1  /* SPDX-License-Identifier: GPL-2.0-only */
2  /*
3   * MIPI DSI Bus
4   *
5   * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
6   * Andrzej Hajda <a.hajda@samsung.com>
7   */
8  
9  #ifndef __DRM_MIPI_DSI_H__
10  #define __DRM_MIPI_DSI_H__
11  
12  #include <linux/device.h>
13  #include <linux/delay.h>
14  
15  struct mipi_dsi_host;
16  struct mipi_dsi_device;
17  struct drm_dsc_picture_parameter_set;
18  
19  /* request ACK from peripheral */
20  #define MIPI_DSI_MSG_REQ_ACK	BIT(0)
21  /* use Low Power Mode to transmit message */
22  #define MIPI_DSI_MSG_USE_LPM	BIT(1)
23  
24  /**
25   * struct mipi_dsi_msg - read/write DSI buffer
26   * @channel: virtual channel id
27   * @type: payload data type
28   * @flags: flags controlling this message transmission
29   * @tx_len: length of @tx_buf
30   * @tx_buf: data to be written
31   * @rx_len: length of @rx_buf
32   * @rx_buf: data to be read, or NULL
33   */
34  struct mipi_dsi_msg {
35  	u8 channel;
36  	u8 type;
37  	u16 flags;
38  
39  	size_t tx_len;
40  	const void *tx_buf;
41  
42  	size_t rx_len;
43  	void *rx_buf;
44  };
45  
46  bool mipi_dsi_packet_format_is_short(u8 type);
47  bool mipi_dsi_packet_format_is_long(u8 type);
48  
49  /**
50   * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
51   * @size: size (in bytes) of the packet
52   * @header: the four bytes that make up the header (Data ID, Word Count or
53   *     Packet Data, and ECC)
54   * @payload_length: number of bytes in the payload
55   * @payload: a pointer to a buffer containing the payload, if any
56   */
57  struct mipi_dsi_packet {
58  	size_t size;
59  	u8 header[4];
60  	size_t payload_length;
61  	const u8 *payload;
62  };
63  
64  int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
65  			   const struct mipi_dsi_msg *msg);
66  
67  /**
68   * struct mipi_dsi_host_ops - DSI bus operations
69   * @attach: attach DSI device to DSI host
70   * @detach: detach DSI device from DSI host
71   * @transfer: transmit a DSI packet
72   *
73   * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
74   * structures. This structure contains information about the type of packet
75   * being transmitted as well as the transmit and receive buffers. When an
76   * error is encountered during transmission, this function will return a
77   * negative error code. On success it shall return the number of bytes
78   * transmitted for write packets or the number of bytes received for read
79   * packets.
80   *
81   * Note that typically DSI packet transmission is atomic, so the .transfer()
82   * function will seldomly return anything other than the number of bytes
83   * contained in the transmit buffer on success.
84   *
85   * Also note that those callbacks can be called no matter the state the
86   * host is in. Drivers that need the underlying device to be powered to
87   * perform these operations will first need to make sure it's been
88   * properly enabled.
89   */
90  struct mipi_dsi_host_ops {
91  	int (*attach)(struct mipi_dsi_host *host,
92  		      struct mipi_dsi_device *dsi);
93  	int (*detach)(struct mipi_dsi_host *host,
94  		      struct mipi_dsi_device *dsi);
95  	ssize_t (*transfer)(struct mipi_dsi_host *host,
96  			    const struct mipi_dsi_msg *msg);
97  };
98  
99  /**
100   * struct mipi_dsi_host - DSI host device
101   * @dev: driver model device node for this DSI host
102   * @ops: DSI host operations
103   * @list: list management
104   */
105  struct mipi_dsi_host {
106  	struct device *dev;
107  	const struct mipi_dsi_host_ops *ops;
108  	struct list_head list;
109  };
110  
111  int mipi_dsi_host_register(struct mipi_dsi_host *host);
112  void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
113  struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
114  
115  /* DSI mode flags */
116  
117  /* video mode */
118  #define MIPI_DSI_MODE_VIDEO		BIT(0)
119  /* video burst mode */
120  #define MIPI_DSI_MODE_VIDEO_BURST	BIT(1)
121  /* video pulse mode */
122  #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE	BIT(2)
123  /* enable auto vertical count mode */
