1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Ftrace header.  For implementation details beyond the random comments
4  * scattered below, see: Documentation/trace/ftrace-design.rst
5  */
6 
7 #ifndef _LINUX_FTRACE_H
8 #define _LINUX_FTRACE_H
9 
10 #include <linux/trace_recursion.h>
11 #include <linux/trace_clock.h>
12 #include <linux/jump_label.h>
13 #include <linux/kallsyms.h>
14 #include <linux/linkage.h>
15 #include <linux/bitops.h>
16 #include <linux/ptrace.h>
17 #include <linux/ktime.h>
18 #include <linux/sched.h>
19 #include <linux/types.h>
20 #include <linux/init.h>
21 #include <linux/fs.h>
22 
23 #include <asm/ftrace.h>
24 
25 /*
26  * If the arch supports passing the variable contents of
27  * function_trace_op as the third parameter back from the
28  * mcount call, then the arch should define this as 1.
29  */
30 #ifndef ARCH_SUPPORTS_FTRACE_OPS
31 #define ARCH_SUPPORTS_FTRACE_OPS 0
32 #endif
33 
34 #ifdef CONFIG_TRACING
35 extern void ftrace_boot_snapshot(void);
36 #else
ftrace_boot_snapshot(void)37 static inline void ftrace_boot_snapshot(void) { }
38 #endif
39 
40 struct ftrace_ops;
41 struct ftrace_regs;
42 struct dyn_ftrace;
43 
44 char *arch_ftrace_match_adjust(char *str, const char *search);
45 
46 #ifdef CONFIG_HAVE_FUNCTION_GRAPH_RETVAL
47 struct fgraph_ret_regs;
48 unsigned long ftrace_return_to_handler(struct fgraph_ret_regs *ret_regs);
49 #else
50 unsigned long ftrace_return_to_handler(unsigned long frame_pointer);
51 #endif
52 
53 #ifdef CONFIG_FUNCTION_TRACER
54 /*
55  * If the arch's mcount caller does not support all of ftrace's
56  * features, then it must call an indirect function that
57  * does. Or at least does enough to prevent any unwelcome side effects.
58  *
59  * Also define the function prototype that these architectures use
60  * to call the ftrace_ops_list_func().
61  */
62 #if !ARCH_SUPPORTS_FTRACE_OPS
63 # define FTRACE_FORCE_LIST_FUNC 1
64 void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip);
65 #else
66 # define FTRACE_FORCE_LIST_FUNC 0
67 void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip,
68 			       struct ftrace_ops *op, struct ftrace_regs *fregs);
69 #endif
70 extern const struct ftrace_ops ftrace_nop_ops;
71 extern const struct ftrace_ops ftrace_list_ops;
72 struct ftrace_ops *ftrace_find_unique_ops(struct dyn_ftrace *rec);
73 #endif /* CONFIG_FUNCTION_TRACER */
74 
75 /* Main tracing buffer and events set up */
76 #ifdef CONFIG_TRACING
77 void trace_init(void);
78 void early_trace_init(void);
79 #else
trace_init(void)80 static inline void trace_init(void) { }
early_trace_init(void)81 static inline void early_trace_init(void) { }
82 #endif
83 
84 struct module;
85 struct ftrace_hash;
86 
87 #if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_MODULES) && \
88 	defined(CONFIG_DYNAMIC_FTRACE)
89 int
90 ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
91 		   unsigned long *off, char **modname, char *sym);
92 #else
93 static inline int
ftrace_mod_address_lookup(unsigned long addr,unsigned long * size,unsigned long * off,char ** modname,char * sym)94 ftrace_mod_address_lookup(unsigned long addr, unsigned long *size,
95 		   unsigned long *off, char **modname, char *sym)
96 {
97 	return 0;
98 }
99 #endif
100 
101 #if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_DYNAMIC_FTRACE)
102 int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
103 			   char *type, char *name,
104 			   char *module_name, int *exported);
105 #else
ftrace_mod_get_kallsym(unsigned int symnum,unsigned long * value,char * type,char * name,char * module_name,int * exported)106 static inline int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value,
107 					 char *type, char *name,
108 					 char *module_name, int *exported)
109 {
110 	return -1;
111 }
112 #endif
113 
114 #ifdef CONFIG_FUNCTION_TRACER
115 
116 extern int ftrace_enabled;
117 
118 #ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
119 
120 struct ftrace_regs {
121 	struct pt_regs		regs;
122 };
123 #define arch_ftrace_get_regs(fregs) (&(fregs)->regs)
124 
125 /*
126  * ftrace_regs_set_instruction_pointer() is to be defined by the architecture
127  * if to allow setting of the instruction pointer from the ftrace_regs when
128  * HAVE_DYNAMIC_FTRACE_WITH_ARGS is set and it supports live kernel patching.
129  */
130 #define ftrace_regs_set_instruction_pointer(fregs, ip) do { } while (0)
131 #endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */
132 
ftrace_get_regs(struct ftrace_regs * fregs)133 static __always_inline struct pt_regs *ftrace_get_regs(struct ftrace_regs *fregs)
134 {
135 	if (!fregs)
136 		return NULL;
137 
138 	return arch_ftrace_get_regs(fregs);
139 }
140 
141 /*
142  * When true, the ftrace_regs_{get,set}_*() functions may be used on fregs.
143  * Note: this can be true even when ftrace_get_regs() cannot provide a pt_regs.
144  */
ftrace_regs_has_args(struct ftrace_regs * fregs)145 static __always_inline bool ftrace_regs_has_args(struct ftrace_regs *fregs)
146 {
147 	if (IS_ENABLED(CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS))
148 		return true;
149 
150 	return ftrace_get_regs(fregs) != NULL;
151 }
152 
153 #ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
154 #define ftrace_regs_get_instruction_pointer(fregs) \
155 	instruction_pointer(ftrace_get_regs(fregs))
156 #define ftrace_regs_get_argument(fregs, n) \
157 	regs_get_kernel_argument(ftrace_get_regs(fregs), n)
158 #define ftrace_regs_get_stack_pointer(fregs) \
159 	kernel_stack_pointer(ftrace_get_regs(fregs))
160 #define ftrace_regs_return_value(fregs) \
161 	regs_return_value(ftrace_get_regs(fregs))
162 #define ftrace_regs_set_return_value(fregs, ret) \
163 	regs_set_return_value(ftrace_get_regs(fregs), ret)
164 #define ftrace_override_function_with_return(fregs) \
165 	override_function_with_return(ftrace_get_regs(fregs))
166 #define ftrace_regs_query_register_offset(name) \
167 	regs_query_register_offset(name)
168 #endif
169 
170 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
171 			      struct ftrace_ops *op, struct ftrace_regs *fregs);
172 
173 ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);
174 
175 /*
176  * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
177  * set in the flags member.
