1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 6 * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. 7 */ 8 9 #ifndef _WMI_H_ 10 #define _WMI_H_ 11 12 #include <linux/types.h> 13 #include <linux/ieee80211.h> 14 15 /* 16 * This file specifies the WMI interface for the Unified Software 17 * Architecture. 18 * 19 * It includes definitions of all the commands and events. Commands are 20 * messages from the host to the target. Events and Replies are messages 21 * from the target to the host. 22 * 23 * Ownership of correctness in regards to WMI commands belongs to the host 24 * driver and the target is not required to validate parameters for value, 25 * proper range, or any other checking. 26 * 27 * Guidelines for extending this interface are below. 28 * 29 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 30 * 31 * 2. Use ONLY u32 type for defining member variables within WMI 32 * command/event structures. Do not use u8, u16, bool or 33 * enum types within these structures. 34 * 35 * 3. DO NOT define bit fields within structures. Implement bit fields 36 * using masks if necessary. Do not use the programming language's bit 37 * field definition. 38 * 39 * 4. Define macros for encode/decode of u8, u16 fields within 40 * the u32 variables. Use these macros for set/get of these fields. 41 * Try to use this to optimize the structure without bloating it with 42 * u32 variables for every lower sized field. 43 * 44 * 5. Do not use PACK/UNPACK attributes for the structures as each member 45 * variable is already 4-byte aligned by virtue of being a u32 46 * type. 47 * 48 * 6. Comment each parameter part of the WMI command/event structure by 49 * using the 2 stars at the beginning of C comment instead of one star to 50 * enable HTML document generation using Doxygen. 51 * 52 */ 53 54 /* Control Path */ 55 struct wmi_cmd_hdr { 56 __le32 cmd_id; 57 } __packed; 58 59 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 60 #define WMI_CMD_HDR_CMD_ID_LSB 0 61 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 62 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 63 64 #define HTC_PROTOCOL_VERSION 0x0002 65 #define WMI_PROTOCOL_VERSION 0x0002 66 67 /* 68 * There is no signed version of __le32, so for a temporary solution come 69 * up with our own version. The idea is from fs/ntfs/endian.h. 70 * 71 * Use a_ prefix so that it doesn't conflict if we get proper support to 72 * linux/types.h. 73 */ 74 typedef __s32 __bitwise a_sle32; 75 a_cpu_to_sle32(s32 val)76 static inline a_sle32 a_cpu_to_sle32(s32 val) 77 { 78 return (__force a_sle32)cpu_to_le32(val); 79 } 80 a_sle32_to_cpu(a_sle32 val)81 static inline s32 a_sle32_to_cpu(a_sle32 val) 82 { 83 return le32_to_cpu((__force __le32)val); 84 } 85 86 enum wmi_service { 87 WMI_SERVICE_BEACON_OFFLOAD = 0, 88 WMI_SERVICE_SCAN_OFFLOAD, 89 WMI_SERVICE_ROAM_OFFLOAD, 90 WMI_SERVICE_BCN_MISS_OFFLOAD, 91 WMI_SERVICE_STA_PWRSAVE, 92 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 93 WMI_SERVICE_AP_UAPSD, 94 WMI_SERVICE_AP_DFS, 95 WMI_SERVICE_11AC, 96 WMI_SERVICE_BLOCKACK, 97 WMI_SERVICE_PHYERR, 98 WMI_SERVICE_BCN_FILTER, 99 WMI_SERVICE_RTT, 100 WMI_SERVICE_RATECTRL, 101 WMI_SERVICE_WOW, 102 WMI_SERVICE_RATECTRL_CACHE, 103 WMI_SERVICE_IRAM_TIDS, 104 WMI_SERVICE_ARPNS_OFFLOAD, 105 WMI_SERVICE_NLO, 106 WMI_SERVICE_GTK_OFFLOAD, 107 WMI_SERVICE_SCAN_SCH, 108 WMI_SERVICE_CSA_OFFLOAD, 109 WMI_SERVICE_CHATTER, 110 WMI_SERVICE_COEX_FREQAVOID, 111 WMI_SERVICE_PACKET_POWER_SAVE, 112 WMI_SERVICE_FORCE_FW_HANG, 113 WMI_SERVICE_GPIO, 114 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 115 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 116 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 117 WMI_SERVICE_STA_KEEP_ALIVE, 118 WMI_SERVICE_TX_ENCAP, 119 WMI_SERVICE_BURST, 120 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 121 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 122 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 123 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 124 WMI_SERVICE_EARLY_RX, 125 WMI_SERVICE_STA_SMPS, 126 WMI_SERVICE_FWTEST, 127 WMI_SERVICE_STA_WMMAC, 128 WMI_SERVICE_TDLS, 129 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 130 WMI_SERVICE_ADAPTIVE_OCS, 131 WMI_SERVICE_BA_SSN_SUPPORT, 132 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 133 WMI_SERVICE_WLAN_HB, 134 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 135 WMI_SERVICE_BATCH_SCAN, 136 WMI_SERVICE_QPOWER, 137 WMI_SERVICE_PLMREQ, 138 WMI_SERVICE_THERMAL_MGMT, 139 WMI_SERVICE_RMC, 140 WMI_SERVICE_MHF_OFFLOAD, 141 WMI_SERVICE_COEX_SAR, 142 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 143 WMI_SERVICE_NAN, 144 WMI_SERVICE_L1SS_STAT, 145 WMI_SERVICE_ESTIMATE_LINKSPEED, 146 WMI_SERVICE_OBSS_SCAN, 147 WMI_SERVICE_TDLS_OFFCHAN, 148 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 149 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 150 WMI_SERVICE_IBSS_PWRSAVE, 151 WMI_SERVICE_LPASS, 152 WMI_SERVICE_EXTSCAN, 153 WMI_SERVICE_D0WOW, 154 WMI_SERVICE_HSOFFLOAD, 155 WMI_SERVICE_ROAM_HO_OFFLOAD, 156 WMI_SERVICE_RX_FULL_REORDER, 157 WMI_SERVICE_DHCP_OFFLOAD, 158 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 159 WMI_SERVICE_MDNS_OFFLOAD, 160 WMI_SERVICE_SAP_AUTH_OFFLOAD, 161 WMI_SERVICE_ATF, 162 WMI_SERVICE_COEX_GPIO, 163 WMI_SERVICE_ENHANCED_PROXY_STA, 164 WMI_SERVICE_TT, 165 WMI_SERVICE_PEER_CACHING, 166 WMI_SERVICE_AUX_SPECTRAL_INTF, 167 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 168 WMI_SERVICE_BSS_CHANNEL_INFO_64, 169 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 170 WMI_SERVICE_MESH_11S, 171 WMI_SERVICE_MESH_NON_11S, 172 WMI_SERVICE_PEER_STATS, 173 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 174 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 175 WMI_SERVICE_TX_MODE_PUSH_ONLY, 176 WMI_SERVICE_TX_MODE_PUSH_PULL, 177 WMI_SERVICE_TX_MODE_DYNAMIC, 178 WMI_SERVICE_VDEV_RX_FILTER, 179 WMI_SERVICE_BTCOEX, 180 WMI_SERVICE_CHECK_CAL_VERSION, 181 WMI_SERVICE_DBGLOG_WARN2, 182 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 183 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 184 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 185 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 186 WMI_SERVICE_SMART_LOGGING_SUPPORT, 187 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 188 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 189 WMI_SERVICE_MGMT_TX_WMI, 190 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 191 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 192 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 193 WMI_SERVICE_TPC_STATS_FINAL, 194 WMI_SERVICE_RESET_CHIP, 195 WMI_SERVICE_SPOOF_MAC_SUPPORT, 196 WMI_SERVICE_TX_DATA_ACK_RSSI, 197 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 198 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 199 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, 200 WMI_SERVICE_THERM_THROT, 201 WMI_SERVICE_RTT_RESPONDER_ROLE, 202 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, 203 WMI_SERVICE_REPORT_AIRTIME, 204 WMI_SERVICE_SYNC_DELETE_CMDS, 205 WMI_SERVICE_TX_PWR_PER_PEER, 206 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS, 207 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, 208 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 209 210 /* Remember to add the new value to wmi_service_name()! */ 211 212 /* keep last */ 213 WMI_SERVICE_MAX, 214 }; 215 216 enum wmi_10x_service { 217 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 218 WMI_10X_SERVICE_SCAN_OFFLOAD, 219 WMI_10X_SERVICE_ROAM_OFFLOAD, 220 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 221 WMI_10X_SERVICE_STA_PWRSAVE, 222 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 223 WMI_10X_SERVICE_AP_UAPSD, 224 WMI_10X_SERVICE_AP_DFS, 225 WMI_10X_SERVICE_11AC, 226 WMI_10X_SERVICE_BLOCKACK, 227 WMI_10X_SERVICE_PHYERR, 228 WMI_10X_SERVICE_BCN_FILTER, 229 WMI_10X_SERVICE_RTT, 230 WMI_10X_SERVICE_RATECTRL, 231 WMI_10X_SERVICE_WOW, 232 WMI_10X_SERVICE_RATECTRL_CACHE, 233 WMI_10X_SERVICE_IRAM_TIDS, 234 WMI_10X_SERVICE_BURST, 235 236 /* introduced in 10.2 */ 237 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 238 WMI_10X_SERVICE_FORCE_FW_HANG, 239 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 240 WMI_10X_SERVICE_ATF, 241 WMI_10X_SERVICE_COEX_GPIO, 242 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 243 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 244 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 245 WMI_10X_SERVICE_MESH, 246 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 247 WMI_10X_SERVICE_PEER_STATS, 248 WMI_10X_SERVICE_RESET_CHIP, 249 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 250 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, 251 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 252 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 253 }; 254 255 enum wmi_main_service { 256 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 257 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 258 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 259 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 260 WMI_MAIN_SERVICE_STA_PWRSAVE, 261 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 262 WMI_MAIN_SERVICE_AP_UAPSD, 263 WMI_MAIN_SERVICE_AP_DFS, 264 WMI_MAIN_SERVICE_11AC, 265 WMI_MAIN_SERVICE_BLOCKACK, 266 WMI_MAIN_SERVICE_PHYERR, 267 WMI_MAIN_SERVICE_BCN_FILTER, 268 WMI_MAIN_SERVICE_RTT, 269 WMI_MAIN_SERVICE_RATECTRL, 270 WMI_MAIN_SERVICE_WOW, 271 WMI_MAIN_SERVICE_RATECTRL_CACHE, 272 WMI_MAIN_SERVICE_IRAM_TIDS, 273 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 274 WMI_MAIN_SERVICE_NLO, 275 WMI_MAIN_SERVICE_GTK_OFFLOAD, 276 WMI_MAIN_SERVICE_SCAN_SCH, 277 WMI_MAIN_SERVICE_CSA_OFFLOAD, 278 WMI_MAIN_SERVICE_CHATTER, 279 WMI_MAIN_SERVICE_COEX_FREQAVOID, 280 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 281 WMI_MAIN_SERVICE_FORCE_FW_HANG, 282 WMI_MAIN_SERVICE_GPIO, 283 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 284 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 285 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 286 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 287 WMI_MAIN_SERVICE_TX_ENCAP, 288 }; 289 290 enum wmi_10_4_service { 291 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 292 WMI_10_4_SERVICE_SCAN_OFFLOAD, 293 WMI_10_4_SERVICE_ROAM_OFFLOAD, 294 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 295 WMI_10_4_SERVICE_STA_PWRSAVE, 296 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 297 WMI_10_4_SERVICE_AP_UAPSD, 298 WMI_10_4_SERVICE_AP_DFS, 299 WMI_10_4_SERVICE_11AC, 300 WMI_10_4_SERVICE_BLOCKACK, 301 WMI_10_4_SERVICE_PHYERR, 302 WMI_10_4_SERVICE_BCN_FILTER, 303 WMI_10_4_SERVICE_RTT, 304 WMI_10_4_SERVICE_RATECTRL, 305 WMI_10_4_SERVICE_WOW, 306 WMI_10_4_SERVICE_RATECTRL_CACHE, 307 WMI_10_4_SERVICE_IRAM_TIDS, 308 WMI_10_4_SERVICE_BURST, 309 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 310 WMI_10_4_SERVICE_GTK_OFFLOAD, 311 WMI_10_4_SERVICE_SCAN_SCH, 312 WMI_10_4_SERVICE_CSA_OFFLOAD, 313 WMI_10_4_SERVICE_CHATTER, 314 WMI_10_4_SERVICE_COEX_FREQAVOID, 315 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 316 WMI_10_4_SERVICE_FORCE_FW_HANG, 317 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 318 WMI_10_4_SERVICE_GPIO, 319 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 320 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 321 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 322 WMI_10_4_SERVICE_TX_ENCAP, 323 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 324 WMI_10_4_SERVICE_EARLY_RX, 325 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 326 WMI_10_4_SERVICE_TT, 327 WMI_10_4_SERVICE_ATF, 328 WMI_10_4_SERVICE_PEER_CACHING, 329 WMI_10_4_SERVICE_COEX_GPIO, 330 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 331 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 332 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 333 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 334 WMI_10_4_SERVICE_MESH_NON_11S, 335 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 336 WMI_10_4_SERVICE_PEER_STATS, 337 WMI_10_4_SERVICE_MESH_11S, 338 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 339 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 340 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 341 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 342 WMI_10_4_SERVICE_VDEV_RX_FILTER, 343 WMI_10_4_SERVICE_BTCOEX, 344 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 345 WMI_10_4_SERVICE_DBGLOG_WARN2, 346 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 347 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 348 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 349 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 350 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 351 WMI_10_4_SERVICE_TDLS, 352 WMI_10_4_SERVICE_TDLS_OFFCHAN, 353 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 354 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 355 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 356 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 357 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 358 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 359 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 360 WMI_10_4_SERVICE_TPC_STATS_FINAL, 361 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 362 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 363 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 364 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 365 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 366 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 367 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 368 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, 369 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, 370 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 371 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, 372 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, 373 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 374 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 375 WMI_10_4_SERVICE_REPORT_AIRTIME, 376 WMI_10_4_SERVICE_TX_PWR_PER_PEER, 377 WMI_10_4_SERVICE_FETCH_PEER_TX_PN, 378 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART, 379 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS, 380 WMI_10_4_SERVICE_QINQ_SUPPORT, 381 WMI_10_4_SERVICE_RESET_CHIP, 382 }; 383 wmi_service_name(enum wmi_service service_id)384 static inline char *wmi_service_name(enum wmi_service service_id) 385 { 386 #define SVCSTR(x) case x: return #x 387 388 switch (service_id) { 389 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 390 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 391 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 392 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 393 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 394 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 395 SVCSTR(WMI_SERVICE_AP_UAPSD); 396 SVCSTR(WMI_SERVICE_AP_DFS); 397 SVCSTR(WMI_SERVICE_11AC); 398 SVCSTR(WMI_SERVICE_BLOCKACK); 399 SVCSTR(WMI_SERVICE_PHYERR); 400 SVCSTR(WMI_SERVICE_BCN_FILTER); 401 SVCSTR(WMI_SERVICE_RTT); 402 SVCSTR(WMI_SERVICE_RATECTRL); 403 SVCSTR(WMI_SERVICE_WOW); 404 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 405 SVCSTR(WMI_SERVICE_IRAM_TIDS); 406 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 407 SVCSTR(WMI_SERVICE_NLO); 408 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 409 SVCSTR(WMI_SERVICE_SCAN_SCH); 410 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 411 SVCSTR(WMI_SERVICE_CHATTER); 412 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 413 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 414 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 415 SVCSTR(WMI_SERVICE_GPIO); 416 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 417 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 418 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 419 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 420 SVCSTR(WMI_SERVICE_TX_ENCAP); 421 SVCSTR(WMI_SERVICE_BURST); 422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 423 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 424 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 425 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 426 SVCSTR(WMI_SERVICE_EARLY_RX); 427 SVCSTR(WMI_SERVICE_STA_SMPS); 428 SVCSTR(WMI_SERVICE_FWTEST); 429 SVCSTR(WMI_SERVICE_STA_WMMAC); 430 SVCSTR(WMI_SERVICE_TDLS); 431 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 432 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 433 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 434 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 435 SVCSTR(WMI_SERVICE_WLAN_HB); 436 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 437 SVCSTR(WMI_SERVICE_BATCH_SCAN); 438 SVCSTR(WMI_SERVICE_QPOWER); 439 SVCSTR(WMI_SERVICE_PLMREQ); 440 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 441 SVCSTR(WMI_SERVICE_RMC); 442 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 443 SVCSTR(WMI_SERVICE_COEX_SAR); 444 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 445 SVCSTR(WMI_SERVICE_NAN); 446 SVCSTR(WMI_SERVICE_L1SS_STAT); 447 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 448 SVCSTR(WMI_SERVICE_OBSS_SCAN); 449 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 451 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 452 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 453 SVCSTR(WMI_SERVICE_LPASS); 454 SVCSTR(WMI_SERVICE_EXTSCAN); 455 SVCSTR(WMI_SERVICE_D0WOW); 456 SVCSTR(WMI_SERVICE_HSOFFLOAD); 457 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 458 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 459 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 460 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 461 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 462 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 463 SVCSTR(WMI_SERVICE_ATF); 464 SVCSTR(WMI_SERVICE_COEX_GPIO); 465 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 466 SVCSTR(WMI_SERVICE_TT); 467 SVCSTR(WMI_SERVICE_PEER_CACHING); 468 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 469 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 470 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 471 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 472 SVCSTR(WMI_SERVICE_MESH_11S); 473 SVCSTR(WMI_SERVICE_MESH_NON_11S); 474 SVCSTR(WMI_SERVICE_PEER_STATS); 475 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 476 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 478 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 479 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 480 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 481 SVCSTR(WMI_SERVICE_BTCOEX); 482 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 483 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 484 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 485 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 486 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 487 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 488 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 489 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 490 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 491 SVCSTR(WMI_SERVICE_MGMT_TX_WMI); 492 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 493 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 494 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 495 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 496 SVCSTR(WMI_SERVICE_RESET_CHIP); 497 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); 498 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 499 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 500 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); 501 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); 502 SVCSTR(WMI_SERVICE_THERM_THROT); 503 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); 504 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); 505 SVCSTR(WMI_SERVICE_REPORT_AIRTIME); 506 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); 507 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); 508 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS); 509 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT); 510 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT); 511 512 case WMI_SERVICE_MAX: 513 return NULL; 514 } 515 516 #undef SVCSTR 517 518 return NULL; 519 } 520 521 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 522 ((svc_id) < (len) && \ 523 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 524 BIT((svc_id) % (sizeof(u32)))) 525 526 /* This extension is required to accommodate new services, current limit 527 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 528 * wmi_service word. Extending this to make use of remaining unused bits 529 * for new services. 530 */ 531 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 532 ((svc_id) >= (len) && \ 533 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 534 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 535 536 #define SVCMAP(x, y, len) \ 537 do { \ 538 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 539 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 540 __set_bit(y, out); \ 541 } while (0) 542 wmi_10x_svc_map(const __le32 * in,unsigned long * out,size_t len)543 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 544 size_t len) 545 { 546 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 547 WMI_SERVICE_BEACON_OFFLOAD, len); 548 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 549 WMI_SERVICE_SCAN_OFFLOAD, len); 550 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 551 WMI_SERVICE_ROAM_OFFLOAD, len); 552 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 553 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 554 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 555 WMI_SERVICE_STA_PWRSAVE, len); 556 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 557 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 558 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 559 WMI_SERVICE_AP_UAPSD, len); 560 SVCMAP(WMI_10X_SERVICE_AP_DFS, 561 WMI_SERVICE_AP_DFS, len); 562 SVCMAP(WMI_10X_SERVICE_11AC, 563 WMI_SERVICE_11AC, len); 564 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 565 WMI_SERVICE_BLOCKACK, len); 566 SVCMAP(WMI_10X_SERVICE_PHYERR, 567 WMI_SERVICE_PHYERR, len); 568 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 569 WMI_SERVICE_BCN_FILTER, len); 570 SVCMAP(WMI_10X_SERVICE_RTT, 571 WMI_SERVICE_RTT, len); 572 SVCMAP(WMI_10X_SERVICE_RATECTRL, 573 WMI_SERVICE_RATECTRL, len); 574 SVCMAP(WMI_10X_SERVICE_WOW, 575 WMI_SERVICE_WOW, len); 576 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 577 WMI_SERVICE_RATECTRL_CACHE, len); 578 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 579 WMI_SERVICE_IRAM_TIDS, len); 580 SVCMAP(WMI_10X_SERVICE_BURST, 581 WMI_SERVICE_BURST, len); 582 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 583 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 584 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 585 WMI_SERVICE_FORCE_FW_HANG, len); 586 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 587 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 588 SVCMAP(WMI_10X_SERVICE_ATF, 589 WMI_SERVICE_ATF, len); 590 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 591 WMI_SERVICE_COEX_GPIO, len); 592 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 593 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 594 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 595 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 596 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 597 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 598 SVCMAP(WMI_10X_SERVICE_MESH, 599 WMI_SERVICE_MESH_11S, len); 600 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 601 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 602 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 603 WMI_SERVICE_PEER_STATS, len); 604 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 605 WMI_SERVICE_RESET_CHIP, len); 606 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 607 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 608 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 609 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); 610 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 611 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 612 } 613 wmi_main_svc_map(const __le32 * in,unsigned long * out,size_t len)614 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 615 size_t len) 616 { 617 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 618 WMI_SERVICE_BEACON_OFFLOAD, len); 619 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 620 WMI_SERVICE_SCAN_OFFLOAD, len); 621 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 622 WMI_SERVICE_ROAM_OFFLOAD, len); 623 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 624 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 625 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 626 WMI_SERVICE_STA_PWRSAVE, len); 627 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 628 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 629 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 630 WMI_SERVICE_AP_UAPSD, len); 631 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 632 WMI_SERVICE_AP_DFS, len); 633 SVCMAP(WMI_MAIN_SERVICE_11AC, 634 WMI_SERVICE_11AC, len); 635 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 636 WMI_SERVICE_BLOCKACK, len); 637 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 638 WMI_SERVICE_PHYERR, len); 639 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 640 WMI_SERVICE_BCN_FILTER, len); 641 SVCMAP(WMI_MAIN_SERVICE_RTT, 642 WMI_SERVICE_RTT, len); 643 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 644 WMI_SERVICE_RATECTRL, len); 645 SVCMAP(WMI_MAIN_SERVICE_WOW, 646 WMI_SERVICE_WOW, len); 647 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 648 WMI_SERVICE_RATECTRL_CACHE, len); 649 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 650 WMI_SERVICE_IRAM_TIDS, len); 651 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 652 WMI_SERVICE_ARPNS_OFFLOAD, len); 653 SVCMAP(WMI_MAIN_SERVICE_NLO, 654 WMI_SERVICE_NLO, len); 655 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 656 WMI_SERVICE_GTK_OFFLOAD, len); 657 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 658 WMI_SERVICE_SCAN_SCH, len); 659 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 660 WMI_SERVICE_CSA_OFFLOAD, len); 661 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 662 WMI_SERVICE_CHATTER, len); 663 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 664 WMI_SERVICE_COEX_FREQAVOID, len); 665 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 666 WMI_SERVICE_PACKET_POWER_SAVE, len); 667 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 668 WMI_SERVICE_FORCE_FW_HANG, len); 669 SVCMAP(WMI_MAIN_SERVICE_GPIO, 670 WMI_SERVICE_GPIO, len); 671 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 672 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 673 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 674 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 675 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 676 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 677 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 678 WMI_SERVICE_STA_KEEP_ALIVE, len); 679 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 680 WMI_SERVICE_TX_ENCAP, len); 681 } 682 wmi_10_4_svc_map(const __le32 * in,unsigned long * out,size_t len)683 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 684 size_t len) 685 { 686 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 687 WMI_SERVICE_BEACON_OFFLOAD, len); 688 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 689 WMI_SERVICE_SCAN_OFFLOAD, len); 690 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 691 WMI_SERVICE_ROAM_OFFLOAD, len); 692 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 693 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 694 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 695 WMI_SERVICE_STA_PWRSAVE, len); 696 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 697 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 698 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 699 WMI_SERVICE_AP_UAPSD, len); 700 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 701 WMI_SERVICE_AP_DFS, len); 702 SVCMAP(WMI_10_4_SERVICE_11AC, 703 WMI_SERVICE_11AC, len); 704 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 705 WMI_SERVICE_BLOCKACK, len); 706 SVCMAP(WMI_10_4_SERVICE_PHYERR, 707 WMI_SERVICE_PHYERR, len); 708 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 709 WMI_SERVICE_BCN_FILTER, len); 710 SVCMAP(WMI_10_4_SERVICE_RTT, 711 WMI_SERVICE_RTT, len); 712 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 713 WMI_SERVICE_RATECTRL, len); 714 SVCMAP(WMI_10_4_SERVICE_WOW, 715 WMI_SERVICE_WOW, len); 716 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 717 WMI_SERVICE_RATECTRL_CACHE, len); 718 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 719 WMI_SERVICE_IRAM_TIDS, len); 720 SVCMAP(WMI_10_4_SERVICE_BURST, 721 WMI_SERVICE_BURST, len); 722 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 723 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 724 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 725 WMI_SERVICE_GTK_OFFLOAD, len); 726 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 727 WMI_SERVICE_SCAN_SCH, len); 728 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 729 WMI_SERVICE_CSA_OFFLOAD, len); 730 SVCMAP(WMI_10_4_SERVICE_CHATTER, 731 WMI_SERVICE_CHATTER, len); 732 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 733 WMI_SERVICE_COEX_FREQAVOID, len); 734 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 735 WMI_SERVICE_PACKET_POWER_SAVE, len); 736 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 737 WMI_SERVICE_FORCE_FW_HANG, len); 738 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 739 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 740 SVCMAP(WMI_10_4_SERVICE_GPIO, 741 WMI_SERVICE_GPIO, len); 742 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 743 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 744 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 745 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 746 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 747 WMI_SERVICE_STA_KEEP_ALIVE, len); 748 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 749 WMI_SERVICE_TX_ENCAP, len); 750 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 751 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 752 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 753 WMI_SERVICE_EARLY_RX, len); 754 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 755 WMI_SERVICE_ENHANCED_PROXY_STA, len); 756 SVCMAP(WMI_10_4_SERVICE_TT, 757 WMI_SERVICE_TT, len); 758 SVCMAP(WMI_10_4_SERVICE_ATF, 759 WMI_SERVICE_ATF, len); 760 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 761 WMI_SERVICE_PEER_CACHING, len); 762 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 763 WMI_SERVICE_COEX_GPIO, len); 764 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 765 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 766 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 767 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 768 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 769 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 770 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 771 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 772 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 773 WMI_SERVICE_MESH_NON_11S, len); 774 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 775 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 776 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 777 WMI_SERVICE_PEER_STATS, len); 778 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 779 WMI_SERVICE_MESH_11S, len); 780 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 781 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 782 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 783 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 784 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 785 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 786 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 787 WMI_SERVICE_TX_MODE_DYNAMIC, len); 788 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 789 