1 # SPDX-License-Identifier: GPL-2.0 2 # 3 # ACPI Configuration 4 # 5 6 config ARCH_SUPPORTS_ACPI 7 bool 8 9 menuconfig ACPI 10 bool "ACPI (Advanced Configuration and Power Interface) Support" 11 depends on ARCH_SUPPORTS_ACPI 12 select PNP 13 select NLS 14 select CRC32 15 select FIRMWARE_TABLE 16 default y if X86 17 help 18 Advanced Configuration and Power Interface (ACPI) support for 19 Linux requires an ACPI-compliant platform (hardware/firmware), 20 and assumes the presence of OS-directed configuration and power 21 management (OSPM) software. This option will enlarge your 22 kernel by about 70K. 23 24 Linux ACPI provides a robust functional replacement for several 25 legacy configuration and power management interfaces, including 26 the Plug-and-Play BIOS specification (PnP BIOS), the 27 MultiProcessor Specification (MPS), and the Advanced Power 28 Management (APM) specification. If both ACPI and APM support 29 are configured, ACPI is used. 30 31 Linux support for ACPI is based on Intel Corporation's ACPI 32 Component Architecture (ACPI CA). For more information on the 33 ACPI CA, see: 34 <https://acpica.org/> 35 36 ACPI is an open industry specification originally co-developed by 37 Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba. Currently, 38 it is developed by the ACPI Specification Working Group (ASWG) under 39 the UEFI Forum and any UEFI member can join the ASWG and contribute 40 to the ACPI specification. 41 The specification is available at: 42 <https://uefi.org/specifications> 43 44 if ACPI 45 46 config ACPI_LEGACY_TABLES_LOOKUP 47 bool 48 49 config ARCH_MIGHT_HAVE_ACPI_PDC 50 bool 51 52 config ACPI_GENERIC_GSI 53 bool 54 55 config ACPI_SYSTEM_POWER_STATES_SUPPORT 56 bool 57 58 config ACPI_CCA_REQUIRED 59 bool 60 61 config ACPI_TABLE_LIB 62 bool 63 64 config ACPI_THERMAL_LIB 65 depends on THERMAL 66 bool 67 68 config ACPI_DEBUGGER 69 bool "AML debugger interface" 70 select ACPI_DEBUG 71 help 72 Enable in-kernel debugging of AML facilities: statistics, 73 internal object dump, single step control method execution. 74 This is still under development, currently enabling this only 75 results in the compilation of the ACPICA debugger files. 76 77 if ACPI_DEBUGGER 78 79 config ACPI_DEBUGGER_USER 80 tristate "Userspace debugger accessibility" 81 depends on DEBUG_FS 82 help 83 Export /sys/kernel/debug/acpi/acpidbg for userspace utilities 84 to access the debugger functionalities. 85 86 endif 87 88 config ACPI_SPCR_TABLE 89 bool "ACPI Serial Port Console Redirection Support" 90 default y if X86 91 help 92 Enable support for Serial Port Console Redirection (SPCR) Table. 93 This table provides information about the configuration of the 94 earlycon console. 95 96 config ACPI_FPDT 97 bool "ACPI Firmware Performance Data Table (FPDT) support" 98 depends on X86_64 || ARM64 99 help 100 Enable support for the Firmware Performance Data Table (FPDT). 101 This table provides information on the timing of the system 102 boot, S3 suspend and S3 resume firmware code paths. 103 104 config ACPI_LPIT 105 bool 106 depends on X86_64 107 default y 108 109 config ACPI_SLEEP 110 bool 111 depends on SUSPEND || HIBERNATION 112 depends on ACPI_SYSTEM_POWER_STATES_SUPPORT 113 default y 114 115 config ACPI_REV_OVERRIDE_POSSIBLE 116 bool "Allow supported ACPI revision to be overridden" 117 depends on X86 118 default y 119 help 120 The platform firmware on some systems expects Linux to return "5" as 121 the supported ACPI revision which makes it expose system configuration 122 information in a special way. 123 124 For example, based on what ACPI exports as the supported revision, 125 Dell XPS 13 (2015) configures its audio device to either work in HDA 126 mode or in I2S mode, where the former is supposed to be used on Linux 127 until the latter is fully supported (in the kernel as well as in user 128 space). 129 130 This option enables a DMI-based quirk for the above Dell machine (so 131 that HDA audio is exposed by the platform firmware to the kernel) and 132 makes it possible to force the kernel to return "5" as the supported 133 ACPI revision via the "acpi_rev_override" command line switch. 