| /linux-6.12.1/drivers/power/supply/ |
| D | rt9455_charger.c | 306 dev_err(dev, "Failed to set RST bit\n"); in rt9455_register_reset()
317 dev_err(dev, "Failed to read RST bit\n"); in rt9455_register_reset()
362 dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n"); in rt9455_charger_get_status()
377 dev_err(&info->client->dev, "Failed to read STAT bits\n"); in rt9455_charger_get_status()
416 dev_err(dev, "Failed to read IRQ1 register\n"); in rt9455_charger_get_health()
435 dev_err(dev, "Failed to read IRQ2 register\n"); in rt9455_charger_get_health()
450 dev_err(dev, "Failed to read IRQ3 register\n"); in rt9455_charger_get_health()
473 dev_err(dev, "Failed to read STAT bits\n"); in rt9455_charger_get_health()
493 dev_err(&info->client->dev, "Failed to read BATAB bit\n"); in rt9455_charger_get_battery_presence()
514 dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n"); in rt9455_charger_get_online()
[all …]
|
| /linux-6.12.1/drivers/mfd/ |
| D | arizona-core.c | 111 dev_err(arizona->dev, "CLKGEN error\n"); in arizona_clkgen_err()
125 dev_err(arizona->dev, "Failed to read underclock status: %d\n", in arizona_underclocked()
131 dev_err(arizona->dev, "AIF3 underclocked\n"); in arizona_underclocked()
133 dev_err(arizona->dev, "AIF2 underclocked\n"); in arizona_underclocked()
135 dev_err(arizona->dev, "AIF1 underclocked\n"); in arizona_underclocked()
137 dev_err(arizona->dev, "ISRC3 underclocked\n"); in arizona_underclocked()
139 dev_err(arizona->dev, "ISRC2 underclocked\n"); in arizona_underclocked()
141 dev_err(arizona->dev, "ISRC1 underclocked\n"); in arizona_underclocked()
143 dev_err(arizona->dev, "FX underclocked\n"); in arizona_underclocked()
145 dev_err(arizona->dev, "ASRC underclocked\n"); in arizona_underclocked()
[all …]
|
| /linux-6.12.1/drivers/pci/controller/ |
| D | pcie-rockchip.c | 75 dev_err(dev, "missing core reset property in node\n"); in rockchip_pcie_parse_dt()
82 dev_err(dev, "missing mgmt reset property in node\n"); in rockchip_pcie_parse_dt()
90 dev_err(dev, "missing mgmt-sticky reset property in node\n"); in rockchip_pcie_parse_dt()
97 dev_err(dev, "missing pipe reset property in node\n"); in rockchip_pcie_parse_dt()
104 dev_err(dev, "missing pm reset property in node\n"); in rockchip_pcie_parse_dt()
111 dev_err(dev, "missing pclk reset property in node\n"); in rockchip_pcie_parse_dt()
118 dev_err(dev, "missing aclk reset property in node\n"); in rockchip_pcie_parse_dt()
132 dev_err(dev, "aclk clock not found\n"); in rockchip_pcie_parse_dt()
138 dev_err(dev, "aclk_perf clock not found\n"); in rockchip_pcie_parse_dt()
144 dev_err(dev, "hclk clock not found\n"); in rockchip_pcie_parse_dt()
[all …]
|
| /linux-6.12.1/sound/isa/ |
| D | sc6000.c | 224 dev_err(devptr, "DSP Command (0x%x) timeout.\n", cmd); in sc6000_write()
236 dev_err(devptr, "CMD 0x%x: failed!\n", command); in sc6000_dsp_get_answer()
277 dev_err(devptr, "CMD 0x%x: failed!\n", COMMAND_5C); in sc6000_hw_cfg_write()
281 dev_err(devptr, "DATA 0x%x: failed!\n", cfg[0]); in sc6000_hw_cfg_write()
285 dev_err(devptr, "DATA 0x%x: failed!\n", cfg[1]); in sc6000_hw_cfg_write()
289 dev_err(devptr, "CMD 0x%x: failed!\n", COMMAND_C5); in sc6000_hw_cfg_write()
301 dev_err(devptr, "CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); in sc6000_cfg_write()
305 dev_err(devptr, "%s: failed!\n", __func__); in sc6000_cfg_write()
318 dev_err(devptr, "CMD 0x%x: failed!\n", in sc6000_setup_board()
325 dev_err(devptr, "sc6000_read after CMD 0x%x: failed\n", in sc6000_setup_board()
