1 /* 2 * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for 5 * any purpose with or without fee is hereby granted, provided that the 6 * above copyright notice and this permission notice appear in all 7 * copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 10 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED 11 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE 12 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL 13 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 14 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 15 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 16 * PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 /** 20 * DOC: declares vendor commands interfacing with linux kernel 21 */ 22 23 24 #ifndef _WLAN_QCA_VENDOR_H_ 25 #define _WLAN_QCA_VENDOR_H_ 26 27 /* Vendor id to be used in vendor specific command and events 28 * to user space. 29 * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID, 30 * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and 31 * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in 32 * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that 33 */ 34 35 #define QCA_NL80211_VENDOR_ID 0x001374 36 37 /** 38 * enum qca_nl80211_vendor_subcmds: NL 80211 vendor sub command 39 * 40 * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Unspecified 41 * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test 42 * Sub commands 2 to 8 are not used 43 * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Roaming 44 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Avoid frequency. 45 * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: DFS capability 46 * @QCA_NL80211_VENDOR_SUBCMD_NAN: Nan 47 * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT: Ext stats 48 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET: Link layer stats set 49 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET: Link layer stats get 50 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR: Link layer stats clear 51 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS: Link layer stats radio 52 * results 53 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS: Link layer stats interface 54 * results 55 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS: Link layer stats peer 56 * results 57 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START: Ext scan start 58 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP: Ext scan stop 59 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS: Ext scan get valid 60 * channels 61 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES: Ext scan get capability 62 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS: Ext scan get cached 63 * results 64 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE: Ext scan results 65 * available. Used when report_threshold is reached in scan cache. 66 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT: Ext scan full scan 67 * result. Used to report scan results when each probe rsp. is received, 68 * if report_events enabled in wifi_scan_cmd_params. 69 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT: Ext scan event from target. 70 * Indicates progress of scanning state-machine. 71 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND: Ext scan hotlist 72 * ap found 73 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST: Ext scan set hotlist 74 * bssid 75 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST: Ext scan reset 76 * hotlist bssid 77 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE: Ext scan significant 78 * change 79 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE: Ext scan set 80 * significant change 81 * ap found 82 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE: Ext scan reset 83 * significant change 84 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE: Ext tdls enable 85 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE: Ext tdls disable 86 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS: Ext tdls get status 87 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE: Ext tdls state 88 * @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES: Get supported features 89 * @QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI: Set scanning_mac_oui 90 * @QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG: No DFS flag 91 * @QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX: Get Concurrency Matrix 92 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Get the key mgmt offload keys 93 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: After roaming, send the 94 * roaming and auth information. 95 * @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED: Set OCB schedule 96 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS offload flag 97 * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Get the supported features by the 98 * driver. 99 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Indicate that driver 100 * started CAC on DFS channel 101 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Indicate that driver 102 * completed the CAC check on DFS channel 103 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Indicate that the CAC 104 * check was aborted by the driver 105 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Indicate that the 106 * driver completed NOP 107 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Indicate that the 108 * driver detected radar signal on the current operating channel 109 * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: get wlan driver information 110 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START: start wifi logger 111 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP: memory dump request 112 * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logger feature set 113 * @QCA_NL80211_VENDOR_SUBCMD_ROAM: roam 114 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST: extscan set ssid hotlist 115 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST: 116 * extscan reset ssid hotlist 117 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND: hotlist ssid found 118 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST: hotlist ssid lost 119 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST: set pno list 120 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST: set passpoint list 121 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST: 122 * reset passpoint list 123 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND: pno network found 124 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND: 125 * passpoint network found 126 * @QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION: set wifi config 127 * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION: get wifi config 128 * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: get logging features 129 * @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: get link properties 130 * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG: set gateway parameters 131 * @QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST: get preferred channel 132 list 133 * @QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL: channel hint 134 * @QCA_NL80211_VENDOR_SUBCMD_SETBAND: vendor setband command 135 * @QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN: venodr scan command 136 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE: vendor scan complete 137 * @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: vendor abort scan 138 * @QCA_NL80211_VENDOR_SUBCMD_OTA_TEST: enable OTA test 139 * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE: set tx power by percentage 140 * @QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB: reduce tx power by DB 141 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG: SAP configuration 142 * @QCA_NL80211_VENDOR_SUBCMD_TSF: TSF operations command 143 * @QCA_NL80211_VENDOR_SUBCMD_WISA: WISA mode configuration 144 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to 145 * start the P2P Listen Offload function in device and pass the listen 146 * channel, period, interval, count, number of device types, device 147 * types and vendor information elements to device driver and firmware. 148 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to 149 * indicate stop request/response of the P2P Listen Offload function in 150 * device. As an event, it indicates either the feature stopped after it 151 * was already running or feature has actually failed to start. 152 * @QCA_NL80211_VENDOR_SUBCMD_GET_STATION: send BSS Information 153 * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After SAP starts 154 * beaconing, this sub command provides the driver, the frequencies on the 155 * 5 GHz to check for any radar activity. Driver selects one channel from 156 * this priority list provided through 157 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts 158 * to check for radar activity on it. If no radar activity is detected 159 * during the channel availability check period, driver internally switches 160 * to the selected frequency of operation. If the frequency is zero, driver 161 * internally selects a channel. The status of this conditional switch is 162 * indicated through an event using the same sub command through 163 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are 164 * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch 165 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Command/event used to config 166 * indication period and threshold for MAC layer counters. 167 * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior 168 * in the host driver. The different TDLS configurations are defined 169 * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration. 170 * @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Get HE related capabilities 171 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS:Set the Specific Absorption Rate 172 * (SAR) power limits. A critical regulation for FCC compliance, OEMs 173 * require methods to set SAR limits on TX power of WLAN/WWAN. 174 * enum qca_vendor_attr_sar_limits attributes are used with this command. 175 * @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: Vendor command used to get/set 176 * configuration of vendor ACS. 177 * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the 178 * requisite information leading to a power save failure. The information 179 * carried as part of this event is represented by the 180 * enum qca_attr_chip_power_save_failure attributes. 181 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics 182 * collection. Uses attributes defined in enum qca_attr_nud_stats_set. 183 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These 184 * statistics are represented by the enum qca_attr_nud_stats_get 185 * attributes. 186 * @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch 187 * the BSS transition status, whether accept or reject, for a list of 188 * candidate BSSIDs provided by the userspace. This uses the vendor 189 * attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and 190 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify 191 * the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an 192 * array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in 193 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response 194 * the driver shall specify array of 195 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and 196 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in 197 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. 198 * @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a 199 * specific QCA module. The trace levels are represented by 200 * enum qca_attr_trace_level attributes. 201 * @QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT: Set the Beam Refinement 202 * Protocol antenna limit in different modes. See enum 203 * qca_wlan_vendor_attr_brp_ant_limit_mode. 204 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan 205 * parameters are specified by enum qca_wlan_vendor_attr_spectral_scan. 206 * This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) 207 * identifying the operation in success case. 208 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses 209 * a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from 210 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START to identify the scan to 211 * be stopped. 212 * @QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS: Set the active Type Of Service on the 213 * specific interface. This can be used to modify some of the low level 214 * scan parameters (off channel dwell time, home channel time) in the 215 * driver/firmware. These parameters are maintained within the host 216 * driver. 217 * This command is valid only when the interface is in the connected 218 * state. 219 * These scan parameters shall be reset by the driver/firmware once 220 * disconnected. The attributes used with this command are defined in 221 * enum qca_wlan_vendor_attr_active_tos. 222 * @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the 223 * driver has detected an internal failure. This event carries the 224 * information indicating the reason that triggered this detection. The 225 * attributes for this command are defined in 226 * enum qca_wlan_vendor_attr_hang. 227 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values 228 * of spectral parameters used. The spectral scan parameters are specified 229 * by enum qca_wlan_vendor_attr_spectral_scan. 230 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats 231 * for spectral scan functionality. The debug stats are specified by 232 * enum qca_wlan_vendor_attr_spectral_diag_stats. 233 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral 234 * scan system capabilities. The capabilities are specified 235 * by enum qca_wlan_vendor_attr_spectral_cap. 236 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current 237 * status of spectral scan. The status values are specified 238 * by enum qca_wlan_vendor_attr_spectral_scan_status. 239 * @QCA_NL80211_VENDOR_SUBCMD_HTT_STATS: Request the firmware 240 * DP stats for a particualr stats type for response evnet 241 * it carries the stats data sent from the FW 242 * @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative 243 * RF Operating Parameter (RROP) information. The attributes for this 244 * information are defined in enum qca_wlan_vendor_attr_rrop_info. This is 245 * intended for use by external Auto Channel Selection applications. 246 * @QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS: Get the Specific Absorption Rate 247 * (SAR) power limits. This is a companion to the command 248 * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the 249 * settings currently in use. The attributes returned by this command are 250 * defined by enum qca_vendor_attr_sar_limits. 251 * @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO: Provides the current behaviour of 252 * the WLAN hardware MAC's associated with each WLAN netdev interface. 253 * This works both as a query (user space asks the current mode) or event 254 * interface (driver advertizing the current mode to the user space). 255 * Driver does not trigger this event for temporary hardware mode changes. 256 * Mode changes w.r.t Wi-Fi connection updation ( VIZ creation / deletion, 257 * channel change etc ) are updated with this event. Attributes for this 258 * interface are defined in enum qca_wlan_vendor_attr_mac. 259 * @QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH: Set MSDU queue depth threshold 260 * per peer per TID. Attributes for this command are define in 261 * enum qca_wlan_set_qdepth_thresh_attr 262 * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi 263 * test configuration. Attributes for this command are defined in 264 * enum qca_wlan_vendor_attr_wifi_test_config. 265 * 266 */ 267 268 enum qca_nl80211_vendor_subcmds { 269 QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, 270 QCA_NL80211_VENDOR_SUBCMD_TEST = 1, 271 QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, 272 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, 273 QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, 274 QCA_NL80211_VENDOR_SUBCMD_NAN = 12, 275 QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13, 276 277 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, 278 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, 279 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, 280 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, 281 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, 282 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, 283 284 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START = 20, 285 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP = 21, 286 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS = 22, 287 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES = 23, 288 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS = 24, 289 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE = 25, 290 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT = 26, 291 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT = 27, 292 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND = 28, 293 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST = 29, 294 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST = 30, 295 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE = 31, 296 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE = 32, 297 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE = 33, 298 299 QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, 300 QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, 301 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, 302 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, 303 304 QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, 305 306 QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, 307 QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, 308 309 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST = 41, 310 311 /* Get Concurrency Matrix */ 312 QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, 313 314 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, 315 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, 316 QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, 317 318 /* Deprecated */ 319 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_SCHED = 53, 320 321 QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, 322 323 QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, 324 325 /* Off loaded DFS events */ 326 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56, 327 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57, 328 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58, 329 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59, 330 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60, 331 332 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61, 333 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62, 334 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63, 335 QCA_NL80211_VENDOR_SUBCMD_ROAM = 64, 336 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST = 65, 337 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST = 66, 338 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND = 67, 339 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST = 68, 340 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_LIST = 69, 341 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_SET_PASSPOINT_LIST = 70, 342 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_RESET_PASSPOINT_LIST = 71, 343 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND = 72, 344 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND = 73, 345 346 /* Wi-Fi Configuration subcommands */ 347 QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74, 348 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75, 349 QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76, 350 QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77, 351 352 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78, 353 QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79, 354 QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80, 355 QCA_NL80211_VENDOR_SUBCMD_NDP = 81, 356 357 /* NS Offload enable/disable cmd */ 358 QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82, 359 360 QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83, 361 QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84, 362 363 QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85, 364 365 QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91, 366 /* OCB commands */ 367 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92, 368 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93, 369 QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94, 370 QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95, 371 QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96, 372 QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97, 373 QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98, 374 QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99, 375 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100, 376 377 /* subcommand to get link properties */ 378 QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101, 379 /* LFR Subnet Detection */ 380 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102, 381 382 /* DBS subcommands */ 383 QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103, 384 QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104, 385 386 /* Vendor setband command */ 387 QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105, 388 389 /* Vendor scan commands */ 390 QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106, 391 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107, 392 393 /* OTA test subcommand */ 394 QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108, 395 /* Tx power scaling subcommands */ 396 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109, 397 /* Tx power scaling in db subcommands */ 398 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB = 115, 399 QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116, 400 QCA_NL80211_VENDOR_SUBCMD_STA_CONNECT_ROAM_POLICY = 117, 401 QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118, 402 QCA_NL80211_VENDOR_SUBCMD_TSF = 119, 403 QCA_NL80211_VENDOR_SUBCMD_WISA = 120, 404 QCA_NL80211_VENDOR_SUBCMD_GET_STATION = 121, 405 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122, 406 QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123, 407 QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124, 408 QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125, 409 410 QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126, 411 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127, 412 /* FTM/indoor location subcommands */ 413 QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128, 414 QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129, 415 QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130, 416 QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131, 417 QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132, 418 QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133, 419 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134, 420 QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135, 421 QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136, 422 423 /* Encrypt/Decrypt command */ 424 QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137, 425 426 QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138, 427 /* DMG low level RF sector operations */ 428 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139, 429 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140, 430 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141, 431 QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142, 432 433 /* Configure the TDLS mode from user space */ 434 QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143, 435 436 QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144, 437 438 /* Vendor abort scan command */ 439 QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145, 440 441 /* Set Specific Absorption Rate(SAR) Power Limits */ 442 QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146, 443 444 /* External Auto channel configuration setting */ 445 QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147, 446 447 QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148, 448 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149, 449 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150, 450 QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151, 451 452 /* Set the trace level for QDF */ 453 QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152, 454 455 QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT = 153, 456 457 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154, 458 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155, 459 QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156, 460 QCA_NL80211_VENDOR_SUBCMD_HANG = 157, 461 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158, 462 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159, 463 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160, 464 QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161, 465 QCA_NL80211_VENDOR_SUBCMD_HTT_STATS = 162, 466 QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163, 467 QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164, 468 QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO = 165, 469 QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166, 470 /* Wi-Fi test configuration subcommand */ 471 QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169, 472 }; 473 474 enum qca_wlan_vendor_tos { 475 QCA_WLAN_VENDOR_TOS_BK = 0, 476 QCA_WLAN_VENDOR_TOS_BE = 1, 477 QCA_WLAN_VENDOR_TOS_VI = 2, 478 QCA_WLAN_VENDOR_TOS_VO = 3, 479 }; 480 481 /** 482 * enum qca_wlan_vendor_attr_active_tos - Used by the vendor command 483 * QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS. 484 */ 485 enum qca_wlan_vendor_attr_active_tos { 486 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_INVALID = 0, 487 /* Type Of Service - Represented by qca_wlan_vendor_tos */ 488 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS = 1, 489 /* Flag attribute representing the start (attribute included) or stop 490 * (attribute not included) of the respective TOS. 491 */ 492 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2, 493 QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_MAX = 3, 494 }; 495 496 enum qca_wlan_vendor_hang_reason { 497 /* Unspecified reason */ 498 QCA_WLAN_HANG_REASON_UNSPECIFIED = 0, 499 /* No Map for the MAC entry for the received frame */ 500 QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1, 501 /* peer deletion timeout happened */ 502 QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2, 503 /* peer unmap timeout */ 504 QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3, 505 /* Scan request timed out */ 506 QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4, 507 /* Consecutive Scan attempt failures */ 508 QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5, 509 /* Unable to get the message buffer */ 510 QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6, 511 /* Current command processing is timedout */ 512 QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7, 513 /* Timeout for an ACK from FW for suspend request */ 514 QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8, 515 /* Timeout for an ACK from FW for resume request */ 516 QCA_WLAN_HANG_RESUME_TIMEOUT = 9, 517 /* Transmission timeout for consecutive data frames */ 518 QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10, 519 /* Timeout for the TX completion status of data frame */ 520 QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11, 521 /* DXE failure for tx/Rx, DXE resource unavailability */ 522 QCA_WLAN_HANG_DXE_FAILURE = 12, 523 /* WMI pending commands exceed the maximum count */ 524 QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13, 525 }; 526 527 /** 528 * enum qca_wlan_vendor_attr_hang - Used by the vendor command 529 * QCA_NL80211_VENDOR_SUBCMD_HANG. 530 */ 531 enum qca_wlan_vendor_attr_hang { 532 QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0, 533 /* 534 * Reason for the Hang - Represented by enum 535 * qca_wlan_vendor_hang_reason. 536 */ 537 QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1, 538 539 QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST, 540 QCA_WLAN_VENDOR_ATTR_HANG_MAX = 541 QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1, 542 }; 543 544 /** 545 * enum qca_vendor_attr_set_trace_level - Config params for QDF set trace level 546 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID: Invalid trace level 547 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM : Trace level parameters 548 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID : Module of which trace 549 level needs to be updated. 550 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK : verbose mask, which need 551 * to be set. 552 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST : after last. 553 * @QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX : Max attribute. 554 */ 555 enum qca_vendor_attr_set_trace_level { 556 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_INVALID = 0, 557 /* 558 * Array of QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM 559 * attributes. 560 */ 561 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_PARAM = 1, 562 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MODULE_ID = 2, 563 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_TRACE_MASK = 3, 564 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST, 565 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_MAX = 566 QCA_WLAN_VENDOR_ATTR_SET_TRACE_LEVEL_AFTER_LAST - 1, 567 }; 568 569 /** 570 * enum qca_wlan_vendor_attr_get_station - Sub commands used by 571 * QCA_NL80211_VENDOR_SUBCMD_GET_STATION to get the corresponding 572 * station information. The information obtained through these 573 * commands signify the current info in connected state and 574 * latest cached information during the connected state , if queried 575 * when in disconnected state. 576 * 577 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID: Invalid attribute 578 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO: bss info 579 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON: assoc fail reason 580 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE: remote station info 581 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST: After last 582 */ 583 enum qca_wlan_vendor_attr_get_station { 584 QCA_WLAN_VENDOR_ATTR_GET_STATION_INVALID = 0, 585 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO, 586 QCA_WLAN_VENDOR_ATTR_GET_STATION_ASSOC_FAIL_REASON, 587 QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE, 588 589 /* keep last */ 590 QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST, 591 QCA_WLAN_VENDOR_ATTR_GET_STATION_MAX = 592 QCA_WLAN_VENDOR_ATTR_GET_STATION_AFTER_LAST - 1, 593 }; 594 595 /** 596 * enum qca_wlan_802_11_mode - dot11 mode 597 * @QCA_WLAN_802_11_MODE_11B: mode B 598 * @QCA_WLAN_802_11_MODE_11G: mode G 599 * @QCA_WLAN_802_11_MODE_11N: mode N 600 * @QCA_WLAN_802_11_MODE_11A: mode A 601 * @QCA_WLAN_802_11_MODE_11AC: mode AC 602 * @QCA_WLAN_802_11_MODE_INVALID: Invalid dot11 mode 603 */ 604 enum qca_wlan_802_11_mode { 605 QCA_WLAN_802_11_MODE_11B, 606 QCA_WLAN_802_11_MODE_11G, 607 QCA_WLAN_802_11_MODE_11N, 608 QCA_WLAN_802_11_MODE_11A, 609 QCA_WLAN_802_11_MODE_11AC, 610 QCA_WLAN_802_11_MODE_INVALID, 611 }; 612 613 /** 614 * enum qca_wlan_auth_type - Authentication key management type 615 * @QCA_WLAN_AUTH_TYPE_INVALID: Invalid key management type 616 * @QCA_WLAN_AUTH_TYPE_OPEN: Open key 617 * @QCA_WLAN_AUTH_TYPE_SHARED: shared key 618 * @QCA_WLAN_AUTH_TYPE_WPA: wpa key 619 * @QCA_WLAN_AUTH_TYPE_WPA_PSK: wpa psk key 620 * @QCA_WLAN_AUTH_TYPE_WPA_NONE: wpa none key 621 * @QCA_WLAN_AUTH_TYPE_RSN: rsn key 622 * @QCA_WLAN_AUTH_TYPE_RSN_PSK: rsn psk key 623 * @QCA_WLAN_AUTH_TYPE_FT: ft key 624 * @QCA_WLAN_AUTH_TYPE_FT_PSK: ft psk key 625 * @QCA_WLAN_AUTH_TYPE_SHA256: shared 256 key 626 * @QCA_WLAN_AUTH_TYPE_SHA256_PSK: shared 256 psk 627 * @QCA_WLAN_AUTH_TYPE_WAI: wai key 628 * @QCA_WLAN_AUTH_TYPE_WAI_PSK wai psk key 629 * @QCA_WLAN_AUTH_TYPE_CCKM_WPA: cckm wpa key 630 * @QCA_WLAN_AUTH_TYPE_CCKM_RSN: cckm rsn key 631 */ 632 enum qca_wlan_auth_type { 633 QCA_WLAN_AUTH_TYPE_INVALID, 634 QCA_WLAN_AUTH_TYPE_OPEN, 635 QCA_WLAN_AUTH_TYPE_SHARED, 636 QCA_WLAN_AUTH_TYPE_WPA, 637 QCA_WLAN_AUTH_TYPE_WPA_PSK, 638 QCA_WLAN_AUTH_TYPE_WPA_NONE, 639 QCA_WLAN_AUTH_TYPE_RSN, 640 QCA_WLAN_AUTH_TYPE_RSN_PSK, 641 QCA_WLAN_AUTH_TYPE_FT, 642 QCA_WLAN_AUTH_TYPE_FT_PSK, 643 QCA_WLAN_AUTH_TYPE_SHA256, 644 QCA_WLAN_AUTH_TYPE_SHA256_PSK, 645 QCA_WLAN_AUTH_TYPE_WAI, 646 QCA_WLAN_AUTH_TYPE_WAI_PSK, 647 QCA_WLAN_AUTH_TYPE_CCKM_WPA, 648 QCA_WLAN_AUTH_TYPE_CCKM_RSN, 649 QCA_WLAN_AUTH_TYPE_AUTOSWITCH, 650 }; 651 652 /** 653 * enum qca_wlan_vendor_attr_get_station_info - Station Info queried 654 * through QCA_NL80211_VENDOR_SUBCMD_GET_STATION. 655 * 656 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID: Invalid Attribute 657 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR: 658 * Get the standard NL attributes Nested with this attribute. 659 * Ex : Query BW , BITRATE32 , NSS , Signal , Noise of the Link - 660 * NL80211_ATTR_SSID / NL80211_ATTR_SURVEY_INFO (Connected Channel) / 661 * NL80211_ATTR_STA_INFO 662 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR: 663 * Get the standard NL attributes Nested with this attribute. 664 * Ex : Query HT/VHT Capability advertized by the AP. 665 * NL80211_ATTR_VHT_CAPABILITY / NL80211_ATTR_HT_CAPABILITY 666 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT: 667 * Number of successful Roam attempts before a 668 * disconnect, Unsigned 32 bit value 669 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM: 670 * Authentication Key Management Type used for the connected session. 671 * Signified by enum qca_wlan_auth_type 672 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE: 802.11 Mode of the 673 * connected Session, signified by enum qca_wlan_802_11_mode 674 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION: 675 * HS20 Indication Element 676 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON: 677 * Status Code Corresponding to the Association Failure. 678 * Unsigned 32 bit value. 