| /linux-6.12.1/drivers/net/ethernet/qualcomm/ |
| D | qca_spi.c | 70 start_spi_intr_handling(struct qcaspi *qca, u16 *intr_cause) in start_spi_intr_handling() argument
74 qcaspi_write_register(qca, SPI_REG_INTR_ENABLE, 0, wr_verify); in start_spi_intr_handling()
75 qcaspi_read_register(qca, SPI_REG_INTR_CAUSE, intr_cause); in start_spi_intr_handling()
76 netdev_dbg(qca->net_dev, "interrupts: 0x%04x\n", *intr_cause); in start_spi_intr_handling()
80 end_spi_intr_handling(struct qcaspi *qca, u16 intr_cause) in end_spi_intr_handling() argument
87 qcaspi_write_register(qca, SPI_REG_INTR_CAUSE, intr_cause, 0); in end_spi_intr_handling()
88 qcaspi_write_register(qca, SPI_REG_INTR_ENABLE, intr_enable, wr_verify); in end_spi_intr_handling()
89 netdev_dbg(qca->net_dev, "acking int: 0x%04x\n", intr_cause); in end_spi_intr_handling()
93 qcaspi_write_burst(struct qcaspi *qca, u8 *src, u32 len) in qcaspi_write_burst() argument
111 ret = spi_sync(qca->spi_dev, &msg); in qcaspi_write_burst()
[all …]
|
| D | qca_uart.c | 51 struct qcauart *qca = serdev_device_get_drvdata(serdev); in qca_tty_receive() local
52 struct net_device *netdev = qca->net_dev; in qca_tty_receive()
56 if (!qca->rx_skb) { in qca_tty_receive()
57 qca->rx_skb = netdev_alloc_skb_ip_align(netdev, in qca_tty_receive()
60 if (!qca->rx_skb) { in qca_tty_receive()
70 retcode = qcafrm_fsm_decode(&qca->frm_handle, in qca_tty_receive()
71 qca->rx_skb->data, in qca_tty_receive()
72 skb_tailroom(qca->rx_skb), in qca_tty_receive()
92 skb_put(qca->rx_skb, retcode); in qca_tty_receive()
93 qca->rx_skb->protocol = eth_type_trans( in qca_tty_receive()
[all …]
|
| D | qca_debug.c | 62 struct qcaspi *qca = s->private; in qcaspi_info_show() local
65 (unsigned long)qca->buffer_size); in qcaspi_info_show()
69 if (qca->txr.skb[qca->txr.head] == NULL) in qcaspi_info_show()
71 else if (qca->txr.skb[qca->txr.tail]) in qcaspi_info_show()
79 qca->txr.size); in qcaspi_info_show()
82 (unsigned int)qca->sync); in qcaspi_info_show()
83 switch (qca->sync) { in qcaspi_info_show()
100 qca->spi_dev->irq); in qcaspi_info_show()
102 qca->intr); in qcaspi_info_show()
105 (unsigned long)qca->spi_dev->max_speed_hz); in qcaspi_info_show()
[all …]
|
| D | qca_7k.c | 18 qcaspi_spi_error(struct qcaspi *qca) in qcaspi_spi_error() argument
20 if (qca->sync != QCASPI_SYNC_READY) in qcaspi_spi_error()
23 netdev_err(qca->net_dev, "spi error\n"); in qcaspi_spi_error()
24 qca->sync = QCASPI_SYNC_UNKNOWN; in qcaspi_spi_error()
25 qca->stats.spi_err++; in qcaspi_spi_error()
29 qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result) in qcaspi_read_register() argument
51 if (qca->legacy_mode) { in qcaspi_read_register()
52 spi_sync(qca->spi_dev, &msg); in qcaspi_read_register()
56 ret = spi_sync(qca->spi_dev, &msg); in qcaspi_read_register()
62 qcaspi_spi_error(qca); in qcaspi_read_register()
[all …]
|
| D | qca_7k.h | 53 void qcaspi_spi_error(struct qcaspi *qca);
54 int qcaspi_read_register(struct qcaspi *qca, u16 reg, u16 *result);
55 int qcaspi_write_register(struct qcaspi *qca, u16 reg, u16 value, int retry);
|
| D | qca_debug.h | 15 void qcaspi_init_device_debugfs(struct qcaspi *qca);
17 void qcaspi_remove_device_debugfs(struct qcaspi *qca);
|
| /linux-6.12.1/drivers/bluetooth/ |
| D | hci_qca.c | 286 struct qca_data *qca = hu->priv; in serial_clock_vote() local
289 bool old_vote = (qca->tx_vote | qca->rx_vote); in serial_clock_vote()
294 diff = jiffies_to_msecs(jiffies - qca->vote_last_jif); in serial_clock_vote()
297 qca->vote_off_ms += diff; in serial_clock_vote()
299 qca->vote_on_ms += diff; in serial_clock_vote()
303 qca->tx_vote = true; in serial_clock_vote()
304 qca->tx_votes_on++; in serial_clock_vote()
308 qca->rx_vote = true; in serial_clock_vote()
309 qca->rx_votes_on++; in serial_clock_vote()
313 qca->tx_vote = false; in serial_clock_vote()
[all …]
|
| /linux-6.12.1/Documentation/devicetree/bindings/mips/ |
| D | ath79-soc.txt | 7 - qca,ar7130
8 - qca,ar7141
9 - qca,ar7161
10 - qca,ar7240
11 - qca,ar7241
12 - qca,ar7242
13 - qca,ar9130
14 - qca,ar9132
15 - qca,ar9330
16 - qca,ar9331
[all …]
|
| /linux-6.12.1/arch/mips/boot/dts/qca/ |
| D | ar9132.dtsi | 5 compatible = "qca,ar9132";
23 compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
