1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * ov772x Camera Driver
4 *
5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
6 *
7 * Copyright (C) 2008 Renesas Solutions Corp.
8 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
9 *
10 * Based on ov7670 and soc_camera_platform driver,
11 *
12 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
13 * Copyright (C) 2008 Magnus Damm
14 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
15 */
16
17 #include <linux/clk.h>
18 #include <linux/delay.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/i2c.h>
21 #include <linux/init.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/regmap.h>
25 #include <linux/slab.h>
26 #include <linux/v4l2-mediabus.h>
27 #include <linux/videodev2.h>
28
29 #include <media/i2c/ov772x.h>
30
31 #include <media/v4l2-ctrls.h>
32 #include <media/v4l2-device.h>
33 #include <media/v4l2-event.h>
34 #include <media/v4l2-fwnode.h>
35 #include <media/v4l2-image-sizes.h>
36 #include <media/v4l2-subdev.h>
37
38 /*
39 * register offset
40 */
41 #define GAIN 0x00 /* AGC - Gain control gain setting */
42 #define BLUE 0x01 /* AWB - Blue channel gain setting */
43 #define RED 0x02 /* AWB - Red channel gain setting */
44 #define GREEN 0x03 /* AWB - Green channel gain setting */
45 #define COM1 0x04 /* Common control 1 */
46 #define BAVG 0x05 /* U/B Average Level */
47 #define GAVG 0x06 /* Y/Gb Average Level */
48 #define RAVG 0x07 /* V/R Average Level */
49 #define AECH 0x08 /* Exposure Value - AEC MSBs */
50 #define COM2 0x09 /* Common control 2 */
51 #define PID 0x0A /* Product ID Number MSB */
52 #define VER 0x0B /* Product ID Number LSB */
53 #define COM3 0x0C /* Common control 3 */
54 #define COM4 0x0D /* Common control 4 */
55 #define COM5 0x0E /* Common control 5 */
56 #define COM6 0x0F /* Common control 6 */
57 #define AEC 0x10 /* Exposure Value */
58 #define CLKRC 0x11 /* Internal clock */
59 #define COM7 0x12 /* Common control 7 */
60 #define COM8 0x13 /* Common control 8 */
61 #define COM9 0x14 /* Common control 9 */
62 #define COM10 0x15 /* Common control 10 */
63 #define REG16 0x16 /* Register 16 */
64 #define HSTART 0x17 /* Horizontal sensor size */
65 #define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */
66 #define VSTART 0x19 /* Vertical frame (row) start high 8-bit */
67 #define VSIZE 0x1A /* Vertical sensor size */
68 #define PSHFT 0x1B /* Data format - pixel delay select */
69 #define MIDH 0x1C /* Manufacturer ID byte - high */
70 #define MIDL 0x1D /* Manufacturer ID byte - low */
71 #define LAEC 0x1F /* Fine AEC value */
72 #define COM11 0x20 /* Common control 11 */
73 #define BDBASE 0x22 /* Banding filter Minimum AEC value */
74 #define DBSTEP 0x23 /* Banding filter Maximum Setp */
75 #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */
76 #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */
77 #define VPT 0x26 /* AGC/AEC Fast mode operating region */
78 #define REG28 0x28 /* Register 28 */
79 #define HOUTSIZE 0x29 /* Horizontal data output size MSBs */
80 #define EXHCH 0x2A /* Dummy pixel insert MSB */
81 #define EXHCL 0x2B /* Dummy pixel insert LSB */
82 #define VOUTSIZE 0x2C /* Vertical data output size MSBs */
83 #define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */
84 #define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */
85 #define YAVE 0x2F /* Y/G Channel Average value */
86 #define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */
87 #define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */
88 #define HREF 0x32 /* Image start and size control */
89 #define DM_LNL 0x33 /* Dummy line low 8 bits */
90 #define DM_LNH 0x34 /* Dummy line high 8 bits */
91 #define ADOFF_B 0x35 /* AD offset compensation value for B channel */
92 #define ADOFF_R 0x36 /* AD offset compensation value for R channel */
93 #define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */
94 #define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */
95 #define OFF_B 0x39 /* Analog process B channel offset value */
96 #define OFF_R 0x3A /* Analog process R channel offset value */
97 #define OFF_GB 0x3B /* Analog process Gb channel offset value */
98 #define OFF_GR 0x3C /* Analog process Gr channel offset value */
99 #define COM12 0x3D /* Common control 12 */
100 #define COM13 0x3E /* Common control 13 */
101 #define COM14 0x3F /* Common control 14 */
102 #define COM15 0x40 /* Common control 15*/
103 #define COM16 0x41 /* Common control 16 */
104 #define TGT_B 0x42 /* BLC blue channel target value */
105 #define TGT_R 0x43 /* BLC red channel target value */
106 #define TGT_GB 0x44 /* BLC Gb channel target value */
107 #define TGT_GR 0x45 /* BLC Gr channel target value */
108 /* for ov7720 */
109 #define LCC0 0x46 /* Lens correction control 0 */
110 #define LCC1 0x47 /* Lens correction option 1 - X coordinate */
111 #define LCC2 0x48 /* Lens correction option 2 - Y coordinate */
112 #define LCC3 0x49 /* Lens correction option 3 */
113 #define LCC4 0x4A /* Lens correction option 4 - radius of the circular */
114 #define LCC5 0x4B /* Lens correction option 5 */
115 #define LCC6 0x4C /* Lens correction option 6 */
116 /* for ov7725 */
117 #define LC_CTR 0x46 /* Lens correction control */
118 #define LC_XC 0x47 /* X coordinate of lens correction center relative */
119 #define LC_YC 0x48 /* Y coordinate of lens correction center relative */
120 #define LC_COEF 0x49 /* Lens correction coefficient */
121 #define LC_RADI 0x4A /* Lens correction radius */
122 #define LC_COEFB 0x4B /* Lens B channel compensation coefficient */
123 #define LC_COEFR 0x4C /* Lens R channel compensation coefficient */
124
125 #define FIXGAIN 0x4D /* Analog fix gain amplifer */
126 #define AREF0 0x4E /* Sensor reference control */
127 #define AREF1 0x4F /* Sensor reference current control */
128 #define AREF2 0x50 /* Analog reference control */
129 #define AREF3 0x51 /* ADC reference control */
130 #define AREF4 0x52 /* ADC reference control */
131 #define AREF5 0x53 /* ADC reference control */
132 #define AREF6 0x54 /* Analog reference control */
133 #define AREF7 0x55 /* Analog reference control */
134 #define UFIX 0x60 /* U channel fixed value output */
135 #define VFIX 0x61 /* V channel fixed value output */
136 #define AWBB_BLK 0x62 /* AWB option for advanced AWB */
137 #define AWB_CTRL0 0x63 /* AWB control byte 0 */
138 #define DSP_CTRL1 0x64 /* DSP control byte 1 */
139 #define DSP_CTRL2 0x65 /* DSP control byte 2 */
140 #define DSP_CTRL3 0x66 /* DSP control byte 3 */
141 #define DSP_CTRL4 0x67 /* DSP control byte 4 */
142 #define AWB_BIAS 0x68 /* AWB BLC level clip */
143 #define AWB_CTRL1 0x69 /* AWB control 1 */
144 #define AWB_CTRL2 0x6A /* AWB control 2 */
145 #define AWB_CTRL3 0x6B /* AWB control 3 */
146 #define AWB_CTRL4 0x6C /* AWB control 4 */