WMI_SERVICE_VDEV_RX_FILTER, len); 790 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 791 WMI_SERVICE_BTCOEX, len); 792 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 793 WMI_SERVICE_CHECK_CAL_VERSION, len); 794 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 795 WMI_SERVICE_DBGLOG_WARN2, len); 796 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 797 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 798 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 799 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 800 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 801 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 802 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 803 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 804 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 805 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 806 SVCMAP(WMI_10_4_SERVICE_TDLS, 807 WMI_SERVICE_TDLS, len); 808 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 809 WMI_SERVICE_TDLS_OFFCHAN, len); 810 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 811 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 812 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 813 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 814 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 815 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 816 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 817 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 818 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 819 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 820 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 821 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 822 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 823 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 824 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 825 WMI_SERVICE_TPC_STATS_FINAL, len); 826 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 827 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 828 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 829 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 830 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 831 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); 832 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 833 WMI_SERVICE_RTT_RESPONDER_ROLE, len); 834 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 835 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 836 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, 837 WMI_SERVICE_REPORT_AIRTIME, len); 838 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, 839 WMI_SERVICE_TX_PWR_PER_PEER, len); 840 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP, 841 WMI_SERVICE_RESET_CHIP, len); 842 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 843 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len); 844 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 845 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len); 846 } 847 848 #undef SVCMAP 849 850 /* 2 word representation of MAC addr */ 851 struct wmi_mac_addr { 852 union { 853 u8 addr[6]; 854 struct { 855 u32 word0; 856 u32 word1; 857 } __packed; 858 } __packed; 859 } __packed; 860 861 struct wmi_cmd_map { 862 u32 init_cmdid; 863 u32 start_scan_cmdid; 864 u32 stop_scan_cmdid; 865 u32 scan_chan_list_cmdid; 866 u32 scan_sch_prio_tbl_cmdid; 867 u32 scan_prob_req_oui_cmdid; 868 u32 pdev_set_regdomain_cmdid; 869 u32 pdev_set_channel_cmdid; 870 u32 pdev_set_param_cmdid; 871 u32 pdev_pktlog_enable_cmdid; 872 u32 pdev_pktlog_disable_cmdid; 873 u32 pdev_set_wmm_params_cmdid; 874 u32 pdev_set_ht_cap_ie_cmdid; 875 u32 pdev_set_vht_cap_ie_cmdid; 876 u32 pdev_set_dscp_tid_map_cmdid; 877 u32 pdev_set_quiet_mode_cmdid; 878 u32 pdev_green_ap_ps_enable_cmdid; 879 u32 pdev_get_tpc_config_cmdid; 880 u32 pdev_set_base_macaddr_cmdid; 881 u32 vdev_create_cmdid; 882 u32 vdev_delete_cmdid; 883 u32 vdev_start_request_cmdid; 884 u32 vdev_restart_request_cmdid; 885 u32 vdev_up_cmdid; 886 u32 vdev_stop_cmdid; 887 u32 vdev_down_cmdid; 888 u32 vdev_set_param_cmdid; 889 u32 vdev_install_key_cmdid; 890 u32 peer_create_cmdid; 891 u32 peer_delete_cmdid; 892 u32 peer_flush_tids_cmdid; 893 u32 peer_set_param_cmdid; 894 u32 peer_assoc_cmdid; 895 u32 peer_add_wds_entry_cmdid; 896 u32 peer_remove_wds_entry_cmdid; 897 u32 peer_mcast_group_cmdid; 898 u32 bcn_tx_cmdid; 899 u32 pdev_send_bcn_cmdid; 900 u32 bcn_tmpl_cmdid; 901 u32 bcn_filter_rx_cmdid; 902 u32 prb_req_filter_rx_cmdid; 903 u32 mgmt_tx_cmdid; 904 u32 mgmt_tx_send_cmdid; 905 u32 prb_tmpl_cmdid; 906 u32 addba_clear_resp_cmdid; 907 u32 addba_send_cmdid; 908 u32 addba_status_cmdid; 909 u32 delba_send_cmdid; 910 u32 addba_set_resp_cmdid; 911 u32 send_singleamsdu_cmdid; 912 u32 sta_powersave_mode_cmdid; 913 u32 sta_powersave_param_cmdid; 914 u32 sta_mimo_ps_mode_cmdid; 915 u32 pdev_dfs_enable_cmdid; 916 u32 pdev_dfs_disable_cmdid; 917 u32 roam_scan_mode; 918 u32 roam_scan_rssi_threshold; 919 u32 roam_scan_period; 920 u32 roam_scan_rssi_change_threshold; 921 u32 roam_ap_profile; 922 u32 ofl_scan_add_ap_profile; 923 u32 ofl_scan_remove_ap_profile; 924 u32 ofl_scan_period; 925 u32 p2p_dev_set_device_info; 926 u32 p2p_dev_set_discoverability; 927 u32 p2p_go_set_beacon_ie; 928 u32 p2p_go_set_probe_resp_ie; 929 u32 p2p_set_vendor_ie_data_cmdid; 930 u32 ap_ps_peer_param_cmdid; 931 u32 ap_ps_peer_uapsd_coex_cmdid; 932 u32 peer_rate_retry_sched_cmdid; 933 u32 wlan_profile_trigger_cmdid; 934 u32 wlan_profile_set_hist_intvl_cmdid; 935 u32 wlan_profile_get_profile_data_cmdid; 936 u32 wlan_profile_enable_profile_id_cmdid; 937 u32 wlan_profile_list_profile_id_cmdid; 938 u32 pdev_suspend_cmdid; 939 u32 pdev_resume_cmdid; 940 u32 add_bcn_filter_cmdid; 941 u32 rmv_bcn_filter_cmdid; 942 u32 wow_add_wake_pattern_cmdid; 943 u32 wow_del_wake_pattern_cmdid; 944 u32 wow_enable_disable_wake_event_cmdid; 945 u32 wow_enable_cmdid; 946 u32 wow_hostwakeup_from_sleep_cmdid; 947 u32 rtt_measreq_cmdid; 948 u32 rtt_tsf_cmdid; 949 u32 vdev_spectral_scan_configure_cmdid; 950 u32 vdev_spectral_scan_enable_cmdid; 951 u32 request_stats_cmdid; 952 u32 request_peer_stats_info_cmdid; 953 u32 set_arp_ns_offload_cmdid; 954 u32 network_list_offload_config_cmdid; 955 u32 gtk_offload_cmdid; 956 u32 csa_offload_enable_cmdid; 957 u32 csa_offload_chanswitch_cmdid; 958 u32 chatter_set_mode_cmdid; 959 u32 peer_tid_addba_cmdid; 960 u32 peer_tid_delba_cmdid; 961 u32 sta_dtim_ps_method_cmdid; 962 u32 sta_uapsd_auto_trig_cmdid; 963 u32 sta_keepalive_cmd; 964 u32 echo_cmdid; 965 u32 pdev_utf_cmdid; 966 u32 dbglog_cfg_cmdid; 967 u32 pdev_qvit_cmdid; 968 u32 pdev_ftm_intg_cmdid; 969 u32 vdev_set_keepalive_cmdid; 970 u32 vdev_get_keepalive_cmdid; 971 u32 force_fw_hang_cmdid; 972 u32 gpio_config_cmdid; 973 u32 gpio_output_cmdid; 974 u32 pdev_get_temperature_cmdid; 975 u32 vdev_set_wmm_params_cmdid; 976 u32 tdls_set_state_cmdid; 977 u32 tdls_peer_update_cmdid; 978 u32 adaptive_qcs_cmdid; 979 u32 scan_update_request_cmdid; 980 u32 vdev_standby_response_cmdid; 981 u32 vdev_resume_response_cmdid; 982 u32 wlan_peer_caching_add_peer_cmdid; 983 u32 wlan_peer_caching_evict_peer_cmdid; 984 u32 wlan_peer_caching_restore_peer_cmdid; 985 u32 wlan_peer_caching_print_all_peers_info_cmdid; 986 u32 peer_update_wds_entry_cmdid; 987 u32 peer_add_proxy_sta_entry_cmdid; 988 u32 rtt_keepalive_cmdid; 989 u32 oem_req_cmdid; 990 u32 nan_cmdid; 991 u32 vdev_ratemask_cmdid; 992 u32 qboost_cfg_cmdid; 993 u32 pdev_smart_ant_enable_cmdid; 994 u32 pdev_smart_ant_set_rx_antenna_cmdid; 995 u32 peer_smart_ant_set_tx_antenna_cmdid; 996 u32 peer_smart_ant_set_train_info_cmdid; 997 u32 peer_smart_ant_set_node_config_ops_cmdid; 998 u32 pdev_set_antenna_switch_table_cmdid; 999 u32 pdev_set_ctl_table_cmdid; 1000 u32 pdev_set_mimogain_table_cmdid; 1001 u32 pdev_ratepwr_table_cmdid; 1002 u32 pdev_ratepwr_chainmsk_table_cmdid; 1003 u32 pdev_fips_cmdid; 1004 u32 tt_set_conf_cmdid; 1005 u32 fwtest_cmdid; 1006 u32 vdev_atf_request_cmdid; 1007 u32 peer_atf_request_cmdid; 1008 u32 pdev_get_ani_cck_config_cmdid; 1009 u32 pdev_get_ani_ofdm_config_cmdid; 1010 u32 pdev_reserve_ast_entry_cmdid; 1011 u32 pdev_get_nfcal_power_cmdid; 1012 u32 pdev_get_tpc_cmdid; 1013 u32 pdev_get_ast_info_cmdid; 1014 u32 vdev_set_dscp_tid_map_cmdid; 1015 u32 pdev_get_info_cmdid; 1016 u32 vdev_get_info_cmdid; 1017 u32 vdev_filter_neighbor_rx_packets_cmdid; 1018 u32 mu_cal_start_cmdid; 1019 u32 set_cca_params_cmdid; 1020 u32 pdev_bss_chan_info_request_cmdid; 1021 u32 pdev_enable_adaptive_cca_cmdid; 1022 u32 ext_resource_cfg_cmdid; 1023 u32 vdev_set_ie_cmdid; 1024 u32 set_lteu_config_cmdid; 1025 u32 atf_ssid_grouping_request_cmdid; 1026 u32 peer_atf_ext_request_cmdid; 1027 u32 set_periodic_channel_stats_cfg_cmdid; 1028 u32 peer_bwf_request_cmdid; 1029 u32 btcoex_cfg_cmdid; 1030 u32 peer_tx_mu_txmit_count_cmdid; 1031 u32 peer_tx_mu_txmit_rstcnt_cmdid; 1032 u32 peer_gid_userpos_list_cmdid; 1033 u32 pdev_check_cal_version_cmdid; 1034 u32 coex_version_cfg_cmid; 1035 u32 pdev_get_rx_filter_cmdid; 1036 u32 pdev_extended_nss_cfg_cmdid; 1037 u32 vdev_set_scan_nac_rssi_cmdid; 1038 u32 prog_gpio_band_select_cmdid; 1039 u32 config_smart_logging_cmdid; 1040 u32 debug_fatal_condition_cmdid; 1041 u32 get_tsf_timer_cmdid; 1042 u32 pdev_get_tpc_table_cmdid; 1043 u32 vdev_sifs_trigger_time_cmdid; 1044 u32 pdev_wds_entry_list_cmdid; 1045 u32 tdls_set_offchan_mode_cmdid; 1046 u32 radar_found_cmdid; 1047 u32 set_bb_timing_cmdid; 1048 u32 per_peer_per_tid_config_cmdid; 1049 }; 1050 1051 /* 1052 * wmi command groups. 1053 */ 1054 enum wmi_cmd_group { 1055 /* 0 to 2 are reserved */ 1056 WMI_GRP_START = 0x3, 1057 WMI_GRP_SCAN = WMI_GRP_START, 1058 WMI_GRP_PDEV, 1059 WMI_GRP_VDEV, 1060 WMI_GRP_PEER, 1061 WMI_GRP_MGMT, 1062 WMI_GRP_BA_NEG, 1063 WMI_GRP_STA_PS, 1064 WMI_GRP_DFS, 1065 WMI_GRP_ROAM, 1066 WMI_GRP_OFL_SCAN, 1067 WMI_GRP_P2P, 1068 WMI_GRP_AP_PS, 1069 WMI_GRP_RATE_CTRL, 1070 WMI_GRP_PROFILE, 1071 WMI_GRP_SUSPEND, 1072 WMI_GRP_BCN_FILTER, 1073 WMI_GRP_WOW, 1074 WMI_GRP_RTT, 1075 WMI_GRP_SPECTRAL, 1076 WMI_GRP_STATS, 1077 WMI_GRP_ARP_NS_OFL, 1078 WMI_GRP_NLO_OFL, 1079 WMI_GRP_GTK_OFL, 1080 WMI_GRP_CSA_OFL, 1081 WMI_GRP_CHATTER, 1082 WMI_GRP_TID_ADDBA, 1083 WMI_GRP_MISC, 1084 WMI_GRP_GPIO, 1085 }; 1086 1087 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1088 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1089 1090 #define WMI_CMD_UNSUPPORTED 0 1091 1092 /* Command IDs and command events for MAIN FW. */ 1093 enum wmi_cmd_id { 1094 WMI_INIT_CMDID = 0x1, 1095 1096 /* Scan specific commands */ 1097 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1098 WMI_STOP_SCAN_CMDID, 1099 WMI_SCAN_CHAN_LIST_CMDID, 1100 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1101 1102 /* PDEV (physical device) specific commands */ 1103 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1104 WMI_PDEV_SET_CHANNEL_CMDID, 1105 WMI_PDEV_SET_PARAM_CMDID, 1106 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1107 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1108 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1109 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1110 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1111 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1112 WMI_PDEV_SET_QUIET_MODE_CMDID, 1113 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1114 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1115 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1116 1117 /* VDEV (virtual device) specific commands */ 1118 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1119 WMI_VDEV_DELETE_CMDID, 1120 WMI_VDEV_START_REQUEST_CMDID, 1121 WMI_VDEV_RESTART_REQUEST_CMDID, 1122 WMI_VDEV_UP_CMDID, 1123 WMI_VDEV_STOP_CMDID, 1124 WMI_VDEV_DOWN_CMDID, 1125 WMI_VDEV_SET_PARAM_CMDID, 1126 WMI_VDEV_INSTALL_KEY_CMDID, 1127 1128 /* peer specific commands */ 1129 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1130 WMI_PEER_DELETE_CMDID, 1131 WMI_PEER_FLUSH_TIDS_CMDID, 1132 WMI_PEER_SET_PARAM_CMDID, 1133 WMI_PEER_ASSOC_CMDID, 1134 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1135 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1136 WMI_PEER_MCAST_GROUP_CMDID, 1137 1138 /* beacon/management specific commands */ 1139 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1140 WMI_PDEV_SEND_BCN_CMDID, 1141 WMI_BCN_TMPL_CMDID, 1142 WMI_BCN_FILTER_RX_CMDID, 1143 WMI_PRB_REQ_FILTER_RX_CMDID, 1144 WMI_MGMT_TX_CMDID, 1145 WMI_PRB_TMPL_CMDID, 1146 1147 /* commands to directly control BA negotiation directly from host. */ 1148 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1149 WMI_ADDBA_SEND_CMDID, 1150 WMI_ADDBA_STATUS_CMDID, 1151 WMI_DELBA_SEND_CMDID, 1152 WMI_ADDBA_SET_RESP_CMDID, 1153 WMI_SEND_SINGLEAMSDU_CMDID, 1154 1155 /* Station power save specific config */ 1156 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1157 WMI_STA_POWERSAVE_PARAM_CMDID, 1158 WMI_STA_MIMO_PS_MODE_CMDID, 1159 1160 /** DFS-specific commands */ 1161 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1162 WMI_PDEV_DFS_DISABLE_CMDID, 1163 1164 /* Roaming specific commands */ 1165 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1166 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1167 WMI_ROAM_SCAN_PERIOD, 1168 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1169 WMI_ROAM_AP_PROFILE, 1170 1171 /* offload scan specific commands */ 1172 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1173 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1174 WMI_OFL_SCAN_PERIOD, 1175 1176 /* P2P specific commands */ 1177 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1178 WMI_P2P_DEV_SET_DISCOVERABILITY, 1179 WMI_P2P_GO_SET_BEACON_IE, 1180 WMI_P2P_GO_SET_PROBE_RESP_IE, 1181 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1182 1183 /* AP power save specific config */ 1184 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1185 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1186 1187 /* Rate-control specific commands */ 1188 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1189 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1190 1191 /* WLAN Profiling commands. */ 1192 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1193 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1194 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1195 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1196 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1197 1198 /* Suspend resume command Ids */ 1199 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1200 WMI_PDEV_RESUME_CMDID, 1201 1202 /* Beacon filter commands */ 1203 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1204 WMI_RMV_BCN_FILTER_CMDID, 1205 1206 /* WOW Specific WMI commands*/ 1207 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1208 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1209 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1210 WMI_WOW_ENABLE_CMDID, 1211 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1212 1213 /* RTT measurement related cmd */ 1214 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1215 WMI_RTT_TSF_CMDID, 1216 1217 /* spectral scan commands */ 1218 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1219 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1220 1221 /* F/W stats */ 1222 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1223 1224 /* ARP OFFLOAD REQUEST*/ 1225 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1226 1227 /* NS offload confid*/ 1228 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1229 1230 /* GTK offload Specific WMI commands*/ 1231 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1232 1233 /* CSA offload Specific WMI commands*/ 1234 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1235 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1236 1237 /* Chatter commands*/ 1238 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1239 1240 /* addba specific commands */ 1241 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1242 WMI_PEER_TID_DELBA_CMDID, 1243 1244 /* set station mimo powersave method */ 1245 WMI_STA_DTIM_PS_METHOD_CMDID, 1246 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1247 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1248 1249 /* STA Keep alive parameter configuration, 1250 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1251 */ 1252 WMI_STA_KEEPALIVE_CMD, 1253 1254 /* misc command group */ 1255 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1256 WMI_PDEV_UTF_CMDID, 1257 WMI_DBGLOG_CFG_CMDID, 1258 WMI_PDEV_QVIT_CMDID, 1259 WMI_PDEV_FTM_INTG_CMDID, 1260 WMI_VDEV_SET_KEEPALIVE_CMDID, 1261 WMI_VDEV_GET_KEEPALIVE_CMDID, 1262 WMI_FORCE_FW_HANG_CMDID, 1263 1264 /* GPIO Configuration */ 1265 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1266 WMI_GPIO_OUTPUT_CMDID, 1267 }; 1268 1269 enum wmi_event_id { 1270 WMI_SERVICE_READY_EVENTID = 0x1, 1271 WMI_READY_EVENTID, 1272 WMI_SERVICE_AVAILABLE_EVENTID, 1273 1274 /* Scan specific events */ 1275 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1276 1277 /* PDEV specific events */ 1278 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1279 WMI_CHAN_INFO_EVENTID, 1280 WMI_PHYERR_EVENTID, 1281 1282 /* VDEV specific events */ 1283 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1284 WMI_VDEV_STOPPED_EVENTID, 1285 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1286 1287 /* peer specific events */ 1288 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1289 1290 /* beacon/mgmt specific events */ 1291 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1292 WMI_HOST_SWBA_EVENTID, 1293 WMI_TBTTOFFSET_UPDATE_EVENTID, 1294 1295 /* ADDBA Related WMI Events*/ 1296 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1297 WMI_TX_ADDBA_COMPLETE_EVENTID, 1298 1299 /* Roam event to trigger roaming on host */ 1300 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1301 WMI_PROFILE_MATCH, 1302 1303 /* WoW */ 1304 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1305 1306 /* RTT */ 1307 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1308 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1309 WMI_RTT_ERROR_REPORT_EVENTID, 1310 1311 /* GTK offload */ 1312 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1313 WMI_GTK_REKEY_FAIL_EVENTID, 1314 1315 /* CSA IE received event */ 1316 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1317 1318 /* Misc events */ 1319 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1320 WMI_PDEV_UTF_EVENTID, 1321 WMI_DEBUG_MESG_EVENTID, 1322 WMI_UPDATE_STATS_EVENTID, 1323 WMI_DEBUG_PRINT_EVENTID, 1324 WMI_DCS_INTERFERENCE_EVENTID, 1325 WMI_PDEV_QVIT_EVENTID, 1326 WMI_WLAN_PROFILE_DATA_EVENTID, 1327 WMI_PDEV_FTM_INTG_EVENTID, 1328 WMI_WLAN_FREQ_AVOID_EVENTID, 1329 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1330 1331 /* GPIO Event */ 1332 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1333 }; 1334 1335 /* Command IDs and command events for 10.X firmware */ 1336 enum wmi_10x_cmd_id { 1337 WMI_10X_START_CMDID = 0x9000, 1338 WMI_10X_END_CMDID = 0x9FFF, 1339 1340 /* initialize the wlan sub system */ 1341 WMI_10X_INIT_CMDID, 1342 1343 /* Scan specific commands */ 1344 1345 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1346 WMI_10X_STOP_SCAN_CMDID, 1347 WMI_10X_SCAN_CHAN_LIST_CMDID, 1348 WMI_10X_ECHO_CMDID, 1349 1350 /* PDEV(physical device) specific commands */ 1351 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1352 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1353 WMI_10X_PDEV_SET_PARAM_CMDID, 1354 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1355 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1356 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1357 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1358 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1359 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1360 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1361 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1362 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1363 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1364 1365 /* VDEV(virtual device) specific commands */ 1366 WMI_10X_VDEV_CREATE_CMDID, 1367 WMI_10X_VDEV_DELETE_CMDID, 1368 WMI_10X_VDEV_START_REQUEST_CMDID, 1369 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1370 WMI_10X_VDEV_UP_CMDID, 1371 WMI_10X_VDEV_STOP_CMDID, 1372 WMI_10X_VDEV_DOWN_CMDID, 1373 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1374 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1375 WMI_10X_VDEV_SET_PARAM_CMDID, 1376 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1377 1378 /* peer specific commands */ 1379 WMI_10X_PEER_CREATE_CMDID, 1380 WMI_10X_PEER_DELETE_CMDID, 1381 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1382 WMI_10X_PEER_SET_PARAM_CMDID, 1383 WMI_10X_PEER_ASSOC_CMDID, 1384 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1385 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1386 WMI_10X_PEER_MCAST_GROUP_CMDID, 1387 1388 /* beacon/management specific commands */ 1389 1390 WMI_10X_BCN_TX_CMDID, 1391 WMI_10X_BCN_PRB_TMPL_CMDID, 1392 WMI_10X_BCN_FILTER_RX_CMDID, 1393 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1394 WMI_10X_MGMT_TX_CMDID, 1395 1396 /* commands to directly control ba negotiation directly from host. */ 1397 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1398 WMI_10X_ADDBA_SEND_CMDID, 1399 WMI_10X_ADDBA_STATUS_CMDID, 1400 WMI_10X_DELBA_SEND_CMDID, 1401 WMI_10X_ADDBA_SET_RESP_CMDID, 1402 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1403 1404 /* Station power save specific config */ 1405 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1406 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1407 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1408 1409 /* set debug log config */ 1410 WMI_10X_DBGLOG_CFG_CMDID, 1411 1412 /* DFS-specific commands */ 1413 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1414 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1415 1416 /* QVIT specific command id */ 1417 WMI_10X_PDEV_QVIT_CMDID, 1418 1419 /* Offload Scan and Roaming related commands */ 1420 WMI_10X_ROAM_SCAN_MODE, 1421 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1422 WMI_10X_ROAM_SCAN_PERIOD, 1423 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1424 WMI_10X_ROAM_AP_PROFILE, 1425 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1426 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1427 WMI_10X_OFL_SCAN_PERIOD, 1428 1429 /* P2P specific commands */ 1430 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1431 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1432 WMI_10X_P2P_GO_SET_BEACON_IE, 1433 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1434 1435 /* AP power save specific config */ 1436 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1437 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1438 1439 /* Rate-control specific commands */ 1440 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1441 1442 /* WLAN Profiling commands. */ 1443 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1444 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1445 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1446 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1447 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1448 1449 /* Suspend resume command Ids */ 1450 WMI_10X_PDEV_SUSPEND_CMDID, 1451 WMI_10X_PDEV_RESUME_CMDID, 1452 1453 /* Beacon filter commands */ 1454 WMI_10X_ADD_BCN_FILTER_CMDID, 1455 WMI_10X_RMV_BCN_FILTER_CMDID, 1456 1457 /* WOW Specific WMI commands*/ 1458 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1459 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1460 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1461 WMI_10X_WOW_ENABLE_CMDID, 1462 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1463 1464 /* RTT measurement related cmd */ 1465 WMI_10X_RTT_MEASREQ_CMDID, 1466 WMI_10X_RTT_TSF_CMDID, 1467 1468 /* transmit beacon by value */ 1469 WMI_10X_PDEV_SEND_BCN_CMDID, 1470 1471 /* F/W stats */ 1472 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1473 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1474 WMI_10X_REQUEST_STATS_CMDID, 1475 1476 /* GPIO Configuration */ 1477 WMI_10X_GPIO_CONFIG_CMDID, 1478 WMI_10X_GPIO_OUTPUT_CMDID, 1479 1480 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1481 }; 1482 1483 enum wmi_10x_event_id { 1484 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1485 WMI_10X_READY_EVENTID, 1486 WMI_10X_START_EVENTID = 0x9000, 1487 WMI_10X_END_EVENTID = 0x9FFF, 1488 1489 /* Scan specific events */ 1490 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1491 WMI_10X_ECHO_EVENTID, 1492 WMI_10X_DEBUG_MESG_EVENTID, 1493 WMI_10X_UPDATE_STATS_EVENTID, 1494 1495 /* Instantaneous RSSI event */ 1496 WMI_10X_INST_RSSI_STATS_EVENTID, 1497 1498 /* VDEV specific events */ 1499 WMI_10X_VDEV_START_RESP_EVENTID, 1500 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1501 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1502 WMI_10X_VDEV_STOPPED_EVENTID, 1503 1504 /* peer specific events */ 1505 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1506 1507 /* beacon/mgmt specific events */ 1508 WMI_10X_HOST_SWBA_EVENTID, 1509 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1510 WMI_10X_MGMT_RX_EVENTID, 1511 1512 /* Channel stats event */ 1513 WMI_10X_CHAN_INFO_EVENTID, 1514 1515 /* PHY Error specific WMI event */ 1516 WMI_10X_PHYERR_EVENTID, 1517 1518 /* Roam event to trigger roaming on host */ 1519 WMI_10X_ROAM_EVENTID, 1520 1521 /* matching AP found from list of profiles */ 1522 WMI_10X_PROFILE_MATCH, 1523 1524 /* debug print message used for tracing FW code while debugging */ 1525 WMI_10X_DEBUG_PRINT_EVENTID, 1526 /* VI spoecific event */ 1527 WMI_10X_PDEV_QVIT_EVENTID, 1528 /* FW code profile data in response to profile request */ 1529 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1530 1531 /*RTT related event ID*/ 1532 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1533 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1534 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1535 1536 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1537 WMI_10X_DCS_INTERFERENCE_EVENTID, 1538 1539 /* TPC config for the current operating channel */ 1540 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1541 1542 WMI_10X_GPIO_INPUT_EVENTID, 1543 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1544 }; 1545 1546 enum wmi_10_2_cmd_id { 1547 WMI_10_2_START_CMDID = 0x9000, 1548 WMI_10_2_END_CMDID = 0x9FFF, 1549 WMI_10_2_INIT_CMDID, 1550 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1551 WMI_10_2_STOP_SCAN_CMDID, 1552 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1553 WMI_10_2_ECHO_CMDID, 1554 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1555 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1556 WMI_10_2_PDEV_SET_PARAM_CMDID, 1557 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1558 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1559 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1560 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1561 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1562 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1563 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1564 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1565 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1566 WMI_10_2_VDEV_CREATE_CMDID, 1567 WMI_10_2_VDEV_DELETE_CMDID, 1568 WMI_10_2_VDEV_START_REQUEST_CMDID, 1569 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1570 WMI_10_2_VDEV_UP_CMDID, 1571 WMI_10_2_VDEV_STOP_CMDID, 1572 WMI_10_2_VDEV_DOWN_CMDID, 1573 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1574 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1575 WMI_10_2_VDEV_SET_PARAM_CMDID, 1576 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1577 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1578 WMI_10_2_PEER_CREATE_CMDID, 1579 WMI_10_2_PEER_DELETE_CMDID, 1580 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1581 WMI_10_2_PEER_SET_PARAM_CMDID, 1582 WMI_10_2_PEER_ASSOC_CMDID, 1583 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1584 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1585 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1586 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1587 WMI_10_2_BCN_TX_CMDID, 1588 WMI_10_2_BCN_PRB_TMPL_CMDID, 1589 WMI_10_2_BCN_FILTER_RX_CMDID, 1590 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1591 WMI_10_2_MGMT_TX_CMDID, 1592 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1593 WMI_10_2_ADDBA_SEND_CMDID, 1594 WMI_10_2_ADDBA_STATUS_CMDID, 1595 WMI_10_2_DELBA_SEND_CMDID, 1596 WMI_10_2_ADDBA_SET_RESP_CMDID, 1597 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1598 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1599 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1600 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1601 WMI_10_2_DBGLOG_CFG_CMDID, 1602 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1603 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1604 WMI_10_2_PDEV_QVIT_CMDID, 1605 WMI_10_2_ROAM_SCAN_MODE, 1606 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1607 WMI_10_2_ROAM_SCAN_PERIOD, 1608 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1609 WMI_10_2_ROAM_AP_PROFILE, 1610 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1611 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1612 WMI_10_2_OFL_SCAN_PERIOD, 1613 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1614 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1615 WMI_10_2_P2P_GO_SET_BEACON_IE, 1616 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1617 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1618 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1619 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1620 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1621 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1622 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1623 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1624 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1625 WMI_10_2_PDEV_SUSPEND_CMDID, 1626 WMI_10_2_PDEV_RESUME_CMDID, 1627 WMI_10_2_ADD_BCN_FILTER_CMDID, 1628 WMI_10_2_RMV_BCN_FILTER_CMDID, 1629 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1630 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1631 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1632 WMI_10_2_WOW_ENABLE_CMDID, 1633 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1634 WMI_10_2_RTT_MEASREQ_CMDID, 1635 WMI_10_2_RTT_TSF_CMDID, 1636 WMI_10_2_RTT_KEEPALIVE_CMDID, 1637 WMI_10_2_PDEV_SEND_BCN_CMDID, 1638 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1639 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1640 WMI_10_2_REQUEST_STATS_CMDID, 1641 WMI_10_2_GPIO_CONFIG_CMDID, 1642 WMI_10_2_GPIO_OUTPUT_CMDID, 1643 WMI_10_2_VDEV_RATEMASK_CMDID, 1644 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1645 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1646 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1647 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1648 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1649 WMI_10_2_FORCE_FW_HANG_CMDID, 1650 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1651 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1652 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1653 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1654 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1655 WMI_10_2_PDEV_GET_INFO, 1656 WMI_10_2_VDEV_GET_INFO, 1657 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1658 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1659 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1660 WMI_10_2_MU_CAL_START_CMDID, 1661 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1662 WMI_10_2_SET_CCA_PARAMS, 1663 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1664 WMI_10_2_FWTEST_CMDID, 1665 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, 1666 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1667 }; 1668 1669 enum wmi_10_2_event_id { 1670 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1671 WMI_10_2_READY_EVENTID, 1672 WMI_10_2_DEBUG_MESG_EVENTID, 1673 WMI_10_2_START_EVENTID = 0x9000, 1674 WMI_10_2_END_EVENTID = 0x9FFF, 1675 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1676 WMI_10_2_ECHO_EVENTID, 1677 WMI_10_2_UPDATE_STATS_EVENTID, 1678 WMI_10_2_INST_RSSI_STATS_EVENTID, 1679 WMI_10_2_VDEV_START_RESP_EVENTID, 1680 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1681 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1682 