[all …]
|
| /linux-6.12.1/drivers/soundwire/ |
| D | intel_bus_common.c | 28 dev_err(dev, "%s: unable to initialize Cadence IP: %d\n", __func__, ret); in intel_start_bus()
37 dev_err(dev, "%s: sync go failed: %d\n", __func__, ret); in intel_start_bus()
44 dev_err(dev, "%s: CONFIG_UPDATE BIT still set\n", __func__); in intel_start_bus()
50 dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret); in intel_start_bus()
56 dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret); in intel_start_bus()
112 dev_err(dev, "cannot enable interrupts during resume\n"); in intel_start_bus_after_reset()
119 dev_err(dev, "unable to restart clock during resume\n"); in intel_start_bus_after_reset()
131 dev_err(sdw->cdns.dev, "sync go failed during resume\n"); in intel_start_bus_after_reset()
138 dev_err(dev, "%s: CONFIG_UPDATE BIT still set\n", __func__); in intel_start_bus_after_reset()
144 dev_err(dev, "cannot enable interrupts during resume\n"); in intel_start_bus_after_reset()
[all …]
|
| /linux-6.12.1/drivers/edac/ |
| D | xgene_edac.c | 359 dev_err(edac->dev, "no MCU resource address\n"); in xgene_edac_mc_add()
364 dev_err(edac->dev, "unable to map MCU resource\n"); in xgene_edac_mc_add()
371 dev_err(edac->dev, "no memory-controller property\n"); in xgene_edac_mc_add()
414 dev_err(edac->dev, "edac_mc_add_mc failed\n"); in xgene_edac_mc_add()
531 dev_err(edac_dev->dev, in xgene_edac_pmd_l1_check()
538 dev_err(edac_dev->dev, "One or more correctable error\n"); in xgene_edac_pmd_l1_check()
540 dev_err(edac_dev->dev, "Multiple correctable error\n"); in xgene_edac_pmd_l1_check()
543 dev_err(edac_dev->dev, "L1 TLB multiple hit\n"); in xgene_edac_pmd_l1_check()
546 dev_err(edac_dev->dev, "Way select multiple hit\n"); in xgene_edac_pmd_l1_check()
549 dev_err(edac_dev->dev, "Physical tag parity error\n"); in xgene_edac_pmd_l1_check()
[all …]
|
| /linux-6.12.1/drivers/media/platform/st/sti/delta/ |
| D | delta-ipc.c | 122 dev_err(delta->dev, in delta_ipc_open()
130 dev_err(delta->dev, in delta_ipc_open()
137 dev_err(delta->dev, in delta_ipc_open()
144 dev_err(delta->dev, in delta_ipc_open()
151 dev_err(delta->dev, in delta_ipc_open()
187 dev_err(delta->dev, in delta_ipc_open()
197 dev_err(delta->dev, in delta_ipc_open()
207 dev_err(delta->dev, in delta_ipc_open()
238 dev_err(delta->dev, in delta_ipc_set_stream()
245 dev_err(delta->dev, in delta_ipc_set_stream()
[all …]
|
| /linux-6.12.1/sound/soc/intel/boards/ |
| D | sof_realtek_common.c | 150 dev_err(codec_dai->dev, "fail to set pll, ret %d\n", in rt1011_hw_params()
158 dev_err(codec_dai->dev, "fail to set sysclk, ret %d\n", in rt1011_hw_params()
164 dev_err(codec_dai->dev, "invalid codec index %d\n", in rt1011_hw_params()
173 dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n", in rt1011_hw_params()
198 dev_err(rtd->dev, "fail to add rt1011 widgets, ret %d\n", in rt1011_init()
206 dev_err(rtd->dev, "fail to add rt1011 kcontrols, ret %d\n", in rt1011_init()
214 dev_err(rtd->dev, "fail to add rt1011 routes, ret %d\n", in rt1011_init()
231 dev_err(rtd->dev, "fail to add rt1011 widgets, ret %d\n", in rt1011_init()
239 dev_err(rtd->dev, "fail to add rt1011 controls, ret %d\n", in rt1011_init()
247 dev_err(rtd->dev, "fail to add rt1011 routes, ret %d\n", in rt1011_init()
[all …]
|
| D | sof_maxim_common.c | 124 dev_err(codec_dai->dev, "only 2 amps are supported\n"); in max_98373_hw_params()
134 dev_err(rtd->dev, "invalid tdm slots %d\n", in max_98373_hw_params()