134 135 config ACPI_EC_DEBUGFS 136 tristate "EC read/write access through /sys/kernel/debug/ec" 137 help 138 Say N to disable Embedded Controller /sys/kernel/debug interface 139 140 Be aware that using this interface can confuse your Embedded 141 Controller in a way that a normal reboot is not enough. You then 142 have to power off your system, and remove the laptop battery for 143 some seconds. 144 An Embedded Controller typically is available on laptops and reads 145 sensor values like battery state and temperature. 146 The kernel accesses the EC through ACPI parsed code provided by BIOS 147 tables. This option allows to access the EC directly without ACPI 148 code being involved. 149 Thus this option is a debug option that helps to write ACPI drivers 150 and can be used to identify ACPI code or EC firmware bugs. 151 152 config ACPI_AC 153 tristate "AC Adapter" 154 select POWER_SUPPLY 155 default y 156 help 157 This driver supports the AC Adapter object, which indicates 158 whether a system is on AC or not. If you have a system that can 159 switch between A/C and battery, say Y. 160 161 To compile this driver as a module, choose M here: 162 the module will be called ac. 163 164 config ACPI_BATTERY 165 tristate "Battery" 166 select POWER_SUPPLY 167 default y 168 help 169 This driver adds support for battery information through 170 /proc/acpi/battery. If you have a mobile system with a battery, 171 say Y. 172 173 To compile this driver as a module, choose M here: 174 the module will be called battery. 175 176 config ACPI_BUTTON 177 tristate "Button" 178 depends on INPUT 179 default y 180 help 181 This driver handles events on the power, sleep, and lid buttons. 182 A daemon reads events from input devices or via netlink and 183 performs user-defined actions such as shutting down the system. 184 This is necessary for software-controlled poweroff. 185 186 To compile this driver as a module, choose M here: 187 the module will be called button. 188 189 config ACPI_TINY_POWER_BUTTON 190 tristate "Tiny Power Button Driver" 191 depends on !ACPI_BUTTON 192 help 193 This driver provides a tiny alternative to the ACPI Button driver. 194 The tiny power button driver only handles the power button. Rather 195 than notifying userspace via the input layer or a netlink event, this 196 driver directly signals the init process to shut down. 197 198 This driver is particularly suitable for cloud and VM environments, 199 which use a simulated power button to initiate a controlled poweroff, 200 but which may not want to run a separate userspace daemon to process 201 input events. 202 203 config ACPI_TINY_POWER_BUTTON_SIGNAL 204 int "Tiny Power Button Signal" 205 depends on ACPI_TINY_POWER_BUTTON 206 default 38 207 help 208 Default signal to send to init in response to the power button. 209 210 Likely values here include 38 (SIGRTMIN+4) to power off, or 2 211 (SIGINT) to simulate Ctrl+Alt+Del. 212 213 config ACPI_VIDEO 214 tristate "Video" 215 depends on BACKLIGHT_CLASS_DEVICE 216 depends on INPUT 217 depends on ACPI_WMI || !X86 218 select THERMAL 219 help 220 This driver implements the ACPI Extensions For Display Adapters 221 for integrated graphics devices on motherboard, as specified in 222 ACPI 2.0 Specification, Appendix B. This supports basic operations 223 such as defining the video POST device, retrieving EDID information, 224 and setting up a video output. 225 226 To compile this driver as a module, choose M here: 227 the module will be called video. 228 229 config ACPI_FAN 230 tristate "Fan" 231 depends on THERMAL 232 default y 233 help 234 This driver supports ACPI fan devices, allowing user-mode 235 applications to perform basic fan control (on, off, status). 