1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Driver for AT91 USART Controllers as SPI
4 //
5 // Copyright (C) 2018 Microchip Technology Inc.
6 //
7 // Author: Radu Pirea <radu.pirea@microchip.com>
8 
9 #include <linux/clk.h>
10 #include <linux/delay.h>
11 #include <linux/dmaengine.h>
12 #include <linux/dma-direction.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/gpio/consumer.h>
17 #include <linux/pinctrl/consumer.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 
21 #include <linux/spi/spi.h>
22 
23 #define US_CR			0x00
24 #define US_MR			0x04
25 #define US_IER			0x08
26 #define US_IDR			0x0C
27 #define US_CSR			0x14
28 #define US_RHR			0x18
29 #define US_THR			0x1C
30 #define US_BRGR			0x20
31 #define US_VERSION		0xFC
32 
33 #define US_CR_RSTRX		BIT(2)
34 #define US_CR_RSTTX		BIT(3)
35 #define US_CR_RXEN		BIT(4)
36 #define US_CR_RXDIS		BIT(5)
37 #define US_CR_TXEN		BIT(6)
38 #define US_CR_TXDIS		BIT(7)
39 
40 #define US_MR_SPI_HOST		0x0E
41 #define US_MR_CHRL		GENMASK(7, 6)
42 #define US_MR_CPHA		BIT(8)
43 #define US_MR_CPOL		BIT(16)
44 #define US_MR_CLKO		BIT(18)
45 #define US_MR_WRDBT		BIT(20)
46 #define US_MR_LOOP		BIT(15)
47 
48 #define US_IR_RXRDY		BIT(0)
49 #define US_IR_TXRDY		BIT(1)
50 #define US_IR_OVRE		BIT(5)
51 
52 #define US_BRGR_SIZE		BIT(16)
53 
54 #define US_MIN_CLK_DIV		0x06
55 #define US_MAX_CLK_DIV		BIT(16)
56 
57 #define US_RESET		(US_CR_RSTRX | US_CR_RSTTX)
58 #define US_DISABLE		(US_CR_RXDIS | US_CR_TXDIS)
59 #define US_ENABLE		(US_CR_RXEN | US_CR_TXEN)
60 #define US_OVRE_RXRDY_IRQS	(US_IR_OVRE | US_IR_RXRDY)
61 
62 #define US_INIT \
63 	(US_MR_SPI_HOST | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
64 #define US_DMA_MIN_BYTES       16
65 #define US_DMA_TIMEOUT         (msecs_to_jiffies(1000))
66 
67 /* Register access macros */
68 #define at91_usart_spi_readl(port, reg) \
69 	readl_relaxed((port)->regs + US_##reg)
70 #define at91_usart_spi_writel(port, reg, value) \
71 	writel_relaxed((value), (port)->regs + US_##reg)
72 
73 #define at91_usart_spi_readb(port, reg) \
74 	readb_relaxed((port)->regs + US_##reg)
75 #define at91_usart_spi_writeb(port, reg, value) \
76 	writeb_relaxed((value), (port)->regs + US_##reg)
77 
78 struct at91_usart_spi {
79 	struct platform_device  *mpdev;
80 	struct spi_transfer	*current_transfer;
81 	void __iomem		*regs;
82 	struct device		*dev;
83 	struct clk		*clk;
84 
85 	struct completion	xfer_completion;
86 
87 	/*used in interrupt to protect data reading*/
88 	spinlock_t		lock;
89 
90 	phys_addr_t		phybase;
91 
92 	int			irq;
93 	unsigned int		current_tx_remaining_bytes;
94 	unsigned int		current_rx_remaining_bytes;
95 
96 	u32			spi_clk;
97 	u32			status;
98 
99 	bool			xfer_failed;
100 	bool			use_dma;
101 };
102 
dma_callback(void * data)103 static void dma_callback(void *data)
104 {
105 	struct spi_controller   *ctlr = data;
106 	struct at91_usart_spi   *aus = spi_controller_get_devdata(ctlr);
107 
108 	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
109 	aus->current_rx_remaining_bytes = 0;
110 	complete(&aus->xfer_completion);
111 }
112 
at91_usart_spi_can_dma(struct spi_controller * ctrl,struct spi_device * spi,struct spi_transfer * xfer)113 static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
114 				   struct spi_device *spi,
115 				   struct spi_transfer *xfer)
116 {
117 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
118 
