1  // SPDX-License-Identifier: GPL-2.0-only
2  /*
3   * TI clock support
4   *
5   * Copyright (C) 2013 Texas Instruments, Inc.
6   *
7   * Tero Kristo <t-kristo@ti.com>
8   */
9  
10  #include <linux/cleanup.h>
11  #include <linux/clk.h>
12  #include <linux/clk-provider.h>
13  #include <linux/clkdev.h>
14  #include <linux/clk/ti.h>
15  #include <linux/io.h>
16  #include <linux/of.h>
17  #include <linux/of_address.h>
18  #include <linux/list.h>
19  #include <linux/minmax.h>
20  #include <linux/regmap.h>
21  #include <linux/string_helpers.h>
22  #include <linux/memblock.h>
23  #include <linux/device.h>
24  
25  #include "clock.h"
26  
27  #undef pr_fmt
28  #define pr_fmt(fmt) "%s: " fmt, __func__
29  
30  static LIST_HEAD(clk_hw_omap_clocks);
31  struct ti_clk_ll_ops *ti_clk_ll_ops;
32  static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
33  
34  struct ti_clk_features ti_clk_features;
35  
36  struct clk_iomap {
37  	struct regmap *regmap;
38  	void __iomem *mem;
39  };
40  
41  static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
42  
clk_memmap_writel(u32 val,const struct clk_omap_reg * reg)43  static void clk_memmap_writel(u32 val, const struct clk_omap_reg *reg)
44  {
45  	struct clk_iomap *io = clk_memmaps[reg->index];
46  
47  	if (reg->ptr)
48  		writel_relaxed(val, reg->ptr);
49  	else if (io->regmap)
50  		regmap_write(io->regmap, reg->offset, val);
51  	else
52  		writel_relaxed(val, io->mem + reg->offset);
53  }
54  
_clk_rmw(u32 val,u32 mask,void __iomem * ptr)55  static void _clk_rmw(u32 val, u32 mask, void __iomem *ptr)
56  {
57  	u32 v;
58  
59  	v = readl_relaxed(ptr);
60  	v &= ~mask;
61  	v |= val;
62  	writel_relaxed(v, ptr);
63  }
64  
clk_memmap_rmw(u32 val,u32 mask,const struct clk_omap_reg * reg)65  static void clk_memmap_rmw(u32 val, u32 mask, const struct clk_omap_reg *reg)
66  {
67  	struct clk_iomap *io = clk_memmaps[reg->index];
68  
69  	if (reg->ptr) {
70  		_clk_rmw(val, mask, reg->ptr);
71  	} else if (io->regmap) {
72  		regmap_update_bits(io->regmap, reg->offset, mask, val);
73  	} else {
74  		_clk_rmw(val, mask, io->mem + reg->offset);
75  	}
76  }
77  
clk_memmap_readl(const struct clk_omap_reg * reg)78  static u32 clk_memmap_readl(const struct clk_omap_reg *reg)
79  {
80  	u32 val;
81  	struct clk_iomap *io = clk_memmaps[reg->index];
82  
83  	if (reg->ptr)
84  		val = readl_relaxed(reg->ptr);
85  	else if (io->regmap)
86  		regmap_read(io->regmap, reg->offset, &val);
87  	else
88  		val = readl_relaxed(io->mem + reg->offset);
89  
90  	return val;
91  }
92  
93  /**
94   * ti_clk_setup_ll_ops - setup low level clock operations
95   * @ops: low level clock ops descriptor
96   *
97   * Sets up low level clock operations for TI clock driver. This is used
98   * to provide various callbacks for the clock driver towards platform
99   * specific code. Returns 0 on success, -EBUSY if ll_ops have been
100   * registered already.
101   */
ti_clk_setup_ll_ops(struct ti_clk_ll_ops * ops)102  int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
103  {
104  	if (ti_clk_ll_ops) {
105  		pr_err("Attempt to register ll_ops multiple times.\n");
106  		return -EBUSY;
107  	}
108  
109  	ti_clk_ll_ops = ops;
110  	ops->clk_readl = clk_memmap_readl;
111  	ops->clk_writel = clk_memmap_writel;
112  	ops->clk_rmw = clk_memmap_rmw;
113  
114  	return 0;
115  }
116  
117  /*
118   * Eventually we could standardize to using '_' for clk-*.c files to follow the
119   * TRM naming.
