attr_tdls_get_status - tdls get status attribute 989 * 990 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID: Invalid initial value 991 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR: An array of 6 x Unsigned 992 * 8-bit value 993 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE: get status state, 994 * unsigned 32-bit value 995 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON: get status reason 996 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL: get status channel, 997 * unsigned 32-bit value 998 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS: get operating 999 * class, unsigned 32-bit value 1000 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST: After last 1001 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX: Max value 1002 */ 1003 enum qca_wlan_vendor_attr_tdls_get_status { 1004 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID = 0, 1005 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR, 1006 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE, 1007 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON, 1008 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL, 1009 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS, 1010 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST, 1011 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX = 1012 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST - 1, 1013 }; 1014 1015 /** 1016 * enum qca_wlan_vendor_attr_tdls_state - tdls state attribute 1017 * 1018 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID: Initial invalid value 1019 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR: An array of 6 x Unsigned 1020 * 8-bit value 1021 * @QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE: TDLS new state, 1022 * unsigned 32-bit value 1023 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON: TDLS state reason 1024 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL: TDLS state channel, 1025 * unsigned 32-bit value 1026 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS: TDLS state 1027 * operating class, unsigned 32-bit value 1028 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST: After last 1029 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX: Max value 1030 */ 1031 enum qca_wlan_vendor_attr_tdls_state { 1032 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID = 0, 1033 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR, 1034 QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE, 1035 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON, 1036 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL, 1037 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS, 1038 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST, 1039 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX = 1040 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST - 1, 1041 }; 1042 1043 /* enum's to provide TDLS capabilities */ 1044 enum qca_wlan_vendor_attr_get_tdls_capabilities { 1045 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0, 1046 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS = 1, 1047 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED = 2, 1048 1049 /* keep last */ 1050 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST, 1051 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX = 1052 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1, 1053 }; 1054 1055 enum qca_wlan_vendor_attr { 1056 QCA_WLAN_VENDOR_ATTR_INVALID = 0, 1057 /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ 1058 QCA_WLAN_VENDOR_ATTR_DFS = 1, 1059 /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */ 1060 QCA_WLAN_VENDOR_ATTR_NAN = 2, 1061 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 1062 QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, 1063 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 1064 QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, 1065 /* 1066 * used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined 1067 * by enum qca_roaming_policy. 1068 */ 1069 QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, 1070 QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, 1071 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 1072 QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, 1073 QCA_WLAN_VENDOR_ATTR_TEST = 8, 1074 /* 1075 * used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES 1076 * Unsigned 32-bit value. 1077 */ 1078 QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9, 1079 /* Unsigned 32-bit value */ 1080 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10, 1081 /* Unsigned 32-bit value */ 1082 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11, 1083 /* Unsigned 32-bit value from enum qca_set_band. */ 1084 QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12, 1085 /* Dummy (NOP) attribute for 64 bit padding */ 1086 QCA_WLAN_VENDOR_ATTR_PAD = 13, 1087 /* 1088 * Unique FTM session cookie (Unsigned 64 bit). Specified in 1089 * QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in 1090 * the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and 1091 * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE. 1092 */ 1093 QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14, 1094 /* 1095 * Indoor location capabilities, returned by 1096 * QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA. 1097 * see enum qca_wlan_vendor_attr_loc_capa. 1098 */ 1099 QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15, 1100 /* 1101 * Array of nested attributes containing information about each peer 1102 * in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info 1103 * for supported attributes for each peer. 1104 */ 1105 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16, 1106 /* 1107 * Array of nested attributes containing measurement results for 1108 * one or more peers, reported by the 1109 * QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event. 1110 * See enum qca_wlan_vendor_attr_peer_result for list of supported 1111 * attributes. 1112 */ 1113 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17, 1114 /* Flag attribute for enabling or disabling responder functionality. */ 1115 QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18, 1116 /* 1117 * Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 1118 * command to specify the LCI report that will be sent by 1119 * the responder during a measurement exchange. The format is 1120 * defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10. 1121 */ 1122 QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19, 1123 /* 1124 * Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 1125 * command to specify the location civic report that will 1126 * be sent by the responder during a measurement exchange. 1127 * The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13. 1128 */ 1129 QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20, 1130 /* 1131 * Session/measurement completion status code, 1132 * reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and 1133 * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT 1134 * see enum qca_vendor_attr_loc_session_status. 1135 */ 1136 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21, 1137 /* 1138 * Initial dialog token used by responder (0 if not specified), 1139 * unsigned 8 bit value. 1140 */ 1141 QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22, 1142 /* 1143 * AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS 1144 * and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if 1145 * AOA measurements are needed as part of an FTM session. 1146 * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See 1147 * enum qca_wlan_vendor_attr_aoa_type. 1148 */ 1149 QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23, 1150 /* 1151 * A bit mask (unsigned 32 bit value) of antenna arrays used 1152 * by indoor location measurements. Refers to the antenna 1153 * arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS. 1154 */ 1155 QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24, 1156 /* 1157 * AOA measurement data. Its contents depends on the AOA measurement 1158 * type and antenna array mask: 1159 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values, 1160 * phase of the strongest CIR path for each antenna in the measured 1161 * array(s). 1162 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16 1163 * values, phase and amplitude of the strongest CIR path for each 1164 * antenna in the measured array(s). 1165 */ 1166 QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, 1167 /* 1168 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1169 * to specify the chain number (unsigned 32 bit value) to inquire 1170 * the corresponding antenna RSSI value */ 1171 QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26, 1172 /* 1173 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1174 * to report the specific antenna RSSI value (unsigned 32 bit value) */ 1175 QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27, 1176 /* Frequency in MHz, various uses. Unsigned 32 bit value */ 1177 QCA_WLAN_VENDOR_ATTR_FREQ = 28, 1178 /* 1179 * TSF timer value, unsigned 64 bit value. 1180 * May be returned by various commands. 1181 */ 1182 QCA_WLAN_VENDOR_ATTR_TSF = 29, 1183 /* 1184 * DMG RF sector index, unsigned 16 bit number. Valid values are 1185 * 0..127 for sector indices or 65535 as special value used to 1186 * unlock sector selection in 1187 * QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR. 1188 */ 1189 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30, 1190 /* 1191 * DMG RF sector type, unsigned 8 bit value. One of the values 1192 * in enum qca_wlan_vendor_attr_dmg_rf_sector_type. 1193 */ 1194 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31, 1195 /* 1196 * Bitmask of DMG RF modules for which information is requested. Each 1197 * bit corresponds to an RF module with the same index as the bit 1198 * number. Unsigned 32 bit number but only low 8 bits can be set since 1199 * all DMG chips currently have up to 8 RF modules. 1200 */ 1201 QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32, 1202 /* 1203 * Array of nested attributes where each entry is DMG RF sector 1204 * configuration for a single RF module. 1205 * Attributes for each entry are taken from enum 1206 * qca_wlan_vendor_attr_dmg_rf_sector_cfg. 1207 * Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG 1208 * and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG. 1209 */ 1210 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33, 1211 /* 1212 * Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command 1213 * to report frame aggregation statistics to userspace. 1214 */ 1215 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34, 1216 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35, 1217 /* 1218 * Unsigned 8-bit value representing MBO transition reason code as 1219 * provided by the AP used by subcommand 1220 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is 1221 * specified by the userspace in the request to the driver. 1222 */ 1223 QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36, 1224 /* 1225 * Array of nested attributes, BSSID and status code, used by subcommand 1226 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each 1227 * entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info. 1228 * The userspace space specifies the list/array of candidate BSSIDs in 1229 * the order of preference in the request. The driver specifies the 1230 * status code, for each BSSID in the list, in the response. The 1231 * acceptable candidates are listed in the order preferred by the 1232 * driver. 1233 */ 1234 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37, 1235 /* 1236 * Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command 1237 * See enum qca_wlan_vendor_attr_brp_ant_limit_mode. 1238 */ 1239 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE = 38, 1240 /* 1241 * Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command 1242 * to define the number of antennas to use for BRP. 1243 * different purpose in each ANT_LIMIT_MODE: 1244 * DISABLE - ignored 1245 * EFFECTIVE - upper limit to number of antennas to be used 1246 * FORCE - exact number of antennas to be used 1247 * unsigned 8 bit value 1248 */ 1249 QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39, 1250 /* 1251 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1252 * to report the corresponding antenna index to the chain RSSI value 1253 */ 1254 QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40, 1255 1256 /* keep last */ 1257 QCA_WLAN_VENDOR_ATTR_AFTER_LAST, 1258 QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1 1259 }; 1260 1261 #ifdef FEATURE_WLAN_EXTSCAN 1262 enum qca_wlan_vendor_attr_extscan_config_params { 1263 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0, 1264 1265 /* Unsigned 32-bit value */ 1266 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1, 1267 1268 /* 1269 * Attributes for data used by 1270 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS sub command. 1271 */ 1272 1273 /* Unsigned 32-bit value */ 1274 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND 1275 = 2, 1276 /* Unsigned 32-bit value */ 1277 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS 1278 = 3, 1279 1280 /* 1281 * Attributes for input params used by 1282 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START sub command. 1283 */ 1284 1285 /* Unsigned 32-bit value; channel frequency */ 1286 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CHANNEL = 4, 1287 /* Unsigned 32-bit value; dwell time in ms. */ 1288 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_DWELL_TIME = 5, 1289 /* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */ 1290 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_PASSIVE = 6, 1291 /* Unsigned 8-bit value; channel class */ 1292 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CLASS = 7, 1293 1294 /* Unsigned 8-bit value; bucket index, 0 based */ 1295 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_INDEX = 8, 1296 /* Unsigned 8-bit value; band. */ 1297 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BAND = 9, 1298 /* Unsigned 32-bit value; desired period, in ms. */ 1299 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_PERIOD = 10, 1300 /* Unsigned 8-bit value; report events semantics. */ 1301 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_REPORT_EVENTS = 11, 1302 /* 1303 * Unsigned 32-bit value. Followed by a nested array of 1304 * EXTSCAN_CHANNEL_SPEC_* attributes. 1305 */ 1306 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12, 1307 1308 /* 1309 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_* attributes. 1310 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 1311 */ 1312 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC = 13, 1313 1314 /* Unsigned 32-bit value; base timer period in ms. */ 1315 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14, 1316 /* 1317 * Unsigned 32-bit value; number of APs to store in each scan in the 1318 * BSSID/RSSI history buffer (keep the highest RSSI APs). 1319 */ 1320 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15, 1321 /* 1322 * Unsigned 8-bit value; in %, when scan buffer is this much full, wake 1323 * up AP. 1324 */ 1325 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT 1326 = 16, 1327 1328 /* 1329 * Unsigned 8-bit value; number of scan bucket specs; followed by a 1330 * nested array of_EXTSCAN_BUCKET_SPEC_* attributes and values. The size 1331 * of the array is determined by NUM_BUCKETS. 1332 */ 1333 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17, 1334 1335 /* 1336 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_* attributes. 1337 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS 1338 */ 1339 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC = 18, 1340 1341 /* Unsigned 8-bit value */ 1342 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH 1343 = 19, 1344 /* Unsigned 32-bit value; maximum number of results to be returned. */ 1345 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX 1346 = 20, 1347 1348 /* An array of 6 x unsigned 8-bit value */ 1349 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_BSSID = 21, 1350 /* Signed 32-bit value */ 1351 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22, 1352 /* Signed 32-bit value */ 1353 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23, 1354 /* Unsigned 32-bit value */ 1355 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24, 1356 1357 /* 1358 * Number of hotlist APs as unsigned 32-bit value, followed by a nested 1359 * array of AP_THRESHOLD_PARAM attributes and values. The size of the 1360 * array is determined by NUM_AP. 1361 */ 1362 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25, 1363 1364 /* 1365 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_* attributes. 1366 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 1367 */ 1368 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM = 26, 1369 1370 /* Unsigned 32-bit value; number of samples for averaging RSSI. */ 1371 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE 1372 = 27, 1373 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 1374 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE 1375 = 28, 1376 /* Unsigned 32-bit value; number of APs breaching threshold. */ 1377 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29, 1378 /* 1379 * Unsigned 32-bit value; number of APs. Followed by an array of 1380 * AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP. 1381 */ 1382 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30, 1383 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 1384 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE 1385 = 31, 1386 /* 1387 * Unsigned 32-bit value. If max_period is non zero or different than 1388 * period, then this bucket is an exponential backoff bucket. 1389 */ 1390 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_MAX_PERIOD = 32, 1391 /* Unsigned 32-bit value. */ 1392 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BASE = 33, 1393 /* 1394 * Unsigned 32-bit value. For exponential back off bucket, number of 1395 * scans to perform for a given period. 1396 */ 1397 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_STEP_COUNT = 34, 1398 /* 1399 * Unsigned 8-bit value; in number of scans, wake up AP after these 1400 * many scans. 1401 */ 1402 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS 1403 = 35, 1404 1405 /* 1406 * Attributes for data used by 1407 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST sub command. 1408 */ 1409 1410 /* Unsigned 3-2bit value; number of samples to confirm SSID loss. */ 1411 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE 1412 = 36, 1413 /* 1414 * Number of hotlist SSIDs as unsigned 32-bit value, followed by a 1415 * nested array of SSID_THRESHOLD_PARAM_* attributes and values. The 1416 * size of the array is determined by NUM_SSID. 1417 */ 1418 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37, 1419 /* 1420 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_* 1421 * attributes. 1422 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID 1423 */ 1424 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM = 38, 1425 1426 /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ 1427 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_SSID = 39, 1428 /* Unsigned 8-bit value */ 1429 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_BAND = 40, 1430 /* Signed 32-bit value */ 1431 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41, 1432 /* Signed 32-bit value */ 1433 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42, 1434 /* Unsigned 32-bit value; a bitmask with additional extscan config flag. 1435 */ 1436 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CONFIGURATION_FLAGS = 43, 1437 1438 /* keep last */ 1439 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST, 1440 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_MAX = 1441 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1, 1442 }; 1443 1444 enum qca_wlan_vendor_attr_extscan_results { 1445 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_INVALID = 0, 1446 1447 /* 1448 * Unsigned 32-bit value; must match the request Id supplied by 1449 * Wi-Fi HAL in the corresponding subcmd NL msg. 1450 */ 1451 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_REQUEST_ID = 1, 1452 1453 /* 1454 * Unsigned 32-bit value; used to indicate the status response from 1455 * firmware/driver for the vendor sub-command. 1456 */ 1457 QCA_WLAN_VENDOR_ATTR_EXTSCAN_STATUS = 2, 1458 1459 /* 1460 * EXTSCAN Valid Channels attributes */ 1461 /* Unsigned 32bit value; followed by a nested array of CHANNELS. */ 1462 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_CHANNELS = 3, 1463 /* 1464 * An array of NUM_CHANNELS x unsigned 32-bit value integers 1465 * representing channel numbers. 1466 */ 1467 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CHANNELS = 4, 1468 1469 /* EXTSCAN Capabilities attributes */ 1470 1471 /* Unsigned 32-bit value */ 1472 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5, 1473 /* Unsigned 32-bit value */ 1474 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6, 1475 /* Unsigned 32-bit value */ 1476 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN 1477 = 7, 1478 /* Unsigned 32-bit value */ 1479 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE 1480 = 8, 1481 /* Signed 32-bit value */ 1482 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD 1483 = 9, 1484 /* Unsigned 32-bit value */ 1485 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10, 1486 /* Unsigned 32-bit value */ 1487 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS 1488 = 11, 1489 /* Unsigned 32-bit value */ 1490 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES 1491 = 12, 1492 1493 /* 1494 * EXTSCAN Attributes used with 1495 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE sub-command. 1496 */ 1497 1498 /* Unsigned 32-bit value */ 1499 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13, 1500 1501 /* 1502 * EXTSCAN attributes used with 1503 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT sub-command. 1504 */ 1505 1506 /* 1507 * An array of NUM_RESULTS_AVAILABLE x 1508 * QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_* 1509 */ 1510 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST = 14, 1511 1512 /* Unsigned 64-bit value; age of sample at the time of retrieval */ 1513 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15, 1514 /* 33 x unsigned 8-bit value; NULL terminated SSID */ 1515 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_SSID = 16, 1516 /* An array of 6 x unsigned 8-bit value */ 1517 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BSSID = 17, 1518 /* Unsigned 32-bit value; channel frequency in MHz */ 1519 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18, 1520 /* Signed 32-bit value */ 1521 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RSSI = 19, 1522 /* Unsigned 32-bit value */ 1523 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT = 20, 1524 /* Unsigned 32-bit value */ 1525 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21, 1526 /* Unsigned 16-bit value */ 1527 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22, 1528 /* Unsigned 16-bit value */ 1529 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23, 1530 /* Unsigned 32-bit value; size of the IE DATA blob */ 1531 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24, 1532 /* 1533 * An array of IE_LENGTH x unsigned 8-bit value; blob of all the 1534 * information elements found in the beacon; this data should be a 1535 * packed list of wifi_information_element objects, one after the 1536 * other. 1537 */ 1538 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25, 1539 1540 /* 1541 * Unsigned 8-bit value; set by driver to indicate more scan results are 1542 * available. 1543 */ 1544 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26, 1545 1546 /* 1547 * EXTSCAN attributes for 1548 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT sub-command. 1549 */ 1550 /* Unsigned 8-bit value */ 1551 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_TYPE = 27, 1552 /* Unsigned 32-bit value */ 1553 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_STATUS = 28, 1554 1555 /* 1556 * EXTSCAN attributes for 1557 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND sub-command. 1558 */ 1559 /* 1560 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1561 * to indicate number of results. 1562 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the 1563 * list of results. 1564 */ 1565 1566 /* 1567 * EXTSCAN attributes for 1568 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE sub-command. 1569 */ 1570 /* An array of 6 x unsigned 8-bit value */ 1571 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29, 1572 /* Unsigned 32-bit value */ 1573 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL 1574 = 30, 1575 /* Unsigned 32-bit value. */ 1576 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI 1577 = 31, 1578 /* 1579 * A nested array of signed 32-bit RSSI values. Size of the array is 1580 * determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI. 1581 */ 1582 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST 1583 = 32, 1584 1585 /* 1586 * EXTSCAN attributes used with 1587 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS sub-command. 1588 */ 1589 /* 1590 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1591 * to indicate number of extscan cached results returned. 1592 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST to indicate 1593 * the list of extscan cached results. 1594 */ 1595 1596 /* 1597 * An array of NUM_RESULTS_AVAILABLE x 1598 * QCA_NL80211_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_* 1599 */ 1600 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST = 33, 1601 /* Unsigned 32-bit value; a unique identifier for the scan unit. */ 1602 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_SCAN_ID = 34, 1603 /* 1604 * Unsigned 32-bit value; a bitmask w/additional information about scan. 1605 */ 1606 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_FLAGS = 35, 1607 /* 1608 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1609 * to indicate number of wifi scan results/bssids retrieved by the scan. 1610 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the 1611 * list of wifi scan results returned for each cached result block. 1612 */ 1613 1614 /* 1615 * EXTSCAN attributes for 1616 * QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command. 1617 */ 1618 /* 1619 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE for 1620 * number of results. 1621 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested 1622 * list of wifi scan results returned for each 1623 * wifi_passpoint_match_result block. 1624 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE. 1625 */ 1626 1627 /* 1628 * EXTSCAN attributes for 1629 * QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command. 1630 */ 1631 /* Unsigned 32-bit value */ 1632 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES 1633 = 36, 1634 /* 1635 * A nested array of 1636 * QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_* 1637 * attributes. Array size = 1638 * *_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES. 1639 */ 1640 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37, 1641 1642 /* Unsigned 32-bit value; network block id for the matched network */ 1643 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38, 1644 /* 1645 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested 1646 * list of wifi scan results returned for each 1647 * wifi_passpoint_match_result block. 1648 */ 1649 /* Unsigned 32-bit value */ 1650 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39, 1651 /* 1652 * An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values; 1653 * ANQP data in the information_element format. 1654 */ 1655 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40, 1656 1657 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1658 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41, 1659 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1660 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42, 1661 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1662 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID 1663 = 43, 1664 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1665 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID 1666 = 44, 1667 1668 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_BUCKETS_SCANNED = 45, 1669 QCA_WLAN_VENDOR_ATTR_EXTSCAN_MAX_NUM_BLACKLISTED_BSSID = 46, 1670 1671 /* keep last */ 1672 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST, 1673 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_MAX = 1674 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST - 1, 1675 }; 1676 #endif 1677 1678 #ifdef WLAN_FEATURE_LINK_LAYER_STATS 1679 1680 /** 1681 * enum qca_wlan_vendor_attr_ll_stats_set - vendor attribute set stats 1682 * 1683 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID: Invalid initial value 1684 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD: Size threshold 1685 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING: 1686 * Aggresive stats gathering 1687 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST: After last 1688 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX: Max value 1689 */ 1690 enum qca_wlan_vendor_attr_ll_stats_set { 1691 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0, 1692 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1, 1693 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING, 1694 /* keep last */ 1695 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST, 1696 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX = 1697 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1 1698 }; 1699 1700 /** 1701 * enum qca_wlan_vendor_attr_ll_stats_get - vendor attribute get stats 1702 * 1703 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID: Invalid initial value 1704 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID: Unsigned 32bit value 1705 * provided by the caller issuing the GET stats command. When reporting 1706 * the stats results, the driver uses the same value to indicate which 1707 * GET request the results correspond to. 1708 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK: Get config request mask 1709 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask 1710 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response 1711 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST: After last 1712 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX: Max value 1713 */ 1714 enum qca_wlan_vendor_attr_ll_stats_get { 1715 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0, 1716 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID, 1717 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK, 1718 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST, 1719 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX = 1720 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1 1721 }; 1722 1723 /** 1724 * enum qca_wlan_vendor_attr_ll_stats_clr - vendor attribute clear stats 1725 * 1726 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID: Invalid initial value 1727 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK: Config request mask 1728 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ: Config stop mask 1729 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask 1730 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response 1731 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST: After last 1732 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX: Max value 1733 */ 1734 enum qca_wlan_vendor_attr_ll_stats_clr { 1735 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0, 1736 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK, 1737 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ, 1738 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK, 1739 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP, 1740 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST, 1741 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX = 1742 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1 1743 }; 1744 1745 /** 1746 * enum qca_wlan_vendor_attr_ll_stats_results_type - ll stats result type 1747 * 1748 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID: Initial invalid value 1749 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO: Link layer stats type radio 1750 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE: Link layer stats type interface 1751 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER: Link layer stats type peer 1752 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST: Last value 1753 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX: Max value 1754 */ 1755 enum qca_wlan_vendor_attr_ll_stats_results_type { 1756 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID = 0, 1757 1758 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO = 1, 1759 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE, 1760 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER, 1761 1762 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST, 1763 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX = 1764 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST - 1 1765 }; 1766 1767 /** 1768 * enum qca_wlan_vendor_attr_ll_stats_results - vendor attribute stats results 1769 * 1770 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are nested 1771 * within the interface stats. 