119 	return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
120 }
121 
at91_usart_spi_configure_dma(struct spi_controller * ctlr,struct at91_usart_spi * aus)122 static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
123 					struct at91_usart_spi *aus)
124 {
125 	struct dma_slave_config slave_config;
126 	struct device *dev = &aus->mpdev->dev;
127 	phys_addr_t phybase = aus->phybase;
128 	dma_cap_mask_t mask;
129 	int err = 0;
130 
131 	dma_cap_zero(mask);
132 	dma_cap_set(DMA_SLAVE, mask);
133 
134 	ctlr->dma_tx = dma_request_chan(dev, "tx");
135 	if (IS_ERR(ctlr->dma_tx)) {
136 		err = PTR_ERR(ctlr->dma_tx);
137 		goto at91_usart_spi_error_clear;
138 	}
139 
140 	ctlr->dma_rx = dma_request_chan(dev, "rx");
141 	if (IS_ERR(ctlr->dma_rx)) {
142 		err = PTR_ERR(ctlr->dma_rx);
143 		goto at91_usart_spi_error;
144 	}
145 
146 	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
147 	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
148 	slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
149 	slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
150 	slave_config.src_maxburst = 1;
151 	slave_config.dst_maxburst = 1;
152 	slave_config.device_fc = false;
153 
154 	slave_config.direction = DMA_DEV_TO_MEM;
155 	if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
156 		dev_err(&ctlr->dev,
157 			"failed to configure rx dma channel\n");
158 		err = -EINVAL;
159 		goto at91_usart_spi_error;
160 	}
161 
162 	slave_config.direction = DMA_MEM_TO_DEV;
163 	if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
164 		dev_err(&ctlr->dev,
165 			"failed to configure tx dma channel\n");
166 		err = -EINVAL;
167 		goto at91_usart_spi_error;
168 	}
169 
170 	aus->use_dma = true;
171 	return 0;
172 
173 at91_usart_spi_error:
174 	if (!IS_ERR_OR_NULL(ctlr->dma_tx))
175 		dma_release_channel(ctlr->dma_tx);
176 	if (!IS_ERR_OR_NULL(ctlr->dma_rx))
177 		dma_release_channel(ctlr->dma_rx);
178 	ctlr->dma_tx = NULL;
179 	ctlr->dma_rx = NULL;
180 
181 at91_usart_spi_error_clear:
182 	return err;
183 }
184 
at91_usart_spi_release_dma(struct spi_controller * ctlr)185 static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
186 {
187 	if (ctlr->dma_rx)
188 		dma_release_channel(ctlr->dma_rx);
189 	if (ctlr->dma_tx)
190 		dma_release_channel(ctlr->dma_tx);
191 }
192 
at91_usart_spi_stop_dma(struct spi_controller * ctlr)193 static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
194 {
195 	if (ctlr->dma_rx)
196 		dmaengine_terminate_all(ctlr->dma_rx);
197 	if (ctlr->dma_tx)
198 		dmaengine_terminate_all(ctlr->dma_tx);
199 }
200 
at91_usart_spi_dma_transfer(struct spi_controller * ctlr,struct spi_transfer * xfer)201 static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
202 				       struct spi_transfer *xfer)
203 {
204 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
205 	struct dma_chan	 *rxchan = ctlr->dma_rx;
206 	struct dma_chan *txchan = ctlr->dma_tx;
207 	struct dma_async_tx_descriptor *rxdesc;
208 	struct dma_async_tx_descriptor *txdesc;
209 	dma_cookie_t cookie;
210 
211 	/* Disable RX interrupt */
212 	at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
213 
214 	rxdesc = dmaengine_prep_slave_sg(rxchan,
215 					 xfer->rx_sg.sgl,
216 					 xfer->rx_sg.nents,
217 					 DMA_DEV_TO_MEM,
218 					 DMA_PREP_INTERRUPT |
219 					 DMA_CTRL_ACK);
220 	if (!rxdesc)
221 		goto at91_usart_spi_err_dma;
222 
223 	txdesc = dmaengine_prep_slave_sg(txchan,
224 					 xfer->tx_sg.sgl,