120   */
ti_find_clock_provider(struct device_node * from,const char * name)121  static struct device_node *ti_find_clock_provider(struct device_node *from,
122  						  const char *name)
123  {
124  	char *tmp __free(kfree) = NULL;
125  	struct device_node *np;
126  	bool found = false;
127  	const char *n;
128  	char *p;
129  
130  	tmp = kstrdup_and_replace(name, '-', '_', GFP_KERNEL);
131  	if (!tmp)
132  		return NULL;
133  
134  	/* Ignore a possible address for the node name */
135  	p = strchr(tmp, '@');
136  	if (p)
137  		*p = '\0';
138  
139  	/* Node named "clock" with "clock-output-names" */
140  	for_each_of_allnodes_from(from, np) {
141  		if (of_property_read_string_index(np, "clock-output-names",
142  						  0, &n))
143  			continue;
144  
145  		if (!strncmp(n, tmp, strlen(tmp))) {
146  			of_node_get(np);
147  			found = true;
148  			break;
149  		}
150  	}
151  
152  	if (found) {
153  		of_node_put(from);
154  		return np;
155  	}
156  
157  	/* Fall back to using old node name base provider name */
158  	return of_find_node_by_name(from, tmp);
159  }
160  
161  /**
162   * ti_dt_clocks_register - register DT alias clocks during boot
163   * @oclks: list of clocks to register
164   *
165   * Register alias or non-standard DT clock entries during boot. By
166   * default, DT clocks are found based on their clock-output-names
167   * property, or the clock node name for legacy cases. If any
168   * additional con-id / dev-id -> clock mapping is required, use this
169   * function to list these.
170   */
ti_dt_clocks_register(struct ti_dt_clk oclks[])171  void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
172  {
173  	struct ti_dt_clk *c;
174  	struct device_node *node, *parent, *child;
175  	struct clk *clk;
176  	struct of_phandle_args clkspec;
177  	char buf[64];
178  	char *ptr;
179  	char *tags[2];
180  	int i;
181  	int num_args;
182  	int ret;
183  	static bool clkctrl_nodes_missing;
184  	static bool has_clkctrl_data;
185  	static bool compat_mode;
186  
187  	compat_mode = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT;
188  
189  	for (c = oclks; c->node_name != NULL; c++) {
190  		strcpy(buf, c->node_name);
191  		ptr = buf;
192  		for (i = 0; i < 2; i++)
193  			tags[i] = NULL;
194  		num_args = 0;
195  		while (*ptr) {
196  			if (*ptr == ':') {
197  				if (num_args >= 2) {
198  					pr_warn("Bad number of tags on %s\n",
199  						c->node_name);
200  					return;
201  				}
202  				tags[num_args++] = ptr + 1;
203  				*ptr = 0;
204  			}
205  			ptr++;
206  		}
207  
208  		if (num_args && clkctrl_nodes_missing)
209  			continue;
210  
211  		node = ti_find_clock_provider(NULL, buf);
212  		if (num_args && compat_mode) {
213  			parent = node;
214  			child = of_get_child_by_name(parent, "clock");
215  			if (!child)
216  				child = of_get_child_by_name(parent, "clk");
217  			if (child) {
218  				of_node_put(parent);
219  				node = child;
220  			}
221  		}
222  
223  		clkspec.np = node;
224  		clkspec.args_count = num_args;
225  		for (i = 0; i < num_args; i++) {
226  			ret = kstrtoint(tags[i], i ? 10 : 16, clkspec.args + i);
227  			if (ret) {
228  				pr_warn("Bad tag in %s at %d: %s\n",
229  					c->node_name, i, tags[i]);
230  				of_node_put(node);
231  				return;
232  			}
233  		}
234  		clk = of_clk_get_from_provider(&clkspec);
235  		of_node_put(node);
236  		if (!IS_ERR(clk)) {
237  			c->lk.clk = clk;
238  			clkdev_add(&c->lk);
239  		} else {
240  			if (num_args && !has_clkctrl_data) {
241  				struct device_node *np;
242  
243  				np = of_find_compatible_node(NULL, NULL,
244  							     "ti,clkctrl");
245  				if (np) {
246  					has_clkctrl_data = true;
247  					of_node_put(np);
248  				} else {
249  					clkctrl_nodes_missing = true;
250  