124  #define MIPI_DSI_MODE_VIDEO_AUTO_VERT	BIT(3)
125  /* enable hsync-end packets in vsync-pulse and v-porch area */
126  #define MIPI_DSI_MODE_VIDEO_HSE		BIT(4)
127  /* disable hfront-porch area */
128  #define MIPI_DSI_MODE_VIDEO_NO_HFP	BIT(5)
129  /* disable hback-porch area */
130  #define MIPI_DSI_MODE_VIDEO_NO_HBP	BIT(6)
131  /* disable hsync-active area */
132  #define MIPI_DSI_MODE_VIDEO_NO_HSA	BIT(7)
133  /* flush display FIFO on vsync pulse */
134  #define MIPI_DSI_MODE_VSYNC_FLUSH	BIT(8)
135  /* disable EoT packets in HS mode */
136  #define MIPI_DSI_MODE_NO_EOT_PACKET	BIT(9)
137  /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
138  #define MIPI_DSI_CLOCK_NON_CONTINUOUS	BIT(10)
139  /* transmit data in low power */
140  #define MIPI_DSI_MODE_LPM		BIT(11)
141  /* transmit data ending at the same time for all lanes within one hsync */
142  #define MIPI_DSI_HS_PKT_END_ALIGNED	BIT(12)
143  
144  enum mipi_dsi_pixel_format {
145  	MIPI_DSI_FMT_RGB888,
146  	MIPI_DSI_FMT_RGB666,
147  	MIPI_DSI_FMT_RGB666_PACKED,
148  	MIPI_DSI_FMT_RGB565,
149  };
150  
151  #define DSI_DEV_NAME_SIZE		20
152  
153  /**
154   * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
155   * @type: DSI peripheral chip type
156   * @channel: DSI virtual channel assigned to peripheral
157   * @node: pointer to OF device node or NULL
158   *
159   * This is populated and passed to mipi_dsi_device_new to create a new
160   * DSI device
161   */
162  struct mipi_dsi_device_info {
163  	char type[DSI_DEV_NAME_SIZE];
164  	u32 channel;
165  	struct device_node *node;
166  };
167  
168  /**
169   * struct mipi_dsi_device - DSI peripheral device
170   * @host: DSI host for this peripheral
171   * @dev: driver model device node for this peripheral
172   * @attached: the DSI device has been successfully attached
173   * @name: DSI peripheral chip type
174   * @channel: virtual channel assigned to the peripheral
175   * @format: pixel format for video mode
176   * @lanes: number of active data lanes
177   * @mode_flags: DSI operation mode related flags
178   * @hs_rate: maximum lane frequency for high speed mode in hertz, this should
179   * be set to the real limits of the hardware, zero is only accepted for
180   * legacy drivers
181   * @lp_rate: maximum lane frequency for low power mode in hertz, this should
182   * be set to the real limits of the hardware, zero is only accepted for
183   * legacy drivers
184   * @dsc: panel/bridge DSC pps payload to be sent
185   */
186  struct mipi_dsi_device {
187  	struct mipi_dsi_host *host;
188  	struct device dev;
189  	bool attached;
190  
191  	char name[DSI_DEV_NAME_SIZE];
192  	unsigned int channel;
193  	unsigned int lanes;
194  	enum mipi_dsi_pixel_format format;
195  	unsigned long mode_flags;
196  	unsigned long hs_rate;
197  	unsigned long lp_rate;
198  	struct drm_dsc_config *dsc;
199  };
200  
201  /**
202   * struct mipi_dsi_multi_context - Context to call multiple MIPI DSI funcs in a row
203   */
204  struct mipi_dsi_multi_context {
205  	/**
206  	 * @dsi: Pointer to the MIPI DSI device
207  	 */
208  	struct mipi_dsi_device *dsi;
209  
210  	/**
211  	 * @accum_err: Storage for the accumulated error over the multiple calls
212  	 *
213  	 * Init to 0. If a function encounters an error then the error code
214  	 * will be stored here. If you call a function and this points to a
215  	 * non-zero value then the function will be a noop. This allows calling
216  	 * a function many times in a row and just checking the error at the
217  	 * end to see if any of them failed.
218  	 */
219  	int accum_err;
220  };
221  
222  #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
223  
224  #define to_mipi_dsi_device(__dev)	container_of_const(__dev, struct mipi_dsi_device, dev)
225  
226  /**
227   * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
228   *                                given pixel format defined by the MIPI DSI
229   *                                specification
230   * @fmt: MIPI DSI pixel format
231   *
232   * Returns: The number of bits per pixel of the given pixel format.