225 					 xfer->tx_sg.nents,
226 					 DMA_MEM_TO_DEV,
227 					 DMA_PREP_INTERRUPT |
228 					 DMA_CTRL_ACK);
229 	if (!txdesc)
230 		goto at91_usart_spi_err_dma;
231 
232 	rxdesc->callback = dma_callback;
233 	rxdesc->callback_param = ctlr;
234 
235 	cookie = rxdesc->tx_submit(rxdesc);
236 	if (dma_submit_error(cookie))
237 		goto at91_usart_spi_err_dma;
238 
239 	cookie = txdesc->tx_submit(txdesc);
240 	if (dma_submit_error(cookie))
241 		goto at91_usart_spi_err_dma;
242 
243 	rxchan->device->device_issue_pending(rxchan);
244 	txchan->device->device_issue_pending(txchan);
245 
246 	return 0;
247 
248 at91_usart_spi_err_dma:
249 	/* Enable RX interrupt if something fails and fallback to PIO */
250 	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
251 	at91_usart_spi_stop_dma(ctlr);
252 
253 	return -ENOMEM;
254 }
255 
at91_usart_spi_dma_timeout(struct at91_usart_spi * aus)256 static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
257 {
258 	return wait_for_completion_timeout(&aus->xfer_completion,
259 					   US_DMA_TIMEOUT);
260 }
261 
at91_usart_spi_tx_ready(struct at91_usart_spi * aus)262 static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
263 {
264 	return aus->status & US_IR_TXRDY;
265 }
266 
at91_usart_spi_rx_ready(struct at91_usart_spi * aus)267 static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
268 {
269 	return aus->status & US_IR_RXRDY;
270 }
271 
at91_usart_spi_check_overrun(struct at91_usart_spi * aus)272 static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
273 {
274 	return aus->status & US_IR_OVRE;
275 }
276 
at91_usart_spi_read_status(struct at91_usart_spi * aus)277 static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
278 {
279 	aus->status = at91_usart_spi_readl(aus, CSR);
280 	return aus->status;
281 }
282 
at91_usart_spi_tx(struct at91_usart_spi * aus)283 static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
284 {
285 	unsigned int len = aus->current_transfer->len;
286 	unsigned int remaining = aus->current_tx_remaining_bytes;
287 	const u8  *tx_buf = aus->current_transfer->tx_buf;
288 
289 	if (!remaining)
290 		return;
291 
292 	if (at91_usart_spi_tx_ready(aus)) {
293 		at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
294 		aus->current_tx_remaining_bytes--;
295 	}
296 }
297 
at91_usart_spi_rx(struct at91_usart_spi * aus)298 static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
299 {
300 	int len = aus->current_transfer->len;
301 	int remaining = aus->current_rx_remaining_bytes;
302 	u8  *rx_buf = aus->current_transfer->rx_buf;
303 
304 	if (!remaining)
305 		return;
306 
307 	rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
308 	aus->current_rx_remaining_bytes--;
309 }
310 
311 static inline void
at91_usart_spi_set_xfer_speed(struct at91_usart_spi * aus,struct spi_transfer * xfer)312 at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
313 			      struct spi_transfer *xfer)
314 {
315 	at91_usart_spi_writel(aus, BRGR,
316 			      DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
317 }
318 
at91_usart_spi_interrupt(int irq,void * dev_id)319 static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
320 {
321 	struct spi_controller *controller = dev_id;
322 	struct at91_usart_spi *aus = spi_controller_get_devdata(controller);
323 
324 	spin_lock(&aus->lock);
325 	at91_usart_spi_read_status(aus);
326 
327 	if (at91_usart_spi_check_overrun(aus)) {