251  					pr_warn("missing clkctrl nodes, please update your dts.\n");
252  					continue;
253  				}
254  			}
255  
256  			pr_warn("failed to lookup clock node %s, ret=%ld\n",
257  				c->node_name, PTR_ERR(clk));
258  		}
259  	}
260  }
261  
262  struct clk_init_item {
263  	struct device_node *node;
264  	void *user;
265  	ti_of_clk_init_cb_t func;
266  	struct list_head link;
267  };
268  
269  static LIST_HEAD(retry_list);
270  
271  /**
272   * ti_clk_retry_init - retries a failed clock init at later phase
273   * @node: device node for the clock
274   * @user: user data pointer
275   * @func: init function to be called for the clock
276   *
277   * Adds a failed clock init to the retry list. The retry list is parsed
278   * once all the other clocks have been initialized.
279   */
ti_clk_retry_init(struct device_node * node,void * user,ti_of_clk_init_cb_t func)280  int __init ti_clk_retry_init(struct device_node *node, void *user,
281  			     ti_of_clk_init_cb_t func)
282  {
283  	struct clk_init_item *retry;
284  
285  	pr_debug("%pOFn: adding to retry list...\n", node);
286  	retry = kzalloc(sizeof(*retry), GFP_KERNEL);
287  	if (!retry)
288  		return -ENOMEM;
289  
290  	retry->node = node;
291  	retry->func = func;
292  	retry->user = user;
293  	list_add(&retry->link, &retry_list);
294  
295  	return 0;
296  }
297  
298  /**
299   * ti_clk_get_reg_addr - get register address for a clock register
300   * @node: device node for the clock
301   * @index: register index from the clock node
302   * @reg: pointer to target register struct
303   *
304   * Builds clock register address from device tree information, and returns
305   * the data via the provided output pointer @reg. Returns 0 on success,
306   * negative error value on failure.
307   */
ti_clk_get_reg_addr(struct device_node * node,int index,struct clk_omap_reg * reg)308  int ti_clk_get_reg_addr(struct device_node *node, int index,
309  			struct clk_omap_reg *reg)
310  {
311  	u32 clksel_addr, val;
312  	bool is_clksel = false;
313  	int i, err;
314  
315  	for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
316  		if (clocks_node_ptr[i] == node->parent)
317  			break;
318  		if (clocks_node_ptr[i] == node->parent->parent)
319  			break;
320  	}
321  
322  	if (i == CLK_MAX_MEMMAPS) {
323  		pr_err("clk-provider not found for %pOFn!\n", node);
324  		return -ENOENT;
325  	}
326  
327  	reg->index = i;
328  
329  	if (of_device_is_compatible(node->parent, "ti,clksel")) {
330  		err = of_property_read_u32_index(node->parent, "reg", index, &clksel_addr);
331  		if (err) {
332  			pr_err("%pOFn parent clksel must have reg[%d]!\n", node, index);
333  			return -EINVAL;
334  		}
335  		is_clksel = true;
336  	}
337  
338  	err = of_property_read_u32_index(node, "reg", index, &val);
339  	if (err && is_clksel) {
340  		/* Legacy clksel with no reg and a possible ti,bit-shift property */
341  		reg->offset = clksel_addr;
342  		reg->bit = ti_clk_get_legacy_bit_shift(node);
343  		reg->ptr = NULL;
344  
345  		return 0;
346  	}
347  
348  	/* Updated clksel clock with a proper reg property */
349  	if (is_clksel) {
350  		reg->offset = clksel_addr;
351  		reg->bit = val;
352  		reg->ptr = NULL;
353  		return 0;
354  	}
355  
356  	/* Other clocks that may or may not have ti,bit-shift property  */
357  	reg->offset = val;
358  	reg->bit = ti_clk_get_legacy_bit_shift(node);
359  	reg->ptr = NULL;
360  
361  	return 0;
362  }
363  
364  /**
365   * ti_clk_get_legacy_bit_shift - get bit shift for a clock register
366   * @node: device node for the clock
367   *
368   * Gets the clock register bit shift using the legacy ti,bit-shift
369   * property. Only needed for legacy clock, and can be eventually
370   * dropped once all the composite clocks use a clksel node with a
371   * proper reg property.