236 237 To compile this driver as a module, choose M here: 238 the module will be called fan. 239 240 config ACPI_TAD 241 tristate "ACPI Time and Alarm (TAD) Device Support" 242 depends on SYSFS && PM_SLEEP 243 help 244 The ACPI Time and Alarm (TAD) device is an alternative to the Real 245 Time Clock (RTC). Its wake timers allow the system to transition from 246 the S3 (or optionally S4/S5) state to S0 state after a time period 247 elapses. In comparison with the RTC Alarm, the TAD provides a larger 248 scale of flexibility in the wake timers. The time capabilities of the 249 TAD maintain the time of day information across platform power 250 transitions, and keep track of time even when the platform is turned 251 off. 252 253 config ACPI_DOCK 254 bool "Dock" 255 help 256 This driver supports ACPI-controlled docking stations and removable 257 drive bays such as the IBM Ultrabay and the Dell Module Bay. 258 259 config ACPI_CPU_FREQ_PSS 260 bool 261 262 config ACPI_PROCESSOR_CSTATE 263 def_bool y 264 depends on ACPI_PROCESSOR 265 depends on X86 266 267 config ACPI_PROCESSOR_IDLE 268 bool 269 select CPU_IDLE 270 271 config ACPI_MCFG 272 bool 273 274 config ACPI_CPPC_LIB 275 bool 276 depends on ACPI_PROCESSOR 277 select MAILBOX 278 select PCC 279 help 280 If this option is enabled, this file implements common functionality 281 to parse CPPC tables as described in the ACPI 5.1+ spec. The 282 routines implemented are meant to be used by other 283 drivers to control CPU performance using CPPC semantics. 284 If your platform does not support CPPC in firmware, 285 leave this option disabled. 286 287 config ACPI_PROCESSOR 288 tristate "Processor" 289 depends on X86 || ARM64 || LOONGARCH || RISCV 290 select ACPI_PROCESSOR_IDLE 291 select ACPI_CPU_FREQ_PSS if X86 || LOONGARCH 292 select THERMAL 293 default y 294 help 295 This driver adds support for the ACPI Processor package. It is required 296 by several flavors of cpufreq performance-state, thermal, throttling and 297 idle drivers. 298 299 To compile this driver as a module, choose M here: 300 the module will be called processor. 301 302 config ACPI_IPMI 303 tristate "IPMI" 304 depends on IPMI_HANDLER 305 help 306 This driver enables the ACPI to access the BMC controller. And it 307 uses the IPMI request/response message to communicate with BMC 308 controller, which can be found on the server. 309 310 To compile this driver as a module, choose M here: 311 the module will be called as acpi_ipmi. 312 313 config ACPI_HOTPLUG_CPU 314 bool 315 depends on ACPI_PROCESSOR && HOTPLUG_CPU 316 select ACPI_CONTAINER 317 318 config ACPI_PROCESSOR_AGGREGATOR 319 tristate "Processor Aggregator" 320 depends on ACPI_PROCESSOR 321 depends on X86 322 help 323 ACPI 4.0 defines processor Aggregator, which enables OS to perform 324 specific processor configuration and control that applies to all 325 processors in the platform. Currently only logical processor idling 326 is defined, which is to reduce power consumption. This driver 327 supports the new device. 328 329 config ACPI_THERMAL 330 tristate "Thermal Zone" 331 depends on ACPI_PROCESSOR 332 select THERMAL 333 select ACPI_THERMAL_LIB 334 default y 335 help 336 This driver supports ACPI thermal zones. Most mobile and 337 some desktop systems support ACPI thermal zones. It is HIGHLY 338 recommended that this option be enabled, as your processor(s) 339 may be damaged without it. 340 341 To compile this driver as a module, choose M here: 342 the module will be called thermal. 343 344 config ACPI_PLATFORM_PROFILE 345 tristate 346 347 config ACPI_CUSTOM_DSDT_FILE 348 string "Custom DSDT Table file to include" 349 default "" 350 depends on !STANDALONE 351 help 352 This option supports a custom DSDT by linking it into the kernel. 353 354 Enter the full path name to the file which includes the AmlCode 355 or dsdt_aml_code declaration. 356 357 If unsure, don't enter a file name. 358 359 config ACPI_CUSTOM_DSDT 360 bool 361 default ACPI_CUSTOM_DSDT_FILE != "" 362 363 config ARCH_HAS_ACPI_TABLE_UPGRADE 364 def_bool n 365 366 config ACPI_TABLE_UPGRADE 367 bool "Allow upgrading ACPI tables via initrd" 368 depends on BLK_DEV_INITRD && ARCH_HAS_ACPI_TABLE_UPGRADE 369 default y 370 help 371 This option provides functionality to upgrade arbitrary ACPI tables 372 via initrd. No functional change if no ACPI tables are passed via 373 initrd, therefore it's safe to say Y. 374 See Documentation/admin-guide/acpi/initrd_table_override.rst for details 375 376 config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD 377 bool "Override ACPI tables from built-in initrd" 378 depends on ACPI_TABLE_UPGRADE 379 depends on INITRAMFS_SOURCE!