| /linux-6.12.1/drivers/pinctrl/ |
| D | pinctrl-xway.c | 125 MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG),
155 static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
165 static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */
168 static const unsigned ase_pins_spi_clk[] = {GPIO10};
253 MFP_XWAY(GPIO10, GPIO, ASC, SPI, MII),
285 static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
310 static const unsigned danube_pins_spi_cs4[] = {GPIO10};
428 MFP_XWAY(GPIO10, GPIO, ASC, SPI, EXIN),
476 static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
482 static const unsigned xrx100_pins_exin4[] = {GPIO10};
[all …]
|
| D | pinctrl-lantiq.h | 117 GPIO10, /* 10 */ enumerator
|
| D | pinctrl-falcon.c | 117 MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE),
169 static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
|
| /linux-6.12.1/drivers/media/usb/dvb-usb/ |
| D | dib0700_devices.c | 91 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); in bristol_frontend_attach()
92 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); in bristol_frontend_attach()
286 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); in stk7700P2_frontend_attach()
288 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); in stk7700P2_frontend_attach()
319 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); in stk7700d_frontend_attach()
321 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); in stk7700d_frontend_attach()
471 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); in stk7700ph_frontend_attach()
473 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); in stk7700ph_frontend_attach()
711 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); in stk7700p_frontend_attach()
717 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); in stk7700p_frontend_attach()
[all …]
|
| D | dib07x0.h | 16 GPIO10 = 15, enumerator
|
| /linux-6.12.1/arch/arm/mach-pxa/ |
| D | pxa320.c | 28 MFP_ADDR(GPIO10, 0x0458),
|
| D | mfp-pxa27x.h | 60 #define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
69 #define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
132 #define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
338 #define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
|
| D | mfp-pxa2xx.h | 64 #define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
|
| D | mfp-pxa3xx.h | 22 #define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
|
| D | mfp-pxa25x.h | 19 #define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
|
| D | mfp-pxa300.h | 116 #define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
222 #define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
|
| /linux-6.12.1/arch/arm/boot/dts/broadcom/ |
| D | bcm2837-rpi-cm3-io3.dts | 29 "GPIO10",
|
| D | bcm2835-rpi-cm1-io1.dts | 29 "GPIO10",
|
| /linux-6.12.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-msc-sm2s-ep1.dts | 143 <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19>, /* GPIO10 */
|
| D | fsl-ls1028a-kontron-sl28.dts | 261 "GPIO8", "GPIO9", "GPIO10", "GPIO11",
|
| /linux-6.12.1/arch/arm/boot/dts/nuvoton/ |
| D | nuvoton-npcm750-pincfg-evb.dtsi | 17 pins = "GPIO10/IOXHLD";
|
| D | nuvoton-npcm730-gsj-gpio.dtsi | 57 pins = "GPIO10/IOXHLD";
|
| D | nuvoton-npcm750-runbmc-olympus-pincfg.dtsi | 52 pins = "GPIO10/IOXHLD";
|
| /linux-6.12.1/arch/arm64/boot/dts/rockchip/ |
| D | rk3566-soquartz-cm4.dts | 157 * pin 44 - GPIO10 - spi3_mosi_m0
|
| D | rk3566-soquartz-blade.dts | 159 * pin 44 - GPIO10 - spi3_mosi_m0
|
| D | rk3566-soquartz-model-a.dts | 189 * pin 44 - GPIO10 - spi3_mosi_m0
|
| /linux-6.12.1/arch/arm/boot/dts/marvell/ |
| D | dove-sbc-a510.dts | 170 * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
|
| /linux-6.12.1/arch/arm/boot/dts/ti/keystone/ |
| D | keystone-k2l.dtsi | 185 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
|
| /linux-6.12.1/Documentation/devicetree/bindings/pinctrl/ |
| D | nuvoton,npcm7xx-pinctrl.txt | 46 "GPIO7/IOX2D0/SMB2DSCL", "GPIO8/LKGPO1", "GPIO9/LKGPO2", "GPIO10/IOXHLD",
|
| /linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
| D | imx6qdl-kontron-samx6i.dtsi | 506 MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */
|