WMI_10_2_VDEV_STOPPED_EVENTID, 1683 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1684 WMI_10_2_HOST_SWBA_EVENTID, 1685 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1686 WMI_10_2_MGMT_RX_EVENTID, 1687 WMI_10_2_CHAN_INFO_EVENTID, 1688 WMI_10_2_PHYERR_EVENTID, 1689 WMI_10_2_ROAM_EVENTID, 1690 WMI_10_2_PROFILE_MATCH, 1691 WMI_10_2_DEBUG_PRINT_EVENTID, 1692 WMI_10_2_PDEV_QVIT_EVENTID, 1693 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1694 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1695 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1696 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1697 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1698 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1699 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1700 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1701 WMI_10_2_GPIO_INPUT_EVENTID, 1702 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1703 WMI_10_2_GENERIC_BUFFER_EVENTID, 1704 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1705 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1706 WMI_10_2_WDS_PEER_EVENTID, 1707 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1708 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1709 WMI_10_2_MU_REPORT_EVENTID, 1710 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1711 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1712 }; 1713 1714 enum wmi_10_4_cmd_id { 1715 WMI_10_4_START_CMDID = 0x9000, 1716 WMI_10_4_END_CMDID = 0x9FFF, 1717 WMI_10_4_INIT_CMDID, 1718 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1719 WMI_10_4_STOP_SCAN_CMDID, 1720 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1721 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1722 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1723 WMI_10_4_ECHO_CMDID, 1724 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1725 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1726 WMI_10_4_PDEV_SET_PARAM_CMDID, 1727 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1728 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1729 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1730 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1731 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1732 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1733 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1734 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1735 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1736 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1737 WMI_10_4_VDEV_CREATE_CMDID, 1738 WMI_10_4_VDEV_DELETE_CMDID, 1739 WMI_10_4_VDEV_START_REQUEST_CMDID, 1740 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1741 WMI_10_4_VDEV_UP_CMDID, 1742 WMI_10_4_VDEV_STOP_CMDID, 1743 WMI_10_4_VDEV_DOWN_CMDID, 1744 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1745 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1746 WMI_10_4_VDEV_SET_PARAM_CMDID, 1747 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1748 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1749 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1750 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1751 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1752 WMI_10_4_PEER_CREATE_CMDID, 1753 WMI_10_4_PEER_DELETE_CMDID, 1754 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1755 WMI_10_4_PEER_SET_PARAM_CMDID, 1756 WMI_10_4_PEER_ASSOC_CMDID, 1757 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1758 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1759 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1760 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1761 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1762 WMI_10_4_BCN_TX_CMDID, 1763 WMI_10_4_PDEV_SEND_BCN_CMDID, 1764 WMI_10_4_BCN_PRB_TMPL_CMDID, 1765 WMI_10_4_BCN_FILTER_RX_CMDID, 1766 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1767 WMI_10_4_MGMT_TX_CMDID, 1768 WMI_10_4_PRB_TMPL_CMDID, 1769 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1770 WMI_10_4_ADDBA_SEND_CMDID, 1771 WMI_10_4_ADDBA_STATUS_CMDID, 1772 WMI_10_4_DELBA_SEND_CMDID, 1773 WMI_10_4_ADDBA_SET_RESP_CMDID, 1774 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1775 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1776 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1777 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1778 WMI_10_4_DBGLOG_CFG_CMDID, 1779 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1780 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1781 WMI_10_4_PDEV_QVIT_CMDID, 1782 WMI_10_4_ROAM_SCAN_MODE, 1783 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1784 WMI_10_4_ROAM_SCAN_PERIOD, 1785 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1786 WMI_10_4_ROAM_AP_PROFILE, 1787 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1788 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1789 WMI_10_4_OFL_SCAN_PERIOD, 1790 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1791 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1792 WMI_10_4_P2P_GO_SET_BEACON_IE, 1793 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1794 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1795 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1796 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1797 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1798 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1799 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1800 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1801 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1802 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1803 WMI_10_4_PDEV_SUSPEND_CMDID, 1804 WMI_10_4_PDEV_RESUME_CMDID, 1805 WMI_10_4_ADD_BCN_FILTER_CMDID, 1806 WMI_10_4_RMV_BCN_FILTER_CMDID, 1807 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1808 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1809 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1810 WMI_10_4_WOW_ENABLE_CMDID, 1811 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1812 WMI_10_4_RTT_MEASREQ_CMDID, 1813 WMI_10_4_RTT_TSF_CMDID, 1814 WMI_10_4_RTT_KEEPALIVE_CMDID, 1815 WMI_10_4_OEM_REQ_CMDID, 1816 WMI_10_4_NAN_CMDID, 1817 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1818 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1819 WMI_10_4_REQUEST_STATS_CMDID, 1820 WMI_10_4_GPIO_CONFIG_CMDID, 1821 WMI_10_4_GPIO_OUTPUT_CMDID, 1822 WMI_10_4_VDEV_RATEMASK_CMDID, 1823 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1824 WMI_10_4_GTK_OFFLOAD_CMDID, 1825 WMI_10_4_QBOOST_CFG_CMDID, 1826 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1827 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1828 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1829 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1830 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1831 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1832 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1833 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1834 WMI_10_4_FORCE_FW_HANG_CMDID, 1835 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1836 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1837 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1838 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1839 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1840 WMI_10_4_PDEV_FIPS_CMDID, 1841 WMI_10_4_TT_SET_CONF_CMDID, 1842 WMI_10_4_FWTEST_CMDID, 1843 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1844 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1845 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1846 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1847 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1848 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1849 WMI_10_4_PDEV_GET_TPC_CMDID, 1850 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1851 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1852 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1853 WMI_10_4_PDEV_GET_INFO_CMDID, 1854 WMI_10_4_VDEV_GET_INFO_CMDID, 1855 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1856 WMI_10_4_MU_CAL_START_CMDID, 1857 WMI_10_4_SET_CCA_PARAMS_CMDID, 1858 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1859 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1860 WMI_10_4_VDEV_SET_IE_CMDID, 1861 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1862 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1863 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1864 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1865 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1866 WMI_10_4_BTCOEX_CFG_CMDID, 1867 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1868 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1869 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1870 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1871 WMI_10_4_COEX_VERSION_CFG_CMID, 1872 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1873 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1874 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1875 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1876 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1877 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1878 WMI_10_4_GET_TSF_TIMER_CMDID, 1879 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1880 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1881 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1882 WMI_10_4_TDLS_SET_STATE_CMDID, 1883 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1884 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1885 WMI_10_4_PDEV_SEND_FD_CMDID, 1886 WMI_10_4_ENABLE_FILS_CMDID, 1887 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1888 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1889 WMI_10_4_RADAR_FOUND_CMDID, 1890 WMI_10_4_PEER_CFR_CAPTURE_CMDID, 1891 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID, 1892 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1893 }; 1894 1895 enum wmi_10_4_event_id { 1896 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1897 WMI_10_4_READY_EVENTID, 1898 WMI_10_4_DEBUG_MESG_EVENTID, 1899 WMI_10_4_START_EVENTID = 0x9000, 1900 WMI_10_4_END_EVENTID = 0x9FFF, 1901 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1902 WMI_10_4_ECHO_EVENTID, 1903 WMI_10_4_UPDATE_STATS_EVENTID, 1904 WMI_10_4_INST_RSSI_STATS_EVENTID, 1905 WMI_10_4_VDEV_START_RESP_EVENTID, 1906 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1907 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1908 WMI_10_4_VDEV_STOPPED_EVENTID, 1909 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1910 WMI_10_4_HOST_SWBA_EVENTID, 1911 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1912 WMI_10_4_MGMT_RX_EVENTID, 1913 WMI_10_4_CHAN_INFO_EVENTID, 1914 WMI_10_4_PHYERR_EVENTID, 1915 WMI_10_4_ROAM_EVENTID, 1916 WMI_10_4_PROFILE_MATCH, 1917 WMI_10_4_DEBUG_PRINT_EVENTID, 1918 WMI_10_4_PDEV_QVIT_EVENTID, 1919 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1920 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1921 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1922 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1923 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1924 WMI_10_4_OEM_CAPABILITY_EVENTID, 1925 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1926 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1927 WMI_10_4_NAN_EVENTID, 1928 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1929 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1930 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1931 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1932 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1933 WMI_10_4_CSA_HANDLING_EVENTID, 1934 WMI_10_4_GPIO_INPUT_EVENTID, 1935 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1936 WMI_10_4_GENERIC_BUFFER_EVENTID, 1937 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1938 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1939 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1940 WMI_10_4_WDS_PEER_EVENTID, 1941 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1942 WMI_10_4_PDEV_FIPS_EVENTID, 1943 WMI_10_4_TT_STATS_EVENTID, 1944 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1945 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1946 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1947 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1948 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1949 WMI_10_4_PDEV_TPC_EVENTID, 1950 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1951 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1952 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1953 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1954 WMI_10_4_MU_REPORT_EVENTID, 1955 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1956 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1957 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1958 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1959 WMI_10_4_ATF_PEER_STATS_EVENTID, 1960 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1961 WMI_10_4_NAC_RSSI_EVENTID, 1962 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1963 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1964 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1965 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1966 WMI_10_4_TDLS_PEER_EVENTID, 1967 WMI_10_4_HOST_SWFDA_EVENTID, 1968 WMI_10_4_ESP_ESTIMATE_EVENTID, 1969 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1970 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1971 }; 1972 1973 enum wmi_phy_mode { 1974 MODE_11A = 0, /* 11a Mode */ 1975 MODE_11G = 1, /* 11b/g Mode */ 1976 MODE_11B = 2, /* 11b Mode */ 1977 MODE_11GONLY = 3, /* 11g only Mode */ 1978 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1979 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1980 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1981 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1982 MODE_11AC_VHT20 = 8, 1983 MODE_11AC_VHT40 = 9, 1984 MODE_11AC_VHT80 = 10, 1985 /* MODE_11AC_VHT160 = 11, */ 1986 MODE_11AC_VHT20_2G = 11, 1987 MODE_11AC_VHT40_2G = 12, 1988 MODE_11AC_VHT80_2G = 13, 1989 MODE_11AC_VHT80_80 = 14, 1990 MODE_11AC_VHT160 = 15, 1991 MODE_UNKNOWN = 16, 1992 MODE_MAX = 16 1993 }; 1994 ath10k_wmi_phymode_str(enum wmi_phy_mode mode)1995 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1996 { 1997 switch (mode) { 1998 case MODE_11A: 1999 return "11a"; 2000 case MODE_11G: 2001 return "11g"; 2002 case MODE_11B: 2003 return "11b"; 2004 case MODE_11GONLY: 2005 return "11gonly"; 2006 case MODE_11NA_HT20: 2007 return "11na-ht20"; 2008 case MODE_11NG_HT20: 2009 return "11ng-ht20"; 2010 case MODE_11NA_HT40: 2011 return "11na-ht40"; 2012 case MODE_11NG_HT40: 2013 return "11ng-ht40"; 2014 case MODE_11AC_VHT20: 2015 return "11ac-vht20"; 2016 case MODE_11AC_VHT40: 2017 return "11ac-vht40"; 2018 case MODE_11AC_VHT80: 2019 return "11ac-vht80"; 2020 case MODE_11AC_VHT160: 2021 return "11ac-vht160"; 2022 case MODE_11AC_VHT80_80: 2023 return "11ac-vht80+80"; 2024 case MODE_11AC_VHT20_2G: 2025 return "11ac-vht20-2g"; 2026 case MODE_11AC_VHT40_2G: 2027 return "11ac-vht40-2g"; 2028 case MODE_11AC_VHT80_2G: 2029 return "11ac-vht80-2g"; 2030 case MODE_UNKNOWN: 2031 /* skip */ 2032 break; 2033 2034 /* no default handler to allow compiler to check that the 2035 * enum is fully handled 2036 */ 2037 } 2038 2039 return "<unknown>"; 2040 } 2041 2042 #define WMI_CHAN_LIST_TAG 0x1 2043 #define WMI_SSID_LIST_TAG 0x2 2044 #define WMI_BSSID_LIST_TAG 0x3 2045 #define WMI_IE_TAG 0x4 2046 2047 struct wmi_channel { 2048 __le32 mhz; 2049 __le32 band_center_freq1; 2050 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 2051 union { 2052 __le32 flags; /* WMI_CHAN_FLAG_ */ 2053 struct { 2054 u8 mode; /* only 6 LSBs */ 2055 } __packed; 2056 } __packed; 2057 union { 2058 __le32 reginfo0; 2059 struct { 2060 /* note: power unit is 0.5 dBm */ 2061 u8 min_power; 2062 u8 max_power; 2063 u8 reg_power; 2064 u8 reg_classid; 2065 } __packed; 2066 } __packed; 2067 union { 2068 __le32 reginfo1; 2069 struct { 2070 /* note: power unit is 1 dBm */ 2071 u8 antenna_max; 2072 /* note: power unit is 0.5 dBm */ 2073 u8 max_tx_power; 2074 } __packed; 2075 } __packed; 2076 } __packed; 2077 2078 struct wmi_channel_arg { 2079 u32 freq; 2080 u32 band_center_freq1; 2081 u32 band_center_freq2; 2082 bool passive; 2083 bool allow_ibss; 2084 bool allow_ht; 2085 bool allow_vht; 2086 bool ht40plus; 2087 bool chan_radar; 2088 /* note: power unit is 0.5 dBm */ 2089 u32 min_power; 2090 u32 max_power; 2091 u32 max_reg_power; 2092 /* note: power unit is 1 dBm */ 2093 u32 max_antenna_gain; 2094 u32 reg_class_id; 2095 enum wmi_phy_mode mode; 2096 }; 2097 2098 enum wmi_channel_change_cause { 2099 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2100 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2101 }; 2102 2103 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2104 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2105 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2106 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2107 #define WMI_CHAN_FLAG_DFS (1 << 10) 2108 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2109 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2110 2111 /* Indicate reason for channel switch */ 2112 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2113 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/ 2114 #define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15) 2115 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2116 2117 /* HT Capabilities*/ 2118 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2119 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2120 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2121 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2122 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2123 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2124 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2125 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2126 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2127 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2128 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2129 #define WMI_HT_CAP_HT40_SGI 0x0800 2130 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ 2131 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ 2132 2133 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2134 WMI_HT_CAP_HT20_SGI | \ 2135 WMI_HT_CAP_HT40_SGI | \ 2136 WMI_HT_CAP_TX_STBC | \ 2137 WMI_HT_CAP_RX_STBC | \ 2138 WMI_HT_CAP_LDPC) 2139 2140 /* 2141 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2142 * field. The fields not defined here are not supported, or reserved. 2143 * Do not change these masks and if you have to add new one follow the 2144 * bitmask as specified by 802.11ac draft. 2145 */ 2146 2147 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2148 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2149 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2150 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2151 #define WMI_VHT_CAP_TX_STBC 0x00000080 2152 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2153 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2154 #define WMI_VHT_CAP_SU_BFER 0x00000800 2155 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2157 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2159 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2160 #define WMI_VHT_CAP_MU_BFER 0x00080000 2161 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2163 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2164 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2165 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2166 2167 /* The following also refer for max HT AMSDU */ 2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2170 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2171 2172 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2173 WMI_VHT_CAP_RX_LDPC | \ 2174 WMI_VHT_CAP_SGI_80MHZ | \ 2175 WMI_VHT_CAP_TX_STBC | \ 2176 WMI_VHT_CAP_RX_STBC_MASK | \ 2177 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2178 WMI_VHT_CAP_RX_FIXED_ANT | \ 2179 WMI_VHT_CAP_TX_FIXED_ANT) 2180 2181 /* 2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2183 * 802.11ac 2184 */ 2185 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2186 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2187 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2188 2189 enum { 2190 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2191 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2192 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2193 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2194 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2195 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2196 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2197 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2198 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2199 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2200 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2201 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2202 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2203 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2204 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2205 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2206 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2207 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2208 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2209 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2210 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2211 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2212 REGDMN_MODE_ALL = 0xffffffff 2213 }; 2214 2215 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2216 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2217 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2218 2219 /* regulatory capabilities */ 2220 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2225 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2226 2227 struct hal_reg_capabilities { 2228 /* regdomain value specified in EEPROM */ 2229 __le32 eeprom_rd; 2230 /*regdomain */ 2231 __le32 eeprom_rd_ext; 2232 /* CAP1 capabilities bit map. */ 2233 __le32 regcap1; 2234 /* REGDMN EEPROM CAP. */ 2235 __le32 regcap2; 2236 /* REGDMN MODE */ 2237 __le32 wireless_modes; 2238 __le32 low_2ghz_chan; 2239 __le32 high_2ghz_chan; 2240 __le32 low_5ghz_chan; 2241 __le32 high_5ghz_chan; 2242 } __packed; 2243 2244 enum wlan_mode_capability { 2245 WHAL_WLAN_11A_CAPABILITY = 0x1, 2246 WHAL_WLAN_11G_CAPABILITY = 0x2, 2247 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2248 }; 2249 2250 /* structure used by FW for requesting host memory */ 2251 struct wlan_host_mem_req { 2252 /* ID of the request */ 2253 __le32 req_id; 2254 /* size of the of each unit */ 2255 __le32 unit_size; 2256 /* flags to indicate that 2257 * the number units is dependent 2258 * on number of resources(num vdevs num peers .. etc) 2259 */ 2260 __le32 num_unit_info; 2261 /* 2262 * actual number of units to allocate . if flags in the num_unit_info 2263 * indicate that number of units is tied to number of a particular 2264 * resource to allocate then num_units filed is set to 0 and host 2265 * will derive the number units from number of the resources it is 2266 * requesting. 2267 */ 2268 __le32 num_units; 2269 } __packed; 2270 2271 /* 2272 * The following struct holds optional payload for 2273 * wmi_service_ready_event,e.g., 11ac pass some of the 2274 * device capability to the host. 2275 */ 2276 struct wmi_service_ready_event { 2277 __le32 sw_version; 2278 __le32 sw_version_1; 2279 __le32 abi_version; 2280 /* WMI_PHY_CAPABILITY */ 2281 __le32 phy_capability; 2282 /* Maximum number of frag table entries that SW will populate less 1 */ 2283 __le32 max_frag_entry; 2284 __le32 wmi_service_bitmap[16]; 2285 __le32 num_rf_chains; 2286 /* 2287 * The following field is only valid for service type 2288 * WMI_SERVICE_11AC 2289 */ 2290 __le32 ht_cap_info; /* WMI HT Capability */ 2291 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2292 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2293 __le32 hw_min_tx_power; 2294 __le32 hw_max_tx_power; 2295 struct hal_reg_capabilities hal_reg_capabilities; 2296 __le32 sys_cap_info; 2297 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2298 /* 2299 * Max beacon and Probe Response IE offload size 2300 * (includes optional P2P IEs) 2301 */ 2302 __le32 max_bcn_ie_size; 2303 /* 2304 * request to host to allocate a chuck of memory and pss it down to FW 2305 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2306 * data structures. Only valid for low latency interfaces like PCIE 2307 * where FW can access this memory directly (or) by DMA. 2308 */ 2309 __le32 num_mem_reqs; 2310 struct wlan_host_mem_req mem_reqs[]; 2311 } __packed; 2312 2313 /* This is the definition from 10.X firmware branch */ 2314 struct wmi_10x_service_ready_event { 2315 __le32 sw_version; 2316 __le32 abi_version; 2317 2318 /* WMI_PHY_CAPABILITY */ 2319 __le32 phy_capability; 2320 2321 /* Maximum number of frag table entries that SW will populate less 1 */ 2322 __le32 max_frag_entry; 2323 __le32 wmi_service_bitmap[16]; 2324 __le32 num_rf_chains; 2325 2326 /* 2327 * The following field is only valid for service type 2328 * WMI_SERVICE_11AC 2329 */ 2330 __le32 ht_cap_info; /* WMI HT Capability */ 2331 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2332 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2333 __le32 hw_min_tx_power; 2334 __le32 hw_max_tx_power; 2335 2336 struct hal_reg_capabilities hal_reg_capabilities; 2337 2338 __le32 sys_cap_info; 2339 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2340 2341 /* 2342 * request to host to allocate a chuck of memory and pss it down to FW 2343 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2344 * data structures. Only valid for low latency interfaces like PCIE 2345 * where FW can access this memory directly (or) by DMA. 2346 */ 2347 __le32 num_mem_reqs; 2348 2349 struct wlan_host_mem_req mem_reqs[]; 2350 } __packed; 2351 2352 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2353 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2354 2355 struct wmi_ready_event { 2356 __le32 sw_version; 2357 __le32 abi_version; 2358 struct wmi_mac_addr mac_addr; 2359 __le32 status; 2360 } __packed; 2361 2362 struct wmi_resource_config { 2363 /* number of virtual devices (VAPs) to support */ 2364 __le32 num_vdevs; 2365 2366 /* number of peer nodes to support */ 2367 __le32 num_peers; 2368 2369 /* 2370 * In offload mode target supports features like WOW, chatter and 2371 * other protocol offloads. In order to support them some 2372 * functionalities like reorder buffering, PN checking need to be 2373 * done in target. This determines maximum number of peers supported 2374 * by target in offload mode 2375 */ 2376 __le32 num_offload_peers; 2377 2378 /* For target-based RX reordering */ 2379 __le32 num_offload_reorder_bufs; 2380 2381 /* number of keys per peer */ 2382 __le32 num_peer_keys; 2383 2384 /* total number of TX/RX data TIDs */ 2385 __le32 num_tids; 2386 2387 /* 2388 * max skid for resolving hash collisions 2389 * 2390 * The address search table is sparse, so that if two MAC addresses 2391 * result in the same hash value, the second of these conflicting 2392 * entries can slide to the next index in the address search table, 2393 * and use it, if it is unoccupied. This ast_skid_limit parameter 2394 * specifies the upper bound on how many subsequent indices to search 2395 * over to find an unoccupied space. 2396 */ 2397 __le32 ast_skid_limit; 2398 2399 /* 2400 * the nominal chain mask for transmit 2401 * 2402 * The chain mask may be modified dynamically, e.g. to operate AP 2403 * tx with a reduced number of chains if no clients are associated. 2404 * This configuration parameter specifies the nominal chain-mask that 2405 * should be used when not operating with a reduced set of tx chains. 2406 */ 2407 __le32 tx_chain_mask; 2408 2409 /* 2410 * the nominal chain mask for receive 2411 * 2412 * The chain mask may be modified dynamically, e.g. for a client 2413 * to use a reduced number of chains for receive if the traffic to 2414 * the client is low enough that it doesn't require downlink MIMO 2415 * or antenna diversity. 2416 * This configuration parameter specifies the nominal chain-mask that 2417 * should be used when not operating with a reduced set of rx chains. 2418 */ 2419 __le32 rx_chain_mask; 2420 2421 /* 2422 * what rx reorder timeout (ms) to use for the AC 2423 * 2424 * Each WMM access class (voice, video, best-effort, background) will 2425 * have its own timeout value to dictate how long to wait for missing 2426 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2427 * already been received. 2428 * This parameter specifies the timeout in milliseconds for each 2429 * class. 2430 */ 2431 __le32 rx_timeout_pri_vi; 2432 __le32 rx_timeout_pri_vo; 2433 __le32 rx_timeout_pri_be; 2434 __le32 rx_timeout_pri_bk; 2435 2436 /* 2437 * what mode the rx should decap packets to 2438 * 2439 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2440 * THis setting also determines the default TX behavior, however TX 2441 * behavior can be modified on a per VAP basis during VAP init 2442 */ 2443 __le32 rx_decap_mode; 2444 2445 /* what is the maximum number of scan requests that can be queued */ 2446 __le32 scan_max_pending_reqs; 2447 2448 /* maximum VDEV that could use BMISS offload */ 2449 __le32 bmiss_offload_max_vdev; 2450 2451 /* maximum VDEV that could use offload roaming */ 2452 __le32 roam_offload_max_vdev; 2453 2454 /* maximum AP profiles that would push to offload roaming */ 2455 __le32 roam_offload_max_ap_profiles; 2456 2457 /* 2458 * how many groups to use for mcast->ucast conversion 2459 * 2460 * The target's WAL maintains a table to hold information regarding 2461 * which peers belong to a given multicast group, so that if 2462 * multicast->unicast conversion is enabled, the target can convert 2463 * multicast tx frames to a series of unicast tx frames, to each 2464 * peer within the multicast group. 2465 This num_mcast_groups configuration parameter tells the target how 2466 * many multicast groups to provide storage for within its multicast 2467 * group membership table. 2468 */ 2469 __le32 num_mcast_groups; 2470 2471 /* 2472 * size to alloc for the mcast membership table 2473 * 2474 * This num_mcast_table_elems configuration parameter tells the 2475 * target how many peer elements it needs to provide storage for in 2476 * its multicast group membership table. 2477 * These multicast group membership table elements are shared by the 2478 * multicast groups stored within the table. 2479 */ 2480 __le32 num_mcast_table_elems; 2481 2482 /* 2483 * whether/how to do multicast->unicast conversion 2484 * 2485 * This configuration parameter specifies whether the target should 2486 * perform multicast --> unicast conversion on transmit, and if so, 2487 * what to do if it finds no entries in its multicast group 2488 * membership table for the multicast IP address in the tx frame. 2489 * Configuration value: 2490 * 0 -> Do not perform multicast to unicast conversion. 2491 * 1 -> Convert multicast frames to unicast, if the IP multicast 2492 * address from the tx frame is found in the multicast group 2493 * membership table. If the IP multicast address is not found, 2494 * drop the frame. 2495 * 2 -> Convert multicast frames to unicast, if the IP multicast 2496 * address from the tx frame is found in the multicast group 2497 * membership table. If the IP multicast address is not found, 2498 * transmit the frame as multicast. 2499 */ 2500 __le32 mcast2ucast_mode; 2501 2502 /* 2503 * how much memory to allocate for a tx PPDU dbg log 2504 * 2505 * This parameter controls how much memory the target will allocate 2506 * to store a log of tx PPDU meta-information (how large the PPDU 2507 * was, when it was sent, whether it was successful, etc.) 2508 */ 2509 __le32 tx_dbg_log_size; 2510 2511 /* how many AST entries to be allocated for WDS */ 2512 __le32 num_wds_entries; 2513 2514 /* 2515 * MAC DMA burst size, e.g., For target PCI limit can be 2516 * 0 -default, 1 256B 2517 */ 2518 __le32 dma_burst_size; 2519 2520 /* 2521 * Fixed delimiters to be inserted after every MPDU to 2522 * account for interface latency to avoid underrun. 