1  /* SPDX-License-Identifier: GPL-2.0 */
2  #ifndef __SAA7146_VV__
3  #define __SAA7146_VV__
4  
5  #include <media/v4l2-common.h>
6  #include <media/v4l2-ioctl.h>
7  #include <media/v4l2-fh.h>
8  #include <media/drv-intf/saa7146.h>
9  #include <media/videobuf2-dma-sg.h>
10  
11  #define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
12  #define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
13  
14  #define WRITE_RPS0(x) do { \
15  	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
16  	} while (0);
17  
18  #define WRITE_RPS1(x) do { \
19  	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
20  	} while (0);
21  
22  struct	saa7146_video_dma {
23  	u32 base_odd;
24  	u32 base_even;
25  	u32 prot_addr;
26  	u32 pitch;
27  	u32 base_page;
28  	u32 num_line_byte;
29  };
30  
31  #define FORMAT_BYTE_SWAP	0x1
32  #define FORMAT_IS_PLANAR	0x2
33  
34  struct saa7146_format {
35  	u32	pixelformat;
36  	u32	trans;
37  	u8	depth;
38  	u8	flags;
39  	u8	swap;
40  };
41  
42  struct saa7146_standard
43  {
44  	char          *name;
45  	v4l2_std_id   id;
46  
47  	int v_offset;	/* number of lines of vertical offset before processing */
48  	int v_field;	/* number of lines in a field for HPS to process */
49  
50  	int h_offset;	/* horizontal offset of processing window */
51  	int h_pixels;	/* number of horizontal pixels to process */
52  
53  	int v_max_out;
54  	int h_max_out;
55  };
56  
57  /* buffer for one video/vbi frame */
58  struct saa7146_buf {
59  	/* common v4l buffer stuff -- must be first */
60  	struct vb2_v4l2_buffer vb;
61  	struct list_head list;
62  
63  	/* saa7146 specific */
64  	int (*activate)(struct saa7146_dev *dev,
65  			struct saa7146_buf *buf,
66  			struct saa7146_buf *next);
67  
68  	/* page tables */
69  	struct saa7146_pgtable  pt[3];
70  };
71  
72  struct saa7146_dmaqueue {
73  	struct saa7146_dev	*dev;
74  	struct saa7146_buf	*curr;
75  	struct list_head	queue;
76  	struct timer_list	timeout;
77  	struct vb2_queue	q;
78  };
79  
80  struct saa7146_vv
81  {
82  	/* vbi capture */
83  	struct saa7146_dmaqueue		vbi_dmaq;
84  	struct v4l2_vbi_format		vbi_fmt;
85  	struct timer_list		vbi_read_timeout;
86  	/* vbi workaround interrupt queue */
87  	wait_queue_head_t		vbi_wq;
88  
89  	/* video capture */
90  	struct saa7146_dmaqueue		video_dmaq;
91  	struct v4l2_pix_format		video_fmt;
92  	enum v4l2_field			last_field;
93  	u32				seqnr;
94  
95  	/* common: fixme? shouldn't this be in saa7146_fh?
96  	   (this leads to a more complicated question: shall the driver
97  	   store the different settings (for example S_INPUT) for every open
98  	   and restore it appropriately, or should all settings be common for
99  	   all opens? currently, we do the latter, like all other
100  	   drivers do... */
101  	struct saa7146_standard	*standard;
102  
103  	int	vflip;
104  	int	hflip;
105  	int	current_hps_source;
106  	int	current_hps_sync;
107  
108  	unsigned int resources; /* resource management for device */
109  };
110  
111  /* flags */
112  #define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
113  
114  struct saa7146_ext_vv
115  {
116  	/* information about the video capabilities of the device */
117  	int	inputs;
118  	int	audios;
119  	u32	capabilities;
120  	int	flags;
121  
122  	/* additionally supported transmission standards */
123  	struct saa7146_standard *stds;
124  	int num_stds;
125  	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
126  
127  	/* the extension can override this */
128  	struct v4l2_ioctl_ops vid_ops;
129  	struct v4l2_ioctl_ops vbi_ops;
130  	/* pointer to the saa7146 core ops */
131  	const struct v4l2_ioctl_ops *core_ops;
132  
133  	struct v4l2_file_operations vbi_fops;
134  };
135  
136  struct saa7146_use_ops  {
137  	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
138  	void (*irq_done)(struct saa7146_dev *, unsigned long status);
139  };
140  
141  /* from saa7146_fops.c */
142  int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
143  int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
144  void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
145  void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
146  int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
147  void saa7146_buffer_timeout(struct timer_list *t);
148  
149  int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
150  int saa7146_vv_release(struct saa7146_dev* dev);
151  
152  /* from saa7146_hlp.c */
153  void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
154  void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
155  void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
156  void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
157  
158  /* from saa7146_video.c */
159  extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
160  extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
161  extern const struct saa7146_use_ops saa7146_video_uops;
162  extern const struct vb2_ops video_qops;
163  long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
164  int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
165  
166  /* from saa7146_vbi.c */
167  extern const struct saa7146_use_ops saa7146_vbi_uops;
168  extern const struct vb2_ops vbi_qops;
169  
170  /* resource management functions */
171  int saa7146_res_get(struct saa7146_dev *dev, unsigned int bit);
172  void saa7146_res_free(struct saa7146_dev *dev, unsigned int bits);
173  
174  #define RESOURCE_DMA1_HPS	0x1
175  #define RESOURCE_DMA2_CLP	0x2
176  #define RESOURCE_DMA3_BRS	0x4
177  
178  /* saa7146 source inputs */
179  #define SAA7146_HPS_SOURCE_PORT_A	0x00
180  #define SAA7146_HPS_SOURCE_PORT_B	0x01
181  #define SAA7146_HPS_SOURCE_YPB_CPA	0x02
182  #define SAA7146_HPS_SOURCE_YPA_CPB	0x03
183  
184  /* sync inputs */
185  #define SAA7146_HPS_SYNC_PORT_A		0x00
186  #define SAA7146_HPS_SYNC_PORT_B		0x01
187  
188  /* some memory sizes */
189  /* max. 16 clipping rectangles */
190  #define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
191  
192  /* some defines for the various clipping-modes */
193  #define SAA7146_CLIPPING_RECT		0x4
194  #define SAA7146_CLIPPING_RECT_INVERTED	0x5
195  #define SAA7146_CLIPPING_MASK		0x6
196  #define SAA7146_CLIPPING_MASK_INVERTED	0x7
197  
198  /* output formats: each entry holds four information */
199  #define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
200  /* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
201  #define RGB15_COMPOSED	0x0213
202  #define RGB16_COMPOSED	0x0210
203  #define RGB24_COMPOSED	0x0201
204  #define RGB32_COMPOSED	0x0202
205  
206  #define Y8			0x0006
207  #define YUV411_COMPOSED		0x0003
208  #define YUV422_COMPOSED		0x0000
209  /* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
210  #define YUV411_DECOMPOSED	0x100b
211  #define YUV422_DECOMPOSED	0x1009
212  #define YUV420_DECOMPOSED	0x100a
213  
214  #define IS_PLANAR(x) (x & 0xf000)
215  
216  /* misc defines */
217  #define SAA7146_NO_SWAP		(0x0)
218  #define SAA7146_TWO_BYTE_SWAP	(0x1)
219  #define SAA7146_FOUR_BYTE_SWAP	(0x2)
220  
221  #endif
222