/linux-6.12.1/drivers/iio/light/ |
D | bh1750.c | 84 ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); in bh1750_change_int_time() 89 ret = i2c_smbus_write_byte(data->client, in bh1750_change_int_time() 95 ret = i2c_smbus_write_byte(data->client, in bh1750_change_int_time() 116 ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE); in bh1750_read() 274 i2c_smbus_write_byte(client, BH1750_POWER_DOWN); in bh1750_remove() 289 ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); in bh1750_suspend()
|
D | veml6070.c | 48 ret = i2c_smbus_write_byte(data->client1, in veml6070_read() 66 ret = i2c_smbus_write_byte(data->client1, data->config); in veml6070_read() 167 ret = i2c_smbus_write_byte(data->client1, data->config); in veml6070_probe()
|
/linux-6.12.1/drivers/input/touchscreen/ |
D | stmfts.c | 324 err = i2c_smbus_write_byte(sdata->client, cmd); in stmfts_command() 344 err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_ON); in stmfts_input_open() 354 err = i2c_smbus_write_byte(sdata->client, in stmfts_input_open() 363 err = i2c_smbus_write_byte(sdata->client, in stmfts_input_open() 379 err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_OFF); in stmfts_input_close() 389 err = i2c_smbus_write_byte(sdata->client, in stmfts_input_close() 398 err = i2c_smbus_write_byte(sdata->client, in stmfts_input_close() 488 err = i2c_smbus_write_byte(sdata->client, in stmfts_sysfs_hover_enable_write() 583 (void) i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN); in stmfts_power_on() 743 ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN); in stmfts_runtime_suspend() [all …]
|
D | tsc2004.c | 27 data = i2c_smbus_write_byte(i2c, tx); in tsc2004_cmd()
|
/linux-6.12.1/drivers/iio/pressure/ |
D | ms5611_i2c.c | 25 return i2c_smbus_write_byte(st->client, MS5611_RESET); in ms5611_i2c_reset() 64 ret = i2c_smbus_write_byte(st->client, osr->cmd); in ms5611_i2c_read_adc_temp_and_pressure() 74 ret = i2c_smbus_write_byte(st->client, osr->cmd); in ms5611_i2c_read_adc_temp_and_pressure()
|
D | hp206c.c | 149 ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST); in hp206c_soft_reset() 183 ret = i2c_smbus_write_byte(client, conv_cmd); in hp206c_conv_and_read()
|
/linux-6.12.1/drivers/misc/ |
D | tsl2550.c | 56 int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]); in tsl2550_set_operating_mode() 69 ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN); in tsl2550_set_power_state() 71 ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP); in tsl2550_set_power_state() 321 err = i2c_smbus_write_byte(client, in tsl2550_init_client()
|
D | ad525x_dpot-i2c.c | 16 return i2c_smbus_write_byte(client, val); in write_d8()
|
/linux-6.12.1/drivers/input/misc/ |
D | pcf8574_keypad.c | 50 i2c_smbus_write_byte(lp->client, 240); in read_state() 53 i2c_smbus_write_byte(lp->client, 15); in read_state() 89 if (i2c_smbus_write_byte(client, 240) < 0) { in pcf8574_kp_probe()
|
/linux-6.12.1/drivers/gpio/ |
D | gpio-gw-pld.c | 40 return i2c_smbus_write_byte(gw->client, gw->out); in gw_pld_input8() 62 return i2c_smbus_write_byte(gw->client, gw->out); in gw_pld_output8()
|
/linux-6.12.1/drivers/input/mouse/ |
D | elan_i2c_smbus.c | 77 error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP); in elan_smbus_initialize() 97 return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD); in elan_smbus_sleep_control() 319 error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD); in elan_smbus_iap_reset() 367 if (i2c_smbus_write_byte(client, in elan_smbus_prepare_fw_update()