2523 */ 2524 __le32 mac_aggr_delim; 2525 2526 /* 2527 * determine whether target is responsible for detecting duplicate 2528 * non-aggregate MPDU and timing out stale fragments. 2529 * 2530 * A-MPDU reordering is always performed on the target. 2531 * 2532 * 0: target responsible for frag timeout and dup checking 2533 * 1: host responsible for frag timeout and dup checking 2534 */ 2535 __le32 rx_skip_defrag_timeout_dup_detection_check; 2536 2537 /* 2538 * Configuration for VoW : 2539 * No of Video Nodes to be supported 2540 * and Max no of descriptors for each Video link (node). 2541 */ 2542 __le32 vow_config; 2543 2544 /* maximum VDEV that could use GTK offload */ 2545 __le32 gtk_offload_max_vdev; 2546 2547 /* Number of msdu descriptors target should use */ 2548 __le32 num_msdu_desc; 2549 2550 /* 2551 * Max. number of Tx fragments per MSDU 2552 * This parameter controls the max number of Tx fragments per MSDU. 2553 * This is sent by the target as part of the WMI_SERVICE_READY event 2554 * and is overridden by the OS shim as required. 2555 */ 2556 __le32 max_frag_entries; 2557 } __packed; 2558 2559 struct wmi_resource_config_10x { 2560 /* number of virtual devices (VAPs) to support */ 2561 __le32 num_vdevs; 2562 2563 /* number of peer nodes to support */ 2564 __le32 num_peers; 2565 2566 /* number of keys per peer */ 2567 __le32 num_peer_keys; 2568 2569 /* total number of TX/RX data TIDs */ 2570 __le32 num_tids; 2571 2572 /* 2573 * max skid for resolving hash collisions 2574 * 2575 * The address search table is sparse, so that if two MAC addresses 2576 * result in the same hash value, the second of these conflicting 2577 * entries can slide to the next index in the address search table, 2578 * and use it, if it is unoccupied. This ast_skid_limit parameter 2579 * specifies the upper bound on how many subsequent indices to search 2580 * over to find an unoccupied space. 2581 */ 2582 __le32 ast_skid_limit; 2583 2584 /* 2585 * the nominal chain mask for transmit 2586 * 2587 * The chain mask may be modified dynamically, e.g. to operate AP 2588 * tx with a reduced number of chains if no clients are associated. 2589 * This configuration parameter specifies the nominal chain-mask that 2590 * should be used when not operating with a reduced set of tx chains. 2591 */ 2592 __le32 tx_chain_mask; 2593 2594 /* 2595 * the nominal chain mask for receive 2596 * 2597 * The chain mask may be modified dynamically, e.g. for a client 2598 * to use a reduced number of chains for receive if the traffic to 2599 * the client is low enough that it doesn't require downlink MIMO 2600 * or antenna diversity. 2601 * This configuration parameter specifies the nominal chain-mask that 2602 * should be used when not operating with a reduced set of rx chains. 2603 */ 2604 __le32 rx_chain_mask; 2605 2606 /* 2607 * what rx reorder timeout (ms) to use for the AC 2608 * 2609 * Each WMM access class (voice, video, best-effort, background) will 2610 * have its own timeout value to dictate how long to wait for missing 2611 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2612 * already been received. 2613 * This parameter specifies the timeout in milliseconds for each 2614 * class. 2615 */ 2616 __le32 rx_timeout_pri_vi; 2617 __le32 rx_timeout_pri_vo; 2618 __le32 rx_timeout_pri_be; 2619 __le32 rx_timeout_pri_bk; 2620 2621 /* 2622 * what mode the rx should decap packets to 2623 * 2624 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2625 * THis setting also determines the default TX behavior, however TX 2626 * behavior can be modified on a per VAP basis during VAP init 2627 */ 2628 __le32 rx_decap_mode; 2629 2630 /* what is the maximum number of scan requests that can be queued */ 2631 __le32 scan_max_pending_reqs; 2632 2633 /* maximum VDEV that could use BMISS offload */ 2634 __le32 bmiss_offload_max_vdev; 2635 2636 /* maximum VDEV that could use offload roaming */ 2637 __le32 roam_offload_max_vdev; 2638 2639 /* maximum AP profiles that would push to offload roaming */ 2640 __le32 roam_offload_max_ap_profiles; 2641 2642 /* 2643 * how many groups to use for mcast->ucast conversion 2644 * 2645 * The target's WAL maintains a table to hold information regarding 2646 * which peers belong to a given multicast group, so that if 2647 * multicast->unicast conversion is enabled, the target can convert 2648 * multicast tx frames to a series of unicast tx frames, to each 2649 * peer within the multicast group. 2650 This num_mcast_groups configuration parameter tells the target how 2651 * many multicast groups to provide storage for within its multicast 2652 * group membership table. 2653 */ 2654 __le32 num_mcast_groups; 2655 2656 /* 2657 * size to alloc for the mcast membership table 2658 * 2659 * This num_mcast_table_elems configuration parameter tells the 2660 * target how many peer elements it needs to provide storage for in 2661 * its multicast group membership table. 2662 * These multicast group membership table elements are shared by the 2663 * multicast groups stored within the table. 2664 */ 2665 __le32 num_mcast_table_elems; 2666 2667 /* 2668 * whether/how to do multicast->unicast conversion 2669 * 2670 * This configuration parameter specifies whether the target should 2671 * perform multicast --> unicast conversion on transmit, and if so, 2672 * what to do if it finds no entries in its multicast group 2673 * membership table for the multicast IP address in the tx frame. 2674 * Configuration value: 2675 * 0 -> Do not perform multicast to unicast conversion. 2676 * 1 -> Convert multicast frames to unicast, if the IP multicast 2677 * address from the tx frame is found in the multicast group 2678 * membership table. If the IP multicast address is not found, 2679 * drop the frame. 2680 * 2 -> Convert multicast frames to unicast, if the IP multicast 2681 * address from the tx frame is found in the multicast group 2682 * membership table. If the IP multicast address is not found, 2683 * transmit the frame as multicast. 2684 */ 2685 __le32 mcast2ucast_mode; 2686 2687 /* 2688 * how much memory to allocate for a tx PPDU dbg log 2689 * 2690 * This parameter controls how much memory the target will allocate 2691 * to store a log of tx PPDU meta-information (how large the PPDU 2692 * was, when it was sent, whether it was successful, etc.) 2693 */ 2694 __le32 tx_dbg_log_size; 2695 2696 /* how many AST entries to be allocated for WDS */ 2697 __le32 num_wds_entries; 2698 2699 /* 2700 * MAC DMA burst size, e.g., For target PCI limit can be 2701 * 0 -default, 1 256B 2702 */ 2703 __le32 dma_burst_size; 2704 2705 /* 2706 * Fixed delimiters to be inserted after every MPDU to 2707 * account for interface latency to avoid underrun. 2708 */ 2709 __le32 mac_aggr_delim; 2710 2711 /* 2712 * determine whether target is responsible for detecting duplicate 2713 * non-aggregate MPDU and timing out stale fragments. 2714 * 2715 * A-MPDU reordering is always performed on the target. 2716 * 2717 * 0: target responsible for frag timeout and dup checking 2718 * 1: host responsible for frag timeout and dup checking 2719 */ 2720 __le32 rx_skip_defrag_timeout_dup_detection_check; 2721 2722 /* 2723 * Configuration for VoW : 2724 * No of Video Nodes to be supported 2725 * and Max no of descriptors for each Video link (node). 2726 */ 2727 __le32 vow_config; 2728 2729 /* Number of msdu descriptors target should use */ 2730 __le32 num_msdu_desc; 2731 2732 /* 2733 * Max. number of Tx fragments per MSDU 2734 * This parameter controls the max number of Tx fragments per MSDU. 2735 * This is sent by the target as part of the WMI_SERVICE_READY event 2736 * and is overridden by the OS shim as required. 2737 */ 2738 __le32 max_frag_entries; 2739 } __packed; 2740 2741 enum wmi_10_2_feature_mask { 2742 WMI_10_2_RX_BATCH_MODE = BIT(0), 2743 WMI_10_2_ATF_CONFIG = BIT(1), 2744 WMI_10_2_COEX_GPIO = BIT(3), 2745 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2746 WMI_10_2_PEER_STATS = BIT(7), 2747 }; 2748 2749 struct wmi_resource_config_10_2 { 2750 struct wmi_resource_config_10x common; 2751 __le32 max_peer_ext_stats; 2752 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2753 __le32 bk_min_free; 2754 __le32 be_min_free; 2755 __le32 vi_min_free; 2756 __le32 vo_min_free; 2757 __le32 feature_mask; 2758 } __packed; 2759 2760 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2761 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2762 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2763 2764 struct wmi_resource_config_10_4 { 2765 /* Number of virtual devices (VAPs) to support */ 2766 __le32 num_vdevs; 2767 2768 /* Number of peer nodes to support */ 2769 __le32 num_peers; 2770 2771 /* Number of active peer nodes to support */ 2772 __le32 num_active_peers; 2773 2774 /* In offload mode, target supports features like WOW, chatter and other 2775 * protocol offloads. In order to support them some functionalities like 2776 * reorder buffering, PN checking need to be done in target. 2777 * This determines maximum number of peers supported by target in 2778 * offload mode. 2779 */ 2780 __le32 num_offload_peers; 2781 2782 /* Number of reorder buffers available for doing target based reorder 2783 * Rx reorder buffering 2784 */ 2785 __le32 num_offload_reorder_buffs; 2786 2787 /* Number of keys per peer */ 2788 __le32 num_peer_keys; 2789 2790 /* Total number of TX/RX data TIDs */ 2791 __le32 num_tids; 2792 2793 /* Max skid for resolving hash collisions. 2794 * The address search table is sparse, so that if two MAC addresses 2795 * result in the same hash value, the second of these conflicting 2796 * entries can slide to the next index in the address search table, 2797 * and use it, if it is unoccupied. This ast_skid_limit parameter 2798 * specifies the upper bound on how many subsequent indices to search 2799 * over to find an unoccupied space. 2800 */ 2801 __le32 ast_skid_limit; 2802 2803 /* The nominal chain mask for transmit. 2804 * The chain mask may be modified dynamically, e.g. to operate AP tx 2805 * with a reduced number of chains if no clients are associated. 2806 * This configuration parameter specifies the nominal chain-mask that 2807 * should be used when not operating with a reduced set of tx chains. 2808 */ 2809 __le32 tx_chain_mask; 2810 2811 /* The nominal chain mask for receive. 2812 * The chain mask may be modified dynamically, e.g. for a client to use 2813 * a reduced number of chains for receive if the traffic to the client 2814 * is low enough that it doesn't require downlink MIMO or antenna 2815 * diversity. This configuration parameter specifies the nominal 2816 * chain-mask that should be used when not operating with a reduced 2817 * set of rx chains. 2818 */ 2819 __le32 rx_chain_mask; 2820 2821 /* What rx reorder timeout (ms) to use for the AC. 2822 * Each WMM access class (voice, video, best-effort, background) will 2823 * have its own timeout value to dictate how long to wait for missing 2824 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2825 * been received. This parameter specifies the timeout in milliseconds 2826 * for each class. 2827 */ 2828 __le32 rx_timeout_pri[4]; 2829 2830 /* What mode the rx should decap packets to. 2831 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2832 * This setting also determines the default TX behavior, however TX 2833 * behavior can be modified on a per VAP basis during VAP init 2834 */ 2835 __le32 rx_decap_mode; 2836 2837 __le32 scan_max_pending_req; 2838 2839 __le32 bmiss_offload_max_vdev; 2840 2841 __le32 roam_offload_max_vdev; 2842 2843 __le32 roam_offload_max_ap_profiles; 2844 2845 /* How many groups to use for mcast->ucast conversion. 2846 * The target's WAL maintains a table to hold information regarding 2847 * which peers belong to a given multicast group, so that if 2848 * multicast->unicast conversion is enabled, the target can convert 2849 * multicast tx frames to a series of unicast tx frames, to each peer 2850 * within the multicast group. This num_mcast_groups configuration 2851 * parameter tells the target how many multicast groups to provide 2852 * storage for within its multicast group membership table. 2853 */ 2854 __le32 num_mcast_groups; 2855 2856 /* Size to alloc for the mcast membership table. 2857 * This num_mcast_table_elems configuration parameter tells the target 2858 * how many peer elements it needs to provide storage for in its 2859 * multicast group membership table. These multicast group membership 2860 * table elements are shared by the multicast groups stored within 2861 * the table. 2862 */ 2863 __le32 num_mcast_table_elems; 2864 2865 /* Whether/how to do multicast->unicast conversion. 2866 * This configuration parameter specifies whether the target should 2867 * perform multicast --> unicast conversion on transmit, and if so, 2868 * what to do if it finds no entries in its multicast group membership 2869 * table for the multicast IP address in the tx frame. 2870 * Configuration value: 2871 * 0 -> Do not perform multicast to unicast conversion. 2872 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2873 * from the tx frame is found in the multicast group membership 2874 * table. If the IP multicast address is not found, drop the frame 2875 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2876 * from the tx frame is found in the multicast group membership 2877 * table. If the IP multicast address is not found, transmit the 2878 * frame as multicast. 2879 */ 2880 __le32 mcast2ucast_mode; 2881 2882 /* How much memory to allocate for a tx PPDU dbg log. 2883 * This parameter controls how much memory the target will allocate to 2884 * store a log of tx PPDU meta-information (how large the PPDU was, 2885 * when it was sent, whether it was successful, etc.) 2886 */ 2887 __le32 tx_dbg_log_size; 2888 2889 /* How many AST entries to be allocated for WDS */ 2890 __le32 num_wds_entries; 2891 2892 /* MAC DMA burst size. 0 -default, 1 -256B */ 2893 __le32 dma_burst_size; 2894 2895 /* Fixed delimiters to be inserted after every MPDU to account for 2896 * interface latency to avoid underrun. 2897 */ 2898 __le32 mac_aggr_delim; 2899 2900 /* Determine whether target is responsible for detecting duplicate 2901 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2902 * is always performed on the target. 2903 * 2904 * 0: target responsible for frag timeout and dup checking 2905 * 1: host responsible for frag timeout and dup checking 2906 */ 2907 __le32 rx_skip_defrag_timeout_dup_detection_check; 2908 2909 /* Configuration for VoW : No of Video nodes to be supported and max 2910 * no of descriptors for each video link (node). 2911 */ 2912 __le32 vow_config; 2913 2914 /* Maximum vdev that could use gtk offload */ 2915 __le32 gtk_offload_max_vdev; 2916 2917 /* Number of msdu descriptors target should use */ 2918 __le32 num_msdu_desc; 2919 2920 /* Max number of tx fragments per MSDU. 2921 * This parameter controls the max number of tx fragments per MSDU. 2922 * This will passed by target as part of the WMI_SERVICE_READY event 2923 * and is overridden by the OS shim as required. 2924 */ 2925 __le32 max_frag_entries; 2926 2927 /* Max number of extended peer stats. 2928 * This parameter controls the max number of peers for which extended 2929 * statistics are supported by target 2930 */ 2931 __le32 max_peer_ext_stats; 2932 2933 /* Smart antenna capabilities information. 2934 * 1 - Smart antenna is enabled 2935 * 0 - Smart antenna is disabled 2936 * In future this can contain smart antenna specific capabilities. 2937 */ 2938 __le32 smart_ant_cap; 2939 2940 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2941 * during init. 2942 */ 2943 __le32 bk_minfree; 2944 __le32 be_minfree; 2945 __le32 vi_minfree; 2946 __le32 vo_minfree; 2947 2948 /* Rx batch mode capability. 2949 * 1 - Rx batch mode enabled 2950 * 0 - Rx batch mode disabled 2951 */ 2952 __le32 rx_batchmode; 2953 2954 /* Thermal throttling capability. 2955 * 1 - Capable of thermal throttling 2956 * 0 - Not capable of thermal throttling 2957 */ 2958 __le32 tt_support; 2959 2960 /* ATF configuration. 2961 * 1 - Enable ATF 2962 * 0 - Disable ATF 2963 */ 2964 __le32 atf_config; 2965 2966 /* Configure padding to manage IP header un-alignment 2967 * 1 - Enable padding 2968 * 0 - Disable padding 2969 */ 2970 __le32 iphdr_pad_config; 2971 2972 /* qwrap configuration (bits 15-0) 2973 * 1 - This is qwrap configuration 2974 * 0 - This is not qwrap 2975 * 2976 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2977 * In order to get ack-RSSI reporting and to specify the tx-rate for 2978 * individual frames, this option must be enabled. This uses an extra 2979 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2980 */ 2981 __le32 qwrap_config; 2982 } __packed; 2983 2984 enum wmi_coex_version { 2985 WMI_NO_COEX_VERSION_SUPPORT = 0, 2986 /* 3 wire coex support*/ 2987 WMI_COEX_VERSION_1 = 1, 2988 /* 2.5 wire coex support*/ 2989 WMI_COEX_VERSION_2 = 2, 2990 /* 2.5 wire coex with duty cycle support */ 2991 WMI_COEX_VERSION_3 = 3, 2992 /* 4 wire coex support*/ 2993 WMI_COEX_VERSION_4 = 4, 2994 }; 2995 2996 /** 2997 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2998 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2999 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 3000 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 3001 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 3002 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 3003 * @WMI_10_4_PEER_STATS: Per station stats 3004 * @WMI_10_4_VDEV_STATS: Per vdev stats 3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 3006 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 3007 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 3008 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 3010 * enable/disable 3011 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable 3012 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 3013 * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT: Firmware supports Extended Peer 3014 * TID configuration for QoS related settings 3015 * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting 3016 */ 3017 enum wmi_10_4_feature_mask { 3018 WMI_10_4_LTEU_SUPPORT = BIT(0), 3019 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 3020 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 3021 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 3022 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 3023 WMI_10_4_PEER_STATS = BIT(5), 3024 WMI_10_4_VDEV_STATS = BIT(6), 3025 WMI_10_4_TDLS = BIT(7), 3026 WMI_10_4_TDLS_OFFCHAN = BIT(8), 3027 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 3028 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 3029 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 3030 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 3031 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 3032 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), 3033 WMI_10_4_REPORT_AIRTIME = BIT(18), 3034 3035 }; 3036 3037 /* WMI_GPIO_CONFIG_CMDID */ 3038 enum { 3039 WMI_GPIO_PULL_NONE, 3040 WMI_GPIO_PULL_UP, 3041 WMI_GPIO_PULL_DOWN, 3042 }; 3043 3044 enum { 3045 WMI_GPIO_INTTYPE_DISABLE, 3046 WMI_GPIO_INTTYPE_RISING_EDGE, 3047 WMI_GPIO_INTTYPE_FALLING_EDGE, 3048 WMI_GPIO_INTTYPE_BOTH_EDGE, 3049 WMI_GPIO_INTTYPE_LEVEL_LOW, 3050 WMI_GPIO_INTTYPE_LEVEL_HIGH 3051 }; 3052 3053 /* WMI_GPIO_CONFIG_CMDID */ 3054 struct wmi_gpio_config_cmd { 3055 __le32 gpio_num; /* GPIO number to be setup */ 3056 __le32 input; /* 0 - Output/ 1 - Input */ 3057 __le32 pull_type; /* Pull type defined above */ 3058 __le32 intr_mode; /* Interrupt mode defined above (Input) */ 3059 } __packed; 3060 3061 /* WMI_GPIO_OUTPUT_CMDID */ 3062 struct wmi_gpio_output_cmd { 3063 __le32 gpio_num; /* GPIO number to be setup */ 3064 __le32 set; /* Set the GPIO pin*/ 3065 } __packed; 3066 3067 /* WMI_GPIO_INPUT_EVENTID */ 3068 struct wmi_gpio_input_event { 3069 __le32 gpio_num; /* GPIO number which changed state */ 3070 } __packed; 3071 3072 struct wmi_ext_resource_config_10_4_cmd { 3073 /* contains enum wmi_host_platform_type */ 3074 __le32 host_platform_config; 3075 /* see enum wmi_10_4_feature_mask */ 3076 __le32 fw_feature_bitmap; 3077 /* WLAN priority GPIO number */ 3078 __le32 wlan_gpio_priority; 3079 /* see enum wmi_coex_version */ 3080 __le32 coex_version; 3081 /* COEX GPIO config */ 3082 __le32 coex_gpio_pin1; 3083 __le32 coex_gpio_pin2; 3084 __le32 coex_gpio_pin3; 3085 /* number of vdevs allowed to perform tdls */ 3086 __le32 num_tdls_vdevs; 3087 /* number of peers to track per TDLS vdev */ 3088 __le32 num_tdls_conn_table_entries; 3089 /* number of tdls sleep sta supported */ 3090 __le32 max_tdls_concurrent_sleep_sta; 3091 /* number of tdls buffer sta supported */ 3092 __le32 max_tdls_concurrent_buffer_sta; 3093 }; 3094 3095 /* structure describing host memory chunk. */ 3096 struct host_memory_chunk { 3097 /* id of the request that is passed up in service ready */ 3098 __le32 req_id; 3099 /* the physical address the memory chunk */ 3100 __le32 ptr; 3101 /* size of the chunk */ 3102 __le32 size; 3103 } __packed; 3104 3105 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8 3106 3107 struct wmi_host_mem_chunks { 3108 __le32 count; 3109 /* some fw revisions require at least 1 chunk regardless of count */ 3110 union { 3111 struct host_memory_chunk item; 3112 DECLARE_FLEX_ARRAY(struct host_memory_chunk, items); 3113 }; 3114 } __packed; 3115 3116 struct wmi_init_cmd { 3117 struct wmi_resource_config resource_config; 3118 struct wmi_host_mem_chunks mem_chunks; 3119 } __packed; 3120 3121 /* _10x structure is from 10.X FW API */ 3122 struct wmi_init_cmd_10x { 3123 struct wmi_resource_config_10x resource_config; 3124 struct wmi_host_mem_chunks mem_chunks; 3125 } __packed; 3126 3127 struct wmi_init_cmd_10_2 { 3128 struct wmi_resource_config_10_2 resource_config; 3129 struct wmi_host_mem_chunks mem_chunks; 3130 } __packed; 3131 3132 struct wmi_init_cmd_10_4 { 3133 struct wmi_resource_config_10_4 resource_config; 3134 struct wmi_host_mem_chunks mem_chunks; 3135 } __packed; 3136 3137 struct wmi_chan_list_entry { 3138 __le16 freq; 3139 u8 phy_mode; /* valid for 10.2 only */ 3140 u8 reserved; 3141 } __packed; 3142 3143 /* TLV for channel list */ 3144 struct wmi_chan_list { 3145 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3146 __le32 num_chan; 3147 struct wmi_chan_list_entry channel_list[]; 3148 } __packed; 3149 3150 struct wmi_bssid_list { 3151 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3152 __le32 num_bssid; 3153 struct wmi_mac_addr bssid_list[]; 3154 } __packed; 3155 3156 struct wmi_ie_data { 3157 __le32 tag; /* WMI_IE_TAG */ 3158 __le32 ie_len; 3159 u8 ie_data[]; 3160 } __packed; 3161 3162 struct wmi_ssid { 3163 __le32 ssid_len; 3164 u8 ssid[32]; 3165 } __packed; 3166 3167 struct wmi_ssid_list { 3168 __le32 tag; /* WMI_SSID_LIST_TAG */ 3169 __le32 num_ssids; 3170 struct wmi_ssid ssids[]; 3171 } __packed; 3172 3173 /* prefix used by scan requestor ids on the host */ 3174 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3175 3176 /* prefix used by scan request ids generated on the host */ 3177 /* host cycles through the lower 12 bits to generate ids */ 3178 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3179 3180 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3181 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3182 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3183 3184 /* Values lower than this may be refused by some firmware revisions with a scan 3185 * completion with a timedout reason. 3186 */ 3187 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3188 3189 /* Scan priority numbers must be sequential, starting with 0 */ 3190 enum wmi_scan_priority { 3191 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3192 WMI_SCAN_PRIORITY_LOW, 3193 WMI_SCAN_PRIORITY_MEDIUM, 3194 WMI_SCAN_PRIORITY_HIGH, 3195 WMI_SCAN_PRIORITY_VERY_HIGH, 3196 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3197 }; 3198 3199 struct wmi_start_scan_common { 3200 /* Scan ID */ 3201 __le32 scan_id; 3202 /* Scan requestor ID */ 3203 __le32 scan_req_id; 3204 /* VDEV id(interface) that is requesting scan */ 3205 __le32 vdev_id; 3206 /* Scan Priority, input to scan scheduler */ 3207 __le32 scan_priority; 3208 /* Scan events subscription */ 3209 __le32 notify_scan_events; 3210 /* dwell time in msec on active channels */ 3211 __le32 dwell_time_active; 3212 /* dwell time in msec on passive channels */ 3213 __le32 dwell_time_passive; 3214 /* 3215 * min time in msec on the BSS channel,only valid if at least one 3216 * VDEV is active 3217 */ 3218 __le32 min_rest_time; 3219 /* 3220 * max rest time in msec on the BSS channel,only valid if at least 3221 * one VDEV is active 3222 */ 3223 /* 3224 * the scanner will rest on the bss channel at least min_rest_time 3225 * after min_rest_time the scanner will start checking for tx/rx 3226 * activity on all VDEVs. if there is no activity the scanner will 3227 * switch to off channel. if there is activity the scanner will let 3228 * the radio on the bss channel until max_rest_time expires.at 3229 * max_rest_time scanner will switch to off channel irrespective of 3230 * activity. activity is determined by the idle_time parameter. 3231 */ 3232 __le32 max_rest_time; 3233 /* 3234 * time before sending next set of probe requests. 3235 * The scanner keeps repeating probe requests transmission with 3236 * period specified by repeat_probe_time. 3237 * The number of probe requests specified depends on the ssid_list 3238 * and bssid_list 3239 */ 3240 __le32 repeat_probe_time; 3241 /* time in msec between 2 consecutive probe requests with in a set. */ 3242 __le32 probe_spacing_time; 3243 /* 3244 * data inactivity time in msec on bss channel that will be used by 3245 * scanner for measuring the inactivity. 3246 */ 3247 __le32 idle_time; 3248 /* maximum time in msec allowed for scan */ 3249 __le32 max_scan_time; 3250 /* 3251 * delay in msec before sending first probe request after switching 3252 * to a channel 3253 */ 3254 __le32 probe_delay; 3255 /* Scan control flags */ 3256 __le32 scan_ctrl_flags; 3257 } __packed; 3258 3259 struct wmi_start_scan_cmd { 3260 struct wmi_start_scan_common common; 3261 __le32 burst_duration_ms; 3262 u8 tlvs[]; 3263 } __packed; 3264 3265 /* This is the definition from 10.X firmware branch */ 3266 struct wmi_10x_start_scan_cmd { 3267 struct wmi_start_scan_common common; 3268 u8 tlvs[]; 3269 } __packed; 3270 3271 struct wmi_ssid_arg { 3272 int len; 3273 const u8 *ssid; 3274 }; 3275 3276 struct wmi_bssid_arg { 3277 const u8 *bssid; 3278 }; 3279 3280 struct wmi_start_scan_arg { 3281 u32 scan_id; 3282 u32 scan_req_id; 3283 u32 vdev_id; 3284 u32 scan_priority; 3285 u32 notify_scan_events; 3286 u32 dwell_time_active; 3287 u32 dwell_time_passive; 3288 u32 min_rest_time; 3289 u32 max_rest_time; 3290 u32 repeat_probe_time; 3291 u32 probe_spacing_time; 3292 u32 idle_time; 3293 u32 max_scan_time; 3294 u32 probe_delay; 3295 u32 scan_ctrl_flags; 3296 u32 burst_duration_ms; 3297 3298 u32 ie_len; 3299 u32 n_channels; 3300 u32 n_ssids; 3301 u32 n_bssids; 3302 3303 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3304 u16 channels[64]; 3305 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3306 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3307 struct wmi_mac_addr mac_addr; 3308 struct wmi_mac_addr mac_mask; 3309 }; 3310 3311 /* scan control flags */ 3312 3313 /* passively scan all channels including active channels */ 3314 #define WMI_SCAN_FLAG_PASSIVE 0x1 3315 /* add wild card ssid probe request even though ssid_list is specified. */ 3316 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3317 /* add cck rates to rates/xrate ie for the generated probe request */ 3318 #define WMI_SCAN_ADD_CCK_RATES 0x4 3319 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3320 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3321 /* To enable indication of Chan load and Noise floor to host */ 3322 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3323 /* Filter Probe request frames */ 3324 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3325 /* When set, DFS channels will not be scanned */ 3326 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3327 /* Different FW scan engine may choose to bail out on errors. 3328 * Allow the driver to have influence over that. 3329 */ 3330 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3331 3332 /* Use random MAC address for TA for Probe Request frame and add 3333 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3334 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3335 */ 3336 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3337 3338 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3339 #define WMI_SCAN_CLASS_MASK 0xFF000000 3340 3341 enum wmi_stop_scan_type { 3342 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3343 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3344 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3345 }; 3346 3347 struct wmi_stop_scan_cmd { 3348 __le32 scan_req_id; 3349 __le32 scan_id; 3350 __le32 req_type; 3351 __le32 vdev_id; 3352 } __packed; 3353 3354 struct wmi_stop_scan_arg { 3355 u32 req_id; 3356 enum wmi_stop_scan_type req_type; 3357 union { 3358 u32 scan_id; 3359 u32 vdev_id; 3360 } u; 3361 }; 3362 3363 struct wmi_scan_chan_list_cmd { 3364 __le32 num_scan_chans; 3365 struct wmi_channel chan_info[]; 3366 } __packed; 3367 3368 struct wmi_scan_chan_list_arg { 3369 u32 n_channels; 3370 struct wmi_channel_arg *channels; 3371 }; 3372 3373 enum wmi_bss_filter { 3374 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3375 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3376 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3377 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3378 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3379 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3380 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3381 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3382 }; 3383 3384 enum wmi_scan_event_type { 3385 WMI_SCAN_EVENT_STARTED = BIT(0), 3386 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3387 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3388 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3389 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3390 /* possibly by high-prio scan */ 3391 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3392 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3393 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3394 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3395 WMI_SCAN_EVENT_MAX = BIT(15), 3396 }; 3397 3398 enum wmi_scan_completion_reason { 3399 WMI_SCAN_REASON_COMPLETED, 3400 WMI_SCAN_REASON_CANCELLED, 3401 WMI_SCAN_REASON_PREEMPTED, 3402 WMI_SCAN_REASON_TIMEDOUT, 3403 WMI_SCAN_REASON_INTERNAL_FAILURE, 3404 WMI_SCAN_REASON_MAX, 3405 }; 3406 3407 struct wmi_scan_event { 3408 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3409 __le32 reason; /* %WMI_SCAN_REASON_ */ 3410 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3411 __le32 scan_req_id; 3412 __le32 scan_id; 3413 __le32 vdev_id; 3414 } __packed; 3415 3416 /* 3417 * This defines how much headroom is kept in the 3418 * receive frame between the descriptor and the 3419 * payload, in order for the WMI PHY error and 3420 * management handler to insert header contents. 3421 * 3422 * This is in bytes. 