679 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE: 680 * Max phy rate of remote station 681 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS: 682 * TX packets to remote station 683 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES: 684 * TX bytes to remote station 685 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS: 686 * RX packets from remote station 687 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES: 688 * RX bytes from remote station 689 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE: 690 * Last TX rate with remote station 691 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE: 692 * Last RX rate with remote station 693 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM: 694 * Remote station enable/disable WMM 695 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE: 696 * Remote station connection mode 697 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU: 698 * Remote station AMPDU enable/disable 699 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC: 700 * Remote station TX Space-time block coding enable/disable 701 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC: 702 * Remote station RX Space-time block coding enable/disable 703 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH: 704 * Remote station channel width 705 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE: 706 * Remote station short GI enable/disable 707 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD: Attribute type for padding 708 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST: After last 709 */ 710 enum qca_wlan_vendor_attr_get_station_info { 711 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID = 0, 712 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_LINK_STANDARD_NL80211_ATTR, 713 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_STANDARD_NL80211_ATTR, 714 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ROAM_COUNT, 715 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AKM, 716 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_802_11_MODE, 717 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AP_HS20_INDICATION, 718 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HT_OPERATION, 719 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_VHT_OPERATION, 720 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_ASSOC_FAIL_REASON, 721 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_MAX_PHY_RATE, 722 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_PACKETS, 723 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_BYTES, 724 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_PACKETS, 725 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_BYTES, 726 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_TX_RATE, 727 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_LAST_RX_RATE, 728 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_WMM, 729 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SUPPORTED_MODE, 730 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_AMPDU, 731 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_TX_STBC, 732 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_RX_STBC, 733 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_CH_WIDTH, 734 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_REMOTE_SGI_ENABLE, 735 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0)) 736 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_PAD, 737 #endif 738 /* keep last */ 739 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST, 740 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_MAX = 741 QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST - 1, 742 }; 743 744 /** 745 * enum qca_nl80211_vendor_subcmds_index - vendor sub commands index 746 * 747 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX: Avoid frequency 748 * @QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX: Nan 749 * @QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX: Ext stats 750 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX: Ext scan start 751 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX: Ext scan stop 752 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX: Ext scan get 753 * capability 754 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX: Ext scan get 755 * cached results 756 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX: Ext scan 757 * results available 758 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX: Ext scan full 759 * scan result 760 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX: Ext scan event 761 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX: Ext scan hot list 762 * AP found 763 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX: Ext scan set 764 * bssid hotlist 765 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX: Ext scan reset 766 * bssid hotlist 767 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX: Ext scan 768 * significant change 769 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX: Ext scan 770 * set significant change 771 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX: Ext scan 772 * reset significant change 773 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX: Set stats 774 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX: Get stats 775 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX: Clear stats 776 * @QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX: Radio stats 777 * @QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX: Iface stats 778 * @QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX: Peer info stats 779 * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT_INDEX: MAC layer counters 780 * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX: Ext tdls state change 781 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX: ACS command 782 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX: Pass Roam and Auth info 783 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX: hotlist ap lost 784 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX: 785 * pno network found index 786 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX: 787 * passpoint match found index 788 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX: 789 * set ssid hotlist index 790 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX: 791 * reset ssid hotlist index 792 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX: 793 * hotlist ssid found index 794 * @QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX: 795 * hotlist ssid lost index 796 * @QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX 797 * dcc stats event index 798 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX: vendor scan index 799 * @QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX: 800 * vendor scan complete event index 801 * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX: 802 * update gateway parameters index 803 * @QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX: TSF response events index 804 * @QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX: 805 * P2P listen offload index 806 * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX: SAP 807 * conditional channel switch index 808 * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET_INDEX: NUD DEBUG Stats index 809 * @QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX: hang event reason index 810 * @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX: MAC mode info index 811 */ 812 813 enum qca_nl80211_vendor_subcmds_index { 814 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX = 0, 815 816 #ifdef WLAN_FEATURE_NAN 817 QCA_NL80211_VENDOR_SUBCMD_NAN_INDEX, 818 #endif /* WLAN_FEATURE_NAN */ 819 820 #ifdef WLAN_FEATURE_STATS_EXT 821 QCA_NL80211_VENDOR_SUBCMD_STATS_EXT_INDEX, 822 #endif /* WLAN_FEATURE_STATS_EXT */ 823 824 #ifdef FEATURE_WLAN_EXTSCAN 825 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START_INDEX, 826 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_STOP_INDEX, 827 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CAPABILITIES_INDEX, 828 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS_INDEX, 829 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE_INDEX, 830 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT_INDEX, 831 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT_INDEX, 832 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND_INDEX, 833 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST_INDEX, 834 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_BSSID_HOTLIST_INDEX, 835 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE_INDEX, 836 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SIGNIFICANT_CHANGE_INDEX, 837 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SIGNIFICANT_CHANGE_INDEX, 838 #endif /* FEATURE_WLAN_EXTSCAN */ 839 840 #ifdef WLAN_FEATURE_LINK_LAYER_STATS 841 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET_INDEX, 842 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET_INDEX, 843 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR_INDEX, 844 QCA_NL80211_VENDOR_SUBCMD_LL_RADIO_STATS_INDEX, 845 QCA_NL80211_VENDOR_SUBCMD_LL_IFACE_STATS_INDEX, 846 QCA_NL80211_VENDOR_SUBCMD_LL_PEER_INFO_STATS_INDEX, 847 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT_INDEX, 848 #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ 849 850 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE_CHANGE_INDEX, 851 QCA_NL80211_VENDOR_SUBCMD_DO_ACS_INDEX, 852 #ifdef WLAN_FEATURE_ROAM_OFFLOAD 853 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH_INDEX, 854 #endif 855 /* DFS */ 856 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED_INDEX, 857 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED_INDEX, 858 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED_INDEX, 859 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED_INDEX, 860 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED_INDEX, 861 #ifdef FEATURE_WLAN_EXTSCAN 862 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_LOST_INDEX, 863 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_NETWORK_FOUND_INDEX, 864 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_PNO_PASSPOINT_NETWORK_FOUND_INDEX, 865 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST_INDEX, 866 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_RESET_SSID_HOTLIST_INDEX, 867 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_FOUND_INDEX, 868 QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_SSID_LOST_INDEX, 869 #endif /* FEATURE_WLAN_EXTSCAN */ 870 QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION_INDEX, 871 QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI_INDEX, 872 #ifdef WLAN_FEATURE_MEMDUMP 873 QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP_INDEX, 874 #endif /* WLAN_FEATURE_MEMDUMP */ 875 /* OCB events */ 876 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT_INDEX, 877 QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX, 878 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX, 879 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX, 880 #ifdef WLAN_FEATURE_TSF 881 QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX, 882 #endif 883 #ifdef WLAN_FEATURE_NAN_DATAPATH 884 QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX, 885 #endif /* WLAN_FEATURE_NAN_DATAPATH */ 886 QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX, 887 QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH_INDEX, 888 QCA_NL80211_VENDOR_SUBCMD_UPDATE_EXTERNAL_ACS_CONFIG, 889 QCA_NL80211_VENDOR_SUBCMD_PWR_SAVE_FAIL_DETECTED_INDEX, 890 QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET_INDEX, 891 QCA_NL80211_VENDOR_SUBCMD_HANG_REASON_INDEX, 892 QCA_NL80211_VENDOR_SUBCMD_HTT_STATS_INDEX, 893 QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO_INDEX, 894 }; 895 896 /** 897 * enum qca_wlan_vendor_attr_tdls_enable - TDLS enable attribute 898 * 899 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID: Invalid initial value 900 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR: An array of 6 x Unsigned 8-bit 901 * value 902 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL: Signed 32-bit value, but lets 903 * keep as unsigned for now 904 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS: operating class 905 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS: Enable max latency in ms 906 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS: Enable min bandwidth 907 * in KBPS 908 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST: After last 909 * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX: Max value 910 */ 911 enum qca_wlan_vendor_attr_tdls_enable { 912 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID = 0, 913 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR, 914 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL, 915 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS, 916 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS, 917 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS, 918 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST, 919 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX = 920 QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST - 1, 921 }; 922 923 /** 924 * enum qca_wlan_vendor_attr_tdls_disable: tdls disable attribute 925 * 926 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID: Invalid initial value 927 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR: An array of 6 x Unsigned 928 * 8-bit value 929 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST: After last 930 * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX: Max value 931 */ 932 enum qca_wlan_vendor_attr_tdls_disable { 933 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID = 0, 934 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR, 935 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST, 936 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX = 937 QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST - 1, 938 }; 939 940 /** 941 * qca_chip_power_save_failure_reason: Power save failure reason 942 * @QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL: Indicates power save failure 943 * due to protocol/module. 944 * @QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE: power save failure 945 * due to hardware 946 */ 947 enum qca_chip_power_save_failure_reason { 948 QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, 949 QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, 950 }; 951 952 /** 953 * qca_attr_chip_power_save_failure: attributes to vendor subcmd 954 * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carry the requisite 955 * information leading to the power save failure. 956 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID : invalid 957 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON : power save failure reason 958 * represented by enum qca_chip_power_save_failure_reason 959 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST : Last 960 * @QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX : Max value 961 */ 962 enum qca_attr_chip_power_save_failure { 963 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, 964 965 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, 966 967 /* keep last */ 968 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, 969 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = 970 QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, 971 }; 972 973 974 /** 975 * enum qca_wlan_vendor_attr_tdls_get_status - tdls get status attribute 976 * 977 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID: Invalid initial value 978 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR: An array of 6 x Unsigned 979 * 8-bit value 980 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE: get status state, 981 * unsigned 32-bit value 982 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON: get status reason 983 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL: get status channel, 984 * unsigned 32-bit value 985 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS: get operating 986 * class, unsigned 32-bit value 987 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST: After last 988 * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX: Max value 989 */ 990 enum qca_wlan_vendor_attr_tdls_get_status { 991 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID = 0, 992 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR, 993 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE, 994 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON, 995 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL, 996 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS, 997 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST, 998 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX = 999 QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST - 1, 1000 }; 1001 1002 /** 1003 * enum qca_wlan_vendor_attr_tdls_state - tdls state attribute 1004 * 1005 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID: Initial invalid value 1006 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR: An array of 6 x Unsigned 1007 * 8-bit value 1008 * @QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE: TDLS new state, 1009 * unsigned 32-bit value 1010 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON: TDLS state reason 1011 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL: TDLS state channel, 1012 * unsigned 32-bit value 1013 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS: TDLS state 1014 * operating class, unsigned 32-bit value 1015 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST: After last 1016 * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX: Max value 1017 */ 1018 enum qca_wlan_vendor_attr_tdls_state { 1019 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID = 0, 1020 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR, 1021 QCA_WLAN_VENDOR_ATTR_TDLS_NEW_STATE, 1022 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON, 1023 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL, 1024 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS, 1025 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST, 1026 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX = 1027 QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST - 1, 1028 }; 1029 1030 /* enum's to provide TDLS capabilities */ 1031 enum qca_wlan_vendor_attr_get_tdls_capabilities { 1032 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0, 1033 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS = 1, 1034 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED = 2, 1035 1036 /* keep last */ 1037 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST, 1038 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX = 1039 QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1, 1040 }; 1041 1042 enum qca_wlan_vendor_attr { 1043 QCA_WLAN_VENDOR_ATTR_INVALID = 0, 1044 /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ 1045 QCA_WLAN_VENDOR_ATTR_DFS = 1, 1046 /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */ 1047 QCA_WLAN_VENDOR_ATTR_NAN = 2, 1048 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 1049 QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, 1050 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 1051 QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, 1052 /* 1053 * used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined 1054 * by enum qca_roaming_policy. 1055 */ 1056 QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, 1057 QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, 1058 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 1059 QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, 1060 QCA_WLAN_VENDOR_ATTR_TEST = 8, 1061 /* 1062 * used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES 1063 * Unsigned 32-bit value. 1064 */ 1065 QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9, 1066 /* Unsigned 32-bit value */ 1067 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10, 1068 /* Unsigned 32-bit value */ 1069 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11, 1070 /* Unsigned 32-bit value from enum qca_set_band. */ 1071 QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12, 1072 /* Dummy (NOP) attribute for 64 bit padding */ 1073 QCA_WLAN_VENDOR_ATTR_PAD = 13, 1074 /* 1075 * Unique FTM session cookie (Unsigned 64 bit). Specified in 1076 * QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in 1077 * the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and 1078 * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE. 1079 */ 1080 QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14, 1081 /* 1082 * Indoor location capabilities, returned by 1083 * QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA. 1084 * see enum qca_wlan_vendor_attr_loc_capa. 1085 */ 1086 QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15, 1087 /* 1088 * Array of nested attributes containing information about each peer 1089 * in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info 1090 * for supported attributes for each peer. 1091 */ 1092 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16, 1093 /* 1094 * Array of nested attributes containing measurement results for 1095 * one or more peers, reported by the 1096 * QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event. 1097 * See enum qca_wlan_vendor_attr_peer_result for list of supported 1098 * attributes. 1099 */ 1100 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17, 1101 /* Flag attribute for enabling or disabling responder functionality. */ 1102 QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18, 1103 /* 1104 * Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 1105 * command to specify the LCI report that will be sent by 1106 * the responder during a measurement exchange. The format is 1107 * defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10. 1108 */ 1109 QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19, 1110 /* 1111 * Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 1112 * command to specify the location civic report that will 1113 * be sent by the responder during a measurement exchange. 1114 * The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13. 1115 */ 1116 QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20, 1117 /* 1118 * Session/measurement completion status code, 1119 * reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and 1120 * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT 1121 * see enum qca_vendor_attr_loc_session_status. 1122 */ 1123 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21, 1124 /* 1125 * Initial dialog token used by responder (0 if not specified), 1126 * unsigned 8 bit value. 1127 */ 1128 QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22, 1129 /* 1130 * AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS 1131 * and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if 1132 * AOA measurements are needed as part of an FTM session. 1133 * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See 1134 * enum qca_wlan_vendor_attr_aoa_type. 1135 */ 1136 QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23, 1137 /* 1138 * A bit mask (unsigned 32 bit value) of antenna arrays used 1139 * by indoor location measurements. Refers to the antenna 1140 * arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS. 1141 */ 1142 QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24, 1143 /* 1144 * AOA measurement data. Its contents depends on the AOA measurement 1145 * type and antenna array mask: 1146 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values, 1147 * phase of the strongest CIR path for each antenna in the measured 1148 * array(s). 1149 * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16 1150 * values, phase and amplitude of the strongest CIR path for each 1151 * antenna in the measured array(s). 1152 */ 1153 QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, 1154 /* 1155 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1156 * to specify the chain number (unsigned 32 bit value) to inquire 1157 * the corresponding antenna RSSI value */ 1158 QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26, 1159 /* 1160 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1161 * to report the specific antenna RSSI value (unsigned 32 bit value) */ 1162 QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27, 1163 /* Frequency in MHz, various uses. Unsigned 32 bit value */ 1164 QCA_WLAN_VENDOR_ATTR_FREQ = 28, 1165 /* 1166 * TSF timer value, unsigned 64 bit value. 1167 * May be returned by various commands. 1168 */ 1169 QCA_WLAN_VENDOR_ATTR_TSF = 29, 1170 /* 1171 * DMG RF sector index, unsigned 16 bit number. Valid values are 1172 * 0..127 for sector indices or 65535 as special value used to 1173 * unlock sector selection in 1174 * QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR. 1175 */ 1176 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30, 1177 /* 1178 * DMG RF sector type, unsigned 8 bit value. One of the values 1179 * in enum qca_wlan_vendor_attr_dmg_rf_sector_type. 1180 */ 1181 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31, 1182 /* 1183 * Bitmask of DMG RF modules for which information is requested. Each 1184 * bit corresponds to an RF module with the same index as the bit 1185 * number. Unsigned 32 bit number but only low 8 bits can be set since 1186 * all DMG chips currently have up to 8 RF modules. 1187 */ 1188 QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32, 1189 /* 1190 * Array of nested attributes where each entry is DMG RF sector 1191 * configuration for a single RF module. 1192 * Attributes for each entry are taken from enum 1193 * qca_wlan_vendor_attr_dmg_rf_sector_cfg. 1194 * Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG 1195 * and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG. 1196 */ 1197 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33, 1198 /* 1199 * Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command 1200 * to report frame aggregation statistics to userspace. 1201 */ 1202 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34, 1203 QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35, 1204 /* 1205 * Unsigned 8-bit value representing MBO transition reason code as 1206 * provided by the AP used by subcommand 1207 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is 1208 * specified by the userspace in the request to the driver. 1209 */ 1210 QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36, 1211 /* 1212 * Array of nested attributes, BSSID and status code, used by subcommand 1213 * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each 1214 * entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info. 1215 * The userspace space specifies the list/array of candidate BSSIDs in 1216 * the order of preference in the request. The driver specifies the 1217 * status code, for each BSSID in the list, in the response. The 1218 * acceptable candidates are listed in the order preferred by the 1219 * driver. 1220 */ 1221 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37, 1222 /* 1223 * Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command 1224 * See enum qca_wlan_vendor_attr_brp_ant_limit_mode. 1225 */ 1226 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE = 38, 1227 /* 1228 * Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command 1229 * to define the number of antennas to use for BRP. 1230 * different purpose in each ANT_LIMIT_MODE: 1231 * DISABLE - ignored 1232 * EFFECTIVE - upper limit to number of antennas to be used 1233 * FORCE - exact number of antennas to be used 1234 * unsigned 8 bit value 1235 */ 1236 QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39, 1237 /* 1238 * Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command 1239 * to report the corresponding antenna index to the chain RSSI value 1240 */ 1241 QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40, 1242 1243 /* keep last */ 1244 QCA_WLAN_VENDOR_ATTR_AFTER_LAST, 1245 QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1 1246 }; 1247 1248 #ifdef FEATURE_WLAN_EXTSCAN 1249 enum qca_wlan_vendor_attr_extscan_config_params { 1250 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0, 1251 1252 /* Unsigned 32-bit value */ 1253 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1, 1254 1255 /* 1256 * Attributes for data used by 1257 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS sub command. 1258 */ 1259 1260 /* Unsigned 32-bit value */ 1261 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND 1262 = 2, 1263 /* Unsigned 32-bit value */ 1264 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS 1265 = 3, 1266 1267 /* 1268 * Attributes for input params used by 1269 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_START sub command. 1270 */ 1271 1272 /* Unsigned 32-bit value; channel frequency */ 1273 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CHANNEL = 4, 1274 /* Unsigned 32-bit value; dwell time in ms. */ 1275 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_DWELL_TIME = 5, 1276 /* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */ 1277 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_PASSIVE = 6, 1278 /* Unsigned 8-bit value; channel class */ 1279 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_CLASS = 7, 1280 1281 /* Unsigned 8-bit value; bucket index, 0 based */ 1282 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_INDEX = 8, 1283 /* Unsigned 8-bit value; band. */ 1284 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BAND = 9, 1285 /* Unsigned 32-bit value; desired period, in ms. */ 1286 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_PERIOD = 10, 1287 /* Unsigned 8-bit value; report events semantics. */ 1288 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_REPORT_EVENTS = 11, 1289 /* 1290 * Unsigned 32-bit value. Followed by a nested array of 1291 * EXTSCAN_CHANNEL_SPEC_* attributes. 1292 */ 1293 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12, 1294 1295 /* 1296 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC_* attributes. 1297 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 1298 */ 1299 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CHANNEL_SPEC = 13, 1300 1301 /* Unsigned 32-bit value; base timer period in ms. */ 1302 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14, 1303 /* 1304 * Unsigned 32-bit value; number of APs to store in each scan in the 1305 * BSSID/RSSI history buffer (keep the highest RSSI APs). 1306 */ 1307 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15, 1308 /* 1309 * Unsigned 8-bit value; in %, when scan buffer is this much full, wake 1310 * up AP. 1311 */ 1312 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT 1313 = 16, 1314 1315 /* 1316 * Unsigned 8-bit value; number of scan bucket specs; followed by a 1317 * nested array of_EXTSCAN_BUCKET_SPEC_* attributes and values. The size 1318 * of the array is determined by NUM_BUCKETS. 1319 */ 1320 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17, 1321 1322 /* 1323 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_* attributes. 1324 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS 1325 */ 1326 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC = 18, 1327 1328 /* Unsigned 8-bit value */ 1329 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH 1330 = 19, 1331 /* Unsigned 32-bit value; maximum number of results to be returned. */ 1332 QCA_WLAN_VENDOR_ATTR_EXTSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX 1333 = 20, 1334 1335 /* An array of 6 x unsigned 8-bit value */ 1336 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_BSSID = 21, 1337 /* Signed 32-bit value */ 1338 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22, 1339 /* Signed 32-bit value */ 1340 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23, 1341 /* Unsigned 32-bit value */ 1342 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24, 1343 1344 /* 1345 * Number of hotlist APs as unsigned 32-bit value, followed by a nested 1346 * array of AP_THRESHOLD_PARAM attributes and values. The size of the 1347 * array is determined by NUM_AP. 1348 */ 1349 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25, 1350 1351 /* 1352 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM_* attributes. 1353 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS 1354 */ 1355 QCA_WLAN_VENDOR_ATTR_EXTSCAN_AP_THRESHOLD_PARAM = 26, 1356 1357 /* Unsigned 32-bit value; number of samples for averaging RSSI. */ 1358 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE 1359 = 27, 1360 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 1361 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE 1362 = 28, 1363 /* Unsigned 32-bit value; number of APs breaching threshold. */ 1364 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29, 1365 /* 1366 * Unsigned 32-bit value; number of APs. Followed by an array of 1367 * AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP. 1368 */ 1369 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30, 1370 /* Unsigned 32-bit value; number of samples to confirm AP loss. */ 1371 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE 1372 = 31, 1373 /* 1374 * Unsigned 32-bit value. If max_period is non zero or different than 1375 * period, then this bucket is an exponential backoff bucket. 1376 */ 1377 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_MAX_PERIOD = 32, 1378 /* Unsigned 32-bit value. */ 1379 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_BASE = 33, 1380 /* 1381 * Unsigned 32-bit value. For exponential back off bucket, number of 1382 * scans to perform for a given period. 1383 */ 1384 QCA_WLAN_VENDOR_ATTR_EXTSCAN_BUCKET_SPEC_STEP_COUNT = 34, 1385 /* 1386 * Unsigned 8-bit value; in number of scans, wake up AP after these 1387 * many scans. 1388 */ 1389 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS 1390 = 35, 1391 1392 /* 1393 * Attributes for data used by 1394 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_SSID_HOTLIST sub command. 1395 */ 1396 1397 /* Unsigned 3-2bit value; number of samples to confirm SSID loss. */ 1398 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE 1399 = 36, 1400 /* 1401 * Number of hotlist SSIDs as unsigned 32-bit value, followed by a 1402 * nested array of SSID_THRESHOLD_PARAM_* attributes and values. The 1403 * size of the array is determined by NUM_SSID. 1404 */ 1405 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37, 1406 /* 1407 * Array of QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_* 1408 * attributes. 1409 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_HOTLIST_PARAMS_NUM_SSID 1410 */ 1411 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM = 38, 1412 1413 /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ 1414 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_SSID = 39, 1415 /* Unsigned 8-bit value */ 1416 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_BAND = 40, 1417 /* Signed 32-bit value */ 1418 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41, 1419 /* Signed 32-bit value */ 1420 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42, 1421 /* Unsigned 32-bit value; a bitmask with additional extscan config flag. 1422 */ 1423 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CONFIGURATION_FLAGS = 43, 1424 1425 /* keep last */ 1426 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST, 1427 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_MAX = 1428 QCA_WLAN_VENDOR_ATTR_EXTSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1, 1429 }; 1430 1431 enum qca_wlan_vendor_attr_extscan_results { 1432 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_INVALID = 0, 1433 1434 /* 1435 * Unsigned 32-bit value; must match the request Id supplied by 1436 * Wi-Fi HAL in the corresponding subcmd NL msg. 1437 */ 1438 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_REQUEST_ID = 1, 1439 1440 /* 1441 * Unsigned 32-bit value; used to indicate the status response from 1442 * firmware/driver for the vendor sub-command. 1443 */ 1444 QCA_WLAN_VENDOR_ATTR_EXTSCAN_STATUS = 2, 1445 1446 /* 1447 * EXTSCAN Valid Channels attributes */ 1448 /* Unsigned 32bit value; followed by a nested array of CHANNELS. */ 1449 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_CHANNELS = 3, 1450 /* 1451 * An array of NUM_CHANNELS x unsigned 32-bit value integers 1452 * representing channel numbers. 1453 */ 1454 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CHANNELS = 4, 1455 1456 /* EXTSCAN Capabilities attributes */ 1457 1458 /* Unsigned 32-bit value */ 1459 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5, 1460 /* Unsigned 32-bit value */ 1461 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6, 1462 /* Unsigned 32-bit value */ 1463 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN 1464 = 7, 1465 /* Unsigned 32-bit value */ 1466 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE 1467 = 8, 1468 /* Signed 32-bit value */ 1469 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD 1470 = 9, 1471 /* Unsigned 32-bit value */ 1472 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10, 1473 /* Unsigned 32-bit value */ 1474 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS 1475 = 11, 1476 /* Unsigned 32-bit value */ 1477 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES 1478 = 12, 1479 1480 /* 1481 * EXTSCAN Attributes used with 1482 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_RESULTS_AVAILABLE sub-command. 1483 */ 1484 1485 /* Unsigned 32-bit value */ 1486 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13, 1487 1488 /* 1489 * EXTSCAN attributes used with 1490 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_FULL_SCAN_RESULT sub-command. 1491 */ 1492 1493 /* 1494 * An array of NUM_RESULTS_AVAILABLE x 1495 * QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_* 1496 */ 1497 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST = 14, 1498 1499 /* Unsigned 64-bit value; age of sample at the time of retrieval */ 1500 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15, 1501 /* 33 x unsigned 8-bit value; NULL terminated SSID */ 1502 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_SSID = 16, 1503 /* An array of 6 x unsigned 8-bit value */ 1504 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BSSID = 17, 1505 /* Unsigned 32-bit value; channel frequency in MHz */ 1506 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18, 1507 /* Signed 32-bit value */ 1508 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RSSI = 19, 1509 /* Unsigned 32-bit value */ 1510 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT = 20, 1511 /* Unsigned 32-bit value */ 1512 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21, 1513 /* Unsigned 16-bit value */ 1514 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22, 1515 /* Unsigned 16-bit value */ 1516 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23, 1517 /* Unsigned 32-bit value; size of the IE DATA blob */ 1518 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24, 1519 /* 1520 * An array of IE_LENGTH x unsigned 8-bit value; blob of all the 1521 * information elements found in the beacon; this data should be a 1522 * packed list of wifi_information_element objects, one after the 1523 * other. 