147 #define AWB_CTRL5 0x6D /* AWB control 5 */
148 #define AWB_CTRL6 0x6E /* AWB control 6 */
149 #define AWB_CTRL7 0x6F /* AWB control 7 */
150 #define AWB_CTRL8 0x70 /* AWB control 8 */
151 #define AWB_CTRL9 0x71 /* AWB control 9 */
152 #define AWB_CTRL10 0x72 /* AWB control 10 */
153 #define AWB_CTRL11 0x73 /* AWB control 11 */
154 #define AWB_CTRL12 0x74 /* AWB control 12 */
155 #define AWB_CTRL13 0x75 /* AWB control 13 */
156 #define AWB_CTRL14 0x76 /* AWB control 14 */
157 #define AWB_CTRL15 0x77 /* AWB control 15 */
158 #define AWB_CTRL16 0x78 /* AWB control 16 */
159 #define AWB_CTRL17 0x79 /* AWB control 17 */
160 #define AWB_CTRL18 0x7A /* AWB control 18 */
161 #define AWB_CTRL19 0x7B /* AWB control 19 */
162 #define AWB_CTRL20 0x7C /* AWB control 20 */
163 #define AWB_CTRL21 0x7D /* AWB control 21 */
164 #define GAM1 0x7E /* Gamma Curve 1st segment input end point */
165 #define GAM2 0x7F /* Gamma Curve 2nd segment input end point */
166 #define GAM3 0x80 /* Gamma Curve 3rd segment input end point */
167 #define GAM4 0x81 /* Gamma Curve 4th segment input end point */
168 #define GAM5 0x82 /* Gamma Curve 5th segment input end point */
169 #define GAM6 0x83 /* Gamma Curve 6th segment input end point */
170 #define GAM7 0x84 /* Gamma Curve 7th segment input end point */
171 #define GAM8 0x85 /* Gamma Curve 8th segment input end point */
172 #define GAM9 0x86 /* Gamma Curve 9th segment input end point */
173 #define GAM10 0x87 /* Gamma Curve 10th segment input end point */
174 #define GAM11 0x88 /* Gamma Curve 11th segment input end point */
175 #define GAM12 0x89 /* Gamma Curve 12th segment input end point */
176 #define GAM13 0x8A /* Gamma Curve 13th segment input end point */
177 #define GAM14 0x8B /* Gamma Curve 14th segment input end point */
178 #define GAM15 0x8C /* Gamma Curve 15th segment input end point */
179 #define SLOP 0x8D /* Gamma curve highest segment slope */
180 #define DNSTH 0x8E /* De-noise threshold */
181 #define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */
182 #define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
183 #define DNSOFF 0x91 /* Auto De-noise threshold control */
184 #define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */
185 #define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */
186 #define MTX1 0x94 /* Matrix coefficient 1 */
187 #define MTX2 0x95 /* Matrix coefficient 2 */
188 #define MTX3 0x96 /* Matrix coefficient 3 */
189 #define MTX4 0x97 /* Matrix coefficient 4 */
190 #define MTX5 0x98 /* Matrix coefficient 5 */
191 #define MTX6 0x99 /* Matrix coefficient 6 */
192 #define MTX_CTRL 0x9A /* Matrix control */
193 #define BRIGHT 0x9B /* Brightness control */
194 #define CNTRST 0x9C /* Contrast contrast */
195 #define CNTRST_CTRL 0x9D /* Contrast contrast center */
196 #define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */
197 #define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */
198 #define SCAL0 0xA0 /* Scaling control 0 */
199 #define SCAL1 0xA1 /* Scaling control 1 */
200 #define SCAL2 0xA2 /* Scaling control 2 */
201 #define FIFODLYM 0xA3 /* FIFO manual mode delay control */
202 #define FIFODLYA 0xA4 /* FIFO auto mode delay control */
203 #define SDE 0xA6 /* Special digital effect control */
204 #define USAT 0xA7 /* U component saturation control */
205 #define VSAT 0xA8 /* V component saturation control */
206 /* for ov7720 */
207 #define HUE0 0xA9 /* Hue control 0 */
208 #define HUE1 0xAA /* Hue control 1 */
209 /* for ov7725 */
210 #define HUECOS 0xA9 /* Cosine value */
211 #define HUESIN 0xAA /* Sine value */
212
213 #define SIGN 0xAB /* Sign bit for Hue and contrast */
214 #define DSPAUTO 0xAC /* DSP auto function ON/OFF control */
215
216 /*
217 * register detail
218 */
219
220 /* COM2 */
221 #define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */
222 /* Output drive capability */
223 #define OCAP_1x 0x00 /* 1x */
224 #define OCAP_2x 0x01 /* 2x */
225 #define OCAP_3x 0x02 /* 3x */
226 #define OCAP_4x 0x03 /* 4x */
227
228 /* COM3 */
229 #define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML)
230 #define IMG_MASK (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST)
231
232 #define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */
233 #define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */
234 #define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */
235 #define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */
236 #define SWAP_ML 0x08 /* Swap output MSB/LSB */
237 /* Tri-state option for output clock */
238 #define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */
239 /* 1: No tri-state at this period */
240 /* Tri-state option for output data */
241 #define NOTRI_DATA 0x02 /* 0: Tri-state at this period */
242 /* 1: No tri-state at this period */
243 #define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */
244
245 /* COM4 */
246 /* PLL frequency control */
247 #define PLL_BYPASS 0x00 /* 00: Bypass PLL */
248 #define PLL_4x 0x40 /* 01: PLL 4x */
249 #define PLL_6x 0x80 /* 10: PLL 6x */
250 #define PLL_8x 0xc0 /* 11: PLL 8x */
251 /* AEC evaluate window */
252 #define AEC_FULL 0x00 /* 00: Full window */
253 #define AEC_1p2 0x10 /* 01: 1/2 window */
254 #define AEC_1p4 0x20 /* 10: 1/4 window */
255 #define AEC_2p3 0x30 /* 11: Low 2/3 window */
256 #define COM4_RESERVED 0x01 /* Reserved bit */
257
258 /* COM5 */
259 #define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
260 #define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
261 /* Auto frame rate max rate control */
262 #define AFR_NO_RATE 0x00 /* No reduction of frame rate */
263 #define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
264 #define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */
265 #define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */
266 /* Auto frame rate active point control */
267 #define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */
268 #define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */
269 #define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */
270 #define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */
271 /* AEC max step control */
272 #define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
273 /* 1 : No limit to AEC increase step */
274 /* CLKRC */
275 /* Input clock divider register */
276 #define CLKRC_RESERVED 0x80 /* Reserved bit */
277 #define CLKRC_DIV(n) ((n) - 1)
278
279 /* COM7 */
280 /* SCCB Register Reset */
281 #define SCCB_RESET 0x80 /* 0 : No change */
282 /* 1 : Resets all registers to default */
283 /* Resolution selection */
284 #define SLCT_MASK 0x40 /* Mask of VGA or QVGA */
285 #define SLCT_VGA 0x00 /* 0 : VGA */
286 #define SLCT_QVGA 0x40 /* 1 : QVGA */
287 #define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */
288 #define SENSOR_RAW 0x10 /* Sensor RAW */