372   */
ti_clk_get_legacy_bit_shift(struct device_node * node)373  int ti_clk_get_legacy_bit_shift(struct device_node *node)
374  {
375  	int err;
376  	u32 val;
377  
378  	err = of_property_read_u32(node, "ti,bit-shift", &val);
379  	if (!err && in_range(val, 0, 32))
380  		return val;
381  
382  	return 0;
383  }
384  
ti_clk_latch(struct clk_omap_reg * reg,s8 shift)385  void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
386  {
387  	u32 latch;
388  
389  	if (shift < 0)
390  		return;
391  
392  	latch = 1 << shift;
393  
394  	ti_clk_ll_ops->clk_rmw(latch, latch, reg);
395  	ti_clk_ll_ops->clk_rmw(0, latch, reg);
396  	ti_clk_ll_ops->clk_readl(reg); /* OCP barrier */
397  }
398  
399  /**
400   * omap2_clk_provider_init - init master clock provider
401   * @parent: master node
402   * @index: internal index for clk_reg_ops
403   * @syscon: syscon regmap pointer for accessing clock registers
404   * @mem: iomem pointer for the clock provider memory area, only used if
405   *       syscon is not provided
406   *
407   * Initializes a master clock IP block. This basically sets up the
408   * mapping from clocks node to the memory map index. All the clocks
409   * are then initialized through the common of_clk_init call, and the
410   * clocks will access their memory maps based on the node layout.
411   * Returns 0 in success.
412   */
omap2_clk_provider_init(struct device_node * parent,int index,struct regmap * syscon,void __iomem * mem)413  int __init omap2_clk_provider_init(struct device_node *parent, int index,
414  				   struct regmap *syscon, void __iomem *mem)
415  {
416  	struct device_node *clocks;
417  	struct clk_iomap *io;
418  
419  	/* get clocks for this parent */
420  	clocks = of_get_child_by_name(parent, "clocks");
421  	if (!clocks) {
422  		pr_err("%pOFn missing 'clocks' child node.\n", parent);
423  		return -EINVAL;
424  	}
425  
426  	/* add clocks node info */
427  	clocks_node_ptr[index] = clocks;
428  
429  	io = kzalloc(sizeof(*io), GFP_KERNEL);
430  	if (!io)
431  		return -ENOMEM;
432  
433  	io->regmap = syscon;
434  	io->mem = mem;
435  
436  	clk_memmaps[index] = io;
437  
438  	return 0;
439  }
440  
441  /**
442   * omap2_clk_legacy_provider_init - initialize a legacy clock provider
443   * @index: index for the clock provider
444   * @mem: iomem pointer for the clock provider memory area
445   *
446   * Initializes a legacy clock provider memory mapping.
447   */
omap2_clk_legacy_provider_init(int index,void __iomem * mem)448  void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
449  {
450  	struct clk_iomap *io;
451  
452  	io = memblock_alloc(sizeof(*io), SMP_CACHE_BYTES);
453  	if (!io)
454  		panic("%s: Failed to allocate %zu bytes\n", __func__,
455  		      sizeof(*io));
456  
457  	io->mem = mem;
458  
459  	clk_memmaps[index] = io;
460  }
461  
462  /**
463   * ti_dt_clk_init_retry_clks - init clocks from the retry list
464   *
465   * Initializes any clocks that have failed to initialize before,
466   * reasons being missing parent node(s) during earlier init. This
467   * typically happens only for DPLLs which need to have both of their
468   * parent clocks ready during init.