145 dev_err(codec_dai->dev, "invalid tx mask 0x%x, used 0x%x\n", in max_98373_hw_params()
157 dev_err(codec_dai->dev, "slot mismatch, tx %d slots %d\n", in max_98373_hw_params()
163 dev_err(codec_dai->dev, "slot mismatch, rx %d slots %d\n", in max_98373_hw_params()
177 dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n", in max_98373_hw_params()
250 dev_err(rtd->dev, "fail to add max98373 widgets, ret %d\n", in max_98373_spk_codec_init()
258 dev_err(rtd->dev, "fail to add max98373 kcontrols, ret %d\n", in max_98373_spk_codec_init()
266 dev_err(rtd->dev, "fail to add max98373 routes, ret %d\n", in max_98373_spk_codec_init()
272 dev_err(rtd->dev, "max98373: invalid num_codecs %d\n", num_codecs); in max_98373_spk_codec_init()
[all …]
|
| /linux-6.12.1/drivers/input/mouse/ |
| D | elan_i2c_i2c.c | 106 dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg); in elan_i2c_read_cmd()
131 dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n", in elan_i2c_write_cmd()
147 dev_err(dev, "device reset failed: %d\n", error); in elan_i2c_initialize()
157 dev_err(dev, "failed to read reset response: %d\n", error); in elan_i2c_initialize()
164 dev_err(dev, "cannot get device descriptor: %d\n", error); in elan_i2c_initialize()
171 dev_err(dev, "fetching report descriptor failed.: %d\n", error); in elan_i2c_initialize()
192 dev_err(&client->dev, in elan_i2c_power_control()
206 dev_err(&client->dev, in elan_i2c_power_control()
256 dev_err(&client->dev, "failed to get pattern: %d\n", error); in elan_i2c_get_pattern()
286 dev_err(&client->dev, "failed to get %s version: %d\n", in elan_i2c_get_version()
[all …]
|
| D | elan_i2c_smbus.c | 64 dev_err(&client->dev, "hello packet length fail: %d\n", len); in elan_smbus_initialize()
71 dev_err(&client->dev, "hello packet fail [%*ph]\n", in elan_smbus_initialize()
79 dev_err(&client->dev, "failed to enable touchpad: %d\n", error); in elan_smbus_initialize()
161 dev_err(&client->dev, "failed to get %s version: %d\n", in elan_smbus_get_version()
179 dev_err(&client->dev, "failed to get SM version: %d\n", error); in elan_smbus_get_sm_version()
197 dev_err(&client->dev, "failed to get product ID: %d\n", error); in elan_smbus_get_product_id()
216 dev_err(&client->dev, "failed to get %s checksum: %d\n", in elan_smbus_get_checksum()
235 dev_err(&client->dev, "failed to get dimensions: %d\n", error); in elan_smbus_get_max()
255 dev_err(&client->dev, "failed to get resolution: %d\n", error); in elan_smbus_get_resolution()
276 dev_err(&client->dev, "failed to get trace info: %d\n", error); in elan_smbus_get_num_traces()
[all …]
|
| /linux-6.12.1/drivers/input/touchscreen/ |
| D | bu21013_ts.c | 245 dev_err(&ts->client->dev, "%s failed\n", __func__); in bu21013_gpio_irq()
269 dev_err(&client->dev, "BU21013_RESET reg write failed\n"); in bu21013_init_chip()
277 dev_err(&client->dev, "BU21013_SENSOR_0_7 reg write failed\n"); in bu21013_init_chip()
284 dev_err(&client->dev, "BU21013_SENSOR_8_15 reg write failed\n"); in bu21013_init_chip()
291 dev_err(&client->dev, "BU21013_SENSOR_16_23 reg write failed\n"); in bu21013_init_chip()
299 dev_err(&client->dev, "BU21013_POS_MODE1 reg write failed\n"); in bu21013_init_chip()
310 dev_err(&client->dev, "BU21013_POS_MODE2 reg write failed\n"); in bu21013_init_chip()
318 dev_err(&client->dev, "BU21013_CLK_MODE reg write failed\n"); in bu21013_init_chip()
326 dev_err(&client->dev, "BU21013_IDLE reg write failed\n"); in bu21013_init_chip()