289 /* RGB output format control */
290 #define FMT_MASK 0x0c /* Mask of color format */
291 #define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */
292 #define FMT_RGB565 0x04 /* 01 : RGB 565 */
293 #define FMT_RGB555 0x08 /* 10 : RGB 555 */
294 #define FMT_RGB444 0x0c /* 11 : RGB 444 */
295 /* Output format control */
296 #define OFMT_MASK 0x03 /* Mask of output format */
297 #define OFMT_YUV 0x00 /* 00 : YUV */
298 #define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */
299 #define OFMT_RGB 0x02 /* 10 : RGB */
300 #define OFMT_BRAW 0x03 /* 11 : Bayer RAW */
301
302 /* COM8 */
303 #define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */
304 /* AEC Setp size limit */
305 #define UNLMT_STEP 0x40 /* 0 : Step size is limited */
306 /* 1 : Unlimited step size */
307 #define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */
308 #define AEC_BND 0x10 /* Enable AEC below banding value */
309 #define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */
310 #define AGC_ON 0x04 /* AGC Enable */
311 #define AWB_ON 0x02 /* AWB Enable */
312 #define AEC_ON 0x01 /* AEC Enable */
313
314 /* COM9 */
315 #define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */
316 /* Automatic gain ceiling - maximum AGC value */
317 #define GAIN_2x 0x00 /* 000 : 2x */
318 #define GAIN_4x 0x10 /* 001 : 4x */
319 #define GAIN_8x 0x20 /* 010 : 8x */
320 #define GAIN_16x 0x30 /* 011 : 16x */
321 #define GAIN_32x 0x40 /* 100 : 32x */
322 #define GAIN_64x 0x50 /* 101 : 64x */
323 #define GAIN_128x 0x60 /* 110 : 128x */
324 #define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */
325 #define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */
326
327 /* COM11 */
328 #define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */
329 #define SGLF_TRIG 0x01 /* Single frame transfer trigger */
330
331 /* HREF */
332 #define HREF_VSTART_SHIFT 6 /* VSTART LSB */
333 #define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */
334 #define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */
335 #define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */
336
337 /* EXHCH */
338 #define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */
339 #define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */
340
341 /* DSP_CTRL1 */
342 #define FIFO_ON 0x80 /* FIFO enable/disable selection */
343 #define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */
344 #define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */
345 #define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */
346 #define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */
347 #define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */
348 #define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */
349 #define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */
350
351 /* DSP_CTRL3 */
352 #define UV_MASK 0x80 /* UV output sequence option */
353 #define UV_ON 0x80 /* ON */
354 #define UV_OFF 0x00 /* OFF */
355 #define CBAR_MASK 0x20 /* DSP Color bar mask */
356 #define CBAR_ON 0x20 /* ON */
357 #define CBAR_OFF 0x00 /* OFF */
358
359 /* DSP_CTRL4 */
360 #define DSP_OFMT_YUV 0x00
361 #define DSP_OFMT_RGB 0x00
362 #define DSP_OFMT_RAW8 0x02
363 #define DSP_OFMT_RAW10 0x03
364
365 /* DSPAUTO (DSP Auto Function ON/OFF Control) */
366 #define AWB_ACTRL 0x80 /* AWB auto threshold control */
367 #define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */
368 #define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */
369 #define UV_ACTRL 0x10 /* UV adjust auto slope control */
370 #define SCAL0_ACTRL 0x08 /* Auto scaling factor control */
371 #define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */
372
373 #define OV772X_MAX_WIDTH VGA_WIDTH
374 #define OV772X_MAX_HEIGHT VGA_HEIGHT
375
376 /*
377 * ID
378 */
379 #define OV7720 0x7720
380 #define OV7725 0x7721
381 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
382
383 /*
384 * PLL multipliers
385 */
386 static struct {
387 unsigned int mult;
388 u8 com4;
389 } ov772x_pll[] = {
390 { 1, PLL_BYPASS, },
391 { 4, PLL_4x, },
392 { 6, PLL_6x, },
393 { 8, PLL_8x, },
394 };
395
396 /*
397 * struct
398 */
399
400 struct ov772x_color_format {
401 u32 code;
402 enum v4l2_colorspace colorspace;
403 u8 dsp3;
404 u8 dsp4;
405 u8 com3;
406 u8 com7;
407 };
408
409 struct ov772x_win_size {
410 char *name;
411 unsigned char com7_bit;
412 unsigned int sizeimage;
413 struct v4l2_rect rect;
414 };
415
416 struct ov772x_priv {
417 struct v4l2_subdev subdev;
418 struct v4l2_ctrl_handler hdl;
419 struct clk *clk;
420 struct regmap *regmap;
421 struct ov772x_camera_info *info;
422 struct gpio_desc *pwdn_gpio;
423 struct gpio_desc *rstb_gpio;
424 const struct ov772x_color_format *cfmt;
425 const struct ov772x_win_size *win;
426 struct v4l2_ctrl *vflip_ctrl;
427 struct v4l2_ctrl *hflip_ctrl;
428 unsigned int test_pattern;
429 /* band_filter = COM8[5] ? 256 - BDBASE : 0 */
430 struct v4l2_ctrl *band_filter_ctrl;
431 unsigned int fps;
432 /* lock to protect power_count and streaming */
433 struct mutex lock;
434 int power_count;
435 int streaming;
436 struct media_pad pad;
437 enum v4l2_mbus_type bus_type;
438 };
439
440 /*
441 * supported color format list
442 */
443 static const struct ov772x_color_format ov772x_cfmts[] = {
444 {
445 .code = MEDIA_BUS_FMT_YUYV8_2X8,
446 .colorspace = V4L2_COLORSPACE_SRGB,
447 .dsp3 = 0x0,
448 .dsp4 = DSP_OFMT_YUV,
449 .com3 = SWAP_YUV,
450 .com7 = OFMT_YUV,
451 },
452 {
453 .code = MEDIA_BUS_FMT_YVYU8_2X8,
454 .colorspace = V4L2_COLORSPACE_SRGB,
455 .dsp3 = UV_ON,
456 .dsp4 = DSP_OFMT_YUV,
457 .com3 = SWAP_YUV,
458 .com7 = OFMT_YUV,
459 },
460 {
461 .code = MEDIA_BUS_FMT_UYVY8_2X8,
462 .colorspace = V4L2_COLORSPACE_SRGB,
463 .dsp3 = 0x0,
464 .dsp4 = DSP_OFMT_YUV,
465 .com3 = 0x0,
466 .com7 = OFMT_YUV,
467 },
468 {
469 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
470 .colorspace = V4L2_COLORSPACE_SRGB,
471 .dsp3 = 0x0,
472 .dsp4 = DSP_OFMT_YUV,
473 .com3 = SWAP_RGB,
474 .com7 = FMT_RGB555 | OFMT_RGB,
475 },
476 {
477 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
478 .colorspace = V4L2_COLORSPACE_SRGB,
479 .dsp3 = 0x0,
480 .dsp4 = DSP_OFMT_YUV,
481 .com3 = 0x0,
482 .com7 = FMT_RGB555 | OFMT_RGB,
483 },
484 {
485 .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
486 .colorspace = V4L2_COLORSPACE_SRGB,
487 .dsp3 = 0x0,
488 .dsp4 = DSP_OFMT_YUV,
489 .com3 = SWAP_RGB,
490 .com7 = FMT_RGB565 | OFMT_RGB,
491 },
492 {
493 .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
494 .colorspace = V4L2_COLORSPACE_SRGB,
495 .dsp3 = 0x0,
496 .dsp4 = DSP_OFMT_YUV,
497 .com3 = 0x0,
498 .com7 = FMT_RGB565 | OFMT_RGB,
499 },
500 {
501 /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output,
502 * regardless of the COM7 value. We can thus only support 10-bit
503 * Bayer until someone figures it out.