3423 */ 3424 #define WMI_MGMT_RX_HDR_HEADROOM 52 3425 3426 /* 3427 * This event will be used for sending scan results 3428 * as well as rx mgmt frames to the host. The rx buffer 3429 * will be sent as part of this WMI event. It would be a 3430 * good idea to pass all the fields in the RX status 3431 * descriptor up to the host. 3432 */ 3433 struct wmi_mgmt_rx_hdr_v1 { 3434 __le32 channel; 3435 __le32 snr; 3436 __le32 rate; 3437 __le32 phy_mode; 3438 __le32 buf_len; 3439 __le32 status; /* %WMI_RX_STATUS_ */ 3440 } __packed; 3441 3442 struct wmi_mgmt_rx_hdr_v2 { 3443 struct wmi_mgmt_rx_hdr_v1 v1; 3444 __le32 rssi_ctl[4]; 3445 } __packed; 3446 3447 struct wmi_mgmt_rx_event_v1 { 3448 struct wmi_mgmt_rx_hdr_v1 hdr; 3449 u8 buf[]; 3450 } __packed; 3451 3452 struct wmi_mgmt_rx_event_v2 { 3453 struct wmi_mgmt_rx_hdr_v2 hdr; 3454 u8 buf[]; 3455 } __packed; 3456 3457 struct wmi_10_4_mgmt_rx_hdr { 3458 __le32 channel; 3459 __le32 snr; 3460 u8 rssi_ctl[4]; 3461 __le32 rate; 3462 __le32 phy_mode; 3463 __le32 buf_len; 3464 __le32 status; 3465 } __packed; 3466 3467 struct wmi_10_4_mgmt_rx_event { 3468 struct wmi_10_4_mgmt_rx_hdr hdr; 3469 u8 buf[]; 3470 } __packed; 3471 3472 struct wmi_mgmt_rx_ext_info { 3473 __le64 rx_mac_timestamp; 3474 } __packed __aligned(4); 3475 3476 #define WMI_RX_STATUS_OK 0x00 3477 #define WMI_RX_STATUS_ERR_CRC 0x01 3478 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3479 #define WMI_RX_STATUS_ERR_MIC 0x10 3480 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3481 /* Extension data at the end of mgmt frame */ 3482 #define WMI_RX_STATUS_EXT_INFO 0x40 3483 3484 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3485 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3486 #define PHY_ERROR_GEN_RADAR 0x05 3487 3488 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3489 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3490 3491 enum phy_err_type { 3492 PHY_ERROR_UNKNOWN, 3493 PHY_ERROR_SPECTRAL_SCAN, 3494 PHY_ERROR_FALSE_RADAR_EXT, 3495 PHY_ERROR_RADAR 3496 }; 3497 3498 struct wmi_phyerr { 3499 __le32 tsf_timestamp; 3500 __le16 freq1; 3501 __le16 freq2; 3502 u8 rssi_combined; 3503 u8 chan_width_mhz; 3504 u8 phy_err_code; 3505 u8 rsvd0; 3506 __le32 rssi_chains[4]; 3507 __le16 nf_chains[4]; 3508 __le32 buf_len; 3509 u8 buf[]; 3510 } __packed; 3511 3512 struct wmi_phyerr_event { 3513 __le32 num_phyerrs; 3514 __le32 tsf_l32; 3515 __le32 tsf_u32; 3516 3517 /* array of struct wmi_phyerr */ 3518 u8 phyerrs[]; 3519 } __packed; 3520 3521 struct wmi_10_4_phyerr_event { 3522 __le32 tsf_l32; 3523 __le32 tsf_u32; 3524 __le16 freq1; 3525 __le16 freq2; 3526 u8 rssi_combined; 3527 u8 chan_width_mhz; 3528 u8 phy_err_code; 3529 u8 rsvd0; 3530 __le32 rssi_chains[4]; 3531 __le16 nf_chains[4]; 3532 __le32 phy_err_mask[2]; 3533 __le32 tsf_timestamp; 3534 __le32 buf_len; 3535 u8 buf[]; 3536 } __packed; 3537 3538 struct wmi_radar_found_info { 3539 __le32 pri_min; 3540 __le32 pri_max; 3541 __le32 width_min; 3542 __le32 width_max; 3543 __le32 sidx_min; 3544 __le32 sidx_max; 3545 } __packed; 3546 3547 enum wmi_radar_confirmation_status { 3548 /* Detected radar was due to SW pulses */ 3549 WMI_SW_RADAR_DETECTED = 0, 3550 3551 WMI_RADAR_DETECTION_FAIL = 1, 3552 3553 /* Real radar detected */ 3554 WMI_HW_RADAR_DETECTED = 2, 3555 }; 3556 3557 #define PHYERR_TLV_SIG 0xBB 3558 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3559 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3560 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3561 3562 struct phyerr_radar_report { 3563 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3564 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3565 } __packed; 3566 3567 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3568 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3569 3570 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3571 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3572 3573 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3574 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3575 3576 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3577 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3578 3579 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3580 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3581 3582 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3583 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3584 3585 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3586 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3587 3588 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3589 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3590 3591 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3592 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3593 3594 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3595 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3596 3597 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3598 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3599 3600 struct phyerr_fft_report { 3601 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3602 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3603 } __packed; 3604 3605 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3606 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3607 3608 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3609 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3610 3611 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3612 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3613 3614 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3615 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3616 3617 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3618 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3619 3620 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3621 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3622 3623 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3624 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3625 3626 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3627 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3628 3629 struct phyerr_tlv { 3630 __le16 len; 3631 u8 tag; 3632 u8 sig; 3633 } __packed; 3634 3635 #define DFS_RSSI_POSSIBLY_FALSE 50 3636 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3637 3638 struct wmi_mgmt_tx_hdr { 3639 __le32 vdev_id; 3640 struct wmi_mac_addr peer_macaddr; 3641 __le32 tx_rate; 3642 __le32 tx_power; 3643 __le32 buf_len; 3644 } __packed; 3645 3646 struct wmi_mgmt_tx_cmd { 3647 struct wmi_mgmt_tx_hdr hdr; 3648 u8 buf[]; 3649 } __packed; 3650 3651 struct wmi_echo_event { 3652 __le32 value; 3653 } __packed; 3654 3655 struct wmi_echo_cmd { 3656 __le32 value; 3657 } __packed; 3658 3659 struct wmi_pdev_set_regdomain_cmd { 3660 __le32 reg_domain; 3661 __le32 reg_domain_2G; 3662 __le32 reg_domain_5G; 3663 __le32 conformance_test_limit_2G; 3664 __le32 conformance_test_limit_5G; 3665 } __packed; 3666 3667 enum wmi_dfs_region { 3668 /* Uninitialized dfs domain */ 3669 WMI_UNINIT_DFS_DOMAIN = 0, 3670 3671 /* FCC3 dfs domain */ 3672 WMI_FCC_DFS_DOMAIN = 1, 3673 3674 /* ETSI dfs domain */ 3675 WMI_ETSI_DFS_DOMAIN = 2, 3676 3677 /*Japan dfs domain */ 3678 WMI_MKK4_DFS_DOMAIN = 3, 3679 }; 3680 3681 struct wmi_pdev_set_regdomain_cmd_10x { 3682 __le32 reg_domain; 3683 __le32 reg_domain_2G; 3684 __le32 reg_domain_5G; 3685 __le32 conformance_test_limit_2G; 3686 __le32 conformance_test_limit_5G; 3687 3688 /* dfs domain from wmi_dfs_region */ 3689 __le32 dfs_domain; 3690 } __packed; 3691 3692 /* Command to set/unset chip in quiet mode */ 3693 struct wmi_pdev_set_quiet_cmd { 3694 /* period in TUs */ 3695 __le32 period; 3696 3697 /* duration in TUs */ 3698 __le32 duration; 3699 3700 /* offset in TUs */ 3701 __le32 next_start; 3702 3703 /* enable/disable */ 3704 __le32 enabled; 3705 } __packed; 3706 3707 /* 3708 * 802.11g protection mode. 3709 */ 3710 enum ath10k_protmode { 3711 ATH10K_PROT_NONE = 0, /* no protection */ 3712 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3713 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3714 }; 3715 3716 enum wmi_rtscts_profile { 3717 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3718 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3719 WMI_RTSCTS_ACROSS_SW_RETRIES 3720 }; 3721 3722 #define WMI_RTSCTS_ENABLED 1 3723 #define WMI_RTSCTS_SET_MASK 0x0f 3724 #define WMI_RTSCTS_SET_LSB 0 3725 3726 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3727 #define WMI_RTSCTS_PROFILE_LSB 4 3728 3729 enum wmi_beacon_gen_mode { 3730 WMI_BEACON_STAGGERED_MODE = 0, 3731 WMI_BEACON_BURST_MODE = 1 3732 }; 3733 3734 enum wmi_csa_event_ies_present_flag { 3735 WMI_CSA_IE_PRESENT = 0x00000001, 3736 WMI_XCSA_IE_PRESENT = 0x00000002, 3737 WMI_WBW_IE_PRESENT = 0x00000004, 3738 WMI_CSWARP_IE_PRESENT = 0x00000008, 3739 }; 3740 3741 /* wmi CSA receive event from beacon frame */ 3742 struct wmi_csa_event { 3743 __le32 i_fc_dur; 3744 /* Bit 0-15: FC */ 3745 /* Bit 16-31: DUR */ 3746 struct wmi_mac_addr i_addr1; 3747 struct wmi_mac_addr i_addr2; 3748 __le32 csa_ie[2]; 3749 __le32 xcsa_ie[2]; 3750 __le32 wb_ie[2]; 3751 __le32 cswarp_ie; 3752 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3753 } __packed; 3754 3755 /* the definition of different PDEV parameters */ 3756 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3757 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3758 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3759 3760 struct wmi_pdev_param_map { 3761 u32 tx_chain_mask; 3762 u32 rx_chain_mask; 3763 u32 txpower_limit2g; 3764 u32 txpower_limit5g; 3765 u32 txpower_scale; 3766 u32 beacon_gen_mode; 3767 u32 beacon_tx_mode; 3768 u32 resmgr_offchan_mode; 3769 u32 protection_mode; 3770 u32 dynamic_bw; 3771 u32 non_agg_sw_retry_th; 3772 u32 agg_sw_retry_th; 3773 u32 sta_kickout_th; 3774 u32 ac_aggrsize_scaling; 3775 u32 ltr_enable; 3776 u32 ltr_ac_latency_be; 3777 u32 ltr_ac_latency_bk; 3778 u32 ltr_ac_latency_vi; 3779 u32 ltr_ac_latency_vo; 3780 u32 ltr_ac_latency_timeout; 3781 u32 ltr_sleep_override; 3782 u32 ltr_rx_override; 3783 u32 ltr_tx_activity_timeout; 3784 u32 l1ss_enable; 3785 u32 dsleep_enable; 3786 u32 pcielp_txbuf_flush; 3787 u32 pcielp_txbuf_watermark; 3788 u32 pcielp_txbuf_tmo_en; 3789 u32 pcielp_txbuf_tmo_value; 3790 u32 pdev_stats_update_period; 3791 u32 vdev_stats_update_period; 3792 u32 peer_stats_update_period; 3793 u32 bcnflt_stats_update_period; 3794 u32 pmf_qos; 3795 u32 arp_ac_override; 3796 u32 dcs; 3797 u32 ani_enable; 3798 u32 ani_poll_period; 3799 u32 ani_listen_period; 3800 u32 ani_ofdm_level; 3801 u32 ani_cck_level; 3802 u32 dyntxchain; 3803 u32 proxy_sta; 3804 u32 idle_ps_config; 3805 u32 power_gating_sleep; 3806 u32 fast_channel_reset; 3807 u32 burst_dur; 3808 u32 burst_enable; 3809 u32 cal_period; 3810 u32 aggr_burst; 3811 u32 rx_decap_mode; 3812 u32 smart_antenna_default_antenna; 3813 u32 igmpmld_override; 3814 u32 igmpmld_tid; 3815 u32 antenna_gain; 3816 u32 rx_filter; 3817 u32 set_mcast_to_ucast_tid; 3818 u32 proxy_sta_mode; 3819 u32 set_mcast2ucast_mode; 3820 u32 set_mcast2ucast_buffer; 3821 u32 remove_mcast2ucast_buffer; 3822 u32 peer_sta_ps_statechg_enable; 3823 u32 igmpmld_ac_override; 3824 u32 block_interbss; 3825 u32 set_disable_reset_cmdid; 3826 u32 set_msdu_ttl_cmdid; 3827 u32 set_ppdu_duration_cmdid; 3828 u32 txbf_sound_period_cmdid; 3829 u32 set_promisc_mode_cmdid; 3830 u32 set_burst_mode_cmdid; 3831 u32 en_stats; 3832 u32 mu_group_policy; 3833 u32 noise_detection; 3834 u32 noise_threshold; 3835 u32 dpd_enable; 3836 u32 set_mcast_bcast_echo; 3837 u32 atf_strict_sch; 3838 u32 atf_sched_duration; 3839 u32 ant_plzn; 3840 u32 mgmt_retry_limit; 3841 u32 sensitivity_level; 3842 u32 signed_txpower_2g; 3843 u32 signed_txpower_5g; 3844 u32 enable_per_tid_amsdu; 3845 u32 enable_per_tid_ampdu; 3846 u32 cca_threshold; 3847 u32 rts_fixed_rate; 3848 u32 pdev_reset; 3849 u32 wapi_mbssid_offset; 3850 u32 arp_srcaddr; 3851 u32 arp_dstaddr; 3852 u32 enable_btcoex; 3853 u32 rfkill_config; 3854 u32 rfkill_enable; 3855 u32 peer_stats_info_enable; 3856 }; 3857 3858 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3859 3860 enum wmi_pdev_param { 3861 /* TX chain mask */ 3862 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3863 /* RX chain mask */ 3864 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3865 /* TX power limit for 2G Radio */ 3866 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3867 /* TX power limit for 5G Radio */ 3868 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3869 /* TX power scale */ 3870 WMI_PDEV_PARAM_TXPOWER_SCALE, 3871 /* Beacon generation mode . 0: host, 1: target */ 3872 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3873 /* Beacon generation mode . 0: staggered 1: bursted */ 3874 WMI_PDEV_PARAM_BEACON_TX_MODE, 3875 /* 3876 * Resource manager off chan mode . 3877 * 0: turn off offchan mode. 1: turn on offchan mode 3878 */ 3879 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3880 /* 3881 * Protection mode: 3882 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3883 */ 3884 WMI_PDEV_PARAM_PROTECTION_MODE, 3885 /* 3886 * Dynamic bandwidth - 0: disable, 1: enable 3887 * 3888 * When enabled HW rate control tries different bandwidths when 3889 * retransmitting frames. 3890 */ 3891 WMI_PDEV_PARAM_DYNAMIC_BW, 3892 /* Non aggregate/ 11g sw retry threshold.0-disable */ 3893 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3894 /* aggregate sw retry threshold. 0-disable*/ 3895 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3896 /* Station kickout threshold (non of consecutive failures).0-disable */ 3897 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3898 /* Aggerate size scaling configuration per AC */ 3899 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3900 /* LTR enable */ 3901 WMI_PDEV_PARAM_LTR_ENABLE, 3902 /* LTR latency for BE, in us */ 3903 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3904 /* LTR latency for BK, in us */ 3905 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3906 /* LTR latency for VI, in us */ 3907 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3908 /* LTR latency for VO, in us */ 3909 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3910 /* LTR AC latency timeout, in ms */ 3911 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3912 /* LTR platform latency override, in us */ 3913 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3914 /* LTR-RX override, in us */ 3915 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3916 /* Tx activity timeout for LTR, in us */ 3917 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3918 /* L1SS state machine enable */ 3919 WMI_PDEV_PARAM_L1SS_ENABLE, 3920 /* Deep sleep state machine enable */ 3921 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3922 /* RX buffering flush enable */ 3923 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3924 /* RX buffering matermark */ 3925 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3926 /* RX buffering timeout enable */ 3927 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3928 /* RX buffering timeout value */ 3929 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3930 /* pdev level stats update period in ms */ 3931 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3932 /* vdev level stats update period in ms */ 3933 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3934 /* peer level stats update period in ms */ 3935 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3936 /* beacon filter status update period */ 3937 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3938 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3939 WMI_PDEV_PARAM_PMF_QOS, 3940 /* Access category on which ARP frames are sent */ 3941 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3942 /* DCS configuration */ 3943 WMI_PDEV_PARAM_DCS, 3944 /* Enable/Disable ANI on target */ 3945 WMI_PDEV_PARAM_ANI_ENABLE, 3946 /* configure the ANI polling period */ 3947 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3948 /* configure the ANI listening period */ 3949 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3950 /* configure OFDM immunity level */ 3951 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3952 /* configure CCK immunity level */ 3953 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3954 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3955 WMI_PDEV_PARAM_DYNTXCHAIN, 3956 /* Enable/Disable proxy STA */ 3957 WMI_PDEV_PARAM_PROXY_STA, 3958 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3959 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3960 /* Enable/Disable power gating sleep */ 3961 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3962 }; 3963 3964 enum wmi_10x_pdev_param { 3965 /* TX chian mask */ 3966 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3967 /* RX chian mask */ 3968 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3969 /* TX power limit for 2G Radio */ 3970 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3971 /* TX power limit for 5G Radio */ 3972 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3973 /* TX power scale */ 3974 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3975 /* Beacon generation mode . 0: host, 1: target */ 3976 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3977 /* Beacon generation mode . 0: staggered 1: bursted */ 3978 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3979 /* 3980 * Resource manager off chan mode . 3981 * 0: turn off offchan mode. 1: turn on offchan mode 3982 */ 3983 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3984 /* 3985 * Protection mode: 3986 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3987 */ 3988 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3989 /* Dynamic bandwidth 0: disable 1: enable */ 3990 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3991 /* Non aggregate/ 11g sw retry threshold.0-disable */ 3992 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3993 /* aggregate sw retry threshold. 0-disable*/ 3994 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3995 /* Station kickout threshold (non of consecutive failures).0-disable */ 3996 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3997 /* Aggerate size scaling configuration per AC */ 3998 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3999 /* LTR enable */ 4000 WMI_10X_PDEV_PARAM_LTR_ENABLE, 4001 /* LTR latency for BE, in us */ 4002 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 4003 /* LTR latency for BK, in us */ 4004 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 4005 /* LTR latency for VI, in us */ 4006 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 4007 /* LTR latency for VO, in us */ 4008 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 4009 /* LTR AC latency timeout, in ms */ 4010 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4011 /* LTR platform latency override, in us */ 4012 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4013 /* LTR-RX override, in us */ 4014 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 4015 /* Tx activity timeout for LTR, in us */ 4016 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4017 /* L1SS state machine enable */ 4018 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 4019 /* Deep sleep state machine enable */ 4020 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 4021 /* pdev level stats update period in ms */ 4022 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4023 /* vdev level stats update period in ms */ 4024 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4025 /* peer level stats update period in ms */ 4026 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4027 /* beacon filter status update period */ 4028 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4029 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 4030 WMI_10X_PDEV_PARAM_PMF_QOS, 4031 /* Access category on which ARP and DHCP frames are sent */ 4032 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 4033 /* DCS configuration */ 4034 WMI_10X_PDEV_PARAM_DCS, 4035 /* Enable/Disable ANI on target */ 4036 WMI_10X_PDEV_PARAM_ANI_ENABLE, 4037 /* configure the ANI polling period */ 4038 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 4039 /* configure the ANI listening period */ 4040 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 4041 /* configure OFDM immunity level */ 4042 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 4043 /* configure CCK immunity level */ 4044 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 4045 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 4046 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 4047 /* Enable/Disable Fast channel reset*/ 4048 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 4049 /* Set Bursting DUR */ 4050 WMI_10X_PDEV_PARAM_BURST_DUR, 4051 /* Set Bursting Enable*/ 4052 WMI_10X_PDEV_PARAM_BURST_ENABLE, 4053 4054 /* following are available as of firmware 10.2 */ 4055 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4056 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 4057 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 4058 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 4059 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 4060 WMI_10X_PDEV_PARAM_RX_FILTER, 4061 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 4062 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 4063 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4064 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4065 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4066 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 4067 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 4068 WMI_10X_PDEV_PARAM_CAL_PERIOD, 4069 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 4070 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 4071 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4072 WMI_10X_PDEV_PARAM_PDEV_RESET 4073 }; 4074 4075 enum wmi_10_4_pdev_param { 4076 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 4077 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 4078 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 4079 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 4080 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 4081 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 4082 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 4083 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 4084 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 4085 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 4086 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 4087 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 4088 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 4089 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 4090 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 4091 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 4092 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 4093 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 4094 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 4095 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4096 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4097 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 4098 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4099 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 4100 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 4101 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 4102 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 4103 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 4104 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 4105 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4106 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4107 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4108 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4109 WMI_10_4_PDEV_PARAM_PMF_QOS, 4110 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 4111 WMI_10_4_PDEV_PARAM_DCS, 4112 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4113 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4114 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4115 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4116 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4117 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4118 WMI_10_4_PDEV_PARAM_PROXY_STA, 4119 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4120 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4121 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4122 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4123 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4124 WMI_10_4_PDEV_PARAM_BURST_DUR, 4125 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4126 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4127 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4128 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4129 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4130 WMI_10_4_PDEV_PARAM_RX_FILTER, 4131 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4132 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4133 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4134 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4135 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4136 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4137 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4138 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4139 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4140 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4141 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4142 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4143 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4144 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4145 WMI_10_4_PDEV_PARAM_EN_STATS, 4146 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4147 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4148 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4149 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4150 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4151 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4152 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4153 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4154 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4155 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4156 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4157 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4158 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4159 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4160 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4161 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4162 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4163 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4164 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4165 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4166 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4167 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4168 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4169 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4170 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4171 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4172 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4173 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4174 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4175 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4176 }; 4177 4178 struct wmi_pdev_set_param_cmd { 4179 __le32 param_id; 4180 __le32 param_value; 4181 } __packed; 4182 4183 struct wmi_pdev_set_base_macaddr_cmd { 4184 struct wmi_mac_addr mac_addr; 4185 } __packed; 4186 4187 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4188 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4189 4190 struct wmi_pdev_get_tpc_config_cmd { 4191 /* parameter */ 4192 __le32 param; 4193 } __packed; 4194 4195 #define WMI_TPC_CONFIG_PARAM 1 4196 #define WMI_TPC_FINAL_RATE_MAX 240 4197 #define WMI_TPC_TX_N_CHAIN 4 4198 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4199 #define WMI_TPC_PREAM_TABLE_MAX 10 4200 #define WMI_TPC_FLAG 3 4201 #define WMI_TPC_BUF_SIZE 10 4202 #define WMI_TPC_BEAMFORMING 2 4203 4204 enum wmi_tpc_table_type { 4205 WMI_TPC_TABLE_TYPE_CDD = 0, 4206 WMI_TPC_TABLE_TYPE_STBC = 1, 4207 WMI_TPC_TABLE_TYPE_TXBF = 2, 4208 }; 4209 4210 enum wmi_tpc_config_event_flag { 4211 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4212 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4213 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4214 }; 4215 4216 struct wmi_pdev_tpc_config_event { 4217 __le32 reg_domain; 4218 __le32 chan_freq; 4219 __le32 phy_mode; 4220 __le32 twice_antenna_reduction; 4221 __le32 twice_max_rd_power; 4222 a_sle32 twice_antenna_gain; 4223 __le32 power_limit; 4224 __le32 rate_max; 4225 __le32 num_tx_chain; 4226 __le32 ctl; 4227 __le32 flags; 4228 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4229 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4230 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4231 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4232 u8 rates_array[WMI_TPC_RATE_MAX]; 4233 } __packed; 4234 4235 /* Transmit power scale factor. */ 4236 enum wmi_tp_scale { 4237 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4238 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4239 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4240 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4241 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4242 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4243 }; 4244 4245 struct wmi_pdev_tpc_final_table_event { 4246 __le32 reg_domain; 4247 __le32 chan_freq; 4248 __le32 phy_mode; 4249 __le32 twice_antenna_reduction; 4250 __le32 twice_max_rd_power; 4251 a_sle32 twice_antenna_gain; 4252 __le32 power_limit; 4253 __le32 rate_max; 4254 __le32 num_tx_chain; 4255 __le32 ctl; 4256 __le32 flags; 4257 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4258 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4259 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4260 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4261 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4262 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4263 [WMI_TPC_TX_N_CHAIN]; 4264 } __packed; 4265 4266 struct wmi_pdev_get_tpc_table_cmd { 4267 __le32 param; 4268 } __packed; 4269 4270 enum wmi_tpc_pream_2ghz { 4271 WMI_TPC_PREAM_2GHZ_CCK = 0, 4272 WMI_TPC_PREAM_2GHZ_OFDM, 4273 WMI_TPC_PREAM_2GHZ_HT20, 4274 WMI_TPC_PREAM_2GHZ_HT40, 4275 WMI_TPC_PREAM_2GHZ_VHT20, 4276 WMI_TPC_PREAM_2GHZ_VHT40, 4277 WMI_TPC_PREAM_2GHZ_VHT80, 4278 }; 4279 4280 enum wmi_tpc_pream_5ghz { 4281 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4282 WMI_TPC_PREAM_5GHZ_HT20, 4283 WMI_TPC_PREAM_5GHZ_HT40, 4284 WMI_TPC_PREAM_5GHZ_VHT20, 4285 WMI_TPC_PREAM_5GHZ_VHT40, 4286 WMI_TPC_PREAM_5GHZ_VHT80, 4287 WMI_TPC_PREAM_5GHZ_HTCUP, 4288 }; 4289 4290 #define WMI_PEER_PS_STATE_DISABLED 2 4291 4292 struct wmi_peer_sta_ps_state_chg_event { 4293 struct wmi_mac_addr peer_macaddr; 4294 __le32 peer_ps_state; 4295 } __packed; 4296 4297 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4298 4299 struct wmi_debug_mesg_event { 4300 /* message buffer, NULL terminated */ 4301 char bufp[WMI_MAX_DEBUG_MESG]; 4302 } __packed; 4303 4304 enum { 4305 /* P2P device */ 4306 VDEV_SUBTYPE_P2PDEV = 0, 4307 /* P2P client */ 4308 VDEV_SUBTYPE_P2PCLI, 4309 /* P2P GO */ 4310 VDEV_SUBTYPE_P2PGO, 4311 /* BT3.0 HS */ 4312 VDEV_SUBTYPE_BT, 4313 }; 4314 4315 struct wmi_pdev_set_channel_cmd { 4316 /* idnore power , only use flags , mode and freq */ 4317 struct wmi_channel chan; 4318 } __packed; 4319 4320 struct wmi_pdev_pktlog_enable_cmd { 4321 __le32 ev_bitmap; 4322 } __packed; 4323 4324 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4325 #define WMI_DSCP_MAP_MAX (64) 4326 struct wmi_pdev_set_dscp_tid_map_cmd { 4327 /* map indicating DSCP to TID conversion */ 4328 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4329 } __packed; 4330 4331 enum mcast_bcast_rate_id { 4332 WMI_SET_MCAST_RATE, 4333 WMI_SET_BCAST_RATE 4334 }; 4335 4336 struct mcast_bcast_rate { 4337 enum mcast_bcast_rate_id rate_id; 4338 __le32 rate; 4339 } __packed; 4340 4341 struct wmi_wmm_params { 4342 __le32 cwmin; 4343 __le32 cwmax; 4344 __le32 aifs; 4345 __le32 txop; 4346 __le32 acm; 4347 __le32 no_ack; 4348 } __packed; 4349 4350 struct wmi_pdev_set_wmm_params { 4351 struct wmi_wmm_params ac_be; 4352 struct wmi_wmm_params ac_bk; 4353 struct wmi_wmm_params ac_vi; 4354 struct wmi_wmm_params ac_vo; 4355 } __packed; 4356 4357 struct wmi_wmm_params_arg { 4358 u32 cwmin; 4359 u32 cwmax; 4360 u32 aifs; 4361 u32 txop; 4362 u32 acm; 4363 u32 no_ack; 4364 }; 4365 4366 struct wmi_wmm_params_all_arg { 4367 struct wmi_wmm_params_arg ac_be; 4368 struct wmi_wmm_params_arg ac_bk; 4369 struct wmi_wmm_params_arg ac_vi; 4370 struct wmi_wmm_params_arg ac_vo; 4371 }; 4372 4373 struct wmi_pdev_stats_tx { 4374 /* Num HTT cookies queued to dispatch list */ 4375 __le32 comp_queued; 4376 4377 /* Num HTT cookies dispatched */ 4378 __le32 comp_delivered; 4379 4380 /* Num MSDU queued to WAL */ 4381 __le32 msdu_enqued; 4382 4383 /* Num MPDU queue to WAL */ 4384 __le32 mpdu_enqued; 4385 4386 /* Num MSDUs dropped by WMM limit */ 4387 __le32 wmm_drop; 4388 4389 /* Num Local frames queued */ 4390 __le32 local_enqued; 4391 4392 /* Num Local frames done */ 4393 __le32 local_freed; 4394 4395 /* Num queued to HW */ 4396 __le32 hw_queued; 4397 4398 /* Num PPDU reaped from HW */ 4399 __le32 hw_reaped; 4400 4401 /* Num underruns */ 4402 __le32 underrun; 4403 4404 /* Num PPDUs cleaned up in TX abort */ 4405 __le32 tx_abort; 4406 4407 /* Num MPDUs requeued by SW */ 4408 __le32 mpdus_requeued; 4409 4410 /* excessive