1524 */ 1525 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25, 1526 1527 /* 1528 * Unsigned 8-bit value; set by driver to indicate more scan results are 1529 * available. 1530 */ 1531 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26, 1532 1533 /* 1534 * EXTSCAN attributes for 1535 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SCAN_EVENT sub-command. 1536 */ 1537 /* Unsigned 8-bit value */ 1538 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_TYPE = 27, 1539 /* Unsigned 32-bit value */ 1540 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SCAN_EVENT_STATUS = 28, 1541 1542 /* 1543 * EXTSCAN attributes for 1544 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_HOTLIST_AP_FOUND sub-command. 1545 */ 1546 /* 1547 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1548 * to indicate number of results. 1549 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the 1550 * list of results. 1551 */ 1552 1553 /* 1554 * EXTSCAN attributes for 1555 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SIGNIFICANT_CHANGE sub-command. 1556 */ 1557 /* An array of 6 x unsigned 8-bit value */ 1558 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29, 1559 /* Unsigned 32-bit value */ 1560 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL 1561 = 30, 1562 /* Unsigned 32-bit value. */ 1563 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI 1564 = 31, 1565 /* 1566 * A nested array of signed 32-bit RSSI values. Size of the array is 1567 * determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI. 1568 */ 1569 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST 1570 = 32, 1571 1572 /* 1573 * EXTSCAN attributes used with 1574 * QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_CACHED_RESULTS sub-command. 1575 */ 1576 /* 1577 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1578 * to indicate number of extscan cached results returned. 1579 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST to indicate 1580 * the list of extscan cached results. 1581 */ 1582 1583 /* 1584 * An array of NUM_RESULTS_AVAILABLE x 1585 * QCA_NL80211_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_* 1586 */ 1587 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_LIST = 33, 1588 /* Unsigned 32-bit value; a unique identifier for the scan unit. */ 1589 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_SCAN_ID = 34, 1590 /* 1591 * Unsigned 32-bit value; a bitmask w/additional information about scan. 1592 */ 1593 QCA_WLAN_VENDOR_ATTR_EXTSCAN_CACHED_RESULTS_FLAGS = 35, 1594 /* 1595 * Use attr QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE 1596 * to indicate number of wifi scan results/bssids retrieved by the scan. 1597 * Also, use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the 1598 * list of wifi scan results returned for each cached result block. 1599 */ 1600 1601 /* 1602 * EXTSCAN attributes for 1603 * QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command. 1604 */ 1605 /* 1606 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE for 1607 * number of results. 1608 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested 1609 * list of wifi scan results returned for each 1610 * wifi_passpoint_match_result block. 1611 * Array size: QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_NUM_RESULTS_AVAILABLE. 1612 */ 1613 1614 /* 1615 * EXTSCAN attributes for 1616 * QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command. 1617 */ 1618 /* Unsigned 32-bit value */ 1619 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES 1620 = 36, 1621 /* 1622 * A nested array of 1623 * QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_* 1624 * attributes. Array size = 1625 * *_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES. 1626 */ 1627 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37, 1628 1629 /* Unsigned 32-bit value; network block id for the matched network */ 1630 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38, 1631 /* 1632 * Use QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_LIST to indicate the nested 1633 * list of wifi scan results returned for each 1634 * wifi_passpoint_match_result block. 1635 */ 1636 /* Unsigned 32-bit value */ 1637 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39, 1638 /* 1639 * An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values; 1640 * ANQP data in the information_element format. 1641 */ 1642 QCA_WLAN_VENDOR_ATTR_EXTSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40, 1643 1644 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1645 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41, 1646 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1647 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42, 1648 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1649 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID 1650 = 43, 1651 /* Unsigned 32-bit value; a EXTSCAN Capabilities attribute. */ 1652 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID 1653 = 44, 1654 1655 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_BUCKETS_SCANNED = 45, 1656 QCA_WLAN_VENDOR_ATTR_EXTSCAN_MAX_NUM_BLACKLISTED_BSSID = 46, 1657 1658 /* keep last */ 1659 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST, 1660 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_MAX = 1661 QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST - 1, 1662 }; 1663 #endif 1664 1665 #ifdef WLAN_FEATURE_LINK_LAYER_STATS 1666 1667 /** 1668 * enum qca_wlan_vendor_attr_ll_stats_set - vendor attribute set stats 1669 * 1670 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID: Invalid initial value 1671 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD: Size threshold 1672 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING: 1673 * Aggresive stats gathering 1674 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST: After last 1675 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX: Max value 1676 */ 1677 enum qca_wlan_vendor_attr_ll_stats_set { 1678 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0, 1679 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1, 1680 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING, 1681 /* keep last */ 1682 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST, 1683 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX = 1684 QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1 1685 }; 1686 1687 /** 1688 * enum qca_wlan_vendor_attr_ll_stats_get - vendor attribute get stats 1689 * 1690 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID: Invalid initial value 1691 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID: Unsigned 32bit value 1692 * provided by the caller issuing the GET stats command. When reporting 1693 * the stats results, the driver uses the same value to indicate which 1694 * GET request the results correspond to. 1695 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK: Get config request mask 1696 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask 1697 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response 1698 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST: After last 1699 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX: Max value 1700 */ 1701 enum qca_wlan_vendor_attr_ll_stats_get { 1702 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0, 1703 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID, 1704 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK, 1705 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST, 1706 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX = 1707 QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1 1708 }; 1709 1710 /** 1711 * enum qca_wlan_vendor_attr_ll_stats_clr - vendor attribute clear stats 1712 * 1713 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID: Invalid initial value 1714 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK: Config request mask 1715 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ: Config stop mask 1716 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK: Config response mask 1717 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP: Config stop response 1718 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST: After last 1719 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX: Max value 1720 */ 1721 enum qca_wlan_vendor_attr_ll_stats_clr { 1722 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0, 1723 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK, 1724 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ, 1725 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK, 1726 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP, 1727 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST, 1728 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX = 1729 QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1 1730 }; 1731 1732 /** 1733 * enum qca_wlan_vendor_attr_ll_stats_results_type - ll stats result type 1734 * 1735 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID: Initial invalid value 1736 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO: Link layer stats type radio 1737 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE: Link layer stats type interface 1738 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER: Link layer stats type peer 1739 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST: Last value 1740 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX: Max value 1741 */ 1742 enum qca_wlan_vendor_attr_ll_stats_results_type { 1743 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_INVALID = 0, 1744 1745 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO = 1, 1746 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_IFACE, 1747 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_PEER, 1748 1749 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST, 1750 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_MAX = 1751 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_AFTER_LAST - 1 1752 }; 1753 1754 /** 1755 * enum qca_wlan_vendor_attr_ll_stats_results - vendor attribute stats results 1756 * 1757 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are nested 1758 * within the interface stats. 1759 * 1760 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could be nested 1761 * within the interface stats. 1762 * 1763 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are nested 1764 * within the interface stats. 1765 * 1766 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* could be nested 1767 * within the peer info stats. 1768 * 1769 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could be 1770 * nested within the channel stats. 1771 * 1772 * Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ could be nested 1773 * within the radio stats. 1774 * 1775 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID: Invalid initial value 1776 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID: Unsigned 32bit value 1777 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX: Unsigned 32bit value 1778 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX: Unsigned 32bit value 1779 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX: Unsigned 32bit value 1780 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX: Unsigned 32bit value 1781 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT: Unsigned 32bit value 1782 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA: Unsigned 32bit value 1783 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK: Unsigned 32bit value 1784 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE: Interface mode, e.g., STA, 1785 * SOFTAP, IBSS, etc. Type = enum wifi_interface_mode 1786 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR: Interface MAC address. 1787 * An array of 6 Unsigned int8_t 1788 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE: 1789 * Type = enum wifi_connection_state, e.g., DISCONNECTED, AUTHENTICATING, 1790 * etc. Valid for STA, CLI only 1791 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING: 1792 * Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE 1793 * (is that valid for STA only?) 1794 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES: Unsigned 32bit value. 1795 * WIFI_CAPABILITY_XXX 1796 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID: NULL terminated SSID. An 1797 * array of 33 Unsigned 8bit values 1798 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID: BSSID. An array of 6 1799 * Unsigned 8bit values 1800 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR: Country string 1801 * advertised by AP. An array of 3 Unsigned 8bit values 1802 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR: Country string for 1803 * this association. An array of 3 Unsigned 8bit values 1804 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC: Type = enum wifi_traffic_ac e.g. 1805 * V0, VI, BE and BK 1806 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU: Unsigned int 32 value 1807 * corresponding to respective AC 1808 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU: Unsigned int 32 value 1809 * corresponding to respective AC 1810 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST: Unsigned int 32 value 1811 * corresponding to respective AC 1812 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST: Unsigned int 32 value 1813 * corresponding to respective AC 1814 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU: Unsigned int 32 value 1815 * corresponding to respective AC 1816 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU: Unsigned int 32 value 1817 * corresponding to respective AC 1818 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST: Unsigned int 32 value 1819 * corresponding to respective AC 1820 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES: Unsigned int 32 value 1821 * corresponding to respective AC 1822 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT: Unsigned int 32 value 1823 * corresponding to respective AC 1824 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN: Unsigned int 32 1825 * value corresponding to respective AC 1826 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX: Unsigned int 32 1827 * value corresponding to respective AC 1828 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG: Unsigned int 32 1829 * value corresponding to respective AC 1830 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES: Unsigned int 32 1831 * value corresponding to respective AC 1832 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS: Unsigned int 32 1833 * value corresponding to respective AC 1834 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE: Type = enum wifi_peer_type 1835 * Peer type, e.g., STA, AP, P2P GO etc 1836 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS: MAC addr corresponding 1837 * to respective peer. An array of 6 Unsigned 8bit values 1838 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES: Unsigned int 32bit 1839 * value representing capabilities corresponding to respective peer. 1840 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES: Unsigned 32bit value. 1841 * Number of rates 1842 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE: Unsigned int 8bit value: 1843 * 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved 1844 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS: Unsigned int 8bit value: 1845 * 0:1x1, 1:2x2, 3:3x3, 4:4x4 1846 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW: Unsigned int 8bit value: 1847 * 0:20MHz, 1:40Mhz, 2:80Mhz, 3:160Mhz 1848 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX: Unsigned int 8bit value: 1849 * OFDM/CCK rate code would be as per IEEE Std in the units of 0.5mbps 1850 * HT/VHT it would be mcs index 1851 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE: Unsigned 32bit value. 1852 * Bit rate in units of 100Kbps 1853 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU: Unsigned int 32bit value. 1854 * Number of successfully transmitted data pkts i.e., with ACK received 1855 * corresponding to the respective rate 1856 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU: Unsigned int 32bit value. 1857 * Number of received data pkts corresponding to the respective rate 1858 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST: Unsigned int 32bit value. 1859 * Number of data pkts losses, i.e., no ACK received corresponding to 1860 * the respective rate 1861 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES: Unsigned int 32bit value. 1862 * Total number of data pkt retries for the respective rate 1863 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT: Unsigned int 32bit value. 1864 * Total number of short data pkt retries for the respective rate 1865 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG: Unsigned int 32bit value. 1866 * Total number of long data pkt retries for the respective rate 1867 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID: Radio id 1868 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME: Unsigned 32bit value. 1869 * Total number of msecs the radio is awake accruing over time 1870 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME: Unsigned 32bit value. 1871 * Total number of msecs the radio is transmitting accruing over time 1872 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME: Unsigned 32bit value. 1873 * Total number of msecs the radio is in active receive accruing over time 1874 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN: Unsigned 32bit value. 1875 * Total number of msecs the radio is awake due to all scan accruing 1876 * over time 1877 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD: Unsigned 32bit value. 1878 * Total number of msecs the radio is awake due to NAN accruing over time. 1879 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN: Unsigned 32bit value. 1880 * Total number of msecs the radio is awake due to GSCAN accruing over time 1881 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN: Unsigned 32bit value. 1882 * Total number of msecs the radio is awake due to roam scan accruing over 1883 * time. 1884 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN: Unsigned 32bit value. 1885 * Total number of msecs the radio is awake due to PNO scan accruing over 1886 * time. 1887 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20: Unsigned 32bit value. 1888 * Total number of msecs the radio is awake due to HS2.0 scans and GAS 1889 * exchange accruing over time. 1890 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS: Unsigned 32bit value. 1891 * Number of channels 1892 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH: 1893 * Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80, etc. 1894 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ: 1895 * Unsigned 32bit value. Primary 20MHz channel. 1896 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0: 1897 * Unsigned 32bit value. Center frequency (MHz) first segment. 1898 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1: 1899 * Unsigned 32bit value. Center frequency (MHz) second segment. 1900 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME: Unsigned int 32bit value 1901 * representing total number of msecs the radio is awake on that channel 1902 * accruing over time, corresponding to the respective channel. 1903 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME: Unsigned int 32bit 1904 * value representing total number of msecs the CCA register is busy 1905 * accruing over time corresponding to the respective channel. 1906 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS: Number of radios 1907 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO: Channel info 1908 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO: Peer info 1909 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO: Peer rate info 1910 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO: WMM info 1911 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA: Unsigned 8bit value. 1912 * Used by the driver; if set to 1, it indicates that more stats, e.g., 1913 * peers or radio, are to follow in the next 1914 * QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event. Otherwise, it 1915 * is set to 0. 1916 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET: tsf offset 1917 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED: leaky ap detected 1918 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED: 1919 * average number of frames leaked 1920 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME: guard time 1921 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE: Link Layer stats type 1922 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS: LL Radio Number of 1923 * Tx Levels 1924 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL:Number of msecs the 1925 * radio spent in transmitting for each power level 1926 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT: RTS successful count 1927 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT: RTS fail count 1928 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT: PPDU successful count 1929 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT: PPDU fail count 1930 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST: After last 1931 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value 1932 */ 1933 1934 enum qca_wlan_vendor_attr_ll_stats_results { 1935 QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0, 1936 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1, 1937 1938 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2, 1939 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3, 1940 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4, 1941 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5, 1942 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6, 1943 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7, 1944 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8, 1945 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9, 1946 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10, 1947 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11, 1948 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12, 1949 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13, 1950 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14, 1951 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15, 1952 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16, 1953 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17, 1954 1955 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18, 1956 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19, 1957 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20, 1958 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21, 1959 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22, 1960 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23, 1961 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24, 1962 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25, 1963 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26, 1964 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27, 1965 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28, 1966 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29, 1967 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30, 1968 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31, 1969 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32, 1970 1971 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33, 1972 1973 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34, 1974 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35, 1975 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36, 1976 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37, 1977 1978 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38, 1979 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39, 1980 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40, 1981 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41, 1982 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42, 1983 1984 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43, 1985 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44, 1986 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45, 1987 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46, 1988 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47, 1989 QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48, 1990 1991 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49, 1992 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50, 1993 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51, 1994 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52, 1995 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53, 1996 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54, 1997 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55, 1998 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56, 1999 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57, 2000 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58, 2001 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59, 2002 2003 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60, 2004 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61, 2005 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62, 2006 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63, 2007 2008 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64, 2009 QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65, 2010 2011 QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66, 2012 QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67, 2013 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68, 2014 QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69, 2015 QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70, 2016 2017 QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71, 2018 2019 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72, 2020 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73, 2021 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74, 2022 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75, 2023 2024 QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76, 2025 2026 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77, 2027 2028 QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78, 2029 2030 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79, 2031 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80, 2032 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81, 2033 QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82, 2034 2035 /* keep last */ 2036 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST, 2037 QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX = 2038 QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1 2039 }; 2040 2041 enum qca_wlan_vendor_attr_ll_stats_type { 2042 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0, 2043 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1, 2044 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2, 2045 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3, 2046 2047 /* keep last */ 2048 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST, 2049 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX = 2050 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1, 2051 }; 2052 2053 #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ 2054 2055 /** 2056 * enum qca_wlan_vendor_attr_get_supported_features - get supported feature 2057 * 2058 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID: Invalid initial value 2059 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET: Unsigned 32bit value 2060 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST: After last 2061 * @QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX: Max value 2062 */ 2063 enum qca_wlan_vendor_attr_get_supported_features { 2064 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_INVALID = 0, 2065 QCA_WLAN_VENDOR_ATTR_FEATURE_SET = 1, 2066 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST, 2067 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_MAX = 2068 QCA_WLAN_VENDOR_ATTR_FEATURE_SET_AFTER_LAST - 1, 2069 }; 2070 2071 /** 2072 * enum qca_wlan_vendor_attr_set_scanning_mac_oui - set scanning mac oui 2073 * 2074 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID: Invalid initial value 2075 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI: An array of 3 x Unsigned 8-bit 2076 * value 2077 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST: After last 2078 * @QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX: Max value 2079 */ 2080 enum qca_wlan_vendor_attr_set_scanning_mac_oui { 2081 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_INVALID = 0, 2082 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI = 1, 2083 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST, 2084 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_MAX = 2085 QCA_WLAN_VENDOR_ATTR_SET_SCANNING_MAC_OUI_AFTER_LAST - 1, 2086 }; 2087 2088 /** 2089 * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes 2090 * 2091 * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan 2092 * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes 2093 * with frequencies to be scanned (in MHz) 2094 * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned 2095 * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported 2096 * rates to be included 2097 * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests 2098 * at non CCK rate in 2GHz band 2099 * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags 2100 * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the 2101 * driver for the specific scan request 2102 * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan 2103 * request decoded as in enum scan_status 2104 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation 2105 * scan flag is set 2106 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with 2107 * randomisation 2108 * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: BSSID provided to do scan for specific BSS 2109 */ 2110 enum qca_wlan_vendor_attr_scan { 2111 QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0, 2112 QCA_WLAN_VENDOR_ATTR_SCAN_IE, 2113 QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES, 2114 QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS, 2115 QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES, 2116 QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE, 2117 QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS, 2118 QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE, 2119 QCA_WLAN_VENDOR_ATTR_SCAN_STATUS, 2120 QCA_WLAN_VENDOR_ATTR_SCAN_MAC, 2121 QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK, 2122 QCA_WLAN_VENDOR_ATTR_SCAN_BSSID, 2123 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST, 2124 QCA_WLAN_VENDOR_ATTR_SCAN_MAX = 2125 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1 2126 }; 2127 2128 /** 2129 * enum scan_status - Specifies the valid values the vendor scan attribute 2130 * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take 2131 * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with 2132 * new scan results 2133 * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between 2134 */ 2135 enum scan_status { 2136 VENDOR_SCAN_STATUS_NEW_RESULTS, 2137 VENDOR_SCAN_STATUS_ABORTED, 2138 VENDOR_SCAN_STATUS_MAX, 2139 }; 2140 2141 /** 2142 * enum qca_wlan_vendor_attr_get_concurrency_matrix - get concurrency matrix 2143 * 2144 * NL attributes for data used by 2145 * QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX sub command. 2146 * 2147 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID: Invalid initial value 2148 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX: 2149 * Unsigned 32-bit value 2150 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE: 2151 * Unsigned 32-bit value 2152 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET: Set results. An 2153 * array of SET_SIZE x Unsigned 32bit values representing concurrency 2154 * combinations 2155 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST: After last 2156 * @QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX: Max value 2157 */ 2158 enum qca_wlan_vendor_attr_get_concurrency_matrix { 2159 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_INVALID = 0, 2160 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_CONFIG_PARAM_SET_SIZE_MAX 2161 = 1, 2162 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET_SIZE = 2, 2163 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_RESULTS_SET = 3, 2164 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST, 2165 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_MAX = 2166 QCA_WLAN_VENDOR_ATTR_GET_CONCURRENCY_MATRIX_AFTER_LAST - 1, 2167 }; 2168 2169 /** 2170 * enum qca_wlan_vendor_attr_set_no_dfs_flag - vendor attribute set no dfs flag 2171 * 2172 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID: Invalid initial value 2173 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG: Unsigned 32-bit value 2174 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST: After last 2175 * @QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX: Max value 2176 */ 2177 enum qca_wlan_vendor_attr_set_no_dfs_flag { 2178 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_INVALID = 0, 2179 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG = 1, 2180 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST, 2181 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_MAX = 2182 QCA_WLAN_VENDOR_ATTR_SET_NO_DFS_FLAG_AFTER_LAST - 1, 2183 }; 2184 2185 /** 2186 * enum qca_vendor_attr_wisa_cmd 2187 * @QCA_WLAN_VENDOR_ATTR_WISA_INVALID: Invalid attr 2188 * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value attr (u32) 2189 * @QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST: After last 2190 * @QCA_WLAN_VENDOR_ATTR_WISA_MAX: Max Value 2191 * WISA setup vendor commands 2192 */ 2193 enum qca_vendor_attr_wisa_cmd { 2194 QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0, 2195 QCA_WLAN_VENDOR_ATTR_WISA_MODE, 2196 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST, 2197 QCA_WLAN_VENDOR_ATTR_WISA_MAX = 2198 QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1 2199 }; 2200 2201 enum qca_roaming_policy { 2202 QCA_ROAMING_NOT_ALLOWED, 2203 QCA_ROAMING_ALLOWED_WITHIN_ESS, 2204 }; 2205 2206 /** 2207 * enum qca_wlan_vendor_attr_roam_auth - vendor event for roaming 2208 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID: BSSID of the roamed AP 2209 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE: Request IE 2210 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE: Response IE 2211 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED: Authorization Status 2212 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR: Replay Counter 2213 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK: KCK of the PTK 2214 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK: KEK of the PTK 2215 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS: subnet change status 2216 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS: 2217 * Indicates the status of re-association requested by user space for 2218 * the BSSID specified by QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID. 2219 * Type u16. 2220 * Represents the status code from AP. Use 2221 * %WLAN_STATUS_UNSPECIFIED_FAILURE if the device cannot give you the 2222 * real status code for failures. 2223 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION: 2224 * This attribute indicates that the old association was maintained when 2225 * a re-association is requested by user space and that re-association 2226 * attempt fails (i.e., cannot connect to the requested BSS, but can 2227 * remain associated with the BSS with which the association was in 2228 * place when being requested to roam). Used along with 2229 * WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS to indicate the current 2230 * re-association status. Type flag. 2231 * This attribute is applicable only for re-association failure cases. 