504 */
505 .code = MEDIA_BUS_FMT_SBGGR10_1X10,
506 .colorspace = V4L2_COLORSPACE_SRGB,
507 .dsp3 = 0x0,
508 .dsp4 = DSP_OFMT_RAW10,
509 .com3 = 0x0,
510 .com7 = SENSOR_RAW | OFMT_BRAW,
511 },
512 };
513
514 /*
515 * window size list
516 */
517
518 static const struct ov772x_win_size ov772x_win_sizes[] = {
519 {
520 .name = "VGA",
521 .com7_bit = SLCT_VGA,
522 .sizeimage = 510 * 748,
523 .rect = {
524 .left = 140,
525 .top = 14,
526 .width = VGA_WIDTH,
527 .height = VGA_HEIGHT,
528 },
529 }, {
530 .name = "QVGA",
531 .com7_bit = SLCT_QVGA,
532 .sizeimage = 278 * 576,
533 .rect = {
534 .left = 252,
535 .top = 6,
536 .width = QVGA_WIDTH,
537 .height = QVGA_HEIGHT,
538 },
539 },
540 };
541
542 static const char * const ov772x_test_pattern_menu[] = {
543 "Disabled",
544 "Vertical Color Bar Type 1",
545 };
546
547 /*
548 * frame rate settings lists
549 */
550 static const unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 };
551
552 /*
553 * general function
554 */
555
to_ov772x(struct v4l2_subdev * sd)556 static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
557 {
558 return container_of(sd, struct ov772x_priv, subdev);
559 }
560
ov772x_reset(struct ov772x_priv * priv)561 static int ov772x_reset(struct ov772x_priv *priv)
562 {
563 int ret;
564
565 ret = regmap_write(priv->regmap, COM7, SCCB_RESET);
566 if (ret < 0)
567 return ret;
568
569 usleep_range(1000, 5000);
570
571 return regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
572 SOFT_SLEEP_MODE);
573 }
574
575 /*
576 * subdev ops
577 */
578
ov772x_s_stream(struct v4l2_subdev * sd,int enable)579 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
580 {
581 struct i2c_client *client = v4l2_get_subdevdata(sd);
582 struct ov772x_priv *priv = to_ov772x(sd);
583 int ret = 0;
584
585 mutex_lock(&priv->lock);
586
587 if (priv->streaming == enable)
588 goto done;
589
590 if (priv->bus_type == V4L2_MBUS_BT656) {
591 ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
592 enable ?
593 ITU656_ON_OFF : ~ITU656_ON_OFF);
594 if (ret)
595 goto done;
596 }
597
598 ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
599 enable ? 0 : SOFT_SLEEP_MODE);
600 if (ret)
601 goto done;
602
603 if (enable) {
604 dev_dbg(&client->dev, "format %d, win %s\n",
605 priv->cfmt->code, priv->win->name);
606 }
607 priv->streaming = enable;
608
609 done:
610 mutex_unlock(&priv->lock);
611
612 return ret;
613 }
614
ov772x_select_fps(struct ov772x_priv * priv,struct v4l2_fract * tpf)615 static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
616 struct v4l2_fract *tpf)
617 {
618 unsigned int fps = tpf->numerator ?
619 tpf->denominator / tpf->numerator :
620 tpf->denominator;
621 unsigned int best_diff;
622 unsigned int diff;
623 unsigned int idx;
624 unsigned int i;
625
626 /* Approximate to the closest supported frame interval. */
627 best_diff = ~0L;
628 for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) {
629 diff = abs(fps - ov772x_frame_intervals[i]);
630 if (diff < best_diff) {
631 idx = i;
632 best_diff = diff;
633 }
634 }
635
636 return ov772x_frame_intervals[idx];
637 }
638
ov772x_set_frame_rate(struct ov772x_priv * priv,unsigned int fps,const struct ov772x_color_format * cfmt,const struct ov772x_win_size * win)639 static int ov772x_set_frame_rate(struct ov772x_priv *priv,
640 unsigned int fps,
641 const struct ov772x_color_format *cfmt,
642 const struct ov772x_win_size *win)
643 {
644 unsigned long fin = clk_get_rate(priv->clk);
645 unsigned int best_diff;
646 unsigned int fsize;
647 unsigned int pclk;
648 unsigned int diff;
649 unsigned int i;
650 u8 clkrc = 0;
651 u8 com4 = 0;
652 int ret;
653
654 /* Use image size (with blankings) to calculate desired pixel clock. */
655 switch (cfmt->com7 & OFMT_MASK) {
656 case OFMT_BRAW:
657 fsize = win->sizeimage;
658 break;
659 case OFMT_RGB:
660 case OFMT_YUV:
661 default:
662 fsize = win->sizeimage * 2;
663 break;
664 }
665
666 pclk = fps * fsize;
667
668 /*
669 * Pixel clock generation circuit is pretty simple:
670 *
671 * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk
672 *
673 * Try to approximate the desired pixel clock testing all available
674 * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding
675 * divisor with:
676 *
677 * div = PLL_mult * Fin / pclk
678 *
679 * and re-calculate the pixel clock using it:
680 *
681 * pclk = Fin * PLL_mult / CLKRC_div
682 *
683 * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock
684 * closer to the desired one.
685 *
686 * The desired pixel clock is calculated using a known frame size
687 * (blanking included) and FPS.
688 */
689 best_diff = ~0L;
690 for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) {
691 unsigned int pll_mult = ov772x_pll[i].mult;
692 unsigned int pll_out = pll_mult * fin;
693 unsigned int t_pclk;
694 unsigned int div;
695
696 if (pll_out < pclk)
697 continue;
698
699 div = DIV_ROUND_CLOSEST(pll_out, pclk);
700 t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div);
701 diff = abs(pclk - t_pclk);
702 if (diff < best_diff) {
703 best_diff = diff;
704 clkrc = CLKRC_DIV(div);
705 com4 = ov772x_pll[i].com4;
706 }
707 }
708
709 ret = regmap_write(priv->regmap, COM4, com4 | COM4_RESERVED);
710 if (ret < 0)
711 return ret;
712
713 ret = regmap_write(priv->regmap, CLKRC, clkrc | CLKRC_RESERVED);
714 if (ret < 0)
715 return ret;
716
717 return 0;
718 }
719
ov772x_get_frame_interval(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_interval * ival)720 static int ov772x_get_frame_interval(struct v4l2_subdev *sd,
721 struct v4l2_subdev_state *sd_state,
722 struct v4l2_subdev_frame_interval *ival)
723 {
724 struct ov772x_priv *priv = to_ov772x(sd);
725 struct v4l2_fract *tpf = &ival->interval;
726
727 /*
728 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
729 * subdev active state API.
