/linux-6.12.1/Documentation/devicetree/bindings/watchdog/ |
D | men-a021-wdt.txt | 19 gpios = <&gpio3 9 1 /* WD_EN */ 20 &gpio3 10 1 /* WD_FAST */ 21 &gpio3 11 1 /* WD_TRIG */ 22 &gpio3 6 1 /* RST_CAUSE[0] */ 23 &gpio3 7 1 /* RST_CAUSE[1] */ 24 &gpio3 8 1>; /* RST_CAUSE[2] */
|
/linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
D | am572x-idk-common.dtsi | 62 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; 68 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; 75 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; 105 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 159 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 165 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 172 id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 173 vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; 177 load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 182 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/arch/arm/boot/dts/nxp/ls/ |
D | ls1021a-moxa-uc-8410a.dts | 45 gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; 51 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; 75 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; 81 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; 87 gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 93 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 99 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 105 gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 117 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/freescale/ |
D | imx8mm-verdin-yavia.dtsi | 20 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; 27 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; 34 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; 41 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 48 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 55 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 79 &gpio3 {
|
D | imx8mm-verdin-mallow.dtsi | 24 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; 32 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; 40 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; 48 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 56 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>; 64 interrupt-parent = <&gpio3>;
|
D | imx8mp-verdin-mallow.dtsi | 36 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; 44 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; 52 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; 60 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 77 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>; 85 interrupt-parent = <&gpio3>;
|
D | imx8mp-verdin-yavia.dtsi | 48 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; 55 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; 62 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; 69 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 76 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 83 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/arch/arm64/boot/dts/rockchip/ |
D | rk3566-anbernic-rg-arc.dtsi | 136 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; 142 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; 148 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 154 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; 160 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; 166 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; 172 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; 178 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; 184 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; 190 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
D | rk3566-anbernic-rg503.dts | 204 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; 210 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; 216 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; 222 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; 228 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; 234 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; 240 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; 246 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 252 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
|
D | rk3326-odroid-go3.dts | 20 mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>, 21 <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; 122 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; 128 gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 133 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; 138 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; 146 reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
D | rk3568-nanopi-r5c.dts | 37 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; 44 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; 50 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; 56 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; 64 reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
D | rk3566-anbernic-rg353x.dtsi | 131 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; 137 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; 143 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; 149 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; 155 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 161 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
D | rk3568-wolfvision-pf5-display.dtsi | 31 cs-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; 32 miso-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; 33 mosi-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; 37 sck-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; 48 reset-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
|
D | rk3566-powkiddy-rk2023.dtsi | 107 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; 113 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; 119 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; 125 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; 131 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; 137 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; 143 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; 149 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; 155 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; 161 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; [all …]
|
/linux-6.12.1/drivers/media/pci/cx88/ |
D | cx88-cards.c | 171 .gpio3 = 0x02000000, 178 .gpio3 = 0x02000000, 185 .gpio3 = 0x02000000, 192 .gpio3 = 0x02000000, 269 .gpio3 = 0x02000000, 276 .gpio3 = 0x02000000, 283 .gpio3 = 0x02000000, 290 .gpio3 = 0x02000000, 864 .gpio3 = 0x00100000, 871 .gpio3 = 0x00100000, [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/hsi/ |
D | nokia-modem.txt | 46 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ 48 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ 49 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ 50 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ 51 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
|
/linux-6.12.1/arch/arm/boot/dts/nxp/mxs/ |
D | imx28-duckbill-2-enocean.dts | 18 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 23 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 28 gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; 40 gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/drivers/pcmcia/ |
D | ti113x.h | 370 u8 gpio3, gpio3_old; in ti12xx_irqroute_func0() local 445 gpio3 = gpio3_old = config_readb(socket, TI1250_GPIO3_CONTROL); in ti12xx_irqroute_func0() 446 gpio3 &= ~TI1250_GPIO_MODE_MASK; in ti12xx_irqroute_func0() 447 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0() 448 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3); in ti12xx_irqroute_func0() 452 gpio3 = gpio3_old = 0; in ti12xx_irqroute_func0() 468 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0() 748 u8 gpio3; in ti12xx_power_hook() local 799 gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL); in ti12xx_power_hook() 801 gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40; in ti12xx_power_hook() [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/sound/ |
D | soc-ac97link.txt | 25 ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
|
/linux-6.12.1/Documentation/devicetree/bindings/arm/ |
D | ste-nomadik.txt | 31 gpios = <&gpio3 19 0x1>; 33 interrupt-parent = <&gpio3>; 36 gpios = <&gpio3 16 0x1>;
|
/linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
D | imx6ull-phytec-tauri.dtsi | 44 gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>; 111 cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>, 112 <&gpio3 10 GPIO_ACTIVE_LOW>, 113 <&gpio3 11 GPIO_ACTIVE_LOW>; 199 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 200 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 208 sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 209 scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 257 rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
|
D | imx53-cx9020.dts | 90 gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; 95 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; 100 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 106 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/drivers/input/touchscreen/ |
D | ad7877.c | 182 bool gpio3; /* P: mutex */ member 195 static bool gpio3; variable 196 module_param(gpio3, bool, 0); 197 MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); 527 return sprintf(buf, "%u\n", ts->gpio3); in ad7877_gpio3_show() 543 ts->gpio3 = !!val; in ad7877_gpio3_store() 545 (ts->gpio4 << 4) | (ts->gpio3 << 5)); in ad7877_gpio3_store() 551 static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store); 576 (ts->gpio4 << 4) | (ts->gpio3 << 5)); in ad7877_gpio4_store() 605 if (gpio3) in ad7877_attr_is_visible() [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nxp/vf/ |
D | vf610-zii-cfu1.dts | 36 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; 42 gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; 48 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; 54 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; 72 tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 171 interrupt-parent = <&gpio3>;
|
/linux-6.12.1/arch/arm64/boot/dts/renesas/ |
D | r8a779f0-spider-ethernet.dtsi | 63 interrupt-parent = <&gpio3>; 81 interrupt-parent = <&gpio3>; 99 interrupt-parent = <&gpio3>;
|