retries */ 4411 __le32 tx_ko; 4412 4413 /* data hw rate code */ 4414 __le32 data_rc; 4415 4416 /* Scheduler self triggers */ 4417 __le32 self_triggers; 4418 4419 /* frames dropped due to excessive sw retries */ 4420 __le32 sw_retry_failure; 4421 4422 /* illegal rate phy errors */ 4423 __le32 illgl_rate_phy_err; 4424 4425 /* wal pdev continuous xretry */ 4426 __le32 pdev_cont_xretry; 4427 4428 /* wal pdev continuous xretry */ 4429 __le32 pdev_tx_timeout; 4430 4431 /* wal pdev resets */ 4432 __le32 pdev_resets; 4433 4434 /* frames dropped due to non-availability of stateless TIDs */ 4435 __le32 stateless_tid_alloc_failure; 4436 4437 __le32 phy_underrun; 4438 4439 /* MPDU is more than txop limit */ 4440 __le32 txop_ovf; 4441 } __packed; 4442 4443 struct wmi_10_4_pdev_stats_tx { 4444 /* Num HTT cookies queued to dispatch list */ 4445 __le32 comp_queued; 4446 4447 /* Num HTT cookies dispatched */ 4448 __le32 comp_delivered; 4449 4450 /* Num MSDU queued to WAL */ 4451 __le32 msdu_enqued; 4452 4453 /* Num MPDU queue to WAL */ 4454 __le32 mpdu_enqued; 4455 4456 /* Num MSDUs dropped by WMM limit */ 4457 __le32 wmm_drop; 4458 4459 /* Num Local frames queued */ 4460 __le32 local_enqued; 4461 4462 /* Num Local frames done */ 4463 __le32 local_freed; 4464 4465 /* Num queued to HW */ 4466 __le32 hw_queued; 4467 4468 /* Num PPDU reaped from HW */ 4469 __le32 hw_reaped; 4470 4471 /* Num underruns */ 4472 __le32 underrun; 4473 4474 /* HW Paused. */ 4475 __le32 hw_paused; 4476 4477 /* Num PPDUs cleaned up in TX abort */ 4478 __le32 tx_abort; 4479 4480 /* Num MPDUs requeued by SW */ 4481 __le32 mpdus_requeued; 4482 4483 /* excessive retries */ 4484 __le32 tx_ko; 4485 4486 /* data hw rate code */ 4487 __le32 data_rc; 4488 4489 /* Scheduler self triggers */ 4490 __le32 self_triggers; 4491 4492 /* frames dropped due to excessive sw retries */ 4493 __le32 sw_retry_failure; 4494 4495 /* illegal rate phy errors */ 4496 __le32 illgl_rate_phy_err; 4497 4498 /* wal pdev continuous xretry */ 4499 __le32 pdev_cont_xretry; 4500 4501 /* wal pdev tx timeouts */ 4502 __le32 pdev_tx_timeout; 4503 4504 /* wal pdev resets */ 4505 __le32 pdev_resets; 4506 4507 /* frames dropped due to non-availability of stateless TIDs */ 4508 __le32 stateless_tid_alloc_failure; 4509 4510 __le32 phy_underrun; 4511 4512 /* MPDU is more than txop limit */ 4513 __le32 txop_ovf; 4514 4515 /* Number of Sequences posted */ 4516 __le32 seq_posted; 4517 4518 /* Number of Sequences failed queueing */ 4519 __le32 seq_failed_queueing; 4520 4521 /* Number of Sequences completed */ 4522 __le32 seq_completed; 4523 4524 /* Number of Sequences restarted */ 4525 __le32 seq_restarted; 4526 4527 /* Number of MU Sequences posted */ 4528 __le32 mu_seq_posted; 4529 4530 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4531 __le32 mpdus_sw_flush; 4532 4533 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4534 __le32 mpdus_hw_filter; 4535 4536 /* Num MPDUs truncated by PDG 4537 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4538 */ 4539 __le32 mpdus_truncated; 4540 4541 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4542 __le32 mpdus_ack_failed; 4543 4544 /* Num MPDUs that was dropped due to expiry. */ 4545 __le32 mpdus_expired; 4546 } __packed; 4547 4548 struct wmi_pdev_stats_rx { 4549 /* Cnts any change in ring routing mid-ppdu */ 4550 __le32 mid_ppdu_route_change; 4551 4552 /* Total number of statuses processed */ 4553 __le32 status_rcvd; 4554 4555 /* Extra frags on rings 0-3 */ 4556 __le32 r0_frags; 4557 __le32 r1_frags; 4558 __le32 r2_frags; 4559 __le32 r3_frags; 4560 4561 /* MSDUs / MPDUs delivered to HTT */ 4562 __le32 htt_msdus; 4563 __le32 htt_mpdus; 4564 4565 /* MSDUs / MPDUs delivered to local stack */ 4566 __le32 loc_msdus; 4567 __le32 loc_mpdus; 4568 4569 /* AMSDUs that have more MSDUs than the status ring size */ 4570 __le32 oversize_amsdu; 4571 4572 /* Number of PHY errors */ 4573 __le32 phy_errs; 4574 4575 /* Number of PHY errors drops */ 4576 __le32 phy_err_drop; 4577 4578 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4579 __le32 mpdu_errs; 4580 } __packed; 4581 4582 struct wmi_pdev_stats_peer { 4583 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4584 __le32 dummy; 4585 } __packed; 4586 4587 enum wmi_stats_id { 4588 WMI_STAT_PEER = BIT(0), 4589 WMI_STAT_AP = BIT(1), 4590 WMI_STAT_PDEV = BIT(2), 4591 WMI_STAT_VDEV = BIT(3), 4592 WMI_STAT_BCNFLT = BIT(4), 4593 WMI_STAT_VDEV_RATE = BIT(5), 4594 }; 4595 4596 enum wmi_10_4_stats_id { 4597 WMI_10_4_STAT_PEER = BIT(0), 4598 WMI_10_4_STAT_AP = BIT(1), 4599 WMI_10_4_STAT_INST = BIT(2), 4600 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4601 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4602 }; 4603 4604 enum wmi_tlv_stats_id { 4605 WMI_TLV_STAT_PEER = BIT(0), 4606 WMI_TLV_STAT_AP = BIT(1), 4607 WMI_TLV_STAT_PDEV = BIT(2), 4608 WMI_TLV_STAT_VDEV = BIT(3), 4609 WMI_TLV_STAT_PEER_EXTD = BIT(10), 4610 }; 4611 4612 struct wlan_inst_rssi_args { 4613 __le16 cfg_retry_count; 4614 __le16 retry_count; 4615 }; 4616 4617 struct wmi_request_stats_cmd { 4618 __le32 stats_id; 4619 4620 __le32 vdev_id; 4621 4622 /* peer MAC address */ 4623 struct wmi_mac_addr peer_macaddr; 4624 4625 /* Instantaneous RSSI arguments */ 4626 struct wlan_inst_rssi_args inst_rssi_args; 4627 } __packed; 4628 4629 enum wmi_peer_stats_info_request_type { 4630 /* request stats of one specified peer */ 4631 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01, 4632 /* request stats of all peers belong to specified VDEV */ 4633 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02, 4634 }; 4635 4636 /* Suspend option */ 4637 enum { 4638 /* suspend */ 4639 WMI_PDEV_SUSPEND, 4640 4641 /* suspend and disable all interrupts */ 4642 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4643 }; 4644 4645 struct wmi_pdev_suspend_cmd { 4646 /* suspend option sent to target */ 4647 __le32 suspend_opt; 4648 } __packed; 4649 4650 struct wmi_stats_event { 4651 __le32 stats_id; /* WMI_STAT_ */ 4652 /* 4653 * number of pdev stats event structures 4654 * (wmi_pdev_stats) 0 or 1 4655 */ 4656 __le32 num_pdev_stats; 4657 /* 4658 * number of vdev stats event structures 4659 * (wmi_vdev_stats) 0 or max vdevs 4660 */ 4661 __le32 num_vdev_stats; 4662 /* 4663 * number of peer stats event structures 4664 * (wmi_peer_stats) 0 or max peers 4665 */ 4666 __le32 num_peer_stats; 4667 __le32 num_bcnflt_stats; 4668 /* 4669 * followed by 4670 * num_pdev_stats * size of(struct wmi_pdev_stats) 4671 * num_vdev_stats * size of(struct wmi_vdev_stats) 4672 * num_peer_stats * size of(struct wmi_peer_stats) 4673 * 4674 * By having a zero sized array, the pointer to data area 4675 * becomes available without increasing the struct size 4676 */ 4677 u8 data[]; 4678 } __packed; 4679 4680 struct wmi_10_2_stats_event { 4681 __le32 stats_id; /* %WMI_REQUEST_ */ 4682 __le32 num_pdev_stats; 4683 __le32 num_pdev_ext_stats; 4684 __le32 num_vdev_stats; 4685 __le32 num_peer_stats; 4686 __le32 num_bcnflt_stats; 4687 u8 data[]; 4688 } __packed; 4689 4690 /* 4691 * PDEV statistics 4692 * TODO: add all PDEV stats here 4693 */ 4694 struct wmi_pdev_stats_base { 4695 __le32 chan_nf; 4696 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4697 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4698 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4699 __le32 cycle_count; /* Total on-channel time */ 4700 __le32 phy_err_count; 4701 __le32 chan_tx_pwr; 4702 } __packed; 4703 4704 struct wmi_pdev_stats { 4705 struct wmi_pdev_stats_base base; 4706 struct wmi_pdev_stats_tx tx; 4707 struct wmi_pdev_stats_rx rx; 4708 struct wmi_pdev_stats_peer peer; 4709 } __packed; 4710 4711 struct wmi_pdev_stats_extra { 4712 __le32 ack_rx_bad; 4713 __le32 rts_bad; 4714 __le32 rts_good; 4715 __le32 fcs_bad; 4716 __le32 no_beacons; 4717 __le32 mib_int_count; 4718 } __packed; 4719 4720 struct wmi_10x_pdev_stats { 4721 struct wmi_pdev_stats_base base; 4722 struct wmi_pdev_stats_tx tx; 4723 struct wmi_pdev_stats_rx rx; 4724 struct wmi_pdev_stats_peer peer; 4725 struct wmi_pdev_stats_extra extra; 4726 } __packed; 4727 4728 struct wmi_pdev_stats_mem { 4729 __le32 dram_free; 4730 __le32 iram_free; 4731 } __packed; 4732 4733 struct wmi_10_2_pdev_stats { 4734 struct wmi_pdev_stats_base base; 4735 struct wmi_pdev_stats_tx tx; 4736 __le32 mc_drop; 4737 struct wmi_pdev_stats_rx rx; 4738 __le32 pdev_rx_timeout; 4739 struct wmi_pdev_stats_mem mem; 4740 struct wmi_pdev_stats_peer peer; 4741 struct wmi_pdev_stats_extra extra; 4742 } __packed; 4743 4744 struct wmi_10_4_pdev_stats { 4745 struct wmi_pdev_stats_base base; 4746 struct wmi_10_4_pdev_stats_tx tx; 4747 struct wmi_pdev_stats_rx rx; 4748 __le32 rx_ovfl_errs; 4749 struct wmi_pdev_stats_mem mem; 4750 __le32 sram_free_size; 4751 struct wmi_pdev_stats_extra extra; 4752 } __packed; 4753 4754 /* 4755 * VDEV statistics 4756 */ 4757 4758 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4759 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4760 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4761 4762 struct wmi_vdev_stats { 4763 __le32 vdev_id; 4764 } __packed; 4765 4766 struct wmi_vdev_stats_extd { 4767 __le32 vdev_id; 4768 __le32 ppdu_aggr_cnt; 4769 __le32 ppdu_noack; 4770 __le32 mpdu_queued; 4771 __le32 ppdu_nonaggr_cnt; 4772 __le32 mpdu_sw_requeued; 4773 __le32 mpdu_suc_retry; 4774 __le32 mpdu_suc_multitry; 4775 __le32 mpdu_fail_retry; 4776 __le32 tx_ftm_suc; 4777 __le32 tx_ftm_suc_retry; 4778 __le32 tx_ftm_fail; 4779 __le32 rx_ftmr_cnt; 4780 __le32 rx_ftmr_dup_cnt; 4781 __le32 rx_iftmr_cnt; 4782 __le32 rx_iftmr_dup_cnt; 4783 __le32 reserved[6]; 4784 } __packed; 4785 4786 /* 4787 * peer statistics. 4788 * TODO: add more stats 4789 */ 4790 struct wmi_peer_stats { 4791 struct wmi_mac_addr peer_macaddr; 4792 __le32 peer_rssi; 4793 __le32 peer_tx_rate; 4794 } __packed; 4795 4796 struct wmi_10x_peer_stats { 4797 struct wmi_peer_stats old; 4798 __le32 peer_rx_rate; 4799 } __packed; 4800 4801 struct wmi_10_2_peer_stats { 4802 struct wmi_peer_stats old; 4803 __le32 peer_rx_rate; 4804 __le32 current_per; 4805 __le32 retries; 4806 __le32 tx_rate_count; 4807 __le32 max_4ms_frame_len; 4808 __le32 total_sub_frames; 4809 __le32 tx_bytes; 4810 __le32 num_pkt_loss_overflow[4]; 4811 __le32 num_pkt_loss_excess_retry[4]; 4812 } __packed; 4813 4814 struct wmi_10_2_4_peer_stats { 4815 struct wmi_10_2_peer_stats common; 4816 __le32 peer_rssi_changed; 4817 } __packed; 4818 4819 struct wmi_10_2_4_ext_peer_stats { 4820 struct wmi_10_2_peer_stats common; 4821 __le32 peer_rssi_changed; 4822 __le32 rx_duration; 4823 } __packed; 4824 4825 struct wmi_10_4_peer_stats { 4826 struct wmi_mac_addr peer_macaddr; 4827 __le32 peer_rssi; 4828 __le32 peer_rssi_seq_num; 4829 __le32 peer_tx_rate; 4830 __le32 peer_rx_rate; 4831 __le32 current_per; 4832 __le32 retries; 4833 __le32 tx_rate_count; 4834 __le32 max_4ms_frame_len; 4835 __le32 total_sub_frames; 4836 __le32 tx_bytes; 4837 __le32 num_pkt_loss_overflow[4]; 4838 __le32 num_pkt_loss_excess_retry[4]; 4839 __le32 peer_rssi_changed; 4840 } __packed; 4841 4842 struct wmi_10_4_peer_extd_stats { 4843 struct wmi_mac_addr peer_macaddr; 4844 __le32 inactive_time; 4845 __le32 peer_chain_rssi; 4846 __le32 rx_duration; 4847 __le32 reserved[10]; 4848 } __packed; 4849 4850 struct wmi_10_4_bss_bcn_stats { 4851 __le32 vdev_id; 4852 __le32 bss_bcns_dropped; 4853 __le32 bss_bcn_delivered; 4854 } __packed; 4855 4856 struct wmi_10_4_bss_bcn_filter_stats { 4857 __le32 bcns_dropped; 4858 __le32 bcns_delivered; 4859 __le32 active_filters; 4860 struct wmi_10_4_bss_bcn_stats bss_stats; 4861 } __packed; 4862 4863 struct wmi_10_2_pdev_ext_stats { 4864 __le32 rx_rssi_comb; 4865 __le32 rx_rssi[4]; 4866 __le32 rx_mcs[10]; 4867 __le32 tx_mcs[10]; 4868 __le32 ack_rssi; 4869 } __packed; 4870 4871 struct wmi_vdev_create_cmd { 4872 __le32 vdev_id; 4873 __le32 vdev_type; 4874 __le32 vdev_subtype; 4875 struct wmi_mac_addr vdev_macaddr; 4876 } __packed; 4877 4878 enum wmi_vdev_type { 4879 WMI_VDEV_TYPE_AP = 1, 4880 WMI_VDEV_TYPE_STA = 2, 4881 WMI_VDEV_TYPE_IBSS = 3, 4882 WMI_VDEV_TYPE_MONITOR = 4, 4883 }; 4884 4885 enum wmi_vdev_subtype { 4886 WMI_VDEV_SUBTYPE_NONE, 4887 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4888 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4889 WMI_VDEV_SUBTYPE_P2P_GO, 4890 WMI_VDEV_SUBTYPE_PROXY_STA, 4891 WMI_VDEV_SUBTYPE_MESH_11S, 4892 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4893 }; 4894 4895 enum wmi_vdev_subtype_legacy { 4896 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4897 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4898 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4899 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4900 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4901 }; 4902 4903 enum wmi_vdev_subtype_10_2_4 { 4904 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4905 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4906 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4907 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4908 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4909 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4910 }; 4911 4912 enum wmi_vdev_subtype_10_4 { 4913 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4914 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4915 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4916 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4917 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4918 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4919 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4920 }; 4921 4922 /* values for vdev_subtype */ 4923 4924 /* values for vdev_start_request flags */ 4925 /* 4926 * Indicates that AP VDEV uses hidden ssid. only valid for 4927 * AP/GO 4928 */ 4929 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4930 /* 4931 * Indicates if robust management frame/management frame 4932 * protection is enabled. For GO/AP vdevs, it indicates that 4933 * it may support station/client associations with RMF enabled. 4934 * For STA/client vdevs, it indicates that sta will 4935 * associate with AP with RMF enabled. 4936 */ 4937 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4938 4939 struct wmi_p2p_noa_descriptor { 4940 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4941 __le32 duration; /* Absent period duration in micro seconds */ 4942 __le32 interval; /* Absent period interval in micro seconds */ 4943 __le32 start_time; /* 32 bit tsf time when in starts */ 4944 } __packed; 4945 4946 struct wmi_vdev_start_request_cmd { 4947 /* WMI channel */ 4948 struct wmi_channel chan; 4949 /* unique id identifying the VDEV, generated by the caller */ 4950 __le32 vdev_id; 4951 /* requestor id identifying the caller module */ 4952 __le32 requestor_id; 4953 /* beacon interval from received beacon */ 4954 __le32 beacon_interval; 4955 /* DTIM Period from the received beacon */ 4956 __le32 dtim_period; 4957 /* Flags */ 4958 __le32 flags; 4959 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4960 struct wmi_ssid ssid; 4961 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4962 __le32 bcn_tx_rate; 4963 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4964 __le32 bcn_tx_power; 4965 /* number of p2p NOA descriptor(s) from scan entry */ 4966 __le32 num_noa_descriptors; 4967 /* 4968 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4969 * During CAC, Our HW shouldn't ack ditected frames 4970 */ 4971 __le32 disable_hw_ack; 4972 /* actual p2p NOA descriptor from scan entry */ 4973 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4974 } __packed; 4975 4976 struct wmi_vdev_restart_request_cmd { 4977 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4978 } __packed; 4979 4980 struct wmi_vdev_start_request_arg { 4981 u32 vdev_id; 4982 struct wmi_channel_arg channel; 4983 u32 bcn_intval; 4984 u32 dtim_period; 4985 u8 *ssid; 4986 u32 ssid_len; 4987 u32 bcn_tx_rate; 4988 u32 bcn_tx_power; 4989 bool disable_hw_ack; 4990 bool hidden_ssid; 4991 bool pmf_enabled; 4992 }; 4993 4994 struct wmi_vdev_delete_cmd { 4995 /* unique id identifying the VDEV, generated by the caller */ 4996 __le32 vdev_id; 4997 } __packed; 4998 4999 struct wmi_vdev_up_cmd { 5000 __le32 vdev_id; 5001 __le32 vdev_assoc_id; 5002 struct wmi_mac_addr vdev_bssid; 5003 } __packed; 5004 5005 struct wmi_vdev_stop_cmd { 5006 __le32 vdev_id; 5007 } __packed; 5008 5009 struct wmi_vdev_down_cmd { 5010 __le32 vdev_id; 5011 } __packed; 5012 5013 struct wmi_vdev_standby_response_cmd { 5014 /* unique id identifying the VDEV, generated by the caller */ 5015 __le32 vdev_id; 5016 } __packed; 5017 5018 struct wmi_vdev_resume_response_cmd { 5019 /* unique id identifying the VDEV, generated by the caller */ 5020 __le32 vdev_id; 5021 } __packed; 5022 5023 struct wmi_vdev_set_param_cmd { 5024 __le32 vdev_id; 5025 __le32 param_id; 5026 __le32 param_value; 5027 } __packed; 5028 5029 #define WMI_MAX_KEY_INDEX 3 5030 #define WMI_MAX_KEY_LEN 32 5031 5032 #define WMI_KEY_PAIRWISE 0x00 5033 #define WMI_KEY_GROUP 0x01 5034 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 5035 5036 struct wmi_key_seq_counter { 5037 __le32 key_seq_counter_l; 5038 __le32 key_seq_counter_h; 5039 } __packed; 5040 5041 enum wmi_cipher_suites { 5042 WMI_CIPHER_NONE, 5043 WMI_CIPHER_WEP, 5044 WMI_CIPHER_TKIP, 5045 WMI_CIPHER_AES_OCB, 5046 WMI_CIPHER_AES_CCM, 5047 WMI_CIPHER_WAPI, 5048 WMI_CIPHER_CKIP, 5049 WMI_CIPHER_AES_CMAC, 5050 WMI_CIPHER_AES_GCM, 5051 }; 5052 5053 enum wmi_tlv_cipher_suites { 5054 WMI_TLV_CIPHER_NONE, 5055 WMI_TLV_CIPHER_WEP, 5056 WMI_TLV_CIPHER_TKIP, 5057 WMI_TLV_CIPHER_AES_OCB, 5058 WMI_TLV_CIPHER_AES_CCM, 5059 WMI_TLV_CIPHER_WAPI, 5060 WMI_TLV_CIPHER_CKIP, 5061 WMI_TLV_CIPHER_AES_CMAC, 5062 WMI_TLV_CIPHER_ANY, 5063 WMI_TLV_CIPHER_AES_GCM, 5064 }; 5065 5066 struct wmi_vdev_install_key_cmd { 5067 __le32 vdev_id; 5068 struct wmi_mac_addr peer_macaddr; 5069 __le32 key_idx; 5070 __le32 key_flags; 5071 __le32 key_cipher; /* %WMI_CIPHER_ */ 5072 struct wmi_key_seq_counter key_rsc_counter; 5073 struct wmi_key_seq_counter key_global_rsc_counter; 5074 struct wmi_key_seq_counter key_tsc_counter; 5075 u8 wpi_key_rsc_counter[16]; 5076 u8 wpi_key_tsc_counter[16]; 5077 __le32 key_len; 5078 __le32 key_txmic_len; 5079 __le32 key_rxmic_len; 5080 5081 /* contains key followed by tx mic followed by rx mic */ 5082 u8 key_data[]; 5083 } __packed; 5084 5085 struct wmi_vdev_install_key_arg { 5086 u32 vdev_id; 5087 const u8 *macaddr; 5088 u32 key_idx; 5089 u32 key_flags; 5090 u32 key_cipher; 5091 u32 key_len; 5092 u32 key_txmic_len; 5093 u32 key_rxmic_len; 5094 const void *key_data; 5095 }; 5096 5097 /* 5098 * vdev fixed rate format: 5099 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 5100 * - nss - b5:b4 - ss number (0 mean 1ss) 5101 * - rate_mcs - b3:b0 - as below 5102 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 5103 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 5104 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 5105 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 5106 * HT/VHT: MCS index 5107 */ 5108 5109 /* Preamble types to be used with VDEV fixed rate configuration */ 5110 enum wmi_rate_preamble { 5111 WMI_RATE_PREAMBLE_OFDM, 5112 WMI_RATE_PREAMBLE_CCK, 5113 WMI_RATE_PREAMBLE_HT, 5114 WMI_RATE_PREAMBLE_VHT, 5115 }; 5116 5117 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 5118 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 5119 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 5120 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 5121 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 5122 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 5123 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 5124 (((preamble) << 6) | ((nss) << 4) | (rate)) 5125 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 5126 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 5127 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) 5128 5129 #define ATH10K_VHT_MCS_NUM 10 5130 #define ATH10K_BW_NUM 6 5131 #define ATH10K_NSS_NUM 4 5132 #define ATH10K_LEGACY_NUM 12 5133 #define ATH10K_GI_NUM 2 5134 #define ATH10K_HT_MCS_NUM 32 5135 #define ATH10K_RATE_TABLE_NUM 320 5136 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 5137 5138 /* Value to disable fixed rate setting */ 5139 #define WMI_FIXED_RATE_NONE (0xff) 5140 5141 struct wmi_peer_param_map { 5142 u32 smps_state; 5143 u32 ampdu; 5144 u32 authorize; 5145 u32 chan_width; 5146 u32 nss; 5147 u32 use_4addr; 5148 u32 membership; 5149 u32 use_fixed_power; 5150 u32 user_pos; 5151 u32 crit_proto_hint_enabled; 5152 u32 tx_fail_cnt_thr; 5153 u32 set_hw_retry_cts2s; 5154 u32 ibss_atim_win_len; 5155 u32 debug; 5156 u32 phymode; 5157 u32 dummy_var; 5158 }; 5159 5160 struct wmi_vdev_param_map { 5161 u32 rts_threshold; 5162 u32 fragmentation_threshold; 5163 u32 beacon_interval; 5164 u32 listen_interval; 5165 u32 multicast_rate; 5166 u32 mgmt_tx_rate; 5167 u32 slot_time; 5168 u32 preamble; 5169 u32 swba_time; 5170 u32 wmi_vdev_stats_update_period; 5171 u32 wmi_vdev_pwrsave_ageout_time; 5172 u32 wmi_vdev_host_swba_interval; 5173 u32 dtim_period; 5174 u32 wmi_vdev_oc_scheduler_air_time_limit; 5175 u32 wds; 5176 u32 atim_window; 5177 u32 bmiss_count_max; 5178 u32 bmiss_first_bcnt; 5179 u32 bmiss_final_bcnt; 5180 u32 feature_wmm; 5181 u32 chwidth; 5182 u32 chextoffset; 5183 u32 disable_htprotection; 5184 u32 sta_quickkickout; 5185 u32 mgmt_rate; 5186 u32 protection_mode; 5187 u32 fixed_rate; 5188 u32 sgi; 5189 u32 ldpc; 5190 u32 tx_stbc; 5191 u32 rx_stbc; 5192 u32 intra_bss_fwd; 5193 u32 def_keyid; 5194 u32 nss; 5195 u32 bcast_data_rate; 5196 u32 mcast_data_rate; 5197 u32 mcast_indicate; 5198 u32 dhcp_indicate; 5199 u32 unknown_dest_indicate; 5200 u32 ap_keepalive_min_idle_inactive_time_secs; 5201 u32 ap_keepalive_max_idle_inactive_time_secs; 5202 u32 ap_keepalive_max_unresponsive_time_secs; 5203 u32 ap_enable_nawds; 5204 u32 mcast2ucast_set; 5205 u32 enable_rtscts; 5206 u32 txbf; 5207 u32 packet_powersave; 5208 u32 drop_unencry; 5209 u32 tx_encap_type; 5210 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5211 u32 rc_num_retries; 5212 u32 cabq_maxdur; 5213 u32 mfptest_set; 5214 u32 rts_fixed_rate; 5215 u32 vht_sgimask; 5216 u32 vht80_ratemask; 5217 u32 early_rx_adjust_enable; 5218 u32 early_rx_tgt_bmiss_num; 5219 u32 early_rx_bmiss_sample_cycle; 5220 u32 early_rx_slop_step; 5221 u32 early_rx_init_slop; 5222 u32 early_rx_adjust_pause; 5223 u32 proxy_sta; 5224 u32 meru_vc; 5225 u32 rx_decap_type; 5226 u32 bw_nss_ratemask; 5227 u32 inc_tsf; 5228 u32 dec_tsf; 5229 u32 disable_4addr_src_lrn; 5230 u32 rtt_responder_role; 5231 }; 5232 5233 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5234 5235 /* the definition of different VDEV parameters */ 5236 enum wmi_vdev_param { 5237 /* RTS Threshold */ 5238 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5239 /* Fragmentation threshold */ 5240 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5241 /* beacon interval in TUs */ 5242 WMI_VDEV_PARAM_BEACON_INTERVAL, 5243 /* Listen interval in TUs */ 5244 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5245 /* multicast rate in Mbps */ 5246 WMI_VDEV_PARAM_MULTICAST_RATE, 5247 /* management frame rate in Mbps */ 5248 WMI_VDEV_PARAM_MGMT_TX_RATE, 5249 /* slot time (long vs short) */ 5250 WMI_VDEV_PARAM_SLOT_TIME, 5251 /* preamble (long vs short) */ 5252 WMI_VDEV_PARAM_PREAMBLE, 5253 /* SWBA time (time before tbtt in msec) */ 5254 WMI_VDEV_PARAM_SWBA_TIME, 5255 /* time period for updating VDEV stats */ 5256 WMI_VDEV_STATS_UPDATE_PERIOD, 5257 /* age out time in msec for frames queued for station in power save */ 5258 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5259 /* 5260 * Host SWBA interval (time in msec before tbtt for SWBA event 5261 * generation). 5262 */ 5263 WMI_VDEV_HOST_SWBA_INTERVAL, 5264 /* DTIM period (specified in units of num beacon intervals) */ 5265 WMI_VDEV_PARAM_DTIM_PERIOD, 5266 /* 5267 * scheduler air time limit for this VDEV. used by off chan 5268 * scheduler. 5269 */ 5270 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5271 /* enable/disable WDS for this VDEV */ 5272 WMI_VDEV_PARAM_WDS, 5273 /* ATIM Window */ 5274 WMI_VDEV_PARAM_ATIM_WINDOW, 5275 /* BMISS max */ 5276 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5277 /* BMISS first time */ 5278 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5279 /* BMISS final time */ 5280 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5281 /* WMM enables/disabled */ 5282 WMI_VDEV_PARAM_FEATURE_WMM, 5283 /* Channel width */ 5284 WMI_VDEV_PARAM_CHWIDTH, 5285 /* Channel Offset */ 5286 WMI_VDEV_PARAM_CHEXTOFFSET, 5287 /* Disable HT Protection */ 5288 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5289 /* Quick STA Kickout */ 5290 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5291 /* Rate to be used with Management frames */ 5292 WMI_VDEV_PARAM_MGMT_RATE, 5293 /* Protection Mode */ 5294 WMI_VDEV_PARAM_PROTECTION_MODE, 5295 /* Fixed rate setting */ 5296 WMI_VDEV_PARAM_FIXED_RATE, 5297 /* Short GI Enable/Disable */ 5298 WMI_VDEV_PARAM_SGI, 5299 /* Enable LDPC */ 5300 WMI_VDEV_PARAM_LDPC, 5301 /* Enable Tx STBC */ 5302 WMI_VDEV_PARAM_TX_STBC, 5303 /* Enable Rx STBC */ 5304 WMI_VDEV_PARAM_RX_STBC, 5305 /* Intra BSS forwarding */ 5306 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5307 /* Setting Default xmit key for Vdev */ 5308 WMI_VDEV_PARAM_DEF_KEYID, 5309 /* NSS width */ 5310 WMI_VDEV_PARAM_NSS, 5311 /* Set the custom rate for the broadcast data frames */ 5312 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5313 /* Set the custom rate (rate-code) for multicast data frames */ 5314 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5315 /* Tx multicast packet indicate Enable/Disable */ 5316 WMI_VDEV_PARAM_MCAST_INDICATE, 5317 /* Tx DHCP packet indicate Enable/Disable */ 5318 WMI_VDEV_PARAM_DHCP_INDICATE, 5319 /* Enable host inspection of Tx unicast packet to unknown destination */ 5320 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5321 5322 /* The minimum amount of time AP begins to consider STA inactive */ 5323 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5324 5325 /* 5326 * An associated STA is considered inactive when there is no recent 5327 * TX/RX activity and no downlink frames are buffered for it. Once a 5328 * STA exceeds the maximum idle inactive time, the AP will send an 5329 * 802.11 data-null as a keep alive to verify the STA is still 5330 * associated. If the STA does ACK the data-null, or if the data-null 5331 * is buffered and the STA does not retrieve it, the STA will be 5332 * considered unresponsive 5333 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5334 */ 5335 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5336 5337 /* 5338 * An associated STA is considered unresponsive if there is no recent 5339 * TX/RX activity and downlink frames are buffered for it. Once a STA 5340 * exceeds the maximum unresponsive time, the AP will send a 5341 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5342 */ 5343 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5344 5345 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5346 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5347 /* Enable/Disable RTS-CTS */ 5348 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5349 /* Enable TXBFee/er */ 5350 WMI_VDEV_PARAM_TXBF, 5351 5352 /* Set packet power save */ 5353 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5354 5355 /* 5356 * Drops un-encrypted packets if eceived in an encrypted connection 5357 * otherwise forwards to host. 5358 */ 5359 WMI_VDEV_PARAM_DROP_UNENCRY, 5360 5361 /* 5362 * Set the encapsulation type for frames. 5363 */ 5364 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5365 }; 5366 5367 /* the definition of different VDEV parameters */ 5368 enum wmi_10x_vdev_param { 5369 /* RTS Threshold */ 5370 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5371 /* Fragmentation threshold */ 5372 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5373 /* beacon interval in TUs */ 5374 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5375 /* Listen interval in TUs */ 5376 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5377 /* multicast rate in Mbps */ 5378 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5379 /* management frame rate in Mbps */ 5380 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5381 /* slot time (long vs short) */ 5382 WMI_10X_VDEV_PARAM_SLOT_TIME, 5383 /* preamble (long vs short) */ 5384 WMI_10X_VDEV_PARAM_PREAMBLE, 5385 /* SWBA time (time before tbtt in msec) */ 5386 WMI_10X_VDEV_PARAM_SWBA_TIME, 5387 /* time period for updating VDEV stats */ 5388 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5389 /* age out time in msec for frames queued for station in power save */ 5390 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5391 /* 5392 * Host SWBA interval (time in msec before tbtt for SWBA event 5393 * generation). 5394 */ 5395 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5396 /* DTIM period (specified in units of num beacon intervals) */ 5397 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5398 /* 5399 * scheduler air time limit for this VDEV. used by off chan 5400 * scheduler. 