730 */
731 if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE)
732 return -EINVAL;
733
734 tpf->numerator = 1;
735 tpf->denominator = priv->fps;
736
737 return 0;
738 }
739
ov772x_set_frame_interval(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_interval * ival)740 static int ov772x_set_frame_interval(struct v4l2_subdev *sd,
741 struct v4l2_subdev_state *sd_state,
742 struct v4l2_subdev_frame_interval *ival)
743 {
744 struct ov772x_priv *priv = to_ov772x(sd);
745 struct v4l2_fract *tpf = &ival->interval;
746 unsigned int fps;
747 int ret = 0;
748
749 /*
750 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
751 * subdev active state API.
752 */
753 if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE)
754 return -EINVAL;
755
756 mutex_lock(&priv->lock);
757
758 if (priv->streaming) {
759 ret = -EBUSY;
760 goto error;
761 }
762
763 fps = ov772x_select_fps(priv, tpf);
764
765 /*
766 * If the device is not powered up by the host driver do
767 * not apply any changes to H/W at this time. Instead
768 * the frame rate will be restored right after power-up.
769 */
770 if (priv->power_count > 0) {
771 ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
772 if (ret)
773 goto error;
774 }
775
776 tpf->numerator = 1;
777 tpf->denominator = fps;
778 priv->fps = fps;
779
780 error:
781 mutex_unlock(&priv->lock);
782
783 return ret;
784 }
785
ov772x_s_ctrl(struct v4l2_ctrl * ctrl)786 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
787 {
788 struct ov772x_priv *priv = container_of(ctrl->handler,
789 struct ov772x_priv, hdl);
790 struct regmap *regmap = priv->regmap;
791 int ret = 0;
792 u8 val;
793
794 /* v4l2_ctrl_lock() locks our own mutex */
795
796 /*
797 * If the device is not powered up by the host driver do
798 * not apply any controls to H/W at this time. Instead
799 * the controls will be restored right after power-up.
800 */
801 if (priv->power_count == 0)
802 return 0;
803
804 switch (ctrl->id) {
805 case V4L2_CID_VFLIP:
806 val = ctrl->val ? VFLIP_IMG : 0x00;
807 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
808 val ^= VFLIP_IMG;
809 return regmap_update_bits(regmap, COM3, VFLIP_IMG, val);
810 case V4L2_CID_HFLIP:
811 val = ctrl->val ? HFLIP_IMG : 0x00;
812 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
813 val ^= HFLIP_IMG;
814 return regmap_update_bits(regmap, COM3, HFLIP_IMG, val);
815 case V4L2_CID_BAND_STOP_FILTER:
816 if (!ctrl->val) {
817 /* Switch the filter off, it is on now */
818 ret = regmap_update_bits(regmap, BDBASE, 0xff, 0xff);
819 if (!ret)
820 ret = regmap_update_bits(regmap, COM8,
821 BNDF_ON_OFF, 0);
822 } else {
823 /* Switch the filter on, set AEC low limit */
824 val = 256 - ctrl->val;
825 ret = regmap_update_bits(regmap, COM8,
826 BNDF_ON_OFF, BNDF_ON_OFF);
827 if (!ret)
828 ret = regmap_update_bits(regmap, BDBASE,
829 0xff, val);
830 }
831
832 return ret;
833 case V4L2_CID_TEST_PATTERN:
834 priv->test_pattern = ctrl->val;
835 return 0;
836 }
837
838 return -EINVAL;
839 }
840
841 #ifdef CONFIG_VIDEO_ADV_DEBUG
ov772x_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)842 static int ov772x_g_register(struct v4l2_subdev *sd,
843 struct v4l2_dbg_register *reg)
844 {
845 struct ov772x_priv *priv = to_ov772x(sd);
846 int ret;
847 unsigned int val;
848
849 reg->size = 1;
850 if (reg->reg > 0xff)
851 return -EINVAL;
852
853 ret = regmap_read(priv->regmap, reg->reg, &val);
854 if (ret < 0)
855 return ret;
856
857 reg->val = (__u64)val;
858
859 return 0;
860 }
861
ov772x_s_register(struct v4l2_subdev * sd,const struct v4l2_dbg_register * reg)862 static int ov772x_s_register(struct v4l2_subdev *sd,
863 const struct v4l2_dbg_register *reg)
864 {
865 struct ov772x_priv *priv = to_ov772x(sd);
866
867 if (reg->reg > 0xff ||
868 reg->val > 0xff)
869 return -EINVAL;
870
871 return regmap_write(priv->regmap, reg->reg, reg->val);
872 }
873 #endif
874
ov772x_power_on(struct ov772x_priv * priv)875 static int ov772x_power_on(struct ov772x_priv *priv)
876 {
877 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
878 int ret;
879
880 if (priv->clk) {
881 ret = clk_prepare_enable(priv->clk);
882 if (ret)
883 return ret;
884 }
885
886 if (priv->pwdn_gpio) {
887 gpiod_set_value(priv->pwdn_gpio, 1);
888 usleep_range(500, 1000);
889 }
890
891 /*
892 * FIXME: The reset signal is connected to a shared GPIO on some
893 * platforms (namely the SuperH Migo-R). Until a framework becomes
894 * available to handle this cleanly, request the GPIO temporarily
895 * to avoid conflicts.
896 */
897 priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
898 GPIOD_OUT_LOW);
899 if (IS_ERR(priv->rstb_gpio)) {
900 dev_info(&client->dev, "Unable to get GPIO \"reset\"");
901 clk_disable_unprepare(priv->clk);
902 return PTR_ERR(priv->rstb_gpio);
903 }
904
905 if (priv->rstb_gpio) {
906 gpiod_set_value(priv->rstb_gpio, 1);
907 usleep_range(500, 1000);
908 gpiod_set_value(priv->rstb_gpio, 0);
909 usleep_range(500, 1000);
910
911 gpiod_put(priv->rstb_gpio);
912 }
913
914 return 0;
915 }
916
ov772x_power_off(struct ov772x_priv * priv)917 static int ov772x_power_off(struct ov772x_priv *priv)
918 {
919 clk_disable_unprepare(priv->clk);
920
921 if (priv->pwdn_gpio) {
922 gpiod_set_value(priv->pwdn_gpio, 0);
923 usleep_range(500, 1000);
924 }
925
926 return 0;
927 }
928
929 static int ov772x_set_params(struct ov772x_priv *priv,
930 const struct ov772x_color_format *cfmt,
931 const struct ov772x_win_size *win);
932
ov772x_s_power(struct v4l2_subdev * sd,int on)933 static int ov772x_s_power(struct v4l2_subdev *sd, int on)
934 {
935 struct ov772x_priv *priv = to_ov772x(sd);
936 int ret = 0;
937
938 mutex_lock(&priv->lock);
939
940 /* If the power count is modified from 0 to != 0 or from != 0 to 0,
941 * update the power state.