2232 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK: AUTH PMK 2233 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID: AUTH PMKID 2234 * @QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM: FILS erp next 2235 * seq number 2236 */ 2237 enum qca_wlan_vendor_attr_roam_auth { 2238 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, 2239 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, 2240 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, 2241 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, 2242 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, 2243 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, 2244 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, 2245 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, 2246 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS, 2247 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS, 2248 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION, 2249 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK, 2250 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID, 2251 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM, 2252 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, 2253 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = 2254 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 2255 }; 2256 2257 /** 2258 * enum qca_wlan_vendor_attr_wifi_config - wifi config 2259 * 2260 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID: Invalid initial value 2261 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM: dynamic DTIM 2262 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR: avg factor 2263 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME: guard time 2264 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST: after last 2265 * @QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX: max value 2266 */ 2267 enum qca_wlan_vendor_attr_wifi_config { 2268 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_INVALID = 0, 2269 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_DYNAMIC_DTIM = 1, 2270 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_STATS_AVG_FACTOR = 2, 2271 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_GUARD_TIME = 3, 2272 2273 /* keep last */ 2274 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST, 2275 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_MAX = 2276 QCA_WLAN_VENDOR_ATTR_WIFI_CONFIG_AFTER_LAST - 1, 2277 }; 2278 2279 /** 2280 * enum qca_wlan_epno_type - the type of request to the EPNO command 2281 * @QCA_WLAN_EPNO: epno type request 2282 * @QCA_WLAN_PNO: pno type request 2283 */ 2284 enum qca_wlan_epno_type { 2285 QCA_WLAN_EPNO, 2286 QCA_WLAN_PNO 2287 }; 2288 2289 /** 2290 * enum qca_wlan_vendor_attr_pno_config_params - pno config params 2291 * 2292 * @QCA_WLAN_VENDOR_ATTR_PNO_INVALID - Invalid initial value 2293 * 2294 * NL attributes for data used by 2295 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command. 2296 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM: 2297 * Unsigned 32-bit value; pno passpoint number of networks 2298 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY: 2299 * Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_* 2300 * attributes. Array size = 2301 * QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM. 2302 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID: 2303 * Unsigned 32-bit value; network id 2304 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM: 2305 * An array of 256 x Unsigned 8-bit value; NULL terminated UTF8 encoded 2306 * realm, 0 if unspecified. 2307 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID: 2308 * An array of 16 x Unsigned 32-bit value; roaming consortium ids 2309 * to match, 0 if unspecified. 2310 * @QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN: 2311 * An array of 6 x Unsigned 8-bit value; mcc/mnc combination, 0s if 2312 * unspecified. 2313 * 2314 * NL attributes for data used by 2315 * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command. 2316 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS: 2317 * Unsigned 32-bit value; set pno number of networks 2318 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST: 2319 * Array of nested 2320 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_* 2321 * attributes. Array size = 2322 * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS 2323 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID: 2324 * An array of 33 x Unsigned 8-bit value; NULL terminated SSID 2325 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD: 2326 * Signed 8-bit value; threshold for considering this SSID as found, 2327 * required granularity for this threshold is 4dBm to 8dBm 2328 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS: 2329 * Unsigned 8-bit value; WIFI_PNO_FLAG_XXX 2330 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT: 2331 * Unsigned 8-bit value; auth bit field for matching WPA IE 2332 * @QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE 2333 * Unsigned 8-bit to indicate ePNO type; values from qca_wlan_epno_type 2334 *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST 2335 * Nested attribute to send the channel list 2336 *@QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL 2337 * Unsigned 32-bit value; indicates the Interval between PNO scan 2338 * cycles in msec 2339 *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI 2340 * Signed 32-bit value; minimum 5GHz RSSI for a BSSID to be considered 2341 *@QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI 2342 * Signed 32-bit value; minimum 2.4GHz RSSI for a BSSID to be considered 2343 * This attribute is obsolete now. 2344 *@QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX 2345 * Signed 32-bit value; the maximum score that a network 2346 * can have before bonuses 2347 *@QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS 2348 * Signed 32-bit value; only report when there is a network's 2349 * score this much higher han the current connection 2350 *@QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS 2351 * Signed 32-bit value; score bonus for all networks with 2352 * the same network flag 2353 *@QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS 2354 * Signed 32-bit value; score bonus for networks that are not open 2355 *@QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS 2356 * Signed 32-bit value; 5GHz RSSI score bonus applied to all 2357 * 5GHz networks 2358 *@QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID 2359 * Unsigned 32-bit value, representing the PNO Request ID 2360 * @QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST: After last 2361 * @QCA_WLAN_VENDOR_ATTR_PNO_MAX: max 2362 */ 2363 enum qca_wlan_vendor_attr_pno_config_params { 2364 QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0, 2365 2366 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1, 2367 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2, 2368 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3, 2369 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4, 2370 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5, 2371 QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6, 2372 2373 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7, 2374 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8, 2375 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9, 2376 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD = 10, 2377 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11, 2378 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12, 2379 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13, 2380 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14, 2381 QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15, 2382 QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16, 2383 QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17, 2384 QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18, 2385 QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19, 2386 QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20, 2387 QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21, 2388 QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22, 2389 2390 QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID = 23, 2391 /* keep last */ 2392 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST, 2393 QCA_WLAN_VENDOR_ATTR_PNO_MAX = 2394 QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1, 2395 }; 2396 2397 /** 2398 * enum qca_wlan_vendor_attr_roaming_config_params - roaming config params 2399 * 2400 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID: Invalid initial value 2401 * @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: roaming sub command 2402 * @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Request id 2403 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: 2404 * number of whitelist networks 2405 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: 2406 * Whitelist ssid list 2407 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: 2408 * white list ssid 2409 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: 2410 * 'a' band boost threshold 2411 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: 2412 * 'a' band penalty threshold 2413 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: 2414 * 'a' band boost factor 2415 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: 2416 * 'a' band penalty factor 2417 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: 2418 * 'a' band max boost 2419 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: 2420 * lazy roam histeresys 2421 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: 2422 * alert roam rssi trigger 2423 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: 2424 * set lazy roam enable 2425 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: 2426 * set bssid preference 2427 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: 2428 * set lazy roam number of bssid 2429 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 2430 * set lazy roam bssid 2431 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: 2432 * set lazy roam rssi modifier 2433 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: 2434 * set bssid params 2435 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: 2436 * set bssid params num bssid 2437 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 2438 * set bssid params bssid 2439 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST: After last 2440 * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX: Max 2441 */ 2442 enum qca_wlan_vendor_attr_roaming_config_params { 2443 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0, 2444 2445 QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1, 2446 QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2, 2447 2448 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3, 2449 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4, 2450 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5, 2451 2452 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6, 2453 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7, 2454 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8, 2455 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9, 2456 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10, 2457 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11, 2458 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12, 2459 2460 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13, 2461 2462 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14, 2463 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15, 2464 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16, 2465 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17, 2466 2467 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18, 2468 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19, 2469 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20, 2470 2471 /* keep last */ 2472 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST, 2473 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX = 2474 QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1, 2475 }; 2476 2477 /** 2478 * enum qca_wlan_vendor_attr_roam_subcmd - roam sub commands 2479 * 2480 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID: Invalid initial value 2481 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST: ssid white list 2482 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS: roam params 2483 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM: set lazy roam 2484 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS: set bssid prefs 2485 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS: set bssid params 2486 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID: set blacklist bssid 2487 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST: after last 2488 * @QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX: subcmd max 2489 */ 2490 enum qca_wlan_vendor_attr_roam_subcmd { 2491 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0, 2492 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1, 2493 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_EXTSCAN_ROAM_PARAMS = 2, 2494 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3, 2495 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4, 2496 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5, 2497 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6, 2498 2499 /* KEEP LAST */ 2500 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST, 2501 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX = 2502 QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1, 2503 }; 2504 2505 /** 2506 * enum qca_wlan_vendor_attr_get_wifi_info - wifi driver information 2507 * 2508 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID: Invalid initial value 2509 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: get host driver version 2510 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: ger firmware version 2511 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX - get radio index 2512 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST: after last 2513 * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX: subcmd max 2514 */ 2515 enum qca_wlan_vendor_attr_get_wifi_info { 2516 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0, 2517 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1, 2518 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2, 2519 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3, 2520 2521 /* KEEP LAST */ 2522 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST, 2523 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX = 2524 QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1, 2525 }; 2526 2527 enum qca_wlan_vendor_attr_logger_results { 2528 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0, 2529 2530 /* 2531 * Unsigned 32-bit value; must match the request Id supplied by 2532 * Wi-Fi HAL in the corresponding subcmd NL msg. 2533 */ 2534 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1, 2535 2536 /* 2537 * Unsigned 32-bit value; used to indicate the size of memory 2538 * dump to be allocated. 2539 */ 2540 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2, 2541 2542 /* keep last */ 2543 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST, 2544 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX = 2545 QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1, 2546 }; 2547 2548 /** 2549 * qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel. 2550 * This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS. 2551 */ 2552 enum qca_wlan_vendor_channel_prop_flags { 2553 /* Bits 0, 1, 2, and 3 are reserved */ 2554 2555 /* Turbo channel */ 2556 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4, 2557 /* CCK channel */ 2558 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5, 2559 /* OFDM channel */ 2560 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6, 2561 /* 2.4 GHz spectrum channel. */ 2562 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7, 2563 /* 5 GHz spectrum channel */ 2564 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8, 2565 /* Only passive scan allowed */ 2566 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9, 2567 /* Dynamic CCK-OFDM channel */ 2568 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10, 2569 /* GFSK channel (FHSS PHY) */ 2570 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11, 2571 /* Radar found on channel */ 2572 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12, 2573 /* 11a static turbo channel only */ 2574 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13, 2575 /* Half rate channel */ 2576 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14, 2577 /* Quarter rate channel */ 2578 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15, 2579 /* HT 20 channel */ 2580 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16, 2581 /* HT 40 with extension channel above */ 2582 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17, 2583 /* HT 40 with extension channel below */ 2584 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18, 2585 /* HT 40 intolerant */ 2586 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19, 2587 /* VHT 20 channel */ 2588 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20, 2589 /* VHT 40 with extension channel above */ 2590 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21, 2591 /* VHT 40 with extension channel below */ 2592 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22, 2593 /* VHT 80 channel */ 2594 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23, 2595 /* HT 40 intolerant mark bit for ACS use */ 2596 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24, 2597 /* Channel temporarily blocked due to noise */ 2598 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25, 2599 /* VHT 160 channel */ 2600 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26, 2601 /* VHT 80+80 channel */ 2602 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27, 2603 /* HE 20 channel */ 2604 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE20 = 1 << 28, 2605 /* HE 40 with extension channel above */ 2606 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40PLUS = 1 << 29, 2607 /* HE 40 with extension channel below */ 2608 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS = 1 << 30, 2609 /* HE 40 intolerant */ 2610 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31, 2611 }; 2612 2613 /** 2614 * qca_wlan_vendor_channel_prop_flags_2: This represents the flags for a 2615 * channel, and is a continuation of qca_wlan_vendor_channel_prop_flags. This is 2616 * used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2. 2617 */ 2618 enum qca_wlan_vendor_channel_prop_flags_2 { 2619 /* HE 40 intolerant mark bit for ACS use */ 2620 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOLMARK = 1 << 0, 2621 /* HE 80 channel */ 2622 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80 = 1 << 1, 2623 /* HE 160 channel */ 2624 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE160 = 1 << 2, 2625 /* HE 80+80 channel */ 2626 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80_80 = 1 << 3, 2627 }; 2628 2629 /** 2630 * qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for 2631 * each channel. This is used by 2632 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT. 2633 */ 2634 enum qca_wlan_vendor_channel_prop_flags_ext { 2635 /* Radar found on channel */ 2636 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0, 2637 /* DFS required on channel */ 2638 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1, 2639 /* DFS required on channel for 2nd band of 80+80 */ 2640 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2, 2641 /* If channel has been checked for DFS */ 2642 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3, 2643 /* Excluded in 802.11d */ 2644 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4, 2645 /* Channel Switch Announcement received on this channel */ 2646 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5, 2647 /* Ad-hoc is not allowed */ 2648 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6, 2649 /* Station only channel */ 2650 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7, 2651 /* DFS radar history for slave device (STA mode) */ 2652 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8, 2653 /* DFS CAC valid for slave device (STA mode) */ 2654 QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9, 2655 }; 2656 2657 /** 2658 * qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd 2659 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite 2660 * information to start/stop the NUD statistics collection. 2661 */ 2662 enum qca_attr_nud_stats_set { 2663 QCA_ATTR_NUD_STATS_SET_INVALID = 0, 2664 2665 /* 2666 * Flag to start/stop the NUD statistics collection. 2667 * Start - If included, Stop - If not included 2668 */ 2669 QCA_ATTR_NUD_STATS_SET_START = 1, 2670 /* IPv4 address of the default gateway (in network byte order) */ 2671 QCA_ATTR_NUD_STATS_GW_IPV4 = 2, 2672 /* 2673 * Represents the data packet type to be monitored. 2674 * Host driver tracks the stats corresponding to each data frame 2675 * represented by these flags. 2676 * These data packets are represented by 2677 * enum qca_wlan_vendor_nud_stats_set_data_pkt_info. 2678 */ 2679 QCA_ATTR_NUD_STATS_SET_DATA_PKT_INFO = 3, 2680 /* keep last */ 2681 QCA_ATTR_NUD_STATS_SET_LAST, 2682 QCA_ATTR_NUD_STATS_SET_MAX = 2683 QCA_ATTR_NUD_STATS_SET_LAST - 1, 2684 }; 2685 2686 /** 2687 * enum qca_attr_connectivity_check_stats_set - attribute to vendor subcmd 2688 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2689 * information to start / stop the NUD stats collection. 2690 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_STATS_PKT_INFO_TYPE: set pkt info stats 2691 * Bitmap to Flag to Start / Stop the NUD stats collection 2692 * Start - If included , Stop - If not included 2693 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DNS_DOMAIN_NAME: set gatway ipv4 address 2694 * IPv4 address of Default Gateway (in network byte order) 2695 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2696 * information to start / stop the NUD stats collection. 2697 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_SRC_PORT: set nud debug stats 2698 * Flag to Start / Stop the NUD stats collection 2699 * Start - If included , Stop - If not included 2700 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_PORT: set gatway ipv4 address 2701 * IPv4 address of Default Gateway (in network byte order) 2702 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carry the requisite 2703 * information to start / stop the NUD stats collection. 2704 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV4: set nud debug stats 2705 * Flag to Start / Stop the NUD stats collection 2706 * Start - If included , Stop - If not included 2707 * @QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV6: set gatway ipv4 address 2708 * IPv4 address of Default Gateway (in network byte order) 2709 */ 2710 enum qca_attr_connectivity_check_stats_set { 2711 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_INVALID = 0, 2712 QCA_ATTR_CONNECTIVITY_CHECK_STATS_STATS_PKT_INFO_TYPE = 1, 2713 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DNS_DOMAIN_NAME = 2, 2714 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SRC_PORT = 3, 2715 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_PORT = 4, 2716 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV4 = 5, 2717 QCA_ATTR_CONNECTIVITY_CHECK_STATS_DEST_IPV6 = 6, 2718 /* keep last */ 2719 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_LAST, 2720 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_MAX = 2721 QCA_ATTR_CONNECTIVITY_CHECK_STATS_SET_LAST - 1, 2722 }; 2723 2724 /** 2725 * qca_wlan_vendor_nud_stats_data_pkt_flags: Flag representing the various 2726 * data types for which the stats have to get collected. 2727 */ 2728 enum qca_wlan_vendor_connectivity_check_pkt_flags { 2729 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ARP = 1 << 0, 2730 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_DNS = 1 << 1, 2731 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_HANDSHAKE = 1 << 2, 2732 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ICMPV4 = 1 << 3, 2733 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_ICMPV6 = 1 << 4, 2734 /* Used by QCA_ATTR_NUD_STATS_PKT_TYPE only in nud stats get 2735 * to represent the stats of respective data type. 2736 */ 2737 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_SYN = 1 << 5, 2738 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_SYN_ACK = 1 << 6, 2739 QCA_WLAN_VENDOR_CONNECTIVITY_CHECK_SET_TCP_ACK = 1 << 7, 2740 }; 2741 2742 enum qca_attr_connectivity_check_stats { 2743 QCA_ATTR_CONNECTIVITY_CHECK_STATS_INVALID = 0, 2744 /* Data packet type for which the stats are collected. 2745 * Represented by enum qca_wlan_vendor_nud_stats_data_pkt_flags 2746 */ 2747 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_TYPE = 1, 2748 /* ID corresponding to the DNS frame for which the respective DNS stats 2749 * are monitored (u32). 2750 */ 2751 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DNS_DOMAIN_NAME = 2, 2752 /* source / destination port on which the respective proto stats are 2753 * collected (u32). 2754 */ 2755 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_SRC_PORT = 3, 2756 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_PORT = 4, 2757 /* IPv4/IPv6 address for which the destined data packets are 2758 * monitored. (in network byte order) 2759 */ 2760 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_IPV4 = 5, 2761 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_DEST_IPV6 = 6, 2762 /* Data packet Request count received from netdev */ 2763 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_FROM_NETDEV = 7, 2764 /* Data packet Request count sent to lower MAC from upper MAC */ 2765 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_TO_LOWER_MAC = 8, 2766 /* Data packet Request count received by lower MAC from upper MAC */ 2767 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_RX_COUNT_BY_LOWER_MAC = 9, 2768 /* Data packet Request count successfully transmitted by the device */ 2769 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_REQ_COUNT_TX_SUCCESS = 10, 2770 /* Data packet Response count received by lower MAC */ 2771 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_RX_COUNT_BY_LOWER_MAC = 11, 2772 /* Data packet Response count received by upper MAC */ 2773 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_RX_COUNT_BY_UPPER_MAC = 12, 2774 /* Data packet Response count delivered to netdev */ 2775 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_COUNT_TO_NETDEV = 13, 2776 /* Data Packet Response count that are dropped out of order */ 2777 QCA_ATTR_CONNECTIVITY_CHECK_STATS_PKT_RSP_COUNT_OUT_OF_ORDER_DROP = 14, 2778 2779 /* keep last */ 2780 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_LAST, 2781 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_MAX = 2782 QCA_ATTR_CONNECTIVITY_CHECK_DATA_STATS_LAST - 1, 2783 }; 2784 2785 /** 2786 * qca_attr_nud_stats_get: Attributes to vendor subcmd 2787 * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite 2788 * NUD statistics collected when queried. 2789 */ 2790 enum qca_attr_nud_stats_get { 2791 QCA_ATTR_NUD_STATS_GET_INVALID = 0, 2792 /* ARP Request count from netdev */ 2793 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1, 2794 /* ARP Request count sent to lower MAC from upper MAC */ 2795 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2, 2796 /* ARP Request count received by lower MAC from upper MAC */ 2797 QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3, 2798 /* ARP Request count successfully transmitted by the device */ 2799 QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4, 2800 /* ARP Response count received by lower MAC */ 2801 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5, 2802 /* ARP Response count received by upper MAC */ 2803 QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6, 2804 /* ARP Response count delivered to netdev */ 2805 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7, 2806 /* ARP Response count delivered to netdev */ 2807 QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8, 2808 /* 2809 * Flag indicating if the station's link to the AP is active. 2810 * Active Link - If included, Inactive link - If not included 2811 */ 2812 QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE = 9, 2813 /* 2814 * Flag indicating if there is any duplicate address detected (DAD). 2815 * Yes - If detected, No - If not detected. 2816 */ 2817 QCA_ATTR_NUD_STATS_IS_DAD = 10, 2818 /* 2819 * List of Data types for which the stats are requested. 2820 * This list does not carry ARP stats as they are done by the 2821 * above attributes. Represented by enum qca_attr_nud_data_stats. 2822 */ 2823 QCA_ATTR_NUD_STATS_DATA_PKT_STATS = 11, 2824 /* keep last */ 2825 QCA_ATTR_NUD_STATS_GET_LAST, 2826 QCA_ATTR_NUD_STATS_GET_MAX = 2827 QCA_ATTR_NUD_STATS_GET_LAST - 1, 2828 }; 2829 2830 enum qca_wlan_btm_candidate_status { 2831 QCA_STATUS_ACCEPT = 0, 2832 QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1, 2833 QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2, 2834 QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3, 2835 QCA_STATUS_REJECT_LOW_RSSI = 4, 2836 QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5, 2837 QCA_STATUS_REJECT_UNKNOWN = 6, 2838 }; 2839 2840 enum qca_wlan_vendor_attr_btm_candidate_info { 2841 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0, 2842 2843 /* 6-byte MAC address representing the BSSID of transition candidate */ 2844 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1, 2845 /* 2846 * Unsigned 32-bit value from enum qca_wlan_btm_candidate_status 2847 * returned by the driver. It says whether the BSSID provided in 2848 * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by 2849 * the driver, if not it specifies the reason for rejection. 2850 * Note that the user-space can overwrite the transition reject reason 2851 * codes provided by driver based on more information. 2852 */ 2853 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2, 2854 2855 /* keep last */ 2856 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST, 2857 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX = 2858 QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1, 2859 }; 2860 2861 enum qca_attr_trace_level { 2862 QCA_ATTR_TRACE_LEVEL_INVALID = 0, 2863 /* 2864 * Nested array of the following attributes: 2865 * QCA_ATTR_TRACE_LEVEL_MODULE, 2866 * QCA_ATTR_TRACE_LEVEL_MASK. 2867 */ 2868 QCA_ATTR_TRACE_LEVEL_PARAM = 1, 2869 /* 2870 * Specific QCA host driver module. Please refer to the QCA host 2871 * driver implementation to get the specific module ID. 2872 */ 2873 QCA_ATTR_TRACE_LEVEL_MODULE = 2, 2874 /* Different trace level masks represented in the QCA host driver. */ 2875 QCA_ATTR_TRACE_LEVEL_MASK = 3, 2876 2877 /* keep last */ 2878 QCA_ATTR_TRACE_LEVEL_AFTER_LAST, 2879 QCA_ATTR_TRACE_LEVEL_MAX = 2880 QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1, 2881 }; 2882 2883 /** 2884 * enum qca_wlan_vendor_attr_get_logger_features - value for logger 2885 * supported features 2886 * @QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID - Invalid 2887 * @QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED - Indicate the supported features 2888 * @QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - To keep track of the last enum 2889 * @QCA_WLAN_VENDOR_ATTR_LOGGER_MAX - max value possible for this type 2890 * 2891 * enum values are used for NL attributes for data used by 2892 * QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET sub command. 2893 */ 2894 enum qca_wlan_vendor_attr_get_logger_features { 2895 QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0, 2896 QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1, 2897 2898 /* keep last */ 2899 QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST, 2900 QCA_WLAN_VENDOR_ATTR_LOGGER_MAX = 2901 QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1, 2902 }; 2903 2904 /** 2905 * enum qca_wlan_vendor_attr_link_properties - link properties 2906 * 2907 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID: Invalid initial value 2908 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS: Unsigned 8-bit value to 2909 * specify the number of spatial streams negotiated 2910 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS: Unsigned 8-bit value 2911 * to specify negotiated rate flags i.e. ht, vht and channel width 2912 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ: Unsigned 32bit value to 2913 * specify the operating frequency 2914 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST: after last 2915 * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX: max value 2916 */ 2917 enum qca_wlan_vendor_attr_link_properties { 2918 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0, 2919 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_NSS = 1, 2920 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_RATE_FLAGS = 2, 2921 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_FREQ = 3, 2922 2923 /* KEEP LAST */ 2924 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST, 2925 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAX = 2926 QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1, 2927 }; 2928 2929 /** 2930 * enum qca_wlan_vendor_attr_nd_offload - vendor NS offload support 2931 * 2932 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID - Invalid 2933 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG - Flag to set NS offload 2934 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - To keep track of the last enum 2935 * @QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX - max value possible for this type 2936 * 2937 * enum values are used for NL attributes for data used by 2938 * QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD sub command. 2939 */ 2940 enum qca_wlan_vendor_attr_nd_offload { 2941 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0, 2942 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG, 2943 2944 /* Keep last */ 2945 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST, 2946 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX = 2947 QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1, 2948 }; 2949 2950 /** 2951 * enum qca_wlan_vendor_features - vendor device/driver features 2952 * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key 2953 * management offload, a mechanism where the station's firmware 2954 * does the exchange with the AP to establish the temporal keys 2955 * after roaming, rather than having the supplicant do it. 2956 * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports 2957 * simultaneous off-channel operations. 2958 * @QQCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P 2959 * Listen offload; a mechanism where the station's firmware 2960 * takes care of responding to incoming Probe Request frames received 2961 * from other P2P devices whilst in Listen state, rather than having the 2962 * user space wpa_supplicant do it. Information from received P2P 2963 * Requests are forwarded from firmware to host whenever the APPS 2964 * processor exits power collapse state. 2965 * @QCA_WLAN_VENDOR_FEATURE_OCE_STA: Device supports all OCE non-AP STA 2966 * specific features 2967 * @QCA_WLAN_VENDOR_FEATURE_OCE_AP: Device supports all OCE AP specific 2968 * features. 2969 * @QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON: Device supports OCE STA-CFON 2970 * specific features only. If a Device sets this bit but not the 2971 * QCA_WLAN_VENDOR_FEATURE_OCE_AP, the userspace shall assume that 2972 * this Device may not support all OCE AP functionalities but can support 2973 * only OCE STA-CFON functionalities. 2974 * @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self 2975 * managed regulatory. 