333 dev_err(&client->dev, "BU21013_INT_MODE reg write failed\n"); in bu21013_init_chip()
[all …]
|
| /linux-6.12.1/sound/soc/codecs/ |
| D | pcm512x.c | 428 dev_err(component->dev, in pcm512x_digital_playback_switch_put()
592 dev_err(dev, "Need SCLK for master mode: %ld\n", in pcm512x_dai_startup_master()
684 dev_err(component->dev, "Failed to remove standby: %d\n", in pcm512x_set_bias_level()
694 dev_err(component->dev, "Failed to request standby: %d\n", in pcm512x_set_bias_level()
728 dev_err(dev, "Impossible to generate a suitable SCK\n"); in pcm512x_find_sck()
831 dev_err(dev, "Need a slower clock as pll-input\n"); in pcm512x_find_pll_coeff()
835 dev_err(dev, "Need a faster clock as pll-input\n"); in pcm512x_find_pll_coeff()
920 dev_err(dev, "No LRCLK?\n"); in pcm512x_set_dividers()
934 dev_err(dev, "Failed to find suitable BCLK: %d\n", ret); in pcm512x_set_dividers()
938 dev_err(dev, "No BCLK?\n"); in pcm512x_set_dividers()
[all …]
|
| /linux-6.12.1/drivers/input/misc/ |
| D | drv2667.c | 140 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
147 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
157 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
165 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
173 dev_err(&haptics->client->dev, in drv2667_set_waveform_freq()
191 dev_err(&haptics->client->dev, in drv2667_worker()
199 dev_err(&haptics->client->dev, in drv2667_worker()
207 dev_err(&haptics->client->dev, in drv2667_worker()
215 dev_err(&haptics->client->dev, in drv2667_worker()
222 dev_err(&haptics->client->dev, in drv2667_worker()
[all …]
|
| D | drv260x.c | 222 dev_err(&haptics->client->dev, in drv260x_worker()
228 dev_err(&haptics->client->dev, in drv260x_worker()
262 dev_err(&haptics->client->dev, in drv260x_close()
315 dev_err(&haptics->client->dev, in drv260x_init()
324 dev_err(&haptics->client->dev, in drv260x_init()
336 dev_err(&haptics->client->dev, in drv260x_init()
349 dev_err(&haptics->client->dev, in drv260x_init()
359 dev_err(&haptics->client->dev, in drv260x_init()
372 dev_err(&haptics->client->dev, in drv260x_init()
382 dev_err(&haptics->client->dev, in drv260x_init()
[all …]
|
| /linux-6.12.1/sound/soc/codecs/aw88395/ |
| D | aw88395_device.c | 24 dev_err(aw_dev->dev, "%s write addr error, ret=%d", __func__, ret); in aw_dev_dsp_write_16bit()
30 dev_err(aw_dev->dev, "%s write data error, ret=%d", __func__, ret); in aw_dev_dsp_write_16bit()
45 dev_err(aw_dev->dev, "%s write addr error, ret=%d", __func__, ret); in aw_dev_dsp_write_32bit()
52 dev_err(aw_dev->dev, "%s write datal error, ret=%d", __func__, ret); in aw_dev_dsp_write_32bit()
59 dev_err(aw_dev->dev, "%s write datah error, ret=%d", __func__, ret); in aw_dev_dsp_write_32bit()
77 dev_err(aw_dev->dev, "write dsp_addr[0x%x] 16-bit dsp_data[0x%x] failed", in aw_dev_dsp_write()
83 dev_err(aw_dev->dev, "write dsp_addr[0x%x] 32-bit dsp_data[0x%x] failed", in aw_dev_dsp_write()
87 dev_err(aw_dev->dev, "data type[%d] unsupported", data_type); in aw_dev_dsp_write()
94 dev_err(aw_dev->dev, "%s fail to clear chip state. Err=%d\n", __func__, ret); in aw_dev_dsp_write()
108 dev_err(aw_dev->dev, "%s write error, ret=%d", __func__, ret); in aw_dev_dsp_read_16bit()
[all …]
|
| /linux-6.12.1/drivers/crypto/intel/qat/qat_common/ |
| D | adf_init.c | 71 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
78 dev_err(&GET_DEV(accel_dev), "Device not configured\n"); in adf_dev_init()
83 dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n"); in adf_dev_init()