469   */
ti_dt_clk_init_retry_clks(void)470  void ti_dt_clk_init_retry_clks(void)
471  {
472  	struct clk_init_item *retry;
473  	struct clk_init_item *tmp;
474  	int retries = 5;
475  
476  	while (!list_empty(&retry_list) && retries) {
477  		list_for_each_entry_safe(retry, tmp, &retry_list, link) {
478  			pr_debug("retry-init: %pOFn\n", retry->node);
479  			retry->func(retry->user, retry->node);
480  			list_del(&retry->link);
481  			kfree(retry);
482  		}
483  		retries--;
484  	}
485  }
486  
487  static const struct of_device_id simple_clk_match_table[] __initconst = {
488  	{ .compatible = "fixed-clock" },
489  	{ .compatible = "fixed-factor-clock" },
490  	{ }
491  };
492  
493  /**
494   * ti_dt_clk_name - init clock name from first output name or node name
495   * @np: device node
496   *
497   * Use the first clock-output-name for the clock name if found. Fall back
498   * to legacy naming based on node name.
499   */
ti_dt_clk_name(struct device_node * np)500  const char *ti_dt_clk_name(struct device_node *np)
501  {
502  	const char *name;
503  
504  	if (!of_property_read_string_index(np, "clock-output-names", 0,
505  					   &name))
506  		return name;
507  
508  	return np->name;
509  }
510  
511  /**
512   * ti_clk_add_aliases - setup clock aliases
513   *
514   * Sets up any missing clock aliases. No return value.
515   */
ti_clk_add_aliases(void)516  void __init ti_clk_add_aliases(void)
517  {
518  	struct device_node *np;
519  	struct clk *clk;
520  
521  	for_each_matching_node(np, simple_clk_match_table) {
522  		struct of_phandle_args clkspec;
523  
524  		clkspec.np = np;
525  		clk = of_clk_get_from_provider(&clkspec);
526  
527  		ti_clk_add_alias(clk, ti_dt_clk_name(np));
528  	}
529  }
530  
531  /**
532   * ti_clk_setup_features - setup clock features flags
533   * @features: features definition to use
534   *
535   * Initializes the clock driver features flags based on platform
536   * provided data. No return value.
537   */
ti_clk_setup_features(struct ti_clk_features * features)538  void __init ti_clk_setup_features(struct ti_clk_features *features)
539  {
540  	memcpy(&ti_clk_features, features, sizeof(*features));
541  }
542  
543  /**
544   * ti_clk_get_features - get clock driver features flags
545   *
546   * Get TI clock driver features description. Returns a pointer
547   * to the current feature setup.
548   */
ti_clk_get_features(void)549  const struct ti_clk_features *ti_clk_get_features(void)
550  {
551  	return &ti_clk_features;
552  }
553  
554  /**
555   * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
556   * @clk_names: ptr to an array of strings of clock names to enable
557   * @num_clocks: number of clock names in @clk_names
558   *
559   * Prepare and enable a list of clocks, named by @clk_names.  No
560   * return value. XXX Deprecated; only needed until these clocks are
561   * properly claimed and enabled by the drivers or core code that uses
562   * them.  XXX What code disables & calls clk_put on these clocks?
563   */
omap2_clk_enable_init_clocks(const char ** clk_names,u8 num_clocks)564  void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
565  {
566  	struct clk *init_clk;
567  	int i;
568  
569  	for (i = 0; i < num_clocks; i++) {
570  		init_clk = clk_get(NULL, clk_names[i]);
571  		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
572  			 clk_names[i]))
573  			continue;
574  		clk_prepare_enable(init_clk);
575  	}
576  }
577  
578  /**
579   * ti_clk_add_alias - add a clock alias for a TI clock
580   * @clk: clock handle to create alias for
581   * @con: connection ID for this clock
582   *
583   * Creates a clock alias for a TI clock. Allocates the clock lookup entry
584   * and assigns the data to it. Returns 0 if successful, negative error
585   * value otherwise.