328 		aus->xfer_failed = true;
329 		at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
330 		spin_unlock(&aus->lock);
331 		return IRQ_HANDLED;
332 	}
333 
334 	if (at91_usart_spi_rx_ready(aus)) {
335 		at91_usart_spi_rx(aus);
336 		spin_unlock(&aus->lock);
337 		return IRQ_HANDLED;
338 	}
339 
340 	spin_unlock(&aus->lock);
341 
342 	return IRQ_NONE;
343 }
344 
at91_usart_spi_setup(struct spi_device * spi)345 static int at91_usart_spi_setup(struct spi_device *spi)
346 {
347 	struct at91_usart_spi *aus = spi_controller_get_devdata(spi->controller);
348 	u32 *ausd = spi->controller_state;
349 	unsigned int mr = at91_usart_spi_readl(aus, MR);
350 
351 	if (spi->mode & SPI_CPOL)
352 		mr |= US_MR_CPOL;
353 	else
354 		mr &= ~US_MR_CPOL;
355 
356 	if (spi->mode & SPI_CPHA)
357 		mr |= US_MR_CPHA;
358 	else
359 		mr &= ~US_MR_CPHA;
360 
361 	if (spi->mode & SPI_LOOP)
362 		mr |= US_MR_LOOP;
363 	else
364 		mr &= ~US_MR_LOOP;
365 
366 	if (!ausd) {
367 		ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
368 		if (!ausd)
369 			return -ENOMEM;
370 
371 		spi->controller_state = ausd;
372 	}
373 
374 	*ausd = mr;
375 
376 	dev_dbg(&spi->dev,
377 		"setup: bpw %u mode 0x%x -> mr %d %08x\n",
378 		spi->bits_per_word, spi->mode, spi_get_chipselect(spi, 0), mr);
379 
380 	return 0;
381 }
382 
at91_usart_spi_transfer_one(struct spi_controller * ctlr,struct spi_device * spi,struct spi_transfer * xfer)383 static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
384 				       struct spi_device *spi,
385 				       struct spi_transfer *xfer)
386 {
387 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
388 	unsigned long dma_timeout = 0;
389 	int ret = 0;
390 
391 	at91_usart_spi_set_xfer_speed(aus, xfer);
392 	aus->xfer_failed = false;
393 	aus->current_transfer = xfer;
394 	aus->current_tx_remaining_bytes = xfer->len;
395 	aus->current_rx_remaining_bytes = xfer->len;
396 
397 	while ((aus->current_tx_remaining_bytes ||
398 		aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
399 		reinit_completion(&aus->xfer_completion);
400 		if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
401 		    !ret) {
402 			ret = at91_usart_spi_dma_transfer(ctlr, xfer);
403 			if (ret)
404 				continue;
405 
406 			dma_timeout = at91_usart_spi_dma_timeout(aus);
407 
408 			if (WARN_ON(dma_timeout == 0)) {
409 				dev_err(&spi->dev, "DMA transfer timeout\n");
410 				return -EIO;
411 			}
412 			aus->current_tx_remaining_bytes = 0;
413 		} else {
414 			at91_usart_spi_read_status(aus);
415 			at91_usart_spi_tx(aus);
416 		}
417 
418 		cpu_relax();
419 	}
420 
421 	if (aus->xfer_failed) {
422 		dev_err(aus->dev, "Overrun!\n");
423 		return -EIO;
424 	}
425 
426 	return 0;
427 }
428 
at91_usart_spi_prepare_message(struct spi_controller * ctlr,struct spi_message * message)429 static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
430 					  struct spi_message *message)
431 {
432 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
433 	struct spi_device *spi = message->spi;
434 	u32 *ausd = spi->controller_state;
435 
436 	at91_usart_spi_writel(aus, CR, US_ENABLE);
437 	at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
438 	at91_usart_spi_writel(aus, MR, *ausd);
439 
440 	return 0;
441 }
442 
at91_usart_spi_unprepare_message(struct spi_controller * ctlr,struct spi_message * message)443 static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
444 					    struct spi_message *message)