178  * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION, STUB and
179  * IPMODIFY are a kind of attribute flags which can be set only before
180  * registering the ftrace_ops, and can not be modified while registered.
181  * Changing those attribute flags after registering ftrace_ops will
182  * cause unexpected results.
183  *
184  * ENABLED - set/unset when ftrace_ops is registered/unregistered
185  * DYNAMIC - set when ftrace_ops is registered to denote dynamically
186  *           allocated ftrace_ops which need special care
187  * SAVE_REGS - The ftrace_ops wants regs saved at each function called
188  *            and passed to the callback. If this flag is set, but the
189  *            architecture does not support passing regs
190  *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
191  *            ftrace_ops will fail to register, unless the next flag
192  *            is set.
193  * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
194  *            handler can handle an arch that does not save regs
195  *            (the handler tests if regs == NULL), then it can set
196  *            this flag instead. It will not fail registering the ftrace_ops
197  *            but, the regs field will be NULL if the arch does not support
198  *            passing regs to the handler.
199  *            Note, if this flag is set, the SAVE_REGS flag will automatically
200  *            get set upon registering the ftrace_ops, if the arch supports it.
201  * RECURSION - The ftrace_ops can set this to tell the ftrace infrastructure
202  *            that the call back needs recursion protection. If it does
203  *            not set this, then the ftrace infrastructure will assume
204  *            that the callback can handle recursion on its own.
205  * STUB   - The ftrace_ops is just a place holder.
206  * INITIALIZED - The ftrace_ops has already been initialized (first use time
207  *            register_ftrace_function() is called, it will initialized the ops)
208  * DELETED - The ops are being deleted, do not let them be registered again.
209  * ADDING  - The ops is in the process of being added.
210  * REMOVING - The ops is in the process of being removed.
211  * MODIFYING - The ops is in the process of changing its filter functions.
212  * ALLOC_TRAMP - A dynamic trampoline was allocated by the core code.
213  *            The arch specific code sets this flag when it allocated a
214  *            trampoline. This lets the arch know that it can update the
215  *            trampoline in case the callback function changes.
216  *            The ftrace_ops trampoline can be set by the ftrace users, and
217  *            in such cases the arch must not modify it. Only the arch ftrace
218  *            core code should set this flag.
219  * IPMODIFY - The ops can modify the IP register. This can only be set with
220  *            SAVE_REGS. If another ops with this flag set is already registered
221  *            for any of the functions that this ops will be registered for, then
222  *            this ops will fail to register or set_filter_ip.
223  * PID     - Is affected by set_ftrace_pid (allows filtering on those pids)
224  * RCU     - Set when the ops can only be called when RCU is watching.
225  * TRACE_ARRAY - The ops->private points to a trace_array descriptor.
226  * PERMANENT - Set when the ops is permanent and should not be affected by
227  *             ftrace_enabled.
228  * DIRECT - Used by the direct ftrace_ops helper for direct functions
229  *            (internal ftrace only, should not be used by others)
230  * SUBOP  - Is controlled by another op in field managed.
231  */
232 enum {
233 	FTRACE_OPS_FL_ENABLED			= BIT(0),
234 	FTRACE_OPS_FL_DYNAMIC			= BIT(1),
235 	FTRACE_OPS_FL_SAVE_REGS			= BIT(2),
236 	FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED	= BIT(3),
237 	FTRACE_OPS_FL_RECURSION			= BIT(4),
238 	FTRACE_OPS_FL_STUB			= BIT(5),
239 	FTRACE_OPS_FL_INITIALIZED		= BIT(6),
240 	FTRACE_OPS_FL_DELETED			= BIT(7),
241 	FTRACE_OPS_FL_ADDING			= BIT(8),
242 	FTRACE_OPS_FL_REMOVING			= BIT(9),
243 	FTRACE_OPS_FL_MODIFYING			= BIT(10),
244 	FTRACE_OPS_FL_ALLOC_TRAMP		= BIT(11),
245 	FTRACE_OPS_FL_IPMODIFY			= BIT(12),
246 	FTRACE_OPS_FL_PID			= BIT(13),
247 	FTRACE_OPS_FL_RCU			= BIT(14),
248 	FTRACE_OPS_FL_TRACE_ARRAY		= BIT(15),
249 	FTRACE_OPS_FL_PERMANENT                 = BIT(16),
250 	FTRACE_OPS_FL_DIRECT			= BIT(17),
251 	FTRACE_OPS_FL_SUBOP			= BIT(18),
252 };
253 
254 #ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
255 #define FTRACE_OPS_FL_SAVE_ARGS                        FTRACE_OPS_FL_SAVE_REGS
256 #else
257 #define FTRACE_OPS_FL_SAVE_ARGS                        0
258 #endif
259 
260 /*
261  * FTRACE_OPS_CMD_* commands allow the ftrace core logic to request changes
262  * to a ftrace_ops. Note, the requests may fail.
263  *
264  * ENABLE_SHARE_IPMODIFY_SELF - enable a DIRECT ops to work on the same
265  *                              function as an ops with IPMODIFY. Called
266  *                              when the DIRECT ops is being registered.
267  *                              This is called with both direct_mutex and
268  *                              ftrace_lock are locked.
269  *
270  * ENABLE_SHARE_IPMODIFY_PEER - enable a DIRECT ops to work on the same
271  *                              function as an ops with IPMODIFY. Called
272  *                              when the other ops (the one with IPMODIFY)
273  *                              is being registered.
274  *                              This is called with direct_mutex locked.