1772 * 1773 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could be nested 1774 * within the interface stats. 1775 * 1776 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are nested 1777 * within the interface stats. 1778 * 1779 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* could be nested 1780 * within the peer info stats. 1781 * 1782 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could be 1783 * nested within the channel stats. 1784 * 1785 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ could be nested 1786 * within the radio stats. 1787 * 1788 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID: Invalid initial value 1789 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID: Unsigned 32bit value 1790 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX: Unsigned 32bit value 1791 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX: Unsigned 32bit value 1792 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX: Unsigned 32bit value 1793 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX: Unsigned 32bit value 1794 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT: Unsigned 32bit value 1795 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA: Unsigned 32bit value 1796 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK: Unsigned 32bit value 1797 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE: Interface mode, e.g., STA, 1798 * SOFTAP, IBSS, etc. Type = enum wifi_interface_mode 1799 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR: Interface MAC address. 1800 * An array of 6 Unsigned int8_t 1801 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE: 1802 * Type = enum wifi_connection_state, e.g., DISCONNECTED, AUTHENTICATING, 1803 * etc. Valid for STA, CLI only 1804 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING: 1805 * Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE 1806 * (is that valid for STA only?) 1807 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES: Unsigned 32bit value. 1808 * WIFI_CAPABILITY_XXX 1809 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID: NULL terminated SSID. An 1810 * array of 33 Unsigned 8bit values 1811 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID: BSSID. An array of 6 1812 * Unsigned 8bit values 1813 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR: Country string 1814 * advertised by AP. An array of 3 Unsigned 8bit values 1815 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR: Country string for 1816 * this association. An array of 3 Unsigned 8bit values 1817 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC: Type = enum wifi_traffic_ac e.g. 1818 * V0, VI, BE and BK 1819 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU: Unsigned int 32 value 1820 * corresponding to respective AC 1821 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU: Unsigned int 32 value 1822 * corresponding to respective AC 1823 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST: Unsigned int 32 value 1824 * corresponding to respective AC 1825 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST: Unsigned int 32 value 1826 * corresponding to respective AC 1827 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU: Unsigned int 32 value 1828 * corresponding to respective AC 1829 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU: Unsigned int 32 value 1830 * corresponding to respective AC 1831 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST: Unsigned int 32 value 1832 * corresponding to respective AC 1833 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES: Unsigned int 32 value 1834 * corresponding to respective AC 1835 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT: Unsigned int 32 value 1836 * corresponding to respective AC 1837 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN: Unsigned int 32 1838 * value corresponding to respective AC 1839 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX: Unsigned int 32 1840 * value corresponding to respective AC 1841 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG: Unsigned int 32 1842 * value corresponding to respective AC 1843 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES: Unsigned int 32 1844 * value corresponding to respective AC 1845 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS: Unsigned int 32 1846 * value corresponding to respective AC 1847 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE: Type = enum wifi_peer_type 1848 * Peer type, e.g., STA, AP, P2P GO etc 1849 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS: MAC addr corresponding 1850 * to respective peer. An array of 6 Unsigned 8bit values 1851 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES: Unsigned int 32bit 1852 * value representing capabilities corresponding to respective peer. 1853 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES: Unsigned 32bit value. 1854 * Number of rates 1855 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE: Unsigned int 8bit value: 1856 * 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved 1857 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS: Unsigned int 8bit value: 1858 * 0:1x1, 1:2x2, 3:3x3, 4:4x4 1859 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW: Unsigned int 8bit value: 1860 * 0:20MHz, 1:40Mhz, 2:80Mhz, 3:160Mhz 1861 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX: Unsigned int 8bit value: 1862 * OFDM/CCK rate code would be as per IEEE Std in the units of 0.5mbps 1863 * HT/VHT it would be mcs index 1864 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE: Unsigned 32bit value. 1865 * Bit rate in units of 100Kbps 1866 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU: Unsigned int 32bit value. 1867 * Number of successfully transmitted data pkts i.e., with ACK received 1868 * corresponding to the respective rate 1869 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU: Unsigned int 32bit value. 1870 * Number of received data pkts corresponding to the respective rate 1871 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST: Unsigned int 32bit value. 1872 * Number of data pkts losses, i.e., no ACK received corresponding to 1873 * the respective rate 1874 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES: Unsigned int 32bit value. 1875 * Total number of data pkt retries for the respective rate 1876 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT: Unsigned int 32bit value. 1877 * Total number of short data pkt retries for the respective rate 1878 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG: Unsigned int 32bit value. 1879 * Total number of long data pkt retries for the respective rate 1880 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID: Radio id 1881 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME: Unsigned 32bit value. 1882 * Total number of msecs the radio is awake accruing over time 1883 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME: Unsigned 32bit value. 1884 * Total number of msecs the radio is transmitting accruing over time 1885 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME: Unsigned 32bit value. 1886 * Total number of msecs the radio is in active receive accruing over time 1887 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN: Unsigned 32bit value. 1888 * Total number of msecs the radio is awake due to all scan accruing 1889 * over time 1890 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD: Unsigned 32bit value. 1891 * Total number of msecs the radio is awake due to NAN accruing over time. 1892 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN: Unsigned 32bit value. 1893 * Total number of msecs the radio is awake due to GSCAN accruing over time 1894 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN: Unsigned 32bit value. 1895 * Total number of msecs the radio is awake due to roam scan accruing over 1896 * time. 1897 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN: Unsigned 32bit value. 1898 * Total number of msecs the radio is awake due to PNO scan accruing over 1899 * time. 1900 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20: Unsigned 32bit value. 1901 * Total number of msecs the radio is awake due to HS2.0 scans and GAS 1902 * exchange accruing over time. 1903 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS: Unsigned 32bit value. 1904 * Number of channels 1905 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH: 1906 * Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80, etc. 1907 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ: 1908 * Unsigned 32bit value. Primary 20MHz channel. 1909 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0: 1910 * Unsigned 32bit value. Center frequency (MHz) first segment. 1911 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1: 1912 * Unsigned 32bit value. Center frequency (MHz) second segment. 1913 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME: Unsigned int 32bit value 1914 * representing total number of msecs the radio is awake on that channel 1915 * accruing over time, corresponding to the respective channel. 1916 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME: Unsigned int 32bit 1917 * value representing total number of msecs the CCA register is busy 1918 * accruing over time corresponding to the respective channel. 1919 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS: Number of radios 1920 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO: Channel info 1921 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO: Peer info 1922 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO: Peer rate info 1923 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO: WMM info 1924 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA: Unsigned 8bit value. 1925 * Used by the driver; if set to 1, it indicates that more stats, e.g., 1926 * peers or radio, are to follow in the next 1927 * QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event. Otherwise, it 1928 * is set to 0. 1929 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET: tsf offset 1930 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED: leaky ap detected 1931 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED: 1932 * average number of frames leaked 1933 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME: guard time 1934 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE: Link Layer stats type 1935 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS: LL Radio Number of 1936 * Tx Levels 1937 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL:Number of msecs the 1938 * radio spent in transmitting for each power level 1939 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT: RTS successful count 1940 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT: RTS fail count 1941 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT: PPDU successful count 1942 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT: PPDU fail count 1943 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST: After last 1944 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value 1945 */ 1946 1947 enum qca_wlan_vendor_attr_ll_stats_results { 1948 QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0, 1949 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1, 1950 1951 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2, 1952 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3, 1953 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4, 1954 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5, 1955 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6, 1956 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7, 1957 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8, 1958 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9, 1959 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10, 1960 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11, 1961 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12, 1962 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13, 1963 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14, 1964 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15, 1965 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16, 1966 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17, 1967 1968 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18, 1969 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19, 1970 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20, 1971 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21, 1972 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22, 1973 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23, 1974 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24, 1975 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25, 1976 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26, 1977 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27, 1978 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28, 1979 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29, 1980 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30, 1981 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31, 1982 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32, 1983 1984 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33, 1985 1986 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34, 1987 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35, 1988 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36, 1989 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37, 1990 1991 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38, 1992 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39, 1993 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40, 1994 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41, 1995 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42, 1996 1997 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43, 1998 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44, 1999 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45, 2000 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46, 2001 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47, 2002 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48, 2003 2004 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49, 2005 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50, 2006 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51, 2007 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52, 2008 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53, 2009 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54, 2010 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55, 2011 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56, 2012 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57, 2013 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58, 2014 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59, 2015 2016 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60, 2017 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61, 2018 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62, 2019 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63, 2020 2021 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64, 2022 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65, 2023 2024 QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66, 2025 QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67, 2026 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68, 2027 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69, 2028 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70, 2029 2030 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71, 2031 2032 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72, 2033 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73, 2034 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74, 2035 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75, 2036 2037 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76, 2038 2039 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77, 2040 2041 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78, 2042 2043 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79, 2044 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80, 2045 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81, 2046 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82, 2047 2048 /* keep last */ 2049 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST, 2050 QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX = 2051 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1 2052 }; 2053 2054 enum qca_wlan_vendor_attr_ll_stats_type { 2055 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0, 2056 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1, 2057 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2, 2058 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3, 2059 2060 /* keep last */ 2061 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST, 2062 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX = 2063 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1, 2064 }; 2065 2066 #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ 2067 2068 /** 2069 * enum qca_wlan_vendor_attr_get_supported_features - get supported feature 2070 * 2071 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID: Invalid initial value 2072 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET: Unsigned 32bit value 2073 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST: After last 2074 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value 2075 */ 2076 enum qca_wlan_vendor_attr_get_supported_features { 2077 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID = 0, 2078 QCA_WLAN_VENDOR_ATTR_FEATURE_SET = 1, 2079 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST, 2080 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX = 2081 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST - 1, 2082 }; 2083 2084 /** 2085 * enum qca_wlan_vendor_attr_set_scanning_mac_oui - set scanning mac oui 2086 * 2087 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID: Invalid initial value 2088 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI: An array of 3 x Unsigned 8-bit 2089 * value 2090 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST: After last 2091 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX: Max value 2092 */ 2093 enum qca_wlan_vendor_attr_set_scanning_mac_oui { 2094 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID = 0, 2095 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI = 1, 2096 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST, 2097 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX = 2098 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST - 1, 2099 }; 2100 2101 /** 2102 * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes 2103 * 2104 * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan 2105 * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes 2106 * with frequencies to be scanned (in MHz) 2107 * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned 2108 * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported 2109 * rates to be included 2110 * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests 2111 * at non CCK rate in 2GHz band 2112 * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags 2113 * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the 2114 * driver for the specific scan request 2115 * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan 2116 * request decoded as in enum scan_status 2117 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation 2118 * scan flag is set 2119 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with 2120 * randomisation 2121 * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: BSSID provided to do scan for specific BSS 2122 */ 2123 enum qca_wlan_vendor_attr_scan { 2124 QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0, 2125 QCA_WLAN_VENDOR_ATTR_SCAN_IE, 2126 QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES, 2127 QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS, 2128 QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES, 2129 QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE, 2130 QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS, 2131 QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE, 2132 QCA_WLAN_VENDOR_ATTR_SCAN_STATUS, 2133 QCA_WLAN_VENDOR_ATTR_SCAN_MAC, 2134 QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK, 2135 QCA_WLAN_VENDOR_ATTR_SCAN_BSSID, 2136 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST, 2137 QCA_WLAN_VENDOR_ATTR_SCAN_MAX = 2138 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1 2139 }; 2140 2141 /** 2142 * enum scan_status - Specifies the valid values the vendor scan attribute 2143 * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take 2144 * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with 2145 * new scan results 2146 * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between 2147 */ 2148 enum scan_status { 2149 VENDOR_SCAN_STATUS_NEW_RESULTS, 2150 VENDOR_SCAN_STATUS_ABORTED, 2151 VENDOR_SCAN_STATUS_MAX, 2152 }; 2153 2154 /** 2155 * enum qca_wlan_vendor_attr_get_concurrency_matrix - get concurrency matrix 2156 * 2157 * NL attributes for data used by 2158 * QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX sub command. 2159 * 2160 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID: Invalid initial value 2161 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX: 2162 * Unsigned 32-bit value 2163 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE: 2164 * Unsigned 32-bit value 2165 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET: Set results. An 2166 * array of SET_SIZE x Unsigned 32bit values representing concurrency 2167 * combinations 2168 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST: After last 2169 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX: Max value 2170 */ 2171 enum qca_wlan_vendor_attr_get_concurrency_matrix { 2172 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID = 0, 2173 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX 2174 = 1, 2175 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE = 2, 2176 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET = 3, 2177 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST, 2178 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX = 2179 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST - 1, 2180 }; 2181 2182 /** 2183 * enum qca_wlan_vendor_attr_set_no_dfs_flag - vendor attribute set no dfs flag 2184 * 2185 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID: Invalid initial value 2186 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG: Unsigned 32-bit value 2187 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST: After last 2188 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX: Max value 2189 */ 2190 enum qca_wlan_vendor_attr_set_no_dfs_flag { 2191 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID = 0, 2192 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG = 1, 2193 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST, 2194 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX = 2195 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST - 1, 2196 }; 2197 2198 /** 2199 * enum qca_vendor_attr_wisa_cmd 2200 * @QCA_WLAN_VENDOR_ATTR_WISA_INVALID: Invalid attr 2201 * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value attr (u32) 2202 * @QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST: After last 2203 * @QCA_WLAN_VENDOR_ATTR_WISA_MAX: Max Value 2204 * WISA setup vendor commands 2205 */ 2206 enum qca_vendor_attr_wisa_cmd { 2207 QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0, 2208 QCA_WLAN_VENDOR_ATTR_WISA_MODE, 2209 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST, 2210 QCA_WLAN_VENDOR_ATTR_WISA_MAX = 2211 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1 2212 }; 2213 2214 enum qca_roaming_policy { 2215 QCA_ROAMING_NOT_ALLOWED, 2216 QCA_ROAMING_ALLOWED_WITHIN_ESS, 2217 }; 2218 2219 /** 2220 * enum qca_wlan_vendor_attr_roam_auth - vendor event for roaming 2221 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID: BSSID of the roamed AP 2222 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE: Request IE 2223 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE: Response IE 2224 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED: Authorization Status 2225 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR: Replay Counter 2226 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK: KCK of the PTK 2227 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK: KEK of the PTK 2228 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS: subnet change status 2229 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS: 2230 * Indicates the status of re-association requested by user space for 2231 * the BSSID specified by QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID. 2232 * Type u16. 2233 * Represents the status code from AP. Use 2234 * %WLAN_STATUS_UNSPECIFIED_FAILURE if the device cannot give you the 2235 * real status code for failures. 2236 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION: 2237 * This attribute indicates that the old association was maintained when 2238 * a re-association is requested by user space and that re-association 2239 * attempt fails (i.e., cannot connect to the requested BSS, but can 2240 * remain associated with the BSS with which the association was in 2241 * place when being requested to roam). Used along with 2242 * WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS to indicate the current 2243 * re-association status. Type flag. 2244 * This attribute is applicable only for re-association failure cases. 2245 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK: AUTH PMK 2246 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID: AUTH PMKID 2247 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM: FILS erp next 2248 * seq number 2249 */ 2250 enum qca_wlan_vendor_attr_roam_auth { 2251 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, 2252 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, 2253 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, 2254 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, 2255 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, 2256 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, 2257 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, 2258 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, 2259 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS, 2260 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS, 2261 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION, 2262 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK, 2263 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID, 2264 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM, 2265 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, 2266 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = 2267 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 2268 }; 2269 2270 /** 2271 * enum qca_wlan_vendor_attr_wifi_config - wifi config 2272 * 2273 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID: Invalid initial value 2274 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM: dynamic DTIM 2275 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR: avg factor 2276 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME: guard time 2277 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST: after last 2278 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX: max value 2279 */ 2280 enum qca_wlan_vendor_attr_wifi_config { 2281 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID = 0, 2282 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM = 1, 2283 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR = 2, 2284 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME = 3, 2285 2286 /* keep last */ 2287 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST, 2288 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX = 2289 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST - 1, 2290 }; 2291 2292 /** 2293 * enum qca_wlan_epno_type - the type of request to the EPNO command 2294 * @QCA_WLAN_EPNO: epno type request 2295 * @QCA_WLAN_PNO: pno type request 2296 */ 2297 enum qca_wlan_epno_type { 2298 QCA_WLAN_EPNO, 2299 QCA_WLAN_PNO 2300 }; 2301 2302 /** 2303 * enum qca_wlan_vendor_attr_pno_config_params - pno config params 2304 * 2305 * @QCA_WLAN_VENDOR_ATTR_PNO_INVALID - Invalid initial value 2306 * 2307 * NL attributes for data used by 2308 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command. 2309 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM: 2310 * Unsigned 32-bit value; pno passpoint number of networks 2311 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY: 2312 * Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_* 2313 * attributes. Array size = 2314 * QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM. 2315 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID: 2316 * Unsigned 32-bit value; network id 2317 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM: 2318 * An array of 256 x Unsigned 8-bit value; NULL terminated UTF8 encoded 2319 * realm, 0 if unspecified. 2320 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID: 2321 * An array of 16 x Unsigned 32-bit value; roaming consortium ids 2322 * to match, 0 if unspecified. 2323 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN: 2324 * An array of 6 x Unsigned 8-bit value; mcc/mnc combination, 0s if 2325 * unspecified. 2326 * 2327 * NL attributes for data used by 2328 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command. 