88 dev_err(&GET_DEV(accel_dev), "Failed to initialize device\n"); in adf_dev_init()
93 dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n"); in adf_dev_init()
98 dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n"); in adf_dev_init()
106 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
113 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
120 dev_err(&GET_DEV(accel_dev), "Failed to allocate interrupts\n"); in adf_dev_init()
157 dev_err(&GET_DEV(accel_dev), in adf_dev_init()
[all …]
|
| /linux-6.12.1/drivers/gpu/drm/mcde/ |
| D | mcde_drv.c | 148 dev_err(drm->dev, in mcde_modeset_init()
156 dev_err(drm->dev, in mcde_modeset_init()
177 dev_err(drm->dev, "failed to init vblank\n"); in mcde_modeset_init()
183 dev_err(drm->dev, "failed to init display\n"); in mcde_modeset_init()
191 dev_err(drm->dev, "failed to attach display output bridge\n"); in mcde_modeset_init()
228 dev_err(dev, "can't bind component devices\n"); in mcde_drm_bind()
289 dev_err(dev, "can't get EPOD regulator\n"); in mcde_probe()
294 dev_err(dev, "can't enable EPOD regulator\n"); in mcde_probe()
300 dev_err(dev, "can't get VANA regulator\n"); in mcde_probe()
305 dev_err(dev, "can't enable VANA regulator\n"); in mcde_probe()
[all …]
|
| /linux-6.12.1/drivers/gpu/drm/panel/ |
| D | panel-jdi-lpm102a188a.c | 88 dev_err(panel->dev, "failed to set display off: %d\n", ret); in jdi_panel_unprepare()
92 dev_err(panel->dev, "failed to set display off: %d\n", ret); in jdi_panel_unprepare()
99 dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); in jdi_panel_unprepare()
102 dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); in jdi_panel_unprepare()
137 dev_err(&left->dev, "failed to set column address: %d\n", err); in jdi_setup_symmetrical_split()
143 dev_err(&right->dev, "failed to set column address: %d\n", err); in jdi_setup_symmetrical_split()
149 dev_err(&left->dev, "failed to set page address: %d\n", err); in jdi_setup_symmetrical_split()
155 dev_err(&right->dev, "failed to set page address: %d\n", err); in jdi_setup_symmetrical_split()
205 dev_err(panel->dev, "failed to enable supply: %d\n", err); in jdi_panel_prepare()
213 dev_err(panel->dev, "failed to enable ddi_supply: %d\n", err); in jdi_panel_prepare()
[all …]
|
| D | panel-novatek-nt35560.c | 165 dev_err(nt->dev, "failed to disable display backlight (%d)\n", ret); in nt35560_set_brightness()
182 dev_err(nt->dev, "failed to set display PWM ratio (%d)\n", ret); in nt35560_set_brightness()
198 dev_err(nt->dev, "failed to unlock CMD 2 (%d)\n", ret); in nt35560_set_brightness()
204 dev_err(nt->dev, "failed to enter page 1 (%d)\n", ret); in nt35560_set_brightness()
210 dev_err(nt->dev, "failed to disable MTP reload (%d)\n", ret); in nt35560_set_brightness()
215 dev_err(nt->dev, "failed to set PWM divisor (%d)\n", ret); in nt35560_set_brightness()
221 dev_err(nt->dev, "failed to lock CMD 2 (%d)\n", ret); in nt35560_set_brightness()
230 dev_err(nt->dev, "failed to enable display backlight (%d)\n", ret); in nt35560_set_brightness()
256 dev_err(nt->dev, "could not vendor ID byte\n"); in nt35560_read_id()
261 dev_err(nt->dev, "could not read device version byte\n"); in nt35560_read_id()
[all …]
|
| /linux-6.12.1/drivers/cpufreq/ |
| D | sti-cpufreq.c | 65 dev_err(dev, "No major number offset provided in %pOF [%d]\n", in sti_cpufreq_fetch_major()
72 dev_err(dev, "Failed to read major number from syscon [%d]\n", in sti_cpufreq_fetch_major()
91 dev_err(dev, in sti_cpufreq_fetch_minor()
99 dev_err(dev, in sti_cpufreq_fetch_minor()