275  *
276  * DISABLE_SHARE_IPMODIFY_PEER - disable a DIRECT ops to work on the same
277  *                               function as an ops with IPMODIFY. Called
278  *                               when the other ops (the one with IPMODIFY)
279  *                               is being unregistered.
280  *                               This is called with direct_mutex locked.
281  */
282 enum ftrace_ops_cmd {
283 	FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_SELF,
284 	FTRACE_OPS_CMD_ENABLE_SHARE_IPMODIFY_PEER,
285 	FTRACE_OPS_CMD_DISABLE_SHARE_IPMODIFY_PEER,
286 };
287 
288 /*
289  * For most ftrace_ops_cmd,
290  * Returns:
291  *        0 - Success.
292  *        Negative on failure. The return value is dependent on the
293  *        callback.
294  */
295 typedef int (*ftrace_ops_func_t)(struct ftrace_ops *op, enum ftrace_ops_cmd cmd);
296 
297 #ifdef CONFIG_DYNAMIC_FTRACE
298 /* The hash used to know what functions callbacks trace */
299 struct ftrace_ops_hash {
300 	struct ftrace_hash __rcu	*notrace_hash;
301 	struct ftrace_hash __rcu	*filter_hash;
302 	struct mutex			regex_lock;
303 };
304 
305 void ftrace_free_init_mem(void);
306 void ftrace_free_mem(struct module *mod, void *start, void *end);
307 #else
ftrace_free_init_mem(void)308 static inline void ftrace_free_init_mem(void)
309 {
310 	ftrace_boot_snapshot();
311 }
ftrace_free_mem(struct module * mod,void * start,void * end)312 static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
313 #endif
314 
315 /*
316  * Note, ftrace_ops can be referenced outside of RCU protection, unless
317  * the RCU flag is set. If ftrace_ops is allocated and not part of kernel
318  * core data, the unregistering of it will perform a scheduling on all CPUs
319  * to make sure that there are no more users. Depending on the load of the
320  * system that may take a bit of time.
321  *
322  * Any private data added must also take care not to be freed and if private
323  * data is added to a ftrace_ops that is in core code, the user of the
324  * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
325  */
326 struct ftrace_ops {
327 	ftrace_func_t			func;
328 	struct ftrace_ops __rcu		*next;
329 	unsigned long			flags;
330 	void				*private;
331 	ftrace_func_t			saved_func;
332 #ifdef CONFIG_DYNAMIC_FTRACE
333 	struct ftrace_ops_hash		local_hash;
334 	struct ftrace_ops_hash		*func_hash;
335 	struct ftrace_ops_hash		old_hash;
336 	unsigned long			trampoline;
337 	unsigned long			trampoline_size;
338 	struct list_head		list;
339 	struct list_head		subop_list;
340 	ftrace_ops_func_t		ops_func;
341 	struct ftrace_ops		*managed;
342 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
343 	unsigned long			direct_call;
344 #endif
345 #endif
346 };
347 
348 extern struct ftrace_ops __rcu *ftrace_ops_list;
349 extern struct ftrace_ops ftrace_list_end;
350 
351 /*
352  * Traverse the ftrace_ops_list, invoking all entries.  The reason that we
353  * can use rcu_dereference_raw_check() is that elements removed from this list
354  * are simply leaked, so there is no need to interact with a grace-period
355  * mechanism.  The rcu_dereference_raw_check() calls are needed to handle
356  * concurrent insertions into the ftrace_ops_list.
357  *
358  * Silly Alpha and silly pointer-speculation compiler optimizations!
359  */
360 #define do_for_each_ftrace_op(op, list)			\
361 	op = rcu_dereference_raw_check(list);			\
362 	do
363 
364 /*
365  * Optimized for just a single item in the list (as that is the normal case).
366  */
367 #define while_for_each_ftrace_op(op)				\
368 	while (likely(op = rcu_dereference_raw_check((op)->next)) &&	\
369 	       unlikely((op) != &ftrace_list_end))
370 
371 /*
372  * Type of the current tracing.
373  */
374 enum ftrace_tracing_type_t {
375 	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
376 	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
377 };
378 
379 /* Current tracing type, default is FTRACE_TYPE_ENTER */
380 extern enum ftrace_tracing_type_t ftrace_tracing_type;
381 
382 /*
383  * The ftrace_ops must be a static and should also
384  * be read_mostly.  These functions do modify read_mostly variables
385  * so use them sparely. Never free an ftrace_op or modify the
386  * next pointer after it has been registered. Even after unregistering
387  * it, the next pointer may still be used internally.
388  */
389 int register_ftrace_function(struct ftrace_ops *ops);
390 int unregister_ftrace_function(struct ftrace_ops *ops);
391 
392 extern void ftrace_stub(unsigned long a0, unsigned long a1,
393 			struct ftrace_ops *op, struct ftrace_regs *fregs);
394 
395 
396 int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt, unsigned long *addrs);
397 #else /* !CONFIG_FUNCTION_TRACER */
398 /*
399  * (un)register_ftrace_function must be a macro since the ops parameter
400  * must not be evaluated.