5401 */ 5402 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5403 /* enable/disable WDS for this VDEV */ 5404 WMI_10X_VDEV_PARAM_WDS, 5405 /* ATIM Window */ 5406 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5407 /* BMISS max */ 5408 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5409 /* WMM enables/disabled */ 5410 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5411 /* Channel width */ 5412 WMI_10X_VDEV_PARAM_CHWIDTH, 5413 /* Channel Offset */ 5414 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5415 /* Disable HT Protection */ 5416 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5417 /* Quick STA Kickout */ 5418 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5419 /* Rate to be used with Management frames */ 5420 WMI_10X_VDEV_PARAM_MGMT_RATE, 5421 /* Protection Mode */ 5422 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5423 /* Fixed rate setting */ 5424 WMI_10X_VDEV_PARAM_FIXED_RATE, 5425 /* Short GI Enable/Disable */ 5426 WMI_10X_VDEV_PARAM_SGI, 5427 /* Enable LDPC */ 5428 WMI_10X_VDEV_PARAM_LDPC, 5429 /* Enable Tx STBC */ 5430 WMI_10X_VDEV_PARAM_TX_STBC, 5431 /* Enable Rx STBC */ 5432 WMI_10X_VDEV_PARAM_RX_STBC, 5433 /* Intra BSS forwarding */ 5434 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5435 /* Setting Default xmit key for Vdev */ 5436 WMI_10X_VDEV_PARAM_DEF_KEYID, 5437 /* NSS width */ 5438 WMI_10X_VDEV_PARAM_NSS, 5439 /* Set the custom rate for the broadcast data frames */ 5440 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5441 /* Set the custom rate (rate-code) for multicast data frames */ 5442 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5443 /* Tx multicast packet indicate Enable/Disable */ 5444 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5445 /* Tx DHCP packet indicate Enable/Disable */ 5446 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5447 /* Enable host inspection of Tx unicast packet to unknown destination */ 5448 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5449 5450 /* The minimum amount of time AP begins to consider STA inactive */ 5451 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5452 5453 /* 5454 * An associated STA is considered inactive when there is no recent 5455 * TX/RX activity and no downlink frames are buffered for it. Once a 5456 * STA exceeds the maximum idle inactive time, the AP will send an 5457 * 802.11 data-null as a keep alive to verify the STA is still 5458 * associated. If the STA does ACK the data-null, or if the data-null 5459 * is buffered and the STA does not retrieve it, the STA will be 5460 * considered unresponsive 5461 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5462 */ 5463 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5464 5465 /* 5466 * An associated STA is considered unresponsive if there is no recent 5467 * TX/RX activity and downlink frames are buffered for it. Once a STA 5468 * exceeds the maximum unresponsive time, the AP will send a 5469 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5470 */ 5471 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5472 5473 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5474 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5475 5476 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5477 /* Enable/Disable RTS-CTS */ 5478 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5479 5480 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5481 5482 /* following are available as of firmware 10.2 */ 5483 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5484 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5485 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5486 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5487 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5488 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5489 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5490 }; 5491 5492 enum wmi_10_4_vdev_param { 5493 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5494 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5495 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5496 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5497 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5498 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5499 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5500 WMI_10_4_VDEV_PARAM_PREAMBLE, 5501 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5502 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5503 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5504 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5505 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5506 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5507 WMI_10_4_VDEV_PARAM_WDS, 5508 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5509 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5510 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5511 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5512 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5513 WMI_10_4_VDEV_PARAM_CHWIDTH, 5514 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5515 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5516 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5517 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5518 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5519 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5520 WMI_10_4_VDEV_PARAM_SGI, 5521 WMI_10_4_VDEV_PARAM_LDPC, 5522 WMI_10_4_VDEV_PARAM_TX_STBC, 5523 WMI_10_4_VDEV_PARAM_RX_STBC, 5524 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5525 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5526 WMI_10_4_VDEV_PARAM_NSS, 5527 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5528 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5529 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5530 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5531 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5532 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5533 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5534 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5535 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5536 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5537 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5538 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5539 WMI_10_4_VDEV_PARAM_TXBF, 5540 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5541 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5542 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5543 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5544 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5545 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5546 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5547 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5548 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5549 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5550 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5551 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5552 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5553 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5554 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5555 WMI_10_4_VDEV_PARAM_PROXY_STA, 5556 WMI_10_4_VDEV_PARAM_MERU_VC, 5557 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5558 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5559 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5560 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5561 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5562 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5563 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5564 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5565 WMI_10_4_VDEV_PARAM_RX_FILTER, 5566 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5567 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5568 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5569 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5570 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, 5571 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, 5572 WMI_10_4_VDEV_PARAM_NSS_VHT160, 5573 WMI_10_4_VDEV_PARAM_NSS_VHT80_80, 5574 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, 5575 WMI_10_4_VDEV_PARAM_DISABLE_CABQ, 5576 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, 5577 WMI_10_4_VDEV_PARAM_TX_POWER, 5578 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, 5579 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, 5580 }; 5581 5582 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 5583 5584 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5585 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5586 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5587 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5588 5589 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5590 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5591 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5592 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5593 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5594 5595 /* slot time long */ 5596 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5597 /* slot time short */ 5598 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5599 /* preablbe long */ 5600 #define WMI_VDEV_PREAMBLE_LONG 0x1 5601 /* preablbe short */ 5602 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5603 5604 enum wmi_start_event_param { 5605 WMI_VDEV_RESP_START_EVENT = 0, 5606 WMI_VDEV_RESP_RESTART_EVENT, 5607 }; 5608 5609 struct wmi_vdev_start_response_event { 5610 __le32 vdev_id; 5611 __le32 req_id; 5612 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5613 __le32 status; 5614 } __packed; 5615 5616 struct wmi_vdev_standby_req_event { 5617 /* unique id identifying the VDEV, generated by the caller */ 5618 __le32 vdev_id; 5619 } __packed; 5620 5621 struct wmi_vdev_resume_req_event { 5622 /* unique id identifying the VDEV, generated by the caller */ 5623 __le32 vdev_id; 5624 } __packed; 5625 5626 struct wmi_vdev_stopped_event { 5627 /* unique id identifying the VDEV, generated by the caller */ 5628 __le32 vdev_id; 5629 } __packed; 5630 5631 /* 5632 * common structure used for simple events 5633 * (stopped, resume_req, standby response) 5634 */ 5635 struct wmi_vdev_simple_event { 5636 /* unique id identifying the VDEV, generated by the caller */ 5637 __le32 vdev_id; 5638 } __packed; 5639 5640 /* VDEV start response status codes */ 5641 /* VDEV successfully started */ 5642 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5643 5644 /* requested VDEV not found */ 5645 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5646 5647 /* unsupported VDEV combination */ 5648 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5649 5650 /* TODO: please add more comments if you have in-depth information */ 5651 struct wmi_vdev_spectral_conf_cmd { 5652 __le32 vdev_id; 5653 5654 /* number of fft samples to send (0 for infinite) */ 5655 __le32 scan_count; 5656 __le32 scan_period; 5657 __le32 scan_priority; 5658 5659 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5660 __le32 scan_fft_size; 5661 __le32 scan_gc_ena; 5662 __le32 scan_restart_ena; 5663 __le32 scan_noise_floor_ref; 5664 __le32 scan_init_delay; 5665 __le32 scan_nb_tone_thr; 5666 __le32 scan_str_bin_thr; 5667 __le32 scan_wb_rpt_mode; 5668 __le32 scan_rssi_rpt_mode; 5669 __le32 scan_rssi_thr; 5670 __le32 scan_pwr_format; 5671 5672 /* rpt_mode: Format of FFT report to software for spectral scan 5673 * triggered FFTs: 5674 * 0: No FFT report (only spectral scan summary report) 5675 * 1: 2-dword summary of metrics for each completed FFT + spectral 5676 * scan summary report 5677 * 2: 2-dword summary of metrics for each completed FFT + 5678 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5679 * report 5680 * 3: 2-dword summary of metrics for each completed FFT + 5681 * 2x- oversampled bins (all) per FFT + spectral scan summary 5682 */ 5683 __le32 scan_rpt_mode; 5684 __le32 scan_bin_scale; 5685 __le32 scan_dbm_adj; 5686 __le32 scan_chn_mask; 5687 } __packed; 5688 5689 struct wmi_vdev_spectral_conf_arg { 5690 u32 vdev_id; 5691 u32 scan_count; 5692 u32 scan_period; 5693 u32 scan_priority; 5694 u32 scan_fft_size; 5695 u32 scan_gc_ena; 5696 u32 scan_restart_ena; 5697 u32 scan_noise_floor_ref; 5698 u32 scan_init_delay; 5699 u32 scan_nb_tone_thr; 5700 u32 scan_str_bin_thr; 5701 u32 scan_wb_rpt_mode; 5702 u32 scan_rssi_rpt_mode; 5703 u32 scan_rssi_thr; 5704 u32 scan_pwr_format; 5705 u32 scan_rpt_mode; 5706 u32 scan_bin_scale; 5707 u32 scan_dbm_adj; 5708 u32 scan_chn_mask; 5709 }; 5710 5711 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5712 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5713 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5714 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5715 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5716 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5717 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5718 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5719 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5720 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5721 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5722 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5723 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5724 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5725 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5726 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5727 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5728 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5729 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5730 5731 struct wmi_vdev_spectral_enable_cmd { 5732 __le32 vdev_id; 5733 __le32 trigger_cmd; 5734 __le32 enable_cmd; 5735 } __packed; 5736 5737 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5738 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5739 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5740 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5741 5742 /* Beacon processing related command and event structures */ 5743 struct wmi_bcn_tx_hdr { 5744 __le32 vdev_id; 5745 __le32 tx_rate; 5746 __le32 tx_power; 5747 __le32 bcn_len; 5748 } __packed; 5749 5750 struct wmi_bcn_tx_cmd { 5751 struct wmi_bcn_tx_hdr hdr; 5752 u8 *bcn[]; 5753 } __packed; 5754 5755 struct wmi_bcn_tx_arg { 5756 u32 vdev_id; 5757 u32 tx_rate; 5758 u32 tx_power; 5759 u32 bcn_len; 5760 const void *bcn; 5761 }; 5762 5763 enum wmi_bcn_tx_ref_flags { 5764 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5765 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5766 }; 5767 5768 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5769 * chainmask yields no beacons on the air at all. 5770 */ 5771 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5772 5773 struct wmi_bcn_tx_ref_cmd { 5774 __le32 vdev_id; 5775 __le32 data_len; 5776 /* physical address of the frame - dma pointer */ 5777 __le32 data_ptr; 5778 /* id for host to track */ 5779 __le32 msdu_id; 5780 /* frame ctrl to setup PPDU desc */ 5781 __le32 frame_control; 5782 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5783 __le32 flags; 5784 /* introduced in 10.2 */ 5785 __le32 antenna_mask; 5786 } __packed; 5787 5788 /* Beacon filter */ 5789 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5790 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5791 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5792 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5793 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5794 5795 struct wmi_bcn_filter_rx_cmd { 5796 /* Filter ID */ 5797 __le32 bcn_filter_id; 5798 /* Filter type - wmi_bcn_filter */ 5799 __le32 bcn_filter; 5800 /* Buffer len */ 5801 __le32 bcn_filter_len; 5802 /* Filter info (threshold, BSSID, RSSI) */ 5803 u8 *bcn_filter_buf; 5804 } __packed; 5805 5806 /* Capabilities and IEs to be passed to firmware */ 5807 struct wmi_bcn_prb_info { 5808 /* Capabilities */ 5809 __le32 caps; 5810 /* ERP info */ 5811 __le32 erp; 5812 /* Advanced capabilities */ 5813 /* HT capabilities */ 5814 /* HT Info */ 5815 /* ibss_dfs */ 5816 /* wpa Info */ 5817 /* rsn Info */ 5818 /* rrm info */ 5819 /* ath_ext */ 5820 /* app IE */ 5821 } __packed; 5822 5823 enum wmi_sta_ps_mode { 5824 /* enable power save for the given STA VDEV */ 5825 WMI_STA_PS_MODE_DISABLED = 0, 5826 /* disable power save for a given STA VDEV */ 5827 WMI_STA_PS_MODE_ENABLED = 1, 5828 }; 5829 5830 struct wmi_sta_powersave_mode_cmd { 5831 /* unique id identifying the VDEV, generated by the caller */ 5832 __le32 vdev_id; 5833 5834 /* 5835 * Power save mode 5836 * (see enum wmi_sta_ps_mode) 5837 */ 5838 __le32 sta_ps_mode; 5839 } __packed; 5840 5841 enum wmi_csa_offload_en { 5842 WMI_CSA_OFFLOAD_DISABLE = 0, 5843 WMI_CSA_OFFLOAD_ENABLE = 1, 5844 }; 5845 5846 struct wmi_csa_offload_enable_cmd { 5847 __le32 vdev_id; 5848 __le32 csa_offload_enable; 5849 } __packed; 5850 5851 struct wmi_csa_offload_chanswitch_cmd { 5852 __le32 vdev_id; 5853 struct wmi_channel chan; 5854 } __packed; 5855 5856 /* 5857 * This parameter controls the policy for retrieving frames from AP while the 5858 * STA is in sleep state. 5859 * 5860 * Only takes affect if the sta_ps_mode is enabled 5861 */ 5862 enum wmi_sta_ps_param_rx_wake_policy { 5863 /* 5864 * Wake up when ever there is an RX activity on the VDEV. In this mode 5865 * the Power save SM(state machine) will come out of sleep by either 5866 * sending null frame (or) a data frame (with PS==0) in response to TIM 5867 * bit set in the received beacon frame from AP. 5868 */ 5869 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5870 5871 /* 5872 * Here the power save state machine will not wakeup in response to TIM 5873 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5874 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5875 * access categories are delivery-enabled, the station will send a 5876 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5877 */ 5878 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5879 }; 5880 5881 /* 5882 * Number of tx frames/beacon that cause the power save SM to wake up. 5883 * 5884 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5885 * meaning, It will cause the SM to never wake up. This is useful if you want 5886 * to keep the system to sleep all the time for some kind of test mode . host 5887 * can change this parameter any time. It will affect at the next tx frame. 5888 */ 5889 enum wmi_sta_ps_param_tx_wake_threshold { 5890 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5891 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5892 5893 /* 5894 * Values greater than one indicate that many TX attempts per beacon 5895 * interval before the STA will wake up 5896 */ 5897 }; 5898 5899 /* 5900 * The maximum number of PS-Poll frames the FW will send in response to 5901 * traffic advertised in TIM before waking up (by sending a null frame with PS 5902 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5903 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5904 * parameter is used when the RX wake policy is 5905 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5906 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5907 */ 5908 enum wmi_sta_ps_param_pspoll_count { 5909 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5910 /* 5911 * Values greater than 0 indicate the maximum number of PS-Poll frames 5912 * FW will send before waking up. 5913 */ 5914 5915 /* When u-APSD is enabled the firmware will be very reluctant to exit 5916 * STA PS. This could result in very poor Rx performance with STA doing 5917 * PS-Poll for each and every buffered frame. This value is a bit 5918 * arbitrary. 5919 */ 5920 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5921 }; 5922 5923 /* 5924 * This will include the delivery and trigger enabled state for every AC. 5925 * This is the negotiated state with AP. The host MLME needs to set this based 5926 * on AP capability and the state Set in the association request by the 5927 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5928 */ 5929 #define WMI_UAPSD_AC_TYPE_DELI 0 5930 #define WMI_UAPSD_AC_TYPE_TRIG 1 5931 5932 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5933 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5934 5935 enum wmi_sta_ps_param_uapsd { 5936 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5937 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5938 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5939 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5940 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5941 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5942 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5943 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5944 }; 5945 5946 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5947 5948 struct wmi_sta_uapsd_auto_trig_param { 5949 __le32 wmm_ac; 5950 __le32 user_priority; 5951 __le32 service_interval; 5952 __le32 suspend_interval; 5953 __le32 delay_interval; 5954 }; 5955 5956 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5957 __le32 vdev_id; 5958 struct wmi_mac_addr peer_macaddr; 5959 __le32 num_ac; 5960 }; 5961 5962 struct wmi_sta_uapsd_auto_trig_arg { 5963 u32 wmm_ac; 5964 u32 user_priority; 5965 u32 service_interval; 5966 u32 suspend_interval; 5967 u32 delay_interval; 5968 }; 5969 5970 enum wmi_sta_powersave_param { 5971 /* 5972 * Controls how frames are retrievd from AP while STA is sleeping 5973 * 5974 * (see enum wmi_sta_ps_param_rx_wake_policy) 5975 */ 5976 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5977 5978 /* 5979 * The STA will go active after this many TX 5980 * 5981 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5982 */ 5983 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5984 5985 /* 5986 * Number of PS-Poll to send before STA wakes up 5987 * 5988 * (see enum wmi_sta_ps_param_pspoll_count) 5989 * 5990 */ 5991 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5992 5993 /* 5994 * TX/RX inactivity time in msec before going to sleep. 5995 * 5996 * The power save SM will monitor tx/rx activity on the VDEV, if no 5997 * activity for the specified msec of the parameter the Power save 5998 * SM will go to sleep. 5999 */ 6000 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 6001 6002 /* 6003 * Set uapsd configuration. 6004 * 6005 * (see enum wmi_sta_ps_param_uapsd) 6006 */ 6007 WMI_STA_PS_PARAM_UAPSD = 4, 6008 }; 6009 6010 struct wmi_sta_powersave_param_cmd { 6011 __le32 vdev_id; 6012 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 6013 __le32 param_value; 6014 } __packed; 6015 6016 /* No MIMO power save */ 6017 #define WMI_STA_MIMO_PS_MODE_DISABLE 6018 /* mimo powersave mode static*/ 6019 #define WMI_STA_MIMO_PS_MODE_STATIC 6020 /* mimo powersave mode dynamic */ 6021 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 6022 6023 struct wmi_sta_mimo_ps_mode_cmd { 6024 /* unique id identifying the VDEV, generated by the caller */ 6025 __le32 vdev_id; 6026 /* mimo powersave mode as defined above */ 6027 __le32 mimo_pwrsave_mode; 6028 } __packed; 6029 6030 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 6031 enum wmi_ap_ps_param_uapsd { 6032 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 6033 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 6034 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 6035 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 6036 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 6037 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 6038 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6039 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6040 }; 6041 6042 /* U-APSD maximum service period of peer station */ 6043 enum wmi_ap_ps_peer_param_max_sp { 6044 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 6045 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 6046 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 6047 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 6048 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 6049 }; 6050 6051 /* 6052 * AP power save parameter 6053 * Set a power save specific parameter for a peer station 6054 */ 6055 enum wmi_ap_ps_peer_param { 6056 /* Set uapsd configuration for a given peer. 6057 * 6058 * Include the delivery and trigger enabled state for every AC. 6059 * The host MLME needs to set this based on AP capability and stations 6060 * request Set in the association request received from the station. 6061 * 6062 * Lower 8 bits of the value specify the UAPSD configuration. 6063 * 6064 * (see enum wmi_ap_ps_param_uapsd) 6065 * The default value is 0. 6066 */ 6067 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 6068 6069 /* 6070 * Set the service period for a UAPSD capable station 6071 * 6072 * The service period from wme ie in the (re)assoc request frame. 6073 * 6074 * (see enum wmi_ap_ps_peer_param_max_sp) 6075 */ 6076 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 6077 6078 /* Time in seconds for aging out buffered frames for STA in PS */ 6079 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6080 }; 6081 6082 struct wmi_ap_ps_peer_cmd { 6083 /* unique id identifying the VDEV, generated by the caller */ 6084 __le32 vdev_id; 6085 6086 /* peer MAC address */ 6087 struct wmi_mac_addr peer_macaddr; 6088 6089 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 6090 __le32 param_id; 6091 6092 /* AP powersave param value */ 6093 __le32 param_value; 6094 } __packed; 6095 6096 /* 128 clients = 4 words */ 6097 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 6098 6099 struct wmi_tim_info { 6100 __le32 tim_len; 6101 __le32 tim_mcast; 6102 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 6103 __le32 tim_changed; 6104 __le32 tim_num_ps_pending; 6105 } __packed; 6106 6107 struct wmi_tim_info_arg { 6108 __le32 tim_len; 6109 __le32 tim_mcast; 6110 const __le32 *tim_bitmap; 6111 __le32 tim_changed; 6112 __le32 tim_num_ps_pending; 6113 } __packed; 6114 6115 /* Maximum number of NOA Descriptors supported */ 6116 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 6117 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 6118 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 6119 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 6120 6121 struct wmi_p2p_noa_info { 6122 /* Bit 0 - Flag to indicate an update in NOA schedule 6123 * Bits 7-1 - Reserved 6124 */ 6125 u8 changed; 6126 /* NOA index */ 6127 u8 index; 6128 /* Bit 0 - Opp PS state of the AP 6129 * Bits 1-7 - Ctwindow in TUs 6130 */ 6131 u8 ctwindow_oppps; 6132 /* Number of NOA descriptors */ 6133 u8 num_descriptors; 6134 6135 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 6136 } __packed; 6137 6138 struct wmi_bcn_info { 6139 struct wmi_tim_info tim_info; 6140 struct wmi_p2p_noa_info p2p_noa_info; 6141 } __packed; 6142 6143 struct wmi_host_swba_event { 6144 __le32 vdev_map; 6145 struct wmi_bcn_info bcn_info[]; 6146 } __packed; 6147 6148 struct wmi_10_2_4_bcn_info { 6149 struct wmi_tim_info tim_info; 6150 /* The 10.2.4 FW doesn't have p2p NOA info */ 6151 } __packed; 6152 6153 struct wmi_10_2_4_host_swba_event { 6154 __le32 vdev_map; 6155 struct wmi_10_2_4_bcn_info bcn_info[]; 6156 } __packed; 6157 6158 /* 16 words = 512 client + 1 word = for guard */ 6159 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6160 6161 struct wmi_10_4_tim_info { 6162 __le32 tim_len; 6163 __le32 tim_mcast; 6164 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6165 __le32 tim_changed; 6166 __le32 tim_num_ps_pending; 6167 } __packed; 6168 6169 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6170 6171 struct wmi_10_4_p2p_noa_info { 6172 /* Bit 0 - Flag to indicate an update in NOA schedule 6173 * Bits 7-1 - Reserved 6174 */ 6175 u8 changed; 6176 /* NOA index */ 6177 u8 index; 6178 /* Bit 0 - Opp PS state of the AP 6179 * Bits 1-7 - Ctwindow in TUs 6180 */ 6181 u8 ctwindow_oppps; 6182 /* Number of NOA descriptors */ 6183 u8 num_descriptors; 6184 6185 struct wmi_p2p_noa_descriptor 6186 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6187 } __packed; 6188 6189 struct wmi_10_4_bcn_info { 6190 struct wmi_10_4_tim_info tim_info; 6191 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6192 } __packed; 6193 6194 struct wmi_10_4_host_swba_event { 6195 __le32 vdev_map; 6196 struct wmi_10_4_bcn_info bcn_info[]; 6197 } __packed; 6198 6199 #define WMI_MAX_AP_VDEV 16 6200 6201 struct wmi_tbtt_offset_event { 6202 __le32 vdev_map; 6203 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6204 } __packed; 6205 6206 struct wmi_peer_create_cmd { 6207 __le32 vdev_id; 6208 struct wmi_mac_addr peer_macaddr; 6209 __le32 peer_type; 6210 } __packed; 6211 6212 enum wmi_peer_type { 6213 WMI_PEER_TYPE_DEFAULT = 0, 6214 WMI_PEER_TYPE_BSS = 1, 6215 WMI_PEER_TYPE_TDLS = 2, 6216 }; 6217 6218 struct wmi_peer_delete_cmd { 6219 __le32 vdev_id; 6220 struct wmi_mac_addr peer_macaddr; 6221 } __packed; 6222 6223 struct wmi_peer_flush_tids_cmd { 6224 __le32 vdev_id; 6225 struct wmi_mac_addr peer_macaddr; 6226 __le32 peer_tid_bitmap; 6227 } __packed; 6228 6229 struct wmi_fixed_rate { 6230 /* 6231 * rate mode . 0: disable fixed rate (auto rate) 6232 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6233 * 2: ht20 11n rate specified as mcs index 6234 * 3: ht40 11n rate specified as mcs index 6235 */ 6236 __le32 rate_mode; 6237 /* 6238 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6239 * and series 3 is stored at byte 3 (MSB) 6240 */ 6241 __le32 rate_series; 6242 /* 6243 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6244 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6245 * (MSB) 6246 */ 6247 __le32 rate_retries; 6248 } __packed; 6249 6250 struct wmi_peer_fixed_rate_cmd { 6251 /* unique id identifying the VDEV, generated by the caller */ 6252 __le32 vdev_id; 6253 /* peer MAC address */ 6254 struct wmi_mac_addr peer_macaddr; 6255 /* fixed rate */ 6256 struct wmi_fixed_rate peer_fixed_rate; 6257 } __packed; 6258 6259 #define WMI_MGMT_TID 17 6260 6261 struct wmi_addba_clear_resp_cmd { 6262 /* unique id identifying the VDEV, generated by the caller */ 6263 __le32 vdev_id; 6264 /* peer MAC address */ 6265 struct wmi_mac_addr peer_macaddr; 6266 } __packed; 6267 6268 struct wmi_addba_send_cmd { 6269 /* unique id identifying the VDEV, generated by the caller */ 6270 __le32 vdev_id; 6271 /* peer MAC address */ 6272 struct wmi_mac_addr peer_macaddr; 6273 /* Tid number */ 6274 __le32 tid; 6275 /* Buffer/Window size*/ 6276 __le32 buffersize; 6277 } __packed; 6278 6279 struct wmi_delba_send_cmd { 6280 /* unique id identifying the VDEV, generated by the caller */ 6281 __le32 vdev_id; 6282 /* peer MAC address */ 6283 struct wmi_mac_addr peer_macaddr; 6284 /* Tid number */ 6285 __le32 tid; 6286 /* Is Initiator */ 6287 __le32 initiator; 6288 /* Reason code */ 6289 __le32 reasoncode; 6290 } __packed; 6291 6292 struct wmi_addba_setresponse_cmd { 6293 /* unique id identifying the vdev, generated by the caller */ 6294 __le32 vdev_id; 6295 /* peer mac address */ 6296 struct wmi_mac_addr peer_macaddr; 6297 /* Tid number */ 6298 __le32 tid; 6299 /* status code */ 6300 __le32 statuscode; 6301 } __packed; 6302 6303 struct wmi_send_singleamsdu_cmd { 6304 /* unique id identifying the vdev, generated by the caller */ 6305 __le32 vdev_id; 6306 /* peer mac address */ 6307 struct wmi_mac_addr peer_macaddr; 6308 /* Tid number */ 6309 __le32 tid; 6310 } __packed; 6311 6312 enum wmi_peer_smps_state { 6313 WMI_PEER_SMPS_PS_NONE = 0x0, 6314 WMI_PEER_SMPS_STATIC = 0x1, 6315 WMI_PEER_SMPS_DYNAMIC = 0x2 6316 }; 6317 6318 enum wmi_peer_chwidth { 6319 WMI_PEER_CHWIDTH_20MHZ = 0, 6320 WMI_PEER_CHWIDTH_40MHZ = 1, 6321 WMI_PEER_CHWIDTH_80MHZ = 2, 6322 WMI_PEER_CHWIDTH_160MHZ = 3, 6323 }; 6324 6325 enum wmi_peer_param { 6326 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6327 WMI_PEER_AMPDU = 0x2, 6328 WMI_PEER_AUTHORIZE = 0x3, 6329 WMI_PEER_CHAN_WIDTH = 0x4, 6330 WMI_PEER_NSS = 0x5, 6331 WMI_PEER_USE_4ADDR = 0x6, 6332 WMI_PEER_USE_FIXED_PWR = 0x8, 6333 WMI_PEER_PARAM_FIXED_RATE = 0x9, 6334 WMI_PEER_DEBUG = 0xa, 6335 WMI_PEER_PHYMODE = 0xd, 6336 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6337 }; 6338 6339 struct wmi_peer_set_param_cmd { 6340 __le32 vdev_id; 6341 struct wmi_mac_addr peer_macaddr; 6342 __le32 param_id; 6343 __le32 param_value; 6344 } __packed; 6345 6346 #define MAX_SUPPORTED_RATES 128 6347 6348 struct wmi_rate_set { 6349 /* total number of rates */ 6350 __le32 num_rates; 6351 /* 6352 * rates (each 8bit value) packed into a 32 bit word. 6353 * the rates are filled from least significant byte to most 6354 * significant byte. 6355 */ 6356 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6357 } __packed; 6358 6359 struct wmi_rate_set_arg { 6360 unsigned int num_rates; 6361 u8 rates[MAX_SUPPORTED_RATES]; 6362 }; 6363 6364 /* 6365 * NOTE: It would bea good idea to represent the Tx MCS 6366 * info in one word and Rx in another word. This is split 6367 * into multiple words for convenience 6368 */ 6369 struct wmi_vht_rate_set { 6370 __le32 rx_max_rate; /* Max Rx data rate */ 6371 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6372 __le32 tx_max_rate; /* Max Tx data rate */ 6373 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6374 } __packed; 6375 6376 struct wmi_vht_rate_set_arg { 6377 u32 rx_max_rate; 6378 u32 rx_mcs_set; 6379 u32 tx_max_rate; 6380 u32 tx_mcs_set; 6381 }; 6382 6383 struct wmi_peer_set_rates_cmd { 6384 /* peer MAC address */ 6385 struct wmi_mac_addr peer_macaddr; 6386 /* legacy rate set */ 6387 struct wmi_rate_set peer_legacy_rates; 6388 /* ht rate set */ 6389 struct wmi_rate_set peer_ht_rates; 6390 } __packed; 6391 6392 struct wmi_peer_set_q_empty_callback_cmd { 6393 /* unique id identifying the VDEV, generated by the caller */ 6394 __le32 vdev_id; 6395 /* peer MAC address */ 6396 struct wmi_mac_addr peer_macaddr; 6397 __le32 callback_enable; 6398 } __packed; 6399 6400 struct wmi_peer_flags_map { 6401 u32 auth; 6402 u32 qos; 6403 u32 need_ptk_4_way; 6404 u32 need_gtk_2_way; 6405 u32 apsd; 6406 u32 ht; 6407 u32 bw40; 6408 u32 stbc; 6409 u32 ldbc; 6410 u32 dyn_mimops; 6411 u32 static_mimops; 6412 u32 spatial_mux; 6413 u32 vht; 6414 u32 bw80; 6415 u32 vht_2g; 6416 u32 pmf; 6417 u32 bw160; 6418 }; 6419 6420 enum wmi_peer_flags { 6421 WMI_PEER_AUTH = 0x00000001, 6422 WMI_PEER_QOS = 0x00000002, 6423 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6424 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6425 WMI_PEER_APSD = 0x00000800, 6426 WMI_PEER_HT = 0x00001000, 6427 WMI_PEER_40MHZ = 0x00002000, 6428 WMI_PEER_STBC = 0x00008000, 6429 WMI_PEER_LDPC = 0x00010000, 6430 WMI_PEER_DYN_MIMOPS = 0x00020000, 6431 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6432 WMI_PEER_SPATIAL_MUX = 0x00200000, 6433 WMI_PEER_VHT = 0x02000000, 6434 WMI_PEER_80MHZ = 0x04000000, 6435 WMI_PEER_VHT_2G = 0x08000000, 6436 WMI_PEER_PMF = 0x10000000, 6437 WMI_PEER_160MHZ = 0x20000000 6438 }; 6439 6440 enum wmi_10x_peer_flags { 6441 WMI_10X_PEER_AUTH = 0x00000001, 6442 WMI_10X_PEER_QOS = 0x00000002, 6443 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6444 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6445 WMI_10X_PEER_APSD = 0x00000800, 6446 WMI_10X_PEER_HT = 0x00001000, 6447 WMI_10X_PEER_40MHZ = 0x00002000, 6448 WMI_10X_PEER_STBC = 0x00008000, 6449 WMI_10X_PEER_LDPC = 0x00010000, 6450 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6451 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6452 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6453 WMI_10X_PEER_VHT = 0x02000000, 6454 WMI_10X_PEER_80MHZ = 0x04000000, 6455 WMI_10X_PEER_160MHZ = 0x20000000 6456 }; 6457 6458 enum wmi_10_2_peer_flags { 6459 WMI_10_2_PEER_AUTH = 0x00000001, 6460 WMI_10_2_PEER_QOS = 0x00000002, 6461 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6462 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6463 WMI_10_2_PEER_APSD = 0x00000800, 6464 WMI_10_2_PEER_HT = 0x00001000, 6465 WMI_10_2_PEER_40MHZ = 0x00002000, 6466 WMI_10_2_PEER_STBC = 0x00008000, 6467 WMI_10_2_PEER_LDPC = 0x00010000, 6468 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6469 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6470 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6471 WMI_10_2_PEER_VHT = 0x02000000, 6472 WMI_10_2_PEER_80MHZ = 0x04000000, 6473 WMI_10_2_PEER_VHT_2G = 0x08000000, 6474 WMI_10_2_PEER_PMF = 0x10000000, 6475 WMI_10_2_PEER_160MHZ = 0x20000000 6476 }; 6477 6478 /* 6479 * Peer rate capabilities. 