2976 */ 2977 enum qca_wlan_vendor_features { 2978 QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, 2979 QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1, 2980 QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2, 2981 QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3, 2982 QCA_WLAN_VENDOR_FEATURE_OCE_STA = 4, 2983 QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5, 2984 QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6, 2985 QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7, 2986 /* Additional features need to be added above this */ 2987 NUM_QCA_WLAN_VENDOR_FEATURES 2988 }; 2989 2990 /** 2991 * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for SAP 2992 * conditional channel switch 2993 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID: Invalid initial 2994 * value 2995 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST: Priority based 2996 * frequency list (an array of u32 values in host byte order) 2997 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS: Status of the 2998 * conditional switch (u32)- 0: Success, Non-zero: Failure 2999 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST: After last 3000 * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX: Subcommand max 3001 */ 3002 enum qca_wlan_vendor_attr_sap_conditional_chan_switch { 3003 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0, 3004 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1, 3005 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2, 3006 3007 /* Keep Last */ 3008 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST, 3009 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX = 3010 QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1, 3011 }; 3012 3013 /** 3014 * enum wifi_logger_supported_features - values for supported logger features 3015 * @WIFI_LOGGER_MEMORY_DUMP_SUPPORTED: Memory dump of FW 3016 * @WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED: Per packet statistics 3017 * @WIFI_LOGGER_CONNECT_EVENT_SUPPORTED: Logging of Connectivity events 3018 * @WIFI_LOGGER_POWER_EVENT_SUPPORTED: Power of driver 3019 * @WIFI_LOGGER_WAKE_LOCK_SUPPORTE: Wakelock of driver 3020 * @WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED: monitor FW health 3021 * @WIFI_LOGGER_DRIVER_DUMP_SUPPORTED: support driver dump 3022 * @WIFI_LOGGER_PACKET_FATE_SUPPORTED: tracks connection packets fate 3023 */ 3024 enum wifi_logger_supported_features { 3025 WIFI_LOGGER_MEMORY_DUMP_SUPPORTED = (1 << (0)), 3026 WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED = (1 << (1)), 3027 WIFI_LOGGER_CONNECT_EVENT_SUPPORTED = (1 << (2)), 3028 WIFI_LOGGER_POWER_EVENT_SUPPORTED = (1 << (3)), 3029 WIFI_LOGGER_WAKE_LOCK_SUPPORTED = (1 << (4)), 3030 WIFI_LOGGER_VERBOSE_SUPPORTED = (1 << (5)), 3031 WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED = (1 << (6)), 3032 WIFI_LOGGER_DRIVER_DUMP_SUPPORTED = (1 << (7)), 3033 WIFI_LOGGER_PACKET_FATE_SUPPORTED = (1 << (8)) 3034 }; 3035 /** 3036 * enum qca_wlan_vendor_attr_acs_offload 3037 * 3038 * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: ACS selected primary channel 3039 * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: ACS selected secondary channel 3040 * @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: hw_mode for ACS 3041 * @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: indicate if HT capability is enabled 3042 * @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: indicate HT capability 3043 */ 3044 enum qca_wlan_vendor_attr_acs_offload { 3045 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, 3046 QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL, 3047 QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL, 3048 QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE, 3049 QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED, 3050 QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED, 3051 QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED, 3052 QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH, 3053 QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST, 3054 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL, 3055 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL, 3056 QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST, 3057 /* keep last */ 3058 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, 3059 QCA_WLAN_VENDOR_ATTR_ACS_MAX = 3060 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 3061 }; 3062 3063 /** 3064 * enum qca_wlan_vendor_acs_hw_mode 3065 * 3066 * @QCA_ACS_MODE_IEEE80211B: 11b mode 3067 * @QCA_ACS_MODE_IEEE80211G: 11g mode 3068 * @QCA_ACS_MODE_IEEE80211A: 11a mode 3069 * @QCA_ACS_MODE_IEEE80211AD: 11ad mode 3070 */ 3071 enum qca_wlan_vendor_acs_hw_mode { 3072 QCA_ACS_MODE_IEEE80211B, 3073 QCA_ACS_MODE_IEEE80211G, 3074 QCA_ACS_MODE_IEEE80211A, 3075 QCA_ACS_MODE_IEEE80211AD, 3076 QCA_ACS_MODE_IEEE80211ANY, 3077 }; 3078 3079 /** 3080 * enum qca_access_policy - access control policy 3081 * 3082 * Access control policy is applied on the configured IE 3083 * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE). 3084 * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY. 3085 * 3086 * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi Connections which match 3087 *» with the specific configuration (IE) set, i.e. allow all the 3088 *» connections which do not match the configuration. 3089 * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi Connections which match 3090 *» with the specific configuration (IE) set, i.e. deny all the 3091 *» connections which do not match the configuration. 3092 */ 3093 enum qca_access_policy { 3094 QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED, 3095 QCA_ACCESS_POLICY_DENY_UNLESS_LISTED, 3096 }; 3097 3098 /** 3099 * enum qca_ignore_assoc_disallowed - Ignore assoc disallowed values 3100 * 3101 * The valid values for the ignore assoc disallowed 3102 * 3103 * @QCA_IGNORE_ASSOC_DISALLOWED_DISABLE: Disable ignore assoc disallowed 3104 * @QCA_IGNORE_ASSOC_DISALLOWED_ENABLE: Enable ignore assoc disallowed 3105 * 3106 */ 3107 enum qca_ignore_assoc_disallowed { 3108 QCA_IGNORE_ASSOC_DISALLOWED_DISABLE, 3109 QCA_IGNORE_ASSOC_DISALLOWED_ENABLE 3110 }; 3111 3112 /* Attributes for data used by 3113 * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and 3114 * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands. 3115 */ 3116 enum qca_wlan_vendor_attr_config { 3117 QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0, 3118 /* 3119 * Unsigned 32-bit value to set the DTIM period. 3120 * Whether the wifi chipset wakes at every dtim beacon or a multiple of 3121 * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3 3122 * DTIM beacons. 3123 */ 3124 QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM = 1, 3125 /* 3126 * Unsigned 32-bit value to set the wifi_iface stats averaging factor 3127 * used to calculate statistics like average the TSF offset or average 3128 * number of frame leaked. 3129 * For instance, upon Beacon frame reception: 3130 * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000 3131 * For instance, when evaluating leaky APs: 3132 * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000 3133 */ 3134 QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2, 3135 /* 3136 * Unsigned 32-bit value to configure guard time, i.e., when 3137 * implementing IEEE power management based on frame control PM bit, how 3138 * long the driver waits before shutting down the radio and after 3139 * receiving an ACK frame for a Data frame with PM bit set. 3140 */ 3141 QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3, 3142 /* Unsigned 32-bit value to change the FTM capability dynamically */ 3143 QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4, 3144 /* Unsigned 16-bit value to configure maximum TX rate dynamically */ 3145 QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5, 3146 /* 3147 * Unsigned 32-bit value to configure the number of continuous 3148 * Beacon Miss which shall be used by the firmware to penalize 3149 * the RSSI. 3150 */ 3151 QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6, 3152 /* 3153 * Unsigned 8-bit value to configure the channel avoidance indication 3154 * behavior. Firmware to send only one indication and ignore duplicate 3155 * indications when set to avoid multiple Apps wakeups. 3156 */ 3157 QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7, 3158 /* 3159 * 8-bit unsigned value to configure the maximum TX MPDU for 3160 * aggregation. 3161 */ 3162 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8, 3163 /* 3164 * 8-bit unsigned value to configure the maximum RX MPDU for 3165 * aggregation. 3166 */ 3167 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9, 3168 /* 3169 * 8-bit unsigned value to configure the Non aggregrate/11g sw 3170 * retry threshold (0 disable, 31 max). 3171 */ 3172 QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10, 3173 /* 3174 * 8-bit unsigned value to configure the aggregrate sw 3175 * retry threshold (0 disable, 31 max). 3176 */ 3177 QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11, 3178 /* 3179 * 8-bit unsigned value to configure the MGMT frame 3180 * retry threshold (0 disable, 31 max). 3181 */ 3182 QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12, 3183 /* 3184 * 8-bit unsigned value to configure the CTRL frame 3185 * retry threshold (0 disable, 31 max). 3186 */ 3187 QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13, 3188 /* 3189 * 8-bit unsigned value to configure the propagation delay for 3190 * 2G/5G band (0~63, units in us) 3191 */ 3192 QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14, 3193 /* 3194 * Unsigned 32-bit value to configure the number of unicast TX fail 3195 * packet count. The peer is disconnected once this threshold is 3196 * reached. 3197 */ 3198 QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15, 3199 /* 3200 * Attribute used to set scan default IEs to the driver. 3201 * 3202 * These IEs can be used by scan operations that will be initiated by 3203 * the driver/firmware. 3204 * 3205 * For further scan requests coming to the driver, these IEs should be 3206 * merged with the IEs received along with scan request coming to the 3207 * driver. If a particular IE is present in the scan default IEs but not 3208 * present in the scan request, then that IE should be added to the IEs 3209 * sent in the Probe Request frames for that scan request. 3210 */ 3211 QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16, 3212 /* Unsigned 32-bit attribute for generic commands */ 3213 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17, 3214 /* Unsigned 32-bit value attribute for generic commands */ 3215 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18, 3216 /* Unsigned 32-bit data attribute for generic command response */ 3217 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19, 3218 /* 3219 * Unsigned 32-bit length attribute for 3220 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA 3221 */ 3222 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20, 3223 /* 3224 * Unsigned 32-bit flags attribute for 3225 * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA 3226 */ 3227 QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21, 3228 /* 3229 * Unsigned 32-bit, defining the access policy. 3230 * See enum qca_access_policy. Used with 3231 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. 3232 */ 3233 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22, 3234 /* 3235 * Sets the list of full set of IEs for which a specific access policy 3236 * has to be applied. Used along with 3237 * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access. 3238 * Zero length payload can be used to clear this access constraint. 3239 */ 3240 QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23, 3241 /* 3242 * Unsigned 32-bit, specifies the interface index (netdev) for which the 3243 * corresponding configurations are applied. If the interface index is 3244 * not specified, the configurations are attributed to the respective 3245 * wiphy. 3246 */ 3247 QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24, 3248 /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */ 3249 QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25, 3250 /* 3251 * 8-bit unsigned value to configure the driver and below layers to 3252 * ignore the assoc disallowed set by APs while connecting 3253 * 1-Ignore, 0-Don't ignore 3254 */ 3255 QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26, 3256 /* 3257 * 32-bit unsigned value to trigger antenna diversity features: 3258 * 1-Enable, 0-Disable 3259 */ 3260 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27, 3261 /* 32-bit unsigned value to configure specific chain antenna */ 3262 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28, 3263 /* 3264 * 32-bit unsigned value to trigger cycle selftest 3265 * 1-Enable, 0-Disable 3266 */ 3267 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29, 3268 /* 3269 * 32-bit unsigned to configure the cycle time of selftest 3270 * the unit is micro-second 3271 */ 3272 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30, 3273 /* 32-bit unsigned value to set reorder timeout for AC_VO */ 3274 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31, 3275 /* 32-bit unsigned value to set reorder timeout for AC_VI */ 3276 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32, 3277 /* 32-bit unsigned value to set reorder timeout for AC_BE */ 3278 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33, 3279 /* 32-bit unsigned value to set reorder timeout for AC_BK */ 3280 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34, 3281 /* 6-byte MAC address to point out the specific peer */ 3282 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35, 3283 /* 32-bit unsigned value to set window size for specific peer */ 3284 QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36, 3285 /* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */ 3286 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37, 3287 /* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */ 3288 QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38, 3289 /* 3290 * 32-bit unsigned value to configure 5 or 10 MHz channel width for 3291 * station device while in disconnect state. The attribute use the 3292 * value of enum nl80211_chan_width: NL80211_CHAN_WIDTH_5 means 5 MHz, 3293 * NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or 3294 * 10 MHz channel width, the station will not connect to a BSS using 20 3295 * MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to 3296 * clear this constraint. 3297 */ 3298 QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39, 3299 /* 3300 * 32-bit unsigned value to configure the propagation absolute delay 3301 * for 2G/5G band (units in us) 3302 */ 3303 QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40, 3304 /* 32-bit unsigned value to set probe period */ 3305 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41, 3306 /* 32-bit unsigned value to set stay period */ 3307 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD = 42, 3308 /* 32-bit unsigned value to set snr diff */ 3309 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SNR_DIFF = 43, 3310 /* 32-bit unsigned value to set probe dwell time */ 3311 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_DWELL_TIME = 44, 3312 /* 32-bit unsigned value to set mgmt snr weight */ 3313 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT = 45, 3314 /* 32-bit unsigned value to set data snr weight */ 3315 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT = 46, 3316 /* 32-bit unsigned value to set ack snr weight */ 3317 QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT = 47, 3318 /* 3319 * 32-bit unsigned value to configure the listen interval. 3320 * This is in units of beacon intervals. This configuration alters 3321 * the negotiated listen interval with the AP during the connection. 3322 * It is highly recommended to configure a value less than or equal to 3323 * the one negotiated during the association. Configuring any greater 3324 * value can have adverse effects (frame loss, AP disassociating STA, 3325 * etc.). 3326 */ 3327 QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL = 48, 3328 /* 3329 * 8 bit unsigned value that is set on an AP/GO virtual interface to 3330 * disable operations that would cause the AP/GO to leave its operating 3331 * channel. 3332 * 3333 * This will restrict the scans to the AP/GO operating channel and the 3334 * channels of the other band, if DBS is supported.A STA/CLI interface 3335 * brought up after this setting is enabled, will be restricted to 3336 * connecting to devices only on the AP/GO interface's operating channel 3337 * or on the other band in DBS case. P2P supported channel list is 3338 * modified, to only include AP interface's operating-channel and the 3339 * channels of the other band if DBS is supported. 3340 * 3341 * These restrictions are only applicable as long as the AP/GO interface 3342 * is alive. If the AP/GO interface is brought down then this 3343 * setting/restriction is forgotten. 3344 * 3345 * If this variable is set on an AP/GO interface while a multi-channel 3346 * concurrent session is active, it has no effect on the operation of 3347 * the current interfaces, other than restricting the scan to the AP/GO 3348 * operating channel and the other band channels if DBS is supported. 3349 * However, if the STA is brought down and restarted then the new STA 3350 * connection will either be formed on the AP/GO channel or on the 3351 * other band in a DBS case. This is because of the scan being 3352 * restricted on these channels as mentioned above. 3353 * 3354 * 1-Disable offchannel operations, 0-Enable offchannel operations. 3355 */ 3356 QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL = 49, 3357 3358 /* 3359 * 8 bit unsigned value to enable/disable LRO (Large Receive Offload) 3360 * on an interface. 3361 * 1 - Enable , 0 - Disable. 3362 */ 3363 QCA_WLAN_VENDOR_ATTR_CONFIG_LRO = 50, 3364 3365 /* 3366 * 8 bit unsigned value to globally enable/disable scan 3367 * 1 - Enable, 0 - Disable. 3368 */ 3369 QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51, 3370 3371 /* 8-bit unsigned value to set the total beacon miss count */ 3372 QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52, 3373 3374 /* 3375 * Unsigned 32-bit value to configure the number of continuous 3376 * Beacon Miss which shall be used by the firmware to penalize 3377 * the RSSI for BTC. 3378 */ 3379 QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS_BTC = 53, 3380 3381 /* 3382 * 8-bit unsigned value to configure the driver and below layers to 3383 * enable/disable all fils features. 3384 * 0-enable, 1-disable 3385 */ 3386 QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54, 3387 3388 /* 16-bit unsigned value to configure the level of WLAN latency 3389 * module. See enum qca_wlan_vendor_attr_config_latency_level. 3390 */ 3391 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL = 55, 3392 3393 /* 3394 * 8-bit unsigned value indicating the driver to use the RSNE as-is from 3395 * the connect interface. Exclusively used for the scenarios where the 3396 * device is used as a test bed device with special functionality and 3397 * not recommended for production. This helps driver to not validate the 3398 * RSNE passed from user space and thus allow arbitrary IE data to be 3399 * used for testing purposes. 3400 * 1-enable, 0-disable. 3401 * Applications set/reset this configuration. If not reset, this 3402 * parameter remains in use until the driver is unloaded. 3403 */ 3404 QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE = 56, 3405 3406 /* 3407 * 8-bit unsigned value to trigger green Tx power saving. 3408 * 1-Enable, 0-Disable 3409 */ 3410 QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57, 3411 3412 /* keep last */ 3413 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST, 3414 QCA_WLAN_VENDOR_ATTR_CONFIG_MAX = 3415 QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1, 3416 }; 3417 3418 /** 3419 * enum qca_wlan_vendor_attr_wifi_logger_start - Enum for wifi logger starting 3420 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID: Invalid attribute 3421 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID: Ring ID 3422 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL: Verbose level 3423 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS: Flag 3424 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST: Last value 3425 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX: Max value 3426 */ 3427 enum qca_wlan_vendor_attr_wifi_logger_start { 3428 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0, 3429 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1, 3430 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2, 3431 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3, 3432 /* keep last */ 3433 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST, 3434 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_MAX = 3435 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1, 3436 }; 3437 3438 /* 3439 * enum qca_wlan_vendor_attr_wifi_logger_get_ring_data - Get ring data 3440 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID: Invalid attribute 3441 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID: Ring ID 3442 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST: Last value 3443 * @QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX: Max value 3444 */ 3445 enum qca_wlan_vendor_attr_wifi_logger_get_ring_data { 3446 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_INVALID = 0, 3447 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_ID = 1, 3448 /* keep last */ 3449 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST, 3450 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_MAX = 3451 QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_GET_RING_DATA_AFTER_LAST - 1, 3452 }; 3453 3454 #ifdef WLAN_FEATURE_OFFLOAD_PACKETS 3455 /** 3456 * enum wlan_offloaded_packets_control - control commands 3457 * @WLAN_START_OFFLOADED_PACKETS: start offloaded packets 3458 * @WLAN_STOP_OFFLOADED_PACKETS: stop offloaded packets 3459 * 3460 */ 3461 enum wlan_offloaded_packets_control { 3462 WLAN_START_OFFLOADED_PACKETS = 1, 3463 WLAN_STOP_OFFLOADED_PACKETS = 2 3464 }; 3465 3466 /** 3467 * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication 3468 * 3469 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to 3470 * the offloaded data. 3471 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded 3472 * data. 3473 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload 3474 * indication. 3475 */ 3476 enum qca_wlan_vendor_attr_data_offload_ind { 3477 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0, 3478 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION, 3479 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL, 3480 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT, 3481 3482 /* keep last */ 3483 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST, 3484 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX = 3485 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1 3486 }; 3487 3488 /** 3489 * enum qca_wlan_vendor_attr_offloaded_packets - offloaded packets 3490 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID: invalid 3491 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL: control 3492 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID: request id 3493 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA: ip packet data 3494 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR: src mac address 3495 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR: destination mac address 3496 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD: period in milli seconds 3497 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST: after last 3498 * @QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX: max 3499 */ 3500 enum qca_wlan_vendor_attr_offloaded_packets { 3501 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0, 3502 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL, 3503 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID, 3504 3505 /* Packet in hex format */ 3506 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA, 3507 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR, 3508 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR, 3509 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD, 3510 3511 /* keep last */ 3512 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST, 3513 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX = 3514 QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1, 3515 }; 3516 #endif 3517 3518 /** 3519 * enum qca_wlan_rssi_monitoring_control - rssi control commands 3520 * @QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID: invalid 3521 * @QCA_WLAN_RSSI_MONITORING_START: rssi monitoring start 3522 * @QCA_WLAN_RSSI_MONITORING_STOP: rssi monitoring stop 3523 */ 3524 enum qca_wlan_rssi_monitoring_control { 3525 QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0, 3526 QCA_WLAN_RSSI_MONITORING_START, 3527 QCA_WLAN_RSSI_MONITORING_STOP, 3528 }; 3529 3530 /** 3531 * enum qca_wlan_vendor_attr_rssi_monitoring - rssi monitoring 3532 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID: Invalid 3533 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL: control 3534 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI: max rssi 3535 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI: min rssi 3536 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID: current bssid 3537 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI: current rssi 3538 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST: after last 3539 * @QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX: max 3540 */ 3541 enum qca_wlan_vendor_attr_rssi_monitoring { 3542 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0, 3543 3544 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL, 3545 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID, 3546 3547 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI, 3548 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI, 3549 3550 /* attributes to be used/received in callback */ 3551 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID, 3552 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI, 3553 3554 /* keep last */ 3555 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST, 3556 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX = 3557 QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1, 3558 }; 3559 3560 /** 3561 * enum qca_wlan_vendor_attr_ndp_params - Used by the vendor command 3562 * QCA_NL80211_VENDOR_SUBCMD_NDP. 3563 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID 3564 * @QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD: sub commands values in qca_wlan_ndp_sub_cmd 3565 * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID: 3566 * @QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID: indicats a service info 3567 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL: channel frequency in MHz 3568 * @QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR: Interface Discovery MAC 3569 * address 3570 * @QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR: Interface name on which NDP is being 3571 * created 3572 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY: CONFIG_SECURITY is deprecated, use 3573 * NCS_SK_TYPE/PMK/SCID instead 3574 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS: value for QoS 3575 * @QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO: app info 3576 * @QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID: NDP instance Id 3577 * @QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY: Array of instance Ids 3578 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE: initiator/responder NDP response 3579 * code: accept/reject 3580 * @QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR: NDI MAC address 3581 * @QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE: errors types returned by 3582 * driver 3583 * @QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE: value error values returned by 3584 * driver 3585 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG: Channel setup configuration 3586 * @QCA_WLAN_VENDOR_ATTR_NDP_CSID: Cipher Suite Shared Key Type 3587 * @QCA_WLAN_VENDOR_ATTR_NDP_PMK: PMK_INFO 3588 * @QCA_WLAN_VENDOR_ATTR_NDP_SCID: Security Context Identifier that contains the 3589 * PMKID 3590 * @QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE: passphrase 3591 * @QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME: service name 3592 * @QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON: bitmap indicating schedule 3593 * update: 3594 * BIT_0: NSS Update 3595 * BIT_1: Channel list update 3596 * @QCA_WLAN_VENDOR_ATTR_NDP_NSS: nss 3597 * @QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS: NUMBER NDP CHANNEL 3598 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH: CHANNEL BANDWIDTH: 3599 * 0:20 MHz, 3600 * 1:40 MHz, 3601 * 2:80 MHz, 3602 * 3:160 MHz 3603 * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO: Array of channel/band width 3604 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST: id after last valid attribute 3605 * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX: max value of this enum type 3606 * @QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR: IPv6 address used by NDP, 16 bytes array 3607 * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT: Unsigned 16-bit value indicating 3608 * transport port used by NDP. 3609 * QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL: Unsigned 8-bit value indicating 3610 * protocol used by NDP and assigned by the Internet Assigned Numbers Authority 3611 * as per: www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml 3612 */ 3613 enum qca_wlan_vendor_attr_ndp_params { 3614 QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0, 3615 QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD = 1, 3616 QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID = 2, 3617 QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID = 3, 3618 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL = 4, 3619 QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR = 5, 3620 QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR = 6, 3621 QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY = 7, 3622 QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS = 8, 3623 QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO = 9, 3624 QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID = 10, 3625 QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY = 11, 3626 QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE = 12, 3627 QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR = 13, 3628 QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE = 14, 3629 QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE = 15, 3630 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG = 16, 3631 QCA_WLAN_VENDOR_ATTR_NDP_CSID = 17, 3632 QCA_WLAN_VENDOR_ATTR_NDP_PMK = 18, 3633 QCA_WLAN_VENDOR_ATTR_NDP_SCID = 19, 3634 QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE = 20, 3635 QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME = 21, 3636 QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON = 22, 3637 QCA_WLAN_VENDOR_ATTR_NDP_NSS = 23, 3638 QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS = 24, 3639 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH = 25, 3640 QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO = 26, 3641 QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR = 27, 3642 QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT = 28, 3643 QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29, 3644 3645 /* keep last */ 3646 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST, 3647 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX = 3648 QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST - 1, 3649 }; 3650 3651 /** 3652 * enum qca_wlan_ndp_sub_cmd - NDP sub comands types for 3653 * QCA_NL80211_VENDOR_SUBCMD_NDP. 3654 * @QCA_WLAN_VENDOR_ATTR_NDP_INVALID: invalid value 3655 * @QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE: create a ndi 3656 * @QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE: delete a ndi 3657 * @QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST: initiate a ndp session 3658 * @QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE: response for above 3659 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST: respond to ndp session 3660 * @QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE: response for above 3661 * @QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST: initiate a ndp end 3662 * @QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE: response for above 3663 * @QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND: notify the peer about the end request 3664 * @QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND: confirm the ndp session is complete 3665 * @QCA_WLAN_VENDOR_ATTR_NDP_END_IND: indicate the peer about the end request 3666 * being received 3667 * @QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND: indicate the peer of schedule 3668 * update 3669 */ 3670 enum qca_wlan_ndp_sub_cmd { 3671 QCA_WLAN_VENDOR_ATTR_NDP_INVALID = 0, 3672 QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE = 1, 3673 QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE = 2, 3674 QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST = 3, 3675 QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE = 4, 3676 QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST = 5, 3677 QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE = 6, 3678 QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST = 7, 3679 QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE = 8, 3680 QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND = 9, 3681 QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND = 10, 3682 QCA_WLAN_VENDOR_ATTR_NDP_END_IND = 11, 3683 QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND = 12 3684 }; 3685 3686 /** 3687 * qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel 3688 * information. These attributes are sent as part of 3689 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following 3690 * attributes correspond to a single channel. 3691 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS: A bitmask (u16) 3692 * with flags specified in qca_wlan_vendor_channel_prop_flags_ext. 3693 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT: A bitmask (u16) 3694 * with flags specified in qca_wlan_vendor_channel_prop_flags_ext. 3695 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ: frequency 3696 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER: maximum 3697 * regulatory transmission power 3698 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER: maximum 3699 * transmission power 3700 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER: minimum 3701 * transmission power 3702 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID: regulatory 3703 * class id 3704 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN: maximum 3705 * antenna gain in dbm 3706 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0: vht segment 0 3707 * @QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1: vht segment 1 3708 * 3709 */ 3710 enum qca_wlan_vendor_external_acs_event_chan_info_attr { 3711 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0, 3712 3713 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1, 3714 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2, 3715 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3, 3716 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4, 3717 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5, 3718 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6, 3719 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7, 3720 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8, 3721 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9, 3722 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10, 3723 /* 3724 * A bitmask (u32) with flags specified in 3725 * enum qca_wlan_vendor_channel_prop_flags_2. 3726 */ 3727 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11, 3728 3729 /* keep last */ 3730 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST, 3731 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX = 3732 QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1, 3733 }; 3734 3735 /** 3736 * enum qca_wlan_vendor_attr_start_acs_config: attribute to vendor sub-command 3737 * QCA_NL80211_VENDOR_SUBCMD_START_ACS. This will be triggered by host 3738 * driver. 3739 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON: This reason refers to 3740 * qca_wlan_vendor_acs_select_reason. This helps acs module to understand why 3741 * ACS need to be started 3742 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED: Does 3743 * driver supports spectral scanning or not 3744 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED: Is 11ac is 3745 * offloaded to firmware. 3746 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT: Does driver 3747 * provides additional channel capability as part of scan operation. 3748 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP:Flag attribute to indicate 3749 * interface status is UP 3750 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE: Operating mode of 3751 * interface. It takes one of nl80211_iftype values. 3752 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH: This is the upper bound 3753 * of chan width. ACS logic should try to get a channel with specified width 3754 * if not found then look for lower values. 3755 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND: nl80211_bands 3756 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE: PHY/HW mode such as 3757 * a/b/g/n/ac. 3758 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST: Supported frequency list 3759 * among which ACS should choose best frequency. 3760 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL:Preferred Chan List by the 3761 * driver which will have <channel(u8), weight(u8)> format as array of 3762 * nested values. 3763 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO: Array of nested attribute 3764 * for each channel. It takes attr as defined in 3765 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY:External ACS policy such as 3766 * PCL mandatory, PCL preferred, etc.It uses values defined in enum 3767 * qca_wlan_vendor_attr_external_acs_policy. 