2329 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS: 2330 * Unsigned 32-bit value; set pno number of networks 2331 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST: 2332 * Array of nested 2333 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_* 2334 * attributes. Array size = 2335 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS 2336 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID: 2337 * An array of 33 x Unsigned 8-bit value; NULL terminated SSID 2338 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD: 2339 * Signed 8-bit value; threshold for considering this SSID as found, 2340 * required granularity for this threshold is 4dBm to 8dBm 2341 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS: 2342 * Unsigned 8-bit value; WIFI_PNO_FLAG_XXX 2343 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT: 2344 * Unsigned 8-bit value; auth bit field for matching WPA IE 2345 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE 2346 * Unsigned 8-bit to indicate ePNO type; values from qca_wlan_epno_type 2347 *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST 2348 * Nested attribute to send the channel list 2349 *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL 2350 * Unsigned 32-bit value; indicates the Interval between PNO scan 2351 * cycles in msec 2352 *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI 2353 * Signed 32-bit value; minimum 5GHz RSSI for a BSSID to be considered 2354 *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI 2355 * Signed 32-bit value; minimum 2.4GHz RSSI for a BSSID to be considered 2356 * This attribute is obsolete now. 2357 *@QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX 2358 * Signed 32-bit value; the maximum score that a network 2359 * can have before bonuses 2360 *@QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS 2361 * Signed 32-bit value; only report when there is a network's 2362 * score this much higher han the current connection 2363 *@QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS 2364 * Signed 32-bit value; score bonus for all networks with 2365 * the same network flag 2366 *@QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS 2367 * Signed 32-bit value; score bonus for networks that are not open 2368 *@QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS 2369 * Signed 32-bit value; 5GHz RSSI score bonus applied to all 2370 * 5GHz networks 2371 *@QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID 2372 * Unsigned 32-bit value, representing the PNO Request ID 2373 * @QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST: After last 2374 * @QCA_WLAN_VENDOR_ATTR_PNO_MAX: max 2375 */ 2376 enum qca_wlan_vendor_attr_pno_config_params { 2377 QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0, 2378 2379 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1, 2380 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2, 2381 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3, 2382 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4, 2383 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5, 2384 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6, 2385 2386 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7, 2387 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8, 2388 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9, 2389 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD = 10, 2390 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11, 2391 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12, 2392 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13, 2393 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14, 2394 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15, 2395 QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16, 2396 QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17, 2397 QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18, 2398 QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19, 2399 QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20, 2400 QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21, 2401 QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22, 2402 2403 QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID = 23, 2404 /* keep last */ 2405 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST, 2406 QCA_WLAN_VENDOR_ATTR_PNO_MAX = 2407 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1, 2408 }; 2409 2410 /** 2411 * enum qca_wlan_vendor_attr_roaming_config_params - roaming config params 2412 * 2413 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID: Invalid initial value 2414 * @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: roaming sub command 2415 * @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Request id 2416 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: 2417 * number of whitelist networks 2418 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: 2419 * Whitelist ssid list 2420 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: 2421 * white list ssid 2422 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: 2423 * 'a' band boost threshold 2424 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: 2425 * 'a' band penalty threshold 2426 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: 2427 * 'a' band boost factor 2428 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: 2429 * 'a' band penalty factor 2430 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: 2431 * 'a' band max boost 2432 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: 2433 * lazy roam histeresys 2434 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: 2435 * alert roam rssi trigger 2436 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: 2437 * set lazy roam enable 2438 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: 2439 * set bssid preference 2440 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: 2441 * set lazy roam number of bssid 2442 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 2443 * set lazy roam bssid 2444 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: 2445 * set lazy roam rssi modifier 2446 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: 2447 * set bssid params 2448 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: 2449 * set bssid params num bssid 2450 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 2451 * set bssid params bssid 2452 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST: After last 2453 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX: Max 2454 */ 2455 enum qca_wlan_vendor_attr_roaming_config_params { 2456 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0, 2457 2458 QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1, 2459 QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2, 2460 2461 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3, 2462 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4, 2463 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5, 2464 2465 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6, 2466 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7, 2467 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8, 2468 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9, 2469 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10, 2470 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11, 2471 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12, 2472 2473 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13, 2474 2475 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14, 2476 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15, 2477 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16, 2478 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17, 2479 2480 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18, 2481 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19, 2482 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20, 2483 2484 /* keep last */ 2485 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST, 2486 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX = 2487 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1, 2488 }; 2489 2490 /** 2491 * enum qca_wlan_vendor_attr_roam_subcmd - roam sub commands 2492 * 2493 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID: Invalid initial value 2494 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST: ssid white list 2495 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS: roam params 2496 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM: set lazy roam 2497 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS: set bssid prefs 2498 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS: set bssid params 2499 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID: set blacklist bssid 2500 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST: after last 2501 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX: subcmd max 2502 */ 2503 enum qca_wlan_vendor_attr_roam_subcmd { 2504 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0, 2505 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1, 2506 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS = 2, 2507 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3, 2508 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4, 2509 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5, 2510 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6, 2511 2512 /* KEEP LAST */ 2513 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST, 2514 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX = 2515 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1, 2516 }; 2517 2518 /** 2519 * enum qca_wlan_vendor_attr_get_wifi_info - wifi driver information 2520 * 2521 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID: Invalid initial value 2522 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: get host driver version 2523 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: ger firmware version 2524 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX - get radio index 2525 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST: after last 2526 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX: subcmd max 2527 */ 2528 enum qca_wlan_vendor_attr_get_wifi_info { 2529 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0, 2530 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1, 2531 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2, 2532 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3, 2533 2534 /* KEEP LAST */ 2535 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST, 2536 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX = 2537 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1, 2538 }; 2539 2540 enum qca_wlan_vendor_attr_logger_results { 2541 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0, 2542 2543 /* 2544 * Unsigned 32-bit value; must match the request Id supplied by 2545 * Wi-Fi HAL in the corresponding subcmd NL msg. 2546 */ 2547 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1, 2548 2549 /* 2550 * Unsigned 32-bit value; used to indicate the size of memory 2551 * dump to be allocated. 2552 */ 2553 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2, 2554 2555 /* keep last */ 2556 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST, 2557 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX = 2558 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1, 2559 }; 2560 2561 /** 2562 * qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel. 2563 * This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS. 2564 */ 2565 enum qca_wlan_vendor_channel_prop_flags { 2566 /* Bits 0, 1, 2, and 3 are reserved */ 2567 2568 /* Turbo channel */ 2569 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4, 2570 /* CCK channel */ 2571 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5, 2572 /* OFDM channel */ 2573 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6, 2574 /* 2.4 GHz spectrum channel. */ 2575 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7, 2576 /* 5 GHz spectrum channel */ 2577 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8, 2578 /* Only passive scan allowed */ 2579 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9, 2580 /* Dynamic CCK-OFDM channel */ 2581 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10, 2582 /* GFSK channel (FHSS PHY) */ 2583 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11, 2584 /* Radar found on channel */ 2585 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12, 2586 /* 11a static turbo channel only */ 2587 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13, 2588 /* Half rate channel */ 2589 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14, 2590 /* Quarter rate channel */ 2591 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15, 2592 /* HT 20 channel */ 2593 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16, 2594 /* HT 40 with extension channel above */ 2595 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17, 2596 /* HT 40 with extension channel below */ 2597 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18, 2598 /* HT 40 intolerant */ 2599 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19, 2600 /* VHT 20 channel */ 2601 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20, 2602 /* VHT 40 with extension channel above */ 2603 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21, 2604 /* VHT 40 with extension channel below */ 2605 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22, 2606 /* VHT 80 channel */ 2607 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23, 2608 /* HT 40 intolerant mark bit for ACS use */ 2609 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24, 2610 /* Channel temporarily blocked due to noise */ 2611 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25, 2612 /* VHT 160 channel */ 2613 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26, 2614 /* VHT 80+80 channel */ 2615 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27, 2616 /* HE 20 channel */ 2617 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE20 = 1 << 28, 2618 /* HE 40 with extension channel above */ 2619 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40PLUS = 1 << 29, 2620 /* HE 40 with extension channel below */ 2621 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS = 1 << 30, 2622 /* HE 40 intolerant */ 2623 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31, 2624 }; 2625 2626 /** 2627 * qca_wlan_vendor_channel_prop_flags_2: This represents the flags for a 2628 * channel, and is a continuation of qca_wlan_vendor_channel_prop_flags. This is 2629 * used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2. 2630 */ 2631 enum qca_wlan_vendor_channel_prop_flags_2 { 2632 /* HE 40 intolerant mark bit for ACS use */ 2633 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOLMARK = 1 << 0, 2634 /* HE 80 channel */ 2635 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80 = 1 << 1, 2636 /* HE 160 channel */ 2637 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE160 = 1 << 2, 2638 /* HE 80+80 channel */ 2639 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80_80 = 1 << 3, 2640 }; 2641 2642 /** 2643 * qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for 2644 * each channel. This is used by 2645 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT. 2646 */ 2647 enum qca_wlan_vendor_channel_prop_flags_ext { 2648 /* Radar found on channel */ 2649 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0, 2650 /* DFS required on channel */ 2651 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1, 2652 /* DFS required on channel for 2nd band of 80+80 */ 2653 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2, 2654 /* If channel has been checked for DFS */ 2655 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3, 2656 /* Excluded in 802.11d */ 2657 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4, 2658 /* Channel Switch Announcement received on this channel */ 2659 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5, 2660 /* Ad-hoc is not allowed */ 2661 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6, 2662 /* Station only channel */ 2663 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7, 2664 /* DFS radar history for slave device (STA mode) */ 2665 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8, 2666 /* DFS CAC valid for slave device (STA mode) */ 2667 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9, 2668 }; 2669 2670 /** 2671 * qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd 2672 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite 2673 * information to start/stop the NUD statistics collection. 2674 */ 2675 enum qca_attr_nud_stats_set { 2676 QCA_ATTR_NUD_STATS_SET_INVALID = 0, 2677 2678 /* 2679 * Flag to start/stop the NUD statistics collection. 2680 * Start - If included, Stop - If not included 2681 */ 2682 QCA_ATTR_NUD_STATS_SET_START = 1, 2683 /* IPv4 address of the default gateway (in network byte order) */ 2684 QCA_ATTR_NUD_STATS_GW_IPV4 = 2, 2685 /* 2686 * Represents the data packet type to be monitored. 2687 * Host driver tracks the stats corresponding to each data frame 2688 * represented by these flags. 2689 * These data packets are represented by 2690 * enum qca_wlan_vendor_nud_stats_set_data_pkt_info. 2691 */ 2692 QCA_ATTR_NUD_STATS_SET_DATA_PKT_INFO = 3, 2693 /* keep last */ 2694 QCA_ATTR_NUD_STATS_SET_LAST, 2695 QCA_ATTR_NUD_STATS_SET_MAX = 2696 QCA_ATTR_NUD_STATS_SET_LAST - 1, 2697 }; 2698 2699 /** 2700 * enum qca_attr_connectivity_check_stats_set - attribute to vendor subcmd 2701 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2702 * information to start / stop the NUD stats collection. 2703 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_STATS_PKT_INFO_TYPE: set pkt info stats 2704 * Bitmap to Flag to Start / Stop the NUD stats collection 2705 * Start - If included , Stop - If not included 2706 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DNS_DOMAIN_NAME: set gatway ipv4 address 2707 * IPv4 address of Default Gateway (in network byte order) 2708 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2709 * information to start / stop the NUD stats collection. 2710 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_SRC_PORT: set nud debug stats 2711 * Flag to Start / Stop the NUD stats collection 2712 * Start - If included , Stop - If not included 2713 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_PORT: set gatway ipv4 address 2714 * IPv4 address of Default Gateway (in network byte order) 2715 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2716 * information to start / stop the NUD stats collection. 2717 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV4: set nud debug stats 2718 * Flag to Start / Stop the NUD stats collection 2719 * Start - If included , Stop - If not included 2720 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV6: set gatway ipv4 address 2721 * IPv4 address of Default Gateway (in network byte order) 2722 */ 2723 enum qca_attr_connectivity_check_stats_set { 2724 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_INVALID = 0, 2725 QCA_ATTR_CONNECTIVITY_CHECK_STATS_STATS_PKT_INFO_TYPE = 1, 2726 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DNS_DOMAIN_NAME = 2, 2727 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SRC_PORT = 3, 2728 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_PORT = 4, 2729 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV4 = 5, 2730 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV6 = 6, 2731 /* keep last */ 2732 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_LAST, 2733 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_MAX = 2734 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_LAST - 1, 2735 }; 2736 2737 /** 2738 * qca_wlan_vendor_nud_stats_data_pkt_flags: Flag representing the various 2739 * data types for which the stats have to get collected. 2740 */ 2741 enum qca_wlan_vendor_connectivity_check_pkt_flags { 2742 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ARP = 1 << 0, 2743 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_DNS = 1 << 1, 2744 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_HANDSHAKE = 1 << 2, 2745 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ICMPV4 = 1 << 3, 2746 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ICMPV6 = 1 << 4, 2747 /* Used by QCA_ATTR_NUD_STATS_PKT_TYPE only in nud stats get 2748 * to represent the stats of respective data type. 2749 */ 2750 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_SYN = 1 << 5, 2751 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_SYN_ACK = 1 << 6, 2752 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_ACK = 1 << 7, 2753 }; 2754 2755 enum qca_attr_connectivity_check_stats { 2756 QCA_ATTR_CONNECTIVITY_CHECK_STATS_INVALID = 0, 2757 /* Data packet type for which the stats are collected. 2758 * Represented by enum qca_wlan_vendor_nud_stats_data_pkt_flags 2759 */ 2760 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_TYPE = 1, 2761 /* ID corresponding to the DNS frame for which the respective DNS stats 2762 * are monitored (u32). 2763 */ 2764 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DNS_DOMAIN_NAME = 2, 2765 /* source / destination port on which the respective proto stats are 2766 * collected (u32). 2767 */ 2768 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_SRC_PORT = 3, 2769 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_PORT = 4, 2770 /* IPv4/IPv6 address for which the destined data packets are 2771 * monitored. (in network byte order) 2772 */ 2773 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_IPV4 = 5, 2774 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_IPV6 = 6, 2775 /* Data packet Request count received from netdev */ 2776 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_FROM_NETDEV = 7, 2777 /* Data packet Request count sent to lower MAC from upper MAC */ 2778 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_TO_LOWER_MAC = 8, 2779 /* Data packet Request count received by lower MAC from upper MAC */ 2780 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_RX_COUNT_BY_LOWER_MAC = 9, 2781 /* Data packet Request count successfully transmitted by the device */ 2782 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_TX_SUCCESS = 10, 2783 /* Data packet Response count received by lower MAC */ 2784 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_RX_COUNT_BY_LOWER_MAC = 11, 2785 /* Data packet Response count received by upper MAC */ 2786 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_RX_COUNT_BY_UPPER_MAC = 12, 2787 /* Data packet Response count delivered to netdev */ 2788 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_COUNT_TO_NETDEV = 13, 2789 /* Data Packet Response count that are dropped out of order */ 2790 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_COUNT_OUT_OF_ORDER_DROP = 14, 2791 2792 /* keep last */ 2793 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_LAST, 2794 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_MAX = 2795 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_LAST - 1, 2796 }; 2797 2798 /** 2799 * qca_attr_nud_stats_get: Attributes to vendor subcmd 2800 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite 2801 * NUD statistics collected when queried. 2802 */ 2803 enum qca_attr_nud_stats_get { 2804 QCA_ATTR_NUD_STATS_GET_INVALID = 0, 2805 /* ARP Request count from netdev */ 2806 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1, 2807 /* ARP Request count sent to lower MAC from upper MAC */ 2808 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2, 2809 /* ARP Request count received by lower MAC from upper MAC */ 2810 QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3, 2811 /* ARP Request count successfully transmitted by the device */ 2812 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4, 2813 /* ARP Response count received by lower MAC */ 2814 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5, 2815 /* ARP Response count received by upper MAC */ 2816 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6, 2817 /* ARP Response count delivered to netdev */ 2818 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7, 2819 /* ARP Response count delivered to netdev */ 2820 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8, 2821 /* 2822 * Flag indicating if the station's link to the AP is active. 2823 * Active Link - If included, Inactive link - If not included 2824 */ 2825 QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE = 9, 2826 /* 2827 * Flag indicating if there is any duplicate address detected (DAD). 2828 * Yes - If detected, No - If not detected. 2829 */ 2830 QCA_ATTR_NUD_STATS_IS_DAD = 10, 2831 /* 2832 * List of Data types for which the stats are requested. 2833 * This list does not carry ARP stats as they are done by the 2834 * above attributes. Represented by enum qca_attr_nud_data_stats. 2835 */ 2836 QCA_ATTR_NUD_STATS_DATA_PKT_STATS = 11, 2837 /* keep last */ 2838 QCA_ATTR_NUD_STATS_GET_LAST, 2839 QCA_ATTR_NUD_STATS_GET_MAX = 2840 QCA_ATTR_NUD_STATS_GET_LAST - 1, 2841 }; 2842 2843 enum qca_wlan_btm_candidate_status { 2844 QCA_STATUS_ACCEPT = 0, 2845 QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1, 2846 QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2, 2847 QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3, 2848 QCA_STATUS_REJECT_LOW_RSSI = 4, 2849 QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5, 2850 QCA_STATUS_REJECT_UNKNOWN = 6, 2851 }; 2852 2853 enum qca_wlan_vendor_attr_btm_candidate_info { 2854 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0, 2855 2856 /* 6-byte MAC address representing the BSSID of transition candidate */ 2857 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1, 2858 /* 2859 * Unsigned 32-bit value from enum qca_wlan_btm_candidate_status 2860 * returned by the driver. It says whether the BSSID provided in 2861 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by 2862 * the driver, if not it specifies the reason for rejection. 2863 * Note that the user-space can overwrite the transition reject reason 2864 * codes provided by driver based on more information. 2865 */ 2866 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2, 2867 2868 /* keep last */ 2869 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST, 2870 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX = 2871 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1, 2872 }; 2873 2874 enum qca_attr_trace_level { 2875 QCA_ATTR_TRACE_LEVEL_INVALID = 0, 2876 /* 2877 * Nested array of the following attributes: 2878 * QCA_ATTR_TRACE_LEVEL_MODULE, 2879 * QCA_ATTR_TRACE_LEVEL_MASK. 2880 */ 2881 QCA_ATTR_TRACE_LEVEL_PARAM = 1, 2882 /* 2883 * Specific QCA host driver module. Please refer to the QCA host 2884 * driver implementation to get the specific module ID. 2885 */ 2886 QCA_ATTR_TRACE_LEVEL_MODULE = 2, 2887 /* Different trace level masks represented in the QCA host driver. */ 2888 QCA_ATTR_TRACE_LEVEL_MASK = 3, 2889 2890 /* keep last */ 2891 QCA_ATTR_TRACE_LEVEL_AFTER_LAST, 2892 QCA_ATTR_TRACE_LEVEL_MAX = 2893 QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1, 2894 }; 2895 2896 /** 2897 * enum qca_wlan_vendor_attr_get_logger_features - value for logger 2898 * supported features 2899 * @QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID - Invalid 2900 * @QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED - Indicate the supported features 2901 * @QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - To keep track of the last enum 2902 * @QCA_WLAN_VENDOR_ATTR_LOGGER_MAX - max value possible for this type 2903 * 2904 * enum values are used for NL attributes for data used by 2905 * QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET sub command. 2906 */ 2907 enum qca_wlan_vendor_attr_get_logger_features { 2908 QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0, 2909 QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1, 2910 2911 /* keep last */ 2912 QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST, 2913 QCA_WLAN_VENDOR_ATTR_LOGGER_MAX = 2914 QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1, 2915 }; 2916 2917 /** 2918 * enum qca_wlan_vendor_attr_link_properties - link properties 2919 * 2920 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID: Invalid initial value 2921 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS: Unsigned 8-bit value to 2922 * specify the number of spatial streams negotiated 2923 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS: Unsigned 8-bit value 2924 * to specify negotiated rate flags i.e. ht, vht and channel width 2925 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ: Unsigned 32bit value to 2926 * specify the operating frequency 2927 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST: after last 2928 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX: max value 2929 */ 2930 enum qca_wlan_vendor_attr_link_properties { 2931 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0, 2932 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS = 1, 2933 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS = 2, 2934 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ = 3, 2935 2936 /* KEEP LAST */ 2937 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST, 2938 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX = 2939 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1, 2940 }; 2941 2942 /** 2943 * enum qca_wlan_vendor_attr_nd_offload - vendor NS offload support 2944 * 2945 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID - Invalid 2946 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG - Flag to set NS offload 2947 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - To keep track of the last enum 2948 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX - max value possible for this type 2949 * 2950 * enum values are used for NL attributes for data used by 2951 * QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD sub command. 2952 */ 2953 enum qca_wlan_vendor_attr_nd_offload { 2954 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0, 2955 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG, 2956 2957 /* Keep last */ 2958 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST, 2959 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX = 2960 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1, 2961 }; 2962 2963 /** 2964 * enum qca_wlan_vendor_features - vendor device/driver features 2965 * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key 2966 * management offload, a mechanism where the station's firmware 2967 * does the exchange with the AP to establish the temporal keys 2968 * after roaming, rather than having the supplicant do it. 2969 * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports 2970 * simultaneous off-channel operations. 2971 * @QQCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P 2972 * Listen offload; a mechanism where the station's firmware 2973 * takes care of responding to incoming Probe Request frames received 2974 * from other P2P devices whilst in Listen state, rather than having the 2975 * user space wpa_supplicant do it. Information from received P2P 2976 * Requests are forwarded from firmware to host whenever the APPS 2977 * processor exits power collapse state. 2978 * @QCA_WLAN_VENDOR_FEATURE_OCE_STA: Device supports all OCE non-AP STA 2979 * specific features 2980 * @QCA_WLAN_VENDOR_FEATURE_OCE_AP: Device supports all OCE AP specific 2981 * features. 2982 * @QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON: Device supports OCE STA-CFON 2983 * specific features only. If a Device sets this bit but not the 2984 * QCA_WLAN_VENDOR_FEATURE_OCE_AP, the userspace shall assume that 2985 * this Device may not support all OCE AP functionalities but can support 2986 * only OCE STA-CFON functionalities. 2987 * @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self 2988 * managed regulatory. 2989 */ 2990 enum qca_wlan_vendor_features { 2991 QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, 2992 QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1, 2993 QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2, 2994 QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3, 2995 QCA_WLAN_VENDOR_FEATURE_OCE_STA = 4, 2996 QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5, 2997 QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6, 2998 QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7, 2999 /* Additional features need to be added above this */ 3000 NUM_QCA_WLAN_VENDOR_FEATURES 3001 }; 3002 3003 /** 3004 * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for SAP 3005 * conditional channel switch 3006 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID: Invalid initial 3007 * value 3008 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST: Priority based 3009 * frequency list (an array of u32 values in host byte order) 3010 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS: Status of the 3011 * conditional switch (u32)- 0: Success, Non-zero: Failure 3012 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST: After last 3013 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX: Subcommand max 3014 */ 3015 enum qca_wlan_vendor_attr_sap_conditional_chan_switch { 3016 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0, 3017 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1, 3018 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2, 3019 3020 /* Keep Last */ 3021 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST, 3022 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX = 3023 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1, 3024 }; 3025 3026 /** 3027 * enum wifi_logger_supported_features - values for supported logger features 3028 * @WIFI_LOGGER_MEMORY_DUMP_SUPPORTED: Memory dump of FW 3029 * @WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED: Per packet statistics 3030 * @WIFI_LOGGER_CONNECT_EVENT_SUPPORTED: Logging of Connectivity events 3031 * @WIFI_LOGGER_POWER_EVENT_SUPPORTED: Power of driver 3032 * @WIFI_LOGGER_WAKE_LOCK_SUPPORTE: Wakelock of driver 3033 * @WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED: monitor FW health 3034 * @WIFI_LOGGER_DRIVER_DUMP_SUPPORTED: support driver dump 3035 * @WIFI_LOGGER_PACKET_FATE_SUPPORTED: tracks connection packets fate 3036 */ 3037 enum wifi_logger_supported_features { 3038 WIFI_LOGGER_MEMORY_DUMP_SUPPORTED = (1 << (0)), 3039 WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED = (1 << (1)), 3040 WIFI_LOGGER_CONNECT_EVENT_SUPPORTED = (1 << (2)), 3041 WIFI_LOGGER_POWER_EVENT_SUPPORTED = (1 << (3)), 3042 WIFI_LOGGER_WAKE_LOCK_SUPPORTED = (1 << (4)), 3043 WIFI_LOGGER_VERBOSE_SUPPORTED = (1 << (5)), 3044 WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED = (1 << (6)), 3045 WIFI_LOGGER_DRIVER_DUMP_SUPPORTED = (1 << (7)), 3046 WIFI_LOGGER_PACKET_FATE_SUPPORTED = (1 << (8)) 3047 }; 3048 /** 3049 * enum qca_wlan_vendor_attr_acs_offload 3050 * 3051 * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: ACS selected primary channel 3052 * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: ACS selected secondary channel 3053 * @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: hw_mode for ACS 3054 * @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: indicate if HT capability is enabled 3055 * @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: indicate HT capability 3056 */ 3057 enum qca_wlan_vendor_attr_acs_offload { 3058 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, 3059 QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL, 3060 QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL, 3061 QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE, 3062 QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED, 3063 QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED, 3064 QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED, 3065 QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH, 3066 QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST, 3067 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL, 3068 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL, 3069 QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST, 3070 /* keep last */ 3071 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, 3072 QCA_WLAN_VENDOR_ATTR_ACS_MAX = 3073 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 3074 }; 3075 3076 /** 3077 * enum qca_wlan_vendor_acs_hw_mode 3078 * 3079 * @QCA_ACS_MODE_IEEE80211B: 11b mode 3080 * @QCA_ACS_MODE_IEEE80211G: 11g mode 3081 * @QCA_ACS_MODE_IEEE80211A: 11a mode 3082 * @QCA_ACS_MODE_IEEE80211AD: 11ad mode 3083 */ 3084 enum qca_wlan_vendor_acs_hw_mode { 3085 QCA_ACS_MODE_IEEE80211B, 3086 QCA_ACS_MODE_IEEE80211G, 3087 QCA_ACS_MODE_IEEE80211A, 3088 QCA_ACS_MODE_IEEE80211AD, 3089 QCA_ACS_MODE_IEEE80211ANY, 3090 }; 3091 3092 /** 3093 * enum qca_access_policy - access control policy 3094 * 3095 * Access control policy is applied on the configured IE 3096 * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE). 