="" && INITRAMFS_COMPRESSION_NONE 380 help 381 This option provides functionality to override arbitrary ACPI tables 382 from built-in uncompressed initrd. 383 384 See Documentation/admin-guide/acpi/initrd_table_override.rst for details 385 386 config ACPI_DEBUG 387 bool "Debug Statements" 388 help 389 The ACPI subsystem can produce debug output. Saying Y enables this 390 output and increases the kernel size by around 50K. 391 392 Use the acpi.debug_layer and acpi.debug_level kernel command-line 393 parameters documented in Documentation/firmware-guide/acpi/debug.rst and 394 Documentation/admin-guide/kernel-parameters.rst to control the type and 395 amount of debug output. 396 397 config ACPI_PCI_SLOT 398 bool "PCI slot detection driver" 399 depends on SYSFS && PCI 400 help 401 This driver creates entries in /sys/bus/pci/slots/ for all PCI 402 slots in the system. This can help correlate PCI bus addresses, 403 i.e., segment/bus/device/function tuples, with physical slots in 404 the system. If you are unsure, say N. 405 406 config ACPI_CONTAINER 407 bool "Container and Module Devices" 408 default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU) 409 help 410 This driver supports ACPI Container and Module devices (IDs 411 ACPI0004, PNP0A05, and PNP0A06). 412 413 This helps support hotplug of nodes, CPUs, and memory. 414 415 config ACPI_HOTPLUG_MEMORY 416 bool "Memory Hotplug" 417 depends on MEMORY_HOTPLUG 418 help 419 This driver supports ACPI memory hotplug. The driver 420 fields notifications on ACPI memory devices (PNP0C80), 421 which represent memory ranges that may be onlined or 422 offlined during runtime. 423 424 If your hardware and firmware do not support adding or 425 removing memory devices at runtime, you need not enable 426 this driver. 427 428 config ACPI_HOTPLUG_IOAPIC 429 bool 430 depends on PCI 431 depends on X86_IO_APIC 432 default y 433 434 config ACPI_SBS 435 tristate "Smart Battery System" 436 depends on X86 437 select POWER_SUPPLY 438 help 439 This driver supports the Smart Battery System, another 440 type of access to battery information, found on some laptops. 441 442 To compile this driver as a module, choose M here: 443 the modules will be called sbs and sbshc. 444 445 config ACPI_HED 446 tristate "Hardware Error Device" 447 help 448 This driver supports the Hardware Error Device (PNP0C33), 449 which is used to report some hardware errors notified via 450 SCI, mainly the corrected errors. 451 452 config ACPI_BGRT 453 bool "Boottime Graphics Resource Table support" 454 depends on EFI && (X86 || ARM64 || LOONGARCH) 455 help 456 This driver adds support for exposing the ACPI Boottime Graphics 457 Resource Table, which allows the operating system to obtain 458 data from the firmware boot splash. It will appear under 459 /sys/firmware/acpi/bgrt/ . 460 461 config ACPI_REDUCED_HARDWARE_ONLY 462 bool "Hardware-reduced ACPI support only" if EXPERT 463 help 464 This config item changes the way the ACPI code is built. When this 465 option is selected, the kernel will use a specialized version of 466 ACPICA that ONLY supports the ACPI "reduced hardware" mode. The 467 resulting kernel will be smaller but it will also be restricted to 468 running in ACPI reduced hardware mode ONLY. 469 470 If you are unsure what to do, do not enable this option. 471 472 config ACPI_NHLT 473 bool 474 475 source "drivers/acpi/nfit/Kconfig" 476 source "drivers/acpi/numa/Kconfig" 477 source "drivers/acpi/apei/Kconfig" 478 source "drivers/acpi/dptf/Kconfig" 479 480 config ACPI_WATCHDOG 481 bool 482 483 config ACPI_EXTLOG 484 tristate "Extended Error Log support" 485 depends on X86_MCE && X86_LOCAL_APIC && EDAC 486 select UEFI_CPER 487 help 488 Certain usages such as Predictive Failure Analysis (PFA) require 489 more information about the error than what can be described in 490 processor machine check banks. Most server processors log 491 additional information about the error in processor uncore 492 registers. Since the addresses and layout of these registers vary 493 widely from one processor to another, system software cannot 494 readily make use of them. To complicate matters further, some of 495 the additional error information cannot be constructed without 496 detailed knowledge about platform topology. 