401  */
402 #define register_ftrace_function(ops) ({ 0; })
403 #define unregister_ftrace_function(ops) ({ 0; })
ftrace_kill(void)404 static inline void ftrace_kill(void) { }
ftrace_free_init_mem(void)405 static inline void ftrace_free_init_mem(void) { }
ftrace_free_mem(struct module * mod,void * start,void * end)406 static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { }
ftrace_lookup_symbols(const char ** sorted_syms,size_t cnt,unsigned long * addrs)407 static inline int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt, unsigned long *addrs)
408 {
409 	return -EOPNOTSUPP;
410 }
411 #endif /* CONFIG_FUNCTION_TRACER */
412 
413 struct ftrace_func_entry {
414 	struct hlist_node hlist;
415 	unsigned long ip;
416 	unsigned long direct; /* for direct lookup only */
417 };
418 
419 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
420 unsigned long ftrace_find_rec_direct(unsigned long ip);
421 int register_ftrace_direct(struct ftrace_ops *ops, unsigned long addr);
422 int unregister_ftrace_direct(struct ftrace_ops *ops, unsigned long addr,
423 			     bool free_filters);
424 int modify_ftrace_direct(struct ftrace_ops *ops, unsigned long addr);
425 int modify_ftrace_direct_nolock(struct ftrace_ops *ops, unsigned long addr);
426 
427 void ftrace_stub_direct_tramp(void);
428 
429 #else
430 struct ftrace_ops;
ftrace_find_rec_direct(unsigned long ip)431 static inline unsigned long ftrace_find_rec_direct(unsigned long ip)
432 {
433 	return 0;
434 }
register_ftrace_direct(struct ftrace_ops * ops,unsigned long addr)435 static inline int register_ftrace_direct(struct ftrace_ops *ops, unsigned long addr)
436 {
437 	return -ENODEV;
438 }
unregister_ftrace_direct(struct ftrace_ops * ops,unsigned long addr,bool free_filters)439 static inline int unregister_ftrace_direct(struct ftrace_ops *ops, unsigned long addr,
440 					   bool free_filters)
441 {
442 	return -ENODEV;
443 }
modify_ftrace_direct(struct ftrace_ops * ops,unsigned long addr)444 static inline int modify_ftrace_direct(struct ftrace_ops *ops, unsigned long addr)
445 {
446 	return -ENODEV;
447 }
modify_ftrace_direct_nolock(struct ftrace_ops * ops,unsigned long addr)448 static inline int modify_ftrace_direct_nolock(struct ftrace_ops *ops, unsigned long addr)
449 {
450 	return -ENODEV;
451 }
452 
453 /*
454  * This must be implemented by the architecture.
455  * It is the way the ftrace direct_ops helper, when called
456  * via ftrace (because there's other callbacks besides the
457  * direct call), can inform the architecture's trampoline that this
458  * routine has a direct caller, and what the caller is.
459  *
460  * For example, in x86, it returns the direct caller
461  * callback function via the regs->orig_ax parameter.
462  * Then in the ftrace trampoline, if this is set, it makes
463  * the return from the trampoline jump to the direct caller
464  * instead of going back to the function it just traced.
465  */
arch_ftrace_set_direct_caller(struct ftrace_regs * fregs,unsigned long addr)466 static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs,
467 						 unsigned long addr) { }
468 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
469 
470 #ifdef CONFIG_STACK_TRACER
471 
472 extern int stack_tracer_enabled;
473 
474 int stack_trace_sysctl(const struct ctl_table *table, int write, void *buffer,
475 		       size_t *lenp, loff_t *ppos);
476 
477 /* DO NOT MODIFY THIS VARIABLE DIRECTLY! */
478 DECLARE_PER_CPU(int, disable_stack_tracer);
479 
480 /**
481  * stack_tracer_disable - temporarily disable the stack tracer
482  *
483  * There's a few locations (namely in RCU) where stack tracing
484  * cannot be executed. This function is used to disable stack
485  * tracing during those critical sections.
486  *
487  * This function must be called with preemption or interrupts
488  * disabled and stack_tracer_enable() must be called shortly after
489  * while preemption or interrupts are still disabled.
490  */
stack_tracer_disable(void)491 static inline void stack_tracer_disable(void)
492 {
493 	/* Preemption or interrupts must be disabled */
494 	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
495 		WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
496 	this_cpu_inc(disable_stack_tracer);
497 }
498 
499 /**
500  * stack_tracer_enable - re-enable the stack tracer
501  *
502  * After stack_tracer_disable() is called, stack_tracer_enable()
503  * must be called shortly afterward.
504  */
stack_tracer_enable(void)505 static inline void stack_tracer_enable(void)
506 {
507 	if (IS_ENABLED(CONFIG_DEBUG_PREEMPT))
508 		WARN_ON_ONCE(!preempt_count() || !irqs_disabled());
509 	this_cpu_dec(disable_stack_tracer);
510 }
511 #else
stack_tracer_disable(void)512 static inline void stack_tracer_disable(void) { }
stack_tracer_enable(void)513 static inline void stack_tracer_enable(void) { }
514 #endif
515 
516 enum {
517 	FTRACE_UPDATE_CALLS		= (1 << 0),
518 	FTRACE_DISABLE_CALLS		= (1 << 1),
519 	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
520 	FTRACE_START_FUNC_RET		= (1 << 3),
521 	FTRACE_STOP_FUNC_RET		= (1 << 4),
522 	FTRACE_MAY_SLEEP		= (1 << 5),
523 };
524 
525 #ifdef CONFIG_DYNAMIC_FTRACE
526 
527 void ftrace_arch_code_modify_prepare(void);
528 void ftrace_arch_code_modify_post_process(void);
529 
530 enum ftrace_bug_type {
531 	FTRACE_BUG_UNKNOWN,
532 	FTRACE_BUG_INIT,
533 	FTRACE_BUG_NOP,
534 	FTRACE_BUG_CALL,
535 	FTRACE_BUG_UPDATE,
536 };
537 extern enum ftrace_bug_type ftrace_bug_type;
538 
539 /*
540  * Archs can set this to point to a variable that holds the value that was
541  * expected at the call site before calling ftrace_bug().
542  */
543 extern const void *ftrace_expected;
544 
545 void ftrace_bug(int err, struct dyn_ftrace *rec);
546 
547 struct seq_file;
548 
549 extern int ftrace_text_reserved(const void *start, const void *end);
550 
551 struct ftrace_ops *ftrace_ops_trampoline(unsigned long addr);
552 
553 bool is_ftrace_trampoline(unsigned long addr);
554 
555 /*
556  * The dyn_ftrace record's flags field is split into two parts.
557  * the first part which is '0-FTRACE_REF_MAX' is a counter of
558  * the number of callbacks that have registered the function that
559  * the dyn_ftrace descriptor represents.
560  *
561  * The second part is a mask:
562  *  ENABLED - the function is being traced
563  *  REGS    - the record wants the function to save regs
564  *  REGS_EN - the function is set up to save regs.
565  *  IPMODIFY - the record allows for the IP address to be changed.
566  *  DISABLED - the record is not ready to be touched yet
567  *  DIRECT   - there is a direct function to call
568  *  CALL_OPS - the record can use callsite-specific ops
569  *  CALL_OPS_EN - the function is set up to use callsite-specific ops
570  *  TOUCHED  - A callback was added since boot up
571  *  MODIFIED - The function had IPMODIFY or DIRECT attached to it
572  *
573  * When a new ftrace_ops is registered and wants a function to save
574  * pt_regs, the rec->flags REGS is set. When the function has been
575  * set up to save regs, the REG_EN flag is set. Once a function
576  * starts saving regs it will do so until all ftrace_ops are removed
577  * from tracing that function.