3097 * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY. 3098 * 3099 * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi Connections which match 3100 *» with the specific configuration (IE) set, i.e. allow all the 3101 *» connections which do not match the configuration. 3102 * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi Connections which match 3103 *» with the specific configuration (IE) set, i.e. deny all the 3104 *» connections which do not match the configuration. 3105 */ 3106 enum qca_access_policy { 3107 QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED, 3108 QCA_ACCESS_POLICY_DENY_UNLESS_LISTED, 3109 }; 3110 3111 /** 3112 * enum qca_ignore_assoc_disallowed - Ignore assoc disallowed values 3113 * 3114 * The valid values for the ignore assoc disallowed 3115 * 3116 * @QCA_IGNORE_ASSOC_DISALLOWED_DISABLE: Disable ignore assoc disallowed 3117 * @QCA_IGNORE_ASSOC_DISALLOWED_ENABLE: Enable ignore assoc disallowed 3118 * 3119 */ 3120 enum qca_ignore_assoc_disallowed { 3121 QCA_IGNORE_ASSOC_DISALLOWED_DISABLE, 3122 QCA_IGNORE_ASSOC_DISALLOWED_ENABLE 3123 }; 3124 3125 /* Attributes for data used by 3126 * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and 3127 * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands. 3128 */ 3129 enum qca_wlan_vendor_attr_config { 3130 QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0, 3131 /* 3132 * Unsigned 32-bit value to set the DTIM period. 3133 * Whether the wifi chipset wakes at every dtim beacon or a multiple of 3134 * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3 3135 * DTIM beacons. 3136 */ 3137 QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM = 1, 3138 /* 3139 * Unsigned 32-bit value to set the wifi_iface stats averaging factor 3140 * used to calculate statistics like average the TSF offset or average 3141 * number of frame leaked. 3142 * For instance, upon Beacon frame reception: 3143 * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000 3144 * For instance, when evaluating leaky APs: 3145 * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000 3146 */ 3147 QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2, 3148 /* 3149 * Unsigned 32-bit value to configure guard time, i.e., when 3150 * implementing IEEE power management based on frame control PM bit, how 3151 * long the driver waits before shutting down the radio and after 3152 * receiving an ACK frame for a Data frame with PM bit set. 3153 */ 3154 QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3, 3155 /* Unsigned 32-bit value to change the FTM capability dynamically */ 3156 QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4, 3157 /* Unsigned 16-bit value to configure maximum TX rate dynamically */ 3158 QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5, 3159 /* 3160 * Unsigned 32-bit value to configure the number of continuous 3161 * Beacon Miss which shall be used by the firmware to penalize 3162 * the RSSI. 3163 */ 3164 QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6, 3165 /* 3166 * Unsigned 8-bit value to configure the channel avoidance indication 3167 * behavior. Firmware to send only one indication and ignore duplicate 3168 * indications when set to avoid multiple Apps wakeups. 3169 */ 3170 QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7, 3171 /* 3172 * 8-bit unsigned value to configure the maximum TX MPDU for 3173 * aggregation. 3174 */ 3175 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8, 3176 /* 3177 * 8-bit unsigned value to configure the maximum RX MPDU for 3178 * aggregation. 3179 */ 3180 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9, 3181 /* 3182 * 8-bit unsigned value to configure the Non aggregrate/11g sw 3183 * retry threshold (0 disable, 31 max). 3184 */ 3185 QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10, 3186 /* 3187 * 8-bit unsigned value to configure the aggregrate sw 3188 * retry threshold (0 disable, 31 max). 3189 */ 3190 QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11, 3191 /* 3192 * 8-bit unsigned value to configure the MGMT frame 3193 * retry threshold (0 disable, 31 max). 3194 */ 3195 QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12, 3196 /* 3197 * 8-bit unsigned value to configure the CTRL frame 3198 * retry threshold (0 disable, 31 max). 3199 */ 3200 QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13, 3201 /* 3202 * 8-bit unsigned value to configure the propagation delay for 3203 * 2G/5G band (0~63, units in us) 3204 */ 3205 QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14, 3206 /* 3207 * Unsigned 32-bit value to configure the number of unicast TX fail 3208 * packet count. The peer is disconnected once this threshold is 3209 * reached. 3210 */ 3211 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15, 3212 /* 3213 * Attribute used to set scan default IEs to the driver. 3214 * 3215 * These IEs can be used by scan operations that will be initiated by 3216 * the driver/firmware. 3217 * 3218 * For further scan requests coming to the driver, these IEs should be 3219 * merged with the IEs received along with scan request coming to the 3220 * driver. If a particular IE is present in the scan default IEs but not 3221 * present in the scan request, then that IE should be added to the IEs 3222 * sent in the Probe Request frames for that scan request. 3223 */ 3224 QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16, 3225 /* Unsigned 32-bit attribute for generic commands */ 3226 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17, 3227 /* Unsigned 32-bit value attribute for generic commands */ 3228 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18, 3229 /* Unsigned 32-bit data attribute for generic command response */ 3230 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19, 3231 /* 3232 * Unsigned 32-bit length attribute for 3233 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA 3234 */ 3235 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20, 3236 /* 3237 * Unsigned 32-bit flags attribute for 3238 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA 3239 */ 3240 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21, 3241 /* 3242 * Unsigned 32-bit, defining the access policy. 3243 * See enum qca_access_policy. Used with 3244 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. 3245 */ 3246 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22, 3247 /* 3248 * Sets the list of full set of IEs for which a specific access policy 3249 * has to be applied. Used along with 3250 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access. 3251 * Zero length payload can be used to clear this access constraint. 3252 */ 3253 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23, 3254 /* 3255 * Unsigned 32-bit, specifies the interface index (netdev) for which the 3256 * corresponding configurations are applied. If the interface index is 3257 * not specified, the configurations are attributed to the respective 3258 * wiphy. 3259 */ 3260 QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24, 3261 /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */ 3262 QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25, 3263 /* 3264 * 8-bit unsigned value to configure the driver and below layers to 3265 * ignore the assoc disallowed set by APs while connecting 3266 * 1-Ignore, 0-Don't ignore 3267 */ 3268 QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26, 3269 /* 3270 * 32-bit unsigned value to trigger antenna diversity features: 3271 * 1-Enable, 0-Disable 3272 */ 3273 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27, 3274 /* 32-bit unsigned value to configure specific chain antenna */ 3275 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28, 3276 /* 3277 * 32-bit unsigned value to trigger cycle selftest 3278 * 1-Enable, 0-Disable 3279 */ 3280 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29, 3281 /* 3282 * 32-bit unsigned to configure the cycle time of selftest 3283 * the unit is micro-second 3284 */ 3285 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30, 3286 /* 32-bit unsigned value to set reorder timeout for AC_VO */ 3287 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31, 3288 /* 32-bit unsigned value to set reorder timeout for AC_VI */ 3289 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32, 3290 /* 32-bit unsigned value to set reorder timeout for AC_BE */ 3291 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33, 3292 /* 32-bit unsigned value to set reorder timeout for AC_BK */ 3293 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34, 3294 /* 6-byte MAC address to point out the specific peer */ 3295 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35, 3296 /* 32-bit unsigned value to set window size for specific peer */ 3297 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36, 3298 /* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */ 3299 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37, 3300 /* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */ 3301 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38, 3302 /* 3303 * 32-bit unsigned value to configure 5 or 10 MHz channel width for 3304 * station device while in disconnect state. The attribute use the 3305 * value of enum nl80211_chan_width: NL80211_CHAN_WIDTH_5 means 5 MHz, 3306 * NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or 3307 * 10 MHz channel width, the station will not connect to a BSS using 20 3308 * MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to 3309 * clear this constraint. 3310 */ 3311 QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39, 3312 /* 3313 * 32-bit unsigned value to configure the propagation absolute delay 3314 * for 2G/5G band (units in us) 3315 */ 3316 QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40, 3317 /* 32-bit unsigned value to set probe period */ 3318 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41, 3319 /* 32-bit unsigned value to set stay period */ 3320 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD = 42, 3321 /* 32-bit unsigned value to set snr diff */ 3322 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SNR_DIFF = 43, 3323 /* 32-bit unsigned value to set probe dwell time */ 3324 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_DWELL_TIME = 44, 3325 /* 32-bit unsigned value to set mgmt snr weight */ 3326 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT = 45, 3327 /* 32-bit unsigned value to set data snr weight */ 3328 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT = 46, 3329 /* 32-bit unsigned value to set ack snr weight */ 3330 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT = 47, 3331 /* 3332 * 32-bit unsigned value to configure the listen interval. 3333 * This is in units of beacon intervals. This configuration alters 3334 * the negotiated listen interval with the AP during the connection. 3335 * It is highly recommended to configure a value less than or equal to 3336 * the one negotiated during the association. Configuring any greater 3337 * value can have adverse effects (frame loss, AP disassociating STA, 3338 * etc.). 3339 */ 3340 QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL = 48, 3341 /* 3342 * 8 bit unsigned value that is set on an AP/GO virtual interface to 3343 * disable operations that would cause the AP/GO to leave its operating 3344 * channel. 3345 * 3346 * This will restrict the scans to the AP/GO operating channel and the 3347 * channels of the other band, if DBS is supported.A STA/CLI interface 3348 * brought up after this setting is enabled, will be restricted to 3349 * connecting to devices only on the AP/GO interface's operating channel 3350 * or on the other band in DBS case. P2P supported channel list is 3351 * modified, to only include AP interface's operating-channel and the 3352 * channels of the other band if DBS is supported. 3353 * 3354 * These restrictions are only applicable as long as the AP/GO interface 3355 * is alive. If the AP/GO interface is brought down then this 3356 * setting/restriction is forgotten. 3357 * 3358 * If this variable is set on an AP/GO interface while a multi-channel 3359 * concurrent session is active, it has no effect on the operation of 3360 * the current interfaces, other than restricting the scan to the AP/GO 3361 * operating channel and the other band channels if DBS is supported. 3362 * However, if the STA is brought down and restarted then the new STA 3363 * connection will either be formed on the AP/GO channel or on the 3364 * other band in a DBS case. This is because of the scan being 3365 * restricted on these channels as mentioned above. 3366 * 3367 * 1-Disable offchannel operations, 0-Enable offchannel operations. 3368 */ 3369 QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL = 49, 3370 3371 /* 3372 * 8 bit unsigned value to enable/disable LRO (Large Receive Offload) 3373 * on an interface. 3374 * 1 - Enable , 0 - Disable. 3375 */ 3376 QCA_WLAN_VENDOR_ATTR_CONFIG_LRO = 50, 3377 3378 /* 3379 * 8 bit unsigned value to globally enable/disable scan 3380 * 1 - Enable, 0 - Disable. 3381 */ 3382 QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51, 3383 3384 /* 8-bit unsigned value to set the total beacon miss count */ 3385 QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52, 3386 3387 /* 3388 * Unsigned 32-bit value to configure the number of continuous 3389 * Beacon Miss which shall be used by the firmware to penalize 3390 * the RSSI for BTC. 3391 */ 3392 QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS_BTC = 53, 3393 3394 /* 3395 * 8-bit unsigned value to configure the driver and below layers to 3396 * enable/disable all fils features. 3397 * 0-enable, 1-disable 3398 */ 3399 QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54, 3400 3401 /* 16-bit unsigned value to configure the level of WLAN latency 3402 * module. See enum qca_wlan_vendor_attr_config_latency_level. 3403 */ 3404 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL = 55, 3405 3406 /* 3407 * 8-bit unsigned value indicating the driver to use the RSNE as-is from 3408 * the connect interface. Exclusively used for the scenarios where the 3409 * device is used as a test bed device with special functionality and 3410 * not recommended for production. This helps driver to not validate the 3411 * RSNE passed from user space and thus allow arbitrary IE data to be 3412 * used for testing purposes. 3413 * 1-enable, 0-disable. 3414 * Applications set/reset this configuration. If not reset, this 3415 * parameter remains in use until the driver is unloaded. 3416 */ 3417 QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE = 56, 3418 3419 /* 3420 * 8-bit unsigned value to trigger green Tx power saving. 3421 * 1-Enable, 0-Disable 3422 */ 3423 QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57, 3424 3425 /* keep last */ 3426 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST, 3427 QCA_WLAN_VENDOR_ATTR_CONFIG_MAX = 3428 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1, 3429 }; 3430 3431 /** 3432 * enum qca_wlan_vendor_attr_wifi_logger_start - Enum for wifi logger starting 3433 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID: Invalid attribute 3434 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID: Ring ID 3435 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL: Verbose level 3436 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS: Flag 3437 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST: Last value 3438 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX: Max value 3439 */ 3440 enum qca_wlan_vendor_attr_wifi_logger_start { 3441 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0, 3442 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1, 3443 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2, 3444 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3, 3445 /* keep last */ 3446 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST, 3447 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX = 3448 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1, 3449 }; 3450 3451 /* 3452 * enum qca_wlan_vendor_attr_wifi_logger_get_ring_data - Get ring data 3453 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID: Invalid attribute 3454 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID: Ring ID 3455 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST: Last value 3456 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX: Max value 3457 */ 3458 enum qca_wlan_vendor_attr_wifi_logger_get_ring_data { 3459 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID = 0, 3460 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID = 1, 3461 /* keep last */ 3462 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST, 3463 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX = 3464 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST - 1, 3465 }; 3466 3467 #ifdef WLAN_FEATURE_OFFLOAD_PACKETS 3468 /** 3469 * enum wlan_offloaded_packets_control - control commands 3470 * @WLAN_START_OFFLOADED_PACKETS: start offloaded packets 3471 * @WLAN_STOP_OFFLOADED_PACKETS: stop offloaded packets 3472 * 3473 */ 3474 enum wlan_offloaded_packets_control { 3475 WLAN_START_OFFLOADED_PACKETS = 1, 3476 WLAN_STOP_OFFLOADED_PACKETS = 2 3477 }; 3478 3479 /** 3480 * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication 3481 * 3482 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to 3483 * the offloaded data. 3484 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded 3485 * data. 3486 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload 3487 * indication. 3488 */ 3489 enum qca_wlan_vendor_attr_data_offload_ind { 3490 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0, 3491 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION, 3492 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL, 3493 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT, 3494 3495 /* keep last */ 3496 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST, 3497 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX = 3498 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1 3499 }; 3500 3501 /** 3502 * enum qca_wlan_vendor_attr_offloaded_packets - offloaded packets 3503 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID: invalid 3504 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL: control 3505 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID: request id 3506 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA: ip packet data 3507 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR: src mac address 3508 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR: destination mac address 3509 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD: period in milli seconds 3510 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST: after last 3511 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX: max 3512 */ 3513 enum qca_wlan_vendor_attr_offloaded_packets { 3514 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0, 3515 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL, 3516 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID, 3517 3518 /* Packet in hex format */ 3519 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA, 3520 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR, 3521 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR, 3522 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD, 3523 3524 /* keep last */ 3525 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST, 3526 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX = 3527 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1, 3528 }; 3529 #endif 3530 3531 /** 3532 * enum qca_wlan_rssi_monitoring_control - rssi control commands 3533 * @QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID: invalid 3534 * @QCA_WLAN_RSSI_MONITORING_START: rssi monitoring start 3535 * @QCA_WLAN_RSSI_MONITORING_STOP: rssi monitoring stop 3536 */ 3537 enum qca_wlan_rssi_monitoring_control { 3538 QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0, 3539 QCA_WLAN_RSSI_MONITORING_START, 3540 QCA_WLAN_RSSI_MONITORING_STOP, 3541 }; 3542 3543 /** 3544 * enum qca_wlan_vendor_attr_rssi_monitoring - rssi monitoring 3545 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID: Invalid 3546 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL: control 3547 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI: max rssi 3548 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI: min rssi 3549 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID: current bssid 3550 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI: current rssi 3551 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST: after last 3552 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX: max 3553 */ 3554 enum qca_wlan_vendor_attr_rssi_monitoring { 3555 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0, 3556 3557 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL, 3558 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID, 3559 3560 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI, 3561 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI, 3562 3563 /* attributes to be used/received in callback */ 3564 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID, 3565 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI, 3566 3567 /* keep last */ 3568 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST, 3569 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX = 3570 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1, 3571 }; 3572 3573 /** 3574 * enum qca_wlan_vendor_attr_ndp_params - Used by the vendor command 3575 * QCA_NL80211_VENDOR_SUBCMD_NDP. 3576 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID 3577 * @QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD: sub commands values in qca_wlan_ndp_sub_cmd 3578 * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID: 3579 * @QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID: indicats a service info 3580 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL: channel frequency in MHz 3581 * @QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR: Interface Discovery MAC 3582 * address 3583 * @QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR: Interface name on which NDP is being 3584 * created 3585 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY: CONFIG_SECURITY is deprecated, use 3586 * NCS_SK_TYPE/PMK/SCID instead 3587 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS: value for QoS 3588 * @QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO: app info 3589 * @QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID: NDP instance Id 3590 * @QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY: Array of instance Ids 3591 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE: initiator/responder NDP response 3592 * code: accept/reject 3593 * @QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR: NDI MAC address 3594 * @QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE: errors types returned by 3595 * driver 3596 * @QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE: value error values returned by 3597 * driver 3598 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG: Channel setup configuration 3599 * @QCA_WLAN_VENDOR_ATTR_NDP_CSID: Cipher Suite Shared Key Type 3600 * @QCA_WLAN_VENDOR_ATTR_NDP_PMK: PMK_INFO 3601 * @QCA_WLAN_VENDOR_ATTR_NDP_SCID: Security Context Identifier that contains the 3602 * PMKID 3603 * @QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE: passphrase 3604 * @QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME: service name 3605 * @QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON: bitmap indicating schedule 3606 * update: 3607 * BIT_0: NSS Update 3608 * BIT_1: Channel list update 3609 * @QCA_WLAN_VENDOR_ATTR_NDP_NSS: nss 3610 * @QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS: NUMBER NDP CHANNEL 3611 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH: CHANNEL BANDWIDTH: 3612 * 0:20 MHz, 3613 * 1:40 MHz, 3614 * 2:80 MHz, 3615 * 3:160 MHz 3616 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO: Array of channel/band width 3617 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST: id after last valid attribute 3618 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX: max value of this enum type 3619 * @QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR: IPv6 address used by NDP, 16 bytes array 3620 * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT: Unsigned 16-bit value indicating 3621 * transport port used by NDP. 3622 * QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL: Unsigned 8-bit value indicating 3623 * protocol used by NDP and assigned by the Internet Assigned Numbers Authority 3624 * as per: www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml 3625 */ 3626 enum qca_wlan_vendor_attr_ndp_params { 3627 QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0, 3628 QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD = 1, 3629 QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID = 2, 3630 QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID = 3, 3631 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL = 4, 3632 QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR = 5, 3633 QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR = 6, 3634 QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY = 7, 3635 QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS = 8, 3636 QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO = 9, 3637 QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID = 10, 3638 QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY = 11, 3639 QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE = 12, 3640 QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR = 13, 3641 QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE = 14, 3642 QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE = 15, 3643 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG = 16, 3644 QCA_WLAN_VENDOR_ATTR_NDP_CSID = 17, 3645 QCA_WLAN_VENDOR_ATTR_NDP_PMK = 18, 3646 QCA_WLAN_VENDOR_ATTR_NDP_SCID = 19, 3647 QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE = 20, 3648 QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME = 21, 3649 QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON = 22, 3650 QCA_WLAN_VENDOR_ATTR_NDP_NSS = 23, 3651 QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS = 24, 3652 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH = 25, 3653 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO = 26, 3654 QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR = 27, 3655 QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT = 28, 3656 QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29, 3657 3658 /* keep last */ 3659 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST, 3660 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX = 3661 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST - 1, 3662 }; 3663 3664 /** 3665 * enum qca_wlan_ndp_sub_cmd - NDP sub comands types for 3666 * QCA_NL80211_VENDOR_SUBCMD_NDP. 3667 * @QCA_WLAN_VENDOR_ATTR_NDP_INVALID: invalid value 3668 * @QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE: create a ndi 3669 * @QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE: delete a ndi 3670 * @QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST: initiate a ndp session 3671 * @QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE: response for above 3672 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST: respond to ndp session 3673 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE: response for above 3674 * @QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST: initiate a ndp end 3675 * @QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE: response for above 3676 * @QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND: notify the peer about the end request 3677 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND: confirm the ndp session is complete 3678 * @QCA_WLAN_VENDOR_ATTR_NDP_END_IND: indicate the peer about the end request 3679 * being received 3680 * @QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND: indicate the peer of schedule 3681 * update 3682 */ 3683 enum qca_wlan_ndp_sub_cmd { 3684 QCA_WLAN_VENDOR_ATTR_NDP_INVALID = 0, 3685 QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE = 1, 3686 QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE = 2, 3687 QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST = 3, 3688 QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE = 4, 3689 QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST = 5, 3690 QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE = 6, 3691 QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST = 7, 3692 QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE = 8, 3693 QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND = 9, 3694 QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND = 10, 3695 QCA_WLAN_VENDOR_ATTR_NDP_END_IND = 11, 3696 QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND = 12 3697 }; 3698 3699 /** 3700 * qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel 3701 * information. These attributes are sent as part of 3702 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following 3703 * attributes correspond to a single channel. 3704 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS: A bitmask (u16) 3705 * with flags specified in qca_wlan_vendor_channel_prop_flags_ext. 3706 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT: A bitmask (u16) 3707 * with flags specified in qca_wlan_vendor_channel_prop_flags_ext. 3708 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ: frequency 3709 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER: maximum 3710 * regulatory transmission power 3711 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER: maximum 3712 * transmission power 3713 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER: minimum 3714 * transmission power 3715 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID: regulatory 3716 * class id 3717 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN: maximum 3718 * antenna gain in dbm 3719 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0: vht segment 0 3720 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1: vht segment 1 3721 * 3722 */ 3723 enum qca_wlan_vendor_external_acs_event_chan_info_attr { 3724 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0, 3725 3726 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1, 3727 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2, 3728 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3, 3729 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4, 3730 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5, 3731 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6, 3732 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7, 3733 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8, 3734 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9, 3735 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10, 3736 /* 3737 * A bitmask (u32) with flags specified in 3738 * enum qca_wlan_vendor_channel_prop_flags_2. 3739 */ 3740 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11, 3741 3742 /* keep last */ 3743 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST, 3744 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX = 3745 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1, 3746 }; 3747 3748 /** 3749 * enum qca_wlan_vendor_attr_start_acs_config: attribute to vendor sub-command 3750 * QCA_NL80211_VENDOR_SUBCMD_START_ACS. This will be triggered by host 3751 * driver. 3752 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON: This reason refers to 3753 * qca_wlan_vendor_acs_select_reason. This helps acs module to understand why 3754 * ACS need to be started 3755 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED: Does 3756 * driver supports spectral scanning or not 3757 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED: Is 11ac is 3758 * offloaded to firmware. 