233   */
mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)234  static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
235  {
236  	switch (fmt) {
237  	case MIPI_DSI_FMT_RGB888:
238  	case MIPI_DSI_FMT_RGB666:
239  		return 24;
240  
241  	case MIPI_DSI_FMT_RGB666_PACKED:
242  		return 18;
243  
244  	case MIPI_DSI_FMT_RGB565:
245  		return 16;
246  	}
247  
248  	return -EINVAL;
249  }
250  
251  enum mipi_dsi_compression_algo {
252  	MIPI_DSI_COMPRESSION_DSC = 0,
253  	MIPI_DSI_COMPRESSION_VENDOR = 3,
254  	/* other two values are reserved, DSI 1.3 */
255  };
256  
257  struct mipi_dsi_device *
258  mipi_dsi_device_register_full(struct mipi_dsi_host *host,
259  			      const struct mipi_dsi_device_info *info);
260  void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi);
261  struct mipi_dsi_device *
262  devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host,
263  				   const struct mipi_dsi_device_info *info);
264  struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
265  int mipi_dsi_attach(struct mipi_dsi_device *dsi);
266  int mipi_dsi_detach(struct mipi_dsi_device *dsi);
267  int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi);
268  int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
269  int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
270  int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
271  					    u16 value);
272  int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
273  int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
274  				  enum mipi_dsi_compression_algo algo,
275  				  unsigned int pps_selector);
276  int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
277  				   const struct drm_dsc_picture_parameter_set *pps);
278  
279  void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx,
280  					 bool enable,
281  					 enum mipi_dsi_compression_algo algo,
282  					 unsigned int pps_selector);
283  void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx,
284  					  const struct drm_dsc_picture_parameter_set *pps);
285  
286  ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
287  			       size_t size);
288  int mipi_dsi_generic_write_chatty(struct mipi_dsi_device *dsi,
289  				  const void *payload, size_t size);
290  void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx,
291  				  const void *payload, size_t size);
292  ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
293  			      size_t num_params, void *data, size_t size);
294  
295  #define mipi_dsi_msleep(ctx, delay)	\
296  	do {				\
297  		if (!(ctx)->accum_err)	\
298  			msleep(delay);	\
299  	} while (0)
300  
301  #define mipi_dsi_usleep_range(ctx, min, max)	\
302  	do {					\
303  		if (!(ctx)->accum_err)		\
304  			usleep_range(min, max);	\
305  	} while (0)
306  
307  /**
308   * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
309   * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
310   *    information only
311   * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
312   *    V-Blanking and H-Blanking information
313   */
314  enum mipi_dsi_dcs_tear_mode {
315  	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
316  	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
317  };
318  
319  #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
320  #define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
321  #define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
322  #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
323  #define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
324  
325  ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
326  				  const void *data, size_t len);
327  int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi,
328  				     const void *data, size_t len);
329  void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx,
330  				     const void *data, size_t len);
331  ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
332  			   const void *data, size_t len);
333  ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
334  			  size_t len);
335  int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
336  int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
337  int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
338  int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
339  int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
340  int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
341  int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
342  int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
343  int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
344  				    u16 end);
345  int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
346  				  u16 end);
347  int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
348  int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
349  			     enum mipi_dsi_dcs_tear_mode mode);
350  int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
351  int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
352  int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
353  					u16 brightness);
354  int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
355  					u16 *brightness);
356  int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
357  					     u16 brightness);
358  int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
359  					     u16 *brightness);
360  
361  void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx);
362  void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx);
363  void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx);
364  void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx);
365  void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx);
366  void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx,
367  				    enum mipi_dsi_dcs_tear_mode mode);
368  void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx);
369  void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx);
370  void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx,
371  					       u16 brightness);
372  void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx,
373  					 u8 format);
374  void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx,
375  					   u16 start, u16 end);
376  void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx,
377  					 u16 start, u16 end);
378  void mipi_dsi_dcs_set_tear_scanline_multi(struct mipi_dsi_multi_context *ctx,
379  					  u16 scanline);
380  
381  /**
382   * mipi_dsi_generic_write_seq - transmit data using a generic write packet
383   *
384   * This macro will print errors for you and will RETURN FROM THE CALLING
385   * FUNCTION (yes this is non-intuitive) upon error.