578  */
579 enum {
580 	FTRACE_FL_ENABLED	= (1UL << 31),
581 	FTRACE_FL_REGS		= (1UL << 30),
582 	FTRACE_FL_REGS_EN	= (1UL << 29),
583 	FTRACE_FL_TRAMP		= (1UL << 28),
584 	FTRACE_FL_TRAMP_EN	= (1UL << 27),
585 	FTRACE_FL_IPMODIFY	= (1UL << 26),
586 	FTRACE_FL_DISABLED	= (1UL << 25),
587 	FTRACE_FL_DIRECT	= (1UL << 24),
588 	FTRACE_FL_DIRECT_EN	= (1UL << 23),
589 	FTRACE_FL_CALL_OPS	= (1UL << 22),
590 	FTRACE_FL_CALL_OPS_EN	= (1UL << 21),
591 	FTRACE_FL_TOUCHED	= (1UL << 20),
592 	FTRACE_FL_MODIFIED	= (1UL << 19),
593 };
594 
595 #define FTRACE_REF_MAX_SHIFT	19
596 #define FTRACE_REF_MAX		((1UL << FTRACE_REF_MAX_SHIFT) - 1)
597 
598 #define ftrace_rec_count(rec)	((rec)->flags & FTRACE_REF_MAX)
599 
600 struct dyn_ftrace {
601 	unsigned long		ip; /* address of mcount call-site */
602 	unsigned long		flags;
603 	struct dyn_arch_ftrace	arch;
604 };
605 
606 int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
607 			 int remove, int reset);
608 int ftrace_set_filter_ips(struct ftrace_ops *ops, unsigned long *ips,
609 			  unsigned int cnt, int remove, int reset);
610 int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
611 		       int len, int reset);
612 int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
613 			int len, int reset);
614 void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
615 void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
616 void ftrace_free_filter(struct ftrace_ops *ops);
617 void ftrace_ops_set_global_filter(struct ftrace_ops *ops);
618 
619 /*
620  * The FTRACE_UPDATE_* enum is used to pass information back
621  * from the ftrace_update_record() and ftrace_test_record()
622  * functions. These are called by the code update routines
623  * to find out what is to be done for a given function.
624  *
625  *  IGNORE           - The function is already what we want it to be
626  *  MAKE_CALL        - Start tracing the function
627  *  MODIFY_CALL      - Stop saving regs for the function
628  *  MAKE_NOP         - Stop tracing the function
629  */
630 enum {
631 	FTRACE_UPDATE_IGNORE,
632 	FTRACE_UPDATE_MAKE_CALL,
633 	FTRACE_UPDATE_MODIFY_CALL,
634 	FTRACE_UPDATE_MAKE_NOP,
635 };
636 
637 enum {
638 	FTRACE_ITER_FILTER	= (1 << 0),
639 	FTRACE_ITER_NOTRACE	= (1 << 1),
640 	FTRACE_ITER_PRINTALL	= (1 << 2),
641 	FTRACE_ITER_DO_PROBES	= (1 << 3),
642 	FTRACE_ITER_PROBE	= (1 << 4),
643 	FTRACE_ITER_MOD		= (1 << 5),
644 	FTRACE_ITER_ENABLED	= (1 << 6),
645 	FTRACE_ITER_TOUCHED	= (1 << 7),
646 	FTRACE_ITER_ADDRS	= (1 << 8),
647 };
648 
649 void arch_ftrace_update_code(int command);
650 void arch_ftrace_update_trampoline(struct ftrace_ops *ops);
651 void *arch_ftrace_trampoline_func(struct ftrace_ops *ops, struct dyn_ftrace *rec);
652 void arch_ftrace_trampoline_free(struct ftrace_ops *ops);
653 
654 struct ftrace_rec_iter;
655 
656 struct ftrace_rec_iter *ftrace_rec_iter_start(void);
657 struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
658 struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
659 
660 #define for_ftrace_rec_iter(iter)		\
661 	for (iter = ftrace_rec_iter_start();	\
662 	     iter;				\
663 	     iter = ftrace_rec_iter_next(iter))
664 
665 
666 int ftrace_update_record(struct dyn_ftrace *rec, bool enable);
667 int ftrace_test_record(struct dyn_ftrace *rec, bool enable);
668 void ftrace_run_stop_machine(int command);
669 unsigned long ftrace_location(unsigned long ip);
670 unsigned long ftrace_location_range(unsigned long start, unsigned long end);
671 unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
672 unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);
673 
674 extern ftrace_func_t ftrace_trace_function;
675 
676 int ftrace_regex_open(struct ftrace_ops *ops, int flag,
677 		  struct inode *inode, struct file *file);
678 ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
679 			    size_t cnt, loff_t *ppos);
680 ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
681 			     size_t cnt, loff_t *ppos);
682 int ftrace_regex_release(struct inode *inode, struct file *file);
683 
684 void __init
685 ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
686 
687 /* defined in arch */
688 extern int ftrace_dyn_arch_init(void);
689 extern void ftrace_replace_code(int enable);
690 extern int ftrace_update_ftrace_func(ftrace_func_t func);
691 extern void ftrace_caller(void);
692 extern void ftrace_regs_caller(void);
693 extern void ftrace_call(void);
694 extern void ftrace_regs_call(void);
695 extern void mcount_call(void);
696 
697 void ftrace_modify_all_code(int command);
698 
699 #ifndef FTRACE_ADDR
700 #define FTRACE_ADDR ((unsigned long)ftrace_caller)
701 #endif
702 
703 #ifndef FTRACE_GRAPH_ADDR
704 #define FTRACE_GRAPH_ADDR ((unsigned long)ftrace_graph_caller)
705 #endif
706 
707 #ifndef FTRACE_REGS_ADDR
708 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
709 # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
710 #else
711 # define FTRACE_REGS_ADDR FTRACE_ADDR
712 #endif
713 #endif
714 
715 /*
716  * If an arch would like functions that are only traced
717  * by the function graph tracer to jump directly to its own
718  * trampoline, then they can define FTRACE_GRAPH_TRAMP_ADDR
719  * to be that address to jump to.