942 */
943 if (priv->power_count == !on) {
944 if (on) {
945 ret = ov772x_power_on(priv);
946 /*
947 * Restore the format, the frame rate, and
948 * the controls
949 */
950 if (!ret)
951 ret = ov772x_set_params(priv, priv->cfmt,
952 priv->win);
953 } else {
954 ret = ov772x_power_off(priv);
955 }
956 }
957
958 if (!ret) {
959 /* Update the power count. */
960 priv->power_count += on ? 1 : -1;
961 WARN(priv->power_count < 0, "Unbalanced power count\n");
962 WARN(priv->power_count > 1, "Duplicated s_power call\n");
963 }
964
965 mutex_unlock(&priv->lock);
966
967 return ret;
968 }
969
ov772x_select_win(u32 width,u32 height)970 static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
971 {
972 const struct ov772x_win_size *win = &ov772x_win_sizes[0];
973 u32 best_diff = UINT_MAX;
974 unsigned int i;
975
976 for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) {
977 u32 diff = abs(width - ov772x_win_sizes[i].rect.width)
978 + abs(height - ov772x_win_sizes[i].rect.height);
979 if (diff < best_diff) {
980 best_diff = diff;
981 win = &ov772x_win_sizes[i];
982 }
983 }
984
985 return win;
986 }
987
ov772x_select_params(const struct v4l2_mbus_framefmt * mf,const struct ov772x_color_format ** cfmt,const struct ov772x_win_size ** win)988 static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf,
989 const struct ov772x_color_format **cfmt,
990 const struct ov772x_win_size **win)
991 {
992 unsigned int i;
993
994 /* Select a format. */
995 *cfmt = &ov772x_cfmts[0];
996
997 for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
998 if (mf->code == ov772x_cfmts[i].code) {
999 *cfmt = &ov772x_cfmts[i];
1000 break;
1001 }
1002 }
1003
1004 /* Select a window size. */
1005 *win = ov772x_select_win(mf->width, mf->height);
1006 }
1007
ov772x_edgectrl(struct ov772x_priv * priv)1008 static int ov772x_edgectrl(struct ov772x_priv *priv)
1009 {
1010 struct regmap *regmap = priv->regmap;
1011 int ret;
1012
1013 if (!priv->info)
1014 return 0;
1015
1016 if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
1017 /*
1018 * Manual Edge Control Mode.
1019 *
1020 * Edge auto strength bit is set by default.
1021 * Remove it when manual mode.
1022 */
1023
1024 ret = regmap_update_bits(regmap, DSPAUTO, EDGE_ACTRL, 0x00);
1025 if (ret < 0)
1026 return ret;
1027
1028 ret = regmap_update_bits(regmap, EDGE_TRSHLD,
1029 OV772X_EDGE_THRESHOLD_MASK,
1030 priv->info->edgectrl.threshold);
1031 if (ret < 0)
1032 return ret;
1033
1034 ret = regmap_update_bits(regmap, EDGE_STRNGT,
1035 OV772X_EDGE_STRENGTH_MASK,
1036 priv->info->edgectrl.strength);
1037 if (ret < 0)
1038 return ret;
1039
1040 } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
1041 /*
1042 * Auto Edge Control Mode.
1043 *
1044 * Set upper and lower limit.
1045 */
1046 ret = regmap_update_bits(regmap, EDGE_UPPER,
1047 OV772X_EDGE_UPPER_MASK,
1048 priv->info->edgectrl.upper);
1049 if (ret < 0)
1050 return ret;
1051
1052 ret = regmap_update_bits(regmap, EDGE_LOWER,
1053 OV772X_EDGE_LOWER_MASK,
1054 priv->info->edgectrl.lower);
1055 if (ret < 0)
1056 return ret;
1057 }
1058
1059 return 0;
1060 }
1061
ov772x_set_params(struct ov772x_priv * priv,const struct ov772x_color_format * cfmt,const struct ov772x_win_size * win)1062 static int ov772x_set_params(struct ov772x_priv *priv,
1063 const struct ov772x_color_format *cfmt,
1064 const struct ov772x_win_size *win)
1065 {
1066 int ret;
1067 u8 val;
1068
1069 /* Reset hardware. */
1070 ov772x_reset(priv);
1071
1072 /* Edge Ctrl. */
1073 ret = ov772x_edgectrl(priv);
1074 if (ret < 0)
1075 return ret;
1076
1077 /* Format and window size. */
1078 ret = regmap_write(priv->regmap, HSTART, win->rect.left >> 2);
1079 if (ret < 0)
1080 goto ov772x_set_fmt_error;
1081 ret = regmap_write(priv->regmap, HSIZE, win->rect.width >> 2);
1082 if (ret < 0)
1083 goto ov772x_set_fmt_error;
1084 ret = regmap_write(priv->regmap, VSTART, win->rect.top >> 1);
1085 if (ret < 0)
1086 goto ov772x_set_fmt_error;
1087 ret = regmap_write(priv->regmap, VSIZE, win->rect.height >> 1);
1088 if (ret < 0)
1089 goto ov772x_set_fmt_error;
1090 ret = regmap_write(priv->regmap, HOUTSIZE, win->rect.width >> 2);
1091 if (ret < 0)
1092 goto ov772x_set_fmt_error;
1093 ret = regmap_write(priv->regmap, VOUTSIZE, win->rect.height >> 1);
1094 if (ret < 0)
1095 goto ov772x_set_fmt_error;
1096 ret = regmap_write(priv->regmap, HREF,
1097 ((win->rect.top & 1) << HREF_VSTART_SHIFT) |
1098 ((win->rect.left & 3) << HREF_HSTART_SHIFT) |
1099 ((win->rect.height & 1) << HREF_VSIZE_SHIFT) |
1100 ((win->rect.width & 3) << HREF_HSIZE_SHIFT));
1101 if (ret < 0)
1102 goto ov772x_set_fmt_error;
1103 ret = regmap_write(priv->regmap, EXHCH,
1104 ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) |
1105 ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT));
1106 if (ret < 0)
1107 goto ov772x_set_fmt_error;
1108
1109 /* Set DSP_CTRL3. */
1110 val = cfmt->dsp3;
1111 if (val) {
1112 ret = regmap_update_bits(priv->regmap, DSP_CTRL3, UV_MASK, val);
1113 if (ret < 0)
1114 goto ov772x_set_fmt_error;
1115 }
1116
1117 /* DSP_CTRL4: AEC reference point and DSP output format. */
1118 if (cfmt->dsp4) {
1119 ret = regmap_write(priv->regmap, DSP_CTRL4, cfmt->dsp4);
1120 if (ret < 0)
1121 goto ov772x_set_fmt_error;
1122 }
1123
1124 /* Set COM3. */
1125 val = cfmt->com3;
1126 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP))
1127 val |= VFLIP_IMG;
1128 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP))
1129 val |= HFLIP_IMG;
1130 if (priv->vflip_ctrl->val)
1131 val ^= VFLIP_IMG;
1132 if (priv->hflip_ctrl->val)
1133 val ^= HFLIP_IMG;
1134 if (priv->test_pattern)
1135 val |= SCOLOR_TEST;
1136
1137 ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val);
1138 if (ret < 0)
1139 goto ov772x_set_fmt_error;
1140
1141 /* COM7: Sensor resolution and output format control. */
1142 ret = regmap_write(priv->regmap, COM7, win->com7_bit | cfmt->com7);
1143 if (ret < 0)
1144 goto ov772x_set_fmt_error;
1145
1146 /* COM4, CLKRC: Set pixel clock and framerate. */
1147 ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win);
1148 if (ret < 0)
1149 goto ov772x_set_fmt_error;
1150
1151 /* Set COM8. */
1152 if (priv->band_filter_ctrl->val) {
1153 unsigned short band_filter = priv->band_filter_ctrl->val;
1154
1155 ret = regmap_update_bits(priv->regmap, COM8,
1156 BNDF_ON_OFF, BNDF_ON_OFF);
1157 if (!ret)
1158 ret = regmap_update_bits(priv->regmap, BDBASE,
1159 0xff, 256 - band_filter);
1160 if (ret < 0)
1161 goto ov772x_set_fmt_error;
1162 }
1163
1164 return ret;
1165
1166 ov772x_set_fmt_error:
1167
1168 ov772x_reset(priv);
1169
1170 return ret;
1171 }
1172
ov772x_get_selection(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)1173 static int ov772x_get_selection(struct v4l2_subdev *sd,
1174 struct v4l2_subdev_state *sd_state,
1175 struct v4l2_subdev_selection *sel)
1176 {
1177 struct ov772x_priv *priv = to_ov772x(sd);