6480 * 6481 * This is of interest to the ratecontrol 6482 * module which resides in the firmware. The bit definitions are 6483 * consistent with that defined in if_athrate.c. 6484 */ 6485 #define WMI_RC_DS_FLAG 0x01 6486 #define WMI_RC_CW40_FLAG 0x02 6487 #define WMI_RC_SGI_FLAG 0x04 6488 #define WMI_RC_HT_FLAG 0x08 6489 #define WMI_RC_RTSCTS_FLAG 0x10 6490 #define WMI_RC_TX_STBC_FLAG 0x20 6491 #define WMI_RC_RX_STBC_FLAG 0xC0 6492 #define WMI_RC_RX_STBC_FLAG_S 6 6493 #define WMI_RC_WEP_TKIP_FLAG 0x100 6494 #define WMI_RC_TS_FLAG 0x200 6495 #define WMI_RC_UAPSD_FLAG 0x400 6496 6497 /* Maximum listen interval supported by hw in units of beacon interval */ 6498 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6499 6500 struct wmi_common_peer_assoc_complete_cmd { 6501 struct wmi_mac_addr peer_macaddr; 6502 __le32 vdev_id; 6503 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6504 __le32 peer_associd; /* 16 LSBs */ 6505 __le32 peer_flags; 6506 __le32 peer_caps; /* 16 LSBs */ 6507 __le32 peer_listen_intval; 6508 __le32 peer_ht_caps; 6509 __le32 peer_max_mpdu; 6510 __le32 peer_mpdu_density; /* 0..16 */ 6511 __le32 peer_rate_caps; 6512 struct wmi_rate_set peer_legacy_rates; 6513 struct wmi_rate_set peer_ht_rates; 6514 __le32 peer_nss; /* num of spatial streams */ 6515 __le32 peer_vht_caps; 6516 __le32 peer_phymode; 6517 struct wmi_vht_rate_set peer_vht_rates; 6518 }; 6519 6520 struct wmi_main_peer_assoc_complete_cmd { 6521 struct wmi_common_peer_assoc_complete_cmd cmd; 6522 6523 /* HT Operation Element of the peer. Five bytes packed in 2 6524 * INT32 array and filled from lsb to msb. 6525 */ 6526 __le32 peer_ht_info[2]; 6527 } __packed; 6528 6529 struct wmi_10_1_peer_assoc_complete_cmd { 6530 struct wmi_common_peer_assoc_complete_cmd cmd; 6531 } __packed; 6532 6533 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6534 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6535 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6536 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6537 6538 struct wmi_10_2_peer_assoc_complete_cmd { 6539 struct wmi_common_peer_assoc_complete_cmd cmd; 6540 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6541 } __packed; 6542 6543 /* NSS Mapping to FW */ 6544 #define WMI_PEER_NSS_MAP_ENABLE BIT(31) 6545 #define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0) 6546 #define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3) 6547 6548 struct wmi_10_4_peer_assoc_complete_cmd { 6549 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6550 __le32 peer_bw_rxnss_override; 6551 } __packed; 6552 6553 struct wmi_peer_assoc_complete_arg { 6554 u8 addr[ETH_ALEN]; 6555 u32 vdev_id; 6556 bool peer_reassoc; 6557 u16 peer_aid; 6558 u32 peer_flags; /* see %WMI_PEER_ */ 6559 u16 peer_caps; 6560 u32 peer_listen_intval; 6561 u32 peer_ht_caps; 6562 u32 peer_max_mpdu; 6563 u32 peer_mpdu_density; /* 0..16 */ 6564 u32 peer_rate_caps; /* see %WMI_RC_ */ 6565 struct wmi_rate_set_arg peer_legacy_rates; 6566 struct wmi_rate_set_arg peer_ht_rates; 6567 u32 peer_num_spatial_streams; 6568 u32 peer_vht_caps; 6569 enum wmi_phy_mode peer_phymode; 6570 struct wmi_vht_rate_set_arg peer_vht_rates; 6571 u32 peer_bw_rxnss_override; 6572 }; 6573 6574 struct wmi_peer_add_wds_entry_cmd { 6575 /* peer MAC address */ 6576 struct wmi_mac_addr peer_macaddr; 6577 /* wds MAC addr */ 6578 struct wmi_mac_addr wds_macaddr; 6579 } __packed; 6580 6581 struct wmi_peer_remove_wds_entry_cmd { 6582 /* wds MAC addr */ 6583 struct wmi_mac_addr wds_macaddr; 6584 } __packed; 6585 6586 struct wmi_peer_q_empty_callback_event { 6587 /* peer MAC address */ 6588 struct wmi_mac_addr peer_macaddr; 6589 } __packed; 6590 6591 /* 6592 * Channel info WMI event 6593 */ 6594 struct wmi_chan_info_event { 6595 __le32 err_code; 6596 __le32 freq; 6597 __le32 cmd_flags; 6598 __le32 noise_floor; 6599 __le32 rx_clear_count; 6600 __le32 cycle_count; 6601 } __packed; 6602 6603 struct wmi_10_4_chan_info_event { 6604 __le32 err_code; 6605 __le32 freq; 6606 __le32 cmd_flags; 6607 __le32 noise_floor; 6608 __le32 rx_clear_count; 6609 __le32 cycle_count; 6610 __le32 chan_tx_pwr_range; 6611 __le32 chan_tx_pwr_tp; 6612 __le32 rx_frame_count; 6613 } __packed; 6614 6615 struct wmi_peer_sta_kickout_event { 6616 struct wmi_mac_addr peer_macaddr; 6617 } __packed; 6618 6619 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6620 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6621 6622 /* Beacon filter wmi command info */ 6623 #define BCN_FLT_MAX_SUPPORTED_IES 256 6624 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6625 6626 struct bss_bcn_stats { 6627 __le32 vdev_id; 6628 __le32 bss_bcnsdropped; 6629 __le32 bss_bcnsdelivered; 6630 } __packed; 6631 6632 struct bcn_filter_stats { 6633 __le32 bcns_dropped; 6634 __le32 bcns_delivered; 6635 __le32 activefilters; 6636 struct bss_bcn_stats bss_stats; 6637 } __packed; 6638 6639 struct wmi_add_bcn_filter_cmd { 6640 u32 vdev_id; 6641 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6642 } __packed; 6643 6644 enum wmi_sta_keepalive_method { 6645 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6646 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6647 }; 6648 6649 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6650 6651 /* Firmware crashes if keepalive interval exceeds this limit */ 6652 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6653 6654 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6655 struct wmi_sta_keepalive_arp_resp { 6656 __be32 src_ip4_addr; 6657 __be32 dest_ip4_addr; 6658 struct wmi_mac_addr dest_mac_addr; 6659 } __packed; 6660 6661 struct wmi_sta_keepalive_cmd { 6662 __le32 vdev_id; 6663 __le32 enabled; 6664 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6665 __le32 interval; /* in seconds */ 6666 struct wmi_sta_keepalive_arp_resp arp_resp; 6667 } __packed; 6668 6669 struct wmi_sta_keepalive_arg { 6670 u32 vdev_id; 6671 u32 enabled; 6672 u32 method; 6673 u32 interval; 6674 __be32 src_ip4_addr; 6675 __be32 dest_ip4_addr; 6676 const u8 dest_mac_addr[ETH_ALEN]; 6677 }; 6678 6679 enum wmi_force_fw_hang_type { 6680 WMI_FORCE_FW_HANG_ASSERT = 1, 6681 WMI_FORCE_FW_HANG_NO_DETECT, 6682 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6683 WMI_FORCE_FW_HANG_EMPTY_POINT, 6684 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6685 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6686 }; 6687 6688 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6689 6690 struct wmi_force_fw_hang_cmd { 6691 __le32 type; 6692 __le32 delay_ms; 6693 } __packed; 6694 6695 enum wmi_pdev_reset_mode_type { 6696 WMI_RST_MODE_TX_FLUSH = 1, 6697 WMI_RST_MODE_WARM_RESET, 6698 WMI_RST_MODE_COLD_RESET, 6699 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6700 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6701 WMI_RST_MODE_MAX, 6702 }; 6703 6704 enum ath10k_dbglog_level { 6705 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6706 ATH10K_DBGLOG_LEVEL_INFO = 1, 6707 ATH10K_DBGLOG_LEVEL_WARN = 2, 6708 ATH10K_DBGLOG_LEVEL_ERR = 3, 6709 }; 6710 6711 /* VAP ids to enable dbglog */ 6712 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6713 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6714 6715 /* to enable dbglog in the firmware */ 6716 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6717 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6718 6719 /* timestamp resolution */ 6720 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6721 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6722 6723 /* number of queued messages before sending them to the host */ 6724 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6725 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6726 6727 /* 6728 * Log levels to enable. This defines the minimum level to enable, this is 6729 * not a bitmask. See enum ath10k_dbglog_level for the values. 6730 */ 6731 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6732 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6733 6734 /* 6735 * Note: this is a cleaned up version of a struct firmware uses. For 6736 * example, config_valid was hidden inside an array. 6737 */ 6738 struct wmi_dbglog_cfg_cmd { 6739 /* bitmask to hold mod id config*/ 6740 __le32 module_enable; 6741 6742 /* see ATH10K_DBGLOG_CFG_ */ 6743 __le32 config_enable; 6744 6745 /* mask of module id bits to be changed */ 6746 __le32 module_valid; 6747 6748 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6749 __le32 config_valid; 6750 } __packed; 6751 6752 struct wmi_10_4_dbglog_cfg_cmd { 6753 /* bitmask to hold mod id config*/ 6754 __le64 module_enable; 6755 6756 /* see ATH10K_DBGLOG_CFG_ */ 6757 __le32 config_enable; 6758 6759 /* mask of module id bits to be changed */ 6760 __le64 module_valid; 6761 6762 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6763 __le32 config_valid; 6764 } __packed; 6765 6766 enum wmi_roam_reason { 6767 WMI_ROAM_REASON_BETTER_AP = 1, 6768 WMI_ROAM_REASON_BEACON_MISS = 2, 6769 WMI_ROAM_REASON_LOW_RSSI = 3, 6770 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6771 WMI_ROAM_REASON_HO_FAILED = 5, 6772 6773 /* keep last */ 6774 WMI_ROAM_REASON_MAX, 6775 }; 6776 6777 struct wmi_roam_ev { 6778 __le32 vdev_id; 6779 __le32 reason; 6780 } __packed; 6781 6782 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6783 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6784 6785 #define WMI_MAX_EVENT 0x1000 6786 /* Maximum number of pending TXed WMI packets */ 6787 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6788 6789 /* By default disable power save for IBSS */ 6790 #define ATH10K_DEFAULT_ATIM 0 6791 6792 #define WMI_MAX_MEM_REQS 16 6793 6794 struct wmi_scan_ev_arg { 6795 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6796 __le32 reason; /* %WMI_SCAN_REASON_ */ 6797 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6798 __le32 scan_req_id; 6799 __le32 scan_id; 6800 __le32 vdev_id; 6801 }; 6802 6803 struct mgmt_tx_compl_params { 6804 u32 desc_id; 6805 u32 status; 6806 u32 ppdu_id; 6807 int ack_rssi; 6808 }; 6809 6810 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6811 __le32 desc_id; 6812 __le32 status; 6813 __le32 pdev_id; 6814 __le32 ppdu_id; 6815 __le32 ack_rssi; 6816 }; 6817 6818 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { 6819 __le32 num_reports; 6820 const __le32 *desc_ids; 6821 const __le32 *status; 6822 const __le32 *ppdu_ids; 6823 const __le32 *ack_rssi; 6824 }; 6825 6826 struct wmi_peer_delete_resp_ev_arg { 6827 __le32 vdev_id; 6828 struct wmi_mac_addr peer_addr; 6829 }; 6830 6831 #define WMI_MGMT_RX_NUM_RSSI 4 6832 struct wmi_mgmt_rx_ev_arg { 6833 __le32 channel; 6834 __le32 snr; 6835 __le32 rate; 6836 __le32 phy_mode; 6837 __le32 buf_len; 6838 __le32 status; /* %WMI_RX_STATUS_ */ 6839 struct wmi_mgmt_rx_ext_info ext_info; 6840 __le32 rssi[WMI_MGMT_RX_NUM_RSSI]; 6841 }; 6842 6843 struct wmi_ch_info_ev_arg { 6844 __le32 err_code; 6845 __le32 freq; 6846 __le32 cmd_flags; 6847 __le32 noise_floor; 6848 __le32 rx_clear_count; 6849 __le32 cycle_count; 6850 __le32 chan_tx_pwr_range; 6851 __le32 chan_tx_pwr_tp; 6852 __le32 rx_frame_count; 6853 __le32 my_bss_rx_cycle_count; 6854 __le32 rx_11b_mode_data_duration; 6855 __le32 tx_frame_cnt; 6856 __le32 mac_clk_mhz; 6857 }; 6858 6859 /* From 10.4 firmware, not sure all have the same values. */ 6860 enum wmi_vdev_start_status { 6861 WMI_VDEV_START_OK = 0, 6862 WMI_VDEV_START_CHAN_INVALID, 6863 }; 6864 6865 struct wmi_vdev_start_ev_arg { 6866 __le32 vdev_id; 6867 __le32 req_id; 6868 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6869 __le32 status; /* See wmi_vdev_start_status enum above */ 6870 }; 6871 6872 struct wmi_peer_kick_ev_arg { 6873 const u8 *mac_addr; 6874 }; 6875 6876 struct wmi_swba_ev_arg { 6877 __le32 vdev_map; 6878 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6879 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6880 }; 6881 6882 struct wmi_phyerr_ev_arg { 6883 u32 tsf_timestamp; 6884 u16 freq1; 6885 u16 freq2; 6886 u8 rssi_combined; 6887 u8 chan_width_mhz; 6888 u8 phy_err_code; 6889 u16 nf_chains[4]; 6890 u32 buf_len; 6891 const u8 *buf; 6892 u8 hdr_len; 6893 }; 6894 6895 struct wmi_phyerr_hdr_arg { 6896 u32 num_phyerrs; 6897 u32 tsf_l32; 6898 u32 tsf_u32; 6899 u32 buf_len; 6900 const void *phyerrs; 6901 }; 6902 6903 struct wmi_dfs_status_ev_arg { 6904 u32 status; 6905 }; 6906 6907 struct wmi_svc_rdy_ev_arg { 6908 __le32 min_tx_power; 6909 __le32 max_tx_power; 6910 __le32 ht_cap; 6911 __le32 vht_cap; 6912 __le32 vht_supp_mcs; 6913 __le32 sw_ver0; 6914 __le32 sw_ver1; 6915 __le32 fw_build; 6916 __le32 phy_capab; 6917 __le32 num_rf_chains; 6918 __le32 eeprom_rd; 6919 __le32 num_mem_reqs; 6920 __le32 low_2ghz_chan; 6921 __le32 high_2ghz_chan; 6922 __le32 low_5ghz_chan; 6923 __le32 high_5ghz_chan; 6924 __le32 sys_cap_info; 6925 const __le32 *service_map; 6926 size_t service_map_len; 6927 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6928 }; 6929 6930 struct wmi_svc_avail_ev_arg { 6931 bool service_map_ext_valid; 6932 __le32 service_map_ext_len; 6933 const __le32 *service_map_ext; 6934 }; 6935 6936 struct wmi_rdy_ev_arg { 6937 __le32 sw_version; 6938 __le32 abi_version; 6939 __le32 status; 6940 const u8 *mac_addr; 6941 }; 6942 6943 struct wmi_roam_ev_arg { 6944 __le32 vdev_id; 6945 __le32 reason; 6946 __le32 rssi; 6947 }; 6948 6949 struct wmi_echo_ev_arg { 6950 __le32 value; 6951 }; 6952 6953 struct wmi_pdev_temperature_event { 6954 /* temperature value in Celsius degree */ 6955 __le32 temperature; 6956 } __packed; 6957 6958 struct wmi_pdev_bss_chan_info_event { 6959 __le32 freq; 6960 __le32 noise_floor; 6961 __le64 cycle_busy; 6962 __le64 cycle_total; 6963 __le64 cycle_tx; 6964 __le64 cycle_rx; 6965 __le64 cycle_rx_bss; 6966 __le32 reserved; 6967 } __packed; 6968 6969 /* WOW structures */ 6970 enum wmi_wow_wakeup_event { 6971 WOW_BMISS_EVENT = 0, 6972 WOW_BETTER_AP_EVENT, 6973 WOW_DEAUTH_RECVD_EVENT, 6974 WOW_MAGIC_PKT_RECVD_EVENT, 6975 WOW_GTK_ERR_EVENT, 6976 WOW_FOURWAY_HSHAKE_EVENT, 6977 WOW_EAPOL_RECVD_EVENT, 6978 WOW_NLO_DETECTED_EVENT, 6979 WOW_DISASSOC_RECVD_EVENT, 6980 WOW_PATTERN_MATCH_EVENT, 6981 WOW_CSA_IE_EVENT, 6982 WOW_PROBE_REQ_WPS_IE_EVENT, 6983 WOW_AUTH_REQ_EVENT, 6984 WOW_ASSOC_REQ_EVENT, 6985 WOW_HTT_EVENT, 6986 WOW_RA_MATCH_EVENT, 6987 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6988 WOW_IOAC_MAGIC_EVENT, 6989 WOW_IOAC_SHORT_EVENT, 6990 WOW_IOAC_EXTEND_EVENT, 6991 WOW_IOAC_TIMER_EVENT, 6992 WOW_DFS_PHYERR_RADAR_EVENT, 6993 WOW_BEACON_EVENT, 6994 WOW_CLIENT_KICKOUT_EVENT, 6995 WOW_EVENT_MAX, 6996 }; 6997 6998 #define C2S(x) case x: return #x 6999 wow_wakeup_event(enum wmi_wow_wakeup_event ev)7000 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 7001 { 7002 switch (ev) { 7003 C2S(WOW_BMISS_EVENT); 7004 C2S(WOW_BETTER_AP_EVENT); 7005 C2S(WOW_DEAUTH_RECVD_EVENT); 7006 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 7007 C2S(WOW_GTK_ERR_EVENT); 7008 C2S(WOW_FOURWAY_HSHAKE_EVENT); 7009 C2S(WOW_EAPOL_RECVD_EVENT); 7010 C2S(WOW_NLO_DETECTED_EVENT); 7011 C2S(WOW_DISASSOC_RECVD_EVENT); 7012 C2S(WOW_PATTERN_MATCH_EVENT); 7013 C2S(WOW_CSA_IE_EVENT); 7014 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 7015 C2S(WOW_AUTH_REQ_EVENT); 7016 C2S(WOW_ASSOC_REQ_EVENT); 7017 C2S(WOW_HTT_EVENT); 7018 C2S(WOW_RA_MATCH_EVENT); 7019 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 7020 C2S(WOW_IOAC_MAGIC_EVENT); 7021 C2S(WOW_IOAC_SHORT_EVENT); 7022 C2S(WOW_IOAC_EXTEND_EVENT); 7023 C2S(WOW_IOAC_TIMER_EVENT); 7024 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 7025 C2S(WOW_BEACON_EVENT); 7026 C2S(WOW_CLIENT_KICKOUT_EVENT); 7027 C2S(WOW_EVENT_MAX); 7028 default: 7029 return NULL; 7030 } 7031 } 7032 7033 enum wmi_wow_wake_reason { 7034 WOW_REASON_UNSPECIFIED = -1, 7035 WOW_REASON_NLOD = 0, 7036 WOW_REASON_AP_ASSOC_LOST, 7037 WOW_REASON_LOW_RSSI, 7038 WOW_REASON_DEAUTH_RECVD, 7039 WOW_REASON_DISASSOC_RECVD, 7040 WOW_REASON_GTK_HS_ERR, 7041 WOW_REASON_EAP_REQ, 7042 WOW_REASON_FOURWAY_HS_RECV, 7043 WOW_REASON_TIMER_INTR_RECV, 7044 WOW_REASON_PATTERN_MATCH_FOUND, 7045 WOW_REASON_RECV_MAGIC_PATTERN, 7046 WOW_REASON_P2P_DISC, 7047 WOW_REASON_WLAN_HB, 7048 WOW_REASON_CSA_EVENT, 7049 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 7050 WOW_REASON_AUTH_REQ_RECV, 7051 WOW_REASON_ASSOC_REQ_RECV, 7052 WOW_REASON_HTT_EVENT, 7053 WOW_REASON_RA_MATCH, 7054 WOW_REASON_HOST_AUTO_SHUTDOWN, 7055 WOW_REASON_IOAC_MAGIC_EVENT, 7056 WOW_REASON_IOAC_SHORT_EVENT, 7057 WOW_REASON_IOAC_EXTEND_EVENT, 7058 WOW_REASON_IOAC_TIMER_EVENT, 7059 WOW_REASON_ROAM_HO, 7060 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 7061 WOW_REASON_BEACON_RECV, 7062 WOW_REASON_CLIENT_KICKOUT_EVENT, 7063 WOW_REASON_DEBUG_TEST = 0xFF, 7064 }; 7065 wow_reason(enum wmi_wow_wake_reason reason)7066 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 7067 { 7068 switch (reason) { 7069 C2S(WOW_REASON_UNSPECIFIED); 7070 C2S(WOW_REASON_NLOD); 7071 C2S(WOW_REASON_AP_ASSOC_LOST); 7072 C2S(WOW_REASON_LOW_RSSI); 7073 C2S(WOW_REASON_DEAUTH_RECVD); 7074 C2S(WOW_REASON_DISASSOC_RECVD); 7075 C2S(WOW_REASON_GTK_HS_ERR); 7076 C2S(WOW_REASON_EAP_REQ); 7077 C2S(WOW_REASON_FOURWAY_HS_RECV); 7078 C2S(WOW_REASON_TIMER_INTR_RECV); 7079 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 7080 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 7081 C2S(WOW_REASON_P2P_DISC); 7082 C2S(WOW_REASON_WLAN_HB); 7083 C2S(WOW_REASON_CSA_EVENT); 7084 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 7085 C2S(WOW_REASON_AUTH_REQ_RECV); 7086 C2S(WOW_REASON_ASSOC_REQ_RECV); 7087 C2S(WOW_REASON_HTT_EVENT); 7088 C2S(WOW_REASON_RA_MATCH); 7089 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 7090 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 7091 C2S(WOW_REASON_IOAC_SHORT_EVENT); 7092 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 7093 C2S(WOW_REASON_IOAC_TIMER_EVENT); 7094 C2S(WOW_REASON_ROAM_HO); 7095 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 7096 C2S(WOW_REASON_BEACON_RECV); 7097 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 7098 C2S(WOW_REASON_DEBUG_TEST); 7099 default: 7100 return NULL; 7101 } 7102 } 7103 7104 #undef C2S 7105 7106 struct wmi_wow_ev_arg { 7107 u32 vdev_id; 7108 u32 flag; 7109 enum wmi_wow_wake_reason wake_reason; 7110 u32 data_len; 7111 }; 7112 7113 #define WOW_MIN_PATTERN_SIZE 1 7114 #define WOW_MAX_PATTERN_SIZE 148 7115 #define WOW_MAX_PKT_OFFSET 128 7116 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 7117 sizeof(struct rfc1042_hdr)) 7118 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 7119 offsetof(struct ieee80211_hdr_3addr, addr1)) 7120 7121 enum wmi_tdls_state { 7122 WMI_TDLS_DISABLE, 7123 WMI_TDLS_ENABLE_PASSIVE, 7124 WMI_TDLS_ENABLE_ACTIVE, 7125 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 7126 }; 7127 7128 enum wmi_tdls_peer_state { 7129 WMI_TDLS_PEER_STATE_PEERING, 7130 WMI_TDLS_PEER_STATE_CONNECTED, 7131 WMI_TDLS_PEER_STATE_TEARDOWN, 7132 }; 7133 7134 struct wmi_tdls_peer_update_cmd_arg { 7135 u32 vdev_id; 7136 enum wmi_tdls_peer_state peer_state; 7137 u8 addr[ETH_ALEN]; 7138 }; 7139 7140 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 7141 7142 #define WMI_TDLS_PEER_SP_MASK 0x60 7143 #define WMI_TDLS_PEER_SP_LSB 5 7144 7145 enum wmi_tdls_options { 7146 WMI_TDLS_OFFCHAN_EN = BIT(0), 7147 WMI_TDLS_BUFFER_STA_EN = BIT(1), 7148 WMI_TDLS_SLEEP_STA_EN = BIT(2), 7149 }; 7150 7151 enum { 7152 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 7153 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 7154 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 7155 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 7156 }; 7157 7158 struct wmi_tdls_peer_capab_arg { 7159 u8 peer_uapsd_queues; 7160 u8 peer_max_sp; 7161 u32 buff_sta_support; 7162 u32 off_chan_support; 7163 u32 peer_curr_operclass; 7164 u32 self_curr_operclass; 7165 u32 peer_chan_len; 7166 u32 peer_operclass_len; 7167 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7168 u32 is_peer_responder; 7169 u32 pref_offchan_num; 7170 u32 pref_offchan_bw; 7171 }; 7172 7173 struct wmi_10_4_tdls_set_state_cmd { 7174 __le32 vdev_id; 7175 __le32 state; 7176 __le32 notification_interval_ms; 7177 __le32 tx_discovery_threshold; 7178 __le32 tx_teardown_threshold; 7179 __le32 rssi_teardown_threshold; 7180 __le32 rssi_delta; 7181 __le32 tdls_options; 7182 __le32 tdls_peer_traffic_ind_window; 7183 __le32 tdls_peer_traffic_response_timeout_ms; 7184 __le32 tdls_puapsd_mask; 7185 __le32 tdls_puapsd_inactivity_time_ms; 7186 __le32 tdls_puapsd_rx_frame_threshold; 7187 __le32 teardown_notification_ms; 7188 __le32 tdls_peer_kickout_threshold; 7189 } __packed; 7190 7191 struct wmi_tdls_peer_capabilities { 7192 __le32 peer_qos; 7193 __le32 buff_sta_support; 7194 __le32 off_chan_support; 7195 __le32 peer_curr_operclass; 7196 __le32 self_curr_operclass; 7197 __le32 peer_chan_len; 7198 __le32 peer_operclass_len; 7199 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7200 __le32 is_peer_responder; 7201 __le32 pref_offchan_num; 7202 __le32 pref_offchan_bw; 7203 union { 7204 /* to match legacy implementation allocate room for 7205 * at least one record even if peer_chan_len is 0 7206 */ 7207 struct wmi_channel peer_chan_min_allocation; 7208 DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list); 7209 }; 7210 } __packed; 7211 7212 struct wmi_10_4_tdls_peer_update_cmd { 7213 __le32 vdev_id; 7214 struct wmi_mac_addr peer_macaddr; 7215 __le32 peer_state; 7216 __le32 reserved[4]; 7217 struct wmi_tdls_peer_capabilities peer_capab; 7218 } __packed; 7219 7220 enum wmi_tdls_peer_reason { 7221 WMI_TDLS_TEARDOWN_REASON_TX, 7222 WMI_TDLS_TEARDOWN_REASON_RSSI, 7223 WMI_TDLS_TEARDOWN_REASON_SCAN, 7224 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7225 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7226 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7227 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7228 WMI_TDLS_ENTER_BUF_STA, 7229 WMI_TDLS_EXIT_BUF_STA, 7230 WMI_TDLS_ENTER_BT_BUSY_MODE, 7231 WMI_TDLS_EXIT_BT_BUSY_MODE, 7232 WMI_TDLS_SCAN_STARTED_EVENT, 7233 WMI_TDLS_SCAN_COMPLETED_EVENT, 7234 }; 7235 7236 enum wmi_tdls_peer_notification { 7237 WMI_TDLS_SHOULD_DISCOVER, 7238 WMI_TDLS_SHOULD_TEARDOWN, 7239 WMI_TDLS_PEER_DISCONNECTED, 7240 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7241 }; 7242 7243 struct wmi_tdls_peer_event { 7244 struct wmi_mac_addr peer_macaddr; 7245 /* see enum wmi_tdls_peer_notification*/ 7246 __le32 peer_status; 7247 /* see enum wmi_tdls_peer_reason */ 7248 __le32 peer_reason; 7249 __le32 vdev_id; 7250 } __packed; 7251 7252 enum wmi_tid_aggr_control_conf { 7253 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE, 7254 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE, 7255 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE, 7256 }; 7257 7258 enum wmi_noack_tid_conf { 7259 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY, 7260 WMI_PEER_TID_CONFIG_ACK, 7261 WMI_PEER_TID_CONFIG_NOACK, 7262 }; 7263 7264 enum wmi_tid_rate_ctrl_conf { 7265 WMI_TID_CONFIG_RATE_CONTROL_IGNORE, 7266 WMI_TID_CONFIG_RATE_CONTROL_AUTO, 7267 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE, 7268 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE, 7269 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP, 7270 }; 7271 7272 enum wmi_tid_rtscts_control_conf { 7273 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE, 7274 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE, 7275 }; 7276 7277 enum wmi_ext_tid_config_map { 7278 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0), 7279 }; 7280 7281 struct wmi_per_peer_per_tid_cfg_arg { 7282 u32 vdev_id; 7283 struct wmi_mac_addr peer_macaddr; 7284 u32 tid; 7285 enum wmi_noack_tid_conf ack_policy; 7286 enum wmi_tid_aggr_control_conf aggr_control; 7287 u8 rate_ctrl; 7288 u32 retry_count; 7289 u32 rcode_flags; 7290 u32 ext_tid_cfg_bitmap; 7291 u32 rtscts_ctrl; 7292 }; 7293 7294 struct wmi_peer_per_tid_cfg_cmd { 7295 __le32 vdev_id; 7296 struct wmi_mac_addr peer_macaddr; 7297 __le32 tid; 7298 7299 /* see enum wmi_noack_tid_conf */ 7300 __le32 ack_policy; 7301 7302 /* see enum wmi_tid_aggr_control_conf */ 7303 __le32 aggr_control; 7304 7305 /* see enum wmi_tid_rate_ctrl_conf */ 7306 __le32 rate_control; 7307 __le32 rcode_flags; 7308 __le32 retry_count; 7309 7310 /* See enum wmi_ext_tid_config_map */ 7311 __le32 ext_tid_cfg_bitmap; 7312 7313 /* see enum wmi_tid_rtscts_control_conf */ 7314 __le32 rtscts_ctrl; 7315 } __packed; 7316 7317 enum wmi_txbf_conf { 7318 WMI_TXBF_CONF_UNSUPPORTED, 7319 WMI_TXBF_CONF_BEFORE_ASSOC, 7320 WMI_TXBF_CONF_AFTER_ASSOC, 7321 }; 7322 7323 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7324 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7325 7326 struct wmi_pdev_set_adaptive_cca_params { 7327 __le32 enable; 7328 __le32 cca_detect_level; 7329 __le32 cca_detect_margin; 7330 } __packed; 7331 7332 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7333 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7334 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7335 #define WMI_PNO_MAX_NETW_CHANNELS 26 7336 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7337 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7338 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7339 7340 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7341 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7342 7343 #define WMI_PNO_24G_DEFAULT_CH 1 7344 #define WMI_PNO_5G_DEFAULT_CH 36 7345 7346 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7347 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7348 7349 /* SSID broadcast type */ 7350 enum wmi_SSID_bcast_type { 7351 BCAST_UNKNOWN = 0, 7352 BCAST_NORMAL = 1, 7353 BCAST_HIDDEN = 2, 7354 }; 7355 7356 struct wmi_network_type { 7357 struct wmi_ssid ssid; 7358 u32 authentication; 7359 u32 encryption; 7360 u32 bcast_nw_type; 7361 u8 channel_count; 7362 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7363 s32 rssi_threshold; 7364 } __packed; 7365 7366 struct wmi_pno_scan_req { 7367 u8 enable; 7368 u8 vdev_id; 7369 u8 uc_networks_count; 7370 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7371 u32 fast_scan_period; 7372 u32 slow_scan_period; 7373 u8 fast_scan_max_cycles; 7374 7375 bool do_passive_scan; 7376 7377 u32 delay_start_time; 7378 u32 active_min_time; 7379 u32 active_max_time; 7380 u32 passive_min_time; 7381 u32 passive_max_time; 7382 7383 /* mac address randomization attributes */ 7384 u32 enable_pno_scan_randomization; 7385 u8 mac_addr[ETH_ALEN]; 7386 u8 mac_addr_mask[ETH_ALEN]; 7387 } __packed; 7388 7389 enum wmi_host_platform_type { 7390 WMI_HOST_PLATFORM_HIGH_PERF, 7391 WMI_HOST_PLATFORM_LOW_PERF, 7392 }; 7393 7394 enum wmi_bss_survey_req_type { 7395 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7396 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7397 }; 7398 7399 struct wmi_pdev_chan_info_req_cmd { 7400 __le32 type; 7401 __le32 reserved; 7402 } __packed; 7403 7404 /* bb timing register configurations */ 7405 struct wmi_bb_timing_cfg_arg { 7406 /* Tx_end to pa off timing */ 7407 u32 bb_tx_timing; 7408 7409 /* Tx_end to external pa off timing */ 7410 u32 bb_xpa_timing; 7411 }; 7412 7413 struct wmi_pdev_bb_timing_cfg_cmd { 7414 /* Tx_end to pa off timing */ 7415 __le32 bb_tx_timing; 7416 7417 /* Tx_end to external pa off timing */ 7418 __le32 bb_xpa_timing; 7419 } __packed; 7420 7421 struct ath10k; 7422 struct ath10k_vif; 7423 struct ath10k_fw_stats_pdev; 7424 struct ath10k_fw_stats_peer; 7425 struct ath10k_fw_stats; 7426 7427 int ath10k_wmi_attach(struct ath10k *ar); 7428 void ath10k_wmi_detach(struct ath10k *ar); 7429 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7430 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7431 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7432 7433 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7434 int ath10k_wmi_connect(struct ath10k *ar); 7435 7436 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7437 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7438 u32 cmd_id); 7439 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7440 7441 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7442 struct ath10k_fw_stats_pdev *dst); 7443 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7444 struct ath10k_fw_stats_pdev *dst); 7445 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7446 struct ath10k_fw_stats_pdev *dst); 7447 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7448 struct ath10k_fw_stats_pdev *dst); 7449 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7450 struct ath10k_fw_stats_peer *dst); 7451 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7452 struct wmi_host_mem_chunks *chunks); 7453 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7454 const struct wmi_start_scan_arg *arg); 7455 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7456 const struct wmi_wmm_params_arg *arg); 7457 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch, 7458 const struct wmi_channel_arg *arg); 7459 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7460 7461 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7462 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7463 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7464 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); 7465 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7466 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7467 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7468 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7469 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7470 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7471 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7472 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7473 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7474 void ath10k_wmi_event_dfs(struct ath10k *ar, 7475 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7476 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7477 struct wmi_phyerr_ev_arg *phyerr, 7478 u64 tsf); 7479 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7480 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7481 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7482 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7483 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7484 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7485 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7486 struct sk_buff *skb); 7487 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7488 struct sk_buff *skb); 7489 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7490 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7491 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7492 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7493 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7494 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7495 struct sk_buff *skb); 7496 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7497 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7498 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7499 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7500 struct sk_buff *skb); 7501 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7502 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7503 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7504 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7505 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7506 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7507 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7508 int left_len, struct wmi_phyerr_ev_arg *arg); 7509 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7510 struct ath10k_fw_stats *fw_stats, 7511 char *buf); 7512 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7513 struct ath10k_fw_stats *fw_stats, 7514 char *buf); 7515 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7516 struct ath10k_fw_stats *fw_stats, 7517 char *buf); 7518 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7519 enum wmi_vdev_subtype subtype); 7520 int ath10k_wmi_barrier(struct ath10k *ar); 7521 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7522 u32 num_tx_chain); 7523 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7524 7525 #endif /* _WMI_H_ */ 7526