497 498 Enhanced MCA Logging allows firmware to provide additional error 499 information to system software, synchronous with MCE or CMCI. This 500 driver adds support for that functionality with corresponding 501 tracepoint which carries that information to userspace. 502 503 config ACPI_ADXL 504 bool 505 506 config ACPI_CONFIGFS 507 tristate "ACPI configfs support" 508 select CONFIGFS_FS 509 help 510 Select this option to enable support for ACPI configuration from 511 userspace. The configurable ACPI groups will be visible under 512 /config/acpi, assuming configfs is mounted under /config. 513 514 config ACPI_PFRUT 515 tristate "ACPI Platform Firmware Runtime Update and Telemetry" 516 depends on 64BIT 517 help 518 This mechanism allows certain pieces of the platform firmware 519 to be updated on the fly while the system is running (runtime) 520 without the need to restart it, which is key in the cases when 521 the system needs to be available 100% of the time and it cannot 522 afford the downtime related to restarting it, or when the work 523 carried out by the system is particularly important, so it cannot 524 be interrupted, and it is not practical to wait until it is complete. 525 526 The existing firmware code can be modified (driver update) or 527 extended by adding new code to the firmware (code injection). 528 529 Besides, the telemetry driver allows user space to fetch telemetry 530 data from the firmware with the help of the Platform Firmware Runtime 531 Telemetry interface. 532 533 To compile the drivers as modules, choose M here: 534 the modules will be called pfr_update and pfr_telemetry. 535 536 if ARM64 537 source "drivers/acpi/arm64/Kconfig" 538 endif 539 540 config ACPI_PPTT 541 bool 542 543 config ACPI_PCC 544 bool "ACPI PCC Address Space" 545 depends on PCC 546 default y 547 help 548 The PCC Address Space also referred as PCC Operation Region pertains 549 to the region of PCC subspace that succeeds the PCC signature. 550 551 The PCC Operation Region works in conjunction with the PCC Table 552 (Platform Communications Channel Table). PCC subspaces that are 553 marked for use as PCC Operation Regions must not be used as PCC 554 subspaces for the standard ACPI features such as CPPC, RASF, PDTT and 555 MPST. These standard features must always use the PCC Table instead. 556 557 Enable this feature if you want to set up and install the PCC Address 558 Space handler to handle PCC OpRegion in the firmware. 559 560 config ACPI_FFH 561 bool "ACPI FFH Address Space" 562 default n 563 help 564 The FFH(Fixed Function Hardware) Address Space also referred as FFH 565 Operation Region allows to define platform specific opregion. 566 567 Enable this feature if you want to set up and install the FFH Address 568 Space handler to handle FFH OpRegion in the firmware. 569 570 source "drivers/acpi/pmic/Kconfig" 571 572 config ACPI_VIOT 573 bool 574 575 config ACPI_PRMT 576 bool "Platform Runtime Mechanism Support" 577 depends on EFI_RUNTIME_WRAPPERS && (X86_64 || ARM64) 578 default y 579 help 580 Platform Runtime Mechanism (PRM) is a firmware interface exposing a 581 set of binary executables that can be called from the AML interpreter 582 or directly from device drivers. 583 584 Say Y to enable the AML interpreter to execute the PRM code. 585 586 While this feature is optional in principle, leaving it out may 587 substantially increase computational overhead related to the 588 initialization of some server systems. 589 590 endif # ACPI 591 592 config X86_PM_TIMER 593 bool "Power Management Timer Support" if EXPERT 594 depends on X86 && (ACPI || JAILHOUSE_GUEST) 595 default y 596 help 597 The Power Management Timer is available on all ACPI-capable, 598 in most cases even if ACPI is unusable or blacklisted. 599 600 This timing source is not affected by power management features 601 like aggressive processor idling, throttling, frequency and/or 602 voltage scaling, unlike the commonly used Time Stamp Counter 603 (TSC) timing source. 604 605 You should nearly always say Y here because many modern 606 systems require this timer. 607