3768 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO: Reference RF 3769 * Operating Parameter (RROP) availability information (u16). It uses values 3770 * defined in enum qca_wlan_vendor_attr_rropavail_info. 3771 */ 3772 enum qca_wlan_vendor_attr_external_acs_event { 3773 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0, 3774 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1, 3775 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2, 3776 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3, 3777 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4, 3778 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5, 3779 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6, 3780 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7, 3781 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8, 3782 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9, 3783 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10, 3784 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11, 3785 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12, 3786 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13, 3787 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14, 3788 3789 /* keep last */ 3790 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST, 3791 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX = 3792 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1, 3793 }; 3794 3795 enum qca_iface_type { 3796 QCA_IFACE_TYPE_STA, 3797 QCA_IFACE_TYPE_AP, 3798 QCA_IFACE_TYPE_P2P_CLIENT, 3799 QCA_IFACE_TYPE_P2P_GO, 3800 QCA_IFACE_TYPE_IBSS, 3801 QCA_IFACE_TYPE_TDLS, 3802 }; 3803 3804 /** 3805 * enum qca_wlan_vendor_attr_pcl_config: attribute to vendor sub-command 3806 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL. 3807 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_INVALID: invalid value 3808 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_CHANNEL: pcl channel number 3809 * @QCA_WLAN_VENDOR_ATTR_PCL_CONFIG_WEIGHT: pcl channel weight 3810 */ 3811 enum qca_wlan_vendor_attr_pcl_config { 3812 QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0, 3813 QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1, 3814 QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2, 3815 }; 3816 3817 enum qca_set_band { 3818 QCA_SETBAND_AUTO, 3819 QCA_SETBAND_5G, 3820 QCA_SETBAND_2G, 3821 }; 3822 3823 /** 3824 * enum set_reset_packet_filter - set packet filter control commands 3825 * @QCA_WLAN_SET_PACKET_FILTER: Set Packet Filter 3826 * @QCA_WLAN_GET_PACKET_FILTER: Get Packet filter 3827 * @QCA_WLAN_WRITE_PACKET_FILTER: Write packet filter program/data 3828 * @QCA_WLAN_READ_PACKET_FILTER: Read packet filter program/data 3829 * @QCA_WLAN_ENABLE_PACKET_FILTER: Enable APF interpreter 3830 * @QCA_WLAN_DISABLE_PACKET_FILTER: Disable APF interpreter 3831 */ 3832 enum set_reset_packet_filter { 3833 QCA_WLAN_SET_PACKET_FILTER = 1, 3834 QCA_WLAN_GET_PACKET_FILTER = 2, 3835 QCA_WLAN_WRITE_PACKET_FILTER = 3, 3836 QCA_WLAN_READ_PACKET_FILTER = 4, 3837 QCA_WLAN_ENABLE_PACKET_FILTER = 5, 3838 QCA_WLAN_DISABLE_PACKET_FILTER = 6, 3839 }; 3840 3841 /** 3842 * enum qca_wlan_vendor_attr_packet_filter - APF control commands 3843 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID: Invalid 3844 * @QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER: Filter ID 3845 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION: Filter Version 3846 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE: Total Length 3847 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET: Current offset 3848 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM: length of APF instructions 3849 * @QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH: length of the program 3850 * section in packet filter buffer 3851 */ 3852 enum qca_wlan_vendor_attr_packet_filter { 3853 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0, 3854 QCA_WLAN_VENDOR_ATTR_SET_RESET_PACKET_FILTER, 3855 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION, 3856 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID, 3857 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE, 3858 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET, 3859 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM, 3860 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH, 3861 3862 /* keep last */ 3863 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST, 3864 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX = 3865 QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1, 3866 }; 3867 3868 /** 3869 * enum qca_wlan_vendor_attr_wake_stats - wake lock stats 3870 * @QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID: invalid 3871 * @QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE: 3872 * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR: 3873 * @QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ: 3874 * @QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE: 3875 * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR: 3876 * @QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ: 3877 * @QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE: 3878 * total rx wakeup count 3879 * @QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT: 3880 * Total rx unicast packet which woke up host 3881 * @QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT: 3882 * Total rx multicast packet which woke up host 3883 * @QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT: 3884 * Total rx broadcast packet which woke up host 3885 * @QCA_WLAN_VENDOR_ATTR_ICMP_PKT: 3886 * wake icmp packet count 3887 * @QCA_WLAN_VENDOR_ATTR_ICMP6_PKT: 3888 * wake icmp6 packet count 3889 * @QCA_WLAN_VENDOR_ATTR_ICMP6_RA: 3890 * wake icmp6 RA packet count 3891 * @QCA_WLAN_VENDOR_ATTR_ICMP6_NA: 3892 * wake icmp6 NA packet count 3893 * @QCA_WLAN_VENDOR_ATTR_ICMP6_NS: 3894 * wake icmp6 NS packet count 3895 * @QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT: 3896 * Rx wake packet count due to ipv4 multicast 3897 * @QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT: 3898 * Rx wake packet count due to ipv6 multicast 3899 * @QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT: 3900 * Rx wake packet count due to non-ipv4 and non-ipv6 packets 3901 * @QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT: 3902 * wake rssi breach packet count 3903 * @QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT: 3904 * wake low rssi packet count 3905 * @QCA_WLAN_VENDOR_ATTR_GSCAN_CNT: 3906 * wake gscan packet count 3907 * @QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT: 3908 * wake pno complete packet count 3909 * @QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT: 3910 * wake pno match packet count 3911 */ 3912 enum qca_wlan_vendor_attr_wake_stats { 3913 QCA_WLAN_VENDOR_ATTR_GET_WAKE_STATS_INVALID = 0, 3914 QCA_WLAN_VENDOR_ATTR_TOTAL_CMD_EVENT_WAKE, 3915 QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_PTR, 3916 QCA_WLAN_VENDOR_ATTR_CMD_EVENT_WAKE_CNT_SZ, 3917 QCA_WLAN_VENDOR_ATTR_TOTAL_DRIVER_FW_LOCAL_WAKE, 3918 QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_PTR, 3919 QCA_WLAN_VENDOR_ATTR_DRIVER_FW_LOCAL_WAKE_CNT_SZ, 3920 QCA_WLAN_VENDOR_ATTR_TOTAL_RX_DATA_WAKE, 3921 QCA_WLAN_VENDOR_ATTR_RX_UNICAST_CNT, 3922 QCA_WLAN_VENDOR_ATTR_RX_MULTICAST_CNT, 3923 QCA_WLAN_VENDOR_ATTR_RX_BROADCAST_CNT, 3924 QCA_WLAN_VENDOR_ATTR_ICMP_PKT, 3925 QCA_WLAN_VENDOR_ATTR_ICMP6_PKT, 3926 QCA_WLAN_VENDOR_ATTR_ICMP6_RA, 3927 QCA_WLAN_VENDOR_ATTR_ICMP6_NA, 3928 QCA_WLAN_VENDOR_ATTR_ICMP6_NS, 3929 QCA_WLAN_VENDOR_ATTR_ICMP4_RX_MULTICAST_CNT, 3930 QCA_WLAN_VENDOR_ATTR_ICMP6_RX_MULTICAST_CNT, 3931 QCA_WLAN_VENDOR_ATTR_OTHER_RX_MULTICAST_CNT, 3932 QCA_WLAN_VENDOR_ATTR_RSSI_BREACH_CNT, 3933 QCA_WLAN_VENDOR_ATTR_LOW_RSSI_CNT, 3934 QCA_WLAN_VENDOR_ATTR_GSCAN_CNT, 3935 QCA_WLAN_VENDOR_ATTR_PNO_COMPLETE_CNT, 3936 QCA_WLAN_VENDOR_ATTR_PNO_MATCH_CNT, 3937 /* keep last */ 3938 QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST, 3939 QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX = 3940 QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1, 3941 }; 3942 3943 /** 3944 * enum qca_vendor_element_id - QCA Vendor Specific element types 3945 * 3946 * These values are used to identify QCA Vendor Specific elements. The 3947 * payload of the element starts with the three octet OUI (OUI_QCA) and 3948 * is followed by a single octet type which is defined by this enum. 3949 * 3950 * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list. 3951 * This element can be used to specify preference order for supported 3952 * channels. The channels in this list are in preference order (the first 3953 * one has the highest preference) and are described as a pair of 3954 * (global) Operating Class and Channel Number (each one octet) fields. 3955 * 3956 * This extends the standard P2P functionality by providing option to have 3957 * more than one preferred operating channel. When this element is present, 3958 * it replaces the preference indicated in the Operating Channel attribute. 3959 * For supporting other implementations, the Operating Channel attribute is 3960 * expected to be used with the highest preference channel. Similarly, all 3961 * the channels included in this Preferred channel list element are 3962 * expected to be included in the Channel List attribute. 3963 * 3964 * This vendor element may be included in GO Negotiation Request, P2P 3965 * Invitation Request, and Provision Discovery Request frames. 3966 * 3967 * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element. 3968 * This element can be used for pre-standard publication testing of HE 3969 * before P802.11ax draft assigns the element ID. The payload of this 3970 * vendor specific element is defined by the latest P802.11ax draft. 3971 * Please note that the draft is still work in progress and this element 3972 * payload is subject to change. 3973 * 3974 * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element. 3975 * This element can be used for pre-standard publication testing of HE 3976 * before P802.11ax draft assigns the element ID. The payload of this 3977 * vendor specific element is defined by the latest P802.11ax draft. 3978 * Please note that the draft is still work in progress and this element 3979 * payload is subject to change. 3980 * 3981 * @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set 3982 * element). 3983 * This element can be used for pre-standard publication testing of HE 3984 * before P802.11ax draft assigns the element ID extension. The payload of 3985 * this vendor specific element is defined by the latest P802.11ax draft 3986 * (not including the Element ID Extension field). Please note that the 3987 * draft is still work in progress and this element payload is subject to 3988 * change. 3989 * 3990 * @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element. 3991 * This element can be used for pre-standard publication testing of HE 3992 * before P802.11ax draft assigns the element ID extension. The payload of 3993 * this vendor specific element is defined by the latest P802.11ax draft 3994 * (not including the Element ID Extension field). Please note that the 3995 * draft is still work in progress and this element payload is subject to 3996 * change. 3997 * 3998 * @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element. 3999 * This element can be used for pre-standard publication testing of HE 4000 * before P802.11ax draft assigns the element ID extension. The payload of 4001 * this vendor specific element is defined by the latest P802.11ax draft 4002 * (not including the Element ID Extension field). Please note that the 4003 * draft is still work in progress and this element payload is subject to 4004 * change. 4005 */ 4006 enum qca_vendor_element_id { 4007 QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0, 4008 QCA_VENDOR_ELEM_HE_CAPAB = 1, 4009 QCA_VENDOR_ELEM_HE_OPER = 2, 4010 QCA_VENDOR_ELEM_RAPS = 3, 4011 QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4, 4012 QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5, 4013 }; 4014 4015 /** 4016 * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture 4017 * @QCA_WLAN_VENDOR_ATTR_TSF_INVALID: Invalid attribute value 4018 * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32) 4019 * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value 4020 * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized 4021 * SOC timer value at TSF capture 4022 * @QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST: after last 4023 * @QCA_WLAN_VENDOR_ATTR_TSF_MAX: Max value 4024 */ 4025 enum qca_vendor_attr_tsf_cmd { 4026 QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0, 4027 QCA_WLAN_VENDOR_ATTR_TSF_CMD, 4028 QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE, 4029 QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE, 4030 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST, 4031 QCA_WLAN_VENDOR_ATTR_TSF_MAX = 4032 QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1 4033 }; 4034 4035 /** 4036 * enum qca_tsf_operation: TSF driver commands 4037 * @QCA_TSF_CAPTURE: Initiate TSF Capture 4038 * @QCA_TSF_GET: Get TSF capture value 4039 * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value 4040 */ 4041 enum qca_tsf_cmd { 4042 QCA_TSF_CAPTURE, 4043 QCA_TSF_GET, 4044 QCA_TSF_SYNC_GET, 4045 }; 4046 4047 /** 4048 * enum qca_vendor_attr_get_preferred_freq_list - get preferred channel list 4049 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID: invalid value 4050 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE: interface type 4051 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST: preferred frequency list 4052 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST: after last 4053 * @QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX: max 4054 */ 4055 enum qca_vendor_attr_get_preferred_freq_list { 4056 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID, 4057 /* A 32-unsigned value; the interface type/mode for which the preferred 4058 * frequency list is requested (see enum qca_iface_type for possible 4059 * values); used in both south- and north-bound. 4060 */ 4061 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE, 4062 /* An array of 32-unsigned values; values are frequency (MHz); used 4063 * in north-bound only. 4064 */ 4065 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST, 4066 /* keep last */ 4067 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST, 4068 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX = 4069 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1 4070 }; 4071 4072 /** 4073 * enum qca_vendor_attr_probable_oper_channel - channel hint 4074 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID: invalid value 4075 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE: interface type 4076 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ: frequency hint value 4077 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST: last 4078 * @QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX: max 4079 */ 4080 enum qca_vendor_attr_probable_oper_channel { 4081 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID, 4082 /* 32-bit unsigned value; indicates the connection/iface type likely to 4083 * come on this channel (see enum qca_iface_type). 4084 */ 4085 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE, 4086 /* 32-bit unsigned value; the frequency (MHz) of the probable channel */ 4087 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ, 4088 /* keep last */ 4089 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST, 4090 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX = 4091 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1 4092 }; 4093 4094 /** 4095 * enum qca_wlan_vendor_attr_gw_param_config - gateway param config 4096 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID: Invalid 4097 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR: gateway mac addr 4098 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR: ipv4 addr 4099 * @QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR: ipv6 addr 4100 */ 4101 enum qca_wlan_vendor_attr_gw_param_config { 4102 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_INVALID = 0, 4103 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_GW_MAC_ADDR, 4104 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV4_ADDR, 4105 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_IPV6_ADDR, 4106 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST, 4107 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_MAX = 4108 QCA_WLAN_VENDOR_ATTR_GW_PARAM_CONFIG_AFTER_LAST - 1, 4109 }; 4110 4111 /** 4112 * enum drv_dbs_capability - DBS capability 4113 * @DRV_DBS_CAPABILITY_DISABLED: DBS disabled 4114 * @DRV_DBS_CAPABILITY_1X1: 1x1 4115 * @DRV_DBS_CAPABILITY_2X2: 2x2 4116 */ 4117 enum drv_dbs_capability { 4118 DRV_DBS_CAPABILITY_DISABLED, /* not supported or disabled */ 4119 DRV_DBS_CAPABILITY_1X1, 4120 DRV_DBS_CAPABILITY_2X2, 4121 }; 4122 4123 /** 4124 * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease 4125 * 4126 * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB. 4127 */ 4128 enum qca_vendor_attr_txpower_decr_db { 4129 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, 4130 /* 4131 * 8-bit unsigned value to indicate the reduction of TX power in dB for 4132 * a virtual interface. 4133 */ 4134 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, 4135 /* keep last */ 4136 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, 4137 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX = 4138 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1 4139 }; 4140 4141 /** 4142 * enum qca_vendor_attr_ota_test - Enable OTA test 4143 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID: invalid value 4144 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable OTA test 4145 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST: after last 4146 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX: max 4147 */ 4148 enum qca_vendor_attr_ota_test { 4149 QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID, 4150 /* 8-bit unsigned value to indicate if OTA test is enabled */ 4151 QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE, 4152 /* keep last */ 4153 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST, 4154 QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX = 4155 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1 4156 }; 4157 4158 /** enum qca_vendor_attr_txpower_scale - vendor sub commands index 4159 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID: invalid value 4160 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value 4161 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST: last value 4162 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX: max value 4163 */ 4164 enum qca_vendor_attr_txpower_scale { 4165 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID, 4166 /* 8-bit unsigned value to indicate the scaling of tx power */ 4167 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE, 4168 /* keep last */ 4169 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST, 4170 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX = 4171 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1 4172 }; 4173 4174 /** 4175 * enum qca_vendor_attr_txpower_scale_decr_db - vendor sub commands index 4176 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID: invalid value 4177 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB: scaling value 4178 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST: last value 4179 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX: max value 4180 */ 4181 enum qca_vendor_attr_txpower_scale_decr_db { 4182 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_INVALID, 4183 /* 8-bit unsigned value to indicate the scaling of tx power */ 4184 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB, 4185 /* keep last */ 4186 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST, 4187 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_MAX = 4188 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB_AFTER_LAST - 1 4189 }; 4190 4191 /** 4192 * enum dfs_mode - state of DFS mode 4193 * @DFS_MODE_NONE: DFS mode attribute is none 4194 * @DFS_MODE_ENABLE: DFS mode is enabled 4195 * @DFS_MODE_DISABLE: DFS mode is disabled 4196 * @DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in scanning 4197 */ 4198 enum dfs_mode { 4199 DFS_MODE_NONE, 4200 DFS_MODE_ENABLE, 4201 DFS_MODE_DISABLE, 4202 DFS_MODE_DEPRIORITIZE 4203 }; 4204 4205 /** 4206 * enum qca_wlan_vendor_attr_acs_config - Config params for ACS 4207 * @QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID: Invalid 4208 * @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Dfs mode for ACS 4209 * QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: channel_hint for ACS 4210 * QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST: after_last 4211 * QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX: max attribute 4212 */ 4213 enum qca_wlan_vendor_attr_acs_config { 4214 QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0, 4215 QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE, 4216 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT, 4217 4218 QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST, 4219 QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX = 4220 QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1, 4221 4222 }; 4223 4224 /** 4225 * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability 4226 */ 4227 enum qca_wlan_vendor_attr_get_hw_capability { 4228 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID, 4229 /* 4230 * Antenna isolation 4231 * An attribute used in the response. 4232 * The content of this attribute is encoded in a byte array. Each byte 4233 * value is an antenna isolation value. The array length is the number 4234 * of antennas. 4235 */ 4236 QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION, 4237 /* 4238 * Request HW capability 4239 * An attribute used in the request. 4240 * The content of this attribute is a u32 array for one or more of 4241 * hardware capabilities (attribute IDs) that are being requested. Each 4242 * u32 value has a value from this 4243 * enum qca_wlan_vendor_attr_get_hw_capability 4244 * identifying which capabilities are requested. 4245 */ 4246 QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY, 4247 4248 /* keep last */ 4249 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST, 4250 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX = 4251 QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1, 4252 }; 4253 4254 /** 4255 * enum qca_wlan_vendor_attr_sta_connect_roam_policy_config - 4256 * config params for sta roam policy 4257 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID: Invalid 4258 * @QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE: If sta should skip Dfs channels 4259 * @QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL: 4260 * If sta should skip unsafe channels or not in scanning 4261 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_LAST: 4262 * @QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX: max attribute 4263 */ 4264 enum qca_wlan_vendor_attr_sta_connect_roam_policy_config { 4265 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_INVALID = 0, 4266 QCA_WLAN_VENDOR_ATTR_STA_DFS_MODE, 4267 QCA_WLAN_VENDOR_ATTR_STA_SKIP_UNSAFE_CHANNEL, 4268 4269 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST, 4270 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_MAX = 4271 QCA_WLAN_VENDOR_ATTR_STA_CONNECT_ROAM_POLICY_AFTER_LAST - 1, 4272 }; 4273 4274 /* Attributes for FTM commands and events */ 4275 4276 /** 4277 * enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities 4278 * 4279 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See 4280 * enum qca_wlan_vendor_attr_loc_capa_flags. 4281 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number 4282 * of measurement sessions that can run concurrently. 4283 * Default is one session (no session concurrency). 4284 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique 4285 * peers that are supported in running sessions. For example, 4286 * if the value is 8 and maximum number of sessions is 2, you can 4287 * have one session with 8 unique peers, or 2 sessions with 4 unique 4288 * peers each, and so on. 4289 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number 4290 * of bursts per peer, as an exponent (2^value). Default is 0, 4291 * meaning no multi-burst support. 4292 * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number 4293 * of measurement exchanges allowed in a single burst. 4294 * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement 4295 * types. A bit mask (unsigned 32 bit value), each bit corresponds 4296 * to an AOA type as defined by enum qca_vendor_attr_aoa_type. 4297 */ 4298 enum qca_wlan_vendor_attr_loc_capa { 4299 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID, 4300 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS, 4301 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS, 4302 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS, 4303 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP, 4304 QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST, 4305 QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES, 4306 /* keep last */ 4307 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST, 4308 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX = 4309 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1, 4310 }; 4311 4312 /** 4313 * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags 4314 * 4315 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver 4316 * can be configured as an FTM responder (for example, an AP that 4317 * services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER 4318 * will be supported if set. 4319 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver 4320 * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION 4321 * will be supported if set. 4322 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder 4323 * supports immediate (ASAP) response. 4324 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone 4325 * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS. 4326 * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports 4327 * requesting AOA measurements as part of an FTM session. 4328 */ 4329 enum qca_wlan_vendor_attr_loc_capa_flags { 4330 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0, 4331 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1, 4332 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2, 4333 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3, 4334 QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4, 4335 }; 4336 4337 /** 4338 * enum qca_wlan_vendor_attr_sap_config - config params for sap configuration 4339 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID: invalid 4340 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Channel on which SAP should start 4341 * @QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST: List of frequencies on 4342 * which AP is expected to operate. This is irrespective of ACS configuration. 4343 * This list is a priority based one and is looked for before the AP is created 4344 * to ensure the best concurrency sessions (avoid MCC and use DBS/SCC) co-exist 4345 * in the system. 4346 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST: after last 4347 * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX: max attribute 4348 */ 4349 enum qca_wlan_vendor_attr_sap_config { 4350 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0, 4351 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL, 4352 QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2, 4353 /* keep last */ 4354 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST, 4355 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX = 4356 QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1, 4357 }; 4358 4359 /** 4360 * enum qca_wlan_vendor_attr_ftm_peer_info: Information about 4361 * a single peer in a measurement session. 4362 * 4363 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer. 4364 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related 4365 * to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags. 4366 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of 4367 * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0 4368 * 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for 4369 * list of supported attributes. 4370 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for 4371 * secure measurement. 4372 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA 4373 * measurement every <value> bursts. If 0 or not specified, 4374 * AOA measurements will be disabled for this peer. 4375 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where 4376 * the measurement frames are exchanged. Optional; if not 4377 * specified, try to locate the peer in the kernel scan 4378 * results cache and use frequency from there. 4379 */ 4380 enum qca_wlan_vendor_attr_ftm_peer_info { 4381 QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID, 4382 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR, 4383 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS, 4384 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS, 4385 QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID, 4386 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD, 4387 QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ, 4388 /* keep last */ 4389 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST, 4390 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX = 4391 QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1, 4392 }; 4393 4394 /** 4395 * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags, 4396 * per-peer 4397 * 4398 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request 4399 * immediate (ASAP) response from peer. 4400 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request 4401 * LCI report from peer. The LCI report includes the absolute 4402 * location of the peer in "official" coordinates (similar to GPS). 4403 * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information. 4404 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request 4405 * Location civic report from peer. The LCR includes the location 4406 * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0, 4407 * 11.24.6.7 for more information. 4408 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set, 4409 * request a secure measurement. 4410 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided. 4411 */ 4412 enum qca_wlan_vendor_attr_ftm_peer_meas_flags { 4413 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0, 4414 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1, 4415 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2, 4416 QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3, 4417 }; 4418 4419 /** 4420 * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters 4421 * 4422 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements 4423 * to perform in a single burst. 4424 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to 4425 * perform, specified as an exponent (2^value). 4426 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst 4427 * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. 4428 * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts, 4429 * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must 4430 * be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION. 4431 */ 4432 enum qca_wlan_vendor_attr_ftm_meas_param { 4433 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID, 4434 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST, 4435 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP, 4436 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION, 4437 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD, 4438 /* keep last */ 4439 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST, 4440 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX = 4441 QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1, 4442 }; 4443 4444 /** 4445 * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results 4446 * 4447 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported 4448 * peer. 4449 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement 4450 * request for this peer. 4451 * See enum qca_wlan_vendor_attr_ftm_peer_result_status. 4452 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related 4453 * to measurement results for this peer. 4454 * See enum qca_wlan_vendor_attr_ftm_peer_result_flags. 4455 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when 4456 * request failed and peer requested not to send an additional request 4457 * for this number of seconds. 4458 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received 4459 * from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 4460 * 9.4.2.22.10. 4461 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when 4462 * received from peer. In the format specified by IEEE P802.11-REVmc/D7.0, 4463 * 9.4.2.22.13. 4464 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer 4465 * overridden some measurement request parameters. See 4466 * enum qca_wlan_vendor_attr_ftm_meas_param. 4467 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement 4468 * for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. 4469 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement 4470 * results. Each entry is a nested attribute defined 4471 * by enum qca_wlan_vendor_attr_ftm_meas. 4472 */ 4473 enum qca_wlan_vendor_attr_ftm_peer_result { 4474 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID, 4475 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR, 4476 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS, 4477 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS, 4478 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS, 4479 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI, 4480 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR, 4481 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS, 4482 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS, 4483 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS, 4484 /* keep last */ 4485 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST, 4486 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX = 4487 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1, 4488 }; 4489 4490 /** 4491 * enum qca_wlan_vendor_attr_ftm_peer_result_status 4492 * 4493 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results 4494 * will be provided. Peer may have overridden some measurement parameters, 4495 * in which case overridden parameters will be report by 4496 * QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute. 4497 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable 4498 * of performing the measurement request. No more results will be sent 4499 * for this peer in this session. 4500 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request 4501 * failed, and requested not to send an additional request for number 4502 * of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS 4503 * attribute. 4504 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation 4505 * failed. Request was not sent over the air. 4506 */ 4507 enum qca_wlan_vendor_attr_ftm_peer_result_status { 4508 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK, 4509 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE, 4510 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED, 4511 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID, 4512 }; 4513 4514 /** 4515 * enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags 4516 * for measurement result, per-peer 4517 * 4518 * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set, 4519 * measurement completed for this peer. No more results will be reported 4520 * for this peer in this session. 4521 */ 4522 enum qca_wlan_vendor_attr_ftm_peer_result_flags { 4523 QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0, 4524 }; 4525 4526 /** 4527 * enum qca_vendor_attr_loc_session_status: Session completion status code 4528 * 4529 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed 4530 * successfully. 4531 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted 4532 * by request. 4533 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request 4534 * was invalid and was not started. 4535 * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error 4536 * and did not complete normally (for example out of resources). 4537 */ 4538 enum qca_vendor_attr_loc_session_status { 4539 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK, 4540 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED, 4541 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID, 4542 QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED, 4543 }; 4544 4545 /** 4546 * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data 4547 * 4548 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as 4549 * recorded by responder, in picoseconds. 