386   *
387   * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED.
388   * Please replace calls of it with mipi_dsi_generic_write_seq_multi().
389   *
390   * @dsi: DSI peripheral device
391   * @seq: buffer containing the payload
392   */
393  #define mipi_dsi_generic_write_seq(dsi, seq...)                                \
394  	do {                                                                   \
395  		static const u8 d[] = { seq };                                 \
396  		int ret;                                                       \
397  		ret = mipi_dsi_generic_write_chatty(dsi, d, ARRAY_SIZE(d));    \
398  		if (ret < 0)                                                   \
399  			return ret;                                            \
400  	} while (0)
401  
402  /**
403   * mipi_dsi_generic_write_seq_multi - transmit data using a generic write packet
404   *
405   * This macro will print errors for you and error handling is optimized for
406   * callers that call this multiple times in a row.
407   *
408   * @ctx: Context for multiple DSI transactions
409   * @seq: buffer containing the payload
410   */
411  #define mipi_dsi_generic_write_seq_multi(ctx, seq...)                \
412  	do {                                                         \
413  		static const u8 d[] = { seq };                       \
414  		mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \
415  	} while (0)
416  
417  /**
418   * mipi_dsi_dcs_write_seq - transmit a DCS command with payload
419   *
420   * This macro will print errors for you and will RETURN FROM THE CALLING
421   * FUNCTION (yes this is non-intuitive) upon error.
422   *
423   * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED.
424   * Please replace calls of it with mipi_dsi_dcs_write_seq_multi().
425   *
426   * @dsi: DSI peripheral device
427   * @cmd: Command
428   * @seq: buffer containing data to be transmitted
429   */
430  #define mipi_dsi_dcs_write_seq(dsi, cmd, seq...)                               \
431  	do {                                                                   \
432  		static const u8 d[] = { cmd, seq };                            \
433  		int ret;                                                       \
434  		ret = mipi_dsi_dcs_write_buffer_chatty(dsi, d, ARRAY_SIZE(d)); \
435  		if (ret < 0)                                                   \
436  			return ret;                                            \
437  	} while (0)
438  
439  /**
440   * mipi_dsi_dcs_write_seq_multi - transmit a DCS command with payload
441   *
442   * This macro will print errors for you and error handling is optimized for
443   * callers that call this multiple times in a row.
444   *
445   * @ctx: Context for multiple DSI transactions
446   * @cmd: Command
447   * @seq: buffer containing data to be transmitted
448   */
449  #define mipi_dsi_dcs_write_seq_multi(ctx, cmd, seq...)                  \
450  	do {                                                            \
451  		static const u8 d[] = { cmd, seq };                     \
452  		mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \
453  	} while (0)
454  
455  /**
456   * struct mipi_dsi_driver - DSI driver
457   * @driver: device driver model driver
458   * @probe: callback for device binding
459   * @remove: callback for device unbinding
460   * @shutdown: called at shutdown time to quiesce the device
461   */
462  struct mipi_dsi_driver {
463  	struct device_driver driver;
464  	int(*probe)(struct mipi_dsi_device *dsi);
465  	void (*remove)(struct mipi_dsi_device *dsi);
466  	void (*shutdown)(struct mipi_dsi_device *dsi);
467  };
468  
469  static inline struct mipi_dsi_driver *
to_mipi_dsi_driver(struct device_driver * driver)470  to_mipi_dsi_driver(struct device_driver *driver)
471  {
472  	return container_of(driver, struct mipi_dsi_driver, driver);
473  }
474  
mipi_dsi_get_drvdata(const struct mipi_dsi_device * dsi)475  static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
476  {
477  	return dev_get_drvdata(&dsi->dev);
478  }
479  
mipi_dsi_set_drvdata(struct mipi_dsi_device * dsi,void * data)480  static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
481  {
482  	dev_set_drvdata(&dsi->dev, data);
483  }
484  
485  int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
486  				  struct module *owner);
487  void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
488  
489  #define mipi_dsi_driver_register(driver) \
490  	mipi_dsi_driver_register_full(driver, THIS_MODULE)
491  
492  #define module_mipi_dsi_driver(__mipi_dsi_driver) \
493  	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
494  			mipi_dsi_driver_unregister)
495  
496  #endif /* __DRM_MIPI_DSI__ */
497