122 dev_err(dev, "Failed to allocate reg field\n"); in sti_cpufreq_fetch_regmap_field()
128 dev_err(dev, "Failed to read %s code\n", in sti_cpufreq_fetch_regmap_field()
169 dev_err(dev, "This SoC doesn't support voltage scaling\n"); in sti_cpufreq_set_opp_info()
203 dev_err(dev, "Failed to obtain major version\n"); in sti_cpufreq_set_opp_info()
210 dev_err(dev, "Failed to obtain minor version\n"); in sti_cpufreq_set_opp_info()
223 dev_err(dev, "Failed to set OPP config\n"); in sti_cpufreq_set_opp_info()
[all …]
|
| /linux-6.12.1/drivers/remoteproc/ |
| D | remoteproc_elf_loader.c | 53 dev_err(dev, "failed to load %s\n", name);
58 dev_err(dev, "Image is too small\n");
65 dev_err(dev, "Image is corrupted (bad magic)\n");
71 dev_err(dev, "Unsupported class: %d\n", class);
76 dev_err(dev, "elf64 header is too small\n");
86 dev_err(dev, "Unsupported firmware endianness\n");
96 dev_err(dev, "Image is too small\n");
101 dev_err(dev, "No loadable segments\n");
106 dev_err(dev, "Firmware size is too small\n");
191 dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
[all …]
|
| /linux-6.12.1/sound/soc/mediatek/mt8186/ |
| D | mt8186-afe-clk.c | 82 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in mt8186_set_audio_int_bus_parent()
99 dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n", in apll1_mux_setting()
106 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in apll1_mux_setting()
115 dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n", in apll1_mux_setting()
122 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in apll1_mux_setting()
131 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in apll1_mux_setting()
141 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in apll1_mux_setting()
160 dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n", in apll2_mux_setting()
167 dev_err(afe->dev, "%s clk_set_parent %s-%s fail %d\n", in apll2_mux_setting()
176 dev_err(afe->dev, "%s clk_prepare_enable %s fail %d\n", in apll2_mux_setting()
[all …]
|
| /linux-6.12.1/drivers/thermal/qcom/ |
| D | lmh.c | 124 dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n"); in lmh_probe()
130 dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n"); in lmh_probe()
136 dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n"); in lmh_probe()
150 dev_err(dev, "Wrong CPU id associated with LMh node\n"); in lmh_probe()
163 dev_err(dev, "Error %d enabling current subfunction\n", ret); in lmh_probe()
168 dev_err(dev, "Error %d enabling reliability subfunction\n", ret); in lmh_probe()
173 dev_err(dev, "Error %d enabling BCL subfunction\n", ret); in lmh_probe()
178 dev_err(dev, "Error %d enabling thermal subfunction\n", ret); in lmh_probe()
184 dev_err(dev, "Error %d changing profile\n", ret); in lmh_probe()
193 dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); in lmh_probe()
[all …]
|
| /linux-6.12.1/drivers/net/wireless/microchip/wilc1000/ |
| D | spi.c | 178 dev_err(&spi->dev, "missing reset gpio.\n"); in wilc_parse_gpios()
339 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_tx()
343 dev_err(&spi->dev, in wilc_spi_tx()
381 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_rx()
384 dev_err(&spi->dev, in wilc_spi_rx()
417 dev_err(&spi->dev, "SPI transaction failed\n"); in wilc_spi_tx_rx()
419 dev_err(&spi->dev, in wilc_spi_tx_rx()
460 dev_err(&spi->dev, in spi_data_write()
470 dev_err(&spi->dev, in spi_data_write()
484 dev_err(&spi->dev, "Failed data block crc write, bus error...\n"); in spi_data_write()
[all …]
|