4550 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4551 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at 4552 * initiator, in picoseconds. 4553 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4554 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by 4555 * initiator, in picoseconds. 4556 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4557 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at 4558 * responder, in picoseconds. 4559 * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. 4560 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded 4561 * during this measurement exchange. Optional and will be provided if 4562 * the hardware can measure it. 4563 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by 4564 * responder. Not always provided. 4565 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4566 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by 4567 * responder. Not always provided. 4568 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4569 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by 4570 * initiator. Not always provided. 4571 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4572 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by 4573 * initiator. Not always provided. 4574 * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. 4575 * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding. 4576 */ 4577 enum qca_wlan_vendor_attr_ftm_meas { 4578 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID, 4579 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1, 4580 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2, 4581 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3, 4582 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4, 4583 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI, 4584 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR, 4585 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR, 4586 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR, 4587 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR, 4588 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD, 4589 /* keep last */ 4590 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST, 4591 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX = 4592 QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1, 4593 }; 4594 4595 /** 4596 * enum qca_wlan_vendor_attr_p2p_listen_offload - vendor sub commands index 4597 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID: invalid value 4598 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL: 4599 * A 32-bit unsigned value; the P2P listen frequency (MHz); must be one 4600 * of the social channels. 4601 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD: listen offload period 4602 * A 32-bit unsigned value; the P2P listen offload period (ms). 4603 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL: 4604 * A 32-bit unsigned value; the P2P listen interval duration (ms). 4605 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT: 4606 * A 32-bit unsigned value; number of interval times the Firmware needs 4607 * to run the offloaded P2P listen operation before it stops. 4608 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES: device types 4609 * An array of unsigned 8-bit characters; vendor information elements. 4610 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE: vendor IEs 4611 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG: control flag for FW 4612 * A 32-bit unsigned value; a control flag to indicate whether listen 4613 * results need to be flushed to wpa_supplicant. 4614 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON: offload stop reason 4615 * A 8-bit unsigned value; reason code for P2P listen offload stop 4616 * event. 4617 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST: last value 4618 * @QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX: max value 4619 */ 4620 enum qca_wlan_vendor_attr_p2p_listen_offload { 4621 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0, 4622 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL, 4623 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD, 4624 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL, 4625 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT, 4626 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES, 4627 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE, 4628 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG, 4629 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON, 4630 /* keep last */ 4631 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST, 4632 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX = 4633 QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1 4634 }; 4635 4636 /** 4637 * enum qca_wlan_vendor_drv_info - WLAN driver info 4638 * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID: Invalid 4639 * @QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE: Maximum Message size info 4640 * between Firmware & Host. 4641 */ 4642 enum qca_wlan_vendor_drv_info { 4643 QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0, 4644 QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE, 4645 4646 /* keep last */ 4647 QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST, 4648 QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX = 4649 QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1, 4650 }; 4651 4652 /** 4653 * enum qca_wlan_vendor_attr_aoa_type - AOA measurement type 4654 * 4655 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest 4656 * CIR (channel impulse response) path for each antenna. 4657 * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude 4658 * of the strongest CIR path for each antenna. 4659 */ 4660 enum qca_wlan_vendor_attr_aoa_type { 4661 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE, 4662 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP, 4663 QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX 4664 }; 4665 4666 /** 4667 * enum qca_wlan_vendor_attr_encryption_test - Attributes to 4668 * validate encryption engine 4669 * 4670 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute. 4671 * This will be included if the request is for decryption; if not included, 4672 * the request is treated as a request for encryption by default. 4673 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value 4674 * indicating the key cipher suite. Takes same values as 4675 * NL80211_ATTR_KEY_CIPHER. 4676 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value 4677 * Key Id to be used for encryption 4678 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values. 4679 * Key (TK) to be used for encryption/decryption 4680 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values. 4681 * Packet number to be specified for encryption/decryption 4682 * 6 bytes for TKIP/CCMP/GCMP. 4683 * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values 4684 * representing the 802.11 packet (header + payload + FCS) that 4685 * needs to be encrypted/decrypted. 4686 * Encrypted/decrypted response from the driver will also be sent 4687 * to userspace with the same attribute. 4688 */ 4689 enum qca_wlan_vendor_attr_encryption_test { 4690 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0, 4691 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION, 4692 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER, 4693 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID, 4694 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK, 4695 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN, 4696 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA, 4697 4698 /* keep last */ 4699 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST, 4700 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX = 4701 QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1 4702 }; 4703 4704 /** 4705 * enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of 4706 * sector for DMG RF sector operations. 4707 * 4708 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector 4709 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector 4710 */ 4711 enum qca_wlan_vendor_attr_dmg_rf_sector_type { 4712 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX, 4713 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX, 4714 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX 4715 }; 4716 4717 /** 4718 * BRP antenna limit mode 4719 * 4720 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force 4721 * antenna limit, BRP will be performed as usual. 4722 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE: Define maximal 4723 * antennas limit. the hardware may use less antennas than the 4724 * maximum limit. 4725 * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE: The hardware will 4726 * use exactly the specified number of antennas for BRP. 4727 */ 4728 enum qca_wlan_vendor_attr_brp_ant_limit_mode { 4729 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE, 4730 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE, 4731 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE, 4732 QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_MAX 4733 }; 4734 4735 /** 4736 * enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for 4737 * DMG RF sector configuration for a single RF module. 4738 * The values are defined in a compact way which closely matches 4739 * the way it is stored in HW registers. 4740 * The configuration provides values for 32 antennas and 8 distribution 4741 * amplifiers, and together describes the characteristics of the RF 4742 * sector - such as a beam in some direction with some gain. 4743 * 4744 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index 4745 * of RF module for this configuration. 4746 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge 4747 * amplifier gain index. Unsigned 32 bit number containing 4748 * bits for all 32 antennas. 4749 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge 4750 * amplifier gain index. Unsigned 32 bit number containing 4751 * bits for all 32 antennas. 4752 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge 4753 * amplifier gain index. Unsigned 32 bit number containing 4754 * bits for all 32 antennas. 4755 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values 4756 * for first 16 antennas, 2 bits per antenna. 4757 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values 4758 * for last 16 antennas, 2 bits per antenna. 4759 * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains 4760 * DTYPE values (3 bits) for each distribution amplifier, followed 4761 * by X16 switch bits for each distribution amplifier. There are 4762 * total of 8 distribution amplifiers. 4763 */ 4764 enum qca_wlan_vendor_attr_dmg_rf_sector_cfg { 4765 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0, 4766 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1, 4767 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2, 4768 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3, 4769 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4, 4770 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5, 4771 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6, 4772 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7, 4773 4774 /* keep last */ 4775 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST, 4776 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX = 4777 QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1 4778 }; 4779 4780 /** 4781 * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for 4782 * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS configuration to the host driver. 4783 * 4784 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger 4785 * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode 4786 * represents the different TDLS trigger modes. 4787 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within 4788 * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number 4789 * of packets shall meet the criteria for implicit TDLS setup. 4790 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx 4791 * packets within a duration. 4792 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD to initiate 4793 * a TDLS setup. 4794 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to inititate 4795 * a TDLS Discovery to the Peer. 4796 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of 4797 * discovery attempts to know the TDLS capability of the peer. A peer is 4798 * marked as TDLS not capable if there is no response for all the attempts. 4799 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32) 4800 * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD 4801 * number of TX / RX frames meet the criteria for TDLS teardown. 4802 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number 4803 * (u32) of Tx/Rx packets within a duration 4804 * CA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link 4805 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold 4806 * corresponding to the RSSI of the peer below which a TDLS 4807 * setup is triggered. 4808 * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold 4809 * corresponding to the RSSI of the peer above which 4810 * a TDLS teardown is triggered. 4811 */ 4812 enum qca_wlan_vendor_attr_tdls_configuration { 4813 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0, 4814 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1, 4815 4816 /* Attributes configuring the TDLS Implicit Trigger */ 4817 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2, 4818 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3, 4819 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4, 4820 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5, 4821 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6, 4822 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7, 4823 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8, 4824 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9, 4825 4826 /* keep last */ 4827 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST, 4828 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX = 4829 QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1 4830 }; 4831 4832 /** 4833 * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in 4834 * the driver. 4835 * 4836 * The following are the different values for 4837 * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE. 4838 * 4839 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to 4840 * initiate/teardown the TDLS connection to a respective peer comes 4841 * from the user space. wpa_supplicant provides the commands 4842 * TDLS_SETUP, TDLS_TEARDOWN, TDLS_DISCOVER to do this. 4843 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS 4844 * setup/teardown to the eligible peer once the configured criteria 4845 * (such as TX/RX threshold, RSSI) is met. The attributes 4846 * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to 4847 * the different configuration criteria for the TDLS trigger from the 4848 * host driver. 4849 * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger 4850 * the TDLS setup / teardown through the implicit mode, only to the 4851 * configured MAC addresses(wpa_supplicant, with tdls_external_control = 1, 4852 * configures the MAC address through TDLS_SETUP/TDLS_TEARDOWN commands). 4853 * External mode works on top of the implicit mode, thus the host Driver 4854 * is expected to be configured in TDLS Implicit mode too to operate in 4855 * External mode. Configuring External mode alone without Implicit 4856 * mode is invalid. 4857 * 4858 * All the above implementations work as expected only when the host driver 4859 * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - 4860 * representing that the TDLS message exchange is not internal to the host 4861 * driver, but depends on wpa_supplicant to do the message exchange. 4862 */ 4863 enum qca_wlan_vendor_tdls_trigger_mode { 4864 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0, 4865 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1, 4866 QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2, 4867 }; 4868 4869 /** 4870 * enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits 4871 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0 4872 * that is hard-coded in the Board Data File (BDF). 4873 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1 4874 * that is hard-coded in the Board Data File (BDF). 4875 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2 4876 * that is hard-coded in the Board Data File (BDF). 4877 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3 4878 * that is hard-coded in the Board Data File (BDF). 4879 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4 4880 * that is hard-coded in the Board Data File (BDF). 4881 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any 4882 * source of SAR power limits, thereby disabling the SAR power 4883 * limit feature. 4884 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power 4885 * limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. 4886 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0: Select the SAR power 4887 * limits version 2.0 configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. 4888 * 4889 * This enumerates the valid set of values that may be supplied for 4890 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of 4891 * the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command or in 4892 * the response to an instance of the 4893 * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. 4894 */ 4895 enum qca_vendor_attr_sar_limits_selections { 4896 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0, 4897 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1, 4898 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2, 4899 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3, 4900 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4, 4901 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5, 4902 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6, 4903 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0 = 7, 4904 }; 4905 4906 /** 4907 * enum qca_vendor_attr_sar_limits_spec_modulations - 4908 * SAR limits specification modulation 4909 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK - 4910 * CCK modulation 4911 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM - 4912 * OFDM modulation 4913 * 4914 * This enumerates the valid set of values that may be supplied for 4915 * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an 4916 * instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an 4917 * instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor 4918 * command or in the response to an instance of the 4919 * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. 4920 */ 4921 enum qca_vendor_attr_sar_limits_spec_modulations { 4922 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0, 4923 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1, 4924 }; 4925 4926 /** 4927 * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits 4928 * 4929 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to 4930 * select which SAR power limit table should be used. Valid 4931 * values are enumerated in enum 4932 * %qca_vendor_attr_sar_limits_selections. The existing SAR 4933 * power limit selection is unchanged if this attribute is not 4934 * present. 4935 * 4936 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value 4937 * which specifies the number of SAR power limit specifications 4938 * which will follow. 4939 * 4940 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power 4941 * limit specifications. The number of specifications is 4942 * specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each 4943 * specification contains a set of 4944 * QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A 4945 * specification is uniquely identified by the attributes 4946 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND, 4947 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and 4948 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always 4949 * contains as a payload the attribute 4950 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT. 4951 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX. 4952 * Either %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT or 4953 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX is 4954 * needed based upon the value of 4955 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE. 4956 * 4957 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to 4958 * indicate for which band this specification applies. Valid 4959 * values are enumerated in enum %nl80211_band (although not all 4960 * bands may be supported by a given device). If the attribute is 4961 * not supplied then the specification will be applied to all 4962 * supported bands. 4963 * 4964 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value 4965 * to indicate for which antenna chain this specification 4966 * applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the 4967 * attribute is not supplied then the specification will be 4968 * applied to all chains. 4969 * 4970 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32) 4971 * value to indicate for which modulation scheme this 4972 * specification applies. Valid values are enumerated in enum 4973 * %qca_vendor_attr_sar_limits_spec_modulations. If the attribute 4974 * is not supplied then the specification will be applied to all 4975 * modulation schemes. 4976 * 4977 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32) 4978 * value to specify the actual power limit value in units of 0.5 4979 * dBm (i.e., a value of 11 represents 5.5 dBm). 4980 * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is 4981 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER. 4982 * 4983 * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX: Required (u32) 4984 * value to indicate SAR V2 indices (0 - 11) to select SAR V2 profiles. 4985 * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is 4986 * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0. 4987 * 4988 * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS 4989 * and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS. 4990 */ 4991 enum qca_vendor_attr_sar_limits { 4992 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0, 4993 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1, 4994 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2, 4995 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3, 4996 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4, 4997 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5, 4998 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6, 4999 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7, 5000 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX = 8, 5001 5002 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST, 5003 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX = 5004 QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1 5005 }; 5006 5007 /** 5008 * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring 5009 * offload which is an extension for LL_STATS. 5010 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms. 5011 * If MAC counters do not exceed the threshold, FW will report monitored 5012 * link layer counters periodically as this setting. The first report is 5013 * always triggered by this timer. 5014 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99). 5015 * For each MAC layer counter, FW holds two copies. One is the current value. 5016 * The other is the last report. Once a current counter's increment is larger 5017 * than the threshold, FW will indicate that counter to host even if the 5018 * monitoring timer does not expire. 5019 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change 5020 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU 5021 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same 5022 * failure code. 5023 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code 5024 * 1: TX packet discarded 5025 * 2: No ACK 5026 * 3: Postpone 5027 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address 5028 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state 5029 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold. 5030 * Threshold for all monitored parameters. If per counter dedicated threshold 5031 * is not enabled, this threshold will take effect. 5032 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this 5033 * event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0. 5034 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID 5035 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID 5036 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters 5037 * Bit0: TX counter unit in MSDU 5038 * Bit1: TX counter unit in MPDU 5039 * Bit2: TX counter unit in PPDU 5040 * Bit3: TX counter unit in byte 5041 * Bit4: Dropped MSDUs 5042 * Bit5: Dropped Bytes 5043 * Bit6: MPDU retry counter 5044 * Bit7: MPDU failure counter 5045 * Bit8: PPDU failure counter 5046 * Bit9: MPDU aggregation counter 5047 * Bit10: MCS counter for ACKed MPDUs 5048 * Bit11: MCS counter for Failed MPDUs 5049 * Bit12: TX Delay counter 5050 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters 5051 * Bit0: MAC RX counter unit in MPDU 5052 * Bit1: MAC RX counter unit in byte 5053 * Bit2: PHY RX counter unit in PPDU 5054 * Bit3: PHY RX counter unit in byte 5055 * Bit4: Disorder counter 5056 * Bit5: Retry counter 5057 * Bit6: Duplication counter 5058 * Bit7: Discard counter 5059 * Bit8: MPDU aggregation size counter 5060 * Bit9: MCS counter 5061 * Bit10: Peer STA power state change (wake to sleep) counter 5062 * Bit11: Peer STA power save counter, total time in PS mode 5063 * Bit12: Probe request counter 5064 * Bit13: Other management frames counter 5065 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA 5066 * Bit0: Idle time 5067 * Bit1: TX time 5068 * Bit2: time RX in current bss 5069 * Bit3: Out of current bss time 5070 * Bit4: Wireless medium busy time 5071 * Bit5: RX in bad condition time 5072 * Bit6: TX in bad condition time 5073 * Bit7: time wlan card not available 5074 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal 5075 * Bit0: Per channel SNR counter 5076 * Bit1: Per channel noise floor counter 5077 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers 5078 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels 5079 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats 5080 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats 5081 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats 5082 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs 5083 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs 5084 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs 5085 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data 5086 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets 5087 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped 5088 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK 5089 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed 5090 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed 5091 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM: 5092 * aggregation stats buffer length 5093 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats 5094 * buffer for ACKed MPDUs. 5095 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats 5096 * buffer for failed MPDUs. 5097 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE: 5098 * length of delay stats array. 5099 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats 5100 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs 5101 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs 5102 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats 5103 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received 5104 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received 5105 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received 5106 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received 5107 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost 5108 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets 5109 * flagged as retransmissions 5110 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets 5111 * flagged as duplicated 5112 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX 5113 * packets discarded 5114 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation 5115 * stats buffer. 5116 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs 5117 * stats buffer. 5118 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer 5119 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer 5120 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep 5121 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time 5122 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe 5123 * requests received 5124 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt 5125 * frames received 5126 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time 5127 * there is no TX, nor RX, nor interference. 5128 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time 5129 * transmitting packets. 5130 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time 5131 * for receiving. 5132 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time 5133 * interference detected. 5134 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time 5135 * receiving packets with errors. 5136 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time 5137 * TX no-ACK. 5138 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time 5139 * the chip is unable to work in normal conditions. 5140 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time 5141 * receiving packets in current BSS. 5142 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time 5143 * receiving packets not in current BSS. 5144 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas 5145 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL: 5146 * This is a container for per antenna signal stats. 5147 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value 5148 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value 5149 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon 5150 * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon 5151 */ 5152 enum qca_wlan_vendor_attr_ll_stats_ext { 5153 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0, 5154 5155 /* Attributes for configurations */ 5156 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD, 5157 QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD, 5158 5159 /* Peer STA power state change */ 5160 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG, 5161 5162 /* TX failure event */ 5163 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID, 5164 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU, 5165 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS, 5166 5167 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE, 5168 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS, 5169 5170 /* MAC counters */ 5171 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL, 5172 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE, 5173 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID, 5174 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID, 5175 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP, 5176 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP, 5177 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP, 5178 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP, 5179 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM, 5180 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM, 5181 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS, 5182 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER, 5183 5184 /* Sub-attributes for PEER_AC_TX */ 5185 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU, 5186 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU, 5187 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU, 5188 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES, 5189 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP, 5190 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES, 5191 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY, 5192 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK, 5193 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK, 5194 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM, 5195 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM, 5196 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM, 5197 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR, 5198 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS, 5199 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS, 5200 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE, 5201 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY, 5202 5203 /* Sub-attributes for PEER_AC_RX */ 5204 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU, 5205 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES, 5206 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU, 5207 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES, 5208 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST, 5209 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY, 5210 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP, 5211 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD, 5212 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM, 5213 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM, 5214 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS, 5215 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR, 5216 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES, 5217 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION, 5218 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ, 5219 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT, 5220 5221 /* Sub-attributes for CCA_BSS */ 5222 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME, 5223 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME, 5224 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME, 5225 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY, 5226 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD, 5227 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD, 5228 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL, 5229 5230 /* sub-attribute for BSS_RX_TIME */ 5231 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME, 5232 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME, 5233 5234 /* Sub-attributes for PEER_SIGNAL */ 5235 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM, 5236 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL, 5237 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR, 5238 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF, 5239 5240 /* Sub-attributes for IFACE_BSS */ 5241 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON, 5242 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON, 5243 5244 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST, 5245 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX = 5246 QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1 5247 }; 5248 5249 /** 5250 * qca_wlan_vendor_attr_external_acs_channels: attribute to vendor subcmd 5251 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carry a list of channels 5252 * in priority order as decided after acs operation in userspace. 5253 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: One of reason code from 5254 * qca_wlan_vendor_acs_select_reason. 