3759 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT: Does driver 3760 * provides additional channel capability as part of scan operation. 3761 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP:Flag attribute to indicate 3762 * interface status is UP 3763 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE: Operating mode of 3764 * interface. It takes one of nl80211_iftype values. 3765 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH: This is the upper bound 3766 * of chan width. ACS logic should try to get a channel with specified width 3767 * if not found then look for lower values. 3768 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND: nl80211_bands 3769 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE: PHY/HW mode such as 3770 * a/b/g/n/ac. 3771 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST: Supported frequency list 3772 * among which ACS should choose best frequency. 3773 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL:Preferred Chan List by the 3774 * driver which will have <channel(u8), weight(u8)> format as array of 3775 * nested values. 3776 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO: Array of nested attribute 3777 * for each channel. It takes attr as defined in 3778 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY:External ACS policy such as 3779 * PCL mandatory, PCL preferred, etc.It uses values defined in enum 3780 * qca_wlan_vendor_attr_external_acs_policy. 3781 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO: Reference RF 3782 * Operating Parameter (RROP) availability information (u16). It uses values 3783 * defined in enum qca_wlan_vendor_attr_rropavail_info. 3784 */ 3785 enum qca_wlan_vendor_attr_external_acs_event { 3786 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0, 3787 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1, 3788 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2, 3789 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3, 3790 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4, 3791 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5, 3792 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6, 3793 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7, 3794 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8, 3795 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9, 3796 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10, 3797 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11, 3798 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12, 3799 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13, 3800 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14, 3801 3802 /* keep last */ 3803 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST, 3804 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX = 3805 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1, 3806 }; 3807 3808 enum qca_iface_type { 3809 QCA_IFACE_TYPE_STA, 3810 QCA_IFACE_TYPE_AP, 3811 QCA_IFACE_TYPE_P2P_CLIENT, 3812 QCA_IFACE_TYPE_P2P_GO, 3813 QCA_IFACE_TYPE_IBSS, 3814 QCA_IFACE_TYPE_TDLS, 3815 }; 3816 3817 /** 3818 * enum qca_wlan_vendor_attr_pcl_config: attribute to vendor sub-command 3819 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL. 3820 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_INVALID: invalid value 3821 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_CHANNEL: pcl channel number 3822 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_WEIGHT: pcl channel weight 3823 */ 3824 enum qca_wlan_vendor_attr_pcl_config { 3825 QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0, 3826 QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1, 3827 QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2, 3828 }; 3829 3830 enum qca_set_band { 3831 QCA_SETBAND_AUTO, 3832 QCA_SETBAND_5G, 3833 QCA_SETBAND_2G, 3834 }; 3835 3836 /** 3837 * enum set_reset_packet_filter - set packet filter control commands 3838 * @QCA_WLAN_SET_PACKET_FILTER: Set Packet Filter 3839 * @QCA_WLAN_GET_PACKET_FILTER: Get Packet filter 3840 * @QCA_WLAN_WRITE_PACKET_FILTER: Write packet filter program/data 3841 * @QCA_WLAN_READ_PACKET_FILTER: Read packet filter program/data 3842 * @QCA_WLAN_ENABLE_PACKET_FILTER: Enable APF interpreter 3843 * @QCA_WLAN_DISABLE_PACKET_FILTER: Disable APF interpreter 3844 */ 3845 enum set_reset_packet_filter { 3846 QCA_WLAN_SET_PACKET_FILTER = 1, 3847 QCA_WLAN_GET_PACKET_FILTER = 2, 3848 QCA_WLAN_WRITE_PACKET_FILTER = 3, 3849 QCA_WLAN_READ_PACKET_FILTER = 4, 3850 QCA_WLAN_ENABLE_PACKET_FILTER = 5, 3851 QCA_WLAN_DISABLE_PACKET_FILTER = 6, 3852 }; 3853 3854 /** 3855 * enum qca_wlan_vendor_attr_packet_filter - APF control commands 3856 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID: Invalid 3857 * @QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER: Filter ID 3858 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION: Filter Version 3859 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE: Total Length 3860 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET: Current offset 3861 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM: length of APF instructions 3862 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH: length of the program 3863 * section in packet filter buffer 3864 */ 3865 enum qca_wlan_vendor_attr_packet_filter { 3866 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0, 3867 QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER, 3868 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION, 3869 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID, 3870 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE, 3871 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET, 3872 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM, 3873 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH, 3874 3875 /* keep last */ 3876 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST, 3877 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX = 3878 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1, 3879 }; 3880 3881 /** 3882 * enum qca_wlan_vendor_attr_wake_stats - wake lock stats 3883 * @QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID: invalid 3884 * @QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE: 3885 * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR: 3886 * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ: 3887 * @QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE: 3888 * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR: 3889 * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ: 3890 * @QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE: 3891 * total rx wakeup count 3892 * @QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT: 3893 * Total rx unicast packet which woke up host 3894 * @QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT: 3895 * Total rx multicast packet which woke up host 3896 * @QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT: 3897 * Total rx broadcast packet which woke up host 3898 * @QCA_WLAN_VENDOR_ATTR_ICMP_PKT: 3899 * wake icmp packet count 3900 * @QCA_WLAN_VENDOR_ATTR_ICMP6_PKT: 3901 * wake icmp6 packet count 3902 * @QCA_WLAN_VENDOR_ATTR_ICMP6_RA: 3903 * wake icmp6 RA packet count 3904 * @QCA_WLAN_VENDOR_ATTR_ICMP6_NA: 3905 * wake icmp6 NA packet count 3906 * @QCA_WLAN_VENDOR_ATTR_ICMP6_NS: 3907 * wake icmp6 NS packet count 3908 * @QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT: 3909 * Rx wake packet count due to ipv4 multicast 3910 * @QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT: 3911 * Rx wake packet count due to ipv6 multicast 3912 * @QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT: 3913 * Rx wake packet count due to non-ipv4 and non-ipv6 packets 3914 * @QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT: 3915 * wake rssi breach packet count 3916 * @QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT: 3917 * wake low rssi packet count 3918 * @QCA_WLAN_VENDOR_ATTR_GSCAN_CNT: 3919 * wake gscan packet count 3920 * @QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT: 3921 * wake pno complete packet count 3922 * @QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT: 3923 * wake pno match packet count 3924 */ 3925 enum qca_wlan_vendor_attr_wake_stats { 3926 QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID = 0, 3927 QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE, 3928 QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR, 3929 QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ, 3930 QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE, 3931 QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR, 3932 QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ, 3933 QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE, 3934 QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT, 3935 QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT, 3936 QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT, 3937 QCA_WLAN_VENDOR_ATTR_ICMP_PKT, 3938 QCA_WLAN_VENDOR_ATTR_ICMP6_PKT, 3939 QCA_WLAN_VENDOR_ATTR_ICMP6_RA, 3940 QCA_WLAN_VENDOR_ATTR_ICMP6_NA, 3941 QCA_WLAN_VENDOR_ATTR_ICMP6_NS, 3942 QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT, 3943 QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT, 3944 QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT, 3945 QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT, 3946 QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT, 3947 QCA_WLAN_VENDOR_ATTR_GSCAN_CNT, 3948 QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT, 3949 QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT, 3950 /* keep last */ 3951 QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST, 3952 QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX = 3953 QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1, 3954 }; 3955 3956 /** 3957 * enum qca_vendor_element_id - QCA Vendor Specific element types 3958 * 3959 * These values are used to identify QCA Vendor Specific elements. The 3960 * payload of the element starts with the three octet OUI (OUI_QCA) and 3961 * is followed by a single octet type which is defined by this enum. 3962 * 3963 * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list. 3964 * This element can be used to specify preference order for supported 3965 * channels. The channels in this list are in preference order (the first 3966 * one has the highest preference) and are described as a pair of 3967 * (global) Operating Class and Channel Number (each one octet) fields. 3968 * 3969 * This extends the standard P2P functionality by providing option to have 3970 * more than one preferred operating channel. When this element is present, 3971 * it replaces the preference indicated in the Operating Channel attribute. 3972 * For supporting other implementations, the Operating Channel attribute is 3973 * expected to be used with the highest preference channel. Similarly, all 3974 * the channels included in this Preferred channel list element are 3975 * expected to be included in the Channel List attribute. 3976 * 3977 * This vendor element may be included in GO Negotiation Request, P2P 3978 * Invitation Request, and Provision Discovery Request frames. 3979 * 3980 * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element. 3981 * This element can be used for pre-standard publication testing of HE 3982 * before P802.11ax draft assigns the element ID. The payload of this 3983 * vendor specific element is defined by the latest P802.11ax draft. 3984 * Please note that the draft is still work in progress and this element 3985 * payload is subject to change. 3986 * 3987 * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element. 3988 * This element can be used for pre-standard publication testing of HE 3989 * before P802.11ax draft assigns the element ID. The payload of this 3990 * vendor specific element is defined by the latest P802.11ax draft. 3991 * Please note that the draft is still work in progress and this element 3992 * payload is subject to change. 3993 * 3994 * @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set 3995 * element). 3996 * This element can be used for pre-standard publication testing of HE 3997 * before P802.11ax draft assigns the element ID extension. The payload of 3998 * this vendor specific element is defined by the latest P802.11ax draft 3999 * (not including the Element ID Extension field). Please note that the 4000 * draft is still work in progress and this element payload is subject to 4001 * change. 4002 * 4003 * @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element. 4004 * This element can be used for pre-standard publication testing of HE 4005 * before P802.11ax draft assigns the element ID extension. The payload of 4006 * this vendor specific element is defined by the latest P802.11ax draft 4007 * (not including the Element ID Extension field). Please note that the 4008 * draft is still work in progress and this element payload is subject to 4009 * change. 4010 * 4011 * @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element. 4012 * This element can be used for pre-standard publication testing of HE 4013 * before P802.11ax draft assigns the element ID extension. The payload of 4014 * this vendor specific element is defined by the latest P802.11ax draft 4015 * (not including the Element ID Extension field). Please note that the 4016 * draft is still work in progress and this element payload is subject to 4017 * change. 4018 */ 4019 enum qca_vendor_element_id { 4020 QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0, 4021 QCA_VENDOR_ELEM_HE_CAPAB = 1, 4022 QCA_VENDOR_ELEM_HE_OPER = 2, 4023 QCA_VENDOR_ELEM_RAPS = 3, 4024 QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4, 4025 QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5, 4026 }; 4027 4028 /** 4029 * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture 4030 * @QCA_WLAN_VENDOR_ATTR_TSF_INVALID: Invalid attribute value 4031 * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32) 4032 * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value 4033 * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized 4034 * SOC timer value at TSF capture 4035 * @QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST: after last 4036 * @QCA_WLAN_VENDOR_ATTR_TSF_MAX: Max value 4037 */ 4038 enum qca_vendor_attr_tsf_cmd { 4039 QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0, 4040 QCA_WLAN_VENDOR_ATTR_TSF_CMD, 4041 QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE, 4042 QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE, 4043 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST, 4044 QCA_WLAN_VENDOR_ATTR_TSF_MAX = 4045 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1 4046 }; 4047 4048 /** 4049 * enum qca_tsf_operation: TSF driver commands 4050 * @QCA_TSF_CAPTURE: Initiate TSF Capture 4051 * @QCA_TSF_GET: Get TSF capture value 4052 * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value 4053 */ 4054 enum qca_tsf_cmd { 4055 QCA_TSF_CAPTURE, 4056 QCA_TSF_GET, 4057 QCA_TSF_SYNC_GET, 4058 }; 4059 4060 /** 4061 * enum qca_vendor_attr_get_preferred_freq_list - get preferred channel list 4062 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID: invalid value 4063 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE: interface type 4064 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST: preferred frequency list 4065 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST: after last 4066 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX: max 4067 */ 4068 enum qca_vendor_attr_get_preferred_freq_list { 4069 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID, 4070 /* A 32-unsigned value; the interface type/mode for which the preferred 4071 * frequency list is requested (see enum qca_iface_type for possible 4072 * values); used in both south- and north-bound. 4073 */ 4074 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE, 4075 /* An array of 32-unsigned values; values are frequency (MHz); used 4076 * in north-bound only. 4077 */ 4078 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST, 4079 /* keep last */ 4080 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST, 4081 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX = 4082 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1 4083 }; 4084 4085 /** 4086 * enum qca_vendor_attr_probable_oper_channel - channel hint 4087 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID: invalid value 4088 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE: interface type 4089 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ: frequency hint value 4090 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST: last 4091 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX: max 4092 */ 4093 enum qca_vendor_attr_probable_oper_channel { 4094 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID, 4095 /* 32-bit unsigned value; indicates the connection/iface type likely to 4096 * come on this channel (see enum qca_iface_type). 4097 */ 4098 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE, 4099 /* 32-bit unsigned value; the frequency (MHz) of the probable channel */ 4100 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ, 4101 /* keep last */ 4102 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST, 4103 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX = 4104 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1 4105 }; 4106 4107 /** 4108 * enum qca_wlan_vendor_attr_gw_param_config - gateway param config 4109 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID: Invalid 4110 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR: gateway mac addr 4111 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR: ipv4 addr 4112 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR: ipv6 addr 4113 */ 4114 enum qca_wlan_vendor_attr_gw_param_config { 4115 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID = 0, 4116 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR, 4117 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR, 4118 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR, 4119 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST, 4120 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_MAX = 4121 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST - 1, 4122 }; 4123 4124 /** 4125 * enum drv_dbs_capability - DBS capability 4126 * @DRV_DBS_CAPABILITY_DISABLED: DBS disabled 4127 * @DRV_DBS_CAPABILITY_1X1: 1x1 4128 * @DRV_DBS_CAPABILITY_2X2: 2x2 4129 */ 4130 enum drv_dbs_capability { 4131 DRV_DBS_CAPABILITY_DISABLED, /* not supported or disabled */ 4132 DRV_DBS_CAPABILITY_1X1, 4133 DRV_DBS_CAPABILITY_2X2, 4134 }; 4135 4136 /** 4137 * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease 4138 * 4139 * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB. 4140 */ 4141 enum qca_vendor_attr_txpower_decr_db { 4142 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, 4143 /* 4144 * 8-bit unsigned value to indicate the reduction of TX power in dB for 4145 * a virtual interface. 4146 */ 4147 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, 4148 /* keep last */ 4149 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, 4150 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX = 4151 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1 4152 }; 4153 4154 /** 4155 * enum qca_vendor_attr_ota_test - Enable OTA test 4156 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID: invalid value 4157 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable OTA test 4158 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST: after last 4159 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX: max 4160 */ 4161 enum qca_vendor_attr_ota_test { 4162 QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID, 4163 /* 8-bit unsigned value to indicate if OTA test is enabled */ 4164 QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE, 4165 /* keep last */ 4166 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST, 4167 QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX = 4168 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1 4169 }; 4170 4171 /** enum qca_vendor_attr_txpower_scale - vendor sub commands index 4172 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID: invalid value 4173 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value 4174 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST: last value 4175 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX: max value 4176 */ 4177 enum qca_vendor_attr_txpower_scale { 4178 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID, 4179 /* 8-bit unsigned value to indicate the scaling of tx power */ 4180 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE, 4181 /* keep last */ 4182 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST, 4183 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX = 4184 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1 4185 }; 4186 4187 /** 4188 * enum qca_vendor_attr_txpower_scale_decr_db - vendor sub commands index 4189 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID: invalid value 4190 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB: scaling value 4191 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST: last value 4192 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX: max value 4193 */ 4194 enum qca_vendor_attr_txpower_scale_decr_db { 4195 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID, 4196 /* 8-bit unsigned value to indicate the scaling of tx power */ 4197 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB, 4198 /* keep last */ 4199 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST, 4200 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX = 4201 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST - 1 4202 }; 4203 4204 /** 4205 * enum dfs_mode - state of DFS mode 4206 * @DFS_MODE_NONE: DFS mode attribute is none 4207 * @DFS_MODE_ENABLE: DFS mode is enabled 4208 * @DFS_MODE_DISABLE: DFS mode is disabled 4209 * @DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in scanning 4210 */ 4211 enum dfs_mode { 4212 DFS_MODE_NONE, 4213 DFS_MODE_ENABLE, 4214 DFS_MODE_DISABLE, 4215 DFS_MODE_DEPRIORITIZE 4216 }; 4217 4218 /** 4219 * enum qca_wlan_vendor_attr_acs_config - Config params for ACS 4220 * @QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID: Invalid 4221 * @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Dfs mode for ACS 4222 * QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: channel_hint for ACS 4223 * QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST: after_last 4224 * QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX: max attribute 4225 */ 4226 enum qca_wlan_vendor_attr_acs_config { 4227 QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0, 4228 QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE, 4229 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT, 4230 4231 QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST, 4232 QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX = 4233 QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1, 4234 4235 }; 4236 4237 /** 4238 * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability 4239 */ 4240 enum qca_wlan_vendor_attr_get_hw_capability { 4241 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID, 4242 /* 4243 * Antenna isolation 4244 * An attribute used in the response. 4245 * The content of this attribute is encoded in a byte array. Each byte 4246 * value is an antenna isolation value. The array length is the number 4247 * of antennas. 4248 */ 4249 QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION, 4250 /* 4251 * Request HW capability 4252 * An attribute used in the request. 4253 * The content of this attribute is a u32 array for one or more of 4254 * hardware capabilities (attribute IDs) that are being requested. Each 4255 * u32 value has a value from this 4256 * enum qca_wlan_vendor_attr_get_hw_capability 4257 * identifying which capabilities are requested. 4258 */ 4259 QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY, 4260 4261 /* keep last */ 4262 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST, 4263 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX = 4264 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1, 4265 }; 4266 4267 /** 4268 * enum qca_wlan_vendor_attr_sta_connect_roam_policy_config - 4269 * config params for sta roam policy 4270 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID: Invalid 4271 * @QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE: If sta should skip Dfs channels 4272 * @QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL: 4273 * If sta should skip unsafe channels or not in scanning 4274 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_LAST: 4275 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX: max attribute 4276 */ 4277 enum qca_wlan_vendor_attr_sta_connect_roam_policy_config { 4278 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID = 0, 4279 QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE, 4280 QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL, 4281 4282 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST, 4283 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX = 4284 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST - 1, 4285 }; 4286 4287 /* Attributes for FTM commands and events */ 4288 4289 /** 4290 * enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities 4291 * 4292 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See 4293 * enum qca_wlan_vendor_attr_loc_capa_flags. 4294 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number 4295 * of measurement sessions that can run concurrently. 4296 * Default is one session (no session concurrency). 4297 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique 4298 * peers that are supported in running sessions. For example, 4299 * if the value is 8 and maximum number of sessions is 2, you can 4300 * have one session with 8 unique peers, or 2 sessions with 4 unique 4301 * peers each, and so on. 4302 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number 4303 * of bursts per peer, as an exponent (2^value). Default is 0, 4304 * meaning no multi-burst support. 4305 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number 4306 * of measurement exchanges allowed in a single burst. 4307 * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement 4308 * types. A bit mask (unsigned 32 bit value), each bit corresponds 4309 * to an AOA type as defined by enum qca_vendor_attr_aoa_type. 4310 */ 4311 enum qca_wlan_vendor_attr_loc_capa { 4312 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID, 4313 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS, 4314 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS, 4315 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS, 4316 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP, 4317 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST, 4318 QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES, 4319 /* keep last */ 4320 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST, 4321 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX = 4322 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1, 4323 }; 4324 4325 /** 4326 * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags 4327 * 4328 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver 4329 * can be configured as an FTM responder (for example, an AP that 4330 * services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 4331 * will be supported if set. 4332 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver 4333 * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION 4334 * will be supported if set. 4335 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder 4336 * supports immediate (ASAP) response. 4337 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone 4338 * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS. 4339 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports 4340 * requesting AOA measurements as part of an FTM session. 4341 */ 4342 enum qca_wlan_vendor_attr_loc_capa_flags { 4343 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0, 4344 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1, 4345 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2, 4346 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3, 4347 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4, 4348 }; 4349 4350 /** 4351 * enum qca_wlan_vendor_attr_sap_config - config params for sap configuration 4352 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID: invalid 4353 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Channel on which SAP should start 4354 * @QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST: List of frequencies on 4355 * which AP is expected to operate. This is irrespective of ACS configuration. 4356 * This list is a priority based one and is looked for before the AP is created 4357 * to ensure the best concurrency sessions (avoid MCC and use DBS/SCC) co-exist 4358 * in the system. 4359 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST: after last 4360 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX: max attribute 4361 */ 4362 enum qca_wlan_vendor_attr_sap_config { 4363 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0, 4364 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL, 4365 QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2, 4366 /* keep last */ 4367 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST, 4368 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX = 4369 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1, 4370 }; 4371 4372 /** 4373 * enum qca_wlan_vendor_attr_ftm_peer_info: Information about 4374 * a single peer in a measurement session. 4375 * 4376 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer. 4377 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related 4378 * to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags. 4379 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of 4380 * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0 4381 * 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for 4382 * list of supported attributes. 4383 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for 4384 * secure measurement. 4385 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA 4386 * measurement every <value> bursts. If 0 or not specified, 4387 * AOA measurements will be disabled for this peer. 4388 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where 4389 * the measurement frames are exchanged. Optional; if not 4390 * specified, try to locate the peer in the kernel scan 4391 * results cache and use frequency from there. 4392 */ 4393 enum qca_wlan_vendor_attr_ftm_peer_info { 4394 QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID, 4395 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR, 4396 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS, 4397 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS, 4398 QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID, 4399 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD, 4400 QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ, 4401 /* keep last */ 4402 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST, 4403 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX = 4404 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1, 4405 }; 4406 4407 /** 4408 * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags, 4409 * per-peer 4410 * 4411 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request 4412 * immediate (ASAP) response from peer. 4413 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request 4414 * LCI report from peer. The LCI report includes the absolute 4415 * location of the peer in "official" coordinates (similar to GPS). 4416 * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information. 4417 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request 4418 * Location civic report from peer. The LCR includes the location 4419 * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0, 4420 * 11.24.6.7 for more information. 4421 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set, 4422 * request a secure measurement. 4423 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided. 4424 */ 4425 enum qca_wlan_vendor_attr_ftm_peer_meas_flags { 4426 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0, 4427 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1, 4428 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2, 4429 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3, 4430 }; 4431 4432 /** 4433 * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters 4434 * 4435 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements 4436 * to perform in a single burst. 4437 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to 4438 * perform, specified as an exponent (2^value). 4439 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst 4440 * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. 