586   */
ti_clk_add_alias(struct clk * clk,const char * con)587  int ti_clk_add_alias(struct clk *clk, const char *con)
588  {
589  	struct clk_lookup *cl;
590  
591  	if (!clk)
592  		return 0;
593  
594  	if (IS_ERR(clk))
595  		return PTR_ERR(clk);
596  
597  	cl = kzalloc(sizeof(*cl), GFP_KERNEL);
598  	if (!cl)
599  		return -ENOMEM;
600  
601  	cl->con_id = con;
602  	cl->clk = clk;
603  
604  	clkdev_add(cl);
605  
606  	return 0;
607  }
608  
609  /**
610   * of_ti_clk_register - register a TI clock to the common clock framework
611   * @node: device node for this clock
612   * @hw: hardware clock handle
613   * @con: connection ID for this clock
614   *
615   * Registers a TI clock to the common clock framework, and adds a clock
616   * alias for it. Returns a handle to the registered clock if successful,
617   * ERR_PTR value in failure.
618   */
of_ti_clk_register(struct device_node * node,struct clk_hw * hw,const char * con)619  struct clk *of_ti_clk_register(struct device_node *node, struct clk_hw *hw,
620  			       const char *con)
621  {
622  	struct clk *clk;
623  	int ret;
624  
625  	ret = of_clk_hw_register(node, hw);
626  	if (ret)
627  		return ERR_PTR(ret);
628  
629  	clk = hw->clk;
630  	ret = ti_clk_add_alias(clk, con);
631  	if (ret) {
632  		clk_unregister(clk);
633  		return ERR_PTR(ret);
634  	}
635  
636  	return clk;
637  }
638  
639  /**
640   * of_ti_clk_register_omap_hw - register a clk_hw_omap to the clock framework
641   * @node: device node for this clock
642   * @hw: hardware clock handle
643   * @con: connection ID for this clock
644   *
645   * Registers a clk_hw_omap clock to the clock framewor, adds a clock alias
646   * for it, and adds the list to the available clk_hw_omap type clocks.
647   * Returns a handle to the registered clock if successful, ERR_PTR value
648   * in failure.
649   */
of_ti_clk_register_omap_hw(struct device_node * node,struct clk_hw * hw,const char * con)650  struct clk *of_ti_clk_register_omap_hw(struct device_node *node,
651  				       struct clk_hw *hw, const char *con)
652  {
653  	struct clk *clk;
654  	struct clk_hw_omap *oclk;
655  
656  	clk = of_ti_clk_register(node, hw, con);
657  	if (IS_ERR(clk))
658  		return clk;
659  
660  	oclk = to_clk_hw_omap(hw);
661  
662  	list_add(&oclk->node, &clk_hw_omap_clocks);
663  
664  	return clk;
665  }
666  
667  /**
668   * omap2_clk_for_each - call function for each registered clk_hw_omap
669   * @fn: pointer to a callback function
670   *
671   * Call @fn for each registered clk_hw_omap, passing @hw to each
672   * function.  @fn must return 0 for success or any other value for
673   * failure.  If @fn returns non-zero, the iteration across clocks
674   * will stop and the non-zero return value will be passed to the
675   * caller of omap2_clk_for_each().
676   */
omap2_clk_for_each(int (* fn)(struct clk_hw_omap * hw))677  int omap2_clk_for_each(int (*fn)(struct clk_hw_omap *hw))
678  {
679  	int ret;
680  	struct clk_hw_omap *hw;
681  
682  	list_for_each_entry(hw, &clk_hw_omap_clocks, node) {
683  		ret = (*fn)(hw);
684  		if (ret)
685  			break;
686  	}
687  
688  	return ret;
689  }
690  
691  /**
692   * omap2_clk_is_hw_omap - check if the provided clk_hw is OMAP clock
693   * @hw: clk_hw to check if it is an omap clock or not
694   *
695   * Checks if the provided clk_hw is OMAP clock or not. Returns true if
696   * it is, false otherwise.
697   */
omap2_clk_is_hw_omap(struct clk_hw * hw)698  bool omap2_clk_is_hw_omap(struct clk_hw *hw)
699  {
700  	struct clk_hw_omap *oclk;
701  
702  	list_for_each_entry(oclk, &clk_hw_omap_clocks, node) {
703  		if (&oclk->hw == hw)
704  			return true;
705  	}
706  
707  	return false;
708  }
709