445 {
446 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
447 
448 	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
449 	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
450 
451 	return 0;
452 }
453 
at91_usart_spi_cleanup(struct spi_device * spi)454 static void at91_usart_spi_cleanup(struct spi_device *spi)
455 {
456 	struct at91_usart_spi_device *ausd = spi->controller_state;
457 
458 	spi->controller_state = NULL;
459 	kfree(ausd);
460 }
461 
at91_usart_spi_init(struct at91_usart_spi * aus)462 static void at91_usart_spi_init(struct at91_usart_spi *aus)
463 {
464 	at91_usart_spi_writel(aus, MR, US_INIT);
465 	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
466 }
467 
at91_usart_gpio_setup(struct platform_device * pdev)468 static int at91_usart_gpio_setup(struct platform_device *pdev)
469 {
470 	struct gpio_descs *cs_gpios;
471 
472 	cs_gpios = devm_gpiod_get_array_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
473 
474 	return PTR_ERR_OR_ZERO(cs_gpios);
475 }
476 
at91_usart_spi_probe(struct platform_device * pdev)477 static int at91_usart_spi_probe(struct platform_device *pdev)
478 {
479 	struct resource *regs;
480 	struct spi_controller *controller;
481 	struct at91_usart_spi *aus;
482 	struct clk *clk;
483 	int irq;
484 	int ret;
485 
486 	regs = platform_get_resource(to_platform_device(pdev->dev.parent),
487 				     IORESOURCE_MEM, 0);
488 	if (!regs)
489 		return -EINVAL;
490 
491 	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
492 	if (irq < 0)
493 		return irq;
494 
495 	clk = devm_clk_get(pdev->dev.parent, "usart");
496 	if (IS_ERR(clk))
497 		return PTR_ERR(clk);
498 
499 	ret = -ENOMEM;
500 	controller = spi_alloc_host(&pdev->dev, sizeof(*aus));
501 	if (!controller)
502 		goto at91_usart_spi_probe_fail;
503 
504 	ret = at91_usart_gpio_setup(pdev);
505 	if (ret)
506 		goto at91_usart_spi_probe_fail;
507 
508 	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
509 	controller->dev.of_node = pdev->dev.parent->of_node;
510 	controller->bits_per_word_mask = SPI_BPW_MASK(8);
511 	controller->setup = at91_usart_spi_setup;
512 	controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
513 	controller->transfer_one = at91_usart_spi_transfer_one;
514 	controller->prepare_message = at91_usart_spi_prepare_message;
515 	controller->unprepare_message = at91_usart_spi_unprepare_message;
516 	controller->can_dma = at91_usart_spi_can_dma;
517 	controller->cleanup = at91_usart_spi_cleanup;
518 	controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
519 						US_MIN_CLK_DIV);
520 	controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
521 						US_MAX_CLK_DIV);
522 	platform_set_drvdata(pdev, controller);
523 
524 	aus = spi_controller_get_devdata(controller);
525 
526 	aus->dev = &pdev->dev;
527 	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
528 	if (IS_ERR(aus->regs)) {
529 		ret = PTR_ERR(aus->regs);
530 		goto at91_usart_spi_probe_fail;
531 	}
532 
533 	aus->irq = irq;
534 	aus->clk = clk;
535 
536 	ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
537 			       dev_name(&pdev->dev), controller);
538 	if (ret)
539 		goto at91_usart_spi_probe_fail;
540 
541 	ret = clk_prepare_enable(clk);
542 	if (ret)
543 		goto at91_usart_spi_probe_fail;
544 
545 	aus->spi_clk = clk_get_rate(clk);
546 	at91_usart_spi_init(aus);
547 
548 	aus->phybase = regs->start;
549 
550 	aus->mpdev = to_platform_device(pdev->dev.parent);