4441 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts, 4442 * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must 4443 * be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION. 4444 */ 4445 enum qca_wlan_vendor_attr_ftm_meas_param { 4446 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID, 4447 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST, 4448 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP, 4449 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION, 4450 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD, 4451 /* keep last */ 4452 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST, 4453 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX = 4454 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1, 4455 }; 4456 4457 /** 4458 * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results 4459 * 4460 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported 4461 * peer. 4462 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement 4463 * request for this peer. 4464 * See enum qca_wlan_vendor_attr_ftm_peer_result_status. 4465 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related 4466 * to measurement results for this peer. 4467 * See enum qca_wlan_vendor_attr_ftm_peer_result_flags. 4468 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when 4469 * request failed and peer requested not to send an additional request 4470 * for this number of seconds. 4471 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received 4472 * from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 4473 * 9.4.2.22.10. 4474 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when 4475 * received from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 4476 * 9.4.2.22.13. 4477 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer 4478 * overridden some measurement request parameters. See 4479 * enum qca_wlan_vendor_attr_ftm_meas_param. 4480 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement 4481 * for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. 4482 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement 4483 * results. Each entry is a nested attribute defined 4484 * by enum qca_wlan_vendor_attr_ftm_meas. 4485 */ 4486 enum qca_wlan_vendor_attr_ftm_peer_result { 4487 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID, 4488 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR, 4489 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS, 4490 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS, 4491 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS, 4492 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI, 4493 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR, 4494 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS, 4495 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS, 4496 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS, 4497 /* keep last */ 4498 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST, 4499 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX = 4500 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1, 4501 }; 4502 4503 /** 4504 * enum qca_wlan_vendor_attr_ftm_peer_result_status 4505 * 4506 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results 4507 * will be provided. Peer may have overridden some measurement parameters, 4508 * in which case overridden parameters will be report by 4509 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute. 4510 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable 4511 * of performing the measurement request. No more results will be sent 4512 * for this peer in this session. 4513 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request 4514 * failed, and requested not to send an additional request for number 4515 * of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS 4516 * attribute. 4517 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation 4518 * failed. Request was not sent over the air. 4519 */ 4520 enum qca_wlan_vendor_attr_ftm_peer_result_status { 4521 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK, 4522 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE, 4523 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED, 4524 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID, 4525 }; 4526 4527 /** 4528 * enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags 4529 * for measurement result, per-peer 4530 * 4531 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set, 4532 * measurement completed for this peer. No more results will be reported 4533 * for this peer in this session. 4534 */ 4535 enum qca_wlan_vendor_attr_ftm_peer_result_flags { 4536 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0, 4537 }; 4538 4539 /** 4540 * enum qca_vendor_attr_loc_session_status: Session completion status code 4541 * 4542 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed 4543 * successfully. 4544 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted 4545 * by request. 4546 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request 4547 * was invalid and was not started. 4548 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error 4549 * and did not complete normally (for example out of resources). 4550 */ 4551 enum qca_vendor_attr_loc_session_status { 4552 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK, 4553 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED, 4554 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID, 4555 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED, 4556 }; 4557 4558 /** 4559 * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data 4560 * 4561 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as 4562 * recorded by responder, in picoseconds. 4563 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4564 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at 4565 * initiator, in picoseconds. 4566 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4567 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by 4568 * initiator, in picoseconds. 4569 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4570 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at 4571 * responder, in picoseconds. 4572 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4573 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded 4574 * during this measurement exchange. Optional and will be provided if 4575 * the hardware can measure it. 4576 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by 4577 * responder. Not always provided. 4578 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4579 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by 4580 * responder. Not always provided. 4581 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4582 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by 4583 * initiator. Not always provided. 4584 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4585 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by 4586 * initiator. Not always provided. 4587 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4588 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding. 4589 */ 4590 enum qca_wlan_vendor_attr_ftm_meas { 4591 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID, 4592 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1, 4593 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2, 4594 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3, 4595 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4, 4596 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI, 4597 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR, 4598 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR, 4599 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR, 4600 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR, 4601 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD, 4602 /* keep last */ 4603 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST, 4604 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX = 4605 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1, 4606 }; 4607 4608 /** 4609 * enum qca_wlan_vendor_attr_p2p_listen_offload - vendor sub commands index 4610 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID: invalid value 4611 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL: 4612 * A 32-bit unsigned value; the P2P listen frequency (MHz); must be one 4613 * of the social channels. 4614 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD: listen offload period 4615 * A 32-bit unsigned value; the P2P listen offload period (ms). 4616 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL: 4617 * A 32-bit unsigned value; the P2P listen interval duration (ms). 4618 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT: 4619 * A 32-bit unsigned value; number of interval times the Firmware needs 4620 * to run the offloaded P2P listen operation before it stops. 4621 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES: device types 4622 * An array of unsigned 8-bit characters; vendor information elements. 4623 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE: vendor IEs 4624 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG: control flag for FW 4625 * A 32-bit unsigned value; a control flag to indicate whether listen 4626 * results need to be flushed to wpa_supplicant. 4627 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON: offload stop reason 4628 * A 8-bit unsigned value; reason code for P2P listen offload stop 4629 * event. 4630 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST: last value 4631 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX: max value 4632 */ 4633 enum qca_wlan_vendor_attr_p2p_listen_offload { 4634 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0, 4635 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL, 4636 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD, 4637 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL, 4638 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT, 4639 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES, 4640 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE, 4641 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG, 4642 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON, 4643 /* keep last */ 4644 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST, 4645 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX = 4646 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1 4647 }; 4648 4649 /** 4650 * enum qca_wlan_vendor_drv_info - WLAN driver info 4651 * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID: Invalid 4652 * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE: Maximum Message size info 4653 * between Firmware & Host. 4654 */ 4655 enum qca_wlan_vendor_drv_info { 4656 QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0, 4657 QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE, 4658 4659 /* keep last */ 4660 QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST, 4661 QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX = 4662 QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1, 4663 }; 4664 4665 /** 4666 * enum qca_wlan_vendor_attr_aoa_type - AOA measurement type 4667 * 4668 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest 4669 * CIR (channel impulse response) path for each antenna. 4670 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude 4671 * of the strongest CIR path for each antenna. 4672 */ 4673 enum qca_wlan_vendor_attr_aoa_type { 4674 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE, 4675 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP, 4676 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX 4677 }; 4678 4679 /** 4680 * enum qca_wlan_vendor_attr_encryption_test - Attributes to 4681 * validate encryption engine 4682 * 4683 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute. 4684 * This will be included if the request is for decryption; if not included, 4685 * the request is treated as a request for encryption by default. 4686 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value 4687 * indicating the key cipher suite. Takes same values as 4688 * NL80211_ATTR_KEY_CIPHER. 4689 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value 4690 * Key Id to be used for encryption 4691 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values. 4692 * Key (TK) to be used for encryption/decryption 4693 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values. 4694 * Packet number to be specified for encryption/decryption 4695 * 6 bytes for TKIP/CCMP/GCMP. 4696 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values 4697 * representing the 802.11 packet (header + payload + FCS) that 4698 * needs to be encrypted/decrypted. 4699 * Encrypted/decrypted response from the driver will also be sent 4700 * to userspace with the same attribute. 4701 */ 4702 enum qca_wlan_vendor_attr_encryption_test { 4703 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0, 4704 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION, 4705 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER, 4706 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID, 4707 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK, 4708 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN, 4709 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA, 4710 4711 /* keep last */ 4712 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST, 4713 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX = 4714 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1 4715 }; 4716 4717 /** 4718 * enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of 4719 * sector for DMG RF sector operations. 4720 * 4721 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector 4722 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector 4723 */ 4724 enum qca_wlan_vendor_attr_dmg_rf_sector_type { 4725 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX, 4726 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX, 4727 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX 4728 }; 4729 4730 /** 4731 * BRP antenna limit mode 4732 * 4733 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force 4734 * antenna limit, BRP will be performed as usual. 4735 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE: Define maximal 4736 * antennas limit. the hardware may use less antennas than the 4737 * maximum limit. 4738 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE: The hardware will 4739 * use exactly the specified number of antennas for BRP. 4740 */ 4741 enum qca_wlan_vendor_attr_brp_ant_limit_mode { 4742 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE, 4743 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE, 4744 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE, 4745 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_MAX 4746 }; 4747 4748 /** 4749 * enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for 4750 * DMG RF sector configuration for a single RF module. 4751 * The values are defined in a compact way which closely matches 4752 * the way it is stored in HW registers. 4753 * The configuration provides values for 32 antennas and 8 distribution 4754 * amplifiers, and together describes the characteristics of the RF 4755 * sector - such as a beam in some direction with some gain. 4756 * 4757 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index 4758 * of RF module for this configuration. 4759 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge 4760 * amplifier gain index. Unsigned 32 bit number containing 4761 * bits for all 32 antennas. 4762 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge 4763 * amplifier gain index. Unsigned 32 bit number containing 4764 * bits for all 32 antennas. 4765 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge 4766 * amplifier gain index. Unsigned 32 bit number containing 4767 * bits for all 32 antennas. 4768 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values 4769 * for first 16 antennas, 2 bits per antenna. 4770 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values 4771 * for last 16 antennas, 2 bits per antenna. 4772 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains 4773 * DTYPE values (3 bits) for each distribution amplifier, followed 4774 * by X16 switch bits for each distribution amplifier. There are 4775 * total of 8 distribution amplifiers. 4776 */ 4777 enum qca_wlan_vendor_attr_dmg_rf_sector_cfg { 4778 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0, 4779 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1, 4780 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2, 4781 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3, 4782 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4, 4783 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5, 4784 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6, 4785 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7, 4786 4787 /* keep last */ 4788 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST, 4789 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX = 4790 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1 4791 }; 4792 4793 /** 4794 * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for 4795 * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS configuration to the host driver. 4796 * 4797 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger 4798 * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode 4799 * represents the different TDLS trigger modes. 4800 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within 4801 * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number 4802 * of packets shall meet the criteria for implicit TDLS setup. 4803 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx 4804 * packets within a duration. 4805 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD to initiate 4806 * a TDLS setup. 4807 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to inititate 4808 * a TDLS Discovery to the Peer. 4809 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of 4810 * discovery attempts to know the TDLS capability of the peer. A peer is 4811 * marked as TDLS not capable if there is no response for all the attempts. 4812 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32) 4813 * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD 4814 * number of TX / RX frames meet the criteria for TDLS teardown. 4815 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number 4816 * (u32) of Tx/Rx packets within a duration 4817 * CA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link 4818 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold 4819 * corresponding to the RSSI of the peer below which a TDLS 4820 * setup is triggered. 4821 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold 4822 * corresponding to the RSSI of the peer above which 4823 * a TDLS teardown is triggered. 4824 */ 4825 enum qca_wlan_vendor_attr_tdls_configuration { 4826 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0, 4827 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1, 4828 4829 /* Attributes configuring the TDLS Implicit Trigger */ 4830 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2, 4831 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3, 4832 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4, 4833 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5, 4834 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6, 4835 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7, 4836 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8, 4837 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9, 4838 4839 /* keep last */ 4840 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST, 4841 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX = 4842 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1 4843 }; 4844 4845 /** 4846 * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in 4847 * the driver. 4848 * 4849 * The following are the different values for 4850 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE. 4851 * 4852 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to 4853 * initiate/teardown the TDLS connection to a respective peer comes 4854 * from the user space. wpa_supplicant provides the commands 4855 * TDLS_SETUP, TDLS_TEARDOWN, TDLS_DISCOVER to do this. 4856 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS 4857 * setup/teardown to the eligible peer once the configured criteria 4858 * (such as TX/RX threshold, RSSI) is met. The attributes 4859 * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to 4860 * the different configuration criteria for the TDLS trigger from the 4861 * host driver. 4862 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger 4863 * the TDLS setup / teardown through the implicit mode, only to the 4864 * configured MAC addresses(wpa_supplicant, with tdls_external_control = 1, 4865 * configures the MAC address through TDLS_SETUP/TDLS_TEARDOWN commands). 4866 * External mode works on top of the implicit mode, thus the host Driver 4867 * is expected to be configured in TDLS Implicit mode too to operate in 4868 * External mode. Configuring External mode alone without Implicit 4869 * mode is invalid. 4870 * 4871 * All the above implementations work as expected only when the host driver 4872 * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - 4873 * representing that the TDLS message exchange is not internal to the host 4874 * driver, but depends on wpa_supplicant to do the message exchange. 4875 */ 4876 enum qca_wlan_vendor_tdls_trigger_mode { 4877 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0, 4878 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1, 4879 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2, 4880 }; 4881 4882 /** 4883 * enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits 4884 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0 4885 * that is hard-coded in the Board Data File (BDF). 4886 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1 4887 * that is hard-coded in the Board Data File (BDF). 4888 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2 4889 * that is hard-coded in the Board Data File (BDF). 4890 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3 4891 * that is hard-coded in the Board Data File (BDF). 4892 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4 4893 * that is hard-coded in the Board Data File (BDF). 4894 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any 4895 * source of SAR power limits, thereby disabling the SAR power 4896 * limit feature. 4897 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power 4898 * limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. 4899 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0: Select the SAR power 4900 * limits version 2.0 configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. 4901 * 4902 * This enumerates the valid set of values that may be supplied for 4903 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of 4904 * the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command or in 4905 * the response to an instance of the 4906 * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. 4907 */ 4908 enum qca_vendor_attr_sar_limits_selections { 4909 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0, 4910 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1, 4911 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2, 4912 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3, 4913 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4, 4914 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5, 4915 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6, 4916 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0 = 7, 4917 }; 4918 4919 /** 4920 * enum qca_vendor_attr_sar_limits_spec_modulations - 4921 * SAR limits specification modulation 4922 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK - 4923 * CCK modulation 4924 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM - 4925 * OFDM modulation 4926 * 4927 * This enumerates the valid set of values that may be supplied for 4928 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an 4929 * instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an 4930 * instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor 4931 * command or in the response to an instance of the 4932 * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. 4933 */ 4934 enum qca_vendor_attr_sar_limits_spec_modulations { 4935 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0, 4936 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1, 4937 }; 4938 4939 /** 4940 * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits 4941 * 4942 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to 4943 * select which SAR power limit table should be used. Valid 4944 * values are enumerated in enum 4945 * %qca_vendor_attr_sar_limits_selections. The existing SAR 4946 * power limit selection is unchanged if this attribute is not 4947 * present. 4948 * 4949 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value 4950 * which specifies the number of SAR power limit specifications 4951 * which will follow. 4952 * 4953 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power 4954 * limit specifications. The number of specifications is 4955 * specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each 4956 * specification contains a set of 4957 * QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A 4958 * specification is uniquely identified by the attributes 4959 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND, 4960 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and 4961 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always 4962 * contains as a payload the attribute 4963 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT. 4964 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX. 4965 * Either %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT or 4966 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX is 4967 * needed based upon the value of 4968 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE. 4969 * 4970 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to 4971 * indicate for which band this specification applies. Valid 4972 * values are enumerated in enum %nl80211_band (although not all 4973 * bands may be supported by a given device). If the attribute is 4974 * not supplied then the specification will be applied to all 4975 * supported bands. 4976 * 4977 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value 4978 * to indicate for which antenna chain this specification 4979 * applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the 4980 * attribute is not supplied then the specification will be 4981 * applied to all chains. 4982 * 4983 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32) 4984 * value to indicate for which modulation scheme this 4985 * specification applies. Valid values are enumerated in enum 4986 * %qca_vendor_attr_sar_limits_spec_modulations. If the attribute 4987 * is not supplied then the specification will be applied to all 4988 * modulation schemes. 4989 * 4990 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32) 4991 * value to specify the actual power limit value in units of 0.5 4992 * dBm (i.e., a value of 11 represents 5.5 dBm). 4993 * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is 4994 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER. 4995 * 4996 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX: Required (u32) 4997 * value to indicate SAR V2 indices (0 - 11) to select SAR V2 profiles. 4998 * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is 4999 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0. 5000 * 5001 * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS 5002 * and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS. 5003 */ 5004 enum qca_vendor_attr_sar_limits { 5005 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0, 5006 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1, 5007 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2, 5008 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3, 5009 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4, 5010 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5, 5011 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6, 5012 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7, 5013 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX = 8, 5014 5015 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST, 5016 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX = 5017 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1 5018 }; 5019 5020 /** 5021 * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring 5022 * offload which is an extension for LL_STATS. 5023 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms. 5024 * If MAC counters do not exceed the threshold, FW will report monitored 5025 * link layer counters periodically as this setting. The first report is 5026 * always triggered by this timer. 5027 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99). 5028 * For each MAC layer counter, FW holds two copies. One is the current value. 5029 * The other is the last report. Once a current counter's increment is larger 5030 * than the threshold, FW will indicate that counter to host even if the 5031 * monitoring timer does not expire. 5032 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change 5033 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU 5034 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same 5035 * failure code. 5036 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code 5037 * 1: TX packet discarded 5038 * 2: No ACK 5039 * 3: Postpone 5040 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address 5041 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state 5042 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold. 5043 * Threshold for all monitored parameters. If per counter dedicated threshold 5044 * is not enabled, this threshold will take effect. 5045 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this 5046 * event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0. 5047 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID 5048 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID 5049 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters 5050 * Bit0: TX counter unit in MSDU 5051 * Bit1: TX counter unit in MPDU 5052 * Bit2: TX counter unit in PPDU 5053 * Bit3: TX counter unit in byte 5054 * Bit4: Dropped MSDUs 5055 * Bit5: Dropped Bytes 5056 * Bit6: MPDU retry counter 5057 * Bit7: MPDU failure counter 5058 * Bit8: PPDU failure counter 5059 * Bit9: MPDU aggregation counter 5060 * Bit10: MCS counter for ACKed MPDUs 5061 * Bit11: MCS counter for Failed MPDUs 5062 * Bit12: TX Delay counter 5063 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters 5064 * Bit0: MAC RX counter unit in MPDU 5065 * Bit1: MAC RX counter unit in byte 5066 * Bit2: PHY RX counter unit in PPDU 5067 * Bit3: PHY RX counter unit in byte 5068 * Bit4: Disorder counter 5069 * Bit5: Retry counter 5070 * Bit6: Duplication counter 5071 * Bit7: Discard counter 5072 * Bit8: MPDU aggregation size counter 5073 * Bit9: MCS counter 5074 * Bit10: Peer STA power state change (wake to sleep) counter 5075 * Bit11: Peer STA power save counter, total time in PS mode 5076 * Bit12: Probe request counter 5077 * Bit13: Other management frames counter 5078 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA 5079 * Bit0: Idle time 5080 * Bit1: TX time 5081 * Bit2: time RX in current bss 5082 * Bit3: Out of current bss time 5083 * Bit4: Wireless medium busy time 5084 * Bit5: RX in bad condition time 5085 * Bit6: TX in bad condition time 5086 * Bit7: time wlan card not available 5087 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal 5088 * Bit0: Per channel SNR counter 5089 * Bit1: Per channel noise floor counter 5090 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers 5091 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels 5092 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats 5093 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats 5094 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats 5095 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs 5096 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs 5097 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs 5098 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data 5099 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets 5100 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped 5101 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK 5102 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed 5103 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed 5104 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM: 5105 * aggregation stats buffer length 5106 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats 5107 * buffer for ACKed MPDUs. 5108 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats 5109 * buffer for failed MPDUs. 5110 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE: 5111 * length of delay stats array. 