|
/linux-6.12.1/drivers/watchdog/ |
D | menf21bmc_wdt.c | 62 return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON); in menf21bmc_wdt_start() 98 return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG); in menf21bmc_wdt_ping()
|
/linux-6.12.1/drivers/auxdisplay/ |
D | ht16k33.c | 142 return i2c_smbus_write_byte(priv->client, data); in ht16k33_display_on() 147 return i2c_smbus_write_byte(priv->client, REG_DISPLAY_SETUP); in ht16k33_display_off() 164 return i2c_smbus_write_byte(priv->client, in ht16k33_brightness_set() 198 err = i2c_smbus_write_byte(priv->client, in ht16k33_blink_set() 274 err = i2c_smbus_write_byte(priv->client, byte); in ht16k33_initialize() 282 return i2c_smbus_write_byte(priv->client, byte); in ht16k33_initialize()
|
/linux-6.12.1/drivers/iio/adc/ |
D | ti-ads1119.c | 152 return i2c_smbus_write_byte(st->client, ADS1119_CMD_RESET); in ads1119_reset() 283 ret = i2c_smbus_write_byte(st->client, ADS1119_CMD_START_SYNC); in ads1119_single_conversion() 455 return i2c_smbus_write_byte(st->client, ADS1119_CMD_START_SYNC); in ads1119_triggered_buffer_preenable() 678 i2c_smbus_write_byte(st->client, ADS1119_CMD_POWERDOWN); in ads1119_powerdown() 787 return i2c_smbus_write_byte(st->client, ADS1119_CMD_POWERDOWN); in ads1119_runtime_suspend()
|
D | ltc2485.c | 117 ret = i2c_smbus_write_byte(data->client, LTC2485_CONFIG_DEFAULT); in ltc2485_probe()
|
/linux-6.12.1/drivers/input/keyboard/ |
D | qt2160.c | 118 error = i2c_smbus_write_byte(client, inireg + idx); in qt2160_read_block() 136 error = i2c_smbus_write_byte(client, inireg + idx); in qt2160_read_block() 208 ret = i2c_smbus_write_byte(client, reg); in qt2160_read()
|
/linux-6.12.1/drivers/hwmon/pmbus/ |
D | q54sj108a2.c | 201 rc = i2c_smbus_write_byte(psu->client, PMBUS_CLEAR_FAULTS); in q54sj108a2_debugfs_write() 215 rc = i2c_smbus_write_byte(psu->client, STORE_DEFAULT_ALL); in q54sj108a2_debugfs_write() 241 rc = i2c_smbus_write_byte(psu->client, ERASE_BLACKBOX_DATA); in q54sj108a2_debugfs_write()
|
/linux-6.12.1/drivers/hwmon/ |
D | pcf8591.c | 150 i2c_smbus_write_byte(client, data->control); in out0_enable_store() 268 i2c_smbus_write_byte(client, data->control); in pcf8591_read_channel()
|
/linux-6.12.1/drivers/iio/common/ms_sensors/ |
D | ms_sensors_i2c.c | 52 ret = i2c_smbus_write_byte(client, cmd); in ms_sensors_reset() 112 ret = i2c_smbus_write_byte(client, conv); in ms_sensors_convert_and_read() 258 ret = i2c_smbus_write_byte(client, MS_SENSORS_CONFIG_REG_READ); in ms_sensors_read_config_reg()
|
/linux-6.12.1/drivers/regulator/ |
D | max1586.c | 75 ret = i2c_smbus_write_byte(client, v3_prog); in max1586_v3_set_voltage_sel() 103 ret = i2c_smbus_write_byte(client, v6_prog); in max1586_v6_set_voltage_sel()
|
/linux-6.12.1/drivers/mfd/ |
D | menf21bmc.c | 43 ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD); in menf21bmc_wdt_exit_prod_mode()
|
/linux-6.12.1/drivers/media/i2c/ |
D | tea6415c.c | 100 ret = i2c_smbus_write_byte(client, byte); in tea6415c_s_routing()
|
D | tea6420.c | 71 ret = i2c_smbus_write_byte(client, byte); in tea6420_s_routing()
|
/linux-6.12.1/drivers/iio/humidity/ |
D | hdc100x.c | 176 ret = i2c_smbus_write_byte(client, chan->address); in hdc100x_get_measurement() 326 ret = i2c_smbus_write_byte(client, HDC100X_REG_TEMP); in hdc100x_trigger_handler()
|
/linux-6.12.1/drivers/staging/iio/addac/ |
D | adt7316-i2c.c | 25 ret = i2c_smbus_write_byte(cl, reg); in adt7316_i2c_read()
|