551 
552 	ret = at91_usart_spi_configure_dma(controller, aus);
553 	if (ret)
554 		goto at91_usart_fail_dma;
555 
556 	spin_lock_init(&aus->lock);
557 	init_completion(&aus->xfer_completion);
558 
559 	ret = devm_spi_register_controller(&pdev->dev, controller);
560 	if (ret)
561 		goto at91_usart_fail_register_controller;
562 
563 	dev_info(&pdev->dev,
564 		 "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
565 		 at91_usart_spi_readl(aus, VERSION),
566 		 &regs->start, irq);
567 
568 	return 0;
569 
570 at91_usart_fail_register_controller:
571 	at91_usart_spi_release_dma(controller);
572 at91_usart_fail_dma:
573 	clk_disable_unprepare(clk);
574 at91_usart_spi_probe_fail:
575 	spi_controller_put(controller);
576 	return ret;
577 }
578 
at91_usart_spi_runtime_suspend(struct device * dev)579 __maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
580 {
581 	struct spi_controller *ctlr = dev_get_drvdata(dev);
582 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
583 
584 	clk_disable_unprepare(aus->clk);
585 	pinctrl_pm_select_sleep_state(dev);
586 
587 	return 0;
588 }
589 
at91_usart_spi_runtime_resume(struct device * dev)590 __maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
591 {
592 	struct spi_controller *ctrl = dev_get_drvdata(dev);
593 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
594 
595 	pinctrl_pm_select_default_state(dev);
596 
597 	return clk_prepare_enable(aus->clk);
598 }
599 
at91_usart_spi_suspend(struct device * dev)600 __maybe_unused static int at91_usart_spi_suspend(struct device *dev)
601 {
602 	struct spi_controller *ctrl = dev_get_drvdata(dev);
603 	int ret;
604 
605 	ret = spi_controller_suspend(ctrl);
606 	if (ret)
607 		return ret;
608 
609 	if (!pm_runtime_suspended(dev))
610 		at91_usart_spi_runtime_suspend(dev);
611 
612 	return 0;
613 }
614 
at91_usart_spi_resume(struct device * dev)615 __maybe_unused static int at91_usart_spi_resume(struct device *dev)
616 {
617 	struct spi_controller *ctrl = dev_get_drvdata(dev);
618 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctrl);
619 	int ret;
620 
621 	if (!pm_runtime_suspended(dev)) {
622 		ret = at91_usart_spi_runtime_resume(dev);
623 		if (ret)
624 			return ret;
625 	}
626 
627 	at91_usart_spi_init(aus);
628 
629 	return spi_controller_resume(ctrl);
630 }
631 
at91_usart_spi_remove(struct platform_device * pdev)632 static void at91_usart_spi_remove(struct platform_device *pdev)
633 {
634 	struct spi_controller *ctlr = platform_get_drvdata(pdev);
635 	struct at91_usart_spi *aus = spi_controller_get_devdata(ctlr);
636 
637 	at91_usart_spi_release_dma(ctlr);
638 	clk_disable_unprepare(aus->clk);
639 }
640 
641 static const struct dev_pm_ops at91_usart_spi_pm_ops = {
642 	SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
643 	SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
644 			   at91_usart_spi_runtime_resume, NULL)
645 };
646 
647 static struct platform_driver at91_usart_spi_driver = {
648 	.driver = {
649 		.name = "at91_usart_spi",
650 		.pm = &at91_usart_spi_pm_ops,
651 	},
652 	.probe = at91_usart_spi_probe,
653 	.remove_new = at91_usart_spi_remove,
654 };
655 
656 module_platform_driver(at91_usart_spi_driver);
657 
658 MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
659 MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
660 MODULE_LICENSE("GPL v2");
661 MODULE_ALIAS("platform:at91_usart_spi");
662