5112 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats 5113 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs 5114 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs 5115 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats 5116 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received 5117 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received 5118 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received 5119 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received 5120 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost 5121 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets 5122 * flagged as retransmissions 5123 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets 5124 * flagged as duplicated 5125 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX 5126 * packets discarded 5127 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation 5128 * stats buffer. 5129 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs 5130 * stats buffer. 5131 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer 5132 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer 5133 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep 5134 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time 5135 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe 5136 * requests received 5137 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt 5138 * frames received 5139 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time 5140 * there is no TX, nor RX, nor interference. 5141 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time 5142 * transmitting packets. 5143 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time 5144 * for receiving. 5145 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time 5146 * interference detected. 5147 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time 5148 * receiving packets with errors. 5149 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time 5150 * TX no-ACK. 5151 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time 5152 * the chip is unable to work in normal conditions. 5153 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time 5154 * receiving packets in current BSS. 5155 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time 5156 * receiving packets not in current BSS. 5157 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas 5158 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL: 5159 * This is a container for per antenna signal stats. 5160 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value 5161 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value 5162 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon 5163 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon 5164 */ 5165 enum qca_wlan_vendor_attr_ll_stats_ext { 5166 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0, 5167 5168 /* Attributes for configurations */ 5169 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD, 5170 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD, 5171 5172 /* Peer STA power state change */ 5173 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG, 5174 5175 /* TX failure event */ 5176 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID, 5177 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU, 5178 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS, 5179 5180 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE, 5181 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS, 5182 5183 /* MAC counters */ 5184 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL, 5185 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE, 5186 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID, 5187 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID, 5188 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP, 5189 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP, 5190 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP, 5191 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP, 5192 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM, 5193 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM, 5194 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS, 5195 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER, 5196 5197 /* Sub-attributes for PEER_AC_TX */ 5198 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU, 5199 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU, 5200 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU, 5201 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES, 5202 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP, 5203 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES, 5204 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY, 5205 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK, 5206 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK, 5207 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM, 5208 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM, 5209 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM, 5210 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR, 5211 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS, 5212 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS, 5213 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE, 5214 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY, 5215 5216 /* Sub-attributes for PEER_AC_RX */ 5217 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU, 5218 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES, 5219 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU, 5220 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES, 5221 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST, 5222 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY, 5223 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP, 5224 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD, 5225 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM, 5226 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM, 5227 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS, 5228 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR, 5229 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES, 5230 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION, 5231 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ, 5232 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT, 5233 5234 /* Sub-attributes for CCA_BSS */ 5235 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME, 5236 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME, 5237 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME, 5238 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY, 5239 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD, 5240 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD, 5241 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL, 5242 5243 /* sub-attribute for BSS_RX_TIME */ 5244 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME, 5245 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME, 5246 5247 /* Sub-attributes for PEER_SIGNAL */ 5248 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM, 5249 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL, 5250 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR, 5251 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF, 5252 5253 /* Sub-attributes for IFACE_BSS */ 5254 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON, 5255 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON, 5256 5257 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST, 5258 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX = 5259 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1 5260 }; 5261 5262 /** 5263 * qca_wlan_vendor_attr_external_acs_channels: attribute to vendor subcmd 5264 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carry a list of channels 5265 * in priority order as decided after acs operation in userspace. 5266 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: One of reason code from 5267 * qca_wlan_vendor_acs_select_reason. 5268 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_COUNT: Number of channels in 5269 * this list 5270 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Array of nested values 5271 * for each channel with following attributes: 5272 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY, 5273 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY, 5274 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0, 5275 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1, 5276 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH 5277 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Primary channel (u8) 5278 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Secondary channel (u8) 5279 * required only for 160 / 80 + 80 5280 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: VHT seg0 channel (u8) 5281 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: VHT seg1 channel (u8) 5282 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH:channel width (u8) 5283 */ 5284 enum qca_wlan_vendor_attr_external_acs_channels { 5285 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0, 5286 5287 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1, 5288 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2, 5289 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3, 5290 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4, 5291 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5, 5292 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6, 5293 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7, 5294 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8, 5295 5296 /* keep last */ 5297 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST, 5298 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX = 5299 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1 5300 }; 5301 5302 /** 5303 * qca_wlan_vendor_acs_select_reason: This represents the different reasons why 5304 * the ACS has to be triggered. These parameters are used by 5305 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and 5306 * QCA_NL80211_VENDOR_SUBCMD_ACS_SET_CHANNELS 5307 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT: Represents the reason that the 5308 * ACS triggered during the AP start 5309 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS: Represents the reason that 5310 * DFS found with current channel 5311 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX: Represents the reason that 5312 * LTE CO-Exist in current band 5313 */ 5314 enum qca_wlan_vendor_acs_select_reason { 5315 QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT, 5316 QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS, 5317 QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX, 5318 }; 5319 5320 /** 5321 * enum qca_wlan_gpio_attr - Parameters for GPIO configuration 5322 */ 5323 enum qca_wlan_gpio_attr { 5324 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0, 5325 /* Unsigned 32-bit attribute for GPIO command */ 5326 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND, 5327 /* Unsigned 32-bit attribute for GPIO PIN number to configure */ 5328 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM, 5329 /* Unsigned 32-bit attribute for GPIO value to configure */ 5330 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE, 5331 /* Unsigned 32-bit attribute for GPIO pull type */ 5332 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE, 5333 /* Unsigned 32-bit attribute for GPIO interrupt mode */ 5334 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE, 5335 5336 /* keep last */ 5337 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST, 5338 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX = 5339 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1, 5340 }; 5341 5342 /** 5343 * qca_wlan_set_qdepth_thresh_attr - Parameters for setting 5344 * MSDUQ depth threshold per peer per tid in the target 5345 * 5346 * Associated Vendor Command: 5347 * QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH 5348 */ 5349 enum qca_wlan_set_qdepth_thresh_attr { 5350 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_INVALID = 0, 5351 /* 6-byte MAC address */ 5352 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAC_ADDR, 5353 /* Unsigned 32-bit attribute for holding the TID */ 5354 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_TID, 5355 /* Unsigned 32-bit attribute for holding the update mask 5356 * bit 0 - Update high priority msdu qdepth threshold 5357 * bit 1 - Update low priority msdu qdepth threshold 5358 * bit 2 - Update UDP msdu qdepth threshold 5359 * bit 3 - Update Non UDP msdu qdepth threshold 5360 * rest of bits are reserved 5361 */ 5362 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_UPDATE_MASK, 5363 /* Unsigned 32-bit attribute for holding the threshold value */ 5364 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_VALUE, 5365 5366 /* keep last */ 5367 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST, 5368 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAX = 5369 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST - 1, 5370 }; 5371 5372 /** 5373 * qca_wlan_vendor_attr_external_acs_policy: Attribute values for 5374 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to the vendor subcmd 5375 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This represents the 5376 * external ACS policies to select the channels w.r.t. the PCL weights. 5377 * (QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL represents the channels and 5378 * their PCL weights.) 5379 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY: Mandatory to 5380 * select a channel with non-zero PCL weight. 5381 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED: Prefer a 5382 * channel with non-zero PCL weight. 5383 * 5384 */ 5385 enum qca_wlan_vendor_attr_external_acs_policy { 5386 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED, 5387 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY, 5388 }; 5389 5390 /** 5391 * enum qca_wlan_vendor_attr_spectral_scan - Spectral scan config parameters 5392 */ 5393 enum qca_wlan_vendor_attr_spectral_scan { 5394 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INVALID = 0, 5395 /* 5396 * Number of times the chip enters spectral scan mode before 5397 * deactivating spectral scans. When set to 0, chip will enter spectral 5398 * scan mode continuously. u32 attribute. 5399 */ 5400 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_COUNT = 1, 5401 /* 5402 * Spectral scan period. Period increment resolution is 256*Tclk, 5403 * where Tclk = 1/44 MHz (Gmode), 1/40 MHz (Amode). u32 attribute. 5404 */ 5405 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_PERIOD = 2, 5406 /* Spectral scan priority. u32 attribute. */ 5407 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PRIORITY = 3, 5408 /* Number of FFT data points to compute. u32 attribute. */ 5409 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_SIZE = 4, 5410 /* 5411 * Enable targeted gain change before starting the spectral scan FFT. 5412 * u32 attribute. 5413 */ 5414 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_GC_ENA = 5, 5415 /* Restart a queued spectral scan. u32 attribute. */ 5416 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RESTART_ENA = 6, 5417 /* 5418 * Noise floor reference number for the calculation of bin power. 5419 * u32 attribute. 5420 */ 5421 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NOISE_FLOOR_REF = 7, 5422 /* 5423 * Disallow spectral scan triggers after TX/RX packets by setting 5424 * this delay value to roughly SIFS time period or greater. 5425 * u32 attribute. 5426 */ 5427 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INIT_DELAY = 8, 5428 /* 5429 * Number of strong bins (inclusive) per sub-channel, below 5430 * which a signal is declared a narrow band tone. u32 attribute. 5431 */ 5432 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NB_TONE_THR = 9, 5433 /* 5434 * Specify the threshold over which a bin is declared strong (for 5435 * scan bandwidth analysis). u32 attribute. 5436 */ 5437 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_STR_BIN_THR = 10, 5438 /* Spectral scan report mode. u32 attribute. */ 5439 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_WB_RPT_MODE = 11, 5440 /* 5441 * RSSI report mode, if the ADC RSSI is below 5442 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR, 5443 * then FFTs will not trigger, but timestamps and summaries get 5444 * reported. u32 attribute. 5445 */ 5446 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_RPT_MODE = 12, 5447 /* 5448 * ADC RSSI must be greater than or equal to this threshold (signed dB) 5449 * to ensure spectral scan reporting with normal error code. 5450 * u32 attribute. 5451 */ 5452 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR = 13, 5453 /* 5454 * Format of frequency bin magnitude for spectral scan triggered FFTs: 5455 * 0: linear magnitude, 1: log magnitude (20*log10(lin_mag)). 5456 * u32 attribute. 5457 */ 5458 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PWR_FORMAT = 14, 5459 /* 5460 * Format of FFT report to software for spectral scan triggered FFTs. 5461 * 0: No FFT report (only spectral scan summary report) 5462 * 1: 2-dword summary of metrics for each completed FFT + spectral scan 5463 * report 5464 * 2: 2-dword summary of metrics for each completed FFT + 1x-oversampled 5465 * bins (in-band) per FFT + spectral scan summary report 5466 * 3: 2-dword summary of metrics for each completed FFT + 2x-oversampled 5467 * bins (all) per FFT + spectral scan summary report 5468 * u32 attribute. 5469 */ 5470 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RPT_MODE = 15, 5471 /* 5472 * Number of LSBs to shift out in order to scale the FFT bins. 5473 * u32 attribute. 5474 */ 5475 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BIN_SCALE = 16, 5476 /* 5477 * Set to 1 (with spectral_scan_pwr_format=1), to report bin magnitudes 5478 * in dBm power. u32 attribute. 5479 */ 5480 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DBM_ADJ = 17, 5481 /* 5482 * Per chain enable mask to select input ADC for search FFT. 5483 * u32 attribute. 5484 */ 5485 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_CHN_MASK = 18, 5486 /* 5487 * An unsigned 64-bit integer provided by host driver to identify the 5488 * spectral scan request. This attribute is included in the scan 5489 * response message for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START 5490 * and used as an attribute in 5491 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP to identify the 5492 * specific scan to be stopped. 5493 */ 5494 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19, 5495 /* Skip interval for FFT reports. u32 attribute */ 5496 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20, 5497 /* Set to report only one set of FFT results. 5498 * u32 attribute. 5499 */ 5500 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21, 5501 /* Debug level for spectral module in driver. 5502 * 0 : Verbosity level 0 5503 * 1 : Verbosity level 1 5504 * 2 : Verbosity level 2 5505 * 3 : Matched filterID display 5506 * 4 : One time dump of FFT report 5507 * u32 attribute. 5508 */ 5509 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22, 5510 /* Type of spectral scan request. u32 attribute. 5511 * It uses values defined in enum 5512 * qca_wlan_vendor_attr_spectral_scan_request_type. 5513 */ 5514 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23, 5515 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST, 5516 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX = 5517 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1, 5518 }; 5519 5520 /** 5521 * enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command 5522 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS. 5523 */ 5524 enum qca_wlan_vendor_attr_spectral_diag_stats { 5525 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0, 5526 /* Number of spectral TLV signature mismatches. 5527 * u64 attribute. 5528 */ 5529 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1, 5530 /* Number of spectral phyerror events with insufficient length when 5531 * parsing for secondary 80 search FFT report. u64 attribute. 5532 */ 5533 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2, 5534 /* Number of spectral phyerror events without secondary 80 5535 * search FFT report. u64 attribute. 5536 */ 5537 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3, 5538 /* Number of spectral phyerror events with vht operation segment 1 id 5539 * mismatches in search fft report. u64 attribute. 5540 */ 5541 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4, 5542 /* Number of spectral phyerror events with vht operation segment 2 id 5543 * mismatches in search fft report. u64 attribute. 5544 */ 5545 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5, 5546 5547 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST, 5548 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX = 5549 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1, 5550 }; 5551 5552 /** 5553 * enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command 5554 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. 5555 */ 5556 enum qca_wlan_vendor_attr_spectral_cap { 5557 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0, 5558 /* Flag attribute to indicate phydiag capability */ 5559 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1, 5560 /* Flag attribute to indicate radar detection capability */ 5561 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2, 5562 /* Flag attribute to indicate spectral capability */ 5563 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3, 5564 /* Flag attribute to indicate advanced spectral capability */ 5565 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4, 5566 /* Spectral hardware generation. u32 attribute. 5567 * It uses values defined in enum 5568 * qca_wlan_vendor_spectral_scan_cap_hw_gen. 5569 */ 5570 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5, 5571 /* Spectral bin scaling formula ID. u16 attribute. 5572 * It uses values defined in enum 5573 * qca_wlan_vendor_spectral_scan_cap_formula_id. 5574 */ 5575 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID = 6, 5576 /* Spectral bin scaling param - low level offset. 5577 * s16 attribute. 5578 */ 5579 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_LOW_LEVEL_OFFSET = 7, 5580 /* Spectral bin scaling param - high level offset. 5581 * s16 attribute. 5582 */ 5583 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HIGH_LEVEL_OFFSET = 8, 5584 /* Spectral bin scaling param - RSSI threshold. 5585 * s16 attribute. 5586 */ 5587 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RSSI_THR = 9, 5588 /* Spectral bin scaling param - default AGC max gain. 5589 * u8 attribute. 5590 */ 5591 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10, 5592 5593 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST, 5594 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX = 5595 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1, 5596 }; 5597 5598 /** 5599 * enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command 5600 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. 5601 */ 5602 enum qca_wlan_vendor_attr_spectral_scan_status { 5603 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0, 5604 /* Flag attribute to indicate whether spectral scan is enabled */ 5605 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1, 5606 /* Flag attribute to indicate whether spectral scan is in progress*/ 5607 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2, 5608 5609 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST, 5610 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX = 5611 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1, 5612 }; 5613 5614 /** 5615 * enum qca_wlan_vendor_attr_config_latency_level - Level for 5616 * wlan latency module. 5617 * 5618 * There will be various of Wi-Fi functionality like scan/roaming/adaptive 5619 * power saving which would causing data exchange out of service, this 5620 * would be a big impact on latency. For latency sensitive applications over 5621 * Wi-Fi are intolerant to such operations and thus would configure them 5622 * to meet their respective needs. It is well understood by such applications 5623 * that altering the default behavior would degrade the Wi-Fi functionality 5624 * w.r.t the above pointed WLAN operations. 5625 * 5626 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL: 5627 * Default WLAN operation level which throughput orientated. 5628 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE: 5629 * Use moderate level to improve latency by limit scan duration. 5630 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW: 5631 * Use low latency level to benifit application like concurrent 5632 * downloading or video streaming via constraint scan/adaptive PS. 5633 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW: 5634 * Use ultra low latency level to benefit for gaming/voice 5635 * application via constraint scan/roaming/adaptive PS. 5636 */ 5637 enum qca_wlan_vendor_attr_config_latency_level { 5638 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_INVALID = 0, 5639 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL = 1, 5640 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE = 2, 5641 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW = 3, 5642 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW = 4, 5643 5644 /* keep last */ 5645 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST, 5646 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MAX = 5647 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST - 1, 5648 }; 5649 5650 /** 5651 * qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for 5652 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd 5653 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the 5654 * spectral scan request types. 5655 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to 5656 * set the spectral parameters and start scan. 5657 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to 5658 * only set the spectral parameters. 5659 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to 5660 * only start the spectral scan. 5661 */ 5662 enum qca_wlan_vendor_attr_spectral_scan_request_type { 5663 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG, 5664 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN, 5665 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG, 5666 }; 5667 5668 /** 5669 * qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for 5670 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd 5671 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the 5672 * spectral hardware generation. 5673 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1: generation 1 5674 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2: generation 2 5675 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3: generation 3 5676 */ 5677 enum qca_wlan_vendor_spectral_scan_cap_hw_gen { 5678 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1 = 0, 5679 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2 = 1, 5680 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3 = 2, 5681 }; 5682 5683 /** 5684 * qca_wlan_vendor_spectral_scan_cap_formula_id: Attribute values for 5685 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID in the vendor subcmd 5686 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the 5687 * Spectral bin scaling formula ID. 5688 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING: No scaling 5689 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED: AGC gain 5690 * and RSSI threshold based formula. 5691 */ 5692 enum qca_wlan_vendor_spectral_scan_cap_formula_id { 5693 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING = 0, 5694 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED = 1, 5695 }; 5696 5697 /** 5698 * enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative 5699 * RF Operating Parameter (RROP) information is available, and if so, at which 5700 * point in the application-driver interaction sequence it can be retrieved by 5701 * the application from the driver. This point may vary by architecture and 5702 * other factors. This is a u16 value. 5703 */ 5704 enum qca_wlan_vendor_attr_rropavail_info { 5705 /* RROP information is unavailable. */ 5706 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE, 5707 /* RROP information is available and the application can retrieve the 5708 * information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS 5709 * event from the driver. 5710 */ 5711 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START, 5712 /* RROP information is available only after a vendor specific scan 5713 * (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has 5714 * successfully completed. The application can retrieve the information 5715 * after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from 5716 * the driver. 5717 */ 5718 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END, 5719 }; 5720 5721 /** 5722 * enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific 5723 * Representative RF Operating Parameter (RROP) information. It is sent for the 5724 * vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is 5725 * intended for use by external Auto Channel Selection applications. It provides 5726 * guidance values for some RF parameters that are used by the system during 5727 * operation. These values could vary by channel, band, radio, and so on. 5728 */ 5729 enum qca_wlan_vendor_attr_rrop_info { 5730 QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0, 5731 5732 /* Representative Tx Power List (RTPL) which has an array of nested 5733 * values as per attributes in enum qca_wlan_vendor_attr_rtplinst. 5734 */ 5735 QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1, 5736 5737 QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST, 5738 QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX = 5739 QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1 5740 }; 5741 5742 /** 5743 * enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list 5744 * entry instances in the Representative Tx Power List (RTPL). It provides 5745 * simplified power values intended for helping external Auto channel Selection 5746 * applications compare potential Tx power performance between channels, other 5747 * operating conditions remaining identical. These values are not necessarily 5748 * the actual Tx power values that will be used by the system. They are also not 5749 * necessarily the max or average values that will be used. Instead, they are 5750 * relative, summarized keys for algorithmic use computed by the driver or 5751 * underlying firmware considering a number of vendor specific factors. 5752 */ 5753 enum qca_wlan_vendor_attr_rtplinst { 5754 QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0, 5755 5756 /* Primary channel number (u8) */ 5757 QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1, 5758 /* Representative Tx power in dBm (s32) with emphasis on throughput. */ 5759 QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2, 5760 /* Representative Tx power in dBm (s32) with emphasis on range. */ 5761 QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3, 5762 5763 QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST, 5764 QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX = 5765 QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1, 5766 }; 5767 5768 /** 5769 * enum qca_wlan_vendor_attr_mac - Used by the vendor command 5770 * QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. 5771 * 5772 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO: MAC mode info list which has an 5773 * array of nested values as per attributes in 5774 * enum qca_wlan_vendor_attr_mac_mode_info. 5775 */ 5776 enum qca_wlan_vendor_attr_mac { 5777 QCA_WLAN_VENDOR_ATTR_MAC_INVALID = 0, 5778 QCA_WLAN_VENDOR_ATTR_MAC_INFO = 1, 5779 5780 /* keep last */ 5781 QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST, 5782 QCA_WLAN_VENDOR_ATTR_MAC_MAX = 5783 QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST - 1, 5784 }; 5785 5786 /** 5787 * enum qca_wlan_vendor_attr_mac_iface_info - Information of the connected 5788 * WiFi netdev interface on a respective MAC. Used by the attribute 5789 * QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO. 5790 * 5791 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_ID: Wi-Fi Netdev's interface id(u32). 5792 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ: Associated frequency in MHz of 5793 * the connected Wi-Fi interface(u32). 5794 */ 5795 enum qca_wlan_vendor_attr_mac_iface_info { 5796 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_INVALID = 0, 5797 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_IFINDEX = 1, 5798 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ = 2, 5799 5800 /* keep last */ 5801 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST, 5802 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_MAX = 5803 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST - 1, 5804 }; 5805 5806 /** 5807 * enum qca_wlan_vendor_attr_mac_info - Points to MAC the information. 