5255 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_COUNT: Number of channels in 5256 * this list 5257 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Array of nested values 5258 * for each channel with following attributes: 5259 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY, 5260 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY, 5261 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0, 5262 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1, 5263 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH 5264 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Primary channel (u8) 5265 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Secondary channel (u8) 5266 * required only for 160 / 80 + 80 5267 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: VHT seg0 channel (u8) 5268 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: VHT seg1 channel (u8) 5269 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH:channel width (u8) 5270 */ 5271 enum qca_wlan_vendor_attr_external_acs_channels { 5272 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0, 5273 5274 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1, 5275 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2, 5276 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3, 5277 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4, 5278 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5, 5279 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6, 5280 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7, 5281 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8, 5282 5283 /* keep last */ 5284 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST, 5285 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX = 5286 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1 5287 }; 5288 5289 /** 5290 * qca_wlan_vendor_acs_select_reason: This represents the different reasons why 5291 * the ACS has to be triggered. These parameters are used by 5292 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and 5293 * QCA_NL80211_VENDOR_SUBCMD_ACS_SET_CHANNELS 5294 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT: Represents the reason that the 5295 * ACS triggered during the AP start 5296 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS: Represents the reason that 5297 * DFS found with current channel 5298 * @QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX: Represents the reason that 5299 * LTE CO-Exist in current band 5300 */ 5301 enum qca_wlan_vendor_acs_select_reason { 5302 QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT, 5303 QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS, 5304 QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX, 5305 }; 5306 5307 /** 5308 * enum qca_wlan_gpio_attr - Parameters for GPIO configuration 5309 */ 5310 enum qca_wlan_gpio_attr { 5311 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0, 5312 /* Unsigned 32-bit attribute for GPIO command */ 5313 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND, 5314 /* Unsigned 32-bit attribute for GPIO PIN number to configure */ 5315 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM, 5316 /* Unsigned 32-bit attribute for GPIO value to configure */ 5317 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE, 5318 /* Unsigned 32-bit attribute for GPIO pull type */ 5319 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE, 5320 /* Unsigned 32-bit attribute for GPIO interrupt mode */ 5321 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE, 5322 5323 /* keep last */ 5324 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST, 5325 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX = 5326 QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1, 5327 }; 5328 5329 /** 5330 * qca_wlan_set_qdepth_thresh_attr - Parameters for setting 5331 * MSDUQ depth threshold per peer per tid in the target 5332 * 5333 * Associated Vendor Command: 5334 * QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH 5335 */ 5336 enum qca_wlan_set_qdepth_thresh_attr { 5337 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_INVALID = 0, 5338 /* 6-byte MAC address */ 5339 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAC_ADDR, 5340 /* Unsigned 32-bit attribute for holding the TID */ 5341 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_TID, 5342 /* Unsigned 32-bit attribute for holding the update mask 5343 * bit 0 - Update high priority msdu qdepth threshold 5344 * bit 1 - Update low priority msdu qdepth threshold 5345 * bit 2 - Update UDP msdu qdepth threshold 5346 * bit 3 - Update Non UDP msdu qdepth threshold 5347 * rest of bits are reserved 5348 */ 5349 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_UPDATE_MASK, 5350 /* Unsigned 32-bit attribute for holding the threshold value */ 5351 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_VALUE, 5352 5353 /* keep last */ 5354 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST, 5355 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAX = 5356 QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST - 1, 5357 }; 5358 5359 /** 5360 * qca_wlan_vendor_attr_external_acs_policy: Attribute values for 5361 * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to the vendor subcmd 5362 * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This represents the 5363 * external ACS policies to select the channels w.r.t. the PCL weights. 5364 * (QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL represents the channels and 5365 * their PCL weights.) 5366 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY: Mandatory to 5367 * select a channel with non-zero PCL weight. 5368 * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED: Prefer a 5369 * channel with non-zero PCL weight. 5370 * 5371 */ 5372 enum qca_wlan_vendor_attr_external_acs_policy { 5373 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED, 5374 QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY, 5375 }; 5376 5377 /** 5378 * enum qca_wlan_vendor_attr_spectral_scan - Spectral scan config parameters 5379 */ 5380 enum qca_wlan_vendor_attr_spectral_scan { 5381 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INVALID = 0, 5382 /* 5383 * Number of times the chip enters spectral scan mode before 5384 * deactivating spectral scans. When set to 0, chip will enter spectral 5385 * scan mode continuously. u32 attribute. 5386 */ 5387 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_COUNT = 1, 5388 /* 5389 * Spectral scan period. Period increment resolution is 256*Tclk, 5390 * where Tclk = 1/44 MHz (Gmode), 1/40 MHz (Amode). u32 attribute. 5391 */ 5392 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_PERIOD = 2, 5393 /* Spectral scan priority. u32 attribute. */ 5394 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PRIORITY = 3, 5395 /* Number of FFT data points to compute. u32 attribute. */ 5396 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_SIZE = 4, 5397 /* 5398 * Enable targeted gain change before starting the spectral scan FFT. 5399 * u32 attribute. 5400 */ 5401 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_GC_ENA = 5, 5402 /* Restart a queued spectral scan. u32 attribute. */ 5403 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RESTART_ENA = 6, 5404 /* 5405 * Noise floor reference number for the calculation of bin power. 5406 * u32 attribute. 5407 */ 5408 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NOISE_FLOOR_REF = 7, 5409 /* 5410 * Disallow spectral scan triggers after TX/RX packets by setting 5411 * this delay value to roughly SIFS time period or greater. 5412 * u32 attribute. 5413 */ 5414 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INIT_DELAY = 8, 5415 /* 5416 * Number of strong bins (inclusive) per sub-channel, below 5417 * which a signal is declared a narrow band tone. u32 attribute. 5418 */ 5419 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NB_TONE_THR = 9, 5420 /* 5421 * Specify the threshold over which a bin is declared strong (for 5422 * scan bandwidth analysis). u32 attribute. 5423 */ 5424 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_STR_BIN_THR = 10, 5425 /* Spectral scan report mode. u32 attribute. */ 5426 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_WB_RPT_MODE = 11, 5427 /* 5428 * RSSI report mode, if the ADC RSSI is below 5429 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR, 5430 * then FFTs will not trigger, but timestamps and summaries get 5431 * reported. u32 attribute. 5432 */ 5433 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_RPT_MODE = 12, 5434 /* 5435 * ADC RSSI must be greater than or equal to this threshold (signed dB) 5436 * to ensure spectral scan reporting with normal error code. 5437 * u32 attribute. 5438 */ 5439 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR = 13, 5440 /* 5441 * Format of frequency bin magnitude for spectral scan triggered FFTs: 5442 * 0: linear magnitude, 1: log magnitude (20*log10(lin_mag)). 5443 * u32 attribute. 5444 */ 5445 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PWR_FORMAT = 14, 5446 /* 5447 * Format of FFT report to software for spectral scan triggered FFTs. 5448 * 0: No FFT report (only spectral scan summary report) 5449 * 1: 2-dword summary of metrics for each completed FFT + spectral scan 5450 * report 5451 * 2: 2-dword summary of metrics for each completed FFT + 1x-oversampled 5452 * bins (in-band) per FFT + spectral scan summary report 5453 * 3: 2-dword summary of metrics for each completed FFT + 2x-oversampled 5454 * bins (all) per FFT + spectral scan summary report 5455 * u32 attribute. 5456 */ 5457 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RPT_MODE = 15, 5458 /* 5459 * Number of LSBs to shift out in order to scale the FFT bins. 5460 * u32 attribute. 5461 */ 5462 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BIN_SCALE = 16, 5463 /* 5464 * Set to 1 (with spectral_scan_pwr_format=1), to report bin magnitudes 5465 * in dBm power. u32 attribute. 5466 */ 5467 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DBM_ADJ = 17, 5468 /* 5469 * Per chain enable mask to select input ADC for search FFT. 5470 * u32 attribute. 5471 */ 5472 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_CHN_MASK = 18, 5473 /* 5474 * An unsigned 64-bit integer provided by host driver to identify the 5475 * spectral scan request. This attribute is included in the scan 5476 * response message for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START 5477 * and used as an attribute in 5478 * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP to identify the 5479 * specific scan to be stopped. 5480 */ 5481 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19, 5482 /* Skip interval for FFT reports. u32 attribute */ 5483 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20, 5484 /* Set to report only one set of FFT results. 5485 * u32 attribute. 5486 */ 5487 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21, 5488 /* Debug level for spectral module in driver. 5489 * 0 : Verbosity level 0 5490 * 1 : Verbosity level 1 5491 * 2 : Verbosity level 2 5492 * 3 : Matched filterID display 5493 * 4 : One time dump of FFT report 5494 * u32 attribute. 5495 */ 5496 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22, 5497 /* Type of spectral scan request. u32 attribute. 5498 * It uses values defined in enum 5499 * qca_wlan_vendor_attr_spectral_scan_request_type. 5500 */ 5501 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23, 5502 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST, 5503 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX = 5504 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1, 5505 }; 5506 5507 /** 5508 * enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command 5509 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS. 5510 */ 5511 enum qca_wlan_vendor_attr_spectral_diag_stats { 5512 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0, 5513 /* Number of spectral TLV signature mismatches. 5514 * u64 attribute. 5515 */ 5516 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1, 5517 /* Number of spectral phyerror events with insufficient length when 5518 * parsing for secondary 80 search FFT report. u64 attribute. 5519 */ 5520 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2, 5521 /* Number of spectral phyerror events without secondary 80 5522 * search FFT report. u64 attribute. 5523 */ 5524 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3, 5525 /* Number of spectral phyerror events with vht operation segment 1 id 5526 * mismatches in search fft report. u64 attribute. 5527 */ 5528 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4, 5529 /* Number of spectral phyerror events with vht operation segment 2 id 5530 * mismatches in search fft report. u64 attribute. 5531 */ 5532 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5, 5533 5534 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST, 5535 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX = 5536 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1, 5537 }; 5538 5539 /** 5540 * enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command 5541 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. 5542 */ 5543 enum qca_wlan_vendor_attr_spectral_cap { 5544 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0, 5545 /* Flag attribute to indicate phydiag capability */ 5546 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1, 5547 /* Flag attribute to indicate radar detection capability */ 5548 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2, 5549 /* Flag attribute to indicate spectral capability */ 5550 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3, 5551 /* Flag attribute to indicate advanced spectral capability */ 5552 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4, 5553 /* Spectral hardware generation. u32 attribute. 5554 * It uses values defined in enum 5555 * qca_wlan_vendor_spectral_scan_cap_hw_gen. 5556 */ 5557 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5, 5558 5559 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST, 5560 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX = 5561 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1, 5562 }; 5563 5564 /** 5565 * enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command 5566 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. 5567 */ 5568 enum qca_wlan_vendor_attr_spectral_scan_status { 5569 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0, 5570 /* Flag attribute to indicate whether spectral scan is enabled */ 5571 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1, 5572 /* Flag attribute to indicate whether spectral scan is in progress*/ 5573 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2, 5574 5575 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST, 5576 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX = 5577 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1, 5578 }; 5579 5580 /** 5581 * enum qca_wlan_vendor_attr_config_latency_level - Level for 5582 * wlan latency module. 5583 * 5584 * There will be various of Wi-Fi functionality like scan/roaming/adaptive 5585 * power saving which would causing data exchange out of service, this 5586 * would be a big impact on latency. For latency sensitive applications over 5587 * Wi-Fi are intolerant to such operations and thus would configure them 5588 * to meet their respective needs. It is well understood by such applications 5589 * that altering the default behavior would degrade the Wi-Fi functionality 5590 * w.r.t the above pointed WLAN operations. 5591 * 5592 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL: 5593 * Default WLAN operation level which throughput orientated. 5594 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE: 5595 * Use moderate level to improve latency by limit scan duration. 5596 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW: 5597 * Use low latency level to benifit application like concurrent 5598 * downloading or video streaming via constraint scan/adaptive PS. 5599 * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW: 5600 * Use ultra low latency level to benefit for gaming/voice 5601 * application via constraint scan/roaming/adaptive PS. 5602 */ 5603 enum qca_wlan_vendor_attr_config_latency_level { 5604 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_INVALID = 0, 5605 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL = 1, 5606 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE = 2, 5607 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW = 3, 5608 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW = 4, 5609 5610 /* keep last */ 5611 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST, 5612 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MAX = 5613 QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST - 1, 5614 }; 5615 5616 /** 5617 * qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for 5618 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd 5619 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the 5620 * spectral scan request types. 5621 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to 5622 * set the spectral parameters and start scan. 5623 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to 5624 * only set the spectral parameters. 5625 * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to 5626 * only start the spectral scan. 5627 */ 5628 enum qca_wlan_vendor_attr_spectral_scan_request_type { 5629 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG, 5630 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN, 5631 QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG, 5632 }; 5633 5634 /** 5635 * qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for 5636 * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd 5637 * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the 5638 * spectral hardware generation. 5639 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1: generation 1 5640 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2: generation 2 5641 * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3: generation 3 5642 */ 5643 enum qca_wlan_vendor_spectral_scan_cap_hw_gen { 5644 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1 = 0, 5645 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2 = 1, 5646 QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3 = 2, 5647 }; 5648 5649 /** 5650 * enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative 5651 * RF Operating Parameter (RROP) information is available, and if so, at which 5652 * point in the application-driver interaction sequence it can be retrieved by 5653 * the application from the driver. This point may vary by architecture and 5654 * other factors. This is a u16 value. 5655 */ 5656 enum qca_wlan_vendor_attr_rropavail_info { 5657 /* RROP information is unavailable. */ 5658 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE, 5659 /* RROP information is available and the application can retrieve the 5660 * information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS 5661 * event from the driver. 5662 */ 5663 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START, 5664 /* RROP information is available only after a vendor specific scan 5665 * (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has 5666 * successfully completed. The application can retrieve the information 5667 * after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from 5668 * the driver. 5669 */ 5670 QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END, 5671 }; 5672 5673 /** 5674 * enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific 5675 * Representative RF Operating Parameter (RROP) information. It is sent for the 5676 * vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is 5677 * intended for use by external Auto Channel Selection applications. It provides 5678 * guidance values for some RF parameters that are used by the system during 5679 * operation. These values could vary by channel, band, radio, and so on. 5680 */ 5681 enum qca_wlan_vendor_attr_rrop_info { 5682 QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0, 5683 5684 /* Representative Tx Power List (RTPL) which has an array of nested 5685 * values as per attributes in enum qca_wlan_vendor_attr_rtplinst. 5686 */ 5687 QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1, 5688 5689 QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST, 5690 QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX = 5691 QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1 5692 }; 5693 5694 /** 5695 * enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list 5696 * entry instances in the Representative Tx Power List (RTPL). It provides 5697 * simplified power values intended for helping external Auto channel Selection 5698 * applications compare potential Tx power performance between channels, other 5699 * operating conditions remaining identical. These values are not necessarily 5700 * the actual Tx power values that will be used by the system. They are also not 5701 * necessarily the max or average values that will be used. Instead, they are 5702 * relative, summarized keys for algorithmic use computed by the driver or 5703 * underlying firmware considering a number of vendor specific factors. 5704 */ 5705 enum qca_wlan_vendor_attr_rtplinst { 5706 QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0, 5707 5708 /* Primary channel number (u8) */ 5709 QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1, 5710 /* Representative Tx power in dBm (s32) with emphasis on throughput. */ 5711 QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2, 5712 /* Representative Tx power in dBm (s32) with emphasis on range. */ 5713 QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3, 5714 5715 QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST, 5716 QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX = 5717 QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1, 5718 }; 5719 5720 /** 5721 * enum qca_wlan_vendor_attr_mac - Used by the vendor command 5722 * QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. 5723 * 5724 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO: MAC mode info list which has an 5725 * array of nested values as per attributes in 5726 * enum qca_wlan_vendor_attr_mac_mode_info. 5727 */ 5728 enum qca_wlan_vendor_attr_mac { 5729 QCA_WLAN_VENDOR_ATTR_MAC_INVALID = 0, 5730 QCA_WLAN_VENDOR_ATTR_MAC_INFO = 1, 5731 5732 /* keep last */ 5733 QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST, 5734 QCA_WLAN_VENDOR_ATTR_MAC_MAX = 5735 QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST - 1, 5736 }; 5737 5738 /** 5739 * enum qca_wlan_vendor_attr_mac_iface_info - Information of the connected 5740 * WiFi netdev interface on a respective MAC. Used by the attribute 5741 * QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO. 5742 * 5743 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_ID: Wi-Fi Netdev's interface id(u32). 5744 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ: Associated frequency in MHz of 5745 * the connected Wi-Fi interface(u32). 5746 */ 5747 enum qca_wlan_vendor_attr_mac_iface_info { 5748 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_INVALID = 0, 5749 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_IFINDEX = 1, 5750 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ = 2, 5751 5752 /* keep last */ 5753 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST, 5754 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_MAX = 5755 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST - 1, 5756 }; 5757 5758 /** 5759 * enum qca_wlan_vendor_attr_mac_info - Points to MAC the information. 5760 * Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_INFO of the 5761 * vendor command QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. 5762 * 5763 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID: Hardware MAC ID associated for the 5764 * MAC (u32) 5765 * @QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND: Band supported by the respective MAC 5766 * at a given point. This is a u32 bitmask of BIT(NL80211_BAND_*) as described 5767 * in enum nl80211_band. 5768 * @QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO: Refers to list of WLAN net dev 5769 * interfaces associated with this MAC. Represented by enum 5770 * qca_wlan_vendor_attr_mac_iface_info. 5771 */ 5772 enum qca_wlan_vendor_attr_mac_info { 5773 QCA_WLAN_VENDOR_ATTR_MAC_INFO_INVALID = 0, 5774 QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID = 1, 5775 QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND = 2, 5776 QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO = 3, 5777 5778 /* keep last */ 5779 QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST, 5780 QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAX = 5781 QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST - 1, 5782 5783 }; 5784 5785 #if !(defined (SUPPORT_WDEV_CFG80211_VENDOR_EVENT_ALLOC)) && \ 5786 (LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) && \ 5787 !(defined(WITH_BACKPORTS)) 5788 5789 static inline struct sk_buff * 5790 backported_cfg80211_vendor_event_alloc(struct wiphy *wiphy, 5791 struct wireless_dev *wdev, 5792 int approxlen, 5793 int event_idx, gfp_t gfp) 5794 { 5795 struct sk_buff *skb; 5796 5797 skb = cfg80211_vendor_event_alloc(wiphy, approxlen, event_idx, gfp); 5798 5799 if (skb && wdev) { 5800 struct nlattr *attr; 5801 u32 ifindex = wdev->netdev->ifindex; 5802 5803 nla_nest_cancel(skb, ((void **)skb->cb)[2]); 5804 if (nla_put_u32(skb, NL80211_ATTR_IFINDEX, ifindex)) 5805 goto nla_fail; 5806 5807 attr = nla_nest_start(skb, NL80211_ATTR_VENDOR_DATA); 5808 ((void **)skb->cb)[2] = attr; 5809 } 5810 5811 return skb; 5812 5813 nla_fail: 5814 kfree_skb(skb); 5815 5816 return NULL; 5817 } 5818 #define cfg80211_vendor_event_alloc backported_cfg80211_vendor_event_alloc 5819 #endif 5820 5821 /** 5822 * enum he_fragmentation_val - HE fragmentation support values 5823 * Indicates level of dynamic fragmentation that is supported by 5824 * a STA as a recipient. 5825 * HE fragmentation values are defined as per 11ax spec and are used in 5826 * HE capability IE to advertise the support. These values are validated 5827 * in the driver to check the device capability and advertised in the HE 5828 * capability element. 5829 * 5830 * @HE_FRAG_DISABLE: no support for dynamic fragmentation 5831 * @HE_FRAG_LEVEL1: support for dynamic fragments that are 5832 * contained within an MPDU or S-MPDU, no support for dynamic fragments 5833 * within an A-MPDU that is not an S-MPDU. 5834 * @HE_FRAG_LEVEL2: support for dynamic fragments that are 5835 * contained within an MPDU or S-MPDU and support for up to one dynamic 5836 * fragment for each MSDU, each A-MSDU if supported by the recipient, and 5837 * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an 5838 * MPDU or S-MPDU. 5839 * @HE_FRAG_LEVEL3: support for dynamic fragments that are 5840 * contained within an MPDU or S-MPDU and support for multiple dynamic 5841 * fragments for each MSDU and for each A-MSDU if supported by the 5842 * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic 5843 * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU. 5844 */ 5845 enum he_fragmentation_val { 5846 HE_FRAG_DISABLE, 5847 HE_FRAG_LEVEL1, 5848 HE_FRAG_LEVEL2, 5849 HE_FRAG_LEVEL3, 5850 }; 5851 5852 /** 5853 * enum he_mcs_config - HE MCS support configuration 5854 * 5855 * Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth. 5856 * These values are used in driver to configure the HE MCS map to advertise 5857 * Tx/Rx MCS map in HE capability and these values are applied for all the 5858 * streams supported by the device. To configure MCS for different bandwidths, 5859 * vendor command needs to be sent using this attribute with appropriate value. 5860 * For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS 5861 * attribute with QCA_WLAN_VENDOR_ATTR_HE_80_MCS0_7. And to configure HE MCS 5862 * for HE_160_MCS0_11 send this command using HE MCS config attribute with 5863 * value QCA_WLAN_VENDOR_ATTR_HE_160_MCS0_11; 5864 * 5865 * @HE_80_MCS0_7: support for HE 80/40/20MHz MCS 0 to 7 5866 * @HE_80_MCS0_9: support for HE 80/40/20MHz MCS 0 to 9 5867 * @HE_80_MCS0_11: support for HE 80/40/20MHz MCS 0 to 11 5868 * @HE_160_MCS0_7: support for HE 160MHz MCS 0 to 7 5869 * @HE_160_MCS0_9: support for HE 160MHz MCS 0 to 9 5870 * @HE_160_MCS0_11: support for HE 160MHz MCS 0 to 11 5871 * @HE_80p80_MCS0_7: support for HE 80p80MHz MCS 0 to 7 5872 * @HE_80p80_MCS0_9: support for HE 80p80MHz MCS 0 to 9 5873 * @HE_80p80_MCS0_11: support for HE 80p80MHz MCS 0 to 11 5874 */ 5875 enum he_mcs_config { 5876 HE_80_MCS0_7 = 0, 5877 HE_80_MCS0_9 = 1, 5878 HE_80_MCS0_11 = 2, 5879 HE_160_MCS0_7 = 4, 5880 HE_160_MCS0_9 = 5, 5881 HE_160_MCS0_11 = 6, 5882 HE_80p80_MCS0_7 = 8, 5883 HE_80p80_MCS0_9 = 9, 5884 HE_80p80_MCS0_11 = 10, 5885 }; 5886 5887 /** 5888 * enum qca_wlan_ba_session_config - BA session configuration 5889 * 5890 * Indicates the configuration values for BA session configuration attribute. 5891 * 5892 * @QCA_WLAN_ADD_BA: Establish a new BA session with given configuration. 5893 * @QCA_WLAN_DELETE_BA: Delete the existing BA session for given TID. 5894 */ 5895 enum qca_wlan_ba_session_config { 5896 QCA_WLAN_ADD_BA = 1, 5897 QCA_WLAN_DELETE_BA = 2, 5898 }; 5899 5900 /** 5901 * enum qca_wlan_ac_type - access category type 5902 * 5903 * Indicates the access category type value. 5904 * 5905 * @QCA_WLAN_AC_BE: BE access category 5906 * @QCA_WLAN_AC_BK: BK access category 5907 * @QCA_WLAN_AC_VI: VI access category 5908 * @QCA_WLAN_AC_VO: VO access category 5909 * @QCA_WLAN_AC_ALL: All ACs 5910 */ 5911 enum qca_wlan_ac_type { 5912 QCA_WLAN_AC_BE = 0, 5913 QCA_WLAN_AC_BK = 1, 5914 QCA_WLAN_AC_VI = 2, 5915 QCA_WLAN_AC_VO = 3, 5916 QCA_WLAN_AC_ALL = 4, 5917 }; 5918 5919 /** 5920 * enum qca_wlan_he_ltf_cfg - HE LTF configuration 5921 * 5922 * Indicates the HE LTF configuration value. 5923 * 5924 * @QCA_WLAN_HE_LTF_AUTO: HE-LTF is automatically set to 5925 * the mandatory HE-LTF based on the GI setting 5926 * @QCA_WLAN_HE_LTF_1X: 1X HE LTF is 3.2us LTF 5927 * @QCA_WLAN_HE_LTF_2X: 2X HE LTF is 6.4us LTF 5928 * @QCA_WLAN_HE_LTF_4X: 4X HE LTF is 12.8us LTF 5929 */ 5930 enum qca_wlan_he_ltf_cfg { 5931 QCA_WLAN_HE_LTF_AUTO = 0, 5932 QCA_WLAN_HE_LTF_1X = 1, 5933 QCA_WLAN_HE_LTF_2X = 2, 5934 QCA_WLAN_HE_LTF_4X = 3, 5935 }; 5936 5937 /** 5938 * enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration 5939 * 5940 * Indicates the HE trigger frame MAC padding duration value. 5941 * 5942 * @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to 5943 * process the trigger frame. 5944 * @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for 5945 * trigger frame. 5946 * @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for 5947 * trigger frame. 5948 */ 5949 enum qca_wlan_he_mac_padding_dur { 5950 QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0, 5951 QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1, 5952 QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2, 5953 }; 5954 5955 /* Attributes for data used by 5956 * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION 5957 */ 5958 enum qca_wlan_vendor_attr_wifi_test_config { 5959 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0, 5960 /* 8-bit unsigned value to configure the driver to enable/disable 5961 * WMM feature. This attribute is used to configure testbed device. 5962 * 1-enable, 0-disable 5963 */ 5964 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1, 5965 5966 /* 8-bit unsigned value to configure the driver to accept/reject 5967 * the addba request from peer. This attribute is used to configure 5968 * the testbed device. 5969 * 1-accept addba, 0-reject addba 5970 */ 5971 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2, 5972 5973 /* 8-bit unsigned value to configure the driver to send or not to 5974 * send the addba request to peer. 5975 * This attribute is used to configure the testbed device. 5976 * 1-send addba, 0-do not send addba 5977 */ 5978 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3, 5979 5980 /* 8-bit unsigned value to indicate the HE fragmentation support. 5981 * Uses enum he_fragmentation_val values. 5982 * This attribute is used to configure the testbed device to 5983 * allow the advertised hardware capabilities to be downgraded 5984 * for testing purposes. 5985 */ 5986 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4, 5987 5988 /* 8-bit unsigned value to indicate the HE MCS support. 5989 * Uses enum he_mcs_config values. 5990 * This attribute is used to configure the testbed device to 5991 * allow the advertised hardware capabilities to be downgraded 5992 * for testing purposes. 5993 */ 5994 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5, 5995 5996 /* 8-bit unsigned value to configure the driver to allow or not to 5997 * allow the connection with WEP/TKIP in HT/VHT/HE modes. 5998 * This attribute is used to configure the testbed device. 5999 * 1-allow wep/tkip in HT/VHT/HE, 0-do not allow wep/tkip 6000 */ 6001 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WEP_TKIP_IN_HE = 6, 6002 6003 /* 8-bit unsigned value to configure the driver to add a 6004 * new BA session or delete the existing BA session for 6005 * given TID. ADDBA command uses the buffer size and tid 6006 * configuration if user specifies the values else default 6007 * value for buffer size is used for all tids if the tid 6008 * also not specified. For DEL_BA command TID value is 6009 * required to process the command. 6010 * Uses enum qca_wlan_ba_session_config values. 6011 * This attribute is used to configure the testbed device. 6012 */ 6013 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7, 6014 6015 /* 8-bit unsigned value to configure the buffer size in addba 6016 * request and response frames. 6017 * This attribute is used to configure the testbed device. 6018 * The range of the value is 0 to 255 6019 */ 6020 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8, 6021 6022 /* 8-bit unsigned value to configure the buffer size in addba 6023 * request and response frames. 6024 * This attribute is used to configure the testbed device. 6025 */ 6026 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BA_TID = 9, 6027 6028 /* 8-bit unsigned value to configure the no ack policy. 6029 * To configure no ack policy, access category value 6030 * is required to process the command. 6031 * This attribute is used to configure the testbed device. 6032 * 1 - enable no ack, 0 - disable no ack 6033 */ 6034 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_NO_ACK = 10, 6035 6036 /* 8-bit unsigned value to configure the AC for no ack policy 6037 * This attribute is used to configure the testbed device. 6038 * uses the enum qca_wlan_ac_type values 6039 */ 6040 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_NO_ACK_AC = 11, 6041 6042 /* 8-bit unsigned value to configure the HE LTF 6043 * This attribute is used to configure the testbed device. 6044 * Uses the enum qca_wlan_he_ltf_cfg values. 6045 */ 6046 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_LTF = 12, 6047 6048 /* 8-bit unsigned value to configure the tx beamformee. 6049 * This attribute is used to configure the testbed device. 6050 * 1 - enable, 0 - disable. 6051 */ 6052 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13, 6053 6054 /* 8-bit unsigned value to configure the tx beamformee number of 6055 * space-time streams. 6056 * This attribute is used to configure the testbed device. 6057 * The range of the value is 0 to 8 6058 */ 6059 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14, 6060 6061 /* 8-bit unsigned value to configure the MU EDCA params for given AC 6062 * This attribute is used to configure the testbed device. 6063 * Uses the enum qca_wlan_ac_type values. 6064 */ 6065 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15, 6066 6067 /* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC 6068 * To configure MU EDCA AIFSN value, MU EDCA access category value 6069 * is required to process the command. 6070 * This attribute is used to configure the testbed device. 6071 */ 6072 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16, 6073 6074 /* 8-bit unsigned value to configure the MU EDCA ECW min value for 6075 * given AC. 6076 * To configure MU EDCA ECW min value, MU EDCA access category value 6077 * is required to process the command. 6078 * This attribute is used to configure the testbed device. 6079 */ 6080 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17, 6081 6082 /* 8-bit unsigned value to configure the MU EDCA ECW max value for 6083 * given AC. 6084 * To configure MU EDCA ECW max value, MU EDCA access category value 6085 * is required to process the command. 6086 * This attribute is used to configure the testbed device. 6087 */ 6088 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18, 6089 6090 /* 8-bit unsigned value to configure the MU EDCA timer for given AC 6091 * To configure MU EDCA timer value, MU EDCA access category value 6092 * is required to process the command. 6093 * This attribute is used to configure the testbed device. 6094 */ 6095 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19, 6096 6097 /* 8-bit unsigned value to configure the HE trigger frame MAC padding 6098 * duration. 6099 * This attribute is used to configure the testbed device. 6100 * Uses the enum qca_wlan_he_mac_padding_dur values. 6101 */ 6102 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20, 6103 6104 /* 8-bit unsigned value to override the MU EDCA params to defaults 6105 * regardless of the AP beacon MU EDCA params. If it is enabled use 6106 * the default values else use the MU EDCA params from AP beacon. 6107 * This attribute is used to configure the testbed device. 6108 * 1 - enable override, 0 - disable. 6109 */ 6110 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21, 6111 6112 /* keep last */ 6113 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST, 6114 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX = 6115 QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1, 6116 }; 6117 6118 #endif 6119