720  */
721 #ifndef FTRACE_GRAPH_TRAMP_ADDR
722 #define FTRACE_GRAPH_TRAMP_ADDR ((unsigned long) 0)
723 #endif
724 
725 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
726 extern void ftrace_graph_caller(void);
727 extern int ftrace_enable_ftrace_graph_caller(void);
728 extern int ftrace_disable_ftrace_graph_caller(void);
729 #else
ftrace_enable_ftrace_graph_caller(void)730 static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
ftrace_disable_ftrace_graph_caller(void)731 static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
732 #endif
733 
734 /**
735  * ftrace_make_nop - convert code into nop
736  * @mod: module structure if called by module load initialization
737  * @rec: the call site record (e.g. mcount/fentry)
738  * @addr: the address that the call site should be calling
739  *
740  * This is a very sensitive operation and great care needs
741  * to be taken by the arch.  The operation should carefully
742  * read the location, check to see if what is read is indeed
743  * what we expect it to be, and then on success of the compare,
744  * it should write to the location.
745  *
746  * The code segment at @rec->ip should be a caller to @addr
747  *
748  * Return must be:
749  *  0 on success
750  *  -EFAULT on error reading the location
751  *  -EINVAL on a failed compare of the contents
752  *  -EPERM  on error writing to the location
753  * Any other value will be considered a failure.
754  */
755 extern int ftrace_make_nop(struct module *mod,
756 			   struct dyn_ftrace *rec, unsigned long addr);
757 
758 /**
759  * ftrace_need_init_nop - return whether nop call sites should be initialized
760  *
761  * Normally the compiler's -mnop-mcount generates suitable nops, so we don't
762  * need to call ftrace_init_nop() if the code is built with that flag.
763  * Architectures where this is not always the case may define their own
764  * condition.
765  *
766  * Return must be:
767  *  0	    if ftrace_init_nop() should be called
768  *  Nonzero if ftrace_init_nop() should not be called
769  */
770 
771 #ifndef ftrace_need_init_nop
772 #define ftrace_need_init_nop() (!__is_defined(CC_USING_NOP_MCOUNT))
773 #endif
774 
775 /**
776  * ftrace_init_nop - initialize a nop call site
777  * @mod: module structure if called by module load initialization
778  * @rec: the call site record (e.g. mcount/fentry)
779  *
780  * This is a very sensitive operation and great care needs
781  * to be taken by the arch.  The operation should carefully
782  * read the location, check to see if what is read is indeed
783  * what we expect it to be, and then on success of the compare,
784  * it should write to the location.
785  *
786  * The code segment at @rec->ip should contain the contents created by
787  * the compiler
788  *
789  * Return must be:
790  *  0 on success
791  *  -EFAULT on error reading the location
792  *  -EINVAL on a failed compare of the contents
793  *  -EPERM  on error writing to the location
794  * Any other value will be considered a failure.
795  */
796 #ifndef ftrace_init_nop
ftrace_init_nop(struct module * mod,struct dyn_ftrace * rec)797 static inline int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
798 {
799 	return ftrace_make_nop(mod, rec, MCOUNT_ADDR);
800 }
801 #endif
802 
803 /**
804  * ftrace_make_call - convert a nop call site into a call to addr
805  * @rec: the call site record (e.g. mcount/fentry)
806  * @addr: the address that the call site should call
807  *
808  * This is a very sensitive operation and great care needs
809  * to be taken by the arch.  The operation should carefully
810  * read the location, check to see if what is read is indeed
811  * what we expect it to be, and then on success of the compare,
812  * it should write to the location.
813  *
814  * The code segment at @rec->ip should be a nop
815  *
816  * Return must be:
817  *  0 on success
818  *  -EFAULT on error reading the location
819  *  -EINVAL on a failed compare of the contents
820  *  -EPERM  on error writing to the location
821  * Any other value will be considered a failure.
822  */
823 extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
824 
825 #if defined(CONFIG_DYNAMIC_FTRACE_WITH_REGS) || \
826 	defined(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS) || \
827 	defined(CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS)
828 /**
829  * ftrace_modify_call - convert from one addr to another (no nop)
830  * @rec: the call site record (e.g. mcount/fentry)
831  * @old_addr: the address expected to be currently called to
832  * @addr: the address to change to
833  *
834  * This is a very sensitive operation and great care needs
835  * to be taken by the arch.  The operation should carefully
836  * read the location, check to see if what is read is indeed
837  * what we expect it to be, and then on success of the compare,
838  * it should write to the location.
839  *
840  * When using call ops, this is called when the associated ops change, even
841  * when (addr == old_addr).
842  *
843  * The code segment at @rec->ip should be a caller to @old_addr
844  *
845  * Return must be:
846  *  0 on success
847  *  -EFAULT on error reading the location
848  *  -EINVAL on a failed compare of the contents
849  *  -EPERM  on error writing to the location
850  * Any other value will be considered a failure.
851  */
852 extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
853 			      unsigned long addr);
854 #else
855 /* Should never be called */
ftrace_modify_call(struct dyn_ftrace * rec,unsigned long old_addr,unsigned long addr)856 static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
857 				     unsigned long addr)
858 {
859 	return -EINVAL;
860 }
861 #endif
862 
863 extern int skip_trace(unsigned long ip);
864 extern void ftrace_module_init(struct module *mod);
865 extern void ftrace_module_enable(struct module *mod);
866 extern void ftrace_release_mod(struct module *mod);
867 #else /* CONFIG_DYNAMIC_FTRACE */
skip_trace(unsigned long ip)868 static inline int skip_trace(unsigned long ip) { return 0; }
ftrace_module_init(struct module * mod)869 static inline void ftrace_module_init(struct module *mod) { }
ftrace_module_enable(struct module * mod)870 static inline void ftrace_module_enable(struct module *mod) { }
ftrace_release_mod(struct module * mod)871 static inline void ftrace_release_mod(struct module *mod) { }
ftrace_text_reserved(const void * start,const void * end)872 static inline int ftrace_text_reserved(const void *start, const void *end)
873 {
874 	return 0;
875 }
ftrace_location(unsigned long ip)876 static inline unsigned long ftrace_location(unsigned long ip)
877 {
878 	return 0;
879 }
880 
881 /*
882  * Again users of functions that have ftrace_ops may not
883  * have them defined when ftrace is not enabled, but these
884  * functions may still be called. Use a macro instead of inline.