5808 * Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_INFO of the 5809 * vendor command QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. 5810 * 5811 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID: Hardware MAC ID associated for the 5812 * MAC (u32) 5813 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND: Band supported by the respective MAC 5814 * at a given point. This is a u32 bitmask of BIT(NL80211_BAND_*) as described 5815 * in enum nl80211_band. 5816 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO: Refers to list of WLAN net dev 5817 * interfaces associated with this MAC. Represented by enum 5818 * qca_wlan_vendor_attr_mac_iface_info. 5819 */ 5820 enum qca_wlan_vendor_attr_mac_info { 5821 QCA_WLAN_VENDOR_ATTR_MAC_INFO_INVALID = 0, 5822 QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID = 1, 5823 QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND = 2, 5824 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO = 3, 5825 5826 /* keep last */ 5827 QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST, 5828 QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAX = 5829 QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST - 1, 5830 5831 }; 5832 5833 #if !(defined (SUPPORT_WDEV_CFG80211_VENDOR_EVENT_ALLOC)) && \ 5834 (LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) && \ 5835 !(defined(WITH_BACKPORTS)) 5836 5837 static inline struct sk_buff * 5838 backported_cfg80211_vendor_event_alloc(struct wiphy *wiphy, 5839 struct wireless_dev *wdev, 5840 int approxlen, 5841 int event_idx, gfp_t gfp) 5842 { 5843 struct sk_buff *skb; 5844 5845 skb = cfg80211_vendor_event_alloc(wiphy, approxlen, event_idx, gfp); 5846 5847 if (skb && wdev) { 5848 struct nlattr *attr; 5849 u32 ifindex = wdev->netdev->ifindex; 5850 5851 nla_nest_cancel(skb, ((void **)skb->cb)[2]); 5852 if (nla_put_u32(skb, NL80211_ATTR_IFINDEX, ifindex)) 5853 goto nla_fail; 5854 5855 attr = nla_nest_start(skb, NL80211_ATTR_VENDOR_DATA); 5856 ((void **)skb->cb)[2] = attr; 5857 } 5858 5859 return skb; 5860 5861 nla_fail: 5862 kfree_skb(skb); 5863 5864 return NULL; 5865 } 5866 #define cfg80211_vendor_event_alloc backported_cfg80211_vendor_event_alloc 5867 #endif 5868 5869 /** 5870 * enum he_fragmentation_val - HE fragmentation support values 5871 * Indicates level of dynamic fragmentation that is supported by 5872 * a STA as a recipient. 5873 * HE fragmentation values are defined as per 11ax spec and are used in 5874 * HE capability IE to advertise the support. These values are validated 5875 * in the driver to check the device capability and advertised in the HE 5876 * capability element. 5877 * 5878 * @HE_FRAG_DISABLE: no support for dynamic fragmentation 5879 * @HE_FRAG_LEVEL1: support for dynamic fragments that are 5880 * contained within an MPDU or S-MPDU, no support for dynamic fragments 5881 * within an A-MPDU that is not an S-MPDU. 5882 * @HE_FRAG_LEVEL2: support for dynamic fragments that are 5883 * contained within an MPDU or S-MPDU and support for up to one dynamic 5884 * fragment for each MSDU, each A-MSDU if supported by the recipient, and 5885 * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an 5886 * MPDU or S-MPDU. 5887 * @HE_FRAG_LEVEL3: support for dynamic fragments that are 5888 * contained within an MPDU or S-MPDU and support for multiple dynamic 5889 * fragments for each MSDU and for each A-MSDU if supported by the 5890 * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic 5891 * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU. 5892 */ 5893 enum he_fragmentation_val { 5894 HE_FRAG_DISABLE, 5895 HE_FRAG_LEVEL1, 5896 HE_FRAG_LEVEL2, 5897 HE_FRAG_LEVEL3, 5898 }; 5899 5900 /** 5901 * enum he_mcs_config - HE MCS support configuration 5902 * 5903 * Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth. 5904 * These values are used in driver to configure the HE MCS map to advertise 5905 * Tx/Rx MCS map in HE capability and these values are applied for all the 5906 * streams supported by the device. To configure MCS for different bandwidths, 5907 * vendor command needs to be sent using this attribute with appropriate value. 5908 * For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS 5909 * attribute with QCA_WLAN_VENDOR_ATTR_HE_80_MCS0_7. And to configure HE MCS 5910 * for HE_160_MCS0_11 send this command using HE MCS config attribute with 5911 * value QCA_WLAN_VENDOR_ATTR_HE_160_MCS0_11; 5912 * 5913 * @HE_80_MCS0_7: support for HE 80/40/20MHz MCS 0 to 7 5914 * @HE_80_MCS0_9: support for HE 80/40/20MHz MCS 0 to 9 5915 * @HE_80_MCS0_11: support for HE 80/40/20MHz MCS 0 to 11 5916 * @HE_160_MCS0_7: support for HE 160MHz MCS 0 to 7 5917 * @HE_160_MCS0_9: support for HE 160MHz MCS 0 to 9 5918 * @HE_160_MCS0_11: support for HE 160MHz MCS 0 to 11 5919 * @HE_80p80_MCS0_7: support for HE 80p80MHz MCS 0 to 7 5920 * @HE_80p80_MCS0_9: support for HE 80p80MHz MCS 0 to 9 5921 * @HE_80p80_MCS0_11: support for HE 80p80MHz MCS 0 to 11 5922 */ 5923 enum he_mcs_config { 5924 HE_80_MCS0_7 = 0, 5925 HE_80_MCS0_9 = 1, 5926 HE_80_MCS0_11 = 2, 5927 HE_160_MCS0_7 = 4, 5928 HE_160_MCS0_9 = 5, 5929 HE_160_MCS0_11 = 6, 5930 HE_80p80_MCS0_7 = 8, 5931 HE_80p80_MCS0_9 = 9, 5932 HE_80p80_MCS0_11 = 10, 5933 }; 5934 5935 /** 5936 * enum qca_wlan_ba_session_config - BA session configuration 5937 * 5938 * Indicates the configuration values for BA session configuration attribute. 5939 * 5940 * @QCA_WLAN_ADD_BA: Establish a new BA session with given configuration. 5941 * @QCA_WLAN_DELETE_BA: Delete the existing BA session for given TID. 5942 */ 5943 enum qca_wlan_ba_session_config { 5944 QCA_WLAN_ADD_BA = 1, 5945 QCA_WLAN_DELETE_BA = 2, 5946 }; 5947 5948 /** 5949 * enum qca_wlan_ac_type - access category type 5950 * 5951 * Indicates the access category type value. 5952 * 5953 * @QCA_WLAN_AC_BE: BE access category 5954 * @QCA_WLAN_AC_BK: BK access category 5955 * @QCA_WLAN_AC_VI: VI access category 5956 * @QCA_WLAN_AC_VO: VO access category 5957 * @QCA_WLAN_AC_ALL: All ACs 5958 */ 5959 enum qca_wlan_ac_type { 5960 QCA_WLAN_AC_BE = 0, 5961 QCA_WLAN_AC_BK = 1, 5962 QCA_WLAN_AC_VI = 2, 5963 QCA_WLAN_AC_VO = 3, 5964 QCA_WLAN_AC_ALL = 4, 5965 }; 5966 5967 /** 5968 * enum qca_wlan_he_ltf_cfg - HE LTF configuration 5969 * 5970 * Indicates the HE LTF configuration value. 5971 * 5972 * @QCA_WLAN_HE_LTF_AUTO: HE-LTF is automatically set to 5973 * the mandatory HE-LTF based on the GI setting 5974 * @QCA_WLAN_HE_LTF_1X: 1X HE LTF is 3.2us LTF 5975 * @QCA_WLAN_HE_LTF_2X: 2X HE LTF is 6.4us LTF 5976 * @QCA_WLAN_HE_LTF_4X: 4X HE LTF is 12.8us LTF 5977 */ 5978 enum qca_wlan_he_ltf_cfg { 5979 QCA_WLAN_HE_LTF_AUTO = 0, 5980 QCA_WLAN_HE_LTF_1X = 1, 5981 QCA_WLAN_HE_LTF_2X = 2, 5982 QCA_WLAN_HE_LTF_4X = 3, 5983 }; 5984 5985 /** 5986 * enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration 5987 * 5988 * Indicates the HE trigger frame MAC padding duration value. 5989 * 5990 * @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to 5991 * process the trigger frame. 5992 * @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for 5993 * trigger frame. 5994 * @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for 5995 * trigger frame. 5996 */ 5997 enum qca_wlan_he_mac_padding_dur { 5998 QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0, 5999 QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1, 6000 QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2, 6001 }; 6002 6003 /** 6004 * enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration 6005 * 6006 * Indicates the HE Operating mode control channel width setting value. 6007 * 6008 * @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz 6009 * @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz 6010 * @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz 6011 * @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz 6012 */ 6013 enum qca_wlan_he_om_ctrl_ch_bw { 6014 QCA_WLAN_HE_OM_CTRL_BW_20M = 0, 6015 QCA_WLAN_HE_OM_CTRL_BW_40M = 1, 6016 QCA_WLAN_HE_OM_CTRL_BW_80M = 2, 6017 QCA_WLAN_HE_OM_CTRL_BW_160M = 3, 6018 }; 6019 6020 /** 6021 * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for 6022 * HE operating mode control transmit request. These attributes are 6023 * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and 6024 * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. 6025 * 6026 * @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value 6027 * indicates the maximum number of spatial streams, NSS, that the STA 6028 * supports in reception for PPDU bandwidths less than or equal to 80 MHz 6029 * and is set to NSS - 1. 6030 * 6031 * @QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW: Mandatory 8-bit unsigned value 6032 * indicates the operating channel width supported by the STA for both 6033 * reception and transmission. Uses enum qca_wlan_he_om_ctrl_ch_bw values. 6034 * 6035 * @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE: Mandatory 8-bit unsigned value 6036 * indicates the all trigger based UL MU operations by the STA. 6037 * 0 - UL MU operations are enabled by the STA. 6038 * 1 - All triggered UL MU transmissions are suspended by the STA. 6039 * 6040 * @QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS: Mandatory 8-bit unsigned value 6041 * indicates the maximum number of space-time streams, NSTS, that 6042 * the STA supports in transmission and is set to NSTS - 1. 6043 */ 6044 enum qca_wlan_vendor_attr_he_omi_tx { 6045 QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0, 6046 QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1, 6047 QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2, 6048 QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3, 6049 QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4, 6050 6051 /* keep last */ 6052 QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST, 6053 QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX = 6054 QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1, 6055 }; 6056 6057 /* Attributes for data used by 6058 * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION 6059 */ 6060 enum qca_wlan_vendor_attr_wifi_test_config { 6061 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0, 6062 /* 8-bit unsigned value to configure the driver to enable/disable 6063 * WMM feature. This attribute is used to configure testbed device. 6064 * 1-enable, 0-disable 6065 */ 6066 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1, 6067 6068 /* 8-bit unsigned value to configure the driver to accept/reject 6069 * the addba request from peer. This attribute is used to configure 6070 * the testbed device. 6071 * 1-accept addba, 0-reject addba 6072 */ 6073 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2, 6074 6075 /* 8-bit unsigned value to configure the driver to send or not to 6076 * send the addba request to peer. 6077 * This attribute is used to configure the testbed device. 6078 * 1-send addba, 0-do not send addba 6079 */ 6080 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3, 6081 6082 /* 8-bit unsigned value to indicate the HE fragmentation support. 6083 * Uses enum he_fragmentation_val values. 6084 * This attribute is used to configure the testbed device to 6085 * allow the advertised hardware capabilities to be downgraded 6086 * for testing purposes. 6087 */ 6088 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4, 6089 6090 /* 8-bit unsigned value to indicate the HE MCS support. 6091 * Uses enum he_mcs_config values. 6092 * This attribute is used to configure the testbed device to 6093 * allow the advertised hardware capabilities to be downgraded 6094 * for testing purposes. 6095 */ 6096 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5, 6097 6098 /* 8-bit unsigned value to configure the driver to allow or not to 6099 * allow the connection with WEP/TKIP in HT/VHT/HE modes. 6100 * This attribute is used to configure the testbed device. 6101 * 1-allow wep/tkip in HT/VHT/HE, 0-do not allow wep/tkip 6102 */ 6103 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WEP_TKIP_IN_HE = 6, 6104 6105 /* 8-bit unsigned value to configure the driver to add a 6106 * new BA session or delete the existing BA session for 6107 * given TID. ADDBA command uses the buffer size and tid 6108 * configuration if user specifies the values else default 6109 * value for buffer size is used for all tids if the tid 6110 * also not specified. For DEL_BA command TID value is 6111 * required to process the command. 6112 * Uses enum qca_wlan_ba_session_config values. 6113 * This attribute is used to configure the testbed device. 6114 */ 6115 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7, 6116 6117 /* 16-bit unsigned value to configure the buffer size in addba 6118 * request and response frames. 6119 * This attribute is used to configure the testbed device. 6120 * The range of the value is 0 to 256. 6121 */ 6122 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8, 6123 6124 /* 8-bit unsigned value to configure the buffer size in addba 6125 * request and response frames. 6126 * This attribute is used to configure the testbed device. 6127 */ 6128 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BA_TID = 9, 6129 6130 /* 8-bit unsigned value to configure the no ack policy. 6131 * To configure no ack policy, access category value 6132 * is required to process the command. 6133 * This attribute is used to configure the testbed device. 6134 * 1 - enable no ack, 0 - disable no ack 6135 */ 6136 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_NO_ACK = 10, 6137 6138 /* 8-bit unsigned value to configure the AC for no ack policy 6139 * This attribute is used to configure the testbed device. 6140 * uses the enum qca_wlan_ac_type values 6141 */ 6142 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_NO_ACK_AC = 11, 6143 6144 /* 8-bit unsigned value to configure the HE LTF 6145 * This attribute is used to configure the testbed device. 6146 * Uses the enum qca_wlan_he_ltf_cfg values. 6147 */ 6148 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_LTF = 12, 6149 6150 /* 8-bit unsigned value to configure the tx beamformee. 6151 * This attribute is used to configure the testbed device. 6152 * 1 - enable, 0 - disable. 6153 */ 6154 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13, 6155 6156 /* 8-bit unsigned value to configure the tx beamformee number of 6157 * space-time streams. 6158 * This attribute is used to configure the testbed device. 6159 * The range of the value is 0 to 8 6160 */ 6161 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14, 6162 6163 /* 8-bit unsigned value to configure the MU EDCA params for given AC 6164 * This attribute is used to configure the testbed device. 6165 * Uses the enum qca_wlan_ac_type values. 6166 */ 6167 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15, 6168 6169 /* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC 6170 * To configure MU EDCA AIFSN value, MU EDCA access category value 6171 * is required to process the command. 6172 * This attribute is used to configure the testbed device. 6173 */ 6174 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16, 6175 6176 /* 8-bit unsigned value to configure the MU EDCA ECW min value for 6177 * given AC. 6178 * To configure MU EDCA ECW min value, MU EDCA access category value 6179 * is required to process the command. 6180 * This attribute is used to configure the testbed device. 6181 */ 6182 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17, 6183 6184 /* 8-bit unsigned value to configure the MU EDCA ECW max value for 6185 * given AC. 6186 * To configure MU EDCA ECW max value, MU EDCA access category value 6187 * is required to process the command. 6188 * This attribute is used to configure the testbed device. 6189 */ 6190 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18, 6191 6192 /* 8-bit unsigned value to configure the MU EDCA timer for given AC 6193 * To configure MU EDCA timer value, MU EDCA access category value 6194 * is required to process the command. 6195 * This attribute is used to configure the testbed device. 6196 */ 6197 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19, 6198 6199 /* 8-bit unsigned value to configure the HE trigger frame MAC padding 6200 * duration. 6201 * This attribute is used to configure the testbed device. 6202 * Uses the enum qca_wlan_he_mac_padding_dur values. 6203 */ 6204 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20, 6205 6206 /* 8-bit unsigned value to override the MU EDCA params to defaults 6207 * regardless of the AP beacon MU EDCA params. If it is enabled use 6208 * the default values else use the MU EDCA params from AP beacon. 6209 * This attribute is used to configure the testbed device. 6210 * 1 - enable override, 0 - disable. 6211 */ 6212 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21, 6213 6214 /* 8-bit unsigned value to configure the support for receiving 6215 * an MPDU that contains an operating mode control subfield. 6216 * This attribute is used to configure the testbed device. 6217 * 1-enable, 0-disable. 6218 */ 6219 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22, 6220 6221 /* Nested attribute values required to setup the TWT session. 6222 * enum qca_wlan_vendor_attr_twt_setup provides the necessary 6223 * information to set up the session. It contains broadcast flags, 6224 * set_up flags, trigger value, flow type, flow ID, wake interval 6225 * exponent, protection, target wake time, wake duration, wake interval 6226 * mantissa. These nested attributes are used to setup a host triggered 6227 * TWT session. 6228 */ 6229 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23, 6230 6231 /* This nested attribute is used to terminate the current TWT session. 6232 * It does not currently carry any attributes. 6233 */ 6234 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24, 6235 6236 /* This nested attribute is used to suspend the current TWT session. 6237 * It does not currently carry any attributes. 6238 */ 6239 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25, 6240 6241 /* Nested attribute values to indicate the request for resume. 6242 * This attribute is used to resume the TWT session. 6243 * enum qca_wlan_vendor_attr_twt_resume provides the necessary 6244 * parameters required to resume the TWT session. 6245 */ 6246 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26, 6247 6248 /* 8-bit unsigned value to set the HE operating mode control 6249 * (OM CTRL) Channel Width subfield. 6250 * The Channel Width subfield indicates the operating channel width 6251 * supported by the STA for both reception and transmission. 6252 * Uses the enum qca_wlan_he_om_ctrl_ch_bw values. 6253 * This setting is cleared with the 6254 * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG 6255 * flag attribute to reset defaults. 6256 * This attribute is used to configure the testbed device. 6257 */ 6258 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27, 6259 6260 /* 8-bit unsigned value to configure the number of spatial 6261 * streams in HE operating mode control field. 6262 * This setting is cleared with the 6263 * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG 6264 * flag attribute to reset defaults. 6265 * This attribute is used to configure the testbed device. 6266 */ 6267 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28, 6268 6269 /* Flag attribute to configure the UL MU disable bit in 6270 * HE operating mode control field. 6271 * This setting is cleared with the 6272 * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG 6273 * flag attribute to reset defaults. 6274 * This attribute is used to configure the testbed device. 6275 */ 6276 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29, 6277 6278 /* Flag attribute to clear the previously set HE operating mode 6279 * control field configuration. 6280 * This attribute is used to configure the testbed device to reset 6281 * defaults to clear any previously set HE operating mode control 6282 * field configuration. 6283 */ 6284 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30, 6285 6286 /* 8-bit unsigned value to configure HE single user PPDU 6287 * transmission. By default this setting is disabled and it 6288 * is disabled in the reset defaults of the device configuration. 6289 * This attribute is used to configure the testbed device. 6290 * 1-enable, 0-disable 6291 */ 6292 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_SUPPDU = 31, 6293 6294 /* 8-bit unsigned value to configure action frame transmission 6295 * in HE trigger based PPDU transmission. 6296 * By default this setting is disabled and it is disabled in 6297 * the reset defaults of the device configuration. 6298 * This attribute is used to configure the testbed device. 6299 * 1-enable, 0-disable 6300 */ 6301 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_ACTION_TX_TB_PPDU = 32, 6302 6303 /* Nested attribute to indicate HE operating mode control field 6304 * transmission. It contains operating mode control field Nss, 6305 * channel bandwidth, Tx Nsts and UL MU disable attributes. 6306 * These nested attributes are used to send HE operating mode control 6307 * with configured values. 6308 * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes. 6309 * This attribute is used to configure the testbed device. 6310 */ 6311 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33, 6312 6313 /* 8-bit unsigned value to configure +HTC_HE support to indicate the 6314 * support for the reception of a frame that carries an HE variant 6315 * HT Control field. 6316 * This attribute is used to configure the testbed device. 6317 * 1-enable, 0-disable 6318 */ 6319 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_HTC_HE_SUPP = 34, 6320 6321 /* keep last */ 6322 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST, 6323 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX = 6324 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1, 6325 }; 6326 6327 /** 6328 * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for 6329 * TWT (Target Wake Time) setup request. These attributes are sent as part of 6330 * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and 6331 * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. 6332 * 6333 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute. 6334 * Disable (flag attribute not present) - Individual TWT 6335 * Enable (flag attribute present) - Broadcast TWT. 6336 * Individual means the session is between the STA and the AP. 6337 * This session is established using a separate negotiation between 6338 * STA and AP. 6339 * Broadcast means the session is across multiple STAs and an AP. The 6340 * configuration parameters are announced in Beacon frames by the AP. 6341 * 6342 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8). 6343 * Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to 6344 * specify the TWT request type 6345 * 6346 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute 6347 * Enable (flag attribute present) - TWT with trigger support. 6348 * Disable (flag attribute not present) - TWT without trigger support. 6349 * Trigger means the AP will send the trigger frame to allow STA to send data. 6350 * Without trigger, the STA will wait for the MU EDCA timer before 6351 * transmitting the data. 6352 * 6353 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8) 6354 * 0 - Announced TWT - In this mode, STA may skip few service periods to 6355 * save more power. If STA wants to wake up, it will send a PS-POLL/QoS 6356 * NULL frame to AP. 6357 * 1 - Unannounced TWT - The STA will wakeup during every SP. 6358 * 6359 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8) 6360 * Flow ID is the unique identifier for each TWT session. 6361 * Currently this is not required and dialog ID will be set to zero. 6362 * 6363 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8) 6364 * This attribute (exp) is used along with the mantissa to derive the 6365 * wake interval using the following formula: 6366 * pow(2,exp) = wake_intvl_us/wake_intvl_mantis 6367 * Wake interval is the interval between 2 successive SP. 6368 * 6369 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute 6370 * Enable (flag attribute present) - Protection required. 6371 * Disable (flag attribute not present) - Protection not required. 6372 * If protection is enabled, then the AP will use protection 6373 * mechanism using RTS/CTS to self to reserve the airtime. 6374 * 6375 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32) 6376 * This attribute is used as the SP offset which is the offset from 6377 * TSF after which the wake happens. The units are in microseconds. If 6378 * this attribute is not provided, then the value will be set to zero. 6379 * 6380 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32) 6381 * This is the duration of the service period. The units are in TU. 6382 * 6383 * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32) 6384 * This attribute is used to configure wake interval mantissa. 6385 * The units are in TU. 6386 */ 6387 enum qca_wlan_vendor_attr_twt_setup { 6388 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0, 6389 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1, 6390 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2, 6391 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3, 6392 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4, 6393 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5, 6394 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6, 6395 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7, 6396 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8, 6397 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9, 6398 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10, 6399 6400 /* keep last */ 6401 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST, 6402 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX = 6403 QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1, 6404 }; 6405 6406 /** 6407 * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for 6408 * TWT (Target Wake Time) resume request. These attributes are sent as part of 6409 * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and 6410 * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. 6411 * 6412 * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8) 6413 * This attribute is used as the SP offset which is the offset from 6414 * TSF after which the wake happens. The units are in microseconds. 6415 * If this attribute is not provided, then the value will be set to 6416 * zero. 6417 * 6418 * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32) 6419 * This attribute represents the next TWT subfield size. 6420 */ 6421 enum qca_wlan_vendor_attr_twt_resume { 6422 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0, 6423 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1, 6424 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2, 6425 6426 /* keep last */ 6427 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST, 6428 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX = 6429 QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1, 6430 }; 6431 6432 /** 6433 * enum qca_wlan_vendor_twt_setup_req_type - Required (u8) 6434 * Represents the setup type being requested for TWT. 6435 * @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT 6436 * parameters but relying on AP to fill the parameters during the negotiation. 6437 * @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested 6438 * values which the AP may accept or AP may provide alternative parameters 6439 * which the STA may accept. 6440 * @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any 6441 * alternate parameters than the requested ones. 6442 */ 6443 enum qca_wlan_vendor_twt_setup_req_type { 6444 QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1, 6445 QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2, 6446 QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3, 6447 }; 6448 6449 /** 6450 * enum qca_wlan_throughput_level - Current throughput level 6451 * 6452 * Indicates the current level of throughput calculated by driver. The driver 6453 * may choose different thresholds to decide whether the throughput level is 6454 * low or medium or high based on variety of parameters like physical link 6455 * capacity of current connection, number of pakcets being dispatched per 6456 * second etc. The throughput level events might not be consistent with the 6457 * actual current throughput value being observed. 6458 * 6459 * @QCA_WLAN_THROUGHPUT_LEVEL_LOW: Low level of throughput 6460 * @QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM: Medium level of throughput 6461 * @QCA_WLAN_THROUGHPUT_LEVEL_HIGH: High level of throughput 6462 */ 6463 enum qca_wlan_throughput_level { 6464 QCA_WLAN_THROUGHPUT_LEVEL_LOW = 0, 6465 QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM = 1, 6466 QCA_WLAN_THROUGHPUT_LEVEL_HIGH = 2, 6467 }; 6468 6469 /** 6470 * enum qca_wlan_vendor_attr_throughput_change - Vendor subcmd attributes to 6471 * report throughput changes from driver to user space. enum values are used 6472 * for NL attributes sent with 6473 * %QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT sub command. 6474 */ 6475 enum qca_wlan_vendor_attr_throughput_change { 6476 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_INVALID = 0, 6477 /* 6478 * Indicates the direction of throughput in which the change is being 6479 * reported. u8 attribute. Value is 0 for TX and 1 for RX. 6480 */ 6481 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_DIRECTION = 1, 6482 6483 /* 6484 * Indicates the newly observed throughput level. 6485 * qca_wlan_throughput_level describes the possible range of values. 6486 * u8 attribute. 6487 */ 6488 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_THROUGHPUT_LEVEL = 2, 6489 6490 /* 6491 * Indicates the driver's guidance on the new value to be set to 6492 * kernel's tcp parameter tcp_limit_output_bytes. u32 attribute. Driver 6493 * may optionally include this attribute. 6494 */ 6495 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_LIMIT_OUTPUT_BYTES = 3, 6496 6497 /* 6498 * Indicates the driver's guidance on the new value to be set to 6499 * kernel's tcp parameter tcp_adv_win_scale. s8 attribute. Possible 6500 * values are from -31 to 31. Driver may optionally include this 6501 * attribute. 6502 */ 6503 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_ADV_WIN_SCALE = 4, 6504 6505 /* 6506 * Indicates the driver's guidance on the new value to be set to 6507 * kernel's tcp parameter tcp_delack_seg. u32 attribute. Driver may 6508 * optionally include this attribute. 6509 */ 6510 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_DELACK_SEG = 5, 6511 6512 /* keep last */ 6513 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST, 6514 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_MAX = 6515 QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1, 6516 }; 6517 6518 /* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute 6519 * QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command 6520 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. 6521 */ 6522 enum qca_wlan_nan_ext_subcmd_type { 6523 /* Subcmd of type NAN Enable Request */ 6524 QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1, 6525 /* Subcmd of type NAN Disable Request */ 6526 QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2, 6527 }; 6528 6529 /** 6530 * enum qca_wlan_vendor_attr_nan_params - Used by the vendor command 6531 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. 6532 */ 6533 enum qca_wlan_vendor_attr_nan_params { 6534 QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0, 6535 /* Carries NAN command for firmware component. Every vendor command 6536 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a 6537 * payload containing the NAN command. NLA_BINARY attribute. 6538 */ 6539 QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1, 6540 /* Indicates the type of NAN command sent with 6541 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type 6542 * describes the possible range of values. This attribute is mandatory 6543 * if the command being issued is either 6544 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or 6545 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute. 6546 */ 6547 QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2, 6548 /* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz 6549 * band. This attribute is mandatory when command type is 6550 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute. 6551 */ 6552 QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3, 6553 /* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz 6554 * band. This attribute is optional and should be included when command 6555 * type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery 6556 * has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute. 6557 */ 6558 QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4, 6559 6560 /* keep last */ 6561 QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST, 6562 QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX = 6563 QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1 6564 }; 6565 #endif 6566