28 qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
29 qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
52 compatible = "qca,ar9132-ddr-controller",
53 "qca,ar7240-ddr-controller";
56 #qca,ddr-wb-channel-cells = <1>;
75 compatible = "qca,ar9132-gpio",
76 "qca,ar7100-gpio";
90 compatible = "qca,ar9132-pll",
[all …]
|
| D | ar9331.dtsi | 5 compatible = "qca,ar9331";
23 compatible = "qca,ar7100-cpu-intc";
28 qca,ddr-wb-channel-interrupts = <2>, <3>;
29 qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
56 compatible = "qca,ar7240-ddr-controller";
59 #qca,ddr-wb-channel-cells = <1>;
63 compatible = "qca,ar9330-uart";
75 compatible = "qca,ar7100-gpio";
91 compatible = "qca,ar9330-pll";
101 compatible = "qca,ar7240-misc-intc";
[all …]
|
| /linux-6.12.1/Documentation/devicetree/bindings/interrupt-controller/ |
| D | qca,ath79-cpu-intc.txt | 5 qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
9 - compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
20 - qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
22 - qca,ddr-wb-channels: List of phandles to the write buffer channels for
23 each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
29 compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
34 qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
35 qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
43 #qca,ddr-wb-channel-cells = <1>;
|
| D | qca,ath79-misc-intc.txt | 7 - compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
8 "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
24 compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
37 compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
|
| /linux-6.12.1/Documentation/devicetree/bindings/clock/ |
| D | qca,ath79-pll.txt | 6 - compatible: has to be "qca,<soctype>-pll" and one of the following
8 - "qca,ar7100-pll"
9 - "qca,ar7240-pll"
10 - "qca,ar9130-pll"
11 - "qca,ar9330-pll"
12 - "qca,ar9340-pll"
13 - "qca,qca9550-pll"
25 compatible = "qca,ar9132-pll", "qca,ar9130-pll";
|
| /linux-6.12.1/Documentation/devicetree/bindings/gpio/ |
| D | gpio-ath79.txt | 4 - compatible: has to be "qca,<soctype>-gpio" and one of the following
6 - "qca,ar7100-gpio"
7 - "qca,ar9340-gpio"
26 compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
|
| /linux-6.12.1/Documentation/devicetree/bindings/spi/ |
| D | spi-ath79.txt | 4 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
16 compatible = "qca,ar9132-spi", "qca,ar7100-spi";
|
| /linux-6.12.1/arch/arm64/boot/dts/freescale/ |
| D | fsl-ls1028a-kontron-sl28-var4.dts | 14 #include <dt-bindings/net/qca-ar803x.h>
26 qca,clk-out-frequency = <125000000>;
27 qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
28 qca,keep-pll-enabled;
|
| D | fsl-ls1028a-kontron-sl28-var1.dts | 17 #include <dt-bindings/net/qca-ar803x.h>
32 qca,clk-out-frequency = <125000000>;
33 qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
34 qca,keep-pll-enabled;
|
| /linux-6.12.1/arch/arm/boot/dts/broadcom/ |
| D | bcm958625-meraki-alamo.dtsi | 109 compatible = "qca,qca8337";
120 qca,sgmii-enable-pll;
121 qca,sgmii-txclk-falling-edge;
187 compatible = "qca,qca8337";
198 qca,sgmii-enable-pll;
199 qca,sgmii-txclk-falling-edge;
|
| /linux-6.12.1/Documentation/devicetree/bindings/net/ |
| D | qca,qca7000.txt | 13 - compatible : Should be "qca,qca7000"
26 - qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode.
47 compatible = "qca,qca7000";
66 - compatible : Should be "qca,qca7000"
83 compatible = "qca,qca7000";
|
| /linux-6.12.1/Documentation/devicetree/bindings/phy/ |
| D | phy-ath79-usb.txt | 4 - compatible: "qca,ar7100-usb-phy"
12 compatible = "qca,ar7100-usb-phy";
|
| /linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
| D | imx6ull-tarragon-master.dts | 39 compatible = "qca,qca7000";
57 compatible = "qca,qca7000";
|
| D | imx6qdl-sr-som.dtsi | 77 qca,clk-out-frequency = <125000000>;
78 qca,smarteee-tw-us-1g = <24>;
83 qca,clk-out-frequency = <125000000>;
84 qca,smarteee-tw-us-1g = <24>;
|
| D | imx6ull-tarragon-slave.dts | 17 compatible = "qca,qca7000";
|
| /linux-6.12.1/arch/mips/boot/dts/ |
| D | Makefile | 15 subdir-$(CONFIG_ATH79) += qca
|
| /linux-6.12.1/drivers/net/dsa/ |
| D | Makefile | 25 obj-y += qca/
|