885  */
886 #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
887 #define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
888 #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
889 #define ftrace_set_filter_ips(ops, ips, cnt, remove, reset) ({ -ENODEV; })
890 #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
891 #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
892 #define ftrace_free_filter(ops) do { } while (0)
893 #define ftrace_ops_set_global_filter(ops) do { } while (0)
894 
ftrace_filter_write(struct file * file,const char __user * ubuf,size_t cnt,loff_t * ppos)895 static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
896 			    size_t cnt, loff_t *ppos) { return -ENODEV; }
ftrace_notrace_write(struct file * file,const char __user * ubuf,size_t cnt,loff_t * ppos)897 static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
898 			     size_t cnt, loff_t *ppos) { return -ENODEV; }
899 static inline int
ftrace_regex_release(struct inode * inode,struct file * file)900 ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
901 
is_ftrace_trampoline(unsigned long addr)902 static inline bool is_ftrace_trampoline(unsigned long addr)
903 {
904 	return false;
905 }
906 #endif /* CONFIG_DYNAMIC_FTRACE */
907 
908 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
909 #ifndef ftrace_graph_func
910 #define ftrace_graph_func ftrace_stub
911 #define FTRACE_OPS_GRAPH_STUB FTRACE_OPS_FL_STUB
912 #else
913 #define FTRACE_OPS_GRAPH_STUB 0
914 #endif
915 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
916 
917 /* totally disable ftrace - can not re-enable after this */
918 void ftrace_kill(void);
919 
tracer_disable(void)920 static inline void tracer_disable(void)
921 {
922 #ifdef CONFIG_FUNCTION_TRACER
923 	ftrace_enabled = 0;
924 #endif
925 }
926 
927 /*
928  * Ftrace disable/restore without lock. Some synchronization mechanism
929  * must be used to prevent ftrace_enabled to be changed between
930  * disable/restore.
931  */
__ftrace_enabled_save(void)932 static inline int __ftrace_enabled_save(void)
933 {
934 #ifdef CONFIG_FUNCTION_TRACER
935 	int saved_ftrace_enabled = ftrace_enabled;
936 	ftrace_enabled = 0;
937 	return saved_ftrace_enabled;
938 #else
939 	return 0;
940 #endif
941 }
942 
__ftrace_enabled_restore(int enabled)943 static inline void __ftrace_enabled_restore(int enabled)
944 {
945 #ifdef CONFIG_FUNCTION_TRACER
946 	ftrace_enabled = enabled;
947 #endif
948 }
949 
950 /* All archs should have this, but we define it for consistency */
951 #ifndef ftrace_return_address0
952 # define ftrace_return_address0 __builtin_return_address(0)
953 #endif
954 
955 /* Archs may use other ways for ADDR1 and beyond */
956 #ifndef ftrace_return_address
957 # ifdef CONFIG_FRAME_POINTER
958 #  define ftrace_return_address(n) __builtin_return_address(n)
959 # else
960 #  define ftrace_return_address(n) 0UL
961 # endif
962 #endif
963 
964 #define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
965 #define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
966 #define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
967 #define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
968 #define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
969 #define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
970 #define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
971 
get_lock_parent_ip(void)972 static __always_inline unsigned long get_lock_parent_ip(void)
973 {
974 	unsigned long addr = CALLER_ADDR0;
975 
976 	if (!in_lock_functions(addr))
977 		return addr;
978 	addr = CALLER_ADDR1;
979 	if (!in_lock_functions(addr))
980 		return addr;
981 	return CALLER_ADDR2;
982 }
983 
984 #ifdef CONFIG_TRACE_PREEMPT_TOGGLE
985   extern void trace_preempt_on(unsigned long a0, unsigned long a1);
986   extern void trace_preempt_off(unsigned long a0, unsigned long a1);
987 #else
988 /*
989  * Use defines instead of static inlines because some arches will make code out
990  * of the CALLER_ADDR, when we really want these to be a real nop.
991  */
992 # define trace_preempt_on(a0, a1) do { } while (0)
993 # define trace_preempt_off(a0, a1) do { } while (0)
994 #endif
995 
996 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
997 extern void ftrace_init(void);
998 #ifdef CC_USING_PATCHABLE_FUNCTION_ENTRY
999 #define FTRACE_CALLSITE_SECTION	"__patchable_function_entries"
1000 #else
1001 #define FTRACE_CALLSITE_SECTION	"__mcount_loc"
1002 #endif
1003 #else
ftrace_init(void)1004 static inline void ftrace_init(void) { }
1005 #endif
1006 
1007 /*
1008  * Structure that defines an entry function trace.
1009  * It's already packed but the attribute "packed" is needed
1010  * to remove extra padding at the end.
1011  */
1012 struct ftrace_graph_ent {
1013 	unsigned long func; /* Current function */
1014 	int depth;
1015 } __packed;
1016 
1017 /*
1018  * Structure that defines a return function trace.
1019  * It's already packed but the attribute "packed" is needed
1020  * to remove extra padding at the end.
1021  */
1022 struct ftrace_graph_ret {
1023 	unsigned long func; /* Current function */
1024 #ifdef CONFIG_FUNCTION_GRAPH_RETVAL
1025 	unsigned long retval;
1026 #endif
1027 	int depth;
1028 	/* Number of functions that overran the depth limit for current task */
1029 	unsigned int overrun;
1030 	unsigned long long calltime;
1031 	unsigned long long rettime;
1032 } __packed;
1033 
1034 struct fgraph_ops;
1035 
1036 /* Type of the callback handlers for tracing function graph*/
1037 typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *,
1038 				       struct fgraph_ops *); /* return */
1039 typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *,
1040 				      struct fgraph_ops *); /* entry */
1041 
1042 extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace, struct fgraph_ops *gops);
1043 bool ftrace_pids_enabled(struct ftrace_ops *ops);
1044 
1045 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
1046 
1047 struct fgraph_ops {
1048 	trace_func_graph_ent_t		entryfunc;
1049 	trace_func_graph_ret_t		retfunc;
1050 	struct ftrace_ops		ops; /* for the hash lists */
1051 	void				*private;
1052 	trace_func_graph_ent_t		saved_func;
1053 	int				idx;
1054 };
1055 
1056 void *fgraph_reserve_data(int idx, int size_bytes);
1057 void *fgraph_retrieve_data(int idx, int *size_bytes);
1058 
1059 /*
1060  * Stack of return addresses for functions
1061  * of a thread.