1178
1179 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
1180 return -EINVAL;
1181
1182 sel->r.left = 0;
1183 sel->r.top = 0;
1184 switch (sel->target) {
1185 case V4L2_SEL_TGT_CROP_BOUNDS:
1186 case V4L2_SEL_TGT_CROP:
1187 sel->r.width = priv->win->rect.width;
1188 sel->r.height = priv->win->rect.height;
1189 return 0;
1190 default:
1191 return -EINVAL;
1192 }
1193 }
1194
ov772x_get_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * format)1195 static int ov772x_get_fmt(struct v4l2_subdev *sd,
1196 struct v4l2_subdev_state *sd_state,
1197 struct v4l2_subdev_format *format)
1198 {
1199 struct v4l2_mbus_framefmt *mf = &format->format;
1200 struct ov772x_priv *priv = to_ov772x(sd);
1201
1202 if (format->pad)
1203 return -EINVAL;
1204
1205 mf->width = priv->win->rect.width;
1206 mf->height = priv->win->rect.height;
1207 mf->code = priv->cfmt->code;
1208 mf->colorspace = priv->cfmt->colorspace;
1209 mf->field = V4L2_FIELD_NONE;
1210
1211 return 0;
1212 }
1213
ov772x_set_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * format)1214 static int ov772x_set_fmt(struct v4l2_subdev *sd,
1215 struct v4l2_subdev_state *sd_state,
1216 struct v4l2_subdev_format *format)
1217 {
1218 struct ov772x_priv *priv = to_ov772x(sd);
1219 struct v4l2_mbus_framefmt *mf = &format->format;
1220 const struct ov772x_color_format *cfmt;
1221 const struct ov772x_win_size *win;
1222 int ret = 0;
1223
1224 if (format->pad)
1225 return -EINVAL;
1226
1227 ov772x_select_params(mf, &cfmt, &win);
1228
1229 mf->code = cfmt->code;
1230 mf->width = win->rect.width;
1231 mf->height = win->rect.height;
1232 mf->field = V4L2_FIELD_NONE;
1233 mf->colorspace = cfmt->colorspace;
1234 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
1235 mf->quantization = V4L2_QUANTIZATION_DEFAULT;
1236 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
1237
1238 if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
1239 *v4l2_subdev_state_get_format(sd_state, 0) = *mf;
1240 return 0;
1241 }
1242
1243 mutex_lock(&priv->lock);
1244
1245 if (priv->streaming) {
1246 ret = -EBUSY;
1247 goto error;
1248 }
1249
1250 /*
1251 * If the device is not powered up by the host driver do
1252 * not apply any changes to H/W at this time. Instead
1253 * the format will be restored right after power-up.
1254 */
1255 if (priv->power_count > 0) {
1256 ret = ov772x_set_params(priv, cfmt, win);
1257 if (ret < 0)
1258 goto error;
1259 }
1260 priv->win = win;
1261 priv->cfmt = cfmt;
1262
1263 error:
1264 mutex_unlock(&priv->lock);
1265
1266 return ret;
1267 }
1268
ov772x_video_probe(struct ov772x_priv * priv)1269 static int ov772x_video_probe(struct ov772x_priv *priv)
1270 {
1271 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
1272 int pid, ver, midh, midl;
1273 const char *devname;
1274 int ret;
1275
1276 ret = ov772x_power_on(priv);
1277 if (ret < 0)
1278 return ret;
1279
1280 /* Check and show product ID and manufacturer ID. */
1281 ret = regmap_read(priv->regmap, PID, &pid);
1282 if (ret < 0)
1283 return ret;
1284 ret = regmap_read(priv->regmap, VER, &ver);
1285 if (ret < 0)
1286 return ret;
1287
1288 switch (VERSION(pid, ver)) {
1289 case OV7720:
1290 devname = "ov7720";
1291 break;
1292 case OV7725:
1293 devname = "ov7725";
1294 break;
1295 default:
1296 dev_err(&client->dev,
1297 "Product ID error %x:%x\n", pid, ver);
1298 ret = -ENODEV;
1299 goto done;
1300 }
1301
1302 ret = regmap_read(priv->regmap, MIDH, &midh);
1303 if (ret < 0)
1304 return ret;
1305 ret = regmap_read(priv->regmap, MIDL, &midl);
1306 if (ret < 0)
1307 return ret;
1308
1309 dev_info(&client->dev,
1310 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
1311 devname, pid, ver, midh, midl);
1312
1313 ret = v4l2_ctrl_handler_setup(&priv->hdl);
1314
1315 done:
1316 ov772x_power_off(priv);
1317
1318 return ret;
1319 }
1320
1321 static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
1322 .s_ctrl = ov772x_s_ctrl,
1323 };
1324
1325 static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
1326 .log_status = v4l2_ctrl_subdev_log_status,
1327 .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1328 .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1329 #ifdef CONFIG_VIDEO_ADV_DEBUG
1330 .g_register = ov772x_g_register,
1331 .s_register = ov772x_s_register,
1332 #endif
1333 .s_power = ov772x_s_power,
1334 };
1335
ov772x_enum_frame_interval(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_interval_enum * fie)1336 static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
1337 struct v4l2_subdev_state *sd_state,
1338 struct v4l2_subdev_frame_interval_enum *fie)
1339 {
1340 if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals))
1341 return -EINVAL;
1342
1343 if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
1344 return -EINVAL;
1345 if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
1346 return -EINVAL;
1347
1348 fie->interval.numerator = 1;
1349 fie->interval.denominator = ov772x_frame_intervals[fie->index];
1350
1351 return 0;
1352 }
1353
ov772x_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)1354 static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
1355 struct v4l2_subdev_state *sd_state,
1356 struct v4l2_subdev_mbus_code_enum *code)
1357 {
1358 if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts))
1359 return -EINVAL;
1360
1361 code->code = ov772x_cfmts[code->index].code;
1362
1363 return 0;
1364 }
1365
1366 static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
1367 .s_stream = ov772x_s_stream,
1368 };
1369
1370 static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
1371 .enum_frame_interval = ov772x_enum_frame_interval,
1372 .enum_mbus_code = ov772x_enum_mbus_code,
1373 .get_selection = ov772x_get_selection,
1374 .get_fmt = ov772x_get_fmt,
1375 .set_fmt = ov772x_set_fmt,
1376 .get_frame_interval = ov772x_get_frame_interval,
1377 .set_frame_interval = ov772x_set_frame_interval,
1378 };
1379
1380 static const struct v4l2_subdev_ops ov772x_subdev_ops = {
1381 .core = &ov772x_subdev_core_ops,
1382 .video = &ov772x_subdev_video_ops,
1383 .pad = &ov772x_subdev_pad_ops,
1384 };
1385
ov772x_parse_dt(struct i2c_client * client,struct ov772x_priv * priv)1386 static int ov772x_parse_dt(struct i2c_client *client,
1387 struct ov772x_priv *priv)
1388 {
1389 struct v4l2_fwnode_endpoint bus_cfg = {
1390 .bus_type = V4L2_MBUS_PARALLEL
1391 };
1392 struct fwnode_handle *ep;
1393 int ret;
1394
1395 ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
1396 if (!ep) {
1397 dev_err(&client->dev, "Endpoint node not found\n");
1398 return -EINVAL;
1399 }
1400
1401 /*
1402 * For backward compatibility with older DTS where the
1403 * bus-type property was not mandatory, assume
1404 * V4L2_MBUS_PARALLEL as it was the only supported bus at the
1405 * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
1406 * 'bus-type' is not specified.