1062  * Used in struct thread_info
1063  */
1064 struct ftrace_ret_stack {
1065 	unsigned long ret;
1066 	unsigned long func;
1067 	unsigned long long calltime;
1068 #ifdef CONFIG_FUNCTION_PROFILER
1069 	unsigned long long subtime;
1070 #endif
1071 #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
1072 	unsigned long fp;
1073 #endif
1074 	unsigned long *retp;
1075 };
1076 
1077 /*
1078  * Primary handler of a function return.
1079  * It relays on ftrace_return_to_handler.
1080  * Defined in entry_32/64.S
1081  */
1082 extern void return_to_handler(void);
1083 
1084 extern int
1085 function_graph_enter(unsigned long ret, unsigned long func,
1086 		     unsigned long frame_pointer, unsigned long *retp);
1087 
1088 struct ftrace_ret_stack *
1089 ftrace_graph_get_ret_stack(struct task_struct *task, int skip);
1090 
1091 unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
1092 				    unsigned long ret, unsigned long *retp);
1093 unsigned long *fgraph_get_task_var(struct fgraph_ops *gops);
1094 
1095 /*
1096  * Sometimes we don't want to trace a function with the function
1097  * graph tracer but we want them to keep traced by the usual function
1098  * tracer if the function graph tracer is not configured.
1099  */
1100 #define __notrace_funcgraph		notrace
1101 
1102 #define FTRACE_RETFUNC_DEPTH 50
1103 #define FTRACE_RETSTACK_ALLOC_SIZE 32
1104 
1105 extern int register_ftrace_graph(struct fgraph_ops *ops);
1106 extern void unregister_ftrace_graph(struct fgraph_ops *ops);
1107 
1108 /**
1109  * ftrace_graph_is_dead - returns true if ftrace_graph_stop() was called
1110  *
1111  * ftrace_graph_stop() is called when a severe error is detected in
1112  * the function graph tracing. This function is called by the critical
1113  * paths of function graph to keep those paths from doing any more harm.
1114  */
1115 DECLARE_STATIC_KEY_FALSE(kill_ftrace_graph);
1116 
ftrace_graph_is_dead(void)1117 static inline bool ftrace_graph_is_dead(void)
1118 {
1119 	return static_branch_unlikely(&kill_ftrace_graph);
1120 }
1121 
1122 extern void ftrace_graph_stop(void);
1123 
1124 /* The current handlers in use */
1125 extern trace_func_graph_ret_t ftrace_graph_return;
1126 extern trace_func_graph_ent_t ftrace_graph_entry;
1127 
1128 extern void ftrace_graph_init_task(struct task_struct *t);
1129 extern void ftrace_graph_exit_task(struct task_struct *t);
1130 extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
1131 
1132 /* Used by assembly, but to quiet sparse warnings */
1133 extern struct ftrace_ops *function_trace_op;
1134 
pause_graph_tracing(void)1135 static inline void pause_graph_tracing(void)
1136 {
1137 	atomic_inc(&current->tracing_graph_pause);
1138 }
1139 
unpause_graph_tracing(void)1140 static inline void unpause_graph_tracing(void)
1141 {
1142 	atomic_dec(&current->tracing_graph_pause);
1143 }
1144 #else /* !CONFIG_FUNCTION_GRAPH_TRACER */
1145 
1146 #define __notrace_funcgraph
1147 
ftrace_graph_init_task(struct task_struct * t)1148 static inline void ftrace_graph_init_task(struct task_struct *t) { }
ftrace_graph_exit_task(struct task_struct * t)1149 static inline void ftrace_graph_exit_task(struct task_struct *t) { }
ftrace_graph_init_idle_task(struct task_struct * t,int cpu)1150 static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
1151 
1152 /* Define as macros as fgraph_ops may not be defined */
1153 #define register_ftrace_graph(ops) ({ -1; })
1154 #define unregister_ftrace_graph(ops) do { } while (0)
1155 
1156 static inline unsigned long
ftrace_graph_ret_addr(struct task_struct * task,int * idx,unsigned long ret,unsigned long * retp)1157 ftrace_graph_ret_addr(struct task_struct *task, int *idx, unsigned long ret,
1158 		      unsigned long *retp)
1159 {
1160 	return ret;
1161 }
1162 
pause_graph_tracing(void)1163 static inline void pause_graph_tracing(void) { }
unpause_graph_tracing(void)1164 static inline void unpause_graph_tracing(void) { }
1165 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
1166 
1167 #ifdef CONFIG_TRACING
1168 enum ftrace_dump_mode;
1169 
1170 #define MAX_TRACER_SIZE		100
1171 extern char ftrace_dump_on_oops[];
1172 extern int ftrace_dump_on_oops_enabled(void);
1173 extern int tracepoint_printk;
1174 
1175 extern void disable_trace_on_warning(void);
1176 extern int __disable_trace_on_warning;
1177 
1178 int tracepoint_printk_sysctl(const struct ctl_table *table, int write,
1179 			     void *buffer, size_t *lenp, loff_t *ppos);
1180 
1181 #else /* CONFIG_TRACING */
disable_trace_on_warning(void)1182 static inline void  disable_trace_on_warning(void) { }
1183 #endif /* CONFIG_TRACING */
1184 
1185 #ifdef CONFIG_FTRACE_SYSCALLS
1186 
1187 unsigned long arch_syscall_addr(int nr);
1188 
1189 #endif /* CONFIG_FTRACE_SYSCALLS */
1190 
1191 #endif /* _LINUX_FTRACE_H */
1192