1407 */
1408 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
1409 if (ret) {
1410 bus_cfg = (struct v4l2_fwnode_endpoint)
1411 { .bus_type = V4L2_MBUS_BT656 };
1412 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
1413 if (ret)
1414 goto error_fwnode_put;
1415 }
1416
1417 priv->bus_type = bus_cfg.bus_type;
1418 v4l2_fwnode_endpoint_free(&bus_cfg);
1419
1420 error_fwnode_put:
1421 fwnode_handle_put(ep);
1422
1423 return ret;
1424 }
1425
1426 /*
1427 * i2c_driver function
1428 */
1429
ov772x_probe(struct i2c_client * client)1430 static int ov772x_probe(struct i2c_client *client)
1431 {
1432 struct ov772x_priv *priv;
1433 int ret;
1434 static const struct regmap_config ov772x_regmap_config = {
1435 .reg_bits = 8,
1436 .val_bits = 8,
1437 .max_register = DSPAUTO,
1438 };
1439
1440 if (!client->dev.of_node && !client->dev.platform_data) {
1441 dev_err(&client->dev,
1442 "Missing ov772x platform data for non-DT device\n");
1443 return -EINVAL;
1444 }
1445
1446 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
1447 if (!priv)
1448 return -ENOMEM;
1449
1450 priv->regmap = devm_regmap_init_sccb(client, &ov772x_regmap_config);
1451 if (IS_ERR(priv->regmap)) {
1452 dev_err(&client->dev, "Failed to allocate register map\n");
1453 return PTR_ERR(priv->regmap);
1454 }
1455
1456 priv->info = client->dev.platform_data;
1457 mutex_init(&priv->lock);
1458
1459 v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
1460 priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1461 V4L2_SUBDEV_FL_HAS_EVENTS;
1462 v4l2_ctrl_handler_init(&priv->hdl, 3);
1463 /* Use our mutex for the controls */
1464 priv->hdl.lock = &priv->lock;
1465 priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1466 V4L2_CID_VFLIP, 0, 1, 1, 0);
1467 priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1468 V4L2_CID_HFLIP, 0, 1, 1, 0);
1469 priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
1470 V4L2_CID_BAND_STOP_FILTER,
1471 0, 256, 1, 0);
1472 v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops,
1473 V4L2_CID_TEST_PATTERN,
1474 ARRAY_SIZE(ov772x_test_pattern_menu) - 1,
1475 0, 0, ov772x_test_pattern_menu);
1476 priv->subdev.ctrl_handler = &priv->hdl;
1477 if (priv->hdl.error) {
1478 ret = priv->hdl.error;
1479 goto error_ctrl_free;
1480 }
1481
1482 priv->clk = clk_get(&client->dev, NULL);
1483 if (IS_ERR(priv->clk)) {
1484 dev_err(&client->dev, "Unable to get xclk clock\n");
1485 ret = PTR_ERR(priv->clk);
1486 goto error_ctrl_free;
1487 }
1488
1489 priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
1490 GPIOD_OUT_LOW);
1491 if (IS_ERR(priv->pwdn_gpio)) {
1492 dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
1493 ret = PTR_ERR(priv->pwdn_gpio);
1494 goto error_clk_put;
1495 }
1496
1497 ret = ov772x_parse_dt(client, priv);
1498 if (ret)
1499 goto error_clk_put;
1500
1501 ret = ov772x_video_probe(priv);
1502 if (ret < 0)
1503 goto error_gpio_put;
1504
1505 priv->pad.flags = MEDIA_PAD_FL_SOURCE;
1506 priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1507 ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad);
1508 if (ret < 0)
1509 goto error_gpio_put;
1510
1511 priv->cfmt = &ov772x_cfmts[0];
1512 priv->win = &ov772x_win_sizes[0];
1513 priv->fps = 15;
1514
1515 ret = v4l2_async_register_subdev(&priv->subdev);
1516 if (ret)
1517 goto error_entity_cleanup;
1518
1519 return 0;
1520
1521 error_entity_cleanup:
1522 media_entity_cleanup(&priv->subdev.entity);
1523 error_gpio_put:
1524 if (priv->pwdn_gpio)
1525 gpiod_put(priv->pwdn_gpio);
1526 error_clk_put:
1527 clk_put(priv->clk);
1528 error_ctrl_free:
1529 v4l2_ctrl_handler_free(&priv->hdl);
1530 mutex_destroy(&priv->lock);
1531
1532 return ret;
1533 }
1534
ov772x_remove(struct i2c_client * client)1535 static void ov772x_remove(struct i2c_client *client)
1536 {
1537 struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client));
1538
1539 media_entity_cleanup(&priv->subdev.entity);
1540 clk_put(priv->clk);
1541 if (priv->pwdn_gpio)
1542 gpiod_put(priv->pwdn_gpio);
1543 v4l2_async_unregister_subdev(&priv->subdev);
1544 v4l2_ctrl_handler_free(&priv->hdl);
1545 mutex_destroy(&priv->lock);
1546 }
1547
1548 static const struct i2c_device_id ov772x_id[] = {
1549 { "ov772x" },
1550 { }
1551 };
1552 MODULE_DEVICE_TABLE(i2c, ov772x_id);
1553
1554 static const struct of_device_id ov772x_of_match[] = {
1555 { .compatible = "ovti,ov7725", },
1556 { .compatible = "ovti,ov7720", },
1557 { /* sentinel */ },
1558 };
1559 MODULE_DEVICE_TABLE(of, ov772x_of_match);
1560
1561 static struct i2c_driver ov772x_i2c_driver = {
1562 .driver = {
1563 .name = "ov772x",
1564 .of_match_table = ov772x_of_match,
1565 },
1566 .probe = ov772x_probe,
1567 .remove = ov772x_remove,
1568 .id_table = ov772x_id,
1569 };
1570
1571 module_i2c_driver(ov772x_i2c_driver);
1572
1573 MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor");
1574 MODULE_AUTHOR("Kuninori Morimoto");
1575 MODULE_LICENSE("GPL v2");
1576